diff options
Diffstat (limited to 'rpi')
| -rw-r--r-- | rpi/boot.cmd | 5 | ||||
| -rw-r--r-- | rpi/u-boot.config | 11 |
2 files changed, 16 insertions, 0 deletions
diff --git a/rpi/boot.cmd b/rpi/boot.cmd new file mode 100644 index 0000000..4d2f4c2 --- /dev/null +++ b/rpi/boot.cmd @@ -0,0 +1,5 @@ +fatload mmc 0:1 ${kernel_addr_r} zImage +fatload mmc 0:1 ${fdt_addr_r} bcm2710-rpi-3-b.dtb +fatload mmc 0:1 ${ramdisk_addr_r} uInitrd +setenv bootargs console=ttyAMA0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait panic=10 +bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r} diff --git a/rpi/u-boot.config b/rpi/u-boot.config new file mode 100644 index 0000000..b8ca6e7 --- /dev/null +++ b/rpi/u-boot.config @@ -0,0 +1,11 @@ +# swarren's branch already sets this automatically, so you can skip this +# Mainline U-Boot will set the following automatically soon +setenv fdtfile bcm2835-rpi-b.dtb + +mmc dev 0 +fatload mmc 0:1 ${kernel_addr_r} zImage +# IMPORTANT NOTE: On mainline u-boot, the correct variable to use here is ${fdt_addr} and NOT ${fdt_addr_r} +fatload mmc 0:1 ${fdt_addr_r} ${fdtfile} +setenv bootargs earlyprintk console=tty0 console=ttyAMA0 root=/dev/mmcblk0p2 rootfstype=ext4 rootwait noinitrd +# IMPORTANT NOTE: On mainline u-boot, the correct variable to use here is ${fdt_addr} and NOT ${fdt_addr_r} +bootz ${kernel_addr_r} - ${fdt_addr_r} |