summaryrefslogtreecommitdiffstats
path: root/perl-install/standalone/scannerdrake
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/standalone/scannerdrake')
-rwxr-xr-xperl-install/standalone/scannerdrake62
1 files changed, 30 insertions, 32 deletions
diff --git a/perl-install/standalone/scannerdrake b/perl-install/standalone/scannerdrake
index 895e9165c..b4c319d61 100755
--- a/perl-install/standalone/scannerdrake
+++ b/perl-install/standalone/scannerdrake
@@ -3,7 +3,7 @@
# scannerdrake $Id$
# Yves Duret <yduret at mandriva.com>
# Till Kamppeter <till at mandriva.com>
-# Copyright (C) 2001-2005 Mandriva
+# Copyright (C) 2001-2006 Mandriva
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -51,7 +51,7 @@ if (!files_exist(qw(/usr/bin/scanimage
if (!$in->ask_yesorno(N("Warning"), N("SANE packages need to be installed to use scanners.
Do you want to install the SANE packages?"))) {
- $in->ask_warn("Scannerdrake",
+ $in->ask_warn(N("Warning"),
N("Aborting Scannerdrake."));
exit 0;
}
@@ -63,11 +63,11 @@ Do you want to install the SANE packages?"))) {
}
}
if ($::Manual) { manual(); quit() }
-my $wait = $in->wait_message(N("Scannerdrake"),
+my $wait = $in->wait_message(N("Please wait"),
N("Searching for configured scanners..."));
my @c = scanner::configured();
$wait = undef;
-$wait = $in->wait_message(N("Scannerdrake"),
+$wait = $in->wait_message(N("Please wait"),
N("Searching for new scanners..."));
my @f = scanner::detect(@c);
$wait = undef;
@@ -75,7 +75,7 @@ my $changed = 0;
@f and $changed = auto();
if ($changed) {
my $_wait =
- $in->wait_message(N("Scannerdrake"),
+ $in->wait_message(N("Please wait"),
N("Re-generating list of configured scanners..."));
@c = scanner::configured();
}
@@ -98,10 +98,10 @@ sub auto() {
my $name = $_->{val}{DESCRIPTION};
$name =~ s/\s$//; # some HP entries have a trailing space, i will correct usbtable asap
if ($scanner::scannerDB->{$name}{flags}{unsupported}) {
- $in->ask_warn('Scannerdrake', N("The %s is not supported by this version of %s.", removeverticalbar($name), $distroname));
+ $in->ask_warn(N("Error"), N("The %s is not supported by this version of %s.", removeverticalbar($name), $distroname));
next;
}
- if ($in->ask_yesorno('Scannerdrake', N("%s found on %s, configure it automatically?", removeverticalbar($name), $_->{port}),1)) {
+ if ($in->ask_yesorno(N("Confirmation"), N("%s found on %s, configure it automatically?", removeverticalbar($name), $_->{port}),1)) {
$c = (tryConfScanner($name, $_->{port},
$_->{val}{vendor},
$_->{val}{id}) ||
@@ -112,7 +112,7 @@ sub auto() {
$_->{val}{id}, $name);
}
} else {
- $in->ask_yesorno('Scannerdrake',
+ $in->ask_yesorno(N("Confirmation"),
N("%s is not in the scanner database, configure it manually?",
removeverticalbar($_->{val}{DESCRIPTION})),1)
and $c =
@@ -127,21 +127,19 @@ sub auto() {
sub manual {
my ($port, $vendor, $product, $name) = @_;
my $s =
- $in->ask_from_treelist('Scannerdrake',
- N("Select a scanner model") .
- if_($port || $name, N(" (")) .
- if_($name, N("Detected model: %s",
- removeverticalbar($name))) .
- if_($port && $name, N(", ")) .
- if_($port, N("Port: %s", $port)) .
- if_($port || $name, N(")")),
+ $in->ask_from_treelist(N("Scanner configuration"),
+ ($port && $name ? N("Select a scanner model (Detected model: %s, Port: %s)",
+ removeverticalbar($name), $port)
+ : $name ? N("Select a scanner model (Detected model: %s)", removeverticalbar($name))
+ : $port ? N("Select a scanner model (Port: %s)", $port) : ""
+ ),
'|', [' None', map { $_ . if_($scanner::scannerDB->{$_}{flags}{unsupported}, N(" (UNSUPPORTED)")) } keys %$scanner::scannerDB],
'') or return 0;
return 0 if $s eq ' None';
my $unsuppstr = quotemeta(N(" (UNSUPPORTED)"));
$s =~ s/$unsuppstr$//;
if ($scanner::scannerDB->{$s}{flags}{unsupported}) {
- $in->ask_warn('Scannerdrake', N("The %s is not supported under Linux.", removeverticalbar($s)));
+ $in->ask_warn(N("Error"), N("The %s is not supported under Linux.", removeverticalbar($s)));
return 0;
}
return tryConfScanner($s, $port, $vendor, $product);
@@ -171,7 +169,7 @@ sub installfirmware {
my $choice = N("Do not install firmware file");
while (1) {
# Tell user about firmware installation
- $in->ask_from('Scannerdrake',
+ $in->ask_from(N("Scanner Firmware"),
N("It is possible that your %s needs its firmware to be uploaded everytime when it is turned on.", removeverticalbar($model)) . " " .
N("If this is the case, you can make this be done automatically.") . " " .
N("To do so, you need to supply the firmware file for your scanner so that it can be installed.") . " " .
@@ -221,7 +219,7 @@ sub updatefirmware {
my ($scannerchoice, $mediachoice);
while (1) {
# Tell user about firmware installation
- $in->ask_from('Scannerdrake',
+ $in->ask_from(N("Scanner Firmware"),
($#scanners > 0 ?
N("It is possible that your scanners need their firmware to be uploaded everytime when they are turned on.") :
N("It is possible that your %s needs its firmware to be uploaded everytime when it is turned on.", $scanners[0])) . " " .
@@ -285,7 +283,7 @@ sub updatefirmware {
}
# Success message
- $in->ask_warn('Scannerdrake',
+ $in->ask_warn(N("Information"),
N("The firmware file for your %s was successfully installed.",
$scannerchoice));
@@ -296,12 +294,12 @@ sub tryConfScanner {
# take care if interactive output is needed (unsupported, parallel..)
my ($model, $port, $vendor, $product) = @_;
if ($scanner::scannerDB->{$model}{flags}{unsupported}) {
- $in->ask_warn('Scannerdrake', N("The %s is unsupported",
+ $in->ask_warn(N("Warning"), N("The %s is unsupported",
removeverticalbar($model)));
return 0;
}
if ($scanner::scannerDB->{$model}{server} =~ /(printerdrake|hpoj|hpaio|hplip)/i) {
- $in->ask_warn('Scannerdrake', N("The %s must be configured by printerdrake.\nYou can launch printerdrake from the %s Control Center in Hardware section.", removeverticalbar($model), $shortdistroname));
+ $in->ask_warn(N("Warning"), N("The %s must be configured by printerdrake.\nYou can launch printerdrake from the %s Control Center in Hardware section.", removeverticalbar($model), $shortdistroname));
return 0;
}
my @modules = ();
@@ -318,7 +316,7 @@ sub tryConfScanner {
push(@modules, @{$scanner::scannerDB->{$model}{parportkernel}});
}
if ($#modules >= 0) {
- my $wait = $in->wait_message(N("Scannerdrake"),
+ my $wait = $in->wait_message(N("Please wait"),
N("Setting up kernel modules..."));
foreach my $m (@modules) {
eval { modules::load($m) };
@@ -330,7 +328,7 @@ sub tryConfScanner {
}
if ($scanner::scannerDB->{$model}{ask} =~ /DEVICE/ || !$port) {
$port ||= N("Auto-detect available ports");
- $in->ask_from('Scannerdrake',
+ $in->ask_from(N("Device choice"),
N("Please select the device where your %s is attached", removeverticalbar($model)) . " " .
N("(Note: Parallel ports cannot be auto-detected)"),
[
@@ -367,7 +365,7 @@ sub tryConfScanner {
],
) or return 0;
if ($port eq N("Auto-detect available ports")) {
- $wait = $in->wait_message(N("Scannerdrake"),
+ $wait = $in->wait_message(N("Please wait"),
N("Searching for scanners..."));
my @d = scanner::detect();
undef $wait;
@@ -376,7 +374,7 @@ sub tryConfScanner {
removeverticalbar($_->{val}{DESCRIPTION}) . ")";
} @d;
$port ||= $list[0];
- $in->ask_from('Scannerdrake',
+ $in->ask_from(N("Device choice"),
N("Please select the device where your %s is attached", removeverticalbar($model)),
[
{ label => N("choose device"),
@@ -460,7 +458,7 @@ sub mainwindow {
if ($in->ask_from_
(
{
- title => N("Scannerdrake"),
+ title => N("Scanner Management"),
messages => $msg,
ok => "",
cancel => "",
@@ -504,11 +502,11 @@ sub mainwindow {
if ($buttonclicked eq "autoadd") {
# Do scanner auto-detection
my $wait =
- $in->wait_message(N("Scannerdrake"),
+ $in->wait_message(N("Please wait"),
N("Searching for configured scanners..."));
@configured = scanner::configured();
$wait =
- $in->wait_message(N("Scannerdrake"),
+ $in->wait_message(N("Please wait"),
N("Searching for new scanners..."));
my @f = scanner::detect(@configured);
$wait = undef;
@@ -530,7 +528,7 @@ sub mainwindow {
}
if ($changed) {
my $_wait =
- $in->wait_message(N("Scannerdrake"),
+ $in->wait_message(N("Please wait"),
N("Re-generating list of configured scanners..."));
@configured = scanner::configured();
}
@@ -595,7 +593,7 @@ sub sharewindow {
if ($in->ask_from_
(
{
- title => N("Scannerdrake"),
+ title => N("Scanner Sharing"),
messages => N("Here you can choose whether the scanners connected to this machine should be accessible by remote machines and by which remote machines.") .
N("You can also decide here whether scanners on remote machines should be made available on this machine."),
},
@@ -957,7 +955,7 @@ sub sharewindow {
if (!$in->ask_yesorno(N("Warning"), N("saned needs to be installed to share the local scanner(s).
Do you want to install the saned package?"))) {
- $in->ask_warn("Scannerdrake",
+ $in->ask_warn("Warning",
N("Your scanner(s) will not be available on the network."));
} elsif (!$in->do_pkgs->install('xinetd', 'saned')) {
$in->ask_warn(N("Error"),
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-03 14:00:00 +0000