summaryrefslogtreecommitdiffstats
path: root/tools/serial_probe
diff options
context:
space:
mode:
Diffstat (limited to 'tools/serial_probe')
-rw-r--r--tools/serial_probe/.cvsignore1
-rw-r--r--tools/serial_probe/Makefile9
-rw-r--r--tools/serial_probe/device.h80
-rw-r--r--tools/serial_probe/serial.c1201
-rw-r--r--tools/serial_probe/serial.h43
-rw-r--r--tools/serial_probe/serial_probe.c92
6 files changed, 0 insertions, 1426 deletions
diff --git a/tools/serial_probe/.cvsignore b/tools/serial_probe/.cvsignore
deleted file mode 100644
index e8e3e2d94..000000000
--- a/tools/serial_probe/.cvsignore
+++ /dev/null
@@ -1 +0,0 @@
-serial_probe
diff --git a/tools/serial_probe/Makefile b/tools/serial_probe/Makefile
deleted file mode 100644
index 8e8590d62..000000000
--- a/tools/serial_probe/Makefile
+++ /dev/null
@@ -1,9 +0,0 @@
-CFLAGS = -Wall -Os
-CFILES = $(wildcard *.c)
-OFILES = $(CFILES:%.c=%.o)
-GOAL = serial_probe
-
-$(GOAL): $(OFILES)
-
-clean:
- rm -f $(GOAL) $(OFILES) *~
diff --git a/tools/serial_probe/device.h b/tools/serial_probe/device.h
deleted file mode 100644
index fa5f8183e..000000000
--- a/tools/serial_probe/device.h
+++ /dev/null
@@ -1,80 +0,0 @@
-
-/* Copyright 1999 Red Hat, Inc.
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-#ifndef _KUDZU_DEVICES_H_
-#define _KUDZU_DEVICES_H_
-
-#include <stdio.h>
-
-enum deviceClass {
- /* device classes... this is somewhat ad-hoc */
- CLASS_UNSPEC, CLASS_OTHER, CLASS_NETWORK, CLASS_SCSI, CLASS_VIDEO,
- CLASS_AUDIO, CLASS_MOUSE, CLASS_MODEM, CLASS_CDROM, CLASS_TAPE,
- CLASS_FLOPPY, CLASS_SCANNER, CLASS_HD, CLASS_RAID, CLASS_PRINTER,
- CLASS_CAPTURE, CLASS_KEYBOARD, CLASS_PCMCIA
-};
-
-enum deviceBus {
- /* 'bus' that a device is attached to... this is also ad-hoc */
- /* BUS_SBUS is sort of a misnomer - it's more or less Sun */
- /* OpenPROM probing of all various associated non-PCI buses */
- BUS_UNSPEC = 0,
- BUS_OTHER = (1 << 0),
- BUS_PCI = (1 << 1),
- BUS_SBUS = (1 << 2),
- BUS_PSAUX = (1 << 3),
- BUS_SERIAL = (1 << 4),
- BUS_PARALLEL = (1 << 5),
- BUS_SCSI = (1 << 6),
- BUS_IDE = (1 << 7),
- /* Again, misnomer */
- BUS_KEYBOARD = (1 << 8),
-#ifdef _i_wanna_build_this_crap_
- BUS_ISAPNP = (1 << 9),
-#endif
-};
-
-struct device {
- /* This pointer is used to make lists by the library. */
- /* Do not expect it to remain constant (or useful) across library calls. */
- struct device *next;
- /* Used for ordering, and for aliasing (modem0, modem1, etc.) */
- int index;
- enum deviceClass class; /* type */
- enum deviceBus bus; /* bus it's attached to */
- char * device; /* device file associated with it */
- char * driver; /* driver to load, if any */
- char * desc; /* a description */
- int detached; /* should we care if it disappears? */
- struct device *(*newDevice) (struct device *old, struct device *new);
- void (*freeDevice) (struct device *dev);
- void (*writeDevice) (FILE *file, struct device *dev);
- int (*compareDevice) (struct device *dev1, struct device *dev2);
-};
-
-struct device *newDevice(struct device *old, struct device *new);
-void freeDevice(struct device *dev);
-void writeDevice(FILE *file, struct device *dev);
-int compareDevice(struct device *dev1, struct device *dev2);
-struct device *readDevice(FILE *file);
-
-/* Most of these aren't implemented yet...... */
-/* Return everything found, even non-useful stuff */
-#define PROBE_ALL 1
-/* Don't do 'dangerous' probes that could do weird things (isapnp, serial) */
-#define PROBE_SAFE (1<<1)
-/* Stop at first device found */
-#define PROBE_ONE (1<<2)
-
-
-#endif
diff --git a/tools/serial_probe/serial.c b/tools/serial_probe/serial.c
deleted file mode 100644
index ef575d6c3..000000000
--- a/tools/serial_probe/serial.c
+++ /dev/null
@@ -1,1201 +0,0 @@
-/* probe serial port for PnP/Legacy devices
- *
- * Copyright 1999 Red Hat, Inc.
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-
-#include <stdio.h>
-#include <stdlib.h>
-#include <fcntl.h>
-#include <unistd.h>
-#include <termios.h>
-#include <errno.h>
-#include <string.h>
-#include <signal.h>
-#include <time.h>
-#include <libgen.h>
-#include <sys/time.h>
-#include <sys/types.h>
-#include <sys/stat.h>
-#include <sys/ioctl.h>
-
-#include <linux/serial.h>
-#include "serial.h"
-
-/* character strings ARE null-terminated in the following structure */
-/* these elements are marked with a (string) in the comment */
-/* If PnP device sent 6 bit data stream, we've xlated by a 0x20 offset */
-/* When computing checksum, must remove this offset */
-struct pnp_com_id {
- unsigned char xlate_6bit; /* does this contain xlated data */
- unsigned char other_id[17]; /* backward compatibility with pre-PNP */
- unsigned char other_len; /* length of the other_id */
- unsigned char pnp_rev[2]; /* PnP revision bytes */
- unsigned char pnp_rev_str[8]; /* PnP revision (string version) */
- unsigned char eisa_id[4]; /* EISA Mfr identifier (string) */
- unsigned char product_id[5]; /* Mfr determined product ID (string) */
- unsigned char serial_number[9];/* Optional dev serial number (string) */
- unsigned char class_name[33]; /* Optional PnP Class name (string) */
- unsigned char driver_id[42]; /* Optional compat device IDs (string) */
- unsigned char user_name[42]; /* Optional verbose product descr (string)*/
- unsigned char checksum[2]; /* Optional checksum */
-};
-
-/* there are two possible bytes to signify the start of a PnP ID string */
-#define BeginPnP1 0x28
-#define BeginPnP2 0x08
-
-/* Likewise, two possible stop bytes */
-#define EndPnP1 0x29
-#define EndPnP2 0x09
-
-/* these chars indicate extensions to the base dev id exist */
-#define ExtendPnP1 0x5c
-#define ExtendPnP2 0x3c
-
-#define PNP_COM_MAXLEN 256
-
-/* results from initiating hardware probe of a hardware device */
-#define PNP_COM_FATAL 1 /* system error, check errno */
-#define PNP_COM_FAIL 2 /* probe ok, but found nothing */
-#define PNP_COM_OK 3 /* probe ok, we found it */
-
-/* types of devices we might find */
-/* if PNP_COM_PNPDEV is NOT set, its a legacy device */
-#define PNP_COM_MOUSE 1 /* its a mouse */
-#define PNP_COM_MODEM 2 /* its a modem */
-#define PNP_COM_OTHER 4 /* device is there, cant tell what kind */
-#define PNP_COM_NOEXIST 8 /* no device seen */
-#define PNP_COM_PNPDEV 512 /* its a PNP device */
-
-/* level of debugging output */
-/* current any value > 0 dumps all available debugging output */
-static int debug_level=0;
-
-static void serialFreeDevice(struct serialDevice *dev) {
- if (dev->pnpmfr) free(dev->pnpmfr);
- if (dev->pnpmodel) free(dev->pnpmodel);
- if (dev->pnpcompat) free(dev->pnpcompat);
- if (dev->pnpdesc) free(dev->pnpdesc);
- freeDevice((struct device *)dev);
-}
-
-static void serialWriteDevice(FILE *file, struct serialDevice *dev)
-{
- writeDevice(file, (struct device *) dev);
- if (dev->pnpmfr)
- fprintf(file,"pnpmfr: %s\n",dev->pnpmfr);
- if (dev->pnpmodel)
- fprintf(file,"pnpmodel: %s\n",dev->pnpmodel);
- if (dev->pnpcompat)
- fprintf(file,"pnpcompat: %s\n",dev->pnpcompat);
- if (dev->pnpdesc)
- fprintf(file,"pnpdesc: %s\n",dev->pnpdesc);
-}
-
-static int serialCompareDevice( struct serialDevice *dev1, struct serialDevice *dev2)
-{
- int x;
-
- x = compareDevice((struct device *)dev1, (struct device *)dev2);
- if (x && x!=2) return x;
- if (dev1->pnpmfr && dev2->pnpmfr && strcmp(dev1->pnpmfr,dev2->pnpmfr))
- return 1;
- if ((!dev1->pnpmfr || !dev2->pnpmfr) && (dev1->pnpmfr != dev2->pnpmfr))
- return 1;
- if (dev1->pnpmodel && dev2->pnpmodel && strcmp(dev1->pnpmodel,dev2->pnpmodel))
- return 1;
- if ((!dev1->pnpmodel || !dev2->pnpmodel) && (dev1->pnpmodel != dev2->pnpmodel))
- return 1;
- if (dev1->pnpcompat && dev2->pnpcompat && strcmp(dev1->pnpcompat,dev2->pnpcompat))
- return 1;
- if ((!dev1->pnpcompat || !dev2->pnpcompat) && (dev1->pnpcompat != dev2->pnpcompat))
- return 1;
- if (dev1->pnpdesc && dev2->pnpdesc && strcmp(dev1->pnpdesc,dev2->pnpdesc))
- return 1;
- if ((!dev1->pnpdesc || !dev2->pnpdesc) && (dev1->pnpdesc != dev2->pnpdesc))
- return 1;
- return x;
-}
-
-
-struct serialDevice * serialNewDevice(struct serialDevice *dev) {
- struct serialDevice *ret;
-
- ret = malloc(sizeof(struct serialDevice));
- memset(ret,'\0',sizeof(struct serialDevice));
- ret=(struct serialDevice *)newDevice((struct device *)dev,(struct device *)ret);
- ret->bus = BUS_SERIAL;
- ret->newDevice = serialNewDevice;
- ret->freeDevice = serialFreeDevice;
- ret->writeDevice = serialWriteDevice;
- ret->compareDevice = serialCompareDevice;
- if (dev && dev->bus == BUS_SERIAL) {
- if (dev->pnpmfr)
- ret->pnpmfr=strdup(dev->pnpmfr);
- if (dev->pnpmodel)
- ret->pnpmodel=strdup(dev->pnpmodel);
- if (dev->pnpcompat)
- ret->pnpcompat=strdup(dev->pnpcompat);
- if (dev->pnpdesc)
- ret->pnpdesc=strdup(dev->pnpdesc);
- }
- return ret;
-}
-
-/* UNUSED */
-void print_status_lines( int fd ) {
- int modem_lines;
-
- ioctl(fd, TIOCMGET, &modem_lines);
-
- printf("DTR : %s\n",(modem_lines & TIOCM_DTR ? "On" : "Off"));
- printf("RTS : %s\n",(modem_lines & TIOCM_RTS ? "On" : "Off"));
- printf("CTS : %s\n",(modem_lines & TIOCM_CTS ? "On" : "Off"));
- printf("DSR : %s\n",(modem_lines & TIOCM_DSR ? "On" : "Off"));
- printf("CD : %s\n",(modem_lines & TIOCM_CD ? "On" : "Off"));
- printf("RI : %s\n",(modem_lines & TIOCM_RI ? "On" : "Off"));
-
-}
-
-
-/* UNUSED except in debug */
-/* outputs data in a hex table, 8 values per row */
-void print_hex_data( unsigned char *data, int len ) {
- int i, j, pos;
-
- if (len == 0) {
- printf("No data to print.\n");
- return;
- }
-
- pos = 0;
- for (i=0; i< len; i+=8) {
- printf("0x%.4x ", i);
- for (j=i; j < len && j < i+8; j++) {
- printf("0x%.2x ",data[pos++]);
- }
- printf("\n");
- }
-}
-
-
-/*
- * wait_input - wait until there is data available on fd,
- * for the length of time specified by *timo (indefinite
- * if timo is NULL).
- */
-
-int wait_for_input (int fd, struct timeval *timo) {
- fd_set ready;
- int n;
-
- FD_ZERO(&ready);
- FD_SET(fd, &ready);
-
- n = select(fd+1, &ready, NULL, &ready, timo);
- return n;
-}
-
-/* UNUSED */
-/* read characters into the buffer buf, until one of: */
-/* char_timeout expired before next character arrives */
-/* total_timeout expires */
-/* maxlen characters are retrieved */
-/* */
-/* returns < 0 if it fails */
-/* otherwise the # of characters received is returned */
-/* char_timeout is in microseconds (millionths of a sec) */
-/* total_timeout is in seconds */
-int timed_serial_read(int fd, int char_timeout, int total_timeout,
- unsigned char *buf, int maxlen ) {
-
- int done, pos, starttime, temp;
- struct timeval timo;
- unsigned char intbuf[2];
-
- /* start reading */
- done = 0;
- pos = 0;
- starttime=time(NULL);
- memset(buf, 0, maxlen);
- while (!done) {
- timo.tv_sec=0;
- timo.tv_usec=char_timeout;
- if (wait_for_input(fd, &timo) > 0) {
- temp = read( fd, intbuf, 1 );
- if (temp < 0) {
- if (errno != EAGAIN)
- return -1;
- } else {
- buf[pos++] = intbuf[0];
- buf[pos] = 0;
- }
- } else
- done = 1;
-
- /* shouldnt run more than 5 seconds */
- if (time(NULL)-starttime > total_timeout )
- done = 1;
-
- if (pos > maxlen)
- done = 1;
- }
- return pos;
-}
-
-
-int open_serial_port( char *port ) {
- int fd;
-
- fd = open( port, O_RDWR | O_NONBLOCK);
- if (fd < 0)
- return -1;
-
- /* reset file so it is no longer in non-blocking mode */
- if (fcntl(fd, F_SETFL, 0) < 0) {
- close(fd);
- return -1;
- }
-
- return fd;
-}
-
-/* <0 means ioctl error occurred */
-int get_serial_lines( int fd ) {
- int modem_lines;
-
- ioctl(fd, TIOCMGET, &modem_lines);
- return modem_lines;
-}
-
-/* <0 means ioctl error occurred */
-int set_serial_lines( int fd, int modem_lines ) {
- return ioctl(fd, TIOCMSET, &modem_lines);
-}
-
-/* set serial port to 1200 baud, 'nbits' bits, 1 stop, no parity */
-int setup_serial_port( int fd, int nbits, struct termios *attr ) {
-
- attr->c_iflag = IGNBRK | IGNPAR;
- attr->c_cflag = 0;
- attr->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD | PARENB);
- attr->c_cflag |= CREAD | CLOCAL; /*| CRTSCTS ; */
- if (nbits == 7)
- attr->c_cflag |= CS7 | CSTOPB;
- else
- attr->c_cflag |= CS8;
- attr->c_oflag = 0;
- attr->c_lflag = 0;
-
- attr->c_cc[VMIN] = 1;
- attr->c_cc[VTIME] = 5;
-
- cfsetospeed( attr, B1200);
- cfsetispeed( attr, B1200);
- return tcsetattr(fd, TCSANOW, attr);
-}
-
-/* Initialize the serial port to a known state *before* probing. This is
- * apparently required for some Logitech mice, who will stubbornly refuse
- * to respond to PnP probes after they've been opened by gpm or XFree.
- */
-
-int init_port(int fd) {
- struct termios attr;
-
- if (tcgetattr(fd,&attr))
- return 1;
-
- cfsetospeed(&attr, B2400);
- cfsetispeed(&attr, B2400);
- attr.c_iflag = IXON | ICRNL;
- attr.c_cflag = CLOCAL | HUPCL | CREAD | B9600 | CS8;
- attr.c_oflag = 0;
- attr.c_lflag = 0;
- return tcsetattr(fd, TCSANOW, &attr);
-}
-
-
-/* Request for PnP info from serial device */
-/* See page 6 of the pnpcom doc from Microsoft */
-/* Return code tells us what happened */
-/* */
-/* PNP_COM_FATAL - error, errno has reason */
-/* PNP_COM_OK - probe initiated successfully */
-/* PNP_COM_FAIL - DSR never came on - try alterntives */
-/* means (ATI9?) to get PnP string */
-int init_pnp_com_seq1( int fd ) {
- int modem_lines;
- int temp;
- int dsr_status;
- int rc = PNP_COM_OK;
- struct termios portattr;
-
- if (init_port(fd))
- return PNP_COM_FATAL;
-
- modem_lines = get_serial_lines(fd);
-
- /* turn off RTS */
- modem_lines &= ~TIOCM_RTS;
- set_serial_lines(fd, modem_lines);
-
- /* wait 200ms for DSR=1 */
- usleep(200000);
-
- dsr_status = get_serial_lines(fd) & TIOCM_DSR;
- /* see if we got DSR coming up */
-
- if (!dsr_status) {
- /* turn DTR and RTS back on and try alternative methods */
- modem_lines |= TIOCM_DTR | TIOCM_RTS;
- set_serial_lines(fd, modem_lines);
- rc = PNP_COM_OK;
- }
-
- /* COM port Setup, 1st phase */
- /* now we set port to be 1200 baud, 7 bits, no parity, 1 stop bit */
- temp = tcgetattr(fd, &portattr);
- if (temp < 0)
- return PNP_COM_FATAL;
- /* goto 1200 baud, etc etc as PnP requires */
- temp = setup_serial_port( fd, 7, &portattr );
- if (temp < 0)
- return PNP_COM_FATAL;
-
- /* we drop DTR and RTS */
- modem_lines &= ~( TIOCM_RTS | TIOCM_DTR);
- set_serial_lines(fd, modem_lines);
- usleep(200000);
-
- /* bring DTR back up */
- modem_lines |= TIOCM_DTR;
- set_serial_lines(fd, modem_lines);
- usleep(200000);
-
- /* now entering next phase */
- modem_lines |= TIOCM_RTS;
- set_serial_lines(fd, modem_lines);
- usleep(200000);
-
- return rc;
-}
-
-
-/* Request for PnP info from serial device */
-/* Uses ATI9 code, may not do anything but return 'ERROR' */
-/* Return code tells us what happened */
-/* */
-/* PNP_COM_FATAL - error, errno has reason */
-/* PNP_COM_OK - probe initiated successfully */
-/* PNP_COM_FAIL - DSR never came on - try alterntives */
-/* means (ATI9?) to get PnP string */
-int init_pnp_com_ati9( int fd ) {
- int modem_lines;
- int temp;
- int done;
- int respindex;
- int starttime;
- unsigned char resp[100], buf[2];
- struct timeval timo;
- struct termios portattr;
-
- modem_lines = get_serial_lines(fd);
-
- /* turn off RTS */
- modem_lines &= ~TIOCM_RTS;
- set_serial_lines(fd, modem_lines);
-
- /* wait 200ms for DSR=1 */
- usleep(200000);
-
- /* now we set port to be 1200 baud, 8 bits, no parity, 1 stop bit */
- temp = tcgetattr(fd, &portattr);
- if (temp < 0) {
- modem_lines |= TIOCM_DTR | TIOCM_RTS;
- set_serial_lines(fd, modem_lines);
- return PNP_COM_FATAL;
- }
-
- /* goto 1200 baud, 8 bits */
- temp = setup_serial_port( fd, 8, &portattr );
- if (temp < 0) {
- modem_lines |= TIOCM_DTR | TIOCM_RTS;
- set_serial_lines(fd, modem_lines);
- return PNP_COM_FATAL;
- }
-
- /* turn on DTR and RTS */
- modem_lines = get_serial_lines(fd);
- modem_lines |= TIOCM_RTS | TIOCM_DTR;
- set_serial_lines(fd, modem_lines);
- usleep(200000);
-
- /* send the 'AT' command */
- if (debug_level > 0)
- printf("Sending ATI9 command to modem\n");
-
- write(fd, "ATI9\r", 5);
-
- /* start reading - read the AT command back */
- done = 0;
- respindex= 0;
- starttime=time(NULL);
- memset(resp, 0, sizeof(resp));
- while (!done) {
- timo.tv_sec=0;
- timo.tv_usec=250000;
- if (wait_for_input(fd, &timo) > 0) {
- temp = read( fd, buf, 1 );
- if (temp < 0) {
- if (errno != EAGAIN)
- return PNP_COM_FATAL;
- } else {
- resp[respindex++] = buf[0];
- resp[respindex] = 0;
- }
- } else
- done = 1;
-
- /* shouldnt run more than 5 seconds */
- if (time(NULL)-starttime > 5 )
- done = 1;
-
- if (respindex > 6)
- done = 1;
-
- if (strstr(resp, "ATI9\r"))
- done = 1;
-
- if (debug_level > 0)
- printf("ATI9 probe ->%d \"%s\"\n",respindex, resp);
- }
-
- /* see if we saw the 'OK' response */
- if (strstr(resp, "("))
- return PNP_COM_OK;
- else
- return PNP_COM_FAIL;
-
- return PNP_COM_OK;
-}
-
-/* See if this is a legacy mouse device */
-/* Only called if the PnP probe above failed */
-/* We turn off the mouse via RS232 lines, then turn it on */
-/* If it spits out an 'M' character (at 1200 baud, 7N1) */
-/* it could be a mouse. */
-/* */
-/* Return code tells us what happened */
-/* */
-/* PNP_COM_FATAL - error, errno has reason */
-/* PNP_COM_OK - probe saw 'M' */
-/* PNP_COM_FAIL - Never saw the 'M' response */
-
-int find_legacy_mouse( int fd ) {
- int modem_lines;
- int temp;
- int done;
- int starttime;
- unsigned char resp[2];
- struct timeval timo;
- struct termios portattr;
-
- /* now we set port to be 1200 baud, 7 bits, no parity, 1 stop bit */
- temp = tcgetattr(fd, &portattr);
- if (temp < 0)
- return PNP_COM_FATAL;
-
- /* goto 1200 baud, etc etc*/
- temp = setup_serial_port( fd, 7, &portattr );
- if (temp < 0)
- return PNP_COM_FATAL;
-
- /* we drop DTR and RTS */
- modem_lines = get_serial_lines(fd);
- modem_lines &= ~( TIOCM_RTS | TIOCM_DTR);
- set_serial_lines(fd, modem_lines);
- usleep(200000);
-
- /* bring them DTR back up */
- modem_lines |= TIOCM_DTR | TIOCM_RTS;
- set_serial_lines(fd, modem_lines);
-
- /* start reading - after first character we quit */
- done = 0;
- starttime=time(NULL);
- while (!done) {
- timo.tv_sec=0;
- timo.tv_usec=250000;
- if (wait_for_input(fd, &timo) > 0) {
- temp = read( fd, resp, 1 );
- if (temp < 0) {
- if (errno != EAGAIN)
- return PNP_COM_FATAL;
- } else {
- done = 1;
- }
- } else
- done = 1;
-
-
- /* shouldnt run more than 2 seconds */
- if (time(NULL)-starttime > 2 )
- done = 1;
- }
- if (*resp == 'M')
- return PNP_COM_OK;
- else
- return PNP_COM_FAIL;
-}
-
-/* See if this is a legacy modem device */
-/* Only called if the PnP probe above failed */
-/* We send a '!AT' and see if we get an 'OK' back */
-/* */
-/* Return code tells us what happened */
-/* */
-/* PNP_COM_FATAL - error, errno has reason */
-/* PNP_COM_OK - probe saw 'OK' */
-/* PNP_COM_FAIL - Never saw the 'OK' response */
-int find_legacy_modem( int fd ) {
- int modem_lines;
- int temp;
- int done;
- int respindex;
- int starttime;
- unsigned char resp[10], buf[2];
- struct timeval timo;
- struct termios portattr;
-
- /* now we set port to be 1200 baud, 8 bits, no parity, 1 stop bit */
- temp = tcgetattr(fd, &portattr);
- if (temp < 0)
- return PNP_COM_FATAL;
-
- /* goto 1200 baud, 8 bits */
- temp = setup_serial_port( fd, 8, &portattr );
- if (temp < 0)
- return PNP_COM_FATAL;
-
- /* turn on DTR and RTS */
- modem_lines = get_serial_lines(fd);
- modem_lines |= TIOCM_RTS | TIOCM_DTR;
- set_serial_lines(fd, modem_lines);
- usleep(200000);
-
- /* send the 'AT' command */
- if (debug_level > 0)
- printf("Sending AT command to modem\n");
-
- write(fd, "AT\r", 3);
-
- /* start reading - we'll get AT command back first, then modem response */
- done = 0;
- respindex= 0;
- starttime=time(NULL);
- memset(resp, 0, sizeof(resp));
- while (!done) {
- timo.tv_sec=0;
- timo.tv_usec=250000;
- if (wait_for_input(fd, &timo) > 0) {
- temp = read( fd, buf, 1 );
- if (temp < 0) {
- if (errno != EAGAIN)
- return PNP_COM_FATAL;
- } else {
- resp[respindex++] = buf[0];
- }
- } else
- done = 1;
-
- /* shouldnt run more than 5 seconds */
- if (time(NULL)-starttime > 5 )
- done = 1;
-
- if (respindex > 9)
- done = 1;
- }
-
- /* see if we saw the 'OK' response */
- if (strstr(resp, "OK"))
- return PNP_COM_OK;
- else
- return PNP_COM_FAIL;
-}
-
-/* retrieve the PnP ID string */
-/* timeout after 3 seconds */
-/* should probably set a 200 msec timeout per char, as spec says */
-/* if no char received, we're done */
-int read_pnp_string( int fd, unsigned char *pnp_string, int *pnp_len, int pnp_stringbuf_size ) {
- int pnp_index;
- int temp, done, counter;
- int seen_start;
- time_t starttime;
- struct timeval timo;
- unsigned char buf[80];
- unsigned char end_char;
-
- /* see if we have any input waiting */
- pnp_index =0;
- seen_start = 0;
- done = 0;
- end_char = 0;
- starttime=time(NULL);
- while (!done) {
- timo.tv_sec=0;
- timo.tv_usec=250000;
- if (wait_for_input(fd, &timo) > 0) {
- temp = read( fd, buf, 1 );
- if (temp < 0) {
- if (errno != EAGAIN)
- return PNP_COM_FATAL;
- } else {
- for (counter=0; counter < temp; counter++) {
- pnp_string[pnp_index++] = buf[counter];
- if (seen_start) {
- if (buf[counter] == end_char) {
- done=1;
- break;
- }
- } else {
- if (buf[counter] == BeginPnP1) {
- seen_start = 1;
- end_char = EndPnP1;
- } else if (buf[counter] == BeginPnP2) {
- seen_start = 1;
- end_char = EndPnP2;
- }
- }
- }
- }
- } else
- done = 1;
-
- /* shouldnt run more than 4 seconds */
- if (time(NULL)-starttime > 4 )
- done = 1;
-
- if (pnp_index >= pnp_stringbuf_size)
- done = 1;
- }
- pnp_string[pnp_index] = 0;
- *pnp_len=pnp_index;
- return 0;
-}
-
-/* UNUSED */
-/* simple little helper function */
-void xlate_memcpy( void *dest, void *src, int len, int xlate_flag ) {
- unsigned char *d, *s;
- int i;
-
- for (i=0,d=dest,s=src; i<len; i++, d++, s++)
- *d = (*s) + ((xlate_flag) ? 0x20 : 0 );
-}
-
-/* parse the PnP ID string into components */
-int parse_pnp_string( unsigned char *pnp_id_string, int pnp_len,
- struct pnp_com_id *pnp_id ) {
- unsigned char *p1, *p2;
- unsigned char *start;
- unsigned char *end;
- unsigned char *curpos;
- unsigned char *endfield;
- unsigned char *temppos;
- unsigned char *pnp_string;
- unsigned char end_char;
-
- int no_more_extensions=0;
- int stage;
- int len;
- unsigned short int checksum;
- char hex_checksum[5];
-
- char extension_delims[] = {EndPnP1, EndPnP2, ExtendPnP1, ExtendPnP2, 0};
- char end_delims[] = {EndPnP1, EndPnP2, 0};
-
- /* clear out pnp_id */
- memset(pnp_id, 0, sizeof(*pnp_id));
-
- /* copy pnp_string to temp space */
- pnp_string = alloca(pnp_len+1);
- memcpy(pnp_string, pnp_id_string, pnp_len+1);
-
- /* first find the start of the PnP part of string */
- p1 = memchr( pnp_string, BeginPnP1, pnp_len );
- p2 = memchr( pnp_string, BeginPnP2, pnp_len );
-
- /* use the one which points nearest to start of the string */
- /* and is actually defined */
- if ( p1 && p2 ) {
- start = (p1 < p2) ? p1 : p2;
- } else if (p1)
- start = p1;
- else if (p2)
- start = p2;
- else
- start = NULL;
-
- /* if no start then we're done */
- if (!start)
- return -1;
-
- /* the length of the initial part cannot be more than 17 bytes */
- if ((start - pnp_string) > 17)
- return -1;
-
- /* setup end character we are looking for based on the start character */
- if (start == p2) {
- pnp_id->xlate_6bit = 1;
- end_char = EndPnP2;
- /* we need to xlate data in PnP fields */
- /* remember to skip the revision fields (bytes 1 and 2 after start) */
- temppos=start;
- while (1) {
- if (*temppos == EndPnP2) {
- *temppos += 0x20;
- break;
- } else if (temppos != start+1 && temppos != start+2 )
- *temppos += 0x20;
-
- temppos++;
- }
- } else {
- pnp_id->xlate_6bit = 0;
- end_char = EndPnP1;
- }
-
- /* move everything before the start of the PnP block */
- memcpy(pnp_id->other_id, pnp_string, start-pnp_string);
- pnp_id->other_len = start - pnp_string;
-
- /* now we get the PnP fields - all were zero'd out above */
- curpos = start+1;
- memcpy(pnp_id->pnp_rev,curpos,2); curpos += 2;
- memcpy(pnp_id->eisa_id,curpos,3); curpos += 3;
- memcpy(pnp_id->product_id,curpos,4); curpos += 4;
- /* now we see if have extension fields */
- no_more_extensions = 0;
- stage = 0;
- while (!no_more_extensions) {
- if (*curpos == ExtendPnP1 || *curpos == ExtendPnP2) {
- curpos++;
- endfield = strpbrk(curpos, extension_delims);
- if (!endfield)
- return -1;
- /* if we reached the end of all PnP data, back off */
- /* cause there is a checksum at the end of extension data */
- if (*endfield == EndPnP1 || *endfield == EndPnP2)
- endfield -= 2;
- } else
- break;
-
- len = endfield - curpos;
- switch (stage) {
- case 0:
- if (len != 8 && len != 0 )
- return -1;
-
- memcpy(pnp_id->serial_number,curpos,len);
- curpos += len;
- break;
-
- case 1:
- if (len > 33)
- return -1;
- memcpy(pnp_id->class_name, curpos, len);
- curpos = endfield;
- break;
-
- case 2:
- if (len > 41)
- return -1;
- memcpy(pnp_id->driver_id, curpos, len);
- curpos = endfield;
- break;
-
- case 3:
- if (len > 41)
- return -1;
- memcpy(pnp_id->user_name, curpos, len);
- curpos = endfield;
- break;
- }
- stage++;
- }
-
- /* now find the end of all PnP data */
- end = strpbrk(curpos, end_delims);
- if (!end)
- return -1;
-
- /* if we had any extensions, we expect an checksum */
- if (stage != 0) {
- /* copy checksum into struct */
- memcpy(pnp_id->checksum, curpos, 2);
-
- /* compute the checksum as the sum of all PnP bytes, excluding */
- /* the two byte checksum. */
- checksum = 0;
- for (temppos=start; temppos <= end; temppos++) {
- /* skip checksum in calculation */
- if (temppos == (end-2) || temppos == (end-1))
- continue;
- /* dont xlate the revision at start */
- if (temppos != (start+1) && temppos != (start+2))
- checksum += *temppos - ((pnp_id->xlate_6bit) ? 0x20 : 0);
- else
- checksum += *temppos;
- }
- sprintf(hex_checksum, "%.2X", checksum & 0xff);
- if (strncmp(hex_checksum, pnp_id->checksum, 2))
- return -1;
- }
-
- /* checksum was ok, so we're done */
- return 0;
-}
-
-/* UNUSED except for debugging */
-void print_pnp_id( struct pnp_com_id id ) {
- int i;
- int extensions_exist;
- int revision_temp;
-
- if (id.other_len != 0) {
- printf("Detected non-PnP data stream at start.\n");
- printf(" Length = 0x%x\n",id.other_len);
- printf(" Contents =");
- for (i=0; i<id.other_len; i++)
- printf(" 0x%x",id.other_id[i]);
- printf("\n");
- } else
- printf("Non-PnP data stream not detected at start.\n");
-
-
- /* parse PnP revision bytes into a string values (eg. "1.00") */
- revision_temp = ((id.pnp_rev[0]&0x3f) << 6)+(id.pnp_rev[1]&0x3f);
- sprintf(id.pnp_rev_str, "%d.%d",revision_temp/100,revision_temp % 100);
-
- printf("\nPnP Required fields:\n");
- printf(" Revision = %s\n",id.pnp_rev_str);
- printf(" Manufacturer = %s\n",id.eisa_id);
- printf(" Product ID = %s\n",id.product_id);
-
- extensions_exist = id.serial_number[0] || id.class_name[0] ||
- id.driver_id[0] || id.user_name[0];
-
- if (extensions_exist) {
- printf("\nPnP extension field(s) exist:\n");
- if (id.serial_number[0])
- printf(" Serial Number = %s\n",id.serial_number);
- if (id.class_name[0])
- printf(" PnP class name = %s\n",id.class_name);
- if (id.driver_id[0])
- printf(" PnP Compatible = %s\n",id.driver_id);
- if (id.user_name[0])
- printf(" PnP Description = %s\n",id.user_name);
- }
-}
-
-int attempt_pnp_retrieve(int fd, char *pnp_string, int *pnp_strlen, int pnp_stringbuf_size) {
- int pnp_probe_status;
- int tried_at_prodding;
- int give_up;
- struct pnp_com_id pnp_id;
-
- tried_at_prodding=0;
- give_up=0;
-
- while (!give_up) {
- pnp_probe_status = init_pnp_com_seq1(fd);
- if (pnp_probe_status == PNP_COM_FATAL) {
- return(PNP_COM_FATAL);
- } else if (pnp_probe_status == PNP_COM_OK) {
- read_pnp_string(fd, pnp_string, pnp_strlen, pnp_stringbuf_size );
-
- if (debug_level > 0) {
- printf("\nPNP string = |%s|\n\n",pnp_string);
- print_hex_data(pnp_string, *pnp_strlen);
- }
-
- if (*pnp_strlen == 1 && pnp_string[0] == 'M') /* legacy mouse */
- return PNP_COM_OK;
- /* see if we got anything useful, if not try at command */
- /* to prod device into correct serial params */
- if (parse_pnp_string( pnp_string, *pnp_strlen, &pnp_id )<0)
- if (!tried_at_prodding) {
- write(fd, "AT\r", 3);
- tried_at_prodding=1;
- } else
- give_up = 1;
- else
- return PNP_COM_OK;
- } else
- give_up = 1;
- }
-
- /* try sending a ATI9 code to the modem to see if we get PnP id back */
- init_pnp_com_ati9(fd);
- read_pnp_string(fd, pnp_string, pnp_strlen, pnp_stringbuf_size );
- if (parse_pnp_string( pnp_string, *pnp_strlen, &pnp_id )<0) {
- *pnp_strlen = 0;
- pnp_string[0] = 0;
- return PNP_COM_FAIL;
- } else
- return PNP_COM_OK;
-}
-
-struct device *serialProbe(enum deviceClass probeClass, int probeFlags,
- struct device *devlist) {
- int fd;
- int temp;
- int pnp_strlen;
- int devicetype=-1;
- unsigned char pnp_string[100];
- char port[20];
- struct termios origattr;
- struct pnp_com_id pnp_id;
- struct serialDevice *serdev;
- struct stat sb;
- int maj, twelve=12;
- int console=-1;
- int stdin_line=-1;
- struct serial_struct si;
-
- if (probeFlags & PROBE_SAFE) return devlist;
-
- /* Are we on a serial console? */
- fstat(0,&sb);
- maj = major(sb.st_rdev);
- if (maj != 4 && (maj < 136 || maj > 143)) {
- if (ioctl (0, TIOCLINUX, &twelve) < 0) {
- if (ioctl (0, TIOCGSERIAL, &si) >= 0) {
- if (si.line > 0) {
- stdin_line = 1 << si.line;
- } else {
- stdin_line = 0;
- }
- } else stdin_line = 0;
- }
- }
-
- fd=open("/dev/console",O_RDWR);
- if (fd != -1) {
- fstat(fd,&sb);
- maj = major(sb.st_rdev);
- if (maj != 4 && (maj < 136 || maj > 143)) {
- if (ioctl (fd, TIOCLINUX, &twelve) < 0) {
- if (ioctl (fd, TIOCGSERIAL, &si) >= 0) {
- if (si.line > 0) {
- console = 1 << si.line;
- } else {
- console = 0;
- }
- } else console = 0;
- }
- }
- close(fd);
- }
-
-
- if (
- (probeClass == CLASS_UNSPEC) ||
- (probeClass == CLASS_OTHER) ||
- (probeClass == CLASS_MOUSE) ||
- (probeClass == CLASS_MODEM) ||
- (probeClass == CLASS_PRINTER)
- ) {
- int x;
-
- for (x=0; x<=3 ; x++) {
- struct stat sbuf;
- char lockfile[32];
- if (x==console || x==stdin_line) continue;
- snprintf(port,20,"/dev/ttyS%d",x);
-
- /* Make sure it's not in use */
- snprintf(lockfile,32,"/var/lock/LCK..ttyS%d",x);
- if (!stat(lockfile,&sbuf))
- continue;
- memset(lockfile,'\0',32);
- if (readlink("/dev/modem",lockfile,32)>0) {
- if (!strcmp(basename(port),basename(lockfile))) {
- snprintf(lockfile,32,"/var/lock/LCK..modem");
- if (!stat(lockfile,&sbuf))
- continue;
- }
- }
-
- if ((fd=open_serial_port(port)) < 0) {
- continue;
- }
- /* save the current state of the port */
- temp = tcgetattr(fd, &origattr);
- if (temp < 0) {
- close(fd);
- continue;
- }
-
- /* try twiddling RS232 control lines and see if it talks to us */
- devicetype=-1;
- pnp_strlen = 0;
- attempt_pnp_retrieve( fd, pnp_string, &pnp_strlen, sizeof(pnp_string) - 1 );
-
- /* see if we found any PnP signature */
- if (pnp_strlen != 0) {
- if (*pnp_string == 'M') { /* Legacy mouse */
- if (probeClass == CLASS_MOUSE || probeClass == CLASS_UNSPEC) {
- serdev = serialNewDevice(NULL);
- serdev->class=CLASS_MOUSE;
- serdev->device=strdup(port+5);
- serdev->desc=strdup("Generic Serial Mouse");
- serdev->driver=strdup("generic");
- if (devlist)
- serdev->next = devlist;
- devlist = (struct device *)serdev;
- if (probeFlags & PROBE_ONE) {
- tcsetattr(fd, TCSANOW, &origattr);
- tcflush(fd, TCIOFLUSH);
- close(fd);
- return devlist;
- }
- }
- tcsetattr(fd, TCSANOW, &origattr);
- close(fd);
- continue;
- }
- /* fill in the PnP com structure */
- if (parse_pnp_string( pnp_string, pnp_strlen, &pnp_id )<0) {
- goto endprobe;
- } else {
- char *foo;
- int len;
-
- if (debug_level > 0) {
- printf("PnP ID string for serial device on port %s\n",port);
- print_pnp_id( pnp_id );
- }
- serdev = serialNewDevice(NULL);
- if (pnp_id.user_name[0]) {
- serdev->pnpdesc = strdup(pnp_id.user_name);
- len = strlen(pnp_id.eisa_id)+strlen(pnp_id.product_id)+strlen(pnp_id.user_name)+3;
- foo = malloc(len);
- snprintf(foo,len,"%s|%s %s",pnp_id.eisa_id,pnp_id.product_id,pnp_id.user_name);
- } else {
- len = strlen(pnp_id.eisa_id)+strlen(pnp_id.product_id)+3;
- foo = malloc(len);
- snprintf(foo,len,"%s|%s",pnp_id.eisa_id,pnp_id.product_id);
- }
- serdev->desc=strdup(foo);
- serdev->device=strdup(port+5);
- serdev->driver=strdup("ignore");
- serdev->pnpmfr = strdup(pnp_id.eisa_id);
- serdev->pnpmodel = strdup(pnp_id.product_id);
-
- free(foo);
- foo=pnp_id.product_id;
- if (pnp_id.driver_id) {
- if (strstr(pnp_id.driver_id,"PNP"))
- foo = strstr(pnp_id.driver_id,"PNP")+3;
- serdev->pnpcompat = strdup(pnp_id.driver_id);
- }
- if (!strncmp(foo, "0F", 2))
- serdev->class = CLASS_MOUSE;
- else if (!strncmp(foo, "C", 1))
- serdev->class = CLASS_MODEM;
- else if (!strncmp(pnp_id.class_name, "Modem", 5))
- serdev->class = CLASS_MODEM;
- else
- serdev->class = CLASS_OTHER;
- if (serdev->class == probeClass || probeClass == CLASS_UNSPEC) {
- if (devlist)
- serdev->next = devlist;
- devlist = (struct device *)serdev;
- if (probeFlags & PROBE_ONE) {
- tcsetattr(fd, TCSANOW, &origattr);
- tcflush(fd, TCIOFLUSH);
- close(fd);
- return devlist;
- }
- } else {
- serdev->freeDevice(serdev);
- }
- goto endprobe;
- }
- } else {
- /* try to find a legacy device */
-
- temp = find_legacy_mouse(fd);
- if (temp == PNP_COM_FATAL) {
- goto endprobe;
- } else if (temp == PNP_COM_OK) {
- if (probeClass == CLASS_UNSPEC || probeClass == CLASS_MOUSE) {
- serdev=serialNewDevice(NULL);
- serdev->class = CLASS_MOUSE;
- serdev->device = strdup(port+5);
- serdev->driver= strdup("generic");
- serdev->desc = strdup("Generic Serial Mouse");
- if (devlist)
- serdev->next = devlist;
- devlist = (struct device *)serdev;
- if (probeFlags & PROBE_ONE) {
- tcsetattr(fd, TCSANOW, &origattr);
- tcflush(fd, TCIOFLUSH);
- close(fd);
- return devlist;
- }
- }
- goto endprobe;
- } else {
- if (debug_level > 0)
- printf("Didnt see a legacy mouse, need to ATI it now.\n");
-
- temp = find_legacy_modem(fd);
- if (temp == PNP_COM_FATAL) {
- goto endprobe;
- } else if (temp == PNP_COM_OK) {
- if (debug_level > 0)
- printf("\nLegacy modem signature seen.\n\n");
- if (probeClass == CLASS_UNSPEC || probeClass == CLASS_MODEM) {
- serdev=serialNewDevice(NULL);
- serdev->class = CLASS_MODEM;
- serdev->device = strdup(port+5);
- serdev->driver= strdup("ignore");
- serdev->desc = strdup("Generic Serial Modem");
- if (devlist)
- serdev->next = devlist;
- devlist = (struct device *)serdev;
- if (probeFlags & PROBE_ONE) {
- tcsetattr(fd, TCSANOW, &origattr);
- tcflush(fd, TCIOFLUSH);
- close(fd);
- return devlist;
- }
- }
- goto endprobe;
- } else {
- if (debug_level > 0)
- printf("Didnt see a legacy modem, game over.\n");
- }
- }
- }
-endprobe:
- tcsetattr(fd, TCSANOW, &origattr);
- tcflush(fd, TCIOFLUSH);
- close(fd);
- }
- }
- return devlist;
-}
diff --git a/tools/serial_probe/serial.h b/tools/serial_probe/serial.h
deleted file mode 100644
index 75d178ce9..000000000
--- a/tools/serial_probe/serial.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* Copyright 1999 Red Hat, Inc.
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#ifndef _KUDZU_SERIAL_H_
-#define _KUDZU_SERIAL_H_
-
-#include "device.h"
-
-struct serialDevice {
- /* common fields */
- struct device *next; /* next device in list */
- int index;
- enum deviceClass class; /* type */
- enum deviceBus bus; /* bus it's attached to */
- char * device; /* device file associated with it */
- char * driver; /* driver to load, if any */
- char * desc; /* a description */
- int detached;
- /* serial-specific fields */
- struct serialDevice *(*newDevice) (struct serialDevice *dev);
- void (*freeDevice) (struct serialDevice *dev);
- void (*writeDevice) (FILE *file, struct serialDevice *dev);
- int (*compareDevice) (struct serialDevice *dev1, struct serialDevice *dev2);
- char * pnpmfr;
- char * pnpmodel;
- char * pnpcompat;
- char * pnpdesc;
-
-};
-
-struct serialDevice *serialNewDevice(struct serialDevice *dev);
-struct device *serialProbe(enum deviceClass probeClass, int probeFlags,
- struct device *devlist);
-
-#endif
diff --git a/tools/serial_probe/serial_probe.c b/tools/serial_probe/serial_probe.c
deleted file mode 100644
index b8abb6917..000000000
--- a/tools/serial_probe/serial_probe.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/* Copyright 1999 MandrakeSoft <fpons@mandrakesoft.com>
- *
- * The following file used by this one are copyrighted by RedHat and
- * are taken from kudzu :
- * device.h
- * serial.h
- * serial.c
- * This file is taken from kudzu.c copyrighted by RedHat, 1999.
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include "serial.h"
-#include "device.h"
-
-typedef struct device *(newFunc)(struct device *);
-typedef int (initFunc)();
-typedef struct device *(probeFunc)(enum deviceClass, int, struct device *);
-
-char *classStrings[] = {
- "UNSPEC", "OTHER", "NETWORK", "SCSI", "VIDEO", "AUDIO",
- "MOUSE", "MODEM", "CDROM", "TAPE", "FLOPPY", "SCANNER",
- "HD", "RAID", "PRINTER", "CAPTURE", "KEYBOARD", NULL
-};
-
-struct device *newDevice(struct device *old, struct device *new) {
- if (!old) {
- if (!new) {
- new = malloc(sizeof(struct device));
- memset(new,'\0',sizeof(struct device));
- }
- new->class = CLASS_UNSPEC;
- } else {
- new->class = old->class;
- if (old->device) new->device = strdup(old->device);
- if (old->driver) new->driver = strdup(old->driver);
- if (old->desc) new->desc = strdup(old->desc);
- }
- new->newDevice = newDevice;
- new->freeDevice = freeDevice;
- new->compareDevice = compareDevice;
- return new;
-}
-
-void freeDevice(struct device *dev) {
- if (!dev) {
- printf("freeDevice(null)\n");
- abort(); /* return; */
- }
- if (dev->device) free (dev->device);
- if (dev->driver) free (dev->driver);
- if (dev->desc) free (dev->desc);
- free (dev);
-}
-
-void writeDevice(FILE *file, struct device *dev) {}
-int compareDevice(struct device *dev1, struct device *dev2) { return 0; }
-
-int main () {
- struct device* devices = NULL;
- struct serialDevice* serialDevice = NULL;
-
- devices = serialProbe(CLASS_UNSPEC, 0, devices);
- while (devices) {
- serialDevice = (struct serialDevice*)devices;
-
- printf("CLASS=%s\n", classStrings[serialDevice->class]);
- printf("BUS=SERIAL\n");
- printf("DEVICE=/dev/%s\n", serialDevice->device);
- printf("DRIVER=%s\n", serialDevice->driver);
- if (!serialDevice->pnpdesc) printf("DESCRIPTION=%s\n", serialDevice->desc);
- if (serialDevice->pnpmfr) printf("MANUFACTURER=%s\n", serialDevice->pnpmfr);
- if (serialDevice->pnpmodel) printf("MODEL=%s\n", serialDevice->pnpmodel);
- if (serialDevice->pnpcompat) printf("COMPAT=%s\n", serialDevice->pnpcompat);
- if (serialDevice->pnpdesc) printf("DESCRIPTION=%s\n", serialDevice->pnpdesc);
- printf("\n");
-
- devices=devices->next;
- }
-
- return 0;
-}
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-14 18:35:28 +0000