summaryrefslogtreecommitdiffstats
path: root/examples
diff options
context:
space:
mode:
Diffstat (limited to 'examples')
-rwxr-xr-xexamples/dracut/mgalive-parse.sh31
-rwxr-xr-xexamples/dracut/mgalive-root.sh84
-rw-r--r--examples/gui/config/build.cfg4
-rw-r--r--examples/minimal/config/build.cfg4
-rw-r--r--examples/xfce/config/build.cfg4
5 files changed, 0 insertions, 127 deletions
diff --git a/examples/dracut/mgalive-parse.sh b/examples/dracut/mgalive-parse.sh
deleted file mode 100755
index c5225ba..0000000
--- a/examples/dracut/mgalive-parse.sh
+++ /dev/null
@@ -1,31 +0,0 @@
-#!/bin/sh
-# live images are specified with
-# root=mgalive:backingdev
-
-[ -z "$root" ] && root=$(getarg root=)
-
-if [ "${root%%:*}" = "mgalive" ] ; then
- liveroot=$root
-fi
-
-[ "${liveroot%%:*}" = "mgalive" ] || return
-
-modprobe -q loop
-
-case "$liveroot" in
- mgalive:LABEL=*|LABEL=*) \
- root="${root#mgalive:}"
- root="$(echo $root | sed 's,/,\\x2f,g')"
- root="mgalive:/dev/disk/by-label/${root#LABEL=}"
- rootok=1 ;;
- mgalive:UUID=*|UUID=*) \
- root="${root#mgalive:}"
- root="mgalive:/dev/disk/by-uuid/${root#UUID=}"
- rootok=1 ;;
-esac
-info "root was $liveroot, is now $root"
-
-# make sure that init doesn't complain
-[ -z "$root" ] && root="mgalive"
-
-wait_for_dev /live/union
diff --git a/examples/dracut/mgalive-root.sh b/examples/dracut/mgalive-root.sh
deleted file mode 100755
index a8fee5c..0000000
--- a/examples/dracut/mgalive-root.sh
+++ /dev/null
@@ -1,84 +0,0 @@
-#!/bin/sh
-
-. /lib/dracut-lib.sh
-
-[ -f /tmp/root.info ] && . /tmp/root.info
-
-PATH=/usr/sbin:/usr/bin:/sbin:/bin
-
-[ -z "$1" ] && exit 1
-livedev="$1"
-
-# Create the live tree
-mkdir -m 0755 -p /live/distrib
-mkdir -m 0755 -p /live/media
-mkdir -m 0755 -p /live/overlay
-mkdir -m 0755 -p /live/union
-mkdir -m 0755 -p /run/mgalive/ovlsize
-
-# Get the base device name
-basedev=$(echo $livedev | sed 's,\(/dev/sd[a-z]\)1,\1,g')
-
-# Get the base directory for locating the loopback file. In normal use this is
-# the root directory, but a multi-boot USB stick may want to override this.
-basedir=$(getarg mgalive.basedir)
-if [ -z "$basedir" ] ; then
- basedir="/"
-fi
-
-# Get the device or path used for persistant storage (if it exists). In normal
-# use this is another partition on the same base device, but a multi-boot USB
-# stick may want to override this.
-overlay=$(getarg mgalive.overlay)
-if [ -z "$overlay" ] ; then
- overlay=`blkid -t LABEL=Mageia-Persist -o device | grep $basedev`
-else
- overlay=$livedev$overlay
-fi
-
-if [ "$basedir" = "/" -a -z "$overlay" ] ; then
- # Fix udev isohybrid LABEL issues (mga #3334)
- # (things have moved on - this may not be needed now)
- media=$basedev
-else
- media=$livedev
-fi
-
-info "mgalive basedev is $basedev"
-info "mgalive livedev is $livedev"
-info "mgalive basedir is $basedir"
-info "mgalive overlay is $overlay"
-
-# Mount the live media
-mount -n -o ro $media /live/media
-
-# Mount the loopback filesystem
-LOOPDEV=$( losetup -f )
-if [ -e /live/media$basedir/loopbacks/distrib-lzma.sqfs ] ; then
- # Retain support for original draklive. Note that despite the file
- # name, it too uses xz compression.
- losetup -r $LOOPDEV /live/media$basedir/loopbacks/distrib-lzma.sqfs
-else
- losetup -r $LOOPDEV /live/media$basedir/loopbacks/distrib.sqfs
-fi
-mount -n -t squashfs -o ro $LOOPDEV /live/distrib
-mount -n -t squashfs -o ro $LOOPDEV /run/mgalive/ovlsize
-
-# Mount the overlay filesystem
-if [ -z "$overlay" ] ; then
- mount -n -t tmpfs -o mode=755 none /live/overlay
-else
- mount -n -o noatime $overlay /live/overlay
-fi
-# work and memory must be on same root
-mkdir -m 0755 -p /live/overlay/work
-mkdir -m 0755 -p /live/overlay/memory
-mount -n -t overlay overlay -o lowerdir=/live/distrib,upperdir=/live/overlay/memory,workdir=/live/overlay/work,noatime /live/union
-
-ln -s /live/union /dev/root
-
-printf '/bin/mount --rbind /live/union %s\n' "$NEWROOT" > $hookdir/mount/01-$$-live.sh
-
-need_shutdown
-
-exit 0
diff --git a/examples/gui/config/build.cfg b/examples/gui/config/build.cfg
index 83f2e8a..c235c1f 100644
--- a/examples/gui/config/build.cfg
+++ b/examples/gui/config/build.cfg
@@ -122,10 +122,6 @@ my $config = {
# Fix for sometimes wrong permissions after install.
[ 'files/draklive-install.d/run.d/home-live-permissions.sh', '/etc/draklive-install.d/run.d/home-live-permissions.sh', { mode => 755 } ],
-
- # Support for persistence and multi-boot USB.
- # (move to the dracut package if it works)
- [ '../dracut/*', '/usr/lib/dracut/modules.d/90mgalive/', { mode => 0755 } ],
],
remove_files => [
(map { "/etc/modprobe.preload.d/$_" } qw(cpufreq pcmcia rfswitch)),
diff --git a/examples/minimal/config/build.cfg b/examples/minimal/config/build.cfg
index b509b98..0149e44 100644
--- a/examples/minimal/config/build.cfg
+++ b/examples/minimal/config/build.cfg
@@ -122,10 +122,6 @@ my $config = {
# Eject medium before live system halt/reboot.
[ 'files/halt-local.service', '/etc/systemd/system/halt-local.service', { mode => 0644, no_install => 1 } ],
[ 'files/halt.local', '/sbin/halt.local', { mode => 0755, no_install => 1 } ],
-
- # Support for persistence and multi-boot USB.
- # (move to the dracut package if it works)
- [ '../dracut/*', '/usr/lib/dracut/modules.d/90mgalive/', { mode => 0755 } ],
],
remove_files => [
(map { "/etc/modprobe.preload.d/$_" } qw(cpufreq pcmcia rfswitch)),
diff --git a/examples/xfce/config/build.cfg b/examples/xfce/config/build.cfg
index 3e22d76..e09def5 100644
--- a/examples/xfce/config/build.cfg
+++ b/examples/xfce/config/build.cfg
@@ -174,10 +174,6 @@ my $config = {
# Fix for sometimes wrong permissions after install.
[ 'files/draklive-install.d/run.d/home-live-permissions.sh', '/etc/draklive-install.d/run.d/home-live-permissions.sh', { mode => 755 } ],
-
- # Support for persistence and multi-boot USB.
- # (move to the dracut package if it works)
- [ '../dracut/*', '/usr/lib/dracut/modules.d/90mgalive/', { mode => 0755 } ],
],
remove_files => [
(map { "/etc/modprobe.preload.d/$_" } qw(cpufreq pcmcia rfswitch)),