- perl -pi -e 's!Hard drive!Hard disk drive!' (except install/steps_list.pm)

72 files changed, 293 insertions, 293 deletions

diff --git a/perl-install/install/help/help.pm b/perl-install/install/help/help.pm
index a60aec02f..2182bf63d 100644
--- a/perl-install/install/help/help.pm
+++ b/perl-install/install/help/help.pm
@@ -67,10 +67,10 @@ Each partition is listed as follows: \"Name\", \"Capacity\".
 \"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",
 \"partition number\" (for example, \"hda1\").
 
-\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and
+\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and
 \"sd\" if it is a SCSI hard disk drive.
 
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE
+\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE
 hard disk drives:
 
  * \"a\" means \"master hard disk drive on the primary IDE controller\";
@@ -536,10 +536,10 @@ Each partition is listed as follows: \"Linux name\", \"Windows name\"
 \"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",
 \"partition number\" (for example, \"hda1\").
 
-\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and
+\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and
 \"sd\" if it is a SCSI hard disk drive.
 
-\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE
+\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE
 hard disk drives:
 
  * \"a\" means \"master hard disk drive on the primary IDE controller\";
diff --git a/perl-install/install/help/po/DrakX-help.pot b/perl-install/install/help/po/DrakX-help.pot
index 81f958daa..a6ed2b546 100644
--- a/perl-install/install/help/po/DrakX-help.pot
+++ b/perl-install/install/help/po/DrakX-help.pot
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -731,10 +731,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/af.po b/perl-install/install/help/po/af.po
index 2daeb34ab..b497979c8 100644
--- a/perl-install/install/help/po/af.po
+++ b/perl-install/install/help/po/af.po
@@ -152,10 +152,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1190,10 +1190,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/am.po b/perl-install/install/help/po/am.po
index 2f4109a61..337ee9d3c 100644
--- a/perl-install/install/help/po/am.po
+++ b/perl-install/install/help/po/am.po
@@ -95,10 +95,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -727,10 +727,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ar.po b/perl-install/install/help/po/ar.po
index a5275911a..53dd78910 100644
--- a/perl-install/install/help/po/ar.po
+++ b/perl-install/install/help/po/ar.po
@@ -144,10 +144,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1215,10 +1215,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/az.po b/perl-install/install/help/po/az.po
index 06e5f3ba0..68e7a1c61 100644
--- a/perl-install/install/help/po/az.po
+++ b/perl-install/install/help/po/az.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1260,10 +1260,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/be.po b/perl-install/install/help/po/be.po
index 8e8e18c45..bb0cdb594 100644
--- a/perl-install/install/help/po/be.po
+++ b/perl-install/install/help/po/be.po
@@ -95,10 +95,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -727,10 +727,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/bg.po b/perl-install/install/help/po/bg.po
index d503d120c..7dbff4499 100644
--- a/perl-install/install/help/po/bg.po
+++ b/perl-install/install/help/po/bg.po
@@ -150,10 +150,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1131,10 +1131,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/bn.po b/perl-install/install/help/po/bn.po
index 4f4a57921..0322733c7 100644
--- a/perl-install/install/help/po/bn.po
+++ b/perl-install/install/help/po/bn.po
@@ -148,10 +148,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1037,10 +1037,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/br.po b/perl-install/install/help/po/br.po
index bb90f6ca5..489c655df 100644
--- a/perl-install/install/help/po/br.po
+++ b/perl-install/install/help/po/br.po
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -737,10 +737,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/bs.po b/perl-install/install/help/po/bs.po
index 0ed9bd845..20f6339fd 100644
--- a/perl-install/install/help/po/bs.po
+++ b/perl-install/install/help/po/bs.po
@@ -151,10 +151,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1239,10 +1239,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ca.po b/perl-install/install/help/po/ca.po
index e9b1cb8f8..a2e3d12fd 100644
--- a/perl-install/install/help/po/ca.po
+++ b/perl-install/install/help/po/ca.po
@@ -158,10 +158,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1260,10 +1260,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/cs.po b/perl-install/install/help/po/cs.po
index 201707577..a7070ca8b 100644
--- a/perl-install/install/help/po/cs.po
+++ b/perl-install/install/help/po/cs.po
@@ -142,10 +142,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1231,10 +1231,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/cy.po b/perl-install/install/help/po/cy.po
index 06e8f7f1e..3c5296b15 100644
--- a/perl-install/install/help/po/cy.po
+++ b/perl-install/install/help/po/cy.po
@@ -148,10 +148,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1188,10 +1188,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/da.po b/perl-install/install/help/po/da.po
index 656b3cd21..865e30874 100644
--- a/perl-install/install/help/po/da.po
+++ b/perl-install/install/help/po/da.po
@@ -145,10 +145,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1214,10 +1214,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/de.po b/perl-install/install/help/po/de.po
index 99f809a5d..28388283e 100644
--- a/perl-install/install/help/po/de.po
+++ b/perl-install/install/help/po/de.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1276,10 +1276,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/el.po b/perl-install/install/help/po/el.po
index c8bdd993d..d3f6566d5 100644
--- a/perl-install/install/help/po/el.po
+++ b/perl-install/install/help/po/el.po
@@ -140,10 +140,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1200,10 +1200,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/eo.po b/perl-install/install/help/po/eo.po
index 6a929c56a..5e1e4e5b8 100644
--- a/perl-install/install/help/po/eo.po
+++ b/perl-install/install/help/po/eo.po
@@ -148,10 +148,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1263,10 +1263,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/es.po b/perl-install/install/help/po/es.po
index f2b8a92a0..4bf27acee 100644
--- a/perl-install/install/help/po/es.po
+++ b/perl-install/install/help/po/es.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1290,10 +1290,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/et.po b/perl-install/install/help/po/et.po
index 979459604..bbf9e3cac 100644
--- a/perl-install/install/help/po/et.po
+++ b/perl-install/install/help/po/et.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1243,10 +1243,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/eu.po b/perl-install/install/help/po/eu.po
index ea34a69b4..0b1dc798b 100644
--- a/perl-install/install/help/po/eu.po
+++ b/perl-install/install/help/po/eu.po
@@ -146,10 +146,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1266,10 +1266,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/fa.po b/perl-install/install/help/po/fa.po
index a1825092e..0ca028505 100644
--- a/perl-install/install/help/po/fa.po
+++ b/perl-install/install/help/po/fa.po
@@ -145,10 +145,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1226,10 +1226,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/fi.po b/perl-install/install/help/po/fi.po
index 5ad859ce0..0cbd4f197 100644
--- a/perl-install/install/help/po/fi.po
+++ b/perl-install/install/help/po/fi.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1219,10 +1219,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/fr.po b/perl-install/install/help/po/fr.po
index ab9c8046e..5eb50848f 100644
--- a/perl-install/install/help/po/fr.po
+++ b/perl-install/install/help/po/fr.po
@@ -208,10 +208,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1323,10 +1323,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/fur.po b/perl-install/install/help/po/fur.po
index 1ac5a3d6c..f199dceec 100644
--- a/perl-install/install/help/po/fur.po
+++ b/perl-install/install/help/po/fur.po
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -729,10 +729,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ga.po b/perl-install/install/help/po/ga.po
index cf6fa9d88..75d769a72 100644
--- a/perl-install/install/help/po/ga.po
+++ b/perl-install/install/help/po/ga.po
@@ -94,10 +94,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -726,10 +726,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/gl.po b/perl-install/install/help/po/gl.po
index 5e39caf0f..1dd690d63 100644
--- a/perl-install/install/help/po/gl.po
+++ b/perl-install/install/help/po/gl.po
@@ -140,10 +140,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1230,10 +1230,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/he.po b/perl-install/install/help/po/he.po
index d8090b97b..7b492c2a4 100644
--- a/perl-install/install/help/po/he.po
+++ b/perl-install/install/help/po/he.po
@@ -146,10 +146,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1212,10 +1212,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/hi.po b/perl-install/install/help/po/hi.po
index 064469ef9..7f68c3f4a 100644
--- a/perl-install/install/help/po/hi.po
+++ b/perl-install/install/help/po/hi.po
@@ -145,10 +145,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1015,10 +1015,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/hr.po b/perl-install/install/help/po/hr.po
index 0455c242f..206b62942 100644
--- a/perl-install/install/help/po/hr.po
+++ b/perl-install/install/help/po/hr.po
@@ -136,10 +136,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1190,10 +1190,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/hu.po b/perl-install/install/help/po/hu.po
index b12826d15..76c5c5721 100644
--- a/perl-install/install/help/po/hu.po
+++ b/perl-install/install/help/po/hu.po
@@ -144,10 +144,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1246,10 +1246,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/id.po b/perl-install/install/help/po/id.po
index d32206e6d..9ce92e824 100644
--- a/perl-install/install/help/po/id.po
+++ b/perl-install/install/help/po/id.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1282,10 +1282,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/is.po b/perl-install/install/help/po/is.po
index b6a06c2b6..210b0f517 100644
--- a/perl-install/install/help/po/is.po
+++ b/perl-install/install/help/po/is.po
@@ -147,10 +147,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1227,10 +1227,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/it.po b/perl-install/install/help/po/it.po
index 224d80632..790bbce75 100644
--- a/perl-install/install/help/po/it.po
+++ b/perl-install/install/help/po/it.po
@@ -149,10 +149,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1307,10 +1307,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ja.po b/perl-install/install/help/po/ja.po
index 64836aea3..15656ed6a 100644
--- a/perl-install/install/help/po/ja.po
+++ b/perl-install/install/help/po/ja.po
@@ -136,10 +136,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1176,10 +1176,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ko.po b/perl-install/install/help/po/ko.po
index 1a89f07a8..5c50d5892 100644
--- a/perl-install/install/help/po/ko.po
+++ b/perl-install/install/help/po/ko.po
@@ -102,10 +102,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1021,10 +1021,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ky.po b/perl-install/install/help/po/ky.po
index d5b61ccf6..a7a555631 100644
--- a/perl-install/install/help/po/ky.po
+++ b/perl-install/install/help/po/ky.po
@@ -141,10 +141,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1148,10 +1148,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/lt.po b/perl-install/install/help/po/lt.po
index c2be6bb72..434c94cca 100644
--- a/perl-install/install/help/po/lt.po
+++ b/perl-install/install/help/po/lt.po
@@ -96,10 +96,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -942,10 +942,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ltg.po b/perl-install/install/help/po/ltg.po
index 81512fceb..cf57d4bd6 100644
--- a/perl-install/install/help/po/ltg.po
+++ b/perl-install/install/help/po/ltg.po
@@ -101,10 +101,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -942,10 +942,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/lv.po b/perl-install/install/help/po/lv.po
index 111af33d9..fed5ce4ef 100644
--- a/perl-install/install/help/po/lv.po
+++ b/perl-install/install/help/po/lv.po
@@ -103,10 +103,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -941,10 +941,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/mk.po b/perl-install/install/help/po/mk.po
index ee58e5f1e..2acdde2d9 100644
--- a/perl-install/install/help/po/mk.po
+++ b/perl-install/install/help/po/mk.po
@@ -151,10 +151,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1291,10 +1291,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/mn.po b/perl-install/install/help/po/mn.po
index bb6a1c0a9..4fcbd4227 100644
--- a/perl-install/install/help/po/mn.po
+++ b/perl-install/install/help/po/mn.po
@@ -99,10 +99,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -772,10 +772,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ms.po b/perl-install/install/help/po/ms.po
index d55a1c374..17b9ed9e2 100644
--- a/perl-install/install/help/po/ms.po
+++ b/perl-install/install/help/po/ms.po
@@ -99,10 +99,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -794,10 +794,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/mt.po b/perl-install/install/help/po/mt.po
index b62e189a8..42e7067d1 100644
--- a/perl-install/install/help/po/mt.po
+++ b/perl-install/install/help/po/mt.po
@@ -136,10 +136,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1208,10 +1208,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/nb.po b/perl-install/install/help/po/nb.po
index 7fe2b9dc9..8d8dd6ccd 100644
--- a/perl-install/install/help/po/nb.po
+++ b/perl-install/install/help/po/nb.po
@@ -159,10 +159,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1293,10 +1293,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/nl.po b/perl-install/install/help/po/nl.po
index 8d2ba4a3c..e8e2bd403 100644
--- a/perl-install/install/help/po/nl.po
+++ b/perl-install/install/help/po/nl.po
@@ -149,10 +149,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1276,10 +1276,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/nn.po b/perl-install/install/help/po/nn.po
index 6642318e0..8b7b7c81f 100644
--- a/perl-install/install/help/po/nn.po
+++ b/perl-install/install/help/po/nn.po
@@ -153,10 +153,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1207,10 +1207,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/pa_IN.po b/perl-install/install/help/po/pa_IN.po
index 198badb64..5036fb640 100644
--- a/perl-install/install/help/po/pa_IN.po
+++ b/perl-install/install/help/po/pa_IN.po
@@ -103,10 +103,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -760,10 +760,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/pl.po b/perl-install/install/help/po/pl.po
index d118f0eb4..000c6ebc4 100644
--- a/perl-install/install/help/po/pl.po
+++ b/perl-install/install/help/po/pl.po
@@ -149,10 +149,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1251,10 +1251,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/pt.po b/perl-install/install/help/po/pt.po
index db198a229..267f62ee1 100644
--- a/perl-install/install/help/po/pt.po
+++ b/perl-install/install/help/po/pt.po
@@ -152,10 +152,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1238,10 +1238,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/pt_BR.po b/perl-install/install/help/po/pt_BR.po
index 63f6f364c..92861c236 100644
--- a/perl-install/install/help/po/pt_BR.po
+++ b/perl-install/install/help/po/pt_BR.po
@@ -160,10 +160,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1282,10 +1282,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ro.po b/perl-install/install/help/po/ro.po
index 0a6b5c99f..9a48dc4dd 100644
--- a/perl-install/install/help/po/ro.po
+++ b/perl-install/install/help/po/ro.po
@@ -101,10 +101,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -733,10 +733,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ru.po b/perl-install/install/help/po/ru.po
index 67aba145b..770e3faaa 100644
--- a/perl-install/install/help/po/ru.po
+++ b/perl-install/install/help/po/ru.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -174,7 +174,7 @@ msgstr ""
 "\"Название\" разделяется на: \"тип жесткого диска\", \"номер жесткого\n"
 "диска\", \"номер раздела\" (например, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" это \"hd\", если ваш жесткий диск IDE и \"sd\", если он\n"
+"\"Hard disk drive type\" это \"hd\", если ваш жесткий диск IDE и \"sd\", если он\n"
 "SCSI.\n"
 "\n"
 "\"Номер жесткого диска\" всегда является буквой после \"hd\" или \"sd\".\n"
@@ -1240,10 +1240,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sc.po b/perl-install/install/help/po/sc.po
index 9be661ec6..24059e258 100644
--- a/perl-install/install/help/po/sc.po
+++ b/perl-install/install/help/po/sc.po
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -729,10 +729,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sk.po b/perl-install/install/help/po/sk.po
index 0144c4318..177fcc2dd 100644
--- a/perl-install/install/help/po/sk.po
+++ b/perl-install/install/help/po/sk.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1273,10 +1273,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sl.po b/perl-install/install/help/po/sl.po
index e25ba3aae..c5090e97e 100644
--- a/perl-install/install/help/po/sl.po
+++ b/perl-install/install/help/po/sl.po
@@ -150,10 +150,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1224,10 +1224,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sq.po b/perl-install/install/help/po/sq.po
index 51772db19..92a0455b1 100644
--- a/perl-install/install/help/po/sq.po
+++ b/perl-install/install/help/po/sq.po
@@ -145,10 +145,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1242,10 +1242,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sr.po b/perl-install/install/help/po/sr.po
index daa320f62..c0a8a192e 100644
--- a/perl-install/install/help/po/sr.po
+++ b/perl-install/install/help/po/sr.po
@@ -149,10 +149,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1279,10 +1279,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sr@Latn.po b/perl-install/install/help/po/sr@Latn.po
index 94bf1c5b7..147fa9245 100644
--- a/perl-install/install/help/po/sr@Latn.po
+++ b/perl-install/install/help/po/sr@Latn.po
@@ -151,10 +151,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1284,10 +1284,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/sv.po b/perl-install/install/help/po/sv.po
index 328440b41..b69e3ea27 100644
--- a/perl-install/install/help/po/sv.po
+++ b/perl-install/install/help/po/sv.po
@@ -148,10 +148,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1235,10 +1235,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/ta.po b/perl-install/install/help/po/ta.po
index 609b696ad..60f031e31 100644
--- a/perl-install/install/help/po/ta.po
+++ b/perl-install/install/help/po/ta.po
@@ -133,10 +133,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -164,10 +164,10 @@ msgstr ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1067,10 +1067,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1098,10 +1098,10 @@ msgstr ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/tg.po b/perl-install/install/help/po/tg.po
index d0a283436..415cba967 100644
--- a/perl-install/install/help/po/tg.po
+++ b/perl-install/install/help/po/tg.po
@@ -156,10 +156,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1295,10 +1295,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/th.po b/perl-install/install/help/po/th.po
index 4d546b0ff..e2f4a4384 100644
--- a/perl-install/install/help/po/th.po
+++ b/perl-install/install/help/po/th.po
@@ -97,10 +97,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -729,10 +729,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/tl.po b/perl-install/install/help/po/tl.po
index c1602ea14..b17744a07 100644
--- a/perl-install/install/help/po/tl.po
+++ b/perl-install/install/help/po/tl.po
@@ -154,10 +154,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1313,10 +1313,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/tr.po b/perl-install/install/help/po/tr.po
index ebf9a6772..90138caff 100644
--- a/perl-install/install/help/po/tr.po
+++ b/perl-install/install/help/po/tr.po
@@ -143,10 +143,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1168,10 +1168,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/uk.po b/perl-install/install/help/po/uk.po
index 08ff66fcb..042c2ace7 100644
--- a/perl-install/install/help/po/uk.po
+++ b/perl-install/install/help/po/uk.po
@@ -146,10 +146,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1236,10 +1236,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/uz.po b/perl-install/install/help/po/uz.po
index 03ff0d14e..c15043d7b 100644
--- a/perl-install/install/help/po/uz.po
+++ b/perl-install/install/help/po/uz.po
@@ -101,10 +101,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -749,10 +749,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/uz@cyrillic.po b/perl-install/install/help/po/uz@cyrillic.po
index 38a7af057..17ca71694 100644
--- a/perl-install/install/help/po/uz@cyrillic.po
+++ b/perl-install/install/help/po/uz@cyrillic.po
@@ -101,10 +101,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -748,10 +748,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/vi.po b/perl-install/install/help/po/vi.po
index bc530d27b..17ca0f116 100644
--- a/perl-install/install/help/po/vi.po
+++ b/perl-install/install/help/po/vi.po
@@ -134,10 +134,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1196,10 +1196,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/wa.po b/perl-install/install/help/po/wa.po
index abc7c5aa4..338c84c25 100644
--- a/perl-install/install/help/po/wa.po
+++ b/perl-install/install/help/po/wa.po
@@ -146,10 +146,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1267,10 +1267,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/zh_CN.po b/perl-install/install/help/po/zh_CN.po
index 14cdc89d6..a98830d47 100644
--- a/perl-install/install/help/po/zh_CN.po
+++ b/perl-install/install/help/po/zh_CN.po
@@ -129,10 +129,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1136,10 +1136,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
diff --git a/perl-install/install/help/po/zh_TW.po b/perl-install/install/help/po/zh_TW.po
index 16c1b495b..8f3015920 100644
--- a/perl-install/install/help/po/zh_TW.po
+++ b/perl-install/install/help/po/zh_TW.po
@@ -142,10 +142,10 @@ msgid ""
 "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"
@@ -1045,10 +1045,10 @@ msgid ""
 "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n"
 "\"partition number\" (for example, \"hda1\").\n"
 "\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
+"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n"
 "\"sd\" if it is a SCSI hard disk drive.\n"
 "\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
 "hard disk drives:\n"
 "\n"
 " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n"