diff options
Diffstat (limited to 'perl-install/standalone')
| -rwxr-xr-x | perl-install/standalone/drakgw | 379 |
1 files changed, 379 insertions, 0 deletions
diff --git a/perl-install/standalone/drakgw b/perl-install/standalone/drakgw new file mode 100755 index 000000000..2ebd926db --- /dev/null +++ b/perl-install/standalone/drakgw @@ -0,0 +1,379 @@ +#!/usr/bin/perl + +# +# Guillaume Cottenceau (gc@mandrakesoft.com) +# +# Copyright 2000 MandrakeSoft +# +# This software may be freely redistributed under the terms of the GNU +# public license. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# + +$drakgw_version = "0.9.0"; + +use lib qw(/usr/lib/libDrakX); + +use common qw(:system :file); +use interactive; +use log; +use c; + +local $_ = join '', @ARGV; + +/-h/ and die "usage: drakgw [--expert]\n"; + +$::expert = /-expert/ || cat_("/etc/sysconfig/system") =~ /^TYPE="?expert/m; #" +$::isStandalone = 1; + +my $in = vnew interactive('su'); + + +#- ********************************** +#- * 1st step: detect/setup + +$in->ask_okcancel(_("Internet Connection Sharing"), + _("Your computer can be configured so that its Internet connection shall be shared ". + "with other computers.\n". + "Note: you need a dedicated Network Adapter to set up a Local Area Network (LAN).\n\n". + "Would you like to setup the Internet Connection Sharing?"), 1) or $in->exit(0); + +#my @pci_ethernet_cards; +#require pci_probing::main; +#($_->[0] =~ /NETWORK_ETHERNET/) and (push @pci_ethernet_cards, $_) foreach (pci_probing::main::probe('.')); + +#($#pci_ethernet_cards == -1) and $in->ask_warn('', _("No PCI network ethernet devices found!")) and $in->exit(0); +# +## push @pci_ethernet_cards, [ "NETWORK_ETHERNET", "Fake ne2000", "ne2k" ]; +# +#my @configured_devices = map { /ifcfg-(\S+)/; $1 } `ls /etc/sysconfig/network-scripts/ifcfg*`; +# +#my @active_devices = `/sbin/ifconfig | grep ^[a-z] | awk '{print \$1}'`; chop @active_devices; + +my %aliased_devices; (/^alias\s+(eth[0-9])\s+(\S+)/) and ($aliased_devices{$1} = $2) foreach (`cat /etc/modules.conf`); +my @all_cards = map { "Interface $_ (using module $aliased_devices{$_})" } (keys %aliased_devices); + + +# print "pci_detection: "; print ">".$_->[2]."< " foreach (@pci_ethernet_cards); +# print "\nconfigured: "; print ">".$_."< " foreach (@configured_devices); +# print "\nactive: "; print ">".$_."< " foreach (@active_devices); +# print "\naliased: "; print ">".$_." => ".$aliased_devices{$_}."< " foreach (keys %aliased_devices); +# print "\n"; +# print "\nall_cards: "; print ">".$_."< " foreach (@all_cards); + +# +#foreach $pci_card (@pci_ethernet_cards) +#{ +# my $this_card = $pci_card->[1]; +# foreach $aliased_dev (keys %aliased_devices) +# { +# if ($pci_card->[2] eq $aliased_devices{$aliased_dev}) +# { +# $this_card .= ", hardware-configured"; +# grep(/$aliased_dev/, @configured_devices) and $this_card .= ", software-configured"; +# grep(/$aliased_dev/, @active_devices) and $this_card .= ", active"; +# } +# } +# push @all_cards, $this_card; +#} + + +#- setup the network interface we shall use + +my $interface; +if ($#all_cards == -1) +{ + $in->ask_warn(_("No NIC on your system!"), + _("No ethernet network adapter is currently configured on your\n". + "system. Please run the hardware configuration tool.")); + $in->exit(0); +} +elsif ($#all_cards == 0) +{ + $interface = $all_cards[0]; + $in->ask_okcancel(_("Network interface"), + _("There is only one configured network adapter on your system:\n\n$interface\n\n". + "Would you like to setup your Local Area Network with that adapter?"), 1) or $in->exit(0); +} +else +{ + $interface = $in->ask_from_list(_("Choose the network interface"), + _("Here are the configured network adapters on your system; please\n". + "choose which one to use to setup your Local Area Network."), + \@all_cards, + ); + defined $interface or $in->exit(0); +} +$interface =~ /(eth[0-9]+)/ or die("Internal error"); +my $device = $1; + + +#- setup the address for the LAN + +my $lan_address = "192.168.0.0"; +$::expert and ($lan_address = $in->ask_from_entry(_("Local Area Network specification"), + _("You may now decide which class C network will be your LAN.\n"), + _("Network:"), $lan_address, + ) or $in->exit(0)); +($lan_address =~ /^([0-9]+\.[0-9]+\.[0-9]+)\.0$/) or die "Invalid network.\n"; +$lan_address = $1; + + +#- test for potential conflict with other networks + +my @configured_devices = map { /ifcfg-(\S+)/; $1 } `ls /etc/sysconfig/network-scripts/ifcfg-*`; + +foreach (@configured_devices) +{ + if ($_ ne $device) + { + local *IFCFG; + my $ifcfg = "/etc/sysconfig/network-scripts/ifcfg-$_"; + open IFCFG, "$ifcfg" or die "Can't open $ifcfg"; + my @ifcfg_content = <IFCFG>; + grep(/$lan_address/, @ifcfg_content) and $in->ask_warn('', _("Potential LAN address conflict found in current config of $_!\n")) and $in->exit(0); + close IFCFG; + } +} + + +#- ask for confirmation + +$in->ask_okcancel(_("Internet Connection Sharing - setup of $device"), + _("The following interface is about to be configured:\n\n$interface\n\n". + "It will be setup on a Local Area Network ($lan_address.0); additionnally, IP forwarding ". + "and masquerading will be enabled, together with a DHCP server.\n". + "You will then be able to connect other computers to this network, with automatic ". + "DHCP configuration."), 1) or $in->exit(0); + + + +#- ********************************** +#- * 2nd step: configure + +my $wait_configuring = $in->wait_message('Configuring...', _("Configuring scripts, installing software, starting daemons...")); + +#- setup the /etc/sysconfig/network-script/ script + +my $network_scripts = "/etc/sysconfig/network-scripts"; +-f "$network_scripts/ifcfg-$device" and rename("$network_scripts/ifcfg-$device", "$network_scripts/old.ifcfg-$device"); +my $ifcfg = "$network_scripts/ifcfg-$device"; +local *IFCFG; open IFCFG, ">$ifcfg" or die "Can't open $ifcfg"; +print IFCFG <<EOF; +DEVICE=$device +BOOTPROTO=static +IPADDR=$lan_address.1 +NETMASK=255.255.255.0 +NETWORK=$lan_address.0 +BROADCAST=$lan_address.255 +ONBOOT=yes +EOF +close IFCFG; + + +#- install and setup the FORWARD and MASQ stuff with IPCHAINS + +my $f = "/sbin/ipchains"; +-e $f or system("urpmi --auto ipchains"); +-e $f or ($in->ask_warn('', _("Could not install ipchains RPM with urpmi.")) and $in->exit(0)); + +my $rcfirewall = "/etc/rc.d/rc.firewall"; +-f $rcfirewall and rename($rcfirewall, "$rcfirewall.old"); +local *RCFIREWALL; open RCFIREWALL, ">$rcfirewall" or die "Can't open $rcfirewall"; +print RCFIREWALL <<EOF; +#!/bin/sh +# +# rc.firewall - Initial SIMPLE IP Masquerade test for 2.1.x and 2.2.x kernels using IPCHAINS +# +# Load all required IP MASQ modules +# +# NOTE: Only load the IP MASQ modules you need. All current IP MASQ modules +# are shown below but are commented out from loading. + +# Needed to initially load modules +# +/sbin/depmod -a + +# Supports the proper masquerading of FTP file transfers using the PORT method +# +/sbin/modprobe ip_masq_ftp + +# Supports the masquerading of RealAudio over UDP. Without this module, +# RealAudio WILL function but in TCP mode. This can cause a reduction +# in sound quality +# +#/sbin/modprobe ip_masq_raudio + +# Supports the masquerading of IRC DCC file transfers +# +#/sbin/modprobe ip_masq_irc + + +# Supports the masquerading of Quake and QuakeWorld by default. This modules is +# for for multiple users behind the Linux MASQ server. If you are going to play +# Quake I, II, and III, use the second example. +# +# NOTE: If you get ERRORs loading the QUAKE module, you are running an old +# ----- kernel that has bugs in it. Please upgrade to the newest kernel. +# +#Quake I / QuakeWorld (ports 26000 and 27000) +#/sbin/modprobe ip_masq_quake +# +#Quake I/II/III / QuakeWorld (ports 26000, 27000, 27910, 27960) +#/sbin/modprobe ip_masq_quake 26000,27000,27910,27960 + + +# Supports the masquerading of the CuSeeme video conferencing software +# +#/sbin/modprobe ip_masq_cuseeme + +#Supports the masquerading of the VDO-live video conferencing software +# +#/sbin/modprobe ip_masq_vdolive + + +#CRITICAL: Enable IP forwarding since it is disabled by default since +# +# Redhat Users: you may try changing the options in /etc/sysconfig/network from: +# +# FORWARD_IPV4=false +# to +# FORWARD_IPV4=true +# +echo "1" > /proc/sys/net/ipv4/ip_forward + + +# Dynamic IP users: +# +# If you get your IP address dynamically from SLIP, PPP, or DHCP, enable this following +# option. This enables dynamic-ip address hacking in IP MASQ, making the life +# with Diald and similar programs much easier. +# +#echo "1" > /proc/sys/net/ipv4/ip_dynaddr + + +# MASQ timeouts +# +# 2 hrs timeout for TCP session timeouts +# 10 sec timeout for traffic after the TCP/IP "FIN" packet is received +# 160 sec timeout for UDP traffic (Important for MASQ'ed ICQ users) +# +/sbin/ipchains -M -S 7200 10 160 + + +# DHCP: For people who receive their external IP address from either DHCP or BOOTP +# such as ADSL or Cablemodem users, it is necessary to use the following +# before the deny command. The "bootp_client_net_if_name" should be replaced +# the name of the link that the DHCP/BOOTP server will put an address on to? +# This will be something like "eth0", "eth1", etc. +# +# This example is currently commented out. +# +# +#/sbin/ipchains -A input -j ACCEPT -i bootp_clients_net_if_name -s 0/0 67 -d 0/0 68 -p udp + +# Enable simple IP forwarding and Masquerading +# +# NOTE: The following is an example for an internal LAN address in the 192.168.0.x +# network with a 255.255.255.0 or a "24" bit subnet mask. +# +# Please change this network number and subnet mask to match your internal LAN setup +# +/sbin/ipchains -P forward DENY +/sbin/ipchains -A forward -s $lan_address.0/24 -j MASQ +EOF +close RCFIREWALL; +chmod 0700, $rcfirewall; + + +#- be sure that FORWARD_IPV4 is enabled in /etc/sysconfig/network + +my $sysconf_network = "/etc/sysconfig/network"; +open SYSCONF_NETWORK, "$sysconf_network" or die "Can't open $sysconf_network"; +my @sysconf_network_content = <SYSCONF_NETWORK>; +close SYSCONF_NETWORK; +($_ =~ /^FORWARD_IPV4=/ and $_="FORWARD_IPV4=true\n") foreach (@sysconf_network_content); +grep(/^FORWARD_IPV4=/, @sysconf_network_content) or push @sysconf_network_content, "FORWARD_IPV4=true\n"; +open SYSCONF_NETWORK, ">$sysconf_network" or die "Can't open $sysconf_network"; +print SYSCONF_NETWORK @sysconf_network_content; +close SYSCONF_NETWORK; + + +#- install and setup the DHCP server + +$f = "/usr/sbin/dhcpd"; +-e $f or system("urpmi --auto dhcp"); +-e $f or ($in->ask_warn('', _("Could not install dhcp RPM with urpmi.")) and $in->exit(0)); + +my $dhcpdconf = "/etc/dhcpd.conf"; +-f $dhcpdconf and rename($dhcpdconf, "$dhcpdconf.old"); +local *DHCPDCONF; open DHCPDCONF, ">$dhcpdconf" or die "Can't open $dhcpdconf"; +print DHCPDCONF <<EOF; +subnet $lan_address.0 netmask 255.255.255.0 { + # default gateway + option routers $lan_address.1; + option subnet-mask 255.255.255.0; + + option domain-name "homelan.org"; + option domain-name-servers $lan_address.1; + + range dynamic-bootp $lan_address.16 $lan_address.255; + default-lease-time 21600; + max-lease-time 43200; +} +EOF +close DHCPDCONF; + + +#- put the interface for the dhcp server in linuxconf config, for the /etc script of dhcpd + +my $conf_linuxconf = "/etc/conf.linuxconf"; +open CONF_LINUXCONF, "$conf_linuxconf" or die "Can't open $conf_linuxconf"; +my @conf_linuxconf_content = <CONF_LINUXCONF>; +close CONF_LINUXCONF; +($_ =~ /^DHCP.interface/ and $_="DHCP.interface $device\n") foreach (@conf_linuxconf_content); +grep(/DHCP.interface/, @conf_linuxconf_content) or push @conf_linuxconf_content, "DHCP.interface $device\n"; +open CONF_LINUXCONF, ">$conf_linuxconf" or die "Can't open $conf_linuxconf"; +print CONF_LINUXCONF @conf_linuxconf_content; +close CONF_LINUXCONF; + + +#- install the BIND and caching nameserver stuff + +$f = "/usr/sbin/named"; +-e $f or system("urpmi --auto bind"); +-e $f or ($in->ask_warn('', _("Could not install bind RPM with urpmi.")) and $in->exit(0)); + +$f = "/var/named/named.local"; +-e $f or system("urpmi --auto caching-nameserver"); +-e $f or ($in->ask_warn('', _("Could not install caching-nameserver RPM with urpmi.")) and $in->exit(0)); + + +#- start the daemons + +(system("/etc/rc.d/init.d/network restart") == 0) or die "Could not restart the network"; +(system("/etc/rc.d/rc.firewall") == 0) or die "Could not start the firewall script"; +grep(/is running/, `/etc/rc.d/init.d/dhcpd status`) and ((system("/etc/rc.d/init.d/dhcpd stop") == 0) or die "Could not stop the dhcp server"); +(system("/etc/rc.d/init.d/dhcpd start") == 0) or die "Could not start the dhcp server"; +(system("/sbin/chkconfig --level 345 dhcpd on") == 0) or die "Could not chkconfig dhcpd"; +grep(/Connection refused/, `/etc/rc.d/init.d/named status 2>&1`) or ((system("/etc/rc.d/init.d/named stop") == 0) or die "Could not stop the named server"); +(system("/etc/rc.d/init.d/named start") == 0) or die "Could not start the caching nameserver"; +(system("/sbin/chkconfig --level 345 named on") == 0) or die "Could not chkconfig named"; + + +undef $wait_configuring; +$in->ask_warn(_("Everything configured!"), + _("Everything has been configured.\n". + "You may now connect computers on your Local Area Network,\n". + "using automatic DHCP network configuration.")); + + +$in->exit(0); + + + +# 0.9.0 Thu Aug 17 15:03:40 2000 +# - first version |