summaryrefslogtreecommitdiffstats
path: root/perl-install
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install')
-rw-r--r--perl-install/printer/printerdrake.pm75
1 files changed, 36 insertions, 39 deletions
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index bb1f4887b..e362e81d7 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -57,7 +57,6 @@ sub config_cups {
# $in->set_help('configureRemoteCUPSServer') if $::isInstall;
#- hack to handle cups remote server printing,
#- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port
- my ($server, $port, $autoconf);
# Return value: 0 when nothing was changed ("Apply" never pressed), 1
# when "Apply" was at least pressed once.
my $retvalue = 0;
@@ -598,7 +597,7 @@ sub first_time_dialog {
}
sub configure_new_printers {
- my ($printer, $in, $upNetwork) = @_;
+ my ($printer, $in, $_upNetwork) = @_;
# This procedure auto-detects local printers and checks whether
# there is already a queue for them. If there is no queue for an
@@ -610,7 +609,7 @@ sub configure_new_printers {
return 1 if $::expert;
# Wait message
- my $_w = $in->wait_message(N("Printerdrake"),
+ my $w = $in->wait_message(N("Printerdrake"),
N("Searching for new printers..."));
# When HPOJ is running, it blocks the printer ports on which it is
@@ -691,8 +690,8 @@ sub configure_new_printers {
$queue .= $i;
}
$printer->{currentqueue}{queue} = $queue;
- undef $_w;
- $_w = $in->wait_message(N("Printerdrake"),
+ undef $w;
+ $w = $in->wait_message(N("Printerdrake"),
($unknown ?
N("Configuring printer ...") :
N("Configuring printer \"%s\"...",
@@ -719,7 +718,7 @@ sub configure_new_printers {
$p->{val}{DESCRIPTION} . N(" on ")) .
$p->{port} . N(")");
# Remove wait message
- undef $_w;
+ undef $w;
# Choose the printer/driver from the list
$printer->{DBENTRY} =
$in->ask_from_treelist(N("Printer model selection"),
@@ -748,7 +747,7 @@ Printerdrake could not determine which model your printer %s is. Please choose t
$printer->{QUEUE} = $printer->{currentqueue}{queue};
}
# Restore wait message
- $_w = $in->wait_message(N("Printerdrake"),
+ $w = $in->wait_message(N("Printerdrake"),
N("Configuring printer \"%s\"...",
$printer->{currentqueue}{queue}));
}
@@ -771,13 +770,13 @@ Printerdrake could not determine which model your printer %s is. Please choose t
$printer->{complete} = 0;
}
# Configure the current printer queues in applications
- undef $_w;
+ undef $w;
if ($configapps) {
- $_w =
+ $w =
$in->wait_message(N("Printerdrake"),
N("Configuring applications..."));
printer::main::configureapplications($printer);
- undef $_w;
+ undef $w;
}
undef $printer->{noninteractive};
}
@@ -1013,7 +1012,6 @@ sub setup_local_autoscan {
my $menuchoice = "";
my $oldmenuchoice = "";
my $device;
- my $p;
if ($printer->{configured}{$queue}) {
my $p = printer::main::autodetectionentry_for_uri
($printer->{currentqueue}{connect}, @autodetected);
@@ -1266,11 +1264,12 @@ sub setup_smb {
}
my $_w = $in->wait_message(N("Printer auto-detection"), N("Scanning network..."));
@autodetected = printer::detect::net_smb_detect();
+ my ($server, $share);
foreach my $p (@autodetected) {
my $menustr;
if ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) {
- my $server = $1;
- my $share = $2;
+ $server = $1;
+ $share = $2;
}
if ($p->{val}{DESCRIPTION}) {
$menustr = $p->{val}{DESCRIPTION};
@@ -1505,11 +1504,12 @@ sub setup_socket {
$autodetect = 1;
my $_w = $in->wait_message(N("Printer auto-detection"), N("Scanning network..."));
@autodetected = printer::detect::net_detect();
+ my ($host, $port);
foreach my $p (@autodetected) {
my $menustr;
if ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) {
- my $host = $1;
- my $port = $2;
+ $host = $1;
+ $port = $2;
}
if ($p->{val}{DESCRIPTION}) {
$menustr = $p->{val}{DESCRIPTION};
@@ -1763,7 +1763,7 @@ sub setup_common {
my $ptaldevice = "";
my $isHPOJ = 0;
- my $_w;
+ my $w;
if ($device =~ m!^/dev/! || $device =~ m!^socket://!) {
# Ask user whether he has a multi-function device when he didn't
# do auto-detection or when auto-detection failed
@@ -1785,14 +1785,14 @@ sub setup_common {
!files_exist(qw(/usr/sbin/ptal-mlcd
/usr/sbin/ptal-init
/usr/bin/xojpanel))) {
- $_w = $in->wait_message(N("Printerdrake"),
+ $w = $in->wait_message(N("Printerdrake"),
N("Installing HPOJ package..."))
if !$printer->{noninteractive};
$in->do_pkgs->install('hpoj', 'xojpanel');
}
# Configure and start HPOJ
- undef $_w;
- $_w = $in->wait_message
+ undef $w;
+ $w = $in->wait_message
(N("Printerdrake"),
N("Checking device and configuring HPOJ..."))
if !$printer->{noninteractive};
@@ -1812,8 +1812,8 @@ sub setup_common {
/usr/lib/libsane-hpoj.so.1),
if_(files_exist('/usr/bin/gimp'),
'/usr/bin/xsane-gimp'))) {
- undef $_w;
- $_w = $in->wait_message
+ undef $w;
+ $w = $in->wait_message
(N("Printerdrake"),
N("Installing SANE packages..."))
if !$printer->{noninteractive};
@@ -1838,8 +1838,8 @@ sub setup_common {
/usr/bin/mcopy
/usr/bin/MToolsFM
))) {
- undef $_w;
- $_w = $in->wait_message
+ undef $w;
+ $w = $in->wait_message
(N("Printerdrake"),
N("Installing mtools packages..."))
if !$printer->{noninteractive};
@@ -1854,7 +1854,7 @@ sub setup_common {
# Inform user about how to scan with his MF device
$text = scanner_help($makemodel, "ptal:/$ptaldevice");
if ($text) {
- undef $_w;
+ undef $w;
$in->ask_warn
(N("Scanning on your HP multi-function device"),
$text);
@@ -1863,7 +1863,7 @@ sub setup_common {
# MF device
$text = photocard_help($makemodel, "ptal:/$ptaldevice");
if ($text) {
- undef $_w;
+ undef $w;
$in->ask_warn(N("Photo memory card access on your HP multi-function device"),
$text);
}
@@ -1874,10 +1874,10 @@ sub setup_common {
# make the DeviceURI from $device.
$printer->{currentqueue}{connect} = $device;
}
- $_w = $in->wait_message
+ $w = $in->wait_message
(N("Printerdrake"),
N("Checking device and configuring HPOJ..."))
- if !$printer->{noninteractive} && !defined($_w);
+ if !$printer->{noninteractive} && !defined($w);
} else {
# make the DeviceURI from $device.
$printer->{currentqueue}{connect} = $device;
@@ -1966,7 +1966,7 @@ sub setup_common {
if ($printer::main::thedb{$entry}{make} =~ /Generic/i) {
# Database entry for generic printer, check printer
# languages (command set)
- my $cmd = $printer::main::thedb{$entry}{devidcmd};
+ my $_cmd = $printer::main::thedb{$entry}{devidcmd};
if ($printer::main::thedb{$entry}{model} =~
m!PCL\s*5/5e!i) {
# Generic PCL 5/5e Printer
@@ -2609,7 +2609,7 @@ You should make sure that the page size and the ink type/printing mode (if avail
@simple_options)) ? 1 : 0);
# Group header
if ($printer->{ARGS}[$i]{group} ne $oldgroup[$advanced]) {
- my $level = $#{$printer->{ARGS}[$i]{grouptrans}};
+ my $_level = $#{$printer->{ARGS}[$i]{grouptrans}};
$oldgroup[$advanced] = $printer->{ARGS}[$i]{group};
if ($printer->{ARGS}[$i]{group}) {
push(@widgets,
@@ -3167,7 +3167,7 @@ sub start_network {
} else { return printer::services::start("network") }
}
-sub network_configured {
+sub network_configured() {
# Do configured networks (/etc/sysconfig/network-scripts/ifcfg*) exist?
my @netscripts =
cat_("ls -1 $::prefix/etc/sysconfig/network-scripts/ |");
@@ -3209,10 +3209,9 @@ sub check_network {
require network::netconnect;
network::netconnect::main(
$in->{prefix}, $in->{netcnx} ||= {},
- $in->{netc}, $in->{mouse}, $in,
- $in->{intf}, 0,
- $in->{lang} eq "fr_FR" &&
- $in->{keyboard}{KEYBOARD} eq "fr", 0);
+ $in, $in->{netc}, $in->{mouse},
+ $in->{intf});
+# my ($prefix, $netcnx, $in, $o_netc, $o_mouse, $o_intf, $o_first_time, $o_noauto) = @_;
} else {
system("/usr/sbin/drakconnect");
}
@@ -3459,7 +3458,6 @@ sub setup_default_spooler {
$in->wait_message(N("Printerdrake"),
N("Configuring applications..."));
printer::main::configureapplications($printer);
- undef $_w;
}
# Save spooler choice
printer::default::set_spooler($printer);
@@ -3583,11 +3581,11 @@ sub main {
}
# Configure the current printer queues in applications
- my $_w =
+ my $w =
$in->wait_message(N("Printerdrake"),
N("Configuring applications..."));
printer::main::configureapplications($printer);
- undef $_w;
+ undef $w;
# Mark this part as done, it should not be done a second time.
if ($::isInstall) {
@@ -3796,7 +3794,7 @@ sub main {
$printer->{NEW} = 1;
#- Set default values for a new queue
$printer_type_inv{$printer->{TYPE}} or
- $printer->{TYPE} = printer::default::printer_type($printer);
+ $printer->{TYPE} = printer::default::printer_type();
$printer->{currentqueue} = { queue => $queue,
foomatic => 0,
desc => "",
@@ -4121,7 +4119,6 @@ What do you want to modify on this printer?",
my $_w = $in->wait_message(N("Printerdrake"),
N("Configuring applications..."));
printer::main::configureapplications($printer);
- undef $_w;
}
# Delete some variables
foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)) {