1 files changed, 104 insertions, 0 deletions
diff --git a/perl-install/unused/scsi.pm b/perl-install/unused/scsi.pm
new file mode 100644
index 000000000..77fe8fe44
--- /dev/null
+++ b/perl-install/unused/scsi.pm
@@ -0,0 +1,104 @@
+use diagnostics;
+use strict;
+
+my $scsiDeviceAvailable;
+my $CSADeviceAvailable;
+
+1;
+
+sub scsiDeviceAvailable {
+    defined $scsiDeviceAvailable and return $scsiDeviceAvailable;
+    local *F;
+    open F, "/proc/scsi/scsi" or log::l("failed to open /proc/scsi/scsi: $!"), return 0;
+    foreach (<F>) {
+	/devices: none/ and log::l("no scsi devices are available"), return $scsiDeviceAvailable = 0;
+    }
+    log::l("scsi devices are available");
+    $scsiDeviceAvailable = 1;
+}
+
+sub CompaqSmartArrayDeviceAvailable {
+    defined $CSADeviceAvailable and return $CSADeviceAvailable;
+    -r "/proc/array/ida0" or log::l("failed to open /proc/array/ida0: $!"), return $CSADeviceAvailable = 0;
+    log::l("Compaq Smart Array controllers available");
+    $CSADeviceAvailable = 1;
+}
+
+sub scsiGetDevices {
+    my @drives;
+    my ($driveNum, $cdromNum, $tapeNum) = qw(0 0 0);
+    my $err = sub { chop; log::l("unexpected line in /proc/scsi/scsi: $_"); error() };
+    local $_;
+
+    local *F;
+    open F, "/proc/scsi/scsi" or return &$err();
+    $_ = <F>; /^Attached devices:/ or return &$err();
+    while ($_ = <F>) {
+	my ($id) = /^Host:.*?Id: (\d+)/ or return &$err();
+	$_ = <F>; my ($vendor, $model) = /^\s*Vendor:\s*(.*?)\s+Model:\s*(.*?)\s+Rev:/ or return &$err();
+	$_ = <F>; my ($type) = /^\s*Type:\s*(.*)/ or &$err();
+	my $device;
+	if ($type =~ /Direct-Access/) {
+	    $type = 'hd';
+	    $device = "sd" . chr($driveNum++ + ord('a'));
+	} elsif ($type =~ /Sequential-Access/) {
+	    $type = 'tape';
+	    $device = "st" . $tapeNum++;
+	} elsif ($type =~ /CD-ROM/) {
+	    $type = 'cdrom';
+	    $device = "scd" . $cdromNum++;
+	}
+	$device and push @drives, { device => $device, type => $type, info => "$vendor $model", id => $id, bus => 0 };
+    }
+    [ @drives ];
+}
+
+sub ideGetDevices {
+    my @idi;
+
+    -r "/proc/ide" or die "sorry, /proc/ide not available, seems like you have a pre-2.2 kernel\n => not handled yet :(";
+
+    # Great. 2.2 kernel, things are much easier and less error prone. 
+    foreach my $d (glob_('/proc/ide/hd*')) {
+	my ($t) = chop_(cat_("$d/media"));
+	my $type = $ {{disk => 'hd', cdrom => 'cdrom', tape => 'tape', floppy => 'fd'}}{$t} or next;
+	my ($info) = chop_(cat_("$d/model")); $info ||= "(none)";
+
+	my $num = ord (($d =~ /(.)$/)[0]) - ord 'a';
+	push @idi, { type => $type, device => basename($d), info => $info, bus => $num/2, id => $num%2 };
+    }
+    [ @idi ];
+}
+
+
+sub CompaqSmartArrayGetDevices {
+    my @idi;
+    my $f;
+
+    for (my $i = 0; -r ($f = "/proc/array/ida$i"); $i++) {
+	local *F;
+	open F, $f or die;
+	local $_ = <F>;
+	my ($name) = m|ida/(.*?):| or next;
+	push @idi, { device => $name, info => "Compaq RAID logical disk", type => 'hd' };
+    }
+    [ @idi ];
+}
+
+sub dac960GetDevices {
+    my @idi;
+    my $file = "/var/log/dmesg";
+    -r $file or $file = "/tmp/syslog";
+
+    local *F;
+    open F, $file or die "Failed to open $file: $!";
+
+    # We are looking for lines of this format:DAC960#0:
+    # /dev/rd/c0d0: RAID-7, Online, 17928192 blocks, Write Thru0123456790123456789012    
+    foreach (<F>) {
+	my ($devicename, $info) = m|/dev/rd/(.*?): (.*?),| or next;
+	push @idi, { info => $info, type => 'hd', devicename => $devicename }; 
+	log::l("DAC960: $devicename: $info");
+    }
+    [ @idi ];
+}