- scannerdrake:

  o change all printerdrake references to system-config-printer

71 files changed, 242 insertions, 242 deletions

diff --git a/perl-install/standalone/po/af.po b/perl-install/standalone/po/af.po
index a8be0735a..665501325 100644
--- a/perl-install/standalone/po/af.po
+++ b/perl-install/standalone/po/af.po
@@ -3253,11 +3253,11 @@ msgstr "Die %s word nie ondersteun nie"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Die %s moet opgestel word deur 'printerdrake'.\n"
-"U kan printerdrake onder die %s Control Center se Hardeware gedeelte vind."
+"Die %s moet opgestel word deur 'system-config-printer'.\n"
+"U kan system-config-printer onder die %s Control Center se Hardeware gedeelte vind."
 
 #: scannerdrake:320
 #, fuzzy, c-format
diff --git a/perl-install/standalone/po/am.po b/perl-install/standalone/po/am.po
index 042302c54..13984776c 100644
--- a/perl-install/standalone/po/am.po
+++ b/perl-install/standalone/po/am.po
@@ -3090,8 +3090,8 @@ msgstr "አይደለም"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/ar.po b/perl-install/standalone/po/ar.po
index 45adc17fe..dac0d5ce1 100644
--- a/perl-install/standalone/po/ar.po
+++ b/perl-install/standalone/po/ar.po
@@ -3242,11 +3242,11 @@ msgstr "الـ%s غير مدعوم"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"يجب تهيئة %s عن طريق printerdrake.\n"
-"يمكن تشغيل PrinterDrake من مركز تحكم %s في قسم العتاد."
+"يجب تهيئة %s عن طريق system-config-printer.\n"
+"يمكن تشغيل system-config-printer من مركز تحكم %s في قسم العتاد."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/az.po b/perl-install/standalone/po/az.po
index 48877ef3c..e718b1620 100644
--- a/perl-install/standalone/po/az.po
+++ b/perl-install/standalone/po/az.po
@@ -3220,11 +3220,11 @@ msgstr "%s dəstəklənmir"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s printerdrake tərəfindən quraşdırılmalıdır.\n"
-"Printerdrake'ni Mandriva Linux İdarə Mərkəzindəki Avadanlıq bölməsindən işə "
+"%s system-config-printer tərəfindən quraşdırılmalıdır.\n"
+"system-config-printer'ni Mandriva Linux İdarə Mərkəzindəki Avadanlıq bölməsindən işə "
 "sala bilərsiniz."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/be.po b/perl-install/standalone/po/be.po
index c6d1d7a4e..36766ab36 100644
--- a/perl-install/standalone/po/be.po
+++ b/perl-install/standalone/po/be.po
@@ -3094,8 +3094,8 @@ msgstr ""
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/bg.po b/perl-install/standalone/po/bg.po
index 64b363a3f..8d3f82015 100644
--- a/perl-install/standalone/po/bg.po
+++ b/perl-install/standalone/po/bg.po
@@ -3120,8 +3120,8 @@ msgstr "%s не се подържа"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/bn.po b/perl-install/standalone/po/bn.po
index 81382e7f1..f6e5d1c70 100644
--- a/perl-install/standalone/po/bn.po
+++ b/perl-install/standalone/po/bn.po
@@ -3264,11 +3264,11 @@ msgstr "%s সাপোর্ট করেনা"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Printerdrake-এর মাধ্যমে অবশ্যই %s কনফিগার করতে হবে।\n"
-"আপনি %s কন্ট্রোল সেন্টারের হার্ডওয়্যার সেকশন থেকে printerdrake চালাতে পারেন।"
+"system-config-printer-এর মাধ্যমে অবশ্যই %s কনফিগার করতে হবে।\n"
+"আপনি %s কন্ট্রোল সেন্টারের হার্ডওয়্যার সেকশন থেকে system-config-printer চালাতে পারেন।"
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/br.po b/perl-install/standalone/po/br.po
index c68193385..701c9b9ed 100644
--- a/perl-install/standalone/po/br.po
+++ b/perl-install/standalone/po/br.po
@@ -3156,8 +3156,8 @@ msgstr "N'eo ket skoraet %s"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/bs.po b/perl-install/standalone/po/bs.po
index e0316c1ae..21c3fb708 100644
--- a/perl-install/standalone/po/bs.po
+++ b/perl-install/standalone/po/bs.po
@@ -3273,11 +3273,11 @@ msgstr "%s nije podržan"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s se mora podesiti iz printerdrake-a.\n"
-"Možete pokrenuti printerdrake iz %s Kontrolnog centra u odjeljku Hardware."
+"%s se mora podesiti iz system-config-printer-a.\n"
+"Možete pokrenuti system-config-printer iz %s Kontrolnog centra u odjeljku Hardware."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/ca.po b/perl-install/standalone/po/ca.po
index 6787cd833..596717d95 100644
--- a/perl-install/standalone/po/ca.po
+++ b/perl-install/standalone/po/ca.po
@@ -3236,11 +3236,11 @@ msgstr "No es permet l'ús de %s"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"La %s s'ha de configurar amb el printerdrake.\n"
-"Podeu executar el printerdrake des del Centre de Control %s en la secció "
+"La %s s'ha de configurar amb el system-config-printer.\n"
+"Podeu executar el system-config-printer des del Centre de Control %s en la secció "
 "Maquinari."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/cs.po b/perl-install/standalone/po/cs.po
index 9428bf209..7ae8f1372 100644
--- a/perl-install/standalone/po/cs.po
+++ b/perl-install/standalone/po/cs.po
@@ -3259,11 +3259,11 @@ msgstr "Skener %s není podporován"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Skener %s musí být nastaven pomocí nástroje PrinterDrake.\n"
-"Spustit PrinterDrake lze z ovládacího centra %s v sekci Hardware."
+"Skener %s musí být nastaven pomocí nástroje system-config-printer.\n"
+"Spustit system-config-printer lze z ovládacího centra %s v sekci Hardware."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/cy.po b/perl-install/standalone/po/cy.po
index 044373c40..24c9626f9 100644
--- a/perl-install/standalone/po/cy.po
+++ b/perl-install/standalone/po/cy.po
@@ -3275,11 +3275,11 @@ msgstr "Nid yw %s yn cael ei gynnal"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Rhaid i %s gael ei ffurfweddu gan printerdrake.\n"
-"Gallwch gychwyn printerdrake o adran Galedwedd Canolfan Rheoli %s"
+"Rhaid i %s gael ei ffurfweddu gan system-config-printer.\n"
+"Gallwch gychwyn system-config-printer o adran Galedwedd Canolfan Rheoli %s"
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/da.po b/perl-install/standalone/po/da.po
index 617d3406f..4580f67fd 100644
--- a/perl-install/standalone/po/da.po
+++ b/perl-install/standalone/po/da.po
@@ -3282,11 +3282,11 @@ msgstr "Denne %s er ikke understøttet"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Denne %s skal være konfigureret af printerdrake.\n"
-"Du kan starte printerdrake fra %s Kontrolcenter i Udstyr-afsnittet."
+"Denne %s skal være konfigureret af system-config-printer.\n"
+"Du kan starte system-config-printer fra %s Kontrolcenter i Udstyr-afsnittet."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/de.po b/perl-install/standalone/po/de.po
index d427a1e59..b9083d985 100644
--- a/perl-install/standalone/po/de.po
+++ b/perl-install/standalone/po/de.po
@@ -3299,11 +3299,11 @@ msgstr "Der Scanner „%s“ wird NICHT unterstützt"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Der %s muss von PrinterDrake konfiguriert werden.\n"
-"Sie können PrinterDrake im %s Kontrollzentrum im Hardware-Bereich starten."
+"Der %s muss von system-config-printer konfiguriert werden.\n"
+"Sie können system-config-printer im %s Kontrollzentrum im Hardware-Bereich starten."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/el.po b/perl-install/standalone/po/el.po
index b62e26895..049d0518a 100644
--- a/perl-install/standalone/po/el.po
+++ b/perl-install/standalone/po/el.po
@@ -3167,11 +3167,11 @@ msgstr "Το %s δεν υποστηρίζεται"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Το %s πρέπει να ρυθμιστεί από το printerdrake.\n"
-"Μπορείτε να εκκινήσετε το printerdrake από το Κέντρο Ελέγχου Mandriva από το "
+"Το %s πρέπει να ρυθμιστεί από το system-config-printer.\n"
+"Μπορείτε να εκκινήσετε το system-config-printer από το Κέντρο Ελέγχου Mandriva από το "
 "τμήμα Υλικό."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/eo.po b/perl-install/standalone/po/eo.po
index aae168620..0a59a4d5f 100644
--- a/perl-install/standalone/po/eo.po
+++ b/perl-install/standalone/po/eo.po
@@ -3093,8 +3093,8 @@ msgstr ""
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/es.po b/perl-install/standalone/po/es.po
index 57d461d73..5469113ad 100644
--- a/perl-install/standalone/po/es.po
+++ b/perl-install/standalone/po/es.po
@@ -3305,11 +3305,11 @@ msgstr "El %s no está soportado"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Printerdrake debe configurar el %s.\n"
-"Puede lanzar printerdrake desde el Centro de control de %s en la sección "
+"system-config-printer debe configurar el %s.\n"
+"Puede lanzar system-config-printer desde el Centro de control de %s en la sección "
 "Hardware."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/et.po b/perl-install/standalone/po/et.po
index 2bd97c264..18913ddd9 100644
--- a/perl-install/standalone/po/et.po
+++ b/perl-install/standalone/po/et.po
@@ -3257,11 +3257,11 @@ msgstr "Sel %s skänneril puudub tugi"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"See %s skänner tuleb seadistada printerdrake abil.\n"
-"Printerdrake saab käivitada %s juhtimiskeskuse riistvara sektsioonist."
+"See %s skänner tuleb seadistada system-config-printer abil.\n"
+"system-config-printer saab käivitada %s juhtimiskeskuse riistvara sektsioonist."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/eu.po b/perl-install/standalone/po/eu.po
index a3377a271..0639ad6ad 100644
--- a/perl-install/standalone/po/eu.po
+++ b/perl-install/standalone/po/eu.po
@@ -3280,11 +3280,11 @@ msgstr "%s ez da onartzen"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s printerdrake bidez konfiguratu behar da.\n"
-"Printerdrake %s kontrol-zentroko Hardwarea sekziotik abiaraz dezakezu."
+"%s system-config-printer bidez konfiguratu behar da.\n"
+"system-config-printer %s kontrol-zentroko Hardwarea sekziotik abiaraz dezakezu."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/fa.po b/perl-install/standalone/po/fa.po
index 400236df0..e43b65bcc 100644
--- a/perl-install/standalone/po/fa.po
+++ b/perl-install/standalone/po/fa.po
@@ -3260,11 +3260,11 @@ msgstr "این %s حمایت نشده است"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s باید بوسیله printerdrake پیکربندی گردد.\n"
-"می‌توانید printerdrake را از مرکز کنترل %s در قسمت سخت‌افزار اجرا کنید."
+"%s باید بوسیله system-config-printer پیکربندی گردد.\n"
+"می‌توانید system-config-printer را از مرکز کنترل %s در قسمت سخت‌افزار اجرا کنید."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/fi.po b/perl-install/standalone/po/fi.po
index fbc049774..d3536ec62 100644
--- a/perl-install/standalone/po/fi.po
+++ b/perl-install/standalone/po/fi.po
@@ -3266,8 +3266,8 @@ msgstr "Laitetta %s ei tueta"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 "%s pitää asettaa PrinterDraken kautta. Voit käynnistää\n"
 "PrinterDraken %s Ohjauskeskuksen Laitteisto-osasta."
diff --git a/perl-install/standalone/po/fr.po b/perl-install/standalone/po/fr.po
index f046dfe48..01df12960 100644
--- a/perl-install/standalone/po/fr.po
+++ b/perl-install/standalone/po/fr.po
@@ -3380,11 +3380,11 @@ msgstr "%s n'est pas supporté"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s doit être configurée par printerdrake.\n"
-"Vous pouvez lancer printerdrake depuis le Centre de Contrôle %s dans la "
+"%s doit être configurée par system-config-printer.\n"
+"Vous pouvez lancer system-config-printer depuis le Centre de Contrôle %s dans la "
 "section Matériel"
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/fur.po b/perl-install/standalone/po/fur.po
index 896dc175e..8945d90c9 100644
--- a/perl-install/standalone/po/fur.po
+++ b/perl-install/standalone/po/fur.po
@@ -3091,8 +3091,8 @@ msgstr ""
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/ga.po b/perl-install/standalone/po/ga.po
index ff3b86962..2bcfe2857 100644
--- a/perl-install/standalone/po/ga.po
+++ b/perl-install/standalone/po/ga.po
@@ -3089,8 +3089,8 @@ msgstr ""
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/gl.po b/perl-install/standalone/po/gl.po
index 4adfac074..33fdf75d2 100644
--- a/perl-install/standalone/po/gl.po
+++ b/perl-install/standalone/po/gl.po
@@ -3293,11 +3293,11 @@ msgstr "%s non está soportado"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s debe configurarse dende printerdrake.\n"
-"Pode executar printerdrake dende a sección Hardware do Centro de Control de %"
+"%s debe configurarse dende system-config-printer.\n"
+"Pode executar system-config-printer dende a sección Hardware do Centro de Control de %"
 "s."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/he.po b/perl-install/standalone/po/he.po
index ef560095e..20ead5e70 100644
--- a/perl-install/standalone/po/he.po
+++ b/perl-install/standalone/po/he.po
@@ -3246,11 +3246,11 @@ msgstr "ה%s הזה לא נתמך"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"ה %s חייב להיות מוגדר על ידי printerdrake.\n"
-"באפשרותך להפעיל את printerdrake ממרכז הבקרה %s במדור חומרה."
+"ה %s חייב להיות מוגדר על ידי system-config-printer.\n"
+"באפשרותך להפעיל את system-config-printer ממרכז הבקרה %s במדור חומרה."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/hi.po b/perl-install/standalone/po/hi.po
index 1c6a1242a..7d7f3c2a0 100644
--- a/perl-install/standalone/po/hi.po
+++ b/perl-install/standalone/po/hi.po
@@ -3191,8 +3191,8 @@ msgstr "%s को समर्थन प्राप्त नहीं है"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 "%s को प्रिंटरड्रैक के द्वारा संरचित किया जाना चाहिए । \n"
 "हार्डवेयर अनुभाग के %s नियंत्रण केन्द्र से आप प्रिंटरड्रैक को आरम्भ कर सकते है ।"
diff --git a/perl-install/standalone/po/hr.po b/perl-install/standalone/po/hr.po
index 9332fd9a3..d7ad14950 100644
--- a/perl-install/standalone/po/hr.po
+++ b/perl-install/standalone/po/hr.po
@@ -3132,11 +3132,11 @@ msgstr "Skener %s nije podržan"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Ovaj %s skener mora podesiti printerdrake.\n"
-"Možete pokrenuti printerdrake iz Mandriva kontrolnog centra uHardver "
+"Ovaj %s skener mora podesiti system-config-printer.\n"
+"Možete pokrenuti system-config-printer iz Mandriva kontrolnog centra uHardver "
 "odjeljku."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/hu.po b/perl-install/standalone/po/hu.po
index 93661eddc..bc0da9aa1 100644
--- a/perl-install/standalone/po/hu.po
+++ b/perl-install/standalone/po/hu.po
@@ -3306,10 +3306,10 @@ msgstr "Ez az eszköz nincs támogatva: %s"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"A(z) \"%s\" eszközt a PrinterDrake programmal lehet beállítani.\n"
+"A(z) \"%s\" eszközt a system-config-printer programmal lehet beállítani.\n"
 "A PrinterDrake-et a(z) %s Vezérlőközpont \"Hardver\" részében indíthatja el."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/id.po b/perl-install/standalone/po/id.po
index 993859522..e32c81425 100644
--- a/perl-install/standalone/po/id.po
+++ b/perl-install/standalone/po/id.po
@@ -3286,11 +3286,11 @@ msgstr "%s tidak didukung"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s harus dikonfigurasikan oleh printerdrake.\n"
-"Anda dapat menjalankan printerdrake dari Pusat Kontrol %s pada bagian "
+"%s harus dikonfigurasikan oleh system-config-printer.\n"
+"Anda dapat menjalankan system-config-printer dari Pusat Kontrol %s pada bagian "
 "Perangkat Keras."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/is.po b/perl-install/standalone/po/is.po
index ef332831f..8a69256c1 100644
--- a/perl-install/standalone/po/is.po
+++ b/perl-install/standalone/po/is.po
@@ -3267,11 +3267,11 @@ msgstr "Enginn stuðningur við %s"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s verður að vera uppsettur af printerdrake.\n"
-"Þú getur ræst printerdrake frá %s stjórnborðinu í vélbúnaðar-"
+"%s verður að vera uppsettur af system-config-printer.\n"
+"Þú getur ræst system-config-printer frá %s stjórnborðinu í vélbúnaðar-"
 "uppsetningahluta."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/it.po b/perl-install/standalone/po/it.po
index 0caa740af..dd40085d4 100644
--- a/perl-install/standalone/po/it.po
+++ b/perl-install/standalone/po/it.po
@@ -3290,11 +3290,11 @@ msgstr "%s non è supportato"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s deve essere configurato con printerdrake.\n"
-"Puoi lanciare printerdrake dal Centro di Controllo %s, sezione Hardware."
+"%s deve essere configurato con system-config-printer.\n"
+"Puoi lanciare system-config-printer dal Centro di Controllo %s, sezione Hardware."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/ja.po b/perl-install/standalone/po/ja.po
index 96e4eb58d..170b069ff 100644
--- a/perl-install/standalone/po/ja.po
+++ b/perl-install/standalone/po/ja.po
@@ -3257,11 +3257,11 @@ msgstr "%s はサポートしていません"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s は printerdrake で設定してください。\n"
-"printerdrakeは %s コントロールセンターのハードウェアから起動できます。"
+"%s は system-config-printer で設定してください。\n"
+"system-config-printerは %s コントロールセンターのハードウェアから起動できます。"
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/ko.po b/perl-install/standalone/po/ko.po
index 4f961242a..8bf17ab23 100644
--- a/perl-install/standalone/po/ko.po
+++ b/perl-install/standalone/po/ko.po
@@ -3100,8 +3100,8 @@ msgstr "이 스캐너 [%s]는 지원되지 않습니다."
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/ky.po b/perl-install/standalone/po/ky.po
index b79dbbf35..a2424ba11 100644
--- a/perl-install/standalone/po/ky.po
+++ b/perl-install/standalone/po/ky.po
@@ -3157,11 +3157,11 @@ msgstr "%s колдоого ээ эмес"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s printerdrake жардамы менен конфигурацияланышы керек.\n"
-"Сиз printerdrake'ти %s Башкару Борборунун Техникалык каражаттар бөлүмүнөн "
+"%s system-config-printer жардамы менен конфигурацияланышы керек.\n"
+"Сиз system-config-printer'ти %s Башкару Борборунун Техникалык каражаттар бөлүмүнөн "
 "иштетсеңиз болот."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/libDrakX-standalone.pot b/perl-install/standalone/po/libDrakX-standalone.pot
index b5bc49618..e4e8c35b4 100644
--- a/perl-install/standalone/po/libDrakX-standalone.pot
+++ b/perl-install/standalone/po/libDrakX-standalone.pot
@@ -3091,8 +3091,8 @@ msgstr ""
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/lt.po b/perl-install/standalone/po/lt.po
index e49ea2f6a..aa42868df 100644
--- a/perl-install/standalone/po/lt.po
+++ b/perl-install/standalone/po/lt.po
@@ -3093,8 +3093,8 @@ msgstr ""
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/ltg.po b/perl-install/standalone/po/ltg.po
index f8737a870..afebb7a10 100644
--- a/perl-install/standalone/po/ltg.po
+++ b/perl-install/standalone/po/ltg.po
@@ -3125,11 +3125,11 @@ msgstr "%s nateik atbolsteits"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s  juokonfigurej ar printerdrake.\n"
-"Jius varit palaist printerdrake nu %s kontrolis centra Aparaturys sekcejā."
+"%s  juokonfigurej ar system-config-printer.\n"
+"Jius varit palaist system-config-printer nu %s kontrolis centra Aparaturys sekcejā."
 
 #: scannerdrake:320
 #, fuzzy, c-format
diff --git a/perl-install/standalone/po/lv.po b/perl-install/standalone/po/lv.po
index fd2150b2e..9f79b2bb5 100644
--- a/perl-install/standalone/po/lv.po
+++ b/perl-install/standalone/po/lv.po
@@ -3124,11 +3124,11 @@ msgstr "Šis %s skeneris netiek atbalstīts"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Šis %s skeneris jākonfigurē ar printerdrake.\n"
-"Jūs varat palaist printerdrake no Mandriva kontroles centra Aparatūras "
+"Šis %s skeneris jākonfigurē ar system-config-printer.\n"
+"Jūs varat palaist system-config-printer no Mandriva kontroles centra Aparatūras "
 "sekcijā."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/mk.po b/perl-install/standalone/po/mk.po
index 4d910cb5f..0353f788e 100644
--- a/perl-install/standalone/po/mk.po
+++ b/perl-install/standalone/po/mk.po
@@ -3221,11 +3221,11 @@ msgstr "%s не е поддржан"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s треба да биде конфигуриран од страна на printerdrake.\n"
-"Можете да го вклучете printerdrake преку Мандрива Контролниот Центар во "
+"%s треба да биде конфигуриран од страна на system-config-printer.\n"
+"Можете да го вклучете system-config-printer преку Мандрива Контролниот Центар во "
 "Хардвер секцијата."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/mn.po b/perl-install/standalone/po/mn.po
index cbc6cf031..f1a841a73 100644
--- a/perl-install/standalone/po/mn.po
+++ b/perl-install/standalone/po/mn.po
@@ -3105,8 +3105,8 @@ msgstr "Сонгогдсон протокол дэмжигдээгүй."
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/ms.po b/perl-install/standalone/po/ms.po
index 62ad2dc62..7931d516b 100644
--- a/perl-install/standalone/po/ms.po
+++ b/perl-install/standalone/po/ms.po
@@ -3110,8 +3110,8 @@ msgstr "seadanya"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr "dalam Perkakasan."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/mt.po b/perl-install/standalone/po/mt.po
index 310c15289..5f07b86ad 100644
--- a/perl-install/standalone/po/mt.po
+++ b/perl-install/standalone/po/mt.po
@@ -3259,11 +3259,11 @@ msgstr "%s mhux sapportit"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s irid jiġi konfigurat minn printerdrake.\n"
-"Tista' tħaddem lill printerdrake miċ-Ċentru tal-Kontroll %s fis-sezzjoni "
+"%s irid jiġi konfigurat minn system-config-printer.\n"
+"Tista' tħaddem lill system-config-printer miċ-Ċentru tal-Kontroll %s fis-sezzjoni "
 "Ħardwer."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/nb.po b/perl-install/standalone/po/nb.po
index 0e69586c0..7856f6449 100644
--- a/perl-install/standalone/po/nb.po
+++ b/perl-install/standalone/po/nb.po
@@ -3290,10 +3290,10 @@ msgstr "%s er ikke støttet"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s må være satt opp av printerdrake.\n"
+"%s må være satt opp av system-config-printer.\n"
 "Du kan kjøre %s Kontrollsenter fra maskinvareseksjonen."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/nl.po b/perl-install/standalone/po/nl.po
index 136751302..0b099b5c8 100644
--- a/perl-install/standalone/po/nl.po
+++ b/perl-install/standalone/po/nl.po
@@ -3294,11 +3294,11 @@ msgstr "De %s is niet ondersteund"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"De %s dient geconfigureerd te worden met printerdrake.\n"
-"U kunt printerdrake opstarten vanuit het %s Configuratiecentrum in het "
+"De %s dient geconfigureerd te worden met system-config-printer.\n"
+"U kunt system-config-printer opstarten vanuit het %s Configuratiecentrum in het "
 "Apparatuur-onderdeel."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/nn.po b/perl-install/standalone/po/nn.po
index 9f7df1c2e..d25abc9ba 100644
--- a/perl-install/standalone/po/nn.po
+++ b/perl-install/standalone/po/nn.po
@@ -3254,10 +3254,10 @@ msgstr "«%s» er ikkje støtta"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s må vera sett opp av printerdrake.\n"
+"%s må vera sett opp av system-config-printer.\n"
 "Du finn programmet i %s-kontrollsenteret, under «Maskinvare»."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/pa_IN.po b/perl-install/standalone/po/pa_IN.po
index 19974c30f..9b456968f 100644
--- a/perl-install/standalone/po/pa_IN.po
+++ b/perl-install/standalone/po/pa_IN.po
@@ -3234,11 +3234,11 @@ msgstr "%s ਨੂੰ ਸਹਿਯੋਗ ਨਹੀਂ"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s printerdrake ਦੁਆਰਾ ਸੰਰਚਿਤ ਹੋਣਾ ਜਰੂਰੀ ਹੈ।\n"
-"ਤੁਸੀਂ printerdrake ਨੂੰ ਜੰਤਰ ਚੋਣ ਵਿੱਚ %s ਕੰਟਰੋਲ ਕੇਂਦਰ ਤੋਂ ਚਲਾ ਸਕਦੇ ਹੋ।"
+"%s system-config-printer ਦੁਆਰਾ ਸੰਰਚਿਤ ਹੋਣਾ ਜਰੂਰੀ ਹੈ।\n"
+"ਤੁਸੀਂ system-config-printer ਨੂੰ ਜੰਤਰ ਚੋਣ ਵਿੱਚ %s ਕੰਟਰੋਲ ਕੇਂਦਰ ਤੋਂ ਚਲਾ ਸਕਦੇ ਹੋ।"
 
 #: scannerdrake:320
 #, fuzzy, c-format
diff --git a/perl-install/standalone/po/pl.po b/perl-install/standalone/po/pl.po
index 017b124a1..711e6dabe 100644
--- a/perl-install/standalone/po/pl.po
+++ b/perl-install/standalone/po/pl.po
@@ -3297,10 +3297,10 @@ msgstr "Skaner %s nie jest obsługiwany"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Ten skaner %s musi być skonfigurowany przez program printerdrake.\n"
+"Ten skaner %s musi być skonfigurowany przez program system-config-printer.\n"
 "Można uruchomić go z Centrum Sterowania %s w dziale Sprzęt."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/pt.po b/perl-install/standalone/po/pt.po
index 0d4177bf0..a1b881f3d 100644
--- a/perl-install/standalone/po/pt.po
+++ b/perl-install/standalone/po/pt.po
@@ -3301,11 +3301,11 @@ msgstr "O %s não é suportado"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s deve ser configurado pelo printerdrake.\n"
-"Pode executar o printerdrake a partir do Centro de Controlo %s na secção "
+"%s deve ser configurado pelo system-config-printer.\n"
+"Pode executar o system-config-printer a partir do Centro de Controlo %s na secção "
 "Material."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/pt_BR.po b/perl-install/standalone/po/pt_BR.po
index 1e216617c..cc8e26872 100644
--- a/perl-install/standalone/po/pt_BR.po
+++ b/perl-install/standalone/po/pt_BR.po
@@ -3293,11 +3293,11 @@ msgstr "%s não é suportado"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s deve ser configurado pelo printerdrake.\n"
-"Você pode executar o printerdrake do Centro de Controle %s na seção Hardware."
+"%s deve ser configurado pelo system-config-printer.\n"
+"Você pode executar o system-config-printer do Centro de Controle %s na seção Hardware."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/ro.po b/perl-install/standalone/po/ro.po
index c50dd4c6e..871ce4af1 100644
--- a/perl-install/standalone/po/ro.po
+++ b/perl-install/standalone/po/ro.po
@@ -3128,11 +3128,11 @@ msgstr "Scanner-ul %s nu este susţinut "
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Scanner-ul %s trebuie configurat de către PrinterDrake.\n"
-"Puteţi lansa PrinterDrake în secţiunea Echipamente a Centrului de control "
+"Scanner-ul %s trebuie configurat de către system-config-printer.\n"
+"Puteţi lansa system-config-printer în secţiunea Echipamente a Centrului de control "
 "Mandriva Linux."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/ru.po b/perl-install/standalone/po/ru.po
index 961a4b0ca..3bb8b723a 100644
--- a/perl-install/standalone/po/ru.po
+++ b/perl-install/standalone/po/ru.po
@@ -3301,11 +3301,11 @@ msgstr "%s не поддерживается"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s должен быть настроен при помощи printerdrake.\n"
-"Вы можете запустить printerdrake из Центра управления %s в разделе Оборудование."
+"%s должен быть настроен при помощи system-config-printer.\n"
+"Вы можете запустить system-config-printer из Центра управления %s в разделе Оборудование."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/sc.po b/perl-install/standalone/po/sc.po
index 8da104c8b..599edba95 100644
--- a/perl-install/standalone/po/sc.po
+++ b/perl-install/standalone/po/sc.po
@@ -3094,8 +3094,8 @@ msgstr "Su %s no est suportau"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/sk.po b/perl-install/standalone/po/sk.po
index 7cf7cef02..597b156bc 100644
--- a/perl-install/standalone/po/sk.po
+++ b/perl-install/standalone/po/sk.po
@@ -3279,11 +3279,11 @@ msgstr "%s nie je podporovaný"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s musí byť nakonfigurovaná pomocou printerdrake.\n"
-"Môžete spustiť printerdrake z Kontrolného centra %s v hardvérovej sekcii."
+"%s musí byť nakonfigurovaná pomocou system-config-printer.\n"
+"Môžete spustiť system-config-printer z Kontrolného centra %s v hardvérovej sekcii."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/sl.po b/perl-install/standalone/po/sl.po
index dfbbeba1d..81d407cb1 100644
--- a/perl-install/standalone/po/sl.po
+++ b/perl-install/standalone/po/sl.po
@@ -3280,8 +3280,8 @@ msgstr "%s ni podprt"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 "%s morate nastaviti kot tiskalnik.\n"
 "Orodje za nastavitev tiskalnikov najdete v strojnem delu Nadzornega središča "
diff --git a/perl-install/standalone/po/sq.po b/perl-install/standalone/po/sq.po
index 9e19e8c18..2dc8391e7 100644
--- a/perl-install/standalone/po/sq.po
+++ b/perl-install/standalone/po/sq.po
@@ -3249,11 +3249,11 @@ msgstr "Ky skaner %s nuk përkrahet fare"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Skaneri %s duhet të konfigurohet nga printerdrake.\n"
-"Ju mund ta nisni printerdrake nga Qendra Kontrolluese Mandriva në sektorin "
+"Skaneri %s duhet të konfigurohet nga system-config-printer.\n"
+"Ju mund ta nisni system-config-printer nga Qendra Kontrolluese Mandriva në sektorin "
 "Hardware"
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/sr.po b/perl-install/standalone/po/sr.po
index cbbf31237..8bcf383e7 100644
--- a/perl-install/standalone/po/sr.po
+++ b/perl-install/standalone/po/sr.po
@@ -3167,11 +3167,11 @@ msgstr "%s није подржан"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Овај %s мора бити подешен у printerdrake.\n"
-"Можете покренути printerdrake из Mandriva Контролног Центра из Хардвер "
+"Овај %s мора бити подешен у system-config-printer.\n"
+"Можете покренути system-config-printer из Mandriva Контролног Центра из Хардвер "
 "секције."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/sr@Latn.po b/perl-install/standalone/po/sr@Latn.po
index 0a0637864..3abd59d77 100644
--- a/perl-install/standalone/po/sr@Latn.po
+++ b/perl-install/standalone/po/sr@Latn.po
@@ -3168,11 +3168,11 @@ msgstr "%s nije podržan"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Ovaj %s mora biti podešen u printerdrake.\n"
-"Možete pokrenuti printerdrake iz Mandriva Kontrolnog Centra iz Hardver "
+"Ovaj %s mora biti podešen u system-config-printer.\n"
+"Možete pokrenuti system-config-printer iz Mandriva Kontrolnog Centra iz Hardver "
 "sekcije."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/sv.po b/perl-install/standalone/po/sv.po
index 55b396692..4a3a0016a 100644
--- a/perl-install/standalone/po/sv.po
+++ b/perl-install/standalone/po/sv.po
@@ -3297,11 +3297,11 @@ msgstr "%s stöds inte"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s måste konfigureras av printerdrake.\n"
-"Du kan starta printerdrake från %s kontrollcentral i avdelningen Hårdvara."
+"%s måste konfigureras av system-config-printer.\n"
+"Du kan starta system-config-printer från %s kontrollcentral i avdelningen Hårdvara."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/ta.po b/perl-install/standalone/po/ta.po
index 43f45671f..dbb80a47a 100644
--- a/perl-install/standalone/po/ta.po
+++ b/perl-install/standalone/po/ta.po
@@ -3102,8 +3102,8 @@ msgstr "உங்கள் %s வருடி தற்ேபாது வேல
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 "உங்கள் %s வருடி வடிவமைக்கப்பட வேண்டும்\n"
 "அதற்கு டிரேக்அச்சு நிரலை பயன்படுத்துங்கள்"
diff --git a/perl-install/standalone/po/tg.po b/perl-install/standalone/po/tg.po
index 896e806c4..2419b5a3e 100644
--- a/perl-install/standalone/po/tg.po
+++ b/perl-install/standalone/po/tg.po
@@ -3299,11 +3299,11 @@ msgstr "%s пуштибонӣ намегардад"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s бояд ба воситаи printerdrake танзим карда шавад.\n"
-"Шумо метавонед printerdrake-ро аз %s Маркази Идора қисмати Сахтафзор сар "
+"%s бояд ба воситаи system-config-printer танзим карда шавад.\n"
+"Шумо метавонед system-config-printer-ро аз %s Маркази Идора қисмати Сахтафзор сар "
 "диҳед."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/th.po b/perl-install/standalone/po/th.po
index 15416986f..14d82bcce 100644
--- a/perl-install/standalone/po/th.po
+++ b/perl-install/standalone/po/th.po
@@ -3095,8 +3095,8 @@ msgstr ""
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/tl.po b/perl-install/standalone/po/tl.po
index 0bd0dde53..9e073f861 100644
--- a/perl-install/standalone/po/tl.po
+++ b/perl-install/standalone/po/tl.po
@@ -3275,11 +3275,11 @@ msgstr "Ang %s ay hindi suportado"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Ang %s ay dapat na-configure ng printerdrake.\n"
-"Maaari ninyong ilunsad ang printerdrake mula sa %s Control Center sa "
+"Ang %s ay dapat na-configure ng system-config-printer.\n"
+"Maaari ninyong ilunsad ang system-config-printer mula sa %s Control Center sa "
 "Hardware section."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/tr.po b/perl-install/standalone/po/tr.po
index 08329c1d4..d18caf24a 100644
--- a/perl-install/standalone/po/tr.po
+++ b/perl-install/standalone/po/tr.po
@@ -3166,11 +3166,11 @@ msgstr "%s desteklenmiyor"
 #: scannerdrake:302
 #, fuzzy, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s printerdrake ile yapılandırılmalı.\n"
-"printerdrake uygulamasını Mandriva Kontrol Merkezinin Donanım bölümünden "
+"%s system-config-printer ile yapılandırılmalı.\n"
+"system-config-printer uygulamasını Mandriva Kontrol Merkezinin Donanım bölümünden "
 "çalıştırabilirsiniz."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/uk.po b/perl-install/standalone/po/uk.po
index 1d7ddb3c0..3a82491c9 100644
--- a/perl-install/standalone/po/uk.po
+++ b/perl-install/standalone/po/uk.po
@@ -3265,11 +3265,11 @@ msgstr "Пристрій %s не підтримується"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Потрібно налаштувати %s з допомогою printerdrake.\n"
-"Ви можете запустити printerdrake з Центру Керування Мандріва в розділі %s."
+"Потрібно налаштувати %s з допомогою system-config-printer.\n"
+"Ви можете запустити system-config-printer з Центру Керування Мандріва в розділі %s."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/uz.po b/perl-install/standalone/po/uz.po
index e77ab1644..e5274c551 100644
--- a/perl-install/standalone/po/uz.po
+++ b/perl-install/standalone/po/uz.po
@@ -3126,11 +3126,11 @@ msgstr "%s qoʻllanmagan"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s Printerdrake yordamida moslanishi kerak.\n"
-"Printerdrake dasturini Mandriva boshqaruv markazining \"Asbob-uskunalar\" "
+"%s system-config-printer yordamida moslanishi kerak.\n"
+"system-config-printer dasturini Mandriva boshqaruv markazining \"Asbob-uskunalar\" "
 "boʻlimidagi \"%s\" bandidan ishga tushirishingiz mumkin."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/uz@cyrillic.po b/perl-install/standalone/po/uz@cyrillic.po
index 1d291602e..7e5cc3d16 100644
--- a/perl-install/standalone/po/uz@cyrillic.po
+++ b/perl-install/standalone/po/uz@cyrillic.po
@@ -3123,11 +3123,11 @@ msgstr "%s қўлланмаган"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s Printerdrake ёрдамида мосланиши керак.\n"
-"Printerdrake дастурини Mandriva бошқарув марказининг \"Асбоб-ускуналар\" "
+"%s system-config-printer ёрдамида мосланиши керак.\n"
+"system-config-printer дастурини Mandriva бошқарув марказининг \"Асбоб-ускуналар\" "
 "бўлимидаги \"%s\" бандидан ишга туширишингиз мумкин."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/vi.po b/perl-install/standalone/po/vi.po
index 3e7f9ff84..290dd77e0 100644
--- a/perl-install/standalone/po/vi.po
+++ b/perl-install/standalone/po/vi.po
@@ -3257,11 +3257,11 @@ msgstr "%s không được hỗ trợ"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s phải được cấu hình bằng printerdrake.\n"
-"Có thể chạy printerdrake từ Trung Tâm Điều Khiển %s trong mục Phần Cứng."
+"%s phải được cấu hình bằng system-config-printer.\n"
+"Có thể chạy system-config-printer từ Trung Tâm Điều Khiển %s trong mục Phần Cứng."
 
 #: scannerdrake:320
 #, c-format
diff --git a/perl-install/standalone/po/wa.po b/perl-install/standalone/po/wa.po
index dcc27dd91..7c4d302c9 100644
--- a/perl-install/standalone/po/wa.po
+++ b/perl-install/standalone/po/wa.po
@@ -3289,11 +3289,11 @@ msgstr "Li %s n' est nén sopoirtêye"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"Li %s doet esse apontieye pa printerdrake.\n"
-"Vos ploz enonder printerdrake a pårti do cinte di contrôle di %s, el seccion "
+"Li %s doet esse apontieye pa system-config-printer.\n"
+"Vos ploz enonder system-config-printer a pårti do cinte di contrôle di %s, el seccion "
 "«Éndjolreye»."
 
 #: scannerdrake:320
diff --git a/perl-install/standalone/po/zh_CN.po b/perl-install/standalone/po/zh_CN.po
index f4388392a..6d43c7cbe 100644
--- a/perl-install/standalone/po/zh_CN.po
+++ b/perl-install/standalone/po/zh_CN.po
@@ -3218,8 +3218,8 @@ msgstr "扫描仪 %s 不被支持"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
 "这个 %s 必须使用“Drak 打印机”来配置。\n"
 "您可以在“%s 控制中心”的“硬件”部分打开“Drak 打印机”。"
diff --git a/perl-install/standalone/po/zh_TW.po b/perl-install/standalone/po/zh_TW.po
index 0ae004a21..d5f6ac6ac 100644
--- a/perl-install/standalone/po/zh_TW.po
+++ b/perl-install/standalone/po/zh_TW.po
@@ -3214,11 +3214,11 @@ msgstr "不支援 %s"
 #: scannerdrake:302
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the %s Control Center in Hardware section."
+"The %s must be configured by system-config-printer.\n"
+"You can launch system-config-printer from the %s Control Center in Hardware section."
 msgstr ""
-"%s 必須由 printerdrake 來設定。\n"
-"您可以由 %s 控制中心的硬體項目中啟動 printerdrake。"
+"%s 必須由 system-config-printer 來設定。\n"
+"您可以由 %s 控制中心的硬體項目中啟動 system-config-printer。"
 
 #: scannerdrake:320
 #, c-format