diff options
Diffstat (limited to 'rescue/tree/etc/oem')
| -rwxr-xr-x | rescue/tree/etc/oem | 674 |
1 files changed, 0 insertions, 674 deletions
diff --git a/rescue/tree/etc/oem b/rescue/tree/etc/oem deleted file mode 100755 index 7b87a4560..000000000 --- a/rescue/tree/etc/oem +++ /dev/null @@ -1,674 +0,0 @@ -#!/usr/bin/perl - -if (shift(@ARGV) ne '-f') { - print "Call it with option -f, but don't fear loosing all your data, this command is dangerous!"; - print " -usage: /etc/oem -f [options] -where [options] are: - server : allow server installalation - boot_entries=entry1,...,entryN : set boot entries to use, - the first one is the default one - no<option> : disable options <option> -"; - exit 1; -} -my (%options, $yes, $hd, $hdp, $cd, $fs); - -#- avoid globing as it is not available in rescue ramdisk. -foreach my $device (split ' ', `/bin/ls -d /proc/ide/hd*`) { - open F, "$device/media" or next; - foreach (<F>) { - /disk/ and do { $hd ||= $device; $hd =~ s,/proc/ide/,,; }; - /cdrom/ and do { $cd ||= $device; $cd =~ s,/proc/ide/,,; }; - } - close F; -} -#- examine available SCSI devices (avoid SCSI floppies like LS-120 or ZIP disk or generic floppies). -eval { - system "/usr/bin/drvinst"; #- load scsi drivers else it wont do anything. - - my ($driveNum, $cdromNum) = (0, 0); - open F, "/proc/scsi/scsi" or die "no scsi available"; - local $_ = <F>; /^Attached devices:/ or die "to attached devices found"; - while ($_ = <F>) { - my ($id) = /^Host:.*?Id: (\d+)/ or die "no host found"; - $_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or die "no vendor nor model found"; - $_ = <F>; my ($type) = /^\s*Type:\s*(.*)/; - if ($type =~ /Direct-Access/ && $model !~ /ZIP\s+\d+|LS-?120|144MB|[Ff]loppy/) { - $hd ||= "sd" . chr($driveNum++ + ord('a')); - } elsif ($type =~ /CD-ROM/) { - $cd ||= "scd" . $cdromNum++; - } - } - close F; -}; -#- examine DAC960 device. -#- there is a problem as there is no more than 7 partitions available, this means no /home and no /var. -unless ($hd) { - local $_; - open F, "dmesg |"; - while (<F>) { - m|/dev/(rd/.*?): .*?,| and $hd ||= $1, last; - } - close F; - if ($hd) { - my ($c_id, $d_id) = $hd =~ m|rd/c(\d+)d(\d+)|; - -d "/dev/rd" or mkdir "/dev/rd"; - system "mknod", "/dev/$hd", "b", 48+$c_id, 8*$d_id; - foreach (1..7) { - system "mknod", "/dev/${hd}p$_", "b", 48+$c_id, 8*$d_id+$_; - } - $hdp = $hd . 'p'; - } -} -#- examine Compaq Smart Array device. -unless ($hd) { - foreach ('array/ida', 'cpqarray/ida', 'cciss/cciss') { - my $prefix = "/proc/driver/$_"; #- kernel 2.4 places it here - $prefix = "/proc/$_" if !-e "${prefix}0"; #- kernel 2.2 - - my ($name) = m|/(.*)|; - for (my $i = 0; -r ($f = "${prefix}$i"); $i++) { - local $_; - open F, $f; - while (<F>) { - if (m|^\s*($name/.*?):|) { - $hd ||= $1; - } - } - close F; - } - } - if ($hd) { - my ($type, $c_id, $d_id) = $hd =~ m,(ida|cciss)/c(\d+)d(\d+),; - -d "/dev/$type" or mkdir "/dev/$type"; - system "mknod", "/dev/$hd", "b", ($type eq 'ida' ? 72 : 104)+$c_id, 16*$d_id; - foreach (1..15) { - system "mknod", "/dev/${hd}p$_", "b", ($type eq 'ida' ? 72 : 104)+$c_id, 16*$d_id+$_; - } - $hdp = $hd . 'p'; - } -} -$hd && -e "/dev/$hd" or die "unable to access hard disk"; -print "hd: $hd\ncd: $cd\n"; -$hdp ||= $hd; - -#- try to free any reference to hard disk which will be used (as in rescue mode it has already loaded -#- existing partition in /mnt. -open F, "/proc/mounts"; -while (<F>) { - /$hdp(\d*)\s+(\S+)/ and $already_mounted{$2} = "$hdp$1"; -} -foreach (sort { $b cmp $a } keys %already_mounted) { - print "umounting $already_mounted{$_} from $_\n"; - system "umount", $_; -} - -#- find a cdrom (like) image, normally a true cdrom but if nfs install is running, use it instead. -mkdir "/cdrom"; -open F, "/proc/cmdline"; -while (<F>) { - /automatic=method:nfs,.*server:([^\s,]*),.*directory:([^\s,]*)/ - and system "mount", "-r", "-t", "nfs", "$1:$2", "/cdrom", "-o", "nolock"; -} -close F; -unless (-e "/cdrom/VERSION") { - -e "/dev/$cd" or die "unable to access local cdrom"; - system "mount", "-r", "-t", "iso9660", "/dev/$cd", "/cdrom"; -} - -#- using default options for HP. -#$options{free_size} = 500; -#$options{free_primary} = 1; -#$options{free_fs} = 'fat32'; -#$options{boot_entries} = 'linux,linux-nonfb,restore,failsafe,floppy'; -#$options{kernel} = "acpi=off"; - -open F, "/cdrom/VERSION" or die "no installation cdrom found on $cd"; -while (<F>) { - /\[boot_entries[=:]([^]]*)\]/ and $options{boot_entries} = $1; - /\[ext2\]/ and $options{fs} = "ext2"; - /\[ext3\]/ and $options{fs} = "ext3"; -} -close F; -foreach (@ARGV) { /^([^=:]*)[=:]?(.*)/ and $options{$1} = $2; /^no([^=:]*)/ and delete $options{$1} } - -foreach (keys %options) { - print "Using option [$_" . ($options{$_} && "=$options{$_}") . "]\n"; -} - -#- filesystem to use. -$fs ||= $options{fs} || "ext3"; -$fs eq "ext3" and system "modprobe", "ext3"; -print "Using filesystem of type $fs\n"; - -#- check for already existing partition table, if none are found -#- create 3 partitions (one for install, one for swap and one for root). -#- if only a fat partition is found, resize it do include the above partition. -#- other combination are really dangerous and are not supported, ask -#- the user that all data on the disk will be erased and go on. -my ($heads, $sectors, $cylinders, $hd_size, @hd_parts); -sub correct_start_end { - my ($rstart, $end, $keep_start) = @_; - my ($cylinder_size, $c_start, $c_end) = ($sectors*$heads*512/1024/1024, undef, undef); - if (abs($cylinder_size*$cylinders-$hd_size)/$hd_size < 0.01) { - $c_start = $$rstart+($keep_start ? 0 : $cylinder_size/$heads); - $c_end = $cylinder_size*int(1/2+$end/$cylinder_size); - $c_end > $hd_size and $c_end = $hd_size; - $$rstart = $c_end; - } else { - $c_start = $$rstart; - $c_end = $end; - $c_end > $hd_size and $c_end = $hd_size; - $$rstart = $c_end+5; #- fall back to use a problable safe method. - } - $c_start >= $c_end and die "no space left for partitionning\n"; - ($c_start, $c_end); -} -open F, "fdisk -l /dev/$hd |"; -while (<F>) { - /(\d+)\s*heads/ and $heads = $1; - /(\d+)\s*sectors/ and $sectors = $1; - /(\d+)\s*cylinders/ and $cylinders = $1; -} -if ($heads == 1 && $cylinders == 1) { - $cylinders = $sectors / 255 / 63; - $heads = 255; - $sectors = 63; -} -close F; -for (1..2) { - open F, "parted /dev/$hd -s print |"; - while (<F>) { - /^Disk geometry [^:]*:\s*([\d\.]+)-([\d\.]+)/ and do { $hd_size = $2 - $1 - 1 }; - #/^Disk label type:\s*msdos/ and do { $hd_type = 'msdos' }; - /^(\d+)\s+([\d\.]+)\s+([\d\.]+)\s+(primary|logical|extended)\s*(\S*)/ and do { - #- this automatically drops extended partition here! - push @hd_parts, { minor => $1, start => $2, end => $3, type => $4, fstype => $5 }; - }; - } - close F; - $hd_size and last; - print "Unable to detect partition on disk, trying with new label\n"; - do { - print " - -I'm going to install the OEM version on your hard drive -[1;31;40m!!ALL DATA WILL BE LOST!![0m - -Type \`\`yes'' and [enter] to go on\n" - } while (($yes = <STDIN>) !~ /^\s*yes\s*$/i); - system "parted", "/dev/$hd", "mklabel", "msdos"; -} -my $min_size = $options{min_size} || 9000; -my $def_size = $options{def_size} || 8500; -my $trigger_size = $options{trigger_size} || 9000; -#my $inst_size = $options{inst_size} || 1500; -my $inst_size = $options{inst_size} || 5000; -my $swap_size = $options{swap_size} || 128; -$hd_size > $min_size or die "hard disk is too small to contain oem install (${hd_size}MB found, need $min_size at least)"; - -my ($fat_pos, $resize_fat_size, $root_size); -if (@hd_parts == 1 && $hd_parts[$fat_pos = 0]{fstype} eq 'FAT' || - @hd_parts == 2 && $hd_parts[0]{type} eq 'primary' && $hd_parts[$fat_pos = 1]{fstype} eq 'FAT' || - @hd_parts == 3 && $hd_parts[0]{type} eq 'primary' && $hd_parts[1]{type} eq 'primary' && $hd_parts[$fat_pos = 2]{fstype} eq 'FAT' || - @hd_parts == 2 && $hd_parts[0]{type} eq 'extended' && $hd_parts[$fat_pos = 1]{fstype} eq 'FAT' || - @hd_parts == 3 && $hd_parts[0]{type} eq 'extended' && $hd_parts[1]{type} eq 'primary' && $hd_parts[$fat_pos = 5]{fstype} eq 'FAT') { - if ($hd_size - $hd_parts[$fat_pos]{end} > $min_size + $options{free_size}) { - #- check first if there are some available space left on the disk. - #- so we are using it, root_size is fixed to match hard disk size. - $resize_fat_size = 0; - $root_size = $hd_size - $hd_parts[$fat_pos]{end} - $options{free_size} - $inst_size - $swap_size; - $root_size > $trigger_size and $root_size = $def_size; - } elsif ($hd_size > 2*$min_size + $options{free_size}) { - #- resize this fat partition. - $resize_fat_size = 0.5 * $hd_size; - $root_size = $hd_size - $resize_fat_size - $options{free_size} - $inst_size - $swap_size; - $root_size > $trigger_size and $root_size = $def_size; - } -} -unless ($root_size) { - #- there have not been defined above, so remove everything and start from - #- a blank partition. - $resize_fat_size = undef; - $root_size = $hd_size - $resize_fat_size - $options{free_size} - $inst_size - $swap_size; - $root_size > $trigger_size and $root_size = $def_size; -} - -#- launch parted to edit partition table, start at minor. -#- point define where we start. -my $minor = defined $resize_fat_size && $hd_parts[0]{type} eq 'extended' ? 6 : 5; -my $point = 0.0; -my @commands; - -if (defined $resize_fat_size) { - do { - print " - -[1;31;40m!!An existing Windows partition has been found and will be kept. -Additional Linux partitions will be created!![0m - -Type \`\`yes'' and [enter] to go on\n" - } while (($yes = <STDIN>) !~ /^\s*yes\s*$/i); - #- keep the current partition table, and try to resize the fat partition - #- if the size is not 0. - #- KEEP IN MIND there is only one partition defined. - if ($resize_fat_size) { - $point = $hd_parts[$fat_pos]{start}; - push @commands, sprintf "resize %d %s %s", $hd_parts[$fat_pos]{minor}, correct_start_end(\$point, $point+$resize_fat_size, 'keepstart'); - } else { - $point = $hd_parts[$fat_pos]{end}; - } - $point+=9; #- keep blank space between partitions if parted cannot handle partition table correctly. -} else { - unless (defined $yes) { - do { - print " - -I'm going to install the OEM version on your hard drive -[1;31;40m!!ALL DATA WILL BE LOST!![0m - -Type \`\`yes'' and [enter] to go on\n" - } while (($yes = <STDIN>) !~ /^\s*yes\s*$/i); - } - #- build a new disk label here. - push @commands, "mklabel msdos"; -} - -#- at this point, the partition are created. -my ($instz, $inst, $swap, $root, $var, $home, $free) = ($minor-1, $minor, $minor+1, $minor+2, undef, undef, undef); - -#- all linux partition are stored inside an extended partition, this is easier to manipulate after. -my $free_point = $point; -if ($minor == 5) { - push @commands, sprintf "mkpart extended %s %s", correct_start_end(\$free_point, $hd_size - ($options{free_primary} && $options{free_size}), - 'keepstart'); -} else { - $hd_parts[0]{type} eq 'extended' or die "first partition assumed to be extended"; - $point = $hd_parts[0]{start}; - push @commands, sprintf "resize %s %s %s", $hd_parts[0]{minor}, correct_start_end(\$free_point, - $hd_size - ($options{free_primary} && $options{free_size}), - 'keepstart'); -} -push @commands, sprintf "mkpart logical ext2 %s %s", correct_start_end(\$point, $point+$inst_size); -push @commands, sprintf "mkpart logical linux-swap %s %s", correct_start_end(\$point, $point+$swap_size); -push @commands, sprintf "mkpart logical %s %s %s", $fs, correct_start_end(\$point, $point+$root_size); -if (exists $options{server} && $hd !~ /^rd\//) { - my $var_size = ($hd_size - $point) / 2; - if ($var_size > 1500) { - $var = $root+1; - push @commands, sprintf "mkpart logical %s %s %s", $fs, correct_start_end(\$point, $point+$var_size); - } -} -if ($hd_size - $point - $options{free_size} > 100 && $hd !~ /^rd\//) { - $home = ($var || $root) + 1; - push @commands, sprintf "mkpart logical %s %s %s", $fs, correct_start_end(\$point, $hd_size-$options{free_size}); -} -if ($options{free_size} && $options{free_fs}) { - if ($options{free_primary}) { - $free = scalar(grep { $_->{type} eq 'primary' } @hd_parts) + 2; - if ($free > 4) { - $free = ($home || $var || $root) + 1; - delete $options{free_primary}; - print "Unable to use primary partition for free partition, using logical partition.\n"; - } - } else { - $free = ($home || $var || $root) + 1; - } - push @commands, sprintf "mkpart %s %s %s %s", $options{free_primary} ? 'primary' : 'logical', $options{free_fs}, correct_start_end($options{free_primary} ? \$free_point : \$point, $hd_size); -} -system("parted", "-s", "/dev/$hd", @commands) == 0 or die "unable to partition the disk $hd"; - -#- try to help user if a free space has been set and no fs defined for it. -if ($options{free_size} && !$options{free_fs}) { - print " - -[1;31;40m!!A free space has been configured, now you can use parted -to defined the partition as you want.[0m - -Type \`\`quit'' and [enter] to finish parted\n"; - system "parted", "-i", "/dev/$hd"; -} - -#- we have to build swap and mount it. -print "Setting swap\n"; -system "mkswap", "/dev/$hdp$swap"; -system "swapon", "/dev/$hdp$swap"; - -#- we have to format using right fs. -print "Formatting /dev/$hdp$inst partition\n"; -mkfs("ext2", "/dev/$hdp$inst"); -print "Formatting /dev/$hdp$root partition\n"; -mkfs($fs, "/dev/$hdp$root"); -if ($var) { - print "Formatting /dev/$hdp$var partition\n"; - mkfs($fs, "/dev/$hdp$var"); -} -if ($home) { - print "Formatting /dev/$hdp$home partition\n"; - mkfs($fs, "/dev/$hdp$home"); -} -if ($free) { - print "Formatting /dev/$hdp$free partition\n"; - mkfs($options{free_fs}, "/dev/$hdp$free"); -} - -print "Mounting partitions\n"; -mkdir "/hd"; -system "mount", "-t", "ext2", "/dev/$hdp$inst", "/hd"; -mkdir "/mnt"; -system "mount", "-t", $fs, "/dev/$hdp$root", "/mnt"; -if ($var) { - mkdir "/mnt/var"; - system "mount", "-t", $fs, "/dev/$hdp$var", "/mnt/var"; -} -if ($home) { - mkdir "/mnt/home"; - system "mount", "-t", $fs, "/dev/$hdp$home", "/mnt/home"; -} - -print "Copying installation on hard drive\n"; -mkdir "/hd/boot"; -if (-e "/cdrom/oem/vmlinuz" && -e "/cdrom/oem/all.rdz") { - system "cp", "-a", "/cdrom/oem/vmlinuz", "/hd/boot/vmlinuz"; - system "cp", "-a", "/cdrom/oem/all.rdz", "/hd/boot/all.rdz"; -} elsif (-e "/cdrom/isolinux/alt0/vmlinuz" && -e "/cdrom/isolinux/alt0/all.rdz") { - system "cp", "-a", "/cdrom/isolinux/alt0/vmlinuz", "/hd/boot/vmlinuz"; - system "cp", "-a", "/cdrom/isolinux/alt0/all.rdz", "/hd/boot/all.rdz"; -} elsif (-e "/cdrom/boot/vmlinuz" && -e "/cdrom/boot/hd.rdz") { - system "cp", "-a", "/cdrom/boot/vmlinuz", "/hd/boot/vmlinuz"; - system "cp", "-a", "/cdrom/boot/hd.rdz", "/hd/boot/all.rdz"; -} elsif (-e "/cdrom/images/hd.img") { - mkdir "/tmp/hd"; - system "modprobe", "loop"; - system "modprobe", "vfat"; - system "mount", "-t", "vfat", "/cdrom/images/hd.img", "/tmp/hd", "-o", "loop"; - system "cp", "-a", "/tmp/hd/vmlinuz", "/hd/boot/vmlinuz"; - system "cp", "-a", "/tmp/hd/hd.rdz", "/hd/boot/all.rdz"; - system "umount", "/tmp/hd"; -} else { - die "no installation stage1 found"; -} - -mkdir "/hd/Mandrake"; -mkdir "/hd/Mandrake/RPMS"; -system "cp", "-a", "/cdrom/VERSION", "/hd"; -system "cp", "-a", "/cdrom/Mandrake/base", "/cdrom/Mandrake/mdkinst", "/cdrom/Mandrake/share", "/hd/Mandrake"; - -if (open F, ">/hd/Mandrake/oem_patch.pl") { - print "Setting OEM specific extension to DrakX\n"; - if (exists $options{server}) { - print F q{ - use install_steps; - package install_steps; - undef *choosePackages; - *choosePackages = sub { - my ($o, $packages, $compssUsers, $first_time) = @_; - - #- make sure we kept some space left for available else the system may - #- not be able to start (xfs at least). - my $available = install_any::getAvailableSpace($o); - my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024); - - #- avoid destroying user selection of packages but only - #- for expert, as they may have done individual selection before. - install_any::unselectMostPackages($o); - - #- use specific OEM packages selection, go to level 5 - #- and disable some extension. - $o->{compssUsersChoice}{$_} = 0 foreach 'GNOME'; - $o->{compssUsersChoice}{$_} = 0 - foreach map { @{$o->{compssUsers}{$_}{flags}} } 'Workstation|Office Workstation', 'Workstation|Internet station'; - $o->{compssListLevel} = 5; - pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $o->{compssListLevel}, $availableCorrected); - - $availableCorrected; - }; - }; - } else { - print F q{ - use install_steps; - package install_steps; - undef *choosePackages; - *choosePackages = sub { - my ($o, $packages, $compssUsers, $first_time) = @_; - - #- make sure we kept some space left for available else the system may - #- not be able to start (xfs at least). - my $available = install_any::getAvailableSpace($o); - my $availableCorrected = pkgs::invCorrectSize($available / sqr(1024)) * sqr(1024); - - #- avoid destroying user selection of packages but only - #- for expert, as they may have done individual selection before. - install_any::unselectMostPackages($o); - - #- use specific OEM packages selection, go to level 4. - #- and select at least GAMES group, everything else has - #- already be selected during master preparation. - $o->{compssListLevel} = 4; - $o->{compssUsersChoice}{$_} = 1 foreach qw(GAMES VIDEO AUDIO GRAPHICS); - pkgs::setSelectedFromCompssList($packages, $o->{compssUsersChoice}, $o->{compssListLevel}, $availableCorrected); - - $availableCorrected; - }; - }; - } - if ($options{boot_entries}) { - print "Setting OEM specific extension for boot entries\n"; - print F q{ - my $sorted_entries = q(} . $options{boot_entries} . q{); #- insert boot_entries options here as string q(...). - my $old_setupBootloaderBefore = \&setupBootloaderBefore; - undef *setupBootloaderBefore; - *setupBootloaderBefore = sub { - $old_setupBootloaderBefore->(@_); - my @entries = split ',', $sorted_entries; - my @result_entries; - foreach my $p (@entries) { - foreach (@{$_[0]{bootloader}{entries}}) { - $_->{label} eq $p and push @result_entries, $_; - } - } - if (@result_entries) { - $_[0]{bootloader}{entries} = \@result_entries; - $_[0]{bootloader}{default} = $result_entries[0]{label}; #- first image is default. - } - }; - }; - } - close F; -} - -print "Setting bootloader\n"; -mkdir "/hd/boot/grub"; -foreach (1..2) { - -e "/hd/boot/grub/stage$_" or system "cp", "-a", "/boot/grub/stage$_", "/hd/boot/grub"; -} -open F, ">/hd/boot/grub/menu.lst"; -if (defined $resize_fat_size) { - print F "timeout 5\n"; - print F "color black/cyan yellow/cyan\n\n"; - print F "title linux\n"; -} else { - print F "timeout 0\n\n"; - print F "title oem\n"; -} -print F "kernel (hd0,$instz)/boot/vmlinuz ramdisk_size=128000 $options{kernel} automatic=method:disk,disk:$hd,partition:$hdp$inst,directory:/ hd vga=788 fbeginner oem defcfg=/tmp/hdimage/Mandrake/oem_patch.pl\n"; -print F "initrd (hd0,$instz)/boot/all.rdz\n"; -#- if a windows partition is available, add an entrie for it. -if (defined $resize_fat_size) { - print F "\ntitle windows\n"; - printf F "rootnoverify (hd0,%s)\n", $hd_parts[$fat_pos]{minor}-1; - print F "makeactive\n"; - print F "chainloader +1\n"; -} -close F; -open F, ">/hd/boot/grub/device.map"; -print F "(hd0) /dev/$hd\n"; -close F; -open F, "| grub --device-map=/hd/boot/grub/device.map --batch"; -print F "install (hd0,$instz)/boot/grub/stage1 d (hd0) (hd0,$instz)/boot/grub/stage2 p (hd0,$instz)/boot/grub/menu.lst\n"; -print F "quit\n"; -close F or die "error while executing grub"; - -my $packages = read_depslist("/cdrom/Mandrake/base/depslist.ordered"); - -my @media; -open F, "/cdrom/Mandrake/base/hdlists"; -foreach (<F>) { - chomp; - s/\s*#.*$//; - /^\s*$/ and next; - m/^\s*(hdlist\S*\.cz2?)\s+(\S+)\s*(.*)$/ or die "invalid hdlist description \"$_\" in hdlists file"; - - push @media, { hdlist => $1, rpmsdir => $2, descr => $3 }; -} -close F; - -#- initialize installation. -foreach (qw(/etc /etc/sysconfig /etc/rpm /var /var/lib /var/lib/rpm /var/log /proc)) { - mkdir "/mnt/$_"; -} -system "mount", "-t", "proc", "proc", "/mnt/proc"; -open F, ">/mnt/etc/fstab"; -print F "/dev/$hdp$root / $fs defaults 1 1\n"; -if ($var) { - print F "/dev/$hdp$var /var $fs defaults 1 2\n"; -} -if ($home) { - print F "/dev/$hdp$home /home $fs defaults 1 2\n"; -} -close F; -#- stupid things for installer to work correctly. -#open F, ">/mnt/etc/mandrake-release"; -#print F "Mandrake Linux release 9.1 (Bamboo) for i586"; -#close F; - -#- keep in mind all the rpm files available (according to hdlists). -my (%files, %rpms); - -require packdrake; -foreach my $medium (@media) { - my $packer = new packdrake("/cdrom/Mandrake/base/$medium->{hdlist}"); - foreach (@{$packer->{files}}) { - $packer->{data}{$_}[0] eq 'f' or next; - my ($fullname, $file) = /([^:]*):(.*)/ ? ($1, "$2.rpm") : ($_, "$_.rpm"); - $files{$fullname} = $file; - $rpms{$fullname} = $medium->{rpmsdir}; - #- convert %{ARCH} to effective arch of the given package. - my ($arch) = $fullname =~ /\.([^\.\-]*)$/; - $rpms{$fullname} =~ s|%{ARCH}|$arch|g; - } -} - -#- install some important packages. -system "rpm", "--root", "/mnt", "--initdb"; - -#- copy and install from each cd image. -foreach my $medium (@media) { - my $rpmsidr = $medium->{rpmsdir}; - $rpmsdir =~ s|%{ARCH}.*||; #- only for checking directory presence... - while ($cd && ! -d "/cdrom/$rpmsdir") { - system "unmount", "/dev/$cd"; - system "eject", "/dev/$cd"; - print "Please insert the cdrom labeled \"$medium->{descr}\"\n and press [enter] when done\n"; - $yes = <STDIN>; - system "mount", "-r", "-t", "iso9660", "/dev/$cd", "/cdrom"; - } - - print "Copying packages from medium labeled \"$medium->{descr}\" to hard disk\n"; - foreach my $pkg (@{$packages->{depslist}}) { - $files{rpm_fullname($pkg)} or next; - my $infile = "/cdrom/" . $rpms{rpm_fullname($pkg)} . "/" . $files{rpm_fullname($pkg)}; - my $outfile = "/hd/" . $rpms{rpm_fullname($pkg)} . "/" . $files{rpm_fullname($pkg)}; - if (-r $infile && -s $infile != -s $outfile) { - -d "/hd/" . $rpms{rpm_fullname($pkg)} or system "mkdir", "-p", "/hd/" . $rpms{rpm_fullname($pkg)}; - print " copying " . rpm_fullname($pkg) . "\n"; - system "cp", "-a", $infile, $outfile; - if (rpm_fullname($pkg) =~ /mandrake-release/) { - system "rpm", "-Uvh", "--root", "/mnt", "--nodeps", "--force", $outfile; - } - #- clean to say everything is done. - delete $files{rpm_fullname($pkg)}; - delete $rpms{rpm_fullname($pkg)}; - } - } -} - -#- try to figure out if a oem-message-graphic already exists. -#- if this is the case, rename it to /mnt/boot/message-graphic -if (-e "/cdrom/Mandrake/base/oem-message-graphic") { - print "Using specific oem graphic image\n"; - if (-e "/mnt/boot/message-graphic") { - rename "/mnt/boot/message-graphic", "/mnt/boot/message-graphic.old"; - system "cp", "-a", "/cdrom/Mandrake/base/oem-message-graphic", "/mnt/boot/message-graphic"; - } elsif (-e "/mnt/boot/lilo-graphic/message") { - rename "/mnt/boot/lilo-graphic/message", "/mnt/boot/lilo-graphic/message.old"; - system "cp", "-a", "/cdrom/Mandrake/base/oem-message-graphic", "/mnt/boot/lilo-graphic/message"; - } -} - -#- clean all initrd image which may have been built. -system "rm -f /mnt/boot/initrd*"; - -system "umount", "/mnt/proc"; -$home and system "umount", "/mnt/home"; -$var and system "umount", "/mnt/var"; -system "umount", "/mnt"; -system "umount", "/hd"; -system "umount", "/cdrom"; - -$cd and system "eject", "/dev/$cd"; - -print " -Done. OEM hard drive ready! -The hard drive is now ready for a customer. -System is now halted.\n\n"; - -system "halt"; - -#- gives way to format partition (simpler approach) -sub mkfs { - my ($fs, $dev) = @_; - for ($fs) { - /ext2/ and do { system "mkfs.ext2", $dev; - next }; - /ext3/ and do { system "mkfs.ext2", "-j", $dev; - system "tune2fs", "-c0", "-i0", $dev; - next }; - /fat16/ and do { system "mkdosfs", $dev; - next }; - /fat32/ and do { system "mkdosfs", "-F", "32", $dev; - next }; - die "unknown fs: $_\n"; - } -} - -sub chop_version { - ($_[0] =~ /^([^:\s]*)-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*(?::\S*)?/)[0] || die "unable to parse $_[0]"; -} -sub rpm_fullname { - ($_[0]{name} =~ /^([^:\s]*-[^:\-\s]+-[^:\-\s]+\.[^:\.\-\s]*)(?::\S*)?/)[0] || die "unable to parse $_[0]"; -} - -sub read_depslist { - my ($file) = @_; - my $packages = { depslist => [], names => {} }; - - #- read depslist.oredered file. - my $id = 0; - - open F, "$file" or die "unable to open ordered dependencies list file"; - while (<F>) { - my ($name, $size, @deps) = split; - push @{$packages->{depslist}}, { id => $id++, name => $name, size => $size, deps => \@deps }; - } - close F; - - foreach (@{$packages->{depslist}}) { - $packages->{names}{chop_version($_->{name})} = $_; - } - - print "read " . scalar(@{$packages->{depslist}}) . " package dependancies\n"; - $packages; -} - |