drakx - Mageia Installer and base platform for many utilities

index : drakx

Mageia Installer and base platform for many utilities

Thierry Vignaud [tv]

summary refs log tree commit diff stats

path: root/perl-install

diff options

Diffstat (limited to 'perl-install')

-rw-r--r--

perl-install/Xconfigurator.pm

1 files changed, 1 insertions, 1 deletions

href='#n128'>128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 407 408 409 410 411 412 413 414 415 416 417 418 419 420 421 422 423 424 425 426 427 428 429 430 431 432 433 434 435 436 437 438 439 440 441 442 443 444 445 446 447 448 449 450 451 452 453 454 455 456 457 458 459 460 461 462 463 464 465 466 467 468 469 470 471 472 473 474 475 476 477 478 479 480 481 482 483 484 485 486 487 488 489 490 491 492 493 494 495 496 497 498 499 500 501 502 503 504 505 506 507 508 509 510 511 512 513 514 515 516 517 518 519 520 521 522 523 524 525 526 527 528 529 530 531 532 533 534 535 536 537 538 539 540 541 542 543 544 545 546 547 548 549 550 551 552 553 554 555 556 557 558 559 560 561 562 563 564 565 566 567 568 569 570 571 572 573 574 575 576 577 578 579 580 581 582 583 584 585 586 587 588 589 590 591 592 593 594 595 596 597 598 599 600 601 602 603 604 605 606 607 608 609 610 611 612 613 614 615 616 617 618 619 620 621 622 623 624 625 626 627 628 629 630 631 632 633 634 635 636 637 638 639 640 641 642 643 644 645 646 647 648 649 650 651 652 653 654 655 656 657 658 659 660 661 662 663 664 665 666 667 668 669 670 671 672 673 674 675 676 677 678 679 680 681 682 683 684 685 686 687 688 689 690 691 692 693 694 695 696 697 698 699 700 701 702 703 704 705 706 707 708 709 710 711 712 713 714 715 716 717 718 719 720 721 722 723 724 725 726 727 728 729 730 731 732 733 734 735 736 737 738 739 740 741 742 743 744 745 746 747 748 749 750 751 752 753 754 755 756 757 758 759 760 761 762 763 764 765 766 767 768 769 770 771 772 773 774 775 776 777 778 779 780 781 782 783 784 785 786 787 788 789 790 791 792 793 794 795 796 797 798 799 800 801 802 803 804 805 806 807 808 809 810 811 812 813 814 815 816 817 818 819 820 821 822 823 824 825 826 827 828 829 830 831 832 833 834 835 836 837 838 839 840 841 842 843 844 845 846 847 848 849 850 851 852 853 854 855 856 857 858 859 860 861 862 863 864 865 866 867 868 869 870 871 872 873 874 875 876 877 878 879 880 881 882 883 884 885 886 887 888 889 890 891 892 893 894 895 896 897 898 899 900 901 902 903 904 905 906 907 908 909 910 911 912 913 914 915 916 917 918 919 920 921 922 923 924 925 926 927 928 929 930 931 932 933 934 935 936 937 938 939 940 941 942 943 944 945 946 947 948 949 950 951 952 953 954 955 956 957 958 959 960 961 962 963 964 965 966 967 968 969 970 971 972 973 974 975 976 977 978 979 980 981 982 983 984 985 986 987 988 989 990 991 992 993 994 995 996 997 998 999 1000 1001 1002 1003 1004 1005 1006 1007 1008 1009 1010 1011 1012 1013 1014 1015 1016 1017 1018 1019 1020 1021 1022 1023 1024 1025 1026 1027 1028 1029 1030 1031 1032 1033 1034 1035 1036 1037 1038 1039 1040 1041 1042 1043 1044 1045 1046 1047 1048 1049 1050 1051 1052 1053 1054 1055 1056 1057 1058 1059 1060 1061 1062 1063 1064 1065 1066 1067 1068 1069 1070 1071 1072 1073 1074 1075 1076 1077 1078 1079 1080 1081 1082 1083 1084 1085 1086 1087 1088 1089 1090 1091 1092 1093 1094 1095 1096 1097 1098 1099 1100 1101 1102 1103 1104 1105 1106 1107 1108 1109 1110 1111 1112 1113 1114 1115 1116 1117 1118 1119 1120 1121 1122 1123 1124 1125 1126 1127 1128 1129 1130 1131 1132 1133 1134 1135

/* Copyright 1999-2003 Red Hat, Inc.
 *
 * This software may be freely redistributed under the terms of the GNU
 * public license.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 *
 * probe serial port for PnP/Legacy devices
 */


#include <stdio.h>
#include <stdlib.h>
#include <fcntl.h>
#include <unistd.h>
#include <termios.h>
#include <errno.h>
#include <string.h>
#include <signal.h>
#include <time.h>
#include <libgen.h>
#include <sys/time.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <sys/ioctl.h>
#include <sys/sysmacros.h>

#include <asm/types.h>
#include <linux/serial.h>

#include "serial.h"
#include "kudzu.h"

/* character strings ARE null-terminated in the following structure    */
/* these elements are marked with a (string) in the comment            */
/* If PnP device sent 6 bit data stream, we've xlated by a 0x20 offset */
/* When computing checksum, must remove this offset                    */
struct pnp_com_id {
    unsigned char xlate_6bit;      /* does this contain xlated data */
    unsigned char other_id[17];    /* backward compatibility with pre-PNP */
    unsigned char other_len;       /* length of the other_id */
    unsigned char pnp_rev[2];      /* PnP revision bytes */
    unsigned char pnp_rev_str[8];  /* PnP revision (string version) */
    unsigned char eisa_id[4];      /* EISA Mfr identifier (string) */
    unsigned char product_id[5];   /* Mfr determined product ID (string) */
    unsigned char serial_number[9];/* Optional dev serial number (string) */
    unsigned char class_name[33];  /* Optional PnP Class name (string) */
    unsigned char driver_id[42];   /* Optional compat device IDs (string) */
    unsigned char user_name[42];   /* Optional verbose product descr (string)*/
    unsigned char checksum[2];     /* Optional checksum */
};

/* there are two possible bytes to signify the start of a PnP ID string */
#define BeginPnP1 0x28
#define BeginPnP2 0x08

/* Likewise, two possible stop bytes */
#define EndPnP1   0x29
#define EndPnP2   0x09

/* these chars indicate extensions to the base dev id exist */
#define ExtendPnP1 0x5c
#define ExtendPnP2 0x3c

#define PNP_COM_MAXLEN 256

/* results from initiating hardware probe of a hardware device */
#define PNP_COM_FATAL      1       /* system error, check errno  */
#define PNP_COM_FAIL       2       /* probe ok, but found nothing */
#define PNP_COM_OK         3       /* probe ok, we found it      */

/* types of devices we might find */
/* if PNP_COM_PNPDEV is NOT set, its a legacy device */
#define PNP_COM_MOUSE      1       /* its a mouse */
#define PNP_COM_MODEM      2       /* its a modem */
#define PNP_COM_OTHER      4       /* device is there, cant tell what kind */
#define PNP_COM_NOEXIST    8       /* no device seen */
#define PNP_COM_PNPDEV     512     /* its a PNP device */

static void serialFreeDevice(struct serialDevice *dev) {
	if (dev->pnpmfr) free(dev->pnpmfr);
	if (dev->pnpmodel) free(dev->pnpmodel);
	if (dev->pnpcompat) free(dev->pnpcompat);
	if (dev->pnpdesc) free(dev->pnpdesc);
        freeDevice((struct device *)dev);
}

static void serialWriteDevice(FILE *file, struct serialDevice *dev)
{
    writeDevice(file, (struct device *) dev);
    if (dev->pnpmfr)
	fprintf(file,"pnpmfr: %s\n",dev->pnpmfr);
    if (dev->pnpmodel)
	fprintf(file,"pnpmodel: %s\n",dev->pnpmodel);
    if (dev->pnpcompat)
	fprintf(file,"pnpcompat: %s\n",dev->pnpcompat);
    if (dev->pnpdesc)
	fprintf(file,"pnpdesc: %s\n",dev->pnpdesc);
}

static int serialCompareDevice( struct serialDevice *dev1, struct serialDevice *dev2)
{
    int x;
    
    x = compareDevice((struct device *)dev1, (struct device *)dev2);
    if (x && x!=2) return x;
    if (dev1->pnpmfr && dev2->pnpmfr && strcmp(dev1->pnpmfr,dev2->pnpmfr))
	return 1;
    if ((!dev1->pnpmfr || !dev2->pnpmfr) && (dev1->pnpmfr != dev2->pnpmfr))
	return 1;
    if (dev1->pnpmodel && dev2->pnpmodel && strcmp(dev1->pnpmodel,dev2->pnpmodel))
	return 1;
    if ((!dev1->pnpmodel || !dev2->pnpmodel) && (dev1->pnpmodel != dev2->pnpmodel))
	return 1;
    if (dev1->pnpcompat && dev2->pnpcompat && strcmp(dev1->pnpcompat,dev2->pnpcompat))
	return 1;
    if ((!dev1->pnpcompat || !dev2->pnpcompat) && (dev1->pnpcompat != dev2->pnpcompat))
	return 1;
    if (dev1->pnpdesc && dev2->pnpdesc && strcmp(dev1->pnpdesc,dev2->pnpdesc))
	return 1;
    if ((!dev1->pnpdesc || !dev2->pnpdesc) && (dev1->pnpdesc != dev2->pnpdesc))
	return 1;
    return x;
}


struct serialDevice * serialNewDevice(struct serialDevice *dev) {
    struct serialDevice *ret;
    
    ret = malloc(sizeof(struct serialDevice));
    memset(ret,'\0',sizeof(struct serialDevice));
    ret=(struct serialDevice *)newDevice((struct device *)dev,(struct device *)ret);
    ret->bus = BUS_SERIAL;
    ret->newDevice = serialNewDevice;
    ret->freeDevice = serialFreeDevice;
    ret->writeDevice = serialWriteDevice;
    ret->compareDevice = serialCompareDevice;
    if (dev && dev->bus == BUS_SERIAL) {
	if (dev->pnpmfr)
	    ret->pnpmfr=strdup(dev->pnpmfr);
	if (dev->pnpmodel)
	    ret->pnpmodel=strdup(dev->pnpmodel);
	if (dev->pnpcompat)
	    ret->pnpcompat=strdup(dev->pnpcompat);
	if (dev->pnpdesc)
	    ret->pnpdesc=strdup(dev->pnpdesc);
    }
    return ret;
}

/*
 * wait_input - wait until there is data available on fd,
 * for the length of time specified by *timo (indefinite
 * if timo is NULL).
 */

static int wait_for_input (int fd, struct timeval *timo) {
    fd_set ready;
    int n;
    
    FD_ZERO(&ready);
    FD_SET(fd, &ready);

    n = select(fd+1, &ready, NULL, &ready, timo);
    return n;
}

static int open_serial_port( char *port ) {
    int fd;

    DEBUG("opening serial port %s...", port);
    
    fd = open( port, O_RDWR | O_NONBLOCK);
    if (fd < 0) {
	DEBUG("failed.\n");
	return -1;
    } else {
	DEBUG("successful.\n");
    }
    
    /* reset file so it is no longer in non-blocking mode */
    if (fcntl(fd, F_SETFL, 0) < 0) {
	close(fd);
	DEBUG("Failed to set port to non-blocking mode\n");
	return -1;
    }
    
    return fd;
}

/* <0 means ioctl error occurred */    
static int get_serial_lines( int fd ) {
    int modem_lines;
    
    ioctl(fd, TIOCMGET, &modem_lines);
    return modem_lines;
}

/* <0 means ioctl error occurred */    
static int set_serial_lines( int fd, int modem_lines ) {
    return ioctl(fd, TIOCMSET, &modem_lines);
}

/* set serial port to 1200 baud, 'nbits' bits, 1 stop, no parity */
static int setup_serial_port( int fd, int nbits, struct termios *attr ) {

    DEBUG("setting up serial port\n");
    
    attr->c_iflag = IGNBRK | IGNPAR;
    attr->c_cflag = 0;
    attr->c_cflag &= ~(CSIZE | CSTOPB | PARENB | PARODD | PARENB);
    attr->c_cflag |=  CREAD | CLOCAL; /*| CRTSCTS ; */
    if (nbits == 7)
	attr->c_cflag |= CS7 | CSTOPB;
    else
	attr->c_cflag |= CS8;
    attr->c_oflag = 0;
    attr->c_lflag = 0;

    attr->c_cc[VMIN] = 1;
    attr->c_cc[VTIME] = 5;

    if (cfsetospeed( attr, B1200))
	return -1;
    if (cfsetispeed( attr, B1200))
	return -1;
    return tcsetattr(fd, TCSANOW, attr);
}

/* Initialize the serial port to a known state *before* probing. This is
 * apparently required for some Logitech mice, who will stubbornly refuse
 * to respond to PnP probes after they've been opened by gpm or XFree.
 */

static int init_port(int fd) {
    struct termios attr;
    
    if (tcgetattr(fd,&attr))
	return 1;
    
    cfsetospeed(&attr, B2400);
    cfsetispeed(&attr, B2400);
    attr.c_iflag = IXON | ICRNL;
    attr.c_cflag = CLOCAL | HUPCL | CREAD | B9600 | CS8;
    attr.c_oflag = 0;
    attr.c_lflag = 0;
    return tcsetattr(fd, TCSANOW, &attr);
}


/* Request for PnP info from serial device                      */
/* See page 6 of the pnpcom doc from Microsoft                  */
/* Return code tells us what happened                           */
/*                                                              */
/* PNP_COM_FATAL      - error, errno has reason                 */
/* PNP_COM_OK         - probe initiated successfully            */
static int init_pnp_com_seq1( int fd ) {
    int modem_lines;
    int temp;
    int dsr_status;
    int rc = PNP_COM_OK;
    struct termios portattr;

    DEBUG("initializing 1st PNP sequence\n");
    if (init_port(fd))
      return PNP_COM_FATAL;

    modem_lines = get_serial_lines(fd);

    /* COM port initialization, check for device enumerate */
    
    /* turn on DTR, turn off RTS */
    modem_lines |= TIOCM_DTR;
    modem_lines &= ~TIOCM_RTS;
    set_serial_lines(fd, modem_lines);

    /* wait 200ms for DSR=1 */
    usleep(200000);

    dsr_status = get_serial_lines(fd) & TIOCM_DSR;
    /* see if we got DSR coming up */

    if (!dsr_status) {
	DEBUG("Device did not set DSR\n");
    }

    /* COM port Setup, 1st phase */
    temp = tcgetattr(fd, &portattr);
    if (temp < 0) 
	return PNP_COM_FATAL;

    /* now we set port to be 1200 baud, 7 bits, no parity, 1 stop bit */
    temp = setup_serial_port( fd, 7, &portattr );
    if (temp < 0) 
	return PNP_COM_FATAL;

    /* we drop DTR and RTS */
    modem_lines &= ~( TIOCM_RTS | TIOCM_DTR);
    set_serial_lines(fd, modem_lines);
    usleep(200000);

    /* bring DTR back up */
    modem_lines |= TIOCM_DTR;
    set_serial_lines(fd, modem_lines);
    usleep(200000);

    /* Wait for response, 1st phase */
    modem_lines |= TIOCM_RTS;
    set_serial_lines(fd, modem_lines);
    /* usleep(200000); => AQ: not valid as we should look to receive data during this time!! */

    return rc;
}


/* Request for PnP info from serial device                      */
/* See page 6 of the pnpcom doc from Microsoft                  */
/* Always returns PNP_COM_OK                                    */
static int init_pnp_com_seq2( int fd ) {
    int modem_lines;
    int rc = PNP_COM_OK;

    DEBUG("initializing 2nd PNP sequence\n");

    modem_lines = get_serial_lines(fd);

    /* COM port setup, 2nd phase */
    /* turn off DTR and RTS */
    modem_lines &= ~(TIOCM_DTR | TIOCM_RTS);
    set_serial_lines(fd, modem_lines);
    usleep(200000);

    /* wait for response, 2nd phase */
    /* turn on DTR and RTS */
    modem_lines |= (TIOCM_DTR | TIOCM_RTS);
    set_serial_lines(fd, modem_lines);
    /* usleep(200000); => AQ: not valid as we should look to receive data during this time!! */
    
    return rc;
}


/* Request for PnP info from serial modem device                */
/* Uses ATI9 code, may not do anything but return 'ERROR'       */
/* Return code tells us what happened                           */
/*                                                              */
/* PNP_COM_FATAL      - error, errno has reason                 */
/* PNP_COM_OK         - probe initiated successfully            */
/* PNP_COM_FAIL       - DSR never came on - try alterntives     */
/*                          means (ATI9?) to get PnP string     */
static int init_pnp_com_ati9( int fd ) {
    int modem_lines;
    int temp;
    int done;
    int respindex;
    int starttime;
    unsigned char resp[100], buf[2];
    struct timeval timo;
    struct termios portattr;

    DEBUG("Querying ATI9 info from modem\n");
    modem_lines = get_serial_lines(fd);

    /* turn off RTS */
    modem_lines &= ~TIOCM_RTS;
    set_serial_lines(fd, modem_lines);

    /* wait 200ms for DSR=1 */
    usleep(200000);

    /* now we set port to be 1200 baud, 8 bits, no parity, 1 stop bit */
    temp = tcgetattr(fd, &portattr);
    if (temp < 0) {
	modem_lines |= TIOCM_DTR | TIOCM_RTS;
	set_serial_lines(fd, modem_lines);
	return PNP_COM_FATAL;
    }

    /* goto 1200 baud, 8 bits */
    temp = setup_serial_port( fd, 8, &portattr );
    if (temp < 0) {
	modem_lines |= TIOCM_DTR | TIOCM_RTS;
	set_serial_lines(fd, modem_lines);
	return PNP_COM_FATAL;
    }

    /* turn on DTR and RTS */
    modem_lines = get_serial_lines(fd);
    modem_lines |= TIOCM_RTS | TIOCM_DTR;
    set_serial_lines(fd, modem_lines);
    usleep(200000);

    /* send the 'AT' command */
    DEBUG("Sending ATI9 command to modem\n");
    
    write(fd, "ATI9\r", 5);
    
    /* start reading - read the AT command back */
    done     = 0;
    respindex= 0;
    starttime=time(NULL);
    memset(resp, 0, sizeof(resp));
    while (!done) {
	timo.tv_sec=0;
	timo.tv_usec=250000;
	if (wait_for_input(fd, &timo) > 0) {
	    temp = read( fd, buf, 1 );
	    if (temp < 0) {
		if (errno != EAGAIN)
		    return PNP_COM_FATAL;
	    } else {
		resp[respindex++] = buf[0];
		resp[respindex] = 0;
	    }
	} else
	    done = 1;

	/* shouldnt run more than 5 seconds */
	if (time(NULL)-starttime > 5 )
	    done = 1;

	if (respindex > 6)
	    done = 1;

	if (strstr(resp, "ATI9\r"))
	    done = 1;

	DEBUG("ATI9 probe ->%d \"%s\"\n",respindex, resp);
    }
    
    /* see if we saw the 'OK' response */
    if (strstr(resp, "("))
	return PNP_COM_OK;
    else
	return PNP_COM_FAIL;
    
    return PNP_COM_OK;
}

/* See if this is a legacy mouse device                         */
/* Only called if the PnP probe above failed                    */
/* We turn off the mouse via RS232 lines, then turn it on       */
/* If it spits out an 'M' character (at 1200 baud, 7N1)         */
/* it could be a mouse.                                         */
/*                                                              */
/* Return code tells us what happened                           */
/*                                                              */
/* PNP_COM_FATAL     - error, errno has reason                  */
/* PNP_COM_OK        - probe saw 'M'                            */
/* PNP_COM_FAIL      - Never saw the 'M' response               */

static int find_legacy_mouse( int fd ) {
    int modem_lines;
    int temp;
    int done;
    int starttime;
    unsigned char resp[2];
    struct timeval timo;
    struct termios portattr;

    DEBUG("looking for a legacy mouse\n");
    
    /* now we set port to be 1200 baud, 7 bits, no parity, 1 stop bit */
    temp = tcgetattr(fd, &portattr);
    if (temp < 0) 
	return PNP_COM_FATAL;

    /* goto 1200 baud, etc etc*/
    temp = setup_serial_port( fd, 7, &portattr );
    if (temp < 0) 
	return PNP_COM_FATAL;

    /* we drop DTR and RTS */
    modem_lines = get_serial_lines(fd);
    modem_lines &= ~( TIOCM_RTS | TIOCM_DTR);
    set_serial_lines(fd, modem_lines);
    usleep(200000);

    /* bring them DTR back up */
    modem_lines |= TIOCM_DTR | TIOCM_RTS;
    set_serial_lines(fd, modem_lines);

    /* start reading - after first character we quit */
    done     = 0;
    starttime=time(NULL);
    while (!done) {
	timo.tv_sec=0;
	timo.tv_usec=250000;
	if (wait_for_input(fd, &timo) > 0) {
	    temp = read( fd, resp, 1 );
	    if (temp < 0) {
		if (errno != EAGAIN)
		    return PNP_COM_FATAL;
	    } else {
		done = 1;
	    }
	} else
	    done = 1;


	/* shouldnt run more than 2 seconds */
	if (time(NULL)-starttime > 2 )
	    done = 1;
    }
    if (*resp == 'M') {
	DEBUG("Found legacy mouse\n");
	return PNP_COM_OK;
    } else
	return PNP_COM_FAIL;
}

/* See if this is a legacy modem device                         */
/* Only called if the PnP probe above failed                    */
/* We send a '!AT' and see if we get an 'OK' back               */
/*                                                              */
/* Return code tells us what happened                           */
/*                                                              */
/* PNP_COM_FATAL     - error, errno has reason                  */
/* PNP_COM_OK        - probe saw 'OK'                           */
/* PNP_COM_FAIL      - Never saw the 'OK' response              */
static int find_legacy_modem( int fd ) {
    int modem_lines;
    int temp;
    int done;
    int respindex;
    int starttime;
    unsigned char resp[10], buf[2];
    struct timeval timo;
    struct termios portattr;

    DEBUG("looking for a legacy modem\n");
    
    /* now we set port to be 1200 baud, 8 bits, no parity, 1 stop bit */
    temp = tcgetattr(fd, &portattr);
    if (temp < 0) 
	return PNP_COM_FATAL;

    /* goto 1200 baud, 8 bits */
    temp = setup_serial_port( fd, 8, &portattr );
    if (temp < 0) 
	return PNP_COM_FATAL;

    /* turn on DTR and RTS */
    modem_lines = get_serial_lines(fd);
    modem_lines |= TIOCM_RTS | TIOCM_DTR;
    set_serial_lines(fd, modem_lines);
    usleep(200000);

    /* send the 'AT' command */
    DEBUG("Sending AT command to modem\n");
    
    write(fd, "AT\r", 3);
    
    /* start reading - we'll get AT command back first, then modem response */
    done     = 0;
    respindex= 0;
    starttime=time(NULL);
    memset(resp, 0, sizeof(resp));
    while (!done) {
	timo.tv_sec=0;
	timo.tv_usec=250000;
	if (wait_for_input(fd, &timo) > 0) {
	    temp = read( fd, buf, 1 );
	    if (temp < 0) {
		if (errno != EAGAIN)
		    return PNP_COM_FATAL;
	    } else {
		resp[respindex++] = buf[0];
	    }
	} else
	    done = 1;

	/* shouldnt run more than 5 seconds */
	if (time(NULL)-starttime > 5 )
	    done = 1;

	if (respindex > 9)
	    done = 1;
    }
    
    /* see if we saw the 'OK' response */
    if (strstr(resp, "OK"))
	return PNP_COM_OK;
    else
	return PNP_COM_FAIL;
}

/* retrieve the PnP ID string */
/* timeout after 3 seconds   */
/* should probably set a 200 msec timeout per char, as spec says */
/* if no char received, we're done                              */
static int read_pnp_string( int fd, unsigned char *pnp_string, int *pnp_len, int pnp_stringbuf_size ) {
    int     pnp_index;
    int     temp, done, counter;
    int     seen_start;
    time_t  starttime;
    struct timeval timo;
    unsigned char buf[80];
    unsigned char end_char;

    DEBUG("Attempting to read PNP ID string\n");
    
    /* see if we have any input waiting */
    pnp_index  = 0;
    seen_start = 0;
    done       = 0;
    end_char   = 0;
    starttime=time(NULL);
    while (!done) {
	timo.tv_sec=0;
	timo.tv_usec=250000;
	if (wait_for_input(fd, &timo) > 0) {
	    temp = read( fd, buf, 1 );
	    if (temp < 0) {
		if (errno != EAGAIN)
		    return PNP_COM_FAIL;
	    } else {
		for (counter=0; counter < temp; counter++) {
		    pnp_string[pnp_index++] = buf[counter];
		    if (seen_start) {
			if (buf[counter] == end_char) {
			    done=1;
			    break;
			}
		    } else {
			if (buf[counter] == BeginPnP1) {
			    seen_start = 1;
			    end_char   = EndPnP1;
			} else if (buf[counter] == BeginPnP2) {
			    seen_start = 1;
			    end_char   = EndPnP2;
			}
		    }
		}
	    }
	} else
	    done = 1;
	
	/* shouldnt run more than 3 seconds */
	if (time(NULL)-starttime > 3 )
	    done = 1;

	if (pnp_index >= pnp_stringbuf_size)
	    done = 1;
    }
    pnp_string[pnp_index] = 0;
    *pnp_len=pnp_index;
    if(*pnp_len > 0)
        return PNP_COM_OK;
    else /* allows to call seq2 to be conformant */
	return PNP_COM_FAIL;
}

/* parse the PnP ID string into components */
static int parse_pnp_string( unsigned char *pnp_id_string, int pnp_len,
		     struct pnp_com_id *pnp_id ) {
    unsigned char *p1, *p2;
    unsigned char *start;
    unsigned char *end;
    unsigned char *curpos;
    unsigned char *endfield;
    unsigned char *temppos;
    unsigned char *pnp_string;
    unsigned char end_char;

    int no_more_extensions=0;
    int stage;
    int len;
    unsigned short int checksum;
    char hex_checksum[5];

    char extension_delims[] = {EndPnP1, EndPnP2, ExtendPnP1, ExtendPnP2, 0};
    char end_delims[] = {EndPnP1, EndPnP2, 0};
    unsigned char* p1end = NULL;
    unsigned char* p2end = NULL;

    /* clear out pnp_id */
    memset(pnp_id, 0, sizeof(*pnp_id));

    /* copy pnp_string to temp space */
    pnp_string = alloca(pnp_len+1);
    memcpy(pnp_string, pnp_id_string, pnp_len+1);
    
    /* first find the start of the PnP part of string */
    p1 = memchr( pnp_string, BeginPnP1, pnp_len );
    p2 = memchr( pnp_string, BeginPnP2, pnp_len );


    if (p1) {
        int p_len = pnp_len - (p1 - pnp_string);
        p1end = memchr(p1, EndPnP1, p_len);
    }
    if (p2) {
        int p_len = pnp_len - (p2 - pnp_string);
        p2end = memchr(p2, EndPnP2, p_len);
    }

    /* use the one which points nearest to start of the string */
    /* and is actually defined                                */
    if ( p1 && p1end && p2 && p2end ) {
	start = (p1 < p2) ? p1 : p2;
    } else if ( p1 && p1end )
	start = p1;
    else if ( p2 && p2end )
	start = p2;
    else
	start = NULL;

    /* if no start then we're done */
    if (!start)
	return -1;
    
    /* the length of the initial part cannot be more than 17 bytes */
    if ((start - pnp_string) > 17)
	return -1;

    /* setup end character we are looking for based on the start character */
    if (start == p2) {
      pnp_id->xlate_6bit = 1;
      end_char = EndPnP2;
      /* we need to xlate data in PnP fields */
      /* remember to skip the revision fields (bytes 1 and 2 after start) */
      temppos=start;
      while (1) {
	  if (*temppos == EndPnP2) {
	     *temppos += 0x20;
	      break;
	  } else if (temppos != start+1 && temppos != start+2 )
	     *temppos += 0x20;
	  
	  temppos++;
      }	      
    } else {
      pnp_id->xlate_6bit = 0;
      end_char = EndPnP1;
    }
    
    /* move everything before the start of the PnP block */
    memcpy(pnp_id->other_id, pnp_string, start-pnp_string);
    pnp_id->other_len = start - pnp_string;

    /* now we get the PnP fields - all were zero'd out above */
    curpos = start+1;
    memcpy(pnp_id->pnp_rev,curpos,2);       curpos += 2;
    memcpy(pnp_id->eisa_id,curpos,3);       curpos += 3;
    memcpy(pnp_id->product_id,curpos,4);    curpos += 4;
    /* now we see if have extension fields */
    no_more_extensions = 0;
    stage = 0;
    while (!no_more_extensions) {
	if (*curpos == ExtendPnP1 || *curpos == ExtendPnP2) {
	    curpos++;
	    endfield = strpbrk(curpos, extension_delims);
	    if (!endfield)
		return -1;
	    /* if we reached the end of all PnP data, back off */
	    /* cause there is a checksum at the end of extension data */
	    if (*endfield == EndPnP1 || *endfield == EndPnP2)
		endfield -= 2;
	} else
	    break;

	len = endfield - curpos;
	switch (stage) {
	  case 0:
	    if (len != 8 && len != 0 )
		return -1;
	    
	    memcpy(pnp_id->serial_number,curpos,len);
	    curpos += len;
	    break;

	  case 1:
	    if (len > 33)
		return -1;
	    memcpy(pnp_id->class_name, curpos, len);
	    curpos = endfield;
	    break;

	  case 2:
	    if (len > 41)
		return -1;
	    memcpy(pnp_id->driver_id, curpos, len);
	    curpos = endfield;
	    break;

	  case 3:
	    if (len > 41)
		return -1;
	    memcpy(pnp_id->user_name, curpos, len);
	    curpos = endfield;
	    break;
	}
	stage++;
    }

    /* now find the end of all PnP data */
    end = strpbrk(curpos, end_delims);
    if (!end)
	return -1;
    
    /* if we had any extensions, we expect an checksum */
    if (stage != 0) {
	/* copy checksum into struct */
	memcpy(pnp_id->checksum, curpos, 2);
	
	/* compute the checksum as the sum of all PnP bytes, excluding */
	/* the two byte checksum. */
	checksum = 0;
	for (temppos=start; temppos <= end; temppos++) {
	    /* skip checksum in calculation */
	    if (temppos == (end-2) || temppos == (end-1))
		continue;
	    /* dont xlate the revision at start */
	    if (temppos != (start+1) && temppos != (start+2))
		checksum += *temppos - ((pnp_id->xlate_6bit) ? 0x20 : 0);
	    else
		checksum += *temppos;
	}
	sprintf(hex_checksum, "%.2X", checksum & 0xff);
	if (strncmp(hex_checksum, pnp_id->checksum, 2))
	    return -1;
    }

    /* checksum was ok, so we're done */
    return 0;
}

static int attempt_pnp_retrieve(int fd, char *pnp_string, int *pnp_strlen, int pnp_stringbuf_size) {
    int pnp_probe_status;
    struct pnp_com_id pnp_id;
    int tried_at_prodding=0, give_up=0;
    
    DEBUG("Attempting PNP information retrieval\n");

    while (!give_up) {
	pnp_probe_status = init_pnp_com_seq1(fd);
	if (pnp_probe_status == PNP_COM_FATAL)
	    return PNP_COM_FATAL;
	pnp_probe_status = read_pnp_string(fd, pnp_string, pnp_strlen,
					   pnp_stringbuf_size);
	if (pnp_probe_status == PNP_COM_FAIL) {
	    init_pnp_com_seq2(fd);	    /* always succeeds */

	    pnp_probe_status = read_pnp_string(fd, pnp_string, pnp_strlen,
					       pnp_stringbuf_size);
	}

	if (*pnp_strlen == 1 && pnp_string[0] == 'M') /* legacy mouse */
	    return PNP_COM_OK;
	/* see if we got anything useful, if not try AT command */
	/* to prod device into correct serial params */
	if (parse_pnp_string( pnp_string, *pnp_strlen, &pnp_id )<0) {
	    DEBUG("That failed.\n");
	    if (!tried_at_prodding) {
		DEBUG("Prod modem with AT command.\n");
		write(fd, "AT\r", 3);
		tried_at_prodding=1;
	    } else
		give_up = 1;
	} else
	    return PNP_COM_OK;
    }   

    /* normal PNP detection has failed. */
    /* try sending a ATI9 code to the modem to see if we get PnP id back */
    init_pnp_com_ati9(fd);
    read_pnp_string(fd, pnp_string, pnp_strlen, pnp_stringbuf_size );
    if (parse_pnp_string( pnp_string, *pnp_strlen, &pnp_id )<0) {
	*pnp_strlen = 0;
	pnp_string[0] = 0;
	return PNP_COM_FAIL;
    } else
	return PNP_COM_OK;
}

struct device *serialProbe(enum deviceClass probeClass, int probeFlags,
			   struct device *devlist) {
    int fd;
    int temp;
    int pnp_strlen;
    int devicetype=-1;
    unsigned char pnp_string[100];
    char port[20];
    struct termios origattr;
    struct pnp_com_id pnp_id;
    struct serialDevice *serdev;
    struct stat sb;
    int maj, twelve=12;
    int console=-1;
    int stdin_line=-1;
    struct serial_struct si;

    DEBUG("Probing for serial ports\n");
    
    if (probeFlags & PROBE_SAFE) return devlist;

    /* Are we on a serial console? */
    fstat(0,&sb);
    maj = major(sb.st_rdev);
    if (maj != 4 && (maj < 136 || maj > 143)) {
	if (ioctl (0, TIOCLINUX, &twelve) < 0) {
	    if (ioctl (0, TIOCGSERIAL, &si) >= 0) {
		if (si.line > 0) {
		    stdin_line = 1 << si.line;
		} else {
		    stdin_line = 0;
		}
	    } else stdin_line = 0;
	}
    }
	
    fd=open("/dev/console",O_RDWR);
    if (fd != -1) {
	fstat(fd,&sb);
	maj = major(sb.st_rdev);
	if (maj != 4 && (maj < 136 || maj > 143)) {
	    if (ioctl (fd, TIOCLINUX, &twelve) < 0) {
			#ifdef __powerpc__
			// we could have gotten an error for another reason - like EINVAL
			// skipping ttyS0 on PPC - which is where most modems reside
			if (errno == ENOTTY) {
			#endif
		if (ioctl (fd, TIOCGSERIAL, &si) >= 0) {
		    if (si.line > 0) {
			console = 1 << si.line;
		    } else {
			console = 0;
			#ifdef __powerpc__
			}
			#endif 
		    }
		} else console = 0;
	    }
	}
	close(fd);
    }
    
    
    if (
	(probeClass & CLASS_UNSPEC) ||
	(probeClass & CLASS_OTHER) ||
	(probeClass & CLASS_MOUSE) ||
	(probeClass & CLASS_MODEM) ||
	(probeClass & CLASS_PRINTER)
	) {
	int x;
	
	for (x=0; x<=3 ; x++) {
	    struct stat sbuf;
	    char lockfile[32];
	    if (x==console || x==stdin_line) continue;
	    snprintf(port,20,"/dev/ttyS%d",x);

	    /* Make sure it's not in use */
	    snprintf(lockfile,32,"/var/lock/LCK..ttyS%d",x);
	    if (!stat(lockfile,&sbuf)) {
		DEBUG("Port %s in use, skipping probe.\n",
		      port);
		continue;
	    }
	    memset(lockfile,'\0',32);
	    if (readlink("/dev/modem",lockfile,32)>0) {
		    if (!strcmp(basename(port),basename(lockfile))) {
			snprintf(lockfile,32,"/var/lock/LCK..modem");
			if (!stat(lockfile,&sbuf)) {
			    DEBUG("Port %s in use, skipping probe.\n",
				  port);
			    continue;
			}
		    }
	    }
	    
	    if ((fd=open_serial_port(port)) < 0) {
		continue;
	    }
	    /* save the current state of the port */
	    temp = tcgetattr(fd, &origattr);
	    if (temp < 0) {
		DEBUG("unable to retrieve port attributes...no port present?\n");
		close(fd);
		continue;
	    }
	    

	    /* try twiddling RS232 control lines and see if it talks to us */
	    devicetype=-1;
	    pnp_strlen = 0;
	    if (attempt_pnp_retrieve( fd, pnp_string, &pnp_strlen,
				      sizeof(pnp_string) - 1 ) == PNP_COM_FATAL)
		goto endprobe;
	    
	    /* see if we found any PnP signature */
	    if (pnp_strlen != 0) {
		/* fill in the PnP com structure */
		if (parse_pnp_string( pnp_string, pnp_strlen, &pnp_id )<0) {
		    DEBUG("Got PNP data back, but failed to parse.  Aborting\n");
		    goto endprobe;
		} else {
		    char *foo;
		    int len;

		    DEBUG("PNP data parsed.\n");
		    serdev = serialNewDevice(NULL);

		    if (pnp_id.user_name[0]) {
			serdev->pnpdesc = strdup(pnp_id.user_name);
			len = strlen(pnp_id.eisa_id) +
			    strlen(pnp_id.product_id) +
			    strlen(pnp_id.user_name) + 3;
			foo = malloc(len);
			snprintf(foo,len,"%s|%s %s",pnp_id.eisa_id,
				 pnp_id.product_id,pnp_id.user_name);
		    } else {
			len = strlen(pnp_id.eisa_id) +
			    strlen(pnp_id.product_id) + 3;
			foo = malloc(len);
			snprintf(foo,len,"%s|%s",pnp_id.eisa_id,
				 pnp_id.product_id);
		    }
		    if (serdev->desc) free(serdev->desc);		    
		    serdev->desc=strdup(foo);
		    serdev->device=strdup(port+5);
		    if (serdev->driver) free(serdev->driver);
		    serdev->driver=strdup("ignore");
		    serdev->pnpmfr = strdup(pnp_id.eisa_id);
		    serdev->pnpmodel = strdup(pnp_id.product_id);
			
		    free(foo);
		    foo=pnp_id.product_id;
		    if (pnp_id.driver_id) {
			if (strstr(pnp_id.driver_id,"PNP"))
			  foo = strstr(pnp_id.driver_id,"PNP")+3;
			    serdev->pnpcompat = strdup(pnp_id.driver_id);
		    }

		    if (*pnp_id.other_id == 'M' ||
			!strncmp(pnp_id.class_name, "MOUSE", 5) ||
			!strncmp(foo, "0F", 2)) {
			serdev->type = CLASS_MOUSE;
			if (!strncmp(serdev->desc, "|", 1)) {
			    free(serdev->desc);
			    serdev->desc=strdup("Generic Serial Mouse");
			}
			if (serdev->driver) free(serdev->driver);
			serdev->driver = strdup("generic");
		    }
		    else if (!strncmp(pnp_id.class_name, "MODEM", 5) ||
			     !strncmp(foo, "C", 1))
			serdev->type = CLASS_MODEM;
		    else if (!strncmp(pnp_id.class_name, "PRINTER", 7))
			serdev->type = CLASS_PRINTER;
		    else
			serdev->type = CLASS_OTHER;
		    if (serdev->type & probeClass) {
			if (devlist)
			    serdev->next = devlist;
			devlist = (struct device *)serdev;
			if (probeFlags & PROBE_ONE) {
			    tcsetattr(fd, TCSANOW, &origattr);
			    tcflush(fd, TCIOFLUSH);
			    close(fd);
			    return devlist;
			}
		    } else {
			serdev->freeDevice(serdev);
		    }
		    goto endprobe;
		}
	    } else {
		DEBUG("No PNP data received.\n");
		/* try to find a legacy device */

		temp = find_legacy_mouse(fd);
		if (temp == PNP_COM_FATAL) {
			goto endprobe;
		} else if (temp == PNP_COM_OK) {
		    if (probeClass & CLASS_MOUSE) {
			serdev=serialNewDevice(NULL);
			serdev->type = CLASS_MOUSE;
			serdev->device = strdup(port+5);
			serdev->driver= strdup("generic");
			serdev->desc = strdup("Generic Serial Mouse");
			if (devlist)
			    serdev->next = devlist;
			devlist = (struct device *)serdev;
			if (probeFlags & PROBE_ONE) {
			    tcsetattr(fd, TCSANOW, &origattr);
			    tcflush(fd, TCIOFLUSH);
			    close(fd);
			    return devlist;
			}
		    }
		    goto endprobe;
		} else {
		    DEBUG("Didn't see a legacy mouse.\n");
		    
		    temp = find_legacy_modem(fd);
		    if (temp == PNP_COM_FATAL) {
			goto endprobe;
		    } else if (temp == PNP_COM_OK) {
			DEBUG("Legacy modem signature seen.\n");
			if (probeClass & CLASS_MODEM) {
			    serdev=serialNewDevice(NULL);
			    serdev->type = CLASS_MODEM;
			    serdev->device = strdup(port+5);
			    serdev->driver= strdup("ignore");
			    serdev->desc = strdup("Generic Serial Modem");
			    if (devlist)
				serdev->next = devlist;
			    devlist = (struct device *)serdev;
			    if (probeFlags & PROBE_ONE) {
				tcsetattr(fd, TCSANOW, &origattr);
				tcflush(fd, TCIOFLUSH);
				close(fd);
				return devlist;
			    }
			}
			goto endprobe;
		    } else {
			DEBUG("Didnt see a legacy modem, game over.\n");
		    }
		}
	    }
	endprobe:
	    DEBUG("Restoring original port attributes\n");
	    tcsetattr(fd, TCSANOW, &origattr);
	    tcflush(fd, TCIOFLUSH);
	    close(fd);
	}
    }
    return devlist;
}


context:
space:
mode: