# Jan Matis <damned@hq.alert.sk>, 2000.
# Pavol Cvengros <orpheus@hq.alert.sk>, 2000.
# Michal Holes <Michal@Holes.sk>, 2004,2005.
# Tibor Pittich <Tibor.Pittich@phuture.sk>, 2002,2003,2004,2005.
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-09-16 17:08+0200\n"
"PO-Revision-Date: 2005-09-12 17:59+0100\n"
"Last-Translator: Tibor Pittich <Tibor.Pittich@mandriva.org>\n"
"Language-Team: <i18n@mandrake.sk>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "Ktorý USB kľúč si želáte naformátovať?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"Chystáte sa formátovať USB zariadenie \"%s\", čo vymaže všetky dáta\n"
"Uistite sa, že zvolené zariadenie je skutočne to, ktoré chcete formátovať.\n"
"Pri tejto operátcii doporučujeme odpojiť všetky ostatné USB zariadenia."
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "Na kľúč nie je možné zapisovať"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
"USB kľúč je asi zamknutý proti prepísaniu. Prosím\n"
"odpojte ho, odstráňte ochranu proti zápisu a pripojte ho znova."
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Znova"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "Pokračovať bez USB kľúča"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"Zdá sa, že USB kľúč je chránený proti zápisu, takže nie je možné ho\n"
"bezpečne odpojiť.\n"
"\n"
"\n"
"Kliknite na tlačidlo reštart, odpojte ho, zrušte ochranu proti zápisu,\n"
"pripojte opäť kľúč a spustite Mandriva Move znova."
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1326
#, c-format
msgid "Reboot"
msgstr "Reštart"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"Váš USB disk neobsahuje platný oddiel s FAT.\n"
"Jeden takýto oddiel je treba, aby bolo možné pokračovať (naviac je to "
"štandardný\n"
"postupu, aby bolo možné presúvať a prisupovať k súborom z počítačov,\n"
"na ktorých sú Windows). Zasuňte prosím USB disk, ktorý obsahuje oddiel vo "
"formáte FAT.\n"
"\n"
"\n"
"Môžete tiež pokračovať bez USB disku - stále potom môžete používať\n"
"vašu distribúciu Mandriva Move ako bežný produkčný operačný\n"
"systém."
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"Na vašom systéme nebol nájdený žiadny USB disk. Ak ho teraz\n"
"zasuniete, Mandriva Move bude mať možnosť transparentne\n"
"ukadať údaje vo vašom domovskom priečinku a systémové nastavenia,\n"
"ktoré budú dostupné pri ďalšom štarte tohoto alebo iného\n"
"počítača. Poznámka: ak disk zasuniete teraz, počkajte pred ďalším hľadaním "
"niekoľko sekúnd.\n"
"\n"
"\n"
"Tiež môžete pokračovať bez USB disku - stále budete môcť používať vašu "
"distribúciu Mandriva Move ako bežný produkčný operačný\n"
"systém."
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "Je potrebný kľúč pre uloženie vašich údajov"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "Opäť detekovať USB kľúč"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "Nastavovanie USB kľúča"
#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Prosím čakajte, nastavujú sa konfiguračné súbory na USB kľúči..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
"Zadajte informácie o používateľovi, heslo bude použité pre šetrič obrazovky"
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "Automatická konfigurácia"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Prosím čakajte, hľadajú sa a konfigurujú zariadenia..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:209 install_any.pm:1770
#: install_any.pm:1822 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27
#: network/ndiswrapper.pm:42 network/ndiswrapper.pm:89
#: network/ndiswrapper.pm:101 network/netconnect.pm:835
#: network/netconnect.pm:934 network/netconnect.pm:938
#: network/netconnect.pm:942 network/netconnect.pm:947
#: network/netconnect.pm:1092 network/netconnect.pm:1096
#: network/netconnect.pm:1215 network/netconnect.pm:1220
#: network/netconnect.pm:1240 network/netconnect.pm:1394
#: network/thirdparty.pm:319 network/thirdparty.pm:326
#: network/thirdparty.pm:370 network/thirdparty.pm:372
#: network/thirdparty.pm:393 network/thirdparty.pm:417
#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
#: printer/printerdrake.pm:772 printer/printerdrake.pm:1576
#: printer/printerdrake.pm:1624 printer/printerdrake.pm:1661
#: printer/printerdrake.pm:1706 printer/printerdrake.pm:1710
#: printer/printerdrake.pm:1724 printer/printerdrake.pm:1816
#: printer/printerdrake.pm:1897 printer/printerdrake.pm:1901
#: printer/printerdrake.pm:1905 printer/printerdrake.pm:1954
#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2016
#: printer/printerdrake.pm:2030 printer/printerdrake.pm:2150
#: printer/printerdrake.pm:2154 printer/printerdrake.pm:2197
#: printer/printerdrake.pm:2272 printer/printerdrake.pm:2290
#: printer/printerdrake.pm:2299 printer/printerdrake.pm:2308
#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2383
#: printer/printerdrake.pm:2478 printer/printerdrake.pm:3037
#: printer/printerdrake.pm:3321 printer/printerdrake.pm:3327
#: printer/printerdrake.pm:3891 printer/printerdrake.pm:3895
#: printer/printerdrake.pm:3899 printer/printerdrake.pm:4360
#: printer/printerdrake.pm:4601 printer/printerdrake.pm:4629
#: printer/printerdrake.pm:4706 printer/printerdrake.pm:4772
#: printer/printerdrake.pm:4892 standalone/drakTermServ:394
#: standalone/drakTermServ:464 standalone/drakTermServ:473
#: standalone/drakTermServ:774 standalone/drakTermServ:781
#: standalone/drakTermServ:802 standalone/drakTermServ:849
#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
#: standalone/drakTermServ:1588 standalone/drakTermServ:1593
#: standalone/drakTermServ:1601 standalone/drakTermServ:1613
#: standalone/drakTermServ:1634 standalone/drakauth:36
#: standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1093 standalone/drakbackup:1125
#: standalone/drakbackup:1648 standalone/drakbackup:1804
#: standalone/drakbackup:2429 standalone/drakbackup:4118
#: standalone/drakbackup:4338 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:379
#: standalone/draksambashare:383 standalone/draksambashare:386
#: standalone/draksambashare:389 standalone/draksambashare:449
#: standalone/draksambashare:473 standalone/draksambashare:547
#: standalone/draksambashare:629 standalone/draksambashare:696
#: standalone/draksambashare:796 standalone/draksambashare:803
#: standalone/draksambashare:938 standalone/draksambashare:1129
#: standalone/draksambashare:1138 standalone/draksambashare:1147
#: standalone/draksambashare:1168 standalone/draksambashare:1177
#: standalone/draksambashare:1186 standalone/draksambashare:1206
#: standalone/draksambashare:1214 standalone/draksambashare:1226
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:49 standalone/logdrake:171
#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Chyba"
#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Vyskytla sa chyba a neviem ju úplne vyriešiť.\n"
"Pokračujte na vlastnú zodpovednosť."
#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Vyskytla sa chyba"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"Vyskytla sa chyba:\n"
"\n"
"\n"
"%s\n"
"\n"
"Táto chyba môže pochádzať z narušených systémových\n"
"súborov s nastavením na USB disku; v tomto prípade by problém\n"
"vyriešilo odstránenie týchto súborov a opätovné naštartovanie systému\n"
"Mandriva Move. Ak to chcete urobiť, stlačte zodpovedajúce tlačidlo.\n"
"\n"
"\n"
"Tiež môžete systém reštartovať a vybrať USB disk, alebo si\n"
"prehliadnuť jeho obsah pod iným operačným systémom alebo\n"
"sa pozrieť na súbory so záznamami v textovej konzole #3 a #4 a skúsiť\n"
"zistiť, čo sa deje."
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "Odstránenie systémových konfiguračných súborov"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "Jednoduchý reštart"
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "Je možné spustiť iba bez podrpory CDROM."
#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "Ukončiť tieto programy"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "Bez podpory CDROM"
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
#: diskdrake/interactive.pm:1115
#, c-format
msgid "Read carefully!"
msgstr "Čítajte pozorne!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"Nemôžete použiť iný disk CDROM kým budú bežať nasledujúce programy: \n"
"%s"
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "Kopírovanie do pamäte pre umožnenie odpojenia CDROM"
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB a viac"
#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "X server"
#: Xconfig/card.pm:156
#, c-format
msgid "Choose an X server"
msgstr "Zvoľte si X server"
#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr "Nastavenie viac-monitorov"
#: Xconfig/card.pm:189
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Váš systém podporuje nastavenie pre viac-monitorov.\n"
"Čo chcete spraviť?"
#: Xconfig/card.pm:258
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "Nie je možné nainštalovať Xorg balík: %s"
#: Xconfig/card.pm:268
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Zvoľte veľkosť pamäti na grafickej karte"
#: Xconfig/card.pm:357
#, c-format
msgid "Xorg configuration"
msgstr "Konfigurácia Xorg"
#: Xconfig/card.pm:359
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Akú konfiguráciu Xorg si želáte?"
#: Xconfig/card.pm:392
#, c-format
msgid "Configure all heads independently"
msgstr "Nastaviť všetky zobrazovače osobitne"
#: Xconfig/card.pm:393
#, c-format
msgid "Use Xinerama extension"
msgstr "Použiť Xinerama rozšírenie"
#: Xconfig/card.pm:398
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Nastaviť iba kartu \"%s\"%s"
#: Xconfig/card.pm:410 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "XFree86 %s"
#: Xconfig/card.pm:417 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s s 3D hardvérovou akceleráciou"
#: Xconfig/card.pm:419
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Vaša karta má podporu hardvérovej 3D akcelerácie v Xorg %s."
#: Xconfig/card.pm:425
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s s EXPERIMENTÁLNOU 3D akceleráciou"
#: Xconfig/card.pm:427
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Vaša karta má podporu hardvérovej 3D akcelerácie ale iba v Xorg %s.\n"
"POZOR, TÁTO PODPORA JE IBA EXPERIMENTÁLNA A MÔŽE SPÔSOBIŤ ZAMRZNUTIE "
"POČÍTAČA."
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
#, c-format
msgid "Custom"
msgstr "Vlastný výber"
#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1326
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4701 printer/printerdrake.pm:5165
#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
#: standalone/logdrake:176 standalone/net_applet:102
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Koniec"
#: Xconfig/main.pm:129
#, c-format
msgid "Graphic Card"
msgstr "Grafická karta"
#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Monitor"
#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "Rozlíšenie"
#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "Test"
#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1125 standalone/drakfont:491
#: standalone/drakfont:554
#, c-format
msgid "Options"
msgstr "Parametre"
#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "Váš konfiguračný súbor pre X.org je nekorektný, bude ignorovaný."
#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Zachovať zmeny?\n"
"Aktuálna konfigurácia je:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "Zvoľte si monitor pre výstup č. %d"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Zvoľte si monitor"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Všeobecné"
#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "Výrobca"
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Plug'n Play zrejme zlyhalo. Vyberte si prosím ručne monitor"
#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Dva kritické parametre sú vertikálna frekvencia (frekvencia, ktorou je "
"obnovovaná celá obrazovka) a horizontálna frekvencia (frekvencia, ktorou sú "
"zobrazované jednotlivé riadky).\n"
"Je veľmi dôležité, aby ste nenastavili frekvencie, ktoré prevyšujú "
"schopnosti vášho monitora. Mohol by sa poškodiť.\n"
"Ak sa neviete uistiť, zvoľte radšej najprv konzervatívnejšie nastavenie."
#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Horizontálna frekvencia"
#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Vertikálna frekvencia"
#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 farieb (8 bit)"
#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 tisíc farieb (15 bit)"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 tisíc farieb (16 bit)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 miliónov farieb (24 bit)"
#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Rozlíšenia"
#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1586 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Iné/á"
#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Zvoľte si rozlíšenie a farebnú hĺbku"
#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "Grafická karta: %s"
#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1350 standalone/drakbackup:3975
#: standalone/drakbackup:4035 standalone/drakbackup:4079
#: standalone/drakconnect:158 standalone/drakconnect:852
#: standalone/drakconnect:939 standalone/drakconnect:1030
#: standalone/drakfont:575 standalone/drakfont:585 standalone/draksplash:173
#: standalone/drakups:212 standalone/net_monitor:339 ugtk2.pm:392 ugtk2.pm:490
#: ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "OK"
#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
#: install_steps_interactive.pm:834 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3971 standalone/drakautoinst:215
#: standalone/drakbackup:1350 standalone/drakbackup:3901
#: standalone/drakbackup:3905 standalone/drakbackup:3963
#: standalone/drakconnect:157 standalone/drakconnect:937
#: standalone/drakconnect:1029 standalone/drakfont:585 standalone/drakfont:663
#: standalone/drakfont:740 standalone/draksplash:173 standalone/drakups:219
#: standalone/logdrake:176 standalone/net_monitor:338 ugtk2.pm:386
#: ugtk2.pm:488 ugtk2.pm:497 ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "Zrušiť"
#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:681 interactive/gtk.pm:683 standalone/drakTermServ:284
#: standalone/drakbackup:3897 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:314 standalone/draksec:342 standalone/draksec:344
#: standalone/draksec:362 standalone/draksec:364 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "Pomoc"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Test konfigurácie"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Chcete otestovať konfiguráciu?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Varovanie: testovanie tejto karty môže zastaviť váš systém"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"Vyskytla sa chyba:\n"
"%s\n"
"Skúste zmeniť niektoré parametre"
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "Opustiť do %d sekúnd"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Je toto správne nastavenie?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Nastavenie klávesnice: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Typ myši: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Port myši: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Monitor: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Horizontálna frekvencia monitoru: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Vertikálna frekvencia monitoru: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Grafická karta: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Grafická pamäť: %s kB\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Farebná hĺbka: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Rozlíšenie: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg ovládač: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "X pri štarte"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Môžem nastaviť váš systém tak, aby automaticky spúšťal grafické rozhranie "
"(Xorg) po reštarte.\n"
"Chcete mať spustené Xorg po štarte počítača?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Vaša grafická karta má zrejme konektor pre TV výstup.\n"
"Môže byť nakonfigurovaná pre používanie frame buffera.\n"
"\n"
"Ak si to želáte, pripojte vašu grafickú kartu do TV prijímača pred spustením "
"počítača.\n"
"Potom zvoľte \"TV výstup\" položku v zavádzači.\n"
"\n"
"Máte túto funkciu?"
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "Akú normu používa vaša TV?"
#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""
"_:zachovať pôvodný vzhľad\n"
"iný"
#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:356
#: standalone/service_harddrake:206
#, c-format
msgid "Please wait"
msgstr "Prosím čakajte"
#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr "Prebieha inštalácia zavádzača"
#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO sa chystá priradiť zariadeniu %s nové ID partície (Volume ID). Zmena\n"
"ID partície je pokladaná operačnými systémami Windows NT,\n"
"2000, alebo XP za fatálnu chybu.\n"
"Toto varovanie sa nevzťahuje na operačné systémy Windows 95 a 98 alebo\n"
"na dátové disky Windows NT.\n"
"\n"
"Přiradiť nové ID partície?"
#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "Inštalácia zavádzača zlyhala. Vyskytla sa nasledujúca chyba:"
#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Bude potrebné aby ste zmenili root zariadenie pre váš Open Firmware\n"
" kvôli zavádzaču. Ak nevidíte výzvu zavádzača po reštarte,\n"
" stlačte kombináciu 'Command-Option-O-F' počas reštartu a napíšte:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Potom napíšte: shut-down\n"
"Pri ďalšom štarte by ste mali vidieť výzvu zavádzača."
#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Rozhodli ste sa inštalovať zavádzač na diskový oddiel.\n"
"Toto umožňuje mať už zavádzač na vašom disku (napr. System Commander).\n"
"\n"
"Z akého disku chcete štartovať?"
#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Prvý sektor disku (MBR)"
#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "Prvý sektor hlavného oddielu"
#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "Na diskete"
#: any.pm:236 help.pm:739 printer/printerdrake.pm:4357
#, c-format
msgid "Skip"
msgstr "Vynechať"
#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "Inštalácia lilo/grub"
#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Kam si želáte nainštalovať zavádzač?"
#: any.pm:267 standalone/drakboot:269
#, c-format
msgid "Boot Style Configuration"
msgstr "Konfigurácia štýlu štartovania"
#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "Hlavné parametre zavádzača"
#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "Zadajte veľkosť pamäti v Mb"
#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Parameter ``Obmedz voľby príkazového riadku'' je bez použitia hesla vypnutý"
#: any.pm:278 any.pm:615 authentication.pm:181
#, c-format
msgid "The passwords do not match"
msgstr "Zadané heslá nie sú rovnaké"
#: any.pm:278 any.pm:615 authentication.pm:181 diskdrake/interactive.pm:1326
#, c-format
msgid "Please try again"
msgstr "Prosím skúste znovu"
#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr "Použiť zavádzač"
#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "Boot zariadenie"
#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "Pauza pred štartom predvoleného jadra"
#: any.pm:288
#, c-format
msgid "Enable ACPI"
msgstr "Povoliť ACPI"
#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr "Vnútiť nepoužívanie APIC"
#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr "Vnútiť voľbu No Local APIC"
#: any.pm:294 any.pm:650 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:568 printer/printerdrake.pm:1888
#: printer/printerdrake.pm:2009 standalone/drakbackup:1630
#: standalone/drakbackup:3504 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "Heslo"
#: any.pm:295 any.pm:651 authentication.pm:187
#, c-format
msgid "Password (again)"
msgstr "Heslo (znova)"
#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr "Obmedz voľby príkazového riadku"
#: any.pm:296
#, c-format
msgid "restrict"
msgstr "obmedz"
#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Vyčistiť /tmp pri každom štarte"
#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Presná veľkosť pamäte (našiel som %d MB)"
#: any.pm:309
#, c-format
msgid "Init Message"
msgstr "Inicializačná správa"
#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr "Pauza pre Open Firmware"
#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Oneskorenie pre štart kernelu"
#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "Povoliť štart z CD?"
#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr "Povoliť štart z Open Firmware?"
#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "Predvolený OS?"
#: any.pm:369
#, c-format
msgid "Image"
msgstr "Obraz"
#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "Root"
#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr "Pridať"
#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "Video mód"
#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:376
#, c-format
msgid "Network profile"
msgstr "Sieťový profil"
#: any.pm:385 any.pm:390 any.pm:392
#, c-format
msgid "Label"
msgstr "Záznam"
#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Predvoľba"
#: any.pm:394
#, c-format
msgid "Initrd-size"
msgstr "Initrd-veľkosť"
#: any.pm:396
#, c-format
msgid "NoVideo"
msgstr "Bez videa"
#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "Prázdny záznam nie je dovolený"
#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr "Musíte zadať súbor s jadrom"
#: any.pm:408
#, c-format
msgid "You must specify a root partition"
msgstr "Musíte nastaviť koreňový oddiel"
#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "Tento záznam je už použitý"
#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Aký typ záznamu chcete pridať"
#: any.pm:424
#, c-format
msgid "Linux"
msgstr "Linux"
#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Iný OS (SunOS...)"
#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Iný OS (MacOS...)"
#: any.pm:425
#, c-format
msgid "Other OS (Windows...)"
msgstr "Iný OS (Windows...)"
#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Momentálne sa tu nachádzajú tieto záznamy.\n"
"Môžete pridávať ďalšie alebo meniť existujúce."
#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr "prístup ku X programom"
#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr "prístup k rpm nástrojom"
#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr "dovoliť \"su\""
#: any.pm:604
#, c-format
msgid "access to administrative files"
msgstr "prístup ku konfiguračným súborom"
#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr "prístup k sieťovým nástrojom"
#: any.pm:606
#, c-format
msgid "access to compilation tools"
msgstr "prístup ku kompilačným nástrojom"
#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(už pridaný %s)"
#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "Toto heslo je príliš jednoduché"
#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "Prosím zadajte používateľské meno"
#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Používateľské meno môže obsahovať len malé písmená, číslice, `-' a `_'"
#: any.pm:619
#, c-format
msgid "The user name is too long"
msgstr "Používateľské meno je príliš dlhé"
#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "Takýto používateľ je už pridaný"
#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "ID používateľa"
#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "ID skupiny"
#: any.pm:625
#, c-format
msgid "%s must be a number"
msgstr "%s musí byť číslo"
#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr "%s by malo byť viac ako 500. Akceptovať aj tak?"
#: any.pm:631 standalone/draksambashare:1210
#, c-format
msgid "Add user"
msgstr "Pridať používateľa"
#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Pridať používateľa\n"
"%s"
#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:5165
#: standalone/drakbackup:2717 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Hotovo"
#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Akceptuj používateľa"
#: any.pm:648
#, c-format
msgid "Real name"
msgstr "Reálne meno"
#: any.pm:649 standalone/drakbackup:1625
#, c-format
msgid "Login name"
msgstr "Prihlasovacie meno"
#: any.pm:652
#, c-format
msgid "Shell"
msgstr "Interpreter"
#: any.pm:656
#, c-format
msgid "Icon"
msgstr "Ikona"
#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Autologin"
#: any.pm:704
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr ""
"Môžem nastaviť váš počítač tak, aby sa po reštarte prebehlo automatické "
"prihlásenie niektorého používateľa."
#: any.pm:705
#, c-format
msgid "Use this feature"
msgstr "Použiť túto vlastnosť"
#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "Zvoľte predvoleného používateľa:"
#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "Vyberte si window manažéra:"
#: any.pm:719 any.pm:787
#, c-format
msgid "Please choose a language to use."
msgstr "Prosím, zvoľte jazyk, ktorý chcete používať."
#: any.pm:720 any.pm:788
#, c-format
msgid "Language choice"
msgstr "Výber jazyka"
#: any.pm:748
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "Môžete zvoliť ďalšie jazyky použiteľné po inštalácii"
#: any.pm:751
#, c-format
msgid "Multi languages"
msgstr "Viac jazykov"
#: any.pm:767 any.pm:796 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Použiť štandardne Unicode"
#: any.pm:768 help.pm:647
#, c-format
msgid "All languages"
msgstr "Všetky jazyky"
#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:955
#, c-format
msgid "Country / Region"
msgstr "Krajina"
#: any.pm:842
#, c-format
msgid "Please choose your country."
msgstr "Prosím, zvoľte si vašu krajinu."
#: any.pm:844
#, c-format
msgid "Here is the full list of available countries"
msgstr "Tu je celý zoznam dostupných krajín"
#: any.pm:845
#, c-format
msgid "Other Countries"
msgstr "Iné krajiny"
#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr "Rozšírené"
#: any.pm:853
#, c-format
msgid "Input method:"
msgstr "Vstupná metóda:"
#: any.pm:856 install_any.pm:417 network/netconnect.pm:306
#: network/netconnect.pm:311 network/netconnect.pm:1206 network/wireless.pm:7
#: printer/printerdrake.pm:105 printer/printerdrake.pm:2430
#, c-format
msgid "None"
msgstr "Nič"
#: any.pm:973
#, c-format
msgid "No sharing"
msgstr "Bez zdieľania"
#: any.pm:973
#, c-format
msgid "Allow all users"
msgstr "Povoliť všetkým používateľom"
#: any.pm:977
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Želáte si povoliť používateľom zdielať niektorý z priečinkov?\n"
"Týmto povolíte používateľom zdieľanie jednoduchým kliknutím na \"Zdieľať\" v "
"Konquerore a Nautiluse.\n"
"\n"
"\"Vlastný výber\" povolí granularitu podľa používateľa.\n"
#: any.pm:989
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
"NFS: je tradičný systém pre zdieľanie súborov v systémoch Unix s malou "
"podporou systémov Mac a Windows"
#: any.pm:992
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
"SMB: systém zdieľania súborov používaný vo Windows, Mac OS X a mnohými "
"modernými Linux systémami."
#: any.pm:1000
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr ""
"Môžete spraviť export pomocou NFS alebo Samba. Vyberte si čo chcete použiť."
#: any.pm:1025
#, c-format
msgid "Launch userdrake"
msgstr "Spusť userdrake"
#: any.pm:1025 printer/printerdrake.pm:4196 printer/printerdrake.pm:4199
#: printer/printerdrake.pm:4200 printer/printerdrake.pm:4201
#: printer/printerdrake.pm:5483 standalone/drakTermServ:294
#: standalone/drakbackup:4097 standalone/drakbug:126 standalone/drakfont:498
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "Zatvoriť"
#: any.pm:1027
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"Zdieľanie podľa používateľov používa skupinu \"fileshare\".\n"
"Môžete použiť userdrake na pridanie používateľa do tejto skupiny."
#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "Lokálny súbor"
#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"
#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr "Smart Card"
#: authentication.pm:27 authentication.pm:152
#, c-format
msgid "Windows Domain"
msgstr "Windows doména"
#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr "Active Directory s SFU"
#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr "Active Directory s Winbind"
#: authentication.pm:55
#, c-format
msgid "Local file:"
msgstr "Lokálny súbor:"
#: authentication.pm:55
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
"Overovanie a ukladanie informácií o používateľovi bude prebiehať v lokálnom "
"súbore"
#: authentication.pm:56
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:56
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"Niektoré alebo všetky overovania bude používať LDAP. LDAP združuje niektoré "
"informácie vo vnútri vašej organizácie."
#: authentication.pm:57
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:57
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"Umožňuje spustenie skupiny počítačov v rovnakej doméne NIS (Network "
"Information Service) so spoločným heslom a skupinami"
#: authentication.pm:58
#, c-format
msgid "Windows Domain:"
msgstr "Windows doména:"
#: authentication.pm:58
#, c-format
msgid ""
"iWinbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
"iWinbind umožňuje systému získať informácie a authentikačné informácie "
"používateľov v doméne Windows."
#: authentication.pm:59
#, c-format
msgid "Active Directory with SFU:"
msgstr "Active Directory s SFU:"
#: authentication.pm:59
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr "Pomocou Kerberos a Ldap pre authentikáciu zo servera Active Directory"
#: authentication.pm:60
#, c-format
msgid "Active Directory with Winbind:"
msgstr "Active Directory s Winbind:"
#: authentication.pm:60
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr ""
"Winbind umožňuje systému authentikovať používateľov z Windows Active "
"Directory servera."
#: authentication.pm:85
#, c-format
msgid "Authentication LDAP"
msgstr "Autentifikácia LDAP"
#: authentication.pm:86
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"
#: authentication.pm:87 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "LDAP server"
#: authentication.pm:100 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "jednoduché"
#: authentication.pm:101
#, c-format
msgid "TLS"
msgstr "TLS"
#: authentication.pm:102
#, c-format
msgid "SSL"
msgstr "SSL"
#: authentication.pm:103
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "bezpečnostná schéma (SASL/Kerberos)"
#: authentication.pm:110 authentication.pm:148
#, c-format
msgid "Authentication Active Directory"
msgstr "Autentifikácia Active Directory"
#: authentication.pm:111 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "Doména"
#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Server"
#: authentication.pm:114
#, c-format
msgid "LDAP users database"
msgstr "Databáza používateľov LDAP"
#: authentication.pm:115
#, c-format
msgid "Use Anonymous BIND "
msgstr "Použiť anonymný BIND"
#: authentication.pm:116
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "Používatelia z databázy LDAP, ktorí môžu prehliadať Active Directory"
#: authentication.pm:117
#, c-format
msgid "Password for user"
msgstr "Heslo používateľa"
#: authentication.pm:129
#, c-format
msgid "Authentication NIS"
msgstr "NIS autentifikácia"
#: authentication.pm:130
#, c-format
msgid "NIS Domain"
msgstr "NIS doména"
#: authentication.pm:131
#, c-format
msgid "NIS Server"
msgstr "NIS server"
#: authentication.pm:136
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Aby bolo možné pracovať ako W2K PDC, budete zrejme potrebovať ako admin "
"spustiť: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" "
"everyone /add a reštartovať server.\n"
"Budete tiež potrebovať meno/heslo doménového administrátora pre prístup k "
"počítaču s Windows(tm) doménou.\n"
"Ak nie je povolené používanie siete, DrakX sa pokúsi vstúpiť do domény až po "
"nastavení siete.\n"
"Z viacerých dôvodov je možné, že toto nastavenie nebude úspešné a doménová "
"autentikácia nebude fungovať, spustite 'smbpasswd -j DOMAIN -U USER%%"
"PASSWORD' za použitia vašej Windows(tm) domény a mena/hesla\n"
"administrátora po reštarte systému.\n"
"Príkaz 'wbinfo -t' potom otestuje či sú vaše nastavenia ohľadom "
"authentikácie správne."
#: authentication.pm:148
#, c-format
msgid "Authentication Windows Domain"
msgstr "Autentifikácia do Windows domény"
#: authentication.pm:150
#, c-format
msgid "Active Directory Realm "
msgstr "Realm pre Active Directory"
#: authentication.pm:153
#, c-format
msgid "Domain Admin User Name"
msgstr "Používateľské meno administrátora domény"
#: authentication.pm:154
#, c-format
msgid "Domain Admin Password"
msgstr "Heslo správcu domény"
#: authentication.pm:170
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
"Nastaviť heslo pre administrátora (root) a sieťové authentikačné metódy"
#: authentication.pm:171
#, c-format
msgid "Set administrator (root) password"
msgstr "Nastavenie administrátorského (root) hesla"
#: authentication.pm:172 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr "Authentikačná metóda"
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:177 help.pm:722
#, c-format
msgid "No password"
msgstr "Bez hesla"
#: authentication.pm:183
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Toto heslo je príliš jednoduché(musí byť minimálne %d znakov dlhé)"
#: authentication.pm:188 network/netconnect.pm:311 network/netconnect.pm:569
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "Autentifikácia"
#: authentication.pm:307
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "Nemôžem použiť broadcast bez NIS domény"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:764
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Vita vas zavadzac operacneho systemu\n"
"\n"
"Vyberte si operacny system, ktory si zelate spustit alebo\n"
"cakajte na spustenie predvoleneho.\n"
"\n"
#: bootloader.pm:904
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO s grafickým menu"
#: bootloader.pm:905
#, c-format
msgid "LILO with text menu"
msgstr "LILO s textovým menu"
#: bootloader.pm:906
#, c-format
msgid "GRUB with graphical menu"
msgstr "GRUB s grafickým menu"
#: bootloader.pm:907
#, c-format
msgid "GRUB with text menu"
msgstr "GRUB s textovým menu"
#: bootloader.pm:908
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:985
#, c-format
msgid "not enough room in /boot"
msgstr "nie je dostatok miesta na /boot"
#: bootloader.pm:1475
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Na oddiel %s nemôžete nainštalovať zavádzač\n"
#: bootloader.pm:1515
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
"Nastavenie vášho zavádzača musí byť aktualizované pretože partícia bola "
"prečíslovaná"
#: bootloader.pm:1528
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
"Zavádzať nemôže byť nainštalovaný korektne. Použite štart zo záchranného "
"alebo inštalačného CD a zadajte\"%s\""
#: bootloader.pm:1529
#, c-format
msgid "Re-install Boot Loader"
msgstr "Re-inštalácia zavádzača"
#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"
#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"
#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"
#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"
#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d minút"
#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 minúta"
#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d sekúnd"
#: common.pm:257
#, c-format
msgid "kdesu missing"
msgstr "chýba kdesu"
#: common.pm:260
#, c-format
msgid "consolehelper missing"
msgstr "chýba consolehelper"
#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Rakúsko"
#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Austrália"
#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Belgicko"
#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Brazília"
#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "Kanada"
#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Švajčiarsko"
#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Kostarika"
#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "Česká republika"
#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Nemecko"
#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Dánsko"
#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Estónsko"
#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "Španielsko"
#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Fínsko"
#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "Francúzsko"
#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Grécko"
#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Maďarsko"
#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Írsko"
#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "Izrael"
#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Taliansko"
#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Japonsko"
#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Holandsko"
#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Nórsko"
#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "Nový Zéland"
#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Poľsko"
#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Portugalsko"
#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Rusko"
#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Švédsko"
#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "Slovenská Republika"
#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Thajsko"
#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Taiwan"
#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Južná Afrika"
#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "Spojené štáty"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV je protokol, ktorý umožňuje pripojiť lokálne priečinky web servera\n"
"a používať ho ako lokálny súborový systém (iba za podmienky, že web server\n"
"je nakonfigurovaný ako WebDAV server). Ak chcete pridať WebDAV prípojný\n"
"bod, vyberte si \"Nový\"."
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Nový"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Odpoj"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Pripoj"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Bod pripojenia"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Prosím, zadajte adresu WebDAV servera"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL musí začínať http:// alebo https://"
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Server:"
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
#, c-format
msgid "Mount point: "
msgstr "Bod pripojenia: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
#, c-format
msgid "Options: %s"
msgstr "Možnosti: %s"
#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "Prosím, najprv si za zazálohujte vaše údaje"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Ak plánujete použiť aboot, nechajte prosím na začiatku disku dosť voľného "
"miesta.\n"
"(2048 sektorov bude stačiť)"
#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "Sprievodca"
#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Zvoľte si akciu"
#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Máte jednu veľkú oblasť Microsoft Windows.\n"
"Skúste zmeniť jej veľkosť\n"
"(kliknite danú oblasť, potom kliknite na \"Zmeniť veľkosť\")"
#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Prosím kliknite na oddiel"
#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:2952 standalone/drakbackup:3012
#, c-format
msgid "Details"
msgstr "Detaily"
#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "Neboli nájdené žiadne pevné disky"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "Žurnálovací súborový systém"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Swap"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Windows"
#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
#, c-format
msgid "Empty"
msgstr "Prázdny"
#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Typ súborového systému:"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Použite radšej ``%s''"
#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "Vytvor"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Typ"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "Zrušiť"
#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Najprv spravte `Unmount''"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "Zvoľte iný oddiel"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "Zvoľte oddiel"
#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "Koniec"
#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "Späť"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "Prepni do normálneho režimu"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "Prepni do expert režimu"
#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "Pokračovať?"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "Koniec bez uloženia"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Ukončiť bez zápisu tabuľky rozdelenia disku?"
#: diskdrake/interactive.pm:285
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Želáte si uložiť zmeny do /etc/fstab"
#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Aby sa prejavili úpravy tabuľky rozdelenia disku, musíte reštartovať"
#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"Mali by ste naformátovať oblasť %s.\n"
"Inak nebude zapísaný žiaden bod pripojenia %s do fstab.\n"
"Ukončiť?"
#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Zmazať všetko"
#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Automaticky prerozdeliť"
#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, c-format
msgid "More"
msgstr "Viac"
#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "Informácie o pevnom disku"
#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "Všetky primárne oddiely sú už použité"
#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "Nemôžem pridať ďalšie oddiely"
#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Ak chcete mať viac diskových oddielov, tak zmažte jeden z nich, aby sa dal "
"vytvoriť rozšírený oddiel disku"
#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr "Vypnutý supermount"
#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr "Supermount"
#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr "Supermount s výnimkou CDROM mechaník"
#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Ulož tabuľku rozdelenia disku"
#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Obnov tabuľku rozdelenia disku"
#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Zachrániť tabuľku rozdelenia disku"
#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Znovu načítať tabuľku rozdelenia disku"
#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "Automatické pripojenie vymeniteľného média"
#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "Vyber súbor"
#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Záložná tabuľka rozdelenia disku nemá rovnakú veľkosť\n"
"Naozaj chcete pokračovať?"
#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "Pokúšam sa zachrániť tabuľku rozdelenia disku"
#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "Detailné informácie"
#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "Zmeniť veľkosť"
#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "Formátovať"
#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "Pridať do RAID"
#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "Pridať do LVM"
#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "Odobrať z RAID"
#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "Odober z LVM"
#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "Modifikuj RAID"
#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "Použiť loopback"
#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "Vytvor nový oddiel"
#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "Začiatočný sektor:"
#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
#, c-format
msgid "Size in MB: "
msgstr "Veľkosť v MB: "
#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
#, c-format
msgid "Filesystem type: "
msgstr "Typ súborového systému: "
#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "Preferencia: "
#: diskdrake/interactive.pm:528
#, c-format
msgid "Logical volume name "
msgstr "Meno logického oddielu"
#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Nemôžete vytvoriť nový diskový oddiel\n"
"(pokiaľ máte prekročený maximálny počet primárnych oddielov).\n"
"Najskôr zrušte primárnu oddiel a vytvorte rozšírenú oddiel."
#: diskdrake/interactive.pm:588
#, c-format
msgid "Remove the loopback file?"
msgstr "Odstrániť loopback súbor?"
#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"Po zmene diskovej oblasti %s budú všetky údaje na tejto oblasti nenávratne "
"stratené"
#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "Zvoľte typ oddielu"
#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Aký typ súborového systému chcete??"
#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Prepínam z ext2 na ext3"
#: diskdrake/interactive.pm:657
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Kam si želáte pripojiť loopback súbor %s?"
#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Kam si želáte pripojiť zariadenie %s?"
#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Nemôžem odpojiť oddiel kým je používaný nejakou spätnou slučkou.\n"
"Odstráňte najskôr spätnú slučku"
#: diskdrake/interactive.pm:688
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Kam si želáte pripojiť %s?"
#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Mení sa veľkosť"
#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Počíta sa hranica FAT súborového systému"
#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "Tomuto oddielu nie je možné meniť veľkosť"
#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Všetky údaje na tejto oblasti by sa mali zazálohovať"
#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "Po zmene veľkosti oddielu %s budú všetky údaje nenávratne stratené"
#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "Zvoľte novú veľkosť"
#: diskdrake/interactive.pm:761
#, c-format
msgid "New size in MB: "
msgstr "Nová veľkosť v MB: "
#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
| 