Initial removal of support for non-systemd systems.

11 files changed, 0 insertions, 191 deletions

diff --git a/init/control-alt-delete.conf b/init/control-alt-delete.conf
deleted file mode 100644
index 35cb1305..00000000
--- a/init/control-alt-delete.conf
+++ /dev/null
@@ -1,8 +0,0 @@
-# control-alt-delete - emergency keypress handling
-#
-# This task is run whenever the Control-Alt-Delete key combination is
-# pressed.  Usually used to shut down the machine.
-
-start on control-alt-delete
-
-exec /sbin/shutdown -r now "Control-Alt-Delete pressed"
diff --git a/init/plymouth-shutdown.conf b/init/plymouth-shutdown.conf
deleted file mode 100644
index 49010848..00000000
--- a/init/plymouth-shutdown.conf
+++ /dev/null
@@ -1,16 +0,0 @@
-# plymouth-shutdown - put up shutdown splash
-#
-# This service triggers plymouth to put up a splash
-# when leaving runlevel 5.
-
-start on (splash-request IMMEDIATE=1) or (splash-request and stopped prefdm)
-
-task
-console output
-script
-        /sbin/plymouthd --mode="$MODE" || exit 1
-        /bin/plymouth --sysinit
-        /bin/plymouth --show-splash
-        /bin/plymouth message --text="$MESSAGE"
-end script
-
diff --git a/init/prefdm.conf b/init/prefdm.conf
deleted file mode 100644
index 701b8065..00000000
--- a/init/prefdm.conf
+++ /dev/null
@@ -1,12 +0,0 @@
-# prefdm - preferred display manager
-#
-# Starts gdm/xdm/etc by preference
-
-start on stopped rc RUNLEVEL=5
-
-stop on starting rc RUNLEVEL=[!5]
-
-console output
-respawn
-respawn limit 10 120
-exec /etc/X11/prefdm -nodaemon
diff --git a/init/quit-plymouth.conf b/init/quit-plymouth.conf
deleted file mode 100644
index 7a67b071..00000000
--- a/init/quit-plymouth.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-# quit-plymouth - script to stop boot splash
-#
-# This service triggers plymouth to quit when we reach the
-# end of the boot cycle. We start on 'stopping rcX' to make sure
-# this completes before the getty starts.
-# prefdm handles quit differently, though.
-
-start on runlevel S or stopping rc RUNLEVEL=[234]
-
-task
-
-script
-	 /bin/plymouth quit || :
-end script
diff --git a/init/rc.conf b/init/rc.conf
deleted file mode 100644
index e7285e47..00000000
--- a/init/rc.conf
+++ /dev/null
@@ -1,14 +0,0 @@
-# rc - System V runlevel compatibility
-#
-# This task runs the old sysv-rc runlevel scripts.  It
-# is usually started by the telinit compatibility wrapper.
-
-start on runlevel [0123456]
-
-stop on runlevel [!$RUNLEVEL]
-
-task
-
-export RUNLEVEL
-console output
-exec /etc/rc.d/rc $RUNLEVEL
diff --git a/init/rcS-sulogin.conf b/init/rcS-sulogin.conf
deleted file mode 100644
index 818518de..00000000
--- a/init/rcS-sulogin.conf
+++ /dev/null
@@ -1,23 +0,0 @@
-# rcS-sulogin - "single-user" runlevel compatibility
-#
-# This task runs /bin/bash during "single-user" mode,
-# then continues to the default runlevel.
-
-start on runlevel S
-
-stop on runlevel [!S]
-
-console owner
-script
-	. /etc/sysconfig/init
-	plymouth --hide-splash || true
-	[ -z "$SINGLE" ] && SINGLE=/sbin/sushell
-	exec $SINGLE
-end script
-post-stop script
-	if [ "$RUNLEVEL" = "S" ]; then
-		[ -f /etc/inittab ] && runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
-		[ -z "$runlevel" ] && runlevel="3"
-		exec telinit $runlevel
-	fi
-end script
diff --git a/init/rcS.conf b/init/rcS.conf
deleted file mode 100644
index 6f2e7d17..00000000
--- a/init/rcS.conf
+++ /dev/null
@@ -1,28 +0,0 @@
-# rcS - runlevel compatibility
-#
-# This task runs the old sysv-rc startup scripts.
-
-start on startup
-
-stop on runlevel
-
-task
-
-# Note: there can be no previous runlevel here, if we have one it's bad
-# information (we enter rc1 not rcS for maintenance).  Run /etc/rc.d/rc
-# without information so that it defaults to previous=N runlevel=S.
-console output
-exec /etc/rc.d/rc.sysinit
-post-stop script
-	if [ "$UPSTART_EVENTS" = "startup" ]; then
-		[ -f /etc/inittab ] && runlevel=$(/bin/awk -F ':' '$3 == "initdefault" && $1 !~ "^#" { print $2 }' /etc/inittab)
-		[ -z "$runlevel" ] && runlevel="3"
-		for t in $(cat /proc/cmdline); do
-			case $t in
-				-s|single|S|s) runlevel="S" ;;
-				[1-9])       runlevel="$t" ;;
-			esac
-		done
-		exec telinit $runlevel
-	fi
-end script
diff --git a/init/serial.conf b/init/serial.conf
deleted file mode 100644
index dcf7df43..00000000
--- a/init/serial.conf
+++ /dev/null
@@ -1,30 +0,0 @@
-# Automatically start a configured serial console
-#
-# How this works:
-#
-# On boot, a udev helper examines /dev/console. If a serial console is the
-# primary console (last console on the commandline in grub),  the event
-# 'fedora.serial-console-available <port name> <speed>' is emitted, which
-# triggers this script. It waits for the runlevel to finish, ensures
-# the proper port is in /etc/securetty, and starts the getty.
-#
-# If your serial console is not the primary console, or you want a getty
-# on serial even if it's not the console, create your own event e.g. 
-# /etc/init/ttyS0.conf with content:
-# # ttyS0 - agetty
-# #
-# # This service maintains a agetty on ttyS0.
-#
-# stop on runlevel [S016]
-# start on runlevel [23]
-#
-# respawn
-# exec agetty -h -L -w /dev/ttyS0 115200 vt102
-
-start on fedora.serial-console-available DEV=* and stopped rc RUNLEVEL=[2345]
-stop on runlevel [S016]
-
-instance $DEV
-respawn
-pre-start exec /sbin/securetty $DEV
-exec /sbin/agetty /dev/$DEV $SPEED vt100-nav
diff --git a/init/splash-manager.conf b/init/splash-manager.conf
deleted file mode 100644
index eea28ca4..00000000
--- a/init/splash-manager.conf
+++ /dev/null
@@ -1,22 +0,0 @@
-# splash-manager - requests splash screen
-#
-# This service emits a splash-request event when
-# its time to put up the plymouth splash
-
-start on starting rc RUNLEVEL=[06]
-task
-
-console output
-script
-        if [ "$RUNLEVEL" = "0" ]; then
-                MESSAGE=$"Shutting down..."
-        elif [ "$RUNLEVEL" = "6" ]; then
-                MESSAGE=$"Restarting..."
-        fi
-	if initctl status prefdm 2>/dev/null | grep -q stop/waiting; then
-                initctl emit splash-request IMMEDIATE=1 MODE=shutdown MESSAGE="$MESSAGE"
-        else
-                initctl emit splash-request MODE=shutdown MESSAGE="$MESSAGE"
-        fi
-end script
-
diff --git a/init/start-ttys.conf b/init/start-ttys.conf
deleted file mode 100644
index 1528cf4b..00000000
--- a/init/start-ttys.conf
+++ /dev/null
@@ -1,15 +0,0 @@
-#
-# This service starts the configured number of gettys.
-
-start on stopped rc RUNLEVEL=[2345]
-
-env ACTIVE_CONSOLES=/dev/tty[1-6]
-env X_TTY=/dev/tty1
-task
-script
-	. /etc/sysconfig/init
-	for tty in $(echo $ACTIVE_CONSOLES) ; do
-		[ "$RUNLEVEL" = "5" -a "$tty" = "$X_TTY" ] && continue
-		initctl start tty TTY=$tty
-	done
-end script
diff --git a/init/tty.conf b/init/tty.conf
deleted file mode 100644
index fca6388e..00000000
--- a/init/tty.conf
+++ /dev/null
@@ -1,9 +0,0 @@
-# tty - getty
-#
-# This service maintains a getty on the specified device.
-
-stop on runlevel [S016]
-
-respawn
-instance $TTY
-exec /sbin/mingetty $TTY