po: sync with the code

1 files changed, 159 insertions, 143 deletions

diff --git a/po/msec.pot b/po/msec.pot
index dbfa399..9acf875 100644
--- a/po/msec.pot
+++ b/po/msec.pot
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2010-02-22 12:19+BRT\n"
+"POT-Creation-Date: 2010-02-26 13:17+BRT\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -27,25 +27,25 @@ msgstr ""
 msgid "Disabled"
 msgstr ""
 
-#: ../src/msec/config.py:211 ../src/msec/config.py:411
+#: ../src/msec/config.py:211 ../src/msec/config.py:423
 msgid "Unable to load configuration file %s: %s"
 msgstr ""
 
-#: ../src/msec/config.py:225 ../src/msec/config.py:322
-#: ../src/msec/config.py:433
+#: ../src/msec/config.py:225 ../src/msec/config.py:334
+#: ../src/msec/config.py:445
 msgid "Bad config option: %s"
 msgstr ""
 
-#: ../src/msec/config.py:260 ../src/msec/config.py:361
-#: ../src/msec/config.py:459
+#: ../src/msec/config.py:260 ../src/msec/config.py:373
+#: ../src/msec/config.py:471
 msgid "Unable to save %s: %s"
 msgstr ""
 
-#: ../src/msec/config.py:307
+#: ../src/msec/config.py:319
 msgid "loading exceptions file %s: %s"
 msgstr ""
 
-#: ../src/msec/config.py:308
+#: ../src/msec/config.py:320
 msgid "No exceptions loaded"
 msgstr ""
 
@@ -74,7 +74,7 @@ msgid "Accept broadcasted ICMP echo."
 msgstr ""
 
 #: ../src/msec/help.py:26
-msgid "Enable verification for changes in the installed RPM packages. This will notify you when new packages are installed or removed."
+msgid "Enable msec to enforce file permissions to the values specified in the msec security policy."
 msgstr ""
 
 #: ../src/msec/help.py:28
@@ -90,7 +90,7 @@ msgid "Enable checking for known rootkits using chkrootkit."
 msgstr ""
 
 #: ../src/msec/help.py:34
-msgid "Enable msec to enforce file permissions to the values specified in the msec security policy."
+msgid "Enable verification for changes in the installed RPM packages. This will notify you when new packages are installed or removed."
 msgstr ""
 
 #: ../src/msec/help.py:36
@@ -106,147 +106,147 @@ msgid "Allow system reboot and shutdown to local users."
 msgstr ""
 
 #: ../src/msec/help.py:42
-msgid "Enable checking for changes in firewall settings."
+msgid "Allow root access without password for the members of the wheel group."
 msgstr ""
 
 #: ../src/msec/help.py:44
-msgid "Enable checking for additions/removals of suid root files."
+msgid "Enable checking for changes in firewall settings."
 msgstr ""
 
 #: ../src/msec/help.py:46
-msgid "Enables logging of periodic checks to system log."
+msgid "Enable checking for additions/removals of suid root files."
 msgstr ""
 
 #: ../src/msec/help.py:48
-msgid "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1) and crontab(1))."
+msgid "Enables logging of periodic checks to system log."
 msgstr ""
 
 #: ../src/msec/help.py:50
-msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
+msgid "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1) and crontab(1))."
 msgstr ""
 
 #: ../src/msec/help.py:52
-msgid "Enable password-related checks, such as empty passwords and strange super-user accounts."
+msgid "Enable checking for changes in system groups."
 msgstr ""
 
 #: ../src/msec/help.py:54
-msgid "Set the password history length to prevent password reuse. This is not supported by pam_tcb."
+msgid "Enable password-related checks, such as empty passwords and strange super-user accounts."
 msgstr ""
 
 #: ../src/msec/help.py:56
-msgid "Enable checksum verification for suid files."
+msgid "Set the password history length to prevent password reuse. This is not supported by pam_tcb."
 msgstr ""
 
 #: ../src/msec/help.py:58
-msgid "Use secure location for temporary files. If this parameter is set to 'yes', user home directory will be used for temporary files. Otherwise, /tmp will be used."
+msgid "Enable checksum verification for suid files."
 msgstr ""
 
 #: ../src/msec/help.py:60
-msgid "User email to receive security notifications."
+msgid "Use secure location for temporary files. If this parameter is set to 'yes', user home directory will be used for temporary files. Otherwise, /tmp will be used."
 msgstr ""
 
 #: ../src/msec/help.py:62
-msgid "Set the user umask."
+msgid "User email to receive security notifications."
 msgstr ""
 
 #: ../src/msec/help.py:64
-msgid "Allow only users in wheel group to su to root."
+msgid "Set the user umask."
 msgstr ""
 
 #: ../src/msec/help.py:66
-msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
+msgid "Allow only users in wheel group to su to root."
 msgstr ""
 
 #: ../src/msec/help.py:68
-msgid "Allow autologin."
+msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
 msgstr ""
 
 #: ../src/msec/help.py:70
-msgid "Enable checking for changes in system users."
+msgid "Allow autologin."
 msgstr ""
 
 #: ../src/msec/help.py:72
-msgid "Enable checking for unowned files."
+msgid "Enable checking for changes in system users."
 msgstr ""
 
 #: ../src/msec/help.py:74
-msgid "Set the shell timeout. A value of zero means no timeout."
+msgid "Enable checking for unowned files."
 msgstr ""
 
 #: ../src/msec/help.py:76
-msgid "Allow display managers (kdm and gdm) to display list of local users."
+msgid "Set the shell timeout. A value of zero means no timeout."
 msgstr ""
 
 #: ../src/msec/help.py:78
-msgid "Enable name resolution spoofing protection."
+msgid "Allow display managers (kdm and gdm) to display list of local users."
 msgstr ""
 
 #: ../src/msec/help.py:80
-msgid "Enforce MSEC file directory permissions on system startup. If this parameter is set to 'enforce', system permissions will be enforced automatically, according to system security settings."
+msgid "Enable name resolution spoofing protection."
 msgstr ""
 
 #: ../src/msec/help.py:82
-msgid "Include current directory into user PATH by default"
+msgid "Enforce MSEC file directory permissions on system startup. If this parameter is set to 'enforce', system permissions will be enforced automatically, according to system security settings."
 msgstr ""
 
 #: ../src/msec/help.py:84
-msgid "Enable permission checking on users' files that should not be owned by someone else, or writable."
+msgid "Include current directory into user PATH by default"
 msgstr ""
 
 #: ../src/msec/help.py:86
-msgid "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --add to decide to add a service if it is present in the file during the installation of packages. By default, two presets are provided: local (which only enables local services) and remote (which also enables some remote services considered safe). Note that the allowed services must be placed manually into the server.SERVER_LEVEL files when necessary."
+msgid "Enable permission checking on users' files that should not be owned by someone else, or writable."
 msgstr ""
 
 #: ../src/msec/help.py:88
-msgid "Use password to authenticate users. Take EXTREME care when disabling passwords, as it will leave the machine vulnerable."
+msgid "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --add to decide to add a service if it is present in the file during the installation of packages. By default, two presets are provided: local (which only enables local services) and remote (which also enables some remote services considered safe). Note that the allowed services must be placed manually into the server.SERVER_LEVEL files when necessary."
 msgstr ""
 
 #: ../src/msec/help.py:90
-msgid "Show security notifications in system tray using libnotify."
+msgid "Use password to authenticate users. Take EXTREME care when disabling passwords, as it will leave the machine vulnerable."
 msgstr ""
 
 #: ../src/msec/help.py:92
-msgid "Set umask option for mounting vfat and ntfs partitions. If umask is '-1', default system umask is used."
+msgid "Show security notifications in system tray using libnotify."
 msgstr ""
 
 #: ../src/msec/help.py:94
-msgid "Enable checking for open network ports."
+msgid "Set umask option for mounting vfat and ntfs partitions. If umask is '-1', default system umask is used."
 msgstr ""
 
 #: ../src/msec/help.py:96
-msgid "Allow direct root login on terminal."
+msgid "Enable checking for open network ports."
 msgstr ""
 
 #: ../src/msec/help.py:98
-msgid "Run security checks when machine is running on battery power."
+msgid "Allow direct root login on terminal."
 msgstr ""
 
 #: ../src/msec/help.py:100
-msgid "Enable checking for changes in system groups."
+msgid "Run security checks when machine is running on battery power."
 msgstr ""
 
 #: ../src/msec/help.py:102
-msgid "Allow remote root login via sshd. If yes, login is allowed. If without-password, only public-key authentication logins are allowed. See sshd_config(5) man page for more information."
+msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
 msgstr ""
 
 #: ../src/msec/help.py:104
-msgid "Enable logging of strange network packets."
+msgid "Allow remote root login via sshd. If yes, login is allowed. If without-password, only public-key authentication logins are allowed. See sshd_config(5) man page for more information."
 msgstr ""
 
 #: ../src/msec/help.py:106
-msgid "Define the default retention period for logs, in weeks. Some countries require that the log files should be kept for 12 months, other do not have such strict requirements. This variable defines the number of past log files that should be kept by logrotate on the system."
+msgid "Enable logging of strange network packets."
 msgstr ""
 
 #: ../src/msec/help.py:108
-msgid "Ask for root password when going to single user level (man sulogin(8))."
+msgid "Define the default retention period for logs, in weeks. Some countries require that the log files should be kept for 12 months, other do not have such strict requirements. This variable defines the number of past log files that should be kept by logrotate on the system."
 msgstr ""
 
 #: ../src/msec/help.py:110
-msgid "Enable IP spoofing protection."
+msgid "Ask for root password when going to single user level (man sulogin(8))."
 msgstr ""
 
 #: ../src/msec/help.py:112
-msgid "Allow root access without password for the members of the wheel group."
+msgid "Enable IP spoofing protection."
 msgstr ""
 
 #: ../src/msec/help.py:114
@@ -282,7 +282,7 @@ msgid "Allow full access to network services controlled by tcp_wrapper (see host
 msgstr ""
 
 #: ../src/msec/help.py:130
-msgid "Enable verification of integrity of installed RPM packages. This will notify you if checksums of the installed files were changed, showing separate results for binary and configuration files."
+msgid "Activate ethernet cards promiscuity check."
 msgstr ""
 
 #: ../src/msec/help.py:132
@@ -290,31 +290,35 @@ msgid "Patterns to exclude from disk checks. This parameter is parsed as a regex
 msgstr ""
 
 #: ../src/msec/help.py:134
-msgid "Set the root umask."
+msgid "Allow users in wheel group to use sudo. If this option is set to 'yes', the users in wheel group are allowed to use sudo and run commands as root by using their passwords. If this option to set to 'without-password', the users can use sudo without being asked for their password. WARNING: using sudo without any password makes your system very vulnerable, and you should only use this setting if you know what you are doing!"
 msgstr ""
 
 #: ../src/msec/help.py:136
-msgid "Perform hourly security check for changes in system configuration."
+msgid "Set the root umask."
 msgstr ""
 
 #: ../src/msec/help.py:138
-msgid "Enforce MSEC settings on system startup"
+msgid "Perform hourly security check for changes in system configuration."
 msgstr ""
 
 #: ../src/msec/help.py:140
-msgid "Enable periodic security check results to terminal."
+msgid "Enforce MSEC settings on system startup"
 msgstr ""
 
 #: ../src/msec/help.py:142
-msgid "Accept bogus IPv4 error messages."
+msgid "Enable periodic security check results to terminal."
 msgstr ""
 
 #: ../src/msec/help.py:144
-msgid "Enable checking for additions/removals of sgid files."
+msgid "Accept bogus IPv4 error messages."
 msgstr ""
 
 #: ../src/msec/help.py:146
-msgid "Activate ethernet cards promiscuity check."
+msgid "Enable checking for additions/removals of sgid files."
+msgstr ""
+
+#: ../src/msec/help.py:148
+msgid "Enable verification of integrity of installed RPM packages. This will notify you if checksums of the installed files were changed, showing separate results for binary and configuration files."
 msgstr ""
 
 #: ../src/msec/libmsec.py:266
@@ -486,30 +490,38 @@ msgid ""
 msgstr ""
 
 #: ../src/msec/msecgui.py:59
-msgid "This profile configures a reasonably safe set of security features. It activates several non-intrusive periodic system checks. This is the suggested level for Desktop."
+msgid "This profile configures a reasonably safe set of security features. It is the suggested level for Desktop. If unsure which profile to use, use this one."
 msgstr ""
 
 #: ../src/msec/msecgui.py:60
-msgid "This profile is focused on netbook or low-end devices, which are only accessed by local users and run on batteries."
+msgid "This profile is focused on netbooks, laptops or low-end devices, which are only accessed by local users and run on batteries."
 msgstr ""
 
 #: ../src/msec/msecgui.py:62
-msgid "This profile is configured to provide maximum security, even at the cost of limiting the remote access to the system. It also runs a wider set of periodic checks. This level is suggested for Servers and security-concerned systems . "
+msgid "This profile is configured to provide maximum security, even at the cost of limiting the remote access to the system. This level is suggested for security-concerned systems and servers. "
 msgstr ""
 
 #: ../src/msec/msecgui.py:64
-msgid "This profile is targeted on storage-oriented servers, such as FTP, SAMBA or NFS servers, or database servers, which do not receive accesses from unauthorized Internet users."
+msgid "This profile is targeted on local network servers, which do not receive accesses from unauthorized Internet users."
 msgstr ""
 
 #: ../src/msec/msecgui.py:66
-msgid "This profile is similar to the 'Fileserver', but it assumes that the server receives connection from unauthorized Internet users."
+msgid "This profile is provided for servers which are intended to be accessed by unauthorized Internet users."
+msgstr ""
+
+#: ../src/msec/msecgui.py:67
+msgid "This profile is intended for the users who do not rely on msec to change system settings, and use it for periodic checks only. It configures all periodic checks to run once a day."
+msgstr ""
+
+#: ../src/msec/msecgui.py:68
+msgid "This profile is similar to the 'audit_daily' profile, but it runs all checks weekly."
 msgstr ""
 
-#: ../src/msec/msecgui.py:73
+#: ../src/msec/msecgui.py:75
 msgid "Custom security level."
 msgstr ""
 
-#: ../src/msec/msecgui.py:76
+#: ../src/msec/msecgui.py:78
 msgid ""
 "<big><b>System security options</b></big>\n"
 "These options control the local security configuration, such as the login restrictions,\n"
@@ -517,20 +529,20 @@ msgid ""
 "permissions.  "
 msgstr ""
 
-#: ../src/msec/msecgui.py:81
+#: ../src/msec/msecgui.py:83
 msgid ""
 "<big><b>Network security options</b></big>\n"
 "These options define the network security against remote threats, unauthorized accesses,\n"
 "and breakin attempts.  "
 msgstr ""
 
-#: ../src/msec/msecgui.py:85
+#: ../src/msec/msecgui.py:87
 msgid ""
 "<big><b>Periodic security checks</b></big>\n"
 "These options configure the security checks that should be executed periodically.  "
 msgstr ""
 
-#: ../src/msec/msecgui.py:88
+#: ../src/msec/msecgui.py:90
 msgid ""
 "<big><b>Exceptions</b></big>\n"
 "Here you can configure the allowed exceptions for msec periodic security\n"
@@ -538,7 +550,7 @@ msgid ""
 "for each check. Note that each exception is parsed as a regexp."
 msgstr ""
 
-#: ../src/msec/msecgui.py:93
+#: ../src/msec/msecgui.py:95
 msgid ""
 "<big><b>File permissions</b></big>\n"
 "These options allow to fine-tune system permissions for important files and directories.\n"
@@ -547,307 +559,311 @@ msgid ""
 "changing them to the specified values when a change is detected.  "
 msgstr ""
 
-#: ../src/msec/msecgui.py:99
+#: ../src/msec/msecgui.py:101
 msgid "Save and apply new configuration?"
 msgstr ""
 
-#: ../src/msec/msecgui.py:132
+#: ../src/msec/msecgui.py:134
 msgid "Unable to load configuration for level '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:138
+#: ../src/msec/msecgui.py:140
 msgid "Unable to load permissions for level '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:171
+#: ../src/msec/msecgui.py:173
 msgid "_File"
 msgstr ""
 
-#: ../src/msec/msecgui.py:173
+#: ../src/msec/msecgui.py:175
 msgid "_Save configuration"
 msgstr ""
 
-#: ../src/msec/msecgui.py:178
+#: ../src/msec/msecgui.py:180
 msgid "_Quit"
 msgstr ""
 
-#: ../src/msec/msecgui.py:180 ../src/msec/msecgui.py:182
+#: ../src/msec/msecgui.py:182 ../src/msec/msecgui.py:184
 msgid "_Help"
 msgstr ""
 
-#: ../src/msec/msecgui.py:183
+#: ../src/msec/msecgui.py:185
 msgid "_About"
 msgstr ""
 
-#: ../src/msec/msecgui.py:210
+#: ../src/msec/msecgui.py:212
 msgid "MSEC: System Security and Audit"
 msgstr ""
 
-#: ../src/msec/msecgui.py:223
+#: ../src/msec/msecgui.py:225
 msgid "Overview"
 msgstr ""
 
-#: ../src/msec/msecgui.py:224
+#: ../src/msec/msecgui.py:226
 msgid "Security settings"
 msgstr ""
 
-#: ../src/msec/msecgui.py:233
+#: ../src/msec/msecgui.py:235
 msgid "Basic security"
 msgstr ""
 
-#: ../src/msec/msecgui.py:234 ../src/msec/msecgui.py:586
+#: ../src/msec/msecgui.py:236
 msgid "System security"
 msgstr ""
 
-#: ../src/msec/msecgui.py:235
+#: ../src/msec/msecgui.py:237
 msgid "Network security"
 msgstr ""
 
-#: ../src/msec/msecgui.py:236
+#: ../src/msec/msecgui.py:238
 msgid "Periodic checks"
 msgstr ""
 
-#: ../src/msec/msecgui.py:237
+#: ../src/msec/msecgui.py:239
 msgid "Exceptions"
 msgstr ""
 
-#: ../src/msec/msecgui.py:238 ../src/msec/msecgui.py:1096
+#: ../src/msec/msecgui.py:240 ../src/msec/msecgui.py:1118
 msgid "Permissions"
 msgstr ""
 
-#: ../src/msec/msecgui.py:278
+#: ../src/msec/msecgui.py:280
 msgid "MSEC option changes"
 msgstr ""
 
-#: ../src/msec/msecgui.py:278
+#: ../src/msec/msecgui.py:280
 msgid "option"
 msgstr ""
 
-#: ../src/msec/msecgui.py:279
+#: ../src/msec/msecgui.py:281
 msgid "System permissions changes"
 msgstr ""
 
-#: ../src/msec/msecgui.py:279
+#: ../src/msec/msecgui.py:281
 msgid "permission check"
 msgstr ""
 
-#: ../src/msec/msecgui.py:289
+#: ../src/msec/msecgui.py:291
 msgid "changed %s <b>%s</b> (%s -> %s)"
 msgstr ""
 
-#: ../src/msec/msecgui.py:294
+#: ../src/msec/msecgui.py:296
 msgid "added %s <b>%s</b> (%s)"
 msgstr ""
 
-#: ../src/msec/msecgui.py:299
+#: ../src/msec/msecgui.py:301
 msgid "removed %s <b>%s</b>"
 msgstr ""
 
-#: ../src/msec/msecgui.py:303
+#: ../src/msec/msecgui.py:305
 msgid "no changes"
 msgstr ""
 
-#: ../src/msec/msecgui.py:316 ../src/msec/msecgui.py:323
+#: ../src/msec/msecgui.py:318 ../src/msec/msecgui.py:325
 msgid "Saving changes.."
 msgstr ""
 
-#: ../src/msec/msecgui.py:319
+#: ../src/msec/msecgui.py:321
 msgid "Ignore and quit"
 msgstr ""
 
-#: ../src/msec/msecgui.py:357
+#: ../src/msec/msecgui.py:359
 msgid ""
 "<b>%s:</b> <i>%s</i>\n"
 msgstr ""
 
-#: ../src/msec/msecgui.py:364
+#: ../src/msec/msecgui.py:366
 msgid "<b>MSEC test run results:</b> <i>%s</i>"
 msgstr ""
 
-#: ../src/msec/msecgui.py:372
+#: ../src/msec/msecgui.py:374
 msgid "Details"
 msgstr ""
 
-#: ../src/msec/msecgui.py:378
+#: ../src/msec/msecgui.py:380
 msgid "MSEC messages (%s): %d"
 msgstr ""
 
-#: ../src/msec/msecgui.py:392
+#: ../src/msec/msecgui.py:394
 msgid "Details (%d changes).."
 msgstr ""
 
-#: ../src/msec/msecgui.py:445
+#: ../src/msec/msecgui.py:447
 msgid "No base msec level specified, using '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:448
+#: ../src/msec/msecgui.py:450
 msgid "Detected base msec level '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:476
+#: ../src/msec/msecgui.py:478
 msgid "Security Option"
 msgstr ""
 
-#: ../src/msec/msecgui.py:486 ../src/msec/msecgui.py:694
+#: ../src/msec/msecgui.py:488 ../src/msec/msecgui.py:715
 msgid "Description"
 msgstr ""
 
-#: ../src/msec/msecgui.py:491
+#: ../src/msec/msecgui.py:493
 msgid "Value"
 msgstr ""
 
-#: ../src/msec/msecgui.py:501
+#: ../src/msec/msecgui.py:503
 msgid "Invalid option '%s'!"
 msgstr ""
 
-#: ../src/msec/msecgui.py:569
+#: ../src/msec/msecgui.py:578
 msgid "Firewall"
 msgstr ""
 
-#: ../src/msec/msecgui.py:576 ../src/msec/msecgui.py:607
-msgid "Configure.."
+#: ../src/msec/msecgui.py:587 ../src/msec/msecgui.py:622
+msgid "Configure"
+msgstr ""
+
+#: ../src/msec/msecgui.py:599
+msgid "Security"
 msgstr ""
 
-#: ../src/msec/msecgui.py:592
+#: ../src/msec/msecgui.py:605
 msgid "Msec is disabled"
 msgstr ""
 
-#: ../src/msec/msecgui.py:595
+#: ../src/msec/msecgui.py:608
 msgid "Msec is enabled"
 msgstr ""
 
-#: ../src/msec/msecgui.py:596
+#: ../src/msec/msecgui.py:609
 msgid "Base security level: '%s'"
 msgstr ""
 
-#: ../src/msec/msecgui.py:604
+#: ../src/msec/msecgui.py:617
 msgid "Custom settings: %d"
 msgstr ""
 
-#: ../src/msec/msecgui.py:617
-msgid "System updates"
+#: ../src/msec/msecgui.py:634
+msgid "Updates"
 msgstr ""
 
-#: ../src/msec/msecgui.py:624
+#: ../src/msec/msecgui.py:643
 msgid "Update now"
 msgstr ""
 
-#: ../src/msec/msecgui.py:654
+#: ../src/msec/msecgui.py:675
 msgid "Enable MSEC tool"
 msgstr ""
 
-#: ../src/msec/msecgui.py:661
+#: ../src/msec/msecgui.py:682
 msgid "Select the base security level"
 msgstr ""
 
-#: ../src/msec/msecgui.py:684
+#: ../src/msec/msecgui.py:705
 msgid "Level name"
 msgstr ""
 
-#: ../src/msec/msecgui.py:740
+#: ../src/msec/msecgui.py:761
 msgid "Send security alerts by email to:"
 msgstr ""
 
-#: ../src/msec/msecgui.py:762
+#: ../src/msec/msecgui.py:783
 msgid "Display security alerts on desktop"
 msgstr ""
 
-#: ../src/msec/msecgui.py:945
+#: ../src/msec/msecgui.py:967
 msgid "Enable periodic security checks"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1007
+#: ../src/msec/msecgui.py:1029
 msgid "Security check"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1013
+#: ../src/msec/msecgui.py:1035
 msgid "Exception"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1034 ../src/msec/msecgui.py:1153
+#: ../src/msec/msecgui.py:1056 ../src/msec/msecgui.py:1175
 msgid "Add a rule"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1039 ../src/msec/msecgui.py:1158
+#: ../src/msec/msecgui.py:1061 ../src/msec/msecgui.py:1180
 msgid "Delete"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1078
+#: ../src/msec/msecgui.py:1100
 msgid "Path"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1084
+#: ../src/msec/msecgui.py:1106
 msgid "User"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1090
+#: ../src/msec/msecgui.py:1112
 msgid "Group"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1104
+#: ../src/msec/msecgui.py:1126
 msgid "Enforce"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1257
+#: ../src/msec/msecgui.py:1279
 msgid "Editing exception"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1262
+#: ../src/msec/msecgui.py:1284
 msgid "Adding new exception"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1269
+#: ../src/msec/msecgui.py:1291
 msgid ""
 "Editing exception. Please select the correspondent msec check and exception value\n"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1276
+#: ../src/msec/msecgui.py:1298
 msgid "Check: "
 msgstr ""
 
-#: ../src/msec/msecgui.py:1291
+#: ../src/msec/msecgui.py:1313
 msgid "Exception: "
 msgstr ""
 
-#: ../src/msec/msecgui.py:1326
+#: ../src/msec/msecgui.py:1348
 msgid "Changing permissions for %s"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1333
+#: ../src/msec/msecgui.py:1355
 msgid "Adding new permission check"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1345
+#: ../src/msec/msecgui.py:1367
 msgid ""
 "Changing permissions on <b>%s</b>\n"
 "Please specify new permissions, or use 'current' to keep current permissions.\n"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1345
+#: ../src/msec/msecgui.py:1367
 msgid "new file"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1353
+#: ../src/msec/msecgui.py:1375
 msgid "File: "
 msgstr ""
 
-#: ../src/msec/msecgui.py:1361
+#: ../src/msec/msecgui.py:1383
 msgid "User: "
 msgstr ""
 
-#: ../src/msec/msecgui.py:1369
+#: ../src/msec/msecgui.py:1391
 msgid "Group: "
 msgstr ""
 
-#: ../src/msec/msecgui.py:1377
+#: ../src/msec/msecgui.py:1399
 msgid "Permissions: "
 msgstr ""
 
-#: ../src/msec/msecgui.py:1434
+#: ../src/msec/msecgui.py:1456
 msgid "Select new value for %s"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1443
+#: ../src/msec/msecgui.py:1465
 msgid ""
 "<i>%s</i>\n"
 "\n"
@@ -855,7 +871,7 @@ msgid ""
 "\t%sDefault level value:\t<i>%s</i>%s\n"
 msgstr ""
 
-#: ../src/msec/msecgui.py:1453
+#: ../src/msec/msecgui.py:1475
 msgid "New value:"
 msgstr ""