# Cirilicni prevod drakbootdisk.po fajla.
# Copyright (C) 1997-2003 MandrakeSERBIA.
# Tomislav Jankovic <tomaja@net.yu>, 2000.
#
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
"POT-Creation-Date: 2005-07-01 15:58+0200\n"
"PO-Revision-Date: 2004-09-15 13:33+0200\n"
"Last-Translator: Toma Jankovic <tomaja@net.yu>\n"
"Language-Team: Serbian <i18n@mandrake.co.yu>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.6\n"
#: ../move/move.pm:292
#, fuzzy, c-format
msgid "Which USB key do you want to format?"
msgstr "Коју врсту уноса додајете ?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
#: ../move/move.pm:448 ../move/move.pm:460
#, fuzzy, c-format
msgid "Key is not writable"
msgstr "XawTV није инсталиран!"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr ""
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "Понови"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr ""
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1319
#, c-format
msgid "Reboot"
msgstr "Рестарт"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr ""
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr ""
#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Setting up USB key"
msgstr "Подешавам ISA PNP уређаје: "
#: ../move/move.pm:517
#, fuzzy, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "Само моменат, подешавам ниво сигурности..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr ""
#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Auto configuration"
msgstr "Custom конфигурација"
#: ../move/move.pm:556
#, fuzzy, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "Само моменат, подешавам ниво сигурности..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 fsedit.pm:209
#: install_any.pm:1725 install_any.pm:1777 install_steps.pm:81
#: install_steps_interactive.pm:37 interactive/http.pm:117
#: interactive/http.pm:118 network/ndiswrapper.pm:27 network/ndiswrapper.pm:42
#: network/ndiswrapper.pm:89 network/ndiswrapper.pm:101
#: network/netconnect.pm:810 network/netconnect.pm:914
#: network/netconnect.pm:918 network/netconnect.pm:922
#: network/netconnect.pm:927 network/netconnect.pm:1057
#: network/netconnect.pm:1061 network/netconnect.pm:1065
#: network/netconnect.pm:1069 network/netconnect.pm:1177
#: network/netconnect.pm:1182 network/netconnect.pm:1202
#: network/netconnect.pm:1355 network/thirdparty.pm:267
#: network/thirdparty.pm:274 network/thirdparty.pm:310
#: network/thirdparty.pm:312 network/thirdparty.pm:333
#: network/thirdparty.pm:357 printer/printerdrake.pm:244
#: printer/printerdrake.pm:251 printer/printerdrake.pm:276
#: printer/printerdrake.pm:422 printer/printerdrake.pm:427
#: printer/printerdrake.pm:440 printer/printerdrake.pm:450
#: printer/printerdrake.pm:514 printer/printerdrake.pm:641
#: printer/printerdrake.pm:1352 printer/printerdrake.pm:1399
#: printer/printerdrake.pm:1436 printer/printerdrake.pm:1481
#: printer/printerdrake.pm:1485 printer/printerdrake.pm:1499
#: printer/printerdrake.pm:1591 printer/printerdrake.pm:1672
#: printer/printerdrake.pm:1676 printer/printerdrake.pm:1680
#: printer/printerdrake.pm:1729 printer/printerdrake.pm:1787
#: printer/printerdrake.pm:1791 printer/printerdrake.pm:1805
#: printer/printerdrake.pm:1920 printer/printerdrake.pm:1924
#: printer/printerdrake.pm:1967 printer/printerdrake.pm:2042
#: printer/printerdrake.pm:2060 printer/printerdrake.pm:2069
#: printer/printerdrake.pm:2078 printer/printerdrake.pm:2089
#: printer/printerdrake.pm:2153 printer/printerdrake.pm:2247
#: printer/printerdrake.pm:2767 printer/printerdrake.pm:3042
#: printer/printerdrake.pm:3048 printer/printerdrake.pm:3596
#: printer/printerdrake.pm:3600 printer/printerdrake.pm:3604
#: printer/printerdrake.pm:4064 printer/printerdrake.pm:4305
#: printer/printerdrake.pm:4329 printer/printerdrake.pm:4406
#: printer/printerdrake.pm:4472 printer/printerdrake.pm:4592
#: standalone/drakTermServ:392 standalone/drakTermServ:466
#: standalone/drakTermServ:475 standalone/drakTermServ:770
#: standalone/drakTermServ:777 standalone/drakTermServ:800
#: standalone/drakTermServ:846 standalone/drakTermServ:1022
#: standalone/drakTermServ:1502 standalone/drakTermServ:1518
#: standalone/drakTermServ:1523 standalone/drakTermServ:1531
#: standalone/drakTermServ:1543 standalone/drakTermServ:1564
#: standalone/drakauth:36 standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1090 standalone/drakbackup:1122
#: standalone/drakbackup:1645 standalone/drakbackup:1801
#: standalone/drakbackup:2415 standalone/drakbackup:4104
#: standalone/drakbackup:4324 standalone/drakclock:124
#: standalone/drakconnect:672 standalone/drakconnect:676
#: standalone/drakconnect:681 standalone/drakconnect:696
#: standalone/drakfloppy:297 standalone/drakfloppy:300
#: standalone/drakfloppy:306 standalone/drakfont:210 standalone/drakfont:223
#: standalone/drakfont:261 standalone/drakgw:50 standalone/drakgw:188
#: standalone/drakgw:217 standalone/drakgw:258 standalone/drakgw:292
#: standalone/drakgw:397 standalone/drakroam:41 standalone/draksplash:15
#: standalone/drakxtv:107 standalone/finish-install:49 standalone/logdrake:168
#: standalone/logdrake:437 standalone/logdrake:442 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "Грешка"
#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"Грешка, али незнам како да је разрешим.\n"
"Наставите на ваш ризик!"
#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "Хм,појавила се грешка"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
#: ../move/move.pm:681
#, fuzzy, c-format
msgid "Remove system config files"
msgstr "Уклони loopback фајл ?"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr ""
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr ""
#: ../move/tree/mdk_totem:71
#, fuzzy, c-format
msgid "Kill those programs"
msgstr "приступ X програмима"
#: ../move/tree/mdk_totem:72
#, fuzzy, c-format
msgid "No CDROM support"
msgstr "Подршка за радио :"
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1035 diskdrake/interactive.pm:1045
#: diskdrake/interactive.pm:1098
#, c-format
msgid "Read carefully!"
msgstr "ПАЖЉИВО ПРОЧИТАЈ !"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr ""
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB или више"
#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "X сервер"
#: Xconfig/card.pm:156
#, c-format
msgid "Choose an X server"
msgstr "Изаберите X сервер"
#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr "Multi-head конфигурација"
#: Xconfig/card.pm:189
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"Ваш систем подржава multiple head конфигурацију.\n"
"Шта желите да урадите?"
#: Xconfig/card.pm:258
#, fuzzy, c-format
msgid "Can not install Xorg package: %s"
msgstr "Инсталирам пакет %s"
#: Xconfig/card.pm:268
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "Количина меморије на графичкој картици"
#: Xconfig/card.pm:345
#, c-format
msgid "Xorg configuration"
msgstr "Xorg конфигурација"
#: Xconfig/card.pm:347
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "Коју Xorg конфигурацију желите да имате ?"
#: Xconfig/card.pm:380
#, c-format
msgid "Configure all heads independently"
msgstr "Подеси све главе независно"
#: Xconfig/card.pm:381
#, c-format
msgid "Use Xinerama extension"
msgstr "Користи Xinerama екстензију"
#: Xconfig/card.pm:386
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "Подеси само картицу \"%s\"%s"
#: Xconfig/card.pm:398 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:405 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s са 3D хардверском акцелерацијом"
#: Xconfig/card.pm:407
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "Ваша картица може имати 3D хардверску акцелерацију са Xorg %s."
#: Xconfig/card.pm:413
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s са ЕКСПЕРИМЕНТАЛНОМ 3D хардверском акцелерацијом"
#: Xconfig/card.pm:415
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"Ваша картица може имати 3D хардверску акцелерацију али само са Xorg %s,\n"
"ЗАПАМТИТЕ да је ово ЕКСПЕРИМЕНТАЛНА подршка за 3D и може довести до "
"блокирања рачунара."
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:963
#, c-format
msgid "Custom"
msgstr "Избор по жељи"
#: Xconfig/main.pm:115 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:85 install_steps_interactive.pm:1319
#: printer/printerdrake.pm:744 printer/printerdrake.pm:4401
#: printer/printerdrake.pm:4853 standalone/draksplash:85
#: standalone/logdrake:173 standalone/net_applet:219
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "Крај"
#: Xconfig/main.pm:117
#, c-format
msgid "Graphic Card"
msgstr "Графичка картица"
#: Xconfig/main.pm:120 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "Монитор"
#: Xconfig/main.pm:123 Xconfig/resolution_and_depth.pm:286
#, c-format
msgid "Resolution"
msgstr "Резолуција"
#: Xconfig/main.pm:128
#, c-format
msgid "Test"
msgstr "Тест"
#: Xconfig/main.pm:133 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: standalone/drakfont:491 standalone/drakfont:553
#, c-format
msgid "Options"
msgstr "Опције"
#: Xconfig/main.pm:168
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr ""
#: Xconfig/main.pm:186
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"Сачувај промене?\n"
"Тренутна конфигурација је:\n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, fuzzy, c-format
msgid "Choose a monitor for head #%d"
msgstr "Изаберите монитор"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "Изаберите монитор"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "Plug'n Play"
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "Generic"
#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "Произвођач"
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "Plug'n Play тестирање није успело. Изаберите тачан модел монитора"
#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"Морате да наведете хоризонтални синхронизациони опсег вашег монитора.\n"
"Можете га или изабрати из унапред задатих вредности које одговарају\n"
"индустријским стандардима монитора, или да наведете одређени опсег.\n"
"\n"
"ВЕОМА ЈЕ ВАЖНО да не наведете тип монитора који има овај опсег већи него\n"
"што га има ваш монитор. Ако нисте сигурни, одаберите мање вредности."
#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "Хоризонтална фреквенција"
#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "Вертикална фреквенција"
#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 боја (8-битна палета)"
#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "32 хиљаде боја (15-битна палета)"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "65 хиљада боја (16-битна палета)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "16 милиона боја (24-битна палета)"
#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "Резолуција"
#: Xconfig/resolution_and_depth.pm:308 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:284 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1583 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "Друго"
#: Xconfig/resolution_and_depth.pm:357
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "Изаберите резолуцију и број боја при приказу"
#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Graphics card: %s"
msgstr "Графичка картица: %s"
#: Xconfig/resolution_and_depth.pm:372 interactive.pm:432
#: interactive/gtk.pm:807 interactive/http.pm:103 interactive/http.pm:156
#: interactive/newt.pm:321 interactive/newt.pm:424 interactive/stdio.pm:39
#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
#: standalone/drakTermServ:199 standalone/drakTermServ:517
#: standalone/drakbackup:1347 standalone/drakbackup:3961
#: standalone/drakbackup:4021 standalone/drakbackup:4065
#: standalone/drakconnect:158 standalone/drakconnect:848
#: standalone/drakconnect:935 standalone/drakconnect:1031
#: standalone/drakfont:574 standalone/drakfont:586 standalone/drakroam:392
#: standalone/draksplash:165 standalone/drakups:212 standalone/net_monitor:340
#: ugtk2.pm:409 ugtk2.pm:506 ugtk2.pm:908 ugtk2.pm:931
#, c-format
msgid "Ok"
msgstr "У реду"
#: Xconfig/resolution_and_depth.pm:372 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:480 install_steps_interactive.pm:422
#: install_steps_interactive.pm:831 interactive.pm:433 interactive/gtk.pm:811
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/newt.pm:428 interactive/stdio.pm:39 interactive/stdio.pm:142
#: interactive/stdio.pm:176 printer/printerdrake.pm:3676
#: standalone/drakautoinst:215 standalone/drakbackup:1347
#: standalone/drakbackup:3887 standalone/drakbackup:3891
#: standalone/drakbackup:3949 standalone/drakconnect:157
#: standalone/drakconnect:933 standalone/drakconnect:1030
#: standalone/drakfont:586 standalone/drakfont:664 standalone/drakfont:741
#: standalone/draksplash:165 standalone/drakups:219 standalone/logdrake:173
#: standalone/net_monitor:339 ugtk2.pm:403 ugtk2.pm:504 ugtk2.pm:513
#: ugtk2.pm:908
#, c-format
msgid "Cancel"
msgstr "Поништи"
#: Xconfig/resolution_and_depth.pm:372 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:228 install_steps_gtk.pm:629 interactive.pm:527
#: interactive/gtk.pm:677 interactive/gtk.pm:679 standalone/drakTermServ:284
#: standalone/drakbackup:3883 standalone/drakbug:104
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:509 standalone/drakperm:133 standalone/draksec:336
#: standalone/draksec:338 standalone/draksec:356 standalone/draksec:358
#: ugtk2.pm:1040 ugtk2.pm:1041
#, c-format
msgid "Help"
msgstr "Помоћ"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "Тестирање конфигурације"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "Да ли хоћете да тестирате конфигурацију?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "Упозорење: тестирање ове графичке картице може блокирати ваш рачунар"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"појавила се грешка:\n"
"%s\n"
"Покушајте да промените неке од параметара"
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "Излазим за %d секунди"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "Да ли је ово исправно подешено?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "Тип тастатуре: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "Тип миша: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "Миш је постављен на уређај: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "Монитор: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "Монитор - хоризонтална фреквенција: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "Монитор - вертикално освежавање: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "Графичка картица: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "Меморија на графичкој картици: %s kB\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "Број боја: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "Резолуција: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg драјвер: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "X окружење на старту"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"Ja могу подести ваш рачунар да аутоматски подиже X окружење при стартању.\n"
"Да ли желите X окружење при рестарту ?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"Ваша графичка картица изгледа да има TV-OUT конектор.\n"
"Он се може подесити да ради коришћењем frame-buffer-а.\n"
"\n"
"За ово морате да повежете вашу графичку картицу са TV-ом пре стартања вашег "
"компјутера.\n"
"Онда изаберите \"TVout\" поставку у стартеру\n"
"\n"
"Да ли имате ову опцију?"
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "Какав систем ваш TV користи?"
#: Xconfig/xfree.pm:646
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr ""
#: any.pm:142 harddrake/sound.pm:190 interactive.pm:470 pkgs.pm:458
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:245
#: standalone/service_harddrake:207
#, c-format
msgid "Please wait"
msgstr "Само моменат..."
#: any.pm:142
#, fuzzy, c-format
msgid "Bootloader installation in progress"
msgstr "Инсталација стартера"
#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "Инсталација стартера неуспела. Грешка је:"
#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"Мораћете да промените Open Firmware boot-уређај да \n"
" би могли да користите стартер. Уколико не видите промпт\n"
" при рестарту држите Command-Option-O-F при стартању и унесите:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Онда укуцајте: shut-down\n"
"Када следећи пут стартујете машину требали би да видите статеров промпт."
#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"Ви сте одлучили да инсталирате стартер на партицију.\n"
"Ово указујен ато да већ имате инсталиран стартер на хард диску који "
"бутујете.\n"
"\n"
"На који драјв се бутујете?"
#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "Први сектор диска (MBR)"
#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "Први сектор root партиције"
#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "На дискету"
#: any.pm:236 help.pm:739 printer/printerdrake.pm:4061
#, c-format
msgid "Skip"
msgstr "Прескочи"
#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub инсталација"
#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "Где бисте да инсталирате стартер?"
#: any.pm:267 standalone/drakboot:261
#, c-format
msgid "Boot Style Configuration"
msgstr "Конфигурација стила стартања"
#: any.pm:269 any.pm:301
#, c-format
msgid "Bootloader main options"
msgstr "Главне опције стартера"
#: any.pm:273
#, c-format
msgid "Give the ram size in MB"
msgstr "Прикажи величину RAM-а у Mb"
#: any.pm:275
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr ""
"Опција``Ограничена командна линика - опције'' је неупотребљива без лозинке"
#: any.pm:276 any.pm:609 authentication.pm:181
#, c-format
msgid "The passwords do not match"
msgstr "Неподударност лозинки"
#: any.pm:276 any.pm:609 authentication.pm:181 diskdrake/interactive.pm:1284
#, c-format
msgid "Please try again"
msgstr "Пробајте поново"
#: any.pm:281 any.pm:304
#, c-format
msgid "Bootloader to use"
msgstr "Стартер који ће се користити"
#: any.pm:283 any.pm:306
#, c-format
msgid "Boot device"
msgstr "Стартни (boot) уређај"
#: any.pm:285
#, c-format
msgid "Delay before booting default image"
msgstr "Пауза пре стартања default image-а"
#: any.pm:286
#, c-format
msgid "Enable ACPI"
msgstr "Омогући ACPI"
#: any.pm:288
#, fuzzy, c-format
msgid "Force no APIC"
msgstr "Обавезно No APIC"
#: any.pm:290
#, fuzzy, c-format
msgid "Force No Local APIC"
msgstr "Обавезно No APIC"
#: any.pm:292 any.pm:643 authentication.pm:186 diskdrake/smbnfs_gtk.pm:179
#: network/netconnect.pm:564 printer/printerdrake.pm:1663
#: printer/printerdrake.pm:1784 standalone/drakbackup:1627
#: standalone/drakbackup:3490 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "Лозинка"
#: any.pm:293 any.pm:644 authentication.pm:187
#, c-format
msgid "Password (again)"
msgstr "Лозинка (поновите)"
#: any.pm:294
#, c-format
msgid "Restrict command line options"
msgstr "Ограничена командна линика - опције"
#: any.pm:294
#, c-format
msgid "restrict"
msgstr "ограничено"
#: any.pm:296
#, c-format
msgid "Clean /tmp at each boot"
msgstr "Очисти /tmp при сваком стартању"
#: any.pm:297
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "Дефиниши величину RAM ако је потребно (детектовано је %d MB)"
#: any.pm:305
#, c-format
msgid "Init Message"
msgstr "Иницијална порука"
#: any.pm:307
#, c-format
msgid "Open Firmware Delay"
msgstr "Отпочни Firmware паузу"
#: any.pm:308
#, c-format
msgid "Kernel Boot Timeout"
msgstr "Пауза при стартању кернела"
#: any.pm:309
#, c-format
msgid "Enable CD Boot?"
msgstr "Омогући стартање са CD-а?"
#: any.pm:310
#, c-format
msgid "Enable OF Boot?"
msgstr "Омогући OF стартање?"
#: any.pm:311
#, c-format
msgid "Default OS?"
msgstr "Подразумевани ОС ?"
#: any.pm:364
#, c-format
msgid "Image"
msgstr "Слика"
#: any.pm:365 any.pm:375
#, c-format
msgid "Root"
msgstr "Root"
#: any.pm:366 any.pm:388
#, c-format
msgid "Append"
msgstr "Додатак"
#: any.pm:368 standalone/drakboot:263 standalone/drakboot:267
#, c-format
msgid "Video mode"
msgstr "Видео мод"
#: any.pm:370
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:371
#, fuzzy, c-format
msgid "Network profile"
msgstr "Грешка на мрежи"
#: any.pm:380 any.pm:385 any.pm:387
#, c-format
msgid "Label"
msgstr "Ознака"
#: any.pm:382 any.pm:392 harddrake/v4l.pm:358 standalone/drakfloppy:84
#: standalone/drakfloppy:90 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "Подразумевано"
#: any.pm:389
#, c-format
msgid "Initrd-size"
msgstr "Initrd-величина"
#: any.pm:391
#, c-format
msgid "NoVideo"
msgstr "NoVideo"
#: any.pm:402
#, c-format
msgid "Empty label not allowed"
msgstr "Празна ознака није дозвољена"
#: any.pm:403
#, c-format
msgid "You must specify a kernel image"
msgstr "Морате специфицирати кернелов image"
#: any.pm:403
#, c-format
msgid "You must specify a root partition"
msgstr "Морате одредити root партицију"
#: any.pm:404
#, c-format
msgid "This label is already used"
msgstr "Ова ознака је већ у употреби"
#: any.pm:418
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "Коју врсту уноса додајете ?"
#: any.pm:419
#, c-format
msgid "Linux"
msgstr "Linux"
#: any.pm:419
#, c-format
msgid "Other OS (SunOS...)"
msgstr "Други ОС-ови (SunOS,BSD,...)"
#: any.pm:420
#, c-format
msgid "Other OS (MacOS...)"
msgstr "Други ОС-ови (MacOS,BSD,...)"
#: any.pm:420
#, c-format
msgid "Other OS (Windows...)"
msgstr "Други ОС-ови (Windows,BSD,BeOS,...)"
#: any.pm:448
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"Ово су постављне опције.\n"
"Можете додати нове или изменити старе."
#: any.pm:595
#, c-format
msgid "access to X programs"
msgstr "приступ X програмима"
#: any.pm:596
#, c-format
msgid "access to rpm tools"
msgstr "приступ rpm алатима"
#: any.pm:597
#, c-format
msgid "allow \"su\""
msgstr "дозволи \"su\""
#: any.pm:598
#, c-format
msgid "access to administrative files"
msgstr "приступ административним фајловима"
#: any.pm:599
#, c-format
msgid "access to network tools"
msgstr "приступ мрежним алатима"
#: any.pm:600
#, c-format
msgid "access to compilation tools"
msgstr "приступ алатима за компајлирање"
#: any.pm:605
#, c-format
msgid "(already added %s)"
msgstr "(%s већ постоји)"
#: any.pm:610
#, c-format
msgid "This password is too simple"
msgstr "Ова лозинка је превише проста"
#: any.pm:611
#, c-format
msgid "Please give a user name"
msgstr "Одредите корисничко име"
#: any.pm:612
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "Корисничко име може садржати само мала слова, бројеве, `-' и `_'"
#: any.pm:613
#, c-format
msgid "The user name is too long"
msgstr "Корисничко име већ је предугачко"
#: any.pm:614
#, c-format
msgid "This user name has already been added"
msgstr "Ово корисничко име већ постоји"
#: any.pm:615 any.pm:646
#, c-format
msgid "User ID"
msgstr "Корисников ID"
#: any.pm:616 any.pm:647
#, c-format
msgid "Group ID"
msgstr "Групни ID"
#: any.pm:619
#, fuzzy, c-format
msgid "%s must be a number"
msgstr "Опција %s мора бити број!"
#: any.pm:620
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr ""
#: any.pm:625
#, c-format
msgid "Add user"
msgstr "Додај корисника"
#: any.pm:626
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"Унеси корисника\n"
"%s"
#: any.pm:629 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:4853
#: standalone/drakbackup:2703 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "Урађено"
#: any.pm:630 help.pm:51
#, c-format
msgid "Accept user"
msgstr "Прихвати корисника"
#: any.pm:641
#, c-format
msgid "Real name"
msgstr "Право име"
#: any.pm:642 standalone/drakbackup:1622
#, fuzzy, c-format
msgid "Login name"
msgstr "Име домена"
#: any.pm:645
#, c-format
msgid "Shell"
msgstr "Shell"
#: any.pm:649
#, c-format
msgid "Icon"
msgstr "Икона"
#: any.pm:696 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "Ауто логовање"
#: any.pm:697
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "Ја могу подести ваш рачунар да аутоматски улогује једног корисника."
#: any.pm:698
#, fuzzy, c-format
msgid "Use this feature"
msgstr "Да ли желите да користите ову опцију ?"
#: any.pm:699
#, c-format
msgid "Choose the default user:"
msgstr "Изаберите default (основног) корисника:"
#: any.pm:700
#, c-format
msgid "Choose the window manager to run:"
msgstr "Изаберите менаџер прозора који желите да користите:"
#: any.pm:712 any.pm:779
#, c-format
msgid "Please choose a language to use."
msgstr "Изаберите који језик желите да кориситите."
#: any.pm:713 any.pm:780
#, fuzzy, c-format
msgid "Language choice"
msgstr "упуство"
#: any.pm:740
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr "Можете изабрати други језик који ће бити доступан после инсталације "
#: any.pm:759 any.pm:788 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "Користи Unicode по default-у"
#: any.pm:760 help.pm:647
#, c-format
msgid "All languages"
msgstr "Сви језици"
#: any.pm:835 help.pm:566 help.pm:855 install_steps_interactive.pm:952
#, c-format
msgid "Country / Region"
msgstr "Земља"
#: any.pm:836
#, c-format
msgid "Please choose your country."
msgstr "Изаберите своју земљу."
#: any.pm:838
#, c-format
msgid "Here is the full list of available countries"
msgstr "Овде је представљена цела листа доступних земаља"
#: any.pm:839
#, fuzzy, c-format
msgid "Other Countries"
msgstr "Остали портови"
#: any.pm:839 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:393
#, c-format
msgid "Advanced"
msgstr "Напредно"
#: any.pm:847
#, fuzzy, c-format
msgid "Input method:"
msgstr "Мрежни метод:"
#: any.pm:848 install_any.pm:421 network/netconnect.pm:154
#: network/netconnect.pm:305 network/netconnect.pm:310
#: network/netconnect.pm:1168 printer/printerdrake.pm:105
#: printer/printerdrake.pm:2199
#, c-format
msgid "None"
msgstr "Неиједан"
#: any.pm:963
#, c-format
msgid "No sharing"
msgstr "Нема заједничког дељења"
#: any.pm:963
#, c-format
msgid "Allow all users"
msgstr "Дозволи све кориснике"
#: any.pm:967
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"Да ли би желели да дозволите корисницима заједнички деле неке од својих "
"директоријума?\n"
"Да би ово могли да омогућите једноставно кликните на \"Share\" у konqueror-у "
"или nautilus-у.\n"
"\n"
"\"Custom\" дозвољава детаљнија per-user подешавања.\n"
#: any.pm:979
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr ""
#: any.pm:982
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr ""
#: any.pm:990
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "Можете експортовати користећи NFS или SMB-у. Који од ова два желите"
#: any.pm:1015
#, c-format
msgid "Launch userdrake"
msgstr "Покрени userdrake"
#: any.pm:1015 printer/printerdrake.pm:3900 printer/printerdrake.pm:3903
#: printer/printerdrake.pm:3904 printer/printerdrake.pm:3905
#: printer/printerdrake.pm:5162 standalone/drakTermServ:294
#: standalone/drakbackup:4083 standalone/drakbug:127 standalone/drakfont:497
#: standalone/drakroam:242 standalone/net_monitor:118
#: standalone/printerdrake:547
#, c-format
msgid "Close"
msgstr "Затвори"
#: any.pm:1017
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"per-user дељење ресурса користи групу \"fileshare\". \n"
"Ви помоћу userdrake-а можете додати корисника у ову групу."
#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "Локална датотека"
#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"
#: authentication.pm:26
#, fuzzy, c-format
msgid "Smart Card"
msgstr "Мрежна картица"
#: authentication.pm:27 authentication.pm:152
#, c-format
msgid "Windows Domain"
msgstr "Windows Домен"
#: authentication.pm:28
#, fuzzy, c-format
msgid "Active Directory with SFU"
msgstr "Обнови све backup-ове"
#: authentication.pm:29
#, fuzzy, c-format
msgid "Active Directory with Winbind"
msgstr "Обнови све backup-ове"
#: authentication.pm:55
#, fuzzy, c-format
msgid "Local file:"
msgstr "Локалне датотеке:"
#: authentication.pm:55
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr ""
#: authentication.pm:56
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:56
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
#: authentication.pm:57
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:57
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
#: authentication.pm:58
#, c-format
msgid "Windows Domain:"
msgstr "Windows Домен:"
#: authentication.pm:58
#, c-format
msgid ""
"Winbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr ""
#: authentication.pm:59
#, fuzzy, c-format
msgid "Active Directory with SFU:"
msgstr "Обнови све backup-ове"
#: authentication.pm:59 authentication.pm:60
#, c-format
msgid ""
"Kerberos is a secure system for providing network authentication services."
msgstr ""
#: authentication.pm:60
#, fuzzy, c-format
msgid "Active Directory with Winbind:"
msgstr "Обнови све backup-ове"
#: authentication.pm:85
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP Аутентификација"
#: authentication.pm:86
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP Base dn"
#: authentication.pm:87 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "LDAP Сервер"
#: authentication.pm:100 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "једноставно"
#: authentication.pm:101
#, c-format
msgid "TLS"
msgstr "TLS"
#: authentication.pm:102
#, c-format
msgid "SSL"
msgstr "SSL"
#: authentication.pm:103
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr ""
#: authentication.pm:110 authentication.pm:148
#, fuzzy, c-format
msgid "Authentication Active Directory"
msgstr "Аутентификација"
#: authentication.pm:111 authentication.pm:150 diskdrake/smbnfs_gtk.pm:180
#, c-format
msgid "Domain"
msgstr "Домен"
#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "Сервер"
#: authentication.pm:114
#, fuzzy, c-format
msgid "LDAP users database"
msgstr "Сервер,Базе података"
#: authentication.pm:115
#, c-format
msgid "Use Anonymous BIND "
msgstr ""
#: authentication.pm:116
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr ""
#: authentication.pm:117
#, fuzzy, c-format
msgid "Password for user"
msgstr "Потребна је Лозинка"
#: authentication.pm:118
#, c-format
msgid "Encryption"
msgstr "Енкрипција"
#: authentication.pm:129
#, c-format
msgid "Authentication NIS"
msgstr "NIS Аутентификација"
#: authentication.pm:130
#, c-format
msgid "NIS Domain"
msgstr "NIS Домен"
#: authentication.pm:131
#, c-format
msgid "NIS Server"
msgstr "NIS Сервер"
#: authentication.pm:136
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"Да би ово радило са W2K PDC, вероватно ћете морати да као admin покренете: C:"
"\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add и да "
"рестартујете сервер.\n"
"Такоже ћете морати да имате username/password за Domain Admin да би "
"приступили машини која има Windows(TM) домен.\n"
"Уколико мрежа још увек није омогућена, Drakx ће покушати да приступи домену "
"након подешавања мреже.\n"
"Уколико ово подешавање не успе из неког разлога и атуентификација домена не "
"ради, покрените 'smbpasswd -j DOMAIN -U USER%%PASSWORD' користећи ваш Windows"
"(tm) Домен, и Admin Username/Password, након стартања система.\n"
"Команда 'wbinfo -t' ће тестирати да ли ваша аутентификација добра."
#: authentication.pm:148
#, c-format
msgid "Authentication Windows Domain"
msgstr "Аутентификација Windows Домена"
#: authentication.pm:153
#, c-format
msgid "Domain Admin User Name"
msgstr "Admin Корисничко име Домена"
#: authentication.pm:154
#, c-format
msgid "Domain Admin Password"
msgstr "Admin Лозинка домена"
#: authentication.pm:155
#, c-format
msgid "Use Idmap for store UID/SID "
msgstr ""
#: authentication.pm:156
#, fuzzy, c-format
msgid "Default Idmap "
msgstr "Подразумевано"
#: authentication.pm:170
#, fuzzy, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr ""
"Аргументи: (arg)\n"
"\n"
"Користи лозинку за аутентификацију корисника."
#: authentication.pm:171
#, fuzzy, c-format
msgid "Set administrator (root) password"
msgstr "Унеси root лозинку"
#: authentication.pm:172 standalone/drakvpn:1111
#, fuzzy, c-format
msgid "Authentication method"
msgstr "Аутентификација"
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:177 help.pm:722
#, c-format
msgid "No password"
msgstr "Без лозинке"
#: authentication.pm:183
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "Ова лозинка је сувише једноставна (треба да има бар %d знакова)"
#: authentication.pm:188 network/netconnect.pm:310 network/netconnect.pm:565
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "Аутентификација"
#: authentication.pm:307
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "Није могућ пренос без NIS домена"
# NOTE: this message will be displayed at boot time; that is
# only the ascii charset will be available on most machines
# so use only 7bit for this message (and do transliteration or
# leave it in English, as it is the best for your language)
#
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:753
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Dobrodosli u menadzer za startanje operativnih sistema !\n"
"\n"
"Izaberite operativni sistem, ili\n"
"sacekate za startanje pretpostavljenog OS.\n"
#: bootloader.pm:853
#, c-format
msgid "LILO with graphical menu"
msgstr "LILO са графичким менијем"
#: bootloader.pm:854
#, c-format
msgid "LILO with text menu"
msgstr "LILO са текстуалним менијем"
#: bootloader.pm:855
#, c-format
msgid "Grub"
msgstr "Grub"
#: bootloader.pm:856
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:931
#, c-format
msgid "not enough room in /boot"
msgstr "нема довољно места у /boot"
#: bootloader.pm:1403
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "Не можете да инсталирате стартер на партицију %s\n"
#: bootloader.pm:1437
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr ""
#: bootloader.pm:1450
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr ""
#: bootloader.pm:1451
#, fuzzy, c-format
msgid "Re-install Boot Loader"
msgstr "Инсталирај стартер"
#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"
#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"
#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"
#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"
#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d минута"
#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 минут"
#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d секунди"
#: common.pm:253
#, c-format
msgid "kdesu missing"
msgstr "недостаје kdesu"
#: common.pm:256
#, c-format
msgid "consolehelper missing"
msgstr "consolehelper недостаје"
#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "Аустрија"
#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "Аустралија"
#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "Белгија"
#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "Бразил"
#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "Канада"
#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "Швајцарска"
#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "Костарика"
#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "Чешка"
#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "Немачка"
#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "Данска"
#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "Естонија"
#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "Шпанија"
#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "Финска"
#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "Француска"
#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "Грчка"
#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "Мађарска"
#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "Ирска"
#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "Израел"
#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "Италија"
#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "Јапан"
#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "Холандија"
#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "Норвешка"
#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "НОви Зеланд"
#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "Пољска"
#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "Португал"
#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "Русија"
#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "Шведска"
#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "Славачка"
#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "Тајланд"
#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "Тајван"
#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "Јужна Африка"
#: crypto.pm:77 crypto.pm:107 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "САД"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV је протокол који вам омогућава да монтирате директоријум веб сервера\n"
"локално, и да га третирате као локални фајл систем (доступни веб сервер је\n"
"подешен као WebDAV сервер). Уколико желите да додате нову WebDAV тачку\n"
"монтирања, изаберите \"Нови\"."
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "Нови"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "Демонтирај"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "Монтирај"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "Тачка монтирања"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "Унесите URL WebDAV сервера"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL мора почињати са http:// или https://"
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "Сервер:"
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1177 diskdrake/interactive.pm:1252
#, c-format
msgid "Mount point: "
msgstr "Тачка монтирања: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1259
#, c-format
msgid "Options: %s"
msgstr "Опције: %s"
#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "Молим вас, прво направите копију ваших података"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"Уколико планирате да користите aboot, оставите празан простор (2048 "
"секторана почетку \n"
"диска)"
#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "чаробњак (помоћник)"
#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "Изаберите акцију"
#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"Ви имате једну велику Microsoft Windows партицију.\n"
"Предлажем да прво измените величну (resize) те партиције (кликните на њу,\n"
"а потом на \"Промени величину\")"
#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "Кликните на партицију"
#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:482
#: standalone/drakbackup:2938 standalone/drakbackup:2998
#, c-format
msgid "Details"
msgstr "Детаљи"
#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "Није пронађен хард диск"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "Journalised FS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "Swap"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Windows"
#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1192
#, c-format
msgid "Empty"
msgstr "Празно"
#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "Врста фајл система:"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "Уместо тога пробајте ``%s''"
#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "Креирај"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "Тип"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:235
#, c-format
msgid "Delete"
msgstr "Обриши"
#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "Прво урадите ``Демонтирај''"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "Изаберите другу партицију"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "Изаберите партицију"
#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "Излаз"
#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "Поништи радњу"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "Пређи на нормални мод"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "Пређи на експерт мод"
#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "Свеједно наставити ?"
#: diskdrake/interactive.pm:278
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
#: diskdrake/interactive.pm:285
#, c-format
msgid "Quit without saving"
msgstr "Крај без снимања промена"
#: diskdrake/interactive.pm:285
#, c-format
msgid "Quit without writing the partition table?"
msgstr "Крај без снимања промена у табеле партиција?"
#: diskdrake/interactive.pm:290
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "Да ли хоћете да сачувате измене у /etc/fstab?"
#: diskdrake/interactive.pm:297 install_steps_interactive.pm:329
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "Треба да ресетујете машину за примену измена у табели партиција"
#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "Очисти све"
#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "Ауто дислоцирање"
#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:121
#, c-format
msgid "More"
msgstr "Још"
#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "Информације о хард диску"
#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "Све примарне партиције су заузете"
#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "Не могу додати више ни једну партицију"
#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr ""
"Да би омогућили креирање још (extended) партиција избришите једну од "
"постојећих"
#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr ""
#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr ""
#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr ""
#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "Сачувај табелу партиција"
#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "Обнови табелу партиција"
#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "Спаси табелу партиција"
#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "Поново учитај табелу партиција"
#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "Аутомонтирање преносивог медија"
#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "Изаберите датотеку"
#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"Похрањена(снимљена) табела партиција није исте величине\n"
"Желите да наставите ?"
#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "Спасавање табеле партиција"
#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "Детаљне информације"
#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "Промени величину"
#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "Форматирање"
#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "Додај на RAID"
#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "Додај на LVM"
#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "Уклони са RAID-а"
#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "Уклони са LVM-а"
#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "Промени RAID"
#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "Користи за loopback"
#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "Креирај нову партицију"
#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "Почетни сектор: "
#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:915
#, c-format
msgid "Size in MB: "
msgstr "Величина у MB:"
#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:916
#, c-format
msgid "Filesystem type: "
msgstr "Врста татотечног система:"
#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "Карактеристике: "
#: diskdrake/interactive.pm:528
#, fuzzy, c-format
msgid "Logical volume name "
msgstr "Локална мера"
#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"Ви не можете да креирате нову партицију\n"
"(пошто сте досегли максималан број примарних партиција).\n"
"Прво уклоните примарну партицију а затим креирајте extended партицију."
#: diskdrake/interactive.pm:588
#, c-format
msgid "Remove the loopback file?"
msgstr "Уклони loopback фајл ?"
#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr ""
"После промене типа партиције %s, сви подаци на овој партицији ће бити "
"избрисани"
#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "Промена типа партиције"
#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "Коју датотечни систем желите ?"
#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "Мењам ext2 на ext3"
#: diskdrake/interactive.pm:657
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "Где бисте да монтирате loopback фајл %s?"
#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "Где бисте да монтирате %s уређај ?"
#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"Демонтирање није могуће,јер се партиција корисити за loop back.\n"
"Прво уклоните loopback"
#: diskdrake/interactive.pm:688
#, c-format
msgid "Where do you want to mount %s?"
msgstr "Где бисте да монтирате %s уређај ?"
#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "Промена величине (resizing)"
#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "Прорачунавам границе FAT датотечног система"
#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "Овој партицици није могуће променити величину"
#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "Сви подаци на овој партицији би требали бити сачувани"
#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "После промене величине %s партиције сви подаци ће бити избрисани"
#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "Изаберите нову величину"
#: diskdrake/interactive.pm:761
#, c-format
msgid "New size in MB: "
msgstr "Нова величина у MB:"
#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"Да би осигурали интегритет након промене величине партиције(а), \n"
"провера фајл система ће бити покренута када се следећи пут улогујете у "
"Windows(TM)"
#: diskdrake/interactive.pm:840
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "Изабери постојећи RAID за додавање"
#: diskdrake/interactive.pm:842 diskdrake/interactive.pm:859
#, c-format
msgid "new"
msgstr "нови"
#: diskdrake/interactive.pm:857
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "Изабери постојећи LVM за додавање"
#: diskdrake/interactive.pm:863
#, c-format
msgid "LVM name?"
msgstr "LVM име?"
#: diskdrake/interactive.pm:900
#, c-format
msgid "This partition can not be used for loopback"
msgstr "Ова партиција не може бити коришћена за loopback "
#: diskdrake/interactive.pm:913
#, c-format
msgid "Loopback"
msgstr "Loopback"
#: diskdrake/interactive.pm:914
#, c-format
msgid "Loopback file name: "
msgstr "Име Loopback датотеке: "
#: diskdrake/interactive.pm:919
#, c-format
msgid "Give a file name"
msgstr "Одредите име фајла"
#: diskdrake/interactive.pm:922
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "Фајл се већ користи од стране другог loopback-а,изаберите други"
#: diskdrake/interactive.pm:923
#, c-format
msgid "File already exists. Use it?"
msgstr "Датотека већ постоји.Да ли да га користим ?"
#: diskdrake/interactive.pm:946
#, c-format
msgid "Mount options"
msgstr "Опције монтирања"
#: diskdrake/interactive.pm:953
#, c-format
msgid "Various"
msgstr "Разно"
#: diskdrake/interactive.pm:1017
#, c-format
msgid "device"
msgstr "уређај"
#: diskdrake/interactive.pm:1018
#, c-format
msgid "level"
msgstr "ниво"
#: diskdrake/interactive.pm:1019
#, fuzzy, c-format
msgid "chunk size in KiB"
msgstr "chunk величина"
#: diskdrake/interactive.pm:1036
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "ПАЖЉИВО,ова операција је опасна."
#: diskdrake/interactive.pm:1051
#, c-format
msgid "What type of partitioning?"
msgstr "Коју врсту партиционирања?"
#: diskdrake/interactive.pm:1089
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "Морате рестартовати рачунар да би се измене извршиле"
#: diskdrake/interactive.pm:1098
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "Табела партиција за уређај %s ће бити записана на диск!"
#: diskdrake/interactive.pm:1107
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr ""
"После форматирања партиције %s,сви подаци на овој партицији ће бити избрисани"
#: diskdrake/interactive.pm:1123
#, c-format
msgid "Move files to the new partition"
msgstr "Премести фајлове на нову партицију"
#: diskdrake/interactive.pm:1123
#, c-format
msgid "Hide files"
msgstr "Сакриј фајлове"
#: diskdrake/interactive.pm:1124
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"Директоријум %s већ садржи неке податке\n"
"(%s)"
#: diskdrake/interactive.pm:1135
#, c-format
msgid "Moving files to the new partition"
msgstr "Премештање фајлова на нову партицију"
#: diskdrake/interactive.pm:1139
#, c-format
msgid "Copying %s"
msgstr "Копирање %s"
#: diskdrake/interactive.pm:1143
#, c-format
msgid "Removing %s"
msgstr "Уклањање: %s"
#: diskdrake/interactive.pm:1157
#, c-format
msgid "partition %s is now known as %s"
msgstr "партиција %s је сада позната као %s"
#: diskdrake/interactive.pm:1158
#, c-format
msgid "Partitions have been renumbered: "
msgstr ""
#: diskdrake/interactive.pm:1178 diskdrake/interactive.pm:1237
#, c-format
msgid "Device: "
msgstr "Уређај: "
#: diskdrake/interactive.pm:1179
#, fuzzy, c-format
msgid "Devfs name: "
msgstr "Име хоста:"
#: diskdrake/interactive.pm:1180
#, c-format
msgid "Volume label: "
msgstr ""
#: diskdrake/interactive.pm:1181
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "Ознака DOS партиције: %s (само претпоставка)\n"
#: diskdrake/interactive.pm:1185 diskdrake/interactive.pm:1194
#: diskdrake/interactive.pm:1255
#, c-format
msgid "Type: "
msgstr "Унеси: "
#: diskdrake/interactive.pm:1189 install_steps_gtk.pm:296
#, c-format
msgid "Name: "
msgstr "Име: "
#: diskdrake/interactive.pm:1196
#, c-format
msgid "Start: sector %s\n"
msgstr "Почетак: сектор %s\n"
#: diskdrake/interactive.pm:1197
#, c-format
msgid "Size: %s"
msgstr "Величина: %s"
#: diskdrake/interactive.pm:1199
#, c-format
msgid ", %s sectors"
msgstr ", %s сектора"
#: diskdrake/interactive.pm:1201
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "Цилиндар %d до %d\n"
#: diskdrake/interactive.pm:1202
#, c-format
msgid "Number of logical extents: %d\n"
msgstr ""
#: diskdrake/interactive.pm:1203
#, c-format
msgid "Formatted\n"
msgstr "Форматирано\n"
#: diskdrake/interactive.pm:1204
#, c-format
msgid "Not formatted\n"
msgstr "Није форматирано\n"
#: diskdrake/interactive.pm:1205
#, c-format
msgid "Mounted\n"
msgstr "Монтирано\n"
#: diskdrake/interactive.pm:1206
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"
#: diskdrake/interactive.pm:1208
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"Loopback фајл(ови): \n"
" %s\n"
#: diskdrake/interactive.pm:1209
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"Boot партиција по default-у\n"
" (за подизање MS-DOS-а, не за lilo)\n"
#: diskdrake/interactive.pm:1211
#, c-format
msgid "Level %s\n"
msgstr "Ниво %s\n"
#: diskdrake/interactive.pm:1212
#, fuzzy, c-format
msgid "Chunk size %d KiB\n"
msgstr "Chunk-уј %s\n"
#: diskdrake/interactive.pm:1213
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID-дискови %s\n"
#: diskdrake/interactive.pm:1215
#, c-format
msgid "Loopback file name: %s"
msgstr "Име Loopback датотеке: %s"
#: diskdrake/interactive.pm:1218
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"Највероватније је, да је ова партиција\n"
"Driver партиција, па не би требали\n"
"да је дирате.\n"
#: diskdrake/interactive.pm:1221
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"Ово је специјална Bootstrap\n"
"партиција и користи се\n"
"dual-booting вашег система.\n"
#: diskdrake/interactive.pm:1238
#, c-format
msgid "Read-only"
msgstr "Само-читање"
#: diskdrake/interactive.pm:1239
#, c-format
msgid "Size: %s\n"
msgstr "Величина: %s\n"
#: diskdrake/interactive.pm:1240
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "Геометрија: %s цилиндара, %s глава, %s сектора\n"
#: diskdrake/interactive.pm:1241
#, c-format
msgid "Info: "
msgstr "Инфо: "
#: diskdrake/interactive.pm:1242
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-дискови %s\n"
#: diskdrake/interactive.pm:1243
#, c-format
msgid "Partition table type: %s\n"
msgstr "Тип табеле партиција: %s\n"
#: diskdrake/interactive.pm:1244
#, c-format
msgid "on channel %d id %d\n"
msgstr "на каналу %d ID %d\n"
#: diskdrake/interactive.pm:1279
#, c-format
msgid "Filesystem encryption key"
msgstr "Кључ за енкрипцију фајл система"
#: diskdrake/interactive.pm:1280
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "Изаберите кључ за енкрипцију фајл система"
#: diskdrake/interactive.pm:1283
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr ""
"Ова лозинка(енкрипциони кључ) је сувише једноставна (треба да има бар %d "
"знакова)"
#: diskdrake/interactive.pm:1284
#, c-format
msgid "The encryption keys do not match"
msgstr "Неподударност енкрипционих кључева (лозинки)"
#: diskdrake/interactive.pm:1287 network/netconnect.pm:1013
#: standalone/drakconnect:419
#, c-format
msgid "Encryption key"
msgstr "Кључ за енкрипцију"
#: diskdrake/interactive.pm:1288
#, c-format
msgid "Encryption key (again)"
msgstr "Кључ за енкрипцију (поново)"
#: diskdrake/interactive.pm:1289 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, fuzzy, c-format
msgid "Encryption algorithm"
msgstr "Аутентификација"
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "Промена типа"
#: diskdrake/smbnfs_gtk.pm:162
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "Не могу да улогујем корисничко име %s (неисправна лозинка?)"
#: diskdrake/smbnfs_gtk.pm:166 diskdrake/smbnfs_gtk.pm:175
#, c-format
msgid "Domain Authentication Required"
msgstr "Потребна Аутентификација Домена"
#: diskdrake/smbnfs_gtk.pm:167
#, c-format
msgid "Which username"
msgstr "Које корисничко име"
#: diskdrake/smbnfs_gtk.pm:167
#, c-format
msgid "Another one"
msgstr "Још један"
#: diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr ""
"Унесите своје корисничко име, лозинку и домен да би могли да приступите "
"хосту."
#: diskdrake/smbnfs_gtk.pm:178 standalone/drakbackup:3489
#, c-format
msgid "Username"
msgstr "Корисничко име"
#: diskdrake/smbnfs_gtk.pm:204
#, c-format
msgid "Search servers"
msgstr "Тражи сервере"
#: diskdrake/smbnfs_gtk.pm:209
#, fuzzy, c-format
msgid "Search new servers"
msgstr "Тражи сервере"
#: do_pkgs.pm:16 do_pkgs.pm:31
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "Пакет %s мора бити инсталиран. Да ли желите да га инсталирате?"
#: do_pkgs.pm:21 do_pkgs.pm:36
#, c-format
msgid "Mandatory package %s is missing"
msgstr "Текући пакет %s недостаје"
#: do_pkgs.pm:182
#, c-format
msgid "Installing packages..."
msgstr "Инсталирам пакете..."
#: do_pkgs.pm:227
#, fuzzy, c-format
msgid "Removing packages..."
msgstr "Укањам %s ..."
#: fs/format.pm:57 fs/format.pm:64
#, c-format
msgid "Formatting partition %s"
msgstr "Форматирање партиције %s"
#: fs/format.pm:61
#, c-format
msgid "Creating and formatting file %s"
msgstr "Креирање и форматирање датотеке %s"
#: fs/format.pm:114
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "не знам како да форматирам %s у типу %s"
#: fs/format.pm:119 fs/format.pm:121
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s Форматирање %s није успело"
#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "Кружно монтирање %s\n"
#: fs/mount.pm:72
#, c-format
msgid "Mounting partition %s"
msgstr "Монтирам партицију %s"
#: fs/mount.pm:73
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "монтирање партиције %s у директоријум %s није успело"
#: fs/mount.pm:78 fs/mount.pm:95
#, c-format
msgid "Checking %s"
msgstr "Проверавам %s"
#: fs/mount.pm:111 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "Грешка при демонтирању %s: %s"
#: fs/mount.pm:140
#, c-format
msgid "Enabling swap partition %s"
msgstr "Омогућавам swap партицију %s"
#: fs/mount_options.pm:111
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr ""
#: fs/mount_options.pm:113
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
#: fs/mount_options.pm:116
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
#: fs/mount_options.pm:119
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr ""
#: fs/mount_options.pm:121
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
#: fs/mount_options.pm:125
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
#: fs/mount_options.pm:129
#, c-format
msgid "Mount the file system read-only."
msgstr ""
#: fs/mount_options.pm:131
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr ""
#: fs/mount_options.pm:135
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
#: fs/mount_options.pm:141
#, c-format
msgid ""
"Enable user disk quota accounting enabled, and optionally enforce limits"
msgstr ""
#: fs/mount_options.pm:143
#, c-format
msgid "Give write access to ordinary users"
msgstr ""
#: fs/mount_options.pm:145
#, c-format
msgid "Give read-only access to ordinary users"
msgstr ""
#: fs/type.pm:372
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "Не можете користити JFS за партиције мање од 16MB"
#: fs/type.pm:373
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "Не можете користити ReiserFS за партиције мање од 32MB"
#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr "са /usr"
#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "сервер"
#: fsedit.pm:210
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"Не могу прочитати табелу партиција уређај %s , много је искварена за мене :"
"(\n"
"Покушаћу даље заобилазећи лоше партицијеМогу покушати да форматирам лоше "
"партиције (СВИ ПОДАЦИ ће бити изгубљени !).\n"
"Друго решење је да се DrakX онемогући да модуфикује табелу партиција.\n"
"(грешка је %s)\n"
"\n"
"Да ли се пристајете да изгубите све партиције?\n"
#: fsedit.pm:381
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "Тачке монтирања морају да почињу са водећим /"
#: fsedit.pm:382
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "Тачке монтирања треба да садрже само алфанумеричке карактере"
#: fsedit.pm:383
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "Већ постоји партиција са тачком монтирања %s\n"
#: fsedit.pm:385
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"Изабрали сте софтверску RAID партицију као root (/).\n"
"Ниједан стартер не може да ради са тим без /boot партиције.\n"
"Зато треба да додате /boot партицију"
#: fsedit.pm:390
#, c-format
msgid "You can not use a LVM Logical Volume for mount point %s"
msgstr "Не можете користити логичку LVM партицију за тачку монтирања %s"
#: fsedit.pm:392
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
#: fsedit.pm:396 fsedit.pm:398
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "Овај директоријум треба да остане у root-у датотечног система"
#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr ""
"Потребан вам је прави датотечни систем (ext2/ext3, reiserfs, xfs, или jfs) "
"за ову тачку монтирања\n"
#: fsedit.pm:404
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "Не можете користити енкриптовани фајл систем за тачку монтирања %s"
#: fsedit.pm:465
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "Нема довољно слободног простора за ауто-алоцирање"
#: fsedit.pm:467
#, c-format
msgid "Nothing to do"
msgstr "Нема шта да се уради"
#: harddrake/data.pm:62 install_any.pm:1660
#, c-format
msgid "Floppy"
msgstr "Флопи"
#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "Зип"
#: harddrake/data.pm:88 install_any.pm:1661
#, c-format
msgid "Hard Disk"
msgstr "Диск"
#: harddrake/data.pm:97 install_any.pm:1662
#, c-format
msgid "CDROM"
msgstr "CDROM"
#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD резачи"
#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: harddrake/data.pm:127 standalone/drakbackup:2036
#, c-format
msgid "Tape"
msgstr "Трака"
#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "Видео картица"
#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr ""
#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "ТВ картица"
#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "Други мултимедијални уређаји"
#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "Звучна картица"
#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "Веб камера"
#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "Процесори"
#: harddrake/data.pm:209
#, fuzzy, c-format
msgid "ISDN adapters"
msgstr "Интерна ISDN картица"
#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr ""
#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr ""
#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr ""
#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr ""
#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr ""
#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "Мрежна картица"
#: harddrake/data.pm:282 network/netconnect.pm:479
#, c-format
msgid "Modem"
msgstr "Модем"
#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr ""
#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "Меморија"
#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr "AGP контролери"
#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:984
#, c-format
msgid "Printer"
msgstr "Штампач"
#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr ""
#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "Џојстик"
#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr "SATA контролери"
#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr "RAID контролери"
#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA контролери"
#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr "Firewire контролери"
#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr "PCMCIA контролери"
#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "SCSI контролери"
#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr "USB контролери"
#: harddrake/data.pm:420
#, fuzzy, c-format
msgid "USB ports"
msgstr ", USB штампач"
#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr "SMBus контролери"
#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr "Мостови и системски контролери"
#: harddrake/data.pm:447 help.pm:855 install_steps_interactive.pm:117
#: install_steps_interactive.pm:944 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "Тастатура"
#: harddrake/data.pm:460
#, c-format
msgid "Tablet and touchscreen"
msgstr ""
#: harddrake/data.pm:469 help.pm:855 install_steps_interactive.pm:977
#, c-format
msgid "Mouse"
msgstr "Миш"
#: harddrake/data.pm:483
#, c-format
msgid "UPS"
msgstr "UPS"
#: harddrake/data.pm:492
#, c-format
msgid "Scanner"
msgstr "Скенер"
#: harddrake/data.pm:502 standalone/harddrake2:441
#, c-format
msgid "Unknown/Others"
msgstr "Непознати/Остали"
#: harddrake/data.pm:530
#, c-format
msgid "cpu # "
msgstr "cpu # "
#: harddrake/sound.pm:190 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "Само моменат... примена конфигурације"
#: harddrake/sound.pm:226
#, c-format
msgid "No alternative driver"
msgstr "Нема алтернативног драјвера"
#: harddrake/sound.pm:227
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr ""
"Не постоји познати алтернативни OSS/ALSA драјвер за вашу звучну картицу (%s) "
"која тренутно користи \"%s\""
#: harddrake/sound.pm:233
#, c-format
msgid "Sound configuration"
msgstr "Подешавање звука"
#: harddrake/sound.pm:235
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"Овде можете изабрати алтернативни драјвер (или OSS или ALSA) за своју звучну "
"картицу (%s)."
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:240
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"Ваша картица тренутно користи %s\"%s\" драјвер (default драјвер за вашу "
"картицу је \"%s\")"
#: harddrake/sound.pm:242
#, fuzzy, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS (Отворени Систем за Звук)је био прву звучни API. Он је независан звучни "
"API у односу на оперативни систем(доступан је на већини unices система) али "
"је прилично рудименаран и ограничен API.\n"
"Чак шта више, већина драјвера као да поново откирва точак \n"
"\n"
"ALSA (Advanced Linux Sound Architecture) је модуларне архитектуре који\n"
"подржава велики број ISA, USB и PCI картица.\n"
"\n"
"Он такође обезбеђује много већи API у односу на OSS.\n"
"\n"
"Да би користили alsa, можете користи или:\n"
"- стари компатибилни OSS api\n"
"- нови ALSA api који омогућава много напредне могућности али захтева "
"коришћење ALSA библиотеке.\n"
#: harddrake/sound.pm:256 harddrake/sound.pm:341 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "Драјвер:"
#: harddrake/sound.pm:261
#, c-format
msgid "Trouble shooting"
msgstr "Помоћ "
#: harddrake/sound.pm:269 keyboard.pm:391 lang.pm:1078
#: network/ndiswrapper.pm:95 network/netconnect.pm:458
#: printer/printerdrake.pm:1206 printer/printerdrake.pm:2230
#: printer/printerdrake.pm:2316 printer/printerdrake.pm:2362
#: printer/printerdrake.pm:2429 printer/printerdrake.pm:2464
#: printer/printerdrake.pm:2773 printer/printerdrake.pm:2780
#: printer/printerdrake.pm:3740 printer/printerdrake.pm:4069
#: printer/printerdrake.pm:4189 printer/printerdrake.pm:5310
#: standalone/drakTermServ:325 standalone/drakTermServ:1135
#: standalone/drakTermServ:1196 standalone/drakTermServ:1861
#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:125
#: standalone/drakclock:224 standalone/drakconnect:969
#: standalone/drakfloppy:291 standalone/drakups:27 standalone/harddrake2:478
#: standalone/scannerdrake:51 standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "Упозорење"
#: harddrake/sound.pm:269
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
"Стари \"%s\" драјвер је на црној листи.\n"
"\n"
"Пријављено је да опструише кернел при рестартовању.\n"
"\n"
"Нови \"%s\" драјвер ће бити коришћен само при следећем стартању система."
#: harddrake/sound.pm:277
#, c-format
msgid "No open source driver"
msgstr "Нема open source драјвера"
#: harddrake/sound.pm:278
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"Не постоји бесплатан драјвер за вашу звучну картицу (%s), али постоји "
"лиценцирани драјвер на \"%s\"."
#: harddrake/sound.pm:281
#, c-format
msgid "No known driver"
msgstr "Нема познатог драјвера"
#: harddrake/sound.pm:282
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "Не постоји познати драјвер за вашу звучну картицу (%s)"
#: harddrake/sound.pm:286
#, c-format
msgid "Unknown driver"
msgstr "Непознати драјвер"
#: harddrake/sound.pm:287
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "Грешка: драјвер \"%s\" за вашу звучну картицу није приказан"
#: harddrake/sound.pm:301
#, c-format
msgid "Sound trouble shooting"
msgstr "Помоћ за подешавање звука"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:304
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"Класични тестер звука треба да покрене следеће команде:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" ће вам рећи који драјвер ваша звучна "
"картица користи \n"
"по default-у\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" ће вам рећи који је драјвер "
"тренутно\n"
"у употреби\n"
"\n"
"- \"/sbin/lsmod\" ће вам омогућити да проверите да ли његов је драјверов "
"модул\n"
"учитан или није\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" ће\n"
"вам рећи да ли су сервер за звук и alsa подешени за покретање у\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" ће вам рећи какав је ниво јачине звука\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" ће вам рећи који програм користи ѕвучну "
"картицу.\n"
#: harddrake/sound.pm:330
#, c-format
msgid "Let me pick any driver"
msgstr "Доозволи да изаберем било који уређај"
#: harddrake/sound.pm:333
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "Бирам одговарајући драјвер"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:336
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"Уколико заиста мислите да знате који је прави драјвер за вашу картицу\n"
"можете изабрати једну са горње листе.\n"
"\n"
"Тренутни драјвер за вашу \"%s\" звучну картицу је \"%s\" "
#: harddrake/v4l.pm:12 standalone/net_applet:73 standalone/net_applet:74
#: standalone/net_applet:76
#, c-format
msgid "Auto-detect"
msgstr "Ауто-детекција"
#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "Непознати|Generic"
#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "Непознати|CPH05X (bt878) [многи произвођачи]"
#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "Непознати|CPH06X (bt878) [многи произвођачи]"
#: harddrake/v4l.pm:392
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"За већину модерних ТВ картица, bttv модул GNU/Linux кернела једноставно ауто-"
"детектује праве параметре.\n"
"Уколико је картица погрешно детектована, овде можете да подесите прави "
"тјунер и тип картице. Само селектујте параметре за вашу TV картицу ако је "
"потребно"
#: harddrake/v4l.pm:395
#, c-format
msgid "Card model:"
msgstr "Модел картице :"
#: harddrake/v4l.pm:396
#, c-format
msgid "Tuner type:"
msgstr "Тип тјунера :"
#: harddrake/v4l.pm:397
#, c-format
msgid "Number of capture buffers:"
msgstr "Број capture buffer-а :"
#: harddrake/v4l.pm:397
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "број capture buffer-а за mmap'ed capture"
#: harddrake/v4l.pm:399
#, c-format
msgid "PLL setting:"
msgstr "PLL опције :"
#: harddrake/v4l.pm:400
#, c-format
msgid "Radio support:"
msgstr "Подршка за радио :"
#: harddrake/v4l.pm:400
#, c-format
msgid "enable radio support"
msgstr "омогући подршку за радио"
#: help.pm:11
#, fuzzy, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"Пре него што наставите пажљиво прочитајте услове лиценце. Она\n"
"покрива целу Mandriva Linux дистрибуцију, и уколико се слажете\n"
"са свим условима који се налазе у њој, кликните на \"Прихватам\" тастер\n"
"Уколико не прихватате, једноставно искључите \n"
"рачунар."
#: help.pm:14 install_steps_gtk.pm:552 install_steps_interactive.pm:91
#: install_steps_interactive.pm:735 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "Прихвати"
#: help.pm:17
#, fuzzy, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux је вишекориснички систем, а то значи да сваки корисник може имати "
"сопствене\n"
"поставке, сопствене фајлове, итд. Можете прочитати ``Упуство за кориснике''\n"
"да би сазнали више о томе. Али за разлику од \"root\", који је уствари "
"администратор, корисници\n"
"које додате овде неће моћи да мењају било шта осим њихових\n"
"фајлова и њихове конфигурације. Требало би да креирате најмање једног\n"
"обичног корисника за себе. Тај рачун је онај на који треба да се логујете \n"
"за рутинско коришћење. Иако је веома практично да се улогујете као \"root\" "
"сваки дан,\n"
"то може бити веома опасно! И најмања грешка може значити да ваш систем\n"
"неће више радити. Уколико направите озбиљне грешке као обични корисник \n"
"можете једино избгубити нешто информација, али не и цели систем.\n"
"\n"
"Прво, морате да унесете ваше право име. Ово није неопходно, наравно -\n"
"јер можете приступити и изменити га када год желите. DrakX ће тада узети "
"прву\n"
"реч који сте унели и ставити га у простор за уношење имена корисника \"User\n"
"name\". Ово је име које одрежени корисник треба да користи при логовању на\n"
"систем. Можете га променити. УНакон тога морате унети лозинку овде.\n"
"Обични, не-привилеговани корисничка лозинка није од већег значаја као она "
"за\n"
"\"root\" кориосника са сигурносне тачке гледања, али то није разлог за "
"опуштање\n"
"- након свега, ваши фајлови су у питању.\n"
"\n"
"Уколико кликнете на \"Прихвати корисникар\", можете додати још корисника. "
"Додајте\n"
"корисника за сваког вашег пријатеља: за вашег оца или сестру, на\n"
"пример. Када заршите додавање свих жељених корисника, изаберите \"Завршено"
"\".\n"
"\n"
"Кликом на тастер Напредно \"Напредно опције\" можете изменити default \"shell"
"\"\n"
"за тренутног корисника (bash по default). \n"
"\n"
"Када завршите са додавањем корисника, рачунар ће тражити да изаберете "
"корисника\n"
"који ће се аутоматски пријављивати на систем при његовом стартању. Уколико\n"
"вас занима ова могућност (и не водите много рачуна о локалној\n"
"сигурности), изаберите жељеног корисника и window менажер, а затим кликните "
"на \"Следећи\n"
"->\". Уколико нисте заинтересовани за ову опцију, деселектујте \"Да ли "
"желите\n"
"да користите ову опцију?\" ."
#: help.pm:51 printer/printerdrake.pm:1662 printer/printerdrake.pm:1783
#, c-format
msgid "User name"
msgstr "Корисничко име"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:233
#: install_steps_gtk.pm:694 interactive.pm:432 interactive/newt.pm:321
#: network/thirdparty.pm:323 printer/printerdrake.pm:3678
#: standalone/drakTermServ:382 standalone/drakbackup:3940
#: standalone/drakbackup:4034 standalone/drakbackup:4051
#: standalone/drakbackup:4069 ugtk2.pm:506
#, c-format
msgid "Next"
msgstr "Следећи "
#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "Да ли желите да користите ову опцију ?"
#: help.pm:54
#, fuzzy, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"Изнад се налази листа постојећих Linux партиција које су детектоване\n"
"на хард диску. Можете задржати избор који је направио чаробњак, јер је добар "
"за a\n"
"општу употребу. Уколико промените избор, морате бар изабрати root\n"
"партицију (\"/\"). Немојте да бирате сувише малу партицију јер нећете моћи "
"да\n"
"инсталирате овољно софтвера. Уколико желите да податке ставиљате на посебну "
"партицију ,\n"
"морате да изаберете и \"/home\" (могуће је уколико имате више од једне\n"
"Linux партиције).\n"
"\n"
"\n"
"Информација: свака партиција је приказана на следећи начин: \"Име\", "
"\"Капацитет\".\n"
"\n"
"\"Име\" је кодирано на следећи начин: \"тип хард диска\", \"број хард диска"
"\",\n"
"\"прој партиције\" (на пример, \"hda1\").\n"
"\n"
"\"Тип хард диска\" је \"hd\" уколико је хард диск IDE уређај и \"sd\"\n"
"уколико је SCSI хард диск.\n"
"\n"
"\"Број хард диска\" је увек слово после \"hd\" или \"sd\". За IDE хард "
"дискове:\n"
"\n"
" * \"a\" значи \"master хард диск на примарном IDE контролеру\",\n"
"\n"
" * \"b\" значи \"slave хард диск на примарном IDE контролоеру\",\n"
"\n"
" * \"c\" значи \"master хард диск на секундраном IDE контролоеру\",\n"
"\n"
" * \"d\" значи \"slave хард диск на секундарном IDE контролеру\".\n"
"\n"
"\n"
"Са SCSI хард дисковима, a \"a\" значи \"примарни хард диск\", a \"b\" "
"значи \n"
"\"секундарни хард диск \", итд..."
#: help.pm:85
#, fuzzy, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"Mandriva Linux инсталација се налази на неколико дискова илити CDROM-ова. "
"DrakX\n"
"зна уколико да уколико је селктовани пакет лоциран на другом CDROM-у и "
"избациће\n"
"тренутни CD те тражити од вас да убаците одговарајући."
#: help.pm:92
#, fuzzy, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"Сада је време да одредимо које програме желите да инсталирате на ваш\n"
"систем. Постоје хиљаде пакета доступних за инсталацију на Mandriva Linux, "
"и \n"
"да би их учинили доступнијим, смеђтени су у групе сличних апликација.\n"
"\n"
"Пакети су сортирани у групе у односу на одговарајућу употребу на вашој\n"
"машини. Саме групе су сортиране у четири класе. Ове класе можете посматрати\n"
"као контејнере за различите пакете\n"
"Можете мешати апликације из различитих контејнера, тако да\n"
"иинсталација ``Радна станица'' може да садржи апликације из \n"
"контејнера ``Развојна станица'' .\n"
"\n"
" * \"Радна станица\": уколико планирате да користите вашу машину као радну "
"станицу, изаберите једну или више одговарајућих група.\n"
"\n"
" * \"Развојна станица\": уколико машина треба да се користи за програмирање, "
"изаберите жељену(е) групу(е).\n"
"\n"
" * \"Сервер\": уколико ће се машина користити као сервер, моћи ћете да \n"
"изаберете које од најчешћих сервисажелите да инсталирате на\n"
"машину.\n"
"\n"
" * \"Графичко Окружење\": на крају, овде ћете изабрати ваше\n"
"омиљено графичко окружење. Морате изабрати бар једно да би имали\n"
"графичку радну станицу!\n"
"\n"
"Кретањем курсора миша преко имена групе добићете кратко објашњење\n"
"о тој групи. Уколико не селектујете ни једну групу када изводите\n"
"основну инсталацију (за разлику од ажурирања), појавиће се дијалог\n"
"са различитим предлозима за минималну инсталцију:\n"
"\n"
" * \"Са X-овима\": Инсталира неколико пакета ради графичког десктопа\n"
"\n"
" * \"Са основном документацијом\": Инсталира основни систем са основним "
"алатима\n"
"и њиховом дукументацијом. Овај мод је практичан за\n"
"подешавање сервера\n"
"\n"
" * \"Стварно минимална инсталација\":Инсталира само што је минимано "
"потребно,\n"
"за рад Linux система,наравно само у командној линији.Ова инсталација "
"заузима\n"
"само 65 Mb\n"
"\n"
"Можете селектовати и \"Појединачно бирање пакета\", које је корисно "
"уколико\n"
"су вам познати понуђени пакети и желите да имате потпуну \n"
"контролу над свим што ће бити инсталирано.\n"
"\n"
"Уколико сте покренули мод \"Ажурирање\", можете деселектовати све\n"
"групе да би избегли инсталацију било ког новог пакета. Ово је корисно за "
"поправљање или\n"
"ажурирање постојећег система."
#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "Радна станица"
#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "Развојна"
#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "Графичко Окружење"
#: help.pm:146 install_steps_gtk.pm:231 install_steps_interactive.pm:642
#, c-format
msgid "Individual package selection"
msgstr "Појединачно бирање пакета"
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "Ажурирање"
#: help.pm:146 install_steps_interactive.pm:600
#, c-format
msgid "With X"
msgstr "Са X-овима"
#: help.pm:146
#, fuzzy, c-format
msgid "With basic documentation"
msgstr "Са основном документацијом (препорука!)"
#: help.pm:146
#, fuzzy, c-format
msgid "Truly minimal install"
msgstr "Минимално инсталирај"
#: help.pm:149
#, fuzzy, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
"На крају, у зависности од вашег избора да да бирате појединачне пакете\n"
"или не, биће вам приказано стабло са свим пакетима класификованим\n"
"по групама и подгрупама. Док претражујете стабло, можете селектовати целе\n"
"групе, подгрупе, или индивидуалне пакете.\n"
"\n"
"Када код селектујете пакет на стаблу, опис се појављује са десне\n"
"стране. да би могли да се упознате наменом пакета.\n"
"\n"
"!! Уколико је сервер пакет изабран случајно или као део\n"
"целе групе, бићете упитани да ли заиста желите да инсталирате\n"
"понуђене сервере. Под Mandriva Linux-ом, сви инсталирани\n"
"сервери се стартују по default-у за време подизања система. Чак и ако су "
"сигурни и немају\n"
"познатих безбедносних пропуста до времена изласка дистрибуције, може се "
"десити\n"
"да сигурносне рупе буду откивене касније.\n"
" Уколико не знате који појединачни сервис шта треба да ради\n"
"или зашто се инсталира, онда кликните \"Не\". Кликом на \"Да\" ћете\n"
"инсталирати приказане сервис и они ће бити покренути аутоматски по\n"
"default-у. !!\n"
"\n"
"Опција \"Аутоматске међузависности\" једноставно искључује дијалог са "
"упозорењем\n"
"који се јавља сваки пут када инсталер аутоматски селектује пакете. Ово се\n"
"јавља зато што он одређује да мора да задовољи зависности са другим\n"
"пакетом да би успешно завршио инсталацију.\n"
"\n"
"Мала иконица флопи диска на дну листе вам омогућава да учитате\n"
"листу пакета биране током претходне инсталације. Кликом на ову иконицу\n"
"ће од вас бити тражено да убаците дискету креирану раније на крају \n"
"претходне инсталације. Погледајте последњи пасус (корак) да би научили како "
"да креирате \n"
"такву дискету."
#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:899
#: interactive.pm:157 modules/interactive.pm:71 standalone/drakbackup:2503
#: standalone/draksec:54 standalone/harddrake2:308 standalone/net_applet:295
#: ugtk2.pm:907 wizards.pm:156
#, c-format
msgid "No"
msgstr "Не"
#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:899 interactive.pm:157
#: modules/interactive.pm:71 printer/printerdrake.pm:743
#: standalone/drakbackup:2503 standalone/draksec:55 standalone/harddrake2:307
#: standalone/net_applet:299 ugtk2.pm:907 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "Да"
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr ""
#: help.pm:183
#, fuzzy, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"Штампач\": ако кликнете на тастер \"Без штампача\" покренути ћете "
"конфигурациони\n"
"програм за штампаче. Погледајте и одговоарајуће упуство у``Starter\n"
"Guide'' за више информација о томе како да подесите нови штампач. Програм "
"које се\n"
"тада активира је сличан оном који се користи током инсталације."
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:607
#: standalone/drakbackup:2327 standalone/drakbackup:2331
#: standalone/drakbackup:2335 standalone/drakbackup:2339
#, c-format
msgid "Configure"
msgstr "Подеси"
#: help.pm:189
#, fuzzy, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"Сада можете одабрати које сервисе желите да се стартају при подизању "
"система.\n"
"\n"
"DrakX ће приказати све доступни сервисе на тренутној\n"
"инсталацији. Прегледајте их пажљиво и деселектујте оне који вам неће бити "
"увек\n"
"потребни при подизању система.\n"
"\n"
"Можете добити и кратко објашњење о сервису селектовањем\n"
"одређеног сервиса. Међутим, уколико нисте сигурни који од сервиса јесу или\n"
"нису корисни, сигурније је оставити на default поставкама.\n"
"\n"
"!!На овом нивоу, будите веома пажљиви уколико желите да користите вашу "
"машину као\n"
"сервер: вероватно нећете желети да стартујете ниједан сервис који вам неће\n"
"требати. Запамтите да неколико сервиса може бити опасно уколико\n"
"су омогућени на серверу. Генерано говорећи, изаберите само сервисе које ћете "
"стварно требати.\n"
"!!"
#: help.pm:206
#, fuzzy, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
"GNU/Linux управља са временом у GMT (Greenwich Mean Time) и преводи га у\n"
"локално време у зависности коју сте временску зону изабрали. Међути, могуће "
"је\n"
"ово и деактивирати деселектовањем \"Подеси хардверски часовник на GMT\" тако "
"да хардверски часовник\n"
"хаима исто време као и системски часовник. Ово је корисно када на машини "
"имате\n"
"још један оперативни систем као што је Windows.\n"
"\n"
"Опција \"Аутоматска сихронизација часовника\" ће аутоматски регулисати\n"
"часовник конектовањем на удаљени временски сервер на Интернету. На \n"
"листи која је приказана, изаберите сервер који се налази близу вас. "
"Наравно,\n"
"морате имати исправно подешену Интернет конекцију да би могли да користите "
"ову опцију. Она ће\n"
"уствари инсталирати на вашу машину временски сервер који се помогућности "
"може користити и од\n"
"стране других машина на вашој локалној мрежи."
#: help.pm:217 install_steps_interactive.pm:879
#, c-format
msgid "Hardware clock set to GMT"
msgstr "Ваш системски (BIOS) часовник је подешен на GMT"
#: help.pm:217
#, fuzzy, c-format
msgid "Automatic time synchronization"
msgstr "Аутоматска синхронизација времена (преко NTP-а)"
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"Графичка картица\n"
"\n"
" Програм за инсталацију обично аутоматски детектује и подешава\n"
"графичку карту која је инсталирана у вашој машини. Уколико то није случај, "
"можете\n"
"да је изаберете сами са листе понуђених картица.\n"
"\n"
" У случају да је више графичких сервера доступно за вашу картицу, са или\n"
"без 3D акцелерације, онда сами одаберите ону која најбоље одговара\n"
"вашим потребама."
#: help.pm:231
#, fuzzy, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"X (или X Window Систем) је срце GNU/Linux графичког интерфејса\n"
"на који се ослањају сва графичка окружења (KDE, GNOME, AfterStep,\n"
"WindowMaker, итд.) која се налазе у Mandriva Linux-у.\n"
"\n"
"Биће вам приказана листа са различитим параметрима чијом изменом\n"
"можете добити оптималан графички приказ: Графичка картица\n"
"\n"
"\n"
" Програм за инсталацију обично аутоматски детектује и подешава\n"
"графичку карту која се налази у вашем рачуну. Уколико то није случај, "
"можете\n"
"сами да изаберете картицу са листе.\n"
"\n"
" Уколико су различити сервери доступни за вашу картицу, са или\n"
"вез 3D акцелерације, онда треба да изаберете онај који највише\n"
"одговара вашим потребама.\n"
"\n"
"\n"
"\n"
"Монитор\n"
"\n"
" Програм за инсталацију обично аутоматски детектује и подешава\n"
"монитор који повезан са вашим рачунаром. Уколико се то не деси можете "
"изабрати\n"
"сами са листе понуђених монитора\n"
"\n"
" Овде можете изабрати резолуцију и број боја од\n"
"оних које су понуђене за ваш хардвер. Изаберите оно што највише одговара "
"вашим потребама\n"
"(ове опције ћете моћи изменити и након инсталације). Изабрана\n"
"конфигурације се види на монитору.\n"
"\n"
"\n"
"\n"
"Тест\n"
"\n"
" систем ће покушати да отвори графички екран у жељеној\n"
"резолуцији. Уколико можете да видите поруку током теста одговорите са \"Да"
"\",\n"
"и DrakX ће наставити са следећим кораком. Уколико не можете да видите "
"поруку, то\n"
"значи да је неки део аутотедекције био неправилан и\n"
"тест ће аутоматски завршити након 12 секунди, отаварајући мени за\n"
"конфигурацију. Измените опције све док не добијете коректан графички "
"приказ.\n"
"\n"
"\n"
"\n"
"Опције\n"
"\n"
" Овде можете да изаберете да ли желите да ваш рачуанр аутоматски\n"
"пређе на графички интерфејс при стартању. Очигледно, изабраћете\n"
"\"Не\" уколико је ваша машина сервер, или уколико нисте успели да успешно \n"
"подесите графички приказ."
#: help.pm:288
#, fuzzy, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
|