deleting some old files no more needed

19 files changed, 101 insertions, 2497 deletions

diff --git a/extlinux.conf b/extlinux.conf
deleted file mode 100644
index b06ccc7..0000000
--- a/extlinux.conf
+++ /dev/null
@@ -1,22 +0,0 @@
-# File generated by DrakX/drakboot
-default Mageia
-timeout 20
-menu title Boot Menu
-
-label Mageia
-  kernel /boot/vmlinuz
-  initrd /boot/initrd
-  fdtdir /usr/lib/linux-4.19.11-desktop-2.mga7
-  append root=UUID=f9fdc05d-2cc9-42d8-a8dc-2f79ff008045 dwc_otg.lpm_enable=0 kgdboc=ttyS0,115200 console=tty1 rootwait fsck.repair=1 elevator=deadline cma=256M\@512M audit=0 disable_overscan=1
-
-label linux
-  kernel /boot/vmlinuz
-  initrd /boot/initrd.img
-  fdtdir /usr/lib/linux-4.19.12-desktop-2.mga7
-  append root=UUID=f9fdc05d-2cc9-42d8-a8dc-2f79ff008045 8250.nr_uarts=1 console=ttyS0,115200 console=tty1 elevator=deadline cma=256M@512M
-
-label desktop 4.19.12-2.mga7
-  kernel /boot/vmlinuz-4.19.12-desktop-2.mga7
-  initrd /boot/initrd-4.19.12-desktop-2.mga7.img
-  fdtdir /usr/lib/linux-4.19.12-desktop-2.mga7
-  append root=UUID=f9fdc05d-2cc9-42d8-a8dc-2f79ff008045 8250.nr_uarts=1 console=ttyS0,115200 console=tty1 elevator=deadline cma=256M@512M
diff --git a/rpi/bcm2836-rpi-2-b.dtb b/rpi/bcm2836-rpi-2-b.dtb
deleted file mode 100755
index 06ba65b..0000000
--- a/rpi/bcm2836-rpi-2-b.dtb
+++ /dev/null
diff --git a/rpi/bcm2837-rpi-3-b-plus.dtb b/rpi/bcm2837-rpi-3-b-plus.dtb
deleted file mode 100755
index 9fa2dd4..0000000
--- a/rpi/bcm2837-rpi-3-b-plus.dtb
+++ /dev/null
diff --git a/rpi/bcm2837-rpi-3-b.dtb b/rpi/bcm2837-rpi-3-b.dtb
deleted file mode 100755
index 7ed21fb..0000000
--- a/rpi/bcm2837-rpi-3-b.dtb
+++ /dev/null
diff --git a/rpi/boot.cmd b/rpi/boot.cmd
deleted file mode 100644
index f16ad1d..0000000
--- a/rpi/boot.cmd
+++ /dev/null
@@ -1,5 +0,0 @@
-fatload mmc 0:1 ${kernel_addr_r} vmlinuz
-fatload mmc 0:1 ${fdt_addr_r} bcm2710-rpi-3-b.dtb
-fatload mmc 0:1 ${ramdisk_addr_r} initrd.img
-setenv bootargs console=ttyAMA0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait panic=10
-bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr_r}
diff --git a/rpi/config.txt b/rpi/config.txt
deleted file mode 100644
index a27b5de..0000000
--- a/rpi/config.txt
+++ /dev/null
@@ -1,1193 +0,0 @@
-################################################################################
-##  Raspberry Pi Configuration Settings
-##
-##  Revision 16, 2013/06/22
-##
-##  Details taken from the eLinux wiki
-##  For up-to-date information please refer to wiki page.
-##
-##  Wiki Location : http://elinux.org/RPiconfig
-##
-##
-##  Description:
-##    Details of each setting are described with each section that begins with
-##    a double hashed comment ('##')
-##    It is up to the user to remove the single hashed comment ('#') from each
-##    option they want to enable, and to set the specific value of that option.
-##
-##  Overclock settings will be disabled at runtime if the SoC reaches temp_limit
-##
-################################################################################
-
-#dtoverlay=vc4-kms-v3d,cma-128
-
-
-
-
-
-################################################################################
-##  Standard Definition Video Settings
-################################################################################
-
-## sdtv_mode
-##     defines the TV standard for composite output
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Normal NTSC (Default)
-##     1        Japanese version of NTSC - no pedestal
-##     2        Normal PAL
-##     3        Brazilian version of PAL - 525/60 rather than 625/50, different
-##              subcarrier
-##
-#sdtv_mode=0
-
-## sdtv_aspect
-##     defines the aspect ratio for composite output
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     1        4:3 (Default)
-##     2        14:9
-##     3        16:9
-##
-sdtv_aspect=3
-
-## sdtv_disable_colourburst
-##     Disables colour burst on composite output. The picture will be
-##     monochrome, but possibly sharper
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Colour burst is enabled (Default)
-##     1        Colour burst is disabled
-##
-#sdtv_disable_colourburst=1
-
-################################################################################
-##  High Definition Video Settings
-################################################################################
-
-## hdmi_safe
-##     Use "safe mode" settings to try to boot with maximum hdmi compatibility.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disabled (Default)
-##     1        Enabled (this does: hdmi_force_hotplug=1,
-##                                  hdmi_ignore_edid=0xa5000080,
-##                                  config_hdmi_boost=4, hdmi_group=2,
-##                                  hdmi_mode=4, disable_overscan=0,
-##                                  overscan_left=24, overscan_right=24,
-##                                  overscan_top=24, overscan_bottom=24)
-##
-#hdmi_safe=1
-
-## hdmi_force_hotplug
-##     Pretends HDMI hotplug signal is asserted so it appears a HDMI display
-##     is attached
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disabled (Default)
-##     1        Use HDMI mode even if no HDMI monitor is detected
-##
-#hdmi_force_hotplug=1
-
-## hdmi_ignore_hotplug
-##     Pretends HDMI hotplug signal is not asserted so it appears a HDMI
-##     display is not attached
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disabled (Default)
-##     1        Use composite mode even if HDMI monitor is detected
-##
-#hdmi_ignore_hotplug=1
-
-## hdmi_drive
-##     chooses between HDMI and DVI modes
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     1        Normal DVI mode (No sound)
-##     2        Normal HDMI mode (Sound will be sent if supported and enabled)
-##
-#hdmi_drive=2
-
-## hdmi_ignore_edid
-##     Enables the ignoring of EDID/display data
-##
-#hdmi_ignore_edid=0xa5000080
-
-## hdmi_edid_file
-##     Read the EDID data from the edid.dat file instead of from the attached
-##     device
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Read EDID data from attached device (Default)
-##     1        Read EDID data from edid.txt file
-##
-#hdmi_edid_file=1
-
-## hdmi_ignore_edid_audio
-##     Pretends all audio formats are unsupported by display. This means ALSA
-##     will default to analogue.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use EDID provided values (Default)
-##     1        Pretend all audio formats are unsupported
-##
-#hdmi_ignore_edid_audio=1
-
-## hdmi_force_edid_audio
-##     Pretends all audio formats are supported by display, allowing
-##     passthrough of DTS/AC3 even when not reported as supported.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use EDID provided values (Default)
-##     1        Pretend all audio formats are supported
-##
-#hdmi_force_edid_audio=1
-
-## hdmi_force_edid_3d
-##     Pretends all CEA modes support 3D even when edid doesn't indicate
-##     support for them.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use EDID provided values (Default)
-##     1        Pretend 3D mode is supported
-##
-#hdmi_force_edid_3d=1
-
-## avoid_edid_fuzzy_match
-##     Avoid fuzzy matching of modes described in edid.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use fuzzy matching (Default)
-##     1        Avoid fuzzy matching
-##
-#avoid_edid_fuzzy_match=1
-
-## hdmi_pixel_encoding
-##     Force the pixel encoding mode.
-##     By default it will use the mode requested from edid so shouldn't
-##     need changing.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use EDID provided values (Default)
-##     1        RGB limited   (16-235)
-##     2        RGB full      ( 0-255)
-##     3        YCbCr limited (16-235)
-##     4        YCbCr limited ( 0-255)
-##
-#hdmi_pixel_encoding=1
-
-## hdmi_group
-##     Defines the HDMI type
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use the preferred group reported by the edid (Default)
-##     1        CEA
-##     2        DMT
-##
-#hdmi_group=1
-
-## hdmi_mode
-##     defines screen resolution in CEA or DMT format
-##
-##     H means 16:9 variant (of a normally 4:3 mode).
-##     2x means pixel doubled (i.e. higher clock rate, with each pixel repeated
-##                                  twice)
-##     4x means pixel quadrupled (i.e. higher clock rate, with each pixel
-##                                     repeated four times)
-##     reduced blanking means fewer bytes are used for blanking within the data
-##                      stream (i.e. lower clock rate, with fewer wasted bytes)
-##
-##     Value    hdmi_group=CEA                  hdmi_group=DMT
-##     -------------------------------------------------------------------------
-##     1        VGA                             640x350   85Hz
-##     2        480p  60Hz                      640x400   85Hz
-##     3        480p  60Hz  H                   720x400   85Hz
-##     4        720p  60Hz                      640x480   60Hz
-##     5        1080i 60Hz                      640x480   72Hz
-##     6        480i  60Hz                      640x480   75Hz
-##     7        480i  60Hz  H                   640x480   85Hz
-##     8        240p  60Hz                      800x600   56Hz
-##     9        240p  60Hz  H                   800x600   60Hz
-##     10       480i  60Hz  4x                  800x600   72Hz
-##     11       480i  60Hz  4x H                800x600   75Hz
-##     12       240p  60Hz  4x                  800x600   85Hz
-##     13       240p  60Hz  4x H                800x600   120Hz
-##     14       480p  60Hz  2x                  848x480   60Hz
-##     15       480p  60Hz  2x H                1024x768  43Hz  DO NOT USE
-##     16       1080p 60Hz                      1024x768  60Hz
-##     17       576p  50Hz                      1024x768  70Hz
-##     18       576p  50Hz  H                   1024x768  75Hz
-##     19       720p  50Hz                      1024x768  85Hz
-##     20       1080i 50Hz                      1024x768  120Hz
-##     21       576i  50Hz                      1152x864  75Hz
-##     22       576i  50Hz  H                   1280x768        reduced blanking
-##     23       288p  50Hz                      1280x768  60Hz
-##     24       288p  50Hz  H                   1280x768  75Hz
-##     25       576i  50Hz  4x                  1280x768  85Hz
-##     26       576i  50Hz  4x H                1280x768  120Hz reduced blanking
-##     27       288p  50Hz  4x                  1280x800        reduced blanking
-##     28       288p  50Hz  4x H                1280x800  60Hz
-##     29       576p  50Hz  2x                  1280x800  75Hz
-##     30       576p  50Hz  2x H                1280x800  85Hz
-##     31       1080p 50Hz                      1280x800  120Hz reduced blanking
-##     32       1080p 24Hz                      1280x960  60Hz
-##     33       1080p 25Hz                      1280x960  85Hz
-##     34       1080p 30Hz                      1280x960  120Hz reduced blanking
-##     35       480p  60Hz  4x                  1280x1024 60Hz
-##     36       480p  60Hz  4x H                1280x1024 75Hz
-##     37       576p  50Hz  4x                  1280x1024 85Hz
-##     38       576p  50Hz  4x H                1280x1024 120Hz reduced blanking
-##     39       1080i 50Hz  reduced blanking    1360x768  60Hz
-##     40       1080i 100Hz                     1360x768  120Hz reduced blanking
-##     41       720p  100Hz                     1400x1050       reduced blanking
-##     42       576p  100Hz                     1400x1050 60Hz
-##     43       576p  100Hz H                   1400x1050 75Hz
-##     44       576i  100Hz                     1400x1050 85Hz
-##     45       576i  100Hz H                   1400x1050 120Hz reduced blanking
-##     46       1080i 120Hz                     1440x900        reduced blanking
-##     47       720p  120Hz                     1440x900  60Hz
-##     48       480p  120Hz                     1440x900  75Hz
-##     49       480p  120Hz H                   1440x900  85Hz
-##     50       480i  120Hz                     1440x900  120Hz reduced blanking
-##     51       480i  120Hz H                   1600x1200 60Hz
-##     52       576p  200Hz                     1600x1200 65Hz
-##     53       576p  200Hz H                   1600x1200 70Hz
-##     54       576i  200Hz                     1600x1200 75Hz
-##     55       576i  200Hz H                   1600x1200 85Hz
-##     56       480p  240Hz                     1600x1200 120Hz reduced blanking
-##     57       480p  240Hz H                   1680x1050       reduced blanking
-##     58       480i  240Hz                     1680x1050 60Hz
-##     59       480i  240Hz H                   1680x1050 75Hz
-##     60                                       1680x1050 85Hz
-##     61                                       1680x1050 120Hz reduced blanking
-##     62                                       1792x1344 60Hz
-##     63                                       1792x1344 75Hz
-##     64                                       1792x1344 120Hz reduced blanking
-##     65                                       1856x1392 60Hz
-##     66                                       1856x1392 75Hz
-##     67                                       1856x1392 120Hz reduced blanking
-##     68                                       1920x1200       reduced blanking
-##     69                                       1920x1200 60Hz
-##     70                                       1920x1200 75Hz
-##     71                                       1920x1200 85Hz
-##     72                                       1920x1200 120Hz reduced blanking
-##     73                                       1920x1440 60Hz
-##     74                                       1920x1440 75Hz
-##     75                                       1920x1440 120Hz reduced blanking
-##     76                                       2560x1600       reduced blanking
-##     77                                       2560x1600 60Hz
-##     78                                       2560x1600 75Hz
-##     79                                       2560x1600 85Hz
-##     80                                       2560x1600 120Hz reduced blanking
-##     81                                       1366x768  60Hz
-##     82                                       1080p     60Hz
-##     83                                       1600x900        reduced blanking
-##     84                                       2048x1152       reduced blanking
-##     85                                       720p      60Hz
-##     86                                       1366x768        reduced blanking
-##
-#hdmi_mode=1
-
-## config_hdmi_boost
-##     configure the signal strength of the HDMI interface.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        (Default)
-##     1
-##     2
-##     3
-##     4        Try if you have interference issues with HDMI
-##     5
-##     6
-##     7        Maximum
-##
-#config_hdmi_boost=0
-
-## hdmi_ignore_cec_init
-##     Doesn't sent initial active source message.  Avoids bringing
-##     (CEC enabled) TV out of standby and channel switch when rebooting.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Normal behaviour (Default)
-##     1        Doesn't sent initial active source message
-##
-#hdmi_ignore_cec_init=1
-
-## hdmi_ignore_cec
-##     Pretends CEC is not supported at all by TV.
-##     No CEC functions will be supported.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Normal behaviour (Default)
-##     1        Pretend CEC is not supported by TV
-##
-#hdmi_ignore_cec=1
-
-################################################################################
-##  Overscan Video Settings
-################################################################################
-
-## overscan_left
-##     Number of pixels to skip on left
-##
-#overscan_left=0
-
-## overscan_right
-##     Number of pixels to skip on right
-##
-#overscan_right=0
-
-## overscan_top
-##     Number of pixels to skip on top
-##
-#overscan_top=0
-
-## overscan_bottom
-##     Number of pixels to skip on bottom
-##
-#overscan_bottom=0
-
-## disable_overscan
-##     Set to 1 to disable overscan
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Overscan Enabled (Default)
-##     1        Overscan Disabled
-##
-#disable_overscan=1
-
-################################################################################
-##  Framebuffer Video Settings
-################################################################################
-
-## framebuffer_width
-##     Console framebuffer width in pixels. Default is display width minus
-##     overscan.
-##
-#framebuffer_width=0
-
-## framebuffer_height
-##     Console framebuffer height in pixels. Default is display height minus
-##     overscan.
-##
-#framebuffer_height=0
-
-## framebuffer_depth
-##     Console framebuffer depth in bits per pixel.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     8        Valid, but default RGB palette makes an unreadable screen
-##     16       (Default)
-##     24       Looks better but has corruption issues as of 2012/06/15
-##     32       Has no corruption issues but needs framebuffer_ignore_alpha=1
-##              and shows the wrong colors as of 2012/06/15
-##
-#framebuffer_depth=16
-
-## framebuffer_ignore_alpha
-##     Set to 1 to disable alpha channel. Helps with 32bit.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Enable Alpha Channel (Default)
-##     1        Disable Alpha Channel
-##
-#framebuffer_ignore_alpha=0
-
-################################################################################
-##  General Video Settings
-################################################################################
-
-## display_rotate
-##     Rotate the display clockwise or flip the display.
-##     The 90 and 270 degrees rotation options require additional memory on GPU,
-##     so won't work with the 16M GPU split.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        0 degrees (Default)
-##     1        90 degrees
-##     2        180 degrees
-##     3        270 degrees
-##     0x10000  Horizontal flip
-##     0x20000  Vertical flip
-##
-#display_rotate=0
-
-## dispmanx_offline
-##     Set to "1" to enable offline compositing
-##
-##     Default 0
-##
-#dispmanx_offline=0
-
-################################################################################
-##  Licensed Codecs
-##
-##  Hardware decoding of additional codecs can be enabled by purchasing a
-##  license that is locked to the CPU serial number of your Raspberry Pi.
-##
-##  Up to 8 licenses per CODEC can be specified as a comma seperated list.
-##
-################################################################################
-
-## decode_MPG2
-##     License key to allow hardware MPEG-2 decoding.
-##
-#decode_MPG2=0x12345678
-
-## decode_WVC1
-##     License key to allow hardware VC-1 decoding.
-##
-#decode_WVC1=0x12345678
-
-################################################################################
-##  Camera Settings
-################################################################################
-
-## start_x
-##     Set to "1" to enable the camera module.
-##
-##     Enabling the camera requires gpu_mem option to be specified with a value
-##     of at least 128.
-##
-##     Default 0
-##
-#start_x=0
-
-## disable_camera_led
-##     Turn off the red camera led when recording video or taking a still
-##     picture.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        LED enabled (Default)
-##     1        LED disabled
-##
-#disable_camera_led=1
-
-################################################################################
-##  Test Settings
-################################################################################
-
-## test_mode
-##     Enable test sound/image during boot for manufacturing test.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disable Test Mod (Default)
-##     1        Enable Test Mode
-##
-#test_mode=0
-
-################################################################################
-##  Memory Settings
-################################################################################
-
-## disable_l2cache
-##     Disable arm access to GPU's L2 cache. Needs corresponding L2 disabled
-##     kernel.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Enable L2 Cache (Default)
-##     1        Disable L2 cache
-##
-#disable_l2cache=0
-
-## gpu_mem
-##     GPU memory allocation in MB for all board revisions.
-##
-##     Default 64
-##
-gpu_mem=128
-
-## gpu_mem_256
-##     GPU memory allocation in MB for 256MB board revision.
-##     This option overrides gpu_mem.
-##
-#gpu_mem_256=192
-
-## gpu_mem_512
-##     GPU memory allocation in MB for 512MB board revision.
-##     This option overrides gpu_mem.
-##
-#gpu_mem_512=448
-
-## gpu_mem_1024
-##     GPU memory allocation in MB for 1024MB board revision.
-##     This option overrides gpu_mem.
-##
-#gpu_mem_1024=944
-
-## disable_pvt
-##     Disable adjusting the refresh rate of RAM every 500ms
-##     (measuring RAM temparature).
-##
-#disable_pvt=1
-
-################################################################################
-##  CMA - Dynamic Memory Split
-##
-##  CMA enables dynamic management of the ARM and GPU memory split at runtime.
-##
-##  The following options need to be in cmdline.txt for CMA to work:
-##    coherent_pool=6M smsc95xx.turbo_mode=N
-##
-################################################################################
-
-## cma_lwm
-##     When GPU has less than cma_lwm (low water mark) memory available it
-##     will request some from ARM.
-##
-#cma_lwm=16
-
-## cma_hwm
-##     When GPU has more than cma_hwm (high water mark) memory available it
-##     will release some to ARM.
-##
-#cma_hwm=32
-
-################################################################################
-##  Boot Option Settings
-################################################################################
-
-## disable_commandline_tags
-##     Stop start.elf from filling in ATAGS (memory from 0x100) before
-##     launching kernel
-##
-#disable_commandline_tags=0
-
-## cmdline (string)
-##     Command line parameters. Can be used instead of cmdline.txt file
-##
-#cmdline=""
-
-## kernel (string)
-##     Alternative name to use when loading kernel.
-##
-#kernel=""
-
-## kernel_address
-##     Address to load kernel.img file at
-##
-#kernel_address=0x00000000
-
-## kernel_old
-##     Support loading old kernels
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disabled (Default)
-##     1        Load kernel at address 0x00000000
-##
-#kernel_old=1
-
-## ramfsfile (string)
-##     ramfs file to load
-##
-#ramfsfile=""
-
-## ramfsaddr
-##     Address to load ramfs file at
-##
-#ramfsaddr=0x00000000
-
-## initramfs (string address)
-##     ramfs file and address to load it at (it's like ramfsfile+ramfsaddr in
-##     one option).
-##
-##     NOTE: this option uses different syntax than all other options - you
-##           should not use "=" character here.
-##
-#initramfs initramf.gz 0x00800000
-
-## device_tree_address
-##     Address to load device_tree at
-##
-#device_tree_address=0x00000000
-
-## init_uart_baud
-##     Initial uart baud rate.
-##
-##     Default 115200
-##
-#init_uart_baud=115200
-
-## init_uart_clock
-##     Initial uart clock.
-##
-##     Default 3000000 (3MHz)
-##
-#init_uart_clock=3000000
-
-## init_emmc_clock
-##     Initial emmc clock, increasing this can speedup your SD-card.
-##
-##     Default 100000000 (100mhz)
-##
-#init_emmc_clock=100000000
-
-## boot_delay
-##     Wait for a given number of seconds in start.elf before loading
-##     kernel.img.
-##
-##     delay = (1000 * boot_delay) + boot_delay_ms
-##
-##     Default 1
-##
-#boot_delay=0
-
-## boot_delay_ms
-##     Wait for a given number of milliseconds in start.elf before loading
-##     kernel.img.
-##
-##     delay = (1000 * boot_delay) + boot_delay_ms
-##
-##     Default 0
-##
-#boot_delay_ms=0
-
-## avoid_safe_mode
-##     Adding a jumper between pins 5 & 6 of P1 enables a recovery Safe Mode.
-##     If pins 5 & 6 are used for connecting to external devices (e.g. GPIO),
-##     then this setting can be used to ensure Safe Mode is not triggered.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Respect Safe Mode input (Default)
-##     1        Ignore Safe Mode input
-##
-#avoid_safe_mode=1
-
-## disable_splash
-##     Avoids the rainbow splash screen on boot.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Splash screen enabled (Default)
-##     1        Splash screen disabled
-##
-#disable_splash=1
-
-################################################################################
-##  Overclocking Settings
-##
-##  ARM, SDRAM and GPU each have their own PLLs and can have unrelated
-##  frequencies.
-##
-##  The GPU core, h264, v3d and isp share a PLL, so need to have related
-##  frequencies.
-##  pll_freq = floor(2400 / (2 * core_freq)) * (2 * core_freq)
-##  gpu_freq = pll_freq / [even number]
-##
-##  The effective gpu_freq is automatically rounded to nearest even integer, so
-##  asking for core_freq = 500 and gpu_freq = 300 will result in divisor of
-##  2000/300 = 6.666 => 6 and so 333.33MHz.
-##
-##
-##  Standard Profiles:
-##                  arm_freq    core_freq    sdram_freq    over_voltage
-##     -------------------------------------------------------------------------
-##     None         700         250          400           0
-##     Modest       800         300          400           0
-##     Medium       900         333          450           2
-##     High         950         450          450           6
-##     Turbo        1000        500          500           6
-##
-################################################################################
-
-## force_turbo
-##     Control the kernel "ondemand" governor. It has no effect if no overclock
-##     settings are specified.
-##     May set warrany bit.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Enable dynamic clocks and voltage for the ARM core, GPU core and
-##              SDRAM (Default).
-##              Overclocking of h264_freq, v3d_freq and isp_freq is ignored.
-##     1        Disable dynamic clocks and voltage for the ARM core, GPU core
-##              and SDRAM.
-##              Overclocking of h264_freq, v3d_freq and isp_freq is allowed.
-##
-#force_turbo=0
-
-## initial_turbo
-##     Enables turbo mode from boot for the given value in seconds (up to 60)
-##     or until cpufreq sets a frequency. Can help with sdcard corruption if
-##     overclocked.
-##
-##     Default 0
-##
-#initial_turbo=0
-
-## temp_limit
-##     Overheat protection. Sets clocks and voltages to default when the SoC
-##     reaches this Celsius value.
-##     Setting this higher than default voids warranty.
-##
-##     Default 85
-##
-#temp_limit=85
-
-## arm_freq
-##     Frequency of ARM in MHz.
-##
-##     Default 700.
-##
-arm_freq=900
-
-## arm_freq_min
-##     Minimum frequency of ARM in MHz (used for dynamic clocking).
-##
-##     Default 700.
-##
-#arm_freq_min=700
-
-## gpu_freq
-##     Sets core_freq, h264_freq, isp_freq, v3d_freq together.
-##
-##     Default 250.
-##
-#gpu_freq=250
-
-## core_freq
-##     Frequency of GPU processor core in MHz. It has an impact on ARM
-##     performance since it drives L2 cache.
-##
-##     Default 250.
-##
-#core_freq=250
-
-## core_freq_min
-##     Minimum frequency of GPU processor core in MHz (used for dynamic
-##     clocking). It has an impact on ARM performance since it drives L2 cache.
-##
-##     Default 250.
-##
-#core_freq_min=250
-
-## h264_freq
-##     Frequency of hardware video block in MHz.
-##
-##     Default 250.
-##
-#h264_freq=250
-
-## isp_freq
-##     Frequency of image sensor pipeline block in MHz.
-##
-##     Default 250.
-##
-#isp_freq=250
-
-## v3d_freq
-##     Frequency of 3D block in MHz.
-##
-##     Default 250.
-##
-#v3d_freq=250
-
-## sdram_freq
-##     Frequency of SDRAM in MHz.
-##
-##     Default 400.
-##
-#sdram_freq=400
-
-## sdram_freq_min
-##     Minimum frequency of SDRAM in MHz (used for dynamic clocking).
-##
-##     Default 400.
-##
-#sdram_freq_min=400
-
-## avoid_pwm_pll
-##     Don't dedicate a pll to PWM audio. This will reduce analogue audio
-##     quality slightly. The spare PLL allows the core_freq to be set
-##     independently from the rest of the gpu allowing more control over
-##     overclocking.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Linked core_freq (Default)
-##     1        Unlinked core_freq
-##
-#avoid_pwm_pll=1
-
-################################################################################
-##  Voltage Settings
-################################################################################
-
-## current_limit_override
-##     Disables SMPS current limit protection. Can help if you are currently
-##     hitting a reboot failure when overclocking too high.
-##     May set warrany bit.
-##
-#current_limit_override=0x5A000020
-
-## over_voltage
-##     ARM/GPU core voltage adjust.
-##     May set warrany bit.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V (requires force_turbo=1 or current_limit_override)
-##     8        1.4   V (requires force_turbo=1 or current_limit_override)
-##
-#over_voltage=0
-
-## over_voltage_min
-##     Minimum ARM/GPU core voltage adjust (used for dynamic clocking).
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V (requires force_turbo=1)
-##     8        1.4   V (requires force_turbo=1)
-##
-#over_voltage_min=0
-
-## over_voltage_sdram
-##     Sets over_voltage_sdram_c, over_voltage_sdram_i, over_voltage_sdram_p
-##     together
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V
-##     8        1.4   V
-##
-#over_voltage_sdram=0
-
-## over_voltage_sdram_c
-##     SDRAM controller voltage adjust.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V
-##     8        1.4   V
-##
-#over_voltage_sdram_c=0
-
-## over_voltage_sdram_i
-##     SDRAM I/O voltage adjust.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V
-##     8        1.4   V
-##
-#over_voltage_sdram_i=0
-
-## over_voltage_sdram_p
-##     SDRAM phy voltage adjust.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V
-##     8        1.4   V
-##
-#over_voltage_sdram_p=0
-
-################################################################################
-##  USB Power
-################################################################################
-
-## max_usb_current
-##     When set to 1, change the output current limit (for all 4 USB
-##     ports combined) from 600mA to double that, 1200mA.
-##
-##     This option is not available for Model A/B boards.
-##
-##     Default 0.
-##
-#max_usb_current=0
-
-################################################################################
-##  Base Device Tree Parameters
-################################################################################
-
-## audio
-##     Enable the onboard ALSA audio
-##
-##     Default off.
-##
-dtparam=audio=on
-
-## i2c_arm
-##     Enable the ARM's i2c interface
-##
-##     Default off.
-##
-#dtparam=i2c_arm=off
-
-## i2c_vc
-##     Enable the i2c interface
-##
-##     Usually reserved for the VideoCore processor
-##
-##     Default off.
-##
-#dtparam=i2c_vc=off
-
-## i2c_arm_baudrate
-##     Set the baudrate of the ARM's i2c interface
-##
-##     Default 100000.
-##
-#dtparam=i2c_arm_baudrate=100000
-
-## i2c_vc_baudrate
-##     Set the baudrate of the VideoCore i2c interface
-##
-##     Default 100000.
-##
-#dtparam=i2c_vc_baudrate=100000
-
-## i2s
-##     Set to "on" to enable the i2s interface
-##
-##     Default off.
-##
-#dtparam=i2s=off
-
-## spi
-##     Set to "on" to enable the spi interfaces
-##
-##     Default off.
-##
-#dtparam=spi=off
-
-## random
-##     Set to "on" to enable the hardware random
-##
-##     Default off.
-##
-#dtparam=random=off
-
-## uart0
-##     Set to "off" to disable uart0
-##
-##     Default on.
-##
-#dtparam=uart0=on
-
-## watchdog
-##     Set to "on" to enable the hardware watchdog
-##
-##     Default off.
-##
-#dtparam=watchdog=off
-
-## act_led_trigger
-##     Choose which activity the LED tracks.
-##
-##     Use "heartbeat" for a nice load indicator.
-##
-##     Default mmc.
-##
-#dtparam=act_led_trigger=mmc
-
-## act_led_activelow
-##     Set to "on" to invert the sense of the LED
-##
-##     Default off.
-##
-#dtparam=act_led_activelow=off
-
-## act_led_gpio
-##     Set which GPIO to use for the activity LED
-##
-##     In case you want to connect it to an external device
-##
-##     Default 16 on a non-Plus board, 47 on a Plus or Pi 2.
-##
-#dtparam=act_led_gpio=47
-
-## pwr_led_trigger
-##     Choose which activity the LED tracks.
-##
-##     Use "heartbeat" for a nice load indicator.
-##
-##     Not available on Model A/B boards.
-##
-##     Default mmc.
-##
-#dtparam=pwr_led_trigger=mmc
-
-## pwr_led_activelow
-##     Set to "on" to invert the sense of the LED
-##
-##     Not available on Model A/B boards.
-##
-##     Default off.
-##
-#dtparam=pwr_led_activelow=off
-
-## pwr_led_gpio
-##     Set which GPIO to use for the PWR LED
-##
-##     In case you want to connect it to an external device
-##
-##     Not available on Model A/B boards.
-##
-##     Default 35.
-##
-#dtparam=pwr_led_gpio=35
diff --git a/rpi2/10-monitor.conf b/rpi2/10-monitor.conf
deleted file mode 100644
index 6b319d7..0000000
--- a/rpi2/10-monitor.conf
+++ /dev/null
@@ -1,3 +0,0 @@
-Section "Extensions"
-    Option      "DPMS" "Disable"
-EndSection
diff --git a/rpi2/bcm2836-rpi-2-b.dtb b/rpi2/bcm2836-rpi-2-b.dtb
deleted file mode 100755
index 06ba65b..0000000
--- a/rpi2/bcm2836-rpi-2-b.dtb
+++ /dev/null
diff --git a/rpi2/bcm2837-rpi-3-b-plus.dtb b/rpi2/bcm2837-rpi-3-b-plus.dtb
deleted file mode 100755
index 9fa2dd4..0000000
--- a/rpi2/bcm2837-rpi-3-b-plus.dtb
+++ /dev/null
diff --git a/rpi2/bcm2837-rpi-3-b.dtb b/rpi2/bcm2837-rpi-3-b.dtb
deleted file mode 100755
index 7ed21fb..0000000
--- a/rpi2/bcm2837-rpi-3-b.dtb
+++ /dev/null
diff --git a/rpi2/boot.cmd b/rpi2/boot.cmd
deleted file mode 100644
index cf2b8ea..0000000
--- a/rpi2/boot.cmd
+++ /dev/null
@@ -1,5 +0,0 @@
-fatload mmc 0:1 ${kernel_addr_r} vmlinuz
-fatload mmc 0:1 ${fdt_addr} bcm2837-rpi-3-b.dtb
-fatload mmc 0:1 ${ramdisk_addr_r} initrd.img
-setenv bootargs console=ttyAMA0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait panic=10
-bootz ${kernel_addr_r} ${ramdisk_addr_r} ${fdt_addr}
diff --git a/rpi2/config.txt b/rpi2/config.txt
deleted file mode 100644
index a27b5de..0000000
--- a/rpi2/config.txt
+++ /dev/null
@@ -1,1193 +0,0 @@
-################################################################################
-##  Raspberry Pi Configuration Settings
-##
-##  Revision 16, 2013/06/22
-##
-##  Details taken from the eLinux wiki
-##  For up-to-date information please refer to wiki page.
-##
-##  Wiki Location : http://elinux.org/RPiconfig
-##
-##
-##  Description:
-##    Details of each setting are described with each section that begins with
-##    a double hashed comment ('##')
-##    It is up to the user to remove the single hashed comment ('#') from each
-##    option they want to enable, and to set the specific value of that option.
-##
-##  Overclock settings will be disabled at runtime if the SoC reaches temp_limit
-##
-################################################################################
-
-#dtoverlay=vc4-kms-v3d,cma-128
-
-
-
-
-
-################################################################################
-##  Standard Definition Video Settings
-################################################################################
-
-## sdtv_mode
-##     defines the TV standard for composite output
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Normal NTSC (Default)
-##     1        Japanese version of NTSC - no pedestal
-##     2        Normal PAL
-##     3        Brazilian version of PAL - 525/60 rather than 625/50, different
-##              subcarrier
-##
-#sdtv_mode=0
-
-## sdtv_aspect
-##     defines the aspect ratio for composite output
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     1        4:3 (Default)
-##     2        14:9
-##     3        16:9
-##
-sdtv_aspect=3
-
-## sdtv_disable_colourburst
-##     Disables colour burst on composite output. The picture will be
-##     monochrome, but possibly sharper
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Colour burst is enabled (Default)
-##     1        Colour burst is disabled
-##
-#sdtv_disable_colourburst=1
-
-################################################################################
-##  High Definition Video Settings
-################################################################################
-
-## hdmi_safe
-##     Use "safe mode" settings to try to boot with maximum hdmi compatibility.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disabled (Default)
-##     1        Enabled (this does: hdmi_force_hotplug=1,
-##                                  hdmi_ignore_edid=0xa5000080,
-##                                  config_hdmi_boost=4, hdmi_group=2,
-##                                  hdmi_mode=4, disable_overscan=0,
-##                                  overscan_left=24, overscan_right=24,
-##                                  overscan_top=24, overscan_bottom=24)
-##
-#hdmi_safe=1
-
-## hdmi_force_hotplug
-##     Pretends HDMI hotplug signal is asserted so it appears a HDMI display
-##     is attached
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disabled (Default)
-##     1        Use HDMI mode even if no HDMI monitor is detected
-##
-#hdmi_force_hotplug=1
-
-## hdmi_ignore_hotplug
-##     Pretends HDMI hotplug signal is not asserted so it appears a HDMI
-##     display is not attached
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disabled (Default)
-##     1        Use composite mode even if HDMI monitor is detected
-##
-#hdmi_ignore_hotplug=1
-
-## hdmi_drive
-##     chooses between HDMI and DVI modes
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     1        Normal DVI mode (No sound)
-##     2        Normal HDMI mode (Sound will be sent if supported and enabled)
-##
-#hdmi_drive=2
-
-## hdmi_ignore_edid
-##     Enables the ignoring of EDID/display data
-##
-#hdmi_ignore_edid=0xa5000080
-
-## hdmi_edid_file
-##     Read the EDID data from the edid.dat file instead of from the attached
-##     device
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Read EDID data from attached device (Default)
-##     1        Read EDID data from edid.txt file
-##
-#hdmi_edid_file=1
-
-## hdmi_ignore_edid_audio
-##     Pretends all audio formats are unsupported by display. This means ALSA
-##     will default to analogue.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use EDID provided values (Default)
-##     1        Pretend all audio formats are unsupported
-##
-#hdmi_ignore_edid_audio=1
-
-## hdmi_force_edid_audio
-##     Pretends all audio formats are supported by display, allowing
-##     passthrough of DTS/AC3 even when not reported as supported.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use EDID provided values (Default)
-##     1        Pretend all audio formats are supported
-##
-#hdmi_force_edid_audio=1
-
-## hdmi_force_edid_3d
-##     Pretends all CEA modes support 3D even when edid doesn't indicate
-##     support for them.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use EDID provided values (Default)
-##     1        Pretend 3D mode is supported
-##
-#hdmi_force_edid_3d=1
-
-## avoid_edid_fuzzy_match
-##     Avoid fuzzy matching of modes described in edid.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use fuzzy matching (Default)
-##     1        Avoid fuzzy matching
-##
-#avoid_edid_fuzzy_match=1
-
-## hdmi_pixel_encoding
-##     Force the pixel encoding mode.
-##     By default it will use the mode requested from edid so shouldn't
-##     need changing.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use EDID provided values (Default)
-##     1        RGB limited   (16-235)
-##     2        RGB full      ( 0-255)
-##     3        YCbCr limited (16-235)
-##     4        YCbCr limited ( 0-255)
-##
-#hdmi_pixel_encoding=1
-
-## hdmi_group
-##     Defines the HDMI type
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Use the preferred group reported by the edid (Default)
-##     1        CEA
-##     2        DMT
-##
-#hdmi_group=1
-
-## hdmi_mode
-##     defines screen resolution in CEA or DMT format
-##
-##     H means 16:9 variant (of a normally 4:3 mode).
-##     2x means pixel doubled (i.e. higher clock rate, with each pixel repeated
-##                                  twice)
-##     4x means pixel quadrupled (i.e. higher clock rate, with each pixel
-##                                     repeated four times)
-##     reduced blanking means fewer bytes are used for blanking within the data
-##                      stream (i.e. lower clock rate, with fewer wasted bytes)
-##
-##     Value    hdmi_group=CEA                  hdmi_group=DMT
-##     -------------------------------------------------------------------------
-##     1        VGA                             640x350   85Hz
-##     2        480p  60Hz                      640x400   85Hz
-##     3        480p  60Hz  H                   720x400   85Hz
-##     4        720p  60Hz                      640x480   60Hz
-##     5        1080i 60Hz                      640x480   72Hz
-##     6        480i  60Hz                      640x480   75Hz
-##     7        480i  60Hz  H                   640x480   85Hz
-##     8        240p  60Hz                      800x600   56Hz
-##     9        240p  60Hz  H                   800x600   60Hz
-##     10       480i  60Hz  4x                  800x600   72Hz
-##     11       480i  60Hz  4x H                800x600   75Hz
-##     12       240p  60Hz  4x                  800x600   85Hz
-##     13       240p  60Hz  4x H                800x600   120Hz
-##     14       480p  60Hz  2x                  848x480   60Hz
-##     15       480p  60Hz  2x H                1024x768  43Hz  DO NOT USE
-##     16       1080p 60Hz                      1024x768  60Hz
-##     17       576p  50Hz                      1024x768  70Hz
-##     18       576p  50Hz  H                   1024x768  75Hz
-##     19       720p  50Hz                      1024x768  85Hz
-##     20       1080i 50Hz                      1024x768  120Hz
-##     21       576i  50Hz                      1152x864  75Hz
-##     22       576i  50Hz  H                   1280x768        reduced blanking
-##     23       288p  50Hz                      1280x768  60Hz
-##     24       288p  50Hz  H                   1280x768  75Hz
-##     25       576i  50Hz  4x                  1280x768  85Hz
-##     26       576i  50Hz  4x H                1280x768  120Hz reduced blanking
-##     27       288p  50Hz  4x                  1280x800        reduced blanking
-##     28       288p  50Hz  4x H                1280x800  60Hz
-##     29       576p  50Hz  2x                  1280x800  75Hz
-##     30       576p  50Hz  2x H                1280x800  85Hz
-##     31       1080p 50Hz                      1280x800  120Hz reduced blanking
-##     32       1080p 24Hz                      1280x960  60Hz
-##     33       1080p 25Hz                      1280x960  85Hz
-##     34       1080p 30Hz                      1280x960  120Hz reduced blanking
-##     35       480p  60Hz  4x                  1280x1024 60Hz
-##     36       480p  60Hz  4x H                1280x1024 75Hz
-##     37       576p  50Hz  4x                  1280x1024 85Hz
-##     38       576p  50Hz  4x H                1280x1024 120Hz reduced blanking
-##     39       1080i 50Hz  reduced blanking    1360x768  60Hz
-##     40       1080i 100Hz                     1360x768  120Hz reduced blanking
-##     41       720p  100Hz                     1400x1050       reduced blanking
-##     42       576p  100Hz                     1400x1050 60Hz
-##     43       576p  100Hz H                   1400x1050 75Hz
-##     44       576i  100Hz                     1400x1050 85Hz
-##     45       576i  100Hz H                   1400x1050 120Hz reduced blanking
-##     46       1080i 120Hz                     1440x900        reduced blanking
-##     47       720p  120Hz                     1440x900  60Hz
-##     48       480p  120Hz                     1440x900  75Hz
-##     49       480p  120Hz H                   1440x900  85Hz
-##     50       480i  120Hz                     1440x900  120Hz reduced blanking
-##     51       480i  120Hz H                   1600x1200 60Hz
-##     52       576p  200Hz                     1600x1200 65Hz
-##     53       576p  200Hz H                   1600x1200 70Hz
-##     54       576i  200Hz                     1600x1200 75Hz
-##     55       576i  200Hz H                   1600x1200 85Hz
-##     56       480p  240Hz                     1600x1200 120Hz reduced blanking
-##     57       480p  240Hz H                   1680x1050       reduced blanking
-##     58       480i  240Hz                     1680x1050 60Hz
-##     59       480i  240Hz H                   1680x1050 75Hz
-##     60                                       1680x1050 85Hz
-##     61                                       1680x1050 120Hz reduced blanking
-##     62                                       1792x1344 60Hz
-##     63                                       1792x1344 75Hz
-##     64                                       1792x1344 120Hz reduced blanking
-##     65                                       1856x1392 60Hz
-##     66                                       1856x1392 75Hz
-##     67                                       1856x1392 120Hz reduced blanking
-##     68                                       1920x1200       reduced blanking
-##     69                                       1920x1200 60Hz
-##     70                                       1920x1200 75Hz
-##     71                                       1920x1200 85Hz
-##     72                                       1920x1200 120Hz reduced blanking
-##     73                                       1920x1440 60Hz
-##     74                                       1920x1440 75Hz
-##     75                                       1920x1440 120Hz reduced blanking
-##     76                                       2560x1600       reduced blanking
-##     77                                       2560x1600 60Hz
-##     78                                       2560x1600 75Hz
-##     79                                       2560x1600 85Hz
-##     80                                       2560x1600 120Hz reduced blanking
-##     81                                       1366x768  60Hz
-##     82                                       1080p     60Hz
-##     83                                       1600x900        reduced blanking
-##     84                                       2048x1152       reduced blanking
-##     85                                       720p      60Hz
-##     86                                       1366x768        reduced blanking
-##
-#hdmi_mode=1
-
-## config_hdmi_boost
-##     configure the signal strength of the HDMI interface.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        (Default)
-##     1
-##     2
-##     3
-##     4        Try if you have interference issues with HDMI
-##     5
-##     6
-##     7        Maximum
-##
-#config_hdmi_boost=0
-
-## hdmi_ignore_cec_init
-##     Doesn't sent initial active source message.  Avoids bringing
-##     (CEC enabled) TV out of standby and channel switch when rebooting.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Normal behaviour (Default)
-##     1        Doesn't sent initial active source message
-##
-#hdmi_ignore_cec_init=1
-
-## hdmi_ignore_cec
-##     Pretends CEC is not supported at all by TV.
-##     No CEC functions will be supported.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Normal behaviour (Default)
-##     1        Pretend CEC is not supported by TV
-##
-#hdmi_ignore_cec=1
-
-################################################################################
-##  Overscan Video Settings
-################################################################################
-
-## overscan_left
-##     Number of pixels to skip on left
-##
-#overscan_left=0
-
-## overscan_right
-##     Number of pixels to skip on right
-##
-#overscan_right=0
-
-## overscan_top
-##     Number of pixels to skip on top
-##
-#overscan_top=0
-
-## overscan_bottom
-##     Number of pixels to skip on bottom
-##
-#overscan_bottom=0
-
-## disable_overscan
-##     Set to 1 to disable overscan
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Overscan Enabled (Default)
-##     1        Overscan Disabled
-##
-#disable_overscan=1
-
-################################################################################
-##  Framebuffer Video Settings
-################################################################################
-
-## framebuffer_width
-##     Console framebuffer width in pixels. Default is display width minus
-##     overscan.
-##
-#framebuffer_width=0
-
-## framebuffer_height
-##     Console framebuffer height in pixels. Default is display height minus
-##     overscan.
-##
-#framebuffer_height=0
-
-## framebuffer_depth
-##     Console framebuffer depth in bits per pixel.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     8        Valid, but default RGB palette makes an unreadable screen
-##     16       (Default)
-##     24       Looks better but has corruption issues as of 2012/06/15
-##     32       Has no corruption issues but needs framebuffer_ignore_alpha=1
-##              and shows the wrong colors as of 2012/06/15
-##
-#framebuffer_depth=16
-
-## framebuffer_ignore_alpha
-##     Set to 1 to disable alpha channel. Helps with 32bit.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Enable Alpha Channel (Default)
-##     1        Disable Alpha Channel
-##
-#framebuffer_ignore_alpha=0
-
-################################################################################
-##  General Video Settings
-################################################################################
-
-## display_rotate
-##     Rotate the display clockwise or flip the display.
-##     The 90 and 270 degrees rotation options require additional memory on GPU,
-##     so won't work with the 16M GPU split.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        0 degrees (Default)
-##     1        90 degrees
-##     2        180 degrees
-##     3        270 degrees
-##     0x10000  Horizontal flip
-##     0x20000  Vertical flip
-##
-#display_rotate=0
-
-## dispmanx_offline
-##     Set to "1" to enable offline compositing
-##
-##     Default 0
-##
-#dispmanx_offline=0
-
-################################################################################
-##  Licensed Codecs
-##
-##  Hardware decoding of additional codecs can be enabled by purchasing a
-##  license that is locked to the CPU serial number of your Raspberry Pi.
-##
-##  Up to 8 licenses per CODEC can be specified as a comma seperated list.
-##
-################################################################################
-
-## decode_MPG2
-##     License key to allow hardware MPEG-2 decoding.
-##
-#decode_MPG2=0x12345678
-
-## decode_WVC1
-##     License key to allow hardware VC-1 decoding.
-##
-#decode_WVC1=0x12345678
-
-################################################################################
-##  Camera Settings
-################################################################################
-
-## start_x
-##     Set to "1" to enable the camera module.
-##
-##     Enabling the camera requires gpu_mem option to be specified with a value
-##     of at least 128.
-##
-##     Default 0
-##
-#start_x=0
-
-## disable_camera_led
-##     Turn off the red camera led when recording video or taking a still
-##     picture.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        LED enabled (Default)
-##     1        LED disabled
-##
-#disable_camera_led=1
-
-################################################################################
-##  Test Settings
-################################################################################
-
-## test_mode
-##     Enable test sound/image during boot for manufacturing test.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disable Test Mod (Default)
-##     1        Enable Test Mode
-##
-#test_mode=0
-
-################################################################################
-##  Memory Settings
-################################################################################
-
-## disable_l2cache
-##     Disable arm access to GPU's L2 cache. Needs corresponding L2 disabled
-##     kernel.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Enable L2 Cache (Default)
-##     1        Disable L2 cache
-##
-#disable_l2cache=0
-
-## gpu_mem
-##     GPU memory allocation in MB for all board revisions.
-##
-##     Default 64
-##
-gpu_mem=128
-
-## gpu_mem_256
-##     GPU memory allocation in MB for 256MB board revision.
-##     This option overrides gpu_mem.
-##
-#gpu_mem_256=192
-
-## gpu_mem_512
-##     GPU memory allocation in MB for 512MB board revision.
-##     This option overrides gpu_mem.
-##
-#gpu_mem_512=448
-
-## gpu_mem_1024
-##     GPU memory allocation in MB for 1024MB board revision.
-##     This option overrides gpu_mem.
-##
-#gpu_mem_1024=944
-
-## disable_pvt
-##     Disable adjusting the refresh rate of RAM every 500ms
-##     (measuring RAM temparature).
-##
-#disable_pvt=1
-
-################################################################################
-##  CMA - Dynamic Memory Split
-##
-##  CMA enables dynamic management of the ARM and GPU memory split at runtime.
-##
-##  The following options need to be in cmdline.txt for CMA to work:
-##    coherent_pool=6M smsc95xx.turbo_mode=N
-##
-################################################################################
-
-## cma_lwm
-##     When GPU has less than cma_lwm (low water mark) memory available it
-##     will request some from ARM.
-##
-#cma_lwm=16
-
-## cma_hwm
-##     When GPU has more than cma_hwm (high water mark) memory available it
-##     will release some to ARM.
-##
-#cma_hwm=32
-
-################################################################################
-##  Boot Option Settings
-################################################################################
-
-## disable_commandline_tags
-##     Stop start.elf from filling in ATAGS (memory from 0x100) before
-##     launching kernel
-##
-#disable_commandline_tags=0
-
-## cmdline (string)
-##     Command line parameters. Can be used instead of cmdline.txt file
-##
-#cmdline=""
-
-## kernel (string)
-##     Alternative name to use when loading kernel.
-##
-#kernel=""
-
-## kernel_address
-##     Address to load kernel.img file at
-##
-#kernel_address=0x00000000
-
-## kernel_old
-##     Support loading old kernels
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Disabled (Default)
-##     1        Load kernel at address 0x00000000
-##
-#kernel_old=1
-
-## ramfsfile (string)
-##     ramfs file to load
-##
-#ramfsfile=""
-
-## ramfsaddr
-##     Address to load ramfs file at
-##
-#ramfsaddr=0x00000000
-
-## initramfs (string address)
-##     ramfs file and address to load it at (it's like ramfsfile+ramfsaddr in
-##     one option).
-##
-##     NOTE: this option uses different syntax than all other options - you
-##           should not use "=" character here.
-##
-#initramfs initramf.gz 0x00800000
-
-## device_tree_address
-##     Address to load device_tree at
-##
-#device_tree_address=0x00000000
-
-## init_uart_baud
-##     Initial uart baud rate.
-##
-##     Default 115200
-##
-#init_uart_baud=115200
-
-## init_uart_clock
-##     Initial uart clock.
-##
-##     Default 3000000 (3MHz)
-##
-#init_uart_clock=3000000
-
-## init_emmc_clock
-##     Initial emmc clock, increasing this can speedup your SD-card.
-##
-##     Default 100000000 (100mhz)
-##
-#init_emmc_clock=100000000
-
-## boot_delay
-##     Wait for a given number of seconds in start.elf before loading
-##     kernel.img.
-##
-##     delay = (1000 * boot_delay) + boot_delay_ms
-##
-##     Default 1
-##
-#boot_delay=0
-
-## boot_delay_ms
-##     Wait for a given number of milliseconds in start.elf before loading
-##     kernel.img.
-##
-##     delay = (1000 * boot_delay) + boot_delay_ms
-##
-##     Default 0
-##
-#boot_delay_ms=0
-
-## avoid_safe_mode
-##     Adding a jumper between pins 5 & 6 of P1 enables a recovery Safe Mode.
-##     If pins 5 & 6 are used for connecting to external devices (e.g. GPIO),
-##     then this setting can be used to ensure Safe Mode is not triggered.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Respect Safe Mode input (Default)
-##     1        Ignore Safe Mode input
-##
-#avoid_safe_mode=1
-
-## disable_splash
-##     Avoids the rainbow splash screen on boot.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Splash screen enabled (Default)
-##     1        Splash screen disabled
-##
-#disable_splash=1
-
-################################################################################
-##  Overclocking Settings
-##
-##  ARM, SDRAM and GPU each have their own PLLs and can have unrelated
-##  frequencies.
-##
-##  The GPU core, h264, v3d and isp share a PLL, so need to have related
-##  frequencies.
-##  pll_freq = floor(2400 / (2 * core_freq)) * (2 * core_freq)
-##  gpu_freq = pll_freq / [even number]
-##
-##  The effective gpu_freq is automatically rounded to nearest even integer, so
-##  asking for core_freq = 500 and gpu_freq = 300 will result in divisor of
-##  2000/300 = 6.666 => 6 and so 333.33MHz.
-##
-##
-##  Standard Profiles:
-##                  arm_freq    core_freq    sdram_freq    over_voltage
-##     -------------------------------------------------------------------------
-##     None         700         250          400           0
-##     Modest       800         300          400           0
-##     Medium       900         333          450           2
-##     High         950         450          450           6
-##     Turbo        1000        500          500           6
-##
-################################################################################
-
-## force_turbo
-##     Control the kernel "ondemand" governor. It has no effect if no overclock
-##     settings are specified.
-##     May set warrany bit.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Enable dynamic clocks and voltage for the ARM core, GPU core and
-##              SDRAM (Default).
-##              Overclocking of h264_freq, v3d_freq and isp_freq is ignored.
-##     1        Disable dynamic clocks and voltage for the ARM core, GPU core
-##              and SDRAM.
-##              Overclocking of h264_freq, v3d_freq and isp_freq is allowed.
-##
-#force_turbo=0
-
-## initial_turbo
-##     Enables turbo mode from boot for the given value in seconds (up to 60)
-##     or until cpufreq sets a frequency. Can help with sdcard corruption if
-##     overclocked.
-##
-##     Default 0
-##
-#initial_turbo=0
-
-## temp_limit
-##     Overheat protection. Sets clocks and voltages to default when the SoC
-##     reaches this Celsius value.
-##     Setting this higher than default voids warranty.
-##
-##     Default 85
-##
-#temp_limit=85
-
-## arm_freq
-##     Frequency of ARM in MHz.
-##
-##     Default 700.
-##
-arm_freq=900
-
-## arm_freq_min
-##     Minimum frequency of ARM in MHz (used for dynamic clocking).
-##
-##     Default 700.
-##
-#arm_freq_min=700
-
-## gpu_freq
-##     Sets core_freq, h264_freq, isp_freq, v3d_freq together.
-##
-##     Default 250.
-##
-#gpu_freq=250
-
-## core_freq
-##     Frequency of GPU processor core in MHz. It has an impact on ARM
-##     performance since it drives L2 cache.
-##
-##     Default 250.
-##
-#core_freq=250
-
-## core_freq_min
-##     Minimum frequency of GPU processor core in MHz (used for dynamic
-##     clocking). It has an impact on ARM performance since it drives L2 cache.
-##
-##     Default 250.
-##
-#core_freq_min=250
-
-## h264_freq
-##     Frequency of hardware video block in MHz.
-##
-##     Default 250.
-##
-#h264_freq=250
-
-## isp_freq
-##     Frequency of image sensor pipeline block in MHz.
-##
-##     Default 250.
-##
-#isp_freq=250
-
-## v3d_freq
-##     Frequency of 3D block in MHz.
-##
-##     Default 250.
-##
-#v3d_freq=250
-
-## sdram_freq
-##     Frequency of SDRAM in MHz.
-##
-##     Default 400.
-##
-#sdram_freq=400
-
-## sdram_freq_min
-##     Minimum frequency of SDRAM in MHz (used for dynamic clocking).
-##
-##     Default 400.
-##
-#sdram_freq_min=400
-
-## avoid_pwm_pll
-##     Don't dedicate a pll to PWM audio. This will reduce analogue audio
-##     quality slightly. The spare PLL allows the core_freq to be set
-##     independently from the rest of the gpu allowing more control over
-##     overclocking.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     0        Linked core_freq (Default)
-##     1        Unlinked core_freq
-##
-#avoid_pwm_pll=1
-
-################################################################################
-##  Voltage Settings
-################################################################################
-
-## current_limit_override
-##     Disables SMPS current limit protection. Can help if you are currently
-##     hitting a reboot failure when overclocking too high.
-##     May set warrany bit.
-##
-#current_limit_override=0x5A000020
-
-## over_voltage
-##     ARM/GPU core voltage adjust.
-##     May set warrany bit.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V (requires force_turbo=1 or current_limit_override)
-##     8        1.4   V (requires force_turbo=1 or current_limit_override)
-##
-#over_voltage=0
-
-## over_voltage_min
-##     Minimum ARM/GPU core voltage adjust (used for dynamic clocking).
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V (requires force_turbo=1)
-##     8        1.4   V (requires force_turbo=1)
-##
-#over_voltage_min=0
-
-## over_voltage_sdram
-##     Sets over_voltage_sdram_c, over_voltage_sdram_i, over_voltage_sdram_p
-##     together
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V
-##     8        1.4   V
-##
-#over_voltage_sdram=0
-
-## over_voltage_sdram_c
-##     SDRAM controller voltage adjust.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V
-##     8        1.4   V
-##
-#over_voltage_sdram_c=0
-
-## over_voltage_sdram_i
-##     SDRAM I/O voltage adjust.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V
-##     8        1.4   V
-##
-#over_voltage_sdram_i=0
-
-## over_voltage_sdram_p
-##     SDRAM phy voltage adjust.
-##
-##     Value    Description
-##     -------------------------------------------------------------------------
-##     -16      0.8   V
-##     -15      0.825 V
-##     -14      0.85  V
-##     -13      0.875 V
-##     -12      0.9   V
-##     -11      0.925 V
-##     -10      0.95  V
-##     -9       0.975 V
-##     -8       1.0   V
-##     -7       1.025 V
-##     -6       1.05  V
-##     -5       1.075 V
-##     -4       1.1   V
-##     -3       1.125 V
-##     -2       1.15  V
-##     -1       1.175 V
-##     0        1.2   V (Default)
-##     1        1.225 V
-##     2        1.25  V
-##     3        1.275 V
-##     4        1.3   V
-##     5        1.325 V
-##     6        1.35  V
-##     7        1.375 V
-##     8        1.4   V
-##
-#over_voltage_sdram_p=0
-
-################################################################################
-##  USB Power
-################################################################################
-
-## max_usb_current
-##     When set to 1, change the output current limit (for all 4 USB
-##     ports combined) from 600mA to double that, 1200mA.
-##
-##     This option is not available for Model A/B boards.
-##
-##     Default 0.
-##
-#max_usb_current=0
-
-################################################################################
-##  Base Device Tree Parameters
-################################################################################
-
-## audio
-##     Enable the onboard ALSA audio
-##
-##     Default off.
-##
-dtparam=audio=on
-
-## i2c_arm
-##     Enable the ARM's i2c interface
-##
-##     Default off.
-##
-#dtparam=i2c_arm=off
-
-## i2c_vc
-##     Enable the i2c interface
-##
-##     Usually reserved for the VideoCore processor
-##
-##     Default off.
-##
-#dtparam=i2c_vc=off
-
-## i2c_arm_baudrate
-##     Set the baudrate of the ARM's i2c interface
-##
-##     Default 100000.
-##
-#dtparam=i2c_arm_baudrate=100000
-
-## i2c_vc_baudrate
-##     Set the baudrate of the VideoCore i2c interface
-##
-##     Default 100000.
-##
-#dtparam=i2c_vc_baudrate=100000
-
-## i2s
-##     Set to "on" to enable the i2s interface
-##
-##     Default off.
-##
-#dtparam=i2s=off
-
-## spi
-##     Set to "on" to enable the spi interfaces
-##
-##     Default off.
-##
-#dtparam=spi=off
-
-## random
-##     Set to "on" to enable the hardware random
-##
-##     Default off.
-##
-#dtparam=random=off
-
-## uart0
-##     Set to "off" to disable uart0
-##
-##     Default on.
-##
-#dtparam=uart0=on
-
-## watchdog
-##     Set to "on" to enable the hardware watchdog
-##
-##     Default off.
-##
-#dtparam=watchdog=off
-
-## act_led_trigger
-##     Choose which activity the LED tracks.
-##
-##     Use "heartbeat" for a nice load indicator.
-##
-##     Default mmc.
-##
-#dtparam=act_led_trigger=mmc
-
-## act_led_activelow
-##     Set to "on" to invert the sense of the LED
-##
-##     Default off.
-##
-#dtparam=act_led_activelow=off
-
-## act_led_gpio
-##     Set which GPIO to use for the activity LED
-##
-##     In case you want to connect it to an external device
-##
-##     Default 16 on a non-Plus board, 47 on a Plus or Pi 2.
-##
-#dtparam=act_led_gpio=47
-
-## pwr_led_trigger
-##     Choose which activity the LED tracks.
-##
-##     Use "heartbeat" for a nice load indicator.
-##
-##     Not available on Model A/B boards.
-##
-##     Default mmc.
-##
-#dtparam=pwr_led_trigger=mmc
-
-## pwr_led_activelow
-##     Set to "on" to invert the sense of the LED
-##
-##     Not available on Model A/B boards.
-##
-##     Default off.
-##
-#dtparam=pwr_led_activelow=off
-
-## pwr_led_gpio
-##     Set which GPIO to use for the PWR LED
-##
-##     In case you want to connect it to an external device
-##
-##     Not available on Model A/B boards.
-##
-##     Default 35.
-##
-#dtparam=pwr_led_gpio=35
diff --git a/rpi3+/10-vchiq-permissions.rules b/rpi3+/10-vchiq-permissions.rules
new file mode 100644
index 0000000..bacea0e
--- /dev/null
+++ b/rpi3+/10-vchiq-permissions.rules
@@ -0,0 +1 @@
+SUBSYSTEM=="vchiq",GROUP="video",MODE="0660"
diff --git a/rpi3+/mageia4arm.cfg.original b/rpi3+/mageia4arm.cfg.original
new file mode 100644
index 0000000..e1b78d9
--- /dev/null
+++ b/rpi3+/mageia4arm.cfg.original
@@ -0,0 +1,56 @@
+
+# Copyright (C) 2017-2018 Daniel Tartavel-jeannot   <dtux@free.fr>
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+
+MAGEIA_VERSION="7"
+ARM_VERSION="armv7hl"
+
+#target plateform (xu3-4 or rpi)
+TARGET="rpi" 
+
+# URL of the Mageia mirror used to install ( see mirrors.mageia.org )
+MIRROR="http://ftp.free.fr/mirrors/mageia.org/distrib/$MAGEIA_VERSION/$ARM_VERSION"
+# image will be created here
+INSTALL_PATH="<change this>"
+
+# Build directory will be created here
+BUILD_PATH="$INSTALL_PATH/build"
+
+#name of the image
+IMAGE="Mageia-${MAGEIA_VERSION}-$TARGET.img"
+
+#Mount point of image's partitions
+#no need to be changed
+BOOT="/mnt/boot"
+ROOT="/mnt/root"
+
+#Default user
+ID_USER="pi"
+PASSWORD="raspberry"
+
+#root password
+ROOT_PWD="piroot"
+
+#Hostname 
+HOSTNAME="$TARGET.$ID_USER" 
+
+#Filesystem of boot partitions (default ext4 raspberry pi need vfat)
+#DO NOT CHANGE THIS
+BOOTFS="vfat"
+
+#Path where the raspberry pi firmware is/will be downloaded
+FIRMWARE_PATH="$INSTALL_PATH"
+FIRMWARE_DIR="firmware-stable"
diff --git a/rpi3+/modprobe.conf b/rpi3+/modprobe.conf
new file mode 100644
index 0000000..7725dae
--- /dev/null
+++ b/rpi3+/modprobe.conf
@@ -0,0 +1,3 @@
+alias wlan0 brcmfmac
+alias eth0 smsc95xx
+alias usb0 rndis_host
diff --git a/rpi3+/second_stage_install.sh b/rpi3+/second_stage_install.sh
new file mode 100644
index 0000000..1848789
--- /dev/null
+++ b/rpi3+/second_stage_install.sh
@@ -0,0 +1,41 @@
+#!/bin/bash
+
+# Copyright (C) 2017-2018 Daniel Tartavel-jeannot   <contact@librepc.com>
+#
+
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program. If not, see <http://www.gnu.org/licenses/>.
+
+/usr/bin/chown :shadow /etc/shadow /etc/gshadow /etc/login.defs /etc/pam.d/chage-chfn-chsh /etc/pam.d/chpasswd-newusers /etc/pam.d/system-auth /etc/pam.d/user-group-mod /bin/passwd /bin/chage
+
+/usr/bin/chown :systemd-journal -R /var/log/journal
+
+#Install all packages you need
+# No verifying rpm due to a bug in packages, some are not signed
+
+/usr/sbin/urpmi --auto --no-verify-rpm basesystem chrony rng-tools man openssh-server rfkill wireless-tools bluez wpa_supplicant make binutils dracut u-boot rsync kernel-desktop-latest mlocate drakx-kbd-mouse-x11
+
+
+/usr/bin/chown :chrony -R /etc/chrony.keys /var/log/chrony
+/usr/bin/chown :daemon /etc/wpa_supplicant.conf
+/usr/bin/chown :tty /bin/write /bin/wall
+/usr/bin/chown :lock /sbin/lockdev
+/usr/bin/chown :bin /sbin/traceroute
+/usr/bin/chown polkitd /etc/polkit-1/rules.d
+
+KV=`basename /boot/vmlinuz-*`
+KV=${KV#vmlinuz-}
+dracut --kver $KV
+rm -f $0
+cp /boot/vmlinuz-* /boot/vmlinuz
+cp /boot/initrd-* /boot/initrd
diff --git a/tools/install_graphical.sh~ b/tools/install_graphical.sh~
deleted file mode 100755
index adba427..0000000
--- a/tools/install_graphical.sh~
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/bash
-
-# Copyright (C) 2017-2018 Daniel Tartavel-jeannot   <contact@librepc.com>
-#
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-if [ "$1" = "" ];then
-	echo "syntax install_graphical.sh [xfce | lxde | lxqt | plasma | gnome] ( see task-* for all )"
-else
-	PATH="$(/bin/dirname  "$(readlink -f "$0")")"
-	echo "Path="$PATH
-	. $PATH/install_video_driver.sh
-	. $PATH/install_gstreamer.sh
-	/usr/sbin/urpmi --auto --no-verify-rpm task-$1
-fi
diff --git a/tools/install_video_driver.sh~ b/tools/install_video_driver.sh~
deleted file mode 100755
index a0ba320..0000000
--- a/tools/install_video_driver.sh~
+++ /dev/null
@@ -1,26 +0,0 @@
-#!/bin/bash
-
-# Copyright (C) 2017-2018 Daniel Tartavel-jeannot   <contact@librepc.com>
-#
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-
-/usr/sbin/urpmi --auto --no-verify-rpm x11-driver-video-fbdev xinit xclock
-
-echo "#!/bin/sh
-
-# patch for display manager service which do not start automatically
-systemctl start display-manager.service &" >/etc/rc.d/rc.local
-/usr/bin/chmod a+x /etc/rc.d/rc.local
diff --git a/tools/install_xfce.sh~ b/tools/install_xfce.sh~
deleted file mode 100755
index 24118d0..0000000
--- a/tools/install_xfce.sh~
+++ /dev/null
@@ -1,23 +0,0 @@
-#!/bin/bash
-
-# Copyright (C) 2017-2018 Daniel Tartavel-jeannot   <contact@librepc.com>
-#
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
-
-PATH="$(/bin/dirname  "$(readlink -f "$0")")"
-echo "Path="$PATH
-. $PATH/install_video_driver.sh
-. $PATH/install_gstreamer.sh
-/usr/sbin/urpmi --auto --no-verify-rpm task-xfce