Update Installer translations

1 files changed, 3172 insertions, 2162 deletions

diff --git a/docs/docs/stable/installer/cs.po b/docs/docs/stable/installer/cs.po
index 6fcf0265..4bc64f78 100644
--- a/docs/docs/stable/installer/cs.po
+++ b/docs/docs/stable/installer/cs.po
@@ -17,7 +17,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Mageia\n"
 "Report-Msgid-Bugs-To: doc-discuss@ml.mageia.org\n"
-"POT-Creation-Date: 2018-04-19 16:32+0300\n"
+"POT-Creation-Date: 2019-01-06 12:43+0200\n"
 "PO-Revision-Date: 2018-02-04 10:32+0000\n"
 "Last-Translator: fri\n"
 "Language-Team: Czech (http://www.transifex.com/MageiaLinux/mageia/language/"
@@ -29,12 +29,12 @@ msgstr ""
 "Plural-Forms: nplurals=3; plural=(n==1) ? 0 : (n>=2 && n<=4) ? 1 : 2;\n"
 
 #. type: Content of: <section><info><title>
-#: en/acceptLicense.xml:25
+#: en/acceptLicense.xml:31
 msgid "License and Release Notes"
 msgstr "Licence a poznámky k vydání"
 
 #. type: Content of: <section><mediaobject>
-#: en/acceptLicense.xml:29
+#: en/acceptLicense.xml:35
 #, fuzzy
 msgid ""
 "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" xml:id="
@@ -50,82 +50,88 @@ msgstr ""
 "\"live-license.png\"/> </imageobject>"
 
 #. type: Content of: <section><section><info><title>
-#: en/acceptLicense.xml:40
+#: en/acceptLicense.xml:46
 msgid "License Agreement"
 msgstr "Licenční ujednání"
 
-#. type: Content of: <section><section><para>
-#: en/acceptLicense.xml:43
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/acceptLicense.xml:51
+#, fuzzy
 msgid ""
-"Before installing <application>Mageia</application>, please read the license "
-"terms and conditions carefully."
+"Before installing Mageia, please read the license terms and conditions "
+"carefully."
 msgstr ""
 "Před instalací <application>Mageii</application>, si pečlivě přečtěte "
 "licenční podmínky a ustanovení."
 
-#. type: Content of: <section><section><para>
-#: en/acceptLicense.xml:46
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/acceptLicense.xml:56
+#, fuzzy
 msgid ""
-"These terms and conditions apply to the entire <application>Mageia</"
-"application> distribution and must be accepted before you can continue."
+"These terms and conditions apply to the entire Mageia distribution and must "
+"be accepted before you can continue."
 msgstr ""
 "Tyto podmínky a ujednání se vztahují na celou distribuci "
 "<application>Mageia</application>, dříve než budete moci pokračovat, musí "
 "být přijaty."
 
-#. type: Content of: <section><section><para>
-#: en/acceptLicense.xml:50
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/acceptLicense.xml:61
 #, fuzzy
 msgid ""
-"To proceed, simply select <guilabel>Accept</guilabel> and then click on "
-"<guibutton>Next</guibutton>."
+"To proceed, simply select <emphasis>Accept</emphasis> and then click on "
+"<emphasis>Next</emphasis>"
 msgstr ""
 "Chcete-li je přijmout, jednoduše vyberte <guilabel>Přijmout</guilabel> a "
 "poté klepněte na <guibutton>Další</guibutton>."
 
 #. type: Content of: <section><section><para>
-#: en/acceptLicense.xml:53
+#: en/acceptLicense.xml:66
+#, fuzzy
 msgid ""
-"If you decide not to accept these conditions, then we thank you for looking. "
-"Clicking <guibutton>Quit</guibutton> will reboot your computer."
+"If you decide not to accept these conditions, then we thank you for your "
+"interest in Mageia. Clicking <emphasis>Quit</emphasis> will reboot your "
+"computer."
 msgstr ""
 "Pokud se rozhodnete nepřijmout tyto podmínky, pak vám děkujeme za "
 "nahlédnutí. Klepnutím na <guibutton>Ukončit</guibutton> se restartuje "
 "počítač."
 
 #. type: Content of: <section><section><info><title>
-#: en/acceptLicense.xml:63
+#: en/acceptLicense.xml:76
 msgid "Release Notes"
 msgstr "Poznámky k vydání"
 
 #. type: Content of: <section><section><para>
-#: en/acceptLicense.xml:70
+#: en/acceptLicense.xml:83
 #, fuzzy
 msgid ""
-"Important information about this release of <application>Mageia</"
-"application> can be viewed by clicking on the <guibutton>Release Notes</"
-"guibutton> button."
+"Important information about this particular Mageia release can be viewed by "
+"clicking on the <emphasis>Release Notes</emphasis> button."
 msgstr ""
 "Jsou dostupné důležité informace o tomto vydání <application>Mageia</"
 "application> a jsou dostupné klepnutím na tlačítko <guibutton>Poznámky k "
 "vydání</guibutton>."
 
 #. type: Attribute 'xml:lang' of: <section>
-#: en/add_supplemental_media.xml:1 en/DrakLive-cover.xml:2 en/DrakLive.xml:1
-#: en/DrakX-cover.xml:1 en/DrakX.xml:1 en/media_selection.xml:1
+#: en/add_supplemental_media.xml:1 en/DrakLive-cover.xml:2 en/DrakLive.xml:2
+#: en/DrakX-cover.xml:3 en/DrakX.xml:3 en/media_selection.xml:2
 msgid "en"
 msgstr "cs"
 
 #. type: Content of: <section><info><title>
 #: en/add_supplemental_media.xml:3
-msgid "Media Selection (Configure Supplemental Installation Media)"
+#, fuzzy
+msgid "Supplemental Installation Media"
 msgstr "Výběr zdroje (nastavení doplňkových instalačních zdrojů)"
 
 #.  papoteur 2013-04-13  - created 
 #.  marja 2013-04-16 added screenshot and expanded title (because is was the same as for media_selection 
 #.  marja 2013-04-16 s/a optical/an optcal/ s/support/disc/ s/or or/or/ s/at/during/ as suggested by Tristan Campbell 
+#. 2018/02/10 apb: Text and typgraphy.
+#. 2018/02/16 apb: Update dx2-add_supplemental_media.png to Mga6
 #. type: Content of: <section><mediaobject>
-#: en/add_supplemental_media.xml:14
+#: en/add_supplemental_media.xml:18
 #, fuzzy
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-add_supplemental_media."
@@ -137,13 +143,13 @@ msgstr ""
 "add_supplemental_media-im1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/add_supplemental_media.xml:19
+#: en/add_supplemental_media.xml:23
 #, fuzzy
 msgid ""
-"This screen shows you the list of already recognized repositories. You can "
-"add other sources for packages, like an optical disc or a remote source.  "
+"This screen shows you the list of already recognised repositories. You can "
+"add other sources for packages, like an optical-disc or a remote source.  "
 "The source selection determines which packages will be available during the "
-"next steps."
+"subsequent steps."
 msgstr ""
 "Tato obrazovka vám dává seznam již rozeznaných úložišť. Můžete přidat další "
 "zdroje balíčků, jako je optický disk nebo vzdálené zdroje. Výběr zdroje "
@@ -151,25 +157,25 @@ msgstr ""
 "balíčků."
 
 #. type: Content of: <section><para>
-#: en/add_supplemental_media.xml:24
+#: en/add_supplemental_media.xml:28
 msgid "For a network source, there are two steps to follow:"
 msgstr "Pro síťové zdroje, jsou zapotřebí dva nasáledijící kroky:"
 
 #. type: Content of: <section><orderedlist><listitem><para>
-#: en/add_supplemental_media.xml:28
-msgid "Choosing and activation of the network, if not already up."
+#: en/add_supplemental_media.xml:32
+#, fuzzy
+msgid "Choosing and activating the network, if not already up."
 msgstr "Výběr a aktivace sítě, není-li již spuštěna."
 
 #. type: Content of: <section><orderedlist><listitem><para>
-#: en/add_supplemental_media.xml:32
+#: en/add_supplemental_media.xml:36
 #, fuzzy
 msgid ""
 "Selecting a mirror or specifying a URL (very first entry). By selecting a "
 "mirror, you have access to the selection of all repositories managed by "
-"Mageia, like the <emphasis role=\"bold\">Nonfree</emphasis>, the <emphasis "
-"role=\"bold\">Tainted</emphasis> repositories and the <emphasis role=\"bold"
-"\">Updates</emphasis>. With the URL, you can designate a specific repository "
-"or your own NFS installation."
+"Mageia, like the <emphasis>Nonfree</emphasis>, the <emphasis>Tainted</"
+"emphasis> repositories and the <emphasis>Updates</emphasis>. With the URL, "
+"you can designate a specific repository or your own NFS installation."
 msgstr ""
 "Výbrat zrcadlo nebo zadat adresu URL (první vstup). Výběrem některého ze "
 "zrcadel, budete mít přístup k nabídkám všech úložišť spravovaných Mageia, "
@@ -177,15 +183,15 @@ msgstr ""
 "konkrétní úložiště nebo vlastní instalaci NFS."
 
 #. type: Content of: <section><note><para>
-#: en/add_supplemental_media.xml:42
+#: en/add_supplemental_media.xml:46
 #, fuzzy
 msgid ""
-"If you are updating a 64 bit installation which may contain some 32 bit "
+"If you are updating a 64-bit installation which may contain some 32-bit "
 "packages, it is advised to use this screen to add an online mirror by "
-"ticking one of the Network protocols here. The 64-bit DVD ISO only contains "
-"64-bit and noarch packages, it will not be able to update the 32-bit "
-"packages. However, after adding an online mirror, the installer will find "
-"the needed 32-bit packages there."
+"selecting one of the Network protocols here. The 64-bit DVD ISO only "
+"contains 64-bit and <emphasis>noarch</emphasis> packages, it will not be "
+"able to update the 32-bit packages. However, after adding an online mirror, "
+"the installer will find the needed 32-bit packages there."
 msgstr ""
 "Pokud aktualizujete 64 bitovou instalaci, která může obsahovat některé 32 "
 "bitové balíčky, doporučuje se použít tuto obrazovku pro přidání "
@@ -195,18 +201,25 @@ msgstr ""
 "zrcadlového serveru tam instalátor najde potřebné 32 bitové balíčky."
 
 #. type: Content of: <section><info><title>
-#: en/addUser.xml:3
-msgid "User and Superuser Management"
-msgstr "Správa uživatele  a superuživatele"
+#: en/addUser.xml:9
+#, fuzzy
+msgid "User Management"
+msgstr "Rozšířená správa uživatelů"
 
 #.  Lebarhon: 20170210 updated for Mageia 6 (umask)
+#. 2018/02/12 apb: Text and Typography.
+#. 2018/02/19 apb: Update dx2-setRootPassword.png to Mga6.
+#. 2018/02/21 apb: Changed title from 'User and Superuser Management' to 'User Management'. Docteam approved (plus, the SC title is User Management).
+#.   Also changed 'Advanced User Management' to 'User Management (advanced)'.
+#. 2018/02/24 apb: Changed list style.
 #. type: Content of: <section><mediaobject>
-#: en/addUser.xml:9
+#: en/addUser.xml:24
+#, fuzzy
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
-"\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id="
-"\"setRootPassword-im1\"/> </imageobject> <imageobject> <imagedata format="
-"\"PNG\" fileref=\"live-user1.png\"/> </imageobject>"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-setRootPassword.png\" format=\"PNG\" revision=\"1\" xml:id="
+"\"setRootPassword-im1\"/> </imageobject> <imageobject> <imagedata fileref="
+"\"live-user1.png\" format=\"PNG\"/> </imageobject>"
 msgstr ""
 "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
 "\"dx2-setRootPassword.png\" align=\"center\" revision=\"1\" xml:id="
@@ -214,21 +227,21 @@ msgstr ""
 "\"PNG\" fileref=\"live-user1.png\"/> </imageobject>"
 
 #. type: Content of: <section><section><info><title>
-#: en/addUser.xml:20
+#: en/addUser.xml:36
 msgid "Set Administrator (root)  Password:"
 msgstr "Nastavení hesla správce (uživatele root):"
 
 #. type: Content of: <section><section><para>
-#: en/addUser.xml:24
+#: en/addUser.xml:40
 #, fuzzy
 msgid ""
-"It is advisable for all <application>Mageia</application> installations to "
-"set a <emphasis role=\"bold\">superuser</emphasis> (administrator) password, "
-"usually called the <emphasis>root password</emphasis> in Linux. As you type "
-"a password into the top box a shield will change from red to yellow to green "
-"depending on the strength of the password. A green shield shows you are "
-"using a strong password. You need to repeat the same password in the box "
-"underneath, to check that the first entry was not mistyped."
+"It is advisable for all Mageia installations to set a <literal>superuser</"
+"literal> (Administrator) password, usually called the <emphasis>root </"
+"emphasis>password in Linux. As you type a password into the top box a shield "
+"will change from red-to-yellow-to-green depending on the strength of the "
+"password. A green shield shows you are using a strong password. You need to "
+"repeat the same password in the box underneath, to check that the first "
+"entry was not mistyped."
 msgstr ""
 "Pro všechny instalace <application>Mageii</application> se doporučuje "
 "nastavit heslo superuživatele anebo správce, které se v Linuxu obyčejně "
@@ -240,98 +253,119 @@ msgstr ""
 "neudělali překlep."
 
 #. type: Content of: <section><section><note><para>
-#: en/addUser.xml:34
+#: en/addUser.xml:49
 #, fuzzy
 msgid ""
-"All passwords are case sensitive. It is best to use a mixture of letters "
+"All passwords are case-sensitive. It is best to use a mixture of letters "
 "(upper and lower case), numbers and other characters in a password."
 msgstr ""
 "Všechna hesla jsou závislá na velikosti písmen; nejlepší je použít kombinaci "
 "písmen (velkých a malých), čísel a ostatních znaků."
 
 #. type: Content of: <section><section><info><title>
-#: en/addUser.xml:42
+#: en/addUser.xml:57
 msgid "Enter a user"
 msgstr "Zadejte uživatele"
 
 #. type: Content of: <section><section><para>
-#: en/addUser.xml:45
+#: en/addUser.xml:60
 #, fuzzy
 msgid ""
-"Add a user here. A regular user has fewer privileges than the <emphasis role="
-"\"bold\">superuser</emphasis> (root), but enough to use the internet, office "
-"applications or play games and anything else the average user might use "
-"their computer for."
+"Add a User here. A regular user has fewer privileges than the "
+"<literal>superuser</literal> (root), but enough to use the Internet, office "
+"applications or play games and anything else the average user might use a "
+"computer for."
 msgstr ""
 "Zde přidejte uživatele. Uživatel má méně oprávnění než superuživatel (root), "
 "ale dost na procházení internetu, používání kancelářskych aplikací anebo "
 "hraní her a pro cokoli jiného, co se svým počítačem provádí běžný uživatel."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/addUser.xml:52
-msgid ""
-"<guibutton>Icon</guibutton>: if you click on this button it will change the "
-"user's icon."
+#: en/addUser.xml:67
+#, fuzzy
+msgid "<emphasis role=\"bold\">Icon</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/addUser.xml:69
+#, fuzzy
+msgid "Click on this button if you want to change the user's icon"
 msgstr ""
 "<guibutton>Ikona</guibutton>: Pokud klepnete na toto tlačítko, změní se "
 "ikona uživatele."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/addUser.xml:57
-msgid ""
-"<guilabel>Real Name</guilabel>: Insert the user's real name into this text "
-"box."
+#: en/addUser.xml:74
+#, fuzzy
+msgid "<emphasis role=\"bold\">Real Name</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/addUser.xml:76
+#, fuzzy
+msgid "Insert the user's real name into this text box"
 msgstr ""
 "<guilabel>Skutečné jméno</guilabel>: Vložte do tohoto textového pole "
 "skutečné jméno uživatele."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/addUser.xml:62
+#: en/addUser.xml:80
+#, fuzzy
+msgid "<emphasis role=\"bold\">Login Name</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/addUser.xml:82
 #, fuzzy
 msgid ""
-"<guilabel>Login Name</guilabel>: Enter the user login name or let DrakX use "
-"a version of the user's real name. <emphasis role=\"bold\">The login name is "
-"case sensitive.</emphasis>"
+"Enter the user login name or let DrakX use a version of the user's real "
+"name. <emphasis role=\"bold\">The login name is case-sensitive.</emphasis>"
 msgstr ""
 "<guilabel>Přihlašovací jméno</guilabel>: Zde můžete zadat uživatelské "
 "přihlašovací jméno, nebo nechat instalační program pokusit se použít "
 "skutečné jméno uživatele. <emphasis>Přihlašovací jméno je citlivé na "
 "velikost písmen.</emphasis>"
 
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/addUser.xml:88 en/setupBootloader.xml:87
+#, fuzzy
+msgid "<emphasis role=\"bold\">Password</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/addUser.xml:67
+#: en/addUser.xml:90
 #, fuzzy
 msgid ""
-"<guilabel>Password</guilabel>: Type in the user password. There is a shield "
-"at the end of the text box that indicates the strength of the password. (See "
-"also <xref linkend=\"givePassword\"/>)"
+"Type in the user password. There is a shield at the end of the text box that "
+"indicates the strength of the password. (See also <xref linkend="
+"\"givePassword\"/>)"
 msgstr ""
 "<guilabel>Heslo</guilabel>: Do tohoto textového pole byste měli napsat heslo "
 "uživatele. Na konci textového políčka je štít, který naznačuje sílu heslu. "
 "(Podívejte se i na <xref linkend=\"givePassword\"/>)"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/addUser.xml:73
+#: en/addUser.xml:94
 #, fuzzy
 msgid ""
-"<guilabel>Password (again)</guilabel>: Retype the user password DrakX will "
-"check that you have not mistyped the password."
+"<emphasis role=\"bold\">Password (again):</emphasis> Retype the user "
+"password. DrakX will check that you have not mistyped the password."
 msgstr ""
 "<guilabel>Heslo (znovu)</guilabel>: Znovu zadejte heslo a drakx zkontroluje, "
 "zda odpovídá heslu zadanému výše."
 
 #. type: Content of: <section><section><note><para>
-#: en/addUser.xml:79
+#: en/addUser.xml:101
 #, fuzzy
 msgid ""
-"Any users you added while installing Mageia, will have a home directory that "
-"is both read and write protected (umask=0027)."
+"Any users added while installing Mageia, will have a home directory that is "
+"both read and write protected (umask=0027)"
 msgstr ""
 "Jakýkoliv uživatel přidaný v průběhu instalace Mageii bude mít chráněn "
 "domovský adresář proti čtení a zápisu (umask=0027)"
 
 #. type: Content of: <section><section><note><para>
-#: en/addUser.xml:82
+#: en/addUser.xml:104
 #, fuzzy
 msgid ""
 "You can add any extra needed users in the <emphasis>Configuration - Summary</"
@@ -343,60 +377,60 @@ msgstr ""
 "emphasis>."
 
 #. type: Content of: <section><section><note><para>
-#: en/addUser.xml:86
+#: en/addUser.xml:108
 msgid "The access permissions can also be changed after the install."
 msgstr "Přístupová oprávnění lze změnit také po instalaci."
 
 #. type: Content of: <section><section><info><title>
-#: en/addUser.xml:93
-msgid "Advanced User Management"
+#: en/addUser.xml:115
+#, fuzzy
+msgid "User Management (advanced)"
 msgstr "Rozšířená správa uživatelů"
 
 #. type: Content of: <section><section><para>
-#: en/addUser.xml:96
+#: en/addUser.xml:118
 #, fuzzy
 msgid ""
-"The <guibutton>Advanced</guibutton> option allows you to edit further "
-"settings for the user you are adding."
+"The <emphasis>Advanced</emphasis> option allows you to edit further settings "
+"for the user you are adding."
 msgstr ""
 "Pokud klepnete na tlačítko <guibutton>pokročilé</guibutton>, bude vám "
 "nabídnuta obrazovka, která vám dovoluje upravovat nastavení pro uživatele, "
 "kterého přidáváte."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/addUser.xml:101
+#: en/addUser.xml:123
 #, fuzzy
 msgid ""
-"<guilabel>Shell</guilabel>: This drop-down list allows you to change the "
+"<emphasis>Shell</emphasis>: This drop-down list allows you to change the "
 "shell available to any user you added in the previous screen. Options are "
-"<emphasis role=\"bold\">Bash</emphasis>, <emphasis role=\"bold\">Dash</"
-"emphasis> and <emphasis role=\"bold\">Sh</emphasis>"
+"<literal>Bash</literal>, <literal>Dash</literal> and <literal>Sh</literal>"
 msgstr ""
 "<guilabel>Shell</guilabel>: Tento rozbalovací seznam vám umožňuje změnit "
 "shell (překladač příkazů) používaný uživatelem, kterého přidáváte na "
 "předchozí obrazovce, možnostmi jsou Bash, Dash a Sh."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/addUser.xml:107
+#: en/addUser.xml:130
 #, fuzzy
 msgid ""
-"<guilabel>User ID</guilabel>: Here you can set the <emphasis role=\"bold"
-"\">user ID</emphasis> for any user you added in the previous screen. If you "
-"are unsure what the purpose of this is, then leave it blank."
+"<emphasis>User ID</emphasis>: Here you can set the user ID for any user you "
+"added in the previous screen. If you are unsure what the purpose of this is, "
+"then leave it blank."
 msgstr ""
 "<guilabel>ID uživatele</guilabel>: Zde můžete nastavit uživatelovo ID pro "
 "uživatele, kterého přidáváte na předchozí obrazovce. Je to číslo. Ponechejte "
 "je prázdné, pokud nevíte, co děláte."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/addUser.xml:113
+#: en/addUser.xml:136
 msgid ""
-"<guilabel>Group ID</guilabel>: This lets you set the <emphasis role=\"bold"
-"\">group ID</emphasis>. Again, if unsure, leave it blank."
+"<emphasis>Group ID</emphasis>: This lets you set the group ID.  Again, if "
+"unsure, leave it blank."
 msgstr ""
 
 #. type: Content of: <section><info><title>
-#: en/ask_mntpoint_s.xml:3
+#: en/ask_mntpoint_s.xml:10
 msgid "Choose the mount points"
 msgstr "Zvolte si přípojné body"
 
@@ -411,16 +445,17 @@ msgstr "Zvolte si přípojné body"
 #.        write "it's type". And you're right about the redundant part, too, I removed it
 #.  And JohnR says the Americans are WRONG! :-)) 
 #.  2012-04-19  Language proofreading done 
+#. 2018/02/12 apb: Text and typography.
+#. 2019/01/04 apb: Typo & minor reword on custom mount-points.
 #. type: Content of: <section><mediaobject>
-#: en/ask_mntpoint_s.xml:27
+#: en/ask_mntpoint_s.xml:38
 #, fuzzy
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" xml:id="
-"\"chooseMountPoints-im1\" align=\"center\" fileref=\"dx2-chooseMountpoints."
-"png\" revision=\"1\"/> </imageobject> <imageobject condition=\"live\"> "
-"<imagedata format=\"PNG\" fileref=\"live-chooseMountpoints.png\" align="
-"\"center\" xml:id=\"live-chooseMountPoints-im1\" revision=\"1\"/> </"
-"imageobject>"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-chooseMountpoints.png\" format=\"PNG\" revision=\"1\" xml:id="
+"\"chooseMountPoints-im1\"/> </imageobject> <imageobject condition=\"live\"> "
+"<imagedata align=\"center\" fileref=\"live-chooseMountpoints.png\" format="
+"\"PNG\" revision=\"1\" xml:id=\"live-chooseMountPoints-im1\"/> </imageobject>"
 msgstr ""
 "<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
 "chooseMountpoints.png\" align=\"center\" format=\"PNG\" xml:id="
@@ -430,56 +465,37 @@ msgstr ""
 "im1\"></imagedata> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/ask_mntpoint_s.xml:36
+#: en/ask_mntpoint_s.xml:49
+#, fuzzy
 msgid ""
 "Here you see the Linux partitions that have been found on your computer. If "
-"you don't agree with the <application>DrakX</application> suggestions, you "
-"can change the mount points."
+"you don't agree with the DrakX suggestions, you can change the mount points "
+"yourself."
 msgstr ""
 "Zde vidíte Linuxové oddíly, které byly nalezeny na vašem počítači. Pokud "
 "nesouhlasíte s návrhem <application>DrakX</application>, můžete přípojné "
 "body změnit."
 
-#. type: Content of: <section><note><para>
-#: en/ask_mntpoint_s.xml:41
-#, fuzzy
-msgid ""
-"If you change anything, make sure you still have a <emphasis role=\"bold"
-"\"><literal>/</literal></emphasis> (root) partition."
-msgstr ""
-"Máte-li cokoliv ke změně, ujistěte se, že máte stále <literal>/</literal> "
-"kořenový oddíl (root)."
-
-#. type: Content of: <section><itemizedlist><listitem><para>
-#: en/ask_mntpoint_s.xml:46
-#, fuzzy
-msgid ""
-"Every partition is shown to the left as: <emphasis role=\"bold\">Device "
-"(capacity, mount point, type).</emphasis>"
-msgstr ""
-"Každý oddíl je zobrazen takto: \"Zařízení\" (\"Kapacita\", \"Přípojný bod\", "
-"\"Typ\")."
-
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/ask_mntpoint_s.xml:50
+#: en/ask_mntpoint_s.xml:55
 msgid ""
-"<emphasis role=\"bold\">Device</emphasis>, is made up of: <emphasis role="
-"\"bold\">hard drive</emphasis>, [<emphasis role=\"bold\">hard drive name</"
-"emphasis> (letter)], <emphasis role=\"bold\">partition number</emphasis> "
-"(for example, <emphasis role=\"bold\">sda5</emphasis>)."
+"To the left of the drop-down menus is a list of available partitions. For "
+"example: <filename>sda</filename> is a hard drive - and <filename>5</"
+"filename> is a <emphasis>partition number</emphasis>, followed by "
+"the<emphasis> (capacity, mount point, filesystem type)</emphasis> of the "
+"partition."
 msgstr ""
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/ask_mntpoint_s.xml:56
+#: en/ask_mntpoint_s.xml:63
 #, fuzzy
 msgid ""
-"If you have several partitions, you can choose various different mount "
-"points from the drop down menu, such as <emphasis role=\"bold\">/</"
-"emphasis>, <emphasis role=\"bold\"><literal>/home</literal></emphasis> and "
-"<emphasis role=\"bold\">/var</emphasis>. You can even make your own mount "
-"points, for instance <emphasis role=\"bold\"><literal>/video</literal></"
-"emphasis> for a partition where you want to store your films, or <emphasis "
-"role=\"bold\">/Data</emphasis> (or some other name) for your data."
+"If you have several partitions, you can choose various different "
+"<emphasis>mount points</emphasis> from the drop down menu, such as "
+"<filename>/</filename>, <filename>/home</filename> and <filename>/var</"
+"filename>. You can even make your own mount points, for instance <filename>/"
+"video</filename> for a partition where you want to store your films, or "
+"perhaps <filename>/Data</filename> for all your data files."
 msgstr ""
 "Pokud máte hodně oddílů, můžete si vybrat mnoho různých přípojných bodů z "
 "rozbalovací nabídky, jako jsou <literal>/</literal>, <literal>/home</"
@@ -489,7 +505,7 @@ msgstr ""
 "instalace kotle (cauldron)."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/ask_mntpoint_s.xml:63
+#: en/ask_mntpoint_s.xml:73
 #, fuzzy
 msgid ""
 "For any partitions that you don't need to make use of, you can leave the "
@@ -499,12 +515,22 @@ msgstr ""
 "bod."
 
 #. type: Content of: <section><warning><para>
-#: en/ask_mntpoint_s.xml:69
+#: en/ask_mntpoint_s.xml:79
+#, fuzzy
+msgid ""
+"If you make any changes here, ensure you still have a <filename>/</filename> "
+"(root) partition."
+msgstr ""
+"Máte-li cokoliv ke změně, ujistěte se, že máte stále <literal>/</literal> "
+"kořenový oddíl (root)."
+
+#. type: Content of: <section><tip><para>
+#: en/ask_mntpoint_s.xml:84
 #, fuzzy
 msgid ""
-"If you are not sure what to choose, click <emphasis role=\"bold\">Previous</"
-"emphasis> to go back and then tick <guilabel>Custom disk partitioning</"
-"guilabel>, where, you can click on a partition to see its type and size."
+"If you are not sure what to choose, click <emphasis>Previous</emphasis> to "
+"go back and then tick <emphasis>Custom disk partitioning</emphasis>, where "
+"you can click on a partition to see its type and size."
 msgstr ""
 "Vyberte <guibutton>Předchozí</guibutton>, pokud si nejste jisti tím, co si "
 "máte zvolit, a potom zaškrtněte <guilabel>Vlastní rozdělení disku</"
@@ -512,187 +538,237 @@ msgstr ""
 "viděli jeho typ a velikost."
 
 #. type: Content of: <section><para>
-#: en/ask_mntpoint_s.xml:74
+#: en/ask_mntpoint_s.xml:90
+#, fuzzy
 msgid ""
-"If you are sure the mount points are correct, click on <guibutton>Next</"
-"guibutton>, and choose whether you only want to format the partition(s) "
-"DrakX suggests, or more."
+"If you are sure the mount points are correct, click on <emphasis>Next</"
+"emphasis>, and choose whether you only want to format the partition "
+"suggested by DrakX, or more."
 msgstr ""
 "Pokud jste si jisti, že přípojné body jsou správně, klepněte na "
 "<guibutton>Další</guibutton> a vyberte si, zda chcete naformátovat jen ten "
 "oddíl (resp. oddíly), které DrakX navrhuje, anebo i další."
 
 #. type: Content of: <section><info><title>
-#: en/bestTime.xml:10
-msgid "Clock settings"
+#: en/bestTime.xml:5
+#, fuzzy
+msgid "Clock Settings"
 msgstr "Nastavení času"
 
 #. type: Content of: <section><mediaobject>
-#: en/bestTime.xml:14
+#: en/bestTime.xml:8
+#, fuzzy
 msgid ""
-"<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" "
-"format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>"
+"<imageobject> <imagedata format=\"PNG\" align=\"center\" fileref=\"live-"
+"bestTime.png\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>"
 msgstr ""
 "<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" "
 "format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/bestTime.xml:20
+#: en/bestTime.xml:12
+#, fuzzy
 msgid ""
-"In this step, you have to select on which time your internal clock is set, "
-"either local time or UTC time."
+"Here, you can select whether your computer internal clock is set to local "
+"time or UTC time."
 msgstr ""
 "V tomto kroku musíte vybrat, na který čas jsou vaše vnitřní hodiny nastaveny "
 "- buď na místní čas nebo na koordinovaný světový čas (UTC)."
 
 #. type: Content of: <section><para>
-#: en/bestTime.xml:23
-msgid "In advanced tab, you will find more options about clock settings."
-msgstr "Na kartě pokročilé najdete víc voleb pro nastavení času."
+#: en/bestTime.xml:14
+msgid ""
+"In the <emphasis>Advanced</emphasis> tab, you can enable automatic time "
+"synchronization and specify an NTP server."
+msgstr ""
 
 #. type: Content of: <section><info><title>
-#: en/bootLive.xml:1
+#: en/bootLive.xml:6
 msgid "Boot Mageia as Live system"
 msgstr "Zavést Mageiu jako živý systém"
 
 #. type: Content of: <section><section><info><title>
-#: en/bootLive.xml:1
+#: en/bootLive.xml:10
 msgid "Booting the medium"
 msgstr "Zavedení z datového nosiče"
 
-#. type: Content of: <section><section><section><info><title>
-#: en/bootLive.xml:1
-msgid "From a disc"
-msgstr "Z disku"
-
-#. type: Content of: <section><section><section><para>
-#: en/bootLive.xml:1
+#. type: Content of: <section><section><para>
+#: en/bootLive.xml:12
 msgid ""
-"You can boot directly from the media you used to burn your image (CD-ROM, "
-"DVD-ROM...). You usually just need to insert it in your CD/DVD drive for the "
-"bootloader to launch the installation automatically after rebooting the "
-"computer. If that does not happen you may need to reconfigure your BIOS or "
-"press one key that will offer you to choose the peripheral from which the "
-"computer will boot."
+"You can boot directly from a Live DVD or USB. Usually, you just need to plug "
+"the USB device in or place the DVD in the drive and restart the computer."
 msgstr ""
-"Systém můžete zavést z nosiče, na který jste vypálili svůj obrazový soubor "
-"(CD, DVD...). Obyčejně jej stačí jen vložit do vaší CD/DVD mechaniky, aby "
-"zavaděč spustil instalaci automaticky po restartu počítače. pokud se to "
-"nestane, možná potřebujete přenastavit BIOS anebo stisknout jednu klávesu, "
-"která vám nabídne vybrat si zařízení, ze kterého se počítač zavede."
 
-#. type: Content of: <section><section><section><para>
-#: en/bootLive.xml:6
+#. type: Content of: <section><section><para>
+#: en/bootLive.xml:15
 msgid ""
-"According to which hardware you have, and how it is configured, you get "
-"either one or another of the two screens below."
+"If the computer does not automatically boot from the USB or DVD you may need "
+"to reconfigure your BIOS Boot Disk priority. Alternatively, you might try "
+"accessing the boot device menu to select a device from which the computer "
+"will boot."
 msgstr ""
-"Podle toho, jaké máte vybavení počítače a jak je nastaveno, objeví se buď "
-"jedna anebo druhá ze dvou níže uvedených obrazovek."
 
-#. type: Content of: <section><section><section><info><title>
-#: en/bootLive.xml:7
-msgid "From a USB device"
-msgstr "Ze zařízení USB"
+#. type: Content of: <section><section><tip><para>
+#: en/bootLive.xml:20
+msgid ""
+"To access the BIOS or boot menu when the computer is starting, you can try "
+"pressing either <keycap>F2</keycap>, <keycap>Del</keycap> or <keycap>Esc</"
+"keycap> for the BIOS, or <keycap>Esc</keycap>, <keycap>F8</keycap>, "
+"<keycap>F10</keycap> or <keycap>F11</keycap> for the boot device menu. These "
+"(fairly common) keys are just a selection of possible options though."
+msgstr ""
 
-#. type: Content of: <section><section><section><para>
-#: en/bootLive.xml:7
+#. type: Content of: <section><section><note><para>
+#: en/bootLive.xml:28
 msgid ""
-"You can boot from the USB device on which you dumped your image ISO. "
-"According to your BIOS settings, the computer boots perhaps directly on the "
-"USB device already plugged in a port. If that does not happen you may need "
-"to reconfigure your BIOS or press one key that will offer you to choose the "
-"peripheral from which the computer will boot."
+"The actual screen that you will first see when booting from the Live media "
+"will depend on whether your computer motherboard is of the Legacy (BIOS) or "
+"UEFI type."
 msgstr ""
-"Počítač můžete spustit ze zařízení USB, na kterém je zaznamenán obraz ISO. "
-"Vzhledem k nastavení vašeho BIOSu se počítač možná už zavádí přímo ze "
-"zařízení USB zastrčeného v přípojném místě (portu) počítače. Pokud se tak "
-"neděje, možná potřebujete přenastavit BIOS anebo stisknout jednu klávesu, "
-"která vám nabídne výběr zařízení, z něhož se počítač spustí."
 
 #. type: Content of: <section><section><info><title>
-#: en/bootLive.xml:12
+#: en/bootLive.xml:35
 msgid "In BIOS/CSM/Legacy mode"
 msgstr "V zastaralém režimu BIOS/CSM"
 
+#. type: Content of: <section><section><itemizedlist><title>
+#: en/bootLive.xml:38
+msgid "Main Menu"
+msgstr ""
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:40 en/bootLive.xml:152
+#, fuzzy
+msgid "<emphasis role=\"bold\">Boot Mageia</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:41
+msgid ""
+"This option will boot the Mageia Live system from the connected DVD/USB "
+"media (expect a very slow system compared to an installed OS)."
+msgstr ""
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:42
+#, fuzzy
+msgid "Once the boot is done, you can proceed to the installation."
+msgstr ""
+"Nastavení nastavení, která jste tu udělali, jsou zachována pro instalaci."
+
+#. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/bootLive.xml:45 en/bootLive.xml:57
+#, fuzzy
+msgid ""
+"<emphasis role=\"bold\">+ use non-free video drivers (slower to boot)</"
+"emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/bootLive.xml:47
+msgid "Boot the Mageia Live system using non-free video drivers"
+msgstr ""
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:53 en/bootLive.xml:156 en/installer.xml:65
+#, fuzzy
+msgid "<emphasis role=\"bold\">Install Mageia</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:54 en/bootLive.xml:157
+#, fuzzy
+msgid "This option will install Mageia to a hard disk."
+msgstr ""
+"Nainstalovat Mageiu: Tato volba Mageiu přímo nainstaluje na pevný disk."
+
+#. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/bootLive.xml:59
+msgid "Install Mageia using non-free video drivers"
+msgstr ""
+
 #. type: Content of: <section><section><mediaobject>
-#: en/bootLive.xml:12
-msgid "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>"
+#: en/bootLive.xml:65
+#, fuzzy
+msgid ""
+"<imageobject> <imagedata fileref=\"live-bootCSM.png\" align=\"center\"/> </"
+"imageobject>"
 msgstr ""
-"<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>"
+"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
+"align=\"center\"/> </imageobject>"
 
 #. type: Content of: <section><section><mediaobject><caption><para>
-#: en/bootLive.xml:12
+#: en/bootLive.xml:69
 msgid "First screen while booting in BIOS mode"
 msgstr "První obrazovka během spouštění v režimu BIOS"
 
-#. type: Content of: <section><section><para>
-#: en/bootLive.xml:12
-msgid "In the middle menu, you have the choice between three actions:"
-msgstr "V prostřední nabídce máte volbu mezi třemi činnostmi:"
+#. type: Content of: <section><section><itemizedlist><title>
+#: en/bootLive.xml:73
+msgid "Function Keys"
+msgstr ""
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:13
-msgid ""
-"Boot Mageia: That means Mageia 5 will start from the connected media (CD/DVD "
-"or USB stick) without writing anything on the disk, so expect a very slow "
-"system. Once the boot is done, you can proceed to the installation on a hard "
-"disk."
-msgstr ""
-"Zavést Mageiu: Toto znamená, že Mageia 5 se spustí z připojeného nosiče (CD/"
-"DVD anebo zařízení USB) bez jakéhokoli zapisování na disk, takže očekávejte "
-"velmi pomalý systém. Jakmile se zavádění dokončí, můžete přikročit i k "
-"instalací na pevný disk."
+#: en/bootLive.xml:75
+#, fuzzy
+msgid "<keycap>F1</keycap> <emphasis role=\"bold\">Help</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:16
+#: en/bootLive.xml:76
 msgid ""
-"Install Mageia: This choice will directly install Mageia on a hard disk."
+"Within any of the <keycap>F2</keycap> to <keycap>F6</keycap> options, you "
+"can view relevant help by pressing <keycap>F1</keycap>."
 msgstr ""
-"Nainstalovat Mageiu: Tato volba Mageiu přímo nainstaluje na pevný disk."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:17
+#: en/bootLive.xml:81
+#, fuzzy
+msgid "<keycap>F2</keycap> <emphasis role=\"bold\">Language</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:82
 msgid ""
-"Boot from hard disk: This choice allows to boot from hard disk, as usual, "
-"when no media (CD/DVD or USB stick) is connected. (not working with Mageia "
-"5)."
+"Press <keycap>F2</keycap> to have the installer use a specific language "
+"during the installation. Use the arrow keys to select the language then "
+"press <keycap>Enter</keycap>."
 msgstr ""
-"Spustit z pevného disku: Tato volba dovoluje systém zavést z pevného disku, "
-"tak jako obyčejně, když není připojen žádný datový nosič (CD/DVD anebo "
-"zařízení USB). (nepracuje s Mageiou 5)."
 
-#. type: Content of: <section><section><para>
-#: en/bootLive.xml:19
-msgid "In the bottom menu, are the Boot Options:"
-msgstr "Ve spodní nabídce jsou Volby zavedení systému:"
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:87
+#, fuzzy
+msgid "<keycap>F3</keycap> <emphasis role=\"bold\">Video Mode</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:19
+#: en/bootLive.xml:89
+#, fuzzy
 msgid ""
-"F1 - Help. Explain the options \"splash\", \"apm\", \"acpi\" and \"Ide\""
+"If needed, change the screen resolution by pressing <keycap>F3</keycap>. "
+"Options are: 640x480, 800x600, 1024x768."
 msgstr ""
-"F1 - Nápověda. Vysvětluje volby \"splash\", \"apm\", \"acpi\" a \"Ide\""
+"Změňte rozlišení obrazovky stisknutím klávesy F3 (jen v zastaralém režimu)."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:20
-msgid "F2 - Language. Choose the display language of the screens."
-msgstr "F2 - Jazyk. Vyberte si pro zobrazení jazyka obrazovek."
+#: en/bootLive.xml:93
+#, fuzzy
+msgid "<keycap>F4</keycap> <emphasis role=\"bold\">Source</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:21
-msgid "F3 - Screen resolution. Choose between text, 640x400, 800x600, 1024x728"
+#: en/bootLive.xml:94
+msgid ""
+"Normally, the installation is performed from the inserted installation "
+"medium. Here, you may select other sources, like FTP or NFS servers."
 msgstr ""
-"F3 - Rozlišení obrazovky. Volba mezi textem, 640x400, 800x600, 1024x728"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:22
+#: en/bootLive.xml:95
+#, fuzzy
 msgid ""
-"F4 - CD-Rom. CD-Rom or Other. Normally, the installation is performed from "
-"the inserted installation medium. Here, select other sources, like FTP or "
-"NFS servers. If the installation is carried out in a network with an SLP "
-"server, select one of the installation sources available on the server with "
-"this option."
+"If the installation is carried out in a network with an SLP server, then "
+"select one of the installation sources available on the server with this "
+"option."
 msgstr ""
 "F4 - CD-Rom. CD-Rom anebo Další. Normálně se instalace vykoná z vloženého "
 "instalačního média. Zde si vybíráte jiné zdroje, jakými jsou FTP anebo "
@@ -700,122 +776,172 @@ msgstr ""
 "volbě si vyberte jeden z instalačních zdrojů dostupných na serveru."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:26
+#: en/bootLive.xml:98
+#, fuzzy
+msgid "<keycap>F5</keycap> <emphasis role=\"bold\">Driver</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:99
 msgid ""
-"F5 - Driver. Yes or No. The system is aware about the presence of an "
-"optional disk with a driver update and will require its insertion during "
-"installation process."
+"If you have a driver update that you wish to use, select this option and "
+"then answer <emphasis>Yes</emphasis>. You will be prompted to insert the "
+"update disc at the appropriate time."
 msgstr ""
-"F5 - Ovladač. Ano nebo Ne. Systém si je vědom přítomnosti volitelného disku "
-"s aktualizací ovladače a bude požadovat jeho vložení během procesu instalace."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/bootLive.xml:28
+#: en/bootLive.xml:104
+#, fuzzy
+msgid "<keycap>F6</keycap> <emphasis role=\"bold\">Kernel Options</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:106
+msgid ""
+"If you experience problems with the installation, you could try modifying "
+"the default settings using the <emphasis>Kernel Option</emphasis> menu:"
+msgstr ""
+
+#. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/bootLive.xml:111
+#, fuzzy
+msgid ""
+"<emphasis role=\"bold\">Default:</emphasis> splash quiet noiswmd resume "
+"audit=0"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/bootLive.xml:114
 msgid ""
-"F6 - Kernel options. This is a way to specify options according to your "
-"hardware and the drivers to use."
+"<emphasis role=\"bold\">Safe Settings:</emphasis> <literal>apm=off acpi=off "
+"mce=off barrier=off ide=nodma idewait=50 i8042.nomux psmouse.proto=bare "
+"irqpoll pci=nommconf</literal>"
+msgstr ""
+
+#. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/bootLive.xml:120
+#, fuzzy
+msgid ""
+"<emphasis role=\"bold\">No ACPI:</emphasis> (Advanced Configuration and "
+"Power Interface): Power management features are not used."
+msgstr ""
+"- Žádné ACPI (pokročilé rozhraní nastavení a napájení), správa napájení není "
+"brána do úvahy."
+
+#. type: Content of: <section><section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/bootLive.xml:125
+#, fuzzy
+msgid ""
+"<emphasis role=\"bold\">No Local APIC:</emphasis> (Local Advanced "
+"Programmable Interrupt Controller): CPU interrupt. Select this option if you "
+"experience system misbehaviour like a kernel panic in relation to APIC."
+msgstr ""
+"- Žádný místní APIC (lokální pokročilý programovatelný ovladač přerušení), "
+"jedná se o přerušení CPU, vyberte tuto volbu, pokud jste k tomu vyzváni."
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:131
+msgid ""
+"If you open any of the above <keycap>F6</keycap> menu items, and then click "
+"on <keycap>F1</keycap>, an info window will open to show more details for "
+"that particular item:"
 msgstr ""
-"F6 - Volby jádra. Toto je cesta pro zadání voleb vztahujících se k vybavení "
-"počítače a ovladačům, které se použijí."
 
 #. type: Content of: <section><section><info><title>
-#: en/bootLive.xml:29
+#: en/bootLive.xml:139
 msgid "In UEFI mode"
 msgstr "V režimu UEFI"
 
 #. type: Content of: <section><section><mediaobject>
-#: en/bootLive.xml:29
+#: en/bootLive.xml:142
+#, fuzzy
 msgid ""
-"<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" "
-"align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>"
+"<imageobject> <imagedata format=\"PNG\" fileref=\"live-bootUEFI.png\" align="
+"\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/> </imageobject>"
 msgstr ""
 "<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" "
 "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>"
 
 #. type: Content of: <section><section><mediaobject><caption><para>
-#: en/bootLive.xml:29
-msgid "First screen while booting on UEFI system from disk"
-msgstr "První obrazovka během spuštění z disku na systémech UEFI"
+#: en/bootLive.xml:146
+#, fuzzy
+msgid "First screen while booting in UEFI mode"
+msgstr "První obrazovka během spouštění v režimu BIOS"
 
 #. type: Content of: <section><section><para>
-#: en/bootLive.xml:29
-msgid ""
-"You have only the choice to run Mageia in Live mode (first choice)  or to "
-"process the installation (second choice)."
+#: en/bootLive.xml:149
+msgid "In UEFI mode, you have just the two menu options to choose from:"
 msgstr ""
-"Zde máte jen možnost spustit Mageiu v Živém režimu (první volba) nebo "
-"spustit instalaci (druhá volba)."
 
-#. type: Content of: <section><section><para>
-#: en/bootLive.xml:30
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/bootLive.xml:153
+#, fuzzy
 msgid ""
-"If you booted from a USB stick, you get two supplemental lines which are a "
-"duplicata of the previous lines suffixed with \"USB\". You have to choose "
-"them."
+"This option will boot the Mageia Live system from the connected Dvd/USB "
+"media (expect a very slow system compared to an installed OS). Once the boot "
+"is done, you can proceed to the installation"
 msgstr ""
-"Pokud jste počítač spustili ze zařízení USB, dostanete dva doplňující řádky, "
-"které jsou duplikáty předchozích řádků zakončených zkratkou \"USB\". Máte je "
-"vybrat."
+"Zavést Mageiu: Toto znamená, že Mageia 5 se spustí z připojeného nosiče (CD/"
+"DVD anebo zařízení USB) bez jakéhokoli zapisování na disk, takže očekávejte "
+"velmi pomalý systém. Jakmile se zavádění dokončí, můžete přikročit i k "
+"instalací na pevný disk."
 
-#. type: Content of: <section><section><para>
-#: en/bootLive.xml:32
+#. type: Content of: <section><section><note><para>
+#: en/bootLive.xml:161
 msgid ""
-"In each case, the first steps will be the same to choose language, timezone "
-"and keyboard, then the processes differ, with <link linkend=\"testing"
-"\">additional steps in Live mode</link>."
+"If you booted from a USB stick, you will see the above menu options "
+"duplicated, and in this case, you should choose from the menu pair that will "
+"be suffixed with \"USB\"."
 msgstr ""
-"V každém případě budou první kroky stejné - vybrat si jazyk, časovou zónu a "
-"klávesnici; potom se postupy odlišují v <link linkend=\"testing"
-"\">dodatečných krocích v Živém režimu</link>."
 
 #. type: Content of: <section><info><title>
-#: en/chooseDesktop.xml:3
+#: en/chooseDesktop.xml:16
 msgid "Desktop Selection"
 msgstr "Výběr pracovního prostředí"
 
 #. type: Content of: <section><para>
-#: en/chooseDesktop.xml:8
-#, fuzzy
-msgid ""
-"Depending on your selection here, you may be offered further screens to fine-"
-"tune your choice."
+#: en/chooseDesktop.xml:23
+msgid "Some choices made here will open other screens with related options."
 msgstr ""
-"V závislosti na vašem výběru zde, vám můžou být nabídnuty další obrazovky "
-"pro jemné doladění vaší volby."
 
 #. type: Content of: <section><para>
-#: en/chooseDesktop.xml:11
+#: en/chooseDesktop.xml:26
 #, fuzzy
 msgid ""
-"After the selection step(s), you will see a slide-show during package "
-"installation. The slide show can be disabled by pressing the "
-"<guilabel>Details</guilabel> button"
+"After the selection step(s), you will see a slideshow during the "
+"installation of required packages. The slideshow can be disabled by pressing "
+"the <emphasis>Details</emphasis> button."
 msgstr ""
 "Po kroku (resp. krocích) výběru uvidíte během instalace balíčků pohyblivou "
 "přehlídku snímků. Přehlídka může být vypnuta stisknutím tlačítka "
 "<guilabel>Podrobnosti</guilabel>."
 
 #. type: Content of: <section><mediaobject>
-#: en/chooseDesktop.xml:16
+#: en/chooseDesktop.xml:31
+#, fuzzy
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
-"align=\"center\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-chooseDesktop.png\" "
+"format=\"PNG\"/> </imageobject>"
 msgstr ""
 "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
 "align=\"center\"/> </imageobject>"
 
-#. type: Content of: <section><para>
-#: en/chooseDesktop.xml:21
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/chooseDesktop.xml:38
+msgid ""
+"Choose whether you prefer to use the KDE Plasma or GNOME desktop "
+"environment. Both come with a full set of useful applications and tools."
+msgstr ""
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/chooseDesktop.xml:44
 #, fuzzy
 msgid ""
-"Choose whether you prefer to use the <application>KDE</application> "
-"<emphasis role=\"bold\">Plasma</emphasis> or <application>GNOME</"
-"application> desktop environment. Both come with a full set of useful "
-"applications and tools. Tick <guilabel>Custom</guilabel> if you wish to use "
-"neither (or even use both), or if you want to modify the default software "
-"choices for these desktop environments. The <application>LXDE</application> "
-"desktop, for instance, is lighter than the previous two, sporting less eye "
-"candy and fewer packages installed by default."
+"Select <emphasis>Custom</emphasis> if you do not wish to use either (or, "
+"actually use both) of these, or if you want to modify the default software "
+"choices for these desktop environments. The LXDE desktop, for instance, is "
+"lighter than the previous two, sporting less eye candy and having fewer "
+"packages installed by default."
 msgstr ""
 "Rozhodněte se, zda chcete používat prostředí <application>KDE</application> "
 "nebo <application>Gnome</application>. Obě prostředí jsou vybavená všemi "
@@ -831,8 +957,9 @@ msgid "Package Group Selection"
 msgstr "Výběr skupiny balíčků"
 
 #. Lebarhon 20170209 Updated SC
+#. 2018/02/25 apb: add xreflabel to this section.
 #. type: Content of: <section><mediaobject>
-#: en/choosePackageGroups.xml:9
+#: en/choosePackageGroups.xml:11
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackageGroups.png"
 "\" align=\"center\"/> </imageobject>"
@@ -841,7 +968,7 @@ msgstr ""
 "\" align=\"center\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/choosePackageGroups.xml:14
+#: en/choosePackageGroups.xml:16
 #, fuzzy
 msgid ""
 "Packages are arranged into common groups, to make choosing what you need on "
@@ -855,25 +982,25 @@ msgstr ""
 "myší na název skupiny."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/choosePackageGroups.xml:21
+#: en/choosePackageGroups.xml:23
 #, fuzzy
 msgid "<emphasis role=\"bold\">Workstation</emphasis>"
 msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/choosePackageGroups.xml:25
+#: en/choosePackageGroups.xml:27
 #, fuzzy
 msgid "<emphasis role=\"bold\">Server</emphasis>"
 msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/choosePackageGroups.xml:29
+#: en/choosePackageGroups.xml:31
 #, fuzzy
 msgid "<emphasis role=\"bold\">Graphical Environment</emphasis>"
 msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/choosePackageGroups.xml:33
+#: en/choosePackageGroups.xml:35
 #, fuzzy
 msgid ""
 "<emphasis role=\"bold\">Individual Package Selection</emphasis>: you can use "
@@ -883,7 +1010,7 @@ msgstr ""
 "nebo odebrání balíčků."
 
 #. type: Content of: <section><para>
-#: en/choosePackageGroups.xml:38
+#: en/choosePackageGroups.xml:40
 #, fuzzy
 msgid ""
 "See <xref linkend=\"minimal-install\"/> for instructions on how to do a "
@@ -898,8 +1025,10 @@ msgid "Choose Individual Packages"
 msgstr "Výběr jednotlivých balíčků"
 
 #. 2012-12-26 marja - exported this section from choosePackages.xml to start a new page
+#. 2018/02/15 apb: Text and typography.
+#. 2018/02/25 apb: add xreflabel to this section.
 #. type: Content of: <section><mediaobject>
-#: en/choosePackagesTree.xml:9
+#: en/choosePackagesTree.xml:13
 #, fuzzy
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-choosePackagesTree.png"
@@ -909,7 +1038,7 @@ msgstr ""
 "\" align=\"center\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/choosePackagesTree.xml:14
+#: en/choosePackagesTree.xml:18
 #, fuzzy
 msgid ""
 "Here you can add or remove any extra packages to customize your installation."
@@ -918,13 +1047,14 @@ msgstr ""
 "instalace."
 
 #. type: Content of: <section><para>
-#: en/choosePackagesTree.xml:17
+#: en/choosePackagesTree.xml:21
+#, fuzzy
 msgid ""
-"After having made your choice, you can click on the <guibutton>floppy icon</"
-"guibutton> at the bottom of the page to save your choice of packages (saving "
-"to a USB key works, too). You can then use this file to install the same "
-"packages on another system, by pressing the same button during install and "
-"choosing to load it."
+"After having made your choice, you can click on the <emphasis>floppy</"
+"emphasis> icon at the bottom of the page to save your choice of packages "
+"(saving to a USB key works, too). You can then use this file to install the "
+"same packages on another system, by pressing the same button during install "
+"and choosing to load it."
 msgstr ""
 "Po učinění výběru můžete klepnout na <guibutton>ikonu diskety</guibutton> ve "
 "spodní části stránky pro uložení vašeho výběru balíčků (funguje i uložení na "
@@ -939,8 +1069,10 @@ msgstr "Nastavení služeb"
 
 #.  2012-12-25 marja - moved this section out of misc-params.xml 
 #.  2013-05-05 marja - added screenshot 
+#.  2018/02/16 apb: Minor text adjustment.
+#. 2018/02/25 apb: a) add xreflabel for this section. b) Added some bullets to the text.
 #. type: Content of: <section><mediaobject>
-#: en/configureServices.xml:11
+#: en/configureServices.xml:15
 #, fuzzy
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-configureServices.png"
@@ -951,25 +1083,21 @@ msgstr ""
 "id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/configureServices.xml:16
+#: en/configureServices.xml:20
 #, fuzzy
 msgid ""
 "Here you can choose which services should start when you boot your system."
 msgstr "Zde si můžete nastavit, jaké služby (ne)spouštět při zavádění systému."
 
-#. type: Content of: <section><para>
-#: en/configureServices.xml:19
-msgid "Click on a triangle to expand a group to all the relevant services."
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureServices.xml:25
+msgid ""
+"Click on a triangle to expand a group to all the relevant services. The "
+"settings DrakX chose are usually good."
 msgstr ""
 
-#. type: Content of: <section><para>
-#: en/configureServices.xml:22
-#, fuzzy
-msgid "The settings DrakX chose are usually good."
-msgstr "Nastavení, která DrakX vybral, jsou obyčejně dobrá."
-
-#. type: Content of: <section><para>
-#: en/configureServices.xml:25
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureServices.xml:31
 msgid ""
 "If you highlight a service, some information about it is shown in the info "
 "box below."
@@ -978,7 +1106,7 @@ msgstr ""
 "níže."
 
 #. type: Content of: <section><para>
-#: en/configureServices.xml:28
+#: en/configureServices.xml:37
 msgid "Only change things when you know very well what you are doing."
 msgstr "Věci měňte jen tehdy, když velmi dobře víte, co děláte."
 
@@ -989,15 +1117,17 @@ msgstr "Nastavení časového pásma"
 
 #.  2012-12-25 marja - moved this part out of misc-params.xml 
 #.  2013-05-05 marja - added screenshot 
+#. 2018/02/13 apb: Minor text adjustment.
+#. 2018/02/25 apb: Added xreflabel to this section.
 #. type: Content of: <section><mediaobject>
-#: en/configureTimezoneUTC.xml:11
+#: en/configureTimezoneUTC.xml:15
 #, fuzzy
 msgid ""
 "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" xml:id="
 "\"configureTimezoneUTC-im1\" align=\"center\" fileref=\"dx2-"
-"configureTimezoneUTC.png\" revision=\"1\"/> </imageobject> <imageobject> "
-"<imagedata format=\"PNG\" fileref=\"live-timeZone.png\" condition=\"live\"/> "
-"</imageobject>"
+"configureTimezoneUTC.png\" revision=\"1\"/> </imageobject> <imageobject "
+"condition=\"live\"> <imagedata format=\"png\" fileref=\"live-timeZone.png\" "
+"align=\"center\"/> </imageobject>"
 msgstr ""
 "<imageobject condition=\"classical\"> <imagedata xml:id="
 "\"configureTimezoneUTC-im1\" revision=\"1\" fileref=\"dx2-"
@@ -1005,18 +1135,18 @@ msgstr ""
 "<imageobject> <imagedata fileref=\"live-timeZone.png\" condition=\"live\" "
 "format=\"PNG\"/> </imageobject>"
 
-#. type: Content of: <section><para>
-#: en/configureTimezoneUTC.xml:20
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureTimezoneUTC.xml:26
 #, fuzzy
 msgid ""
-"Choose your time-zone by choosing your country or a city close to you in the "
-"same time-zone."
+"Choose your timezone by choosing your country, or a city close to you in the "
+"same timezone."
 msgstr ""
 "Vyberte si časové pásmo výběrem vaší zememě nebo nejbližší město ve stejném "
 "časovém pásmu."
 
 #. type: Content of: <section><para>
-#: en/configureTimezoneUTC.xml:24
+#: en/configureTimezoneUTC.xml:32
 #, fuzzy
 msgid ""
 "In the next screen you can choose to set your hardware clock to local time "
@@ -1026,7 +1156,7 @@ msgstr ""
 "GMT, také známý jako UTC."
 
 #. type: Content of: <section><note><para>
-#: en/configureTimezoneUTC.xml:29
+#: en/configureTimezoneUTC.xml:37
 msgid ""
 "If you have more than one operating system on your computer, make sure they "
 "are all set to local time, or all to UTC/GMT."
@@ -1035,23 +1165,24 @@ msgstr ""
 "jsou všechny nastaveny na místní čas, nebo všichny na UTC/GMT."
 
 #. type: Content of: <section><info><title>
-#: en/configureX_card_list.xml:13
+#: en/configureX_card_list.xml:24
 msgid "Choose an X Server (Configure your Graphic Card)"
 msgstr "Výběr X Serveru (Konfigurace vaší grafické karty)"
 
 #. type: Content of: <section><mediaobject>
-#: en/configureX_card_list.xml:18
+#: en/configureX_card_list.xml:29
 #, fuzzy
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_card_list-im1\" "
-"align=\"center\" fileref=\"dx2-configureX_card_list.png\" revision=\"1\"/> </"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_card_list."
+"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_card_list-im1\"/> </"
 "imageobject>"
 msgstr ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align="
-"\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
+"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
+"imageobject>"
 
 #. type: Content of: <section><para>
-#: en/configureX_card_list.xml:23
+#: en/configureX_card_list.xml:35
 msgid ""
 "DrakX has a very comprehensive database of video cards and will usually "
 "correctly identify your video device."
@@ -1060,7 +1191,7 @@ msgstr ""
 "identifikuje správně."
 
 #. type: Content of: <section><para>
-#: en/configureX_card_list.xml:26
+#: en/configureX_card_list.xml:38
 msgid ""
 "If the installer has not correctly detected your graphic card and you know "
 "which one you have, you can select it from the tree by:"
@@ -1068,98 +1199,96 @@ msgstr ""
 "Pokud není vaše grafická karta rozpoznána instalačním programem správně a "
 "víte, jakou kartu máte, můžete ji vybrat ze stromu:"
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/configureX_card_list.xml:29 en/configureX_monitor.xml:57
-msgid "vendor"
+#. type: Content of: <section><variablelist><varlistentry><term>
+#: en/configureX_card_list.xml:41 en/configureX_monitor.xml:74
+#, fuzzy
+msgid "Vendor"
 msgstr "dodavatel"
 
 #. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/configureX_card_list.xml:33
-msgid "then the name of your card"
+#: en/configureX_card_list.xml:45
+#, fuzzy
+msgid "then the make of your card"
 msgstr "pak název vaší karty"
 
 #. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/configureX_card_list.xml:37
-msgid "and the type of card"
+#: en/configureX_card_list.xml:49
+#, fuzzy
+msgid "and the model of card"
 msgstr "a typ vaší karty"
 
 #. type: Content of: <section><para>
-#: en/configureX_card_list.xml:41
+#: en/configureX_card_list.xml:53
 #, fuzzy
 msgid ""
 "If you cannot find your card in the vendor lists (because it's not yet in "
 "the database or it's an older card) you may find a suitable driver in the "
-"<emphasis role=\"bold\">Xorg</emphasis> category, which provides more than "
-"40 generic and open source video card drivers. If you still can't find a "
-"specific driver for your card there is the option of using the <emphasis "
-"role=\"bold\">vesa</emphasis> driver which provides basic capabilities."
+"<emphasis>Xorg</emphasis> category, which provides more than 40 generic and "
+"open source video card drivers. If you still can't find a specific driver "
+"for your card there is the option of using the VESA driver which provides "
+"basic capabilities."
 msgstr ""
 "Seznam Xorg poskytuje více než 40 obecných a open source ovladačů grafických "
 "karet. Pokud stále nemůžete najít název ovladače pro kartu, existuje možnost "
 "použití VESA ovladač, který poskytuje základní možnosti."
 
-#. type: Content of: <section><para>
-#: en/configureX_card_list.xml:47
+#. type: Content of: <section><caution><para>
+#: en/configureX_card_list.xml:61
 #, fuzzy
 msgid ""
 "Be aware that if you select an incompatible driver you may only have access "
-"to the <emphasis role=\"bold\">Command-line</emphasis> Interface."
+"to the <emphasis>Command Line Interface</emphasis>"
 msgstr ""
 "Uvědomte si, že pokud vyberete nekompatibilní ovladač, můžete mít přístup "
 "pouze k rozhhraní příkazové řádky."
 
 #. type: Content of: <section><para>
-#: en/configureX_card_list.xml:51
+#: en/configureX_card_list.xml:65
 #, fuzzy
 msgid ""
 "Some video card manufacturers provide proprietary drivers for Linux which "
-"may only be available in the <emphasis role=\"bold\">Nonfree</emphasis> "
-"repository and in some cases only from the card manufacturers' websites."
+"may only be available in the <emphasis>Nonfree</emphasis> repository and in "
+"some cases only from the card manufacturers' websites. The "
+"<emphasis>Nonfree</emphasis> repository needs to be explicitly enabled to "
+"access them. If you didn't enable it previously, you should do this after "
+"your first reboot."
 msgstr ""
 "Někteří výrobci grafických karet poskytují proprietární ovladače pro Linux, "
 "které mohou být k dispozici v nonfree úložišti a v některých případech jen "
 "pouze z webových stránek výrobce karety."
 
-#. type: Content of: <section><para>
-#: en/configureX_card_list.xml:56
-#, fuzzy
-msgid ""
-"The <emphasis role=\"bold\">Nonfree</emphasis> repository needs to be "
-"explicitly enabled to access them. If you didn't enable it previously, you "
-"should do this after your first reboot."
-msgstr ""
-"Přístup k Nonfree úložišti musí být výslovně povolen. Pokud tomu tak není, "
-"nejdříve jej povolte, toto byste měli udělat po prvním restartu."
-
 #. type: Content of: <section><info><title>
-#: en/configureX_chooser.xml:3
+#: en/configureX_chooser.xml:11
 msgid "Graphic Card and Monitor Configuration"
 msgstr "Nastavení grafické karty a monitoru"
 
 #.  Marja 2012-08-10, copied setupX.xml to this file and replaced all "setupX" in the code by "configureX_chooser", because this is the correct filename for this page
+#. 2018/02/15 apb: Some text and typography.
+#. 2018/02/21 apb: a) Changed main options list style. b) Slight reword of 'wrong refresh rates' warning.
+#. 2018/02/23 apb: Typo.
 #. type: Content of: <section><mediaobject>
-#: en/configureX_chooser.xml:10
+#: en/configureX_chooser.xml:24
 #, fuzzy
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_chooser-im1\" "
-"fileref=\"dx2-configureX_chooser.png\" align=\"center\" revision=\"1\"/> </"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_chooser."
+"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_chooser-im1\"/> </"
 "imageobject>"
 msgstr ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-"
-"reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
+"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
+"imageobject>"
 
 #. type: Content of: <section><para>
-#: en/configureX_chooser.xml:15
+#: en/configureX_chooser.xml:30
 #, fuzzy
 msgid ""
 "No matter which graphical environment (also known as desktop environment) "
-"you chose for this install of <application>Mageia</application>, they are "
-"all based on a graphical user interface system called <acronym>X Window "
-"System</acronym>, or simply <acronym>X</acronym>. So in order for "
-"<acronym>KDE</acronym> Plasma, <acronym>GNOME</acronym>, <acronym>LXDE</"
-"acronym> or any other graphical environment to work well, the following "
-"<acronym>X</acronym> settings need to be correct. Choose the correct "
-"settings if none are shown, or if you think the details are incorrect."
+"you chose for this install of Mageia, they are all based on a graphical user "
+"interface system called <literal>X Window System</literal>, or simply "
+"<quote>X</quote>. So in order for KDE Plasma, GNOME, LXDE or any other "
+"graphical environment to work well, the following <quote>X</quote> settings "
+"need to be correct. Choose the appropriate settings - if none are shown, or "
+"if you think the details are incorrect."
 msgstr ""
 "Bez ohledu na to, které grafické prostředí (známé i jako prostředí pracovní "
 "plochy) jste si vybrali pro tuto instalaci <application>Mageii</"
@@ -1173,23 +1302,33 @@ msgstr ""
 "myslíte, že volba je nesprávná."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/configureX_chooser.xml:27
+#: en/configureX_chooser.xml:41
+#, fuzzy
+msgid "<emphasis role=\"bold\">Graphic Card</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureX_chooser.xml:44
 msgid ""
-"<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your card "
-"from the list if needed."
+"If you need to, you can select a specific card from this expandable list. "
+"See <xref linkend=\"configureX_card_list\"/>."
 msgstr ""
-"<emphasis><guibutton>Grafická karta</guibutton></emphasis>: Vyberte ze "
-"seznamu vaši kartu, pokud je to třeba."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/configureX_chooser.xml:33
+#: en/configureX_chooser.xml:49
+#, fuzzy
+msgid "<emphasis role=\"bold\">Monitor</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureX_chooser.xml:52
 #, fuzzy
 msgid ""
-"<emphasis><guibutton>Monitor</guibutton></emphasis>: You can choose "
-"<guilabel>Plug'n Play</guilabel> if applicable, or choose your monitor from "
-"the <guilabel>Vendor</guilabel> or <guilabel>Generic</guilabel> list. Choose "
-"<guilabel>Custom</guilabel> if you prefer to manually set the horizontal and "
-"vertical refresh rates of your monitor."
+"You can choose Plug'n Play, if applicable, or choose your monitor from the "
+"<emphasis>Vendor</emphasis> or <emphasis>Generic</emphasis> list. Choose "
+"<emphasis>Custom</emphasis> if you prefer to manually set the horizontal and "
+"vertical refresh rates of your monitor. See <xref linkend="
+"\"configureX_monitor\"/>."
 msgstr ""
 "<emphasis><guibutton>Monitor</guibutton></emphasis>: Máte na výběr možnost "
 "<guilabel>Plug'n Play</guilabel>, pokud je použitelná, nebo si vybrat "
@@ -1198,32 +1337,37 @@ msgstr ""
 "upřednostňujete ruční nastavení vodorovné a svislé obnovovací frekvence "
 "vašeho monitoru."
 
-#. type: Content of: <section><itemizedlist><listitem><warning><para>
-#: en/configureX_chooser.xml:41
-msgid "Incorrect refresh rates may damage your monitor"
-msgstr "Nesprávná obnovovací frekvence může poškodit váš monitor"
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureX_chooser.xml:60
+#, fuzzy
+msgid "<emphasis role=\"bold\">Resolution</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/configureX_chooser.xml:47
+#: en/configureX_chooser.xml:63
 #, fuzzy
-msgid ""
-"<emphasis><guibutton>Resolution</guibutton></emphasis>: The resolution and "
-"color depth of your monitor can be set here."
+msgid "The resolution and color depth of your monitor can be set here"
 msgstr ""
 "<emphasis><guibutton>Rozlišení</guibutton></emphasis>: Zde nastavte "
 "požadované rozlišení a barevnou hloubku monitoru."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/configureX_chooser.xml:52
+#: en/configureX_chooser.xml:68
+#, fuzzy
+msgid "<emphasis role=\"bold\">Test</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureX_chooser.xml:71
 #, fuzzy
 msgid ""
-"<emphasis><guibutton>Test</guibutton></emphasis>: The test button does not "
-"always appear during install. If the option is there, and you test your "
-"settings, you should be ask whether your settings are correct. If you answer "
-"<emphasis role=\"bold\">yes</emphasis>, the settings will be kept. If you "
-"don't see anything, you'll return to the configuration screen and be able to "
-"reconfigure everything until the test result is satisfactory. If the test "
-"option is not available, then make sure your settings are on the safe side."
+"The test button does not always appear during install. If the option is "
+"there, and you test your settings, you should be asked whether your settings "
+"are correct. If you answer <emphasis>Yes</emphasis>, the settings will be "
+"kept. If you don't see anything, you'll return to the configuration screen "
+"and be able to reconfigure everything until the test result is satisfactory. "
+"If the test option is not available, then make sure your settings are on the "
+"safe side."
 msgstr ""
 "<emphasis><guibutton>Zkouška</guibutton></emphasis>: Ne vždy se během  "
 "instalace objeví testovací tlačítko. Pokud je tu toto tlačítko, můžete "
@@ -1235,21 +1379,35 @@ msgstr ""
 "testovací tlačítko dostupné.</emphasis>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/configureX_chooser.xml:63
-msgid ""
-"<emphasis><guibutton>Options</guibutton></emphasis>: Here you can choose to "
-"enable or disable various options."
+#: en/configureX_chooser.xml:81
+#, fuzzy
+msgid "<emphasis role=\"bold\">Options</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureX_chooser.xml:84
+#, fuzzy
+msgid "Here you can choose to enable or disable various options"
 msgstr ""
 "<emphasis><guibutton>Možnosti</guibutton></emphasis>: Zde si můžete vybrat "
 "zda povolit nebo zakázat různé další možnosti."
 
+#. type: Content of: <section><warning><para>
+#: en/configureX_chooser.xml:89
+msgid ""
+"There is a risk of damaging a monitor if you choose refresh rates that are "
+"outside the frequency range of that monitor. This applies to older CRT "
+"displays: modern monitors will reject an unsupported frequency and normally "
+"enter standby mode."
+msgstr ""
+
 #. type: Content of: <section><info><title>
-#: en/configureX_monitor.xml:11
+#: en/configureX_monitor.xml:22
 msgid "Choosing your Monitor"
 msgstr "Výběr monitoru"
 
 #. type: Content of: <section><para>
-#: en/configureX_monitor.xml:14
+#: en/configureX_monitor.xml:25
 msgid ""
 "DrakX has a very comprehensive database of monitors and will usually "
 "correctly identify yours."
@@ -1258,7 +1416,7 @@ msgstr ""
 "váš."
 
 #. type: Content of: <section><warning><para>
-#: en/configureX_monitor.xml:19
+#: en/configureX_monitor.xml:30
 #, fuzzy
 msgid ""
 "<emphasis role=\"bold\">Selecting a monitor with different characteristics "
@@ -1272,25 +1430,26 @@ msgstr ""
 "do dokumentace k vašemu monitoru."
 
 #. type: Content of: <section><mediaobject>
-#: en/configureX_monitor.xml:26
-#, fuzzy
+#: en/configureX_monitor.xml:38
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_monitor-im1\" "
-"fileref=\"dx2-configureX_monitor.png\" align=\"center\" revision=\"1\"/> </"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
+"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
 "imageobject>"
 msgstr ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-"
-"reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-configureX_monitor."
+"png\" format=\"PNG\" revision=\"1\" xml:id=\"configureX_monitor-im1\"/> </"
+"imageobject>"
 
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:31
-msgid "<emphasis>Custom</emphasis>"
-msgstr "<emphasis>Vlastní</emphasis>"
+#. type: Content of: <section><variablelist><varlistentry><term>
+#: en/configureX_monitor.xml:46
+msgid "Custom"
+msgstr ""
 
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:33
+#. type: Content of: <section><variablelist><varlistentry><listitem><para>
+#: en/configureX_monitor.xml:49
+#, fuzzy
 msgid ""
-"This option allows you to set two critical parameters, the vertical refresh "
+"This option allows you to set two critical parameters: the vertical refresh "
 "rate and the horizontal sync rate. Vertical refresh determines how often the "
 "screen is refreshed and horizontal sync is the rate at which scan lines are "
 "displayed."
@@ -1300,8 +1459,8 @@ msgstr ""
 "určuje, jak často je obrazovka obnovována a horizontální synchronizace je "
 "rychlost, kterou jsou zobrazovány skenované řádky."
 
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:38
+#. type: Content of: <section><variablelist><varlistentry><listitem><para>
+#: en/configureX_monitor.xml:55
 msgid ""
 "It is <emphasis>VERY IMPORTANT</emphasis> that you do not specify a monitor "
 "type with a sync range that is beyond the capabilities of your monitor: you "
@@ -1313,26 +1472,22 @@ msgstr ""
 "byste tím poškodit svůj monitor. Pokud jste na pochybách, vyberte si "
 "konzervativní nastavení a prověřte ho v dokumentaci k vašemu monitoru."
 
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:44
-msgid "<emphasis>Plug 'n Play</emphasis>"
-msgstr "<emphasis>Plug 'n Play</emphasis>"
+#. type: Content of: <section><variablelist><varlistentry><term>
+#: en/configureX_monitor.xml:64
+msgid "Plug'n Play"
+msgstr ""
 
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:47
+#. type: Content of: <section><variablelist><varlistentry><listitem><para>
+#: en/configureX_monitor.xml:67
+#, fuzzy
 msgid ""
-"This is the default option and tries to determine the monitor type from the "
-"monitor database."
+"This is the default option and automatically tries to determine the monitor "
+"type from the monitor database."
 msgstr ""
 "Toto je výchozí volba a snaží se určit typ monitoru z databáze monitorů."
 
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:51
-msgid "<emphasis>Vendor</emphasis>"
-msgstr "<emphasis>Dodavatel</emphasis>"
-
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:53
+#. type: Content of: <section><variablelist><varlistentry><listitem><para>
+#: en/configureX_monitor.xml:77
 msgid ""
 "If the installer has not correctly detected your monitor and you know which "
 "one you have, you can select it from the tree by selecting:"
@@ -1340,31 +1495,30 @@ msgstr ""
 "Pokud instalátor správně nerozpoznal váš monitor a vy víte, který máte, "
 "můžete si ho zvolit ze stromu pomocí výběru:"
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/configureX_monitor.xml:61
-msgid "the monitor manufacturers name"
-msgstr "název výrobce monitoru"
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureX_monitor.xml:86
+msgid "Manufacturer"
+msgstr ""
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/configureX_monitor.xml:65
-msgid "the monitor description"
-msgstr "popis monitoru"
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/configureX_monitor.xml:90
+msgid "Monitor model"
+msgstr ""
 
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:69
-msgid "<emphasis>Generic</emphasis>"
-msgstr "<emphasis>Všeobecný</emphasis>"
+#. type: Content of: <section><variablelist><varlistentry><term>
+#: en/configureX_monitor.xml:96
+msgid "Generic"
+msgstr ""
 
-#. type: Content of: <section><para>
-#: en/configureX_monitor.xml:71
+#. type: Content of: <section><variablelist><varlistentry><listitem><para>
+#: en/configureX_monitor.xml:99
 #, fuzzy
 msgid ""
-"selecting this group will list nearly 30 display configurations such as "
-"1024x768 @ 60Hz and includes flat panel displays as used in laptops. This is "
-"often a good monitor selection group if you need to use the <emphasis role="
-"\"bold\">Vesa</emphasis> card driver when your video hardware cannot be "
-"determined automatically. Once again it may be wise to be conservative in "
-"your selections."
+"Selecting this group will list nearly 30 display configurations such as "
+"1024x768 @ 60Hz and includes flat-panel displays as used in laptops. This is "
+"often a good monitor selection group if you need to use the VESA card driver "
+"when your video hardware cannot be determined automatically.  Once again it "
+"may be wise to be conservative in your selections."
 msgstr ""
 "výběr této skupiny zobrazí přibližně 30 nastavení obrazovky, jako jsou "
 "1024x768 @ 60Hz zahrnuje i ploché panelové obrazovky, jaké jsou používány ve "
@@ -1374,75 +1528,55 @@ msgstr ""
 "výběru konzervativní."
 
 #. type: Content of: <section><info><title>
-#: en/diskdrake.xml:7
-msgid "Custom disk partitioning with DiskDrake"
+#: en/diskdrake.xml:22
+#, fuzzy
+msgid "Custom Disk Partitioning with DiskDrake"
 msgstr "Vlastní rozdělení disku pomocí DiskDrake"
 
 #. type: Content of: <section><mediaobject>
-#: en/diskdrake.xml:12
-msgid ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake.png"
-"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
-"<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </imageobject>"
-msgstr ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake.png"
-"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
-"<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </imageobject>"
-
-#. type: Content of: <section><warning><para>
-#: en/diskdrake.xml:22
+#: en/diskdrake.xml:27
 #, fuzzy
 msgid ""
-"If you wish to use encryption on your <emphasis role=\"bold\">/</emphasis> "
-"partition you must ensure that you have a separate <emphasis role=\"bold\">/"
-"boot</emphasis> partition. The encryption option for the <emphasis role="
-"\"bold\">/boot</emphasis> partition must NOT be set, otherwise your system "
-"will be unbootable."
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-diskdrake.png\"/> </imageobject> <imageobject condition=\"live\"> "
+"<imagedata align=\"center\" fileref=\"live-diskdrake.png\"/> </imageobject>"
 msgstr ""
-"Pokud si přejete použít šifrování na vašem <literal>/</literal> oddílu, "
-"musíte se ujistit, že máte samostatný  oddíl <literal>/boot</literal>. Volba "
-"pro zašifrování NESMÍ být nastavena pro zaváděcí oddíl <literal>/boot</"
-"literal>, jinak váš systém nebude možné zavést."
+"<imageobject condition=\"classical\"><imagedata fileref=\"dx2-diskdrake2.png"
+"\" align=\"center\"/></imageobject><imageobject condition=\"live"
+"\"><imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/></"
+"imageobject>"
 
-#. type: Content of: <section><para>
-#: en/diskdrake.xml:29
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/diskdrake.xml:38
 #, fuzzy
 msgid ""
-"Modify the layout of your disk(s)  here. You can remove or create "
-"partitions, change the filesystem of a partition or change its size and even "
-"view their details before you start."
+"Modify the layout of your disk(s) here. You can remove or create partitions, "
+"change the filesystem or size of a partition and even view their details "
+"before you start."
 msgstr ""
 "Zde upravíte rozložení disku (disků). Můžete odstraňovat nebo vytvářet "
 "oddíly, měnit souborový systém oddílu, anebo měnit jeho velikost a dokonce "
 "se podívat, co je na něm, předtím než začnete."
 
-#. type: Content of: <section><para>
-#: en/diskdrake.xml:34
-msgid ""
-"There is a tab at the top for every detected hard disk (or other storage "
-"device like a USB key). In the screen-shot above there are two available "
-"devices: <emphasis role=\"bold\">sda </emphasis>and <emphasis role=\"bold"
-"\">sdb</emphasis>."
-msgstr ""
-
-#. type: Content of: <section><para>
-#: en/diskdrake.xml:39
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/diskdrake.xml:45
 #, fuzzy
 msgid ""
-"Take care with the <guibutton>Clear all</guibutton> option, use it only if "
-"you are sure you want to wipe all partitions on the selected storage device."
+"There is a tab at the top for every detected hard disk (or other storage "
+"device, like a USB key). In the screenshot above there are two available "
+"devices: <filename>sda </filename>and <filename>sdb</filename>."
 msgstr ""
-"Stiskněte <guibutton>Vyčistit vše</guibutton> pro smazání všech oddílů na "
-"vybraném úložném zařízení."
+"Je tam karta pro každý nalezený pevný disk nebo jiné úložné zařízení, jako "
+"je zařízení USB. Například sda, sdb a sdc, pokud jsou připojena tři."
 
-#. type: Content of: <section><para>
-#: en/diskdrake.xml:43
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/diskdrake.xml:52
 #, fuzzy
 msgid ""
 "For all other actions: click on the desired partition first. Then view it, "
 "or choose a filesystem and a mount point, resize it or wipe it. "
-"<guibutton>Expert mode</guibutton> provides more options such as a label "
-"(give a name to) a partition, or to choose a partition type."
+"<emphasis>Expert mode</emphasis> provides more options such as to label "
+"(name) a partition, or to choose a partition type."
 msgstr ""
 "Pro všechky ostatní činnosti: klepněte nejprve na požadovaný oddíl. Potom si "
 "jej prohlédněte, nebo si vyberte souborový systém a přípojný bod, změňte "
@@ -1450,34 +1584,71 @@ msgstr ""
 "guibutton> (nebo <guibutton>Expertní režim</guibutton>) dodá některé další "
 "nástroje jako je přidání štítku nebo vybrání typu oddílu."
 
-#. type: Content of: <section><para>
-#: en/diskdrake.xml:49
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/diskdrake.xml:60
 #, fuzzy
-msgid "Continue until you have adjusted everything to your satisfaction."
+msgid ""
+"Continue until you have adjusted everything to your satisfaction, then click "
+"<emphasis>Done</emphasis> when you're ready."
 msgstr "Pokračujte dokud jste nenastavil vše podle vašeho přání."
 
-#. type: Content of: <section><para>
-#: en/diskdrake.xml:52
-msgid "Click <guibutton>Done</guibutton> when you're ready."
+#. type: Content of: <section><warning><orderedlist><listitem><para>
+#: en/diskdrake.xml:69
+#, fuzzy
+msgid ""
+"Take care with the <emphasis>Clear all</emphasis> option, use it only if you "
+"are sure you want to wipe all partitions on the selected storage device."
+msgstr ""
+"Stiskněte <guibutton>Vyčistit vše</guibutton> pro smazání všech oddílů na "
+"vybraném úložném zařízení."
+
+#. type: Content of: <section><warning><orderedlist><listitem><para>
+#: en/diskdrake.xml:75
+#, fuzzy
+msgid ""
+"If you wish to use encryption on your <filename>/</filename> partition you "
+"must ensure that you have a separate <filename>/boot</filename> partition. "
+"The encryption option for the <filename>/boot</filename> partition must NOT "
+"be set, otherwise your system will be unbootable."
 msgstr ""
-"Klepněte na tlačítko <guibutton>Hotovo</guibutton>, když jste připraven."
+"Pokud si přejete použít šifrování na vašem <literal>/</literal> oddílu, "
+"musíte se ujistit, že máte samostatný  oddíl <literal>/boot</literal>. Volba "
+"pro zašifrování NESMÍ být nastavena pro zaváděcí oddíl <literal>/boot</"
+"literal>, jinak váš systém nebude možné zavést."
 
-#. type: Content of: <section><note><para>
-#: en/diskdrake.xml:56
+#. type: Content of: <section><important><itemizedlist><listitem><para>
+#: en/diskdrake.xml:87
 #, fuzzy
 msgid ""
 "If you are installing Mageia on a UEFI system, check that an ESP (EFI System "
-"Partition) is present and correctly mounted on /boot/EFI (see below)"
+"Partition) is present and correctly mounted on <filename>/boot/EFI</"
+"filename>. See Figure 1 below."
 msgstr ""
 "Pokud instalujete Mageiu na UEFI systému, zkontrolujte zda ESP (EFI System "
 "Partition) existuje a je připojen v /boot/EFI (více níže)"
 
-#. type: Content of: <section><note><para><mediaobject>
-#: en/diskdrake.xml:61
+#. type: Content of: <section><important><itemizedlist><listitem><para>
+#: en/diskdrake.xml:93
 #, fuzzy
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake2.png"
-"\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
+"If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot "
+"partition is present and of the correct type. See Figure 2 below."
+msgstr ""
+"Pokud instalujete Mageiu na systém Legacy/GPT, zkontrolujte, že je přítomen "
+"zaváděcí oddíl BIOS a že je správného typu"
+
+#. type: Content of: <section><figure><title>
+#: en/diskdrake.xml:101
+#, fuzzy
+msgid "EFI System Partition"
+msgstr "Použít existující oddíly"
+
+#. type: Content of: <section><figure><mediaobject>
+#: en/diskdrake.xml:104
+#, fuzzy
+msgid ""
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-diskdrake2.png\"/> </imageobject> <imageobject condition=\"live\"> "
 "<imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/> </imageobject>"
 msgstr ""
 "<imageobject condition=\"classical\"><imagedata fileref=\"dx2-diskdrake2.png"
@@ -1485,22 +1656,18 @@ msgstr ""
 "\"><imagedata align=\"center\" fileref=\"live-diskdrake2.png\"/></"
 "imageobject>"
 
-#. type: Content of: <section><note><para>
-#: en/diskdrake.xml:60
+#. type: Content of: <section><figure>
+#: en/diskdrake.xml:103 en/diskdrake.xml:117
 msgid "<placeholder type=\"mediaobject\" id=\"0\"/>"
 msgstr "<placeholder type=\"mediaobject\" id=\"0\"/>"
 
-#. type: Content of: <section><note><para>
-#: en/diskdrake.xml:72
-msgid ""
-"If you are installing Mageia on a Legacy/GPT system, check that a BIOS boot "
-"partition is present and of the correct type"
+#. type: Content of: <section><figure><title>
+#: en/diskdrake.xml:115
+msgid "BIOS boot partition"
 msgstr ""
-"Pokud instalujete Mageiu na systém Legacy/GPT, zkontrolujte, že je přítomen "
-"zaváděcí oddíl BIOS a že je správného typu"
 
-#. type: Content of: <section><note><mediaobject>
-#: en/diskdrake.xml:76
+#. type: Content of: <section><mediaobject>
+#: en/diskdrake.xml:118 en/doPartitionDisks.xml:200
 msgid ""
 "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
 "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
@@ -1513,52 +1680,60 @@ msgstr ""
 "imageobject>"
 
 #. type: Content of: <section><info><title>
-#: en/doPartitionDisks.xml:9
-msgid "Partitioning"
+#: en/doPartitionDisks.xml:25
+#, fuzzy
+msgid "Suggested Partitioning"
 msgstr "Rozdělení disku"
 
 #. type: Content of: <section><para>
-#: en/doPartitionDisks.xml:12
+#: en/doPartitionDisks.xml:28
 #, fuzzy
 msgid ""
 "In this screen you can see the content of your hard drive(s) along with the "
-"DrakX partitioning proposals for where to install <application>Mageia</"
-"application>."
+"DrakX partitioning proposals for where to install Mageia."
 msgstr ""
 "V této obrazovce můžete vidět obsah vašeho pevného disku (disků) a vidět "
 "nalezená řešení průvodce DrakX rozdělováním disku navrhujícího, kam "
 "nainstalovat <application>Mageiu</application>."
 
 #. type: Content of: <section><para>
-#: en/doPartitionDisks.xml:16
+#: en/doPartitionDisks.xml:32
 #, fuzzy
 msgid ""
-"The options available from those shown below will vary according to the "
-"layout and content of your particular hard drive(s)."
+"The actual options available from those shown below will vary according to "
+"the layout and content of your particular hard drive(s)."
 msgstr ""
 "Volby dostupné z níže uvedeného seznamu se budou lišit v závislosti na "
 "rozložení a obsahu vašeho konkrétního pevného disku."
 
 #. type: Content of: <section><mediaobject>
-#: en/doPartitionDisks.xml:21
+#: en/doPartitionDisks.xml:37
+#, fuzzy
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" align="
-"\"center\"/> </imageobject>"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-doPartitionDisks.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks.png\"/> </"
+"imageobject>"
 msgstr ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" align="
-"\"center\"/> </imageobject>"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </"
+"imageobject>"
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:32
-msgid "Use Existing Partitions"
-msgstr "Použít existující oddíly"
+#. type: Content of: <section><itemizedlist><title>
+#: en/doPartitionDisks.xml:47
+#, fuzzy
+msgid "Main Options"
+msgstr "Volby"
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:35
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:50
+#, fuzzy
+msgid "<emphasis role=\"bold\">Use Existing Partitions</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:53
 msgid ""
 "If this option is available, then existing Linux compatible partitions have "
 "been found and may be used for the installation."
@@ -1566,13 +1741,14 @@ msgstr ""
 "Pokud je dostupná tato volba, potom byly nalezeny stávající s Linuxem "
 "kompatibilní oddíly a tyto mohou být použity pro instalaci."
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:41
-msgid "Use Free Space"
-msgstr "Použít volné místo"
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:59
+#, fuzzy
+msgid "<emphasis role=\"bold\">Use Free Space</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:43
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:62
 msgid ""
 "If you have unused space on your hard drive then this option will use it for "
 "your new Mageia installation."
@@ -1580,109 +1756,88 @@ msgstr ""
 "Pokud máte nevyužité místo na vašem pevném disku, potom ho tato volba "
 "využije pro novou instalaci Mageii."
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:49
-msgid "Use Free Space on a Windows Partition"
-msgstr "Použít volné místo na oddílu Windows"
-
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:52
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:68
+#, fuzzy
 msgid ""
-"If you have unused space on an existing Windows partition, the installer may "
-"offer to use it."
-msgstr ""
-"Pokud máte nevyužité místo na stávajícím windowsovském oddíle, instalátor "
-"může nabídnout jeho použití."
+"<emphasis role=\"bold\">Use Free Space on a Windows Partition</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:56
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:71
+#, fuzzy
 msgid ""
-"This can be a useful way of making room for your new Mageia installation, "
-"but is a risky operation so you should make sure you have backed up all "
-"important files!"
+"If you have unused space on an existing Windows partition, the installer may "
+"offer to use it. This can be a useful way of making room for your new Mageia "
+"installation, but is a risky operation so you should make sure you have "
+"backed up all important files!"
 msgstr ""
 "Toto může být užitečná cesta vytvoření prostoru pro vaši novou instalaci "
 "Mageii, ale je to riziková operace, takže byste se měli ujistit, že máte "
 "zazálohovány všechny důležité soubory!"
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:61
-msgid ""
-"Note that this involves shrinking the size of the Windows partition. The "
-"partition must be \"clean\", meaning that Windows must have closed down "
-"correctly the last time it was used. It must also have been defragmented, "
-"although this is not a guarantee that all files in the partition have been "
-"moved out of the area that is about to be used. It is highly recommended to "
-"back up your personal files."
-msgstr ""
-"Pamatujte, že toto znamená zmenšení velikosti windowsovského oddílu. Oddíl "
-"musí být \"čistý\", to znamená, že Windows musely být správně vypnuty, když "
-"byly naposledy použity. Též musely být defragmentovány, ačkoli toto není "
-"zárukou, že všechny soubory na oddíle byly přesunuty z oblasti, která má být "
-"použita. Velice se doporučuje provedení zálohy vašich osobních souborů."
-
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:69
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:77
 #, fuzzy
 msgid ""
 "With this option, the installer displays the remaining Windows partition in "
 "light blue and the proposed Mageia partition in dark blue with their "
 "intended sizes just underneath. You have the option to modify these sizes by "
-"clicking and dragging the gap between both partitions. See the following "
-"screen-shot."
+"clicking and dragging the gap between both partitions.  See the following "
+"screenshot:"
 msgstr ""
 "U této volby instalátor zobrazí zůstávající windowsovský oddíl v světlemodré "
 "a budoucí oddíl Mageii v tmavomodré barvě spolu s jejich zamýšlenými "
 "velikostmi pod nimi. Máte možnost přizpůsobit tyto velikosti klepnutím a "
 "přesunutím mezery mezi oběma oddíly. Viz snímek obrazovky níže."
 
-#. type: Content of: <section><para><itemizedlist><listitem><mediaobject>
-#: en/doPartitionDisks.xml:76
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:85
 #, fuzzy
-msgid ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"doPartitionDisks2.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks2.png\" align="
-"\"center\"/> </imageobject>"
-msgstr ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" align="
-"\"center\"/> </imageobject>"
-
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:87
-msgid "Erase and use Entire Disk."
-msgstr "Smazat a použít celý disk"
+msgid "<emphasis role=\"bold\">Erase and use Entire Disk</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:90
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:88
 #, fuzzy
-msgid "This option will allocate the entire drive for Mageia."
+msgid "This option will allocate the entire drive for Mageia"
 msgstr "Tato volba použije celé diskové zařízení pro Mageiu."
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:93
-msgid "Note! This will erase ALL data on the selected hard drive. Take care!"
-msgstr "Pozor, toto smaže všechna data na vybraném disku. Buďte opatrní!"
-
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:96
+#. type: Content of: <section><itemizedlist><listitem><warning><para>
+#: en/doPartitionDisks.xml:92
+#, fuzzy
 msgid ""
-"If you intend to use part of the disk for something else, or you already "
-"have data on the drive that you are not prepared to lose, then do not use "
-"this option."
+"This will erase ALL data on the selected hard drive. Take care! If you "
+"intend to use part of the disk for something else, or you already have data "
+"on the drive that you are not prepared to lose, then do not use this option."
 msgstr ""
 "Pokud zamýšlíte použít část disku na něco jiného, nebo už máte data na onom "
 "disku, která nejste připraveni ztratit, potom tuto volbu nepoužívejte."
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:103
-msgid "Custom disk partitioning"
-msgstr "Vlastní rozdělení disku"
+#. type: Content of: <section><itemizedlist><listitem><important><para>
+#: en/doPartitionDisks.xml:99
+msgid ""
+"Note that this involves shrinking the size of the Windows partition. The "
+"partition must be \"clean\", meaning that Windows must have closed down "
+"correctly the last time it was used. It must also have been defragmented, "
+"although this is not a guarantee that all files in the partition have been "
+"moved out of the area that is about to be used. It is highly recommended to "
+"back up your personal files."
+msgstr ""
+"Pamatujte, že toto znamená zmenšení velikosti windowsovského oddílu. Oddíl "
+"musí být \"čistý\", to znamená, že Windows musely být správně vypnuty, když "
+"byly naposledy použity. Též musely být defragmentovány, ačkoli toto není "
+"zárukou, že všechny soubory na oddíle byly přesunuty z oblasti, která má být "
+"použita. Velice se doporučuje provedení zálohy vašich osobních souborů."
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:106
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:110
+#, fuzzy
+msgid "<emphasis role=\"bold\">Custom Disk Partitioning</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:113
 msgid ""
 "This gives you complete control over the placing of the installation on your "
 "hard drive(s)."
@@ -1690,81 +1845,100 @@ msgstr ""
 "Toto vám dává úplnou kontrolu nad umístěním instalace na vašem pevném disku "
 "(resp. discích)."
 
-#. type: Content of: <section><para>
-#: en/doPartitionDisks.xml:112
-msgid "<emphasis role=\"bold\">Partition sizing:</emphasis>"
-msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+#. type: Content of: <section><mediaobject>
+#: en/doPartitionDisks.xml:120
+#, fuzzy
+msgid ""
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-doPartitionDisks2.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks2.png\"/> </"
+"imageobject>"
+msgstr ""
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </"
+"imageobject>"
 
 #. type: Content of: <section><para>
-#: en/doPartitionDisks.xml:114
+#: en/doPartitionDisks.xml:129
 msgid ""
-"If you are not using the <emphasis role=\"bold\">Custom disk partitioning</"
-"emphasis> option, the installer will allocate the available space according "
-"to the following rules:"
+"If you are not using the <emphasis>Custom disk partitioning</emphasis> "
+"option, then the installer will allocate the available space according to "
+"the following rules:"
 msgstr ""
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:120
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:135
 #, fuzzy
 msgid ""
 "If the total available space is less than 50 GB, then only one partition is "
-"created. This will be the <emphasis role=\"bold\">/</emphasis> (root) "
-"partition."
+"created. This will be the <filename>/</filename> (root)  partition."
 msgstr ""
 "Pokud je celkové dostupné místo menší než 50 GB, bude vytvořen jen jeden "
 "oddíl pro /, nebude tu žádný samostatný oddíl pro /home."
 
-#. type: Content of: <section><para><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:125
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:141
 #, fuzzy
 msgid ""
 "If the total available space is greater than 50 GB, then three partitions "
 "are created"
 msgstr "Pokud je celkové dostupné místo nad 50 GB, potom se vytvoří tři oddíly"
 
-#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:130
+#. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:146
 #, fuzzy
 msgid ""
-"6/19 of the total available place is allocated to <emphasis role=\"bold\">/</"
-"emphasis> with a maximum of 50 GB"
+"6/19 of the total available place is allocated to <filename>/</filename> "
+"with a maximum of 50 GB"
 msgstr ""
 "6/19 z celkového dostupného místa je přideleno pro / , nanejvýš však 50 GB"
 
-#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:134
-msgid "1/19 is allocated to swap with a maximum of 4 GB"
+#. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:151
+#, fuzzy
+msgid "1/19 is allocated to <filename>swap</filename> with a maximum of 4 GB"
 msgstr "1/19 je přiděleno pro swap , nanejvýš však 4 GB"
 
-#. type: Content of: <section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/doPartitionDisks.xml:138
+#. type: Content of: <section><itemizedlist><listitem><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:156
 #, fuzzy
 msgid ""
-"the rest (at least 12/19) is allocated to <emphasis role=\"bold\">/home.</"
-"emphasis>"
+"the rest (at least 12/19) is allocated to <emphasis>/</"
+"emphasis><filename>home</filename><emphasis role=\"bold\">.</emphasis>"
 msgstr "zbytek (přinejmenším 12/19) je přiděleno pro /home"
 
 #. type: Content of: <section><para>
-#: en/doPartitionDisks.xml:144
-#, fuzzy
+#: en/doPartitionDisks.xml:164
 msgid ""
-"That means that from 160 GB or greater available space, the installer will "
-"create three partitions: 50 GB for <emphasis role=\"bold\">/</emphasis>, 4 "
-"GB for <emphasis role=\"bold\">swap</emphasis> and the remainder for "
-"<emphasis role=\"bold\">/home</emphasis>."
+"This means that from 160 GB or greater available space, the installer will "
+"create three partitions:"
+msgstr ""
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:169
+msgid "50 GB for <filename>/</filename>"
+msgstr ""
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:173
+msgid "4 GB for <filename>swap</filename>"
+msgstr ""
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:177
+msgid "and the remainder for <filename>/home</filename>."
 msgstr ""
-"To znamená, že v případě 160 GB a víc z dostupného místa, instalátor vytvoří "
-"tři oddíly: 50 GB pro /, 4 GB pro swap a zbytek pro adresář /home."
 
 #. type: Content of: <section><note><para>
-#: en/doPartitionDisks.xml:150
+#: en/doPartitionDisks.xml:182
 #, fuzzy
 msgid ""
 "If you are using a UEFI system, the ESP (EFI System Partition) will be "
-"automatically detected - or created if it does not exist yet, and mounted "
-"on /boot/EFI. The <emphasis role=\"bold\">Custom disk partitioning</"
+"automatically detected - or created if it does not exist yet - and mounted "
+"on <filename>/boot/EFI</filename>. The <emphasis>Custom disk partitioning</"
 "emphasis> option is the only one that allows to check it has been correctly "
-"done"
+"done."
 msgstr ""
 "Pokud používáte systém UEFI, ESP (systémový oddíl EFI) bude automaticky "
 "rozpoznán, nebo vytvořen, pokud ještě neexistuje, a připojen na /boot/EFI. "
@@ -1772,46 +1946,39 @@ msgstr ""
 "zkontrolovat, že toto bylo provedeno správně."
 
 #. type: Content of: <section><note><para>
-#: en/doPartitionDisks.xml:158
+#: en/doPartitionDisks.xml:188
 msgid ""
-"If you are using a Legacy (CSM or BIOS) system with a GPT disk, you need to "
-"create a BIOS boot partition if not already existing. It is a roughly 1 MiB "
-"partition with no mount point. Choose <xref linkend=\"diskdrake\"/> to be "
-"able to create it with the Installer like any other partition, just select "
-"BIOS boot partition as the filesystem type."
+"If you are using a Legacy (also known as BIOS) system with a GPT partitioned "
+"disk, you need to create a BIOS boot partition if it doesn't already exist. "
+"It should be about 1 MiB with no mount point. It can be created with the "
+"Installer, under <emphasis>Custom disk partitioning</emphasis>, like any "
+"other partition. Be sure to select <quote>BIOS boot partition</quote> for "
+"filesystem type."
 msgstr ""
 
-#. type: Content of: <section><note><mediaobject>
-#: en/doPartitionDisks.xml:165
-msgid ""
-"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
-"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
-"\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </imageobject>"
+#. type: Content of: <section><note><para>
+#: en/doPartitionDisks.xml:195
+msgid "See <xref linkend=\"diskdrake\"/> for information on how to proceed."
 msgstr ""
-"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
-"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
-"\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </imageobject>"
 
-#. type: Content of: <section><note><mediaobject>
-#: en/doPartitionDisks.xml:175
+#. type: Content of: <section><mediaobject>
+#: en/doPartitionDisks.xml:210
+#, fuzzy
 msgid ""
-"<imageobject> <imagedata fileref=\"dx2-doPartitionDisks4.png\"/> </"
-"imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-doPartitionDisks4.png"
+"\"/> </imageobject>"
 msgstr ""
 "<imageobject> <imagedata fileref=\"dx2-doPartitionDisks4.png\"/> </"
 "imageobject>"
 
-#. type: Content of: <section><warning><para>
-#: en/doPartitionDisks.xml:182
+#. type: Content of: <section><important><para>
+#: en/doPartitionDisks.xml:216
 #, fuzzy
 msgid ""
 "Some newer drives are now using 4096 byte logical sectors, instead of the "
 "previous standard of 512. Due to lack of available hardware, the "
 "partitioning tool used in the installer has not been tested with such a "
-"drive. Also some SSD devices now use an erase block size over 1 MB. If you "
-"have such a device we suggest that you partition the drive in advance, using "
-"an alternative partitioning tool like <emphasis role=\"bold\">gparted</"
-"emphasis>, and to use the following settings:"
+"drive."
 msgstr ""
 "Některé novější mechaniky nyní používají 4096 bajtové logické sektory, "
 "namísto předchozího standardu 512 bajtových logických sektorů. Nástroj na "
@@ -1821,20 +1988,37 @@ msgstr ""
 "mechaniku, s použitím alternativních nástrojů na rozdělování disku, jakým je "
 "gparted, pokud vlastníte takové zařízení, a použít následující nastavení:"
 
-#. type: Content of: <section><warning><para>
-#: en/doPartitionDisks.xml:189
+#. type: Content of: <section><important><para>
+#: en/doPartitionDisks.xml:221
+#, fuzzy
+msgid ""
+"Some SSD devices now use an erase block size over 1 MB. If you have such a "
+"device we suggest that you partition the drive in advance, using an "
+"alternative partitioning tool like gparted, and to use the following "
+"settings:"
+msgstr ""
+"Některé novější mechaniky nyní používají 4096 bajtové logické sektory, "
+"namísto předchozího standardu 512 bajtových logických sektorů. Nástroj na "
+"dělení disku použitý v instalátoru nebyl kvůli nedostatku dostupného "
+"hardware testován s takovou mechanikou. Taktéž některé mechaniky ssd dnes "
+"používají velikost vymazávacího bloku nad 1 MB. Navrhuje se napřed rozdělit "
+"mechaniku, s použitím alternativních nástrojů na rozdělování disku, jakým je "
+"gparted, pokud vlastníte takové zařízení, a použít následující nastavení:"
+
+#. type: Content of: <section><important><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:228
 #, fuzzy
-msgid "<emphasis role=\"bold\">Align to</emphasis> = MiB"
+msgid "<emphasis>Align to</emphasis> = MiB"
 msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><warning><para>
-#: en/doPartitionDisks.xml:191
+#. type: Content of: <section><important><itemizedlist><listitem><para>
+#: en/doPartitionDisks.xml:232
 #, fuzzy
-msgid "<emphasis role=\"bold\">Free space preceding (MiB)</emphasis> = 2"
+msgid "<emphasis>Free space preceding (MiB)</emphasis> = 2"
 msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><warning><para>
-#: en/doPartitionDisks.xml:194
+#. type: Content of: <section><important><para>
+#: en/doPartitionDisks.xml:236
 #, fuzzy
 msgid ""
 "Also make sure all partitions are created using an even number of megabytes."
@@ -1842,39 +2026,41 @@ msgstr ""
 "Též se ujistěte, že všechny oddíly jsou vytvořeny se sudým počtem megabajtů."
 
 #. type: Content of: <article><info><title>
-#: en/DrakLive-cover.xml:4 en/DrakLive-cover.xml:30 en/DrakLive.xml:3
+#: en/DrakLive-cover.xml:15 en/DrakLive-cover.xml:54 en/DrakLive.xml:16
 msgid "Installation from LIVE medium"
 msgstr "Instalace ze ŽIVÉHO datového nosiče"
 
 #. type: Content of: <book><info>
-#: en/DrakLive-cover.xml:5 en/DrakX-cover.xml:4
+#: en/DrakLive-cover.xml:17 en/DrakX-cover.xml:14
 msgid "<publisher> <publishername>Mageia.org</publishername> </publisher>"
 msgstr "<publisher> <publishername>Mageia.org</publishername> </publisher>"
 
 #. type: Content of: <book><info><revhistory><revision><date>
-#: en/DrakLive-cover.xml:10
-msgid "January 2015"
-msgstr "Leden 2015"
+#: en/DrakLive-cover.xml:23
+msgid "March 2016"
+msgstr ""
 
 #. type: Content of: <book><info><revhistory><revision><revremark>
-#: en/DrakLive-cover.xml:11
+#: en/DrakLive-cover.xml:25
 msgid "Mageia 5"
 msgstr "Mageia 5"
 
 #. type: Content of: <book><info><cover><para>
-#: en/DrakLive-cover.xml:15 en/DrakX-cover.xml:14
+#: en/DrakLive-cover.xml:30 en/DrakX-cover.xml:27
 msgid "The Official Documentation for Mageia"
 msgstr "Oficiální dokumentace pro Mageiu"
 
 #. type: Content of: <book><info><cover><mediaobject>
-#: en/DrakLive-cover.xml:17
-msgid "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"
+#: en/DrakLive-cover.xml:33 en/DrakX-cover.xml:30
+#, fuzzy
+msgid ""
+"<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>"
 msgstr ""
 "<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>"
 
 #. type: Content of: <article><info><cover><para>
-#: en/DrakLive-cover.xml:21 en/DrakLive.xml:12 en/DrakX-cover.xml:20
-#: en/DrakX.xml:12
+#: en/DrakLive-cover.xml:38 en/DrakLive.xml:25 en/DrakX-cover.xml:35
+#: en/DrakX.xml:44
 msgid ""
 "The texts and screenshots in this manual are available under the CC BY-SA "
 "3.0 license <link ns6:href=\"http://creativecommons.org/licenses/by-sa/3.0/"
@@ -1885,8 +2071,8 @@ msgstr ""
 "creativecommons.org/licenses/by-sa/3.0/</link>."
 
 #. type: Content of: <article><info><cover><para>
-#: en/DrakLive-cover.xml:24 en/DrakLive.xml:15 en/DrakX-cover.xml:23
-#: en/DrakX.xml:15
+#: en/DrakLive-cover.xml:42 en/DrakLive.xml:29 en/DrakX-cover.xml:39
+#: en/DrakX.xml:48
 msgid ""
 "This manual was produced with the help of the <link ns6:href=\"http://www."
 "calenco.com\">Calenco CMS</link> developed by <link ns6:href=\"http://www."
@@ -1897,8 +2083,7 @@ msgstr ""
 "\">NeoDoc</link>em."
 
 #. type: Content of: <article><info><cover><para>
-#: en/DrakLive-cover.xml:26 en/DrakLive.xml:17 en/DrakX-cover.xml:25
-#: en/DrakX.xml:17
+#: en/DrakLive-cover.xml:46 en/DrakX-cover.xml:43 en/DrakX.xml:52
 msgid ""
 "It was written by volunteers in their free time. Please contact <link ns6:"
 "href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation Team</"
@@ -1908,15 +2093,15 @@ msgstr ""
 "href=\"https://wiki.mageia.org/en/Documentation_team\">Dokumentačním týmem</"
 "link>, pokud byste chtěli pomoci tuto příručku vylepšit."
 
-#. type: Content of: <article><info><cover><para><note>
-#: en/DrakLive-cover.xml:31 en/DrakLive.xml:6 en/DrakX-cover.xml:36
-#: en/DrakX.xml:6
+#. type: Content of: <section><itemizedlist><listitem><para><note>
+#: en/DrakLive-cover.xml:56 en/DrakLive.xml:19 en/DrakX-cover.xml:64
+#: en/DrakX.xml:38 en/selectKeyboard.xml:49
 msgid "<note>"
 msgstr "<note>"
 
 #. type: Content of: <article><info><cover><para><note><para>
-#: en/DrakLive-cover.xml:32 en/DrakLive.xml:7 en/DrakX-cover.xml:37
-#: en/DrakX.xml:7
+#: en/DrakLive-cover.xml:57 en/DrakLive.xml:20 en/DrakX-cover.xml:65
+#: en/DrakX.xml:39
 msgid ""
 "No one will see all the installer screens that you see in this manual. Which "
 "screens you will see, depends on your hardware and the choices you make "
@@ -1926,43 +2111,49 @@ msgstr ""
 "příručce. Kterou obrazovku uvidíte, záleží na vašem vybavení počítače a na "
 "volbách, které učiníte během instalace."
 
-#. type: Content of: <article><info><cover><para>
-#: en/DrakLive-cover.xml:35 en/DrakLive.xml:10 en/DrakX-cover.xml:40
-#: en/DrakX.xml:10
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/DrakLive-cover.xml:60 en/DrakLive.xml:23 en/DrakX-cover.xml:68
+#: en/DrakX.xml:42 en/selectKeyboard.xml:56
 msgid "</note>"
 msgstr "</note>"
 
+#. type: Content of: <article><info><cover><para>
+#: en/DrakLive.xml:33
+#, fuzzy
+msgid ""
+"It was written by volunteers in their free time. Please contact the <link "
+"ns6:href=\"https://wiki.mageia.org/en/Documentation_team\">Documentation "
+"Team</link>, if you would like to help improve this manual."
+msgstr ""
+"Byl napsán dobrovolníky v jejich volném čase. Spojte se, prosím, s <link ns6:"
+"href=\"https://wiki.mageia.org/en/Documentation_team\">Dokumentačním týmem</"
+"link>, pokud byste chtěli pomoci tuto příručku vylepšit."
+
 #. type: Content of: <article><info><title>
-#: en/DrakX-cover.xml:3 en/DrakX-cover.xml:35 en/DrakX.xml:3
+#: en/DrakX-cover.xml:12 en/DrakX-cover.xml:61 en/DrakX.xml:35
 msgid "Installation with DrakX"
 msgstr "Instalace pomocí DrakX"
 
 #. type: Content of: <book><info><revhistory><revision><date>
-#: en/DrakX-cover.xml:9
+#: en/DrakX-cover.xml:20
 msgid "February 2014"
 msgstr "Únor 2014"
 
 #. type: Content of: <book><info><revhistory><revision><revremark>
-#: en/DrakX-cover.xml:10
+#: en/DrakX-cover.xml:22
 msgid "Mageia 4"
 msgstr "Mageia 4"
 
-#. type: Content of: <book><info><cover><mediaobject>
-#: en/DrakX-cover.xml:16
-#, fuzzy
-msgid ""
-"<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>"
-msgstr ""
-"<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>"
-
 #. type: Content of: <section><info><title>
 #: en/exitInstall.xml:3
 msgid "Congratulations"
 msgstr "Gratulujeme"
 
 #.  Lebarhon 20170209 updated SC
+#. 2018/02/12 apb: Text and typography.
+#. 2018/02/25 apb: Added clickable link to mageia.org
 #. type: Content of: <section><mediaobject>
-#: en/exitInstall.xml:9
+#: en/exitInstall.xml:13
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-exitInstall.png\" "
 "align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>"
@@ -1971,27 +2162,27 @@ msgstr ""
 "align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/exitInstall.xml:14
+#: en/exitInstall.xml:18
+#, fuzzy
 msgid ""
-"You have finished installing and configuring <application>Mageia</"
-"application> and it is now safe to remove the installation medium and reboot "
-"your computer."
+"You have finished installing and configuring Mageia and it is now safe to "
+"remove the installation medium and reboot your computer."
 msgstr ""
 "Dokončili jste instalaci a nastavení <application>Mageii</application> a teď "
 "je bezpečné vyjmout instalační médium a restartovat počítač."
 
 #. type: Content of: <section><para>
-#: en/exitInstall.xml:18
+#: en/exitInstall.xml:22
 #, fuzzy
 msgid ""
-"After reboot, in the bootloader screen, you can choose between the operating "
-"systems (if there are more than one) on your computer."
+"After rebooting, you can use the bootloader screen to choose which operating "
+"system to start (if there are more than one on your computer)."
 msgstr ""
 "Po restartu, na obrazovce zavaděče, si můžete vybrat mezi operačními systémy "
 "ve vašem počítači (pokud jich máte víc než jeden)."
 
 #. type: Content of: <section><para>
-#: en/exitInstall.xml:22
+#: en/exitInstall.xml:26
 msgid ""
 "If you didn't adjust the settings for the bootloader, your Mageia install "
 "will be automatically selected and started."
@@ -2000,26 +2191,27 @@ msgstr ""
 "vybrána a spuštěna vaše nainstalovaná Mageia."
 
 #. type: Content of: <section><para>
-#: en/exitInstall.xml:26
+#: en/exitInstall.xml:30
 msgid "Enjoy!"
 msgstr "Bavte se!"
 
 #. type: Content of: <section><para>
-#: en/exitInstall.xml:28
+#: en/exitInstall.xml:32
+#, fuzzy
 msgid ""
-"Visit www.mageia.org if you have any questions or want to contribute to "
-"Mageia"
+"Visit <link ns4:href=\"http://www.mageia.org/en/\">www.mageia.org/en/</link> "
+"if you have any questions or want to contribute to Mageia"
 msgstr ""
 "Navštivte www.mageia.org, pokud máte nějaké otázky nebo pokud chcete přispět "
 "do Mageii"
 
 #. type: Content of: <section><info><title>
-#: en/firewall.xml:3
+#: en/firewall.xml:7
 msgid "Firewall"
 msgstr "Firewall"
 
 #. type: Content of: <section><para>
-#: en/firewall.xml:6
+#: en/firewall.xml:10
 msgid ""
 "This section allows you to configure some simple firewall rules: they "
 "determine which type of message from the Internet will be accepted by the "
@@ -2028,46 +2220,46 @@ msgid ""
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/firewall.xml:12
+#: en/firewall.xml:16
 msgid ""
 "In the default setting (no button is checked), no service of the system is "
-"accessible from the network. The <emphasis role=\"bold\">Everything (no "
-"firewall)</emphasis> enables access to all services of the machine - an "
-"option that does not make much sense in the context of the installer since "
-"it would create a totally unprotected system. Its veritable use is in the "
-"context of the Mageia Control Center (which uses the same GUI layout) for "
-"temporarily disabling the entire set of firewall rules for testing and "
-"debugging purposes."
+"accessible from the network. The <emphasis>Everything (no firewall)</"
+"emphasis> option enables access to all services of the machine - an option "
+"that does not make much sense in the context of the installer since it would "
+"create a totally unprotected system. Its veritable use is in the context of "
+"the Mageia Control Center (which uses the same GUI layout)  for temporarily "
+"disabling the entire set of firewall rules for testing and debugging "
+"purposes."
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/firewall.xml:21
+#: en/firewall.xml:25
 msgid ""
 "All other options are more or less self-explanatory. As an example, you will "
-"enable the <emphasis role=\"bold\">CUPS server</emphasis> if you want "
-"printers on your machine to be accessible from the network."
+"enable the CUPS server if you want printers on your machine to be accessible "
+"from the network."
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/firewall.xml:25
+#: en/firewall.xml:29
 msgid "<emphasis role=\"bold\">Advanced</emphasis>"
 msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><para>
-#: en/firewall.xml:27
+#: en/firewall.xml:31
 msgid ""
-"The <emphasis role=\"bold\">Advanced</emphasis> option opens a window where "
-"you can enable a series of services by typing a list of couples (blank "
+"The <emphasis>Advanced</emphasis> option opens a window where you can enable "
+"a series of services by typing a list of <quote>couples</quote> (blank "
 "separated)"
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/firewall.xml:31
+#: en/firewall.xml:35
 msgid "<emphasis>&lt;port-number>/&lt;protocol></emphasis>"
 msgstr "<emphasis>&lt;port-number>/&lt;protocol></emphasis>"
 
 #. type: Content of: <section><simplelist><member>
-#: en/firewall.xml:34
+#: en/firewall.xml:38
 msgid ""
 "- <emphasis>&lt;port-number></emphasis> is the value of the port assigned to "
 "the service you want to enable (e.g. 873 for the RSYNC service) as defined "
@@ -2075,7 +2267,7 @@ msgid ""
 msgstr ""
 
 #. type: Content of: <section><simplelist><member>
-#: en/firewall.xml:38
+#: en/firewall.xml:42
 msgid ""
 "- <emphasis>&lt;protocol></emphasis> is one of <emphasis>TCP</emphasis> or "
 "<emphasis>UDP</emphasis> - the internet protocol that is used by the service."
@@ -2085,21 +2277,21 @@ msgstr ""
 "službou."
 
 #. type: Content of: <section><para>
-#: en/firewall.xml:43
+#: en/firewall.xml:47
 msgid ""
 "For instance, the entry for enabling access to the RSYNC service therefore "
 "is <emphasis>873/tcp</emphasis>."
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/firewall.xml:46
+#: en/firewall.xml:50
 msgid ""
 "In case a service is implemented to use both protocols, you specify 2 "
 "couples for the same port."
 msgstr ""
 
 #. type: Content of: <section><info><title>
-#: en/formatPartitions.xml:3
+#: en/formatPartitions.xml:10
 msgid "Formatting"
 msgstr "Formátování"
 
@@ -2107,15 +2299,16 @@ msgstr "Formátování"
 #.  NEEDS TO BE REVIEWED! 
 #.  marja 2012-04-24 added screenshot 
 #.  marja 2012-04-24 added emphasis tags in formatPartitions-pa1 
+#. 2018/02/10 apb: Text and typography.
 #. type: Content of: <section><mediaobject>
-#: en/formatPartitions.xml:15
+#: en/formatPartitions.xml:24
 #, fuzzy
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
-"\"dx2-formatPartitions.png\" xml:id=\"formatPartitions-im1\" align=\"center"
-"\" revision=\"1\"/> </imageobject> <imageobject condition=\"live\"> "
-"<imagedata format=\"PNG\" xml:id=\"live-formatPartitions-im1\" align=\"center"
-"\" fileref=\"live-formatPartitions.png\" revision=\"1\"/> </imageobject>"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-formatPartitions.png\" format=\"PNG\" revision=\"1\" xml:id="
+"\"formatPartitions-im1\"/> </imageobject> <imageobject condition=\"live\"> "
+"<imagedata align=\"center\" fileref=\"live-formatPartitions.png\" format="
+"\"PNG\" revision=\"1\" xml:id=\"live-formatPartitions-im1\"/> </imageobject>"
 msgstr ""
 "<imageobject condition='classical'> <imagedata revision=\"1\" fileref=\"dx2-"
 "formatPartitions.png\" format=\"PNG\" align=\"center\" xml:id="
@@ -2125,7 +2318,7 @@ msgstr ""
 "</imagedata> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/formatPartitions.xml:24
+#: en/formatPartitions.xml:35
 #, fuzzy
 msgid ""
 "Here you can choose which partition(s) you wish to format. Any data on "
@@ -2136,28 +2329,31 @@ msgstr ""
 "budou ušetřena."
 
 #. type: Content of: <section><para>
-#: en/formatPartitions.xml:28
-msgid "Usually at least the partitions DrakX selected, need to be formatted"
+#: en/formatPartitions.xml:39
+#, fuzzy
+msgid ""
+"Usually, at least the partitions that DrakX selected need to be formatted."
 msgstr ""
 "Obyčejně potřebují být naformátovány přinejmenším oddíly, které DrakX vybral."
 
 #. type: Content of: <section><para>
-#: en/formatPartitions.xml:31
+#: en/formatPartitions.xml:42
+#, fuzzy
 msgid ""
-"Click on <guibutton>Advanced</guibutton> to choose partitions you want to "
-"check for so called <emphasis>bad blocks</emphasis>"
+"Click on <emphasis>Advanced</emphasis> to choose the partitions you want to "
+"check for so-called <emphasis>bad blocks</emphasis>"
 msgstr ""
 "Klepněte na <guibutton>Pokročilé</guibutton> pro výběr oddílů, které chcete "
 "zkontrolovat na takzvané <emphasis>chybné bloky</emphasis>"
 
 #. type: Content of: <section><tip><para>
-#: en/formatPartitions.xml:36
+#: en/formatPartitions.xml:47
 #, fuzzy
 msgid ""
 "If you're not sure you have made the right choice, you can click on "
-"<guibutton>Previous</guibutton>, again on <guibutton>Previous</guibutton> "
-"and then on <guibutton>Custom</guibutton> to get back to the main screen, "
-"where you can choose to view details of your partitions."
+"<emphasis>Previous</emphasis>, again on <emphasis>Previous</emphasis> and "
+"then on <emphasis>Custom</emphasis> to get back to the main screen, where "
+"you can choose to view details of your partitions."
 msgstr ""
 "Pokud si nejste jistí, zda jste vykonali správnou volbu, můžete klepnout na "
 "tlačítko <guibutton>Předchozí</guibutton>, opět na <guibutton>Předchozí</"
@@ -2166,21 +2362,22 @@ msgstr ""
 "na vašich oddílech."
 
 #. type: Content of: <section><para>
-#: en/formatPartitions.xml:43
+#: en/formatPartitions.xml:54
+#, fuzzy
 msgid ""
-"When you are confident about the selection, click on <guibutton>Next</"
-"guibutton> to continue."
+"When you are confident about the selections, click on <emphasis>Next</"
+"emphasis> to continue."
 msgstr ""
 "Pokud jste spokojen s výběrem, klepněte na <guibutton>Další</guibutton> pro "
 "pokračování."
 
 #. type: Content of: <section><info><title>
-#: en/installer.xml:10
+#: en/installer.xml:14
 msgid "DrakX, the Mageia Installer"
 msgstr "DrakX, instalátor Mageii"
 
 #. type: Content of: <section><para>
-#: en/installer.xml:13
+#: en/installer.xml:16
 msgid ""
 "Whether you are new to GNU-Linux or an experienced user, the Mageia "
 "Installer is designed to help make your installation or upgrade as easy as "
@@ -2190,331 +2387,243 @@ msgstr ""
 "je navržen tak, aby instalace nebo aktualizace byla tak jednoduchá, jak jen "
 "je to možné."
 
-#. type: Content of: <section><para>
-#: en/installer.xml:17
-msgid ""
-"The initial menu screen has various options, however the default one will "
-"start the installer, which will normally be all that you will need."
-msgstr ""
-"Počáteční nabídková obrazovka má různé možnosti, každopádně předvolená "
-"spustí instalátor, který bude obyčejně mít vše, co potřebujete."
-
 #. type: Content of: <section><section><title>
-#: en/installer.xml:22
-msgid "Installation Welcome Screen"
-msgstr "Uvítací instalační obrazovka"
-
-#. type: Content of: <section><section><section><title>
-#: en/installer.xml:25
-msgid "Using a Mageia DVD"
-msgstr "Použití DVD Mageia"
+#: en/installer.xml:20
+msgid "The installation steps"
+msgstr "Instalační kroky"
 
-#. type: Content of: <section><section><section><para>
-#: en/installer.xml:27
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/installer.xml:23
 #, fuzzy
 msgid ""
-"Here are the default welcome screens when using a Mageia DVD, The first one "
-"is what you will see if you have a UEFI system, the second one is for a "
-"Legacy system:"
+"The install process is divided into a number of steps - the status of which "
+"is indicated in a panel to the left of the screen."
 msgstr ""
-"Zde jsou výchozí uvítací obrazovky při používaní DVD Mageia. První je se "
-"systémem UEFI a druhá se zastaralým systémem:"
-
-#. type: Content of: <section><section><section><mediaobject>
-#: en/installer.xml:32
-msgid "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>"
-msgstr "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>"
+"Proces instalace je rozdělen do více kroků, které je možné sledovat na "
+"bočním panelu obrazovky."
 
-#. type: Content of: <section><section><section><para>
-#: en/installer.xml:37
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/installer.xml:28
+#, fuzzy
 msgid ""
-"From this screen, you have access to options by pressing \"<emphasis role="
-"\"bold\">e</emphasis>\" to enter the edit mode. To come back to this screen, "
-"press either <emphasis role=\"bold\">Esc</emphasis> key to quit without "
-"saving or press the key <emphasis role=\"bold\">Ctrl</emphasis> or <emphasis "
-"role=\"bold\">F10</emphasis> to quit with saving."
+"Each step has one or more screens, which may also have <emphasis>Advanced</"
+"emphasis> sections with extra, less commonly required options."
 msgstr ""
+"Každý krok má jednu nebo více obrazovek, které též můžou mít tlačítka "
+"<guibutton>Pokročilé</guibutton> s obyčejně méně žádanými možnostmi navíc."
 
-#. type: Content of: <section><section><section><mediaobject>
-#: en/installer.xml:45
-msgid "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>"
-msgstr "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>"
-
-#. type: Content of: <section><section><section><para>
-#: en/installer.xml:50
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/installer.xml:33
+#, fuzzy
 msgid ""
-"From this screen, it is possible to set some preferences (note that the "
-"options <emphasis role=\"bold\">F1</emphasis> to <emphasis role=\"bold\">F6</"
-"emphasis> are available only on Legacy systems):"
+"Most screens have <emphasis>Help</emphasis> buttons for further details "
+"about the particular step."
 msgstr ""
+"Většina obrazovek má tlačítka <guibutton>Nápověda</guibutton>, která dávají "
+"bližší vysvětlení aktuálního kroku."
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:55
+#. type: Content of: <section><section><caution><para>
+#: en/installer.xml:38
+#, fuzzy
 msgid ""
-"Within any of the <emphasis role=\"bold\">F2</emphasis> to <emphasis role="
-"\"bold\">F6</emphasis> options, you can view relevant help by pressing "
-"<emphasis role=\"bold\">F1</emphasis>"
+"If at some point during the install you decide to abort the installation, it "
+"is possible to reboot, but please think twice before you do this. Once a "
+"partition has been formatted or updates have started to be installed, your "
+"computer is no longer in the same state and rebooting it could very well "
+"leave you with an unusable system."
 msgstr ""
+"Pokud se někde během instalace rozhodnete instalaci ukončit, je možný "
+"restart, ale promyslete si to, prosím, dvakrát, dříve než to uděláte. Když "
+"už byl oddíl jednou naformátován nebo se začaly instalovat aktualizace, váš "
+"počítač už nadále není ve stejném stavu a jeho opětovné spuštění by vás "
+"mohlo celkem snadno nechat s nepoužitelným systémem. Pokud jste si přesto "
+"velmi jistí, že chcete provést restart, jděte do textového terminálu za "
+"současného stisknutí tří kláves <guibutton>Alt+Ctrl+F2</guibutton>. Potom "
+"současně stiskněte <guibutton>Alt+Ctrl+Delete</guibutton> pro restart."
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:63
+#. type: Content of: <section><section><caution><para>
+#: en/installer.xml:43
 msgid ""
-"Press <emphasis role=\"bold\">F2</emphasis> to have the installer use a "
-"specific language for the installation."
+"If, in spite of this, you are very sure rebooting is what you want, go to a "
+"text terminal by pressing the keys <keycombo><keycap>Ctrl</"
+"keycap><keycap>Alt</keycap><keycap>F2</keycap></keycombo> together. After "
+"that, press <keycombo><keycap>Ctrl</keycap><keycap>Alt</"
+"keycap><keycap>Delete</keycap></keycombo> together to reboot."
 msgstr ""
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
-#: en/installer.xml:67
-msgid ""
-"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
-msgstr ""
-"<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
+#. type: Content of: <section><section><title>
+#: en/installer.xml:48
+msgid "Installation Welcome Screen"
+msgstr "Uvítací instalační obrazovka"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:72
-#, fuzzy
+#. type: Content of: <section><section><para>
+#: en/installer.xml:49
 msgid ""
-"Use the arrow keys to select the language then press <emphasis role=\"bold"
-"\">Enter</emphasis>."
-msgstr "Použijte šipkové klávesy pro výběr jazyka a stiskněte klávesu Enter."
+"The particular screen that you will first see when booting from the "
+"Installation media will depend on whether your computer motherboard is of "
+"the Legacy (BIOS) or UEFI type."
+msgstr ""
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:77
+#. type: Content of: <section><section><para>
+#: en/installer.xml:52
 #, fuzzy
 msgid ""
-"If needed, change the screen resolution by pressing <emphasis role=\"bold"
-"\">F3</emphasis> (Legacy mode only)."
+"The welcome menu screen has various options, however the default option will "
+"start the installer, and is normally all that you will need."
 msgstr ""
-"Změňte rozlišení obrazovky stisknutím klávesy F3 (jen v zastaralém režimu)."
+"Počáteční nabídková obrazovka má různé možnosti, každopádně předvolená "
+"spustí instalátor, který bude obyčejně mít vše, co potřebujete."
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
-#: en/installer.xml:81
-msgid ""
-"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
+#. type: Content of: <section><section><section><title>
+#: en/installer.xml:56
+msgid "Legacy (BIOS) Systems"
 msgstr ""
-"<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:88
+#. type: Content of: <section><section><section><mediaobject>
+#: en/installer.xml:58
+#, fuzzy
 msgid ""
-"If you experience problems with the installation, you could try modifying "
-"the default settings using the <emphasis role=\"bold\">F6</emphasis> "
-"<emphasis role=\"bold\">Kernel Options</emphasis> (for UEFI systems press "
-"<emphasis role=\"bold\">e</emphasis> instead)."
+"<imageobject> <imagedata fileref=\"dx-welcome.png\" align=\"center\"/> </"
+"imageobject>"
 msgstr ""
+"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
+"align=\"center\"/> </imageobject>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/installer.xml:96
-#, fuzzy
-msgid "Default: It doesn't alter anything in the default options."
-msgstr "- Výchozí, tato nemění nic ve výchozích volbách."
-
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/installer.xml:101
-msgid ""
-"Safe Settings: Priority is given to the safer options at the price of a "
-"performance detriment."
+#. type: Content of: <section><section><section><itemizedlist><title>
+#: en/installer.xml:63
+msgid "Menu"
 msgstr ""
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/installer.xml:106
-#, fuzzy
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:66
 msgid ""
-"No ACPI: (Advanced Configuration and Power Interface): Power management "
-"features are not used."
+"Install Mageia to a hard disk. This is the default option, and will "
+"automatically start after a short while unless another option is selected."
 msgstr ""
-"- Žádné ACPI (pokročilé rozhraní nastavení a napájení), správa napájení není "
-"brána do úvahy."
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/installer.xml:113
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:69
 #, fuzzy
-msgid ""
-"No Local APIC: (Local Advanced Programmable Interrupt Controller): CPU "
-"interrupt. Select this option if you experience system misbehaviour like a "
-"kernel panic in relation to APIC."
-msgstr ""
-"- Žádný místní APIC (lokální pokročilý programovatelný ovladač přerušení), "
-"jedná se o přerušení CPU, vyberte tuto volbu, pokud jste k tomu vyzváni."
+msgid "<emphasis role=\"bold\">Rescue System</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:120
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:70
 msgid ""
-"When you select one of these entries, it modifies the default options "
-"displayed in the <guilabel>Boot Options</guilabel> line."
+"This option allows you to either re-install the bootloader for an existing "
+"Mageia installation or you can use it to restore a Windows bootloader."
 msgstr ""
-"Když si vyberete jednu z těchto položek, tato změní výchozí volby zobrazené "
-"v řádku <guilabel>Volby zavádění systému</guilabel>."
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><note><para>
-#: en/installer.xml:125
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:75
 #, fuzzy
-msgid ""
-"In some Mageia releases, it may happen that the entries selected with "
-"<emphasis role=\"bold\">F6</emphasis> do not appear in the <guilabel>Boot "
-"Options</guilabel> line, despite this, they will in fact be applied."
-msgstr ""
-"V některých vydáních Mageii se může stát, že se položky vybrané klávesou F6 "
-"neobjevují v řádku <guilabel>Volby zavádění systému</guilabel>, avšak ve "
-"skutečnosti jsou brány do úvahy."
+msgid "<emphasis role=\"bold\">Memory Test</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
-#: en/installer.xml:132
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:76
 msgid ""
-"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
+"Test the installed RAM by performing multiple read and write operations. "
+"Reboot to end the test."
 msgstr ""
-"<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:139
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:80
 #, fuzzy
-msgid ""
-"Pressing <emphasis role=\"bold\">F1</emphasis> opens a help window for "
-"various boot options. Select an item with the arrow keys and press <emphasis "
-"role=\"bold\">Enter</emphasis> for more details or press <emphasis role="
-"\"bold\">Esc</emphasis> to go back to the welcome screen."
-msgstr ""
-"Stisknutí klávesy F1 otevře nové okno s dalšími dostupnými volbami. Vyberte "
-"jednu šipkovými klávesami a stiskněte klávesu Enter pro obdržení více "
-"podrobností nebo stiskněte klávesu Esc pro návrat na uvítací obrazovku."
+msgid "<emphasis role=\"bold\">F2: Language</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
-#: en/installer.xml:146
-msgid ""
-"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:81
+msgid "Press F2 for alternative languages."
 msgstr ""
-"<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:151
-#, fuzzy
-msgid ""
-"The detailed view about the splash option. Press <emphasis role=\"bold"
-"\">Esc</emphasis> or select <guilabel>Return to Boot Options</guilabel> to "
-"go back to the options list. These options can be added by hand in the "
-"<guilabel>Boot Options</guilabel> line."
+#. type: Content of: <section><section><section><title>
+#: en/installer.xml:86
+msgid "UEFI Systems"
 msgstr ""
-"Podrobný přehled o rozsahu voleb. Stiskněte Esc nebo zvolte <guilabel>návrat "
-"k parametrům spuštění</guilabel> pro návrat zpět do seznamu voleb. Tyto "
-"volby mohou být přidány ručně v řádku <guilabel>Volby zavádění systému</"
-"guilabel>."
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><mediaobject>
-#: en/installer.xml:158
+#. type: Content of: <section><section><section><para>
+#: en/installer.xml:87
 msgid ""
-"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
+"From this screen, you can access options by pressing <keycap>e</keycap> to "
+"enter the edit mode. To come back to this screen, press <keycap>Esc</keycap> "
+"to quit without saving or press <keycap>F10</keycap> to save and quit."
 msgstr ""
-"<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><note><para>
-#: en/installer.xml:164
+#. type: Content of: <section><section><section><mediaobject>
+#: en/installer.xml:92
 #, fuzzy
 msgid ""
-"The help is translated in the chosen language with <emphasis role=\"bold"
-"\">F2</emphasis>."
-msgstr "Nápověda je přeložena ve zvoleném jazyku pomocí klávesy F2."
-
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/installer.xml:168
-msgid ""
-"For more information about kernel options on legacy and UEFI systems, see: "
-"<link ns2:href=\"https://wiki.mageia.org/en/How_to_set_up_kernel_options"
-"\">https://wiki.mageia.org/en/How_to_set_up_kernel_options</link>"
+"<imageobject> <imagedata fileref=\"dx-welcome2.png\" align=\"center\"/> </"
+"imageobject>"
 msgstr ""
-"Pro více informací o volbách pro kernel na zastaralých systémech a systémech "
-"UEFI se podívejte na: <link ns2:href=\"https://wiki.mageia.org/en/"
-"How_to_set_up_kernel_options\">https://wiki.mageia.org/en/"
-"How_to_set_up_kernel_options</link>"
-
-#. type: Content of: <section><section><title>
-#: en/installer.xml:177
-msgid "The installation steps"
-msgstr "Instalační kroky"
+"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
+"align=\"center\"/> </imageobject>"
 
-#. type: Content of: <section><section><para>
-#: en/installer.xml:179
-#, fuzzy
-msgid ""
-"The install process is divided into a number of steps, the status of which "
-"is indicated in a panel to the left of the screen."
+#. type: Content of: <section><section><section><para>
+#: en/installer.xml:96
+msgid "In UEFI mode you have only two menu options to choose from:"
 msgstr ""
-"Proces instalace je rozdělen do více kroků, které je možné sledovat na "
-"bočním panelu obrazovky."
 
-#. type: Content of: <section><section><para>
-#: en/installer.xml:182
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:99
 #, fuzzy
-msgid ""
-"Each step has one or more screens which may also have <guibutton>Advanced</"
-"guibutton> sections with extra, less commonly required, options."
-msgstr ""
-"Každý krok má jednu nebo více obrazovek, které též můžou mít tlačítka "
-"<guibutton>Pokročilé</guibutton> s obyčejně méně žádanými možnostmi navíc."
+msgid "<emphasis role=\"bold\">Install:</emphasis> Start the Install process"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><section><para>
-#: en/installer.xml:186
-#, fuzzy
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/installer.xml:103
 msgid ""
-"Most screens have <guibutton>Help</guibutton> buttons for further details "
-"about the particular step."
+"<emphasis role=\"bold\">Rescue:</emphasis> This option allows you to either "
+"re-install the bootloader for an existing Mageia installation or you can use "
+"it to restore a Windows bootloader."
 msgstr ""
-"Většina obrazovek má tlačítka <guibutton>Nápověda</guibutton>, která dávají "
-"bližší vysvětlení aktuálního kroku."
 
-#. type: Content of: <section><section><note><para>
-#: en/installer.xml:190
+#. type: Content of: <section><section><section><para>
+#: en/installer.xml:109
 #, fuzzy
 msgid ""
-"If at some points during the install you decide to stop the installation, it "
-"is possible to reboot, but please think twice before you do this. Once a "
-"partition has been formatted or updates have started to be installed, your "
-"computer is no longer in the same state and rebooting it could very well "
-"leave you with an unusable system. If in spite of this you are very sure "
-"rebooting is what you want, go to a text terminal by pressing the three keys "
-"<guibutton>Alt Ctrl F2</guibutton> at the same time. After that, press "
-"<guibutton>Alt Ctrl Delete</guibutton> simultaneously to reboot."
+"If you booted from a USB stick, you will see the above options duplicated, "
+"and in this case, you should use the set that will be suffixed with \"USB\"."
 msgstr ""
-"Pokud se někde během instalace rozhodnete instalaci ukončit, je možný "
-"restart, ale promyslete si to, prosím, dvakrát, dříve než to uděláte. Když "
-"už byl oddíl jednou naformátován nebo se začaly instalovat aktualizace, váš "
-"počítač už nadále není ve stejném stavu a jeho opětovné spuštění by vás "
-"mohlo celkem snadno nechat s nepoužitelným systémem. Pokud jste si přesto "
-"velmi jistí, že chcete provést restart, jděte do textového terminálu za "
-"současného stisknutí tří kláves <guibutton>Alt+Ctrl+F2</guibutton>. Potom "
-"současně stiskněte <guibutton>Alt+Ctrl+Delete</guibutton> pro restart."
+"Pokud jste počítač spustili ze zařízení USB, dostanete dva doplňující řádky, "
+"které jsou duplikáty předchozích řádků zakončených zkratkou \"USB\". Máte je "
+"vybrat."
 
 #. type: Content of: <section><section><title>
-#: en/installer.xml:203
+#: en/installer.xml:115
 msgid "Installation Problems and Possible Solutions"
 msgstr "Problémy při instalaci a možné řešení"
 
 #. type: Content of: <section><section><section><title>
-#: en/installer.xml:206
+#: en/installer.xml:117
 msgid "No Graphical Interface"
 msgstr "Bez grafického rozhraní"
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/installer.xml:210
+#: en/installer.xml:120
+#, fuzzy
 msgid ""
-"After the initial screen you did not reach the language selection screen. "
-"This can happen with some graphic cards and older systems. Try using low "
-"resolution by typing <code>vgalo</code> at the prompt."
+"After the initial screen you did not progress to the <emphasis>Language "
+"Selection</emphasis> screen. This can happen with some graphic cards and "
+"older systems. Try using low resolution by typing <command>vgalo</command> "
+"at the prompt."
 msgstr ""
 "Po počáteční obrazovce vám nenaběhla obrazovka výběru jazyka. Toto se může "
 "stát s některými grafickými kartami a staršími systémy. Zkuste použít nízké "
 "rozlišení obrazovky napsáním <code>vgalo</code> v příkazovém řádku."
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/installer.xml:217
+#: en/installer.xml:126
 #, fuzzy
 msgid ""
 "If the hardware is very old, a graphical installation may not be possible. "
-"In this case it is worth trying a text mode installation. To use this press "
-"<emphasis role=\"bold\">Esc</emphasis> at the first welcome screen and "
-"confirm with <emphasis role=\"bold\">ENTER</emphasis>. You will be presented "
-"with a black screen with the word \"boot:\". Type \"text\" and press "
-"<emphasis role=\"bold\">ENTER</emphasis> to continue with the installation "
-"in text mode."
+"In this case it is worth trying a text-mode installation. To use this press "
+"<keycap>Esc</keycap> at the <emphasis>Welcome</emphasis> screen and confirm "
+"with <keycap>ENTER</keycap>. You will be presented with a black screen with "
+"a <prompt>boot:</prompt> prompt. Type <command>text</command> and press "
+"<keycap>ENTER</keycap> to continue with the installation in text mode."
 msgstr ""
 "Pokud je vybavení počítače velmi staré, grafická instalace nemusí být možná. "
 "V tomto případě se oplatí vyzkoušet instalaci v textovém režimu. Pro její "
@@ -2523,18 +2632,19 @@ msgstr ""
 "stiskněte ENTER. Nyní pokračujte instalací v textovém režimu."
 
 #. type: Content of: <section><section><section><title>
-#: en/installer.xml:230
+#: en/installer.xml:138
 msgid "The Install Freezes"
 msgstr "Instalace zamrzne"
 
 #. type: Content of: <section><section><section><para>
-#: en/installer.xml:232
+#: en/installer.xml:139
+#, fuzzy
 msgid ""
 "If the system appeared to freeze during the installation, this may be a "
-"problem with hardware detection. In this case the automatic detection of "
-"hardware may be bypassed and dealt with later. To try this, type "
-"<code>noauto</code> at the prompt. This option may also be combined with "
-"other options as necessary."
+"problem with hardware detection. In this case the automatic hardware "
+"detection may be bypassed and dealt with later. To try this, type "
+"<command>noauto</command> at the prompt. This option may also be combined "
+"with other parameters as necessary."
 msgstr ""
 "Pokud sa zdá, že systém během instalace zamrzává, může to být problém se "
 "zjišťováním vybavení počítače součástkami. V tomto případě může být "
@@ -2543,18 +2653,19 @@ msgstr ""
 "může být, když je třeba, též spojena i s jinými volbami."
 
 #. type: Content of: <section><section><section><title>
-#: en/installer.xml:240
+#: en/installer.xml:146
 msgid "RAM problem"
 msgstr "Problém paměti RAM"
 
 #. type: Content of: <section><section><section><para>
-#: en/installer.xml:242
+#: en/installer.xml:147
 #, fuzzy
 msgid ""
 "This will rarely be needed, but in some cases the hardware may report the "
 "available RAM incorrectly. To specify this manually, you can use the "
-"<code>mem=xxxM</code> parameter, where xxx is the correct amount of RAM. e."
-"g. <code>mem=256M</code> would specify 256MB of RAM."
+"<literal>mem=<replaceable>xxx</replaceable>M</literal> parameter, where "
+"<replaceable>xxx</replaceable> is the correct amount of RAM. e.g. "
+"<literal>mem=256M</literal> would specify 256MB of RAM."
 msgstr ""
 "Toto bude potřebné zřídka, ale v některých případech může hardware nesprávně "
 "ohlásit dostupnou paměť RAM. Abyste ji zadali ručně, můžete použít parametr "
@@ -2562,20 +2673,20 @@ msgstr ""
 "<code>mem=256M</code> by znamenalo 256 MB RAM."
 
 #. type: Content of: <section><section><section><title>
-#: en/installer.xml:249
+#: en/installer.xml:154
 msgid "Dynamic partitions"
 msgstr "Dynamické oddíly"
 
 #. type: Content of: <section><section><section><para>
-#: en/installer.xml:251
+#: en/installer.xml:155
 #, fuzzy
 msgid ""
-"If you converted your hard disk from <emphasis role=\"bold\">basic</"
-"emphasis> format to <emphasis role=\"bold\">dynamic</emphasis> format in "
-"Microsoft Windows, then it is not possible to install Mageia on this disc. "
-"To revert to a basic disk, see the Microsoft documentation: <link ns2:href="
-"\"http://msdn.microsoft.com/en-us/library/cc776315.aspx\">http://msdn."
-"microsoft.com/en-us/library/cc776315.aspx</link>."
+"If you converted your hard disk from <literal>Basic</literal> format to "
+"<literal>Dynamic</literal> format in Microsoft Windows, then it is not "
+"possible to install Mageia on this disc. To revert to a <literal>Basic</"
+"literal> disk, see the Microsoft documentation: <link ns2:href=\"http://msdn."
+"microsoft.com/en-us/library/cc776315.aspx\">http://msdn.microsoft.com/en-us/"
+"library/cc776315.aspx</link>."
 msgstr ""
 "Pokud jste váš pevný disk převedli ze \"základního\" formátu na \"dynamický"
 "\" formát v systému Microsoft Windows, musíte vědět, že je nemožné "
@@ -2585,19 +2696,15 @@ msgstr ""
 "cc776315.aspx</link>."
 
 #. type: Content of: <section><info><title>
-#: en/installUpdates.xml:3
+#: en/installUpdates.xml:16
 msgid "Updates"
 msgstr "Aktualizace"
 
-#.  Made by marja on 2012 03 30 
-#.  NEEDS TO BE REVIEWED! 
-#.  marja 20120418 removed xmlns="http://docbook.org/ns/docbook" xmlns:ns5="http://www.w3.org/1999/xhtml" xmlns:ns42="http://www.w3.org/1998/Math/MathML" xmlns:ns4="http://www.w3.org/1999/xlink" xmlns:ns3="http://www.w3.org/2000/svg"" from section tag, trying to restore correct html filename
-#.  marja, 2012-04-24 added screenshot 
 #. type: Content of: <section><mediaobject>
-#: en/installUpdates.xml:15
+#: en/installUpdates.xml:20
 #, fuzzy
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-installUpdates.png\" "
+"<imageobject> <imagedata format=\"png\" fileref=\"dx2-installUpdates.png\" "
 "align=\"center\" revision=\"1\" xml:id=\"installUpdates-im1\"/> </"
 "imageobject>"
 msgstr ""
@@ -2605,99 +2712,113 @@ msgstr ""
 "align=\"center\" revision=\"1\" xml:id=\"exitInstall-im1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/installUpdates.xml:20
+#: en/installUpdates.xml:25
+#, fuzzy
 msgid ""
-"Since this version of <application>Mageia</application> was released, some "
-"packages will have been updated or improved."
+"Since this version of Mageia was released, some packages will have been "
+"updated or improved."
 msgstr ""
 "Od té doby, co byla uvolněna tato verze operačního systému "
 "<application>Mageia</application>, byly některé balíčky aktualizovány nebo "
 "vylepšeny."
 
-#. type: Content of: <section><para>
-#: en/installUpdates.xml:24
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/installUpdates.xml:30
+msgid ""
+"Select <emphasis>Yes</emphasis> if you wish to download and install them"
+msgstr ""
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/installUpdates.xml:35
 #, fuzzy
 msgid ""
-"Choose <guilabel>Yes</guilabel> if you wish to download and install them, "
-"select <guilabel>No</guilabel> if you don't want to do this now, or if you "
+"Select <emphasis>No</emphasis> if you don't want to do this now, or if you "
 "aren't connected to the Internet"
 msgstr ""
 "Zvolte <guilabel>ano</guilabel>, pokud si je přejete stáhnout a "
 "nainstalovat, vyberte <guilabel>ne</guilabel>, pokud to teď nechcete udělat, "
 "nebo pokud nejste připojeni k internetu."
 
-#. type: Content of: <section><para>
-#: en/installUpdates.xml:29
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/installUpdates.xml:40
 #, fuzzy
-msgid "Press <guibutton>Next</guibutton> to continue"
+msgid "Press <emphasis>Next</emphasis> to continue"
 msgstr "Potom stiskněte <guibutton>Další</guibutton> pro pokračování"
 
 #. type: Content of: <section><info><title>
-#: en/login.xml:1
-msgid "Login screen"
+#: en/login.xml:4
+#, fuzzy
+msgid "Login Screen"
 msgstr "Přihlašovací obrazovka"
 
 #. type: Content of: <section><mediaobject>
-#: en/login.xml:1
+#: en/login.xml:7
+#, fuzzy
 msgid ""
-"<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-"
-"login.png\" align=\"center\" revision=\"1\"/></imageobject>"
+"<imageobject> <imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-"
+"login.png\" align=\"center\" revision=\"1\"/> </imageobject>"
 msgstr ""
 "<imageobject><imagedata format=\"PNG\" xml:id=\"login-im1\" fileref=\"live-"
 "login.png\" align=\"center\" revision=\"1\"/></imageobject>"
 
 #. type: Content of: <section><mediaobject><caption><para>
-#: en/login.xml:1
-msgid "KDM login screen"
+#: en/login.xml:11
+#, fuzzy
+msgid "SDDM login screen"
 msgstr "Přihlašovací obrazovka KDM"
 
 #. type: Content of: <section><para>
-#: en/login.xml:1
-msgid "Finally, you will come to the login screen."
+#: en/login.xml:14
+#, fuzzy
+msgid "Finally, you will come to the desktop login screen."
 msgstr "Nakonec se dostanete k přihlašovací obrazovce"
 
 #. type: Content of: <section><para>
-#: en/login.xml:1
+#: en/login.xml:15
+#, fuzzy
 msgid ""
 "Enter your user name and user password, and in a few seconds you will find "
-"yourself with a loaded KDE or GNOME desktop, depending on which live medium "
-"you used. You can now start using your Mageia installation."
+"yourself with a loaded KDE Plasma or GNOME desktop, depending on which live "
+"medium you used. You can now start using and enjoying your Mageia "
+"installation."
 msgstr ""
 "Vložte své uživatelské jméno a uživatelské heslo a za pár sekund se, podle "
 "toho který živý datový nosič jste použili, ocitnete v nahraném prostředí KDE "
 "nebo GNOME. Nyní můžete začít používat vaši instalaci Mageii."
 
 #. type: Content of: <section><para>
-#: en/login.xml:3
+#: en/login.xml:16
+#, fuzzy
 msgid ""
-"You can find another part of our documentation in <link linkend=\"https://"
-"wiki.mageia.org/en/Category:Documentation\">the Mageia wiki</link>."
+"You can find further documentation in <link xmlns:ns0=\"http://www.w3."
+"org/1999/xlink\" ns0:href=\"../../installer/\">the Mageia wiki</link>."
 msgstr ""
 "Další část naší dokumentace můžete najít na <link linkend=\"https://wiki."
 "mageia.org/en/Category:Documentation\">Mageia wiki</link>."
 
 #. type: Content of: <section><info><title>
-#: en/media_selection.xml:3
-msgid "Media Selection (Nonfree)"
-msgstr "Výběr zdrojů (Nonfree)"
+#: en/media_selection.xml:10
+msgid "Nonfree Media"
+msgstr ""
 
 #.  papoteur 2013-04-11  - created 
 #.  marja 2013-04-16 added screenshot + made title longer (because it was the same as for add_supplemental_media)
 #.  marja 2013-04-16 s/in/during/ as suggested by Tristan Campbell 
 #. marja 2013-04-17 s/xml:id="media-selection"/xml:id="media_selection"/ (html filename was wrong)
+#. 2019.01.05 apb: Changed Ati to AMD in Nonfree para.
 #. type: Content of: <section><mediaobject>
-#: en/media_selection.xml:15
-#, fuzzy
+#: en/media_selection.xml:24
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"media_selection-im1\" align="
-"\"center\" revision=\"1\" fileref=\"dx2-media_selection.png\"/> </"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
+"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
 "imageobject>"
 msgstr ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align="
-"\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection.png"
+"\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
+"imageobject>"
 
 #. type: Content of: <section><para>
-#: en/media_selection.xml:20
+#: en/media_selection.xml:30
 msgid ""
 "Here you have the list of available repositories. Not all repositories are "
 "available, according to which media you use for installing. The repositories "
@@ -2709,7 +2830,7 @@ msgstr ""
 "určuje, které balíčky budou dostupné k vybrání během dalších kroků."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/media_selection.xml:27
+#: en/media_selection.xml:37
 msgid ""
 "The <emphasis>Core</emphasis> repository cannot be disabled as it contains "
 "the base of the distribution."
@@ -2718,12 +2839,13 @@ msgstr ""
 "základ distribuce."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/media_selection.xml:32
+#: en/media_selection.xml:42
+#, fuzzy
 msgid ""
 "The <emphasis>Nonfree</emphasis> repository includes packages that are free-"
 "of-charge, i.e. Mageia may redistribute them, but they contain closed-source "
 "software (hence the name - Nonfree). For example this repository includes "
-"nVidia and ATI graphics card proprietary drivers, firmware for various WiFi "
+"nVidia and AMD graphics card proprietary drivers, firmware for various WiFi "
 "cards, etc."
 msgstr ""
 "Repozitář pro <emphasis>Nonfree</emphasis> software obsahuje balíčky, které "
@@ -2734,7 +2856,7 @@ msgstr ""
 "WiFi atd."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/media_selection.xml:40
+#: en/media_selection.xml:50
 #, fuzzy
 msgid ""
 "The <emphasis>Tainted</emphasis> repository includes packages released under "
@@ -2756,69 +2878,71 @@ msgid "Minimal Install"
 msgstr "Minimální instalace"
 
 #. type: Content of: <section><para>
-#: en/minimal-install.xml:11
+#: en/minimal-install.xml:17
+#, fuzzy
+msgid ""
+"Minimal Installation is intended for those with specific uses in mind for "
+"Mageia, such as a server or a specialised workstation. You will probably use "
+"this option combined with the <emphasis>Individual package selection</"
+"emphasis> option to fine-tune your installation. See <xref linkend="
+"\"choosePackagesTree\"/>."
+msgstr ""
+"Minimální instalace je zamýšlena pro ty, kteří zamýšlejí zvláštní využití "
+"své <application>Mageii</application>, jakým je server nebo specializovaná "
+"pracovní stanice. Tuto volbu pravděpodobně použijete spojenu s možností "
+"\"výběru jednotlivých balíčků\" vzpomenutou výše, k doladění vaší instalace. "
+"Podívejte se na <xref linkend=\"choosePackagesTree\"></xref>."
+
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/minimal-install.xml:24
 #, fuzzy
 msgid ""
-"You can choose a Minimal Installation by de-selecting everything in the "
-"Package Group Selection screen, see <xref linkend=\"choosePackageGroups\"/>."
+"You can choose a <emphasis>Minimal Installation</emphasis> by de-selecting "
+"everything in the <emphasis>Package Group Selection</emphasis> screen, see "
+"<xref linkend=\"choosePackageGroups\"/>."
 msgstr ""
 "Můžete si zvolit Minimální instalaci odznačením všeho na obrazovce Výběru "
 "skupin balíčků. Podívejte se na <xref linkend=\"choosePackageGroups\"></"
 "xref>."
 
-#. type: Content of: <section><para>
-#: en/minimal-install.xml:14
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/minimal-install.xml:28
 #, fuzzy
 msgid ""
-"If desired, you can additionally tick the <emphasis role=\"bold\">Individual "
-"package selection</emphasis> option in the same screen."
+"If desired, you can additionally tick the <emphasis>Individual package "
+"selection</emphasis> option in the same screen."
 msgstr ""
 "Pokud je žádána, můžete na téže obrazovce dodatečně zaškrtnout volbu pro "
 "\"výběr jednotlivých balíčků\"."
 
-#. type: Content of: <section><para>
-#: en/minimal-install.xml:17
-#, fuzzy
-msgid ""
-"Minimal Installation is intended for those with specific uses in mind for "
-"<application>Mageia</application>, such as a server or a specialised "
-"workstation. You will probably use this option combined with the <emphasis "
-"role=\"bold\">Individual package selection</emphasis> option mentioned "
-"above, to fine-tune your installation, see <xref linkend=\"choosePackagesTree"
-"\"/>."
-msgstr ""
-"Minimální instalace je zamýšlena pro ty, kteří zamýšlejí zvláštní využití "
-"své <application>Mageii</application>, jakým je server nebo specializovaná "
-"pracovní stanice. Tuto volbu pravděpodobně použijete spojenu s možností "
-"\"výběru jednotlivých balíčků\" vzpomenutou výše, k doladění vaší instalace. "
-"Podívejte se na <xref linkend=\"choosePackagesTree\"></xref>."
-
-#. type: Content of: <section><para>
-#: en/minimal-install.xml:22
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/minimal-install.xml:33
 #, fuzzy
 msgid ""
-"If you choose this installation method, then the relevant screen will offer "
-"you a few useful extras to install, such as documentation and X."
+"If you choose this installation method, then the relevant screen (see "
+"screenshot below) will offer you a few useful extras to install, such as "
+"documentation and <quote>X</quote>."
 msgstr ""
 "Pokud jste si zvolili tuto instalační třídu, potom vám příslušná obrazovka "
 "nabídne několik užitečných věcí navíc k nainstalování, jakými jsou "
 "dokumentace a X server."
 
-#. type: Content of: <section><para>
-#: en/minimal-install.xml:26
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/minimal-install.xml:37
 msgid ""
-"If <emphasis role=\"bold\">With X</emphasis> is chosen, then IceWM (a "
+"If the <emphasis>With X</emphasis> option is selected, then IceWM (a "
 "lightweight desktop environment) will also be included."
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/minimal-install.xml:29
+#: en/minimal-install.xml:42
+#, fuzzy
 msgid ""
-"The basic documentation is provided in the form of man and info pages.  It "
-"contains the man pages from the <link xlink:href=\"http://www.tldp.org/"
-"manpages/man.html\">Linux Documentation Project</link> and the <link xlink:"
-"href=\"http://www.gnu.org/software/coreutils/manual/\">GNU coreutils</link> "
-"info pages."
+"The basic documentation is provided in the form of <quote>man</quote> and "
+"<quote>info</quote> pages. It contains the man pages from the <link xlink:"
+"href=\"http://www.tldp.org/manpages/man.html\">Linux Documentation Project</"
+"link> and the <link xlink:href=\"http://www.gnu.org/software/coreutils/"
+"manual/\">GNU coreutils</link> info pages."
 msgstr ""
 "Základní dokumentace je poskytnuta v podobě manuálových a informačních "
 "stránek. Obsahuje manuálové stránky z <link xlink:href=\"http://www.tldp.org/"
@@ -2827,7 +2951,7 @@ msgstr ""
 "\">jádrových programech GNU</link>."
 
 #. type: Content of: <section><mediaobject>
-#: en/minimal-install.xml:35
+#: en/minimal-install.xml:48
 #, fuzzy
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" xml:id=\"minimal-install-im1\" align="
@@ -2839,25 +2963,33 @@ msgstr ""
 
 #. type: Content of: <section><info><title>
 #: en/misc-params.xml:3
-msgid "Summary of miscellaneous parameters"
-msgstr "Souhrn různých parametrů"
+#, fuzzy
+msgid "Configuration Summary"
+msgstr "Nastavení zvuku"
 
 #.  Lebarhon 2016 12 16 updated for Mageia 6. 20170209 updated SC
+#. 2018/02/09 apb: Changed title to Configuration Summary (as agreed). Also, text and typography.
+#. 2018/02/22 apb: Changed list styles.
+#. 2018/02/23 apb: Updated dx2-summaryBottom.png
+#. 2018/02/24 apb: Changed list style
+#. 2018/02/24 apb: Centre-align dx2-summaryTop.png
 #. type: Content of: <section><mediaobject>
-#: en/misc-params.xml:10
+#: en/misc-params.xml:19
+#, fuzzy
 msgid ""
-"<imageobject> <imagedata fileref=\"dx2-summaryTop.png\"/> </imageobject>"
+"<imageobject> <imagedata fileref=\"dx2-summaryTop.png\" align=\"center\"/> </"
+"imageobject>"
 msgstr ""
 "<imageobject> <imagedata fileref=\"dx2-summaryTop.png\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/misc-params.xml:15
+#: en/misc-params.xml:24
 #, fuzzy
 msgid ""
 "DrakX presents a proposal for the configuration of your system depending on "
 "the choices you made and on the hardware detected. You can check the "
-"settings here and change them if you want by pressing <guibutton>Configure</"
-"guibutton>."
+"settings here and change them if you want by pressing <emphasis>Configure</"
+"emphasis>."
 msgstr ""
 "DrakX udělal chytré volby pro nastavení vašeho systému závisící na volbách, "
 "které jste udělal a na vybavení počítače, které DrakX zjistil. Nastavení "
@@ -2865,43 +2997,43 @@ msgstr ""
 "<guibutton>Nastavit</guibutton>."
 
 #. type: Content of: <section><note><para>
-#: en/misc-params.xml:21
+#: en/misc-params.xml:30
 msgid ""
 "As a general rule, it is recommended that you accept the default settings "
 "unless:"
 msgstr ""
 
 #. type: Content of: <section><note><para><itemizedlist><listitem><para>
-#: en/misc-params.xml:24
+#: en/misc-params.xml:33
 msgid "there are known issues with a default setting"
 msgstr "existují známé problémy s výchozím nastavením"
 
 #. type: Content of: <section><note><para><itemizedlist><listitem><para>
-#: en/misc-params.xml:28
+#: en/misc-params.xml:37
 msgid "the default setting has already been tried and it fails"
 msgstr "výchozí nastavení bylo vyzkoušeno, ale selhalo"
 
 #. type: Content of: <section><note><para><itemizedlist><listitem><para>
-#: en/misc-params.xml:32
-msgid ""
-"some other factor mentionned in the detailed sections below is an issue."
+#: en/misc-params.xml:41
+msgid "some other factor mentioned in the detailed sections below is an issue"
 msgstr ""
 
 #. type: Content of: <section><section><info><title>
-#: en/misc-params.xml:40
+#: en/misc-params.xml:49
 msgid "System parameters"
 msgstr "Systémové parametry"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:45
-msgid "<guilabel>Timezone</guilabel>"
-msgstr "<guilabel>Časové pásmo</guilabel>"
+#: en/misc-params.xml:54
+#, fuzzy
+msgid "<emphasis role=\"bold\">Timezone</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:47
+#: en/misc-params.xml:56
 #, fuzzy
 msgid ""
-"DrakX selects a time zone for you, depending on your preferred language. You "
+"DrakX selects a timezone for you, depending on your preferred language. You "
 "can change it if needed. See also <xref linkend=\"configureTimezoneUTC\"/>"
 msgstr ""
 "DrakX pro vás vybral časové pásmo, vzhledem k vašemu oblíbenému jazyku. "
@@ -2909,12 +3041,13 @@ msgstr ""
 "\"configureTimezoneUTC\"/>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:53
-msgid "<guilabel>Country / Region</guilabel>"
-msgstr "<guilabel>Země/Oblast</guilabel>"
+#: en/misc-params.xml:62
+#, fuzzy
+msgid "<emphasis role=\"bold\">Country / Region</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:56
+#: en/misc-params.xml:64
 #, fuzzy
 msgid ""
 "If the selected country is wrong, it is very important that you correct the "
@@ -2924,47 +3057,49 @@ msgstr ""
 "nastavení. Podívejte se na <xref linkend=\"selectCountry\"/>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:62
-msgid "<guilabel>Bootloader</guilabel>"
-msgstr "<guilabel>Zavaděč</guilabel>"
+#: en/misc-params.xml:70
+#, fuzzy
+msgid "<emphasis role=\"bold\">Bootloader</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:64
-msgid "DrakX has made good choices for the bootloader setting."
+#: en/misc-params.xml:72
+#, fuzzy
+msgid "DrakX proposal for the bootloader setting"
 msgstr "DrakX udělal dobré výběry pro nastavení zavaděče systému."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:67
+#: en/misc-params.xml:75
 #, fuzzy
-msgid "Do not change anything, unless you know how to configure GRUB2"
+msgid ""
+"Do not change anything, unless you know how to configure GRUB2. For more "
+"information, see <xref linkend=\"setupBootloader\"/>"
 msgstr "Pokud nevíte jak nastavit Grub2, nic neměňte"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:70
-msgid "For more information, see <xref linkend=\"setupBootloader\"/>"
-msgstr "Pro více informací se podívejte na <xref linkend=\"setupBootloader\"/>"
-
-#. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:75
-msgid "<guilabel>User management</guilabel>"
-msgstr "<guilabel>Správa uživatelů</guilabel>"
+#: en/misc-params.xml:83
+#, fuzzy
+msgid "<emphasis role=\"bold\">User management</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:78
+#: en/misc-params.xml:85
+#, fuzzy
 msgid ""
-"You can add extra users here. They will each get their own <literal>/home</"
-"literal> directories."
+"You can add extra users here. They will each be allocated their own "
+"<filename>/home</filename> directories."
 msgstr ""
 "Zde můžete přidat další uživatele. Každý z nich obdrží svůj vlastní "
 "<literal>/home</literal> t. j. domácí adresáře."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:84
-msgid "<guilabel>Services</guilabel>:"
-msgstr "<guilabel>Služby</guilabel>:"
+#: en/misc-params.xml:91
+#, fuzzy
+msgid "<emphasis role=\"bold\">Services</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:86
+#: en/misc-params.xml:93
 #, fuzzy
 msgid ""
 "System services refer to those small programs which run in the background "
@@ -2975,32 +3110,29 @@ msgstr ""
 "umožňuje povolit nebo zakázat určité úlohy."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:90
+#: en/misc-params.xml:97
+#, fuzzy
 msgid ""
 "You should check carefully before changing anything here - a mistake may "
-"prevent your computer from operating correctly."
+"prevent your computer from operating correctly. For more information, see "
+"<xref linkend=\"configureServices\"/>"
 msgstr ""
 "Zde byste měli zaškrtávat opatrně, dříve než tu cokoli změníte - omyl může "
 "zabránit správnému běhu vašeho počítače."
 
-#. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:94
-msgid "For more information, see <xref linkend=\"configureServices\"/>"
-msgstr ""
-"Pro více informací se podívejte na <xref linkend=\"configureServices\"/>"
-
 #. type: Content of: <section><section><info><title>
-#: en/misc-params.xml:101
+#: en/misc-params.xml:106
 msgid "Hardware parameters"
 msgstr "Hardwarové parametry"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:106
-msgid "<guilabel>Keyboard</guilabel>:"
-msgstr "<guilabel>Klávesnice</guilabel>:"
+#: en/misc-params.xml:111
+#, fuzzy
+msgid "<emphasis role=\"bold\">Keyboard</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:108
+#: en/misc-params.xml:113
 #, fuzzy
 msgid ""
 "Configure your keyboard layout according to your location, language and type "
@@ -3010,19 +3142,20 @@ msgstr ""
 "vaší poloze, jazyku nebo typu klávesnice."
 
 #. type: Content of: <section><section><itemizedlist><listitem><note><para>
-#: en/misc-params.xml:113
+#: en/misc-params.xml:118
 msgid ""
 "If you notice a wrong keyboard layout and want to change it, keep in mind "
 "that your passwords are going to change too."
 msgstr ""
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:119
-msgid "<guilabel>Mouse</guilabel>:"
-msgstr "<guilabel>Myš</guilabel>:"
+#: en/misc-params.xml:124
+#, fuzzy
+msgid "<emphasis role=\"bold\">Mouse</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:121
+#: en/misc-params.xml:126
 msgid ""
 "Here you can add or configure other pointing devices, tablets, trackballs "
 "etc."
@@ -3031,42 +3164,43 @@ msgstr ""
 "kulové ovladače atd."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:126
-msgid "<guilabel>Sound card</guilabel>:"
-msgstr "<guilabel>Zvuková karta</guilabel>:"
+#: en/misc-params.xml:131
+#, fuzzy
+msgid "<emphasis role=\"bold\">Sound card</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:129
-#, fuzzy
+#: en/misc-params.xml:133
+msgid "The installer will use the default driver if one is available."
+msgstr ""
+
+#. type: Content of: <section><section><para>
+#: en/misc-params.xml:136 en/soundConfig.xml:46
 msgid ""
-"The installer uses the default driver - if there is a default one. The "
-"option to select a different driver is only given when there is more than "
-"one driver for your card, but where none of them is the default one."
+"If there is no actual default driver for your sound card, there may be other "
+"possible alternative drivers available to choose from. If this is the case, "
+"but you think the installer has not made the most appropriate choice, you "
+"can click on <emphasis>Advanced</emphasis> to manually specify a driver."
 msgstr ""
-"Instalátor používá výchozí ovladač, pokud nějaký výchozí existuje. Možnost "
-"výběru odlišného ovladače je dána jen tehdy, když je více než jeden ovladač "
-"pro vaši kartu, ale žádný z nich není výchozí."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:137
-msgid "<guilabel>Graphical interface</guilabel>:"
-msgstr "<guilabel>Grafické rozhraní</guilabel>:"
+#: en/misc-params.xml:144
+#, fuzzy
+msgid "<emphasis role=\"bold\">Graphical interface</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:140
-msgid "This section allows you to configure your graphic card(s) and displays."
+#: en/misc-params.xml:146
+#, fuzzy
+msgid ""
+"This section allows you to configure your graphics card(s) and displays. For "
+"more information, see <xref linkend=\"configureX_chooser\"/>"
 msgstr ""
 "Tento oddíl vám dovoluje nastavit vaši grafickou kartu (resp. karty) a "
 "obrazovky."
 
-#. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:143
-msgid "For more information, see <xref linkend=\"configureX_chooser\"/>."
-msgstr ""
-"Pro více informací se podívejte na <xref linkend=\"configureX_chooser\"/>."
-
 #. type: Content of: <section><section><mediaobject>
-#: en/misc-params.xml:149
+#: en/misc-params.xml:155
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" align="
 "\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>"
@@ -3075,22 +3209,23 @@ msgstr ""
 "\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </imageobject>"
 
 #. type: Content of: <section><section><info><title>
-#: en/misc-params.xml:157
+#: en/misc-params.xml:163
 msgid "Network and Internet parameters"
 msgstr "Parametry sítě a internetu"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:163
-msgid "<guilabel>Network</guilabel>:"
-msgstr "<guilabel>Síť</guilabel>:"
+#: en/misc-params.xml:169
+#, fuzzy
+msgid "<emphasis role=\"bold\">Network</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:165
+#: en/misc-params.xml:171
 #, fuzzy
 msgid ""
 "You can configure your network here, but for network cards with non-free "
-"drivers it is better to do that after reboot, using the <application>Mageia "
-"Control Center</application>, if you have not yet enabled the Nonfree media "
+"drivers it is better to do that after reboot, using the Mageia Control "
+"Center, if you have not yet enabled the <emphasis>Nonfree</emphasis> media "
 "repositories."
 msgstr ""
 "Zde můžete nastavit vaši síť, ale pro síťové karty s nesvobodnými ovladači "
@@ -3099,7 +3234,7 @@ msgstr ""
 "(Nonfree)."
 
 #. type: Content of: <section><section><itemizedlist><listitem><warning><para>
-#: en/misc-params.xml:172
+#: en/misc-params.xml:178
 #, fuzzy
 msgid ""
 "When you add a network card, do not forget to set your firewall to monitor "
@@ -3109,15 +3244,17 @@ msgstr ""
 "sledování onoho rozhraní."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:179
-msgid "<guilabel>Proxies</guilabel>:"
-msgstr "<guilabel>Proxy</guilabel>:"
+#: en/misc-params.xml:185
+#, fuzzy
+msgid "<emphasis role=\"bold\">Proxies</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:181
+#: en/misc-params.xml:187
+#, fuzzy
 msgid ""
 "A Proxy Server acts as an intermediary between your computer and the wider "
-"internet.  This section allows you to configure your computer to utilize a "
+"Internet.  This section allows you to configure your computer to utilize a "
 "proxy service."
 msgstr ""
 "Proxy Server slouží jako zprostředkovatel mezi vaším počítačem a širším "
@@ -3125,68 +3262,74 @@ msgstr ""
 "některé proxy služby."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:186
+#: en/misc-params.xml:192
 #, fuzzy
 msgid ""
-"You may need to consult your systems administrator to get the parameters you "
-"need to enter here."
+"You may need to consult your systems administrator to obtain the parameters "
+"you need to enter here."
 msgstr ""
 "Možná se budete potřebovat poradit s vaším systémovým správcem pro získání "
 "parametrů, které sem potřebujete zadat"
 
 #. type: Content of: <section><section><info><title>
-#: en/misc-params.xml:195
+#: en/misc-params.xml:201
 msgid "Security"
 msgstr "Bezpečnost"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:200
-msgid "<guilabel>Security Level</guilabel>:"
-msgstr "<guilabel>Úroveň bezpečnosti</guilabel>:"
+#: en/misc-params.xml:206
+#, fuzzy
+msgid "<emphasis role=\"bold\">Security Level</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:203
+#: en/misc-params.xml:208
+#, fuzzy
 msgid ""
-"Here you set the Security level for your computer, in most cases the default "
-"setting (Standard) is adequate for general use."
+"The Security level for your computer, in most cases the default setting "
+"(Standard)  is adequate for general use. Select the option which best suits "
+"your usage."
 msgstr ""
 "Zde nastavujete Úroveň bezpečnosti pro váš počítač, ve většině případů je "
 "výchozí nastavení (standardní) pro běžné použití přiměřené."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:207
-msgid "Check the option which best suits your usage."
-msgstr "Zaškrtněte volbu, která se nejlépe hodí k vašemu používání."
+#: en/misc-params.xml:215
+#, fuzzy
+msgid "<emphasis role=\"bold\">Firewall</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:212
-msgid "<guilabel>Firewall</guilabel>:"
-msgstr "<guilabel>Firewall</guilabel>:"
+#: en/misc-params.xml:217
+msgid ""
+"The firewall allows you to manage which network connections are allowed on "
+"your computer. The safe and secure default is to allow ZERO inbound "
+"connections. This does not stop you connecting outbound and using your "
+"computer normally."
+msgstr ""
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:214
+#: en/misc-params.xml:223
 msgid ""
-"A firewall is intended to be a barrier between your important data and the "
-"rascals out there on the internet who would compromise or steal it."
+"Please be aware that the Internet is a high risk network where there are "
+"continuous attempts to probe and attack systems. Even seemingly <quote>safe</"
+"quote> connections such as ICMP (for ping) have been used as covert data "
+"channels for exfiltrating data by malicious persons."
 msgstr ""
-"Firewall, moravsky ohnivá zeď, má sloužit jako překážka mezi vašimi "
-"důležitými daty a ničemy venku na internetu, kteří by je chtěli vyzradit "
-"nebo ukradnout."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/misc-params.xml:218
-msgid ""
-"Select the services that you wish to have access to your system. Your "
-"selections will depend on what you use your computer for. For more "
-"information, see <xref linkend=\"firewall\"/>."
+#: en/misc-params.xml:229
+#, fuzzy
+msgid "For more information, see <xref linkend=\"firewall\"/>."
 msgstr ""
-"Vyberte si služby, které si přejete, aby měly přístup k vašemu systému. Vaše "
-"výběry budou záležet na tom, k čemu používáte váš počítač. Další informace "
-"najdete na <xref linkend=\"firewall\"/>."
+"Pro více informací se podívejte na <xref linkend=\"configureX_chooser\"/>."
 
 #. type: Content of: <section><section><itemizedlist><listitem><warning><para>
-#: en/misc-params.xml:224
-msgid "Bear in mind that allowing everything (no firewall) may be very risky."
+#: en/misc-params.xml:232
+#, fuzzy
+msgid ""
+"Bear in mind that allowing <emphasis>everything</emphasis> (no firewall) may "
+"be very risky."
 msgstr ""
 "Mějte na paměti, že dovolení všeho (žádný firewall) může být velmi riskantní."
 
@@ -3196,35 +3339,50 @@ msgid "Reboot"
 msgstr "Restartovat"
 
 #. type: Content of: <section><para>
-#: en/reboot.xml:6
+#: en/reboot.xml:7
+#, fuzzy
 msgid ""
 "Once the bootloader has been installed, you will be prompted to halt your "
-"computer, remove the live CD and restart the computer, click on <emphasis "
-"role=\"bold\"><guibutton>Finish</guibutton></emphasis> and act as "
-"asked<emphasis role=\"bold\"> in this order!</emphasis>"
+"computer, remove the live DVD/USB stick and restart the computer."
 msgstr ""
 "Když byl zavaděč nainstalován, budete vyzváni k pozastavení vašeho počítače, "
 "odstranění živého CD a restartování počítače. Klepněte na <emphasis role="
 "\"bold\"><guibutton>Dokončit</guibutton></emphasis> a jednejte podle "
 "požadavků<emphasis role=\"bold\">, v tomto pořadí!</emphasis>"
 
+#. type: Content of: <section><important><simpara>
+#: en/reboot.xml:9
+msgid ""
+"Ensure that you follow these shut-down and restart instruction steps in the "
+"<emphasis role=\"bold\">same</emphasis> order."
+msgstr ""
+
 #. type: Content of: <section><mediaobject>
-#: en/reboot.xml:11
-msgid "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>"
+#: en/reboot.xml:12
+#, fuzzy
+msgid ""
+"<imageobject> <imagedata align=\"center\" fileref=\"live-reboot2.png\"/> </"
+"imageobject>"
 msgstr "<imageobject> <imagedata fileref=\"live-reboot2.png\"/> </imageobject>"
 
-#. type: Content of: <section><para>
-#: en/reboot.xml:15
+#. type: Content of: <section><simpara>
+#: en/reboot.xml:16
+msgid "When you are ready, press <emphasis>Finish</emphasis>."
+msgstr ""
+
+#. type: Content of: <section><simpara>
+#: en/reboot.xml:17
+#, fuzzy
 msgid ""
 "When you restart, you will see a succession of download progress bars. These "
-"indicate that the software media lists are being downloaded (see Software "
-"management)."
+"indicate that the software media lists are being downloaded (see "
+"<emphasis>Software Management</emphasis>)."
 msgstr ""
 "Když restartujete, uvidíte následnost ukazovatelů postupu stahování. Tyto "
 "naznačují, že jsou stahovány seznamy nosičů software (viz Správa software)."
 
 #. type: Content of: <section><mediaobject>
-#: en/reboot.xml:17
+#: en/reboot.xml:19
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-"
 "reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"
@@ -3253,46 +3411,52 @@ msgstr ""
 "instalaci <application>Mageii</application>."
 
 #. type: Content of: <section><info><title>
-#: en/securityLevel.xml:3
+#: en/securityLevel.xml:10
 msgid "Security Level"
 msgstr "Úroveň zabezpečení"
 
 #.  2012-12-25 marja - moved this part out of misc-params.xml" 
 #.  2013-05-05 marja - added screenshot 
+#. 2018/02/12 apb: Minor wording.
 #. type: Content of: <section><mediaobject>
-#: en/securityLevel.xml:11
+#: en/securityLevel.xml:20
 #, fuzzy
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"securityLevel-im1\" align="
-"\"center\" fileref=\"dx2-securityLevel.png\" revision=\"1\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-securityLevel.png\" "
+"format=\"PNG\" revision=\"1\" xml:id=\"securityLevel-im1\"/> </imageobject>"
 msgstr ""
-"<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align="
-"\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"live-bestTime.png\" "
+"format=\"PNG\" revision=\"1\" xml:id=\"bestTime-im1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/securityLevel.xml:16
+#: en/securityLevel.xml:26
 #, fuzzy
 msgid ""
 "<emphasis role=\"bold\">Please choose the desired security level</emphasis>"
 msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
 
 #. type: Content of: <section><para>
-#: en/securityLevel.xml:19
+#: en/securityLevel.xml:29
+msgid ""
+"<emphasis>Standard</emphasis> is the default, and recommended setting for "
+"the average user."
+msgstr ""
+
+#. type: Content of: <section><para>
+#: en/securityLevel.xml:32
 msgid ""
-"<emphasis role=\"bold\">Standard</emphasis> is the default, and recommended "
-"setting for the average user. The <emphasis role=\"bold\">Secure</emphasis> "
-"setting will create a highly protected system - for instance if the system "
-"is to be used as a public server."
+"<emphasis>Secure</emphasis> will create a highly protected system - for "
+"instance if the system is to be used as a public server."
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/securityLevel.xml:24
+#: en/securityLevel.xml:36
 #, fuzzy
 msgid "<emphasis role=\"bold\">Security Administrator</emphasis>"
 msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><para>
-#: en/securityLevel.xml:26
+#: en/securityLevel.xml:38
 msgid ""
 "This item allows you to configure an email address to which the system will "
 "send <emphasis>security alert messages</emphasis> when it detects situations "
@@ -3300,14 +3464,14 @@ msgid ""
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/securityLevel.xml:31
+#: en/securityLevel.xml:43
 msgid ""
-"A good, and easy-to-implement, choice is to enter &lt;user>@localhost - "
-"where &lt;user> is the login name of the user to receive these messages."
+"A good, and easy-to-implement, choice is to enter &lt;user&gt;@localhost - "
+"where &lt;user&gt; is the login name of the user to receive these messages."
 msgstr ""
 
 #. type: Content of: <section><note><para>
-#: en/securityLevel.xml:36
+#: en/securityLevel.xml:48
 msgid ""
 "The system sends such messages as <emphasis role=\"bold\">Unix Mailspool "
 "messages</emphasis>, not as \"ordinary\" SMTP mail: this user must therefore "
@@ -3315,27 +3479,27 @@ msgid ""
 msgstr ""
 
 #. type: Content of: <section><para>
-#: en/securityLevel.xml:41
+#: en/securityLevel.xml:53
 #, fuzzy
 msgid ""
-"After install, it will always be possible to adjust your security settings "
-"in the <guilabel>Security</guilabel> section of the Mageia Control Center."
+"It will always be possible to adjust your security settings post-install in "
+"the <emphasis>Security</emphasis> section of the Mageia Control Center."
 msgstr ""
 "I po instalaci bude vždy možné upravit vaše bezpečnostní nastavení v části "
 "<guilabel>Bezpečnost</guilabel> Ovládacího centra Mageii."
 
 #. type: Content of: <section><info><title>
-#: en/SelectAndUseISOs2.xml:6
+#: en/SelectAndUseISOs2.xml:15
 msgid "Select and use ISOs"
 msgstr "Vyberte a používejte ISO"
 
 #. type: Content of: <section><section><title>
-#: en/SelectAndUseISOs2.xml:9
+#: en/SelectAndUseISOs2.xml:18
 msgid "Introduction"
 msgstr "Úvod"
 
 #. type: Content of: <section><section><para>
-#: en/SelectAndUseISOs2.xml:10
+#: en/SelectAndUseISOs2.xml:19
 #, fuzzy
 msgid ""
 "Mageia is distributed via ISO images. This page will help you to choose "
@@ -3345,18 +3509,19 @@ msgstr ""
 "obraz vyhovuje vašim potřebám."
 
 #. type: Content of: <section><section><para>
-#: en/SelectAndUseISOs2.xml:12
+#: en/SelectAndUseISOs2.xml:21
 #, fuzzy
-msgid "There are two families of media:"
+msgid "There are three types of installation media:"
 msgstr "Jsou tu dvě rodiny nosičů:"
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:15
+#: en/SelectAndUseISOs2.xml:24
 #, fuzzy
 msgid ""
-"Classical installer: Booting with this media provides you with the maximum "
-"flexibility when choosing what to install, and for configuring your system. "
-"In particular, you have a choice of which Desktop environment to install"
+"<emphasis role=\"bold\">Classical installer:</emphasis> Booting with this "
+"media provides you with the maximum flexibility when choosing what to "
+"install, and for configuring your system. In particular, you have a choice "
+"of which Desktop environment to install."
 msgstr ""
 "Klasický instalátor: Po zavedení z nosiče bude následovat postup dovolující "
 "výběr toho, co chcete nainstalovat a jak nastavit váš cílový systém. Toto "
@@ -3365,43 +3530,91 @@ msgstr ""
 "nainstalujete."
 
 #. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:21
+#: en/SelectAndUseISOs2.xml:31
+msgid ""
+"<emphasis role=\"bold\">LIVE media:</emphasis> This option allows you to try "
+"out Mageia without having to actually install it, or make any changes to "
+"your computer. However, the Live media also includes an Installer, which can "
+"be started when booting the media, or after booting into the Live operating "
+"system itself."
+msgstr ""
+
+#. type: Content of: <section><section><itemizedlist><listitem><note><para>
+#: en/SelectAndUseISOs2.xml:37
 msgid ""
-"LIVE media: This option allows you to try out Mageia without having to "
-"actually install it, or make any changes to your computer.  If the "
-"installation is decided, the process is simpler, but you get fewer choices "
-"than offered by the Classical installer"
+"The Live Installer is simpler compared to the Classical Installer - but you "
+"have fewer configuration options."
 msgstr ""
 
+#. type: Content of: <section><section><itemizedlist><listitem><important><para>
+#: en/SelectAndUseISOs2.xml:41
+#, fuzzy
+msgid ""
+"Live ISOs can only be used to create <quote>clean</quote> installations, "
+"they cannot be used to upgrade previously installed Mageia releases."
+msgstr ""
+"<emphasis role=\"bold\">Živé soubory ISO mohou být použity jen na vytvoření "
+"čistých instalací, nemohou být použity na aktualizaci z předchozích vydání.</"
+"emphasis>"
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/SelectAndUseISOs2.xml:47
+#, fuzzy
+msgid ""
+"<emphasis role=\"bold\">Net Install</emphasis>: These are minimal ISO's "
+"containing no more than that which is needed to start the DrakX installer "
+"and find <literal>DrakX-installer-stage2</literal> and other packages that "
+"are needed to continue and complete the install. These packages may be on "
+"the PC hard disk, on a local drive, on a local network or on the Internet."
+msgstr ""
+"Každý z nich je malý obraz, který neobsahuje víc než to, co je třeba pro "
+"nastartování drakx instalátoru a nalezení drakx-instalátoru-části2 a dalších "
+"balíčků, které jsou potřebné pro pokračování a dokončení instalace. Tyto "
+"balíčky mohou být na pevném disku v PC, na místním disku, na místní síti "
+"anebo na internetu."
+
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/SelectAndUseISOs2.xml:53
+#, fuzzy
+msgid ""
+"These media are very light (less than 100 MB) and are convenient if "
+"bandwidth is too low to download a full DVD, or if you have a PC without a "
+"DVD drive or is unable to boot from a USB stick."
+msgstr ""
+"Tyto nosiče jsou velmi lehké (menší než 100 MB) a jsou vhodné, když je "
+"přenosové pásmo příliš malé na stáhnutí plného DVD, když PC nemá DVD "
+"mechaniku anebo když PC nedokáže nastartovat ze zařízení USB."
+
 #. type: Content of: <section><section><para>
-#: en/SelectAndUseISOs2.xml:27
-msgid "Details are given in the next sections."
+#: en/SelectAndUseISOs2.xml:58
+#, fuzzy
+msgid "More details are given in the next sections."
 msgstr "Podrobnosti jsou uvedeny v dalších částech."
 
 #. type: Content of: <section><section><title>
-#: en/SelectAndUseISOs2.xml:30
+#: en/SelectAndUseISOs2.xml:61
 msgid "Media"
 msgstr "Média"
 
 #. type: Content of: <section><section><section><title>
-#: en/SelectAndUseISOs2.xml:32
+#: en/SelectAndUseISOs2.xml:63
 msgid "Definition"
 msgstr "Definice"
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:33
+#: en/SelectAndUseISOs2.xml:64
 #, fuzzy
 msgid ""
 "Here, a medium (plural: media) is an ISO image file that allows you to "
-"install and/or update Mageia and by extension any physical support (DVD, USB "
-"stick, ...) the ISO file is copied to."
+"install and/or update Mageia and, by extension, any physical medium (DVD, "
+"USB stick, ...) the ISO file is copied to."
 msgstr ""
 "Zde je médiem (nosičem) obrazový soubor ISO, který vám umožňuje instalovat a/"
 "nebo aktualizovat Mageiu a při rozšíření jakoukoli fyzickou podporu, na "
 "kterou je soubor ISO zkopírován."
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:36
+#: en/SelectAndUseISOs2.xml:67
 #, fuzzy
 msgid ""
 "You can find Mageia ISO's <link ns4:href=\"http://www.mageia.org/en/"
@@ -3411,281 +3624,269 @@ msgstr ""
 "link>."
 
 #. type: Content of: <section><section><section><title>
-#: en/SelectAndUseISOs2.xml:39
+#: en/SelectAndUseISOs2.xml:70
 msgid "Classical installation media"
 msgstr "Klasické instalační nosiče"
 
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:41 en/SelectAndUseISOs2.xml:71
-#: en/SelectAndUseISOs2.xml:141
+#: en/SelectAndUseISOs2.xml:72 en/SelectAndUseISOs2.xml:104
+#: en/SelectAndUseISOs2.xml:171
 msgid "Common features"
 msgstr "Běžné vlastnosti"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:44
+#: en/SelectAndUseISOs2.xml:75
 #, fuzzy
-msgid "These ISOs use the Classical installer called drakx."
+msgid "These ISOs use the Classical installer called DrakX"
 msgstr "Tyto soubory ISO používají tradiční instalátor nazvaný drakx."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:47
+#: en/SelectAndUseISOs2.xml:78
 #, fuzzy
 msgid ""
 "They are used for performing clean installs or to upgrade a previously "
-"installed version of Mageia."
+"installed version of Mageia"
 msgstr "Dokáží udělat čistou instalaci nebo aktualizovat z předchozích vydání."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:51 en/SelectAndUseISOs2.xml:83
-#: en/SelectAndUseISOs2.xml:158
+#: en/SelectAndUseISOs2.xml:82 en/SelectAndUseISOs2.xml:118
+#: en/SelectAndUseISOs2.xml:174
 #, fuzzy
-msgid "Different media for 32 and 64 bit architectures."
+msgid "Different media for 32 and 64-bit architectures"
 msgstr "Různé nosiče pro 32 nebo 64 bitové architektury."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:54
+#: en/SelectAndUseISOs2.xml:85
+#, fuzzy
 msgid ""
-"Some tools are available in the Welcome screen: Rescue System, Memory Test, "
-"Hardware Detection Tool."
+"Some tools are available in the Installer <quote>Welcome</quote> screen: "
+"<emphasis>Rescue System, Memory Test, </emphasis>and <emphasis>Hardware "
+"Detection Tool</emphasis>"
 msgstr ""
 "Některé nástroje jsou dostupné na uvítací obrazovce: Záchranný systém, "
 "paměťový test, nástroj na zjištění hardware."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:58
-msgid "Each DVD contains many available desktop environments and languages."
+#: en/SelectAndUseISOs2.xml:91
+#, fuzzy
+msgid "Each DVD contains many available desktop environments and languages"
 msgstr "Každé DVD obsahuje mnohá dostupná prostředí pracovní plochy a jazyky."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:62
+#: en/SelectAndUseISOs2.xml:95
+#, fuzzy
 msgid ""
-"You'll be given the choice during the installation to add non free software."
+"You'll be given the choice during the installation to add non-free software"
 msgstr "Během instalace vám bude dána volba přidat si nesvobodný software."
 
 #. type: Content of: <section><section><section><title>
-#: en/SelectAndUseISOs2.xml:69
+#: en/SelectAndUseISOs2.xml:102
 msgid "Live media"
 msgstr "Živé nosiče"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:74
+#: en/SelectAndUseISOs2.xml:107
 #, fuzzy
 msgid ""
 "Can be used to preview the Mageia operating system without having to install "
-"it. Can also be used to install Mageia if you wish."
+"it"
 msgstr ""
 "Mohou být použity na obhlídku distribuce bez jejího nainstalování na pevný "
 "disk i na volitelné nainstalování Mageii na váš pevný disk."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:79
-msgid "Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)."
+#: en/SelectAndUseISOs2.xml:111
+msgid "The Live media also includes an Installer."
 msgstr ""
-"Každé ISO obsahuje pouze jedno grafické prostředí (KDE - Plasma, GNOME nebo "
-"Xfce)"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:86
+#: en/SelectAndUseISOs2.xml:114
 #, fuzzy
-msgid ""
-"<emphasis role=\"bold\">Live ISOs can only be used to create clean "
-"installations, they cannot be used to upgrade previously installed Mageia "
-"releases.</emphasis>"
+msgid "Each ISO contains only one desktop environment (Plasma, GNOME or Xfce)"
 msgstr ""
-"<emphasis role=\"bold\">Živé soubory ISO mohou být použity jen na vytvoření "
-"čistých instalací, nemohou být použity na aktualizaci z předchozích vydání.</"
-"emphasis>"
+"Každé ISO obsahuje pouze jedno grafické prostředí (KDE - Plasma, GNOME nebo "
+"Xfce)"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:91
-msgid "They contain non free software."
+#: en/SelectAndUseISOs2.xml:121
+#, fuzzy
+msgid "They contain non-free software"
 msgstr "Obsahují nesvobodný software."
 
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:96
+#: en/SelectAndUseISOs2.xml:126
 msgid "Live DVD Plasma"
 msgstr "Živé DVD Plasma"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:99
-msgid "Plasma desktop environment only."
+#: en/SelectAndUseISOs2.xml:129
+#, fuzzy
+msgid "Plasma desktop environment only"
 msgstr "Pouze KDE Plasma."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:102 en/SelectAndUseISOs2.xml:116
-#: en/SelectAndUseISOs2.xml:130
+#: en/SelectAndUseISOs2.xml:132 en/SelectAndUseISOs2.xml:146
+#: en/SelectAndUseISOs2.xml:160
 #, fuzzy
-msgid "All available languages are present."
+msgid "All available languages are present"
 msgstr "Všechny jazyky jsou přítomny."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:105
-msgid "64 bit architecture only."
-msgstr "Pouze 64 bitová architektura."
+#: en/SelectAndUseISOs2.xml:135 en/SelectAndUseISOs2.xml:149
+#, fuzzy
+msgid "64-bit architecture only"
+msgstr "Pouze 64 bitová architektura"
 
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:110
+#: en/SelectAndUseISOs2.xml:140
 msgid "Live DVD GNOME"
 msgstr "Live DVD GNOME"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:113
-msgid "GNOME desktop environment only."
+#: en/SelectAndUseISOs2.xml:143
+#, fuzzy
+msgid "GNOME desktop environment only"
 msgstr "Jen prostředí pracovní plochy GNOME."
 
-#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:119
-msgid "64 bit architecture only"
-msgstr "Pouze 64 bitová architektura"
-
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:124
+#: en/SelectAndUseISOs2.xml:154
 msgid "Live DVD Xfce"
 msgstr "Živé DVD Xfce"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:127
-msgid "Xfce desktop environment only."
+#: en/SelectAndUseISOs2.xml:157
+#, fuzzy
+msgid "Xfce desktop environment only"
 msgstr "Pouze Xfce."
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:133
-msgid "32 or 64 bit architectures."
+#: en/SelectAndUseISOs2.xml:163
+#, fuzzy
+msgid "32 or 64-bit architectures"
 msgstr "32 nebo 64 bitová architektura."
 
 #. type: Content of: <section><section><section><title>
-#: en/SelectAndUseISOs2.xml:139
+#: en/SelectAndUseISOs2.xml:169
 #, fuzzy
 msgid "Net install media"
 msgstr "netinstall.iso"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:144
-#, fuzzy
-msgid ""
-"These are minimal ISO's containing no more than that which is needed to "
-"start the drakx installer and find drakx-installer-stage2 and other packages "
-"that are needed to continue and complete the install. These packages may be "
-"on the PC hard disk, on a local drive, on a local network or on the Internet."
-msgstr ""
-"Každý z nich je malý obraz, který neobsahuje víc než to, co je třeba pro "
-"nastartování drakx instalátoru a nalezení drakx-instalátoru-části2 a dalších "
-"balíčků, které jsou potřebné pro pokračování a dokončení instalace. Tyto "
-"balíčky mohou být na pevném disku v PC, na místním disku, na místní síti "
-"anebo na internetu."
-
-#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:152
-#, fuzzy
-msgid ""
-"These media are very light (less than 100 MB) and are convenient if "
-"bandwidth is too low to download a full DVD, or if you have a PC without a "
-"DVD drive or is unable to boot from a USB stick."
-msgstr ""
-"Tyto nosiče jsou velmi lehké (menší než 100 MB) a jsou vhodné, když je "
-"přenosové pásmo příliš malé na stáhnutí plného DVD, když PC nemá DVD "
-"mechaniku anebo když PC nedokáže nastartovat ze zařízení USB."
-
-#. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:161
+#: en/SelectAndUseISOs2.xml:177
 #, fuzzy
-msgid "First steps are English language only."
+msgid "First steps are English language only"
 msgstr "Jen anglický jazyk."
 
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:166
+#: en/SelectAndUseISOs2.xml:182
 msgid "netinstall.iso"
 msgstr "netinstall.iso"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:169
+#: en/SelectAndUseISOs2.xml:185
+#, fuzzy
 msgid ""
-"Contains only free software, for those people who prefer not to use non-free "
-"software."
+"Contains only free software, for those who prefer to not use non-free "
+"software"
 msgstr ""
 "Obsahuje jen svobodný software, pro ty lidi, kteří upřednostňují nepoužívat "
 "nesvobodný software."
 
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:175
+#: en/SelectAndUseISOs2.xml:191
 msgid "netinstall-nonfree.iso"
 msgstr "netinstall-nonfree.iso"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:178
+#: en/SelectAndUseISOs2.xml:194
+#, fuzzy
 msgid ""
-"Contains non-free software (mostly drivers, codecs...) for people who need "
-"it."
+"Contains non-free software (mostly drivers, codecs...) for those who need it"
 msgstr ""
 "Obsahuje nesvobodný software (většinou ovladače, kodeky...) pro lidi, kteří "
 "jej potřebují."
 
 #. type: Content of: <section><section><title>
-#: en/SelectAndUseISOs2.xml:186
+#: en/SelectAndUseISOs2.xml:202
 msgid "Downloading and Checking Media"
 msgstr "Stahování a zkontrolování nosiče"
 
 #. type: Content of: <section><section><section><title>
-#: en/SelectAndUseISOs2.xml:188
+#: en/SelectAndUseISOs2.xml:204
 msgid "Downloading"
 msgstr "Stažení"
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:189
+#: en/SelectAndUseISOs2.xml:205
 #, fuzzy
 msgid ""
 "Once you have chosen your ISO file, you can download it using either http or "
 "BitTorrent. In both cases, you are provided with some information, such as "
-"the mirror in use and an option to switch if the bandwidth is too low. If "
-"http is chosen, you will also see something regarding checksums."
+"the mirror in use and an option to switch to an alternative if the bandwidth "
+"is too low."
 msgstr ""
 "Pokud jste si už vybrali váš soubor ISO, můžete ho stáhnout buď pomocí http "
 "nebo BitTorrentu. V obou případech vám okno podává pár informací, jako jsou "
 "použitý zrcadlový server a příležitost ke změně, pokud je přenosová rychlost "
 "příliš nízká. Pokud je vybráno http, můžete uvidět i něco takového"
 
-#. type: Content of: <section><section><section><mediaobject>
-#: en/SelectAndUseISOs2.xml:191
-msgid "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>"
-msgstr "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>"
+#. type: Content of: <section><section><section><para>
+#: en/SelectAndUseISOs2.xml:209
+msgid ""
+"If http is chosen you will also see some information regarding checksums."
+msgstr ""
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:195
+#: en/SelectAndUseISOs2.xml:212
+msgid ""
+"<literal>md5sum</literal>, <literal>sha1sum</literal> and "
+"<literal>sha512sum</literal> (the most secure) are tools to check the ISO "
+"integrity. Copy one of the checksums (string of alphanumeric characters) for "
+"use in the next section."
+msgstr ""
+
+#. type: Content of: <section><section><section><mediaobject>
+#: en/SelectAndUseISOs2.xml:217
 #, fuzzy
 msgid ""
-"md5sum and sha1sum are tools to check the ISO integrity. Choose one or the "
-"other, and copy the checksum <link linkend=\"integrity\">for later use</"
-"link>. Then a window similar to this one appears:"
+"<imageobject> <imagedata align=\"center\" fileref=\"Checking.png\"/> </"
+"imageobject>"
+msgstr "<imageobject> <imagedata fileref=\"Checking.png\"/> </imageobject>"
+
+#. type: Content of: <section><section><section><para>
+#: en/SelectAndUseISOs2.xml:222
+msgid "In the meantime, a window to download the actual ISO will open:"
 msgstr ""
-"md5sum a sha1sum jsou nástroje ke zkontrolování neporušenosti souboru ISO. "
-"Jeden z nich si ponechejte <link linkend=\"integrity\">pro budoucí použití</"
-"link>. Potom se objeví tomuto podobné okno:"
 
 #. type: Content of: <section><section><section><mediaobject>
-#: en/SelectAndUseISOs2.xml:199
-msgid "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"
+#: en/SelectAndUseISOs2.xml:225
+#, fuzzy
+msgid ""
+"<imageobject> <imagedata align=\"center\" fileref=\"Download.png\"/> </"
+"imageobject>"
 msgstr "<imageobject> <imagedata fileref=\"Download.png\"/> </imageobject>"
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:203
-msgid "Select the Save File option, then, click OK."
+#: en/SelectAndUseISOs2.xml:229
+msgid ""
+"Click on <emphasis>Save File</emphasis>, then click <emphasis>OK</emphasis>."
 msgstr ""
 
 #. type: Content of: <section><section><section><title>
-#: en/SelectAndUseISOs2.xml:206
+#: en/SelectAndUseISOs2.xml:233
 msgid "Checking the integrity of the downloaded media"
 msgstr "Ověřování neporušenosti stáhnutého nosiče"
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:208
+#: en/SelectAndUseISOs2.xml:235
 #, fuzzy
 msgid ""
 "The checksums referred to earlier, are digital fingerprints generated by an "
 "algorithm from the file to be downloaded. You may compare the checksum of "
 "your downloaded ISO against that of the original source ISO. If the "
 "checksums do not match, it means that the actual data on the ISO's do not "
-"match, and if it is the case, then you should retry the download or attempt "
-"a repair using BitTorrent."
+"match, and if that is the case, then you should retry the download or "
+"attempt a repair using BitTorrent."
 msgstr ""
 "Oba kontrolní součty jsou hexadecimální čísla vypočítaná algoritmem ze "
 "souboru, který má být stáhnut. Když tyto algoritmy požádáte o přepočítání "
@@ -3695,7 +3896,7 @@ msgstr ""
 "nebo pokusit o opravu pomocí BitTorrentu."
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:214
+#: en/SelectAndUseISOs2.xml:241
 #, fuzzy
 msgid ""
 "To generate the checksum for your downloaded ISO, open a console, (no need "
@@ -3703,76 +3904,87 @@ msgid ""
 msgstr "Otevřete konzoli, netřeba být superuživatelem (root), a:"
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:218
+#: en/SelectAndUseISOs2.xml:245
 #, fuzzy
 msgid ""
-"To use md5sum, type: <userinput>md5sum path/to/the/image/file.iso</"
-"userinput>."
+"To use the md5sum, type: <command>md5sum path/to/the/image/file.iso</command>"
 msgstr ""
 "- pro použití md5sum, napište: [sam@localhost]$ <userinput>md5sum cesta/k/"
 "obrazovému/souboru.iso</userinput>."
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:222
+#: en/SelectAndUseISOs2.xml:249
 #, fuzzy
 msgid ""
-"To use sha1sum, type: <userinput>sha1sum path/to/the/image/file.iso</"
-"userinput>"
+"To use the sha1sum, type: <command>sha1sum path/to/the/image/file.iso</"
+"command>"
+msgstr ""
+"- pro použití sha1sum, napište: [sam@localhost]$ <userinput>sha1sum cesta/k/"
+"obrazovému/souboru.iso</userinput>."
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/SelectAndUseISOs2.xml:254
+#, fuzzy
+msgid ""
+"To use the sha512sum, type: <command>sha512sum path/to/the/image/file.iso</"
+"command>"
 msgstr ""
 "- pro použití sha1sum, napište: [sam@localhost]$ <userinput>sha1sum cesta/k/"
 "obrazovému/souboru.iso</userinput>."
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:226
+#: en/SelectAndUseISOs2.xml:258
 msgid "Example:"
 msgstr ""
 
 #. type: Content of: <section><section><section><mediaobject>
-#: en/SelectAndUseISOs2.xml:228
-msgid "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>"
+#: en/SelectAndUseISOs2.xml:260
+#, fuzzy
+msgid ""
+"<imageobject> <imagedata align=\"center\" fileref=\"Md5sum.png\"/> </"
+"imageobject>"
 msgstr "<imageobject> <imagedata fileref=\"../Md5sum.png\"/> </imageobject>"
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:232
+#: en/SelectAndUseISOs2.xml:265
 #, fuzzy
 msgid ""
-"and compare the result (you may have to wait for a while) with the checksum "
-"provided by Mageia."
+"then compare the result (you may have to wait for a while) with the ISO "
+"checksum provided by Mageia."
 msgstr ""
 "a porovnejte získané číslo z vašeho počítače (možná na ně budete muset "
 "chvilku počkat) s číslem daným Mageiou. Například:"
 
 #. type: Content of: <section><section><title>
-#: en/SelectAndUseISOs2.xml:237
+#: en/SelectAndUseISOs2.xml:270
 msgid "Burn or dump the ISO"
 msgstr "Vypálení nebo vepsání souboru ISO"
 
 #. type: Content of: <section><section><para>
-#: en/SelectAndUseISOs2.xml:238
+#: en/SelectAndUseISOs2.xml:271
 #, fuzzy
 msgid ""
-"The verified ISO can now be burned to a CD/DVD or dumped to a USB stick. "
-"This is not a standard copy operation as a bootable medium will actually be "
-"created."
+"The verified ISO can now be burned to a CD/DVD or <quote>dumped</quote> to a "
+"USB stick. This is not a standard copy operation, as a bootable medium will "
+"actually be created."
 msgstr ""
 "Zkontrolované ISO může být nyní vypáleno na CD nebo DVD anebo vepsané "
 "(zapsané) na zařízení USB. Tyto operace nejsou obyčejným kopírováním a cílí "
 "k vytvoření zaveditelného nosiče."
 
 #. type: Content of: <section><section><section><title>
-#: en/SelectAndUseISOs2.xml:242
+#: en/SelectAndUseISOs2.xml:275
 msgid "Burning the ISO to a CD/DVD"
 msgstr "Vypálení souboru ISO na CD/DVD"
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:243
+#: en/SelectAndUseISOs2.xml:276
 #, fuzzy
 msgid ""
-"Whichever software you use, ensure that the option to burn an <emphasis role="
-"\"bold\">image</emphasis> is used, burn <emphasis role=\"bold\">data</"
-"emphasis> or <emphasis role=\"bold\">files</emphasis> is not correct. See "
-"<link ns4:href=\"https://wiki.mageia.org/en/Writing_CD_and_DVD_images\">the "
-"Mageia wiki</link> for more information."
+"Whichever software you use, ensure that the option to burn an<emphasis> "
+"image</emphasis> is used. Burn <emphasis>data</emphasis> or <emphasis>files</"
+"emphasis> is NOT correct. See the <link ns4:href=\"https://wiki.mageia.org/"
+"en/Writing_CD_and_DVD_images\">the Mageia wiki</link> for more information."
 msgstr ""
 "Použijte kterýkoli vypalovací program, který si přejete, ale ujistěte se, že "
 "vypalovací zařízení je správně nastaveno na <emphasis role=\"bold\">vypálit "
@@ -3781,48 +3993,55 @@ msgstr ""
 "Writing_CD_and_DVD_images\">Mageia wiki</link>."
 
 #. type: Content of: <section><section><section><title>
-#: en/SelectAndUseISOs2.xml:248
+#: en/SelectAndUseISOs2.xml:282
 msgid "Dump the ISO to a USB stick"
 msgstr "Zapsat ISO na USB flash"
 
 #. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:249
+#: en/SelectAndUseISOs2.xml:283
+#, fuzzy
 msgid ""
-"All Mageia ISOs are hybrids, which means you can 'dump' them to a USB stick "
-"and then use it to boot and install the system."
+"All Mageia ISOs are hybrids, which means you can dump them to a USB stick "
+"and then use that to boot and install the system."
 msgstr ""
 "Všechny soubory ISO Mageii jsou hybridy, což znamená, že je můžete "
 "'vepsat' (zapsat) na zařízení USB, a potom je použít na zavedení a instalaci "
 "systému."
 
 #. type: Content of: <section><section><section><warning><para>
-#: en/SelectAndUseISOs2.xml:252
+#: en/SelectAndUseISOs2.xml:286
 #, fuzzy
 msgid ""
-"\"Dumping\" an image onto a flash device destroys any previous file-system "
-"on the device; any existing data will be lost and the partition capacity "
-"will be reduced to the image size."
+"Dumping an image onto a flash device destroys any previous file-system on "
+"the device and all existing data will be lost."
 msgstr ""
 "\"vepsání\" (zapsání) obrazu na flashové zařízení zničí jakýkoli předešlý "
 "souborový systém na zařízení; všechna ostatní data budou ztracena a kapacita "
 "oddílu bude zmenšena na velikost obrazu."
 
-#. type: Content of: <section><section><section><para>
-#: en/SelectAndUseISOs2.xml:256
+#. type: Content of: <section><section><section><note><para>
+#: en/SelectAndUseISOs2.xml:290
 msgid ""
-"To recover the original capacity, you must redo partitioning and re-format "
-"the USB stick."
+"Also, the only partition on the flash device will then just be the Mageia "
+"ISO partition."
+msgstr ""
+
+#. type: Content of: <section><section><section><note><para>
+#: en/SelectAndUseISOs2.xml:292
+msgid ""
+"So, if an ISO of about 4GB is written to an 8GB USB stick, the stick will "
+"then only show up as 4GB. This is because the remaining 4GB is no longer "
+"formatted - hence not currently available for use. To recover the original "
+"capacity, you must reformat and repartition the USB stick."
 msgstr ""
-"Pro obnovu původní kapacity, musíte znovu předělat oddíl zařízení USB a "
-"naformátovat ho."
 
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:259
+#: en/SelectAndUseISOs2.xml:299
 msgid "Using a graphical tool within Mageia"
 msgstr "Použitím grafického nástroje v Mageii"
 
 #. type: Content of: <section><section><section><section><para>
-#: en/SelectAndUseISOs2.xml:260
+#: en/SelectAndUseISOs2.xml:300
 msgid ""
 "You can use a graphical tool like <link ns4:href=\"https://wiki.mageia.org/"
 "en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>"
@@ -3831,27 +4050,27 @@ msgstr ""
 "mageia.org/en/IsoDumper_Writing_ISO_images_on_USB_sticks\">IsoDumper</link>"
 
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:263
+#: en/SelectAndUseISOs2.xml:303
 msgid "Using a graphical tool within Windows"
 msgstr "Použitím grafického nástroje ve Windows"
 
 #. type: Content of: <section><section><section><section><para>
-#: en/SelectAndUseISOs2.xml:264
+#: en/SelectAndUseISOs2.xml:304
 msgid "You could try:"
 msgstr "Můžete vyzkoušet:"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:267
+#: en/SelectAndUseISOs2.xml:307
 #, fuzzy
 msgid ""
 "<link ns4:href=\"http://rufus.akeo.ie/?locale=en_US\">Rufus</link> using the "
-"\"ISO image\" option;"
+"\"ISO image\" option"
 msgstr ""
 "- <link ns4:href=\"http://rufus.akeo.ie/?locale=sk_SK\">Rufus</link> "
 "použitím volby \"obraz ISO\";"
 
 #. type: Content of: <section><section><section><section><itemizedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:271
+#: en/SelectAndUseISOs2.xml:311
 #, fuzzy
 msgid ""
 "<link ns4:href=\"http://sourceforge.net/projects/win32diskimager\">Win32 "
@@ -3861,12 +4080,13 @@ msgstr ""
 "Disk Imager</link>"
 
 #. type: Content of: <section><section><section><section><title>
-#: en/SelectAndUseISOs2.xml:277
-msgid "Using Command line within a GNU/Linux system"
+#: en/SelectAndUseISOs2.xml:317
+#, fuzzy
+msgid "Using the Command line within a GNU/Linux system"
 msgstr "Použitím příkazového řádku v systému GNU/Linux"
 
 #. type: Content of: <section><section><section><section><warning><para>
-#: en/SelectAndUseISOs2.xml:279
+#: en/SelectAndUseISOs2.xml:319
 #, fuzzy
 msgid ""
 "It is potentially *dangerous* to do this by hand. You risk overwriting "
@@ -3876,70 +4096,78 @@ msgstr ""
 "diskový oddíl, zadáte-li nesprávně ID zařízení."
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:285
+#: en/SelectAndUseISOs2.xml:325
 msgid "Open a console"
 msgstr "Otevřete konzoli"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:288
+#: en/SelectAndUseISOs2.xml:328
 #, fuzzy
 msgid ""
-"Become a root (Administrator) user with the command <userinput>su -</"
-"userinput> (don't forget the final '-' )"
+"Become a <emphasis>root</emphasis> (Administrator) user with the command "
+"<command>su -</command> (don't forget the <command>-</command> )"
 msgstr ""
 "Staňte se superuživatelem (rootem) použitím příkazu <userinput>su -</"
 "userinput> (nezapomeňte na koncovou pomlčku '-')"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
-#: en/SelectAndUseISOs2.xml:291
-msgid "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>"
+#: en/SelectAndUseISOs2.xml:332
+#, fuzzy
+msgid ""
+"<imageobject> <imagedata align=\"center\" fileref=\"Root.png\"/> </"
+"imageobject>"
 msgstr "<imageobject> <imagedata fileref=\"../Root.png\"/> </imageobject>"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:297
+#: en/SelectAndUseISOs2.xml:338
+#, fuzzy
 msgid ""
-"Plug in your USB stick (do not mount it, this also means do not open any "
-"application or file manager that could access or read it)"
+"Plug in your USB stick - but do not mount it (this also means do not open "
+"any application or file manager that could access or read it)"
 msgstr ""
 "Vsuňte vaše zařízení USB (nepřipojujte je příkazem mount, což znamená, "
 "neotevírejte žádný program nebo správce souborů, který by ho mohl "
 "zpřístupnit nebo z něho číst)"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:302
-msgid "Enter the command <userinput>fdisk -l</userinput>"
+#: en/SelectAndUseISOs2.xml:343
+#, fuzzy
+msgid "Enter the command <command>fdisk -l</command>"
 msgstr "Použijte příkaz <userinput>fdisk -l</userinput>"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><mediaobject>
-#: en/SelectAndUseISOs2.xml:304
-msgid "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>"
+#: en/SelectAndUseISOs2.xml:345
+#, fuzzy
+msgid ""
+"<imageobject> <imagedata align=\"center\" fileref=\"Fdisk.png\"/> </"
+"imageobject>"
 msgstr "<imageobject> <imagedata fileref=\"../Fdisk.png\"/> </imageobject>"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:310
+#: en/SelectAndUseISOs2.xml:351
 #, fuzzy
 msgid ""
-"Find the device name for your USB stick (by its size), for example <code>/"
-"dev/sdb</code> in the screenshot above, it is an 8GB USB stick."
+"Find the device name for your USB stick (by its size), for example "
+"<filename>/dev/sdb</filename> in the screenshot above, is an 8GB USB stick."
 msgstr ""
 "Najděte název zařízení pro vaše zařízení USB (podle jeho velikosti), "
 "například <code>/dev/sdb</code> na obrázku výše, je to zařízení 8GB USB."
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:312
+#: en/SelectAndUseISOs2.xml:354
 #, fuzzy
 msgid ""
-"Alternatively, you can find the device name with the command <code>dmesg</"
-"code>: towards the end of this example, you can see the device name starting "
-"with <emphasis>sd</emphasis>, and in this case, <emphasis>sdd</emphasis> is "
-"the actual device. You can also see that its size is 2GB:"
+"Alternatively, you can find the device name with the command <command>dmesg</"
+"command>. Towards the end of the following example, you can see the device "
+"name starting with <filename>sd</filename>, and in this case, <filename>sdd</"
+"filename> is the actual device. You can also see that its size is 2GB:"
 msgstr ""
 "Případně můžete získat název zařízení příkazem <code>dmesg</code>: na konci, "
 "vidíte název zařízení začínající na <emphasis>sd</emphasis>, a "
 "<emphasis>sdd</emphasis> v tomto případě:"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para><screen>
-#: en/SelectAndUseISOs2.xml:317
+#: en/SelectAndUseISOs2.xml:360
 #, no-wrap
 msgid ""
 "[72594.604531] usb 1-1: new high-speed USB device number 27 using xhci_hcd\n"
@@ -3981,53 +4209,57 @@ msgstr ""
 "[72595.969446] sd 8:0:0:0: [sdd] Attached SCSI removable disk"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:317
+#: en/SelectAndUseISOs2.xml:360
 #, fuzzy
 msgid "<placeholder type=\"screen\" id=\"0\"/>"
 msgstr "<placeholder type=\"mediaobject\" id=\"0\"/>"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:337
+#: en/SelectAndUseISOs2.xml:380
 #, fuzzy
 msgid ""
-"Enter the command: <emphasis role=\"bold\"># <userinput>dd if=path/to/the/"
-"ISO/file of=/dev/sdX bs=1M</userinput></emphasis>"
+"Enter the command: <command>dd if=path/to/the/ISO/file of=/dev/"
+"sd<replaceable>X</replaceable> bs=1M</command>"
 msgstr ""
 "Vložte příkaz: # <userinput>dd if=cesta/k/ISO/souboru of=/dev/sdX bs=1M</"
 "userinput>"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:340
+#: en/SelectAndUseISOs2.xml:382
 #, fuzzy
-msgid "Where X=your device name eg: /dev/sdd"
+msgid ""
+"Where <replaceable>X</replaceable>=your device name eg: <filename>/dev/sdd</"
+"filename>"
 msgstr "kde X=název vašeho zařízení, např. /dev/sdc"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:341
+#: en/SelectAndUseISOs2.xml:384
 #, fuzzy
 msgid ""
-"Example:<emphasis role=\"bold\"> # <userinput>dd if=/home/user/Downloads/"
-"Mageia-6-x86_64-DVD.iso of=/dev/sdd bs=1M</userinput></emphasis>"
+"Example:<literal> dd if=/home/user/Downloads/Mageia-6-x86_64-DVD.iso of=/dev/"
+"sdd bs=1M</literal>"
 msgstr ""
 "Příklad: # <userinput>dd if=/home/uživatel/Stahování/Mageia-6-x86_64-DVD.iso "
 "of=/dev/sdb bs=1M</userinput>"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><tip><para>
-#: en/SelectAndUseISOs2.xml:345
+#: en/SelectAndUseISOs2.xml:388
 msgid ""
-"It might helpful to know that <emphasis role=\"bold\">if</emphasis> stands "
-"for <emphasis role=\"bold\">i</emphasis>nput <emphasis role=\"bold\">f</"
-"emphasis>ile and <emphasis role=\"bold\">of</emphasis> stands for <emphasis "
-"role=\"bold\">o</emphasis>utput <emphasis role=\"bold\">f</emphasis>ile"
+"It might be helpful to know that <emphasis role=\"bold\">if</emphasis> "
+"stands for <emphasis role=\"bold\">i</emphasis>nput <emphasis role=\"bold"
+"\">f</emphasis>ile and <emphasis role=\"bold\">of</emphasis> stands for "
+"<emphasis role=\"bold\">o</emphasis>utput <emphasis role=\"bold\">f</"
+"emphasis>ile"
 msgstr ""
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:349
-msgid "Enter the command: # <userinput>sync</userinput>"
+#: en/SelectAndUseISOs2.xml:392
+#, fuzzy
+msgid "Enter the command: <command>sync</command>"
 msgstr "Vložte příkaz: # <userinput>sync</userinput>"
 
 #. type: Content of: <section><section><section><section><orderedlist><listitem><para>
-#: en/SelectAndUseISOs2.xml:352
+#: en/SelectAndUseISOs2.xml:395
 msgid "This is the end of the process, and you may now unplug your USB stick."
 msgstr ""
 
@@ -4037,8 +4269,10 @@ msgid "Select your Country / Region"
 msgstr "Vyberte zemi"
 
 #.  Lebarhon 2016 12 16 updated for Mageia 6
+#. 2018/02/13 apb: Minor wording + typography.
+#. 2018/02/25 apb: a) add xreflabel to this section. b) make some text bulleted.
 #. type: Content of: <section><mediaobject>
-#: en/selectCountry.xml:9
+#: en/selectCountry.xml:13
 msgid ""
 "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align="
 "\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>"
@@ -4046,35 +4280,35 @@ msgstr ""
 "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" align="
 "\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </imageobject>"
 
-#. type: Content of: <section><para>
-#: en/selectCountry.xml:14
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/selectCountry.xml:20
+#, fuzzy
 msgid ""
-"Select your country or region.  This is important for all kinds of settings, "
+"Select your country or region. This is important for all kinds of settings, "
 "like the currency and wireless regulatory domain. Setting the wrong country "
-"can lead to not being able to use a Wireless network."
+"can lead to being unable to use a Wireless network."
 msgstr ""
 "Vyberte vaši zemi nebo oblast. Toto je důležité pro všechny druhy nastavení, "
 "jako jsou měna a bezdrátová regulační doména. Nastavení nesprávné země může "
 "vést k neschopnosti používání bezdrátové sítě."
 
-#. type: Content of: <section><para>
-#: en/selectCountry.xml:19
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/selectCountry.xml:27
 #, fuzzy
 msgid ""
-"If your country isn't in the list, click the <guilabel>Other Countries</"
-"guilabel> option and choose your country / region there."
+"If your country isn't in the list, click the <emphasis>Other Countries</"
+"emphasis> option and choose your country / region there."
 msgstr ""
 "Pokud vaše země není v seznamu, klepněte na tlačítko <guilabel>Ostatní země</"
 "guilabel> a tam si vyberte vaši zemi/oblast."
 
 #. type: Content of: <section><note><para>
-#: en/selectCountry.xml:24
+#: en/selectCountry.xml:34
 #, fuzzy
 msgid ""
-"If your country is only in the <guilabel>Other Countries</guilabel> list, "
-"after clicking <guibutton>OK</guibutton> it may seem that a country from the "
-"first list was chosen. Please ignore this, as DrakX will apply your actual "
-"choice."
+"If your country is only in the <emphasis>Other Countries</emphasis> list, "
+"after clicking <emphasis>OK</emphasis> it may seem that a country from the "
+"main list was chosen. Despite this, DrakX will actually apply your choice."
 msgstr ""
 "Pokud je vaše země jen v seznamu <guilabel>ostatních zemí</guilabel>, po "
 "klepnutí na <guibutton>OK</guibutton> se může zdát, že země byla vybrána ze "
@@ -4082,15 +4316,15 @@ msgstr ""
 "volbu."
 
 #. type: Content of: <section><section><info><title>
-#: en/selectCountry.xml:33
+#: en/selectCountry.xml:42
 msgid "Input method"
 msgstr "Vstupní metoda"
 
 #. type: Content of: <section><section><para>
-#: en/selectCountry.xml:36
+#: en/selectCountry.xml:45
 #, fuzzy
 msgid ""
-"In the <guilabel>Other Countries</guilabel> screen you can also select an "
+"In the <emphasis>Other Countries</emphasis> screen you can also select an "
 "input method (at the bottom of the list). Input methods allow users to input "
 "multilingual characters (Chinese, Japanese, Korean, etc). IBus is the "
 "default input method, so users should not need to configure it manually. "
@@ -4108,13 +4342,13 @@ msgstr ""
 "balíčků."
 
 #. type: Content of: <section><section><note><para>
-#: en/selectCountry.xml:45
+#: en/selectCountry.xml:54
 #, fuzzy
 msgid ""
 "If you missed the input method setup during installation, you can access it "
-"after you boot your installed system via <emphasis role=\"bold\">Configure "
-"your Computer</emphasis> -> <emphasis role=\"bold\">System</emphasis>, or by "
-"running localedrake as root."
+"post-install via <menuchoice> <guimenu>Configure your Computer</guimenu> "
+"<guimenuitem>System</guimenuitem> </menuchoice>, or by running "
+"<command>localedrake</command> as <emphasis>root</emphasis>."
 msgstr ""
 "Pokud jste během instalace vynechali nastavení vstupní metody, můžete ji "
 "zpřístupnit po restartu vašeho nainstalovaného systému přes \"Nastavit váš "
@@ -4122,54 +4356,59 @@ msgstr ""
 "(správce root)."
 
 #. type: Content of: <section><info><title>
-#: en/selectInstallClass.xml:14
+#: en/selectInstallClass.xml:29
 msgid "Install or Upgrade"
 msgstr "Instalace nebo aktualizace"
 
 #. type: Content of: <section><mediaobject>
-#: en/selectInstallClass.xml:18
+#: en/selectInstallClass.xml:33
 #, fuzzy
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" align=\"center\" fileref=\"dx2-"
-"selectInstallClass.png\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectInstallClass."
+"png\" format=\"PNG\"/> </imageobject>"
 msgstr ""
 "<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
 "\" /> </imageobject>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectInstallClass.xml:25
-msgid "Install"
-msgstr "Instalace"
+#: en/selectInstallClass.xml:41
+#, fuzzy
+msgid "<emphasis role=\"bold\">Install</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectInstallClass.xml:27
+#: en/selectInstallClass.xml:43
 msgid ""
-"Use this option to perform a fresh installation of <application>Mageia</"
-"application>. This will format the root partition (/), but can preserve a "
-"separated /home partition."
+"Use this option to perform a fresh installation of Mageia. This will format "
+"the <literal>root</literal> partition (<filename>/</filename>), but can "
+"preserve a pre-existing <filename>/home</filename> partition (a dedicated /"
+"home partition, rather than being incorporated within the root (/) partition "
+"itself)."
 msgstr ""
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectInstallClass.xml:33
-msgid "Upgrade"
-msgstr "Aktualizace"
+#: en/selectInstallClass.xml:50
+#, fuzzy
+msgid "<emphasis role=\"bold\">Upgrade</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectInstallClass.xml:35
-msgid ""
-"This can be used to upgrade an existing installation of <application>Mageia</"
-"application>."
+#: en/selectInstallClass.xml:52
+#, fuzzy
+msgid "Use this option to upgrade an existing installation of Mageia."
 msgstr ""
+"Použijte tuto volbu pro čerstvou instalaci <application>Mageii</application>."
 
-#. type: Content of: <section><itemizedlist><listitem><warning><para>
-#: en/selectInstallClass.xml:39
+#. type: Content of: <section><important><para>
+#: en/selectInstallClass.xml:58
 #, fuzzy
 msgid ""
 "Only upgrading from a previous Mageia version that was <emphasis>still "
-"supported</emphasis> when this installer's version was released, has been "
+"supported</emphasis> when this Installer's version was released, has been "
 "thoroughly tested. If you want to upgrade a Mageia version that has reached "
-"its End Of Life, then it is better to do a clean install instead while "
-"preserving your <literal>/home</literal> partition."
+"its <quote>End Of Life</quote> then it is better to do a <quote>clean</"
+"quote> install instead, while preserving your <filename>/home</filename> "
+"partition."
 msgstr ""
 "Pouze aktualizování z předchozí verze Mageii, která byla <emphasis>ještě "
 "podporována</emphasis>, když byla vydána verze tohoto instalátoru, bylo "
@@ -4178,37 +4417,15 @@ msgstr ""
 "udělat čistou instalaci, přičemž si ponecháte váš domovský oddíl <literal>/"
 "home</literal>."
 
-#. type: Content of: <section><note><para>
-#: en/selectInstallClass.xml:50
-#, fuzzy
-msgid ""
-"If during install you decide to stop the installation, it is possible to "
-"reboot, but please think twice before you do this. Once a partition has been "
-"formatted or updates have started to be installed, your computer isn't in "
-"the same state anymore and rebooting it could very well leave you with an "
-"unusable system. If in spite of that, and only if you are very sure "
-"rebooting is what you want, go to a text terminal by pressing <guilabel>Alt "
-"Ctrl F2</guilabel> simultaneously. After that, press <guilabel>Alt Ctrl "
-"Delete</guilabel> simultaneously to reboot."
-msgstr ""
-"Pokud se během instalace rozhodnete instalaci zastavit, je možné restartovat "
-"počítač, ale dříve než toto uděláte, si to prosím důkladně zvažte. Když už "
-"byl oddíl jednou naformátován nebo se začaly instalovat aktualizace, váš "
-"počítač už nadále není ve stejném stavu a jeho restartování by vás mohlo "
-"velmi lehce zanechat s nepoužitelným systémem. Pokud si jste přesto přese "
-"všechno velmi jistí, že restartování je to, co chcete, jděte do textového "
-"terminálu současným stisknutím tří kláves <guilabel>Alt+Ctrl+F2</guilabel>. "
-"Potom současně stiskněte <guilabel>Alt+Ctrl+Delete</guilabel> pro restart."
-
 #. type: Content of: <section><tip><para>
-#: en/selectInstallClass.xml:62
+#: en/selectInstallClass.xml:67
 #, fuzzy
 msgid ""
 "If you have discovered that you forgot to select an additional language, you "
-"can return from the <emphasis role=\"bold\">Install or Upgrade</emphasis> "
-"screen to the language choice screen by pressing <guilabel>Alt Ctrl Home</"
-"guilabel> simultaneously. <emphasis role=\"bold\">Do not</emphasis> do this "
-"later in the install."
+"can return from the <emphasis>Install or Upgrade</emphasis> screen to the "
+"language choice screen by pressing <keycombo> <keycap>Ctrl</keycap> "
+"<keycap>Alt</keycap> <keycap>Home</keycap> </keycombo>. Do<emphasis role="
+"\"bold\"> NOT</emphasis> do this later in the install."
 msgstr ""
 "Pokud jste objevili, že jste zapomenuli vybrat nějaký doplňkový jazyk, "
 "můžete se vrátit z obrazovky \"Instalace a aktualizace\" k výběru jazyka "
@@ -4216,39 +4433,41 @@ msgstr ""
 "<emphasis>nedělejte</emphasis> později během instalace."
 
 #. type: Content of: <section><info><title>
-#: en/selectKeyboardLive.xml:3
-msgid "Select keyboard"
+#: en/selectKeyboardLive.xml:14
+#, fuzzy
+msgid "Select Keyboard"
 msgstr "Vyberte si klávesnici"
 
 #. type: Content of: <section><mediaobject>
-#: en/selectKeyboardLive.xml:7
+#: en/selectKeyboardLive.xml:18
+#, fuzzy
 msgid ""
-"<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" "
-"align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </"
+"<imageobject> <imagedata align=\"center\" fileref=\"live-selectKeyboard.png"
+"\" format=\"PNG\" revision=\"1\" xml:id=\"selectKeyboardLive-im1\"/> </"
 "imageobject>"
 msgstr ""
-"<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" "
-"align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </"
-"imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
+"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"
+
+#. type: Content of: <section><para>
+#: en/selectKeyboardLive.xml:24
+msgid "Here you can set the keyboard layout you wish to use with Mageia​​."
+msgstr ""
 
 #. type: Content of: <section><para>
-#: en/selectKeyboardLive.xml:12
+#: en/selectKeyboardLive.xml:27
 msgid ""
-"You will be required to set the keyboard layout you wish to use in Mageia​​. "
-"The default one is selected according to your language and timezone "
-"previously selected."
+"A suggested keyboard layout (highlighted), has been chosen for you based "
+"upon your previously selected language and timezone choices."
 msgstr ""
-"Budete si muset vybrat rozložení klávesnice, které si přejete používat v "
-"Mageii. Výchozí je vybrána přiměřeně k vašemu jazyku a předchozí vybrané "
-"časové oblasti."
 
 #. type: Content of: <section><info><title>
-#: en/selectKeyboard.xml:7
+#: en/selectKeyboard.xml:20
 msgid "Keyboard"
 msgstr "Klávesnice"
 
 #. type: Content of: <section><para>
-#: en/selectKeyboard.xml:10
+#: en/selectKeyboard.xml:23
 msgid ""
 "DrakX selects an appropriate keyboard for your language. If no suitable "
 "keyboard is found it will default to a US keyboard layout."
@@ -4257,17 +4476,17 @@ msgstr ""
 "vhodná klávesnice, bude jako výchozí použito rozložení klávesnice US."
 
 #. type: Content of: <section><mediaobject>
-#: en/selectKeyboard.xml:15
+#: en/selectKeyboard.xml:28
 #, fuzzy
 msgid ""
-"<imageobject> <imagedata fileref=\"dx2-selectKeyboard.png\" align=\"center\"/"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png\"/"
 "> </imageobject>"
 msgstr ""
-"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-chooseDesktop.png\" "
-"align=\"center\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
+"\" /> </imageobject>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectKeyboard.xml:22
+#: en/selectKeyboard.xml:35
 msgid ""
 "Make sure that the selection is correct or choose another keyboard layout. "
 "If you don't know which layout your keyboard has, look in the specifications "
@@ -4285,25 +4504,25 @@ msgstr ""
 "Rozložení_kláves</link>"
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectKeyboard.xml:31
+#: en/selectKeyboard.xml:45
 #, fuzzy
 msgid ""
-"If your keyboard isn't in the list shown, click on <guibutton>More</"
-"guibutton> to get a fuller list, and select your keyboard there."
+"If your keyboard isn't in the list shown, click on <emphasis>More</emphasis> "
+"to get a fuller list, and select your keyboard there."
 msgstr ""
 "Pokud vaše klávesnice není v zobrazeném seznamu, klepněte na "
 "<guibutton>Více</guibutton> pro získání úplného seznamu a vyberte klávesnici "
 "tam."
 
-#. type: Content of: <section><itemizedlist><listitem><para><warning><para>
-#: en/selectKeyboard.xml:36
+#. type: Content of: <section><itemizedlist><listitem><para><note><para>
+#: en/selectKeyboard.xml:50
 #, fuzzy
 msgid ""
-"After choosing a keyboard from the <guibutton>More</guibutton> dialog, "
-"you'll return to the first keyboard choice dialog and it will seem as though "
-"a keyboard from that screen was chosen. You can safely ignore this and "
-"continue the installation: the keyboard chosen from the full list will be "
-"applied."
+"After choosing a keyboard from the <emphasis>More</emphasis> dialogue, "
+"you'll return to the first keyboard choice dialogue and it will seem as "
+"though a keyboard from that screen was chosen. You can safely ignore this "
+"and continue the installation: the keyboard chosen from the full list will "
+"be applied."
 msgstr ""
 "Po vybrání klávesnice z dialogu <guibutton>Více</guibutton> se vrátíte k "
 "prvnímu dialogu pro výběr klávesnice a bude se zdát, jakoby byla zvolena "
@@ -4312,7 +4531,7 @@ msgstr ""
 "plného seznamu."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectKeyboard.xml:46
+#: en/selectKeyboard.xml:60
 #, fuzzy
 msgid ""
 "If you choose a keyboard based on non-Latin characters, you will see an "
@@ -4324,35 +4543,40 @@ msgstr ""
 "latinským a nelatinským rozložením klávesnice."
 
 #. type: Content of: <section><info><title>
-#: en/selectLanguage.xml:15
+#: en/selectLanguage.xml:34
 msgid "Please choose a language to use"
 msgstr "Zvolte si, prosím, jazyk, který chcete používat"
 
-#. type: Content of: <section><para>
-#: en/selectLanguage.xml:18
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/selectLanguage.xml:39
+#, fuzzy
 msgid ""
 "Select your preferred language, by first expanding the list for your "
-"continent. <application>Mageia</application> will use this selection during "
-"the installation and for your installed system."
+"continent. Mageia will use this selection during the installation and for "
+"your installed system."
 msgstr ""
 "Vyberte si váš oblíbený jazyk, tím že nejprve rozbalíte seznam pro váš "
 "světadíl. <application>Mageia</application> použije tento výběr během "
 "instalace a pro váš instalovaný systém."
 
-#. type: Content of: <section><para>
-#: en/selectLanguage.xml:23
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/selectLanguage.xml:45
+#, fuzzy
 msgid ""
-"Select your preferred language.  <application>Mageia</application> will use "
-"this selection during the installation and for your installed system."
+"Select your preferred language. Mageia will use this selection during the "
+"installation and for your installed system."
 msgstr ""
+"Vyberte si váš oblíbený jazyk, tím že nejprve rozbalíte seznam pro váš "
+"světadíl. <application>Mageia</application> použije tento výběr během "
+"instalace a pro váš instalovaný systém."
 
-#. type: Content of: <section><para>
-#: en/selectLanguage.xml:27
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/selectLanguage.xml:50
 #, fuzzy
 msgid ""
 "If it is likely that you (or others) will require several languages to be "
-"installed on your system, then you should use the <guibutton>Multiple "
-"languages</guibutton> option to add them now. It will be difficult to add "
+"installed on your system, then you should use the <emphasis>Multiple "
+"languages</emphasis> option to add them now. It will be difficult to add "
 "extra language support after installation."
 msgstr ""
 "Je možné, že budete potřebovat mít ve vašem systému nainstalováno více "
@@ -4361,67 +4585,68 @@ msgstr ""
 "náročné přidat další jazykovou podporu po instalaci."
 
 #. type: Content of: <section><mediaobject>
-#: en/selectLanguage.xml:33
+#: en/selectLanguage.xml:58
+#, fuzzy
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
-"\"dx2-selectLanguage.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </"
-"imageobject>"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-selectLanguage.png\" format=\"PNG\"/> </imageobject> <imageobject "
+"condition=\"live\"> <imagedata align=\"center\" fileref=\"live-language.png"
+"\" format=\"PNG\"/> </imageobject>"
 msgstr ""
 "<imageobject condition=\"classical\"> <imagedata format=\"PNG\" fileref="
 "\"dx2-selectLanguage.png\" align=\"center\"/> </imageobject> <imageobject "
 "condition=\"live\"> <imagedata fileref=\"live-language.png\" format=\"\"/> </"
 "imageobject>"
 
-#. type: Content of: <section><warning><para>
-#: en/selectLanguage.xml:43
+#. type: Content of: <section><important><para>
+#: en/selectLanguage.xml:68
 #, fuzzy
 msgid ""
 "Even if you choose more than one language, you must first choose one as your "
-"preferred language in the first language screen. It will also be marked as "
-"chosen in the multiple languages screen."
+"preferred language from the main list of languages. It will also be marked "
+"as chosen in the <emphasis>Multiple languages</emphasis> screen."
 msgstr ""
 "Pokud jste si i zvolili více než jeden jazyk, musíte si nejprve vybrat jeden "
 "z nich jako váš upřednostňovaný jazyk na první jazykové obrazovce. Ten bude "
 "též označen jako vybraný na obrazovce s vícero jazyky."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectLanguage.xml:50
+#: en/selectLanguage.xml:76
+#, fuzzy
 msgid ""
 "If your keyboard language is not the same as your preferred language, then "
-"it is advisable to install the language of your keyboard as well."
+"it is advisable to install the required language for your keyboard as well"
 msgstr ""
 "Pokud jazyk vaší klávesnice není ten samý jako váš upřednostňovaný jazyk, "
 "potom se doporučuje nainstalovat stejně tak jazyk vaší klávesnice."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectLanguage.xml:56
-msgid "Mageia uses UTF-8 (Unicode) support by default."
-msgstr "Mageia používá jako výchozí podporu pro UTF-8 (Unicode)."
-
-#. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectLanguage.xml:58
+#: en/selectLanguage.xml:82
 #, fuzzy
 msgid ""
-"This may be disabled in the <emphasis role=\"bold\">Multiple languages</"
-"emphasis> screen if you know that it is inappropriate for your language. "
-"Disabling UTF-8 applies to all installed languages."
+"Mageia uses UTF-8 (Unicode) support by default. This may be disabled in the "
+"<emphasis>Multiple languages</emphasis> screen if you know that it is "
+"inappropriate for your language. Disabling UTF-8 applies to all installed "
+"languages."
 msgstr ""
 "Tato může být vypnuta na obrazovce \"více jazyků\", pokud víte, že je "
 "nevhodná pro váš jazyk. Zakázání UTF-8 se použije pro všechny nainstalované "
 "jazyky."
 
 #. type: Content of: <section><itemizedlist><listitem><para>
-#: en/selectLanguage.xml:64
+#: en/selectLanguage.xml:89
+#, fuzzy
 msgid ""
-"You can change the language of your system after installation in the Mageia "
-"Control Center -> System -> Manage localization for your system."
+"You can change the language for your system post-installation in the "
+"<menuchoice> <guimenu>Mageia Control Center</guimenu> <guimenuitem>System</"
+"guimenuitem> <guimenuitem>localization for your system</guimenuitem> </"
+"menuchoice>."
 msgstr ""
 "Jazyk vašeho systému po instalaci můžete změnit v nabídce Ovládací centrum "
 "Mageia -> Systém -> Spravovat lokalizaci pro váš systém."
 
 #. type: Content of: <section><info><title>
-#: en/selectMouse.xml:4
+#: en/selectMouse.xml:10
 msgid "Select mouse"
 msgstr "Výběr myši"
 
@@ -4429,17 +4654,19 @@ msgstr "Výběr myši"
 #.  NEEDS TO BE REVIEWED! 
 #.  adding some "real" text now that we know the page shows up in the right place
 #.  marja 2012-04-24 adding screenshot 
+#. 2018/02/15 apb: Text and typography.
 #. type: Content of: <section><mediaobject>
-#: en/selectMouse.xml:16
+#: en/selectMouse.xml:24
+#, fuzzy
 msgid ""
-"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
-"format=\"PNG\" > </imagedata> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectMouse.png\" "
+"format=\"PNG\"/> </imageobject>"
 msgstr ""
-"<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
-"format=\"PNG\" > </imagedata> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-selectKeyboard.png"
+"\" /> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/selectMouse.xml:23
+#: en/selectMouse.xml:29
 msgid ""
 "If you are not happy with how your mouse responds, you can select a "
 "different one here."
@@ -4448,26 +4675,29 @@ msgstr ""
 "typ."
 
 #. type: Content of: <section><para>
-#: en/selectMouse.xml:25
+#: en/selectMouse.xml:32
+#, fuzzy
 msgid ""
-"Usually, <guilabel>Universal</guilabel> - <guilabel>Any PS/2 and USB mice</"
-"guilabel> is a good choice."
+"Usually, <menuchoice> <guimenu>Universal</guimenu> <guimenuitem>Any PS/2 and "
+"USB mice</guimenuitem> </menuchoice> is a good choice."
 msgstr ""
 "Obyčejně je <guilabel>Univerzální</guilabel> - <guilabel>kterákoli PS/2</"
 "guilabel> a <guilabel>USB myš</guilabel> je dobrou volbou."
 
 #. type: Content of: <section><para>
-#: en/selectMouse.xml:27
+#: en/selectMouse.xml:38
+#, fuzzy
 msgid ""
-"Select <guilabel>Universal</guilabel> - <guilabel>Force evdev</guilabel> to "
-"configure the buttons that do not work on a mouse with six or more buttons."
+"Select <menuchoice> <guimenu>Universal</guimenu> <guimenuitem>Force edev</"
+"guimenuitem> </menuchoice> to configure the buttons that do not work on a "
+"mouse with six or more buttons."
 msgstr ""
 "Vyberte <guilabel>Univerzální</guilabel> - <guilabel>Vynutit evdev</"
 "guilabel> pro nastavení tlačítek, která nefungují na myši mající šest nebo "
 "více tlačítek."
 
-#. type: Content of: <section><info><title>
-#: en/setupBootloaderAddEntry.xml:7
+#. type: Content of: <section><section><section><title>
+#: en/setupBootloaderAddEntry.xml:7 en/setupBootloader.xml:206
 msgid "Add or Modify a Boot Menu Entry"
 msgstr "Přidaní nebo změna položky v nabídce zavaděče"
 
@@ -4491,105 +4721,63 @@ msgstr ""
 "efi_and_Mageia</link>"
 
 #. type: Content of: <section><info><title>
-#: en/setupBootloader.xml:7
-msgid "Bootloader main options"
-msgstr "Základní nastavení zaváděcího programu"
-
-#. type: Content of: <section><section><title>
 #: en/setupBootloader.xml:10
-msgid "Bootloader interface"
+#, fuzzy
+msgid "Bootloader"
 msgstr "Rozhraní zavaděče"
 
-#. type: Content of: <section><section><para>
-#: en/setupBootloader.xml:11
-msgid "By default, Mageia uses exclusively:"
-msgstr "Ve výchozím stavu Mageia používá výhradně:"
-
-#. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:14
-msgid ""
-"GRUB2 (with or without graphical menu) for a Legacy/MBR or Legacy/GPT system"
+#. type: Content of: <section><section><title>
+#: en/setupBootloader.xml:13
+msgid "Grub2"
 msgstr ""
 
-#. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:18
+#. type: Content of: <section><section><itemizedlist><title>
+#: en/setupBootloader.xml:15
 #, fuzzy
-msgid "GRUB2-efi for a UEFI system."
-msgstr "Grub2-efi pro UEFI systémy."
-
-#. type: Content of: <section><section><tip><para>
-#: en/setupBootloader.xml:22
-msgid "The Mageia graphical menus are nice :)"
-msgstr "Grafické nabídky Mageii jsou hezké :)"
-
-#. type: Content of: <section><section><section><title>
-#: en/setupBootloader.xml:25
-#, fuzzy
-msgid "GRUB2 on Legacy/MBR and Legacy/GPT systems"
+msgid "Grub2 on Legacy MBR/GPT systems"
 msgstr "Grub2 na systémech Legacy/MBR a Legacy/GPT"
 
-#. type: Content of: <section><section><section><mediaobject>
-#: en/setupBootloader.xml:27
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:17
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-"
-"setupBootloader.png\"/> </imageobject>"
+"GRUB2 (with or without graphical menu) will be used exclusively as the "
+"bootloader for a Legacy/MBR or Legacy/GPT system."
 msgstr ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref=\"live-"
-"setupBootloader.png\"/> </imageobject>"
 
-#. type: Content of: <section><section><section><para>
-#: en/setupBootloader.xml:34 en/setupBootloader.xml:56
-#, fuzzy
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:21
 msgid ""
-"Don't modify the <emphasis role=\"bold\">Boot Device</emphasis> unless you "
-"really know what you are doing."
-msgstr "Neupravujte \"Zaváděcí zařízení\", pokud s jistotou nevíte, co děláte."
+"By default, a new bootloader will be written into either the MBR (Master "
+"Boot Record) of your first hard drive or in the BIOS boot partition."
+msgstr ""
 
-#. type: Content of: <section><section><section><title>
-#: en/setupBootloader.xml:38
+#. type: Content of: <section><section><itemizedlist><title>
+#: en/setupBootloader.xml:27
 #, fuzzy
-msgid "GRUB2-efi on UEFI systems"
+msgid "Grub2-efi on UEFI systems"
 msgstr "Grub2-efi na UEFI systémech"
 
-#. type: Content of: <section><section><section><para>
-#: en/setupBootloader.xml:39
-#, fuzzy
-msgid ""
-"With a UEFI system, the user interface is slightly different as you cannot "
-"choose between the <emphasis role=\"bold\">with</emphasis> or <emphasis role="
-"\"bold\">without graphical menu</emphasis> options."
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:29
+msgid "GRUB2-efi will be used exclusively as the bootloader for a UEFI system."
 msgstr ""
-"Se systémem UEFI je uživatelské rozhraní trochu odlišné, protože si nemůžete "
-"volit postup s nebo bez grafické nabídky"
 
-#. type: Content of: <section><section><section><mediaobject>
-#: en/setupBootloader.xml:42
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:33
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </"
-"imageobject>"
+"By default, a new bootloader (Grub2-efi) will be written into the ESP (EFI "
+"System Partition)."
 msgstr ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </"
-"imageobject>"
 
-#. type: Content of: <section><section><section><para>
-#: en/setupBootloader.xml:49
+#. type: Content of: <section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:35
 #, fuzzy
 msgid ""
-"If Mageia is the only system installed on your computer, the installer "
-"created an ESP (EFI System Partition) to house the bootloader (GRUB2-efi). "
-"If there are already UEFI operating systems installed on your computer "
-"(Windows 8 for example), the Mageia installer detects the existing ESP "
-"created by Windows and adds GRUB2-efi. Although it is possible to have "
-"several ESPs, only one is required (and advised), whatever the number of "
-"operating systems you have."
+"If there are already UEFI-based operating systems installed on your computer "
+"(Windows 8 for example), the Mageia installer will detect the existing ESP "
+"created by Windows and add grub2-efi to it. If no ESP exists, then one will "
+"be created. Although it is possible to have several ESPs, only one is "
+"required, whatever the number of operating systems you have."
 msgstr ""
 "Pokud je Mageia jediným systémem nainstalovaným na váš počítač, instalátor "
 "vytvořil ESP (systémový oddíl EFI) pro zapsání zavaděče (Grub2-efi). Pokud "
@@ -4599,240 +4787,344 @@ msgstr ""
 "oddílů ESP, radí se mít a stačí jen jeden, bez ohledu na počet operačních "
 "systémů, které máte v počítači."
 
-#. type: Content of: <section><section><title>
-#: en/setupBootloader.xml:61
-msgid "Using a Mageia bootloader"
-msgstr "Použití zavaděče Mageii"
+#. type: Content of: <section><section><info><title>
+#: en/setupBootloader.xml:46
+#, fuzzy
+msgid "Bootloader Setup"
+msgstr "Rozhraní zavaděče"
 
-#. type: Content of: <section><section><para>
-#: en/setupBootloader.xml:62
+#. type: Content of: <section><section><section><title>
+#: en/setupBootloader.xml:49
+msgid "Bootloader main options"
+msgstr "Základní nastavení zaváděcího programu"
+
+#. type: Content of: <section><section><section><mediaobject>
+#: en/setupBootloader.xml:51
 #, fuzzy
 msgid ""
-"By default, and according to your system, Mageia writes one of the following:"
-msgstr "Ve výchozím nastavení, podle systému, zapíše Mageia nový:"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-setupBootloader.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata fileref=\"live-setupBootloader.png\" xml:id=\"setupBootloader-"
+"im1\"/> </imageobject>"
+msgstr ""
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
+"imageobject>"
 
-#. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:66
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:62
+#, fuzzy
+msgid "<emphasis role=\"bold\">Bootloader to use</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:63
 msgid ""
-"a GRUB2 bootloader either into the MBR (Master Boot Record) of your first "
-"hard drive or in the BIOS boot partition."
+"This feature is only available to Legacy MBR/BIOS systems.  Users of UEFI "
+"systems will not see this option here."
 msgstr ""
 
-#. type: Content of: <section><section><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:70
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:67
 #, fuzzy
-msgid "a GRUB2-efi bootloader into the ESP"
-msgstr "Grub2-efi zavaděč do ESP"
+msgid "<emphasis role=\"bold\">Boot device</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><section><para>
-#: en/setupBootloader.xml:73
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:68
+#, fuzzy
+msgid "Don't change this unless you really know what you are doing"
+msgstr "Věci měňte jen tehdy, když velmi dobře víte, co děláte."
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:72
+#, fuzzy
 msgid ""
-"If you already have other operating systems installed, Mageia attempts to "
-"add them to your new Mageia boot menu. If you don't want this behaviour, "
-"click on <guibutton>Next</guibutton> and then untick the <emphasis role="
-"\"bold\">Probe Foreign OS</emphasis> option."
+"<emphasis role=\"bold\">Delay before booting the default image</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:74
+msgid ""
+"This text box lets you set a delay, in seconds, before the default operating "
+"system is started up."
 msgstr ""
 
-#. type: Content of: <section><section><mediaobject>
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
 #: en/setupBootloader.xml:78
+#, fuzzy
+msgid "<emphasis role=\"bold\">Security</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:79
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
-"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
-"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
-"imageobject>"
+"This allows you to set a password for the bootloader. This means a username "
+"and password will be required when booting in order to select a booting "
+"entry or change settings. This is optional, and most people are not likely "
+"to have a need for it. The username is <literal>root</literal> and the "
+"password is the one chosen hereafter."
 msgstr ""
-"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
-"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
-"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
-"imageobject>"
-
-#. type: Content of: <section><section><title>
-#: en/setupBootloader.xml:87
-msgid "Using an existing bootloader"
-msgstr "Použití už existujícího zavaděče"
 
-#. type: Content of: <section><section><para>
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
 #: en/setupBootloader.xml:88
 #, fuzzy
+msgid "Choose a password for the bootloader (optional)"
+msgstr "<guilabel>Heslo</guilabel>: Do tohoto textového pole vložíte heslo"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:91
+#, fuzzy
+msgid "<emphasis role=\"bold\">Password (again)</emphasis>"
+msgstr "<emphasis role=\"bold\">Měnění velikostí oddílu:</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:92
+#, fuzzy
 msgid ""
-"The exact procedure for adding your Mageia system to an existing bootloader "
-"is beyond the scope of this documentation, however in most cases it will "
-"involve running the relevant bootloader installation program which should "
-"detect and add it automatically. See the documentation for the operating "
-"system in question."
+"Retype the password and DrakX will check that it matches with the one set "
+"above"
 msgstr ""
-"Přesný postup pro přidání vašeho systému Mageia k existujícímu zavaděči "
-"přesahuje oblast této nápovědy, avšak ve většině případů bude zahrnovat "
-"spuštění příslušného programu na instalaci zavaděče, který by ho měl "
-"rozpoznat a přidat automaticky. Podívejte se na dokumentaci k operačnímu "
-"systému, o nějž jde."
+"<guilabel>Heslo (znovu)</guilabel>: Znovu zadejte heslo a drakx zkontroluje, "
+"zda odpovídá heslu zadanému výše."
 
-#. type: Content of: <section><section><title>
-#: en/setupBootloader.xml:95
-msgid "Using chain loading"
+#. type: Content of: <section><section><section><para>
+#: en/setupBootloader.xml:96 en/setupBootloader.xml:154
+#, fuzzy
+msgid "<emphasis>Advanced</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:99
+#, fuzzy
+msgid "<emphasis>Enable ACPI</emphasis>"
+msgstr "<emphasis>Všeobecný</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:100
+msgid ""
+"ACPI (Advanced Configuration and Power Interface) is a standard for power "
+"management. It can save energy by stopping unused devices. Deselecting it "
+"could be useful if, for example, your computer does not support ACPI or if "
+"you think the ACPI implementation might cause some problems (for instance "
+"random reboots or system lockups)."
 msgstr ""
 
-#. type: Content of: <section><section><para>
-#: en/setupBootloader.xml:96
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:108
+#, fuzzy
+msgid "<emphasis>Enable SMP</emphasis>"
+msgstr "<emphasis>Všeobecný</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:109
 msgid ""
-"If you don't want a bootable Mageia, but to chain-load it from another OS, "
-"click on <guibutton>Next</guibutton>, then on <guibutton>Advanced</"
-"guibutton> and tick the box <guilabel>Do not touch ESP or MBR</guilabel>."
+"This option enables/disables symmetric multiprocessing for multi-core "
+"processors"
 msgstr ""
 
-#. type: Content of: <section><section><mediaobject>
-#: en/setupBootloader.xml:101
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:113
+#, fuzzy
+msgid "<emphasis>Enable APIC</emphasis>"
+msgstr "<emphasis>Všeobecný</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:114
 msgid ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align="
-"\"center\"/> </imageobject>"
+"Enabling this gives the operating system access to the Advanced Programmable "
+"Interrupt Controller. APIC devices permit more complex priority models, and "
+"Advanced IRQ (Interrupt Request)  management."
 msgstr ""
-"<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
-"setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" align="
-"\"center\"/> </imageobject>"
 
-#. type: Content of: <section><section><para>
-#: en/setupBootloader.xml:108
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:120
+#, fuzzy
+msgid "<emphasis>Enable Local APIC</emphasis>"
+msgstr "<emphasis>Všeobecný</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:121
 msgid ""
-"You will get a warning that the bootloader is missing, ignore it by clicking "
-"<guibutton>OK</guibutton>."
+"Here you can set Local APIC, which manages all external interrupts for a "
+"specific processor in an SMP system"
 msgstr ""
-"Dostanete varování, že chybí zavaděč. Nevšímejte si toho a klepněte na "
-"<guibutton>OK</guibutton>."
 
-#. type: Content of: <section><section><mediaobject>
-#: en/setupBootloader.xml:111
+#. type: Content of: <section><section><section><title>
+#: en/setupBootloader.xml:127
+#, fuzzy
+msgid "Bootloader Configuration"
+msgstr "Nastavení zvuku"
+
+#. type: Content of: <section><section><section><mediaobject>
+#: en/setupBootloader.xml:129
+#, fuzzy
 msgid ""
-"<imageobject> <imagedata fileref=\"live-setupBootloader5.png\"/> </"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata align=\"center\" fileref=\"live-setupBootloader3.png\"/> </"
 "imageobject>"
 msgstr ""
-"<imageobject> <imagedata fileref=\"live-setupBootloader5.png\"/> </"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
 "imageobject>"
 
-#. type: Content of: <section><section><title>
-#: en/setupBootloader.xml:117
-msgid "Options"
-msgstr "Volby"
-
-#. type: Content of: <section><section><section><title>
-#: en/setupBootloader.xml:119
-msgid "First page"
-msgstr "První strana"
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:139
+#, fuzzy
+msgid "<emphasis role=\"bold\">Default</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:120
-msgid ""
-"<guilabel>Delay before booting the default image</guilabel>: This lets you "
-"set a delay in seconds before the default operating system is started up."
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:140
+msgid "The operating system to started up by default"
 msgstr ""
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:122
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:143
+#, fuzzy
+msgid "<emphasis role=\"bold\">Append</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:144
 msgid ""
-"<guilabel>Security</guilabel>: This allows you to set a password for the "
-"bootloader. This means a username and password will be required when booting "
-"to select a booting entry or change settings. The username is <emphasis role="
-"\"bold\">root</emphasis> and the password is the one chosen here-after."
+"This option lets you pass information to the kernel or tell the kernel to "
+"give you more information as it boots"
 msgstr ""
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:125
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:148
 #, fuzzy
-msgid "<guilabel>Password</guilabel>: Choose a password for the bootloader."
-msgstr "<guilabel>Heslo</guilabel>: Do tohoto textového pole vložíte heslo"
+msgid "<emphasis role=\"bold\">Probe foreign OS</emphasis>"
+msgstr "<emphasis role=\"bold\">Pokročilé</emphasis>"
+
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:149
+msgid ""
+"If you already have other operating systems installed, Mageia attempts to "
+"add them to your new Mageia boot menu. If you don't want this behaviour, "
+"then untick the Probe Foreign OS option."
+msgstr ""
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:126
+#. type: Content of: <section><section><section><mediaobject>
+#: en/setupBootloader.xml:156
 #, fuzzy
 msgid ""
-"<guilabel>Password (again)</guilabel>: Retype the password and DrakX will "
-"check that it matches with the one above."
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-setupBootloader4.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata align=\"center\" fileref=\"live-setupBootloader4.png\"/> </"
+"imageobject>"
 msgstr ""
-"<guilabel>Heslo (znovu)</guilabel>: Znovu zadejte heslo a drakx zkontroluje, "
-"zda odpovídá heslu zadanému výše."
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-setupBootloader3.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata fileref=\"live-setupBootloader3.png\" align=\"center\"/> </"
+"imageobject>"
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:127 en/setupBootloader.xml:159
-msgid "<guilabel>Advanced</guilabel>"
-msgstr "<guilabel>Pokročilé</guilabel>"
+#: en/setupBootloader.xml:166
+#, fuzzy
+msgid "<emphasis>Video mode</emphasis>"
+msgstr "<emphasis>Dodavatel</emphasis>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:127
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:167
 msgid ""
-"<guilabel>Enable ACPI:</guilabel> ACPI (Advanced Configuration and Power "
-"Interface) is a standard for power management. It can save energy by "
-"stopping unused devices.  Deselecting it could be useful if, for example, "
-"your computer does not support ACPI or if you think the ACPI implementation "
-"might cause some problems (for instance random reboots or system lockups)."
+"This sets the screen size and colour depth to be used by the boot menu. If "
+"you click the down-triangle you will be offered other size and colour depth "
+"options."
 msgstr ""
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:133
-msgid ""
-"<guilabel>Enable SMP</guilabel>: This option enables/disables symmetric "
-"multiprocessing for multi core processors."
-msgstr ""
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:172
+#, fuzzy
+msgid "<emphasis>Do not touch ESP or MBR</emphasis>"
+msgstr "<emphasis>Dodavatel</emphasis>"
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:135
+#. type: Content of: <section><section><section><itemizedlist><listitem><para>
+#: en/setupBootloader.xml:173
 msgid ""
-"<guilabel>Enable APIC</guilabel>: This gives the operating system access to "
-"the Advanced Programmable Interrupt Controller. APIC devices permit more "
-"complex priority models, and Advanced IRQ (Interrupt Request) management."
+"Select this option if you don't want a bootable Mageia, but would rather "
+"chain-load it from another OS. You will get a warning that the bootloader is "
+"missing. Click<emphasis> Ok</emphasis> if you are sure you understand the "
+"implications, and wish to proceed."
 msgstr ""
 
-#. type: Content of: <section><section><section><para><itemizedlist><listitem><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:138
+#. type: Content of: <section><section><section><mediaobject>
+#: en/setupBootloader.xml:181
+#, fuzzy
 msgid ""
-"<guilabel>Enable Local APIC</guilabel>: Local APIC manages all external "
-"interrupts for a specific processor in an SMP system."
+"<imageobject> <imagedata fileref=\"live-setupBootloader5.png\" align=\"center"
+"\"/> </imageobject>"
 msgstr ""
+"<imageobject> <imagedata fileref=\"live-setupBootloader5.png\"/> </"
+"imageobject>"
 
-#. type: Content of: <section><section><section><title>
-#: en/setupBootloader.xml:143
-msgid "Next page"
-msgstr "Další strana"
+#. type: Content of: <section><section><title>
+#: en/setupBootloader.xml:188
+#, fuzzy
+msgid "Other Options"
+msgstr "Volby"
 
-#. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:146
-msgid "<guilabel>Default:</guilabel> Operating system started up by default"
-msgstr ""
+#. type: Content of: <section><section><section><title>
+#: en/setupBootloader.xml:190
+msgid "Using an existing bootloader"
+msgstr "Použití už existujícího zavaděče"
 
-#. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:150
+#. type: Content of: <section><section><section><para>
+#: en/setupBootloader.xml:191
+#, fuzzy
 msgid ""
-"<guilabel>Append:</guilabel> This option lets you pass the kernel "
-"information or tell the kernel to give you more information as it boots."
+"The exact procedure for adding Mageia to an existing bootloader is beyond "
+"the scope of this documentation. However in most cases it will involve "
+"running the relevant bootloader installation program, which should detect "
+"Mageia and automatically add an entry for it in the bootloader menu. See the "
+"documentation for the relevant operating system."
 msgstr ""
+"Přesný postup pro přidání vašeho systému Mageia k existujícímu zavaděči "
+"přesahuje oblast této nápovědy, avšak ve většině případů bude zahrnovat "
+"spuštění příslušného programu na instalaci zavaděče, který by ho měl "
+"rozpoznat a přidat automaticky. Podívejte se na dokumentaci k operačnímu "
+"systému, o nějž jde."
 
-#. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:155
+#. type: Content of: <section><section><section><title>
+#: en/setupBootloader.xml:199
+#, fuzzy
+msgid "Installing Without a Bootloader"
+msgstr "Použití zavaděče Mageii"
+
+#. type: Content of: <section><section><section><para>
+#: en/setupBootloader.xml:200
 msgid ""
-"<guilabel>Probe foreign OS</guilabel>: see above <link linkend="
-"\"setupMageiaBootloader\">Using a Mageia bootloader</link>"
+"While you can opt to install Mageia without a bootloader (see section 2.1 "
+"Advanced), this is not recommended unless you absolutely know what you are "
+"doing, as without some form of bootloader your operating system will be "
+"unable to start."
 msgstr ""
-"<guilabel>Vyzkoušet cizí operační systém</guilabel>: viz výše <link linkend="
-"\"setupMageiaBootloader\">Používat Mageiin zavaděč</link>"
 
-#. type: Content of: <section><section><section><itemizedlist><listitem><para><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:159
+#. type: Content of: <section><section><section><para>
+#: en/setupBootloader.xml:207
 msgid ""
-"<guilabel>Video mode:</guilabel> This sets the screen size and colour depth "
-"to be used by the boot menu. If you click the down triangle you will be "
-"offered other size and colour depth options."
+"To do this you need to manually edit <filename>/boot/grub2/custom.cfg</"
+"filename> or use the software <application>grub-customizer</application> "
+"tool instead (available in the Mageia repositories)."
 msgstr ""
 
-#. type: Content of: <section><section><section><itemizedlist><listitem><para><itemizedlist><listitem><para>
-#: en/setupBootloader.xml:162
+#. type: Content of: <section><section><section><note><para>
+#: en/setupBootloader.xml:212
+#, fuzzy
 msgid ""
-"<emphasis role=\"bold\">Do not touch ESP or MBR</emphasis>: see above <link "
-"linkend=\"setupChainLoading\">Using the chain loading</link>"
+"For more information, see: <link ns4:href=\"https://wiki.mageia.org/en/Grub2-"
+"efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-efi_and_Mageia</link>"
 msgstr ""
+"Pro více informací se podívejte na naše stránky: <link ns2:href=\"https://"
+"wiki.mageia.org/en/Grub2-efi_and_Mageia\">https://wiki.mageia.org/en/Grub2-"
+"efi_and_Mageia</link>"
 
 #. type: Content of: <section><info><title>
-#: en/setupSCSI.xml:3
+#: en/setupSCSI.xml:10
 msgid "Setup SCSI"
 msgstr "Nastavení SCSI"
 
@@ -4844,18 +5136,20 @@ msgstr "Nastavení SCSI"
 #.  marja 2012-04-24 added screenshot 
 #.  marja 2012-04-25 replacing John's version 1.6 because that one was based on the
 #.        Mdv doc instead of on our setupSCSI file 
+#. 2018/02/15 apb: Text and typography.
+#. 2018/0217 apb: Merge 2nd/3rd paras and reword.
 #. type: Content of: <section><mediaobject>
-#: en/setupSCSI.xml:22
+#: en/setupSCSI.xml:33
 #, fuzzy
 msgid ""
-"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-setupSCSI.png\" align="
-"\"center\" xml:id=\"setupSCSI-im1\" revision=\"1\"/> </imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-setupSCSI.png\" "
+"format=\"PNG\" revision=\"1\" xml:id=\"setupSCSI-im1\"/> </imageobject>"
 msgstr ""
-"<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" "
-"align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>"
+"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
+"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/setupSCSI.xml:27
+#: en/setupSCSI.xml:39
 #, fuzzy
 msgid ""
 "DrakX will normally detect hard disks correctly. However, with some older "
@@ -4867,104 +5161,59 @@ msgstr ""
 "rozpoznat disk."
 
 #. type: Content of: <section><para>
-#: en/setupSCSI.xml:32
+#: en/setupSCSI.xml:44
 #, fuzzy
 msgid ""
-"If this happens, you will need to manually tell DrakX which SCSI drive(s) "
-"you have."
+"If your device is not recognised, you will need to manually tell DrakX which "
+"SCSI drive(s) you have. DrakX should then be able to configure the drive(s) "
+"correctly."
 msgstr ""
 "Pokud k tomuto dojde, budete muset ručně říci Drakx, jaký disk(y) SCSI máte."
 
-#. type: Content of: <section><para>
-#: en/setupSCSI.xml:35
-msgid "DrakX should then be able to configure the drive(s) correctly."
-msgstr "DrakX by pak měl být schopen správně nastavit disk(y)."
-
 #. type: Content of: <section><info><title>
-#: en/soundConfig.xml:3
+#: en/soundConfig.xml:10
 msgid "Sound Configuration"
 msgstr "Nastavení zvuku"
 
 #.  Lebarhon 20170209 updated SC
+#. 2018/02/13 apb: Text and typography.
+#. 2018/02/17 apb: Centre-align PNG
 #. type: Content of: <section><mediaobject>
-#: en/soundConfig.xml:9
-msgid ""
-"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:"
-"id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"
-msgstr ""
-"<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" xml:"
-"id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"
-
-#. type: Content of: <section><para>
-#: en/soundConfig.xml:14
+#: en/soundConfig.xml:20
 #, fuzzy
 msgid ""
-"In this screen the name of the driver that the installer chose for your "
-"sound card is given, which will be the default driver if one exists."
+"<imageobject> <imagedata align=\"center\" fileref=\"dx2-soundConfig.png\" "
+"format=\"PNG\" revision=\"1\" xml:id=\"soundConfig-im1\"/> </imageobject>"
 msgstr ""
-"Na této obrazovce je udán název ovladače, který zvolil instalátor pro vaši "
-"zvukovou kartu, což bude výchozí ovladač, pokud máte některý určen jako "
-"výchozí."
+"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
+"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/soundConfig.xml:18
+#: en/soundConfig.xml:26
 msgid ""
-"The default driver should work without problems. However, if after install "
-"you do encounter problems, then run <command>draksound</command> or start "
-"this tool via MCC (Mageia Control Center), by choosing the "
-"<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound "
-"Configuration</guilabel> at the top right of the screen."
+"This screen shows the details of the sound card driver chosen for you by the "
+"installer, and this driver should work without problems."
 msgstr ""
-"Výchozí ovladač by měl pracovat bez problémů. Avšak, pokud se po instalaci "
-"střetáváte s problémy, potom spustěte příkaz <command>draksound</command> "
-"nebo spustěte tento nástroj přes nabídku MCC (Ovládací centrum Mageii), "
-"zvolením panelu <guilabel>Hardware</guilabel> a klepnutím na "
-"<guilabel>Nastavení zvuku</guilabel> v horní pravé části obrazovky."
 
 #. type: Content of: <section><para>
-#: en/soundConfig.xml:24
-#, fuzzy
+#: en/soundConfig.xml:29
 msgid ""
-"Then, in the <emphasis role=\"bold\">draksound</emphasis> or <emphasis role="
-"\"bold\">Sound Configuration</emphasis> tool screen, click on "
-"<guibutton>Troubleshooting</guibutton> to find useful advice about how to "
-"solve the problem."
+"However, if you encounter any issues post-install, then run "
+"<command>draksound</command> or start this tool via <menuchoice> "
+"<guimenu>Mageia Control Center</guimenu> <guimenuitem>Hardware</guimenuitem> "
+"<guimenuitem>Sound Configuration</guimenuitem> </menuchoice>. Then, in the "
+"<literal>draksound</literal> or <emphasis>Sound Configuration</emphasis> "
+"screen, click on <emphasis>Troubleshooting</emphasis> to find useful advice "
+"about how to solve the problem."
 msgstr ""
-"Potom na obrazovce draksound nebo nástroje na \"Nastavení zvuku\", klepněte "
-"na <guibutton>Rozšíření</guibutton> a potom na <guibutton>Řešení problémů</"
-"guibutton>, abyste našli velmi užitečnou radu o tom, jak vyřešit problém."
 
 #. type: Content of: <section><section><info><title>
-#: en/soundConfig.xml:30
+#: en/soundConfig.xml:43
 msgid "Advanced"
 msgstr "Rozšíření"
 
-#. type: Content of: <section><section><para>
-#: en/soundConfig.xml:33
-#, fuzzy
-msgid ""
-"Clicking <emphasis role=\"bold\"><guibutton>Advanced</guibutton></emphasis> "
-"in this screen, during install, is useful if there is no default driver and "
-"there are several drivers available, but you think the installer selected "
-"the wrong one."
-msgstr ""
-"Klepnutí na <guibutton>Rozšíření</guibutton> na této obrazovce, během "
-"instalace, je užitečné tehdy, pokud tu není žádný výchozí ovladač a je tu "
-"dostupných více ovládačů, ale vy si myslíte, že instalátor vybral nesprávný "
-"ovladač."
-
-#. type: Content of: <section><section><para>
-#: en/soundConfig.xml:38
-#, fuzzy
-msgid ""
-"In that case you can select a different driver after clicking on <emphasis "
-"role=\"bold\"><guibutton>Let me pick any driver</guibutton></emphasis>."
-msgstr ""
-"V tom případě můžete zvolit odlišný ovladač po klepnutí na <guibutton>Nechat "
-"mě vybrat jiný ovladač</guibutton>."
-
 #. type: Content of: <section><info><title>
-#: en/takeOverHdConfirm.xml:3
+#: en/takeOverHdConfirm.xml:10
 msgid "Confirm hard disk to be formatted"
 msgstr "Potvrzení naformátování pevného disku"
 
@@ -4974,80 +5223,80 @@ msgstr "Potvrzení naformátování pevného disku"
 #.     hard disk." with "if you are not sure about your choice", because I'm sure I
 #.     saw this help screen when I had only one HD 
 #.  2013-05-05 marja added screenshot 
+#. 2018/02/15 apb: Text and typography
+#. 2018/02/20 apb: Change the 2 paras to itemized listitems.
 #. type: Content of: <section><mediaobject>
-#: en/takeOverHdConfirm.xml:18
+#: en/takeOverHdConfirm.xml:29
 #, fuzzy
 msgid ""
-"<imageobject condition=\"live\"> <imagedata format=\"PNG\" fileref=\"live-"
-"takeOverHdConfirm.png\" align=\"center\"/> </imageobject> <imageobject "
-"condition=\"classical\"> <imagedata format=\"PNG\" fileref=\"dx2-"
-"takeOverHdConfirm.png\" align=\"center\"/> </imageobject>"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-takeOverHdConfirm.png\" format=\"PNG\"/> </imageobject> <imageobject "
+"condition=\"live\"> <imagedata align=\"center\" fileref=\"live-"
+"takeOverHdConfirm.png\" format=\"PNG\"/> </imageobject>"
 msgstr ""
-"<imageobject condition='live'> <imagedata fileref=\"live-takeOverHdConfirm."
-"png\" format=\"PNG\" align=\"center\" ></imagedata> </imageobject> "
-"<imageobject condition='classical'> <imagedata fileref=\"dx2-"
-"takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </"
+"<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+"\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition=\"live"
+"\"> <imagedata align=\"center\" fileref=\"live-doPartitionDisks3.png\"/> </"
 "imageobject>"
 
-#. type: Content of: <section><para>
-#: en/takeOverHdConfirm.xml:27
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/takeOverHdConfirm.xml:42
 #, fuzzy
 msgid ""
-"Click on <guibutton>Previous</guibutton> if you are at all unsure about your "
+"Click on <emphasis>Previous</emphasis> if you are at all unsure about your "
 "choice."
 msgstr ""
 "Klepněte na <guibutton>Předchozí</guibutton>, pokud si nejste jistí vaší "
 "volbou."
 
-#. type: Content of: <section><para>
-#: en/takeOverHdConfirm.xml:31
+#. type: Content of: <section><itemizedlist><listitem><para>
+#: en/takeOverHdConfirm.xml:48
 #, fuzzy
 msgid ""
-"Click on <guibutton>Next</guibutton> to proceed if you are sure that it is "
-"ok to erase every partition, every operating system and all data that might "
-"be on that hard disk."
+"Click on <emphasis>Next</emphasis> to proceed if you are sure that it is OK "
+"to erase <emphasis role=\"bold\">every</emphasis> partition, <emphasis role="
+"\"bold\">every</emphasis> operating system and <emphasis role=\"bold\">all "
+"data</emphasis> that might be on that hard disk."
 msgstr ""
 "Klepněte na <guibutton>Další</guibutton>, pokud si jste jistí a chcete "
 "smazat každý oddíl, každý operační systém a všechny údaje na onom pevném "
 "disku."
 
 #. type: Content of: <section><info><title>
-#: en/testing.xml:9
+#: en/testing.xml:3
 msgid "Testing Mageia as Live system"
 msgstr "Vyzkoušení Mageii jako Živého systému"
 
 #. type: Content of: <section><section><info><title>
-#: en/testing.xml:14
+#: en/testing.xml:8
 msgid "Live mode"
 msgstr "Živý režim"
 
+#. type: Content of: <section><section><para>
+#: en/testing.xml:11
+msgid ""
+"This is the screen you will see if you selected the <emphasis role=\"bold"
+"\">Boot Mageia </emphasis>option from the Live media menu."
+msgstr ""
+
 #. type: Content of: <section><section><mediaobject>
-#: en/testing.xml:18
+#: en/testing.xml:14
 msgid "<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>"
 msgstr ""
 "<imageobject> <imagedata fileref=\"live-liveMode.png\"/> </imageobject>"
 
-#. type: Content of: <section><section><para>
-#: en/testing.xml:23
-msgid ""
-"You get this screen if you selected \"Boot Mageia\". If not, you get the "
-"\"<link linkend=\"doPartitionDisks\">Partitioning</link> step\""
-msgstr ""
-"Tuto obrazovku dostanete, pokud jste si vybrali \"Zavést Mageiu\". Pokud ne, "
-"tak dostanete krok \"<link linkend=\"doPartitionDisks\">Rozdělení disku</"
-"link>\""
-
 #. type: Content of: <section><section><section><info><title>
-#: en/testing.xml:28
+#: en/testing.xml:21
 msgid "Testing hardware"
 msgstr "Zkoušení hardware"
 
 #. type: Content of: <section><section><section><para>
-#: en/testing.xml:31
+#: en/testing.xml:24
+#, fuzzy
 msgid ""
-"One of the Live mode goals is to test if the hardware is correctly managed "
-"by Mageia. You can check if all devices have a driver in the Hardware "
-"section of the Mageia Control Center. You can test the most current devices:"
+"One of the aims of using the Live mode is to test that your hardware is "
+"correctly managed by Mageia. You can check if all devices have a driver in "
+"the Hardware section of the Mageia Control Center:"
 msgstr ""
 "Jeden z cílů Živého režimu je vyzkoušet, zda je hardware Mageiou správně "
 "spravován. Můžete zkontrolovat, zda všechna zařízení mají svůj ovladač v "
@@ -5055,85 +5304,92 @@ msgstr ""
 "zařízení:"
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/testing.xml:38
+#: en/testing.xml:31
 msgid "network interface: configure it with net_applet"
 msgstr "síťové rozhraní: nastavte ho s net_applet"
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/testing.xml:42
-msgid "graphical card: if you see the previous screen, it's already OK."
+#: en/testing.xml:35
+#, fuzzy
+msgid "graphics card: if you see the previous screen, it's already OK."
 msgstr ""
 "grafická karta: pokud jste už viděli předešlou obrazovku, tak je už OK."
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/testing.xml:47
+#: en/testing.xml:40
 msgid "webcam:"
 msgstr "webová kamera:"
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/testing.xml:51
+#: en/testing.xml:44
 msgid "sound: a jingle has already been played"
 msgstr "zvuk: znělka už byla zahrána"
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/testing.xml:55
-msgid "printer: configure it and print a test page"
+#: en/testing.xml:48
+#, fuzzy
+msgid "printer: configure your printer/s and print a test page"
 msgstr "tiskárna: nastavte ji a vytiskněte zkušební stránku"
 
 #. type: Content of: <section><section><section><itemizedlist><listitem><para>
-#: en/testing.xml:59
+#: en/testing.xml:52
 msgid "scanner: scan a document from ..."
 msgstr "skener: nasnímejte dokument z ..."
 
 #. type: Content of: <section><section><section><para>
-#: en/testing.xml:63
+#: en/testing.xml:56
+#, fuzzy
 msgid ""
-"If all is OK for you, you can process to the installation. If not, you can "
-"leave with the quit button."
+"If everything is satisfactory, you can proceed with the installation. If "
+"not, you can use the <emphasis>Quit</emphasis> button to exit."
 msgstr ""
 "Pokud je to všechno pro vás v pořádku, můžete provést instalaci. Pokud ne, "
 "můžete odejít pomocí tlačítka pro skončení."
 
-#. type: Content of: <section><section><section><remark>
-#: en/testing.xml:66
-msgid "The configuration settings you made here are kept for the installation."
+#. type: Content of: <section><section><section><note><para>
+#: en/testing.xml:61
+#, fuzzy
+msgid ""
+"The configuration settings you apply here are carried over if you decide to "
+"proceed with the installation."
 msgstr ""
 "Nastavení nastavení, která jste tu udělali, jsou zachována pro instalaci."
 
 #. type: Content of: <section><section><section><info><title>
-#: en/testing.xml:72
+#: en/testing.xml:68
 msgid "Launch installation"
 msgstr "Spustit instalaci"
 
-#. type: Content of: <section><section><section><mediaobject>
-#: en/testing.xml:76
-msgid ""
-"<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </"
-"imageobject>"
-msgstr ""
-"<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </"
-"imageobject>"
-
 #. type: Content of: <section><section><section><para>
-#: en/testing.xml:81
+#: en/testing.xml:71
+#, fuzzy
 msgid ""
-"To launch the installation of Mageia LiveCD or Live DVD to the hard disc or "
-"SSD drive, simply click on the icon \"Install on Hard Disk\". You will get "
-"this screen, and then the \"<link linkend=\"doPartitionDisks\">Partitioning</"
-"link> step\" as for the direct installation."
+"To launch the installation of the Live DVD to a hard disk or SSD drive, "
+"simply click the <emphasis>Install on Hard Disk</emphasis> icon on the Live "
+"desktop. You will then see this screen, followed by the <link linkend="
+"\"doPartitionDisks\">Partitioning</link> step."
 msgstr ""
 "Pro spuštění instalace z Mageia LiveCD nebo Live DVD na pevný disk anebo "
 "mechaniku SSD, jednoduše klepněte na ikonu \"Instalovat na pevný disk\". "
 "Obdržíte tuto obrazovku, a potom krok pro \"<link linkend=\"doPartitionDisks"
 "\">Rozdělení disku</link>\" jako u přímé instalace."
 
+#. type: Content of: <section><section><section><mediaobject>
+#: en/testing.xml:77
+msgid ""
+"<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </"
+"imageobject>"
+msgstr ""
+"<imageobject> <imagedata fileref=\"live-liveMode-install.png\"/> </"
+"imageobject>"
+
 #. type: Content of: <section><info><title>
-#: en/uninstall-Mageia.xml:3
+#: en/uninstall-Mageia.xml:10
 msgid "Uninstalling Mageia"
 msgstr "Odinstalování Mageii"
 
 #. type: Content of: <section><para>
-#: en/uninstall-Mageia.xml:9
+#: en/uninstall-Mageia.xml:18
 #, fuzzy
 msgid ""
 "If Mageia didn't convince you or you can't install it correctly - in short "
@@ -5145,13 +5401,13 @@ msgstr ""
 "možnost odinstalování. Toto neplatí u každého operačního systému."
 
 #. type: Content of: <section><para>
-#: en/uninstall-Mageia.xml:14
+#: en/uninstall-Mageia.xml:23
 #, fuzzy
 msgid ""
-"After your data backup, reboot your Mageia installation DVD and select "
-"<emphasis role=\"bold\">Rescue system</emphasis>, then, <emphasis role=\"bold"
-"\">Restore Windows boot loader</emphasis>. At the next boot, you will only "
-"have Windows, with no option to choose your operating system."
+"After backing up your data, reboot your Mageia installation DVD and select "
+"<emphasis>Rescue system</emphasis>, then <emphasis>Restore Windows boot "
+"loader</emphasis>. At the next boot, you will only have Windows, with no "
+"option to choose your Mageia operating system."
 msgstr ""
 "Po zazálohování si vašich dat, restartujte počítač s vaším instalačním DVD "
 "Mageii a vyberte Záchranný systém, potom, Obnovit zavaděč Windows. Při "
@@ -5159,15 +5415,18 @@ msgstr ""
 "systému."
 
 #. type: Content of: <section><para>
-#: en/uninstall-Mageia.xml:19
+#: en/uninstall-Mageia.xml:28
 #, fuzzy
 msgid ""
-"In Windows to recover the space used by Mageia partitions: click on "
-"<code>Start -> Control Panel -> Administrative Tools -> Computer Management -"
-"> Storage -> Disk Management</code>. You will recognize a Mageia partition "
-"because they are labeled <guilabel>Unknown</guilabel>, and also by their "
-"size and place on the disk. Right click on each of these partitions and "
-"select <guibutton>Delete</guibutton> to free up the space."
+"In Windows, to recover the space used by Mageia partitions: click on "
+"<menuchoice> <guimenu>Start</guimenu> <guimenuitem>Control Panel</"
+"guimenuitem> <guimenuitem>Administrative Tools</guimenuitem> "
+"<guimenuitem>Computer Management</guimenuitem> <guimenuitem>Storage</"
+"guimenuitem> <guimenuitem>Disk Management</guimenuitem> </menuchoice>. You "
+"will recognise a Mageia partition because they are labeled <literal>Unknown</"
+"literal>, and also by their size and place on the disk. Right-click on each "
+"of these partitions and select <emphasis>Delete</emphasis> to free up the "
+"space."
 msgstr ""
 "Pro obnovu místa použitého oddíly neboli diskovými oddíly Mageii ve Windows, "
 "klepněte na <code>Start → Ovládací panely → Nástroje na správu → Správa "
@@ -5178,16 +5437,17 @@ msgstr ""
 "guibutton>. Prostor bude uvolněn."
 
 #. type: Content of: <section><para>
-#: en/uninstall-Mageia.xml:27
+#: en/uninstall-Mageia.xml:46
+#, fuzzy
 msgid ""
 "If you are using Windows XP, you can create a new partition and format it "
-"(FAT32 or NTFS). It will get a partition letter."
+"(FAT32 or NTFS). It will then get a partition letter."
 msgstr ""
 "Pokud používáte Windows XP, můžete vytvořit nový oddíl a naformátovat jej "
 "(FAT32 nebo NTFS). Bude mu přiřazeno písmeno oddílu."
 
 #. type: Content of: <section><para>
-#: en/uninstall-Mageia.xml:30
+#: en/uninstall-Mageia.xml:49
 #, fuzzy
 msgid ""
 "If you have Vista or 7, you have one more possibility, you can extend the "
@@ -5203,34 +5463,50 @@ msgstr ""
 "opatrní a ujistěte se, že všechny důležité věci byly zazálohovány."
 
 #. type: Content of: <section><info><title>
-#: en/unused.xml:9
+#: en/unused.xml:3
 msgid "Keep or delete unused material"
 msgstr "Ponechat nebo smazat nepoužitý materiál"
 
+#. 2018/03/03 apb: Adjusted text and updated SC's to Mga6.
 #. type: Content of: <section><mediaobject>
-#: en/unused.xml:13
+#: en/unused.xml:9
+#, fuzzy
 msgid ""
-"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
-"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"
+"<imageobject> <imagedata format=\"PNG\" xml:id=\"unused-im1\" fileref=\"live-"
+"unused.png\" align=\"center\" revision=\"1\"/> </imageobject>"
 msgstr ""
-"<imageobject> <imagedata align=\"center\" fileref=\"live-unused.png\" format="
-"\"PNG\" revision=\"1\" xml:id=\"unused-im1\"/> </imageobject>"
+"<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref=\"live-"
+"reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/unused.xml:19
+#: en/unused.xml:14
+#, fuzzy
 msgid ""
 "In this step, the installer looks for unused locales packages and unused "
-"hardware packages. Then it proposes you to delete them. It is a good idea to "
-"accept, except if you prepare an installation which has to run on different "
-"hardware."
+"hardware packages and you are then given an opportunity to delete them."
 msgstr ""
 "V tomto kroku instalátor hledá nevyužité jazykové balíčky a nevyužité "
 "hardwarové balíčky. Potom vám navrhne jejich vymazání. Je dobrou myšlenkou "
 "přijmout to, kromě případu, že připravujete instalaci, která má běžet na "
 "odlišném počítačovém vybavení."
 
+#. type: Content of: <section><para>
+#: en/unused.xml:18
+msgid ""
+"If you do not foresee a case where your installation may need to run on "
+"different hardware, or that you might need additional localization files "
+"then you might wish to accept this proposal."
+msgstr ""
+
+#. type: Content of: <section><para>
+#: en/unused.xml:22
+msgid ""
+"Clicking <emphasis>Advanced</emphasis> will list the unused hardware and "
+"localization files that will be removed if you proceed."
+msgstr ""
+
 #. type: Content of: <section><mediaobject>
-#: en/unused.xml:25
+#: en/unused.xml:26
 msgid ""
 "<imageobject> <imagedata fileref=\"../live-unused-InstallationProgress.png\"/"
 "> </imageobject>"
@@ -5239,14 +5515,780 @@ msgstr ""
 "> </imageobject>"
 
 #. type: Content of: <section><para>
-#: en/unused.xml:30
+#: en/unused.xml:31
+#, fuzzy
 msgid ""
-"The next step is the copying of files on hard disk. This takes some minutes. "
-"At the end, you get a blank screen for some time, it's normal."
+"The next step is the copying of files to hard disk. This process should just "
+"take a little while to complete. When it is finising you will briefly get a "
+"blank screen - this is normal."
 msgstr ""
 "Dalším krokem je kopírování souborů na pevný disk. Toto zabere několik "
 "minut. Na konci dostanete na určitý čas prázdnou obrazovku. To je normální."
 
+#~ msgid "User and Superuser Management"
+#~ msgstr "Správa uživatele  a superuživatele"
+
+#, fuzzy
+#~ msgid ""
+#~ "Every partition is shown to the left as: <emphasis role=\"bold\">Device "
+#~ "(capacity, mount point, type).</emphasis>"
+#~ msgstr ""
+#~ "Každý oddíl je zobrazen takto: \"Zařízení\" (\"Kapacita\", \"Přípojný bod"
+#~ "\", \"Typ\")."
+
+#~ msgid "In advanced tab, you will find more options about clock settings."
+#~ msgstr "Na kartě pokročilé najdete víc voleb pro nastavení času."
+
+#~ msgid "From a disc"
+#~ msgstr "Z disku"
+
+#~ msgid ""
+#~ "You can boot directly from the media you used to burn your image (CD-ROM, "
+#~ "DVD-ROM...). You usually just need to insert it in your CD/DVD drive for "
+#~ "the bootloader to launch the installation automatically after rebooting "
+#~ "the computer. If that does not happen you may need to reconfigure your "
+#~ "BIOS or press one key that will offer you to choose the peripheral from "
+#~ "which the computer will boot."
+#~ msgstr ""
+#~ "Systém můžete zavést z nosiče, na který jste vypálili svůj obrazový "
+#~ "soubor (CD, DVD...). Obyčejně jej stačí jen vložit do vaší CD/DVD "
+#~ "mechaniky, aby zavaděč spustil instalaci automaticky po restartu "
+#~ "počítače. pokud se to nestane, možná potřebujete přenastavit BIOS anebo "
+#~ "stisknout jednu klávesu, která vám nabídne vybrat si zařízení, ze kterého "
+#~ "se počítač zavede."
+
+#~ msgid ""
+#~ "According to which hardware you have, and how it is configured, you get "
+#~ "either one or another of the two screens below."
+#~ msgstr ""
+#~ "Podle toho, jaké máte vybavení počítače a jak je nastaveno, objeví se buď "
+#~ "jedna anebo druhá ze dvou níže uvedených obrazovek."
+
+#~ msgid "From a USB device"
+#~ msgstr "Ze zařízení USB"
+
+#~ msgid ""
+#~ "You can boot from the USB device on which you dumped your image ISO. "
+#~ "According to your BIOS settings, the computer boots perhaps directly on "
+#~ "the USB device already plugged in a port. If that does not happen you may "
+#~ "need to reconfigure your BIOS or press one key that will offer you to "
+#~ "choose the peripheral from which the computer will boot."
+#~ msgstr ""
+#~ "Počítač můžete spustit ze zařízení USB, na kterém je zaznamenán obraz "
+#~ "ISO. Vzhledem k nastavení vašeho BIOSu se počítač možná už zavádí přímo "
+#~ "ze zařízení USB zastrčeného v přípojném místě (portu) počítače. Pokud se "
+#~ "tak neděje, možná potřebujete přenastavit BIOS anebo stisknout jednu "
+#~ "klávesu, která vám nabídne výběr zařízení, z něhož se počítač spustí."
+
+#~ msgid ""
+#~ "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>"
+#~ msgstr ""
+#~ "<imageobject><imagedata fileref=\"../live-bootCSM.png\"/></imageobject>"
+
+#~ msgid "In the middle menu, you have the choice between three actions:"
+#~ msgstr "V prostřední nabídce máte volbu mezi třemi činnostmi:"
+
+#~ msgid ""
+#~ "Boot from hard disk: This choice allows to boot from hard disk, as usual, "
+#~ "when no media (CD/DVD or USB stick) is connected. (not working with "
+#~ "Mageia 5)."
+#~ msgstr ""
+#~ "Spustit z pevného disku: Tato volba dovoluje systém zavést z pevného "
+#~ "disku, tak jako obyčejně, když není připojen žádný datový nosič (CD/DVD "
+#~ "anebo zařízení USB). (nepracuje s Mageiou 5)."
+
+#~ msgid "In the bottom menu, are the Boot Options:"
+#~ msgstr "Ve spodní nabídce jsou Volby zavedení systému:"
+
+#~ msgid ""
+#~ "F1 - Help. Explain the options \"splash\", \"apm\", \"acpi\" and \"Ide\""
+#~ msgstr ""
+#~ "F1 - Nápověda. Vysvětluje volby \"splash\", \"apm\", \"acpi\" a \"Ide\""
+
+#~ msgid "F2 - Language. Choose the display language of the screens."
+#~ msgstr "F2 - Jazyk. Vyberte si pro zobrazení jazyka obrazovek."
+
+#~ msgid ""
+#~ "F3 - Screen resolution. Choose between text, 640x400, 800x600, 1024x728"
+#~ msgstr ""
+#~ "F3 - Rozlišení obrazovky. Volba mezi textem, 640x400, 800x600, 1024x728"
+
+#~ msgid ""
+#~ "F5 - Driver. Yes or No. The system is aware about the presence of an "
+#~ "optional disk with a driver update and will require its insertion during "
+#~ "installation process."
+#~ msgstr ""
+#~ "F5 - Ovladač. Ano nebo Ne. Systém si je vědom přítomnosti volitelného "
+#~ "disku s aktualizací ovladače a bude požadovat jeho vložení během procesu "
+#~ "instalace."
+
+#~ msgid ""
+#~ "F6 - Kernel options. This is a way to specify options according to your "
+#~ "hardware and the drivers to use."
+#~ msgstr ""
+#~ "F6 - Volby jádra. Toto je cesta pro zadání voleb vztahujících se k "
+#~ "vybavení počítače a ovladačům, které se použijí."
+
+#~ msgid "First screen while booting on UEFI system from disk"
+#~ msgstr "První obrazovka během spuštění z disku na systémech UEFI"
+
+#~ msgid ""
+#~ "You have only the choice to run Mageia in Live mode (first choice)  or to "
+#~ "process the installation (second choice)."
+#~ msgstr ""
+#~ "Zde máte jen možnost spustit Mageiu v Živém režimu (první volba) nebo "
+#~ "spustit instalaci (druhá volba)."
+
+#~ msgid ""
+#~ "In each case, the first steps will be the same to choose language, "
+#~ "timezone and keyboard, then the processes differ, with <link linkend="
+#~ "\"testing\">additional steps in Live mode</link>."
+#~ msgstr ""
+#~ "V každém případě budou první kroky stejné - vybrat si jazyk, časovou zónu "
+#~ "a klávesnici; potom se postupy odlišují v <link linkend=\"testing"
+#~ "\">dodatečných krocích v Živém režimu</link>."
+
+#, fuzzy
+#~ msgid ""
+#~ "Depending on your selection here, you may be offered further screens to "
+#~ "fine-tune your choice."
+#~ msgstr ""
+#~ "V závislosti na vašem výběru zde, vám můžou být nabídnuty další obrazovky "
+#~ "pro jemné doladění vaší volby."
+
+#, fuzzy
+#~ msgid "The settings DrakX chose are usually good."
+#~ msgstr "Nastavení, která DrakX vybral, jsou obyčejně dobrá."
+
+#, fuzzy
+#~ msgid ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_card_list-"
+#~ "im1\" align=\"center\" fileref=\"dx2-configureX_card_list.png\" revision="
+#~ "\"1\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"summaryBottom-im1\" "
+#~ "align=\"center\" fileref=\"dx2-summaryBottom.png\" revision=\"1\"/> </"
+#~ "imageobject>"
+
+#, fuzzy
+#~ msgid ""
+#~ "The <emphasis role=\"bold\">Nonfree</emphasis> repository needs to be "
+#~ "explicitly enabled to access them. If you didn't enable it previously, "
+#~ "you should do this after your first reboot."
+#~ msgstr ""
+#~ "Přístup k Nonfree úložišti musí být výslovně povolen. Pokud tomu tak "
+#~ "není, nejdříve jej povolte, toto byste měli udělat po prvním restartu."
+
+#, fuzzy
+#~ msgid ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_chooser-im1\" "
+#~ "fileref=\"dx2-configureX_chooser.png\" align=\"center\" revision=\"1\"/> "
+#~ "</imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref="
+#~ "\"live-reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"
+
+#~ msgid ""
+#~ "<emphasis><guibutton>Graphic card</guibutton></emphasis>: Choose your "
+#~ "card from the list if needed."
+#~ msgstr ""
+#~ "<emphasis><guibutton>Grafická karta</guibutton></emphasis>: Vyberte ze "
+#~ "seznamu vaši kartu, pokud je to třeba."
+
+#~ msgid "Incorrect refresh rates may damage your monitor"
+#~ msgstr "Nesprávná obnovovací frekvence může poškodit váš monitor"
+
+#, fuzzy
+#~ msgid ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"configureX_monitor-im1\" "
+#~ "fileref=\"dx2-configureX_monitor.png\" align=\"center\" revision=\"1\"/> "
+#~ "</imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"reboot-im1\" fileref="
+#~ "\"live-reboot.png\" align=\"center\" revision=\"1\"/> </imageobject>"
+
+#~ msgid "<emphasis>Custom</emphasis>"
+#~ msgstr "<emphasis>Vlastní</emphasis>"
+
+#~ msgid "<emphasis>Plug 'n Play</emphasis>"
+#~ msgstr "<emphasis>Plug 'n Play</emphasis>"
+
+#~ msgid "the monitor manufacturers name"
+#~ msgstr "název výrobce monitoru"
+
+#~ msgid "the monitor description"
+#~ msgstr "popis monitoru"
+
+#~ msgid ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake."
+#~ "png\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
+#~ "<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </"
+#~ "imageobject>"
+#~ msgstr ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-diskdrake."
+#~ "png\" align=\"center\"/> </imageobject> <imageobject condition=\"live\"> "
+#~ "<imagedata fileref=\"live-diskdrake.png\" align=\"center\"/> </"
+#~ "imageobject>"
+
+#~ msgid "Click <guibutton>Done</guibutton> when you're ready."
+#~ msgstr ""
+#~ "Klepněte na tlačítko <guibutton>Hotovo</guibutton>, když jste připraven."
+
+#~ msgid ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" "
+#~ "align=\"center\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" "
+#~ "align=\"center\"/> </imageobject>"
+
+#~ msgid "Use Free Space"
+#~ msgstr "Použít volné místo"
+
+#~ msgid "Use Free Space on a Windows Partition"
+#~ msgstr "Použít volné místo na oddílu Windows"
+
+#~ msgid ""
+#~ "If you have unused space on an existing Windows partition, the installer "
+#~ "may offer to use it."
+#~ msgstr ""
+#~ "Pokud máte nevyužité místo na stávajícím windowsovském oddíle, instalátor "
+#~ "může nabídnout jeho použití."
+
+#, fuzzy
+#~ msgid ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "doPartitionDisks2.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks2.png\" "
+#~ "align=\"center\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "doPartitionDisks.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata fileref=\"live-doPartitionDisks.png\" "
+#~ "align=\"center\"/> </imageobject>"
+
+#~ msgid "Erase and use Entire Disk."
+#~ msgstr "Smazat a použít celý disk"
+
+#~ msgid ""
+#~ "Note! This will erase ALL data on the selected hard drive. Take care!"
+#~ msgstr "Pozor, toto smaže všechna data na vybraném disku. Buďte opatrní!"
+
+#~ msgid "Custom disk partitioning"
+#~ msgstr "Vlastní rozdělení disku"
+
+#, fuzzy
+#~ msgid ""
+#~ "That means that from 160 GB or greater available space, the installer "
+#~ "will create three partitions: 50 GB for <emphasis role=\"bold\">/</"
+#~ "emphasis>, 4 GB for <emphasis role=\"bold\">swap</emphasis> and the "
+#~ "remainder for <emphasis role=\"bold\">/home</emphasis>."
+#~ msgstr ""
+#~ "To znamená, že v případě 160 GB a víc z dostupného místa, instalátor "
+#~ "vytvoří tři oddíly: 50 GB pro /, 4 GB pro swap a zbytek pro adresář /home."
+
+#~ msgid ""
+#~ "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+#~ "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition="
+#~ "\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </"
+#~ "imageobject>"
+#~ msgstr ""
+#~ "<imageobject condition=\"classical\"> <imagedata align=\"center\" fileref="
+#~ "\"dx2-doPartitionDisks3.png\"/> </imageobject> <imageobject condition="
+#~ "\"live\"> <imagedata fileref=\"live-doPartitionDisks3.png\"/> </"
+#~ "imageobject>"
+
+#~ msgid "January 2015"
+#~ msgstr "Leden 2015"
+
+#~ msgid ""
+#~ "<imageobject> <imagedata fileref=\"mageia-2013.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"../mageia-2013.png\"/> </imageobject>"
+
+#~ msgid "Using a Mageia DVD"
+#~ msgstr "Použití DVD Mageia"
+
+#, fuzzy
+#~ msgid ""
+#~ "Here are the default welcome screens when using a Mageia DVD, The first "
+#~ "one is what you will see if you have a UEFI system, the second one is for "
+#~ "a Legacy system:"
+#~ msgstr ""
+#~ "Zde jsou výchozí uvítací obrazovky při používaní DVD Mageia. První je se "
+#~ "systémem UEFI a druhá se zastaralým systémem:"
+
+#~ msgid ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome2.png\"/> </imageobject>"
+
+#~ msgid "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome.png\"/> </imageobject>"
+
+#~ msgid ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome-lang.png\"/> </imageobject>"
+
+#, fuzzy
+#~ msgid ""
+#~ "Use the arrow keys to select the language then press <emphasis role=\"bold"
+#~ "\">Enter</emphasis>."
+#~ msgstr ""
+#~ "Použijte šipkové klávesy pro výběr jazyka a stiskněte klávesu Enter."
+
+#~ msgid ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome5def.png\"/> </imageobject>"
+
+#, fuzzy
+#~ msgid "Default: It doesn't alter anything in the default options."
+#~ msgstr "- Výchozí, tato nemění nic ve výchozích volbách."
+
+#~ msgid ""
+#~ "When you select one of these entries, it modifies the default options "
+#~ "displayed in the <guilabel>Boot Options</guilabel> line."
+#~ msgstr ""
+#~ "Když si vyberete jednu z těchto položek, tato změní výchozí volby "
+#~ "zobrazené v řádku <guilabel>Volby zavádění systému</guilabel>."
+
+#, fuzzy
+#~ msgid ""
+#~ "In some Mageia releases, it may happen that the entries selected with "
+#~ "<emphasis role=\"bold\">F6</emphasis> do not appear in the <guilabel>Boot "
+#~ "Options</guilabel> line, despite this, they will in fact be applied."
+#~ msgstr ""
+#~ "V některých vydáních Mageii se může stát, že se položky vybrané klávesou "
+#~ "F6 neobjevují v řádku <guilabel>Volby zavádění systému</guilabel>, avšak "
+#~ "ve skutečnosti jsou brány do úvahy."
+
+#~ msgid ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcome6opt.png\"/> </imageobject>"
+
+#, fuzzy
+#~ msgid ""
+#~ "Pressing <emphasis role=\"bold\">F1</emphasis> opens a help window for "
+#~ "various boot options. Select an item with the arrow keys and press "
+#~ "<emphasis role=\"bold\">Enter</emphasis> for more details or press "
+#~ "<emphasis role=\"bold\">Esc</emphasis> to go back to the welcome screen."
+#~ msgstr ""
+#~ "Stisknutí klávesy F1 otevře nové okno s dalšími dostupnými volbami. "
+#~ "Vyberte jednu šipkovými klávesami a stiskněte klávesu Enter pro obdržení "
+#~ "více podrobností nebo stiskněte klávesu Esc pro návrat na uvítací "
+#~ "obrazovku."
+
+#~ msgid ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcomeHelp1.png\"/> </imageobject>"
+
+#, fuzzy
+#~ msgid ""
+#~ "The detailed view about the splash option. Press <emphasis role=\"bold"
+#~ "\">Esc</emphasis> or select <guilabel>Return to Boot Options</guilabel> "
+#~ "to go back to the options list. These options can be added by hand in the "
+#~ "<guilabel>Boot Options</guilabel> line."
+#~ msgstr ""
+#~ "Podrobný přehled o rozsahu voleb. Stiskněte Esc nebo zvolte "
+#~ "<guilabel>návrat k parametrům spuštění</guilabel> pro návrat zpět do "
+#~ "seznamu voleb. Tyto volby mohou být přidány ručně v řádku <guilabel>Volby "
+#~ "zavádění systému</guilabel>."
+
+#~ msgid ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"dx-welcomeHelp2.png\"/> </imageobject>"
+
+#, fuzzy
+#~ msgid ""
+#~ "The help is translated in the chosen language with <emphasis role=\"bold"
+#~ "\">F2</emphasis>."
+#~ msgstr "Nápověda je přeložena ve zvoleném jazyku pomocí klávesy F2."
+
+#~ msgid ""
+#~ "For more information about kernel options on legacy and UEFI systems, "
+#~ "see: <link ns2:href=\"https://wiki.mageia.org/en/"
+#~ "How_to_set_up_kernel_options\">https://wiki.mageia.org/en/"
+#~ "How_to_set_up_kernel_options</link>"
+#~ msgstr ""
+#~ "Pro více informací o volbách pro kernel na zastaralých systémech a "
+#~ "systémech UEFI se podívejte na: <link ns2:href=\"https://wiki.mageia.org/"
+#~ "en/How_to_set_up_kernel_options\">https://wiki.mageia.org/en/"
+#~ "How_to_set_up_kernel_options</link>"
+
+#~ msgid "Media Selection (Nonfree)"
+#~ msgstr "Výběr zdrojů (Nonfree)"
+
+#, fuzzy
+#~ msgid ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"media_selection-im1\" "
+#~ "align=\"center\" revision=\"1\" fileref=\"dx2-media_selection.png\"/> </"
+#~ "imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" "
+#~ "align=\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </"
+#~ "imageobject>"
+
+#~ msgid "Summary of miscellaneous parameters"
+#~ msgstr "Souhrn různých parametrů"
+
+#~ msgid "<guilabel>Timezone</guilabel>"
+#~ msgstr "<guilabel>Časové pásmo</guilabel>"
+
+#~ msgid "<guilabel>Country / Region</guilabel>"
+#~ msgstr "<guilabel>Země/Oblast</guilabel>"
+
+#~ msgid "<guilabel>Bootloader</guilabel>"
+#~ msgstr "<guilabel>Zavaděč</guilabel>"
+
+#~ msgid "For more information, see <xref linkend=\"setupBootloader\"/>"
+#~ msgstr ""
+#~ "Pro více informací se podívejte na <xref linkend=\"setupBootloader\"/>"
+
+#~ msgid "<guilabel>User management</guilabel>"
+#~ msgstr "<guilabel>Správa uživatelů</guilabel>"
+
+#~ msgid "<guilabel>Services</guilabel>:"
+#~ msgstr "<guilabel>Služby</guilabel>:"
+
+#~ msgid "For more information, see <xref linkend=\"configureServices\"/>"
+#~ msgstr ""
+#~ "Pro více informací se podívejte na <xref linkend=\"configureServices\"/>"
+
+#~ msgid "<guilabel>Keyboard</guilabel>:"
+#~ msgstr "<guilabel>Klávesnice</guilabel>:"
+
+#~ msgid "<guilabel>Mouse</guilabel>:"
+#~ msgstr "<guilabel>Myš</guilabel>:"
+
+#~ msgid "<guilabel>Sound card</guilabel>:"
+#~ msgstr "<guilabel>Zvuková karta</guilabel>:"
+
+#, fuzzy
+#~ msgid ""
+#~ "The installer uses the default driver - if there is a default one. The "
+#~ "option to select a different driver is only given when there is more than "
+#~ "one driver for your card, but where none of them is the default one."
+#~ msgstr ""
+#~ "Instalátor používá výchozí ovladač, pokud nějaký výchozí existuje. "
+#~ "Možnost výběru odlišného ovladače je dána jen tehdy, když je více než "
+#~ "jeden ovladač pro vaši kartu, ale žádný z nich není výchozí."
+
+#~ msgid "<guilabel>Graphical interface</guilabel>:"
+#~ msgstr "<guilabel>Grafické rozhraní</guilabel>:"
+
+#~ msgid "<guilabel>Network</guilabel>:"
+#~ msgstr "<guilabel>Síť</guilabel>:"
+
+#~ msgid "<guilabel>Proxies</guilabel>:"
+#~ msgstr "<guilabel>Proxy</guilabel>:"
+
+#~ msgid "<guilabel>Security Level</guilabel>:"
+#~ msgstr "<guilabel>Úroveň bezpečnosti</guilabel>:"
+
+#~ msgid "Check the option which best suits your usage."
+#~ msgstr "Zaškrtněte volbu, která se nejlépe hodí k vašemu používání."
+
+#~ msgid "<guilabel>Firewall</guilabel>:"
+#~ msgstr "<guilabel>Firewall</guilabel>:"
+
+#~ msgid ""
+#~ "A firewall is intended to be a barrier between your important data and "
+#~ "the rascals out there on the internet who would compromise or steal it."
+#~ msgstr ""
+#~ "Firewall, moravsky ohnivá zeď, má sloužit jako překážka mezi vašimi "
+#~ "důležitými daty a ničemy venku na internetu, kteří by je chtěli vyzradit "
+#~ "nebo ukradnout."
+
+#~ msgid ""
+#~ "Select the services that you wish to have access to your system. Your "
+#~ "selections will depend on what you use your computer for. For more "
+#~ "information, see <xref linkend=\"firewall\"/>."
+#~ msgstr ""
+#~ "Vyberte si služby, které si přejete, aby měly přístup k vašemu systému. "
+#~ "Vaše výběry budou záležet na tom, k čemu používáte váš počítač. Další "
+#~ "informace najdete na <xref linkend=\"firewall\"/>."
+
+#, fuzzy
+#~ msgid ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"securityLevel-im1\" "
+#~ "align=\"center\" fileref=\"dx2-securityLevel.png\" revision=\"1\"/> </"
+#~ "imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata format=\"PNG\" xml:id=\"selectCountry-im1\" "
+#~ "align=\"center\" fileref=\"dx2-selectCountry.png\" revision=\"1\"/> </"
+#~ "imageobject>"
+
+#~ msgid "64 bit architecture only."
+#~ msgstr "Pouze 64 bitová architektura."
+
+#, fuzzy
+#~ msgid ""
+#~ "md5sum and sha1sum are tools to check the ISO integrity. Choose one or "
+#~ "the other, and copy the checksum <link linkend=\"integrity\">for later "
+#~ "use</link>. Then a window similar to this one appears:"
+#~ msgstr ""
+#~ "md5sum a sha1sum jsou nástroje ke zkontrolování neporušenosti souboru "
+#~ "ISO. Jeden z nich si ponechejte <link linkend=\"integrity\">pro budoucí "
+#~ "použití</link>. Potom se objeví tomuto podobné okno:"
+
+#~ msgid ""
+#~ "To recover the original capacity, you must redo partitioning and re-"
+#~ "format the USB stick."
+#~ msgstr ""
+#~ "Pro obnovu původní kapacity, musíte znovu předělat oddíl zařízení USB a "
+#~ "naformátovat ho."
+
+#~ msgid "Install"
+#~ msgstr "Instalace"
+
+#~ msgid "Upgrade"
+#~ msgstr "Aktualizace"
+
+#, fuzzy
+#~ msgid ""
+#~ "If during install you decide to stop the installation, it is possible to "
+#~ "reboot, but please think twice before you do this. Once a partition has "
+#~ "been formatted or updates have started to be installed, your computer "
+#~ "isn't in the same state anymore and rebooting it could very well leave "
+#~ "you with an unusable system. If in spite of that, and only if you are "
+#~ "very sure rebooting is what you want, go to a text terminal by pressing "
+#~ "<guilabel>Alt Ctrl F2</guilabel> simultaneously. After that, press "
+#~ "<guilabel>Alt Ctrl Delete</guilabel> simultaneously to reboot."
+#~ msgstr ""
+#~ "Pokud se během instalace rozhodnete instalaci zastavit, je možné "
+#~ "restartovat počítač, ale dříve než toto uděláte, si to prosím důkladně "
+#~ "zvažte. Když už byl oddíl jednou naformátován nebo se začaly instalovat "
+#~ "aktualizace, váš počítač už nadále není ve stejném stavu a jeho "
+#~ "restartování by vás mohlo velmi lehce zanechat s nepoužitelným systémem. "
+#~ "Pokud si jste přesto přese všechno velmi jistí, že restartování je to, co "
+#~ "chcete, jděte do textového terminálu současným stisknutím tří kláves "
+#~ "<guilabel>Alt+Ctrl+F2</guilabel>. Potom současně stiskněte <guilabel>Alt"
+#~ "+Ctrl+Delete</guilabel> pro restart."
+
+#~ msgid ""
+#~ "<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" "
+#~ "align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </"
+#~ "imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata xml:id=\"selectKeyboardLive-im1\" revision=\"1\" "
+#~ "align=\"center\" format=\"PNG\" fileref=\"live-selectKeyboard.png\"/> </"
+#~ "imageobject>"
+
+#~ msgid ""
+#~ "You will be required to set the keyboard layout you wish to use in Mageia​​"
+#~ ". The default one is selected according to your language and timezone "
+#~ "previously selected."
+#~ msgstr ""
+#~ "Budete si muset vybrat rozložení klávesnice, které si přejete používat v "
+#~ "Mageii. Výchozí je vybrána přiměřeně k vašemu jazyku a předchozí vybrané "
+#~ "časové oblasti."
+
+#~ msgid "Mageia uses UTF-8 (Unicode) support by default."
+#~ msgstr "Mageia používá jako výchozí podporu pro UTF-8 (Unicode)."
+
+#~ msgid ""
+#~ "<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
+#~ "format=\"PNG\" > </imagedata> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata fileref=\"dx2-selectMouse.png\" align=\"center\" "
+#~ "format=\"PNG\" > </imagedata> </imageobject>"
+
+#~ msgid "By default, Mageia uses exclusively:"
+#~ msgstr "Ve výchozím stavu Mageia používá výhradně:"
+
+#, fuzzy
+#~ msgid "GRUB2-efi for a UEFI system."
+#~ msgstr "Grub2-efi pro UEFI systémy."
+
+#~ msgid "The Mageia graphical menus are nice :)"
+#~ msgstr "Grafické nabídky Mageii jsou hezké :)"
+
+#~ msgid ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref="
+#~ "\"live-setupBootloader.png\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "setupBootloader.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata xml:id=\"setupBootloader-im1\" fileref="
+#~ "\"live-setupBootloader.png\"/> </imageobject>"
+
+#, fuzzy
+#~ msgid ""
+#~ "Don't modify the <emphasis role=\"bold\">Boot Device</emphasis> unless "
+#~ "you really know what you are doing."
+#~ msgstr ""
+#~ "Neupravujte \"Zaváděcí zařízení\", pokud s jistotou nevíte, co děláte."
+
+#, fuzzy
+#~ msgid ""
+#~ "With a UEFI system, the user interface is slightly different as you "
+#~ "cannot choose between the <emphasis role=\"bold\">with</emphasis> or "
+#~ "<emphasis role=\"bold\">without graphical menu</emphasis> options."
+#~ msgstr ""
+#~ "Se systémem UEFI je uživatelské rozhraní trochu odlišné, protože si "
+#~ "nemůžete volit postup s nebo bez grafické nabídky"
+
+#~ msgid ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </"
+#~ "imageobject>"
+#~ msgstr ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "setupBootloader2.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata fileref=\"live-setupBootloader2.png\"/> </"
+#~ "imageobject>"
+
+#, fuzzy
+#~ msgid ""
+#~ "By default, and according to your system, Mageia writes one of the "
+#~ "following:"
+#~ msgstr "Ve výchozím nastavení, podle systému, zapíše Mageia nový:"
+
+#, fuzzy
+#~ msgid "a GRUB2-efi bootloader into the ESP"
+#~ msgstr "Grub2-efi zavaděč do ESP"
+
+#~ msgid ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" "
+#~ "align=\"center\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject condition=\"classical\"> <imagedata fileref=\"dx2-"
+#~ "setupBootloader4.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"live\"> <imagedata fileref=\"live-setupBootloader4.png\" "
+#~ "align=\"center\"/> </imageobject>"
+
+#~ msgid ""
+#~ "You will get a warning that the bootloader is missing, ignore it by "
+#~ "clicking <guibutton>OK</guibutton>."
+#~ msgstr ""
+#~ "Dostanete varování, že chybí zavaděč. Nevšímejte si toho a klepněte na "
+#~ "<guibutton>OK</guibutton>."
+
+#~ msgid "First page"
+#~ msgstr "První strana"
+
+#~ msgid "<guilabel>Advanced</guilabel>"
+#~ msgstr "<guilabel>Pokročilé</guilabel>"
+
+#~ msgid "Next page"
+#~ msgstr "Další strana"
+
+#~ msgid ""
+#~ "<guilabel>Probe foreign OS</guilabel>: see above <link linkend="
+#~ "\"setupMageiaBootloader\">Using a Mageia bootloader</link>"
+#~ msgstr ""
+#~ "<guilabel>Vyzkoušet cizí operační systém</guilabel>: viz výše <link "
+#~ "linkend=\"setupMageiaBootloader\">Používat Mageiin zavaděč</link>"
+
+#, fuzzy
+#~ msgid ""
+#~ "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-setupSCSI.png\" "
+#~ "align=\"center\" xml:id=\"setupSCSI-im1\" revision=\"1\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject><imagedata format=\"PNG\" fileref=\"../live-bootUEFI.png\" "
+#~ "align=\"center\" xml:id=\"bootUEFI-im1\" revision=\"1\"/></imageobject>"
+
+#~ msgid "DrakX should then be able to configure the drive(s) correctly."
+#~ msgstr "DrakX by pak měl být schopen správně nastavit disk(y)."
+
+#~ msgid ""
+#~ "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" "
+#~ "xml:id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject> <imagedata format=\"PNG\" fileref=\"dx2-soundConfig.png\" "
+#~ "xml:id=\"soundConfig-im1\" revision=\"1\"/> </imageobject>"
+
+#, fuzzy
+#~ msgid ""
+#~ "In this screen the name of the driver that the installer chose for your "
+#~ "sound card is given, which will be the default driver if one exists."
+#~ msgstr ""
+#~ "Na této obrazovce je udán název ovladače, který zvolil instalátor pro "
+#~ "vaši zvukovou kartu, což bude výchozí ovladač, pokud máte některý určen "
+#~ "jako výchozí."
+
+#~ msgid ""
+#~ "The default driver should work without problems. However, if after "
+#~ "install you do encounter problems, then run <command>draksound</command> "
+#~ "or start this tool via MCC (Mageia Control Center), by choosing the "
+#~ "<guilabel>Hardware</guilabel> tab and clicking on <guilabel>Sound "
+#~ "Configuration</guilabel> at the top right of the screen."
+#~ msgstr ""
+#~ "Výchozí ovladač by měl pracovat bez problémů. Avšak, pokud se po "
+#~ "instalaci střetáváte s problémy, potom spustěte příkaz "
+#~ "<command>draksound</command> nebo spustěte tento nástroj přes nabídku MCC "
+#~ "(Ovládací centrum Mageii), zvolením panelu <guilabel>Hardware</guilabel> "
+#~ "a klepnutím na <guilabel>Nastavení zvuku</guilabel> v horní pravé části "
+#~ "obrazovky."
+
+#, fuzzy
+#~ msgid ""
+#~ "Then, in the <emphasis role=\"bold\">draksound</emphasis> or <emphasis "
+#~ "role=\"bold\">Sound Configuration</emphasis> tool screen, click on "
+#~ "<guibutton>Troubleshooting</guibutton> to find useful advice about how to "
+#~ "solve the problem."
+#~ msgstr ""
+#~ "Potom na obrazovce draksound nebo nástroje na \"Nastavení zvuku\", "
+#~ "klepněte na <guibutton>Rozšíření</guibutton> a potom na <guibutton>Řešení "
+#~ "problémů</guibutton>, abyste našli velmi užitečnou radu o tom, jak "
+#~ "vyřešit problém."
+
+#, fuzzy
+#~ msgid ""
+#~ "Clicking <emphasis role=\"bold\"><guibutton>Advanced</guibutton></"
+#~ "emphasis> in this screen, during install, is useful if there is no "
+#~ "default driver and there are several drivers available, but you think the "
+#~ "installer selected the wrong one."
+#~ msgstr ""
+#~ "Klepnutí na <guibutton>Rozšíření</guibutton> na této obrazovce, během "
+#~ "instalace, je užitečné tehdy, pokud tu není žádný výchozí ovladač a je tu "
+#~ "dostupných více ovládačů, ale vy si myslíte, že instalátor vybral "
+#~ "nesprávný ovladač."
+
+#, fuzzy
+#~ msgid ""
+#~ "In that case you can select a different driver after clicking on "
+#~ "<emphasis role=\"bold\"><guibutton>Let me pick any driver</guibutton></"
+#~ "emphasis>."
+#~ msgstr ""
+#~ "V tom případě můžete zvolit odlišný ovladač po klepnutí na "
+#~ "<guibutton>Nechat mě vybrat jiný ovladač</guibutton>."
+
+#, fuzzy
+#~ msgid ""
+#~ "<imageobject condition=\"live\"> <imagedata format=\"PNG\" fileref=\"live-"
+#~ "takeOverHdConfirm.png\" align=\"center\"/> </imageobject> <imageobject "
+#~ "condition=\"classical\"> <imagedata format=\"PNG\" fileref=\"dx2-"
+#~ "takeOverHdConfirm.png\" align=\"center\"/> </imageobject>"
+#~ msgstr ""
+#~ "<imageobject condition='live'> <imagedata fileref=\"live-"
+#~ "takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </"
+#~ "imageobject> <imageobject condition='classical'> <imagedata fileref=\"dx2-"
+#~ "takeOverHdConfirm.png\" format=\"PNG\" align=\"center\" ></imagedata> </"
+#~ "imageobject>"
+
+#~ msgid ""
+#~ "You get this screen if you selected \"Boot Mageia\". If not, you get the "
+#~ "\"<link linkend=\"doPartitionDisks\">Partitioning</link> step\""
+#~ msgstr ""
+#~ "Tuto obrazovku dostanete, pokud jste si vybrali \"Zavést Mageiu\". Pokud "
+#~ "ne, tak dostanete krok \"<link linkend=\"doPartitionDisks\">Rozdělení "
+#~ "disku</link>\""
+
 #~ msgid ""
 #~ "<guilabel>Password (again)</guilabel>: Retype the user password into this "
 #~ "text box and drakx will check you have the same password in each of the "
@@ -5355,22 +6397,6 @@ msgstr ""
 #~ "</imagedata> </imageobject>"
 
 #~ msgid ""
-#~ "<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
-#~ "configureX_monitor.png\" format=\"PNG\" revision=\"1\" xml:id="
-#~ "\"configureX_monitor-im1\"/> </imageobject>"
-#~ msgstr ""
-#~ "<imageobject> <imagedata align=\"center\" fileref=\"dx2-"
-#~ "configureX_monitor.png\" format=\"PNG\" revision=\"1\" xml:id="
-#~ "\"configureX_monitor-im1\"/> </imageobject>"
-
-#~ msgid ""
-#~ "There is a tab for every detected hard disk or other storage device, like "
-#~ "an USB key. For example sda, sdb and sdc if there are three of them."
-#~ msgstr ""
-#~ "Je tam karta pro každý nalezený pevný disk nebo jiné úložné zařízení, "
-#~ "jako je zařízení USB. Například sda, sdb a sdc, pokud jsou připojena tři."
-
-#~ msgid ""
 #~ "<imageobject condition=\"classical\"><imagedata fileref=\"dx2-"
 #~ "doPartitionDisks2.png\" align=\"center\"/></imageobject><imageobject "
 #~ "condition=\"live\"><imagedata fileref=\"live-doPartitionDisks2.png\" "
@@ -5480,15 +6506,6 @@ msgstr ""
 #~ "imagedata> </imageobject>"
 
 #~ msgid ""
-#~ "<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection."
-#~ "png\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
-#~ "imageobject>"
-#~ msgstr ""
-#~ "<imageobject> <imagedata align=\"center\" fileref=\"dx2-media_selection."
-#~ "png\" format=\"PNG\" revision=\"1\" xml:id=\"media_selection-im1\"/> </"
-#~ "imageobject>"
-
-#~ msgid ""
 #~ "If selected, \"With X\" will also include IceWM as lightweight desktop "
 #~ "environment."
 #~ msgstr ""
@@ -5550,13 +6567,6 @@ msgstr ""
 #~ "\"center\" format=\"PNG\"></imagedata> </imageobject>"
 
 #~ msgid ""
-#~ "Use this option for a fresh <application>Mageia</application> "
-#~ "installation."
-#~ msgstr ""
-#~ "Použijte tuto volbu pro čerstvou instalaci <application>Mageii</"
-#~ "application>."
-
-#~ msgid ""
 #~ "If you have one or more <application>Mageia</application> installations "
 #~ "on your system, the installer will allow you to upgrade one of them to "
 #~ "the latest release."