# drakx messages in Simplified Chinese
# Danny Zeng <danny@zeng.com.cn>, 2000, 2002
# Jesse Kuang <kjx@mandriva.com>, 2002
# Shiyu Tang <shiyutang@netscape.net>, 2003, 2004
# Funda Wang <fundawang@linux.net.cn>, 2002, 2003, 2004, 2005
#
msgid ""
msgstr ""
"Project-Id-Version: DrakX 2006\n"
"POT-Creation-Date: 2005-09-19 21:17+0800\n"
"PO-Revision-Date: 2005-09-13 00:50+0800\n"
"Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
"Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
"MIME-Version: 1.0\n"
"Content-Type: text/plain; charset=UTF-8\n"
"Content-Transfer-Encoding: 8bit\n"
#: ../move/move.pm:292
#, c-format
msgid "Which USB key do you want to format?"
msgstr "您想要格式化哪个 USB 密钥闪存盘?"
#: ../move/move.pm:296
#, c-format
msgid ""
"You are about to format a USB device \"%s\". This will delete all data on "
"it.\n"
"Make sure that the selected device is the USB key you want to format. \n"
"We advise you to unplug all other USB storage devices while doing this "
"operation."
msgstr ""
"您即将格式化 USB 设备“%s”。这样删除上面的全部数据。\n"
"请确定选中设备是您想要格式化的 USB 闪存密钥盘。\n"
"我们建议您在执行此操作时拔掉其它的 USB 存储设备。"
#: ../move/move.pm:448 ../move/move.pm:460
#, c-format
msgid "Key is not writable"
msgstr "密钥盘写保护"
#: ../move/move.pm:450
#, c-format
msgid ""
"The USB key seems to have write protection enabled. Please\n"
"unplug it, remove write protection, and then plug it again."
msgstr "USB 密钥盘好像启用了写保护。请拔出该密钥盘, 去掉写保护, 然后重新插入。"
#: ../move/move.pm:452
#, c-format
msgid "Retry"
msgstr "重试"
#: ../move/move.pm:453 ../move/move.pm:497
#, c-format
msgid "Continue without USB key"
msgstr "不使用 USB 密钥盘"
#: ../move/move.pm:462
#, c-format
msgid ""
"The USB key seems to have write protection enabled, but we can not safely\n"
"unplug it now.\n"
"\n"
"\n"
"Click the button to reboot the machine, unplug it, remove write protection,\n"
"plug the key again, and launch Mandriva Move again."
msgstr ""
"USB 密钥盘好像启用了写保护, 但是现在无法安全拔出该密钥盘。\n"
"\n"
"\n"
"请单击按钮重新启动计算机, 拔出该密钥盘之后, 去掉写保护后再插入, \n"
"然后再次调用 Mandriva Move。"
#: ../move/move.pm:468 help.pm:409 install_steps_interactive.pm:1332
#, c-format
msgid "Reboot"
msgstr "重新启动"
#: ../move/move.pm:473
#, c-format
msgid ""
"Your USB key does not have any valid Windows (FAT) partitions.\n"
"We need one to continue (beside, it's more standard so that you\n"
"will be able to move and access your files from machines\n"
"running Windows). Please plug in an USB key containing a\n"
"Windows partition instead.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"您的 USB 密钥盘中没有有效的 Windows(FAT) 分区。而要继续使用此系\n"
"统, 必须存在这样一个分区。除此以外, FAT 分区还更加标准, 这样您就\n"
"能够从运行 Windows 的计算机中移动并访问您的文件了。请插入另外一\n"
"块含有 Windows 分区的 USB 密钥盘。\n"
"\n"
"\n"
"没有 USB 密钥盘, 您当然也可以继续 - 您仍然可以像普通的 Mandriva\n"
"操作系统一样使用 Mandriva Move。"
#: ../move/move.pm:483
#, c-format
msgid ""
"We did not detect any USB key on your system. If you\n"
"plug in an USB key now, Mandriva Move will have the ability\n"
"to transparently save the data in your home directory and\n"
"system wide configuration, for next boot on this computer\n"
"or another one. Note: if you plug in a key now, wait several\n"
"seconds before detecting again.\n"
"\n"
"\n"
"You may also proceed without an USB key - you'll still be\n"
"able to use Mandriva Move as a normal live Mandriva\n"
"Operating System."
msgstr ""
"我们没有在您的系统中检测到任何 USB 密钥盘。如果您现在插入一块这\n"
"样的盘的话, Mandriva Move 将可以将您主目录和系统级配置中的数据透\n"
"明的保存在该密钥盘中, 以备下次启动此计算机之用。注意: 如果您刚刚\n"
"插入了密钥盘, 请在再次检测之前稍等几秒。\n"
"\n"
"\n"
"没有 USB 密钥盘, 您当然也可以继续 - 您仍然可以像普通的 Mandriva\n"
"操作系统一样使用 Mandriva Move。"
#: ../move/move.pm:494
#, c-format
msgid "Need a key to save your data"
msgstr "需要密钥盘保存您的数据"
#: ../move/move.pm:496
#, c-format
msgid "Detect USB key again"
msgstr "再次检测 USB 密钥盘"
#: ../move/move.pm:517
#, c-format
msgid "Setting up USB key"
msgstr "设置 USB 密钥盘"
#: ../move/move.pm:517
#, c-format
msgid "Please wait, setting up system configuration files on USB key..."
msgstr "请稍候, 正在 USB 密钥盘上设置系统配置文件..."
#: ../move/move.pm:546
#, c-format
msgid "Enter your user information, password will be used for screensaver"
msgstr "请输入您的信息, 密码将会用于屏幕保护程序"
#: ../move/move.pm:556
#, c-format
msgid "Auto configuration"
msgstr "自动配置"
#: ../move/move.pm:556
#, c-format
msgid "Please wait, detecting and configuring devices..."
msgstr "请稍候, 正在检测并配置设备..."
#: ../move/move.pm:604 ../move/move.pm:660 ../move/move.pm:664
#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:113 diskdrake/interactive.pm:230
#: diskdrake/interactive.pm:243 diskdrake/interactive.pm:404
#: diskdrake/interactive.pm:422 diskdrake/interactive.pm:558
#: diskdrake/interactive.pm:563 diskdrake/smbnfs_gtk.pm:41 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:52 fsedit.pm:216 install_any.pm:1776
#: install_any.pm:1828 install_steps.pm:81 install_steps_interactive.pm:37
#: interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27
#: network/ndiswrapper.pm:42 network/ndiswrapper.pm:89
#: network/ndiswrapper.pm:101 network/netconnect.pm:845
#: network/netconnect.pm:944 network/netconnect.pm:948
#: network/netconnect.pm:952 network/netconnect.pm:957
#: network/netconnect.pm:1102 network/netconnect.pm:1106
#: network/netconnect.pm:1225 network/netconnect.pm:1230
#: network/netconnect.pm:1250 network/netconnect.pm:1404
#: network/thirdparty.pm:319 network/thirdparty.pm:326
#: network/thirdparty.pm:370 network/thirdparty.pm:372
#: network/thirdparty.pm:393 network/thirdparty.pm:417
#: printer/printerdrake.pm:244 printer/printerdrake.pm:251
#: printer/printerdrake.pm:276 printer/printerdrake.pm:422
#: printer/printerdrake.pm:427 printer/printerdrake.pm:440
#: printer/printerdrake.pm:450 printer/printerdrake.pm:514
#: printer/printerdrake.pm:686 printer/printerdrake.pm:690
#: printer/printerdrake.pm:772 printer/printerdrake.pm:1576
#: printer/printerdrake.pm:1624 printer/printerdrake.pm:1661
#: printer/printerdrake.pm:1706 printer/printerdrake.pm:1710
#: printer/printerdrake.pm:1724 printer/printerdrake.pm:1816
#: printer/printerdrake.pm:1897 printer/printerdrake.pm:1901
#: printer/printerdrake.pm:1905 printer/printerdrake.pm:1954
#: printer/printerdrake.pm:2012 printer/printerdrake.pm:2016
#: printer/printerdrake.pm:2030 printer/printerdrake.pm:2150
#: printer/printerdrake.pm:2154 printer/printerdrake.pm:2197
#: printer/printerdrake.pm:2272 printer/printerdrake.pm:2290
#: printer/printerdrake.pm:2299 printer/printerdrake.pm:2308
#: printer/printerdrake.pm:2319 printer/printerdrake.pm:2383
#: printer/printerdrake.pm:2478 printer/printerdrake.pm:3037
#: printer/printerdrake.pm:3321 printer/printerdrake.pm:3327
#: printer/printerdrake.pm:3891 printer/printerdrake.pm:3895
#: printer/printerdrake.pm:3899 printer/printerdrake.pm:4360
#: printer/printerdrake.pm:4601 printer/printerdrake.pm:4629
#: printer/printerdrake.pm:4706 printer/printerdrake.pm:4772
#: printer/printerdrake.pm:4892 standalone/drakTermServ:394
#: standalone/drakTermServ:464 standalone/drakTermServ:473
#: standalone/drakTermServ:774 standalone/drakTermServ:781
#: standalone/drakTermServ:802 standalone/drakTermServ:849
#: standalone/drakTermServ:1095 standalone/drakTermServ:1572
#: standalone/drakTermServ:1588 standalone/drakTermServ:1593
#: standalone/drakTermServ:1601 standalone/drakTermServ:1613
#: standalone/drakTermServ:1634 standalone/drakauth:36
#: standalone/drakbackup:498 standalone/drakbackup:612
#: standalone/drakbackup:1093 standalone/drakbackup:1125
#: standalone/drakbackup:1646 standalone/drakbackup:1802
#: standalone/drakbackup:2427 standalone/drakbackup:4116
#: standalone/drakbackup:4336 standalone/drakclock:124
#: standalone/drakconnect:676 standalone/drakconnect:680
#: standalone/drakconnect:685 standalone/drakconnect:700
#: standalone/drakfont:210 standalone/drakfont:223 standalone/drakfont:261
#: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
#: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
#: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:379
#: standalone/draksambashare:383 standalone/draksambashare:386
#: standalone/draksambashare:389 standalone/draksambashare:449
#: standalone/draksambashare:473 standalone/draksambashare:547
#: standalone/draksambashare:629 standalone/draksambashare:696
#: standalone/draksambashare:796 standalone/draksambashare:803
#: standalone/draksambashare:938 standalone/draksambashare:1129
#: standalone/draksambashare:1138 standalone/draksambashare:1147
#: standalone/draksambashare:1168 standalone/draksambashare:1177
#: standalone/draksambashare:1186 standalone/draksambashare:1206
#: standalone/draksambashare:1214 standalone/draksambashare:1226
#: standalone/draksplash:162 standalone/drakxtv:107
#: standalone/finish-install:49 standalone/logdrake:171
#: standalone/logdrake:440 standalone/logdrake:445 standalone/scannerdrake:59
#: standalone/scannerdrake:202 standalone/scannerdrake:261
#: standalone/scannerdrake:715 standalone/scannerdrake:726
#: standalone/scannerdrake:865 standalone/scannerdrake:876
#: standalone/scannerdrake:946 wizards.pm:95 wizards.pm:99 wizards.pm:121
#, c-format
msgid "Error"
msgstr "错误"
#: ../move/move.pm:605 install_steps.pm:82
#, c-format
msgid ""
"An error occurred, but I do not know how to handle it nicely.\n"
"Continue at your own risk."
msgstr ""
"发生错误, 可是我不知道该怎样处理才好。\n"
"继续下去会怎样就看您的运气了。"
#: ../move/move.pm:660 install_steps_interactive.pm:37
#, c-format
msgid "An error occurred"
msgstr "发生了一个错误"
#: ../move/move.pm:666
#, c-format
msgid ""
"An error occurred:\n"
"\n"
"\n"
"%s\n"
"\n"
"This may come from corrupted system configuration files\n"
"on the USB key, in this case removing them and then\n"
"rebooting Mandriva Move would fix the problem. To do\n"
"so, click on the corresponding button.\n"
"\n"
"\n"
"You may also want to reboot and remove the USB key, or\n"
"examine its contents under another OS, or even have\n"
"a look at log files in console #3 and #4 to try to\n"
"guess what's happening."
msgstr ""
"发生了错误: \n"
"\n"
"\n"
"%s\n"
"\n"
"这可能是 USB 密钥盘中的系统配置文件已经损坏。此时只需删除这些文\n"
"件, 然后重新启动 Mandriva Move 即可解决此问题。要完成这一操作, \n"
"只需点击下面的按钮。\n"
"\n"
"\n"
"您也可能想要重新启动后拔出 USB 密钥盘, 或者在其它操作系统中检查\n"
"其中的内容, 甚至想要看看 #3 和 #4 控制台中的日志文件, 以便试着检\n"
"查究竟是哪里出了问题。"
#: ../move/move.pm:681
#, c-format
msgid "Remove system config files"
msgstr "删除系统配置文件"
#: ../move/move.pm:682
#, c-format
msgid "Simply reboot"
msgstr "只是重新启动"
#: ../move/tree/mdk_totem:50 ../move/tree/mdk_totem:96
#, c-format
msgid "You can only run with no CDROM support"
msgstr "您只能以无 CDROM 支持的方式下运行"
#: ../move/tree/mdk_totem:71
#, c-format
msgid "Kill those programs"
msgstr "中止这些应用程序"
#: ../move/tree/mdk_totem:72
#, c-format
msgid "No CDROM support"
msgstr "无 CDROM 支持"
#: ../move/tree/mdk_totem:76 diskdrake/hd_gtk.pm:92
#: diskdrake/interactive.pm:1052 diskdrake/interactive.pm:1062
#: diskdrake/interactive.pm:1115
#, c-format
msgid "Read carefully!"
msgstr "请仔细阅读!"
#: ../move/tree/mdk_totem:77
#, c-format
msgid ""
"You can not use another CDROM when the following programs are running: \n"
"%s"
msgstr ""
"在下列程序运行的过程中, 您无法使用其它的 CDROM: \n"
"%s"
#: ../move/tree/mdk_totem:101
#, c-format
msgid "Copying to memory to allow removing the CDROM"
msgstr "复制到内存以便允许移去 CDROM"
#: Xconfig/card.pm:13
#, c-format
msgid "256 kB"
msgstr "256 kB"
#: Xconfig/card.pm:14
#, c-format
msgid "512 kB"
msgstr "512 kB"
#: Xconfig/card.pm:15
#, c-format
msgid "1 MB"
msgstr "1 MB"
#: Xconfig/card.pm:16
#, c-format
msgid "2 MB"
msgstr "2 MB"
#: Xconfig/card.pm:17
#, c-format
msgid "4 MB"
msgstr "4 MB"
#: Xconfig/card.pm:18
#, c-format
msgid "8 MB"
msgstr "8 MB"
#: Xconfig/card.pm:19
#, c-format
msgid "16 MB"
msgstr "16 MB"
#: Xconfig/card.pm:20
#, c-format
msgid "32 MB"
msgstr "32 MB"
#: Xconfig/card.pm:21
#, c-format
msgid "64 MB or more"
msgstr "64 MB 或更多"
#: Xconfig/card.pm:155
#, c-format
msgid "X server"
msgstr "X 服务器"
#: Xconfig/card.pm:156
#, c-format
msgid "Choose an X server"
msgstr "选择 X 服务器"
#: Xconfig/card.pm:188
#, c-format
msgid "Multi-head configuration"
msgstr "多显示器配置"
#: Xconfig/card.pm:189
#, c-format
msgid ""
"Your system supports multiple head configuration.\n"
"What do you want to do?"
msgstr ""
"您的系统支持多显示器。\n"
"是否进行设置?"
#: Xconfig/card.pm:258
#, c-format
msgid "Can not install Xorg package: %s"
msgstr "无法安装 Xorg 软件包: %s"
#: Xconfig/card.pm:268
#, c-format
msgid "Select the memory size of your graphics card"
msgstr "请选择您显示卡上内存的大小"
#: Xconfig/card.pm:357
#, c-format
msgid "Xorg configuration"
msgstr "Xorg 配置"
#: Xconfig/card.pm:359
#, c-format
msgid "Which configuration of Xorg do you want to have?"
msgstr "您希望拥有哪个 Xorg 配置?"
#: Xconfig/card.pm:392
#, c-format
msgid "Configure all heads independently"
msgstr "独立配置所有头"
#: Xconfig/card.pm:393
#, c-format
msgid "Use Xinerama extension"
msgstr "使用 Xinerama 扩展"
#: Xconfig/card.pm:398
#, c-format
msgid "Configure only card \"%s\"%s"
msgstr "只配置“%s”%s 卡"
#: Xconfig/card.pm:410 Xconfig/various.pm:23
#, c-format
msgid "Xorg %s"
msgstr "Xorg %s"
#: Xconfig/card.pm:417 Xconfig/various.pm:22
#, c-format
msgid "Xorg %s with 3D hardware acceleration"
msgstr "Xorg %s 带有硬件 3D 加速的支持"
#: Xconfig/card.pm:419
#, c-format
msgid "Your card can have 3D hardware acceleration support with Xorg %s."
msgstr "使用 Xorg %s, 您的显示卡可以得到 3D 硬件加速支持。"
#: Xconfig/card.pm:425
#, c-format
msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
msgstr "Xorg %s 带有试验阶段的 3D 硬件加速支持"
#: Xconfig/card.pm:427
#, c-format
msgid ""
"Your card can have 3D hardware acceleration support with Xorg %s,\n"
"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
"使用 Xorg %s, 您的显示卡可以得到 3D 硬件加速支持。\n"
"注意这是试验阶段的支持, 它可能会使您的电脑失去反应。"
#: Xconfig/main.pm:90 Xconfig/main.pm:91 Xconfig/monitor.pm:116 any.pm:973
#, c-format
msgid "Custom"
msgstr "自定义"
#: Xconfig/main.pm:127 diskdrake/dav.pm:26 help.pm:14
#: install_steps_interactive.pm:86 install_steps_interactive.pm:1332
#: printer/printerdrake.pm:882 printer/printerdrake.pm:899
#: printer/printerdrake.pm:4701 printer/printerdrake.pm:5165
#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
#: standalone/logdrake:176 standalone/net_applet:103
#: standalone/scannerdrake:477
#, c-format
msgid "Quit"
msgstr "退出"
#: Xconfig/main.pm:129
#, c-format
msgid "Graphic Card"
msgstr "显示卡"
#: Xconfig/main.pm:132 Xconfig/monitor.pm:110
#, c-format
msgid "Monitor"
msgstr "显示器"
#: Xconfig/main.pm:135 Xconfig/resolution_and_depth.pm:287
#, c-format
msgid "Resolution"
msgstr "分辨率"
#: Xconfig/main.pm:138
#, c-format
msgid "Test"
msgstr "测试"
#: Xconfig/main.pm:143 diskdrake/dav.pm:65 diskdrake/interactive.pm:448
#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#: printer/printerdrake.pm:1125 standalone/drakfont:491
#: standalone/drakfont:554
#, c-format
msgid "Options"
msgstr "选项"
#: Xconfig/main.pm:178
#, c-format
msgid "Your Xorg configuration file is broken, we will ignore it."
msgstr "您的 Xorg 配置文件已经损坏, 我们将会忽略该文件。"
#: Xconfig/main.pm:196
#, c-format
msgid ""
"Keep the changes?\n"
"The current configuration is:\n"
"\n"
"%s"
msgstr ""
"保存修改吗?\n"
"当前配置是: \n"
"\n"
"%s"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor for head #%d"
msgstr "选择显示头 %d 的显示器"
#: Xconfig/monitor.pm:111
#, c-format
msgid "Choose a monitor"
msgstr "选择显示器"
#: Xconfig/monitor.pm:117
#, c-format
msgid "Plug'n Play"
msgstr "即插即用"
#: Xconfig/monitor.pm:118 mouse.pm:49
#, c-format
msgid "Generic"
msgstr "通用"
#: Xconfig/monitor.pm:119 standalone/drakconnect:591 standalone/harddrake2:54
#: standalone/harddrake2:88
#, c-format
msgid "Vendor"
msgstr "厂家"
#: Xconfig/monitor.pm:129
#, c-format
msgid "Plug'n Play probing failed. Please select the correct monitor"
msgstr "即插即用检测失败。请明确选择一个显示器"
#: Xconfig/monitor.pm:137
#, c-format
msgid ""
"The two critical parameters are the vertical refresh rate, which is the "
"rate\n"
"at which the whole screen is refreshed, and most importantly the horizontal\n"
"sync rate, which is the rate at which scanlines are displayed.\n"
"\n"
"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
"range\n"
"that is beyond the capabilities of your monitor: you may damage your "
"monitor.\n"
" If in doubt, choose a conservative setting."
msgstr ""
"两个关键的参数: \n"
"(1) 垂直刷新率, 用于设置屏幕每秒钟更新的次数;\n"
"(2) 水平刷新率, 用于设置显示扫描线的速率。\n"
"\n"
"千万小心!不要把这些同步范围设定得超过您的显示器的能力: \n"
"不恰当的设置可能会损害您的显示器!\n"
"所以没把握时, 您可以选择保守的设置。"
#: Xconfig/monitor.pm:144
#, c-format
msgid "Horizontal refresh rate"
msgstr "水平刷新率"
#: Xconfig/monitor.pm:145
#, c-format
msgid "Vertical refresh rate"
msgstr "垂直刷新率"
#: Xconfig/resolution_and_depth.pm:10
#, c-format
msgid "256 colors (8 bits)"
msgstr "256 色(8 位)"
#: Xconfig/resolution_and_depth.pm:11
#, c-format
msgid "32 thousand colors (15 bits)"
msgstr "3 万 2 千色(15 位)"
#: Xconfig/resolution_and_depth.pm:12
#, c-format
msgid "65 thousand colors (16 bits)"
msgstr "6 万 5 千色(16 位)"
#: Xconfig/resolution_and_depth.pm:13
#, c-format
msgid "16 million colors (24 bits)"
msgstr "1 千 6 百万色(24 位)"
#: Xconfig/resolution_and_depth.pm:127
#, c-format
msgid "Resolutions"
msgstr "分辨率"
#: Xconfig/resolution_and_depth.pm:309 diskdrake/hd_gtk.pm:336
#: install_steps_gtk.pm:288 mouse.pm:168 services.pm:162
#: standalone/drakbackup:1584 standalone/drakperm:250
#, c-format
msgid "Other"
msgstr "其它"
#: Xconfig/resolution_and_depth.pm:358
#, c-format
msgid "Choose the resolution and the color depth"
msgstr "选择屏幕分辨率以及颜色深度"
#: Xconfig/resolution_and_depth.pm:359
#, c-format
msgid "Graphics card: %s"
msgstr "显示卡: %s"
#: Xconfig/resolution_and_depth.pm:373 interactive.pm:119 interactive.pm:436
#: interactive/http.pm:103 interactive/http.pm:156 interactive/newt.pm:321
#: interactive/stdio.pm:39 interactive/stdio.pm:142 interactive/stdio.pm:143
#: standalone/drakTermServ:195 standalone/drakTermServ:515
#: standalone/drakbackup:1350 standalone/drakbackup:3973
#: standalone/drakbackup:4033 standalone/drakbackup:4077
#: standalone/drakconnect:158 standalone/drakconnect:852
#: standalone/drakconnect:939 standalone/drakconnect:1030
#: standalone/drakfont:575 standalone/drakfont:585 standalone/draksplash:173
#: standalone/drakups:212 standalone/net_monitor:339 ugtk2.pm:392 ugtk2.pm:490
#: ugtk2.pm:899 ugtk2.pm:922
#, c-format
msgid "Ok"
msgstr "确定"
#: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
#: install_steps_interactive.pm:840 interactive.pm:120 interactive.pm:437
#: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
#: interactive/stdio.pm:39 interactive/stdio.pm:142
#: printer/printerdrake.pm:3971 standalone/drakautoinst:215
#: standalone/drakbackup:1350 standalone/drakbackup:3899
#: standalone/drakbackup:3903 standalone/drakbackup:3961
#: standalone/drakconnect:157 standalone/drakconnect:937
#: standalone/drakconnect:1029 standalone/drakfont:585 standalone/drakfont:663
#: standalone/drakfont:740 standalone/draksplash:173 standalone/drakups:219
#: standalone/logdrake:176 standalone/net_monitor:338 ugtk2.pm:386
#: ugtk2.pm:488 ugtk2.pm:497 ugtk2.pm:899
#, c-format
msgid "Cancel"
msgstr "取消"
#: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
#: interactive/gtk.pm:682 interactive/gtk.pm:684 standalone/drakTermServ:284
#: standalone/drakbackup:3895 standalone/drakbug:105
#: standalone/drakconnect:153 standalone/drakconnect:236
#: standalone/drakfont:510 standalone/draknfs:206 standalone/drakperm:133
#: standalone/draksambashare:314 standalone/draksec:344 standalone/draksec:346
#: standalone/draksec:364 standalone/draksec:366 ugtk2.pm:1031 ugtk2.pm:1032
#, c-format
msgid "Help"
msgstr "帮助"
#: Xconfig/test.pm:30
#, c-format
msgid "Test of the configuration"
msgstr "测试配置"
#: Xconfig/test.pm:31
#, c-format
msgid "Do you want to test the configuration?"
msgstr "您想要测试您的配置吗?"
#: Xconfig/test.pm:31
#, c-format
msgid "Warning: testing this graphic card may freeze your computer"
msgstr "警告: 测试这个图形卡可能会锁定您的电脑"
#: Xconfig/test.pm:69
#, c-format
msgid ""
"An error occurred:\n"
"%s\n"
"Try to change some parameters"
msgstr ""
"发生了错误:\n"
"%s\n"
"试着更改某些参数"
#: Xconfig/test.pm:129
#, c-format
msgid "Leaving in %d seconds"
msgstr "即将于 %d 秒后离开"
#: Xconfig/test.pm:129
#, c-format
msgid "Is this the correct setting?"
msgstr "设置正确吗?"
#: Xconfig/various.pm:29
#, c-format
msgid "Keyboard layout: %s\n"
msgstr "键盘布局: %s\n"
#: Xconfig/various.pm:30
#, c-format
msgid "Mouse type: %s\n"
msgstr "鼠标类型: %s\n"
#: Xconfig/various.pm:31
#, c-format
msgid "Mouse device: %s\n"
msgstr "鼠标设备: %s\n"
#: Xconfig/various.pm:33
#, c-format
msgid "Monitor: %s\n"
msgstr "显示器: %s\n"
#: Xconfig/various.pm:34
#, c-format
msgid "Monitor HorizSync: %s\n"
msgstr "显示器水平刷新率: %s\n"
#: Xconfig/various.pm:35
#, c-format
msgid "Monitor VertRefresh: %s\n"
msgstr "显示器垂直刷新率: %s\n"
#: Xconfig/various.pm:37
#, c-format
msgid "Graphics card: %s\n"
msgstr "显示卡: %s\n"
#: Xconfig/various.pm:38
#, c-format
msgid "Graphics memory: %s kB\n"
msgstr "显存: %s kB\n"
#: Xconfig/various.pm:40
#, c-format
msgid "Color depth: %s\n"
msgstr "颜色深度: %s\n"
#: Xconfig/various.pm:41
#, c-format
msgid "Resolution: %s\n"
msgstr "分辨率: %s\n"
#: Xconfig/various.pm:43
#, c-format
msgid "Xorg driver: %s\n"
msgstr "Xorg 驱动程序: %s\n"
#: Xconfig/various.pm:72
#, c-format
msgid "Graphical interface at startup"
msgstr "启动时进入图形界面"
#: Xconfig/various.pm:74
#, c-format
msgid ""
"I can setup your computer to automatically start the graphical interface "
"(Xorg) upon booting.\n"
"Would you like Xorg to start when you reboot?"
msgstr ""
"我可以设定您的电脑在开机时自动进入图形界面(Xorg)。\n"
"您希望这么做吗?"
#: Xconfig/various.pm:87
#, c-format
msgid ""
"Your graphic card seems to have a TV-OUT connector.\n"
"It can be configured to work using frame-buffer.\n"
"\n"
"For this you have to plug your graphic card to your TV before booting your "
"computer.\n"
"Then choose the \"TVout\" entry in the bootloader\n"
"\n"
"Do you have this feature?"
msgstr ""
"看来您的图形卡拥有电视输出接口。\n"
"可以配置它用帧缓冲器工作。\n"
"\n"
"您必须先把您的电视和您的图形卡连接好, 然后启动您的电脑。\n"
"然后在启动引导程序中选择“TVout”条目\n"
"\n"
"您是否要使用此特性?"
#: Xconfig/various.pm:99
#, c-format
msgid "What norm is your TV using?"
msgstr "您的电视信号是什么制式?"
#: Xconfig/xfree.pm:648
#, c-format
msgid ""
"_:weird aspect ratio\n"
"other"
msgstr "其它"
#: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473
#: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:356
#: standalone/service_harddrake:206
#, c-format
msgid "Please wait"
msgstr "请稍候"
#: any.pm:142
#, c-format
msgid "Bootloader installation in progress"
msgstr "启动引导程序安装中"
#: any.pm:153
#, c-format
msgid ""
"LILO wants to assign a new Volume ID to drive %s. However, changing\n"
"the Volume ID of a Windows NT, 2000, or XP boot disk is a fatal Windows "
"error.\n"
"This caution does not apply to Windows 95 or 98, or to NT data disks.\n"
"\n"
"Assign a new Volume ID?"
msgstr ""
"LILO 想要为驱动器 %s 指定新卷 ID。但是, 更改 Windows NT、2000 或 XP 启动盘的"
"卷 ID 将会导致 Windows 的严重错误。这对于 Windows 95/98, 或者是 Windows NT 的"
"数据磁盘不会造成任何问题。\n"
"\n"
"要指定新卷 ID 吗?"
#: any.pm:164
#, c-format
msgid "Installation of bootloader failed. The following error occurred:"
msgstr "安装系统引导程序失败。出现下列错误:"
#: any.pm:170
#, c-format
msgid ""
"You may need to change your Open Firmware boot-device to\n"
" enable the bootloader. If you do not see the bootloader prompt at\n"
" reboot, hold down Command-Option-O-F at reboot and enter:\n"
" setenv boot-device %s,\\\\:tbxi\n"
" Then type: shut-down\n"
"At your next boot you should see the bootloader prompt."
msgstr ""
"您可能得改变开放固件引导设备来使能启动引导程序。\n"
"如果开机时没有引导程序提示, 按 Command-Option-O-F 然后输入: \n"
" setenv boot-device %s,\\\\:tbxi\n"
" 然后输入: shut-down\n"
"您将在下次开机时看到引导程序提示。"
#: any.pm:208
#, c-format
msgid ""
"You decided to install the bootloader on a partition.\n"
"This implies you already have a bootloader on the hard drive you boot (eg: "
"System Commander).\n"
"\n"
"On which drive are you booting?"
msgstr ""
"您决定在一个分区上安装启动引导程序。\n"
"那么在用于启动的硬盘上您应该已经有一个安装启动引导程序(例如: System "
"Commander)。\n"
"\n"
"您要用哪个硬盘启动?"
#: any.pm:231 help.pm:739
#, c-format
msgid "First sector of drive (MBR)"
msgstr "驱动器的第一扇区(MBR)"
#: any.pm:232
#, c-format
msgid "First sector of the root partition"
msgstr "根分区的第一扇区"
#: any.pm:234
#, c-format
msgid "On Floppy"
msgstr "在软盘上"
#: any.pm:236 help.pm:739 printer/printerdrake.pm:4357
#, c-format
msgid "Skip"
msgstr "跳过"
#: any.pm:240
#, c-format
msgid "LILO/grub Installation"
msgstr "LILO/grub 安装"
#: any.pm:241
#, c-format
msgid "Where do you want to install the bootloader?"
msgstr "您希望启动引导程序安装到哪里?"
#: any.pm:267 standalone/drakboot:269
#, c-format
msgid "Boot Style Configuration"
msgstr "启动风格配置"
#: any.pm:269 any.pm:270 any.pm:303 any.pm:304
#, c-format
msgid "Bootloader main options"
msgstr "引导程序的主要选项"
#: any.pm:275
#, c-format
msgid "Give the ram size in MB"
msgstr "以兆为单位给出内存大小"
#: any.pm:277
#, c-format
msgid ""
"Option ``Restrict command line options'' is of no use without a password"
msgstr "没有密码不能使用“限定命令行选项”"
#: any.pm:278 any.pm:615 authentication.pm:181
#, c-format
msgid "The passwords do not match"
msgstr "两次密码不符"
#: any.pm:278 any.pm:615 authentication.pm:181 diskdrake/interactive.pm:1326
#, c-format
msgid "Please try again"
msgstr "请再试一次"
#: any.pm:283 any.pm:308
#, c-format
msgid "Bootloader to use"
msgstr "要使用的引导程序"
#: any.pm:285 any.pm:310
#, c-format
msgid "Boot device"
msgstr "启动设备"
#: any.pm:287
#, c-format
msgid "Delay before booting default image"
msgstr "启动默认映像前的延迟"
#: any.pm:288
#, c-format
msgid "Enable ACPI"
msgstr "启用 ACPI"
#: any.pm:290
#, c-format
msgid "Force no APIC"
msgstr "强制无 APIC"
#: any.pm:292
#, c-format
msgid "Force No Local APIC"
msgstr "强制无本地 APIC"
#: any.pm:294 any.pm:650 authentication.pm:186 diskdrake/smbnfs_gtk.pm:180
#: network/netconnect.pm:573 printer/printerdrake.pm:1888
#: printer/printerdrake.pm:2009 standalone/drakbackup:1628
#: standalone/drakbackup:3502 standalone/drakups:299
#, c-format
msgid "Password"
msgstr "密码"
#: any.pm:295 any.pm:651 authentication.pm:187
#, c-format
msgid "Password (again)"
msgstr "密码(请再输一次)"
#: any.pm:296
#, c-format
msgid "Restrict command line options"
msgstr "限制命令行选项"
#: any.pm:296
#, c-format
msgid "restrict"
msgstr "限制"
#: any.pm:298
#, c-format
msgid "Clean /tmp at each boot"
msgstr "每次启动时清除 /tmp"
#: any.pm:299
#, c-format
msgid "Precise RAM size if needed (found %d MB)"
msgstr "精确的内存大小(找到 %d MB)"
#: any.pm:309
#, c-format
msgid "Init Message"
msgstr "初始信息"
#: any.pm:311
#, c-format
msgid "Open Firmware Delay"
msgstr "开放固件延迟"
#: any.pm:312
#, c-format
msgid "Kernel Boot Timeout"
msgstr "核心启动超时"
#: any.pm:313
#, c-format
msgid "Enable CD Boot?"
msgstr "允许 CD 启动?"
#: any.pm:314
#, c-format
msgid "Enable OF Boot?"
msgstr "启用 OF 启动?"
#: any.pm:315
#, c-format
msgid "Default OS?"
msgstr "默认操作系统?"
#: any.pm:369
#, c-format
msgid "Image"
msgstr "映像"
#: any.pm:370 any.pm:380
#, c-format
msgid "Root"
msgstr "根目录"
#: any.pm:371 any.pm:393
#, c-format
msgid "Append"
msgstr "追加"
#: any.pm:373 standalone/drakboot:271 standalone/drakboot:275
#, c-format
msgid "Video mode"
msgstr "显示模式"
#: any.pm:375
#, c-format
msgid "Initrd"
msgstr "Initrd"
#: any.pm:376
#, c-format
msgid "Network profile"
msgstr "网络配置文件"
#: any.pm:385 any.pm:390 any.pm:392
#, c-format
msgid "Label"
msgstr "标签"
#: any.pm:387 any.pm:397 harddrake/v4l.pm:368 standalone/draksec:52
#, c-format
msgid "Default"
msgstr "默认"
#: any.pm:394
#, c-format
msgid "Initrd-size"
msgstr "Initrd 大小"
#: any.pm:396
#, c-format
msgid "NoVideo"
msgstr "无视频"
#: any.pm:407
#, c-format
msgid "Empty label not allowed"
msgstr "标签不能为空"
#: any.pm:408
#, c-format
msgid "You must specify a kernel image"
msgstr "您必须指定一个内核映像"
#: any.pm:408
#, c-format
msgid "You must specify a root partition"
msgstr "您必须指定根目录所在分区"
#: any.pm:409
#, c-format
msgid "This label is already used"
msgstr "这个名字已经被使用"
#: any.pm:423
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "要添加的条目是什么类型?"
#: any.pm:424
#, c-format
msgid "Linux"
msgstr "Linux"
#: any.pm:424
#, c-format
msgid "Other OS (SunOS...)"
msgstr "其它操作系统(SunOS...)"
#: any.pm:425
#, c-format
msgid "Other OS (MacOS...)"
msgstr "其它操作系统(MacOS...)"
#: any.pm:425
#, c-format
msgid "Other OS (Windows...)"
msgstr "其它操作系统(Windows...)"
#: any.pm:453
#, c-format
msgid ""
"Here are the entries on your boot menu so far.\n"
"You can create additional entries or change the existing ones."
msgstr ""
"引导菜单中现有下列条目。\n"
"您可以创建额外的条目或是更改已存在的条目。"
#: any.pm:601
#, c-format
msgid "access to X programs"
msgstr "允许使用 X 应用程序"
#: any.pm:602
#, c-format
msgid "access to rpm tools"
msgstr "允许使用 rpm 工具"
#: any.pm:603
#, c-format
msgid "allow \"su\""
msgstr "允许使用“su”指令"
#: any.pm:604
#, c-format
msgid "access to administrative files"
msgstr "允许访问系统设置文件"
#: any.pm:605
#, c-format
msgid "access to network tools"
msgstr "允许使用网络工具"
#: any.pm:606
#, c-format
msgid "access to compilation tools"
msgstr "允许使用编译工具"
#: any.pm:611
#, c-format
msgid "(already added %s)"
msgstr "(已经添加了 %s)"
#: any.pm:616
#, c-format
msgid "This password is too simple"
msgstr "密码太简单"
#: any.pm:617
#, c-format
msgid "Please give a user name"
msgstr "请给出用户名"
#: any.pm:618
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "用户名只能包含小写字母、数字、“-”和“_”"
#: any.pm:619
#, c-format
msgid "The user name is too long"
msgstr "该用户名太长"
#: any.pm:620
#, c-format
msgid "This user name has already been added"
msgstr "该用户名已经存在"
#: any.pm:621 any.pm:653
#, c-format
msgid "User ID"
msgstr "用户 ID"
#: any.pm:622 any.pm:654
#, c-format
msgid "Group ID"
msgstr "组 ID"
#: any.pm:625
#, c-format
msgid "%s must be a number"
msgstr "%s 必须是数字"
#: any.pm:626
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr "%s 应该大于 500。仍然接受吗?"
#: any.pm:631 standalone/draksambashare:1210
#, c-format
msgid "Add user"
msgstr "添加用户"
#: any.pm:633
#, c-format
msgid ""
"Enter a user\n"
"%s"
msgstr ""
"输入一个用户名\n"
"%s"
#: any.pm:636 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:154
#: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:81 help.pm:530
#: interactive/http.pm:151 printer/printerdrake.pm:197
#: printer/printerdrake.pm:382 printer/printerdrake.pm:5165
#: standalone/drakbackup:2715 standalone/scannerdrake:668
#: standalone/scannerdrake:818
#, c-format
msgid "Done"
msgstr "完成"
#: any.pm:637 help.pm:51
#, c-format
msgid "Accept user"
msgstr "接受用户"
#: any.pm:648
#, c-format
msgid "Real name"
msgstr "真实姓名"
#: any.pm:649 standalone/drakbackup:1623
#, c-format
msgid "Login name"
msgstr "登录名"
#: any.pm:652
#, c-format
msgid "Shell"
msgstr "Shell"
#: any.pm:656
#, c-format
msgid "Icon"
msgstr "图标"
#: any.pm:703 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "自动登录"
#: any.pm:704
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "您可在此设定启动时自动以某用户的身份登入系统。"
#: any.pm:705
#, c-format
msgid "Use this feature"
msgstr "使用此特性"
#: any.pm:706
#, c-format
msgid "Choose the default user:"
msgstr "选择默认的用户:"
#: any.pm:707
#, c-format
msgid "Choose the window manager to run:"
msgstr "选择要运行的窗口管理程序:"
#: any.pm:719 any.pm:787
#, c-format
msgid "Please choose a language to use."
msgstr "请选择要使用的语言。"
#: any.pm:720 any.pm:788
#, c-format
msgid "Language choice"
msgstr "语言选择"
#: any.pm:748
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
"the languages you would like to install. They will be available\n"
"when your installation is complete and you restart your system."
msgstr ""
"Mandriva Linux 可以支持多种语言。请选择您想要安装的语言。\n"
"安装完成并重新启动系统后它们就可以使用。"
#: any.pm:751
#, c-format
msgid "Multi languages"
msgstr "多语言"
#: any.pm:767 any.pm:796 help.pm:647
#, c-format
msgid "Use Unicode by default"
msgstr "默认使用 Unicode"
#: any.pm:768 help.pm:647
#, c-format
msgid "All languages"
msgstr "全部语言"
#: any.pm:840 help.pm:566 help.pm:855 install_steps_interactive.pm:961
#, c-format
msgid "Country / Region"
msgstr "国家/地区"
#: any.pm:842
#, c-format
msgid "Please choose your country."
msgstr "请选择您的国家/地区。"
#: any.pm:844
#, c-format
msgid "Here is the full list of available countries"
msgstr "在此列出了可用的全部国家/地区"
#: any.pm:845
#, c-format
msgid "Other Countries"
msgstr "其它国家"
#: any.pm:845 help.pm:51 help.pm:409 help.pm:431 help.pm:647 help.pm:722
#: interactive.pm:397
#, c-format
msgid "Advanced"
msgstr "高级"
#: any.pm:853
#, c-format
msgid "Input method:"
msgstr "输入法:"
#: any.pm:856 install_any.pm:423 network/netconnect.pm:306
#: network/netconnect.pm:311 network/netconnect.pm:1216 network/wireless.pm:7
#: printer/printerdrake.pm:105 printer/printerdrake.pm:2430
#, c-format
msgid "None"
msgstr "无"
#: any.pm:973
#, c-format
msgid "No sharing"
msgstr "禁止共享"
#: any.pm:973
#, c-format
msgid "Allow all users"
msgstr "允许所有用户使用"
#: any.pm:977
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
"Allowing this will permit users to simply click on \"Share\" in konqueror "
"and nautilus.\n"
"\n"
"\"Custom\" permit a per-user granularity.\n"
msgstr ""
"您想要允许用户能共享他们自己的目录吗?\n"
"选择允许, 用户将只需在 Konqueror 和 Nautilus 中单击“共享”即可开放共享。\n"
"“自定义”允许按照不同用户细分设置。\n"
#: any.pm:989
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr "NFS: 传统的 Unix 文件共享系统, Mac 和 Windows 上支持较少。"
#: any.pm:992
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr "SMB: Windows、MacOS X 和其它现代 Linux 系统所用的文件共享系统。"
#: any.pm:1000
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "您可以使用 NFS 或 Samba 导出。请选择您想要使用的协议。"
#: any.pm:1025
#, c-format
msgid "Launch userdrake"
msgstr "运行“Drak 用户管理”"
#: any.pm:1025 printer/printerdrake.pm:4196 printer/printerdrake.pm:4199
#: printer/printerdrake.pm:4200 printer/printerdrake.pm:4201
#: printer/printerdrake.pm:5483 standalone/drakTermServ:294
#: standalone/drakbackup:4095 standalone/drakbug:126 standalone/drakfont:498
#: standalone/drakids:64 standalone/drakids:77 standalone/drakids:85
#: standalone/draknfs:210 standalone/net_monitor:117
#: standalone/printerdrake:583
#, c-format
msgid "Close"
msgstr "关闭"
#: any.pm:1027
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
"You can use userdrake to add a user to this group."
msgstr ""
"按用户设置的共享, 使用组“fileshare”。\n"
"您可以使用“Drak 用户管理”将用户添加到此组中。"
#: authentication.pm:23
#, c-format
msgid "Local file"
msgstr "本地文件"
#: authentication.pm:24
#, c-format
msgid "LDAP"
msgstr "LDAP"
#: authentication.pm:25
#, c-format
msgid "NIS"
msgstr "NIS"
#: authentication.pm:26
#, c-format
msgid "Smart Card"
msgstr "智能卡"
#: authentication.pm:27 authentication.pm:152
#, c-format
msgid "Windows Domain"
msgstr "Windows 域"
#: authentication.pm:28
#, c-format
msgid "Active Directory with SFU"
msgstr "带 SFU 的活动目录"
#: authentication.pm:29
#, c-format
msgid "Active Directory with Winbind"
msgstr "带 Winbind 的活动目录"
#: authentication.pm:55
#, c-format
msgid "Local file:"
msgstr "本地文件:"
#: authentication.pm:55
#, c-format
msgid ""
"Use local for all authentication and information user tell in local file"
msgstr "使用本地进行全部身份验证并在本地文件中存储关于用户的信息"
#: authentication.pm:56
#, c-format
msgid "LDAP:"
msgstr "LDAP:"
#: authentication.pm:56
#, c-format
msgid ""
"Tells your computer to use LDAP for some or all authentication. LDAP "
"consolidates certain types of information within your organization."
msgstr ""
"通知您的计算机使用 LDAP 进行某些或全部身份验证。LDAP 能够在您的组织中巩固特定"
"类型的信息。"
#: authentication.pm:57
#, c-format
msgid "NIS:"
msgstr "NIS:"
#: authentication.pm:57
#, c-format
msgid ""
"Allows you to run a group of computers in the same Network Information "
"Service domain with a common password and group file."
msgstr ""
"允许您通过公共的密码和组文件在同一个网络信息服务(NIS)域中运行一组计算机。"
#: authentication.pm:58
#, c-format
msgid "Windows Domain:"
msgstr "Windows 域:"
#: authentication.pm:58
#, c-format
msgid ""
"iWinbind allows the system to retrieve information and authenticate users in "
"a Windows domain."
msgstr "iWinbind 允许系统从 Windows 域中获取信息并验证用户的身份。"
#: authentication.pm:59
#, c-format
msgid "Active Directory with SFU:"
msgstr "带 SFU 的活动目录:"
#: authentication.pm:59
#, c-format
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr "使用 Kerboros 和 LDAP 在活动目录服务器中进行身份验证"
#: authentication.pm:60
#, c-format
msgid "Active Directory with Winbind:"
msgstr "带 Winbind 的活动目录:"
#: authentication.pm:60
#, c-format
msgid ""
"Winbind allows the system to authenticate users in a Windows Active "
"Directory Server."
msgstr "Winbind 允许系统在 Windows 活动目录服务器中进行用户的身份验证。"
#: authentication.pm:85
#, c-format
msgid "Authentication LDAP"
msgstr "LDAP 认证"
#: authentication.pm:86
#, c-format
msgid "LDAP Base dn"
msgstr "LDAP 基 DN"
#: authentication.pm:87 share/compssUsers.pl:102
#, c-format
msgid "LDAP Server"
msgstr "LDAP 服务器"
#: authentication.pm:100 fsedit.pm:23
#, c-format
msgid "simple"
msgstr "简单"
#: authentication.pm:101
#, c-format
msgid "TLS"
msgstr "TLS"
#: authentication.pm:102
#, c-format
msgid "SSL"
msgstr "SSL"
#: authentication.pm:103
#, c-format
msgid "security layout (SASL/Kerberos)"
msgstr "安全层(SASL/Kerberos)"
#: authentication.pm:110 authentication.pm:148
#, c-format
msgid "Authentication Active Directory"
msgstr "验证活动目录"
#: authentication.pm:111 diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Domain"
msgstr "域"
#: authentication.pm:113 diskdrake/dav.pm:63 help.pm:146
#: printer/printerdrake.pm:141 share/compssUsers.pl:82
#: standalone/drakTermServ:269
#, c-format
msgid "Server"
msgstr "服务器"
#: authentication.pm:114
#, c-format
msgid "LDAP users database"
msgstr "LDAP 用户数据库"
#: authentication.pm:115
#, c-format
msgid "Use Anonymous BIND "
msgstr "使用匿名 BIND"
#: authentication.pm:116
#, c-format
msgid "LDAP user allowed to browse the Active Directory"
msgstr "允许浏览活动目录的 LDAP 用户"
#: authentication.pm:117
#, c-format
msgid "Password for user"
msgstr "用户的密码"
#: authentication.pm:129
#, c-format
msgid "Authentication NIS"
msgstr "NIS 认证"
#: authentication.pm:130
#, c-format
msgid "NIS Domain"
msgstr "NIS 网域"
#: authentication.pm:131
#, c-format
msgid "NIS Server"
msgstr "NIS 服务器"
#: authentication.pm:136
#, c-format
msgid ""
"For this to work for a W2K PDC, you will probably need to have the admin "
"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
"add and reboot the server.\n"
"You will also need the username/password of a Domain Admin to join the "
"machine to the Windows(TM) domain.\n"
"If networking is not yet enabled, Drakx will attempt to join the domain "
"after the network setup step.\n"
"Should this setup fail for some reason and domain authentication is not "
"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
"Domain, and Admin Username/Password, after system boot.\n"
"The command 'wbinfo -t' will test whether your authentication secrets are "
"good."
msgstr ""
"为了在 W2K PDC 服务器的环境中正常使用, 您可能得请 W2K 管理员运行“C:\\>net "
"localgroup \"Pre-Windows 2000 Compatible Access\" everyone /add”并重启服务"
"器。\n"
"您还需要一个域管理员的用户名/密码以便把这个机器添加到 Windows(TM) 域。\n"
"如果网络还没有启用, DrakX 会在网络设置步骤之后尝试加入域。\n"
"如果这个设置因为什么失败了而且域认证不起作用, 启动系统之后运行“smbpasswd -j "
"域名 -U 用户%%密码”填入您的 Windows(tm) 域名和管理员的用户名/密码。\n"
"命令“wbinfo -t”会测试您的认证密码是否完好。"
#: authentication.pm:148
#, c-format
msgid "Authentication Windows Domain"
msgstr "Windows 域认证"
#: authentication.pm:150
#, c-format
msgid "Active Directory Realm "
msgstr "活动目录域"
#: authentication.pm:153
#, c-format
msgid "Domain Admin User Name"
msgstr "域管理员用户名"
#: authentication.pm:154
#, c-format
msgid "Domain Admin Password"
msgstr "域管理员密码"
#: authentication.pm:170
#, c-format
msgid "Set administrator (root) password and network authentication methods"
msgstr "设定管理员(root)密码及网络认证方式"
#: authentication.pm:171
#, c-format
msgid "Set administrator (root) password"
msgstr "设定管理员(root)密码"
#: authentication.pm:172 standalone/drakvpn:1111
#, c-format
msgid "Authentication method"
msgstr "身份验证方式"
#. -PO: keep this short or else the buttons will not fit in the window
#: authentication.pm:177 help.pm:722
#, c-format
msgid "No password"
msgstr "无密码"
#: authentication.pm:183
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "这个密码太简单了(至少要有 %d 个字符)"
#: authentication.pm:188 network/netconnect.pm:311 network/netconnect.pm:574
#: standalone/drakauth:24 standalone/drakauth:26 standalone/drakconnect:481
#, c-format
msgid "Authentication"
msgstr "身份验证"
#: authentication.pm:307
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "没有 NIS 域无法广播"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
#: bootloader.pm:764
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
msgstr ""
"Welcome to the operating system chooser!\n"
"\n"
"Choose an operating system from the list above or\n"
"wait for default boot.\n"
"\n"
#: bootloader.pm:904
#, c-format
msgid "LILO with graphical menu"
msgstr "图形菜单 LILO"
#: bootloader.pm:905
#, c-format
msgid "LILO with text menu"
msgstr "文本菜单 LILO"
#: bootloader.pm:906
#, c-format
msgid "GRUB with graphical menu"
msgstr "图形菜单 GRUB"
#: bootloader.pm:907
#, c-format
msgid "GRUB with text menu"
msgstr "文本菜单 GRUB"
#: bootloader.pm:908
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
#: bootloader.pm:985
#, c-format
msgid "not enough room in /boot"
msgstr "/boot 中没有足够空间"
#: bootloader.pm:1475
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "%s 分区不能安装启动引导程序\n"
#: bootloader.pm:1515
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr "必须更新您的启动引导程序配置, 因为分区已经重新编号"
#: bootloader.pm:1528
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr "无法正确安装启动引导程序。您需要以抢救方式启动并选择“%s”"
#: bootloader.pm:1529
#, c-format
msgid "Re-install Boot Loader"
msgstr "重新安装启动引导程序"
#: common.pm:131
#, c-format
msgid "KB"
msgstr "KB"
#: common.pm:131
#, c-format
msgid "MB"
msgstr "MB"
#: common.pm:131
#, c-format
msgid "GB"
msgstr "GB"
#: common.pm:139
#, c-format
msgid "TB"
msgstr "TB"
#: common.pm:147
#, c-format
msgid "%d minutes"
msgstr "%d 分钟"
#: common.pm:149
#, c-format
msgid "1 minute"
msgstr "1 分钟"
#: common.pm:151
#, c-format
msgid "%d seconds"
msgstr "%d 秒钟"
#: common.pm:257
#, c-format
msgid "kdesu missing"
msgstr "缺少 kdesu"
#: common.pm:260
#, c-format
msgid "consolehelper missing"
msgstr "缺少 consolehelper"
#: crypto.pm:13 crypto.pm:48 lang.pm:207 network/adsl_consts.pm:66
#: network/adsl_consts.pm:75 network/adsl_consts.pm:84
#, c-format
msgid "Austria"
msgstr "奥地利"
#: crypto.pm:14 crypto.pm:47 lang.pm:208 standalone/drakxtv:48
#, c-format
msgid "Australia"
msgstr "澳大利亚"
#: crypto.pm:15 crypto.pm:49 lang.pm:214 network/adsl_consts.pm:93
#: network/adsl_consts.pm:102 network/adsl_consts.pm:114
#: network/adsl_consts.pm:123 network/netconnect.pm:44
#, c-format
msgid "Belgium"
msgstr "比利时"
#: crypto.pm:16 crypto.pm:50 lang.pm:223 network/adsl_consts.pm:132
#: network/adsl_consts.pm:143 network/adsl_consts.pm:152
#: network/adsl_consts.pm:161
#, c-format
msgid "Brazil"
msgstr "巴西"
#: crypto.pm:17 crypto.pm:51 lang.pm:230
#, c-format
msgid "Canada"
msgstr "加拿大"
#: crypto.pm:18 crypto.pm:74 lang.pm:235 network/adsl_consts.pm:891
#: network/adsl_consts.pm:900 network/adsl_consts.pm:911
#, c-format
msgid "Switzerland"
msgstr "瑞士"
#: crypto.pm:19 lang.pm:242
#, c-format
msgid "Costa Rica"
msgstr "哥斯达黎加"
#: crypto.pm:20 crypto.pm:52 lang.pm:248 network/adsl_consts.pm:368
#, c-format
msgid "Czech Republic"
msgstr "捷克共和国"
#: crypto.pm:21 crypto.pm:57 lang.pm:249 network/adsl_consts.pm:499
#: network/adsl_consts.pm:508
#, c-format
msgid "Germany"
msgstr "德国"
#: crypto.pm:22 crypto.pm:53 lang.pm:251 network/adsl_consts.pm:378
#, c-format
msgid "Denmark"
msgstr "丹麦"
#: crypto.pm:23 crypto.pm:54 lang.pm:256
#, c-format
msgid "Estonia"
msgstr "爱沙尼亚"
#: crypto.pm:24 crypto.pm:72 lang.pm:260 network/adsl_consts.pm:759
#: network/adsl_consts.pm:770 network/adsl_consts.pm:781
#: network/adsl_consts.pm:792 network/adsl_consts.pm:801
#: network/adsl_consts.pm:810 network/adsl_consts.pm:819
#: network/adsl_consts.pm:828 network/adsl_consts.pm:837
#: network/adsl_consts.pm:846 network/adsl_consts.pm:855
#: network/adsl_consts.pm:864 network/adsl_consts.pm:873
#, c-format
msgid "Spain"
msgstr "西班牙"
#: crypto.pm:25 crypto.pm:55 lang.pm:262 network/adsl_consts.pm:387
#, c-format
msgid "Finland"
msgstr "芬兰"
#: crypto.pm:26 crypto.pm:56 lang.pm:267 network/adsl_consts.pm:396
#: network/adsl_consts.pm:408 network/adsl_consts.pm:420
#: network/adsl_consts.pm:431 network/adsl_consts.pm:442
#: network/adsl_consts.pm:454 network/adsl_consts.pm:466
#: network/adsl_consts.pm:477 network/adsl_consts.pm:488
#: network/netconnect.pm:41
#, c-format
msgid "France"
msgstr "法国"
#: crypto.pm:27 crypto.pm:58 lang.pm:280 network/adsl_consts.pm:519
#, c-format
msgid "Greece"
msgstr "希腊"
#: crypto.pm:28 crypto.pm:59 lang.pm:291 network/adsl_consts.pm:528
#, c-format
msgid "Hungary"
msgstr "匈牙利"
#: crypto.pm:29 crypto.pm:60 lang.pm:293 network/adsl_consts.pm:537
#: standalone/drakxtv:47
#, c-format
msgid "Ireland"
msgstr "爱尔兰"
#: crypto.pm:30 crypto.pm:61 lang.pm:294 network/adsl_consts.pm:546
#, c-format
msgid "Israel"
msgstr "以色列"
#: crypto.pm:31 crypto.pm:62 lang.pm:300 network/adsl_consts.pm:557
#: network/adsl_consts.pm:569 network/adsl_consts.pm:580
#: network/adsl_consts.pm:589 network/netconnect.pm:43 standalone/drakxtv:47
#, c-format
msgid "Italy"
msgstr "意大利"
#: crypto.pm:32 crypto.pm:63 lang.pm:303
#, c-format
msgid "Japan"
msgstr "日本"
#: crypto.pm:33 crypto.pm:64 lang.pm:352 network/adsl_consts.pm:620
#: network/adsl_consts.pm:629 network/adsl_consts.pm:638
#: network/adsl_consts.pm:647 network/netconnect.pm:42
#, c-format
msgid "Netherlands"
msgstr "荷兰"
#: crypto.pm:34 crypto.pm:66 lang.pm:353 network/adsl_consts.pm:656
#: network/adsl_consts.pm:661 network/adsl_consts.pm:666
#: network/adsl_consts.pm:671 network/adsl_consts.pm:676
#: network/adsl_consts.pm:681 network/adsl_consts.pm:686
#, c-format
msgid "Norway"
msgstr "挪威"
#: crypto.pm:35 crypto.pm:65 lang.pm:357
#, c-format
msgid "New Zealand"
msgstr "新西兰"
#: crypto.pm:36 crypto.pm:67 lang.pm:365 network/adsl_consts.pm:693
#: network/adsl_consts.pm:704
#, c-format
msgid "Poland"
msgstr "波兰"
#: crypto.pm:37 crypto.pm:68 lang.pm:370 network/adsl_consts.pm:716
#, c-format
msgid "Portugal"
msgstr "葡萄牙"
#: crypto.pm:38 crypto.pm:69 lang.pm:376 network/adsl_consts.pm:725
#, c-format
msgid "Russia"
msgstr "俄罗斯"
#: crypto.pm:39 crypto.pm:73 lang.pm:382 network/adsl_consts.pm:882
#, c-format
msgid "Sweden"
msgstr "瑞典"
#: crypto.pm:40 crypto.pm:70 lang.pm:387
#, c-format
msgid "Slovakia"
msgstr "斯洛伐克"
#: crypto.pm:41 crypto.pm:76 lang.pm:401 network/adsl_consts.pm:920
#, c-format
msgid "Thailand"
msgstr "泰国"
#: crypto.pm:42 crypto.pm:75 lang.pm:411
#, c-format
msgid "Taiwan"
msgstr "中国台湾"
#: crypto.pm:43 crypto.pm:71 lang.pm:430 standalone/drakxtv:49
#, c-format
msgid "South Africa"
msgstr "南非"
#: crypto.pm:77 crypto.pm:112 lang.pm:416 network/netconnect.pm:45
#, c-format
msgid "United States"
msgstr "美国"
#: diskdrake/dav.pm:17
#, c-format
msgid ""
"WebDAV is a protocol that allows you to mount a web server's directory\n"
"locally, and treat it like a local filesystem (provided the web server is\n"
"configured as a WebDAV server). If you would like to add WebDAV mount\n"
"points, select \"New\"."
msgstr ""
"WebDAV 是一种协议, 它允许您将 Web 服务器的目录装载到本地, 并将其看作本地的\n"
"文件系统(假设该 Web 服务器已经配置为 WebDAV 服务器)。如果您想要添加 WebDAV\n"
"挂载点, 请选择“新建”。"
#: diskdrake/dav.pm:25
#, c-format
msgid "New"
msgstr "新建"
#: diskdrake/dav.pm:61 diskdrake/interactive.pm:454 diskdrake/smbnfs_gtk.pm:74
#, c-format
msgid "Unmount"
msgstr "卸载"
#: diskdrake/dav.pm:62 diskdrake/interactive.pm:451 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Mount"
msgstr "挂载"
#: diskdrake/dav.pm:64 diskdrake/interactive.pm:446
#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:689
#: diskdrake/removable.pm:23 diskdrake/smbnfs_gtk.pm:78
#, c-format
msgid "Mount point"
msgstr "挂载点"
#: diskdrake/dav.pm:83
#, c-format
msgid "Please enter the WebDAV server URL"
msgstr "请输入 WebDAV 服务器的 URL"
#: diskdrake/dav.pm:87
#, c-format
msgid "The URL must begin with http:// or https://"
msgstr "URL 应该是以 http:// 或 https:// 开头"
#: diskdrake/dav.pm:109
#, c-format
msgid "Server: "
msgstr "服务器: "
#: diskdrake/dav.pm:110 diskdrake/interactive.pm:521
#: diskdrake/interactive.pm:1208 diskdrake/interactive.pm:1286
#, c-format
msgid "Mount point: "
msgstr "挂载点: "
#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1293
#, c-format
msgid "Options: %s"
msgstr "选项: %s"
#: diskdrake/hd_gtk.pm:92
#, c-format
msgid "Please make a backup of your data first"
msgstr "请事先备份您的数据"
#: diskdrake/hd_gtk.pm:95
#, c-format
msgid ""
"If you plan to use aboot, be careful to leave a free space (2048 sectors is "
"enough)\n"
"at the beginning of the disk"
msgstr ""
"如果您计划采用 aboot, 请注意在磁盘的开头位置留下一段自由空间\n"
"(2048 扇区就足够了)"
#: diskdrake/hd_gtk.pm:152 help.pm:530
#, c-format
msgid "Wizard"
msgstr "向导"
#: diskdrake/hd_gtk.pm:185
#, c-format
msgid "Choose action"
msgstr "选择操作"
#: diskdrake/hd_gtk.pm:189
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
"I suggest you first resize that partition\n"
"(click on it, then click on \"Resize\")"
msgstr ""
"您有一个很大的 Microsoft Windows 分区。\n"
"我建议您先重新设置这个分区的大小\n"
"(点中它, 然后按“改变大小”)"
#: diskdrake/hd_gtk.pm:191
#, c-format
msgid "Please click on a partition"
msgstr "请单击一个分区"
#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
#: standalone/drakbackup:2950 standalone/drakbackup:3010
#, c-format
msgid "Details"
msgstr "细节"
#: diskdrake/hd_gtk.pm:251
#, c-format
msgid "No hard drives found"
msgstr "没有发现硬盘"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Ext2"
msgstr "Ext2"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Journalised FS"
msgstr "日志文件系统"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Swap"
msgstr "交换"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "SunOS"
msgstr "SunOS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "HFS"
msgstr "HFS"
#: diskdrake/hd_gtk.pm:335
#, c-format
msgid "Windows"
msgstr "Windows"
#: diskdrake/hd_gtk.pm:336 diskdrake/interactive.pm:1223
#, c-format
msgid "Empty"
msgstr "空"
#: diskdrake/hd_gtk.pm:340
#, c-format
msgid "Filesystem types:"
msgstr "文件系统类型: "
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:359 diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``%s'' instead"
msgstr "用“%s”代替"
#: diskdrake/hd_gtk.pm:357 diskdrake/interactive.pm:470
#, c-format
msgid "Create"
msgstr "新建"
#: diskdrake/hd_gtk.pm:357 diskdrake/hd_gtk.pm:365
#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:623
#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
#: standalone/harddrake2:108 standalone/harddrake2:117
#, c-format
msgid "Type"
msgstr "类型"
#. -PO: "Delete" is a button text and the translation has to be AS SHORT AS POSSIBLE
#: diskdrake/hd_gtk.pm:359 diskdrake/interactive.pm:455
#: standalone/drakperm:123 standalone/printerdrake:248
#, c-format
msgid "Delete"
msgstr "删除"
#: diskdrake/hd_gtk.pm:365
#, c-format
msgid "Use ``Unmount'' first"
msgstr "请先“Unmount”"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose another partition"
msgstr "选择其它分区"
#: diskdrake/interactive.pm:194
#, c-format
msgid "Choose a partition"
msgstr "选择分区"
#: diskdrake/interactive.pm:223
#, c-format
msgid "Exit"
msgstr "退出"
#: diskdrake/interactive.pm:256 help.pm:530
#, c-format
msgid "Undo"
msgstr "撤消"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to normal mode"
msgstr "切换到正常模式"
#: diskdrake/interactive.pm:256
#, c-format
msgid "Toggle to expert mode"
msgstr "切换到专家模式"
#: diskdrake/interactive.pm:275
#, c-format
msgid "Continue anyway?"
msgstr "仍然继续吗?"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without saving"
msgstr "退出而不保存更改"
#: diskdrake/interactive.pm:280
#, c-format
msgid "Quit without writing the partition table?"
msgstr "退出而不保存分区表吗?"
#: diskdrake/interactive.pm:285
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "您想要保存 /etc/fstab 修改吗?"
#: diskdrake/interactive.pm:292 install_steps_interactive.pm:340
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "对分区表的更改要等到重新启动后才能生效"
#: diskdrake/interactive.pm:297
#, c-format
msgid ""
"You should format partition %s.\n"
"Otherwise no entry for mount point %s will be written in fstab.\n"
"Quit anyway?"
msgstr ""
"您应该格式化分区 %s。\n"
"否则, 将无法在 fstab 中写入挂载点 %s 的任何信息。\n"
"仍然退出吗?"
#: diskdrake/interactive.pm:310 help.pm:530
#, c-format
msgid "Clear all"
msgstr "全部清除"
#: diskdrake/interactive.pm:311 help.pm:530
#, c-format
msgid "Auto allocate"
msgstr "自动分配"
#: diskdrake/interactive.pm:312 help.pm:530 help.pm:566 help.pm:606
#: help.pm:855 install_steps_interactive.pm:123
#, c-format
msgid "More"
msgstr "更多"
#: diskdrake/interactive.pm:317
#, c-format
msgid "Hard drive information"
msgstr "硬盘信息"
#: diskdrake/interactive.pm:349
#, c-format
msgid "All primary partitions are used"
msgstr "主分区数目已经满了"
#: diskdrake/interactive.pm:350
#, c-format
msgid "I can not add any more partitions"
msgstr "我无法再添加任何分区了"
#: diskdrake/interactive.pm:351
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr "如果需要更多的分区, 请删除一个主分区以创建扩展分区"
#: diskdrake/interactive.pm:360
#, c-format
msgid "No supermount"
msgstr "无 supermount"
#: diskdrake/interactive.pm:361
#, c-format
msgid "Supermount"
msgstr "Supermount"
#: diskdrake/interactive.pm:362
#, c-format
msgid "Supermount except for CDROM drives"
msgstr "除 CDROM 驱动器以外都为 Supermount"
#: diskdrake/interactive.pm:368 help.pm:530
#, c-format
msgid "Save partition table"
msgstr "保存分区表"
#: diskdrake/interactive.pm:369 help.pm:530
#, c-format
msgid "Restore partition table"
msgstr "恢复分区表"
#: diskdrake/interactive.pm:370 help.pm:530
#, c-format
msgid "Rescue partition table"
msgstr "抢救分区表"
#: diskdrake/interactive.pm:372 help.pm:530
#, c-format
msgid "Reload partition table"
msgstr "重新读取分区表"
#: diskdrake/interactive.pm:374
#, c-format
msgid "Removable media automounting"
msgstr "自动装载可移动介质"
#: diskdrake/interactive.pm:387 diskdrake/interactive.pm:413
#, c-format
msgid "Select file"
msgstr "选择文件"
#: diskdrake/interactive.pm:399
#, c-format
msgid ""
"The backup partition table has not the same size\n"
"Still continue?"
msgstr ""
"备份分区表的大小和原来的有所不同\n"
"仍然继续吗?"
#: diskdrake/interactive.pm:428
#, c-format
msgid "Trying to rescue partition table"
msgstr "正在尝试恢复分区表"
#: diskdrake/interactive.pm:434
#, c-format
msgid "Detailed information"
msgstr "详细信息"
#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:760
#, c-format
msgid "Resize"
msgstr "改变大小"
#: diskdrake/interactive.pm:450
#, c-format
msgid "Format"
msgstr "格式化"
#: diskdrake/interactive.pm:452
#, c-format
msgid "Add to RAID"
msgstr "加入 RAID"
#: diskdrake/interactive.pm:453
#, c-format
msgid "Add to LVM"
msgstr "加入 LVM"
#: diskdrake/interactive.pm:456
#, c-format
msgid "Remove from RAID"
msgstr "从 RAID 中移除"
#: diskdrake/interactive.pm:457
#, c-format
msgid "Remove from LVM"
msgstr "从 LVM 中移除"
#: diskdrake/interactive.pm:458
#, c-format
msgid "Modify RAID"
msgstr "修改 RAID"
#: diskdrake/interactive.pm:459
#, c-format
msgid "Use for loopback"
msgstr "用于回环"
#: diskdrake/interactive.pm:514
#, c-format
msgid "Create a new partition"
msgstr "创建一个新分区"
#: diskdrake/interactive.pm:517
#, c-format
msgid "Start sector: "
msgstr "开始扇区: "
#: diskdrake/interactive.pm:519 diskdrake/interactive.pm:929
#, c-format
msgid "Size in MB: "
msgstr "大小(MB): "
#: diskdrake/interactive.pm:520 diskdrake/interactive.pm:930
#, c-format
msgid "Filesystem type: "
msgstr "文件系统类型: "
#: diskdrake/interactive.pm:525
#, c-format
msgid "Preference: "
msgstr "首选项: "
#: diskdrake/interactive.pm:528
#, c-format
msgid "Logical volume name "
msgstr "逻辑卷标"
#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"You can not create a new partition\n"
"(since you reached the maximal number of primary partitions).\n"
"First remove a primary partition and create an extended partition."
msgstr ""
"您无法创建新分区\n"
"(您超过了允许的主分区数量)。\n"
"请先删除一个主分区, 然后创建一个扩展分区。"
#: diskdrake/interactive.pm:588
#, c-format
msgid "Remove the loopback file?"
msgstr "删除回环(loopback)文件?"
#: diskdrake/interactive.pm:607
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "在改变分区表 %s 的类型之后, 在这个分区上的所有资料将要被清除"
#: diskdrake/interactive.pm:619
#, c-format
msgid "Change partition type"
msgstr "更改分区类型"
#: diskdrake/interactive.pm:620 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "您希望使用哪种文件系统?"
#: diskdrake/interactive.pm:628
#, c-format
msgid "Switching from ext2 to ext3"
msgstr "把 ext2 升级到 ext3"
#: diskdrake/interactive.pm:657
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "您想把回环(loopback)文件 %s 挂载到哪里?"
#: diskdrake/interactive.pm:658
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "您想把设备 %s 挂载到哪里?"
#: diskdrake/interactive.pm:663
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
"Remove the loopback first"
msgstr ""
"无法取消设定的挂载点, 因为该分区正用于回环。\n"
"请先删除回环"
#: diskdrake/interactive.pm:688
#, c-format
msgid "Where do you want to mount %s?"
msgstr "您想把 %s 挂载到哪里?"
#: diskdrake/interactive.pm:712 diskdrake/interactive.pm:791
#: install_interactive.pm:156 install_interactive.pm:188
#, c-format
msgid "Resizing"
msgstr "改变大小"
#: diskdrake/interactive.pm:712
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "计算 FAT 文件系统的边界"
#: diskdrake/interactive.pm:748
#, c-format
msgid "This partition is not resizeable"
msgstr "无法更改此分区的大小"
#: diskdrake/interactive.pm:753
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "应该先备份在这个分区上的所有数据"
#: diskdrake/interactive.pm:755
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "改变分区 %s 的大小之后, 这个分区上现有的所有资料将被清除"
#: diskdrake/interactive.pm:760
#, c-format
msgid "Choose the new size"
msgstr "选择新的大小"
#: diskdrake/interactive.pm:761
#, c-format
msgid "New size in MB: "
msgstr "新大小(MB): "
#: diskdrake/interactive.pm:802 install_interactive.pm:196
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
"为了保证更改分区大小之后的数据完整性, 在您下次启动进入 Windows(TM) 时可能\n"
"会自动运行文件系统检查。"
#: diskdrake/interactive.pm:843
#, c-format
msgid "Choose an existing RAID to add to"
msgstr "选择加入一个已存在的 RAID"
#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:862
#, c-format
msgid "new"
msgstr "新建"
#: diskdrake/interactive.pm:860
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "选择加入一个已存在的 LVM"
#: diskdrake/interactive.pm:866
#, c-format
msgid "LVM name?"
msgstr "LVM 名称?"
#: diskdrake/interactive.pm:894
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
"Do you want to move used physical extents on this volume to other volumes?"
msgstr ""
"物理卷 %s 仍在使用中。\n"
"您是否想要将此卷上已用的物理扩展分区移动到其它卷上?"
#: diskdrake/interactive.pm:896
#, c-format
msgid "Moving physical extents"
msgstr "移动物理扩展分区"
#: diskdrake/interactive.pm:914
#, c-format
msgid "This partition can not be used for loopback"
msgstr "这个分区不能被用于回环"
#: diskdrake/interactive.pm:927
#, c-format
msgid "Loopback"
msgstr "回环"
#: diskdrake/interactive.pm:928
#, c-format
msgid "Loopback file name: "
msgstr "回环文件名: "
#: diskdrake/interactive.pm:933
#, c-format
msgid "Give a file name"
msgstr "给一个文件名"
#: diskdrake/interactive.pm:936
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "文件已经被另一个回环使用, 请另外选择一个"
#: diskdrake/interactive.pm:937
#, c-format
msgid "File already exists. Use it?"
msgstr "文件已经存在。使用现有的文件吗?"
#: diskdrake/interactive.pm:960
#, c-format
msgid "Mount options"
msgstr "挂载选项"
#: diskdrake/interactive.pm:967
#, c-format
msgid "Various"
msgstr "杂项"
#: diskdrake/interactive.pm:1034
#, c-format
msgid "device"
msgstr "设备"
#: diskdrake/interactive.pm:1035
#, c-format
msgid "level"
msgstr "级别"
#: diskdrake/interactive.pm:1036
#, c-format
msgid "chunk size in KiB"
msgstr "组块大小(KB)"
#: diskdrake/interactive.pm:1053
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "小心: 该操作有危险。"
#: diskdrake/interactive.pm:1068
#, c-format
msgid "What type of partitioning?"
msgstr "何种分区类型?"
#: diskdrake/interactive.pm:1106
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "修改要等到重新启动后才能生效"
#: diskdrake/interactive.pm:1115
#, c-format
msgid "Partition table of drive %s is going to be written to disk!"
msgstr "驱动器 %s 的分区表将会写入磁盘中!"
#: diskdrake/interactive.pm:1138
#, c-format
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "格式化分区 %s 之后, 该分区上的所有数据都将丢失"
#: diskdrake/interactive.pm:1154
#, c-format
msgid "Move files to the new partition"
msgstr "移动文件到新分区"
#: diskdrake/interactive.pm:1154 standalone/draksambashare:75
#: standalone/draksambashare:138
#, c-format
msgid "Hide files"
msgstr "隐藏文件"
#: diskdrake/interactive.pm:1155
#, c-format
msgid ""
"Directory %s already contains data\n"
"(%s)"
msgstr ""
"目录 %s 已经包含数据\n"
"(%s)"
#: diskdrake/interactive.pm:1166
#, c-format
msgid "Moving files to the new partition"
msgstr "移动文件到新分区"
#: diskdrake/interactive.pm:1170
#, c-format
msgid "Copying %s"
msgstr "复制 %s"
#: diskdrake/interactive.pm:1174
#, c-format
msgid "Removing %s"
msgstr "删除 %s"
#: diskdrake/interactive.pm:1188
#, c-format
msgid "partition %s is now known as %s"
msgstr "分区 %s 现在被识别为 %s"
#: diskdrake/interactive.pm:1189
#, c-format
msgid "Partitions have been renumbered: "
msgstr "分区已被重新编号: "
#: diskdrake/interactive.pm:1209 diskdrake/interactive.pm:1271
#, c-format
msgid "Device: "
msgstr "设备: "
#: diskdrake/interactive.pm:1210
#, c-format
msgid "Devfs name: "
msgstr "Devfs 名称: "
#: diskdrake/interactive.pm:1211
#, c-format
msgid "Volume label: "
msgstr "卷标: "
#: diskdrake/interactive.pm:1212
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS 下的盘符: %s(只是猜测)\n"
#: diskdrake/interactive.pm:1216 diskdrake/interactive.pm:1225
#: diskdrake/interactive.pm:1289
#, c-format
msgid "Type: "
msgstr "类型: "
#: diskdrake/interactive.pm:1220 install_steps_gtk.pm:300
#, c-format
msgid "Name: "
msgstr "名称: "
#: diskdrake/interactive.pm:1227
#, c-format
msgid "Start: sector %s\n"
msgstr "开始: 第 %s 扇区\n"
#: diskdrake/interactive.pm:1228
#, c-format
msgid "Size: %s"
msgstr "大小: %s"
#: diskdrake/interactive.pm:1230
#, c-format
msgid ", %s sectors"
msgstr ", %s 扇区"
#: diskdrake/interactive.pm:1232
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "柱面 %d 到 %d\n"
#: diskdrake/interactive.pm:1233
#, c-format
msgid "Number of logical extents: %d\n"
msgstr "逻辑分区数:%d\n"
#: diskdrake/interactive.pm:1234
#, c-format
msgid "Formatted\n"
msgstr "已格式化\n"
#: diskdrake/interactive.pm:1235
#, c-format
msgid "Not formatted\n"
msgstr "未格式化\n"
#: diskdrake/interactive.pm:1236
#, c-format
msgid "Mounted\n"
msgstr "已挂载\n"
#: diskdrake/interactive.pm:1237
#, c-format
msgid "RAID %s\n"
msgstr "RAID %s\n"
#: diskdrake/interactive.pm:1242
#, c-format
msgid ""
"Loopback file(s):\n"
" %s\n"
msgstr ""
"回环文件: \n"
" %s\n"
#: diskdrake/interactive.pm:1243
#, c-format
msgid ""
"Partition booted by default\n"
" (for MS-DOS boot, not for lilo)\n"
msgstr ""
"预设的启动分区\n"
" (给 MS-DOS 启动用的, 跟 lilo 无关)\n"
#: diskdrake/interactive.pm:1245
#, c-format
msgid "Level %s\n"
msgstr "级别 %s\n"
#: diskdrake/interactive.pm:1246
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "组块大小 %d KB\n"
#: diskdrake/interactive.pm:1247
#, c-format
msgid "RAID-disks %s\n"
msgstr "RAID 磁盘 %s\n"
#: diskdrake/interactive.pm:1249
#, c-format
msgid "Loopback file name: %s"
msgstr "回环文件名称: %s"
#: diskdrake/interactive.pm:1252
#, c-format
msgid ""
"\n"
"Chances are, this partition is\n"
"a Driver partition. You should\n"
"probably leave it alone.\n"
msgstr ""
"\n"
"此分区很可能是驱动器分区。\n"
"您最好请不要更改它。\n"
#: diskdrake/interactive.pm:1255
#, c-format
msgid ""
"\n"
"This special Bootstrap\n"
"partition is for\n"
"dual-booting your system.\n"
msgstr ""
"\n"
"该 Bootstrap 分区特别\n"
"是保留给双重启动系统。\n"
#: diskdrake/interactive.pm:1272
#, c-format
msgid "Read-only"
msgstr "只读"
#: diskdrake/interactive.pm:1273
#, c-format
msgid "Size: %s\n"
msgstr "大小: %s\n"
#: diskdrake/interactive.pm:1274
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "硬盘参数: %s 柱面, %s 磁头, %s 扇区\n"
#: diskdrake/interactive.pm:1275 network/thirdparty.pm:329
#, c-format
msgid "Info: "
msgstr "信息: "
#: diskdrake/interactive.pm:1276
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM 磁盘 %s\n"
#: diskdrake/interactive.pm:1277
#, c-format
msgid "Partition table type: %s\n"
msgstr "分区表类型: %s\n"
#: diskdrake/interactive.pm:1278
#, c-format
msgid "on channel %d id %d\n"
msgstr "通道 %d id %d\n"
#: diskdrake/interactive.pm:1321
#, c-format
msgid "Filesystem encryption key"
msgstr "文件系统加密密钥"
#: diskdrake/interactive.pm:1322
#, c-format
msgid "Choose your filesystem encryption key"
msgstr "选择该文件系统的加密密钥"
#: diskdrake/interactive.pm:1325
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "这个加密密钥太简单了(至少要有 %d 个字符)"
#: diskdrake/interactive.pm:1326
#, c-format
msgid "The encryption keys do not match"
msgstr "两次加密密钥不符"
#: diskdrake/interactive.pm:1329 network/netconnect.pm:1052
#: standalone/drakconnect:419 standalone/drakroam:120
#, c-format
msgid "Encryption key"
msgstr "加密密钥"
#: diskdrake/interactive.pm:1330
#, c-format
msgid "Encryption key (again)"
msgstr "加密密钥(再输入一次)"
#: diskdrake/interactive.pm:1332 standalone/drakvpn:1017
#: standalone/drakvpn:1102
#, c-format
msgid "Encryption algorithm"
msgstr "加密算法"
#: diskdrake/removable.pm:46
#, c-format
msgid "Change type"
msgstr "更改类型"
#: diskdrake/smbnfs_gtk.pm:163
#, c-format
msgid "Can not login using username %s (bad password?)"
msgstr "不能使用用户名 %s 登录(密码错误?)"
#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, c-format
msgid "Domain Authentication Required"
msgstr "需要域认证"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Which username"
msgstr "哪个用户名"
#: diskdrake/smbnfs_gtk.pm:168
#, c-format
msgid "Another one"
msgstr "另一个"
#: diskdrake/smbnfs_gtk.pm:177
#, c-format
msgid ""
"Please enter your username, password and domain name to access this host."
msgstr "要访问此主机, 请输入您的用户名, 密码和域名"
#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3501
#, c-format
msgid "Username"
msgstr "用户名"
#: diskdrake/smbnfs_gtk.pm:205
#, c-format
msgid "Search servers"
msgstr "搜索服务器"
#: diskdrake/smbnfs_gtk.pm:210
#, c-format
msgid "Search new servers"
msgstr "搜索新服务器"
#: do_pkgs.pm:16 do_pkgs.pm:49
#, c-format
msgid "The package %s needs to be installed. Do you want to install it?"
msgstr "需要安装软件包 %s。您同意安装吗?"
#: do_pkgs.pm:19 do_pkgs.pm:39 do_pkgs.pm:52 printer/printerdrake.pm:4037
#, c-format
msgid "Could not install the %s package!"
msgstr "无法安装 %s 软件包!"
#: do_pkgs.pm:24 do_pkgs.pm:57
#, c-format
msgid "Mandatory package %s is missing"
msgstr "无法找到必需的软件包 %s"
#: do_pkgs.pm:35 harddrake/sound.pm:271 install_steps_interactive.pm:1317
#: keyboard.pm:391 network/ndiswrapper.pm:95 network/netconnect.pm:460
#: printer/printerdrake.pm:1429 printer/printerdrake.pm:2461
#: printer/printerdrake.pm:2561 printer/printerdrake.pm:2607
#: printer/printerdrake.pm:2674 printer/printerdrake.pm:2709
#: printer/printerdrake.pm:3043 printer/printerdrake.pm:3050
#: printer/printerdrake.pm:4036 printer/printerdrake.pm:4365
#: printer/printerdrake.pm:4485 printer/printerdrake.pm:5644
#: standalone/drakTermServ:326 standalone/drakTermServ:1205
#: standalone/drakTermServ:1266 standalone/drakTermServ:1931
#: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:133
#: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakperm:380
#: standalone/drakperm:390 standalone/drakups:27 standalone/harddrake2:490
#: standalone/localedrake:43 standalone/scannerdrake:51
#: standalone/scannerdrake:940
#, c-format
msgid "Warning"
msgstr "警告"
#: do_pkgs.pm:35 standalone/drakbackup:4107 standalone/harddrake2:490
#, c-format
msgid "The following packages need to be installed:\n"
msgstr "下列软件包需要安装: \n"
#: do_pkgs.pm:202
#, c-format
msgid "Installing packages..."
msgstr "正在安装软件包..."
#: do_pkgs.pm:247
#, c-format
msgid "Removing packages..."
msgstr "正在删除软件包..."
#: fs/format.pm:58 fs/format.pm:65
#, c-format
msgid "Formatting partition %s"
msgstr "正在格式化分区 %s"
#: fs/format.pm:62
#, c-format
msgid "Creating and formatting file %s"
msgstr "正在创建和格式化文件 %s"
#: fs/format.pm:115
#, c-format
msgid "I do not know how to format %s in type %s"
msgstr "不知道如何将 %s 格式化成 %s 类型"
#: fs/format.pm:120 fs/format.pm:122
#, c-format
msgid "%s formatting of %s failed"
msgstr "%s 格式化 %s 失败"
#: fs/loopback.pm:24
#, c-format
msgid "Circular mounts %s\n"
msgstr "循环装载 %s\n"
#: fs/mount.pm:74
#, c-format
msgid "Mounting partition %s"
msgstr "正在挂载分区 %s"
#: fs/mount.pm:75
#, c-format
msgid "mounting partition %s in directory %s failed"
msgstr "将分区 %s 挂载于目录 %s 失败"
#: fs/mount.pm:80 fs/mount.pm:97
#, c-format
msgid "Checking %s"
msgstr "正在检查 %s"
#: fs/mount.pm:113 partition_table.pm:385
#, c-format
msgid "error unmounting %s: %s"
msgstr "卸载 %s 出错: %s"
#: fs/mount.pm:142
#, c-format
msgid "Enabling swap partition %s"
msgstr "正在启用 swap 分区 %s"
#: fs/mount_options.pm:111
#, c-format
msgid "Use an encrypted file system"
msgstr "使用加密的文件系统"
#: fs/mount_options.pm:113
#, c-format
msgid "Enable group disk quota accounting and optionally enforce limits"
msgstr "启用群组磁盘配额记账及可选强制限制"
#: fs/mount_options.pm:115
#, c-format
msgid ""
"Do not update inode access times on this file system\n"
"(e.g, for faster access on the news spool to speed up news servers)."
msgstr ""
"不在此文件系统更新 inode 访问次数\n"
"(例如, 为了加速对新闻服务器的新闻池的访问)"
#: fs/mount_options.pm:118
#, c-format
msgid ""
"Can only be mounted explicitly (i.e.,\n"
"the -a option will not cause the file system to be mounted)."
msgstr ""
"只能显式装载。\n"
"(即, -a 选项将不会装载文件系统)"
#: fs/mount_options.pm:121
#, c-format
msgid "Do not interpret character or block special devices on the file system."
msgstr "不解释文件系统中的字符或特殊块设备。"
#: fs/mount_options.pm:123
#, c-format
msgid ""
"Do not allow execution of any binaries on the mounted\n"
"file system. This option might be useful for a server that has file systems\n"
"containing binaries for architectures other than its own."
msgstr ""
"不允许在装载的文件系统上执行任何二进制文件。\n"
"此选项对于特定服务器可能非常有用, 比如服务器所包含的文件系统中包含其它\n"
"架构的二进制文件。"
#: fs/mount_options.pm:127
#, c-format
msgid ""
"Do not allow set-user-identifier or set-group-identifier\n"
"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
"have suidperl(1) installed.)"
msgstr ""
"不允许 set-user-identifier 或 set-group-identifier 位生效。\n"
"(这可能比较安全, 如果您安装了 suidperl(1) 则不太安全。)"
#: fs/mount_options.pm:131
#, c-format
msgid "Mount the file system read-only."
msgstr "以只读装载文件系统。"
#: fs/mount_options.pm:133
#, c-format
msgid "All I/O to the file system should be done synchronously."
msgstr "所有到文件系统的输入/输出都应该是同步完成的。"
#: fs/mount_options.pm:137
#, c-format
msgid ""
"Allow an ordinary user to mount the file system. The\n"
"name of the mounting user is written to mtab so that he can unmount the "
"file\n"
"system again. This option implies the options noexec, nosuid, and nodev\n"
"(unless overridden by subsequent options, as in the option line\n"
"user,exec,dev,suid )."
msgstr ""
"允许普通用户装载文件系统。装载用户的用户名将写入 mtab, 这样他就可以稍候\n"
"再次拆卸文件系统。此选项意味着选项 noexec, nosuid 以及 nodev(除非在选项\n"
"行中用单独的选项 user, exec, dev, suid 加以覆盖)。"
#: fs/mount_options.pm:143
#, c-format
msgid "Enable user disk quota accounting, and optionally enforce limits"
msgstr "启用用户磁盘配额记账及可选强制限制"
#: fs/mount_options.pm:145
#, c-format
msgid "Give write access to ordinary users"
msgstr "给普通用户以写权限"
#: fs/mount_options.pm:147
#, c-format
msgid "Give read-only access to ordinary users"
msgstr "给普通用户以只读权限"
#: fs/type.pm:376
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "您不能把 JFS(日志文件系统)用于小于 16 MB 的分区"
#: fs/type.pm:377
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "您不能把 ReiserFS 用于小于 32 MB 的分区"
#: fsedit.pm:27
#, c-format
msgid "with /usr"
msgstr "有 /usr"
#: fsedit.pm:32
#, c-format
msgid "server"
msgstr "服务器"
#: fsedit.pm:217
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
"(\n"
"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
"The other solution is to not allow DrakX to modify the partition table.\n"
"(the error is %s)\n"
"\n"
"Do you agree to lose all the partitions?\n"
msgstr ""
"我无法读取设备 %s 的分区表, 这个分区表破坏得太严重了 :(\n"
"我可以尝试清除坏分区(所有的数据将被清除!), 然后继续。\n"
"另外一个解决办法是禁止 DrakX 修改分区表。\n"
"(错误是 %s)\n"
"\n"
"您同意清除所有分区吗?\n"
#: fsedit.pm:385
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "挂载点必需要以 / 为开头"
#: fsedit.pm:386
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "挂载点只能包含字母和数字"
#: fsedit.pm:387
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "已经有一个分区的挂载点是 %s\n"
#: fsedit.pm:389
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
"No bootloader is able to handle this without a /boot partition.\n"
"Please be sure to add a /boot partition"
msgstr ""
"您选择了把软件 RAID 分区作为根(/)。\n"
"如果没有一个 /boot 分区, 各种启动引导程序都无法处理这种情况。\n"
"所以, 请增加一个 /boot 分区。"
#: fsedit.pm:394
#, c-format
msgid ""
"You can not use a LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr "您不能为挂载点 %s 使用 LVM 逻辑卷,因为该卷跨越了多个物理卷"
#: fsedit.pm:396
#, c-format
msgid ""
"You've selected a LVM Logical Volume as root (/).\n"
"The bootloader is not able to handle this when the volume spans physical "
"volumes.\n"
"You should create a /boot partition first"
msgstr ""
"您将 LVM 逻辑卷选为 root(/)。\n"
"引导程序无法识别跨越多个物理卷的卷。\n"
"您应该先创建 /boot 分区"
#: fsedit.pm:400 fsedit.pm:402
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "这个目录应该保留在根文件系统中"
#: fsedit.pm:404 fsedit.pm:406
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
"point\n"
msgstr "这个挂载点需要一个真正的文件系统(ext2/ext3、reiserfs、xfs 或 jfs)\n"
#: fsedit.pm:408
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "挂载点 %s 不能使用用加密的文件系统"
#: fsedit.pm:469
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "没有足够的空闲空间供自动分配"
#: fsedit.pm:471
#, c-format
msgid "Nothing to do"
msgstr "不做任何事"
#: harddrake/data.pm:62 install_any.pm:1711
#, c-format
msgid "Floppy"
msgstr "软盘"
#: harddrake/data.pm:72
#, c-format
msgid "Zip"
msgstr "Zip"
#: harddrake/data.pm:88 install_any.pm:1712
#, c-format
msgid "Hard Disk"
msgstr "硬盘"
#: harddrake/data.pm:97 install_any.pm:1713
#, c-format
msgid "CDROM"
msgstr "CDROM"
#: harddrake/data.pm:107
#, c-format
msgid "CD/DVD burners"
msgstr "CD/DVD 刻录机"
#: harddrake/data.pm:117
#, c-format
msgid "DVD-ROM"
msgstr "DVD-ROM"
#: harddrake/data.pm:127 standalone/drakbackup:2048
#, c-format
msgid "Tape"
msgstr "磁带机"
#: harddrake/data.pm:136
#, c-format
msgid "Videocard"
msgstr "显示卡"
#: harddrake/data.pm:146
#, c-format
msgid "DVB card"
msgstr "DVB 卡"
#: harddrake/data.pm:154
#, c-format
msgid "Tvcard"
msgstr "电视卡"
#: harddrake/data.pm:163
#, c-format
msgid "Other MultiMedia devices"
msgstr "其它多媒体设备"
#: harddrake/data.pm:172
#, c-format
msgid "Soundcard"
msgstr "声卡"
#: harddrake/data.pm:185
#, c-format
msgid "Webcam"
msgstr "摄像头"
#: harddrake/data.pm:199
#, c-format
msgid "Processors"
msgstr "处理器"
#: harddrake/data.pm:209
#, c-format
msgid "ISDN adapters"
msgstr "ISDN 适配器"
#: harddrake/data.pm:220
#, c-format
msgid "USB sound devices"
msgstr "USB 声音设备"
#: harddrake/data.pm:229
#, c-format
msgid "Radio cards"
msgstr "无线电卡"
#: harddrake/data.pm:238
#, c-format
msgid "ATM network cards"
msgstr "ATM 网卡"
#: harddrake/data.pm:247
#, c-format
msgid "WAN network cards"
msgstr "WAN 网卡"
#: harddrake/data.pm:256
#, c-format
msgid "Bluetooth devices"
msgstr "蓝牙设备"
#: harddrake/data.pm:265
#, c-format
msgid "Ethernetcard"
msgstr "以太网卡"
#: harddrake/data.pm:282 network/netconnect.pm:481
#, c-format
msgid "Modem"
msgstr "调制解调器"
#: harddrake/data.pm:292
#, c-format
msgid "ADSL adapters"
msgstr "ADSL 适配器"
#: harddrake/data.pm:306
#, c-format
msgid "Memory"
msgstr "内存"
#: harddrake/data.pm:315
#, c-format
msgid "AGP controllers"
msgstr "AGP 控制器"
#: harddrake/data.pm:324 help.pm:186 help.pm:855
#: install_steps_interactive.pm:993
#, c-format
msgid "Printer"
msgstr "打印机"
#. -PO: these are joysticks controllers:
#: harddrake/data.pm:338
#, c-format
msgid "Game port controllers"
msgstr "游戏控制器"
#: harddrake/data.pm:347
#, c-format
msgid "Joystick"
msgstr "游戏杆"
#: harddrake/data.pm:357
#, c-format
msgid "SATA controllers"
msgstr "SATA 控制器"
#: harddrake/data.pm:366
#, c-format
msgid "RAID controllers"
msgstr "RAID 控制器"
#: harddrake/data.pm:375
#, c-format
msgid "(E)IDE/ATA controllers"
msgstr "(E)IDE/ATA 控制器"
#: harddrake/data.pm:384
#, c-format
msgid "Firewire controllers"
msgstr "火线控制器"
#: harddrake/data.pm:393
#, c-format
msgid "PCMCIA controllers"
msgstr "PCMCIA 控制器"
#: harddrake/data.pm:402
#, c-format
msgid "SCSI controllers"
msgstr "SCSI 控制器"
#: harddrake/data.pm:411
#, c-format
msgid "USB controllers"
msgstr "USB 控制器"
#: harddrake/data.pm:420
#, c-format
msgid "USB ports"
msgstr "USB 端口"
#: harddrake/data.pm:429
#, c-format
msgid "SMBus controllers"
msgstr "SMBus 控制器"
#: harddrake/data.pm:438
#, c-format
msgid "Bridges and system controllers"
msgstr "桥接和系统控制器"
#: harddrake/data.pm:449 help.pm:855 install_steps_interactive.pm:119
#: install_steps_interactive.pm:953 standalone/keyboarddrake:29
#, c-format
msgid "Keyboard"
msgstr "键盘"
#: harddrake/data.pm:462
#, c-format
msgid "Tablet and touchscreen"
msgstr "手写板和触摸屏"
#: harddrake/data.pm:471 help.pm:855 install_steps_interactive.pm:986
#, c-format
msgid "Mouse"
msgstr "鼠标"
#: harddrake/data.pm:485
#, c-format
msgid "UPS"
msgstr "UPS"
#: harddrake/data.pm:494
#, c-format
msgid "Scanner"
msgstr "扫描仪"
#: harddrake/data.pm:504 standalone/harddrake2:454
#, c-format
msgid "Unknown/Others"
msgstr "未知/其它"
#: harddrake/data.pm:532
#, c-format
msgid "cpu # "
msgstr "CPU # "
#: harddrake/sound.pm:192 standalone/drakconnect:162
#: standalone/drakconnect:637
#, c-format
msgid "Please Wait... Applying the configuration"
msgstr "请稍候...正在应用配置"
#: harddrake/sound.pm:228
#, c-format
msgid "No alternative driver"
msgstr "没有替代的驱动程序"
#: harddrake/sound.pm:229
#, c-format
msgid ""
"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
"currently uses \"%s\""
msgstr "没有已知的 OSS/ALSA 替代驱动程序可以用在您的声卡(%s)上, 现正使用“%s”"
#: harddrake/sound.pm:235
#, c-format
msgid "Sound configuration"
msgstr "声音配置"
#: harddrake/sound.pm:237
#, c-format
msgid ""
"Here you can select an alternative driver (either OSS or ALSA) for your "
"sound card (%s)."
msgstr ""
"您可以在这里配置可以用在您的声卡(%s)上的替代驱动程序(可以选择 OSS 或 ALSA)。"
#. -PO: here the first %s is either "OSS" or "ALSA",
#. -PO: the second %s is the name of the current driver
#. -PO: and the third %s is the name of the default driver
#: harddrake/sound.pm:242
#, c-format
msgid ""
"\n"
"\n"
"Your card currently use the %s\"%s\" driver (default driver for your card is "
"\"%s\")"
msgstr ""
"\n"
"\n"
"您的声卡现在正在使用 %s“%s”驱动程序(其默认驱动程序为“%s”)"
#: harddrake/sound.pm:244
#, c-format
msgid ""
"OSS (Open Sound System) was the first sound API. It's an OS independent "
"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
"and limited API.\n"
"What's more, OSS drivers all reinvent the wheel.\n"
"\n"
"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
"which\n"
"supports quite a large range of ISA, USB and PCI cards.\n"
"\n"
"It also provides a much higher API than OSS.\n"
"\n"
"To use alsa, one can either use:\n"
"- the old compatibility OSS api\n"
"- the new ALSA api that provides many enhanced features but requires using "
"the ALSA library.\n"
msgstr ""
"OSS(开放声音系统)是第一个声音 API。这是一个与操作系统无关的声音 API(在绝大多"
"数 UNIX 系统可用), 但是它非常基础且 API 也受到很大限制。\n"
"更重要的是, OSS 驱动程序需要彻底的重新开发。\n"
"\n"
"ALSA(高级 Linux 声音体系)是一个模块化架构, 它支持大量的 ISA、USB 和 PCI 声"
"卡。\n"
"\n"
"它提供的 API 比 OSS 高级得多。\n"
"\n"
"要使用 alsa, 您可以获得:\n"
"- 与旧的 OSS 兼容的 API\n"
"- 新的 ALSA API 带来许多增强特性, 但这需要使用 ALSA 库。\n"
#: harddrake/sound.pm:258 harddrake/sound.pm:343 standalone/drakups:146
#, c-format
msgid "Driver:"
msgstr "驱动程序: "
#: harddrake/sound.pm:263
#, c-format
msgid "Trouble shooting"
msgstr "疑难解答"
#: harddrake/sound.pm:271
#, c-format
msgid ""
"The old \"%s\" driver is blacklisted.\n"
"\n"
"It has been reported to oops the kernel on unloading.\n"
"\n"
"The new \"%s\" driver will only be used on next bootstrap."
msgstr ""
"旧的“%s”驱动程序已列于黑名单。\n"
"\n"
"据报告该程序可能在卸装时使内核崩溃。\n"
"\n"
"新的“%s”驱动程序仅会在下此启动时使用。"
#: harddrake/sound.pm:279
#, c-format
msgid "No open source driver"
msgstr "没有开放源代码的驱动程序"
#: harddrake/sound.pm:280
#, c-format
msgid ""
"There's no free driver for your sound card (%s), but there's a proprietary "
"driver at \"%s\"."
msgstr ""
"没有已知的 OSS/ALSA 替代驱动程序可以用在您的(%s)声卡上, 不过在“%s”有一个专有"
"的驱动程序。"
#: harddrake/sound.pm:283
#, c-format
msgid "No known driver"
msgstr "没有已知驱动程序"
#: harddrake/sound.pm:284
#, c-format
msgid "There's no known driver for your sound card (%s)"
msgstr "没有已知的驱动程序可以用在您的声卡(%s)上"
#: harddrake/sound.pm:288
#, c-format
msgid "Unknown driver"
msgstr "未知的驱动程序"
#: harddrake/sound.pm:289
#, c-format
msgid "Error: The \"%s\" driver for your sound card is unlisted"
msgstr "错误: 您的“%s”声卡驱动程序未被列出"
#: harddrake/sound.pm:303
#, c-format
msgid "Sound trouble shooting"
msgstr "声音疑难解决"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:306
#, c-format
msgid ""
"The classic bug sound tester is to run the following commands:\n"
"\n"
"\n"
"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
"by default\n"
"\n"
"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
"currently uses\n"
"\n"
"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
"loaded or not\n"
"\n"
"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
"tell you if sound and alsa services're configured to be run on\n"
"initlevel 3\n"
"\n"
"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
"\n"
"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
"经典 bug 声音测试程序将要运行下列命令: \n"
"\n"
"\n"
"-“lspcidrake -v | fgrep AUDIO”将会告诉您您的声卡默认使用哪种驱动程序\n"
"\n"
"-“grep snd-slot /etc/modules.conf”将会告诉您声卡目前使用的驱动程序\n"
"\n"
"-“/sbin/lsmod”允许您检查该驱动程序是否已经装入\n"
"\n"
"-“/sbin/chkconfig --list sound”和“/sbin/chkconfig --list alsa”将会告诉\n"
"您声音和 alsa 服务是否已配置为可以 initlevel 3 运行\n"
"\n"
"- “aumix -q”将告诉您音量是否为静音\n"
"\n"
"- “/sbin/fuser -v /dev/dsp”将会告诉您哪个程序使用声卡。\n"
#: harddrake/sound.pm:332
#, c-format
msgid "Let me pick any driver"
msgstr "让我挑选任意驱动"
#: harddrake/sound.pm:335
#, c-format
msgid "Choosing an arbitrary driver"
msgstr "选择其它驱动"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
#: harddrake/sound.pm:338
#, c-format
msgid ""
"If you really think that you know which driver is the right one for your "
"card\n"
"you can pick one in the above list.\n"
"\n"
"The current driver for your \"%s\" sound card is \"%s\" "
msgstr ""
"如果您明确知道您的卡需要哪个驱动程序\n"
"您可以从上面的列表中选择正确的名字。\n"
"\n"
"当前为您的声卡“%s”使用的是“%s”驱动程序 "
#: harddrake/v4l.pm:12 standalone/net_applet:64 standalone/net_applet:65
#: standalone/net_applet:67
#, c-format
msgid "Auto-detect"
msgstr "自动检测"
#: harddrake/v4l.pm:85 harddrake/v4l.pm:263 harddrake/v4l.pm:296
#, c-format
msgid "Unknown|Generic"
msgstr "未知|通用"
#: harddrake/v4l.pm:118
#, c-format
msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr "未知|CPH05X (bt878) [很多厂家] "
#: harddrake/v4l.pm:119
#, c-format
msgid "Unknown|CPH06X (bt878) [many vendors]"
msgstr "未知|CPH06X (bt878) [很多厂家]"
#: harddrake/v4l.pm:404
#, c-format
msgid ""
"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
"detect the rights parameters.\n"
"If your card is misdetected, you can force the right tuner and card types "
"here. Just select your tv card parameters if needed."
msgstr ""
"对于大多数现代的电视卡, GNU/Linux 内核的 bttv 模块能自动检测正确的参数。\n"
"如果自动检测不适合您的卡, 您可以在这里强制设定正确的调协器及卡的类型。只有必"
"要时才设置电视卡参数。"
#: harddrake/v4l.pm:407
#, c-format
msgid "Card model:"
msgstr "卡的型号: "
#: harddrake/v4l.pm:408
#, c-format
msgid "Tuner type:"
msgstr "调谐器类型: "
#: harddrake/v4l.pm:409
#, c-format
msgid "Number of capture buffers:"
msgstr "捕获缓冲区数量: "
#: harddrake/v4l.pm:409
#, c-format
msgid "number of capture buffers for mmap'ed capture"
msgstr "用于 mmap 捕获的缓冲区数量"
#: harddrake/v4l.pm:411
#, c-format
msgid "PLL setting:"
msgstr "PLL 设置: "
#: harddrake/v4l.pm:412
#, c-format
msgid "Radio support:"
msgstr "无线电支持: "
#: harddrake/v4l.pm:412
#, c-format
msgid "enable radio support"
msgstr "启用无线电支持"
#: help.pm:11
#, c-format
msgid ""
"Before continuing, you should carefully read the terms of the license. It\n"
"covers the entire Mandriva Linux distribution. If you agree with all the\n"
"terms it contains, check the \"%s\" box. If not, clicking on the \"%s\"\n"
"button will reboot your computer."
msgstr ""
"在继续之前, 您应该仔细阅读许可协议的条款。该许可适用于整个 Mandriva Linux发行"
"版。如果您同意其中的全部条款, 请选中\"%s\"框。如果不同意, 单击\"%s\"按钮将重"
"新启动您的计算机。"
#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
#: install_steps_interactive.pm:738 standalone/drakautoinst:214
#, c-format
msgid "Accept"
msgstr "接受"
#: help.pm:17
#, c-format
msgid ""
"GNU/Linux is a multi-user system which means each user can have his or her\n"
"own preferences, own files and so on. But unlike \"root\", who is the\n"
"system administrator, the users you add at this point will not be "
"authorized\n"
"to change anything except their own files and their own configurations,\n"
"protecting the system from unintentional or malicious changes which could\n"
"impact on the system as a whole. You'll have to create at least one regular\n"
"user for yourself -- this is the account which you should use for routine,\n"
"day-to-day usage. Although it's very easy to log in as \"root\" to do\n"
"anything and everything, it may also be very dangerous! A very simple\n"
"mistake could mean that your system will not work any more. If you make a\n"
"serious mistake as a regular user, the worst that can happen is that you'll\n"
"lose some information, but you will not affect the entire system.\n"
"\n"
"The first field asks you for a real name. Of course, this is not mandatory\n"
"-- you can actually enter whatever you like. DrakX will use the first word\n"
"you type in this field and copy it to the \"%s\" one, which is the name\n"
"this user will enter to log onto the system. If you like, you may override\n"
"the default and change the user name. The next step is to enter a password.\n"
"From a security point of view, a non-privileged (regular) user password is\n"
"not as crucial as the \"root\" password, but that's no reason to neglect it\n"
"by making it blank or too simple: after all, your files could be the ones\n"
"at risk.\n"
"\n"
"Once you click on \"%s\", you can add other users. Add a user for each one\n"
"of your friends, your father, your sister, etc. Click \"%s\" when you're\n"
"finished adding users.\n"
"\n"
"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
"that user (bash by default).\n"
"\n"
"When you're finished adding users, you'll be asked to choose a user who\n"
"will be automatically logged into the system when the computer boots up. If\n"
"you're interested in that feature (and do not care much about local\n"
"security), choose the desired user and window manager, then click on\n"
"\"%s\". If you're not interested in this feature, uncheck the \"%s\" box."
msgstr ""
"GNU/Linux 是多用户系统, 这意味着每个用户可拥有自己独立的首选项, 以及自己的文"
"件, 等等。若要了解关于多用户系统的更多内容, 建议您阅读\n"
"``初学者指南''。但是与系统管理员 \"root\"\n"
"不同, 您在此处添加的用户所能做的更改将仅限于他们自己的文件及他们自己的配置, "
"这可使系统免遭有意无意的破坏。您至少需要为您自己创建一个普通用户 --\n"
"这应该是您每天所使用的主要账户。尽管以 \"root\"\n"
"登录很容易, 您可以不受任何限制的完成任何操作, 但这很危险!非常低级的错误就可"
"能让您的系统再也无法启动。如果您以普通用户的身份犯了非常危险的错误, 最坏的情"
"况也就是丢失某些信息, 而不会影响整个系统。\n"
"\n"
"第一个域会询问您的真实姓名。当然, 这并不是必需的 -- 您当然可以输入您喜欢的任"
"何内容。DrakX\n"
"将会使用您在此域中输入的第一个单词作为\"%s\"域的初始值, 即此用户登录系统所用"
"的名称。如果您喜欢的话, 您也可以不使用默认值, 而换用您喜欢的用户名。下一步就"
"是输入密码。从安全的角度来说, 非特权(普通)用户密码并没有\n"
"\"root\" 密码那么需要保密, 但是也没有理由忽视这个密码, 而将其留空或设置得太简"
"单: 反正, 您自己的文件将会是最危险的。\n"
"\n"
"您单击\"%s\"之后, 您还可以添加其它用户。可以为您的每个朋友添加一个用户: 例"
"如, 您的父亲或您的妹妹。当您添加完用户之后, 请单击\"%s\"。\n"
"\n"
"单击\"%s\"按钮允许您更改该用户的默认 \"shell\"(默认为 bash)。\n"
"\n"
"\n"
"当您添加完用户之后, 您可以从中选择一个用户, 计算机启动后将自动以该用户的身份"
"登录到系统。如果您对此特性感兴趣(也不考虑太多的本地安全性), 请选择希望的用户"
"和窗口管理器, 然后单击\"%s\"。如果您对此特性不感兴趣, 请不要选中\"%s\"框。"
#: help.pm:51 printer/printerdrake.pm:1887 printer/printerdrake.pm:2008
#: standalone/draksambashare:54
#, c-format
msgid "User name"
msgstr "用户名"
#: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
#: network/thirdparty.pm:383 printer/printerdrake.pm:3973
#: standalone/drakTermServ:384 standalone/drakbackup:3952
#: standalone/drakbackup:4046 standalone/drakbackup:4063
#: standalone/drakbackup:4081 ugtk2.pm:490
#, c-format
msgid "Next"
msgstr "下一步"
#: help.pm:51
#, c-format
msgid "Do you want to use this feature?"
msgstr "您要使用此特性吗?"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:54
#, c-format
msgid ""
"Listed here are the existing Linux partitions detected on your hard drive.\n"
"You can keep the choices made by the wizard, since they are good for most\n"
"common installations. If you make any changes, you must at least define a\n"
"root partition (\"/\"). Do not choose too small a partition or you will not\n"
"be able to install enough software. If you want to store your data on a\n"
"separate partition, you will also need to create a \"/home\" partition\n"
"(only possible if you have more than one Linux partition available).\n"
"\n"
"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
"\n"
"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc."
msgstr ""
"在此列出了您硬盘上已有的 Linux\n"
"分区。您可以保留向导所作的选择, 因为对于大多数安装来说这一选择是较好的。如果"
"您想要进行更改的话, 您必须至少定义一个根分区(\"/\")。不要选择太小的分区, 否则"
"您可能无法安装足够的软件。如果您想要将您的数据存放在单独的分区中, 您还需要创"
"建一个\n"
"\"/home\" 分区(仅当您有多于一个 Linux 分区时才可用)。\n"
"\n"
"每个分区都按下列格式列出: \"名称\", \"容量\"。\n"
"\n"
"\"名称\"结构为: \"硬盘类型\", \"硬盘编号\", \"分区编号\"(例如, \"hda1\")。\n"
"\n"
"\"硬盘类型\"取决于硬盘的接口方式。如您的硬盘是 IDE 硬盘, 则\"硬盘类型\"就为"
"\"hd\";若硬盘为 SCSI 硬盘, 就为\"sd\"。\n"
"\n"
"\"硬盘编号\"就是在\"hd\"或\"sd\"后面的那个字母。对于IDE硬盘: \n"
"\n"
" * \"a\"意味着\"主 IDE 控制器的主硬盘\";\n"
"\n"
" * \"b\"意味着\"主 IDE 控制器的从硬盘\";\n"
"\n"
" * \"c\"意味着\"从 IDE 控制器的主硬盘\";\n"
"\n"
" * \"d\"意味着\"从IDE控制器的从硬盘\"。\n"
"\n"
"对于 SCSI 硬盘, \"a\"意味着\"最低的 SCSI ID\", \"b\"意味着\"第二低的 SCSI ID"
"\", 依此类推。"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:85
#, c-format
msgid ""
"The Mandriva Linux installation is distributed on several CD-ROMs. If a\n"
"selected package is located on another CD-ROM, DrakX will eject the current\n"
"CD and ask you to insert the required one. If you do not have the requested\n"
"CD at hand, just click on \"%s\", the corresponding packages will not be\n"
"installed."
msgstr ""
"Mandriva Linux 安装分布于多张 CD-ROM 中。如果选中软件包位于另外的 CD-ROM, "
"DrakX 将弹出当前\n"
"CD, 并要求您插入所需的正确 CD。如果您手中没有所请求的 CD, 只需单击\"%s\", 就"
"不会安装相应的软件包了。"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:92
#, c-format
msgid ""
"It's now time to specify which programs you wish to install on your system.\n"
"There are thousands of packages available for Mandriva Linux, and to make "
"it\n"
"simpler to manage, they have been placed into groups of similar\n"
"applications.\n"
"\n"
"Mandriva Linux sorts package groups in four categories. You can mix and\n"
"match applications from the various categories, so a ``Workstation''\n"
"installation can still have applications from the ``Server'' category\n"
"installed.\n"
"\n"
" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
"more of the groups in the workstation category.\n"
"\n"
" * \"%s\": if you plan on using your machine for programming, select the\n"
"appropriate groups from that category. The special \"LSB\" group will\n"
"configure your system so that it complies as much as possible with the\n"
"Linux Standard Base specifications.\n"
"\n"
" Selecting the \"LSB\" group will also install the \"2.4\" kernel series,\n"
"instead of the default \"2.6\" one. This is to ensure 100%%-LSB compliance\n"
"of the system. However, if you do not select the \"LSB\" group you will\n"
"still have a system which is nearly 100%% LSB-compliant.\n"
"\n"
" * \"%s\": if your machine is intended to be a server, select which of the\n"
"more common services you wish to install on your machine.\n"
"\n"
" * \"%s\": this is where you will choose your preferred graphical\n"
"environment. At least one must be selected if you want to have a graphical\n"
"interface available.\n"
"\n"
"Moving the mouse cursor over a group name will display a short explanatory\n"
"text about that group.\n"
"\n"
"You can check the \"%s\" box, which is useful if you're familiar with the\n"
"packages being offered or if you want to have total control over what will\n"
"be installed.\n"
"\n"
"If you start the installation in \"%s\" mode, you can deselect all groups\n"
"and prevent the installation of any new packages. This is useful for\n"
"repairing or updating an existing system.\n"
"\n"
"If you deselect all groups when performing a regular installation (as\n"
"opposed to an upgrade), a dialog will pop up suggesting different options\n"
"for a minimal installation:\n"
"\n"
" * \"%s\": install the minimum number of packages possible to have a\n"
"working graphical desktop.\n"
"\n"
" * \"%s\": installs the base system plus basic utilities and their\n"
"documentation. This installation is suitable for setting up a server.\n"
"\n"
" * \"%s\": will install the absolute minimum number of packages necessary\n"
"to get a working Linux system. With this installation you will only have a\n"
"command-line interface. The total size of this installation is about 65\n"
"megabytes."
msgstr ""
"现在该指定要在您的系统中安装哪些程序了。Mandriva Linux\n"
"为您准备了数千个软件包。而为了使管理软件包更加容易, 软件包已经按相似程度分成"
"了多个组。\n"
"\n"
"Mandriva Linux\n"
"按四个类别对软件包进行了分类。您可以从不同的类别混合选择应用程序。也就是说, "
"``工作站''中也可以选择安装``服务器''分类中的应用程序。\n"
"\n"
" * \"%s\":如果您计划将您的计算机用作工作站, 请选择工作站分类中的一个或多个"
"组。\n"
"\n"
" * \"%s\":如果您计划使用您的计算机进行编程, 请从该类别中选择相应的组。特殊"
"的 \"LSB\"\n"
"组将会对您的系统进行配置, 这样所编译的结果将会尽可能遵从 Linux 标准基础(LSB)"
"规范。\n"
"\n"
" 选择 \"LSB\" 组将安装 \"2.4\" 内核系列, 而不是默认的 \"2.6\" 内核。这是为"
"了保证系统能够百分之百的遵从\n"
"LSB。但是, 即便您不选择 \"LSB\" 组, 您也会得到一个接近百分之百遵从 LSB 的系"
"统。\n"
"\n"
" * \"%s\":如果您的计算机即将成为服务器, 请选择您想要安装在计算机上的公共服"
"务。\n"
"\n"
" * \"%s\":这里您可以选择您首选的图形环境。如果您想要使用图形界面, 则至少要选"
"择其中一个。\n"
"\n"
"将鼠标光标移动到组名之上, 您会看到该组的简要描述文字。\n"
"\n"
"如果您对所提供的软件包比较熟悉, 或者您想要完全控制安装什么软件包, 就可以选中"
"\"%s\"选项。\n"
"\n"
"如果您以\"%s\"模式启动安装, 您可以不选择任何组, 这样可以避免安装任何新软件"
"包。这对于修复或升级已有系统很有帮助。\n"
"\n"
"如果您在执行常规安装(与升级相对)的时候一个组也没有选中, 会弹出一个对话框建议"
"最小安装的不同选项:\n"
"\n"
" * \"%s\":安装图形桌面所需的最少软件包。\n"
"\n"
" * \"%s\":安装基本系统, 另加基本工具及相应文档。此安装适合建立服务器。\n"
"\n"
" * \"%s\":将安装使 Linux 系统能够正常运行的最少软件包。使用此安装, 您仅仅有"
"命令行界面。此安装的总计大小为约 65 兆字节。"
#: help.pm:146 share/compssUsers.pl:24
#, c-format
msgid "Workstation"
msgstr "工作站"
#: help.pm:146 share/compssUsers.pl:65 share/compssUsers.pl:167
#: share/compssUsers.pl:169
#, c-format
msgid "Development"
msgstr "开发"
#: help.pm:146 share/compssUsers.pl:145
#, c-format
msgid "Graphical Environment"
msgstr "图形环境"
#: help.pm:146 install_steps_gtk.pm:235 install_steps_interactive.pm:646
#, c-format
msgid "Individual package selection"
msgstr "选择单个软件包"
#: help.pm:146 help.pm:588
#, c-format
msgid "Upgrade"
msgstr "升级"
#: help.pm:146 install_steps_interactive.pm:604
#, c-format
msgid "With X"
msgstr "安装 X"
#: help.pm:146
#, c-format
msgid "With basic documentation"
msgstr "安装基础文档"
#: help.pm:146
#, c-format
msgid "Truly minimal install"
msgstr "真正的最小安装"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:149
#, c-format
msgid ""
"If you choose to install packages individually, the installer will present\n"
"a tree containing all packages classified by groups and subgroups. While\n"
"browsing the tree, you can select entire groups, subgroups, or individual\n"
"packages.\n"
"\n"
"Whenever you select a package on the tree, a description will appear on the\n"
"right to let you know the purpose of that package.\n"
"\n"
"!! If a server package has been selected, either because you specifically\n"
"chose the individual package or because it was part of a group of packages,\n"
"you'll be asked to confirm that you really want those servers to be\n"
"installed. By default Mandriva Linux will automatically start any installed\n"
"services at boot time. Even if they are safe and have no known issues at\n"
"the time the distribution was shipped, it is entirely possible that\n"
"security holes were discovered after this version of Mandriva Linux was\n"
"finalized. If you do not know what a particular service is supposed to do "
"or\n"
"why it's being installed, then click \"%s\". Clicking \"%s\" will install\n"
"the listed services and they will be started automatically at boot time. !!\n"
"\n"
"The \"%s\" option is used to disable the warning dialog which appears\n"
"whenever the installer automatically selects a package to resolve a\n"
"dependency issue. Some packages depend on others and the installation of\n"
"one particular package may require the installation of another package. The\n"
"installer can determine which packages are required to satisfy a dependency\n"
"to successfully complete the installation.\n"
"\n"
"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
"package list created during a previous installation. This is useful if you\n"
"have a number of machines that you wish to configure identically. Clicking\n"
"on this icon will ask you to insert the floppy disk created at the end of\n"
"another installation. See the second tip of the last step on how to create\n"
"such a floppy."
msgstr ""
"如果您选中了想要选择单个软件包, 安装程序会显示出一个软件包的树形结构, 其中会"
"按照组和子组分类显示全部软件包。浏览软件包树时, 您可以选择整个组, 子组或单个"
"软件包。\n"
"\n"
"只要您在左侧的树中选择了软件包, 右侧就会出现该软件包用途的描述。\n"
"\n"
"!!\n"
"如果选择了服务器软件包, 不管是您特意选中的, 还是因为该软件包是某组的成员, 您"
"都需要确认是否真的想要安装这些服务器。默认情况下, Mandriva Linux\n"
"会在启动时自动启动已安装的全部服务。尽管在发行版送出时这些服务是安全的, 但完"
"全有可能在此版本 Mandriva Linux\n"
"完成后发现了相应软件的安全漏洞。如果您并不知道特定服务的用途, 或者不知道为什"
"么要安装这些服务, 请单击\"%s\"。单击\"%s\"将安装列出的服务, 并且启动时这些服"
"务会被自动启动。\n"
"!!\n"
"\n"
"\n"
"\"%s\"选项用于在安装程序自动选择软件包以解决依赖性问题时禁止弹出警告对话框。"
"某些软件包会依赖其它软件包, 而要安装一个软件包的需要先安装另外一个软件包。安"
"装程序会自动确定要满足依赖性需要安装哪些软件包, 以便顺利完成安装。\n"
"\n"
"\n"
"列表底部的小软盘图标允许您装入先前安装时创建的软件包列表。如果您一次想要配置"
"多台计算机, 此选项可能非常有用。单击此图标后, 您需要插入另外一次安装结束后创"
"建的那张软盘。参看最后一步的第二条提示, 其中描述了如何创建这样的软盘。"
#: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:945
#: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2515
#: standalone/draksec:54 standalone/harddrake2:312 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "No"
msgstr "否"
#: help.pm:180 help.pm:285 help.pm:444 install_any.pm:945 interactive.pm:161
#: modules/interactive.pm:71 printer/printerdrake.pm:883
#: printer/printerdrake.pm:898 standalone/drakbackup:2515
#: standalone/draksec:55 standalone/harddrake2:311 ugtk2.pm:898 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "是"
#: help.pm:180
#, c-format
msgid "Automatic dependencies"
msgstr "自动依赖性"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:183
#, c-format
msgid ""
"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
"information on how to set up a new printer. The interface presented in our\n"
"manual is similar to the one used during installation."
msgstr ""
"\"%s\":单击\"%s\"按钮将打开打印机配置向导。请参看``初学者指南''中的相应章"
"节, 其中详细描述了如何设置新打印机。那里给出的界面与安装时所用的界面大体相"
"同。"
#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
#: standalone/drakbackup:2339 standalone/drakbackup:2343
#: standalone/drakbackup:2347 standalone/drakbackup:2351
#: standalone/drakroam:227
#, c-format
msgid "Configure"
msgstr "配置"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:189
#, c-format
msgid ""
"This dialog is used to select which services you wish to start at boot\n"
"time.\n"
"\n"
"DrakX will list all services available on the current installation. Review\n"
"each one of them carefully and uncheck those which are not needed at boot\n"
"time.\n"
"\n"
"A short explanatory text will be displayed about a service when it is\n"
"selected. However, if you're not sure whether a service is useful or not,\n"
"it is safer to leave the default behavior.\n"
"\n"
"!! At this stage, be very careful if you intend to use your machine as a\n"
"server: you probably do not want to start any services which you do not "
"need.\n"
"Please remember that some services can be dangerous if they're enabled on a\n"
"server. In general, select only those services you really need. !!"
msgstr ""
"此对话框可让您选择启动时要启动哪些服务。\n"
"\n"
"DrakX 将会列出本次安装所有可用的服务。请仔细检查, 并且去掉那些在启动时不总需"
"要的服务。\n"
"\n"
"将您的鼠标移动到选项上面会弹出帮助提示, 解释这个服务的作用。不过, 如果您不确"
"定某一个服务到底是否需要, 还是保留默认设置会比较安全。\n"
"\n"
"!!\n"
"如果您的机器将作为服务器, 在这一步请格外小心:请不要启动任何您不需要的服务。"
"请不要忘了, 如果在服务器上启用了某些服务, 这些服务可能对服务器造成潜在的危"
"险。通常, 只选择您确实要使用的那些服务。\n"
"!!"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:206
#, c-format
msgid ""
"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
"local time according to the time zone you selected. If the clock on your\n"
"motherboard is set to local time, you may deactivate this by unselecting\n"
"\"%s\", which will let GNU/Linux know that the system clock and the\n"
"hardware clock are in the same time zone. This is useful when the machine\n"
"also hosts another operating system.\n"
"\n"
"The \"%s\" option will automatically regulate the system clock by\n"
"connecting to a remote time server on the Internet. For this feature to\n"
"work, you must have a working Internet connection. We recommend that you\n"
"choose a time server located near you. This option actually installs a time\n"
"server which can be used by other machines on your local network as well."
msgstr ""
"GNU/Linux 以 GMT (格林威治标准时)管理时间, 并根据您所选的时区将其翻译为本地时"
"间。如果您主板上的时钟设定为本地时间, 您应当关闭\n"
"\"%s\", 这将会让 GNU/Linux 知道系统始终和硬件时钟在同一时区。如果本计算机仍然"
"运行其它操作系统, 如\n"
"Windows, 则此设置将十分有用。\n"
"\n"
"\"%s\"选项将连接到 Internet 上的远程时间服务器自动校准系统时钟。要让此特性正"
"常工作, 您必须连接到\n"
"Internet。最好选择地理位置离您较近的时间服务器。此选项还会自动安装时间服务"
"器, 这样您局域网中的其它计算机都能够进行自动校时了。"
#: help.pm:217 install_steps_interactive.pm:888
#, c-format
msgid "Hardware clock set to GMT"
msgstr "您的系统时钟设定为 GMT"
#: help.pm:217
#, c-format
msgid "Automatic time synchronization"
msgstr "自动时间同步"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:220
#, c-format
msgid ""
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs."
msgstr ""
"显示卡\n"
"\n"
" 安装程序通常可以自动检测并配置连接到计算机上的显示卡。如果检测的结果不对, "
"您可以在此列表中选择您所实际使用的显示卡。\n"
"\n"
" 如果您的显示卡支持不同的服务器, 为了选择是否要启用 3D 加速, 您应该在这里选"
"择符合您需要的服务器。"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:231
#, c-format
msgid ""
"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
"WindowMaker, etc.) bundled with Mandriva Linux rely upon.\n"
"\n"
"You'll see a list of different parameters to change to get an optimal\n"
"graphical display.\n"
"\n"
"Graphic Card\n"
"\n"
" The installer will normally automatically detect and configure the\n"
"graphic card installed on your machine. If this is not correct, you can\n"
"choose from this list the card you actually have installed.\n"
"\n"
" In the situation where different servers are available for your card,\n"
"with or without 3D acceleration, you're asked to choose the server which\n"
"best suits your needs.\n"
"\n"
"\n"
"\n"
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer.\n"
"\n"
"\n"
"\n"
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture.\n"
"\n"
"\n"
"\n"
"Test\n"
"\n"
" Depending on your hardware, this entry might not appear.\n"
"\n"
" The system will try to open a graphical screen at the desired\n"
"resolution. If you see the test message during the test and answer \"%s\",\n"
"then DrakX will proceed to the next step. If you do not see it, then it\n"
"means that some part of the auto-detected configuration was incorrect and\n"
"the test will automatically end after 12 seconds and return you to the\n"
"menu. Change settings until you get a correct graphical display.\n"
"\n"
"\n"
"\n"
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"X(代表 X 窗口系统)是 GNU/Linux 图形界面的核心部分。Mandriva Linux\n"
"附带的所有图形环境(KDE、GNOME、AfterStep、WindowMaker 等)都依赖于该系统。\n"
"\n"
"您将会看到不同的参数列表, 以便进行图形显示选项的更改来达到最佳状态。其中包"
"括:\n"
"\n"
"显示卡\n"
"\n"
" 安装程序通常可以自动检测并配置连接到计算机上的显示卡。如果检测的结果不对, "
"您可以在此列表中选择您所实际使用的显示卡。\n"
"\n"
" 如果您的显示卡支持不同的服务器, 为了选择是否要启用 3D 加速, 您应该在这里选"
"择符合您需要的服务器。\n"
"\n"
"\n"
"\n"
"显示器\n"
"\n"
" 安装程序通常可以自动检测并配置连接到计算机上的显示器。如果检测的结果不对, "
"您可以在此列表中选择您所实际使用的显示器。\n"
"\n"
"\n"
"\n"
"分辨率\n"
"\n"
" \n"
"您可以在此选择分辨率和颜色深度, 但您的显示卡硬件要支持。请选择最适合您需要的"
"选项(您在安装完成之后仍可进行修改)。所选配置的例子会显示在显示器上。\n"
"\n"
"\n"
"\n"
"测试\n"
"\n"
" 根据您的硬件, 此项可能不会出现。\n"
"\n"
" 系统将会以所选的分辨率打开图形屏幕。如果您在测试时看到了提示, 请回答\"%s"
"\", DrakX\n"
"就会执行安装的下一步骤。如果您没有看到任何提示, 这意味着自动检测的某一部分不"
"正确, 测试将会在 12\n"
"秒后自动结束, 并把您带回菜单。请更改设置, 直到您能够看到正确的图形显示为"
"止。\n"
"\n"
"\n"
"\n"
"选项\n"
"\n"
" 您可以在此选择是否想要在计算机启动的时候就切换到图形界面。显然, 如果本机将"
"用作服务器, 或者您的显示配置还没有成功, 您可能想要选择\"%s\"。"
#: help.pm:288
#, c-format
msgid ""
"Monitor\n"
"\n"
" Normally the installer will automatically detect and configure the\n"
"monitor connected to your machine. If it is not correct, you can choose\n"
"from this list the monitor which is connected to your computer."
msgstr ""
"显示器\n"
"\n"
" 安装程序通常可以自动检测并配置连接到计算机上的显示器。如果不幸您的显示器未"
"被检测出来, 您可以在此列表中选择您所实际使用的显示器。"
#: help.pm:295
#, c-format
msgid ""
"Resolution\n"
"\n"
" Here you can choose the resolutions and color depths available for your\n"
"graphics hardware. Choose the one which best suits your needs (you will be\n"
"able to make changes after the installation). A sample of the chosen\n"
"configuration is shown in the monitor picture."
msgstr ""
"分辨率\n"
"\n"
" 您可以在此选择分辨率和颜色深度, 但您的硬件要支持。请选择最适合您需要的选项"
"(您在安装完成之后仍可进行修改)。所选配置的例子会显示在显示器上。"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:303
#, c-format
msgid ""
"In the situation where different servers are available for your card, with\n"
"or without 3D acceleration, you're asked to choose the server which best\n"
"suits your needs."
msgstr ""
"如果您的显示卡支持不同的服务器, 为了选择是否要启用 3D 加速, 您应该在这里选择"
"符合您需要的服务器。"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:308
#, c-format
msgid ""
"Options\n"
"\n"
" This steps allows you to choose whether you want your machine to\n"
"automatically switch to a graphical interface at boot. Obviously, you may\n"
"want to check \"%s\" if your machine is to act as a server, or if you were\n"
"not successful in getting the display configured."
msgstr ""
"选项\n"
"\n"
" 您可以在此选择是否想要在计算机启动的时候就切换到图形界面。显然, 如果本机将"
"用作服务器, 或者您的显示配置还没有成功, 您可能想要选择\"%s\"。"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:316
#, c-format
msgid ""
"You now need to decide where you want to install the Mandriva Linux\n"
"operating system on your hard drive. If your hard drive is empty or if an\n"
"existing operating system is using all the available space you will have to\n"
"partition the drive. Basically, partitioning a hard drive means to\n"
"logically divide it to create the space needed to install your new\n"
"Mandriva Linux system.\n"
"\n"
"Because the process of partitioning a hard drive is usually irreversible\n"
"and can lead to data losses, partitioning can be intimidating and stressful\n"
"for the inexperienced user. Fortunately, DrakX includes a wizard which\n"
"simplifies this process. Before continuing with this step, read through the\n"
"rest of this section and above all, take your time.\n"
"\n"
"Depending on the configuration of your hard drive, several options are\n"
"available:\n"
"\n"
" * \"%s\". This option will perform an automatic partitioning of your blank\n"
"drive(s). If you use this option there will be no further prompts.\n"
"\n"
" * \"%s\". The wizard has detected one or more existing Linux partitions on\n"
"your hard drive. If you want to use them, choose this option. You will then\n"
"be asked to choose the mount points associated with each of the partitions.\n"
"The legacy mount points are selected by default, and for the most part it's\n"
"a good idea to keep them.\n"
"\n"
" * \"%s\". If Microsoft Windows is installed on your hard drive and takes\n"
"all the space available on it, you will have to create free space for\n"
"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
"data, provided you've previously defragmented the Windows partition.\n"
"Backing up your data is strongly recommended. Using this option is\n"
"recommended if you want to use both Mandriva Linux and Microsoft Windows on\n"
"the same computer.\n"
"\n"
" Before choosing this option, please understand that after this\n"
"procedure, the size of your Microsoft Windows partition will be smaller\n"
"than when you started. You'll have less free space under Microsoft Windows\n"
"to store your data or to install new software.\n"
"\n"
" * \"%s\". If you want to delete all data and all partitions present on\n"
"your hard drive and replace them with your new Mandriva Linux system, "
"choose\n"
"this option. Be careful, because you will not be able to undo this "
"operation\n"
"after you confirm.\n"
"\n"
" !! If you choose this option, all data on your disk will be deleted. !!\n"
"\n"
" * \"%s\". This option appears when the hard drive is entirely taken by\n"
"Microsoft Windows. Choosing this option will simply erase everything on the\n"
"drive and begin fresh, partitioning everything from scratch.\n"
"\n"
" !! If you choose this option, all data on your disk will be lost. !!\n"
"\n"
" * \"%s\". Choose this option if you want to manually partition your hard\n"
"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
"easily lose all your data. That's why this option is really only\n"
"recommended if you have done something like this before and have some\n"
"experience. For more instructions on how to use the DiskDrake utility,\n"
"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
"在这一步里, 您需要决定您想要将 Mandriva Linux\n"
"操作系统安装到硬盘的何处。如果您的硬盘完全是空的, 或者已有操作系统使用了所有"
"的空间, 您就必须要对硬盘进行分区。粗略的说, 对硬盘进行分区就是将其划分成几个"
"逻辑上不同的部分, 以便创建安装您新的\n"
"Mandriva Linux 系统所需的空间。\n"
"\n"
"由于对硬盘进行分区通常是不可恢复的, 并且可能导致数据丢失, 所以对于没有经验的"
"用户来说, 分区是十分危险的操作。所幸的是, DrakX\n"
"所包含的向导能够显著简化这一过程。在继续这一步骤之前, 请花点时间仔细阅读本节"
"及以上的所有内容。\n"
"\n"
"根据您的硬盘配置不同, 您可从以下选项中加以选择:\n"
"\n"
" * \"%s\"。此选项将对您的空驱动器执行自动分区。如果您使用此选项, 则不会有任何"
"后续的提示。\n"
"\n"
" * \"%s\"。向导检测到了硬盘上有一个或多个已有的 Linux\n"
"分区。如果您想要使用这些分区, 请选择此选项。稍后, 安装程序会让您选择与每个分"
"区关联的挂载点。先前的挂载点默认已经选中了, 而保留这些选项是个不错的主意。\n"
"\n"
" * \"%s\"。如果在您的硬盘上安装了 Microsoft Windows, 而该操作系统占用了所有的"
"空间, 您就需要为 GNU/Linux\n"
"创建剩余空间。要完成这一操作, 您可以删除您的 Microsoft Windows 分区和数据(参"
"看``删除整个磁盘''方案), 或者更改\n"
"Microsoft Windows FAT 或 NTFS 分区的大小。更改分区大小通常不会造成任何数据丢"
"失, 但您必须事先对 Windows\n"
"分区进行了磁盘碎片整理。我们强烈推荐您事先备份您的数据。如果您想要在同一台计"
"算机上使用 Mandriva Linux 和 Microsoft\n"
"Windows, 则推荐使用此选项。\n"
"\n"
" 注意, 在执行这一过程之后, 您原有的 Microsoft Windows 分区将会比先前小一"
"些。而您在 Microsoft Windows\n"
"下可用来存储数据或安装新软件的剩余空间也会变少。\n"
"\n"
" * \"%s\"。如果您想要删除硬盘上的全部数据和全部分区, 并将其替换为全新的 "
"Mandriva Linux\n"
"系统, 请选择此选项。请额外小心, 因为在您确认之后, 此操作无法撤销。\n"
"\n"
" !! 如果您选择了此选项, 您硬盘上的全部数据都将被删除。 !!\n"
"\n"
" * \"%s\"。当硬盘完全被 Microsoft Windows 占用时, 会出现此选项。选择此选项将"
"删除硬盘上的全部内容, 然后从头开始进行分区。\n"
"\n"
" !! 如果您选择了此选项, 您硬盘上的全部数据都将被删除。 !!\n"
"\n"
" *\n"
"\"%s\"。如果您想要手动对您的硬盘进行分区, 请选择此选项。请额外小心——该功能十"
"分强大, 但也很危险, 您可能在不经意之间毁掉您的全部数据。这也正是为什么我们只"
"对那些以前执行过类似操作并有些经验的用户才推荐此选项的原因。要获得关于如何使"
"用\n"
"DiskDrake 工具的更多说明, 请参阅``初学者指南''一书中的``管理您的分区''一节。"
#: help.pm:374 install_interactive.pm:95
#, c-format
msgid "Use free space"
msgstr "使用空闲空间"
#: help.pm:374
#, c-format
msgid "Use existing partition"
msgstr "使用已有分区"
#: help.pm:374 install_interactive.pm:137
#, c-format
msgid "Use the free space on the Windows partition"
msgstr "使用在 Windows 分区上的空闲空间"
#: help.pm:374 install_interactive.pm:213
#, c-format
msgid "Erase entire disk"
msgstr "清除整个磁盘"
#: help.pm:374
#, c-format
msgid "Remove Windows"
msgstr "删除 Windows"
#: help.pm:374 install_interactive.pm:228
#, c-format
msgid "Custom disk partitioning"
msgstr "自定义磁盘分区"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:377
#, c-format
msgid ""
"There you are. Installation is now complete and your GNU/Linux system is\n"
"ready to be used. Just click on \"%s\" to reboot the system. Do not forget\n"
"to remove the installation media (CD-ROM or floppy). The first thing you\n"
"should see after your computer has finished doing its hardware tests is the\n"
"boot-loader menu, giving you the choice of which operating system to start.\n"
"\n"
"The \"%s\" button shows two more buttons to:\n"
"\n"
" * \"%s\": enables you to create an installation floppy disk which will\n"
"automatically perform a whole installation without the help of an operator,\n"
"similar to the installation you've just configured.\n"
"\n"
" Note that two different options are available after clicking on that\n"
"button:\n"
"\n"
" * \"%s\". This is a partially automated installation. The partitioning\n"
"step is the only interactive procedure.\n"
"\n"
" * \"%s\". Fully automated installation: the hard disk is completely\n"
"rewritten, all data is lost.\n"
"\n"
" This feature is very handy when installing on a number of similar\n"
"machines. See the Auto install section on our web site for more\n"
"information.\n"
"\n"
" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
"To use this selection with another installation, insert the floppy and\n"
"start the installation. At the prompt, press the [F1] key, type >>linux\n"
"defcfg=\"floppy\"<< and press the [Enter] key.\n"
"\n"
"(*) You need a FAT-formatted floppy. To create one under GNU/Linux, type\n"
"\"mformat a:\", or \"fdformat /dev/fd0\" followed by \"mkfs.vfat\n"
"/dev/fd0\"."
msgstr ""
"现在安装已经完成, 您的 GNU/Linux 系统已经可以使用了。只需单击\"%s\"就可重新启"
"动系统。别忘了取出安装介质(CD-ROM\n"
"或软盘)。在计算机完成硬件测试后, 您所看到的第一个系统自检完后的屏幕就是引导菜"
"单, 您可以从中选择要启动哪个操作系统。\n"
"\n"
"\"%s\"按钮显示了两个额外的按钮, 可:\n"
"\n"
" * \"%s\":创建一张安装软盘。该软盘可在无人值守的情况下, 按照您刚才的设置重新"
"安装一个类似的系统。\n"
"\n"
" 请注意, 单击按钮后会出现两个不同的选项:\n"
"\n"
" * \"%s\"。 半自动安装。只有分区部分是交互的。\n"
"\n"
" * \"%s\"。 全自动安装:硬盘会被完全重写, 所有数据都将丢失。\n"
"\n"
" 如果有一大批相同的机器要安装, 这个功能非常方便。请参考我们网站上的自动安装"
"一节中的更多信息。\n"
"\n"
" * \"%s\"(*):把您刚才选择的软件包记录在软盘上。要使用本次的安装包执行另外一"
"次安装, 请插入软盘然后开始安装。出现提示的时候, 按 [F1]\n"
"键, 输入 >>linux defcfg=\"floppy\" <<。\n"
"\n"
"(*) 您需要一张 FAT 格式的软盘。要在 GNU/Linux 下创建一张这样的软盘, 一种方法"
"是输入 \"mformat a:\";另一种是首先\n"
"\"fdformat /dev/fd0\", 然后 \"mkfs.vfat /dev/fd0\"。"
#: help.pm:409
#, c-format
msgid "Generate auto-install floppy"
msgstr "生成自动安装软盘"
#: help.pm:409 install_steps_interactive.pm:1343
#, c-format
msgid "Replay"
msgstr "重现"
#: help.pm:409 install_steps_interactive.pm:1343
#, c-format
msgid "Automated"
msgstr "自动"
#: help.pm:409 install_steps_interactive.pm:1346
#, c-format
msgid "Save packages selection"
msgstr "保存软件包选择"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:412
#, c-format
msgid ""
"If you chose to reuse some legacy GNU/Linux partitions, you may wish to\n"
"reformat some of them and erase any data they contain. To do so, please\n"
"select those partitions as well.\n"
"\n"
"Please note that it's not necessary to reformat all pre-existing\n"
"partitions. You must reformat the partitions containing the operating\n"
"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to "
"reformat\n"
"partitions containing data that you wish to keep (typically \"/home\").\n"
"\n"
"Please be careful when selecting partitions. After the formatting is\n"
"completed, all data on the selected partitions will be deleted and you\n"
"will not be able to recover it.\n"
"\n"
"Click on \"%s\" when you're ready to format the partitions.\n"
"\n"
"Click on \"%s\" if you want to choose another partition for your new\n"
"Mandriva Linux operating system installation.\n"
"\n"
"Click on \"%s\" if you wish to select partitions which will be checked for\n"
"bad blocks on the disk."
msgstr ""
"如果您想要重用某些现有的 GNU/Linux\n"
"分区, 您可能想要先格式化其中的一些分区, 并删除这些分区中的全部数据。如果您希"
"望这么做的话, 请同时选中这些分区。\n"
"\n"
"请注意, 没有必要重新格式化已有的全部分区。您必须重新格式化包含操作系统的分区"
"(比如 \"/\", \"/usr\" 或\n"
"\"/var\"), 而无需重新格式化包含您想要保留的数据的分区(典型的如 \"/home\")。\n"
"\n"
"请在选择分区时额外小心。格式化后, 选中分区的全部数据都将被删除, 您也无法进行"
"恢复。\n"
"\n"
"如果您准备好格式化分区了, 请单击\"%s\"。\n"
"\n"
"如果您想要选择其它分区用于安装 Mandriva Linux 操作系统, 请单击\"%s\"。\n"
"\n"
"如果您想要选择要检测磁盘上的坏块, 请单击单击\"%s\"。"
#: help.pm:431 install_steps_gtk.pm:392 interactive.pm:437
#: interactive/newt.pm:318 printer/printerdrake.pm:3971
#: standalone/drakTermServ:363 standalone/drakbackup:3912
#: standalone/drakbackup:3951 standalone/drakbackup:4062
#: standalone/drakbackup:4077 ugtk2.pm:488
#, c-format
msgid "Previous"
msgstr "上一步"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:434
#, c-format
msgid ""
"By the time you install Mandriva Linux, it's likely that some packages will\n"
"have been updated since the initial release. Bugs may have been fixed,\n"
"security issues resolved. To allow you to benefit from these updates,\n"
"you're now able to download them from the Internet. Check \"%s\" if you\n"
"have a working Internet connection, or \"%s\" if you prefer to install\n"
"updated packages later.\n"
"\n"
"Choosing \"%s\" will display a list of web locations from which updates can\n"
"be retrieved. You should choose one near to you. A package-selection tree\n"
"will appear: review the selection, and press \"%s\" to retrieve and install\n"
"the selected package(s), or \"%s\" to abort."
msgstr ""
"在您安装 Mandriva Linux\n"
"的这个时候, 很可能有些软件包在发行之后已经更新。有些故障已经被修正, 有些安全"
"问题已经被解决。为了让您能够享用这些更新, 您现在可以从 Internet\n"
"上下载它们。如果您的 Internet 连接已经可以使用, 请选择\"%s\"。如果您愿意以后"
"再升级, 请选择\"%s\"。\n"
"\n"
"\n"
"选择\"%s\"将显示一个清单, 其中列出的地方都提供了更新软件包。您应该选择离您地"
"理位置较近的镜像。之后会出现一个可以下载的软件包选择树:复查选项, 然后单击\"%"
"s\"来获取并安装选中的软件包, 要终止请单击\"%s\"。"
#: help.pm:444 help.pm:588 install_steps_gtk.pm:391
#: install_steps_interactive.pm:157 standalone/drakbackup:4109
#, c-format
msgid "Install"
msgstr "安装"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:447
#, c-format
msgid ""
"At this point, DrakX will allow you to choose the security level you desire\n"
"for your machine. As a rule of thumb, the security level should be set\n"
"higher if the machine is to contain crucial data, or if it's to be directly\n"
"exposed to the Internet. The trade-off that a higher security level is\n"
"generally obtained at the expense of ease of use.\n"
"\n"
"If you do not know what to choose, keep the default option. You'll be able\n"
"to change it later with the draksec tool, which is part of Mandriva Linux\n"
"Control Center.\n"
"\n"
"Fill the \"%s\" field with the e-mail address of the person responsible for\n"
"security. Security messages will be sent to that address."
msgstr ""
"在这里, DrakX 将允许您选择计算机要使用的安全级别。说的直白一点, 如果计算机将"
"包含关键数据, 或者将直接暴露于 Internet\n"
"之下, 则应该设置较高的安全级别。较高的安全级别通常以损失易用性作为代价。\n"
"\n"
"如果您不知道要选择什么, 请保持默认选项。您可以稍后从 Mandriva Linux 控制中心"
"的一部分 draksec\n"
"来更改安全级别。\n"
"\n"
"请在\"%s\"域中填入要负责安全的人的电子邮件地址。安全信息将被发送到该地址。"
#: help.pm:458
#, c-format
msgid "Security Administrator"
msgstr "安全管理员"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:461
#, c-format
msgid ""
"At this point, you need to choose which partition(s) will be used for the\n"
"installation of your Mandriva Linux system. If partitions have already been\n"
"defined, either from a previous installation of GNU/Linux or by another\n"
"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
"partitions must be defined.\n"
"\n"
"To create partitions, you must first select a hard drive. You can select\n"
"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
"\n"
"To partition the selected hard drive, you can use these options:\n"
"\n"
" * \"%s\": this option deletes all partitions on the selected hard drive\n"
"\n"
" * \"%s\": this option enables you to automatically create ext3 and swap\n"
"partitions in the free space of your hard drive\n"
"\n"
"\"%s\": gives access to additional features:\n"
"\n"
" * \"%s\": saves the partition table to a floppy. Useful for later\n"
"partition-table recovery if necessary. It is strongly recommended that you\n"
"perform this step.\n"
"\n"
" * \"%s\": allows you to restore a previously saved partition table from a\n"
"floppy disk.\n"
"\n"
" * \"%s\": if your partition table is damaged, you can try to recover it\n"
"using this option. Please be careful and remember that it does not always\n"
"work.\n"
"\n"
" * \"%s\": discards all changes and reloads the partition table that was\n"
"originally on the hard drive.\n"
"\n"
" * \"%s\": un-checking this option will force users to manually mount and\n"
"unmount removable media such as floppies and CD-ROMs.\n"
"\n"
" * \"%s\": use this option if you wish to use a wizard to partition your\n"
"hard drive. This is recommended if you do not have a good understanding of\n"
"partitioning.\n"
"\n"
" * \"%s\": use this option to cancel your changes.\n"
"\n"
" * \"%s\": allows additional actions on partitions (type, options, format)\n"
"and gives more information about the hard drive.\n"
"\n"
" * \"%s\": when you are finished partitioning your hard drive, this will\n"
"save your changes back to disk.\n"
"\n"
"When defining the size of a partition, you can finely set the partition\n"
"size by using the Arrow keys of your keyboard.\n"
"\n"
"Note: you can reach any option using the keyboard. Navigate through the\n"
"partitions using [Tab] and the [Up/Down] arrows.\n"
"\n"
"When a partition is selected, you can use:\n"
"\n"
" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
"\n"
" * Ctrl-d to delete a partition\n"
"\n"
" * Ctrl-m to set the mount point\n"
"\n"
"To get information about the different file system types available, please\n"
"read the ext2FS chapter from the ``Reference Manual''.\n"
"\n"
"If you are installing on a PPC machine, you will want to create a small HFS\n"
"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
"may find it a useful place to store a spare kernel and ramdisk images for\n"
"emergency boot situations."
msgstr ""
"在这一步中, 您需要选择要使用哪个或哪些分区来安装您的 Mandriva Linux 系统。如"
"果已经定义了分区, 不管是先前安装的 GNU/Linux\n"
"还是由其它分区工具划分的, 您都可以使用已有的分区。否则, 必须对硬盘分区进行定"
"义。\n"
"\n"
"要创建分区, 您必须先选择硬盘。您可以单击“hda”选择第一个 IDE 硬盘进行分区, "
"“hdb”选择第二个 IDE 硬盘, “sda”\n"
"选择第一个 SCSI 驱动器, 依此类推。\n"
"\n"
"为了对选中硬盘进行分区, 您需要使用这些选项: \n"
"\n"
" * \"%s\": 此选项将删除选中硬盘上的全部分区\n"
"\n"
" * \"%s\": 此选项可在您硬盘的剩余空间中为您自动创建 ext3 和交换分区\n"
"\n"
"\"%s\": 使您可以访问额外特性: \n"
"\n"
" * \"%s\": 将分区表保存到软盘。如果需要的话, 稍后可进行分区表修复。强烈推荐您"
"执行这一步骤。\n"
"\n"
" * \"%s\": 允许您恢复先前保存在软盘上的分区表。\n"
"\n"
" * \"%s\": 如果您的分区表已损坏, 您可以使用此选项尝试修复。请额外小心, 并记住"
"这一选项并不总是能够帮助您。\n"
"\n"
" * \"%s\": 忽略全部更改并重新装入硬盘上的原始分区表。\n"
"\n"
" * \"%s\": 取消此选项将强迫用户手动挂载类似软盘和 CD-ROM 的可移动介质。\n"
"\n"
" * \"%s\": 如果您想要使用向导对您的营盘进行分区, 则使用此选项。如果您对分区理"
"解不深的话, 推荐您使用此选项。\n"
"\n"
" * \"%s\": 使用此选项取消您的更改。\n"
"\n"
" * \"%s\": 允许对分区进行额外的操作(类型、选项、格式化), 并给出关于硬盘的额外"
"信息。\n"
"\n"
" * \"%s\": 当您完成对硬盘的分区后, 此选项将把您的更改回存到硬盘。\n"
"\n"
"定义分区大小时, 您可以使用键盘上的光标键对分区大小进行调整。\n"
"\n"
"注意: 您可以使用键盘访问任何选项。可以使用 [Tab] 和 [上/下]光标键来切换分"
"区。\n"
"\n"
"选中分区后, 您可以用: \n"
"\n"
" * Ctrl+C 创建新分区(如果选中了空分区)\n"
"\n"
" * Ctrl+D 删除分区\n"
"\n"
" * Ctrl+M 设定挂载点\n"
"\n"
"要的关于不同的文件系统类型的更多信息, 请查看“参考手册”中 ext2FS 一章。\n"
"\n"
"如果您在 PPC 计算机上安装, 您可能需要创建至少 1MB 大小的 HFS“bootstrap”分区, "
"该分区将用于 yaboot\n"
"引导程序。如果您创建的分区再稍微大点, 比如说 50MB, 您可能会发现这个分区可用来"
"存储内核或紧急引导时的虚拟磁盘映像。"
#: help.pm:530
#, c-format
msgid "Removable media auto-mounting"
msgstr "自动挂载可移动介质"
#: help.pm:530
#, c-format
msgid "Toggle between normal/expert mode"
msgstr "在正常/专家模式间切换"
#: help.pm:533
#, c-format
msgid ""
"More than one Microsoft partition has been detected on your hard drive.\n"
"Please choose the one which you want to resize in order to install your new\n"
"Mandriva Linux operating system.\n"
"\n"
"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
"\"Capacity\".\n"
"\n"
"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
"\"partition number\" (for example, \"hda1\").\n"
"\n"
"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
"\"sd\" if it is a SCSI hard drive.\n"
"\n"
"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
"hard drives:\n"
"\n"
" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
"\n"
" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
"\n"
" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
"\n"
" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
"\"second lowest SCSI ID\", etc.\n"
"\n"
"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
"disk or partition is called \"C:\")."
msgstr ""
"在硬盘上检测到了多个 Microsoft 分区。请选择一个分区改变大小, 以便安装您新\n"
"的 Mandriva Linux 操作系统。\n"
"\n"
"每个分区都是按“Linux 名称”、“Windows 名称”、“容量”顺序列出的。\n"
"\n"
"“Linux 名称”的结构为:“硬盘类型”、“硬盘编号”、“分区编号”(例如, \n"
"“hda1”)。\n"
"\n"
"如果您的硬盘是 IDE 硬盘, “硬盘类型”为“hd”;如果为 SCSI 硬盘则为“sd”。\n"
"\n"
"“硬盘编号”总是跟在“hd”或“sd”后面的字母。对于 IDE 硬盘来说:\n"
"\n"
" *“a”意味着“主 IDE 控制器的主硬盘”;\n"
"\n"
" *“b”意味着“主 IDE 控制器的从硬盘”;\n"
"\n"
" *“c”意味着“从 IDE 控制器的主硬盘”;\n"
"\n"
" *“d”意味着“从 IDE 控制器的从硬盘”。\n"
"\n"
"对于 SCSI 硬盘, “a”意味着“最低的 SCSI ID”, “b”意味着“第二低的 SCSI ID”, 等"
"等。\n"
"\n"
"“Windows 名称”就是硬盘在 Windows 下的盘符(第一个此盘或分区就是“C:”)。"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:564
#, c-format
msgid ""
"\"%s\": check the current country selection. If you're not in this country,\n"
"click on the \"%s\" button and choose another. If your country is not in "
"the\n"
"list shown, click on the \"%s\" button to get the complete country list."
msgstr ""
"\"%s\":检查当前的国家选择。如果您并非在这个国家, 请单击\"%s\"按钮, 并选择另"
"外的选项。如果您的国家在第一个列表中并没有显示出来, 单击\"%s\"按钮可获得完整"
"的国家列表。"
# DO NOT BOTHER TO MODIFY HERE, SEE:
#: help.pm:569
#, c-format
msgid ""
"This step is activated only if an existing GNU/Linux partition has been\n"
"found on your machine.\n"
"\n"
"DrakX now needs to know if you want to perform a new installation or an\n"
"upgrade of an existing Mandriva Linux system:\n"
"\n"
" * \"%s\". For the most part, this completely wipes out the old system.\n"
"However, depending on your partitioning scheme, you can prevent some of\n"
"your existing data (notably \"home\" directories) from being over-written.\n"
"If you wish to change how your hard drives are partitioned, or to change\n"
"the file system, you should use this option.\n"
"\n"
" * \"%s\". This installation class allows you to update the packages\n"
"currently installed on your Mandriva Linux system. Your current "
"partitioning\n"
|