Update MSEC translation catalog

1 files changed, 194 insertions, 154 deletions

diff --git a/po/msec.pot b/po/msec.pot
index 1db0d6c..21b2714 100644
--- a/po/msec.pot
+++ b/po/msec.pot
@@ -4,11 +4,11 @@
 #
 msgid ""
 msgstr ""
-"Project-Id-Version: 1.0\n"
-"POT-Creation-Date: 2010-04-30 09:51+BRT\n"
+"Project-Id-Version: PACKAGE VERSION\n"
+"POT-Creation-Date: 2013-06-13 07:42+EEST\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
-"Last-Translator: None <noreply@mandriva.com>\n"
-"Language-Team: None <noreply@mandriva.com>\n"
+"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
+"Language-Team: LANGUAGE <LL@li.org>\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=CHARSET\n"
 "Content-Transfer-Encoding: ENCODING\n"
@@ -23,7 +23,7 @@ msgstr ""
 msgid "No changes in system files"
 msgstr ""
 
-#: ../src/msec/config.py:60
+#: ../src/msec/config.py:60 ../src/msec/tools.py:36
 msgid "Disabled"
 msgstr ""
 
@@ -58,251 +58,251 @@ msgid "Enable checking for files/directories writable by everybody."
 msgstr ""
 
 #: ../src/msec/help.py:18
-msgid "Log syslog messages on console terminal 12."
+msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
 msgstr ""
 
 #: ../src/msec/help.py:20
-msgid "Send mail reports even if no changes were detected."
+msgid "Log syslog messages on console terminal 12."
 msgstr ""
 
 #: ../src/msec/help.py:22
-msgid "Defines the base security level, on top of which the current configuration is based."
+msgid "Send mail reports even if no changes were detected."
 msgstr ""
 
 #: ../src/msec/help.py:24
-msgid "Accept broadcasted ICMP echo."
+msgid "Defines the base security level, on top of which the current configuration is based."
 msgstr ""
 
 #: ../src/msec/help.py:26
-msgid "Enable verification for changes in the installed RPM packages. This will notify you when new packages are installed or removed."
+msgid "Accept broadcasted ICMP echo."
 msgstr ""
 
 #: ../src/msec/help.py:28
-msgid "Enable periodic permission checking for files specified in msec policy."
+msgid "Enable verification for changes in the installed RPM packages. This will notify you when new packages are installed or removed."
 msgstr ""
 
 #: ../src/msec/help.py:30
-msgid "Ignore changes in process IDs when checking for open network ports."
+msgid "Enable periodic permission checking for files specified in msec policy."
 msgstr ""
 
 #: ../src/msec/help.py:32
-msgid "Allow X server to accept connections from network on tcp port 6000."
+msgid "Ignore changes in process IDs when checking for open network ports."
 msgstr ""
 
 #: ../src/msec/help.py:34
-msgid "Enable checking for known rootkits using chkrootkit."
+msgid "Allow X server to accept connections from network on tcp port 6000."
 msgstr ""
 
 #: ../src/msec/help.py:36
-msgid "Enable msec to enforce file permissions to the values specified in the msec security policy."
+msgid "Enable checking for known rootkits using chkrootkit."
 msgstr ""
 
 #: ../src/msec/help.py:38
-msgid "Enable sectools checks. This check will run all sectool checks for a security level configuration. The security level to be used during this test is determined by the CHECK_SECTOOL_LEVELS variable."
+msgid "Enable msec to enforce file permissions to the values specified in the msec security policy."
 msgstr ""
 
 #: ../src/msec/help.py:40
-msgid "Set shell commands history size. A value of -1 means unlimited."
+msgid "Enable sectools checks. This check will run all sectool checks for a security level configuration. The security level to be used during this test is determined by the CHECK_SECTOOL_LEVELS variable."
 msgstr ""
 
 #: ../src/msec/help.py:42
-msgid "Allow system reboot and shutdown to local users."
+msgid "Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
 
 #: ../src/msec/help.py:44
-msgid "Enable checking for changes in firewall settings."
+msgid "Allow system reboot and shutdown to local users."
 msgstr ""
 
 #: ../src/msec/help.py:46
-msgid "Enable checking for additions/removals of suid root files."
+msgid "Enable checking for changes in firewall settings."
 msgstr ""
 
 #: ../src/msec/help.py:48
-msgid "Enables logging of periodic checks to system log."
+msgid "Enable checking for additions/removals of suid root files."
 msgstr ""
 
 #: ../src/msec/help.py:50
-msgid "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1) and crontab(1))."
+msgid "Include current directory into user PATH by default"
 msgstr ""
 
 #: ../src/msec/help.py:52
-msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
+msgid "Enable crontab and at for users. Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1) and crontab(1))."
 msgstr ""
 
 #: ../src/msec/help.py:54
-msgid "Enable password-related checks, such as empty passwords and strange super-user accounts."
+msgid "Set the shell timeout. A value of zero means no timeout."
 msgstr ""
 
 #: ../src/msec/help.py:56
-msgid "Set the password history length to prevent password reuse. This is not supported by pam_tcb."
+msgid "Enable password-related checks, such as empty passwords and strange super-user accounts."
 msgstr ""
 
 #: ../src/msec/help.py:58
-msgid "Enable checksum verification for suid files."
+msgid "Set the password history length to prevent password reuse. This is not supported by pam_tcb."
 msgstr ""
 
 #: ../src/msec/help.py:60
-msgid "Use secure location for temporary files. If this parameter is set to 'yes', user home directory will be used for temporary files. Otherwise, /tmp will be used."
+msgid "Set the user umask."
 msgstr ""
 
 #: ../src/msec/help.py:62
-msgid "User email to receive security notifications."
+msgid "Enable checking for dangerous options in users' .rhosts/.shosts files."
 msgstr ""
 
 #: ../src/msec/help.py:64
-msgid "Set the user umask."
+msgid "User email to receive security notifications."
 msgstr ""
 
 #: ../src/msec/help.py:66
-msgid "Allow only users in wheel group to su to root."
+msgid "Allow autologin."
 msgstr ""
 
 #: ../src/msec/help.py:68
-msgid "Enable checking for empty passwords in /etc/shadow (man shadow(5))."
+msgid "Allow only users in wheel group to su to root."
 msgstr ""
 
 #: ../src/msec/help.py:70
-msgid "Allow autologin."
+msgid "Enable daily security checks."
 msgstr ""
 
 #: ../src/msec/help.py:72
-msgid "Enable checking for changes in system users."
+msgid "Use secure location for temporary files. If this parameter is set to 'yes', user home directory will be used for temporary files. Otherwise, /tmp will be used."
 msgstr ""
 
 #: ../src/msec/help.py:74
-msgid "Enable checking for unowned files."
+msgid "Allow direct root login on terminal."
 msgstr ""
 
 #: ../src/msec/help.py:76
-msgid "Set the shell timeout. A value of zero means no timeout."
+msgid "Enable checking for changes in system users."
 msgstr ""
 
 #: ../src/msec/help.py:78
-msgid "Allow display managers (kdm and gdm) to display list of local users."
+msgid "Enable checking for unowned files."
 msgstr ""
 
 #: ../src/msec/help.py:80
-msgid "Enable name resolution spoofing protection."
+msgid "Enable IP spoofing protection."
 msgstr ""
 
 #: ../src/msec/help.py:82
-msgid "Enforce MSEC file directory permissions on system startup. If this parameter is set to 'enforce', system permissions will be enforced automatically, according to system security settings."
+msgid "Allow display managers (kdm and gdm) to display list of local users."
 msgstr ""
 
 #: ../src/msec/help.py:84
-msgid "Include current directory into user PATH by default"
+msgid "Enable name resolution spoofing protection."
 msgstr ""
 
 #: ../src/msec/help.py:86
-msgid "Enable permission checking on users' files that should not be owned by someone else, or writable."
+msgid "Enforce MSEC file directory permissions on system startup. If this parameter is set to 'enforce', system permissions will be enforced automatically, according to system security settings."
 msgstr ""
 
 #: ../src/msec/help.py:88
-msgid "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --add to decide to add a service if it is present in the file during the installation of packages. By default, two presets are provided: local (which only enables local services) and remote (which also enables some remote services considered safe). Note that the allowed services must be placed manually into the server.SERVER_LEVEL files when necessary."
+msgid "Enables logging of periodic checks to system log."
 msgstr ""
 
 #: ../src/msec/help.py:90
-msgid "Use password to authenticate users. Take EXTREME care when disabling passwords, as it will leave the machine vulnerable."
+msgid "Enable permission checking on users' files that should not be owned by someone else, or writable."
 msgstr ""
 
 #: ../src/msec/help.py:92
-msgid "Show security notifications in system tray using libnotify."
+msgid "Creates the symlink /etc/security/msec/server to point to /etc/security/msec/server.SERVER_LEVEL. The /etc/security/msec/server is used by chkconfig --add to decide to add a service if it is present in the file during the installation of packages. By default, two presets are provided: local (which only enables local services) and remote (which also enables some remote services considered safe). Note that the allowed services must be placed manually into the server.SERVER_LEVEL files when necessary."
 msgstr ""
 
 #: ../src/msec/help.py:94
-msgid "Set umask option for mounting vfat and ntfs partitions. If umask is '-1', default system umask is used."
+msgid "Use password to authenticate users. Take EXTREME care when disabling passwords, as it will leave the machine vulnerable."
 msgstr ""
 
 #: ../src/msec/help.py:96
-msgid "Enable checking for open network ports."
+msgid "Enable checking for changes in system groups."
 msgstr ""
 
 #: ../src/msec/help.py:98
-msgid "Allow direct root login on terminal."
+msgid "Set umask option for mounting vfat and ntfs partitions. If umask is '-1', default system umask is used."
 msgstr ""
 
 #: ../src/msec/help.py:100
-msgid "Run security checks when machine is running on battery power."
+msgid "Show security notifications in system tray using libnotify."
 msgstr ""
 
 #: ../src/msec/help.py:102
-msgid "Enable checking for changes in system groups."
+msgid "Enable checking for open network ports."
 msgstr ""
 
 #: ../src/msec/help.py:104
-msgid "Allow remote root login via sshd. If yes, login is allowed. If without-password, only public-key authentication logins are allowed. See sshd_config(5) man page for more information."
+msgid "Run security checks when machine is running on battery power."
 msgstr ""
 
 #: ../src/msec/help.py:106
-msgid "Enable logging of strange network packets."
+msgid "Perform hourly security check for changes in system configuration."
 msgstr ""
 
 #: ../src/msec/help.py:108
-msgid "Define the default retention period for logs, in weeks. Some countries require that the log files should be kept for 12 months, other do not have such strict requirements. This variable defines the number of past log files that should be kept by logrotate on the system."
+msgid "Allow remote root login via sshd. If yes, login is allowed. If without-password, only public-key authentication logins are allowed. See sshd_config(5) man page for more information."
 msgstr ""
 
 #: ../src/msec/help.py:110
-msgid "Ask for root password when going to single user level (man sulogin(8))."
+msgid "Enable logging of strange network packets."
 msgstr ""
 
 #: ../src/msec/help.py:112
-msgid "Enable IP spoofing protection."
+msgid "Define the default retention period for logs, in weeks. Some countries require that the log files should be kept for 12 months, other do not have such strict requirements. This variable defines the number of past log files that should be kept by logrotate on the system."
 msgstr ""
 
 #: ../src/msec/help.py:114
-msgid "Allow root access without password for the members of the wheel group."
+msgid "Ask for root password when going to single user level (man sulogin(8))."
 msgstr ""
 
 #: ../src/msec/help.py:116
-msgid "Fix owner and group of unowned files to use nobody/nogroup."
+msgid "Allow root access without password for the members of the wheel group."
 msgstr ""
 
 #: ../src/msec/help.py:118
-msgid "Send security check results by email."
+msgid "Fix owner and group of unowned files to use nobody/nogroup."
 msgstr ""
 
 #: ../src/msec/help.py:120
-msgid "Allow to export display when passing from the root account to the other users. See pam_xauth(8) for more details."
+msgid "Send security check results by email."
 msgstr ""
 
 #: ../src/msec/help.py:122
-msgid "Defines the sectool level to use during the periodic security check. You may use the sectool-gui application to select individual tests for each level. If this variable is not defined, the default level defined in sectool configuration will be used."
+msgid "Allow to export display when passing from the root account to the other users. See pam_xauth(8) for more details."
 msgstr ""
 
 #: ../src/msec/help.py:124
-msgid "Enable daily security checks."
+msgid "Allow users in wheel group to use sudo. If this option is set to 'yes', the users in wheel group are allowed to use sudo and run commands as root by using their passwords. If this option to set to 'without-password', the users can use sudo without being asked for their password. WARNING: using sudo without any password makes your system very vulnerable, and you should only use this setting if you know what you are doing!"
 msgstr ""
 
 #: ../src/msec/help.py:126
-msgid "Accept ICMP echo."
+msgid "Enable checksum verification for suid files."
 msgstr ""
 
 #: ../src/msec/help.py:128
-msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters, using length,ndigits,nupper format."
+msgid "Accept ICMP echo."
 msgstr ""
 
 #: ../src/msec/help.py:130
-msgid "Allow full access to network services controlled by tcp_wrapper (see hosts.deny(5)). If yes, all services are allowed. If local, only connections to local services are authorized. If no, the services must be authorized manually in /etc/hosts.allow (see hosts.allow(5))."
+msgid "Set the password minimum length and minimum number of digit and minimum number of capitalized letters, using length,ndigits,nupper format."
 msgstr ""
 
 #: ../src/msec/help.py:132
-msgid "Enable verification of integrity of installed RPM packages. This will notify you if checksums of the installed files were changed, showing separate results for binary and configuration files."
+msgid "Allow full access to network services controlled by tcp_wrapper (see hosts.deny(5)). If yes, all services are allowed. If local, only connections to local services are authorized. If no, the services must be authorized manually in /etc/hosts.allow (see hosts.allow(5))."
 msgstr ""
 
 #: ../src/msec/help.py:134
-msgid "Patterns to exclude from disk checks. This parameter is parsed as a regex (7), so you may use complex expressions."
+msgid "Enable verification of integrity of installed RPM packages. This will notify you if checksums of the installed files were changed, showing separate results for binary and configuration files."
 msgstr ""
 
 #: ../src/msec/help.py:136
-msgid "Allow users in wheel group to use sudo. If this option is set to 'yes', the users in wheel group are allowed to use sudo and run commands as root by using their passwords. If this option to set to 'without-password', the users can use sudo without being asked for their password. WARNING: using sudo without any password makes your system very vulnerable, and you should only use this setting if you know what you are doing!"
+msgid "Patterns to exclude from disk checks. This parameter is parsed as a regex (7), so you may use complex expressions."
 msgstr ""
 
 #: ../src/msec/help.py:138
-msgid "Set the root umask."
+msgid "Defines the sectool level to use during the periodic security check. You may use the sectool-gui application to select individual tests for each level. If this variable is not defined, the default level defined in sectool configuration will be used."
 msgstr ""
 
 #: ../src/msec/help.py:140
-msgid "Perform hourly security check for changes in system configuration."
+msgid "Set the root umask."
 msgstr ""
 
 #: ../src/msec/help.py:142
@@ -325,139 +325,139 @@ msgstr ""
 msgid "Activate ethernet cards promiscuity check."
 msgstr ""
 
-#: ../src/msec/libmsec.py:266
+#: ../src/msec/libmsec.py:265
 msgid "%s modified so launched command: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:275
+#: ../src/msec/libmsec.py:274
 msgid "%s modified so should have run command: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:377 ../src/msec/libmsec.py:409
+#: ../src/msec/libmsec.py:376 ../src/msec/libmsec.py:408
 msgid "deleted %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:395
+#: ../src/msec/libmsec.py:394
 msgid "touched file %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:415
+#: ../src/msec/libmsec.py:414
 msgid "made symbolic link from %s to %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:418
+#: ../src/msec/libmsec.py:417
 msgid "moved file %s to %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:468 ../src/msec/libmsec.py:484
+#: ../src/msec/libmsec.py:467 ../src/msec/libmsec.py:483
 msgid "set variable %s to %s in %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:686
+#: ../src/msec/libmsec.py:685
 msgid "Error loading plugin '%s' from %s: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:703
+#: ../src/msec/libmsec.py:702
 msgid "Invalid callback: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:712
+#: ../src/msec/libmsec.py:711
 msgid "Plugin %s not found"
 msgstr ""
 
-#: ../src/msec/libmsec.py:719
+#: ../src/msec/libmsec.py:718
 msgid "Not supported function '%s' in '%s'"
 msgstr ""
 
-#: ../src/msec/libmsec.py:726 ../src/msec/libmsec.py:856
+#: ../src/msec/libmsec.py:725 ../src/msec/libmsec.py:855
 msgid "In check-only mode, nothing is written back to disk."
 msgstr ""
 
-#: ../src/msec/libmsec.py:753
+#: ../src/msec/libmsec.py:752
 msgid "Invalid parameter for %s: '%s'. Valid parameters: '%s'."
 msgstr ""
 
-#: ../src/msec/libmsec.py:786
+#: ../src/msec/libmsec.py:785
 msgid "user name %s not found"
 msgstr ""
 
-#: ../src/msec/libmsec.py:798
+#: ../src/msec/libmsec.py:797
 msgid "user name not found for id %d"
 msgstr ""
 
-#: ../src/msec/libmsec.py:810
+#: ../src/msec/libmsec.py:809
 msgid "group name %s not found"
 msgstr ""
 
-#: ../src/msec/libmsec.py:822
+#: ../src/msec/libmsec.py:821
 msgid "group name not found for id %d"
 msgstr ""
 
-#: ../src/msec/libmsec.py:832
+#: ../src/msec/libmsec.py:831
 msgid "Unable to check /proc/mounts. Assuming all file systems are local."
 msgstr ""
 
-#: ../src/msec/libmsec.py:871
+#: ../src/msec/libmsec.py:870
 msgid "Forcing ownership of %s to %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:875
+#: ../src/msec/libmsec.py:874
 msgid "Error changing user on %s: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:877
+#: ../src/msec/libmsec.py:876
 msgid "Wrong owner of %s: should be %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:880
+#: ../src/msec/libmsec.py:879
 msgid "Enforcing group on %s to %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:884
+#: ../src/msec/libmsec.py:883
 msgid "Error changing group on %s: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:886
+#: ../src/msec/libmsec.py:885
 msgid "Wrong group of %s: should be %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:891
+#: ../src/msec/libmsec.py:890
 msgid "Enforcing permissions on %s to %o"
 msgstr ""
 
-#: ../src/msec/libmsec.py:895
+#: ../src/msec/libmsec.py:894
 msgid "Error changing permissions on %s: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:897
+#: ../src/msec/libmsec.py:896
 msgid "Wrong permissions of %s: should be %o"
 msgstr ""
 
-#: ../src/msec/libmsec.py:901
+#: ../src/msec/libmsec.py:900
 msgid "Enforcing acl on %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:915
+#: ../src/msec/libmsec.py:914
 msgid "Unable to add filesystem-specific ACL %s to %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:917
+#: ../src/msec/libmsec.py:916
 msgid "Error changing acl on %s: %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:919
+#: ../src/msec/libmsec.py:918
 msgid "Wrong acl of %s"
 msgstr ""
 
-#: ../src/msec/libmsec.py:936
+#: ../src/msec/libmsec.py:935
 msgid "bad permissions for '%s': '%s'"
 msgstr ""
 
-#: ../src/msec/libmsec.py:961
+#: ../src/msec/libmsec.py:960
 msgid "Non local file: \"%s\". Nothing changed."
 msgstr ""
 
-#: ../src/msec/libmsec.py:1006
+#: ../src/msec/libmsec.py:1005
 msgid "Checking paths: %s"
 msgstr ""
 
@@ -956,215 +956,223 @@ msgstr ""
 msgid "New value:"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:149
+#: ../src/msec/plugins/log.py:45
+msgid "Invalid retention period: \"%s\""
+msgstr ""
+
+#: ../src/msec/plugins/log.py:53
+msgid "Setting log retention period to %d weeks"
+msgstr ""
+
+#: ../src/msec/plugins/msec.py:150
 msgid "Allowing unrestricted chkconfig for packages"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:154
+#: ../src/msec/plugins/msec.py:155
 msgid "Restricting chkconfig for packages according to \"%s\" profile"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:164
+#: ../src/msec/plugins/msec.py:165
 msgid "Setting root umask to %s"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:174
+#: ../src/msec/plugins/msec.py:175
 msgid "Setting users umask to %s"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:195
+#: ../src/msec/plugins/msec.py:196
 msgid "Allowing users to connect X server from everywhere"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:198
+#: ../src/msec/plugins/msec.py:199
 msgid "Allowing users to connect X server from localhost"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:201
+#: ../src/msec/plugins/msec.py:202
 msgid "Restricting X server connection to the console user"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:204
+#: ../src/msec/plugins/msec.py:205
 msgid "invalid allow_x_connections arg: %s"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:227
+#: ../src/msec/plugins/msec.py:228
 msgid "Allowing the X server to listen to tcp connections"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:238
+#: ../src/msec/plugins/msec.py:239
 msgid "Forbidding the X server to listen to tcp connection"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:254
+#: ../src/msec/plugins/msec.py:255
 msgid "Invalid shell timeout \"%s\""
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:262
+#: ../src/msec/plugins/msec.py:263
 msgid "Setting shell timeout to %s"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:270
+#: ../src/msec/plugins/msec.py:271
 msgid "Invalid shell history size \"%s\""
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:281
+#: ../src/msec/plugins/msec.py:282
 msgid "Setting shell history size to %s"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:285
+#: ../src/msec/plugins/msec.py:286
 msgid "Removing limit on shell history size"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:294
+#: ../src/msec/plugins/msec.py:295
 msgid "Invalid file system umask \"%s\""
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:328
+#: ../src/msec/plugins/msec.py:331
 msgid "Allowing reboot and shutdown to the console user"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:335
+#: ../src/msec/plugins/msec.py:338
 msgid "Allowing SysRq key to the console user"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:338
+#: ../src/msec/plugins/msec.py:341
 msgid "Allowing Shutdown/Reboot in GDM"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:342
+#: ../src/msec/plugins/msec.py:350
 msgid "Allowing Shutdown/Reboot in KDM"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:345
+#: ../src/msec/plugins/msec.py:353
 msgid "Allowing Ctrl-Alt-Del from console"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:349
+#: ../src/msec/plugins/msec.py:357
 msgid "Forbidding reboot and shutdown to the console user"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:357
+#: ../src/msec/plugins/msec.py:365
 msgid "Forbidding SysRq key to the console user"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:360
+#: ../src/msec/plugins/msec.py:368
 msgid "Forbidding Shutdown/Reboot in GDM"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:364
+#: ../src/msec/plugins/msec.py:377
 msgid "Forbidding Shutdown/Reboot in KDM"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:367
+#: ../src/msec/plugins/msec.py:380
 msgid "Forbidding Ctrl-Alt-Del from console"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:381
+#: ../src/msec/plugins/msec.py:395
 msgid "Allowing list of users in KDM"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:385
+#: ../src/msec/plugins/msec.py:402
 msgid "Allowing list of users in GDM"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:390
+#: ../src/msec/plugins/msec.py:407
 msgid "Forbidding list of users in KDM"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:394
+#: ../src/msec/plugins/msec.py:414
 msgid "Forbidding list of users in GDM"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:405
+#: ../src/msec/plugins/msec.py:425
 msgid "Allowing autologin"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:408
+#: ../src/msec/plugins/msec.py:428
 msgid "Forbidding autologin"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:413
+#: ../src/msec/plugins/msec.py:433
 msgid "Activating password in boot loader"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:427
+#: ../src/msec/plugins/msec.py:447
 msgid "Removing password in boot loader"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:442
+#: ../src/msec/plugins/msec.py:462
 msgid "Enabling log on console"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:446
+#: ../src/msec/plugins/msec.py:466
 msgid "Disabling log on console"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:463
+#: ../src/msec/plugins/msec.py:483
 msgid "Authorizing all services"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:467
+#: ../src/msec/plugins/msec.py:487
 msgid "Disabling all services"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:471
+#: ../src/msec/plugins/msec.py:491
 msgid "Disabling non local services"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:483
+#: ../src/msec/plugins/msec.py:503
 msgid "Enabling sulogin in single user runlevel"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:487
+#: ../src/msec/plugins/msec.py:507
 msgid "Disabling sulogin in single user runlevel"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:498
+#: ../src/msec/plugins/msec.py:518
 msgid "Enabling msec periodic runs"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:502
+#: ../src/msec/plugins/msec.py:522
 msgid "Disabling msec periodic runs"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:515
+#: ../src/msec/plugins/msec.py:535
 msgid "Enabling crontab and at"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:522
+#: ../src/msec/plugins/msec.py:542
 msgid "Disabling crontab and at"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:534
+#: ../src/msec/plugins/msec.py:554
 msgid "Allowing export display from root"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:538
+#: ../src/msec/plugins/msec.py:558
 msgid "Forbidding export display from root"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:564
+#: ../src/msec/plugins/msec.py:585
 msgid "Allowing direct root login"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:581
+#: ../src/msec/plugins/msec.py:608
 msgid "Forbidding direct root login"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:603
+#: ../src/msec/plugins/msec.py:630
 msgid "Using secure location for temporary files"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:605
+#: ../src/msec/plugins/msec.py:632
 msgid "Not using secure location for temporary files"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:625
+#: ../src/msec/plugins/msec.py:652
 msgid "Allowing including current directory in path"
 msgstr ""
 
-#: ../src/msec/plugins/msec.py:628
+#: ../src/msec/plugins/msec.py:655
 msgid "Not allowing including current directory in path"
 msgstr ""
 
@@ -1244,3 +1252,35 @@ msgstr ""
 msgid "Disabling transparent root access for wheel group members"
 msgstr ""
 
+#: ../src/msec/plugins/sudo.py:49
+msgid "Allowing users in wheel group to use sudo"
+msgstr ""
+
+#: ../src/msec/plugins/sudo.py:54
+msgid "Allowing users in wheel group to use sudo without password"
+msgstr ""
+
+#: ../src/msec/plugins/sudo.py:57
+msgid "Not allowing users in wheel group to use sudo"
+msgstr ""
+
+#: ../src/msec/tools.py:33
+msgid "Unable to parse firewall configuration: %s"
+msgstr ""
+
+#: ../src/msec/tools.py:38
+msgid "Enabled, with %d rules"
+msgstr ""
+
+#: ../src/msec/tools.py:48
+msgid "Last updated: %s"
+msgstr ""
+
+#: ../src/msec/tools.py:50
+msgid "Unable to access %s: %s"
+msgstr ""
+
+#: ../src/msec/tools.py:51
+msgid "Unable to determine update status"
+msgstr ""
+