diff options
author | Mystery Man <unknown@mandriva.org> | 2005-04-05 19:41:54 +0000 |
---|---|---|
committer | Mystery Man <unknown@mandriva.org> | 2005-04-05 19:41:54 +0000 |
commit | 1d9a4b73a37c6e942f909c2d42ca13b5c47e8362 (patch) | |
tree | 5bab4266bc57a31d97ac6a8badc2ede721a42c9c /docs/spec-DrakX-8.0.html | |
parent | 4691e29d1228b10abbe586c5ecb87ec9e13bd3ec (diff) | |
download | drakx-backup-do-not-use-10_2_20mdk.tar drakx-backup-do-not-use-10_2_20mdk.tar.gz drakx-backup-do-not-use-10_2_20mdk.tar.bz2 drakx-backup-do-not-use-10_2_20mdk.tar.xz drakx-backup-do-not-use-10_2_20mdk.zip |
This commit was manufactured by cvs2svn to create tag 'V10_2_20mdk'.V10_2_20mdk
Diffstat (limited to 'docs/spec-DrakX-8.0.html')
-rw-r--r-- | docs/spec-DrakX-8.0.html | 405 |
1 files changed, 0 insertions, 405 deletions
diff --git a/docs/spec-DrakX-8.0.html b/docs/spec-DrakX-8.0.html deleted file mode 100644 index 3fd545447..000000000 --- a/docs/spec-DrakX-8.0.html +++ /dev/null @@ -1,405 +0,0 @@ -<html><head><title>DrakX Specification for Linux-Mandrake 8.0</title></head> -<body bgcolor="#FFFFFF" link="#0066FF" vlink="#0066FF" alink="#FF0000"> -<table border="0" cellpadding="0" cellspacing="0" width="100%"> -<tr> -<td bgcolor="#99AAFF"><h2 align="left">DrakX Specification for Linux-Mandrake 8.0</h2></td></tr> -<tr><td valign="top"> -Current team of Install group is : -<p> -<table cellpadding="2" cellspacing="2" border="1" width="30%"> -<tbody> -<tr valign="Top"> -<td valign="Top">gc - -</td> -</tr> -<tr valign="Top"> -<td valign="Top">damien - -</td> -</tr> -<tr valign="Top"> -<td valign="Top">fpons - -</td> -</tr> -<tr valign="Top"> -<td valign="Top">pixel - -</td> -</tr> -</tbody> -</table> -<p> - -<pre> - - <b>Boot process (stage1)</b> - - Installation begin by booting from CD-ROM or Diskette. From CD-ROM all -installation method are available (CD, HD, NFS, FTP, HTTP) on options. From -Diskette according to image selected, only some related method (network or cdrom -or hd) are available and module managed due to size limitation to 1.44Mb. - Options are always available by pressing on F1. - - <b>DrakX process (stage2)</b> - - DrakX installation organized in steps (execution sequence described below). -Steps listed on left side and help available on bottom right side. most of the -screen is available for various dialog for interacting with the user. Steps -execution sequence is automated and described below. - -Mouse is probed and if none has been found or if the mouse has not moved, a -specific mouse configuration is displayed at the begining. - - -Before the graphical steps, there is a detection step. It detects various -hardware, including modems (from tty0 to tty7), mouse (serial, usb, ps/2) and -tablets. - - <b>Steps</b> - - <i>Choose Your language</i>: step always displayed. default choice is previous one or -<font color="#000080"><i>English</i></font>. After choosing a language, a license splash screen translated in the -chosen language is displayed with <font color="#000080"><i>Accept</i></font> and <font color="#000080"><i>Refuse</i></font> buttons. <font color="#000080"><i>Refuse</i></font> should -stop installation. <font color="#000080"><i>Accept</i></font> validate language choice which are propagated to all -DrakX visible widget. Advanced mode allow to select other language available to -be installed. Advanced mode allow to select language which will be installed on -system. - If step is redone, the license is no more displayed. - - <font color="#000080"><i>Select Install Class</i></font>: step always displayed. default choice is previous one -or <font color="#000080"><i>Recommended</i></font>. Only one other option available is <font color="#000080"><i>Customized</i></font>. Two buttons -available are <font color="#000080"><i>Install</i></font> or <font color="#000080"><i>Upgrade</i></font>. Available steps (left side) are changed -according to installation class selected, where the default is the one of -<font color="#000080"><i>Recommended</i></font> with <font color="#000080"><i>Install</i></font>. - - <font color="#000080"><i>Hard Drive Detection</i></font>: step always displayed. In recommended mode, -automatically done. In Customized mode, all modules that manage SCSI/IDE cards -are loaded automatically and a question asking for other module to load is -displayed. - If clicked later or if to the question to load other module the -answer is <font color="#000080"><i>Yes</i></font>, a list of module is displayed (or if the question to other -module to load is. When a module is chosen, two options are available -<font color="#000080"><i>Autoprobe</i></font> and <font color="#000080"><i>Specify options</i></font>. Autoprobe try to load the module without any -other user options (default module parameter). Specify options allow user to -give module parameters individually in a list for all known parameters. At this -point <font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> are available, Cancel should stop the module installation -and go to next step. If any error occurs during module installation, a question -asking to try with other parameter is displayed, the same module is still used. - - <font color="#000080"><i>Setup filesystems</i></font>: step always displayed. display a list of available choice -accoding to what has been probed. May contains <font color="#000080"><i>Use free space</i></font>, "Use existing -partition<font color="#000080"><i>, </i></font>Use the window partition for loopback<font color="#000080"><i>, </i></font>Use the free space on the -Windows partition<font color="#000080"><i>, </i></font>Remove Windows(TM)<font color="#000080"><i>|</i></font>Erase entire disk" (according to disk -configuration => only one big fat for the first case only), "Custom disk -partitioning". - If <font color="#000080"><i>Use free space</i></font> mode, auto allocation in available on available disk. - If <font color="#000080"><i>Use existing partition</i></font> mode, a list of partition named in Linux -scheme are displayed with their approximate size in Mb and propose mount point -to choose in list boxes for each partitions available on hard drive. - If <font color="#000080"><i>Use the window partition for loopback</i></font> mode, DrakX use available size -on the windows partition to create a root file and a swap file which will be -used in loopback, this means this is a lnx4win installation. - If <font color="#000080"><i>Use the free space on the Windows partition</i></font> mode, DrakX will resize -the windows partition and allocate true linux filesystem (at least / and swap). - If <font color="#000080"><i>Remove Windows(TM)</i></font>|<font color="#000080"><i>Erase entire disk</i></font> mode, DrakX clean the -partition table before auto allocating partition. - If <font color="#000080"><i>Custom disk partitioning</i></font> mode, diskdrake is launch. TO BE DEFINED to -change make diskdrake use only advanced mode. -Diskdrake show all partition of all non-removable disk graphically. All special -partition are hidden, only user accessible partition are visible: this remove -extended partition, whole disk partition on sparc platform. Clicking on a disk -notebook tab show all his partitions. Clicking on a partition show all actions -available for this partition (depend if customized or advanced mode) as well as -information on this partition (depend if customized or advanced mode). Most -diskdrake operation are done without writing on disk (exception are Resizing -partitions) and everything is written once on the disk when exiting diskdrake, -at any time if writing partition table is necessary, there are always a dialog -box asking the user to confirm the write. If no operation are modifying -partition table, no dialog is displayed on exit (for example if giving mount -point to partition). General action are available too: - <font color="#000080"><i>Clear All</i></font>: clear all partition of the given disk. - <font color="#000080"><i>Auto allocate</i></font>: try to allocate partition in available disk (not the -seen disk). - <font color="#000080"><i>Undo</i></font>: undo last operation. - <font color="#000080"><i>Done</i></font>: quit and save changes. -Other operations are available in advanced mode: - <font color="#000080"><i>Rescue partition table</i></font>: try to rescue a lost partition table, -absolutely no garantee to succeed and may destroy what could be saveable by -another tools. - <font color="#000080"><i>Reload</i></font>: reload partition table from disk, erasing all changes in -memory done by the user. - <font color="#000080"><i>Wizard</i></font>: go to partition wizard, that the partition filesystems default -behaviour on startup. - <font color="#000080"><i>Restore from floppy</i></font>: restore a partition table from previously saved -partition table from diskdrake. - <font color="#000080"><i>Save to floppy</i></font>: save partition table to floppy. - <font color="#000080"><i>Options</i></font>: global options available for filesystem configuration. This -include <font color="#000080"><i>Removable media automouting supermount</i></font> check box disabled by default. - Operation available on partition are: - <font color="#000080"><i>Mount point</i></font>: change or define mount point for partition, only -available for true filesystem partition. - <font color="#000080"><i>Resize</i></font>: resize partition, if a specific algorithm to keep data is -used no data may be lost, else all data are lost but nothing is written by -diskdrake on the partition data in this last case (this means data can be -restored by restoring original size and location). - <font color="#000080"><i>Delete</i></font>: delete partition, if the same partition is created (same type, -location, size) all data can be restored as diskdrake doesn't write on partition -data. - Operation available on partition table but in advanced mode are: - <font color="#000080"><i>Type</i></font>: change type of partition, all data will be lost but diskdrake as -above does not destroy them, and everyting can be restored. - <font color="#000080"><i>Format</i></font>: format partition, at this point, all data ARE LOST. - <font color="#000080"><i>Mount</i></font>: mount partition now, usefull for swap to increase memory -capacity for machine low on resource that are not available to complete setup -filesystem step correctly (problably if a resize partition is used on FAT fs). -allow Mounting swap on customized mode too. - A legend for partition type colors is available -(Ext2,ReiserFS,Swap,FAT,Other,Empty). It has additionnal features to create a -partition or change its type (only available in advanced mode). - - <font color="#000080"><i>Format partitions</i></font>: step always displayed. display list of partition to -format with click boxes. Some are defined according to type of partitions and if -the partition has been created or taken back. -If a partition has already been formated, it is not proposed, or if it should -not be proposed (alrady existing partition like /mnt/windows). -On Advanced tag, an additional dialog is displayed to select partition to format -(all available partition listed) and to format them with bad block checking. - - <font color="#000080"><i>Choose packages</i></font>: step always displayed. default selection done to be -<font color="#000080"><i>correct</i></font> according to size available, Install or Upgrade, Hardware available. -This selection is done according to <font color="#000080"><i>Mandrake first choice</i></font> of packages. -On all mode, display groups and main desktop used (KDE or Gnome), an -individual package selection check box is available to allow selecting package -individually. In this case, a dialog displaying a tree with groups, (Mandrake -first choice/alternatives) and packages is shown on the left part, a description -window for each packages is shown on the right part. - - <font color="#000080"><i>Install system</i></font>: step always displayed. no interactive and display -installation progression. include if available and on a CD basis a spash screen -of advertising and other (pub!). - - <font color="#000080"><i>Hardware panel</i></font>: step always displayed. show current configuration for -Mouse, Keyboard, TimeZone, Graphic/TV Card, Monitor. -At each values chosen (list boxes displayed a -synthesis description) the current dialog is removed from screen and specific -configuration panels are displayed (like currently for mouse, keyboard ...). -And end of these specific configuration panels, this one is remapped on screen -to be accepted in general. - - <b>Sub steps of Hardware panel:</b> - - <font color="#000080"><i>Configure mouse</i></font>: displayed on request or if the mouse has not been -moved (so unsafe detection), but have to be displayed earlier. A mouse tree -selection for type is displayed with default case as what is probed or -<font color="#000080"><i>serial/Generic 2 button Mouse</i></font> if none has been probed. <font color="#000080"><i>Cancel</i></font> disable mouse -modification and <font color="#000080"><i>Ok</i></font> allow next mouse configuration dialog. Then comes a serial -port dialog for serial mice (default mouse connected to COM1 if nothing found). -Then a mouse screen control is chown (according to mouse capacity: 3 buttons -with or without mouse, need 7 buttons checking ?). Here <font color="#000080"><i>Ok</i></font> validate to go to -next step and <font color="#000080"><i>Cancel</i></font> to first mouse dialog displayed (mouse tree selection for -type). - - <font color="#000080"><i>Configure keyboard</i></font>: displayed on request. default is set according to -TimeZone definition (itself defaulting to language selection at the beginning). -A list of keyboard is shown to the user and <font color="#000080"><i>Ok</i></font> validates change and return to -<font color="#000080"><i>Hardware panel</i></font> dialog with enabled change. <font color="#000080"><i>Cancel</i></font> abort any modification and -return to the same <font color="#000080"><i>Hardware panel</i></font> dialog. - - <font color="#000080"><i>Configure timezone</i></font>: displayed on request. default is set according to -language selection. A timezone tree selection is shown with only the subtree -corresponding to the current selection expanded (as other tree dialog). <font color="#000080"><i>Ok</i></font> -validates change and return to <font color="#000080"><i>Hardware panel</i></font> dialog whereas <font color="#000080"><i>Cancel</i></font> avoid -the change before returning to the same main dialog. - - <font color="#000080"><i>Graphic Card</i></font>: display graphic card probed. No change available. - - <font color="#000080"><i>TV Card</i></font>: display TV/Tuner card probed. No change available. - - <font color="#000080"><i>Monitor</i></font>: need execution of ddcxinfos at this point. Only Size, Max -resolution and depth displayed. No change available. - - - Miscellaneous step have been removed and dispatched to other steps. "Use -hard drive optimisation<font color="#000080"><i> and </i></font>Enable num lock at startup<font color="#000080"><i> are removed. </i></font>Choose -security level<font color="#000080"><i> is moved to security step. </i></font>Precise RAM size if needed" and -<font color="#000080"><i>Clean /tmp at each boot</i></font> are moved to bootloader step. -<font color="#000080"><i>Removable media automouting</i></font> is moved to diskdrake options. - - <font color="#000080"><i>Security</i></font>: step displayed only in customized mode. TO BE DEFINED. should -display at least securty level to choose. level are <font color="#000080"><i>Low</i></font>, <font color="#000080"><i>Medium</i></font>, <font color="#000080"><i>High</i></font> and -for advanced there are <font color="#000080"><i>Welcome To Crackers</i></font>, <font color="#000080"><i>Poor</i></font>, <font color="#000080"><i>Paranoid</i></font> too. - - <font color="#000080"><i>Configure networking</i></font>: step always displayed. dialog always displayed in -both <font color="#000080"><i>Recommended</i></font> and <font color="#000080"><i>Customized</i></font> mode. A list of network configuration -entries are shown with the following: - <font color="#000080"><i>Configure a normal modem connection</i></font> - <font color="#000080"><i>Configure an ISDN connection</i></font> - "Configure a DSL (or ADSL) connection - <font color="#000080"><i>Configure a cable connection</i></font> - <font color="#000080"><i>Configure local network</i></font>|<font color="#000080"><i>Reconfigure local network</i></font> - <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> - <font color="#000080"><i>Done</i></font> - By cliking on a specific item, another dialog is displayed to configure -some specific part of the network. - <font color="#000080"><i>Configure a normal modem connection</i></font>: display a question to probe for a -modem if not already detected, then if none are found or probe has been refused -a list of possible serial device are listed (in the form ttySx / COM(x+1) with -the current mouse device removed if it is serial). After that a dialog including -all parameters than can be used is shown. This includes <font color="#000080"><i>Connection Name</i></font>, -<font color="#000080"><i>Phone number</i></font>, <font color="#000080"><i>Login ID</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Authentication</i></font>, <font color="#000080"><i>Domain name</i></font>, <font color="#000080"><i>DNS 1</i></font> -and <font color="#000080"><i>DNS 2</i></font>. Authentication is a combo of <font color="#000080"><i>PAP</i></font>, <font color="#000080"><i>Termina-Based</i></font> and -<font color="#000080"><i>Script-Based</i></font> (It seems necessary to get CHAP back on this one, no way of -testing TO BE DEFINED). If no DNS are given, the connection is configured to try -using provider DNS. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> button are available. - <font color="#000080"><i>Configure an ISDN connection</i></font>: -Try to detect some PCI card. If not detected, asks if it's a ISA/pcmcia or PCI -card, and gives the list of the cards. Information are then asked: -<font color="#000080"><i>Card IRQ</i></font> only if ISA/pcmcia -<font color="#000080"><i>Card mem (DMA)</i></font> only if ISA/pcmcia -<font color="#000080"><i>Card IO</i></font> only if ISA/pcmcia -<font color="#000080"><i>Card IO_0</i></font> only if ISA/pcmcia with io0 -<font color="#000080"><i>Card IO_1</i></font> only if ISA/pcmcia with io1 -<font color="#000080"><i>Your personal phone number</i></font> phone -<font color="#000080"><i>Provider name (ex provider.net)</i></font> -<font color="#000080"><i>Provider phone number</i></font> -<font color="#000080"><i>Provider dns 1</i></font> -<font color="#000080"><i>Provider dns 2</i></font> -<font color="#000080"><i>Dialing mode</i></font> auto or manual -<font color="#000080"><i>Account Login (user name)</i></font> -<font color="#000080"><i>Account Password</i></font> hided -<font color="#000080"><i>Confirm Password</i></font> again - <font color="#000080"><i>Configure a DLS (or ADSL) connection</i></font>: -The user chooses between pptp, pppoe and dhcp. If dhcp, redirection to LAN. -If there is more than one ethernet card, The user must choose the card to use -(displayed with the module). After that, some informations are asked: -<font color="#000080"><i>Provider name (ex provider.net)</i></font> -<font color="#000080"><i>Provider dns 1</i></font> -<font color="#000080"><i>Provider dns 2</i></font> -<font color="#000080"><i>Account Login (user name)</i></font> -<font color="#000080"><i>Account Password</i></font> hided -<font color="#000080"><i>Confirm Password</i></font> again - <font color="#000080"><i>Configure a cable connection</i></font>: redirection to LAN - <font color="#000080"><i>Configure local network</i></font>: display what has been probed with a question -about using another module and <font color="#000080"><i>Yes</i></font>, <font color="#000080"><i>No</i></font> and <font color="#000080"><i>See hardware info</i></font> buttons. -<font color="#000080"><i>No</i></font> is the default. If <font color="#000080"><i>Yes</i></font> is clicked a list of modules is displayed with -<font color="#000080"><i>Ok</i></font> or <font color="#000080"><i>Cancel</i></font> buttons available. <font color="#000080"><i>Cancel</i></font> should go back to previous -question. If <font color="#000080"><i>See hardware info</i></font> is clicked a list of probed hardware is -displayed. If <font color="#000080"><i>Yes</i></font> is clicked, for each ethernet interface, a dialog asking for -IP address, Netmask and Automatic IP check box (DHCP/BOOTP) is displayed. Then -if DHCP has been chosen, only a dialog asking for Host name and another for HTTP -proxy and FTP proxy if any. If DHCP has not been chosen, an IP address has to be -defined and a dialog including <font color="#000080"><i>Host name</i></font>, <font color="#000080"><i>DNS server</i></font>, <font color="#000080"><i>Gateway</i></font> and "Gateway -device" is displayed. Then the same HTTP proxy and FTP proxy dialog as above. As -network configuration may to have been reworked a bit it has TO BE DEFINED if -this is kept like that or not. - <font color="#000080"><i>Disable networking</i></font>|<font color="#000080"><i>Enable networking</i></font> is just a way to toggle -networking on or off, may be to be accessible only for advanced mode. - <font color="#000080"><i>Quit</i></font> exit the network step. - -<b>NETWORK ADVANCED DOCUMENTATION:</b> -Here is a list of entry points available in post install without using the ugly -install graphic toolkit: - -<a href=<font color="#000080"><i>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</i></font>>http://www.mandrakesoft.com/~damien/html/draknet_advanced_doc.txt</a> - - <font color="#000080"><i>Configure Printer</i></font>: step always displayed. In recommended mode, only -activated if a local printer is detected, else no printer are configured by -default. In customized mode or if the step has been clicked a list of printer -already configured is displayed and the possibility to add or exit the -configuration. It allow configuration of printers for both LPR and CUPS -individually (available by advanced mode when adding a printer). Printer -protocol managed are local/usb/samba/ncp/lpd for LPR and -local/usb/serial/samba/lpd/cups_network for CUPS. - - <font color="#000080"><i>Set root password</i></font>: step always displayed for Install only. In -recommended mode display only a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry -to select the root password. In advanced mode, a Use NIS (yellow pages) check -boxes and Use MD5 check box are available. <font color="#000080"><i>Ok</i></font> validate root password and "No -password<font color="#000080"><i> avoid setting a password. </i></font>No password<font color="#000080"><i> is only available in </i></font>Low" -security level or less. The length of the minimal password depend upon security level. - -In corporate firewall : - <font color="#000080"><i>Set admin password</i></font>: step always displayed for Install only. It only - displays a <font color="#000080"><i>Password</i></font> entry and a <font color="#000080"><i>Password (again)</i></font> entry -to select the admin password. -The length of the minimal password depend upon security level. (double of the - security level) - - <font color="#000080"><i>Add a user</i></font>: step always displayed for Install Only. In recommend mode -display <font color="#000080"><i>Real name</i></font>, <font color="#000080"><i>User name</i></font>, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font> and icon -choices as graphical. For customized mode a shell combo is available to choose a -specific shell for the user depending on the package installed. The real name is -the user friendly name of the user whereas user name is its login id name. The -box display user that have already been added below the title. <font color="#000080"><i>Accept user</i></font> -button allow the creation of the user and <font color="#000080"><i>Done</i></font> finish this step. High or -higher security level implies the creation of at least one user. Password length -are subject to same restriction according to security level. In advanced mode, -allow to choose the user in auto login mode. - - <font color="#000080"><i>Create a boot disk</i></font>: step always displayed. In recommended mode this -step is automatically done by doing nothing. If clicked or customized mode, the -user is prompted to allow building a boot disk (default is yes). In advanced -mode allow selection of floppy drive. - - <font color="#000080"><i>Install boot loader</i></font>: step always displayed. In recommended mode this -step is automatically done. In customized mode, a combo <font color="#000080"><i>Boot device</i></font> list the -various boot device that can be used where the bootloader can be installed. The -boot device can the Linux description of the whole disk available (ex: /dev/hda) -or partition available in these disk or floppy drives. Other platform -specificity are not listed here. - LBA check box is displayed in advanced mode (enabled by default) to -allow using LBA addressing if available (PC with LILO). bootloader combo to -select a given bootloader to use, available choice are <font color="#000080"><i>Grub</i></font>, "LILO with text -menu<font color="#000080"><i>, </i></font>LILO with graphical menu<font color="#000080"><i>. default chosen is </i></font>LILO -with graphical menu<font color="#000080"><i>. </i></font>Delay before booting default image" entry -field is available with default value current setting (upgrade) or 5 else. -<font color="#000080"><i>Precise RAM size if needed (found xx MB)</i></font> entry is displayed too, -<font color="#000080"><i>clean /tmp</i></font> check box is disabled by default too. -Boot in graphical mode (init 5) is available here in advanced mode too -(previously in X configuration). <font color="#000080"><i>Video mode</i></font> combo, <font color="#000080"><i>Password</i></font>, <font color="#000080"><i>Password (again)</i></font>, -<font color="#000080"><i>Restrict command line options</i></font> check box is displayed. -Video mode combo list text mode and video mode used for frame buffer, video mode -used for frame buffer are available only if the install managed to boot with -frame buffer activated. Password are restricted according to security level as -other password. Password are mandatory according to security level TO BE DEFINED. - - <font color="#000080"><i>Configure X</i></font>: step always displayed. By default on recommended mode, -everything is done automatically if possible up to test of graphic card, and if -the user accept the settings no more question are asked to him. In customized -mode a dialog is displayed to choose resolution, color depth and which version -of XFree (with 3D optionally) is available for the current card where only a -short description is displayed. <font color="#000080"><i>Ok</i></font> button allow to jump to test phase (for the -first time only) if available. <font color="#000080"><i>Cancel</i></font> return to main XFree configuration -window allowing to change Monitor, Graphic card, Server options or Resolution -with X version to choose. <font color="#000080"><i>Show all</i></font> extend resolution list to more resolutions -according to card (with onboard memory) only and no more monitor capabilities. - The main dialog is a list of command to change some X configuration aspect -according to advanced mode or not : - <font color="#000080"><i>Change Monitor</i></font>: display a tree selection of monitors where default one -is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. - <font color="#000080"><i>Change Graphic card</i></font>: display a tree selection of graphic card where -default one is selected. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> buttons are available. If <font color="#000080"><i>Unlisted</i></font> -is chosen, then a tree of server/driver is displayed containing available server -for XF3 or driver for XF4. <font color="#000080"><i>Cancel</i></font> return to main window and <font color="#000080"><i>Ok</i></font> validates -change. - <font color="#000080"><i>Change Server options</i></font>: available only in advanced mode. display list -of check boxes options for server currently used. <font color="#000080"><i>Ok</i></font> and <font color="#000080"><i>Cancel</i></font> available. - <font color="#000080"><i>Change Resolution</i></font>: change resolution and depth including with X server -version chosen (relative to Xdrakres too). - <font color="#000080"><i>Show Information</i></font>: display an information dialog showing current -configuration internals of X. - <font color="#000080"><i>Test again</i></font>: restart test with current configuration of X. - <font color="#000080"><i>Quit</i></font>: exit X configuration main window. Other question about autologin -and window manager to use are asked on Add user step. - - <font color="#000080"><i>Exit install</i></font>: step displayed only in customized mode but always -executed. Only a text is displayed with a <font color="#000080"><i>Ok</i></font> button. If clicked and some step -have not been executed/completed correctly, a question dialog ask the user if he -really want to quit now, default answer is <font color="#000080"><i>No</i></font>. Advanced switch let user access -to do the previously <font color="#000080"><i>Auto install floppy</i></font> step in DrakX < 8.0. This is just a -question asking the user to generate an auto install floppy automatically. -</pre> -</body> -</html> |