Update MSEC translation catalog

1 files changed, 243 insertions, 196 deletions

diff --git a/po/zh_TW.po b/po/zh_TW.po
index 25c1fc3..e80645c 100644
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -19,10 +19,11 @@ msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2010-04-30 09:51+BRT\n"
+"POT-Creation-Date: 2013-06-13 07:42+EEST\n"
 "PO-Revision-Date: 2008-10-18 00:45+0800\n"
 "Last-Translator: You-Cheng Hsieh <yochenhsieh@gmail.com>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
+"Language: \n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
@@ -38,7 +39,7 @@ msgstr "變更的系統檔案"
 msgid "No changes in system files"
 msgstr "系統檔案無變更"
 
-#: ../src/msec/config.py:60
+#: ../src/msec/config.py:60 ../src/msec/tools.py:36
 msgid "Disabled"
 msgstr "已停用"
 
@@ -77,170 +78,178 @@ msgid "Enable checking for files/directories writable by everybody."
 msgstr "檢查可以被任何人寫入的檔案/目錄"
 
 #: ../src/msec/help.py:18
+msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
+msgstr "啟用檢查 /etc/shadow 內的空白密碼 (man shadow(5))。"
+
+#: ../src/msec/help.py:20
 msgid "Log syslog messages on console terminal 12."
 msgstr "記錄 syslog 訊息於 12 號終端機。"
 
-#: ../src/msec/help.py:20
+#: ../src/msec/help.py:22
 msgid "Send mail reports even if no changes were detected."
 msgstr "即使未改變，也寄送報表"
 
-#: ../src/msec/help.py:22
+#: ../src/msec/help.py:24
 msgid ""
 "Defines the base security level, on top of which the current configuration "
 "is based."
 msgstr ""
 
-#: ../src/msec/help.py:24
+#: ../src/msec/help.py:26
 msgid "Accept broadcasted ICMP echo."
 msgstr "接受廣播的 ICMP 回應。"
 
-#: ../src/msec/help.py:26
+#: ../src/msec/help.py:28
 msgid ""
 "Enable verification for changes in the installed RPM packages. This will "
 "notify you when new packages are installed or removed."
 msgstr ""
 
-#: ../src/msec/help.py:28
+#: ../src/msec/help.py:30
 msgid "Enable periodic permission checking for files specified in msec policy."
 msgstr "依照 msec 規則啟用定期檢查系統檔案權限。"
 
-#: ../src/msec/help.py:30
+#: ../src/msec/help.py:32
 #, fuzzy
 msgid "Ignore changes in process IDs when checking for open network ports."
 msgstr "啟用開放網路埠檢查"
 
-#: ../src/msec/help.py:32
+#: ../src/msec/help.py:34
 msgid "Allow X server to accept connections from network on tcp port 6000."
 msgstr "允許X伺服器接受TCP 6000埠連線"
 
-#: ../src/msec/help.py:34
+#: ../src/msec/help.py:36
 msgid "Enable checking for known rootkits using chkrootkit."
 msgstr "啟用chkrootkit 檢查已知的rootkit"
 
-#: ../src/msec/help.py:36
+#: ../src/msec/help.py:38
 msgid ""
 "Enable msec to enforce file permissions to the values specified in the msec "
 "security policy."
 msgstr ""
 
-#: ../src/msec/help.py:38
+#: ../src/msec/help.py:40
 msgid ""
 "Enable sectools checks. This check will run all sectool checks for a "
 "security level configuration. The security level to be used during this test "
 "is determined by the CHECK_SECTOOL_LEVELS variable."
 msgstr ""
 
-#: ../src/msec/help.py:40
+#: ../src/msec/help.py:42
 msgid "Set shell commands history size. A value of -1 means unlimited."
 msgstr "設定 shell 命令歷史記錄的大小。-1 代表沒有限制。"
 
-#: ../src/msec/help.py:42
+#: ../src/msec/help.py:44
 msgid "Allow system reboot and shutdown to local users."
 msgstr "允許主機端使用者重新開機/關機。"
 
-#: ../src/msec/help.py:44
+#: ../src/msec/help.py:46
 msgid "Enable checking for changes in firewall settings."
 msgstr "啟用防火牆設定變更檢查"
 
-#: ../src/msec/help.py:46
+#: ../src/msec/help.py:48
 msgid "Enable checking for additions/removals of suid root files."
 msgstr "檢查 suid root 檔案的新增/移除"
 
-#: ../src/msec/help.py:48
-msgid "Enables logging of periodic checks to system log."
-msgstr "開啟將定期檢查的結果紀錄到系統紀錄中。"
-
 #: ../src/msec/help.py:50
+msgid "Include current directory into user PATH by default"
+msgstr "預設將目前的目錄加入到使用者的路徑 (PATH) 中"
+
+#: ../src/msec/help.py:52
 msgid ""
 "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /"
 "etc/at.allow (see man at(1) and crontab(1))."
 msgstr ""
 
-#: ../src/msec/help.py:52
-msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
-msgstr "啟用使用者.rhosts/.shosts 檔案危險項目檢查。"
-
 #: ../src/msec/help.py:54
+msgid "Set the shell timeout. A value of zero means no timeout."
+msgstr "設定 shell 逾時時間。0 代表永不逾時。"
+
+#: ../src/msec/help.py:56
 msgid ""
 "Enable password-related checks, such as empty passwords and strange super-"
 "user accounts."
 msgstr "啟用密碼相關檢查，如空白密碼和奇怪的超級用戶帳戶。"
 
-#: ../src/msec/help.py:56
+#: ../src/msec/help.py:58
 msgid ""
 "Set the password history length to prevent password reuse. This is not "
 "supported by pam_tcb."
 msgstr "設定密碼記錄的長度以防止重複使用密碼。這不被 pam_tcb 支援。"
 
-#: ../src/msec/help.py:58
-msgid "Enable checksum verification for suid files."
-msgstr "啟用 suid 檔案的 checksum 認證。"
-
 #: ../src/msec/help.py:60
-msgid ""
-"Use secure location for temporary files. If this parameter is set to 'yes', "
-"user home directory will be used for temporary files. Otherwise, /tmp will "
-"be used."
-msgstr ""
+msgid "Set the user umask."
+msgstr "設定使用者的 umask。"
 
 #: ../src/msec/help.py:62
-msgid "User email to receive security notifications."
-msgstr "使用者用來接收安全性訊息的電子郵件信箱位址。"
+msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
+msgstr "啟用使用者.rhosts/.shosts 檔案危險項目檢查。"
 
 #: ../src/msec/help.py:64
-msgid "Set the user umask."
-msgstr "設定使用者的 umask。"
+msgid "User email to receive security notifications."
+msgstr "使用者用來接收安全性訊息的電子郵件信箱位址。"
 
 #: ../src/msec/help.py:66
-msgid "Allow only users in wheel group to su to root."
-msgstr "只允許 wheel 群組的使用者用 su 轉換成管理者。"
+msgid "Allow autologin."
+msgstr "允許自動登入。"
 
 #: ../src/msec/help.py:68
-msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
-msgstr "啟用檢查 /etc/shadow 內的空白密碼 (man shadow(5))。"
+msgid "Allow only users in wheel group to su to root."
+msgstr "只允許 wheel 群組的使用者用 su 轉換成管理者。"
 
 #: ../src/msec/help.py:70
-msgid "Allow autologin."
-msgstr "允許自動登入。"
+msgid "Enable daily security checks."
+msgstr "執行每日安全檢查。"
 
 #: ../src/msec/help.py:72
+msgid ""
+"Use secure location for temporary files. If this parameter is set to 'yes', "
+"user home directory will be used for temporary files. Otherwise, /tmp will "
+"be used."
+msgstr ""
+
+#: ../src/msec/help.py:74
+msgid "Allow direct root login on terminal."
+msgstr "允許 root 直接於終端機登入。"
+
+#: ../src/msec/help.py:76
 msgid "Enable checking for changes in system users."
 msgstr "檢查系統使用者的變動。"
 
-#: ../src/msec/help.py:74
+#: ../src/msec/help.py:78
 msgid "Enable checking for unowned files."
 msgstr "檢查不屬於任何人的檔案。"
 
-#: ../src/msec/help.py:76
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr "設定 shell 逾時時間。0 代表永不逾時。"
+#: ../src/msec/help.py:80
+msgid "Enable IP spoofing protection."
+msgstr "啟用IP欺騙保護。"
 
-#: ../src/msec/help.py:78
+#: ../src/msec/help.py:82
 msgid "Allow display managers (kdm and gdm) to display list of local users."
 msgstr "允許登入管理員(kdm 與 gdm)將本地使用者進行列表顯示。"
 
-#: ../src/msec/help.py:80
+#: ../src/msec/help.py:84
 msgid "Enable name resolution spoofing protection."
 msgstr "啟用名稱解析偽造保護"
 
-#: ../src/msec/help.py:82
+#: ../src/msec/help.py:86
 msgid ""
 "Enforce MSEC file directory permissions on system startup. If this parameter "
 "is set to 'enforce', system permissions will be enforced automatically, "
 "according to system security settings."
 msgstr ""
 
-#: ../src/msec/help.py:84
-msgid "Include current directory into user PATH by default"
-msgstr "預設將目前的目錄加入到使用者的路徑 (PATH) 中"
+#: ../src/msec/help.py:88
+msgid "Enables logging of periodic checks to system log."
+msgstr "開啟將定期檢查的結果紀錄到系統紀錄中。"
 
-#: ../src/msec/help.py:86
+#: ../src/msec/help.py:90
 msgid ""
 "Enable permission checking on users' files that should not be owned by "
 "someone else, or writable."
 msgstr ""
 
-#: ../src/msec/help.py:88
+#: ../src/msec/help.py:92
 msgid ""
 "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/"
 "server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --"
@@ -251,17 +260,17 @@ msgid ""
 "manually into the server.SERVER_LEVEL files when necessary."
 msgstr ""
 
-#: ../src/msec/help.py:90
+#: ../src/msec/help.py:94
 msgid ""
 "Use password to authenticate users. Take EXTREME care when disabling "
 "passwords, as it will leave the machine vulnerable."
 msgstr ""
 
-#: ../src/msec/help.py:92
-msgid "Show security notifications in system tray using libnotify."
-msgstr "使用 libnotify 在系統列顯示安全性通知。"
+#: ../src/msec/help.py:96
+msgid "Enable checking for changes in system groups."
+msgstr "檢查系統群組的變動。"
 
-#: ../src/msec/help.py:94
+#: ../src/msec/help.py:98
 msgid ""
 "Set umask option for mounting vfat and ntfs partitions. If umask is '-1', "
 "default system umask is used."
@@ -269,34 +278,34 @@ msgstr ""
 "設定掛載 vfat 或 ntfs 磁區時所用的 umask 選項。如果 umask 是 '-1'，將套用預設"
 "的系統 umask。"
 
-#: ../src/msec/help.py:96
+#: ../src/msec/help.py:100
+msgid "Show security notifications in system tray using libnotify."
+msgstr "使用 libnotify 在系統列顯示安全性通知。"
+
+#: ../src/msec/help.py:102
 msgid "Enable checking for open network ports."
 msgstr "啟用開放網路埠檢查"
 
-#: ../src/msec/help.py:98
-msgid "Allow direct root login on terminal."
-msgstr "允許 root 直接於終端機登入。"
-
-#: ../src/msec/help.py:100
+#: ../src/msec/help.py:104
 msgid "Run security checks when machine is running on battery power."
 msgstr "當電腦使用電池電力時執行安全性檢查。"
 
-#: ../src/msec/help.py:102
-msgid "Enable checking for changes in system groups."
-msgstr "檢查系統群組的變動。"
+#: ../src/msec/help.py:106
+msgid "Perform hourly security check for changes in system configuration."
+msgstr "每小時進行系統設定變動的安全性檢查。"
 
-#: ../src/msec/help.py:104
+#: ../src/msec/help.py:108
 msgid ""
 "Allow remote root login via sshd. If yes, login is allowed. If without-"
-"password, only public-key authentication logins are allowed. See sshd_config"
-"(5) man page for more information."
+"password, only public-key authentication logins are allowed. See "
+"sshd_config(5) man page for more information."
 msgstr ""
 
-#: ../src/msec/help.py:106
+#: ../src/msec/help.py:110
 msgid "Enable logging of strange network packets."
 msgstr "啟用紀錄異常的網路封包。"
 
-#: ../src/msec/help.py:108
+#: ../src/msec/help.py:112
 msgid ""
 "Define the default retention period for logs, in weeks. Some countries "
 "require that the log files should be kept for 12 months, other do not have "
@@ -304,56 +313,54 @@ msgid ""
 "that should be kept by logrotate on the system."
 msgstr ""
 
-#: ../src/msec/help.py:110
+#: ../src/msec/help.py:114
 msgid "Ask for root password when going to single user level (man sulogin(8))."
 msgstr "進入單人模式時，詢問 root 密碼(man sulogin(8))。"
 
-#: ../src/msec/help.py:112
-msgid "Enable IP spoofing protection."
-msgstr "啟用IP欺騙保護。"
-
-#: ../src/msec/help.py:114
+#: ../src/msec/help.py:116
 msgid "Allow root access without password for the members of the wheel group."
 msgstr "允許 wheel 群組使用者不需密碼即可取得 root 權限。"
 
-#: ../src/msec/help.py:116
+#: ../src/msec/help.py:118
 msgid "Fix owner and group of unowned files to use nobody/nogroup."
 msgstr "修正無主檔案的擁有者及群組為 nobody/nogroup。"
 
-#: ../src/msec/help.py:118
+#: ../src/msec/help.py:120
 msgid "Send security check results by email."
 msgstr "以郵件回報檢查結果"
 
-#: ../src/msec/help.py:120
+#: ../src/msec/help.py:122
 #, fuzzy
 msgid ""
 "Allow to export display when passing from the root account to the other "
 "users. See pam_xauth(8) for more details."
 msgstr "當由 root 傳遞到其他使用者時，匯出顯示"
 
-#: ../src/msec/help.py:122
+#: ../src/msec/help.py:124
 msgid ""
-"Defines the sectool level to use during the periodic security check. You may "
-"use the sectool-gui application to select individual tests for each level. "
-"If this variable is not defined, the default level defined in sectool "
-"configuration will be used."
+"Allow users in wheel group to use sudo. If this option is set to 'yes', the "
+"users in wheel group are allowed to use sudo and run commands as root by "
+"using their passwords. If this option to set to 'without-password', the "
+"users can use sudo without being asked for their password. WARNING: using "
+"sudo without any password makes your system very vulnerable, and you should "
+"only use this setting if you know what you are doing!"
 msgstr ""
 
-#: ../src/msec/help.py:124
-msgid "Enable daily security checks."
-msgstr "執行每日安全檢查。"
-
 #: ../src/msec/help.py:126
+msgid "Enable checksum verification for suid files."
+msgstr "啟用 suid 檔案的 checksum 認證。"
+
+#: ../src/msec/help.py:128
 msgid "Accept ICMP echo."
 msgstr "接受 ICMP 回應。"
 
-#: ../src/msec/help.py:128
+#: ../src/msec/help.py:130
 msgid ""
 "Set the password minimum length and minimum number of digit and minimum "
 "number of capitalized letters, using length,ndigits,nupper format."
 msgstr "設定密碼的最小長度、最少的數字數及大寫字母數。"
 
-#: ../src/msec/help.py:130
+#: ../src/msec/help.py:132
 msgid ""
 "Allow full access to network services controlled by tcp_wrapper (see hosts."
 "deny(5)). If yes, all services are allowed. If local, only connections to "
@@ -361,37 +368,31 @@ msgid ""
 "manually in /etc/hosts.allow (see hosts.allow(5))."
 msgstr ""
 
-#: ../src/msec/help.py:132
+#: ../src/msec/help.py:134
 msgid ""
 "Enable verification of integrity of installed RPM packages. This will notify "
 "you if checksums of the installed files were changed, showing separate "
 "results for binary and configuration files."
 msgstr ""
 
-#: ../src/msec/help.py:134
+#: ../src/msec/help.py:136
 msgid ""
 "Patterns to exclude from disk checks. This parameter is parsed as a regex "
 "(7), so you may use complex expressions."
 msgstr ""
 
-#: ../src/msec/help.py:136
+#: ../src/msec/help.py:138
 msgid ""
-"Allow users in wheel group to use sudo. If this option is set to 'yes', the "
-"users in wheel group are allowed to use sudo and run commands as root by "
-"using their passwords. If this option to set to 'without-password', the "
-"users can use sudo without being asked for their password. WARNING: using "
-"sudo without any password makes your system very vulnerable, and you should "
-"only use this setting if you know what you are doing!"
+"Defines the sectool level to use during the periodic security check. You may "
+"use the sectool-gui application to select individual tests for each level. "
+"If this variable is not defined, the default level defined in sectool "
+"configuration will be used."
 msgstr ""
 
-#: ../src/msec/help.py:138
+#: ../src/msec/help.py:140
 msgid "Set the root umask."
 msgstr "設定 root 的 umask。"
 
-#: ../src/msec/help.py:140
-msgid "Perform hourly security check for changes in system configuration."
-msgstr "每小時進行系統設定變動的安全性檢查。"
-
 #: ../src/msec/help.py:142
 msgid "Enforce MSEC settings on system startup"
 msgstr "加強系統啟動時的 MSEC 設定"
@@ -413,147 +414,147 @@ msgstr "檢查 sgid 檔案的新增/移除"
 msgid "Activate ethernet cards promiscuity check."
 msgstr "啟用網路卡混用檢查。"
 
-#: ../src/msec/libmsec.py:266
+#: ../src/msec/libmsec.py:265
 msgid "%s modified so launched command: %s"
 msgstr "%s 已經變更因此執行命令：%s"
 
-#: ../src/msec/libmsec.py:275
+#: ../src/msec/libmsec.py:274
 msgid "%s modified so should have run command: %s"
 msgstr "%s 已經變更因此應該執行命令：%s"
 
-#: ../src/msec/libmsec.py:377 ../src/msec/libmsec.py:409
+#: ../src/msec/libmsec.py:376 ../src/msec/libmsec.py:408
 msgid "deleted %s"
 msgstr "已刪除 %s"
 
-#: ../src/msec/libmsec.py:395
+#: ../src/msec/libmsec.py:394
 #, fuzzy
 msgid "touched file %s"
 msgstr "無此檔案"
 
-#: ../src/msec/libmsec.py:415
+#: ../src/msec/libmsec.py:414
 #, fuzzy
 msgid "made symbolic link from %s to %s"
 msgstr "正在由 %s 切換至 %s"
 
-#: ../src/msec/libmsec.py:418
+#: ../src/msec/libmsec.py:417
 msgid "moved file %s to %s"
 msgstr "移動檔案 %s 到 %s"
 
-#: ../src/msec/libmsec.py:468 ../src/msec/libmsec.py:484
+#: ../src/msec/libmsec.py:467 ../src/msec/libmsec.py:483
 msgid "set variable %s to %s in %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:686
+#: ../src/msec/libmsec.py:685
 msgid "Error loading plugin '%s' from %s: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:703
+#: ../src/msec/libmsec.py:702
 msgid "Invalid callback: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:712
+#: ../src/msec/libmsec.py:711
 msgid "Plugin %s not found"
 msgstr "沒有找到 Plugin %s"
 
-#: ../src/msec/libmsec.py:719
+#: ../src/msec/libmsec.py:718
 msgid "Not supported function '%s' in '%s'"
 msgstr ""
 
-#: ../src/msec/libmsec.py:726 ../src/msec/libmsec.py:856
+#: ../src/msec/libmsec.py:725 ../src/msec/libmsec.py:855
 msgid "In check-only mode, nothing is written back to disk."
 msgstr "在檢查模式，沒有東西會被寫回磁碟裡。"
 
-#: ../src/msec/libmsec.py:753
+#: ../src/msec/libmsec.py:752
 msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
 msgstr ""
 
-#: ../src/msec/libmsec.py:786
+#: ../src/msec/libmsec.py:785
 msgid "user name %s not found"
 msgstr "使用者名稱 %s 不存在"
 
-#: ../src/msec/libmsec.py:798
+#: ../src/msec/libmsec.py:797
 msgid "user name not found for id %d"
 msgstr "ID %d 的使用者名稱不存在"
 
-#: ../src/msec/libmsec.py:810
+#: ../src/msec/libmsec.py:809
 msgid "group name %s not found"
 msgstr "群組名稱 %s 不存在"
 
-#: ../src/msec/libmsec.py:822
+#: ../src/msec/libmsec.py:821
 msgid "group name not found for id %d"
 msgstr "ID %d 的群組不存在"
 
-#: ../src/msec/libmsec.py:832
+#: ../src/msec/libmsec.py:831
 msgid "Unable to check /proc/mounts. Assuming all file systems are local."
 msgstr "無法檢查 /proc/mounts。假設所有檔案系統都在本地端。"
 
-#: ../src/msec/libmsec.py:871
+#: ../src/msec/libmsec.py:870
 msgid "Forcing ownership of %s to %s"
 msgstr "強制將 %s 的所有權切換給 %s"
 
-#: ../src/msec/libmsec.py:875
+#: ../src/msec/libmsec.py:874
 #, fuzzy
 msgid "Error changing user on %s: %s"
 msgstr "卸下 %s 的掛載時發生錯誤：%s"
 
-#: ../src/msec/libmsec.py:877
+#: ../src/msec/libmsec.py:876
 msgid "Wrong owner of %s: should be %s"
 msgstr "%s 的擁有者錯誤：應該是 %s"
 
-#: ../src/msec/libmsec.py:880
+#: ../src/msec/libmsec.py:879
 #, fuzzy
 msgid "Enforcing group on %s to %s"
 msgstr "正在由 %s 切換至 %s"
 
-#: ../src/msec/libmsec.py:884
+#: ../src/msec/libmsec.py:883
 #, fuzzy
 msgid "Error changing group on %s: %s"
 msgstr "卸下 %s 的掛載時發生錯誤：%s"
 
-#: ../src/msec/libmsec.py:886
+#: ../src/msec/libmsec.py:885
 msgid "Wrong group of %s: should be %s"
 msgstr "%s 的群組錯誤：應該是 %s"
 
-#: ../src/msec/libmsec.py:891
+#: ../src/msec/libmsec.py:890
 msgid "Enforcing permissions on %s to %o"
 msgstr "加強 %s 的權限為 %o"
 
-#: ../src/msec/libmsec.py:895
+#: ../src/msec/libmsec.py:894
 msgid "Error changing permissions on %s: %s"
 msgstr "改變 %s 的權限時發生錯誤：%s"
 
-#: ../src/msec/libmsec.py:897
+#: ../src/msec/libmsec.py:896
 msgid "Wrong permissions of %s: should be %o"
 msgstr "%s 的權限錯誤：應該是 %o"
 
-#: ../src/msec/libmsec.py:901
+#: ../src/msec/libmsec.py:900
 #, fuzzy
 msgid "Enforcing acl on %s"
 msgstr "正在由 %s 切換至 %s"
 
-#: ../src/msec/libmsec.py:915
+#: ../src/msec/libmsec.py:914
 #, fuzzy
 msgid "Unable to add filesystem-specific ACL %s to %s"
 msgstr "重設混音器為預設值"
 
-#: ../src/msec/libmsec.py:917
+#: ../src/msec/libmsec.py:916
 #, fuzzy
 msgid "Error changing acl on %s: %s"
 msgstr "卸下 %s 的掛載時發生錯誤：%s"
 
-#: ../src/msec/libmsec.py:919
+#: ../src/msec/libmsec.py:918
 msgid "Wrong acl of %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:936
+#: ../src/msec/libmsec.py:935
 msgid "bad permissions for '%s': '%s'"
 msgstr "'%s' 的權限錯誤︰'%s'"
 
-#: ../src/msec/libmsec.py:961
+#: ../src/msec/libmsec.py:960
 msgid "Non local file: \"%s\". Nothing changed."
 msgstr "不是本機檔案：\"%s\"。沒有任何變更。"
 
-#: ../src/msec/libmsec.py:1006
+#: ../src/msec/libmsec.py:1005
 msgid "Checking paths: %s"
 msgstr "檢查路徑：%s"
 
@@ -1083,223 +1084,232 @@ msgstr ""
 msgid "New value:"
 msgstr "新值："
 
-#: ../src/msec/plugins/msec.py:149
+#: ../src/msec/plugins/log.py:45
+#, fuzzy
+msgid "Invalid retention period: \"%s\""
+msgstr "Shell 啟動逾時"
+
+#: ../src/msec/plugins/log.py:53
+msgid "Setting log retention period to %d weeks"
+msgstr ""
+
+#: ../src/msec/plugins/msec.py:150
 msgid "Allowing unrestricted chkconfig for packages"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:154
+#: ../src/msec/plugins/msec.py:155
 msgid "Restricting chkconfig for packages according to \"%s\" profile"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:164
+#: ../src/msec/plugins/msec.py:165
 msgid "Setting root umask to %s"
 msgstr "設定 root umask 為 %s"
 
-#: ../src/msec/plugins/msec.py:174
+#: ../src/msec/plugins/msec.py:175
 msgid "Setting users umask to %s"
 msgstr "設定使用者 umask 為 %s"
 
-#: ../src/msec/plugins/msec.py:195
+#: ../src/msec/plugins/msec.py:196
 msgid "Allowing users to connect X server from everywhere"
 msgstr "允許使用者從任何地方連線到 X 伺服器"
 
-#: ../src/msec/plugins/msec.py:198
+#: ../src/msec/plugins/msec.py:199
 msgid "Allowing users to connect X server from localhost"
 msgstr "允許使用者從本機連線到 X 伺服器"
 
-#: ../src/msec/plugins/msec.py:201
+#: ../src/msec/plugins/msec.py:202
 msgid "Restricting X server connection to the console user"
 msgstr "限制 X 伺服器連線給文字模式使用者"
 
-#: ../src/msec/plugins/msec.py:204
+#: ../src/msec/plugins/msec.py:205
 msgid "invalid allow_x_connections arg: %s"
 msgstr "無效的 allow_x_connections 參數：%s"
 
-#: ../src/msec/plugins/msec.py:227
+#: ../src/msec/plugins/msec.py:228
 #, fuzzy
 msgid "Allowing the X server to listen to tcp connections"
 msgstr "允許 X Window 連線"
 
-#: ../src/msec/plugins/msec.py:238
+#: ../src/msec/plugins/msec.py:239
 msgid "Forbidding the X server to listen to tcp connection"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:254
+#: ../src/msec/plugins/msec.py:255
 #, fuzzy
 msgid "Invalid shell timeout \"%s\""
 msgstr "Shell 啟動逾時"
 
-#: ../src/msec/plugins/msec.py:262
+#: ../src/msec/plugins/msec.py:263
 #, fuzzy
 msgid "Setting shell timeout to %s"
 msgstr "Shell 啟動逾時"
 
-#: ../src/msec/plugins/msec.py:270
+#: ../src/msec/plugins/msec.py:271
 #, fuzzy
 msgid "Invalid shell history size \"%s\""
 msgstr "Shell 歷史記錄長度"
 
-#: ../src/msec/plugins/msec.py:281
+#: ../src/msec/plugins/msec.py:282
 msgid "Setting shell history size to %s"
 msgstr "設定 Shell 歷史記錄長度為 %s"
 
-#: ../src/msec/plugins/msec.py:285
+#: ../src/msec/plugins/msec.py:286
 msgid "Removing limit on shell history size"
 msgstr "取消 Shell 歷史記錄長度限制"
 
-#: ../src/msec/plugins/msec.py:294
+#: ../src/msec/plugins/msec.py:295
 msgid "Invalid file system umask \"%s\""
 msgstr "無效的檔案系統 umask \"%s\""
 
-#: ../src/msec/plugins/msec.py:328
+#: ../src/msec/plugins/msec.py:331
 msgid "Allowing reboot and shutdown to the console user"
 msgstr "允許 console 使用者重新開機與關機"
 
-#: ../src/msec/plugins/msec.py:335
+#: ../src/msec/plugins/msec.py:338
 #, fuzzy
 msgid "Allowing SysRq key to the console user"
 msgstr "允許 console 使用者重新開機。"
 
-#: ../src/msec/plugins/msec.py:338
+#: ../src/msec/plugins/msec.py:341
 msgid "Allowing Shutdown/Reboot in GDM"
 msgstr "允許於 GDM 關機/重開機"
 
-#: ../src/msec/plugins/msec.py:342
+#: ../src/msec/plugins/msec.py:350
 msgid "Allowing Shutdown/Reboot in KDM"
 msgstr "允許於 KDM 關機/重開機"
 
-#: ../src/msec/plugins/msec.py:345
+#: ../src/msec/plugins/msec.py:353
 msgid "Allowing Ctrl-Alt-Del from console"
 msgstr "允許文字模式使用 Ctrl-Alt-Del"
 
-#: ../src/msec/plugins/msec.py:349
+#: ../src/msec/plugins/msec.py:357
 msgid "Forbidding reboot and shutdown to the console user"
 msgstr "禁止 console 使用者重新開機與關機"
 
-#: ../src/msec/plugins/msec.py:357
+#: ../src/msec/plugins/msec.py:365
 #, fuzzy
 msgid "Forbidding SysRq key to the console user"
 msgstr "console 使用者重開機"
 
-#: ../src/msec/plugins/msec.py:360
+#: ../src/msec/plugins/msec.py:368
 msgid "Forbidding Shutdown/Reboot in GDM"
 msgstr "禁止在 GDM 裏面進行關機/重開機"
 
-#: ../src/msec/plugins/msec.py:364
+#: ../src/msec/plugins/msec.py:377
 msgid "Forbidding Shutdown/Reboot in KDM"
 msgstr "禁止在 KDM 裏面進行關機/重開機"
 
-#: ../src/msec/plugins/msec.py:367
+#: ../src/msec/plugins/msec.py:380
 msgid "Forbidding Ctrl-Alt-Del from console"
 msgstr "禁止文字模式使用 Ctrl-Alt-Del"
 
-#: ../src/msec/plugins/msec.py:381
+#: ../src/msec/plugins/msec.py:395
 msgid "Allowing list of users in KDM"
 msgstr "允許 KDM 顯示使用者清單"
 
-#: ../src/msec/plugins/msec.py:385
+#: ../src/msec/plugins/msec.py:402
 msgid "Allowing list of users in GDM"
 msgstr "允許 GDM 顯示使用者清單"
 
-#: ../src/msec/plugins/msec.py:390
+#: ../src/msec/plugins/msec.py:407
 msgid "Forbidding list of users in KDM"
 msgstr "禁止 KDM 顯示使用者清單"
 
-#: ../src/msec/plugins/msec.py:394
+#: ../src/msec/plugins/msec.py:414
 msgid "Forbidding list of users in GDM"
 msgstr "禁止 GDM 顯示使用者清單"
 
-#: ../src/msec/plugins/msec.py:405
+#: ../src/msec/plugins/msec.py:425
 msgid "Allowing autologin"
 msgstr "允許自動登入"
 
-#: ../src/msec/plugins/msec.py:408
+#: ../src/msec/plugins/msec.py:428
 msgid "Forbidding autologin"
 msgstr "禁止自動登入。"
 
-#: ../src/msec/plugins/msec.py:413
+#: ../src/msec/plugins/msec.py:433
 msgid "Activating password in boot loader"
 msgstr "在開機管理程式啟用密碼"
 
-#: ../src/msec/plugins/msec.py:427
+#: ../src/msec/plugins/msec.py:447
 msgid "Removing password in boot loader"
 msgstr "移除開機管理程式密碼"
 
-#: ../src/msec/plugins/msec.py:442
+#: ../src/msec/plugins/msec.py:462
 #, fuzzy
 msgid "Enabling log on console"
 msgstr "啟用系統日誌回報到 console 12 上"
 
-#: ../src/msec/plugins/msec.py:446
+#: ../src/msec/plugins/msec.py:466
 #, fuzzy
 msgid "Disabling log on console"
 msgstr "在 Console 顯示圖案"
 
-#: ../src/msec/plugins/msec.py:463
+#: ../src/msec/plugins/msec.py:483
 msgid "Authorizing all services"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:467
+#: ../src/msec/plugins/msec.py:487
 msgid "Disabling all services"
 msgstr "取消所有系統服務"
 
-#: ../src/msec/plugins/msec.py:471
+#: ../src/msec/plugins/msec.py:491
 msgid "Disabling non local services"
 msgstr "停用非本機的服務"
 
-#: ../src/msec/plugins/msec.py:483
+#: ../src/msec/plugins/msec.py:503
 msgid "Enabling sulogin in single user runlevel"
 msgstr "在單一使用者模式啟用 sulogin"
 
-#: ../src/msec/plugins/msec.py:487
+#: ../src/msec/plugins/msec.py:507
 msgid "Disabling sulogin in single user runlevel"
 msgstr "在單一使用者模式停用 sulogin"
 
-#: ../src/msec/plugins/msec.py:498
+#: ../src/msec/plugins/msec.py:518
 msgid "Enabling msec periodic runs"
 msgstr "啟用定期執行 msec"
 
-#: ../src/msec/plugins/msec.py:502
+#: ../src/msec/plugins/msec.py:522
 msgid "Disabling msec periodic runs"
 msgstr "停用定期執行 msec"
 
-#: ../src/msec/plugins/msec.py:515
+#: ../src/msec/plugins/msec.py:535
 msgid "Enabling crontab and at"
 msgstr "啟用 crontab 與 at"
 
-#: ../src/msec/plugins/msec.py:522
+#: ../src/msec/plugins/msec.py:542
 msgid "Disabling crontab and at"
 msgstr "停用 crontab 與 at"
 
-#: ../src/msec/plugins/msec.py:534
+#: ../src/msec/plugins/msec.py:554
 msgid "Allowing export display from root"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:538
+#: ../src/msec/plugins/msec.py:558
 msgid "Forbidding export display from root"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:564
+#: ../src/msec/plugins/msec.py:585
 msgid "Allowing direct root login"
 msgstr "允許 root 直接登入"
 
-#: ../src/msec/plugins/msec.py:581
+#: ../src/msec/plugins/msec.py:608
 msgid "Forbidding direct root login"
 msgstr "禁止 root 直接登入"
 
-#: ../src/msec/plugins/msec.py:603
+#: ../src/msec/plugins/msec.py:630
 msgid "Using secure location for temporary files"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:605
+#: ../src/msec/plugins/msec.py:632
 msgid "Not using secure location for temporary files"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:625
+#: ../src/msec/plugins/msec.py:652
 msgid "Allowing including current directory in path"
 msgstr "允許路徑使用目前的目錄"
 
-#: ../src/msec/plugins/msec.py:628
+#: ../src/msec/plugins/msec.py:655
 msgid "Not allowing including current directory in path"
 msgstr "不允許路徑包含目前的目錄"
 
@@ -1384,3 +1394,40 @@ msgstr ""
 #: ../src/msec/plugins/pam.py:211
 msgid "Disabling transparent root access for wheel group members"
 msgstr "關閉 wheel 群組使用者直接使用 root 權限"
+
+#: ../src/msec/plugins/sudo.py:49
+#, fuzzy
+msgid "Allowing users in wheel group to use sudo"
+msgstr "只允許 wheel 群組的使用者用 su 轉換成管理者。"
+
+#: ../src/msec/plugins/sudo.py:54
+#, fuzzy
+msgid "Allowing users in wheel group to use sudo without password"
+msgstr "只允許 wheel 群組的使用者用 su 轉換成管理者。"
+
+#: ../src/msec/plugins/sudo.py:57
+#, fuzzy
+msgid "Not allowing users in wheel group to use sudo"
+msgstr "只允許 wheel 群組的使用者用 su 轉換成管理者。"
+
+#: ../src/msec/tools.py:33
+#, fuzzy
+msgid "Unable to parse firewall configuration: %s"
+msgstr "無法載入設定檔 %s：%s"
+
+#: ../src/msec/tools.py:38
+msgid "Enabled, with %d rules"
+msgstr ""
+
+#: ../src/msec/tools.py:48
+msgid "Last updated: %s"
+msgstr ""
+
+#: ../src/msec/tools.py:50
+#, fuzzy
+msgid "Unable to access %s: %s"
+msgstr "儲存 %s 設定失敗：%s"
+
+#: ../src/msec/tools.py:51
+msgid "Unable to determine update status"
+msgstr ""