summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
authorTill Kamppeter <tkamppeter@mandriva.com>2001-09-05 23:40:33 +0000
committerTill Kamppeter <tkamppeter@mandriva.com>2001-09-05 23:40:33 +0000
commit61feacca308ba9ddf80b575053a832f83f5995bd (patch)
tree7783ffffe5f57677026453fcbb45faf4dfea6dda /perl-install
parent02ecb2eea2df4511085d3b7266e36cb49f298801 (diff)
downloaddrakx-backup-do-not-use-61feacca308ba9ddf80b575053a832f83f5995bd.tar
drakx-backup-do-not-use-61feacca308ba9ddf80b575053a832f83f5995bd.tar.gz
drakx-backup-do-not-use-61feacca308ba9ddf80b575053a832f83f5995bd.tar.bz2
drakx-backup-do-not-use-61feacca308ba9ddf80b575053a832f83f5995bd.tar.xz
drakx-backup-do-not-use-61feacca308ba9ddf80b575053a832f83f5995bd.zip
Set default printer (all spoolers), manual config (CUPS), bugfixes, clean-ups.
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/printer.pm74
-rw-r--r--perl-install/printerdrake.pm180
2 files changed, 205 insertions, 49 deletions
diff --git a/perl-install/printer.pm b/perl-install/printer.pm
index 7e815e9b4..c3f7ae47d 100644
--- a/perl-install/printer.pm
+++ b/perl-install/printer.pm
@@ -469,23 +469,73 @@ sub read_cups_printer_list {
return @printerlist;
}
-sub get_cups_default_printer {
+sub set_cups_autoconf {
+ my $autoconf = $_[0];
+
+ # Read config file
local *F;
- open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
- "lpstat -d |" || return undef;
+ my $file = "$prefix/etc/sysconfig/printing";
+ if (!(-f $file)) {
+ @file_content = ();
+ } else {
+ open F, "< $file" or die "Cannot open $file!";
+ @file_content = <F>;
+ close F;
+ }
+
+ # Remove all valid "CUPS_CONFIG" lines
+ ($_ =~ /^\s*CUPS_CONFIG/ and $_="") foreach @file_content;
+
+ # Insert the new "Printcap" line
+ if ($autoconf) {
+ push @file_content, "CUPS_CONFIG=automatic\n";
+ } else {
+ push @file_content, "CUPS_CONFIG=manual\n";
+ }
+
+ # Write back modified file
+ open F, "> $file" or die "Cannot open $file!";
+ print F @file_content;
+ close F;
+
+ # Restart CUPS
+ restart_service("cups");
+
+ return 1;
+}
+
+sub get_cups_autoconf {
+ local *F;
+ open F, ("< $prefix/etc/sysconfig/printing") || return 1;
my $line;
while ($line = <F>) {
- if ($line =~ /^\s*system\s*default\s*destination:\s*(\S*)$/) {
- return $1;
+ if ($line =~ m!^[^\#]*CUPS_CONFIG=manual!) {
+ return 0;
}
}
- return undef;
+ return 1;
}
sub set_default_printer {
- my $default = $_[0];
+ my ($printer, $default) = @_;
run_program::rooted($prefix, "foomatic-configure",
- "-D", "-n", $default) || return;
+ "-D", "-s", $printer->{SPOOLER},
+ "-n", $default) || return 0;
+ return 1;
+}
+
+sub get_default_printer {
+ my $printer = $_[0];
+ local *F;
+ open F, ($::testing ? "$prefix" : "chroot $prefix/ ") .
+ "foomatic-configure -Q -s $printer->{SPOOLER} |" || return undef;
+ my $line;
+ while ($line = <F>) {
+ if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) {
+ return $1;
+ }
+ }
+ return undef;
}
sub read_cupsd_conf {
@@ -507,7 +557,7 @@ sub write_cupsd_conf {
close F;
#- restart cups after updating configuration.
- run_program::rooted($prefix, "/etc/rc.d/init.d/cups restart"); sleep 1;
+ restart_service("cups");
}
sub read_printers_conf {
@@ -607,7 +657,7 @@ sub poll_ppd_base {
#- if cups continue to modify it (because it reads the ppd files available), the
#- poll_ppd_base program simply cores :-)
run_program::rooted($prefix, "ifconfig lo 127.0.0.1"); #- else cups will not be happy! and ifup lo don't run ?
- run_program::rooted($prefix, "/etc/rc.d/init.d/cups start");
+ start_service("cups");
my $driversthere = scalar(keys %thedb);
foreach (1..60) {
local *PPDS; open PPDS, ($::testing ? "$prefix" : "chroot $prefix/ ") . "/usr/bin/poll_ppd_base -a |";
@@ -732,7 +782,7 @@ sub restart_queue($) {
for ($printer->{SPOOLER}) {
/cups/ && do {
#- restart cups.
- run_program::rooted($prefix, "/etc/rc.d/init.d/cups restart"); sleep 1;
+ restart_service("cups"); sleep 1;
last };
/lpr|lprng/ && do {
#- restart lpd.
@@ -741,7 +791,7 @@ sub restart_queue($) {
kill 'TERM', $pidlpd if $pidlpd;
unlink "$prefix$_";
}
- run_program::rooted($prefix, "lpd"); sleep 1;
+ restart_service("lpd"); sleep 1;
last };
}
# Kill the jobs
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
index e75140b36..4179b2989 100644
--- a/perl-install/printerdrake.pm
+++ b/perl-install/printerdrake.pm
@@ -40,7 +40,7 @@ sub setup_remote_cups_server {
my $queue = $printer->{OLD_QUEUE};
#- hack to handle cups remote server printing,
#- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port
- my ($server, $port, $default);
+ my ($server, $port, $default, $autoconf);
# Return value: 0 when nothing was changed ("Apply" never pressed), 1
# when "Apply" was at least pressed once.
my $retvalue = 0;
@@ -54,7 +54,7 @@ sub setup_remote_cups_server {
# Read printer list
my @queuelist = printer::read_cups_printer_list();
if ($#queuelist >=0) {
- $default = printer::get_cups_default_printer();
+ $default = printer::get_default_printer($printer);
my $queue;
for $queue (@queuelist) {
if ($queue =~ /^\s*$default/) {
@@ -65,10 +65,13 @@ sub setup_remote_cups_server {
push(@queuelist, "None");
$default = "None";
}
- #- Remember the server/port settings to check whether the user changed
- #- them.
+ #- Did we have automatic or manual configuration mode for CUPS
+ my $autoconf = printer::get_cups_autoconf();
+ #- Remember the server/port/autoconf settings to check whether the user
+ #- has changed them.
my $oldserver = $server;
my $oldport = $port;
+ my $oldautoconf = $autoconf;
#- then ask user for this combination and rewrite /etc/cups/cupsd.conf
#- according to new settings. There are no other point where such
@@ -76,7 +79,7 @@ sub setup_remote_cups_server {
if ($in->ask_from_
({ title => _("Remote CUPS server"),
- messages => _("With a remote CUPS server, you do not have to configure any
+ messages => _("With remote CUPS servers, you do not have to configure any
printer here; CUPS servers inform your machine automatically
about their printers. All printers known to your machine
currently are listed in the \"Default printer\" field. Choose
@@ -87,7 +90,14 @@ of CUPS until all remote printers are visible).
When your CUPS server is in a different network, you have to
give the CUPS server IP address and optionally the port number
to get the printer information from the server, otherwise leave
-these fields blank."),
+these fields blank.") .
+ ($::expert ? _("
+Normally, CUPS is automatically configured according to your
+network environment, so that you can access the printers on the
+CUPS servers in your local network. If this does not correctly,
+turn off \"Automatic CUPS configuration\" and edit your file
+/etc/cups/cupsd.conf manually. Do not forget to restart CUPS
+afterwards (command: \"service cups restart\").") : ()),
cancel => _("Close"),
ok => _("Apply/Re-read printers"),
callbacks => { complete => sub {
@@ -111,7 +121,10 @@ these fields blank."),
#{ val => \$default,
# format => \&translate, not_edit => 0, list => \@queuelist},
{ label => _("CUPS server IP"), val => \$server },
- { label => _("Port"), val => \$port }
+ { label => _("Port"), val => \$port },
+ ($::expert ?
+ { text => _("Automatic CUPS configuration"), type => 'bool',
+ val => \$autoconf } : ()),
]
)) {
# We have clicked "Apply/Re-read"
@@ -121,7 +134,7 @@ these fields blank."),
$default = $1;
}
if ($default ne "None") {
- printer::set_default_printer($default);
+ printer::set_default_printer($printer, $default);
}
# Set BrowsePoll line
if (($server ne $oldserver) || ($port ne $oldport)) {
@@ -141,6 +154,10 @@ these fields blank."),
printer::write_cupsd_conf(@cupsd_conf);
sleep 3;
}
+ # Set auto-configuration state
+ if ($autoconf != $oldautoconf) {
+ printer::set_cups_autoconf($autoconf);
+ }
} else {
last;
}
@@ -876,6 +893,16 @@ can get substantially slower."),
1;
}
+sub setasdefault {
+ my ($printer, $in, $defaultprinter) = @_;
+ if (($defaultprinter eq '') || # We have no default printer,
+ # so set the current one as default
+ ($in->ask_yesorno('', _("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 1))) { # Ask the user
+ printer::set_default_printer($printer, $printer->{QUEUE}) &&
+ ($defaultprinter = $printer->{QUEUE});
+ }
+}
+
sub print_testpages {
my ($printer, $in, $upNetwork) = @_;
# print test pages
@@ -955,7 +982,7 @@ It may take some time before the printer starts.\n");
}
sub copy_queues_from {
- my ($printer, $in, $oldspooler) = @_;
+ my ($printer, $in, $oldspooler, $defaultprinter) = @_;
my $newspooler = $printer->{SPOOLER};
my @oldqueues;
my @queueentries;
@@ -966,6 +993,7 @@ sub copy_queues_from {
{
my $w = $in->wait_message('', _("Reading printer data ..."));
@oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
+ @oldqueues = sort(@oldqueues);
$newspoolerstr = $printer::shortspooler_inv{$newspooler};
$oldspoolerstr = $printer::shortspooler_inv{$oldspooler};
for (@oldqueues) {
@@ -1044,11 +1072,25 @@ You can also type a new name or skip this printer.",
}}
},
[{label => _("New printer name"),val => \$newqueue}]))) {
- my $w = $in->wait_message('',
- _("Transferring %s ...", $oldqueue));
- printer::copy_foomatic_queue($printer, $oldqueue,
- $oldspooler, $newqueue) and
- $queuecopied = 1;
+ {
+ my $w = $in->wait_message('',
+ _("Transferring %s ...", $oldqueue));
+ printer::copy_foomatic_queue($printer, $oldqueue,
+ $oldspooler, $newqueue) and
+ $queuecopied = 1;
+ }
+ if ($oldqueue eq $defaultprinter) {
+ # Make the former default printer the new default
+ # printer if the user does not reject
+ if (($noninteractive) ||
+ ($in->ask_yesorno
+ (_("Transfer printer configuration"),
+ _("You have transferred your former default printer (\"%s\"),
+Should it be also the default printer under the
+new printing system %s?", $oldqueue, $newspoolerstr), 1))) {
+ printer::set_default_printer($printer, $newqueue);
+ }
+ }
}
}
}
@@ -1059,7 +1101,7 @@ You can also type a new name or skip this printer.",
}
sub setup_default_spooler {
- my ($printer, $in) = @_;
+ my ($printer, $in, $defaultprinter) = @_;
$printer->{SPOOLER} ||= 'cups';
my $oldspooler = $printer->{SPOOLER};
my $str_spooler =
@@ -1075,7 +1117,10 @@ sub setup_default_spooler {
# Get the queues of this spooler
printer::read_configured_queues($printer);
# Copy queues from former spooler
- copy_queues_from($printer, $in, $oldspooler);
+ copy_queues_from($printer, $in, $oldspooler, $defaultprinter);
+ # Re-read the printer database (CUPS has additional drivers)
+ %printer::thedb = ();
+ printer::read_printer_db($printer->{SPOOLER});
}
return $printer->{SPOOLER};
}
@@ -1150,6 +1195,11 @@ sub install_spooler {
sub main {
my ($printer, $in, $ask_multiple_printer, $upNetwork) = @_;
+ # Default printer name, we do not use "lp" so that one can switch the
+ # default printer under LPD without needing to rename another printer.
+ # Under LPD the alias "lp" will be given to the default printer.
+ my $defaultprname = _("Printer");
+
# printerdrake does not work without foomatic, and for more convenience
# we install some more stuff
{
@@ -1177,7 +1227,7 @@ sub main {
}
# Control variables for the main loop
- my ($queue, $continue, $newqueue, $editqueue, $expertswitch) = ('', 1, 0, 0, 0);
+ my ($queue, $continue, $newqueue, $editqueue, $expertswitch, $defaultprinter) = ('', 1, 0, 0, 0, '');
# Cursor position in queue modification window
my $modify = _("Printer options");
while ($continue) {
@@ -1185,6 +1235,10 @@ sub main {
# When the queue list is not shown, cancelling the printer type
# dislog should leave the program
$continue = 0;
+ # Get the default printer
+ if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '')) {
+ $defaultprinter = printer::get_default_printer($printer);
+ }
if ($editqueue) {
# The user was either in the printer modification dialog and did
# not close it or he had set up a new queue and said that the test
@@ -1201,7 +1255,7 @@ sub main {
$queue = $printer->{want} ||
$in->ask_yesorno(_("Printer"),
_("Would you like to configure printing?"),
- 0) ? 'lp' : _("Done");
+ 0) ? $defaultprname : _("Done");
if ($queue ne _("Done")) {
$printer->{SPOOLER} ||=
setup_default_spooler ($printer, $in) ||
@@ -1212,7 +1266,7 @@ sub main {
$printer->{SPOOLER} ||= setup_default_spooler ($printer, $in) || return;
# This entry and the check for this entry have to use
# the same translation to work properly
- my $spoolerentry = _("Spooler: ");
+ my $spoolerentry = _("Printing system: ");
# Show a queue list window when there is at least one queue
# or when we are in expert mode
unless ((%{$printer->{configured} || {}} == ()) &&
@@ -1231,7 +1285,13 @@ sub main {
},
# List the queues
[ { val => \$queue, format => \&translate,
- list => [ (sort keys %{$printer->{configured} || {}}),
+ sort => 0,
+ list => [ (sort(map {"$_" . ($_ eq $defaultprinter ?
+ _(" (Default)") : ())}
+ keys(%{$printer->{configured} || {}}))),
+ # CUPS makes available remote printers automatically
+ ($printer->{SPOOLER} eq "cups" ?
+ _("Printer(s) on remote CUPS server(s)") : ()),
# Button to add a new queue
_("Add printer"),
# In expert mode we can change the spooler
@@ -1241,6 +1301,15 @@ sub main {
# Bored by configuring your printers, get out of here!
_("Done") ] } ]
);
+ # Toggle expert mode and standard mode
+ if ($expertswitch) {
+ $expertswitch = 0;
+ $::expert = !$::expert;
+ # Read printer database for the new user mode
+ %printer::thedb = ();
+ printer::read_printer_db($printer->{SPOOLER});
+ next;
+ }
} else {
#- as there are no printer already configured, Add one
#- automatically.
@@ -1251,22 +1320,23 @@ sub main {
$newqueue = 1;
my %queues;
@queues{map { split '\|', $_ } keys %{$printer->{configured}}} = ();
- my $i = ''; while ($i < 100) { last unless exists $queues{"lp$i"}; ++$i; }
- $queue = "lp$i";
+ my $i = ''; while ($i < 100) { last unless exists $queues{"$defaultprname$i"}; ++$i; }
+ $queue = "$defaultprname$i";
}
+ # Function to switch to another spooler chosen
if ($queue =~ /^$spoolerentry/) {
- $printer->{SPOOLER} = setup_default_spooler ($printer, $in) || $printer->{SPOOLER};
+ $printer->{SPOOLER} = setup_default_spooler ($printer, $in, $defaultprinter) || $printer->{SPOOLER};
next;
}
- }
- # Toggle expert mode and standard mode
- if ($expertswitch) {
- $expertswitch = 0;
- $::expert = !$::expert;
- # Read printer database for the new user mode
- %printer::thedb = ();
- printer::read_printer_db($printer->{SPOOLER});
- next;
+ # Make available printers on remote CUPS servers (CUPS only).
+ if ($queue eq _("Printer(s) on remote CUPS server(s)")) {
+ setup_remote_cups_server($printer, $in);
+ next;
+ }
+ # Rip off the " (Default)" tag from the queue name
+ if ($queue =~ /^\s*(\S+)\s+/) {
+ $queue = $1;
+ }
}
# Save the default spooler
printer::set_default_spooler($printer);
@@ -1309,6 +1379,7 @@ sub main {
$printer->{complete} = 1;
printer::configure_queue($printer);
$printer->{complete} = 0;
+ setasdefault($printer, $in, $defaultprinter);
if (print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork)) {
$continue = ($::expert || !$::isInstall);
} else {
@@ -1323,7 +1394,9 @@ sub main {
What do you want to modify on this printer?",
$queue,
$printer->{configured}{$queue}{make},
- $printer->{configured}{$queue}{model}),
+ $printer->{configured}{$queue}{model} .
+ ($queue eq $defaultprinter ?
+ _(" (Default)") : ())),
cancel => _("Close"),
ok => _("Do it!")
},
@@ -1338,6 +1411,8 @@ What do you want to modify on this printer?",
($printer->{configured}{$queue}{model} ne
_("Unknown model")) ?
_("Printer options") : ()),
+ (($queue ne $defaultprinter) ?
+ _("Set this printer as the default") : ()),
_("Print test pages"),
_("Remove printer") ] } ] ) ) {
# Stay in the queue edit window until the user clicks "Close"
@@ -1385,6 +1460,13 @@ What do you want to modify on this printer?",
# Delete old queue when it was renamed
if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
printer::remove_queue($printer, $printer->{OLD_QUEUE});
+ # If the default printer was renamed, correct the
+ # the default printer setting of the spooler
+ if ($queue eq $defaultprinter) {
+ $defaultprinter = $printer->{QUEUE};
+ printer::set_default_printer($printer,
+ $printer->{QUEUE});
+ }
$queue = $printer->{QUEUE};
}
} elsif (($modify eq _("Printer manufacturer, model, driver")) ||
@@ -1435,13 +1517,37 @@ What do you want to modify on this printer?",
$printer->{complete} = 0;
};
}
+ } elsif ($modify eq _("Set this printer as the default")) {
+ if (printer::set_default_printer($printer, $queue)) {
+ $in->ask_warn(_("Default printer"),
+ _("The printer \"%s\" is set as the default printer now.", $queue));
+ } else {
+ $in->ask_warn(_("Default printer"),
+ _("Could not set \"%s\" as the default printer!", $queue));
+ }
} elsif ($modify eq _("Print test pages")) {
print_testpages($printer, $in, $upNetwork);
} elsif ($modify eq _("Remove printer")) {
- $in->ask_yesorno('',
- _("Do you really want to remove the printer \"%s\"?", $queue), 1) &&
- printer::remove_queue($printer, $queue) &&
- ($editqueue = 0);
+ if ($in->ask_yesorno('',
+ _("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
+ {
+ if (printer::remove_queue($printer, $queue)) {
+ $editqueue = 0;
+ # Define a new default printer if we have
+ # removed the default one
+ if ($queue eq $defaultprinter) {
+ my @k = sort(keys(%{$printer->{configured}}));
+ if (@k) {
+ printer::set_default_printer($printer,
+ $k[0]);
+ $defaultprinter = $k[0];
+ } else {
+ $defaultprinter = "";
+ }
+ }
+ }
+ }
+ }
}
} else {
$editqueue = 0;