path: root/perl-install/network/netconnect.pm

package network::netconnect; # $Id$

use strict;
use common;
use log;
use detect_devices;
use run_program;
use modules;
use any;
use mouse;
use network;
use network::tools;
use MDK::Common::Globals "network", qw($in $prefix $connect_file $disconnect_file $connect_prog);

my %conf;

sub detect {
    my ($auto_detect, $_net_install) = @_;
    my $isdn = {};
    require network::isdn;
    network::isdn->import;
    isdn_detect_backend($isdn);
    $auto_detect->{isdn}{$_} = $isdn->{$_} foreach qw(description vendor id driver card_type type);
    $auto_detect->{isdn}{description} =~ s/.*\|//;

    modules::load_category('network/main|gigabit|usb');
    require network::ethernet;
    network::ethernet->import;
    my @all_cards = conf_network_card_backend();
    foreach (@all_cards) {
        $auto_detect->{lan}{$_->[0]} = $_->[1];
    }

    my $adsl = {};
    require network::adsl;
    network::adsl->import;
    $auto_detect->{adsl} = adsl_detect($adsl);

    require network::modem;
    network::modem->import;
    my ($modem, @pci_modems) = detect_devices::getModem();
    $modem->{device} and $auto_detect->{modem} = $modem->{device};
    @pci_modems and $auto_detect->{winmodem}{$_->{driver}} = $_->{description} foreach @pci_modems;
}

sub init_globals {
    my ($in, $prefix) = @_;
    MDK::Common::Globals::init(
			       in => $in,
			       prefix => $prefix,
			       connect_file => "/etc/sysconfig/network-scripts/net_cnx_up",
			       disconnect_file => "/etc/sysconfig/network-scripts/net_cnx_down",
			       connect_prog => "/etc/sysconfig/network-scripts/net_cnx_pg");
}

sub main {
    my ($prefix, $netcnx, $in, $o_netc, $o_mouse, $o_intf, $o_first_time, $o_noauto) = @_;
    my $netc  = $o_netc  || {};
    my $mouse = $o_mouse || {};
    my $intf  = $o_intf  || {};
    my $first_time = $o_first_time || 0;

    init_globals($in, $prefix);
    $netc->{minus_one} = 0; #When one configure an eth in dhcp without gateway
    $::isStandalone and read_net_conf($prefix, $netcnx, $netc);
    $netc->{NET_DEVICE} = $netcnx->{NET_DEVICE} if $netcnx->{NET_DEVICE}; # REDONDANCE with read_conf. FIXME
    $netc->{NET_INTERFACE} = $netcnx->{NET_INTERFACE} if $netcnx->{NET_INTERFACE}; # REDONDANCE with read_conf. FIXME
    network::network::read_all_conf($prefix, $netc, $intf);

    modules::mergein_conf("$prefix/etc/modules.conf");

    my $direct_net_install;
    if ($first_time && $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs")) {
	!$::expert && !$o_noauto || $in->ask_okcancel(N("Network Configuration"),
						    N("Because you are doing a network installation, your network is already configured.
Click on Ok to keep your configuration, or cancel to reconfigure your Internet & Network connection.
"), 1) and do {
    $netcnx->{type} = 'lan';
    output_with_perm("$prefix$connect_file", 0755,
      qq(
ifup eth0
));
    output("$prefix$disconnect_file", 0755,
      qq(
ifdown eth0
));
    $direct_net_install = 1;
    goto step_5;
};
    }

    $netc->{autodetection} = 1;
    $netc->{autodetect} = {};

  step_1:
    $::Wizard_no_previous = 1;
    my @profiles = get_profiles();
    eval { $in->ask_from_({ title => N("Network Configuration Wizard"),
			    messages => N("Welcome to The Network Configuration Wizard.

We are about to configure your internet/network connection.
If you don't want to use the auto detection, deselect the checkbox.
"),
			    interactive_help_id => 'configureNetwork',
			    },
			 [
			  if_(@profiles > 1, { label => N("Choose the profile to configure"), val => \$netcnx->{PROFILE}, list => \@profiles }),
			  { text => N("Use auto detection"), val => \$netc->{autodetection}, type => 'bool' },
			  { text => N("Expert Mode"), val => \$::expert, type => 'bool' },
			 ]
			) or goto step_5 }; $in->exit(0) if $@ =~ /wizcancel/;
    undef $::Wizard_no_previous;
    set_profile($netcnx);
    if ($netc->{autodetection}) {
	my $_w = $in->wait_message(N("Network Configuration Wizard"), N("Detecting devices..."));
	detect($netc->{autodetect}, $::isInstall && ($in->{method} eq "ftp" || $in->{method} eq "http" || $in->{method} eq "nfs"));
    }

    my %net_conf_callbacks = (adsl => sub { require network::adsl; network::adsl::configure($netcnx, $netc, $intf, $first_time) },
                              cable => sub { require network::ethernet; network::ethernet::configure_cable($netcnx, $netc, $intf, $first_time) },
                              isdn => sub { require network::isdn; network::isdn::configure($netcnx, $netc, undef) },
                              lan => sub { require network::ethernet; network::ethernet::configure_lan($netcnx, $netc, $intf, $first_time) },
                              modem => sub { require network::modem; network::modem::configure($in, $netcnx, $mouse, $netc) },
                              winmodem => sub { require network::modem; network::modem::winmodemConfigure($in, $netcnx, $mouse, $netc) }, 
                             );


    $conf{$_} = $netc->{autodetect}{$_} ? 1 : 0 foreach 'modem', 'winmodem', 'adsl', 'cable', 'lan';
    $conf{isdn} = $netc->{autodetect}{isdn}{driver} ? 1 : 0;
  step_2:

    my @l = (
	  [ join('', N("Normal modem connection"), if_($netc->{autodetect}{modem}, " - " . N("detected on port %s", $netc->{autodetect}{modem}))), \$conf{modem} ],
	  [ join('', N("Winmodem connection"), if_($netc->{autodetect}{winmodem}, " - " . N("detected"))), \$conf{winmodem} ],
	  [ join('', N("ISDN connection"), if_($netc->{autodetect}{isdn}{description}, " - " . N("detected %s", $netc->{autodetect}{isdn}{description}))), \$conf{isdn} ],
	  [ join('', N("ADSL connection"), if_($netc->{autodetect}{adsl}, " - " . N("detected"))), \$conf{adsl} ],
	  [ join('', N("Cable connection"), if_($netc->{autodetect}{cable}, " - " . N("cable connection detected"))), \$conf{cable} ],
	  [ join('', N("LAN connection"), if_($netc->{autodetect}{lan}, " - " . N("ethernet card(s) detected"))), \$conf{lan} ]
	 );
    eval { $in->ask_from_({ title => N("Network Configuration Wizard"),
			    messages => N("Choose the connection you want to configure"),
			    interactive_help_id => 'configureNetwork',
			  },
			 [ map { { text => $_->[0], val => $_->[1], type => 'bool' } } @l ],
			 changed => sub {
			     return if !$netc->{autodetection};
			     my $c = 0;
			     #-      $conf{adsl} and $c++;
			     $conf{cable} and $c++;
			     my $a = keys(%{$netc->{autodetect}{lan}});
			     0 < $a && $a <= $c and $conf{lan} = undef;
			 }
			) or goto step_1;
	   load_conf($netcnx, $netc, $intf);
        foreach my $type (qw(modem winmodem isdn adsl cable lan)) {
            $conf{$type} and do {
                #-PO here, "forward" is the standard gtk+ button for "next"; check what is displayed in your language
                $in->ask_okcancel(N("Network Configuration Wizard"), N("We are now going to configure the %s connection.\n\n\nPress \"%s\" to continue.", translate($type), N("Next")), 1) or goto step_2;
                &{$net_conf_callbacks{$type}} or goto step_2;
                $netconnect::need_restart_network = 1 if $type =~ /lan|cable/;
            }
        }
       };
    $in->exit(0) if $@ =~ /wizcancel/;
  
  step_2_1:
    my $nb = keys %{$netc->{internet_cnx}};

    if ($nb > 1) {
     # BUG: remember to remove reference to profiles in mcc if we do not restore this feature
	eval { $in->ask_from(N("Network Configuration Wizard"),
			     N("You have configured multiple ways to connect to the Internet.\nChoose the one you want to use.\n\n") . if_(!$::isStandalone, "You may want to configure some profiles after the installation, in the Mandrake Control Center"),
			     [ { label => N("Internet connection"), val => \$netc->{internet_cnx_choice}, list => [ keys %{$netc->{internet_cnx}} ] } ]
			    ) or goto step_2 }; $in->exit(0) if $@ =~ /wizcancel/;
    } elsif ($nb == 1) {
	$netc->{internet_cnx_choice} = (keys %{$netc->{internet_cnx}})[0];
    }
    
    eval { $in->ask_yesorno(N("Network configuration"), N("Configuration is complete, do you want to apply settings ?"), 1) or goto step_2_2 };
    $in->exit(0) if $@ =~ /wizcancel/;
    
    member($netc->{internet_cnx_choice}, ('adsl', 'isdn')) and $netc->{at_boot} = $in->ask_yesorno(N("Network Configuration Wizard"), N("Do you want to start the connection at boot?"));

    if ($netc->{internet_cnx_choice}) {
	write_cnx_script($netc);
	$netcnx->{type} = $netc->{internet_cnx}{$netc->{internet_cnx_choice}}{type};
    } else {
	unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_up";
	unlink "$prefix/etc/sysconfig/network-scripts/net_cnx_down";
	undef $netc->{NET_DEVICE};
    }

    my $success = 1;
    network::configureNetwork2($in, $prefix, $netc, $intf);
    my $network_configured = 1;
    
  step_2_2:
    eval { if ($netconnect::need_restart_network && $::isStandalone && (!$::expert || $in->ask_yesorno(N("Network configuration"),
												       N("The network needs to be restarted. Do you want to restart it ?"), 1))) {
	if (!run_program::rooted($prefix, "/etc/rc.d/init.d/network restart")) {
	    $success = 0;
	    $in->ask_okcancel(N("Network Configuration"), 
			      N("A problem occured while restarting the network: \n\n%s", `/etc/rc.d/init.d/network restart`), 0);
	}
    }
       }; $in->exit(0) if $@ =~ /wizcancel/;

    write_initscript();
    $::isStandalone && member($netc->{internet_cnx_choice}, ('modem', 'adsl', 'isdn')) and
      $success = ask_connect_now($netc->{internet_cnx_choice});

  step_3:
    my $m = $success ? join('', N("Congratulations, the network and Internet configuration is finished.

"), if_($::isStandalone && $in->isa('interactive::gtk'),
N("After this is done, we recommend that you restart your X environment to avoid any hostname-related problems."))) : 
      N("Problems occured during configuration.
Test your connection via net_monitor or mcc. If your connection doesn't work, you might want to relaunch the configuration.");
    $::Wizard_no_previous = 1;
    $::Wizard_finished = 1;
    eval { $in->ask_okcancel(N("Network Configuration"), $m, 1) }; $in->exit(0) if $@ =~ /wizcancel/;
    undef $::Wizard_no_previous;
    undef $::Wizard_finished;
    
  step_5:
    $network_configured or network::configureNetwork2($in, $prefix, $netc, $intf);

    my $connect_cmd;
    if ($netcnx->{type} =~ /modem/ || $netcnx->{type} =~ /isdn_external/) {
	$connect_cmd = qq(
#!/bin/bash
if [ -n "\$DISPLAY" ]; then
if [ -e /usr/bin/kppp ]; then
/sbin/route del default
/usr/bin/kppp &
else
/usr/sbin/net_monitor --connect
fi
else
$connect_file
fi
);
    } elsif ($netcnx->{type}) {
	$connect_cmd = qq(
#!/bin/bash
if [ -n "\$DISPLAY" ]; then
/usr/sbin/net_monitor --connect
else
$connect_file
fi
);
    } else {
	$connect_cmd = qq(
#!/bin/bash
/usr/sbin/drakconnect
);
    }
    if ($direct_net_install) {
	$connect_cmd = qq(
#!/bin/bash
if [ -n "\$DISPLAY" ]; then
/usr/sbin/net_monitor --connect
else
$connect_file
fi
);
    }
    output_with_perm("$prefix$connect_prog", 0755, $connect_cmd) if $connect_cmd;
    $netcnx->{$_} = $netc->{$_} foreach qw(NET_DEVICE NET_INTERFACE);
    $netcnx->{type} =~ /adsl/ or system("/sbin/chkconfig --del adsl 2> /dev/null");

    if ($::isInstall && $::o->{security} >= 3) {
	require network::drakfirewall;
	network::drakfirewall::main($in, $::o->{security} <= 3);
    }
}

sub set_profile {
    my ($netcnx) = @_;
    system("/sbin/set-netprofile \"$netcnx->{PROFILE}\"");
    log::explanations("Switching to \"$netcnx->{PROFILE}\" profile");
}

sub save_profile {
    my ($netcnx) = @_;
    system("/sbin/save-netprofile \"$netcnx->{PROFILE}\"");
    log::explanations("Saving \"$netcnx->{PROFILE}\" profile");
}

sub del_profile {
    my ($profile) = @_;
    return if !$profile || $profile eq "default";
    rm_rf("$::prefix/etc/netprofile/profiles/$profile");
    log::explanations("Deleting \"$profile\" profile ");
}

sub add_profile {
    my ($netcnx, $profile) = @_;
    return if !$profile || $profile eq "default" || member($profile, get_profiles());
    system("/sbin/clone-netprofile \"$netcnx->{PROFILE}\" \"$profile\"");
    log::explanations("Creating \"$profile\" profile");
}

sub get_profiles() {
    map { if_(m!([^/]*)/$!, $1) } glob("$::prefix/etc/netprofile/profiles/*/");
}

sub load_conf {
    my ($netcnx, $netc, $intf) = @_;
    my $current = { getVarsFromSh("$prefix/etc/netprofile/current") };
    
    $netcnx->{PROFILE} = $current->{PROFILE} || 'default';
    network::read_all_conf($prefix, $netc, $intf);
}

sub get_net_device() {
    my $connect_file = "/etc/sysconfig/network-scripts/net_cnx_up";
    my $network_file = "/etc/sysconfig/network";
		if (cat_("$prefix$connect_file") =~ /ifup/) {
  		if_(cat_($connect_file) =~ /^\s*ifup\s+(.*)/m, split(' ', $1))
		} elsif (cat_("$prefix$connect_file") =~ /network/) {
			${{ getVarsFromSh("$prefix$network_file") }}{GATEWAYDEV};
    } elsif (cat_("$prefix$connect_file") =~ /isdn/) {
			"ippp+"; 
    } else {
			"ppp+";
    };
}

sub read_net_conf {
    my ($_prefix, $netcnx, $netc) = @_;
    $netc->{$_} = $netcnx->{$_} foreach 'NET_DEVICE', 'NET_INTERFACE';
    $netcnx->{$netcnx->{type}} ||= {};
}

sub start_internet {
    my ($o) = @_;
    init_globals($o, $o->{prefix});
    modules::load_category('network/main|gigabit|usb'); #- give a chance for module to be loaded using kernel-BOOT modules...
    run_program::rooted($prefix, $connect_file);
}

sub stop_internet {
    my ($o) = @_;
    init_globals($o, $o->{prefix});
    run_program::rooted($prefix, $disconnect_file);
}

my @connection_types = (N_("modem"), N_(" isdn"), N_(" adsl"), N_(" cable"), N_(" local network"));

#---------------------------------------------
#                WONDERFULL pad
#---------------------------------------------
1;

=head1 network::netconnect::detect()

=head2 example of usage

use lib qw(/usr/lib/libDrakX);
use network::netconnect;
use Data::Dumper;

use class_discard;

local $in = class_discard->new;

network::netconnect::init_globals($in);
my %i;
&network::netconnect::detect(\%i);
print Dumper(\%i),"\n";

=cut