re-sync after the big svn loss

12 files changed, 0 insertions, 2938 deletions

diff --git a/perl-install/Xconfig/FILES b/perl-install/Xconfig/FILES
deleted file mode 100644
index f6352dedf..000000000
--- a/perl-install/Xconfig/FILES
+++ /dev/null
@@ -1,6 +0,0 @@
-       
-parse --- xfree ---- default ------------------ main 
-                \--- card -------------------/  test
-                 \-- monitor ---------------/   various
-                  \- screen ---------------/    proprietary
-                   \ resolution_and_depth-/
diff --git a/perl-install/Xconfig/card.pm b/perl-install/Xconfig/card.pm
deleted file mode 100644
index 686957ddb..000000000
--- a/perl-install/Xconfig/card.pm
+++ /dev/null
@@ -1,635 +0,0 @@
-package Xconfig::card; # $Id$
-
-use diagnostics;
-use strict;
-
-use detect_devices;
-use modules;
-use common;
-use log;
-
-
-my %VideoRams = (
-     256 => N_("256 kB"),
-     512 => N_("512 kB"),
-    1024 => N_("1 MB"),
-    2048 => N_("2 MB"),
-    4096 => N_("4 MB"),
-    8192 => N_("8 MB"),
-   16384 => N_("16 MB"),
-   32768 => N_("32 MB"),
-   65536 => N_("64 MB or more"),
-);
-
-my $lib = arch() =~ /x86_64/ ? "lib64" : "lib";
- 
-my @xfree4_Drivers = ((arch() =~ /^sparc/ ? qw(sunbw2 suncg14 suncg3 suncg6 sunffb sunleo suntcx) :
-		    qw(apm ark chips cirrus cyrix glide i128 i740 i810 imstt 
-                       mga neomagic newport nv rendition r128 radeon vesa
-                       s3 s3virge savage siliconmotion sis tdfx tga trident tseng vmware)), 
-		    qw(ati glint vga fbdev));
-
-sub from_raw_X {
-    my ($raw_X) = @_;
-
-    my $device = $raw_X->get_device or die "no card configured";
-
-    my $card = {
-	use_DRI_GLX  => eval { any { /dri/ } $raw_X->get_modules },
-	%$device,
-    };
-    add_to_card__using_Cards($card, $card->{BoardName});
-    $card;
-}
-
-sub to_raw_X {
-    my ($card, $raw_X) = @_;
-
-    my @cards = ($card, @{$card->{cards} || []});
-
-    foreach (@cards) {
-	#- Specific ATI fglrx driver default options
-	if ($_->{Driver} eq 'fglrx') {
-	    # $default_ATI_fglrx_config need to be move in proprietary ?
-	    $_->{raw_LINES} ||= default_ATI_fglrx_config();
-	}
-	if (arch() =~ /ppc/ && ($_->{Driver} eq 'r128' || $_->{Driver} eq 'radeon')) {
-	    $_->{UseFBDev} = 1;
-	}
-    }
-
-    $raw_X->set_devices(@cards);
-
-    $raw_X->get_ServerLayout->{Xinerama} = { commented => !$card->{Xinerama}, Option => 1 }
-      if defined $card->{Xinerama};
-
-    # cleanup previous special nvidia libglx
-    $raw_X->remove_load_module($_) foreach @{$card->{REMOVE_GLX} || []};
-
-    if ($card->{DRI_GLX_SPECIAL}) {
-        $raw_X->remove_load_module('glx'); # this doesn't duplicate the above glx line
-        # This loads the NVIDIA GLX extension module.
-        # IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE
-        # IT WILL LOAD XFree86 glx module and the server will crash.
-        $raw_X->add_load_module($card->{DRI_GLX_SPECIAL});
-    } else {
-        $raw_X->set_load_module('glx', $card->{Driver} ne 'fbdev'); #- glx for everyone, except proprietary nvidia and fbdev
-        $raw_X->set_load_module('dri', $card->{use_DRI_GLX});
-    }
-
-    $raw_X->remove_Section('DRI');
-
-    $raw_X->remove_load_module('v4l') if $card->{use_DRI_GLX} && $card->{Driver} eq 'r128';
-}
-
-sub default_ATI_fglrx_config() { our $default_ATI_fglrx_config }
-
-sub probe() {
-#-for Pixel tests
-#-    my @c = { driver => 'Card:Matrox Millennium G400 DualHead', description => 'Matrox|Millennium G400 Dual HeadCard' };
-    my @c = detect_devices::matching_driver__regexp('^(Card|Server|Driver):');
-
-    my @cards = map {
-	my @l = $_->{description} =~ /(.*?)\|(.*)/;
-	my $card = { 
-	    description => $_->{description},
-	    VendorName => $l[0], BoardName => $l[1],
-	    BusID => "PCI:$_->{pci_bus}:$_->{pci_device}:$_->{pci_function}",
-	};
-	if    ($_->{driver} =~ /Card:(.*)/)   { $card->{BoardName} = $1; add_to_card__using_Cards($card, $1) }
-	elsif ($_->{driver} =~ /Driver:(.*)/) { $card->{Driver} = $1 }
-	else { internal_error() }
-
-	$card;
-    } @c;
-
-    if (@cards >= 2 && $cards[0]{card_name} eq $cards[1]{card_name} && $cards[0]{card_name} eq 'Intel 830') {
-	shift @cards;
-    }
-    #- take a default on sparc if nothing has been found.
-    if (arch() =~ /^sparc/ && !@cards) {
-        log::l("Using probe with /proc/fb as nothing has been found!");
-	my $s = cat_("/proc/fb");
-	@cards = { server => $s =~ /Mach64/ ? "Mach64" : $s =~ /Permedia2/ ? "3DLabs" : "Sun24" };
-    }
-
-    #- disabling MULTI_HEAD when not available
-    foreach (@cards) { 
-	$_->{MULTI_HEAD} && $_->{card_name} =~ /G[24]00/ or next;
-	if ($ENV{MATROX_HAL}) {
-	    $_->{need_MATROX_HAL} = 1;
-	} else {
-	    delete $_->{MULTI_HEAD};
-	}
-    }
-
-    #- in case of only one cards, remove all BusID reference, this will avoid
-    #- need of change of it if the card is moved.
-    #- on many PPC machines, card is on-board, BusID is important, leave?
-    if (@cards == 1 && !$cards[0]{MULTI_HEAD} && arch() !~ /ppc/) {
-	delete $cards[0]{BusID};
-    }
-
-    @cards;
-}
-
-sub card_config__not_listed {
-    my ($in, $card, $options) = @_;
-
-    my $vendors_regexp = join '|', map { quotemeta } (
-        '3Dlabs',
-        'AOpen', 'ASUS', 'ATI', 'Ark Logic', 'Avance Logic',
-        'Cardex', 'Chaintech', 'Chips & Technologies', 'Cirrus Logic', 'Compaq', 'Creative Labs',
-        'Dell', 'Diamond', 'Digital',
-        'ET', 'Elsa',
-        'Genoa', 'Guillemot', 'Hercules', 'Intel', 'Leadtek',
-        'Matrox', 'Miro', 'NVIDIA', 'NeoMagic', 'Number Nine',
-        'Oak', 'Orchid',
-        'RIVA', 'Rendition Verite',
-        'S3', 'Silicon Motion', 'STB', 'SiS', 'Sun',
-        'Toshiba', 'Trident',
-        'VideoLogic',
-    );
-    my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+");
-
-    my @xf4 = grep { $options->{allowFB} || $::isStandalone || $_ ne 'fbdev' } @xfree4_Drivers;
-    my @list = (
-	(map { 'Vendor|' . $_ } keys %$cards),
-	(map { 'Xorg|' . $_ } @xf4),
-    );
-
-    my $r = exists $cards->{$card->{BoardName}} ? "Vendor|$card->{BoardName}" : 'Xorg|vesa';
-    $in->ask_from_({ title => N("X server"), 
-		     messages => N("Choose an X server"),
-		     interactive_help_id => 'configureX_card_list',
-		   },
-		   [ { val => \$r, separator => '|', list => \@list, sort => 1,
-		       format => sub { $_[0] =~ /^Vendor\|($vendors_regexp)\s*-?(.*)/ ? "Vendor|$1|$2" : 
-				       $_[0] =~ /^Vendor\|(.*)/ ? "Vendor|Other|$1" : $_[0] } } ]) or return;
-
-    log::explanations("Xconfig::card: $r manually chosen");
-
-    $r eq "Vendor|$card->{BoardName}" and return 1; #- it is unchanged, do not modify $card
-
-    my ($kind, $s) = $r =~ /(.*?)\|(.*)/;
-
-    %$card = ();
-    if ($kind eq 'Vendor') {
-	add_to_card__using_Cards($card, $s);
-    } else {
-	$card->{Driver} = $s;
-    }
-    $card->{manually_chosen} = 1;
-    1;
-}
-
-sub multi_head_choose {
-    my ($in, $auto, @cards) = @_;
-
-    my @choices = multi_head_choices('', @cards);
-
-    my $tc = $choices[0];
-    if ($auto) {
-	@choices == 1 or return;
-    } else {
-	$tc = $in->ask_from_listf(N("Multi-head configuration"),
-				  N("Your system supports multiple head configuration.
-What do you want to do?"), sub { $_[0]{text} }, \@choices) or return;
-    }
-    $tc->{code} or die internal_error();
-    return $tc->{code}();
-}
-
-sub configure_auto_install {
-    my ($raw_X, $do_pkgs, $old_X, $options) = @_;
-
-    my $card = $old_X->{card} || {};
-
-    if ($card->{card_name}) {
-	#- try to get info from given card_name
-	add_to_card__using_Cards($card, $card->{card_name});
-	if (!$card->{Driver}) {
-	    log::l("bad card_name $card->{card_name}, using probe");
-	    undef $card->{card_name};
-	}
-    }
-
-    if (!$card->{Driver}) {
-	my @cards = probe();
-	my ($choice) = multi_head_choices($old_X->{Xinerama}, @cards);
-	$card = $choice ? $choice->{code}() : do {
-	    log::explanations('no graphic card probed, try providing one using $o->{card}{Driver} or $o->{card}{card_name}. Defaulting...');
-	    { Driver => $options->{allowFB} ? 'fbdev' : 'vesa' };
-	};
-    }
-
-    my ($glx_choice) = xfree_and_glx_choices($card);
-    log::explanations("Using $glx_choice->{text}");
-    $glx_choice->{code}();
-    set_glx_restrictions($card);
-
-    install_server($card, $options, $do_pkgs);
-    if ($card->{needVideoRam} && !$card->{VideoRam}) {
-	$card->{VideoRam} = $options->{VideoRam_probed} || 4096;
-	log::explanations("argh, I need to know VideoRam! Taking " . ($options->{probed_VideoRam} ? "the probed" : "a default") . " value: VideoRam = $card->{VideoRam}");
-    }
-    to_raw_X($card, $raw_X);
-    $card;
-}
-
-sub configure {
-    my ($in, $raw_X, $do_pkgs, $auto, $options) = @_;
-
-    my @cards = probe();
-    @cards or @cards = {};
-
-    if (!$cards[0]{Driver}) {
-	if ($options->{allowFB}) {
-	    $cards[0]{Driver} = 'fbdev';
-	} elsif ($auto) {
-	    log::explanations("Xconfig::card: auto failed (unknown card and no allowFB)");
-	    return 0;
-	}
-    }
-    if (!$auto) {
-      card_config__not_listed:
-	card_config__not_listed($in, $cards[0], $options) or return;
-    }
-
-    my $card = multi_head_choose($in, $auto, @cards) or return;
-
-    xfree_and_glx_choose($in, $card, $auto) or return;
-
-    eval { install_server($card, $options, $do_pkgs) };
-    if ($@) {
-	$in->ask_warn('', N("Can not install Xorg package: %s", $@));
-	goto card_config__not_listed;
-    }
-    
-    if ($card->{needVideoRam} && !$card->{VideoRam}) {
-	if ($auto) {
-	    log::explanations("Xconfig::card: auto failed (needVideoRam)");
-	    return;
-	}
-	$card->{VideoRam} = (find { $_ <= $options->{VideoRam_probed} } reverse ikeys %VideoRams) || 4096;
-	$in->ask_from('', N("Select the memory size of your graphics card"),
-		      [ { val => \$card->{VideoRam},
-			  type => 'list',
-			  list => [ ikeys %VideoRams ],
-			  format => sub { translate($VideoRams{$_[0]}) },
-			  not_edit => !$::expert } ]) or return;
-    }
-
-    to_raw_X($card, $raw_X);
-    $card;
-}
-
-sub install_server {
-    my ($card, $options, $do_pkgs) = @_;
-
-    my $prog = "$::prefix/usr/X11R6/bin/Xorg";
-
-    my @packages;
-    push @packages, 'xorg-x11-server' if ! -x $prog;
-
-    #- additional packages to install according available card.
-    #- add XFree86-libs-DRI here if using DRI (future split of XFree86 TODO)
-    if ($card->{use_DRI_GLX}) {
-	push @packages, 'Glide_V5' if $card->{card_name} eq 'Voodoo5 (generic)';
-	push @packages, 'Glide_V3-DRI' if member($card->{card_name}, 'Voodoo3 (generic)', 'Voodoo Banshee (generic)');
-	push @packages, 'xorg-x11-glide-module' if $card->{card_name} =~ /Voodoo/;
-    }
-
-    if ($options->{freedriver}) {
-	delete $card->{Driver2};
-    }
-
-    my %nvidia_packages = (
-                            #- using NVIDIA Legacy driver for old NVIDIA cards (TNT, TNT2, Vanta, Quadro, Quadro2, GeForce and GeForce2):
-                            legacy => [ qw(nvidia_legacy-kernel nvidia_legacy) ],
-                            #- using current NVIDIA driver for recent NVIDIA cards (Geforce/Quadro 3/4/FX/6x00/NVS):
-                            new => [ qw(nvidia-kernel nvidia) ],
-                           );
-
-    my %proprietary_Driver2 = (
-	nvidia => $nvidia_packages{ $card->{NVIDIA_LEGACY} ? 'legacy' : 'new' },
-	fglrx => [ 'ati-kernel', 'ati' ], #- using ATI fglrx driver (Radeon, Fire GL cards only).
-    );
-    if (my $rpms_needed = $proprietary_Driver2{$card->{Driver2}}) {
-	if (my $proprietary_packages = $do_pkgs->check_kernel_module_packages($rpms_needed->[0], $rpms_needed->[1])) {
-	    push @packages, @$proprietary_packages;
-	    # prevent having both nvidia & nvidia_legacy driver installed due to incompatibility:
-	    if ($card->{Driver2} eq 'nvidia') {
-	       $do_pkgs->remove($_) foreach @{$do_pkgs->check_kernel_module_packages(@{$nvidia_packages{ $card->{NVIDIA_LEGACY} ? 'new' : 'legacy' }})};
-	    }
-	}
-    }
-
-    $do_pkgs->install(@packages) if @packages;
-    -x $prog or die "server not available (should be in $prog)";
-
-    my $modules_dir = "/usr/X11R6/$lib/modules";
-    my $new_nvidia_libglx = "$modules_dir/extensions/nvidia/libglx.so";
-    my $old_nvidia_libglx = "$modules_dir/extensions/libglx.so";
-    #- make sure everything is correct at this point, packages have really been installed
-    #- and driver and GLX extension is present.
-    if ($card->{Driver2} eq 'nvidia' &&
-	(-e "$::prefix$modules_dir/drivers/nvidia_drv.o" || -e "$::prefix$modules_dir/drivers/nvidia_drv.so")) {
-	#- when there is extensions/libglx.a, it means extensions/libglx.so is not xorg's libglx, so it may be nvidia's
-	#- new nvidia packages have libglx.so in extensions/nvidia instead of simply extensions/
-	my $libglx_a = -e "$::prefix$modules_dir/extensions/libglx.a";
-	my $libglx = find { -l "$::prefix$_" } $new_nvidia_libglx, if_($libglx_a, $old_nvidia_libglx);
-	if ($libglx) {
-	    log::explanations("Using specific NVIDIA driver and GLX extensions");
-	    $card->{Driver} = 'nvidia';
-	    $card->{DRI_GLX_SPECIAL} = $libglx;
-	}
-    }
-    if ($card->{Driver2} eq 'fglrx' &&
-	-e "$::prefix$modules_dir/dri/fglrx_dri.so" &&
-	(-e "$::prefix$modules_dir/drivers/fglrx_drv.o" || -e "$::prefix$modules_dir/drivers/fglrx_drv.so")) {
-	log::explanations("Using specific ATI fglrx and DRI drivers");
-	$card->{Driver} = 'fglrx';
-    }
-    $card->{REMOVE_GLX} = [ $old_nvidia_libglx, $new_nvidia_libglx ];
-
-    libgl_config($card);
-
-    if ($card->{need_MATROX_HAL}) {
-	require Xconfig::proprietary;
-	Xconfig::proprietary::install_matrox_hal($::prefix);
-    }
-}
-
-sub xfree_and_glx_choose {
-    my ($in, $card, $auto) = @_;
-
-    my @choices = xfree_and_glx_choices($card);
-
-    my $tc = 
-      $auto ? $choices[0] :
-	$in->ask_from_listf_raw({ title => N("Xorg configuration"), 
-				  messages => formatAlaTeX(join("\n\n\n", (grep { $_ } map { $_->{more_messages} } @choices),
-								N("Which configuration of Xorg do you want to have?"))), 
-				  interactive_help_id => 'configureX_xfree_and_glx',
-				},
-				sub { $_[0]{text} }, \@choices) or return;
-    log::explanations("Using $tc->{text}");
-    $tc->{code}();
-    set_glx_restrictions($card);
-    1;
-}
-
-sub multi_head_choices {
-    my ($want_Xinerama, @cards) = @_;
-    my @choices;
-
-    my $has_multi_head = @cards > 1 || @cards && $cards[0]{MULTI_HEAD} > 1;
-    my $disable_multi_head = any { 
-	$_->{Driver} or log::explanations("found card $_->{description} not supported by XF4, disabling multi-head support");
-	!$_->{Driver};
-    } @cards;
-
-    if ($has_multi_head && !$disable_multi_head) {
-	my $configure_multi_head = sub {
-
-	    #- special case for multi head card using only one BusID.
-	    @cards = map {
-		map_index { { Screen => $::i, %$_ } } ($_) x ($_->{MULTI_HEAD} || 1);
-	    } @cards;
-
-	    my $card = shift @cards; #- assume good default.
-	    $card->{cards} = \@cards;
-	    $card->{Xinerama} = $_[0];
-	    $card;
-	};
-	my $independent = { text => N("Configure all heads independently"), code => sub { $configure_multi_head->('') } };
-	my $xinerama    = { text => N("Use Xinerama extension"),            code => sub { $configure_multi_head->(1) } };
-	push @choices, $want_Xinerama ? ($xinerama, $independent) : ($independent, $xinerama);
-    }
-
-    foreach my $c (@cards) {
-	push @choices, { text => N("Configure only card \"%s\"%s", $c->{description}, $c->{BusID} && " ($c->{BusID})"),
-			 code => sub { $c } };
-    }
-    @choices;
-}
-
-#- Xorg version available, it would be better to parse available package and get version from it.
-sub xorg_version() { '6.9' }
-
-sub xfree_and_glx_choices {
-    my ($card) = @_;
-
-    my @choices = if_($card->{Driver}, { text => N("Xorg %s", xorg_version()), code => sub {} });
-
-    #- no GLX with Xinerama
-    return @choices if $card->{Xinerama};
-
-    #- ask the expert or any user on second pass user to enable or not hardware acceleration support.
-    if ($card->{DRI_GLX}) {
-	unshift @choices, { text => N("Xorg %s with 3D hardware acceleration", xorg_version()),
-			    code => sub { $card->{use_DRI_GLX} = 1 },
-			    more_messages => N("Your card can have 3D hardware acceleration support with Xorg %s.", xorg_version()),
-			  };
-    }
-
-    #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration.
-    if ($card->{DRI_GLX_EXPERIMENTAL} && $::expert) {
-	push @choices, { text => N("Xorg %s with EXPERIMENTAL 3D hardware acceleration", xorg_version()),
-			 code => sub { $card->{use_DRI_GLX} = 1 },
-			 more_messages => N("Your card can have 3D hardware acceleration support with Xorg %s,
-NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", xorg_version()),
-		       };
-    }
-    @choices;
-}
-
-sub set_glx_restrictions {
-    my ($card) = @_;
-
-    #- 3D acceleration configuration for XFree 4 using DRI, this is enabled by default
-    #- but for some there is a need to specify VideoRam (else it will not run).
-    if ($card->{use_DRI_GLX}) {
-	$card->{needVideoRam} = 1 if $card->{description} =~ /Matrox.* G[245][05]0/;
-	($card->{needVideoRam}, $card->{VideoRam}) = (1, 16384)
-	  if member($card->{card_name}, 'Intel 810', 'Intel 815');
-
-	#- hack for ATI Rage 128 card using a bttv or peripheral with PCI bus mastering exchange
-	#- AND using DRI at the same time.
-	if (member($card->{card_name}, 'ATI Rage 128', 'ATI Rage 128 TVout', 'ATI Rage 128 Mobility')) {
-	    $card->{Options}{UseCCEFor2D} = bool2text(modules::probe_category('multimedia/tv'));
-	}
-    }
-
-    #- check for Matrox G200 PCI cards, disable AGP in such cases, causes black screen else.
-    if (member($card->{card_name}, 'Matrox Millennium 200', 'Matrox Millennium 200', 'Matrox Mystique') && $card->{description} !~ /AGP/) {
-	log::explanations("disabling AGP mode for Matrox card, as it seems to be a PCI card");
-	log::explanations("this is only used for XFree 3.3.6, see /etc/X11/glx.conf");
-	substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$::prefix/etc/X11/glx.conf";
-    }
-}
-
-sub libgl_config {
-    my ($card) = @_;
-
-    my $dir = "$::prefix/etc/ld.so.conf.d";
-    my $comment = '# commented-by-DrakX ';
-
-    my %driver_to_libgl_config = (
-	nvidia => $card->{NVIDIA_LEGACY} ? 'nvidia_legacy.conf' : 'nvidia.conf',
-	nvidia_other => !$card->{NVIDIA_LEGACY} ? 'nvidia_legacy.conf' : 'nvidia.conf',
-	fglrx => 'ati.conf',
-    );
-    my $need_to_run_ldconfig;
-    my $wanted = $driver_to_libgl_config{$card->{Driver}};
-    foreach my $file (values %driver_to_libgl_config) {
-	substInFile {
-	    my ($commented, $s) = /^(\Q$comment\E)?(.*)/;
-	    if ($file eq $wanted) {
-		$_ = "$s\n";
-		$need_to_run_ldconfig ||= $commented;
-	    } else {
-		$_ = "$comment$s\n";
-		$need_to_run_ldconfig ||= !$commented;
-	    }	    
-	} "$dir/$file" if -e "$dir/$file";
-    }
-    if ($::isStandalone && $need_to_run_ldconfig) {
-	log::explanations("ldconfig will be run because the GL library was " . ($wanted ? 'enabled' : 'disabled'));
-	system("/sbin/ldconfig");
-    }
-}
-
-sub add_to_card__using_Cards {
-    my ($card, $name) = @_;
-    my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+");
-    add2hash($card, $cards->{$name});
-    $card->{BoardName} = $card->{card_name};
-
-    $card;
-}
-
-#- needed for bad cards not restoring cleanly framebuffer, according to which version of Xorg are used.
-sub check_bad_card {
-    my ($card) = @_;
-    my $bad_card = $card->{BAD_FB_RESTORE};
-    $bad_card ||= $card->{Driver} eq 'i810' || $card->{Driver} eq 'fbdev';
-    $bad_card ||= member($card->{Driver}, 'nvidia', 'vmware') if !$::isStandalone; #- avoid testing during install at any price.
-
-    log::explanations("the graphics card does not like X in framebuffer") if $bad_card;
-
-    !$bad_card;
-}
-
-sub readCardsDB {
-    my ($file) = @_;
-    my ($card, %cards);
-
-    my $F = openFileMaybeCompressed($file);
-
-    my $lineno = 0;
-    my ($cmd, $val);
-    my $fs = {
-	NAME => sub {
-	    $cards{$card->{card_name}} = $card if $card;
-	    $card = { card_name => $val };
-	},
-	SEE => sub {
-	    my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno";
-	    add2hash($card, $c);
-	},
-        LINE => sub { $val =~ s/^\s*//; $card->{raw_LINES} .= "$val\n" },
-	CHIPSET => sub { $card->{Chipset} = $val },
-	DRIVER => sub { $card->{Driver} = $val },
-	DRIVER2 => sub { $card->{Driver2} = $val },
-	NEEDVIDEORAM => sub { $card->{needVideoRam} = 1 },
-	DRI_GLX => sub { $card->{DRI_GLX} = 1 if $card->{Driver} },
-	DRI_GLX_EXPERIMENTAL => sub { $card->{DRI_GLX_EXPERIMENTAL} = 1 if $card->{Driver} },
-	MULTI_HEAD => sub { $card->{MULTI_HEAD} = $val if $card->{Driver} },
-	BAD_FB_RESTORE => sub { $card->{BAD_FB_RESTORE} = 1 },
-	FB_TVOUT => sub { $card->{FB_TVOUT} = 1 },
-	UNSUPPORTED => sub { delete $card->{Driver} },
-	NVIDIA_LEGACY => sub { $card->{NVIDIA_LEGACY} = 1 },
-
-	COMMENT => sub {},
-    };
-
-    local $_;
-    while (<$F>) { $lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-	/^END/ and do { $cards{$card->{card_name}} = $card if $card; last };
-
-	($cmd, $val) = /(\S+)\s*(.*)/ or next;
-
-	my $f = $fs->{$cmd};
-
-	$f ? $f->() : log::l("unknown line $lineno ($_)");
-    }
-    \%cards;
-}
-
-our $default_ATI_fglrx_config = <<'END';
-# === disable PnP Monitor  ===
-#Option                              "NoDDC"
-# === disable/enable XAA/DRI ===
-Option "no_accel"                   "no"
-Option "no_dri"                     "no"
-# === FireGL DDX driver module specific settings ===
-# === Screen Management ===
-Option "DesktopSetup"               "0x00000000" 
-Option "MonitorLayout"              "AUTO, AUTO"
-Option "IgnoreEDID"                 "off"
-Option "HSync2"                     "unspecified" 
-Option "VRefresh2"                  "unspecified" 
-Option "ScreenOverlap"              "0" 
-# === TV-out Management ===
-Option "NoTV"                       "yes"     
-Option "TVStandard"                 "NTSC-M"     
-Option "TVHSizeAdj"                 "0"     
-Option "TVVSizeAdj"                 "0"     
-Option "TVHPosAdj"                  "0"     
-Option "TVVPosAdj"                  "0"     
-Option "TVHStartAdj"                "0"     
-Option "TVColorAdj"                 "0"     
-Option "GammaCorrectionI"           "0x00000000"
-Option "GammaCorrectionII"          "0x00000000"
-# === OpenGL specific profiles/settings ===
-Option "Capabilities"               "0x00000000"
-# === Video Overlay for the Xv extension ===
-Option "VideoOverlay"               "on"
-# === OpenGL Overlay ===
-# Note: When OpenGL Overlay is enabled, Video Overlay
-#       will be disabled automatically
-Option "OpenGLOverlay"              "off"
-Option "CenterMode"                 "off"
-# === QBS Support ===
-Option "Stereo"                     "off"
-Option "StereoSyncEnable"           "1"
-# === Misc Options ===
-Option "UseFastTLS"                 "0"
-Option "BlockSignalsOnLock"         "on"
-Option "UseInternalAGPGART"         "no"
-Option "ForceGenericCPU"            "no"
-# === FSAA ===
-Option "FSAAScale"                  "1"
-Option "FSAADisableGamma"           "no"
-Option "FSAACustomizeMSPos"         "no"
-Option "FSAAMSPosX0"                "0.000000"
-Option "FSAAMSPosY0"                "0.000000"
-Option "FSAAMSPosX1"                "0.000000"
-Option "FSAAMSPosY1"                "0.000000"
-Option "FSAAMSPosX2"                "0.000000"
-Option "FSAAMSPosY2"                "0.000000"
-Option "FSAAMSPosX3"                "0.000000"
-Option "FSAAMSPosY3"                "0.000000"
-Option "FSAAMSPosX4"                "0.000000"
-Option "FSAAMSPosY4"                "0.000000"
-Option "FSAAMSPosX5"                "0.000000"
-Option "FSAAMSPosY5"                "0.000000"
-END
-
-1;
-
diff --git a/perl-install/Xconfig/default.pm b/perl-install/Xconfig/default.pm
deleted file mode 100644
index d2fb0f783..000000000
--- a/perl-install/Xconfig/default.pm
+++ /dev/null
@@ -1,45 +0,0 @@
-package Xconfig::default; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::xfree;
-use keyboard;
-use common;
-use mouse;
-use modules::any_conf;
-
-
-sub configure {
-    my ($do_pkgs, $o_keyboard, $o_mouse) = @_;
-
-    my $keyboard = $o_keyboard || keyboard::read_or_default();
-    my $mouse = $o_mouse || do {
-	my $mouse = mouse::read(); 
-	add2hash($mouse, mouse::detect(modules::any_conf->read)) if !$::noauto;
-	$mouse;
-    };
-
-    my $raw_X = Xconfig::xfree->empty_config;
-
-    $raw_X->add_load_module($_) foreach qw(dbe v4l extmod type1 freetype);
-
-    config_keyboard($raw_X, $keyboard);
-    config_mouse($raw_X, $do_pkgs, $mouse);
-
-    $raw_X;
-}
-
-sub config_mouse {
-    my ($raw_X, $do_pkgs, $mouse) = @_;
-    mouse::set_xfree_conf($mouse, $raw_X);
-    mouse::various_xfree_conf($do_pkgs, $mouse);
-}
-
-sub config_keyboard {
-    my ($raw_X, $keyboard) = @_;
-    $raw_X->set_keyboard(keyboard::keyboard2full_xkb($keyboard));
-}
-
-1;
-
diff --git a/perl-install/Xconfig/main.pm b/perl-install/Xconfig/main.pm
deleted file mode 100644
index bdb4cbfa5..000000000
--- a/perl-install/Xconfig/main.pm
+++ /dev/null
@@ -1,262 +0,0 @@
-package Xconfig::main; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::monitor;
-use Xconfig::card;
-use Xconfig::resolution_and_depth;
-use Xconfig::various;
-use Xconfig::screen;
-use Xconfig::test;
-use Xconfig::xfree;
-use common;
-
-
-sub configure_monitor {
-    my ($in) = @_;
-
-    my ($raw_X, $before) = Xconfig::xfree->read_and_prepare_write;
-    Xconfig::monitor::configure($in, $raw_X, int($raw_X->get_devices)) or return;
-    if ($raw_X->prepare_write ne $before) {
-	$raw_X->write;
-	'need_restart';
-    } else {
-	'';
-    }
-}
-
-sub configure_resolution {
-    my ($in) = @_;
-
-    my ($raw_X, $before) = Xconfig::xfree->read_and_prepare_write;
-    my $X = { 
-	card => Xconfig::card::from_raw_X($raw_X),
-	monitors => [ $raw_X->get_monitors ],
-    };
-    $X->{resolution} = Xconfig::resolution_and_depth::configure($in, $raw_X, $X->{card}, $X->{monitors}) or return;
-    if ($raw_X->prepare_write ne $before) {
-	&write($raw_X, $X);
-    } else {
-	'';
-    }
-}
-
-
-sub configure_everything_auto_install {
-    my ($raw_X, $do_pkgs, $old_X, $options) = @_;
-    my $X = {};
-    $X->{monitors} = Xconfig::monitor::configure_auto_install($raw_X, $old_X) or return;
-    $options->{VideoRam_probed} = $X->{monitors}[0]{VideoRam_probed};
-    $X->{card} = Xconfig::card::configure_auto_install($raw_X, $do_pkgs, $old_X, $options) or return;
-    Xconfig::screen::configure($raw_X) or return;
-    $X->{resolution} = Xconfig::resolution_and_depth::configure_auto_install($raw_X, $X->{card}, $X->{monitors}, $old_X);
-
-    my $action = &write($raw_X, $X);
-
-    Xconfig::various::runlevel(exists $old_X->{xdm} && !$old_X->{xdm} ? 3 : 5);
-
-    $action;
-}
-
-sub configure_everything {
-    my ($in, $raw_X, $do_pkgs, $auto, $options) = @_;
-    my $X = {};
-    my $ok = 1;
-
-    my $probed_info = Xconfig::monitor::probe($raw_X->get_Driver);
-    $options->{VideoRam_probed} = $probed_info->{VideoRam_probed};
-    $ok &&= $X->{card} = Xconfig::card::configure($in, $raw_X, $do_pkgs, $auto, $options);
-    $ok &&= $X->{monitors} = Xconfig::monitor::configure($in, $raw_X, int($raw_X->get_devices), $probed_info, $auto);
-    $ok &&= Xconfig::screen::configure($raw_X);
-    $ok &&= $X->{resolution} = Xconfig::resolution_and_depth::configure($in, $raw_X, $X->{card}, $X->{monitors}, $auto);
-    $ok &&= Xconfig::test::test($in, $raw_X, $X->{card}, '', 'skip_badcard') if !$auto;
-
-    if (!$ok) {
-	return if $auto;
-	($ok) = configure_chooser_raw($in, $raw_X, $do_pkgs, $options, $X, 1);
-    }
-    $X->{various} ||= Xconfig::various::various($in, $X->{card}, $options, $auto);
-
-    may_write($in, $raw_X, $X, $ok);
-}
-
-sub configure_chooser_raw {
-    my ($in, $raw_X, $do_pkgs, $options, $X, $b_modified) = @_;
-
-    my %texts;
-
-    my $update_texts = sub {
-	$texts{card} = $X->{card} && $X->{card}{BoardName} || N("Custom");
-	$texts{monitors} = $X->{monitors} && $X->{monitors}[0]{ModelName} || N("Custom");
-	$texts{resolution} = Xconfig::resolution_and_depth::to_string($X->{resolution});
-
-	$texts{$_} =~ s/(.{20}).*/$1.../ foreach keys %texts; #- ensure not too long
-    };
-    $update_texts->();
-
-    my $may_set; 
-    my $prompt_for_resolution = sub {
-	$may_set->('resolution', Xconfig::resolution_and_depth::configure($in, $raw_X, $X->{card}, $X->{monitors}));
-    };
-    $may_set = sub {
-	my ($field, $val) = @_;
-	if ($val) {
-	    $X->{$field} = $val;
-	    $X->{"modified_$field"} = 1;
-	    $b_modified = 1;
-	    $update_texts->();
-
-	    if (member($field, 'card', 'monitors')) {
-		my ($default_resolution) = Xconfig::resolution_and_depth::choices($raw_X, $X->{resolution}, $X->{card}, $X->{monitors});
-		if (find { $default_resolution->{$_} ne $X->{resolution}{$_} } 'X', 'Y', 'Depth') {
-		    $prompt_for_resolution->();
-		} else {
-		    if ($default_resolution->{bios} && !$X->{resolution}{bios}) {
-			$may_set->('resolution', $default_resolution);
-		    }
-		    Xconfig::screen::configure($raw_X);
-		    $raw_X->set_resolution($X->{resolution}) if $X->{resolution};
-		}
-	    }
-	}
-    };
-
-    my $ok;
-    $in->ask_from_({ interactive_help_id => 'configureX_chooser',
-		     if_($::isStandalone, ok => N("Quit")) }, 
-		   [
-		    { label => N("Graphic Card"), val => \$texts{card}, clicked => sub { 
-			  $may_set->('card', Xconfig::card::configure($in, $raw_X, $do_pkgs, 0, $options));
-		      } },
-		    { label => N("Monitor"), val => \$texts{monitors}, clicked => sub { 
-			  $may_set->('monitors', Xconfig::monitor::configure($in, $raw_X, int($raw_X->get_devices)));
-		      } },
-		    { label => N("Resolution"), val => \$texts{resolution}, disabled => sub { !$X->{card} || !$X->{monitors} },
-		      clicked => $prompt_for_resolution },
-		        if_(Xconfig::card::check_bad_card($X->{card}) || $::isStandalone,
-		     { val => N("Test"), disabled => sub { !$X->{card} || !$X->{monitors} },
-		       clicked => sub { 
-			  $ok = Xconfig::test::test($in, $raw_X, $X->{card}, 'auto', 0);
-		      } },
-			),
-		    { val => N("Options"), clicked => sub {
-			  Xconfig::various::various($in, $X->{card}, $options);
-			  $X->{various} = 'done';
-		      } },
-		   ]);
-    $ok, $b_modified;
-}
-
-sub configure_chooser {
-    my ($in, $raw_X, $do_pkgs, $options) = @_;
-
-    my $X = {
-	card => scalar eval { Xconfig::card::from_raw_X($raw_X) },
-	monitors => [ $raw_X->get_monitors ],
-	resolution => scalar eval { $raw_X->get_resolution },
-    };
-    my $before = $raw_X->prepare_write;
-    my ($ok) = configure_chooser_raw($in, $raw_X, $do_pkgs, $options, $X);
-
-    if ($raw_X->prepare_write ne $before) {
-	may_write($in, $raw_X, $X, $ok);
-    } else {
-	'';
-    }
-}
-
-sub configure_everything_or_configure_chooser {
-    my ($in, $options, $auto, $o_keyboard, $o_mouse) = @_;
-
-    my $raw_X = eval { Xconfig::xfree->read };
-    my $err = $@ && formatError($@);
-    $err ||= check_valid($raw_X) if $raw_X && @$raw_X; #- that's ok if config is empty
-    if ($err) {
-	log::l("ERROR: bad X config file (error: $err)");
-	$options->{ignore_bad_conf} or $in->ask_okcancel('',
-			  N("Your Xorg configuration file is broken, we will ignore it.")) or return;
-	$raw_X = [];
-    }
-
-    my $rc = 'ok';
-    if (is_empty_array_ref($raw_X)) {
-	$raw_X = Xconfig::default::configure($in->do_pkgs, $o_keyboard, $o_mouse);
-	$rc = configure_everything($in, $raw_X, $in->do_pkgs, $auto, $options);
-    } elsif (!$auto) {
-	$rc = configure_chooser($in, $raw_X, $in->do_pkgs, $options);
-    }
-    $rc && $raw_X, $rc;
-}
-
-
-sub may_write {
-    my ($in, $raw_X, $X, $ok) = @_;
-
-    $ok ||= $in->ask_yesorno('', N("Keep the changes?
-The current configuration is:
-
-%s", Xconfig::various::info($raw_X, $X->{card})), 1);
-
-    $ok && &write($raw_X, $X);
-}
-
-sub write {
-    my ($raw_X, $X) = @_;
-    export_to_install_X($X) if $::isInstall;
-    $raw_X->write;
-    Xconfig::various::check_XF86Config_symlink();
-    symlinkf "../../usr/X11R6/bin/Xorg", "$::prefix/etc/X11/X";
-    if ($X->{resolution}{bios}) {
-	Xconfig::various::setupFB($X->{resolution}{bios});
-	'need_reboot';
-    } else {
-	'need_restart';
-    }
-}
-
-
-sub export_to_install_X {
-    my ($X) = @_;
-
-    $::o->{X}{resolution_wanted} = $X->{resolution}{X};
-    $::o->{X}{default_depth} = $X->{resolution}{Depth};
-    $::o->{X}{bios_vga_mode} = $X->{resolution}{bios};
-    $::o->{X}{monitors} = $X->{monitors} if $X->{monitors}[0]{manually_chosen} && $X->{monitors}[0]{vendor} ne "Plug'n Play";
-    $::o->{X}{card} = $X->{card} if $X->{card}{manually_chosen};
-    $::o->{X}{Xinerama} = 1 if $X->{card}{Xinerama};
-}
-
-sub check_valid {
-    my ($raw_X) = @_;
-
-    my %sections = map { 
-	my @l = $raw_X->get_Sections($_) or return "missing section $_";
-	$_ => \@l;
-    } qw(Files InputDevice Monitor Device Screen ServerLayout);
-
-    $sections{Files}[0]{FontPath} or return "missing FontPath";
-
-    '';
-}
-
-#- most usefull XFree86-4.0.1 server options. Default values is the first ones.
-our @options_serverflags = (
-			'DontZap'                 => [ "Off", "On" ],
-			'DontZoom'                => [ "Off", "On" ],
-			'DisableVidModeExtension' => [ "Off", "On" ],
-			'AllowNonLocalXvidtune'   => [ "Off", "On" ],
-			'DisableModInDev'         => [ "Off", "On" ],
-			'AllowNonLocalModInDev'   => [ "Off", "On" ],
-			'AllowMouseOpenFail'      => [ "False", "True" ],
-			'VTSysReq'                => [ "Off", "On" ],
-			'BlankTime'               => [ "10", "5", "3", "15", "30" ],
-			'StandByTime'             => [ "20", "10", "6", "30", "60" ],
-			'SuspendTime'             => [ "30", "15", "9", "45", "90" ],
-			'OffTime'                 => [ "40", "20", "12", "60", "120" ],
-			'Pixmap'                  => [ "32", "24" ],
-			'PC98'                    => [ "auto-detected", "False", "True" ],
-			'NoPM'                    => [ "False", "True" ],
-);
-
-1;
diff --git a/perl-install/Xconfig/monitor.pm b/perl-install/Xconfig/monitor.pm
deleted file mode 100644
index ba5360b69..000000000
--- a/perl-install/Xconfig/monitor.pm
+++ /dev/null
@@ -1,275 +0,0 @@
-package Xconfig::monitor; #- $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::xfree;
-use detect_devices;
-use common;
-use any;
-use log;
-
-
-sub good_default_monitor() {
-  detect_devices::is_xbox() ? 'Generic|640x480 @ 60 Hz' :
-    arch() =~ /ppc/ ? 
-      (detect_devices::get_mac_model() =~ /^iBook/ ? 'Apple|iBook 800x600' : 'Apple|iMac/PowerBook 1024x768') :
-      (detect_devices::isLaptop() ? 'Generic|Flat Panel 1024x768' : 'Generic|1024x768 @ 60 Hz');
-}
-
-my @VertRefresh_ranges = ("50-70", "50-90", "50-100", "40-150");
-
-my @HorizSync_ranges = (
-	"31.5",
-	"31.5-35.1",
-	"31.5-37.9",
-	"31.5-48.5",
-	"31.5-57.0",
-	"31.5-64.3",
-	"31.5-79.0",
-	"31.5-82.0",
-	"31.5-88.0",
-	"31.5-94.0",
-);
-
-sub configure {
-    my ($in, $raw_X, $nb_monitors, $o_probed_info, $b_auto) = @_;
-
-    my $monitors = [ $raw_X->get_or_new_monitors($nb_monitors) ];
-    if ($o_probed_info) {
-	put_in_hash($monitors->[0], $o_probed_info);
-    }
-    my $head_nb = 1;
-    foreach my $monitor (@$monitors) {
-	choose($in, $monitor, @$monitors > 1 ? $head_nb++ : 0, $raw_X->get_Driver, $b_auto) or return;
-    }
-    $raw_X->set_monitors(@$monitors);
-    $monitors;
-}
-
-sub configure_auto_install {
-    my ($raw_X, $old_X) = @_;
-
-    if ($old_X->{monitor}) {
-	#- keep compatibility
-	$old_X->{monitor}{VertRefresh} = $old_X->{monitor}{vsyncrange};
-	$old_X->{monitor}{HorizSync} = $old_X->{monitor}{hsyncrange};
-
-	#- new name
-	$old_X->{monitors} = [ delete $old_X->{monitor} ];
-    }
-
-    my $monitors = [ $raw_X->get_or_new_monitors($old_X->{monitors} ? int @{$old_X->{monitors}} : 1) ];
-    mapn {
-	my ($monitor, $auto_install_monitor) = @_;
-	put_in_hash($monitor, $auto_install_monitor);
-	configure_automatic($monitor);
-    } $monitors, $old_X->{monitors} if $old_X->{monitors};
-
-    if (!is_valid($monitors->[0])) {
-	put_in_hash($monitors->[0], probe($old_X->{card}{Driver}));
-    }
-
-    foreach my $monitor (@$monitors) {
-	if (!is_valid($monitor)) {
-	    good_default_monitor() =~ /(.*)\|(.*)/ or internal_error("bad good_default_monitor");
-	    put_in_hash($monitor, { VendorName => $1, ModelName => $2 });
-	    configure_automatic($monitor) or internal_error("good_default_monitor (" . good_default_monitor()  . ") is unknown in MonitorsDB");
-	}
-    }
-    $raw_X->set_monitors(@$monitors);
-    $monitors;
-}
-
-sub choose {
-    my ($in, $monitor, $head_nb, $card_Driver, $b_auto) = @_;
-
-    my $ok = is_valid($monitor);
-    if ($b_auto) {
-	log::l("Xconfig::monitor: auto failed") if !$ok;
-	return $ok;
-    }
-
-    my %h_monitors = map { ("$_->{VendorName}|$_->{ModelName}" => $_) } monitors_db();
-
-  ask_monitor:
-    my $merged_name = do {
-	if ($monitor->{VendorName} eq "Plug'n Play") {
-	    $monitor->{VendorName};
-	} else {
-	    my $merged_name = $monitor->{VendorName} . '|' . $monitor->{ModelName};
-
-	    if (!exists $h_monitors{$merged_name}) {
-		$merged_name = is_valid($monitor) ? 'Custom' : good_default_monitor();
-	    } else {
-		$merged_name;
-	    }
-	}
-    };
-
-    $in->ask_from_({ title => N("Monitor"),
-		     messages => $head_nb ? N("Choose a monitor for head #%d", $head_nb) : N("Choose a monitor"), 
-		     interactive_help_id => 'configureX_monitor' 
-		   },
-		  [ { val => \$merged_name, separator => '|', 
-		      list => ['Custom', "Plug'n Play", sort keys %h_monitors],
-		      format => sub { $_[0] eq 'Custom' ? N("Custom") : 
-				      $_[0] eq "Plug'n Play" ? N("Plug'n Play") . ($monitor->{VendorName} eq "Plug'n Play" ? " ($monitor->{ModelName})" : '') :
-				      $_[0] =~ /^Generic\|(.*)/ ? N("Generic") . "|$1" :  
-				      N("Vendor") . "|$_[0]" },
-		      sort => 0 } ]) or return;
-
-    if ($merged_name eq "Plug'n Play") {
-	local $::noauto = 0; #- hey, you asked for plug'n play, so i do probe!
-	delete @$monitor{'VendorName', 'ModelName', 'EISA_ID'};
-	if ($head_nb <= 1) {
-	    if (my $probed_info = probe($card_Driver)) {
-		put_in_hash($monitor, $probed_info);
-	    } else {
-		$in->ask_warn('', N("Plug'n Play probing failed. Please select the correct monitor"));
-		goto ask_monitor;
-	    }
-	} else {
-	    $monitor->{VendorName} = "Plug'n Play";
-	}
-    } elsif ($merged_name eq 'Custom') {
-	$in->ask_from('',
-N("The two critical parameters are the vertical refresh rate, which is the rate
-at which the whole screen is refreshed, and most importantly the horizontal
-sync rate, which is the rate at which scanlines are displayed.
-
-It is VERY IMPORTANT that you do not specify a monitor type with a sync range
-that is beyond the capabilities of your monitor: you may damage your monitor.
- If in doubt, choose a conservative setting."),
-		      [ { val => \$monitor->{HorizSync}, list => \@HorizSync_ranges, label => N("Horizontal refresh rate"), not_edit => 0 },
-			{ val => \$monitor->{VertRefresh}, list => \@VertRefresh_ranges, label => N("Vertical refresh rate"), not_edit => 0 } ]) or goto &choose;
-	delete @$monitor{'VendorName', 'ModelName', 'EISA_ID'};
-    } else {
-	put_in_hash($monitor, $h_monitors{$merged_name});
-    }
-    $monitor->{manually_chosen} = 1;
-    1;
-}
-
-sub configure_automatic {
-    my ($monitor) = @_;
-
-    if ($monitor->{EISA_ID}) {
-	log::l("EISA_ID: $monitor->{EISA_ID}");
-	if (my $mon = find { lc($_->{EISA_ID}) eq $monitor->{EISA_ID} } monitors_db()) {
-	    add2hash($monitor, $mon);
-	    log::l("EISA_ID corresponds to: $monitor->{ModelName}");
-	} elsif (!is_valid($monitor)) {
-	    log::l("unknown EISA_ID and partial DDC probe, so unknown monitor");
-	    delete @$monitor{'VendorName', 'ModelName', 'EISA_ID'};	    
-	}
-    } elsif ($monitor->{VendorName}) {
-	if (my $mon = find { $_->{VendorName} eq $monitor->{VendorName} && $_->{ModelName} eq $monitor->{ModelName} } monitors_db()) {
-	    put_in_hash($monitor, $mon);
-	}
-    }
-    is_valid($monitor);
-}
-
-sub is_valid {
-    my ($monitor) = @_;
-    $monitor->{HorizSync} && $monitor->{VertRefresh};
-}
-
-sub probe {
-    my ($o_card_Driver) = @_;
-    probe_DDC() || probe_DMI() || probe_using_X($o_card_Driver);
-}
-
-sub probe_DDC() {
-    my ($edid, $vbe) = any::monitor_full_edid() or return;
-    my $monitor = eval($edid);
-
-    if ($vbe =~ /Memory: (\d+)k/) {
-	$monitor->{VideoRam_probed} = $1;
-    }
-    $monitor->{ModeLine} = Xconfig::xfree::default_ModeLine();
-    my $detailed_timings = $monitor->{detailed_timings} || [];
-    foreach (grep { !$_->{bad_ratio} } @$detailed_timings) {
-	my $ratio = $_->{horizontal_active} / $_->{vertical_active};
-
-	if (abs($ratio - 4 / 3) < 0.01) {
-	    #- we don't want the 4/3 modelines otherwise they conflict with the Xorg builtin vesamodes
-	} else {
-	    unshift @{$monitor->{ModeLine}},
-	      { val => $_->{ModeLine}, pre_comment => $_->{ModeLine_comment} . "\n" };
-	}
-
-	if (@$detailed_timings == 1) {
-	    #- should we care about {has_preferred_timing} ?
-	    $monitor->{preferred_resolution} = { X => $_->{horizontal_active}, Y => $_->{vertical_active} };
-	}
-    }
-
-    if ($monitor->{EISA_ID}) {
-	$monitor->{VendorName} = "Plug'n Play";
-	$monitor->{ModelName} = $monitor->{monitor_name};
-	$monitor->{ModelName} =~ s/"/''/g;
-    }
-    configure_automatic($monitor) or return;
-    $monitor;
-}
-
-sub probe_using_X {
-    my ($card_Driver) = @_;
-
-    detect_devices::isLaptop() or return;
-
-    $card_Driver ||= do {
-	require Xconfig::card;
-	my @cards = Xconfig::card::probe();
-	$cards[0]{Driver};
-    } or return;
-
-    my $resolution = run_program::rooted_get_stdout($::prefix, 'monitor-probe-using-X', $card_Driver) or return;
-    generic_flat_panel(chomp_($resolution));
-}
-
-sub probe_DMI() {
-    my $res = detect_devices::probe_unique_name('Resolution');
-    $res && generic_flat_panel($res);
-}
-
-sub generic_flat_panel {
-    my ($resolution) = @_;
-    my ($X, $Y) = $resolution =~ /(\d+)x(\d+)/ or log::l("bad resolution $resolution"), return;
-    {
-	VendorName => 'Generic',
-	ModelName => "Flat Panel $resolution",
-	HorizSync => '31.5-100', VertRefresh => '60',
-	preferred_resolution => { X => $X, Y => $Y },
-    };
-}
-
-my $monitors_db;
-sub monitors_db() {
-    $monitors_db ||= readMonitorsDB("$ENV{SHARE_PATH}/ldetect-lst/MonitorsDB");
-    @$monitors_db;
-}
-sub readMonitorsDB {
-    my ($file) = @_;
-
-    my @monitors_db;
-    my $F = openFileMaybeCompressed($file);
-    local $_;
-    my $lineno = 0; while (<$F>) {
-	$lineno++;
-	s/\s+$//;
-	/^#/ and next;
-	/^$/ and next;
-
-	my @fields = qw(VendorName ModelName EISA_ID HorizSync VertRefresh dpms);
-	my %l; @l{@fields} = split /\s*;\s*/;
-	push @monitors_db, \%l;
-    }
-    \@monitors_db;
-}
-
-
-1;
-
diff --git a/perl-install/Xconfig/parse.pm b/perl-install/Xconfig/parse.pm
deleted file mode 100644
index 71062a093..000000000
--- a/perl-install/Xconfig/parse.pm
+++ /dev/null
@@ -1,205 +0,0 @@
-package Xconfig::parse; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-
-sub read_XF86Config {
-    my ($file) = @_;
-    my $raw_X = raw_from_file($file);
-    from_raw(@$raw_X);
-    $raw_X;
-}
-
-sub prepare_write_XF86Config {
-    my ($raw_X) = @_;
-    map { raw_to_string(before_to_string({ %$_ }, 0)) } @$raw_X;
-}
-
-sub write_XF86Config {
-    my ($raw_X, $file) = @_;
-    my @blocks = prepare_write_XF86Config($raw_X);
-    @blocks ? output($file, @blocks) : unlink $file;
-}
-
-sub read_XF86Config_from_string {
-    my ($s) = @_;
-    my $raw_X = raw_from_file('-', [ split "\n", $s ]);
-    from_raw(@$raw_X);
-    $raw_X;
-}
-
-#-###############################################################################
-#- raw reading/saving
-#-###############################################################################
-sub raw_from_file { #- internal
-    my ($file, $o_lines) = @_;
-    my $raw_X = [];
-
-    my $lines = $o_lines || [ cat_($file) ];
-    my $line;
-
-    my ($comment, $obj, @objs);
-
-    my $attach_comment = sub {
-	$obj || @objs or warn "$file:$line: can not attach comment\n";
-	if ($comment) {
-	    $comment =~ s/\n+$/\n/;
-	    ($obj || $objs[0])->{$_[0] . '_comment'} = $comment;
-	    $comment = '';
-	}
-    };
-
-    foreach (@$lines) {
-	$line++;
-	s/^\s*//; s/\s*$//;
-
-	if (/^$/) {
-	    $comment .= "\n" if $comment;
-	    next;
-	} elsif (@objs ? m/^#\W/ || /^#$/ : /^#/) {
-	    s/^#\s+/# /;
-	    $comment .= "$_\n";
-	    next;
-	}
-
-	if (/^Section\s+"(.*)"/i) {
-	    die "$file:$line: missing EndSection\n" if @objs;
-	    my $e = { name => $1, l => [], kind => 'Section' };
-	    push @$raw_X, $e;
-	    unshift @objs, $e; $obj = '';
-	    $attach_comment->('pre');
-	} elsif (/^Subsection\s+"(.*)"/i) {
-	    die "$file:$line: missing EndSubsection\n" if  @objs && $objs[0]{kind} eq 'Subsection';
-	    die "$file:$line: not in Section\n"        if !@objs || $objs[0]{kind} ne 'Section';
-	    my $e = { name => $1, l => [], kind => 'Subsection' };
-	    push @{$objs[0]{l}}, $e;
-	    unshift @objs, $e; $obj = '';
-	    $attach_comment->('pre');
-	} elsif (/^EndSection/i) {
-	    die "$file:$line: not in Section\n"        if !@objs || $objs[0]{kind} ne 'Section';
-	    $attach_comment->('post');
-	    shift @objs; $obj = '';
-	} elsif (/^EndSubsection/i) {
-	    die "$file:$line: not in Subsection\n"     if !@objs || $objs[0]{kind} ne 'Subsection';
-	    $attach_comment->('post');
-	    shift @objs; $obj = '';
-	} else {
-	    die "$file:$line: not in Section\n" if !@objs;
-
-	    my $commented = s/^#//;
-
-	    my $comment_on_line;
-	    s/(\s*#.*)/$comment_on_line = $1; ''/e;
-
-	    if (/^$/) {
-		die "$file:$line: weird";
-	    }
-
-	    (my $name, my $Option, $_)  = 
- 	      /^Option\s*"(.*?)"(.*)/ ? ($1, 1, $2) : /^(\S+)(.*)/ ? ($1, 0, $2) : internal_error($_);
-	    my ($val) = /(\S.*)/;
-
-	    my %e = (Option => $Option, commented => $commented, comment_on_line => $comment_on_line, pre_comment => $comment);
-	    $comment = '';
-	    $obj = { name => $name, val => $val };
-	    $e{$_} and $obj->{$_} = $e{$_} foreach keys %e;
-
-	    push @{$objs[0]{l}}, $obj;
-	}
-    }
-    $raw_X;
-}
-
-sub raw_to_string {
-    my ($e, $b_want_spacing) = @_;
-    my $s = do {
-	if ($e->{l}) {
-	    my $inside = join('', map_index { raw_to_string($_, $::i) } @{$e->{l}});
-	    $inside .= $e->{post_comment} || '';
-	    $inside =~ s/^/    /mg;
-	    qq(\n$e->{kind} "$e->{name}"\n) . $inside . "End$e->{kind}";
-	} else {
-	    ($e->{commented} ? '#' : '') .
-	      ($e->{Option} ? qq(Option "$e->{name}") : $e->{name}) .
-	      (defined $e->{val} ? ($e->{Option} && $e->{val} !~ /^"/ ? qq( "$e->{val}") : qq( $e->{val})) : '');
-	}
-    };
-    ($e->{pre_comment} ? ($b_want_spacing ? "\n" : '') . $e->{pre_comment} : '') . $s . ($e->{comment_on_line} || '') . "\n" . (!$e->{l} && $e->{post_comment} || '');
-}
-
-#-###############################################################################
-#- refine the data structure for easier use
-#-###############################################################################
-my %kind_names = (
-    Pointer  => [ qw(Protocol Device Emulate3Buttons Emulate3Timeout EmulateWheel EmulateWheelButton) ],
-    Mouse    => [ qw(DeviceName Protocol Device AlwaysCore Emulate3Buttons Emulate3Timeout EmulateWheel EmulateWheelButton) ], # Subsection in XInput
-    Keyboard => [ qw(Protocol Driver XkbModel XkbLayout XkbDisable) ],
-    Monitor  => [ qw(Identifier VendorName ModelName HorizSync VertRefresh) ],
-    Device   => [ qw(Identifier VendorName BoardName Chipset Driver VideoRam Screen BusID DPMS power_saver) ],
-    Display  => [ qw(Depth Modes Virtual) ], # Subsection in Device
-    Screen   => [ qw(Identifier Driver Device Monitor DefaultDepth DefaultColorDepth) ],
-    InputDevice => [ qw(Identifier Driver Protocol Device Type Mode XkbModel XkbLayout XkbDisable Emulate3Buttons Emulate3Timeout EmulateWheel EmulateWheelButton) ],
-    WacomCursor => [ qw(Port) ], #-\
-    WacomStylus => [ qw(Port) ], #--> Port must be first
-    WacomEraser => [ qw(Port) ], #-/
-    ServerLayout => [ qw(Identifier) ],
-);
-my @want_string = qw(Identifier DeviceName VendorName ModelName BoardName Driver Device Chipset Monitor Protocol XkbModel XkbLayout XkbOptions XkbCompat Load BusID);
-
-%kind_names = map_each { lc $::a => [ map { lc } @$::b ] } %kind_names;
-@want_string = map { lc } @want_string;
-
-sub from_raw {
-    sub from_raw__rec {
-	my ($current, $e) = @_;
-	if ($e->{l}) {
-	    from_raw($e);
-	    push @{$current->{l}{$e->{name}}}, $e;
-	} else {
-	    if (member(lc $e->{name}, @want_string)) {
-		$e->{val} =~ s/^"(.*)"$/$1/ or warn "$e->{name} $e->{val} has no quote\n";
-	    }
-
-	    if (member(lc $e->{name}, @{$kind_names{lc $current->{name}} || []})) {
-		if ($current->{l}{$e->{name}} && !$current->{l}{$e->{name}}{commented}) {
-		    warn "skipping conflicting line for $e->{name} in $current->{name}\n" if !$e->{commented};
-		} else {
-		    $current->{l}{$e->{name}} = $e;
-		}
-	    } else {
-		push @{$current->{l}{$e->{name}}}, $e;
-	    }
-	}
-	delete $e->{name};
-    }
-
-    foreach my $e (@_) {
-	($e->{l}, my $l) = ({}, $e->{l});
-	from_raw__rec($e, $_) foreach @$l;
-
-	delete $e->{kind};
-    }
-}
-
-sub before_to_string {
-    my ($e, $depth) = @_;
-
-    if ($e->{l}) {
-	$e->{kind} = $depth ? 'Subsection' : 'Section';
-
-	my %rated = map_index { $_ => $::i + 1 } @{$kind_names{lc $e->{name}} || []};
-	my @sorted = sort { ($rated{lc $a} || 99) <=> ($rated{lc $b} || 99) } keys %{$e->{l}};
-	$e->{l} = [ map {		  
-	    my $name = $_;
-	    map { 
-		before_to_string({ name => $name, %$_ }, $depth+1);
-	    } deref_array($e->{l}{$name});
-	} @sorted ];
-    } elsif (member(lc $e->{name}, @want_string)) {
-	$e->{val} = qq("$e->{val}");
-    }
-    $e;
-}
diff --git a/perl-install/Xconfig/proprietary.pm b/perl-install/Xconfig/proprietary.pm
deleted file mode 100644
index ed196deb7..000000000
--- a/perl-install/Xconfig/proprietary.pm
+++ /dev/null
@@ -1,35 +0,0 @@
-package Xconfig::proprietary; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-
-sub install_matrox_hal {
-    my ($prefix) = @_;
-    my $tmpdir = "$prefix/root/tmp";
-
-    my $tar = "mgadrivers-2.0.tgz";
-    my $dir_in_tar = "mgadrivers";
-    my $dest_dir = "$prefix/usr/X11R6/lib/modules/drivers";
-
-    #- already installed
-    return if -e "$dest_dir/mga_hal_drv.o" || $::testing;
-
-    system("wget -O $tmpdir/$tar ftp://ftp.matrox.com/pub/mga/archive/linux/2002/$tar") if !-e "$tmpdir/$tar";
-    system("tar xzC $tmpdir -f $tmpdir/$tar");
-
-    my $src_dir = "$tmpdir/$dir_in_tar/xfree86/4.2.1/drivers";
-    foreach (all($src_dir)) {
-	my $src = "$src_dir/$_";
-	my $dest = "$dest_dir/$_";
-	rename $dest, "$dest.non_hal";
-	cp_af($src, $dest_dir);
-    }
-    rm_rf("$tmpdir/$tar");
-    rm_rf("$tmpdir/$dir_in_tar");
-}
-
-1;
-
diff --git a/perl-install/Xconfig/resolution_and_depth.pm b/perl-install/Xconfig/resolution_and_depth.pm
deleted file mode 100644
index 294266480..000000000
--- a/perl-install/Xconfig/resolution_and_depth.pm
+++ /dev/null
@@ -1,386 +0,0 @@
-package Xconfig::resolution_and_depth; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-
-our %depth2text = (
-      8 => N_("256 colors (8 bits)"),
-     15 => N_("32 thousand colors (15 bits)"),
-     16 => N_("65 thousand colors (16 bits)"),
-     24 => N_("16 million colors (24 bits)"),
-);
-our @depths_available = ikeys(%depth2text);
-
-my @bios_vga_modes = (
-    { bios => 769, X =>  640, Y =>  480, Depth =>  8 },
-    { bios => 771, X =>  800, Y =>  600, Depth =>  8 },
-    { bios => 773, X => 1024, Y =>  768, Depth =>  8 },
-    { bios => 775, X => 1280, Y => 1024, Depth =>  8 },
-    { bios => 777, X => 1600, Y => 1200, Depth =>  8 }, 
-    { bios => 784, X =>  640, Y =>  480, Depth => 15 },
-    { bios => 787, X =>  800, Y =>  600, Depth => 15 },
-    { bios => 790, X => 1024, Y =>  768, Depth => 15 },
-    { bios => 793, X => 1280, Y => 1024, Depth => 15 },
-    { bios => 796, X => 1600, Y => 1200, Depth => 15 }, 
-    { bios => 785, X =>  640, Y =>  480, Depth => 16 },
-    { bios => 788, X =>  800, Y =>  600, Depth => 16 },
-    { bios => 791, X => 1024, Y =>  768, Depth => 16 },
-    { bios => 794, X => 1280, Y => 1024, Depth => 16 },
-    { bios => 797, X => 1600, Y => 1200, Depth => 16 }, 
-);
-
-sub from_bios {
-    my ($bios) = @_;
-    find { $_->{bios} == $bios } @bios_vga_modes;
-}
-
-sub bios_vga_modes() { @bios_vga_modes }
-
-sub size2default_resolution {
-    my ($size) = @_; #- size in inch
-
-    require detect_devices;
-    if (arch() =~ /ppc/) {
-	return "1024x768" if detect_devices::get_mac_model() =~ /^PowerBook|^iMac/;
-    } elsif (detect_devices::is_xbox()) {
-	return "640x480";
-    }
-
-    my %monitorSize2resolution = (
-	13 => "640x480",
-	14 => "800x600",
-	15 => "800x600",
-	16 => "1024x768",
-	17 => "1024x768",
-	18 => "1024x768",
-	19 => "1280x1024",
-	20 => "1280x1024",
-	21 => "1600x1200",
-	22 => "1600x1200",
-    );
-    $monitorSize2resolution{round($size)} || ($size < 13 ? "640x480" : "1600x1200");
-}
-
-sub to_string {
-    my ($resolution) = @_;
-    $resolution or return '';
-
-    $resolution->{X} ? sprintf("%sx%s %dbpp", @$resolution{'X', 'Y', 'Depth'}) : 'frame-buffer';
-}
-
-sub allowed {
-    my ($card) = @_;
-
-    my ($prefered_depth, @resolution_and_depth);
-    
-    if ($card->{Driver} eq 'fbdev') {
-	@resolution_and_depth = grep { $_->{Depth} == 16 } @bios_vga_modes;
-    } else {
-	my @depths;
-	if ($card->{Driver} eq 'fglrx') {
-	    @depths = 24;
-	} elsif ($card->{BoardName} eq 'RIVA128') { 
-	    @depths = qw(8 15 24);
-	} elsif ($card->{use_DRI_GLX}) {
-	    $prefered_depth = 16;
-	    @depths = (16, 24);
-	} else {
-	    @depths = our @depths_available;
-	}
-	my @resolutions = @Xconfig::xfree::resolutions;
-
-	push @resolution_and_depth,
-	  map {
-	      my $Depth = $_;
-	      map { m/(\d+)x(\d+)/ && { X => $1, Y => $2, Depth => $Depth } } @resolutions;
-	  } @depths;
-    }
-    $prefered_depth, @resolution_and_depth;
-}
-
-# ($card->{VideoRam} || ($card->{server} eq 'FBDev' ? 2048 : 32768))
-sub filter_using_VideoRam {
-    my ($VideoRam, @resolutions) = @_;
-    my $mem = 1024 * $VideoRam;
-    grep { $_->{X} * $_->{Y} * $_->{Depth}/8 <= $mem } @resolutions;
-    
-}
-sub filter_using_HorizSync_VertRefresh {
-    my ($HorizSync, $VertRefresh, @resolutions) = @_;
-    my $max_hsync = 1000 * max(split(/[,-]/, $HorizSync));
-    my ($min_vsync, $max_vsync) = (min(split(/[,-]/, $VertRefresh)), max(split(/[,-]/, $VertRefresh)));
-
-    #- enforce at least 60Hz, if max_vsync > 100 (ie don't do it on LCDs which are ok with low vsync)
-    $min_vsync = max(60, $min_vsync) if $max_vsync > 100;
-
-    #- computing with {Y} which is active sync instead of total sync, but that's ok
-    grep { $max_hsync / $_->{Y} > $min_vsync } @resolutions;
-}
-
-sub choose {
-    my ($in, $default_resolution, @resolutions) = @_;
-
-    my $resolution = $default_resolution || {};
-    $in->ask_from(N("Resolutions"), "",
-		  [ {
-		     val => \$resolution, type => 'list', sort => 0,
-		     list => [ sort { $a->{X} <=> $b->{X} } @resolutions ],
-		     format => \&to_string,
-		    } ]) or return;
-    $resolution;
-}
-
-
-sub choices {
-    my ($_raw_X, $resolution_wanted, $card, $monitors) = @_;
-    $resolution_wanted ||= {};
-
-    my ($prefered_depth, @resolutions) = allowed($card);
-
-    @resolutions = filter_using_HorizSync_VertRefresh($monitors->[0]{HorizSync}, $monitors->[0]{VertRefresh}, @resolutions) if $monitors->[0]{HorizSync};
-    @resolutions = filter_using_VideoRam($card->{VideoRam}, @resolutions) if $card->{VideoRam};
-
-    #- sort it, so we can take the first one when we want the "best"
-    @resolutions = sort { $b->{X} <=> $a->{X} || $b->{Y} <=> $a->{Y} || $b->{Depth} <=> $a->{Depth} } @resolutions;
-
-    if ($resolution_wanted->{X} && !$resolution_wanted->{Y}) {
-	#- assuming ratio 4/3
-	$resolution_wanted->{Y} = round($resolution_wanted->{X} * 3 / 4);
-    } elsif (!$resolution_wanted->{X}) {
-	if ($monitors->[0]{preferred_resolution}) {
-	    put_in_hash($resolution_wanted, $monitors->[0]{preferred_resolution});
-	} elsif ($monitors->[0]{ModelName} =~ /^Flat Panel (\d+)x(\d+)$/) {
-	    put_in_hash($resolution_wanted, { X => $1, Y => $2 });
-	} elsif ($monitors->[0]{diagonal_size}) {
-	    my ($X, $Y) = split('x', size2default_resolution($monitors->[0]{diagonal_size} * 1.08));
-	    put_in_hash($resolution_wanted, { X => $X, Y => $Y });
-	} else {
-	    put_in_hash($resolution_wanted, { X => 1024, Y => 768 });
-	}
-    }
-    my @matching = grep { $_->{X} eq $resolution_wanted->{X} && $_->{Y} eq $resolution_wanted->{Y} } @resolutions;
-    if (!@matching) {
-	#- hard choice :-(
-	#- first trying the greater resolution with same ratio
-	my $ratio = $resolution_wanted->{X} / $resolution_wanted->{Y};
-	@matching = grep { abs($ratio - $_->{X} / $_->{Y}) < 0.01 } @resolutions;
-    }
-    if (!@matching) {
-	#- really hard choice :'-(
-	#- take the first available resolution <= the wanted resolution
-	@matching = grep { $_->{X} < $resolution_wanted->{X} } @resolutions;
-    }
-    if (!@matching) {
-	@matching = @resolutions;
-    }
-
-    my $default_resolution;
-    foreach my $Depth ($resolution_wanted->{Depth}, $prefered_depth) {
-	$Depth and $default_resolution ||= find { $_->{Depth} eq $Depth } @matching;
-    }
-    $default_resolution ||= $matching[0];
-
-    $default_resolution, @resolutions;
-}
-
-sub configure {
-    my ($in, $raw_X, $card, $monitors, $b_auto) = @_;
-
-    my ($default_resolution, @resolutions) = choices($raw_X, $raw_X->get_resolution, $card, $monitors);
-
-    if ($b_auto) {
-	#- use $default_resolution
-	if ($card->{Driver} eq 'fglrx') {
-	    $default_resolution = first(find { $default_resolution->{Y} eq $_->{Y} && $_->{Depth} == 24 }
-					$default_resolution, @resolutions);
-	    $default_resolution ||= first(find { $_->{Depth} == 24 } $default_resolution, @resolutions);
-	}
-    } elsif ($in->isa('interactive::gtk')) {
-	$default_resolution = choose_gtk($in, $card, $default_resolution, @resolutions) or return;
-    } else {
-	$default_resolution = choose($in, $default_resolution, @resolutions) or return;
-    }
-    set_resolution($raw_X, $default_resolution);
-
-    $default_resolution;
-}
-
-sub configure_auto_install {
-    my ($raw_X, $card, $monitors, $old_X) = @_;
-
-    my $resolution_wanted = do {
-	my ($X, $Y) = split('x', $old_X->{resolution_wanted});
-	{ X => $X, Y => $Y, Depth => $old_X->{default_depth} };
-    };
-
-    my ($default_resolution) = choices($raw_X, $resolution_wanted, $card, $monitors);
-    $default_resolution or die "you selected an unusable depth";
-
-    set_resolution($raw_X, $default_resolution);
-
-    $default_resolution;
-}
-
-sub set_resolution {
-    my ($raw_X, $resolution) = @_; 
-    $raw_X->set_resolution($resolution);
-    set_default_background($resolution);
-}
-sub set_default_background {
-    my ($resolution) = @_;
-
-    my $ratio = $resolution->{X} / $resolution->{Y};
-    my $dir = "$::prefix/usr/share/mdk/backgrounds";
-    my %theme = getVarsFromSh("$::prefix/etc/sysconfig/bootsplash");
-    my @l = 
-      sort {
-	  $a->[1] <=> $b->[1] || $b->[2] <=> $a->[2] || $a->[3] <=> $b->[3];
-      } map {
-	  if (my ($X, $Y) = /^\Q$theme{THEME}\E-(\d+)x(\d+).png$/) {
-	      [
-		  $_, 
-		  int(abs($ratio - $X / $Y) * 100), #- we want the nearest ratio (precision .01)
-		  $X >= $resolution->{X}, #- then we don't want a resolution smaller
-		  abs($X - $resolution->{X}), #- the nearest resolution
-	      ];
-	  } else { () }
-      } all($dir);
-
-    symlinkf $l[0][0], "$dir/default.png";
-}
-
-sub resolution2ratio {
-    my ($resolution, $b_non_strict) = @_;
-    my $res = $resolution->{X} . 'x' . $resolution->{Y};
-    $res eq '1280x1024' && $b_non_strict ? '4/3' : $Xconfig::xfree::resolution2ratio{$res};
-}
-
-sub choose_gtk {
-    my ($in, $card, $default_resolution, @resolutions) = @_;
-
-    $_->{ratio} ||= resolution2ratio($_) foreach @resolutions;
-
-    my $chosen_Depth = $default_resolution->{Depth};
-    my $chosen_res = { X => $default_resolution->{X} || 1024, Y => $default_resolution->{Y} };
-    my $chosen_ratio = resolution2ratio($chosen_res, 'non-strict') || '4/3';
-
-    my $filter_on_ratio = sub {
-	grep {
-	    !$chosen_ratio
-	      || $_->{ratio} eq $chosen_ratio 
-	      || $chosen_ratio eq '4/3' && "$_->{X}x$_->{Y}" eq '1280x1024';
-	} @_;
-    };
-    my $filter_on_Depth = sub {
-	grep { $_->{Depth} == $chosen_Depth } @_;
-    };
-    my $filter_on_res = sub {
-	grep { $_->{X} == $chosen_res->{X} && $_->{Y} == $chosen_res->{Y} } @_;
-    };
-    #- $chosen_res must be one of @resolutions, so that it has a correct {ratio} field
-    $chosen_res = first($filter_on_res->(@resolutions)) || $resolutions[0];
-
-    require ugtk2;
-    mygtk2->import;
-    ugtk2->import(qw(:create :helpers :wrappers));
-    my $W = ugtk2->new(N("Resolution"), modal => 1);
-
-    my %monitor_images_x_res = do {
-	my @l = qw(640 800 1024 1152 1280 1400 1600 1920 2048);
-	my %h = map { $_ => ugtk2::_find_imgfile("monitor-$_.png") } @l;
-
-	#- for the other, use the biggest smaller
-	foreach my $x_res (uniq map { $_->{X} } @resolutions) {
-	    my $x_res_ = max(grep { $_ <= $x_res } @l);
-	    $h{$x_res} ||= $h{$x_res_} || $h{640};
-	}
-	%h;
-    };
-
-    my $res2text = sub { "$_[0]{X}x$_[0]{Y}" . ($chosen_ratio || $_[0]{ratio} =~ /other/ ? '' : "  ($_[0]{ratio})") };
-    my @matching_ratio;
-    my $proposed_resolutions = [];
-    my $set_proposed_resolutions = sub {
-	my ($suggested_res) = @_;
-	@matching_ratio = $filter_on_ratio->(@resolutions);
-	gtkval_modify(\$proposed_resolutions, [ 
-	    (reverse uniq_ { $res2text->($_) } @matching_ratio),
-	    if_($chosen_ratio, { text => N_("Other") }),
-	]);
-	if (!$filter_on_res->(@matching_ratio)) {
-	    my $res = $suggested_res || find { $_->{X} == $chosen_res->{X} } @matching_ratio;
-	    gtkval_modify(\$chosen_res, $res || $matching_ratio[0]);
-	}
-    };
-    $set_proposed_resolutions->();
-
-    my $depth_combo = gtknew('ComboBox', width => 220, 
-			     text_ref => \$chosen_Depth,
-			     format => sub { translate($depth2text{$_[0]}) },
-			     list => [ uniq(reverse map { $_->{Depth} } @resolutions) ],
-			     changed => sub {
-				 my @matching_Depth = $filter_on_Depth->(@matching_ratio);
-				 if (!$filter_on_res->(@matching_Depth)) {
-				     gtkval_modify(\$chosen_res, $matching_Depth[0]);
-				 }
-			     });
-    my $previous_res = $chosen_res;
-    my $res_combo = gtknew('ComboBox', 
-			   text_ref => \$chosen_res,
-			   format => sub { $_[0]{text} ? translate($_[0]{text}) : &$res2text },
-			   list_ref => \$proposed_resolutions,
-			   changed => sub {
-			       if ($chosen_res->{text}) {
-				   undef $chosen_ratio;
-				   $set_proposed_resolutions->($previous_res);
-			       } else {
-				   my @matching_res = $filter_on_res->(@matching_ratio);
-				   if (!$filter_on_Depth->(@matching_res)) {
-				       gtkval_modify(\$chosen_Depth, $matching_res[0]{Depth});
-				   }
-				   $previous_res = $chosen_res;
-			       }
-			   });
-    my $pix_colors = gtknew('Image', 
-			    file_ref => \$chosen_Depth,
-			    format => sub {
-				$_[0] >= 24 ? "colors.png" : $_[0] >= 15 ? "colors16.png" : "colors8.png";
-			    });
-    my $pixmap_mo = gtknew('Image', 
-			   file_ref => \$chosen_res,
-			   format => sub {
-			       $monitor_images_x_res{$_[0]{X}} or internal_error("no image for resolution $chosen_res->{X}");
-			   });
-
-    my $help_sub = $in->interactive_help_sub_display_id('configureX_resolution');
-    gtkadd($W->{window},
-	   gtkpack_($W->create_box_with_title(N("Choose the resolution and the color depth"),
-					      if_($card->{BoardName}, "(" . N("Graphics card: %s", $card->{BoardName}) . ")"),
-					     ),
-		    1, '',
-		    0, $pixmap_mo,
-		    0, gtknew('HBox', children => [
-			  1, '',
-			  0, gtknew('Table', col_spacings => 5, row_spacings => 5, 
-				    children => [
-						 [ $res_combo, gtknew('Label', text => "") ],
-						 [ $depth_combo, gtknew('Frame', shadow_type => 'etched_out', child => $pix_colors) ],
-						]),
-			  1, '',
-		       ]),
-	            1, '',
-		    0, gtkadd($W->create_okcancel(N("Ok"), N("Cancel"), '', if_($help_sub, [ N("Help"), $help_sub, 1 ]))),
-		    ));
-    $W->{ok}->grab_focus;
-
-    $W->main or return;
-
-    find { $_->{X} == $chosen_res->{X} && 
-	   $_->{Y} == $chosen_res->{Y} && 
-	   $_->{Depth} == $chosen_Depth } @resolutions;
-}
-
-1;
diff --git a/perl-install/Xconfig/screen.pm b/perl-install/Xconfig/screen.pm
deleted file mode 100644
index e0a3ebd64..000000000
--- a/perl-install/Xconfig/screen.pm
+++ /dev/null
@@ -1,29 +0,0 @@
-package Xconfig::screen; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-
-
-sub configure {
-    my ($raw_X) = @_;
-
-    my @devices = $raw_X->get_devices;
-    my @monitors = $raw_X->get_monitors;
-
-    if (@monitors < @devices) {
-	$raw_X->set_monitors(@monitors, ({}) x (@devices - @monitors));
-	@monitors = $raw_X->get_monitors;
-    }
-
-    my @sections = mapn {
-	my ($device, $monitor) = @_;
-	{ Device => $device->{Identifier}, Monitor => $monitor->{Identifier} };
-    } \@devices, \@monitors;
-
-    $raw_X->set_screens(@sections);
-    1;
-}
-
-1;
diff --git a/perl-install/Xconfig/test.pm b/perl-install/Xconfig/test.pm
deleted file mode 100644
index 524530bef..000000000
--- a/perl-install/Xconfig/test.pm
+++ /dev/null
@@ -1,140 +0,0 @@
-package Xconfig::test; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::card;
-use run_program;
-use common;
-use log;
-
-
-my $tmpconfig = "/tmp/Xconfig";
-
-
-sub xtest {
-    my ($display) = @_;
-    eval {
-	require xf86misc::main;
-	xf86misc::main::Xtest($display);
-    };
-}
-
-sub test {
-    my ($in, $raw_X, $card, $auto, $skip_badcard) = @_;
-
-    my $bad_card = !Xconfig::card::check_bad_card($card);
-    return 1 if $skip_badcard && $bad_card;
-
-    if ($bad_card || !$auto) {
-	$in->ask_yesorno(N("Test of the configuration"), 
-			 N("Do you want to test the configuration?") . ($bad_card ? "\n" . N("Warning: testing this graphic card may freeze your computer") : ''),
-			 !$bad_card) or return 1;
-    }
-
-    unlink "$::prefix/tmp/.X9-lock";
-
-    #- create a link from the non-prefixed /tmp/.X11-unix/X9 to the prefixed one
-    #- that way, you can talk to :9 without doing a chroot
-    #- but take care of non X11 install :-)
-    if (-d "/tmp/.X11-unix") {
-	symlinkf "$::prefix/tmp/.X11-unix/X9", "/tmp/.X11-unix/X9" if $::prefix;
-    } else {
-	symlinkf "$::prefix/tmp/.X11-unix", "/tmp/.X11-unix" if $::prefix;
-    }
-
-    #- ensure xfs is running
-    fuzzy_pidofs(qr/\bxfs\b/) or do { run_program::rooted($::prefix, "/etc/rc.d/init.d/xfs", $_) foreach 'stop', 'start' };
-    fuzzy_pidofs(qr/\bxfs\b/) or die "xfs is not running";
-
-    my $f = $::testing ? $tmpconfig : "/etc/X11/XF86Config.test";
-    $raw_X->write("$::prefix/$f");
-
-    my $f_err = common::secured_file($::prefix . ($ENV{TMPDIR} || "$ENV{HOME}/tmp") . '/.drakx.Xoutput');
-    
-    my $pid;
-    unless ($pid = fork()) {
-	system("xauth add :9 . `mcookie`");
-	open STDERR, ">$f_err";
-	chroot $::prefix if $::prefix;
-	exec 'Xorg', '-xf86config', $f, ":9" or c::_exit(0);
-    }
-
-    do { sleep 1 } until xtest(":9") || waitpid($pid, c::WNOHANG());
-
-    my $_b = before_leaving { unlink $f_err };
-
-    my $warn_error = sub {
-	my ($error_msg) = @_;
-	$in->ask_warn('', [ N("An error occurred:\n%s\nTry to change some parameters", $error_msg) ]);
-    };
-
-    if (!xtest(":9")) {
-	open(my $F, $f_err);
-
-	local $_;
-      i: while (<$F>) {
-	    if (/^\(EE\)/ && !/Disabling/ || /^Fatal\b/) {
-		my @msg = !/error/ && $_;
-		local $_;
-		while (<$F>) {
-		    /reporting a problem/ and last;
-		    $warn_error->(join('', @msg, $_));
-		    return 0;
-		}
-	    }
-	}
-    }
-
-    open(my $F, "|perl 2>/dev/null");
-    printf $F q(
-        use lib qw(%s);
-        BEGIN { $::no_ugtk_init = 1 }
-        require lang;
-        require ugtk2; #- help perl_checker
-        ugtk2->import(qw(:wrappers :helpers)); #- help perl_checker
-	use interactive::gtk;
-        use run_program;
-        use common;
-
-        $::prefix = "%s";
-
-        lang::bindtextdomain();
-
-	$ENV{DISPLAY} = ":9";
-        Gtk2->init;
-
-        gtkset_background(200 * 257, 210 * 257, 210 * 257);
-        my $text = Gtk2::Label->new;
-        my $time = 12;
-        Glib::Timeout->add(1000, sub {
-	    $text->set(sprintf(translate("%s"), $time));
-	    $time-- or Gtk2->main_quit;
-            1;
-	});
-
-        eval {  #- eval it so that missing pixmap will not break the test completely
-            my $root = gtkroot();
-            my $gc = Gtk2::Gdk::GC->new($root);
-            my $pixbuf = Gtk2::Gdk::Pixbuf->new_from_file("$::prefix/usr/share/mdk/xfdrake/xfdrake-test-card.png");
-            my ($w, $h) = ($pixbuf->get_width, $pixbuf->get_height);
-            my $pixmap = Gtk2::Gdk::Pixmap->new($root, $w, $h, $root->get_depth);
-            $pixbuf->render_to_drawable($pixmap, $gc, 0, 0, 0, 0, $w, $h, 'none', 0, 0);
-            $root->set_back_pixmap($pixmap, 0);
-            $root->clear;
-        };
-
-        my $in = interactive::gtk->new;
-	$in->exit($in->ask_yesorno('', [ translate("%s"), $text ], 0) ? 0 : 222);
-    ), join(' ', @INC), $::prefix, N_("Leaving in %d seconds"), N_("Is this the correct setting?");
-    my $rc = close $F;
-    my $err = $?;
-
-    $rc || $err == 222 << 8 or $warn_error->('');
-
-    unlink "$::prefix/$f", "$::prefix/$f-4";
-    unlink "/tmp/.X11-unix/X9" if $::prefix;
-    kill 2, $pid;
-
-    $rc;
-}
diff --git a/perl-install/Xconfig/various.pm b/perl-install/Xconfig/various.pm
deleted file mode 100644
index c38205fe6..000000000
--- a/perl-install/Xconfig/various.pm
+++ /dev/null
@@ -1,178 +0,0 @@
-package Xconfig::various; # $Id$
-
-use diagnostics;
-use strict;
-
-use Xconfig::card;
-use Xconfig::default;
-use Xconfig::resolution_and_depth;
-use common;
-
-
-sub to_string {
-    my ($raw_X) = @_;
-
-    $raw_X->is_fbdev ? 'frame-buffer' : Xconfig::resolution_and_depth::to_string($raw_X->get_resolution);
-}
-
-sub info {
-    my ($raw_X, $card) = @_;
-    my $info;
-    my $xf_ver = Xconfig::card::xorg_version();
-    my $title = $card->{use_DRI_GLX} ? N("Xorg %s with 3D hardware acceleration", $xf_ver) : 
-                                       N("Xorg %s", $xf_ver);
-    my $keyboard = eval { $raw_X->get_keyboard } || {};
-    my @monitors = eval { $raw_X->get_monitors };
-    my $device = eval { $raw_X->get_device } || {};
-    my $mouse = eval { first($raw_X->get_mice) } || {};
-
-    $info .= N("Keyboard layout: %s\n", $keyboard->{XkbLayout});
-    $info .= N("Mouse type: %s\n", $mouse->{Protocol});
-    $info .= N("Mouse device: %s\n", $mouse->{Device}) if $::expert;
-    foreach my $monitor (@monitors) {
-	$info .= N("Monitor: %s\n", $monitor->{ModelName});
-	$info .= N("Monitor HorizSync: %s\n", $monitor->{HorizSync}) if $::expert;
-	$info .= N("Monitor VertRefresh: %s\n", $monitor->{VertRefresh}) if $::expert;
-    }
-    $info .= N("Graphics card: %s\n", $device->{VendorName} . ' ' . $device->{BoardName});
-    $info .= N("Graphics memory: %s kB\n", $device->{VideoRam}) if $device->{VideoRam};
-    if (my $resolution = eval { $raw_X->get_resolution }) {
-	$info .= N("Color depth: %s\n", translate($Xconfig::resolution_and_depth::depth2text{$resolution->{Depth}}));
-	$info .= N("Resolution: %s\n", join('x', @$resolution{'X', 'Y'}));
-    }
-    $info .= N("Xorg driver: %s\n", $device->{Driver}) if $device->{Driver};
-    "$title\n\n$info";
-}
-
-sub various {
-    my ($in, $card, $options, $b_auto) = @_;
-
-    tvout($in, $card, $options) if !$b_auto;
-    choose_xdm($in, $b_auto);
-    1;
-}
-
-sub runlevel {
-    my ($o_runlevel) = @_;
-    my $f = "$::prefix/etc/inittab";
-    -r $f or log::l("missing inittab!!!"), return;
-    if ($o_runlevel) {
-	substInFile { s/^id:\d:initdefault:\s*$/id:$o_runlevel:initdefault:\n/ } $f if !$::testing;
-    } else {
-	cat_($f) =~ /^id:(\d):initdefault:\s*$/m && $1;
-    }
-}
-
-sub choose_xdm {
-    my ($in, $b_auto) = @_;
-    my $xdm = $::isStandalone ? runlevel() == 5 : 1;
-
-    if (!$b_auto) {
-	$xdm = $in->ask_yesorno_({ 
-				  title => N("Graphical interface at startup"),
-				  messages =>
-N("I can setup your computer to automatically start the graphical interface (Xorg) upon booting.
-Would you like Xorg to start when you reboot?"),
-				  interactive_help_id => 'configureXxdm',
-				 }, $xdm);
-    }
-    runlevel($xdm ? 5 : 3);
-}
-
-sub tvout {
-    my ($in, $card, $options) = @_;
-
-    $card->{FB_TVOUT} && $options->{allowFB} or return;
-
-    $in->ask_yesorno('', N("Your graphic card seems to have a TV-OUT connector.
-It can be configured to work using frame-buffer.
-
-For this you have to plug your graphic card to your TV before booting your computer.
-Then choose the \"TVout\" entry in the bootloader
-
-Do you have this feature?")) or return;
-    
-    #- rough default value (rationale: http://download.nvidia.com/XFree86_40/1.0-2960/README.txt)
-    require timezone;
-    my $norm = timezone::read()->{timezone} =~ /America/ ? 'NTSC' : 'PAL';
-
-    $norm = $in->ask_from_list('', N("What norm is your TV using?"), [ 'NTSC', 'PAL' ], $norm) or return;
-
-    configure_FB_TVOUT($in->do_pkgs, { norm => $norm });
-}
-
-sub configure_FB_TVOUT {
-    my ($do_pkgs, $use_FB_TVOUT) = @_;
-
-    my $raw_X = Xconfig::default::configure($do_pkgs);
-    return if is_empty_array_ref($raw_X);
-
-    $raw_X->set_monitors({ HorizSync => '30-50', VertRefresh => ($use_FB_TVOUT->{norm} eq 'NTSC' ? 60 : 50),
-			   ModeLine => [ 
-	{ val => '"640x480"   29.50       640 675 678 944  480 530 535 625', pre_comment => "# PAL\n" },
-	{ val => '"800x600"   36.00       800 818 820 960  600 653 655 750' },
-	{ val => '"640x480"  28.195793   640 656 658 784  480 520 525 600', pre_comment => "# NTSC\n" },
-	{ val => '"800x600"  38.769241   800 812 814 880  600 646 649 735' },
-    ] });
-    $raw_X->set_devices({ Driver => 'fbdev' });
-
-    my ($device) = $raw_X->get_devices;
-    my ($monitor) = $raw_X->get_monitors;
-    $raw_X->set_screens({ Device => $device->{Identifier}, Monitor => $monitor->{Identifier} });
-
-    my $Screen = $raw_X->get_default_screen;
-    $Screen->{Display} = [ map { { l => { Depth => { val => $_ } } } } 8, 16 ];
-
-    $raw_X->write("$::prefix/etc/X11/XF86Config.tvout");
-
-    check_XF86Config_symlink();
-
-    {
-	require bootloader;
-	require fsedit;
-	require detect_devices;
-	my $all_hds = $::isInstall ? $::o->{all_hds} : fsedit::get_hds();
-	my $bootloader = $::isInstall ? $::o->{bootloader} : bootloader::read($all_hds);
-	
-	if (my $tvout = bootloader::duplicate_kernel_entry($bootloader, 'TVout')) {
-	    $tvout->{append} .= " XFree=tvout";
-	    bootloader::install($bootloader, $all_hds);
-	}
-    }
-}
-
-sub check_XF86Config_symlink() {
-    my $f = "$::prefix/etc/X11/XF86Config";
-    if (!-l $f && -e "$f.tvout") {
-	rename $f, "$f.standard";
-	symlink "XF86Config.standard", $f;
-    }
-}
-
-sub setupFB {
-    my ($bios_vga_mode) = @_;
-
-    require bootloader;
-    my ($bootloader, $all_hds);
-
-    if ($::isInstall && !$::globetrotter) {
-	($bootloader, $all_hds) = ($::o->{bootloader}, $::o->{all_hds});
-    } else {
-	require fsedit;
-	require fs;
-	require bootloader;
-	$all_hds = fsedit::get_hds();
-	fs::get_info_from_fstab($all_hds);
-
-	$bootloader = bootloader::read($all_hds) or return;
-    }
-
-    foreach (@{$bootloader->{entries}}) {
-	$_->{vga} = $bios_vga_mode if $_->{vga}; #- replace existing vga= with
-    }
-
-    bootloader::action($bootloader, 'write', $all_hds);
-    bootloader::action($bootloader, 'when_config_changed');
-}
-
-1;
diff --git a/perl-install/Xconfig/xfree.pm b/perl-install/Xconfig/xfree.pm
deleted file mode 100644
index 5cba3eec4..000000000
--- a/perl-install/Xconfig/xfree.pm
+++ /dev/null
@@ -1,742 +0,0 @@
-package Xconfig::xfree; # $Id$
-
-use diagnostics;
-use strict;
-
-use common;
-use Xconfig::parse;
-
-#- mostly internal only
-sub new {
-    my ($class, $val) = @_;
-    bless $val, $class;
-}
-
-sub _conf_files() {
-    map { "$::prefix/etc/X11/$_" } 'xorg.conf', 'XF86Config-4', 'XF86Config';
-}
-
-################################################################################
-# I/O ##########################################################################
-################################################################################
-sub read_and_prepare_write {
-    my ($class) = @_;
-    my $file = find { -f $_ } _conf_files();
-    my $raw_X = $class->new(Xconfig::parse::read_XF86Config($file));
-    my $before = $raw_X->prepare_write;
-
-    if (my ($Keyboard) = $raw_X->get_InputDevices('Keyboard')) {
-	$Keyboard->{Driver}{val} = 'keyboard';
-    }
-
-    #- ugly hack to fix empty ModeLine lines, XFdrake seems to generate some, but where???
-    #- at least this allows fixing the pb by re-running XFdrake 
-    foreach ($raw_X->get_Sections('Monitor')) {
-	my $l = $_->{ModeLine} or next;
-	@$l = grep { $_->{val} } @$l;
-    }
-
-    $raw_X, $before;
-}
-sub read {
-    my ($class) = @_;
-    first(read_and_prepare_write($class));
-}
-sub write {
-    my ($raw_X, $o_file) = @_;
-    my $file = $o_file || first(_conf_files());
-    if (!$o_file) {
-	foreach (_conf_files()) {
-	    if (-l $_) {
-		unlink $_;
-	    } else {
-		renamef($_, "$_.old"); #- there will not be any XF86Config nor XF86Config-4 anymore, we want this!
-	    }
-	}
-	#- keep it for old programs still using this name
-	symlink basename($file), "$::prefix/etc/X11/XF86Config";
-    }
-    Xconfig::parse::write_XF86Config($raw_X, $file);
-}
-sub prepare_write {
-    my ($raw_X) = @_;
-    join('', Xconfig::parse::prepare_write_XF86Config($raw_X));
-}
-sub empty_config {
-    my ($class) = @_;
-    $class->new(Xconfig::parse::read_XF86Config_from_string(our $default_header));
-}
-
-################################################################################
-# keyboard #####################################################################
-################################################################################
-my @keyboard_fields = qw(XkbLayout XkbModel XkbDisable XkbOptions XkbCompat);
-sub get_keyboard {
-    my ($raw_X) = @_;
-    my $raw_kbd = first(map { $raw_X->get_InputDevices($_) } 'keyboard', 'kbd') or die "no keyboard section";
-    raw_export_section($raw_kbd, \@keyboard_fields);
-}
-sub set_keyboard {
-    my ($raw_X, $kbd) = @_;
-    my $raw_kbd = first(map { $raw_X->get_InputDevices($_) } 'keyboard', 'kbd') || _new_keyboard_section($raw_X);
-    raw_import_section($raw_kbd, $kbd);
-    _set_Option('keyboard', $raw_kbd, keys %$kbd);
-}
-sub _new_keyboard_section {
-    my ($raw_X) = @_;
-    my $raw_kbd = { Identifier => { val => 'Keyboard1' }, Driver => { val => 'keyboard' } };
-    $raw_X->add_Section('InputDevice', $raw_kbd);
-
-    my $layout = get_ServerLayout($raw_X)->{InputDevice} ||= [];
-    push @$layout, { val => '"Keyboard1" "CoreKeyboard"' };
-
-    $raw_kbd;
-}
-
-
-################################################################################
-# mouse ########################################################################
-################################################################################
-#- example: { Protocol => 'IMPS/2', Device => '/dev/psaux', Emulate3Buttons => undef, Emulate3Timeout => 50, ZAxisMapping => [ '4 5', '6 7' ] }
-my @mouse_fields = qw(Protocol Device ZAxisMapping Emulate3Buttons Emulate3Timeout); #-);
-sub get_mice {
-    my ($raw_X) = @_;
-    my @raw_mice = $raw_X->get_InputDevices('mouse');
-    map { raw_export_section($_, \@mouse_fields) } @raw_mice;
-}
-sub set_mice {
-    my ($raw_X, @mice) = @_;
-    my @raw_mice = _new_mouse_sections($raw_X, int @mice);
-    mapn { 
-	my ($raw_mouse, $mouse) = @_;
-	raw_import_section($raw_mouse, $mouse);
-	_set_Option('mouse', $raw_mouse, keys %$mouse);
-    } \@raw_mice, \@mice;
-}
-sub _new_mouse_sections {
-    my ($raw_X, $nb_new) = @_;
-    $raw_X->remove_InputDevices('mouse');
-    
-    my $layout = get_ServerLayout($raw_X)->{InputDevice} ||= [];
-    @$layout = grep { $_->{val} !~ /^"Mouse/ } @$layout;
-    
-    $nb_new or return;
-    
-    my @l = map {
-	my $h = { Identifier => { val => "Mouse$_" }, Driver => { val => 'mouse' } };
-	$raw_X->add_Section('InputDevice', $h);
-    } (1 .. $nb_new);
-    
-    push @$layout, { val => qq("Mouse1" "CorePointer") };
-    push @$layout, { val => qq("Mouse$_" "SendCoreEvents") } foreach 2 .. $nb_new;
-    
-    @l;
-}
-
-
-################################################################################
-# resolution ###################################################################
-################################################################################
-sub get_resolution {
-    my ($raw_X, $o_Screen) = @_;
-    my $Screen = $o_Screen || $raw_X->get_default_screen or return {};
-    
-    my $depth = val($Screen->{DefaultColorDepth} || $Screen->{DefaultDepth});
-    my $Display = find { !$depth || val($_->{l}{Depth}) eq $depth } @{$Screen->{Display} || []} or return {};
-    $Display->{l}{Virtual} && val($Display->{l}{Virtual}) =~ /(\d+)\s+(\d+)/ or
-      val($Display->{l}{Modes}) =~ /(\d+)x(\d+)/ or return {};
-    { X => $1, Y => $2, Depth => val($Display->{l}{Depth}) };
-}
-sub set_resolution {
-    my ($raw_X, $resolution, $o_Screen_) = @_;
-    
-    foreach my $Screen ($o_Screen_ ? $o_Screen_ : $raw_X->get_Sections('Screen')) {
-	$Screen ||= $raw_X->get_default_screen or internal_error('no screen');
-
-	my $Mode_name = (any { $_->{l}{Modes} } @{$Screen->{Display} || []}) ? 'Modes' : 'Virtual';
-	my $Mode = sprintf($Mode_name eq 'Modes' ? '"%dx%d"' : '%d %d', @$resolution{'X', 'Y'});
-	
-	delete $Screen->{DefaultDepth};
-	$Screen->{DefaultColorDepth} = { val => $resolution->{Depth} eq '32' ? 24 : $resolution->{Depth} };	
-	$Screen->{Display} = [ map {
-	    { l => { Depth => { val => $_ }, $Mode_name => { val => $Mode } } };
-	} 8, 15, 16, 24 ];
-    }
-    add_gtf_ModeLines($raw_X, $resolution);
-}
-
-
-################################################################################
-# device #######################################################################
-################################################################################
-my @device_fields = qw(VendorName BoardName Driver VideoRam Screen BusID); #-);
-sub get_device {
-    my ($raw_X) = @_;
-    first(get_devices($raw_X));
-}
-sub get_devices {
-    my ($raw_X) = @_;
-    my @raw_devices = $raw_X->get_Sections('Device');
-    map {
-	my $raw_device = $_;
-	my $device = raw_export_section($raw_device, [ 'Identifier', @device_fields ]);
-	$device->{Options} = raw_export_section($raw_device, [ grep { (deref_array($raw_device->{$_}))[0]->{Option} } keys %$raw_device ]);
-	$device;
-    } @raw_devices;
-}
-sub set_devices {
-    my ($raw_X, @devices) = @_;
-    my @raw_devices = _new_device_sections($raw_X, int @devices);
-    mapn { 
-	my ($raw_device, $device) = @_;
-	my %Options  = %{$device->{Options} || {}};
-	raw_import_section($raw_device, $device, \@device_fields);
-	raw_import_section($raw_device, \%Options);
-	$_->{Option} = 1 foreach map { deref_array($raw_device->{$_}) } keys %Options;
-	$raw_device->{''} = [ { post_comment => $device->{raw_LINES} } ] if $device->{raw_LINES};
-    } \@raw_devices, \@devices;
-}
-sub _new_device_sections {
-    my ($raw_X, $nb_new) = @_;
-    $raw_X->remove_Section('Device');
-    map { $raw_X->add_Section('Device', { Identifier => { val => "device$_" }, DPMS => { Option => 1 } }) } (1 .. $nb_new);
-}
-sub get_Driver {
-    my ($raw_X) = @_;
-    my $card = eval { $raw_X->get_device };
-    $card && $card->{Driver};
-}
-
-################################################################################
-# wacoms #######################################################################
-################################################################################
-sub set_wacoms {
-    my ($raw_X, @wacoms) = @_;
-    $raw_X->remove_InputDevices('wacom');
-    
-    my $layout = get_ServerLayout($raw_X)->{InputDevice} ||= [];
-    @$layout = grep { $_->{val} !~ /^"(Stylus|Eraser|Cursor)/ } @$layout;
-    
-    @wacoms or return;
-    
-    my %Modes = (Stylus => 'Absolute', Eraser => 'Absolute', Cursor => 'Relative');
-    
-    each_index {
-	my $wacom = $_;
-	foreach (keys %Modes) {
-	    my $identifier = $_ . ($::i + 1);
-	    my $h = { Identifier => { val => $identifier }, 
-		      Driver => { val => 'wacom' },
-		      Type => { val => lc $_, Option => 1 },
-		      Device => { val => $wacom->{Device}, Option => 1 },
-		      Mode => { val => $Modes{$_}, Option => 1 },
-		      if_($wacom->{USB}, USB => { Option => 1 })
-		    };
-	    $raw_X->add_Section('InputDevice', $h);
-	    push @$layout, { val => qq("$identifier" "AlwaysCore") };
-	}
-    } @wacoms;
-}
-
-
-################################################################################
-# synaptics ####################################################################
-################################################################################
-sub set_synaptics {
-    my ($raw_X, @synaptics) = @_;
-    $raw_X->remove_InputDevices('synaptics');
-
-    my $layout = get_ServerLayout($raw_X)->{InputDevice} ||= [];
-    @$layout = grep { $_->{val} !~ /^"SynapticsMouse/ } @$layout;
-
-    @synaptics or return;
-    add_load_module($raw_X, "synaptics");
-
-    each_index {
-	my $synaptics_mouse = $_;
-        my $identifier = "SynapticsMouse" . ($::i + 1);
-        my $pointer_type = $synaptics_mouse->{Primary} ? "CorePointer" : "AlwaysCore";
-        my $h = {
-            Identifier => { val => $identifier },
-            Driver => { val => "synaptics" },
-        };
-        my %opts = (
-            Device => $synaptics_mouse->{Device},
-            Protocol => $synaptics_mouse->{Protocol},
-            $synaptics_mouse->{ALPS} ? (
-                #- from /usr/share/doc/synaptics-0.14.0/README.alps
-                #- and http://qa.mandrakesoft.com/show_bug.cgi?id=14512
-                LeftEdge => 120,
-                RightEdge => 830,
-                TopEdge => 120,
-                BottomEdge => 650,
-                FingerLow => 14,
-                FingerHigh => 15,
-                MaxTapTime => 180,
-                MaxTapMove => 110,
-                EmulateMidButtonTime => 75,
-                VertScrollDelta => 20,
-                HorizScrollDelta => 20,
-                MinSpeed => '0.8',
-                MaxSpeed => '1.00',
-                AccelFactor => '0.015',
-                EdgeMotionMinSpeed => 200,
-                EdgeMotionMaxSpeed => 200,
-                UpDownScrolling => 1,
-                CircularScrolling => 1,
-                CircScrollDelta => '0.1',
-                CircScrollTrigger => 2,
-                UpDownScrolling => 0,
-            ) : (
-                #- from /usr/share/doc/synaptics-0.14.0/INSTALL
-                LeftEdge => 1700,
-                RightEdge => 5300,
-                TopEdge => 1700,
-                BottomEdge => 4200,
-                FingerLow => 25,
-                FingerHigh => 30,
-                MaxTapTime => 180,
-                MaxTapMove => 220,
-                VertScrollDelta => 100,
-                MinSpeed => '0.09',
-                MaxSpeed => '0.18',
-                AccelFactor => '0.0015',
-            ),
-            SHMConfig => "on",
-        );
-        while (my ($k, $v) = each %opts) {
-            $h->{$k} = { val => $v, Option => 1 };
-        }
-        $raw_X->add_Section('InputDevice', $h);
-        push @$layout, { val => qq("$identifier" "$pointer_type") };
-    } @synaptics;
-}
-
-
-################################################################################
-# monitor ######################################################################
-################################################################################
-my @monitor_fields = qw(VendorName ModelName HorizSync VertRefresh);
-sub get_monitors {
-    my ($raw_X) = @_;
-    my @raw_monitors = $raw_X->get_Sections('Monitor');
-    map { 
-	my $h = raw_export_section($_, [ 'Identifier', @monitor_fields ]);
-	$h->{ModeLine} = $_->{ModeLine} if $_->{ModeLine};
-	$h;
-    } @raw_monitors;
-}
-sub set_monitors {
-    my ($raw_X, @monitors) = @_;
-    my @raw_monitors = _new_monitor_sections($raw_X, int @monitors);
-    mapn { 
-	my ($raw_monitor, $monitor) = @_;
-	raw_import_section($raw_monitor, $monitor, \@monitor_fields);
-	$raw_monitor->{ModeLine} = $monitor->{ModeLine} if $monitor->{ModeLine};
-    } \@raw_monitors, \@monitors;
-}
-sub get_or_new_monitors {
-    my ($raw_X, $nb_new) = @_;
-    my @monitors = $raw_X->get_monitors;
-
-    #- ensure we have exactly $nb_new monitors;
-    if ($nb_new > @monitors) {
-	@monitors, ({}) x ($nb_new - @monitors);
-    } else {
-	splice(@monitors, 0, $nb_new);
-    }
-}
-sub _new_monitor_sections {
-    my ($raw_X, $nb_new) = @_;
-    $raw_X->remove_Section('Monitor');
-    map { $raw_X->add_Section('Monitor', { Identifier => { val => "monitor$_" }, ModeLine => default_ModeLine() }) } (1 .. $nb_new);
-}
-sub default_ModeLine() {
-    ModeLine_from_string(qq(Section "Monitor"\n) . (our $default_ModeLine) . qq(EndSection\n));
-}
-
-sub add_gtf_ModeLines {
-    my ($raw_X, $resolution) = @_;
-
-    my $banner = 'modeline generated by gtf(1) [handled by XFdrake]';
-    my $res = $resolution->{X} . 'x' . $resolution->{Y};
-    my @to_add;
-    if ($res ne '1280x1024' && 
-	  ($res eq '1400x1050' || $res eq '1152x864' || $Xconfig::xfree::resolution2ratio{$res} ne '4/3')) {
-	@to_add = map {
-	    my $s = run_program::rooted_get_stdout($::prefix, 'gtf', $resolution->{X}, $resolution->{Y}, $_);
-	    if (my ($name, $val) = $s =~ /ModeLine\s*"(.*)"(.*)/i) {
-		chomp $val;
-		$name =~ s/\.00//;	#- nicer that way
-		{ val => qq("${name}"$val), pre_comment => "# $banner\n" };
-	    } else { () }
-	} reverse(sort_numbers(@Xconfig::xfree::vfreqs));
-    }
-
-    $raw_X->set_monitors(map {
-	@{$_->{ModeLine}} = (
-	    (grep { index($_->{pre_comment}, $banner) == -1 } @{$_->{ModeLine}}),
-	    @to_add,
-	);
-	$_;
-    } $raw_X->get_monitors);
-    
-    1;
-}
-
-
-################################################################################
-# screens ######################################################################
-################################################################################
-sub get_default_screen {
-    my ($raw_X) = @_;
-    my @l = $raw_X->get_Sections('Screen');
-    (find { $_->{Identifier} && val($_->{Identifier}) eq 'screen1' || 
-	      $_->{Driver} && val($_->{Driver}) =~ /svga|accel/ } @l) || $l[0];
-}
-sub set_screens {
-    my ($raw_X, @screens) = @_;
-    my @raw_screens = _new_screen_sections($raw_X, int @screens);
-    mapn { 
-	my ($raw_screen, $screen) = @_;
-	raw_import_section($raw_screen, $screen);
-    } \@raw_screens, \@screens;
-}
-sub _new_screen_sections {
-    my ($raw_X, $nb_new) = @_;
-    $raw_X->remove_Section('Screen');
-    my @l = map { $raw_X->add_Section('Screen', { Identifier => { val => "screen$_" } }) } (1 .. $nb_new);
-
-    get_ServerLayout($raw_X)->{Screen} = [ 
-	{ val => qq("screen1") },
-	map { { val => sprintf('"screen%d" RightOf "screen%d"', $_, $_ - 1) } } (2 .. $nb_new)
-    ];
-    @l;
-}
-sub is_fbdev {
-    my ($raw_X, $o_Screen) = @_;
-
-    my $Screen = $o_Screen || $raw_X->get_default_screen or return;
-
-    my $Device = $raw_X->get_Section_by_Identifier('Device', val($Screen->{Device})) or internal_error("no device named $Screen->{Device}");
-    val($Device->{Driver}) eq 'fbdev';
-}
-
-
-
-
-################################################################################
-# modules ######################################################################
-################################################################################
-sub get_modules {
-    my ($raw_X) = @_;
-    my $raw_Module = $raw_X->get_Section('Module') or return;
-    my $Module = raw_export_section($raw_Module, ['Load']);
-    @{$Module->{Load} || []};
-}
-sub add_load_module {
-    my ($raw_X, $module) = @_;
-    my $raw_Module = $raw_X->get_Section('Module') || $raw_X->add_Section('Module', {});
-
-    my %load_modules_comment = (
-	dbe => 'Double-Buffering Extension',
-	v4l => 'Video for Linux',
-	dri => 'direct rendering',
-	glx => '3D layer',
-	'glx-3.so' => '3D layer',
-    );
-    my $comment = $load_modules_comment{$module};
-    push @{$raw_Module->{Load}}, { val => $module,
-				   comment_on_line => $comment && " # $comment",
-				 } if !member($module, $raw_X->get_modules);
-}
-sub remove_load_module {
-    my ($raw_X, $module) = @_;
-    my $raw_Module = $raw_X->get_Section('Module') or return;
-    if (my @l = grep { $_->{val} ne $module } @{$raw_Module->{Load}}) {
-	$raw_Module->{Load} = \@l;
-    } else {
-	$raw_X->remove_Section('Module');
-    }
-}
-sub set_load_module {
-    my ($raw_X, $module, $bool) = @_;
-    $bool ? add_load_module($raw_X, $module) : remove_load_module($raw_X, $module);
-}
-
-
-#-##############################################################################
-#- helpers
-#-##############################################################################
-sub _set_Option {
-    my ($category, $node, @names) = @_;
-    
-    if (member($category, 'keyboard', 'mouse')) {
-	#- everything we export is an Option
-	$_->{Option} = 1 foreach map { deref_array($node->{$_}) } @names;
-    }
-}
-
-sub get_InputDevices {
-    my ($raw_X, $Driver) = @_;
-    $raw_X->get_Sections('InputDevice', sub { val($_[0]{Driver}) eq $Driver });
-}
-sub remove_InputDevices {    
-    my ($raw_X, $Driver) = @_;
-    $raw_X->remove_Section('InputDevice', sub { val($_[0]{Driver}) ne $Driver });
-}
-
-sub get_ServerLayout {
-    my ($raw_X) = @_;
-    $raw_X->get_Section('ServerLayout') ||
-      $raw_X->add_Section('ServerLayout', { Identifier => { val => 'layout1' } });
-}
-
-#-##############################################################################
-#- helpers
-#-##############################################################################
-sub raw_export_section {
-    my ($section, $fields) = @_;
-
-    my $export_name = sub {
-	my ($name) = @_;
-	my $h = $section->{$name} or return;
-
-	my @l = map { if_(!$_->{commented}, $_->{val}) } deref_array($h) or return;    
-	$name => (ref($h) eq 'ARRAY' ? \@l : $l[0]);
-    };
-
-    my %h = map { $export_name->($_) } @$fields;
-    \%h;
-}
-
-sub raw_import_section {
-    my ($section, $h, $o_fields) = @_;
-    foreach ($o_fields ? grep { exists $h->{$_} } @$o_fields : keys %$h) {
-	my @l = map { ref($_) eq 'HASH' ? $_ : { val => $_ } } deref_array($h->{$_});
-	$section->{$_} = (ref($h->{$_}) eq 'ARRAY' ? \@l : $l[0]);
-    }
-}
-
-sub add_Section {
-    my ($raw_X, $Section, $h) = @_;
-    my @suggested_ordering = qw(Files ServerFlags Module DRI Keyboard Pointer XInput InputDevice Monitor Device Screen ServerLayout);
-    my %order = map_index { { lc($_) => $::i } } @suggested_ordering;
-    my $e = { name => $Section, l => $h };
-    my $added;
-    @$raw_X = map { 
-	if ($order{lc $_->{name}} > $order{lc $Section} && !$added) {
-	    $added = 1;
-	    ($e, $_);
-	} else { $_ }
-    } @$raw_X;
-    push @$raw_X, $e if !$added;
-    $h;
-}
-sub remove_Section {
-    my ($raw_X, $Section, $o_when) = @_;
-    @$raw_X = grep { $_->{name} ne $Section || $o_when && $o_when->($_->{l}) } @$raw_X;
-    $raw_X;
-}
-sub get_Sections {
-    my ($raw_X, $Section, $o_when) = @_;
-    map { if_(lc($_->{name}) eq lc($Section) && (!$o_when || $o_when->($_->{l})), $_->{l}) } @$raw_X;
-}
-sub get_Section {
-    my ($raw_X, $Section, $o_when) = @_;
-    my @l = get_Sections($raw_X, $Section, $o_when);
-    @l > 1 and log::l("Xconfig: found more than one Section $Section");
-    $l[0];
-}
-sub get_Section_by_Identifier {
-    my ($raw_X, $Section, $Identifier) = @_;
-    my @l = get_Sections($raw_X, $Section, sub { val($_[0]{Identifier}) eq $Identifier });
-    @l > 1 and die "more than one Section $Section has Identifier $Identifier";
-    $l[0];
-}
-
-sub val {
-    my ($ref) = @_;
-    $ref && $ref->{val};
-}
-
-
-sub ModeLine_from_string {
-    my ($s) = @_;
-    my $raw_X_for_ModeLine = Xconfig::parse::read_XF86Config_from_string($s);
-    get_Section($raw_X_for_ModeLine, 'Monitor')->{ModeLine};
-}
-
-
-
-# http://home.comcast.net/~igpl/Aspect.html
-# movies http://www.technosound.co.uk/nav.php?pageid=hcg_widescreen
-# esp for 1360x768 http://www.winischhofer.at/linuxsispart1.shtml
-
-# www.dell.com/downloads/global/vectors/2003_cvt.pdf
-# file vesamodes in Xorg is DMT Standard Display Modes
-
-# http://www.vesa.org/Public
-# http://www.vesa.org/Public/EEDIDguideV1.pdf 
-
-#- http://www.vesa.org/Public/CVT
-our @CVT_ratios = qw(4/3 16/9 16/10 5/4 15/9 3/2);
-our @CVT_vfreqs = qw(50 60 75 85); # and also 60Hz "reduced blanking" in CVT
-
-our @vfreqs = (@CVT_vfreqs, qw(100 120));
-
-our %ratio2resolutions = (
-
-    # first all the CVT_ratios
-
-    # 1.25
-    '5/4' => [ qw(640x512 720x576 1280x1024 1800x1440) ],
-		# SXGA=1280x1024 QSXGA=2560x2048
-
-    # 1.33
-    '4/3' => [
-	qw(320x240 480x360 640x480 800x600 832x624 
-	   1024x768 1152x864 1280x960 1400x1050 
-	   1600x1200 1920x1440 2048x1536), # 768x576 1792x1344 1856x1392
-	    # DBLSCAN: 400x300 416x312 512x384 576x432 700x525 896x672 928x696 960x720
-    ],		# VGA=640x480, SVGA=800x600, XGA=1024x768, SXGA+=1400x1050, UXGA=1600x1200, QXGA=2048x1536 QSXGA+=2800x2100, QUXGA=3200x2400
-
-    # 1.5
-    '3/2' => [ qw(360x240 720x480 1152x768) ], # 576x384 (DBLSCAN of 1152x768)
-
-    # 1.6
-    '16/10' => [ qw(1280x800 1440x900 1600x1000 1680x1050 1920x1200) ], # 320x200 640x400 960x600 2560x1600
-                # WSXGA+=1680x1050, WUXGA=1920x1200, WQUXGA=3840x2400
-
-    # 1.67
-    '15/9' => [ qw(1280x768) ], # 800x480
-		# WXGA=1280x768 or ??? (should be 1366x768)
-    
-    # 1.78
-    '16/9' => [ qw(1280x720 1600x900 1920x1080) ], # 960x540 1024x576
-
-
-    # now more weird things
-
-    # 1.32
-    # '192/145' => [ qw(1152x870) ],
-
-    # 1.328
-    # '85/64' => [ qw(1360x1024) ],
-
-    # 1.42
-    # '17/12' => [ qw(544x384) ] ,
-
-    # 1.56
-    # '25/16' => [ qw(1600x1024) ], # WSXGA, (DBLSCAN 800x512)
-
-    # 1.707
-    # '128/75' => [ qw(1024x600) ],
-
-    # 1.767
-    # '53/30' => [ qw(848x480) ],
-
-    # 1.771
-    # '85/48' => [ qw(1360x768) ],
-
-    # 1.775
-    # '71/40' => [ qw(852x480) ],
-
-    # 1.783
-    # '107/60' => [ qw(856x480) ],
-
-    N_("_:weird aspect ratio\nother") => [
-	# 2.13 = 32/15
-	qw(1024x480 1280x600), # VAIO
-
-	# 2.67 = 8/3
-	qw(2048x768 2560x960 3200x1200),
-
-	# 4.0 = 4/1
-	qw(3072x768 3456x864 3840x960 4800x1200),
-
-	# ?? 352x288 640x350 (DBLSCAN 320x175) 720x400 (DBLSCAN 360x200)
-    ],
-);
-
-our %resolution2ratio = map_each { map { $_ => $::a } @$::b } %ratio2resolutions;
-our @resolutions = map_each { @$::b } %ratio2resolutions;
-
-foreach my $ratio (keys %ratio2resolutions) {
-    if ($ratio =~ m!^(\d+)/(\d+)$!) {
-	my $eval = $2 / $1;
-	foreach (@{$ratio2resolutions{$ratio}}) {
-	    my ($x, $y) = /(\d+)x(\d+)/;
-	    my $y2 = round($x * $eval);
-	    $y == $y2 or do {
-		my $good_ratio = (find { m!^(\d+)/(\d+)$! && $y == round($x * $2 / $1) } keys %ratio2resolutions) || '??';
-		die "bad ratio $ratio for resolution $_, it should be $good_ratio\n";
-	    };
-	}
-    }
-}
-
-our $default_header = <<'END';
-# File generated by XFdrake.
-
-# **********************************************************************
-# Refer to the xorg.conf man page for details about the format of
-# this file.
-# **********************************************************************
-
-Section "Files"
-    # Multiple FontPath entries are allowed (they are concatenated together)
-    # By default, Mandrake 6.0 and later now use a font server independent of
-    # the X server to render fonts.
-    FontPath "unix/:-1"
-EndSection
-
-Section "ServerFlags"
-    #DontZap # disable <Crtl><Alt><BS> (server abort)
-    #DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
-    AllowMouseOpenFail # allows the server to start up even if the mouse does not work
-END
-
-require detect_devices;
-$default_header .= <<'END_XBOX' if detect_devices::is_xbox();
-    Option "PciProbe1" "false"
-    Option "PciProbe2" "false"
-    Option "PciForceConfig1" "false"
-    Option "PciForceConfig2" "false"
-    Option "PciOsConfig" "true"
-END_XBOX
-
-$default_header .= <<'END';
-EndSection
-END
-
-our $default_ModeLine = arch() =~ /ppc/ ? <<'END_PPC' : <<'END';
-    # Apple iMac modes
-    ModeLine "1024x768"   78.525 1024 1049 1145 1312   768  769  772  800 +hsync +vsync
-    ModeLine "800x600"    62.357  800  821  901 1040   600  601  604  632 +hsync +vsync
-    ModeLine "640x480"    49.886  640  661  725  832   480  481  484  514 +hsync +vsync
-    # Apple monitors tend to do 832x624
-    ModeLine "832x624"    57      832  876  940 1152   624  625  628  667 -hsync -vsync
-    # Apple PowerBook G3
-    ModeLine "800x600"    100     800  816  824  840   600  616  624  640 -hsync -vsync
-    # Apple TI Powerbook 
-    ModeLine "1152x768"   78.741 1152 1173 1269 1440   768  769  772  800 +vsync +vsync
-    # Pismo Firewire G3   
-    ModeLine "1024x768"   65     1024 1032 1176 1344   768  771  777  806 -hsync -vsync
-    # iBook2
-    ModeLine "1024x768"   65     1024 1048 1184 1344   768  771  777  806 -hsync -vsync
-    # 17" Apple Studio Display
-    ModeLine "1024x768"   112.62 1024 1076 1248 1420 768 768 780 808 +hsync +vsync
-    # HiRes Apple Studio Display
-    ModeLine "1280x1024"  135    1280 1288 1392 1664  1024 1027 1030 1064
-    # Another variation
-    ModeLine "1280x1024"  134.989 1280 1317 1429 1688  1024 1025 1028 1066 +hsync +vsync
-END_PPC
-    # TV fullscreen mode or DVD fullscreen output.
-    # 768x576 @ 79 Hz, 50 kHz hsync
-    ModeLine "768x576"     50.00  768  832  846 1000   576  590  595  630
-    # 768x576 @ 100 Hz, 61.6 kHz hsync
-    ModeLine "768x576"     63.07  768  800  960 1024   576  578  590  616
-END
-
-1;