summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po/zh_TW.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po/zh_TW.po')
-rw-r--r--perl-install/share/po/zh_TW.po814
1 files changed, 406 insertions, 408 deletions
diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index 1d5ee8ecb..ce72e0268 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -18,7 +18,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2008-09-19 14:51+0200\n"
+"POT-Creation-Date: 2008-09-19 15:04+0200\n"
"PO-Revision-Date: 2008-03-12 22:25+0800\n"
"Last-Translator: You-Cheng Hsieh <yochenhsieh@gmail.com>\n"
"Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -29,10 +29,11 @@ msgstr ""
"X-Poedit-Language: Chinese\n"
"X-Poedit-Country: TAIWAN\n"
-#: any.pm:252 any.pm:853 diskdrake/interactive.pm:554
-#: diskdrake/interactive.pm:741 diskdrake/interactive.pm:785
-#: diskdrake/interactive.pm:843 diskdrake/interactive.pm:1133 do_pkgs.pm:221
-#: do_pkgs.pm:267 harddrake/sound.pm:285 interactive.pm:584 pkgs.pm:257
+#: any.pm:252 any.pm:855 diskdrake/interactive.pm:580
+#: diskdrake/interactive.pm:767 diskdrake/interactive.pm:811
+#: diskdrake/interactive.pm:897 diskdrake/interactive.pm:1151
+#: diskdrake/interactive.pm:1203 do_pkgs.pm:221 do_pkgs.pm:267
+#: harddrake/sound.pm:285 interactive.pm:584 pkgs.pm:258
#, c-format
msgid "Please wait"
msgstr "請稍候"
@@ -115,7 +116,7 @@ msgstr "根分割區的第一扇區"
msgid "On Floppy"
msgstr "在軟碟機"
-#: any.pm:354
+#: any.pm:354 pkgs.pm:254
#, c-format
msgid "Skip"
msgstr "略過"
@@ -130,88 +131,88 @@ msgstr "開機載入程式安裝中"
msgid "Where do you want to install the bootloader?"
msgstr "您要將開機載入程式安裝在那裡？"
-#: any.pm:386
+#: any.pm:388
#, c-format
msgid "Boot Style Configuration"
msgstr "開機樣式組態設定"
-#: any.pm:396 any.pm:427 any.pm:428
+#: any.pm:398 any.pm:427 any.pm:428
#, c-format
msgid "Bootloader main options"
msgstr "開機載入程式主要選項"
-#: any.pm:400
+#: any.pm:402
#, c-format
msgid "Bootloader"
msgstr "開機載入器"
-#: any.pm:401 any.pm:431
+#: any.pm:403 any.pm:431
#, c-format
msgid "Bootloader to use"
msgstr "要用的開機載入程式"
-#: any.pm:403 any.pm:433
+#: any.pm:405 any.pm:433
#, c-format
msgid "Boot device"
msgstr "開機裝置"
-#: any.pm:405
+#: any.pm:407
#, c-format
msgid "Main options"
msgstr "主要選項"
-#: any.pm:406
+#: any.pm:408
#, c-format
msgid "Delay before booting default image"
msgstr "以預設的核心影像開機之前等待的時間"
-#: any.pm:407
+#: any.pm:409
#, c-format
msgid "Enable ACPI"
msgstr "啟用 ACPI"
-#: any.pm:408
+#: any.pm:410
#, c-format
msgid "Enable APIC"
msgstr "啟用 APIC"
-#: any.pm:409
+#: any.pm:411
#, c-format
msgid "Enable Local APIC"
msgstr "啟用本地 APIC"
-#: any.pm:411 any.pm:797 any.pm:812 authentication.pm:239
+#: any.pm:413 any.pm:802 any.pm:817 authentication.pm:245
#: diskdrake/smbnfs_gtk.pm:181
#, c-format
msgid "Password"
msgstr "密碼"
-#: any.pm:413 authentication.pm:250
+#: any.pm:415 authentication.pm:256
#, c-format
msgid "The passwords do not match"
msgstr "密碼不符合"
-#: any.pm:413 authentication.pm:250 diskdrake/interactive.pm:1300
+#: any.pm:415 authentication.pm:256 diskdrake/interactive.pm:1375
#, c-format
msgid "Please try again"
msgstr "請再試一次"
-#: any.pm:414
+#: any.pm:416
#, c-format
msgid "You can not use a password with %s"
msgstr "您不能使用 %s 作為密碼"
-#: any.pm:417 any.pm:799 any.pm:814 authentication.pm:240
+#: any.pm:419 any.pm:804 any.pm:819 authentication.pm:246
#, c-format
msgid "Password (again)"
msgstr "密碼 (再一次)"
-#: any.pm:418
+#: any.pm:420
#, c-format
msgid "Restrict command line options"
msgstr "限制命令列選項"
-#: any.pm:418
+#: any.pm:420
#, c-format
msgid "restrict"
msgstr "限制"
@@ -257,97 +258,97 @@ msgstr "允許 Open Firmware 開機？"
msgid "Default OS?"
msgstr "預設的作業系統？"
-#: any.pm:505
+#: any.pm:506
#, c-format
msgid "Image"
msgstr "核心影像"
-#: any.pm:506 any.pm:519
+#: any.pm:507 any.pm:520
#, c-format
msgid "Root"
msgstr "根目錄"
-#: any.pm:507 any.pm:532
+#: any.pm:508 any.pm:533
#, c-format
msgid "Append"
msgstr "附加參數"
-#: any.pm:509
+#: any.pm:510
#, c-format
msgid "Xen append"
msgstr "Xen 附加參數"
-#: any.pm:512
+#: any.pm:513
#, c-format
msgid "Video mode"
msgstr "顯示模式"
-#: any.pm:514
+#: any.pm:515
#, c-format
msgid "Initrd"
msgstr "Initrd"
-#: any.pm:515
+#: any.pm:516
#, c-format
msgid "Network profile"
msgstr "網路 profile"
-#: any.pm:524 any.pm:529 any.pm:531 diskdrake/interactive.pm:376
+#: any.pm:525 any.pm:530 any.pm:532 diskdrake/interactive.pm:400
#, c-format
msgid "Label"
msgstr "標籤"
-#: any.pm:526 any.pm:534 harddrake/v4l.pm:438
+#: any.pm:527 any.pm:535 harddrake/v4l.pm:438
#, c-format
msgid "Default"
msgstr "預設"
-#: any.pm:533
+#: any.pm:534
#, c-format
msgid "NoVideo"
msgstr "沒有 Video 參數"
-#: any.pm:544
+#: any.pm:545
#, c-format
msgid "Empty label not allowed"
msgstr "不允許空白標籤"
-#: any.pm:545
+#: any.pm:546
#, c-format
msgid "You must specify a kernel image"
msgstr "您需要指定一個核心影像"
-#: any.pm:545
+#: any.pm:546
#, c-format
msgid "You must specify a root partition"
msgstr "您需要指定一個 root 分割區"
-#: any.pm:546
+#: any.pm:547
#, c-format
msgid "This label is already used"
msgstr "這個標籤已經被用過了"
-#: any.pm:564
+#: any.pm:565
#, c-format
msgid "Which type of entry do you want to add?"
msgstr "您要新增哪一類的項目？"
-#: any.pm:565
+#: any.pm:566
#, c-format
msgid "Linux"
msgstr "Linux"
-#: any.pm:565
+#: any.pm:566
#, c-format
msgid "Other OS (SunOS...)"
msgstr "其他作業系統 (SunOS...)"
-#: any.pm:566
+#: any.pm:567
#, c-format
msgid "Other OS (MacOS...)"
msgstr "其他作業系統 (MacOS...)"
-#: any.pm:566
+#: any.pm:567
#, c-format
msgid "Other OS (Windows...)"
msgstr "其他作業系統 (Windows...)"
@@ -366,188 +367,188 @@ msgstr ""
"目前有這些選項在您的開機選單中。\n"
"您可以建立更多的選項或修改既有的選項。"
-#: any.pm:758
+#: any.pm:763
#, c-format
msgid "access to X programs"
msgstr "存取 X 程式"
-#: any.pm:759
+#: any.pm:764
#, c-format
msgid "access to rpm tools"
msgstr "存取 RPM 套件工具程式"
-#: any.pm:760
+#: any.pm:765
#, c-format
msgid "allow \"su\""
msgstr "允許 \"su\""
-#: any.pm:761
+#: any.pm:766
#, c-format
msgid "access to administrative files"
msgstr "存取系統管理者權限的檔案"
-#: any.pm:762
+#: any.pm:767
#, c-format
msgid "access to network tools"
msgstr "存取網路工具"
-#: any.pm:763
+#: any.pm:768
#, c-format
msgid "access to compilation tools"
msgstr "存取編譯工具"
-#: any.pm:769
+#: any.pm:774
#, c-format
msgid "(already added %s)"
msgstr "( %s 已經加入)"
-#: any.pm:775
+#: any.pm:780
#, c-format
msgid "Please give a user name"
msgstr "請輸入使用者名稱"
-#: any.pm:776
+#: any.pm:781
#, c-format
msgid ""
"The user name must contain only lower cased letters, numbers, `-' and `_'"
msgstr "使用者名稱只能含有小寫英文字母、數字、`-' 與 `_'"
-#: any.pm:777
+#: any.pm:782
#, c-format
msgid "The user name is too long"
msgstr "這個使用者名稱太長了"
-#: any.pm:778
+#: any.pm:783
#, c-format
msgid "This user name has already been added"
msgstr "這個使用者已經加入過了"
-#: any.pm:784 any.pm:816
+#: any.pm:789 any.pm:821
#, c-format
msgid "User ID"
msgstr "使用者 ID"
-#: any.pm:784 any.pm:817
+#: any.pm:789 any.pm:822
#, c-format
msgid "Group ID"
msgstr "群組 ID"
-#: any.pm:785
+#: any.pm:790
#, c-format
msgid "%s must be a number"
msgstr "%s 必須是數字"
-#: any.pm:786
+#: any.pm:791
#, c-format
msgid "%s should be above 500. Accept anyway?"
msgstr "%s 必須大於 500。還是要接受嗎？"
-#: any.pm:790
+#: any.pm:795
#, c-format
msgid "User management"
msgstr "使用者管理"
-#: any.pm:796 authentication.pm:226
+#: any.pm:801 authentication.pm:232
#, c-format
msgid "Set administrator (root) password"
msgstr "設定管理者 (root) 密碼"
-#: any.pm:801
+#: any.pm:806
#, c-format
msgid "Enter a user"
msgstr "輸入一位使用者"
-#: any.pm:803
+#: any.pm:808
#, c-format
msgid "Icon"
msgstr "圖示"
-#: any.pm:806
+#: any.pm:811
#, c-format
msgid "Real name"
msgstr "真實名稱"
-#: any.pm:810
+#: any.pm:815
#, c-format
msgid "Login name"
msgstr "登入名稱"
-#: any.pm:815
+#: any.pm:820
#, c-format
msgid "Shell"
msgstr "Shell"
-#: any.pm:848
+#: any.pm:855
#, c-format
msgid "Please wait, adding media..."
msgstr "請稍後，新增媒體中..."
-#: any.pm:866 security/l10n.pm:14
+#: any.pm:883 security/l10n.pm:14
#, c-format
msgid "Autologin"
msgstr "自動登入"
-#: any.pm:867
+#: any.pm:884
#, c-format
msgid "I can set up your computer to automatically log on one user."
msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統。"
-#: any.pm:868
+#: any.pm:885
#, c-format
msgid "Use this feature"
msgstr "使用此功能"
-#: any.pm:869
+#: any.pm:886
#, c-format
msgid "Choose the default user:"
msgstr "選取預設的使用者："
-#: any.pm:870
+#: any.pm:887
#, c-format
msgid "Choose the window manager to run:"
msgstr "選取您想使用的視窗管理程式："
-#: any.pm:881 any.pm:899 any.pm:957
+#: any.pm:898 any.pm:918 any.pm:979
#, c-format
msgid "Release Notes"
msgstr "發行紀錄"
-#: any.pm:906 any.pm:1250 interactive/gtk.pm:804
+#: any.pm:925 any.pm:1271 interactive/gtk.pm:797
#, c-format
msgid "Close"
msgstr "關閉"
-#: any.pm:943
+#: any.pm:965
#, c-format
msgid "License agreement"
msgstr "版權協議"
-#: any.pm:945 diskdrake/dav.pm:26
+#: any.pm:967 diskdrake/dav.pm:26
#, c-format
msgid "Quit"
msgstr "離開"
-#: any.pm:952
+#: any.pm:974
#, fuzzy, c-format
msgid "Do you accept this license ?"
msgstr "您還有其他的嗎？"
-#: any.pm:953
+#: any.pm:975
#, c-format
msgid "Accept"
msgstr "接受"
-#: any.pm:953
+#: any.pm:975
#, c-format
msgid "Refuse"
msgstr "拒絕"
-#: any.pm:980 any.pm:1045
+#: any.pm:1001 any.pm:1067
#, c-format
msgid "Please choose a language to use"
msgstr "請選擇要使用那個語言。"
-#: any.pm:1009
+#: any.pm:1030
#, c-format
msgid ""
"Mandriva Linux can support multiple languages. Select\n"
@@ -557,77 +558,77 @@ msgstr ""
"Mandriva Linux 能支援多種語言，請選擇您想安裝的語言。\n"
"它們將可供您完成安裝並重新啟動系統之後使用。"
-#: any.pm:1012
+#: any.pm:1033
#, c-format
msgid "Multi languages"
msgstr "多語系"
-#: any.pm:1023 any.pm:1054
+#: any.pm:1044 any.pm:1076
#, c-format
msgid "Old compatibility (non UTF-8) encoding"
msgstr "舊式相容 (非 UTF-8) 編碼"
-#: any.pm:1025
+#: any.pm:1046
#, c-format
msgid "All languages"
msgstr "所有語言"
-#: any.pm:1046
+#: any.pm:1068
#, c-format
msgid "Language choice"
msgstr "語言選擇"
-#: any.pm:1101
+#: any.pm:1122
#, c-format
msgid "Country / Region"
msgstr "國家/地區"
-#: any.pm:1102
+#: any.pm:1123
#, c-format
msgid "Please choose your country"
msgstr "請選擇您的國家。"
-#: any.pm:1104
+#: any.pm:1125
#, c-format
msgid "Here is the full list of available countries"
msgstr "以下是全部可用的所有的國家清單"
-#: any.pm:1105
+#: any.pm:1126
#, c-format
msgid "Other Countries"
msgstr "其他國家"
-#: any.pm:1105 interactive.pm:484 interactive/gtk.pm:426
+#: any.pm:1126 interactive.pm:485 interactive/gtk.pm:445
#, c-format
msgid "Advanced"
msgstr "進階"
-#: any.pm:1111
+#: any.pm:1132
#, c-format
msgid "Input method:"
msgstr "輸入法："
-#: any.pm:1114
+#: any.pm:1135
#, c-format
msgid "None"
msgstr "無"
-#: any.pm:1195
+#: any.pm:1216
#, c-format
msgid "No sharing"
msgstr "不分享"
-#: any.pm:1195
+#: any.pm:1216
#, c-format
msgid "Allow all users"
msgstr "允許所有使用者"
-#: any.pm:1195
+#: any.pm:1216
#, c-format
msgid "Custom"
msgstr "自訂"
-#: any.pm:1199
+#: any.pm:1220
#, c-format
msgid ""
"Would you like to allow users to share some of their directories?\n"
@@ -642,32 +643,32 @@ msgstr ""
"\n"
"\"自訂\" 允許每一個使用者自行設定。\n"
-#: any.pm:1211
+#: any.pm:1232
#, c-format
msgid ""
"NFS: the traditional Unix file sharing system, with less support on Mac and "
"Windows."
msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。"
-#: any.pm:1214
+#: any.pm:1235
#, c-format
msgid ""
"SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
"systems."
msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。"
-#: any.pm:1222
+#: any.pm:1243
#, c-format
msgid ""
"You can export using NFS or SMB. Please select which you would like to use."
msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。"
-#: any.pm:1250
+#: any.pm:1271
#, c-format
msgid "Launch userdrake"
msgstr "啟動 userdrake"
-#: any.pm:1252
+#: any.pm:1273
#, c-format
msgid ""
"The per-user sharing uses the group \"fileshare\". \n"
@@ -676,52 +677,52 @@ msgstr ""
"每個使用者的分享都是使用 \"fileshare\" 群組。\n"
"您可以執行 userdrake 在該群組內加入使用者。"
-#: any.pm:1344
+#: any.pm:1366
#, c-format
msgid "Please log out and then use Ctrl-Alt-BackSpace"
msgstr "請登出, 然後用 Ctrl-Alt-BackSpace 重新啟動 X"
-#: any.pm:1348
+#: any.pm:1370
#, c-format
msgid "You need to log out and back in again for changes to take effect"
msgstr "您必須登出之後重新登入才能讓變動生效"
-#: any.pm:1383
+#: any.pm:1405
#, c-format
msgid "Timezone"
msgstr "時區"
-#: any.pm:1383
+#: any.pm:1405
#, c-format
msgid "Which is your timezone?"
msgstr "您的時區為何？"
-#: any.pm:1406 any.pm:1408
+#: any.pm:1428 any.pm:1430
#, c-format
msgid "Date, Clock & Time Zone Settings"
msgstr "日期、時間與時區設定"
-#: any.pm:1409
+#: any.pm:1431
#, c-format
msgid "What is the best time?"
msgstr "最佳的時間是哪一個？"
-#: any.pm:1413
+#: any.pm:1435
#, c-format
msgid "%s (hardware clock set to UTC)"
msgstr "%s (硬體時鐘設定為 UTC 時間)"
-#: any.pm:1414
+#: any.pm:1436
#, c-format
msgid "%s (hardware clock set to local time)"
msgstr "%s (硬體時鐘設定為本地時間)"
-#: any.pm:1416
+#: any.pm:1438
#, c-format
msgid "NTP Server"
msgstr "NTP 伺服器"
-#: any.pm:1417
+#: any.pm:1439
#, c-format
msgid "Automatic time synchronization (using NTP)"
msgstr "自動時間同步 (使用 NTP 服務)"
@@ -746,7 +747,7 @@ msgstr "NIS"
msgid "Smart Card"
msgstr "智慧卡"
-#: authentication.pm:29 authentication.pm:205
+#: authentication.pm:29 authentication.pm:211
#, c-format
msgid "Windows Domain"
msgstr "Windows 網域"
@@ -813,228 +814,228 @@ msgstr ""
msgid "With Kerberos and Ldap for authentication in Active Directory Server "
msgstr "使用 Kerberos 與 LDAP 來在 Active Directory 伺服器上進行認證"
-#: authentication.pm:96 authentication.pm:130 authentication.pm:149
-#: authentication.pm:150 authentication.pm:176 authentication.pm:200
-#: authentication.pm:878
+#: authentication.pm:102 authentication.pm:136 authentication.pm:155
+#: authentication.pm:156 authentication.pm:182 authentication.pm:206
+#: authentication.pm:884
#, c-format
msgid " "
msgstr ""
-#: authentication.pm:97 authentication.pm:131 authentication.pm:177
-#: authentication.pm:201
+#: authentication.pm:103 authentication.pm:137 authentication.pm:183
+#: authentication.pm:207
#, fuzzy, c-format
msgid "Welcome to the Authentication Wizard"
msgstr "需要 Domain 認證"
-#: authentication.pm:99
+#: authentication.pm:105
#, c-format
msgid ""
"You have selected LDAP authentication. Please review the configuration "
"options below "
msgstr ""
-#: authentication.pm:101 authentication.pm:156
+#: authentication.pm:107 authentication.pm:162
#, c-format
msgid "LDAP Server"
msgstr "LDAP 伺服器"
-#: authentication.pm:102 authentication.pm:157
+#: authentication.pm:108 authentication.pm:163
#, c-format
msgid "Base dn"
msgstr ""
-#: authentication.pm:103
+#: authentication.pm:109
#, c-format
msgid "Fetch base Dn "
msgstr ""
-#: authentication.pm:105 authentication.pm:160
+#: authentication.pm:111 authentication.pm:166
#, c-format
msgid "Use encrypt connection with TLS "
msgstr ""
-#: authentication.pm:106 authentication.pm:161
+#: authentication.pm:112 authentication.pm:167
#, c-format
msgid "Download CA Certificate "
msgstr ""
-#: authentication.pm:108 authentication.pm:141
+#: authentication.pm:114 authentication.pm:147
#, c-format
msgid "Use Disconnect mode "
msgstr ""
-#: authentication.pm:109 authentication.pm:162
+#: authentication.pm:115 authentication.pm:168
#, fuzzy, c-format
msgid "Use anonymous BIND "
msgstr "使用匿名 BIND"
-#: authentication.pm:110 authentication.pm:113 authentication.pm:115
-#: authentication.pm:119
+#: authentication.pm:116 authentication.pm:119 authentication.pm:121
+#: authentication.pm:125
#, c-format
msgid " "
msgstr ""
-#: authentication.pm:111 authentication.pm:163
+#: authentication.pm:117 authentication.pm:169
#, c-format
msgid "Bind DN "
msgstr ""
-#: authentication.pm:112 authentication.pm:164
+#: authentication.pm:118 authentication.pm:170
#, fuzzy, c-format
msgid "Bind Password "
msgstr "密碼"
-#: authentication.pm:114
+#: authentication.pm:120
#, c-format
msgid "Advanced path for group "
msgstr ""
-#: authentication.pm:116
+#: authentication.pm:122
#, fuzzy, c-format
msgid "Password base"
msgstr "密碼"
-#: authentication.pm:117
+#: authentication.pm:123
#, fuzzy, c-format
msgid "Group base"
msgstr "群組 ID"
-#: authentication.pm:118
+#: authentication.pm:124
#, c-format
msgid "Shadow base"
msgstr ""
-#: authentication.pm:133
+#: authentication.pm:139
#, c-format
msgid ""
"You have selected Kerberos 5 authentication. Please review the configuration "
"options below "
msgstr ""
-#: authentication.pm:135
+#: authentication.pm:141
#, fuzzy, c-format
msgid "Realm "
msgstr "真實名稱"
-#: authentication.pm:137
+#: authentication.pm:143
#, fuzzy, c-format
msgid "KDCs Servers"
msgstr "LDAP 伺服器"
-#: authentication.pm:139
+#: authentication.pm:145
#, c-format
msgid "Use DNS to resolve hosts for realms "
msgstr ""
-#: authentication.pm:140
+#: authentication.pm:146
#, c-format
msgid "Use DNS to resolve KDCs for realms "
msgstr ""
-#: authentication.pm:145
+#: authentication.pm:151
#, fuzzy, c-format
msgid "Use local file for users information"
msgstr "啟用「libsafe」防護功能"
-#: authentication.pm:146
+#: authentication.pm:152
#, fuzzy, c-format
msgid "Use Ldap for users information"
msgstr "硬碟資訊"
-#: authentication.pm:152
+#: authentication.pm:158
#, c-format
msgid ""
"You have selected Kerberos 5 for authentication, now you must choose the "
"type of users information "
msgstr ""
-#: authentication.pm:158
+#: authentication.pm:164
#, c-format
msgid "Fecth base Dn "
msgstr ""
-#: authentication.pm:179
+#: authentication.pm:185
#, c-format
msgid ""
"You have selected NIS authentication. Please review the configuration "
"options below "
msgstr ""
-#: authentication.pm:181
+#: authentication.pm:187
#, c-format
msgid "NIS Domain"
msgstr "NIS 網域"
-#: authentication.pm:182
+#: authentication.pm:188
#, c-format
msgid "NIS Server"
msgstr "NIS 伺服器"
-#: authentication.pm:203
+#: authentication.pm:209
#, c-format
msgid ""
"You have selected Windows Domain authentication. Please review the "
"configuration options below "
msgstr ""
-#: authentication.pm:207
+#: authentication.pm:213
#, fuzzy, c-format
msgid "Domain Model "
msgstr "網域"
-#: authentication.pm:209
+#: authentication.pm:215
#, c-format
msgid "Active Directory Realm "
msgstr ""
-#: authentication.pm:225 authentication.pm:241
+#: authentication.pm:231 authentication.pm:247
#, c-format
msgid "Authentication"
msgstr "認證方式"
-#: authentication.pm:227
+#: authentication.pm:233
#, c-format
msgid "Authentication method"
msgstr "認證方式"
#. -PO: keep this short or else the buttons will not fit in the window
-#: authentication.pm:232
+#: authentication.pm:238
#, c-format
msgid "No password"
msgstr "沒有密碼"
-#: authentication.pm:253
+#: authentication.pm:259
#, c-format
msgid "This password is too short (it must be at least %d characters long)"
msgstr "這個密碼太短了 (至少要有 %d 個字元才行)"
-#: authentication.pm:358
+#: authentication.pm:364
#, c-format
msgid "Can not use broadcast with no NIS domain"
msgstr "沒有 NIS 網域無法使用廣播 (broadcast)"
-#: authentication.pm:873
+#: authentication.pm:879
#, c-format
msgid "Select file"
msgstr "選擇檔案"
-#: authentication.pm:879
+#: authentication.pm:885
#, fuzzy, c-format
msgid "Domain Windows for authentication : "
msgstr "需要 Domain 認證"
-#: authentication.pm:881
+#: authentication.pm:887
#, c-format
msgid "Domain Admin User Name"
msgstr "網域管理者名稱"
-#: authentication.pm:882
+#: authentication.pm:888
#, c-format
msgid "Domain Admin Password"
msgstr "網域管理者密碼"
#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:942
+#: bootloader.pm:925
#, c-format
msgid ""
"Welcome to the operating system chooser!\n"
@@ -1049,56 +1050,56 @@ msgstr ""
"wait for default boot.\n"
"\n"
-#: bootloader.pm:1110
+#: bootloader.pm:1093
#, c-format
msgid "LILO with text menu"
msgstr "LILO 文字介面選單"
-#: bootloader.pm:1111
+#: bootloader.pm:1094
#, c-format
msgid "GRUB with graphical menu"
msgstr "GRUB 圖形介面選單"
-#: bootloader.pm:1112
+#: bootloader.pm:1095
#, c-format
msgid "GRUB with text menu"
msgstr "GRUB 文字介面選單"
-#: bootloader.pm:1113
+#: bootloader.pm:1096
#, c-format
msgid "Yaboot"
msgstr "Yaboot"
-#: bootloader.pm:1114
+#: bootloader.pm:1097
#, c-format
msgid "SILO"
msgstr "SILO"
-#: bootloader.pm:1195
+#: bootloader.pm:1178
#, c-format
msgid "not enough room in /boot"
msgstr "/boot 沒有足夠的空間"
-#: bootloader.pm:1843
+#: bootloader.pm:1826
#, c-format
msgid "You can not install the bootloader on a %s partition\n"
msgstr "您無法把開機載入程式安裝在 %s 分割區上\n"
-#: bootloader.pm:1964
+#: bootloader.pm:1947
#, c-format
msgid ""
"Your bootloader configuration must be updated because partition has been "
"renumbered"
msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新"
-#: bootloader.pm:1977
+#: bootloader.pm:1960
#, c-format
msgid ""
"The bootloader can not be installed correctly. You have to boot rescue and "
"choose \"%s\""
msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\""
-#: bootloader.pm:1978
+#: bootloader.pm:1961
#, c-format
msgid "Re-install Boot Loader"
msgstr "重新安裝開機載入程式"
@@ -1143,7 +1144,7 @@ msgstr "1 分鐘"
msgid "%d seconds"
msgstr "%d 秒"
-#: common.pm:358
+#: common.pm:383
#, c-format
msgid "command %s missing"
msgstr "指令 %s 遺失"
@@ -1165,12 +1166,12 @@ msgstr ""
msgid "New"
msgstr "新增"
-#: diskdrake/dav.pm:61 diskdrake/interactive.pm:382 diskdrake/smbnfs_gtk.pm:75
+#: diskdrake/dav.pm:61 diskdrake/interactive.pm:407 diskdrake/smbnfs_gtk.pm:75
#, c-format
msgid "Unmount"
msgstr "卸載"
-#: diskdrake/dav.pm:62 diskdrake/interactive.pm:379 diskdrake/smbnfs_gtk.pm:76
+#: diskdrake/dav.pm:62 diskdrake/interactive.pm:403 diskdrake/smbnfs_gtk.pm:76
#, c-format
msgid "Mount"
msgstr "掛載"
@@ -1180,35 +1181,35 @@ msgstr "掛載"
msgid "Server"
msgstr "伺服器"
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:373
-#: diskdrake/interactive.pm:613 diskdrake/interactive.pm:631
-#: diskdrake/interactive.pm:635 diskdrake/removable.pm:23
+#: diskdrake/dav.pm:64 diskdrake/interactive.pm:397
+#: diskdrake/interactive.pm:639 diskdrake/interactive.pm:657
+#: diskdrake/interactive.pm:661 diskdrake/removable.pm:23
#: diskdrake/smbnfs_gtk.pm:79
#, c-format
msgid "Mount point"
msgstr "掛載點"
-#: diskdrake/dav.pm:65 diskdrake/interactive.pm:375
-#: diskdrake/interactive.pm:989 diskdrake/removable.pm:24
+#: diskdrake/dav.pm:65 diskdrake/interactive.pm:399
+#: diskdrake/interactive.pm:1045 diskdrake/removable.pm:24
#: diskdrake/smbnfs_gtk.pm:80
#, c-format
msgid "Options"
msgstr "選項"
-#: diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:174 diskdrake/removable.pm:26
+#: diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:183 diskdrake/removable.pm:26
#: diskdrake/smbnfs_gtk.pm:82 interactive/http.pm:151
#, c-format
msgid "Done"
msgstr "完成"
-#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:120 diskdrake/hd_gtk.pm:272
-#: diskdrake/interactive.pm:233 diskdrake/interactive.pm:246
-#: diskdrake/interactive.pm:480 diskdrake/interactive.pm:485
-#: diskdrake/interactive.pm:603 diskdrake/interactive.pm:861
-#: diskdrake/interactive.pm:1035 diskdrake/interactive.pm:1048
-#: diskdrake/interactive.pm:1051 diskdrake/interactive.pm:1300
+#: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:123 diskdrake/hd_gtk.pm:290
+#: diskdrake/interactive.pm:244 diskdrake/interactive.pm:257
+#: diskdrake/interactive.pm:506 diskdrake/interactive.pm:511
+#: diskdrake/interactive.pm:629 diskdrake/interactive.pm:915
+#: diskdrake/interactive.pm:1091 diskdrake/interactive.pm:1104
+#: diskdrake/interactive.pm:1107 diskdrake/interactive.pm:1375
#: diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:23 do_pkgs.pm:28 do_pkgs.pm:44
-#: do_pkgs.pm:60 do_pkgs.pm:65 fsedit.pm:222 interactive/http.pm:117
+#: do_pkgs.pm:60 do_pkgs.pm:65 fsedit.pm:237 interactive/http.pm:117
#: interactive/http.pm:118 modules/interactive.pm:19 scanner.pm:94
#: scanner.pm:105 scanner.pm:112 scanner.pm:119 wizards.pm:95 wizards.pm:99
#: wizards.pm:121
@@ -1231,18 +1232,18 @@ msgstr "URL 格式必須為 http:// 或是 https://"
msgid "Server: "
msgstr "伺服器："
-#: diskdrake/dav.pm:110 diskdrake/interactive.pm:453
-#: diskdrake/interactive.pm:1180 diskdrake/interactive.pm:1260
+#: diskdrake/dav.pm:110 diskdrake/interactive.pm:479
+#: diskdrake/interactive.pm:1250 diskdrake/interactive.pm:1335
#, c-format
msgid "Mount point: "
msgstr "掛載點："
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1267
+#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1342
#, c-format
msgid "Options: %s"
msgstr "選項： %s"
-#: diskdrake/hd_gtk.pm:54 diskdrake/interactive.pm:284
+#: diskdrake/hd_gtk.pm:54 diskdrake/interactive.pm:295
#: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:106
#: fs/partitioning_wizard.pm:51 fs/partitioning_wizard.pm:206
#: fs/partitioning_wizard.pm:211 fs/partitioning_wizard.pm:250
@@ -1256,34 +1257,34 @@ msgstr "分割磁區"
msgid "Click on a partition, choose a filesystem type then choose an action"
msgstr ""
-#: diskdrake/hd_gtk.pm:102 diskdrake/interactive.pm:1010
-#: diskdrake/interactive.pm:1020 diskdrake/interactive.pm:1073
+#: diskdrake/hd_gtk.pm:105 diskdrake/interactive.pm:1066
+#: diskdrake/interactive.pm:1076 diskdrake/interactive.pm:1129
#, c-format
msgid "Read carefully"
msgstr "仔細閱讀！"
-#: diskdrake/hd_gtk.pm:102
+#: diskdrake/hd_gtk.pm:105
#, c-format
msgid "Please make a backup of your data first"
msgstr "請您先備份您的資料"
-#: diskdrake/hd_gtk.pm:103 diskdrake/interactive.pm:226
+#: diskdrake/hd_gtk.pm:106 diskdrake/interactive.pm:237
#, c-format
msgid "Exit"
msgstr "離開"
-#: diskdrake/hd_gtk.pm:103
+#: diskdrake/hd_gtk.pm:106
#, c-format
msgid "Continue"
msgstr "繼續"
-#: diskdrake/hd_gtk.pm:170 interactive.pm:649 interactive/gtk.pm:781
-#: interactive/gtk.pm:797 interactive/gtk.pm:815 ugtk2.pm:933 ugtk2.pm:934
+#: diskdrake/hd_gtk.pm:178 interactive.pm:650 interactive/gtk.pm:789
+#: interactive/gtk.pm:807 interactive/gtk.pm:828 ugtk2.pm:938
#, c-format
msgid "Help"
msgstr "輔助說明"
-#: diskdrake/hd_gtk.pm:208
+#: diskdrake/hd_gtk.pm:224
#, c-format
msgid ""
"You have one big Microsoft Windows partition.\n"
@@ -1294,110 +1295,110 @@ msgstr ""
"建議您先重新改變這個分割區的大小\n"
"(點選它，然後按 \"重新改變大小\")"
-#: diskdrake/hd_gtk.pm:210
+#: diskdrake/hd_gtk.pm:226
#, c-format
msgid "Please click on a partition"
msgstr "請點選一個分割區"
-#: diskdrake/hd_gtk.pm:224 diskdrake/smbnfs_gtk.pm:63
+#: diskdrake/hd_gtk.pm:240 diskdrake/smbnfs_gtk.pm:63
#, c-format
msgid "Details"
msgstr "詳細資訊"
-#: diskdrake/hd_gtk.pm:272
+#: diskdrake/hd_gtk.pm:290
#, c-format
msgid "No hard drives found"
msgstr "找不到硬碟裝置"
-#: diskdrake/hd_gtk.pm:299
+#: diskdrake/hd_gtk.pm:317
#, c-format
msgid "Unknown"
msgstr "未知的"
-#: diskdrake/hd_gtk.pm:361
+#: diskdrake/hd_gtk.pm:379
#, c-format
msgid "Ext3"
msgstr "Ext3"
-#: diskdrake/hd_gtk.pm:361
+#: diskdrake/hd_gtk.pm:379
#, c-format
msgid "XFS"
msgstr "XFS"
-#: diskdrake/hd_gtk.pm:361
+#: diskdrake/hd_gtk.pm:379
#, c-format
msgid "Swap"
msgstr "Swap"
-#: diskdrake/hd_gtk.pm:361
+#: diskdrake/hd_gtk.pm:379
#, c-format
msgid "SunOS"
msgstr "SunOS"
-#: diskdrake/hd_gtk.pm:361
+#: diskdrake/hd_gtk.pm:379
#, c-format
msgid "HFS"
msgstr "HFS"
-#: diskdrake/hd_gtk.pm:361
+#: diskdrake/hd_gtk.pm:379
#, c-format
msgid "Windows"
msgstr "Windows"
-#: diskdrake/hd_gtk.pm:362 services.pm:158
+#: diskdrake/hd_gtk.pm:380 services.pm:158
#, c-format
msgid "Other"
msgstr "其他"
-#: diskdrake/hd_gtk.pm:362 diskdrake/interactive.pm:1195
+#: diskdrake/hd_gtk.pm:380 diskdrake/interactive.pm:1265
#, c-format
msgid "Empty"
msgstr "空白"
-#: diskdrake/hd_gtk.pm:369
+#: diskdrake/hd_gtk.pm:387
#, c-format
msgid "Filesystem types:"
msgstr "檔案系統格式："
-#: diskdrake/hd_gtk.pm:390 diskdrake/interactive.pm:289
-#: diskdrake/interactive.pm:361 diskdrake/interactive.pm:510
-#: diskdrake/interactive.pm:694 diskdrake/interactive.pm:752
-#: diskdrake/interactive.pm:841 diskdrake/interactive.pm:883
-#: diskdrake/interactive.pm:884 diskdrake/interactive.pm:1118
-#: diskdrake/interactive.pm:1156 diskdrake/interactive.pm:1299 do_pkgs.pm:19
+#: diskdrake/hd_gtk.pm:408 diskdrake/interactive.pm:300
+#: diskdrake/interactive.pm:385 diskdrake/interactive.pm:536
+#: diskdrake/interactive.pm:720 diskdrake/interactive.pm:778
+#: diskdrake/interactive.pm:895 diskdrake/interactive.pm:937
+#: diskdrake/interactive.pm:938 diskdrake/interactive.pm:1188
+#: diskdrake/interactive.pm:1226 diskdrake/interactive.pm:1374 do_pkgs.pm:19
#: do_pkgs.pm:39 do_pkgs.pm:57 harddrake/sound.pm:422
#, c-format
msgid "Warning"
msgstr "警告"
-#: diskdrake/hd_gtk.pm:390
+#: diskdrake/hd_gtk.pm:408
#, c-format
msgid "This partition is already empty"
msgstr "這個分割區已經是空白的了"
-#: diskdrake/hd_gtk.pm:399
+#: diskdrake/hd_gtk.pm:417
#, c-format
msgid "Use ``Unmount'' first"
msgstr "要先 ``Unmount''"
-#: diskdrake/hd_gtk.pm:399
+#: diskdrake/hd_gtk.pm:417
#, c-format
msgid "Use ``%s'' instead (in expert mode)"
msgstr "用 ``%s'' 代替 (在專家模式)"
-#: diskdrake/hd_gtk.pm:399 diskdrake/interactive.pm:374
-#: diskdrake/interactive.pm:548 diskdrake/interactive.pm:1026
-#: diskdrake/removable.pm:25 diskdrake/removable.pm:48
+#: diskdrake/hd_gtk.pm:417 diskdrake/interactive.pm:398
+#: diskdrake/interactive.pm:574 diskdrake/removable.pm:25
+#: diskdrake/removable.pm:48
#, c-format
msgid "Type"
msgstr "格式"
-#: diskdrake/interactive.pm:197
+#: diskdrake/interactive.pm:208
#, c-format
msgid "Choose another partition"
msgstr "選擇另一個分割區"
-#: diskdrake/interactive.pm:197
+#: diskdrake/interactive.pm:208
#, c-format
msgid "Choose a partition"
msgstr "選擇一個分割區"
@@ -1414,32 +1415,32 @@ msgstr "更多"
msgid "Confirmation"
msgstr "確認"
-#: diskdrake/interactive.pm:267
+#: diskdrake/interactive.pm:278
#, c-format
msgid "Continue anyway?"
msgstr "無論如何都要繼續嗎？"
-#: diskdrake/interactive.pm:272
+#: diskdrake/interactive.pm:283
#, c-format
msgid "Quit without saving"
msgstr "不儲存就離開"
-#: diskdrake/interactive.pm:272
+#: diskdrake/interactive.pm:283
#, c-format
msgid "Quit without writing the partition table?"
msgstr "放棄寫入硬碟分割表就離開？"
-#: diskdrake/interactive.pm:277
+#: diskdrake/interactive.pm:288
#, c-format
msgid "Do you want to save /etc/fstab modifications"
msgstr "您想要儲存對 /etc/fstab 檔案的修改嗎？"
-#: diskdrake/interactive.pm:284 fs/partitioning_wizard.pm:250
+#: diskdrake/interactive.pm:295 fs/partitioning_wizard.pm:250
#, c-format
msgid "You need to reboot for the partition table modifications to take place"
msgstr "您必須重新開機以使更動過的硬碟分割表生效"
-#: diskdrake/interactive.pm:289
+#: diskdrake/interactive.pm:300
#, c-format
msgid ""
"You should format partition %s.\n"
@@ -1450,12 +1451,12 @@ msgstr ""
"否則掛載點 %s 的資訊將不會寫入 fstab 中。\n"
"仍然要離開嗎？"
-#: diskdrake/interactive.pm:302
+#: diskdrake/interactive.pm:313
#, c-format
msgid "Clear all"
msgstr "全部清除"
-#: diskdrake/interactive.pm:303
+#: diskdrake/interactive.pm:314
#, c-format
msgid "Auto allocate"
msgstr "自動分配"
@@ -1475,49 +1476,49 @@ msgstr "切換到專家模式"
msgid "Hard drive information"
msgstr "硬碟資訊"
-#: diskdrake/interactive.pm:341
+#: diskdrake/interactive.pm:365
#, c-format
msgid "All primary partitions are used"
msgstr "主分割區數目已經全被用了"
-#: diskdrake/interactive.pm:342
+#: diskdrake/interactive.pm:366
#, c-format
msgid "I can not add any more partitions"
msgstr "我無法再新增任何分割區了"
-#: diskdrake/interactive.pm:343
+#: diskdrake/interactive.pm:367
#, c-format
msgid ""
"To have more partitions, please delete one to be able to create an extended "
"partition"
msgstr "需要有更多的分割區的話，請刪除一個主分割區以建立延伸分割區"
-#: diskdrake/interactive.pm:354
+#: diskdrake/interactive.pm:378
#, c-format
msgid "Reload partition table"
msgstr "重新載入硬碟分割表"
-#: diskdrake/interactive.pm:361
+#: diskdrake/interactive.pm:385
#, c-format
msgid "Detailed information"
msgstr "詳細資訊"
-#: diskdrake/interactive.pm:377 diskdrake/interactive.pm:707
+#: diskdrake/interactive.pm:401 diskdrake/interactive.pm:733
#, c-format
msgid "Resize"
msgstr "重新變更大小"
-#: diskdrake/interactive.pm:378
+#: diskdrake/interactive.pm:402
#, c-format
msgid "Format"
msgstr "格式化"
-#: diskdrake/interactive.pm:380 diskdrake/interactive.pm:793
+#: diskdrake/interactive.pm:404 diskdrake/interactive.pm:843
#, c-format
msgid "Add to RAID"
msgstr "加入到磁碟陣列"
-#: diskdrake/interactive.pm:381 diskdrake/interactive.pm:811
+#: diskdrake/interactive.pm:405 diskdrake/interactive.pm:861
#, c-format
msgid "Add to LVM"
msgstr "加入到 LVM"
@@ -1532,12 +1533,12 @@ msgstr "使用者 ID"
msgid "Delete"
msgstr "刪除"
-#: diskdrake/interactive.pm:384
+#: diskdrake/interactive.pm:409
#, c-format
msgid "Remove from RAID"
msgstr "由磁碟陣列中移除"
-#: diskdrake/interactive.pm:385
+#: diskdrake/interactive.pm:410
#, c-format
msgid "Remove from LVM"
msgstr "由 LVM 中移除"
@@ -1552,47 +1553,47 @@ msgstr "由 LVM 中移除"
msgid "Modify RAID"
msgstr "變更磁碟陣列"
-#: diskdrake/interactive.pm:387
+#: diskdrake/interactive.pm:413
#, c-format
msgid "Use for loopback"
msgstr "作為 loopback"
-#: diskdrake/interactive.pm:398
+#: diskdrake/interactive.pm:424
#, c-format
msgid "Create"
msgstr "建立"
-#: diskdrake/interactive.pm:442 diskdrake/interactive.pm:444
+#: diskdrake/interactive.pm:468 diskdrake/interactive.pm:470
#, c-format
msgid "Create a new partition"
msgstr "建立新的分割區"
-#: diskdrake/interactive.pm:446
+#: diskdrake/interactive.pm:472
#, c-format
msgid "Start sector: "
msgstr "開始的磁區："
-#: diskdrake/interactive.pm:449 diskdrake/interactive.pm:876
+#: diskdrake/interactive.pm:475 diskdrake/interactive.pm:930
#, c-format
msgid "Size in MB: "
msgstr "大小 (MB)："
-#: diskdrake/interactive.pm:451 diskdrake/interactive.pm:877
+#: diskdrake/interactive.pm:477 diskdrake/interactive.pm:931
#, c-format
msgid "Filesystem type: "
msgstr "檔案系統格式："
-#: diskdrake/interactive.pm:457
+#: diskdrake/interactive.pm:483
#, c-format
msgid "Preference: "
msgstr "偏好設定："
-#: diskdrake/interactive.pm:460
+#: diskdrake/interactive.pm:486
#, c-format
msgid "Logical volume name "
msgstr "邏輯磁區名稱"
-#: diskdrake/interactive.pm:480
+#: diskdrake/interactive.pm:506
#, c-format
msgid ""
"You can not create a new partition\n"
@@ -1603,53 +1604,53 @@ msgstr ""
"(因為您已經達到主分割區的最大值)。\n"
"您需要先移除一個主分割區然後建立一個延伸分割區。"
-#: diskdrake/interactive.pm:510
+#: diskdrake/interactive.pm:536
#, c-format
msgid "Remove the loopback file?"
msgstr "移除 loopback 檔案？"
-#: diskdrake/interactive.pm:532
+#: diskdrake/interactive.pm:558
#, c-format
msgid ""
"After changing type of partition %s, all data on this partition will be lost"
msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"
-#: diskdrake/interactive.pm:545
+#: diskdrake/interactive.pm:571
#, c-format
msgid "Change partition type"
msgstr "改變分割區格式"
-#: diskdrake/interactive.pm:547 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:573 diskdrake/removable.pm:47
#, c-format
msgid "Which filesystem do you want?"
msgstr "您要用那一種檔案系統？"
-#: diskdrake/interactive.pm:554
+#: diskdrake/interactive.pm:580
#, c-format
msgid "Switching from %s to %s"
msgstr "正在由 %s 切換至 %s"
-#: diskdrake/interactive.pm:580 diskdrake/interactive.pm:583
+#: diskdrake/interactive.pm:606 diskdrake/interactive.pm:609
#, c-format
msgid "Which volume label?"
msgstr "哪一個磁區標籤？"
-#: diskdrake/interactive.pm:584
+#: diskdrake/interactive.pm:610
#, c-format
msgid "Label:"
msgstr "標籤："
-#: diskdrake/interactive.pm:598
+#: diskdrake/interactive.pm:624
#, c-format
msgid "Where do you want to mount the loopback file %s?"
msgstr "您要把 loopback 檔案 %s 掛載在那裡？"
-#: diskdrake/interactive.pm:599
+#: diskdrake/interactive.pm:625
#, c-format
msgid "Where do you want to mount device %s?"
msgstr "您要把這個裝置 %s 掛載在那裡？"
-#: diskdrake/interactive.pm:604
+#: diskdrake/interactive.pm:630
#, c-format
msgid ""
"Can not unset mount point as this partition is used for loop back.\n"
@@ -1658,58 +1659,58 @@ msgstr ""
"因為這個分割區被用作 loop back 使用，所以無法解除\n"
"這個掛載點。請先取消 loopback 的設定"
-#: diskdrake/interactive.pm:634
+#: diskdrake/interactive.pm:660
#, c-format
msgid "Where do you want to mount %s?"
msgstr "您要將 %s 掛載在那裡？"
-#: diskdrake/interactive.pm:658 diskdrake/interactive.pm:741
+#: diskdrake/interactive.pm:684 diskdrake/interactive.pm:767
#: fs/partitioning_wizard.pm:146 fs/partitioning_wizard.pm:178
#, c-format
msgid "Resizing"
msgstr "正在重設大小"
-#: diskdrake/interactive.pm:658
+#: diskdrake/interactive.pm:684
#, c-format
msgid "Computing FAT filesystem bounds"
msgstr "正在計算 FAT 分割區的邊界"
-#: diskdrake/interactive.pm:694
+#: diskdrake/interactive.pm:720
#, c-format
msgid "This partition is not resizeable"
msgstr "這個分割區無法重新調整大小"
-#: diskdrake/interactive.pm:699
+#: diskdrake/interactive.pm:725
#, c-format
msgid "All data on this partition should be backed-up"
msgstr "所有在這個分割區上的資料都應該先經過備份"
-#: diskdrake/interactive.pm:701
+#: diskdrake/interactive.pm:727
#, c-format
msgid "After resizing partition %s, all data on this partition will be lost"
msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失"
-#: diskdrake/interactive.pm:708
+#: diskdrake/interactive.pm:734
#, c-format
msgid "Choose the new size"
msgstr "選取新的大小"
-#: diskdrake/interactive.pm:709
+#: diskdrake/interactive.pm:735
#, c-format
msgid "New size in MB: "
msgstr "新大小 (MB)："
-#: diskdrake/interactive.pm:710
+#: diskdrake/interactive.pm:736
#, c-format
msgid "Minimum size: %s MB"
msgstr "最小容量：%s MB"
-#: diskdrake/interactive.pm:711
+#: diskdrake/interactive.pm:737
#, c-format
msgid "Maximum size: %s MB"
msgstr "最大容量：%s MB"
-#: diskdrake/interactive.pm:752 fs/partitioning_wizard.pm:186
+#: diskdrake/interactive.pm:778 fs/partitioning_wizard.pm:186
#, c-format
msgid ""
"To ensure data integrity after resizing the partition(s), \n"
@@ -1743,22 +1744,22 @@ msgstr ""
msgid "Choose an existing RAID to add to"
msgstr "選取一存在的磁碟陣列加入到"
-#: diskdrake/interactive.pm:795 diskdrake/interactive.pm:813
+#: diskdrake/interactive.pm:845 diskdrake/interactive.pm:863
#, c-format
msgid "new"
msgstr "新增"
-#: diskdrake/interactive.pm:811
+#: diskdrake/interactive.pm:861
#, c-format
msgid "Choose an existing LVM to add to"
msgstr "選取一個已經存在的 LVM 以加入"
-#: diskdrake/interactive.pm:818
+#: diskdrake/interactive.pm:868
#, c-format
msgid "LVM name?"
msgstr "LVM 名稱？"
-#: diskdrake/interactive.pm:841
+#: diskdrake/interactive.pm:895
#, c-format
msgid ""
"Physical volume %s is still in use.\n"
@@ -1767,87 +1768,87 @@ msgstr ""
"實體磁區 %s 仍然在使用中。\n"
"您要把位於這個磁區的實體延伸移到另一個磁區嗎？"
-#: diskdrake/interactive.pm:843
+#: diskdrake/interactive.pm:897
#, c-format
msgid "Moving physical extents"
msgstr "移動實體延伸"
-#: diskdrake/interactive.pm:861
+#: diskdrake/interactive.pm:915
#, c-format
msgid "This partition can not be used for loopback"
msgstr "這個分割區不能用來作為 loopback"
-#: diskdrake/interactive.pm:874
+#: diskdrake/interactive.pm:928
#, c-format
msgid "Loopback"
msgstr "Loopback"
-#: diskdrake/interactive.pm:875
+#: diskdrake/interactive.pm:929
#, c-format
msgid "Loopback file name: "
msgstr "Loopback 檔案名稱："
-#: diskdrake/interactive.pm:880
+#: diskdrake/interactive.pm:934
#, c-format
msgid "Give a file name"
msgstr "輸入一個檔案名稱"
-#: diskdrake/interactive.pm:883
+#: diskdrake/interactive.pm:937
#, c-format
msgid "File is already used by another loopback, choose another one"
msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案"
-#: diskdrake/interactive.pm:884
+#: diskdrake/interactive.pm:938
#, c-format
msgid "File already exists. Use it?"
msgstr "檔案已經存在了。要使用它嗎？"
-#: diskdrake/interactive.pm:916 diskdrake/interactive.pm:919
+#: diskdrake/interactive.pm:970 diskdrake/interactive.pm:973
#, c-format
msgid "Mount options"
msgstr "掛載參數"
-#: diskdrake/interactive.pm:926
+#: diskdrake/interactive.pm:980
#, c-format
msgid "Various"
msgstr "各種的"
-#: diskdrake/interactive.pm:991
+#: diskdrake/interactive.pm:1047
#, c-format
msgid "device"
msgstr "裝置"
-#: diskdrake/interactive.pm:992
+#: diskdrake/interactive.pm:1048
#, c-format
msgid "level"
msgstr "階層"
-#: diskdrake/interactive.pm:993
+#: diskdrake/interactive.pm:1049
#, c-format
msgid "chunk size in KiB"
msgstr "組塊大小以 KiB 計量"
-#: diskdrake/interactive.pm:1011
+#: diskdrake/interactive.pm:1067
#, c-format
msgid "Be careful: this operation is dangerous."
msgstr "請小心：這個動作很危險。"
-#: diskdrake/interactive.pm:1026
+#: diskdrake/interactive.pm:1082
#, fuzzy, c-format
msgid "Partitioning Type"
msgstr "分割磁區"
-#: diskdrake/interactive.pm:1026
+#: diskdrake/interactive.pm:1082
#, c-format
msgid "What type of partitioning?"
msgstr "以那種形式分割？"
-#: diskdrake/interactive.pm:1064
+#: diskdrake/interactive.pm:1120
#, c-format
msgid "You'll need to reboot before the modification can take place"
msgstr "您需要重新開機以便於讓異動的設定生效"
-#: diskdrake/interactive.pm:1073
+#: diskdrake/interactive.pm:1129
#, c-format
msgid "Partition table of drive %s is going to be written to disk"
msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！"
@@ -1862,22 +1863,22 @@ msgstr "正在格式化分割區 %s"
msgid "After formatting partition %s, all data on this partition will be lost"
msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失"
-#: diskdrake/interactive.pm:1103 fs/partitioning.pm:48
+#: diskdrake/interactive.pm:1173 fs/partitioning.pm:48
#, c-format
msgid "Check bad blocks?"
msgstr "檢查壞掉的區塊？"
-#: diskdrake/interactive.pm:1117
+#: diskdrake/interactive.pm:1187
#, c-format
msgid "Move files to the new partition"
msgstr "將檔案搬移到新的分割區"
-#: diskdrake/interactive.pm:1117
+#: diskdrake/interactive.pm:1187
#, c-format
msgid "Hide files"
msgstr "隱藏檔案"
-#: diskdrake/interactive.pm:1118
+#: diskdrake/interactive.pm:1188
#, c-format
msgid ""
"Directory %s already contains data\n"
@@ -1893,103 +1894,103 @@ msgstr ""
"您可以選擇把檔案移入要掛載到此的磁區中，或者把它們留在原地 (這會讓它們隱藏起"
"來，而目錄中顯示出來的會是掛載上的磁區內容)"
-#: diskdrake/interactive.pm:1133
+#: diskdrake/interactive.pm:1203
#, c-format
msgid "Moving files to the new partition"
msgstr "正在將檔案搬移到新的分割區"
-#: diskdrake/interactive.pm:1137
+#: diskdrake/interactive.pm:1207
#, c-format
msgid "Copying %s"
msgstr "正在複製 %s"
-#: diskdrake/interactive.pm:1141
+#: diskdrake/interactive.pm:1211
#, c-format
msgid "Removing %s"
msgstr "正在移除 %s"
-#: diskdrake/interactive.pm:1155
+#: diskdrake/interactive.pm:1225
#, c-format
msgid "partition %s is now known as %s"
msgstr "分割區 %s 現在被命名為 %s 了"
-#: diskdrake/interactive.pm:1156
+#: diskdrake/interactive.pm:1226
#, c-format
msgid "Partitions have been renumbered: "
msgstr "分割區已經重新編號："
-#: diskdrake/interactive.pm:1181 diskdrake/interactive.pm:1244
+#: diskdrake/interactive.pm:1251 diskdrake/interactive.pm:1319
#, c-format
msgid "Device: "
msgstr "裝置："
-#: diskdrake/interactive.pm:1182
+#: diskdrake/interactive.pm:1252
#, c-format
msgid "Volume label: "
msgstr "磁區標籤："
-#: diskdrake/interactive.pm:1183
+#: diskdrake/interactive.pm:1253
#, c-format
msgid "UUID: "
msgstr "UUID:"
-#: diskdrake/interactive.pm:1184
+#: diskdrake/interactive.pm:1254
#, c-format
msgid "DOS drive letter: %s (just a guess)\n"
msgstr "DOS 磁碟代號：%s (猜測值)\n"
-#: diskdrake/interactive.pm:1188 diskdrake/interactive.pm:1197
-#: diskdrake/interactive.pm:1263
+#: diskdrake/interactive.pm:1258 diskdrake/interactive.pm:1267
+#: diskdrake/interactive.pm:1338
#, c-format
msgid "Type: "
msgstr "格式："
-#: diskdrake/interactive.pm:1192 diskdrake/interactive.pm:1248
+#: diskdrake/interactive.pm:1262 diskdrake/interactive.pm:1323
#, c-format
msgid "Name: "
msgstr "名稱："
-#: diskdrake/interactive.pm:1199
+#: diskdrake/interactive.pm:1269
#, c-format
msgid "Start: sector %s\n"
msgstr "始於：第 %s 扇區\n"
-#: diskdrake/interactive.pm:1200
+#: diskdrake/interactive.pm:1270
#, c-format
msgid "Size: %s"
msgstr "大小：%s"
-#: diskdrake/interactive.pm:1202
+#: diskdrake/interactive.pm:1272
#, c-format
msgid ", %s sectors"
msgstr "，%s 扇區"
-#: diskdrake/interactive.pm:1204
+#: diskdrake/interactive.pm:1274
#, c-format
msgid "Cylinder %d to %d\n"
msgstr "%d 磁柱到第 %d 磁柱\n"
-#: diskdrake/interactive.pm:1205
+#: diskdrake/interactive.pm:1275
#, c-format
msgid "Number of logical extents: %d\n"
msgstr "邏輯延伸的數目：%d\n"
-#: diskdrake/interactive.pm:1206
+#: diskdrake/interactive.pm:1276
#, c-format
msgid "Formatted\n"
msgstr "已格式化\n"
-#: diskdrake/interactive.pm:1207
+#: diskdrake/interactive.pm:1277
#, c-format
msgid "Not formatted\n"
msgstr "未格式化\n"
-#: diskdrake/interactive.pm:1208
+#: diskdrake/interactive.pm:1278
#, c-format
msgid "Mounted\n"
msgstr "已掛載\n"
-#: diskdrake/interactive.pm:1209
+#: diskdrake/interactive.pm:1279
#, c-format
msgid "RAID %s\n"
msgstr "磁碟陣列 %s\n"
@@ -2023,7 +2024,7 @@ msgstr ""
"loopback 檔案：\n"
" %s\n"
-#: diskdrake/interactive.pm:1215
+#: diskdrake/interactive.pm:1290
#, c-format
msgid ""
"Partition booted by default\n"
@@ -2032,27 +2033,27 @@ msgstr ""
"預設開機的分割區\n"
" (給 MS-DOS 開機程式用的，跟 lilo 無關)\n"
-#: diskdrake/interactive.pm:1217
+#: diskdrake/interactive.pm:1292
#, c-format
msgid "Level %s\n"
msgstr "階層 %s\n"
-#: diskdrake/interactive.pm:1218
+#: diskdrake/interactive.pm:1293
#, c-format
msgid "Chunk size %d KiB\n"
msgstr "組塊大小 %d KiB\n"
-#: diskdrake/interactive.pm:1219
+#: diskdrake/interactive.pm:1294
#, c-format
msgid "RAID-disks %s\n"
msgstr "磁碟陣列-磁碟 %s\n"
-#: diskdrake/interactive.pm:1221
+#: diskdrake/interactive.pm:1296
#, c-format
msgid "Loopback file name: %s"
msgstr "Loopback 檔案名稱： %s"
-#: diskdrake/interactive.pm:1224
+#: diskdrake/interactive.pm:1299
#, c-format
msgid ""
"\n"
@@ -2065,7 +2066,7 @@ msgstr ""
"是透過驅動程式產生出來的\n"
"您應該不要去異動這個分割區資料。\n"
-#: diskdrake/interactive.pm:1227
+#: diskdrake/interactive.pm:1302
#, c-format
msgid ""
"\n"
@@ -2077,42 +2078,42 @@ msgstr ""
"這個特殊分割區是用來作為\n"
"雙重開機使用的。\n"
-#: diskdrake/interactive.pm:1236
+#: diskdrake/interactive.pm:1311
#, c-format
msgid "Free space on %s (%s)"
msgstr ""
-#: diskdrake/interactive.pm:1245
+#: diskdrake/interactive.pm:1320
#, c-format
msgid "Read-only"
msgstr "唯讀"
-#: diskdrake/interactive.pm:1246
+#: diskdrake/interactive.pm:1321
#, c-format
msgid "Size: %s\n"
msgstr "大小：%s\n"
-#: diskdrake/interactive.pm:1247
+#: diskdrake/interactive.pm:1322
#, c-format
msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n"
-#: diskdrake/interactive.pm:1249
+#: diskdrake/interactive.pm:1324
#, c-format
msgid "Medium type: "
msgstr "媒體型式："
-#: diskdrake/interactive.pm:1250
+#: diskdrake/interactive.pm:1325
#, c-format
msgid "LVM-disks %s\n"
msgstr "LVM-磁碟 %s\n"
-#: diskdrake/interactive.pm:1251
+#: diskdrake/interactive.pm:1326
#, c-format
msgid "Partition table type: %s\n"
msgstr "硬碟分割表形式：%s\n"
-#: diskdrake/interactive.pm:1252
+#: diskdrake/interactive.pm:1327
#, c-format
msgid "on channel %d id %d\n"
msgstr "位在通道 %d id %d\n"
@@ -2122,12 +2123,12 @@ msgstr "位在通道 %d id %d\n"
msgid "Choose your filesystem encryption key"
msgstr "選擇您檔案系統所使用的加密金鑰"
-#: diskdrake/interactive.pm:1299
+#: diskdrake/interactive.pm:1374
#, c-format
msgid "This encryption key is too simple (must be at least %d characters long)"
msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"
-#: diskdrake/interactive.pm:1300
+#: diskdrake/interactive.pm:1375
#, c-format
msgid "The encryption keys do not match"
msgstr "輸入的加密金鑰不符合"
@@ -2137,7 +2138,7 @@ msgstr "輸入的加密金鑰不符合"
msgid "Encryption key (again)"
msgstr "再次輸入加密金鑰"
-#: diskdrake/interactive.pm:1306
+#: diskdrake/interactive.pm:1381
#, c-format
msgid "Encryption algorithm"
msgstr "加密演算法"
@@ -2147,10 +2148,10 @@ msgstr "加密演算法"
msgid "Change type"
msgstr "改變分割區格式"
-#: diskdrake/smbnfs_gtk.pm:81 interactive.pm:129 interactive.pm:546
+#: diskdrake/smbnfs_gtk.pm:81 interactive.pm:129 interactive.pm:547
#: interactive/curses.pm:260 interactive/http.pm:104 interactive/http.pm:160
-#: interactive/stdio.pm:39 interactive/stdio.pm:148 ugtk2.pm:415 ugtk2.pm:517
-#: ugtk2.pm:526 ugtk2.pm:813
+#: interactive/stdio.pm:39 interactive/stdio.pm:148 ugtk2.pm:417 ugtk2.pm:519
+#: ugtk2.pm:528 ugtk2.pm:814
#, c-format
msgid "Cancel"
msgstr "取消"
@@ -2226,7 +2227,7 @@ msgstr "需要安裝下列套件：\n"
msgid "Installing packages..."
msgstr "正在安裝套件..."
-#: do_pkgs.pm:267
+#: do_pkgs.pm:267 pkgs.pm:258
#, c-format
msgid "Removing packages..."
msgstr "正在移除套件..."
@@ -2280,7 +2281,7 @@ msgstr "正在將 %s 分割區掛載於 %s 目錄時失敗"
msgid "Checking %s"
msgstr "檢查 %s"
-#: fs/mount.pm:119 partition_table.pm:403
+#: fs/mount.pm:119 partition_table.pm:404
#, c-format
msgid "error unmounting %s: %s"
msgstr "卸下 %s 的掛載時發生錯誤：%s"
@@ -2568,8 +2569,8 @@ msgstr ""
"當您確定之後，請按下%s。"
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: fs/partitioning_wizard.pm:165 interactive.pm:545 interactive/curses.pm:263
-#: ugtk2.pm:519
+#: fs/partitioning_wizard.pm:165 interactive.pm:546 interactive/curses.pm:263
+#: ugtk2.pm:521
#, c-format
msgid "Next"
msgstr "下一步"
@@ -2619,7 +2620,7 @@ msgstr "清除並使用整個磁碟"
msgid "You have more than one hard drive, which one do you install linux on?"
msgstr "您有多個硬碟，您打算用那一個來安裝 linux？"
-#: fs/partitioning_wizard.pm:210 fsedit.pm:570
+#: fs/partitioning_wizard.pm:210 fsedit.pm:590
#, c-format
msgid "ALL existing partitions and their data will be lost on drive %s"
msgstr "所有在 %s 磁碟上的已經存在的分割區跟他們的資料都將會遺失"
@@ -2658,12 +2659,12 @@ msgstr "DrakX 分割精靈找到了下列方案："
msgid "Partitioning failed: %s"
msgstr "硬碟分割失敗：%s"
-#: fs/type.pm:370
+#: fs/type.pm:378
#, c-format
msgid "You can not use JFS for partitions smaller than 16MB"
msgstr "小於 16MB 的分割區不能使用 JFS 格式"
-#: fs/type.pm:371
+#: fs/type.pm:379
#, c-format
msgid "You can not use ReiserFS for partitions smaller than 32MB"
msgstr "小於 32MB 的分割區不能使用 ReiserFS 格式"
@@ -2683,12 +2684,12 @@ msgstr "將 /usr 分別掛載"
msgid "server"
msgstr "伺服器"
-#: fsedit.pm:116
+#: fsedit.pm:131
#, c-format
msgid "BIOS software RAID detected on disks %s. Activate it?"
msgstr "在磁碟機 %s 偵測到 BIOS 軟體 RAID。要啟用嗎？"
-#: fsedit.pm:223
+#: fsedit.pm:238
#, c-format
msgid ""
"I can not read the partition table of device %s, it's too corrupted for me :"
@@ -2706,22 +2707,22 @@ msgstr ""
"\n"
"您同意要清除所有的分割區嗎？\n"
-#: fsedit.pm:397
+#: fsedit.pm:415
#, c-format
msgid "Mount points must begin with a leading /"
msgstr "掛載點必需以 / 開頭"
-#: fsedit.pm:398
+#: fsedit.pm:416
#, c-format
msgid "Mount points should contain only alphanumerical characters"
msgstr "掛載點應該只有包含英文字母與數字與底線這類字元"
-#: fsedit.pm:399
+#: fsedit.pm:417
#, c-format
msgid "There is already a partition with mount point %s\n"
msgstr "已經有分割區分配到掛載點 %s 了\n"
-#: fsedit.pm:403
+#: fsedit.pm:421
#, c-format
msgid ""
"You've selected a software RAID partition as root (/).\n"
@@ -2732,14 +2733,14 @@ msgstr ""
"但開機載入程式無法處理這種 /boot 目錄不位於實體分割區的情況。\n"
"請確定會新增一個掛載於實體分割區的 /boot 目錄"
-#: fsedit.pm:409
+#: fsedit.pm:427
#, c-format
msgid ""
"You can not use the LVM Logical Volume for mount point %s since it spans "
"physical volumes"
msgstr "您不能使用 LVM 邏輯磁區來作為 %s 的掛載點，因為它跨越了實體磁區"
-#: fsedit.pm:411
+#: fsedit.pm:429
#, c-format
msgid ""
"You've selected the LVM Logical Volume as root (/).\n"
@@ -2751,12 +2752,12 @@ msgstr ""
"但開機載入程式無法在這個磁區跨越了實體磁區的情況下運作。\n"
"您應該先建立一個 /boot 分割區"
-#: fsedit.pm:415 fsedit.pm:417
+#: fsedit.pm:433 fsedit.pm:435
#, c-format
msgid "This directory should remain within the root filesystem"
msgstr "這個目錄應該放在根檔案系統 (/) 才對"
-#: fsedit.pm:419 fsedit.pm:421
+#: fsedit.pm:437 fsedit.pm:439
#, c-format
msgid ""
"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
@@ -2764,17 +2765,17 @@ msgid ""
msgstr ""
"您需要一個真正的檔案系統 (ext2/ext3、reiserfs、xfs 或是 jfs) 來放這個掛載點\n"
-#: fsedit.pm:423
+#: fsedit.pm:441
#, c-format
msgid "You can not use an encrypted file system for mount point %s"
msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點"
-#: fsedit.pm:487
+#: fsedit.pm:506
#, c-format
msgid "Not enough free space for auto-allocating"
msgstr "沒有足夠的空間來進行自動配置"
-#: fsedit.pm:489
+#: fsedit.pm:508
#, c-format
msgid "Nothing to do"
msgstr "沒有做任何動作"
@@ -3285,55 +3286,55 @@ msgstr "介面卡型號："
msgid "Tuner type:"
msgstr "調頻類型："
-#: interactive.pm:128 interactive.pm:545 interactive/curses.pm:263
+#: interactive.pm:128 interactive.pm:546 interactive/curses.pm:263
#: interactive/http.pm:103 interactive/http.pm:156 interactive/stdio.pm:39
-#: interactive/stdio.pm:148 interactive/stdio.pm:149 ugtk2.pm:421 ugtk2.pm:519
-#: ugtk2.pm:813 ugtk2.pm:836
+#: interactive/stdio.pm:148 interactive/stdio.pm:149 ugtk2.pm:423 ugtk2.pm:521
+#: ugtk2.pm:814 ugtk2.pm:837
#, c-format
msgid "Ok"
msgstr "確定"
-#: interactive.pm:227 modules/interactive.pm:71 ugtk2.pm:812 wizards.pm:156
+#: interactive.pm:228 modules/interactive.pm:71 ugtk2.pm:813 wizards.pm:156
#, c-format
msgid "Yes"
msgstr "是的"
-#: interactive.pm:227 modules/interactive.pm:71 ugtk2.pm:812 wizards.pm:156
+#: interactive.pm:228 modules/interactive.pm:71 ugtk2.pm:813 wizards.pm:156
#, c-format
msgid "No"
msgstr "否"
-#: interactive.pm:261
+#: interactive.pm:262
#, c-format
msgid "Choose a file"
msgstr "選擇一個檔案"
-#: interactive.pm:386 interactive/gtk.pm:436
+#: interactive.pm:387 interactive/gtk.pm:455
#, c-format
msgid "Add"
msgstr "新增"
-#: interactive.pm:386 interactive/gtk.pm:436
+#: interactive.pm:387 interactive/gtk.pm:455
#, c-format
msgid "Modify"
msgstr "修改"
-#: interactive.pm:386 interactive/gtk.pm:436
+#: interactive.pm:387 interactive/gtk.pm:455
#, c-format
msgid "Remove"
msgstr "移除"
-#: interactive.pm:545 interactive/curses.pm:263 ugtk2.pm:519
+#: interactive.pm:546 interactive/curses.pm:263 ugtk2.pm:521
#, c-format
msgid "Finish"
msgstr "完成"
-#: interactive.pm:546 interactive/curses.pm:260 ugtk2.pm:517
+#: interactive.pm:547 interactive/curses.pm:260 ugtk2.pm:519
#, c-format
msgid "Previous"
msgstr "上一步"
-#: interactive/gtk.pm:564
+#: interactive/gtk.pm:586
#, c-format
msgid "Beware, Caps Lock is enabled"
msgstr "注意，已開啟字母大寫(Caps Lock)"
@@ -4609,7 +4610,7 @@ msgstr "尚比亞"
msgid "Zimbabwe"
msgstr "辛巴威"
-#: lang.pm:1208
+#: lang.pm:1209
#, c-format
msgid "Welcome to %s"
msgstr "歡迎使用 %s"
@@ -4634,8 +4635,7 @@ msgstr "先移除邏輯 volume\n"
msgid "The bootloader can't handle /boot on multiple physical volumes"
msgstr "開機載入器無法處理位於多個實體磁區的 /boot"
-#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: messages.pm:10
+#: messages.pm:11
#, c-format
msgid ""
"Introduction\n"
@@ -4714,10 +4714,8 @@ msgid ""
"or liability for \n"
"consequential or incidental damages, the above limitation may not apply to "
"you. \n"
-"\n"
"%s\n"
"\n"
-"\n"
"3. The GPL License and Related Licenses\n"
"\n"
"The Software Products consist of components created by different persons or "
@@ -4762,11 +4760,11 @@ msgid ""
"court. As a last \n"
"resort, the dispute will be referred to the appropriate Courts of Law of "
"Paris - France.\n"
-"For any question on this document, please contact Mandriva S.A. \n"
+"For any question on this document, please contact Mandriva S.A."
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: messages.pm:93
+#: messages.pm:90
#, c-format
msgid ""
"You agree not to (i) sell, export, re-export, transfer, divert, disclose "
@@ -4795,7 +4793,7 @@ msgid ""
"by the terms of this Agreement."
msgstr ""
-#: messages.pm:107
+#: messages.pm:104
#, c-format
msgid ""
"Most of these components, but excluding the applications and software "
@@ -4805,7 +4803,7 @@ msgid ""
"General Public Licence, hereafter called \"GPL\", or of similar licenses."
msgstr ""
-#: messages.pm:110
+#: messages.pm:107
#, c-format
msgid ""
"Most of these components are governed under the terms and conditions of the "
@@ -4813,7 +4811,7 @@ msgid ""
"General Public Licence, hereafter called \"GPL\", or of similar licenses."
msgstr ""
-#: messages.pm:115
+#: messages.pm:112
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
@@ -4825,7 +4823,7 @@ msgid ""
"may be applicable to you, check your local laws."
msgstr ""
-#: messages.pm:123
+#: messages.pm:120
#, c-format
msgid ""
"6. Additional provisions applicable to those Software Products provided by "
@@ -4876,7 +4874,7 @@ msgid ""
msgstr ""
#. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: messages.pm:131
+#: messages.pm:150
#, c-format
msgid ""
"Congratulations, installation is complete.\n"
@@ -5042,17 +5040,17 @@ msgstr ""
"載入 %s 模組失敗.\n"
"您要用其他參數再試一次嗎?"
-#: partition_table.pm:409
+#: partition_table.pm:410
#, c-format
msgid "mount failed: "
msgstr "掛載失敗："
-#: partition_table.pm:518
+#: partition_table.pm:519
#, c-format
msgid "Extended partition not supported on this platform"
msgstr "這個平台並不支援延伸分割區"
-#: partition_table.pm:536
+#: partition_table.pm:537
#, c-format
msgid ""
"You have a hole in your partition table but I can not use it.\n"
@@ -5074,39 +5072,39 @@ msgstr ""
"資料完整性檢測失敗。\n"
"這表示寫入任何東西到磁碟將會導致錯亂的、損壞的資料。"
-#: pkgs.pm:228 pkgs.pm:231 pkgs.pm:240
+#: pkgs.pm:229 pkgs.pm:232 pkgs.pm:241
#, c-format
msgid "Unused packages removal"
msgstr ""
-#: pkgs.pm:228
+#: pkgs.pm:229
#, c-format
msgid "Finding unused hardware packages..."
msgstr ""
-#: pkgs.pm:231
+#: pkgs.pm:232
#, c-format
msgid "Finding unused localization packages..."
msgstr ""
-#: pkgs.pm:241
+#: pkgs.pm:242
#, c-format
msgid ""
"We have detected that some packages are not needed for your system "
"configuration."
msgstr ""
-#: pkgs.pm:242
+#: pkgs.pm:243
#, c-format
msgid "We will remove the following packages, unless you choose otherwise:"
msgstr ""
-#: pkgs.pm:245 pkgs.pm:246
+#: pkgs.pm:246 pkgs.pm:247
#, fuzzy, c-format
msgid "Unused hardware support"
msgstr "啟用音效支援"
-#: pkgs.pm:249 pkgs.pm:250
+#: pkgs.pm:250 pkgs.pm:251
#, c-format
msgid "Unused localization"
msgstr ""
@@ -5861,7 +5859,7 @@ msgstr ""
msgid "Security Administrator:"
msgstr "安全性管理者："
-#: security/level.pm:69
+#: security/level.pm:66
#, c-format
msgid "Login or email:"
msgstr ""
@@ -6262,7 +6260,7 @@ msgstr "遠端管理"
msgid "Database Server"
msgstr "資料庫軟體"
-#: services.pm:153 services.pm:189
+#: services.pm:153 services.pm:190
#, c-format
msgid "Services"
msgstr "服務"
@@ -6277,22 +6275,22 @@ msgstr "選擇希望在下一次開機時啟動的服務程式項目"
msgid "Services: %d activated for %d registered"
msgstr "服務：%2$d 個註冊的服務中已經啟動了 %1$d 個"
-#: services.pm:205
+#: services.pm:206
#, c-format
msgid "running"
msgstr "執行中"
-#: services.pm:205
+#: services.pm:206
#, c-format
msgid "stopped"
msgstr "未啟動"
-#: services.pm:210
+#: services.pm:211
#, c-format
msgid "Services and daemons"
msgstr "服務程式"
-#: services.pm:216
+#: services.pm:217
#, c-format
msgid ""
"No additional information\n"
@@ -6301,27 +6299,27 @@ msgstr ""
"抱歉 ! 這個服務項目並沒有\n"
"額外的相關資訊。"
-#: services.pm:221 ugtk2.pm:923
+#: services.pm:222 ugtk2.pm:926
#, c-format
msgid "Info"
msgstr "資訊"
-#: services.pm:224
+#: services.pm:225
#, c-format
msgid "Start when requested"
msgstr "要求時啟動"
-#: services.pm:224
+#: services.pm:225
#, c-format
msgid "On boot"
msgstr "開機自動載入"
-#: services.pm:242
+#: services.pm:243
#, c-format
msgid "Start"
msgstr "啟動"
-#: services.pm:242
+#: services.pm:243
#, c-format
msgid "Stop"
msgstr "停止"
@@ -6556,32 +6554,32 @@ msgstr "俄羅斯聯邦"
msgid "Yugoslavia"
msgstr "南斯拉夫"
-#: ugtk2.pm:813
+#: ugtk2.pm:814
#, c-format
msgid "Is this correct?"
msgstr "這樣子正確嗎？"
-#: ugtk2.pm:873
+#: ugtk2.pm:874
#, c-format
msgid "No file chosen"
msgstr "未選擇檔案"
-#: ugtk2.pm:875
+#: ugtk2.pm:876
#, c-format
msgid "You have chosen a file, not a directory"
msgstr "您選擇了檔案而非目錄"
-#: ugtk2.pm:877
+#: ugtk2.pm:878
#, c-format
msgid "You have chosen a directory, not a file"
msgstr "您選擇了目錄而非檔案"
-#: ugtk2.pm:879
+#: ugtk2.pm:880
#, c-format
msgid "No such directory"
msgstr "無此目錄"
-#: ugtk2.pm:879
+#: ugtk2.pm:880
#, c-format
msgid "No such file"
msgstr "無此檔案"
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-05 06:25:28 +0000