diff options
Diffstat (limited to 'perl-install/share/po/zh_CN.po')
| -rw-r--r-- | perl-install/share/po/zh_CN.po | 3662 |
1 files changed, 3662 insertions, 0 deletions
diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po new file mode 100644 index 000000000..8c3f83a2d --- /dev/null +++ b/perl-install/share/po/zh_CN.po @@ -0,0 +1,3662 @@ +# SOME DESCRIPTIVE TITLE. +# Copyright (C) 1999 Free Software Foundation, Inc. +# Copyright (c) 1999 MandrakeSoft +# Cheng Yuan-Chung <platin@ms31.hinet.net>, 1999 +# c17@acer.17.o3.net +# +# NOTE: this file is the result of the conversion of zh_TW.Big5.po trough +# 'b5togb' filter; however, as I've been told that there are idiomatisms +# by doing like that, a real mantainer of the zh_CN.po file is still wanted +# +msgid "" +msgstr "" +"Project-Id-Version: DrakX VERSION\n" +"POT-Creation-Date: 2000-01-09 21:03+0100\n" +"PO-Revision-Date: 1999-12-15 00:33+0100\n" +"Last-Translator: Nobody yet\n" +"Language-Team: Chinese (GB2312)\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=gb2312\n" +"Content-Transfer-Encoding: 8bit\n" + +#: ../Xconfigurator.pm_.c:159 +msgid "Graphic card" +msgstr "显示卡" + +#: ../Xconfigurator.pm_.c:159 +msgid "Select a graphic card" +msgstr "选取您的显示卡" + +#: ../Xconfigurator.pm_.c:160 +msgid "Choose a X server" +msgstr "选取合适的 X 伺服程式" + +#: ../Xconfigurator.pm_.c:160 +#, fuzzy +msgid "X server" +msgstr "伺服器" + +#: ../Xconfigurator.pm_.c:181 +msgid "Select the memory size of your graphic card" +msgstr "设定显示卡上的绘图记忆体大小" + +#: ../Xconfigurator.pm_.c:203 +msgid "Choose options for server" +msgstr "选取 X 伺服程式的参数" + +#: ../Xconfigurator.pm_.c:221 +msgid "Choose a monitor" +msgstr "选取合适的萤幕" + +#: ../Xconfigurator.pm_.c:221 +msgid "Monitor" +msgstr "萤幕" + +#: ../Xconfigurator.pm_.c:224 +msgid "" +"The two critical parameters are the vertical refresh rate, which is the " +"rate\n" +"at which the whole screen is refreshed, and most importantly the horizontal\n" +"sync rate, which is the rate at which scanlines are displayed.\n" +"\n" +"It is VERY IMPORTANT that you do not specify a monitor type with a sync " +"range\n" +"that is beyond the capabilities of your monitor: you may damage your " +"monitor.\n" +" If in doubt, choose a conservative setting." +msgstr "" +"两个重要的参数是垂直更新频率和水平更新频率。\n" +"\n" +"如果你选择了超过您的萤幕所能负荷的设定值，\n" +"可能会伤害到您的萤幕。请小心！" + +#: ../Xconfigurator.pm_.c:231 +msgid "Horizontal refresh rate" +msgstr "水平更新频率" + +#: ../Xconfigurator.pm_.c:231 +msgid "Vertical refresh rate" +msgstr "垂直更新频率" + +#: ../Xconfigurator.pm_.c:272 +msgid "Monitor not configured" +msgstr "没有完成设定萤幕的动作" + +#: ../Xconfigurator.pm_.c:275 +msgid "Graphic card not configured yet" +msgstr "尚未完成显示卡的设定" + +#: ../Xconfigurator.pm_.c:278 +msgid "Resolutions not chosen yet" +msgstr "尚未选取要使用的解析度" + +#: ../Xconfigurator.pm_.c:289 +msgid "Do you want to test the configuration?" +msgstr "您想要测试您的设定值吗 ?" + +#: ../Xconfigurator.pm_.c:293 +msgid "Warning: testing is dangerous on this graphic card" +msgstr "小心! 这项测式在此张显示卡会有危险" + +#: ../Xconfigurator.pm_.c:296 +msgid "Test configuration" +msgstr "测试设定值" + +#: ../Xconfigurator.pm_.c:334 +msgid "An error occurred:" +msgstr "发生错误∶" + +#: ../Xconfigurator.pm_.c:336 +msgid "" +"\n" +"try changing some parameters" +msgstr "" +"\n" +"试着更改一些参数的设定值" + +#: ../Xconfigurator.pm_.c:358 +#, c-format +msgid "(leaving in %d seconds)" +msgstr "(在经过 %d 秒后离开)" + +#: ../Xconfigurator.pm_.c:362 ../my_gtk.pm_.c:425 +msgid "Is this correct?" +msgstr "这个设定正确吗 ?" + +#: ../Xconfigurator.pm_.c:370 +msgid "An error occurred, try changing some parameters" +msgstr "发生错误，请试着更改一些参数的设定值" + +#: ../Xconfigurator.pm_.c:378 ../Xconfigurator.pm_.c:547 +msgid "Automatic resolutions" +msgstr "自动设定解析度" + +#: ../Xconfigurator.pm_.c:379 +msgid "" +"To find the available resolutions I will try different ones.\n" +"Your screen will blink...\n" +"You can switch if off if you want, you'll hear a beep when it's over" +msgstr "" +"程式将会尝试几种不同的解析度以找出可用的设定值，\n" +"您的萤幕将会闪动一阵子... 假如您要保护您的萤幕的话，\n" +"可以将萤幕电源先关掉一下子；程式执行结束后，会有哔一声提醒您" + +#: ../Xconfigurator.pm_.c:434 ../printerdrake.pm_.c:208 +msgid "Resolution" +msgstr "解析度" + +#: ../Xconfigurator.pm_.c:469 +msgid "Choose resolution and color depth" +msgstr "选取解析度以及颜色数" + +#: ../Xconfigurator.pm_.c:477 +msgid "Show all" +msgstr "显示全部" + +#: ../Xconfigurator.pm_.c:501 +#, fuzzy +msgid "Resolutions" +msgstr "解析度" + +#: ../Xconfigurator.pm_.c:548 +msgid "" +"I can try to find the available resolutions (eg: 800x600).\n" +"Sometimes, though, it may hang the machine.\n" +"Do you want to try?" +msgstr "" +"这个程式会自动找出可用的解析度 (如: 800x600)。\n" +"不过，有时候这个动作会让机器当住，\n" +"您要试试看吗 ?" + +#: ../Xconfigurator.pm_.c:553 +msgid "" +"No valid modes found\n" +"Try with another video card or monitor" +msgstr "" +"找不到可用的显示模式，\n" +"请检查您的显示卡或萤幕设定是否正确" + +#: ../Xconfigurator.pm_.c:772 +#, c-format +msgid "Keyboard layout: %s\n" +msgstr "键盘的形式: %s\n" + +#: ../Xconfigurator.pm_.c:773 +#, c-format +msgid "Mouse type: %s\n" +msgstr "滑鼠的种类: %s\n" + +#: ../Xconfigurator.pm_.c:774 +#, c-format +msgid "Mouse device: %s\n" +msgstr "滑鼠连接的位置: %s\n" + +#: ../Xconfigurator.pm_.c:775 +#, c-format +msgid "Monitor: %s\n" +msgstr "萤幕: %s\n" + +#: ../Xconfigurator.pm_.c:776 +#, c-format +msgid "Monitor HorizSync: %s\n" +msgstr "萤幕水平更新频率: %s\n" + +#: ../Xconfigurator.pm_.c:777 +#, c-format +msgid "Monitor VertRefresh: %s\n" +msgstr "萤幕垂直更新频率: %s\n" + +#: ../Xconfigurator.pm_.c:778 +#, c-format +msgid "Graphic card: %s\n" +msgstr "显示卡: %s\n" + +#: ../Xconfigurator.pm_.c:779 +#, c-format +msgid "Graphic memory: %s kB\n" +msgstr "绘图记忆体: %s kB\n" + +#: ../Xconfigurator.pm_.c:780 +#, c-format +msgid "XFree86 server: %s\n" +msgstr "XFree86 伺服程式: %s\n" + +#: ../Xconfigurator.pm_.c:794 +msgid "Preparing X-Window configuration" +msgstr "正在准备 X-Window 的设定" + +#: ../Xconfigurator.pm_.c:808 +msgid "Change Monitor" +msgstr "改变萤幕设定" + +#: ../Xconfigurator.pm_.c:809 +msgid "Change Graphic card" +msgstr "改变显示卡设定" + +#: ../Xconfigurator.pm_.c:810 +msgid "Change Server options" +msgstr "改变伺服程式的参数设定" + +#: ../Xconfigurator.pm_.c:811 +msgid "Change Resolution" +msgstr "改变解析度设定" + +#: ../Xconfigurator.pm_.c:812 +msgid "Automatical resolutions search" +msgstr "自动寻找可用的解析度" + +#: ../Xconfigurator.pm_.c:816 +msgid "Show information" +msgstr "显示所有资讯" + +#: ../Xconfigurator.pm_.c:817 +msgid "Test again" +msgstr "再次测试设定值" + +#: ../Xconfigurator.pm_.c:818 ../standalone/rpmdrake_.c:46 +msgid "Quit" +msgstr "结束" + +#: ../Xconfigurator.pm_.c:822 +msgid "What do you want to do?" +msgstr "您打算怎么作 ?" + +#: ../Xconfigurator.pm_.c:829 +msgid "Forget the changes?" +msgstr "放弃您所做的改变 ?" + +#: ../Xconfigurator.pm_.c:845 +#, c-format +msgid "Please relog into %s to activate the changes" +msgstr "请由 %s 来启动您所做的更改" + +#: ../Xconfigurator.pm_.c:861 +msgid "Please log out and then use Ctrl-Alt-BackSpace" +msgstr "请离开然后同时按 Ctrl-Alt-BackSpace" + +#: ../Xconfigurator.pm_.c:864 +msgid "X at startup" +msgstr "开机时启动 X" + +#: ../Xconfigurator.pm_.c:865 +msgid "" +"I can set up your computer to automatically start X upon booting.\n" +"Would you like X to start when you reboot?" +msgstr "" +"程式可以帮您设定在开机时自动进入绘图模式，\n" +"您希望在重新开机以后就自动进入绘图模式吗 ?" + +#: ../Xconfigurator_consts.pm_.c:4 +msgid "256 colors (8 bits)" +msgstr "256 色 (8 位元)" + +#: ../Xconfigurator_consts.pm_.c:5 +msgid "32 thousand colors (15 bits)" +msgstr "3 万 2 千色 (15 位元)" + +#: ../Xconfigurator_consts.pm_.c:6 +msgid "65 thousand colors (16 bits)" +msgstr "6 万 5 千色 (16 位元)" + +#: ../Xconfigurator_consts.pm_.c:7 +msgid "16 million colors (24 bits)" +msgstr "1 千 6 百万色 (24 位元)" + +#: ../Xconfigurator_consts.pm_.c:8 +msgid "4 billion colors (32 bits)" +msgstr "4 亿色 (32 位元)" + +#: ../Xconfigurator_consts.pm_.c:96 +msgid "256 kB" +msgstr "256 kB" + +#: ../Xconfigurator_consts.pm_.c:97 +msgid "512 kB" +msgstr "512 kB" + +#: ../Xconfigurator_consts.pm_.c:98 +msgid "1 MB" +msgstr "1 MB" + +#: ../Xconfigurator_consts.pm_.c:99 +msgid "2 MB" +msgstr "2 MB" + +#: ../Xconfigurator_consts.pm_.c:100 +msgid "4 MB" +msgstr "4 MB" + +#: ../Xconfigurator_consts.pm_.c:101 +msgid "8 MB" +msgstr "8 MB" + +#: ../Xconfigurator_consts.pm_.c:102 +msgid "16 MB or more" +msgstr "16 MB or more" + +#: ../Xconfigurator_consts.pm_.c:107 ../Xconfigurator_consts.pm_.c:108 +msgid "Standard VGA, 640x480 at 60 Hz" +msgstr "标准 VGA 模式, 640x480 at 60 Hz" + +#: ../Xconfigurator_consts.pm_.c:109 +msgid "Super VGA, 800x600 at 56 Hz" +msgstr "Super VGA, 800x600 at 56 Hz" + +#: ../Xconfigurator_consts.pm_.c:110 +msgid "8514 Compatible, 1024x768 at 87 Hz interlaced (no 800x600)" +msgstr "8514 相容模式, 1024x768 at 87 Hz interlaced (no 800x600)" + +#: ../Xconfigurator_consts.pm_.c:111 +msgid "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" +msgstr "Super VGA, 1024x768 at 87 Hz interlaced, 800x600 at 56 Hz" + +#: ../Xconfigurator_consts.pm_.c:112 +msgid "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" +msgstr "Extended Super VGA, 800x600 at 60 Hz, 640x480 at 72 Hz" + +#: ../Xconfigurator_consts.pm_.c:113 +msgid "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" +msgstr "Non-Interlaced SVGA, 1024x768 at 60 Hz, 800x600 at 72 Hz" + +#: ../Xconfigurator_consts.pm_.c:114 +msgid "High Frequency SVGA, 1024x768 at 70 Hz" +msgstr "High Frequency SVGA, 1024x768 at 70 Hz" + +#: ../Xconfigurator_consts.pm_.c:115 +msgid "Multi-frequency that can do 1280x1024 at 60 Hz" +msgstr "Multi-frequency that can do 1280x1024 at 60 Hz" + +#: ../Xconfigurator_consts.pm_.c:116 +msgid "Multi-frequency that can do 1280x1024 at 74 Hz" +msgstr "Multi-frequency that can do 1280x1024 at 74 Hz" + +#: ../Xconfigurator_consts.pm_.c:117 +msgid "Multi-frequency that can do 1280x1024 at 76 Hz" +msgstr "Multi-frequency that can do 1280x1024 at 76 Hz" + +#: ../Xconfigurator_consts.pm_.c:118 +msgid "Monitor that can do 1600x1200 at 70 Hz" +msgstr "您的萤幕可使用 1600x1200 at 70 Hz" + +#: ../Xconfigurator_consts.pm_.c:119 +msgid "Monitor that can do 1600x1200 at 76 Hz" +msgstr "您的萤幕可使用 1600x1200 at 76 Hz" + +#: ../diskdrake.pm_.c:16 ../diskdrake.pm_.c:370 +msgid "Create" +msgstr "新建" + +#: ../diskdrake.pm_.c:17 +msgid "Unmount" +msgstr "卸载" + +#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:372 +msgid "Delete" +msgstr "删除" + +#: ../diskdrake.pm_.c:18 +msgid "Format" +msgstr "格式化" + +#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:527 +msgid "Resize" +msgstr "改变大小" + +#: ../diskdrake.pm_.c:18 ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:414 +msgid "Type" +msgstr "格式" + +#: ../diskdrake.pm_.c:19 ../diskdrake.pm_.c:430 +msgid "Mount point" +msgstr "挂载点" + +#: ../diskdrake.pm_.c:33 +msgid "Write /etc/fstab" +msgstr "写入 /etc/fstab" + +#: ../diskdrake.pm_.c:34 +msgid "Toggle to expert mode" +msgstr "进入专家模式" + +#: ../diskdrake.pm_.c:35 +msgid "Toggle to normal mode" +msgstr "进入模通模式" + +#: ../diskdrake.pm_.c:36 +msgid "Restore from file" +msgstr "恢复存在档案中的设定值" + +#: ../diskdrake.pm_.c:37 +msgid "Save in file" +msgstr "存入档案" + +#: ../diskdrake.pm_.c:38 +msgid "Restore from floppy" +msgstr "恢复存在软碟中的设定值" + +#: ../diskdrake.pm_.c:39 +msgid "Save on floppy" +msgstr "存入软碟" + +#: ../diskdrake.pm_.c:40 ../install_steps_interactive.pm_.c:618 +#: ../install_steps_interactive.pm_.c:748 ../standalone/adduserdrake_.c:34 +msgid "Done" +msgstr "完成" + +#: ../diskdrake.pm_.c:43 +msgid "Clear all" +msgstr "全部清除" + +#: ../diskdrake.pm_.c:44 +msgid "Format all" +msgstr "全部格式化" + +#: ../diskdrake.pm_.c:45 +msgid "Auto allocate" +msgstr "自动分配" + +#: ../diskdrake.pm_.c:48 +msgid "All primary partitions are used" +msgstr "主分割区数目已经满了" + +#: ../diskdrake.pm_.c:48 +msgid "I can't add any more partition" +msgstr "程式无法再新增任何分割区了" + +#: ../diskdrake.pm_.c:48 +msgid "" +"To have more partitions, please delete one to be able to create an extended " +"partition" +msgstr "需要有更多的分割区的话，请删除一个主分割区以建立延伸分割区" + +#: ../diskdrake.pm_.c:51 +#, fuzzy +msgid "Rescue partition table" +msgstr "写入硬碟分割表" + +#: ../diskdrake.pm_.c:52 +msgid "Undo" +msgstr "取消" + +#: ../diskdrake.pm_.c:53 +msgid "Write partition table" +msgstr "写入硬碟分割表" + +#: ../diskdrake.pm_.c:54 +msgid "Reload" +msgstr "重读" + +#: ../diskdrake.pm_.c:98 +msgid "Empty" +msgstr "清空" + +#: ../diskdrake.pm_.c:98 +msgid "Ext2" +msgstr "Ext2" + +#: ../diskdrake.pm_.c:98 +msgid "FAT" +msgstr "FAT" + +#: ../diskdrake.pm_.c:98 +msgid "Other" +msgstr "其他" + +#: ../diskdrake.pm_.c:98 +msgid "Swap" +msgstr "Swap" + +#: ../diskdrake.pm_.c:104 +msgid "Filesystem types:" +msgstr "档案系统格式∶" + +#: ../diskdrake.pm_.c:113 +msgid "Details" +msgstr "详细资讯" + +#: ../diskdrake.pm_.c:127 +#, fuzzy +msgid "" +"You have one big fat partition\n" +"(generally use by MicroSoft Dos/Windows).\n" +"I suggest you first resize that partition\n" +"(click on it, then click on \"Resize\")" +msgstr "" +"您有一个很大的 fat 分割区，\n" +"建议您重设这个分割区的大小\n" +"(点选这个分割区，然后按 \"改变大小\" )" + +#: ../diskdrake.pm_.c:132 +msgid "Please make a backup of your data first" +msgstr "请先备份您的资料" + +#: ../diskdrake.pm_.c:132 ../diskdrake.pm_.c:146 ../diskdrake.pm_.c:458 +#: ../diskdrake.pm_.c:487 +msgid "Read carefully!" +msgstr "看仔细!!" + +#: ../diskdrake.pm_.c:146 +#, c-format +msgid "After %s partition %s," +msgstr "在 %s 分割区 %s 之后，" + +#: ../diskdrake.pm_.c:146 +msgid "all data on this partition will be lost" +msgstr "所有在这个分割区上的资料都会被清除" + +#: ../diskdrake.pm_.c:165 ../install_any.pm_.c:193 ../install_steps.pm_.c:71 +#: ../install_steps_interactive.pm_.c:37 ../standalone/diskdrake_.c:60 +#: ../standalone/rpmdrake_.c:294 ../standalone/rpmdrake_.c:304 +msgid "Error" +msgstr "错误" + +#: ../diskdrake.pm_.c:189 ../diskdrake.pm_.c:610 +msgid "Mount point: " +msgstr "挂载点:" + +#: ../diskdrake.pm_.c:190 ../diskdrake.pm_.c:228 +msgid "Device: " +msgstr "装置: " + +#: ../diskdrake.pm_.c:191 +#, c-format +msgid "DOS drive letter: %s (just a guess)\n" +msgstr "DOS 底下的磁碟代号: %s (猜测值，仅供参考)\n" + +#: ../diskdrake.pm_.c:192 ../diskdrake.pm_.c:231 +msgid "Type: " +msgstr "格式: " + +#: ../diskdrake.pm_.c:193 +#, c-format +msgid "Start: sector %s\n" +msgstr "开始: 第 %s 磁轨\n" + +#: ../diskdrake.pm_.c:194 +#, c-format +msgid "Size: %s MB" +msgstr "大小: %s MB" + +#: ../diskdrake.pm_.c:196 +#, c-format +msgid ", %s sectors" +msgstr ", 第 %s 磁轨" + +#: ../diskdrake.pm_.c:198 +#, c-format +msgid "Cylinder %d to cylinder %d\n" +msgstr "第 %d 磁柱到第 %d 磁柱\n" + +#: ../diskdrake.pm_.c:199 +msgid "Formatted\n" +msgstr "已格式化\n" + +#: ../diskdrake.pm_.c:200 +msgid "Not formatted\n" +msgstr "未格式化\n" + +#: ../diskdrake.pm_.c:201 +msgid "Mounted\n" +msgstr "已挂载\n" + +#: ../diskdrake.pm_.c:202 +#, c-format +msgid "RAID md%s\n" +msgstr "磁碟阵列 (RAID) md%s\n" + +#: ../diskdrake.pm_.c:203 +msgid "" +"Partition booted by default\n" +" (for MS-DOS boot, not for lilo)\n" +msgstr "" +"预设开机的分割区\n" +" (给 MS-DOS 开机程式用的, 跟 lilo 无关)\n" + +#: ../diskdrake.pm_.c:205 +#, c-format +msgid "Level %s\n" +msgstr "RAID 阶层 %s\n" + +#: ../diskdrake.pm_.c:206 +#, c-format +msgid "Chunk size %s\n" +msgstr "组块大小 %s\n" + +#: ../diskdrake.pm_.c:207 +#, c-format +msgid "RAID-disks %s\n" +msgstr "RAID 磁碟 %s\n" + +#: ../diskdrake.pm_.c:224 +msgid "Please click on a partition" +msgstr "请选取一个分割区" + +#: ../diskdrake.pm_.c:229 +#, c-format +msgid "Size: %d MB\n" +msgstr "大小: %d MB\n" + +#: ../diskdrake.pm_.c:230 +#, c-format +msgid "Geometry: %s cylinders, %s heads, %s sectors\n" +msgstr "硬碟资讯: %s 磁柱, %s 读写头, %s 磁区\n" + +#: ../diskdrake.pm_.c:232 +#, c-format +msgid "on bus %d id %d\n" +msgstr "位在 bus %d id %d\n" + +#: ../diskdrake.pm_.c:245 +msgid "Mount" +msgstr "挂载" + +#: ../diskdrake.pm_.c:246 +msgid "Active" +msgstr "启动" + +#: ../diskdrake.pm_.c:247 +msgid "Add to RAID" +msgstr "加入磁碟阵列" + +#: ../diskdrake.pm_.c:248 +msgid "Remove from RAID" +msgstr "由磁碟阵列中移除" + +#: ../diskdrake.pm_.c:249 +msgid "Modify RAID" +msgstr "变更磁碟阵列设定" + +#: ../diskdrake.pm_.c:256 +msgid "Choose action" +msgstr "选择动作" + +#: ../diskdrake.pm_.c:349 +msgid "" +"Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " +"1024).\n" +"Either you use LILO and it won't work, or you don't use LILO and you don't " +"need /boot" +msgstr "" + +#: ../diskdrake.pm_.c:353 +msgid "" +"The partition you've selected to add as root (/) is physically located " +"beyond\n" +"the 1024th cylinder of the hard drive, and you have no /boot partition.\n" +"If you plan to use the LILO boot manager, be careful to add a /boot partition" +msgstr "" + +#: ../diskdrake.pm_.c:370 ../diskdrake.pm_.c:372 +#, c-format +msgid "Use ``%s'' instead" +msgstr "用 ``%s 取代''" + +#: ../diskdrake.pm_.c:375 +msgid "Use ``Unmount'' first" +msgstr "请先 Unmount" + +#: ../diskdrake.pm_.c:376 ../diskdrake.pm_.c:409 +msgid "changing type of" +msgstr "改变分割区型态" + +#: ../diskdrake.pm_.c:388 +msgid "Continue anyway?" +msgstr "仍然继续执行" + +#: ../diskdrake.pm_.c:393 +msgid "Quit without saving" +msgstr "不储存改变就离开" + +#: ../diskdrake.pm_.c:393 +#, fuzzy +msgid "Quit without writing the partition table?" +msgstr "写入硬碟分割表" + +#: ../diskdrake.pm_.c:412 +#, fuzzy +msgid "Change partition type" +msgstr "写入硬碟分割表" + +#: ../diskdrake.pm_.c:413 +#, fuzzy +msgid "Which partition type do you want?" +msgstr "您打算怎么作 ?" + +#: ../diskdrake.pm_.c:429 +#, fuzzy, c-format +msgid "Where do you want to mount device %s?" +msgstr "您打算怎么作 ?" + +#: ../diskdrake.pm_.c:451 +#, fuzzy +msgid "formatting" +msgstr "格式化" + +#: ../diskdrake.pm_.c:453 +#, fuzzy +msgid "Formatting" +msgstr "格式化" + +#: ../diskdrake.pm_.c:453 ../install_steps_interactive.pm_.c:221 +#, fuzzy, c-format +msgid "Formatting partition %s" +msgstr "格式化硬碟分割区" + +#: ../diskdrake.pm_.c:458 +#, fuzzy +msgid "After formatting all partitions," +msgstr "在 %s 分割区 %s 之后，" + +#: ../diskdrake.pm_.c:458 +#, fuzzy +msgid "all data on these partitions will be lost" +msgstr "所有在这个分割区上的资料都会被清除" + +#: ../diskdrake.pm_.c:468 +msgid "Move" +msgstr "移动" + +#: ../diskdrake.pm_.c:469 +#, fuzzy +msgid "Which disk do you want to move to?" +msgstr "您打算怎么作 ?" + +#: ../diskdrake.pm_.c:473 +msgid "Sector" +msgstr "" + +#: ../diskdrake.pm_.c:474 +#, fuzzy +msgid "Which sector do you want to move to?" +msgstr "您打算怎么作 ?" + +#: ../diskdrake.pm_.c:477 +msgid "Moving" +msgstr "移动" + +#: ../diskdrake.pm_.c:477 +#, fuzzy +msgid "Moving partition..." +msgstr "格式化硬碟分割区" + +#: ../diskdrake.pm_.c:487 +#, c-format +msgid "Partition table of drive %s is going to be written to disk!" +msgstr "%s 磁碟的分割区表格将会写入磁碟中 !" + +#: ../diskdrake.pm_.c:489 +msgid "You'll need to reboot before the modification can take place" +msgstr "您必需重新开机使您做的更动生效" + +#: ../diskdrake.pm_.c:510 ../install_steps_gtk.pm_.c:255 +msgid "Computing fat filesystem bounds" +msgstr "计算档案系统的范围" + +#: ../diskdrake.pm_.c:510 ../diskdrake.pm_.c:555 +#: ../install_steps_gtk.pm_.c:255 +#, fuzzy +msgid "Resizing" +msgstr "改变大小" + +#: ../diskdrake.pm_.c:524 +msgid "resizing" +msgstr "改变中" + +#: ../diskdrake.pm_.c:534 +#, fuzzy +msgid "Choose the new size" +msgstr "选取合适的 X 伺服程式" + +#: ../diskdrake.pm_.c:534 ../install_steps_graphical.pm_.c:287 +#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:317 +#: ../install_steps_gtk.pm_.c:361 +msgid "MB" +msgstr "MB" + +#: ../diskdrake.pm_.c:587 +#, fuzzy +msgid "Create a new partition" +msgstr "格式化硬碟分割区" + +#: ../diskdrake.pm_.c:603 +#, fuzzy +msgid "Start sector: " +msgstr "开始: 第 %s 磁轨\n" + +#: ../diskdrake.pm_.c:606 +#, fuzzy +msgid "Size in MB: " +msgstr "大小: %s MB" + +#: ../diskdrake.pm_.c:609 +#, fuzzy +msgid "Filesystem type: " +msgstr "档案系统格式∶" + +#: ../diskdrake.pm_.c:611 +msgid "Preference: " +msgstr "偏好设定" + +#: ../diskdrake.pm_.c:655 ../diskdrake.pm_.c:671 +#, fuzzy +msgid "Select file" +msgstr "存入档案" + +#: ../diskdrake.pm_.c:664 +msgid "" +"The backup partition table has not the same size\n" +"Still continue?" +msgstr "" +"备份分割区的大小和原来的不同\n" +"仍然继续 ?" + +#: ../diskdrake.pm_.c:672 +msgid "Warning" +msgstr "警告" + +#: ../diskdrake.pm_.c:673 +#, fuzzy +msgid "" +"Insert a floppy in drive\n" +"All data on this floppy will be lost" +msgstr "" +"请插入一张磁片\n" +"所有在这个分割区上的资料都会被清除" + +#: ../diskdrake.pm_.c:687 +#, fuzzy +msgid "Trying to rescue partition table" +msgstr "抢救硬碟分割表" + +#: ../diskdrake.pm_.c:698 +msgid "device" +msgstr "装置" + +#: ../diskdrake.pm_.c:699 +msgid "level" +msgstr "层次" + +#: ../diskdrake.pm_.c:700 +#, fuzzy +msgid "chunk size" +msgstr "组块大小 %s\n" + +#: ../diskdrake.pm_.c:712 +msgid "Choose an existing RAID to add to" +msgstr "选择加入一个已存在的 RAID" + +#: ../diskdrake.pm_.c:713 +msgid "new" +msgstr "新增加" + +#: ../fs.pm_.c:67 ../fs.pm_.c:73 +#, c-format +msgid "%s formatting of %s failed" +msgstr "%s 格式化 在 %s 失败" + +#: ../fs.pm_.c:93 +#, c-format +msgid "don't know how to format %s in type %s" +msgstr "不知道用 %s 格式将 %s 格式化" + +#: ../fs.pm_.c:106 +msgid "nfs mount failed" +msgstr "nfs 载入失败" + +#: ../fs.pm_.c:123 +msgid "mount failed: " +msgstr "载入失败" + +#: ../fs.pm_.c:134 +#, c-format +msgid "error unmounting %s: %s" +msgstr "卸载失败 %s: %s" + +#: ../fsedit.pm_.c:219 +msgid "Mount points must begin with a leading /" +msgstr "载入点必需要以 / 为开头" + +#: ../fsedit.pm_.c:222 +#, c-format +msgid "There is already a partition with mount point %s" +msgstr "载入点 %s 已经存在有分割区" + +#: ../fsedit.pm_.c:306 +#, c-format +msgid "Error opening %s for writing: %s" +msgstr "在打开 %s 写入时发生错误: %s" + +#: ../fsedit.pm_.c:388 +msgid "" +"An error has occurred - no valid devices were found on which to create new " +"filesystems. Please check your hardware for the cause of this problem" +msgstr "发生错误 ! 没有可用的装置可以建立新的档案系统。请检查您的碟体 !" + +#: ../fsedit.pm_.c:403 +#, fuzzy +msgid "You don't have any partitions!" +msgstr "程式无法再新增任何分割区了" + +#: ../help.pm_.c:7 +msgid "Choose preferred language for install and system usage." +msgstr "请选择安装及系统使用的语言" + +#: ../help.pm_.c:10 +msgid "Choose the layout corresponding to your keyboard from the list above" +msgstr "请从上列表单中选出符合您使用的键盘" + +#: ../help.pm_.c:13 +msgid "" +"Choose \"Install\" if there are no previous versions of Linux\n" +"installed, or if you wish to use multiple distributions or versions.\n" +"\n" +"\n" +"Choose \"Upgrade\" if you wish to update a previous version of Mandrake\n" +"Linux: 5.1 (Venice), 5.2 (Leloo), 5.3 (Festen), 6.0 (Venus), 6.1\n" +"(Helios) or Gold 2000." +msgstr "" +"如果没有旧版本的 Linux ，或您想安装多种套件或是不同版本\n" +"请选择 \"安装\"\n" +"\n" +"\n" +"如果您想从旧版本的 Mandrake Linux 升级 5.1 (Venice), 5.2 (Leloo),\n" +"5.3 (Festen), 6.0 (Venus), 6.1 (Helios) or Gold 2000 \n" +"请选择 \"升级\"." + +#: ../help.pm_.c:22 +msgid "" +"Select:\n" +"\n" +" - Recommended: If you have never installed Linux before.\n" +"\n" +"\n" +" - Customized: If you are familiar with Linux, you will be able to \n" +"select the usage for the installed system between normal, development or\n" +"server. Choose \"Normal\" for a general purpose installation of your\n" +"computer. You may choose \"Development\" if you will be using the computer\n" +"primarily for software development, or choose \"Server\" if you wish to\n" +"install a general purpose server (for mail, printing...).\n" +"\n" +"\n" +" - Expert: If you are fluent with GNU/Linux and want to perform\n" +"a highly customized installation, this Install Class is for you. You will\n" +"be able to select the usage of your installed system as for \"Customized\"." +msgstr "" + +#: ../help.pm_.c:40 +msgid "" +"DrakX will attempt at first to look for one or more PCI\n" +"SCSI adapter(s). If it finds it (or them) and knows which driver(s)\n" +"to use, it will insert it (them) automatically.\n" +"\n" +"\n" +"If your SCSI adapter is an ISA board, or is a PCI board but DrakX\n" +"doesn't know which driver to use for this card, or if you have no\n" +"SCSI adapters at all, you will then be prompted on whether you have\n" +"one or not. If you have none, answer \"No\". If you have one or more,\n" +"answer \"Yes\". A list of drivers will then pop up, from which you\n" +"will have to select one.\n" +"\n" +"\n" +"After you have selected the driver, DrakX will ask if you\n" +"want to specify options for it. First, try and let the driver\n" +"probe for the hardware: it usually works fine.\n" +"\n" +"\n" +"If not, do not forget the information on your hardware that you\n" +"could get from your documentation or from Windows (if you have it\n" +"on your system), as suggested by the installation guide. These\n" +"are the options you will need to provide to the driver." +msgstr "" + +#: ../help.pm_.c:64 +msgid "" +"At this point, you may choose what partition(s) to use to install\n" +"your Linux-Mandrake system if they have been already defined (from a\n" +"previous install of Linux or from another partitionning tool). In other\n" +"cases, hard drive partitions must be defined. This operation consists of\n" +"logically dividing the computer's hard drive capacity into separate\n" +"areas for use.\n" +"\n" +"\n" +"If you have to create new partitions, use \"Auto allocate\" to " +"automatically\n" +"create partitions for Linux. You can select the disk for partitionning by\n" +"clicking on \"hda\" for the first IDE drive,\n" +"\"hdb\" for the second or \"sda\" for the first SCSI drive and so on.\n" +"\n" +"\n" +"Two common partition are: the root partition (/), which is the starting\n" +"point of the filesystem's directory hierarchy, and /boot, which contains\n" +"all files necessary to start the operating system when the\n" +"computer is first turned on.\n" +"\n" +"\n" +"Because the effects of this process are usually irreversible, partitioning\n" +"can be intimidating and stressful to the unexperienced user. DiskDrake\n" +"simplifies the process so that it need not be. Consult the documentation\n" +"and take your time before proceeding." +msgstr "" + +#: ../help.pm_.c:90 +msgid "" +"Any partitions that have been newly defined must be formatted for\n" +"use (formatting meaning creating a filesystem). At this time, you may\n" +"wish to re-format some already existing partitions to erase the data\n" +"they contain. Note: it is not necessary to re-format pre-existing\n" +"partitions, particularly if they contain files or data you wish to keep.\n" +"Typically retained are /home and /usr/local." +msgstr "" + +#: ../help.pm_.c:98 +msgid "" +"You may now select the packages you wish to install.\n" +"\n" +"\n" +"First you can select group of package to install or upgrade. After that\n" +"you can select more packages according to the total size you wish to\n" +"select.\n" +"\n" +"\n" +"If you are in expert mode, you can select packages individually.\n" +"Please note that some packages require the installation of others.\n" +"These are referred to as package dependencies. The packages you select,\n" +"and the packages they require will be automatically selected for\n" +"install. It is impossible to install a package without installing all\n" +"of its dependencies." +msgstr "" + +#: ../help.pm_.c:114 +msgid "" +"The packages selected are now being installed. This operation\n" +"should take a few minutes unless you have chosen to upgrade an\n" +"existing system, in that case it can take more time even before\n" +"upgrade starts." +msgstr "" + +#: ../help.pm_.c:120 +msgid "" +"If DrakX failed to find your mouse, or if you want to\n" +"check what it has done, you will be presented the list of mice\n" +"above.\n" +"\n" +"\n" +"If you agree with DrakX' settings, just jump to the section\n" +"you want by clicking on it in the menu on the left. Otherwise,\n" +"choose a mouse type in the menu which you think is the closest\n" +"match for your mouse.\n" +"\n" +"\n" +"In case of a serial mouse, you will also have to tell DrakX\n" +"which serial port it is connected to." +msgstr "" + +#: ../help.pm_.c:135 +msgid "" +"Please select the correct port. For example, the COM1 port in MS Windows\n" +"is named ttyS0 in Linux." +msgstr "" + +#: ../help.pm_.c:139 +msgid "" +"This section is dedicated to configuring a local area\n" +"network (LAN) or a modem.\n" +"\n" +"Choose \"Local LAN\" and DrakX will\n" +"try to find an Ethernet adapter on your machine. PCI adapters\n" +"should be found and initialized automatically.\n" +"However, if your peripheral is ISA, autodetection will not work,\n" +"and you will have to choose a driver from the list that will appear then.\n" +"\n" +"\n" +"As for SCSI adapters, you can let the driver probe for the adapter\n" +"in the first time, otherwise you will have to specify the options\n" +"to the driver that you will have fetched from documentation of your\n" +"hardware.\n" +"\n" +"\n" +"If you install a Linux-Mandrake system on a machine which is part\n" +"of an already existing network, the network administrator will\n" +"have given you all necessary information (IP address, network\n" +"submask or netmask for short, and hostname). If you're setting\n" +"up a private network at home for example, you should choose\n" +"addresses.\n" +"\n" +"\n" +"Choose \"Dialup with modem\" and the Internet connection with\n" +"a modem will be configured. DrakX will try to find your modem,\n" +"if it fails you will have to select the right serial port where\n" +"your modem is connected to." +msgstr "" + +#: ../help.pm_.c:169 +msgid "" +"Enter:\n" +"\n" +" - IP address: if you don't know it, ask your network administrator or " +"ISP.\n" +"\n" +"\n" +" - Netmask: \"255.255.255.0\" is generally a good choice. If you are not\n" +"sure, ask your network administrator or ISP.\n" +"\n" +"\n" +" - Automatic IP: If your network uses bootp or dhcp protocol, select \n" +"this option. If selected, no value is needed in \"IP address\". If you are\n" +"not sure, ask your network administrator or ISP.\n" +msgstr "" + +#: ../help.pm_.c:184 +msgid "" +"You may now enter dialup options. If you're not sure what to enter, the\n" +"correct information can be obtained from your ISP." +msgstr "" + +#: ../help.pm_.c:188 +msgid "" +"If you will use proxies, please configure them now. If you don't know if\n" +"you will use proxies, ask your network administrator or your ISP." +msgstr "" + +#: ../help.pm_.c:192 +msgid "" +"You can install cryptographic package if your internet connection has been\n" +"set up correctly. First choose a mirror where you wish to download packages " +"and\n" +"after that select the packages to install.\n" +"\n" +"Note you have to select mirror and cryptographic packages according\n" +"to your legislation." +msgstr "" + +#: ../help.pm_.c:200 +msgid "" +"You can now select your timezone according to where you live.\n" +"\n" +"\n" +"Linux manages time in GMT or \"Greenwich Meridian Time\" and translates it\n" +"in local time according to the time zone you have selected." +msgstr "" + +#: ../help.pm_.c:207 +msgid "Help" +msgstr "求助" + +#: ../help.pm_.c:210 +msgid "" +"Linux can deal with many types of printer. Each of these\n" +"types require a different setup.\n" +"\n" +"\n" +"If your printer is directly connected to your computer, select\n" +"\"Local printer\". You will then have to tell which port your\n" +"printer is connected to, and select the appropriate filter.\n" +"\n" +"\n" +"If you want to access a printer located on a remote Unix machine,\n" +"you will have to select \"Remote lpd\". In order to make\n" +"it work, no username or password is required, but you will need\n" +"to know the name of the printing queue on this server.\n" +"\n" +"\n" +"If you want to access a SMB printer (which means, a printer located\n" +"on a remote Windows 9x/NT machine), you will have to specify its\n" +"SMB name (which is not its TCP/IP name), and possibly its IP address,\n" +"plus the username, workgroup and password required in order to\n" +"access the printer, and of course the name of the printer. The same goes\n" +"for a NetWare printer, except that you need no workgroup information." +msgstr "" + +#: ../help.pm_.c:233 +msgid "" +"You can now enter the root password for your Linux-Mandrake\n" +"system. The password must be entered twice to verify that both\n" +"password entries are identical.\n" +"\n" +"\n" +"Root is the administrator of the system, and is the only user\n" +"allowed to modify the system configuration. Therefore, choose\n" +"this password carefully! Unauthorized use of the root account can\n" +"be extremely dangerous to the integrity of the system and its data,\n" +"and other systems connected to it. The password should be a\n" +"mixture of alphanumeric characters and a least 8 characters long. It\n" +"should *never* be written down. Do not make the password too long or\n" +"complicated, though: you must be able to remember without too much\n" +"effort." +msgstr "" + +#: ../help.pm_.c:249 +msgid "" +"To enable a more secure system, you should select \"Use shadow file\" and\n" +"\"Use MD5 passwords\"." +msgstr "" + +#: ../help.pm_.c:253 +msgid "" +"If your network uses NIS, select \"Use NIS\". If you don't know, ask your\n" +"network administrator." +msgstr "" + +#: ../help.pm_.c:257 +msgid "" +"You may now create one or more \"regular\" user account(s), as\n" +"opposed to the \"privileged\" user account, root. You can create\n" +"one or more account(s) for each person you want to allow to use\n" +"the computer. Note that each user account will have its own\n" +"preferences (graphical environment, program settings, etc.)\n" +"and its own \"home directory\", in which these preferences are\n" +"stored.\n" +"\n" +"\n" +"First of all, create an account for yourself! Even if you will be the only " +"user\n" +"of the machine, you may NOT connect as root for daily use of the system: " +"it's a\n" +"very high security risk. Making the system unusable is very often a typo " +"away.\n" +"\n" +"\n" +"Therefore, you should connect to the system using the user account\n" +"you will have created here, and login as root only for administration\n" +"and maintenance purposes." +msgstr "" + +#: ../help.pm_.c:276 +msgid "" +"It is strongly recommended that you answer \"Yes\" here. If you install\n" +"Microsoft Windows at a later date it will overwrite the boot sector.\n" +"Unless you have made a bootdisk as suggested, you will not be able to\n" +"boot into Linux any more." +msgstr "" + +#: ../help.pm_.c:282 +msgid "" +"You need to indicate where you wish\n" +"to place the information required to boot to Linux.\n" +"\n" +"\n" +"Unless you know exactly what you are doing, choose \"First sector of\n" +"drive (MBR)\"." +msgstr "" + +#: ../help.pm_.c:290 +msgid "" +"Unless you know specifically otherwise, the usual choice is \"/dev/hda\"\n" +"(the master drive on the primary channel)." +msgstr "" + +#: ../help.pm_.c:294 +msgid "" +"LILO (the LInux LOader) can boot Linux and other operating systems.\n" +"Normally they are correctly detected during installation. If you don't\n" +"see yours detected, you can add one or more now.\n" +"\n" +"\n" +"If you don't want that everybody could access at one of them, you can " +"remove\n" +"it now (a boot disk will be needed to boot it)." +msgstr "" + +#: ../help.pm_.c:303 +msgid "" +"LILO main options are:\n" +" - Boot device: Sets the name of the device (e.g. a hard disk\n" +"partition) that contains the boot sector. Unless you know specifically\n" +"otherwise, choose \"/dev/hda\".\n" +"\n" +"\n" +" - Linear: Generate linear sector addresses instead of\n" +"sector/head/cylinder addresses. Linear addresses are translated at run\n" +"time and do not depend on disk geometry. Note that boot disks may not be\n" +"portable if \"linear\" is used, because the BIOS service to determine the\n" +"disk geometry does not work reliably for floppy disks. When using\n" +"\"linear\" with large disks, /sbin/lilo may generate references to\n" +"inaccessible disk areas, because 3D sector addresses are not known\n" +"before boot time.\n" +"\n" +"\n" +" - Compact: Tries to merge read requests for adjacent sectors into a\n" +"single read request. This drastically reduces load time and keeps the\n" +"map smaller. Using \"compact\" is especially recommended when booting from\n" +"a floppy disk.\n" +"\n" +"\n" +" - Delay before booting default image: Specifies the number in tenths\n" +"of a second the boot loader should wait before booting the first image.\n" +"This is useful on systems that immediately boot from the hard disk after\n" +"enabling the keyboard. The boot loader doesn't wait if \"delay\" is\n" +"omitted or is set to zero.\n" +"\n" +"\n" +" - Video mode: This specifies the VGA text mode that should be selected\n" +"when booting. The following values are available: \n" +" * normal: select normal 80x25 text mode.\n" +" * <number>: use the corresponding text mode." +msgstr "" + +#: ../help.pm_.c:338 +msgid "" +"Now it's time to configure the X Window System, which is the\n" +"core of the Linux GUI (Graphical User Interface). For this purpose,\n" +"you must configure your video card and monitor. Most of these\n" +"steps are automated, though, therefore your work may only consist\n" +"of verifying what has been done and accept the settings :)\n" +"\n" +"\n" +"When the configuration is over, X will be started (unless you\n" +"ask DrakX not to) so that you can check and see if the\n" +"settings suit you. If they don't, you can come back and\n" +"change them, as many times as necessary." +msgstr "" + +#: ../help.pm_.c:351 +msgid "" +"If something is wrong in X configuration, use these options to correctly\n" +"configure the X Window System." +msgstr "" + +#: ../help.pm_.c:355 +msgid "" +"If you prefer to use a graphical login, select \"Yes\". Otherwise, select\n" +"\"No\"." +msgstr "" + +#: ../help.pm_.c:359 +msgid "" +"You can now select some miscellaneous options for you system.\n" +"\n" +" - Use hard drive optimizations: This option can improve hard disk\n" +"accesses but is only for advanced users, it can ruin your hard drive if\n" +"used incorrectly. Use it only if you know how.\n" +"\n" +"\n" +" - Choose security level: You can choose a security level for your\n" +"system.\n" +" Please refer to the manual for more information.\n" +"\n" +"\n" +" - Precise RAM size if needed: In some cases, Linux is unable to\n" +"correctly detect all the installed RAM on some systems. If this is the\n" +"case, specify the correct quantity. Note: a difference of 2 or 4 Mb is\n" +"normal.\n" +"\n" +"\n" +" - Removable media automounting: If you would prefer not to manually\n" +"mount removable drives (CD-ROM, Floppy, Zip) by typing \"mount\" and\n" +"\"umount\", select this option. \n" +"\n" +"\n" +" - Enable Num Lock at startup: If you want Number Lock enabled after\n" +"booting, select this option (Note: Num Lock will still not work under\n" +"X)." +msgstr "" + +#: ../help.pm_.c:387 +msgid "" +"Your system is going to reboot.\n" +"\n" +"After rebooting, your new Linux Mandrake system will load automatically.\n" +"If you want to boot into another existing operating system, please read\n" +"the additional instructions." +msgstr "" +"在重新开机之后，您新的 Mandrake Linux 系统将会自动载入。\n" +"如果您想要开机至其他作业系统，请参考更多的指示。" + +#: ../install2.pm_.c:43 +msgid "Choose your language" +msgstr "请选择您使用的语系" + +#: ../install2.pm_.c:44 +msgid "Select installation class" +msgstr "请选择想要安装的类别" + +#: ../install2.pm_.c:45 +msgid "Setup SCSI" +msgstr "设定 SCSI" + +#: ../install2.pm_.c:46 +msgid "Choose install or upgrade" +msgstr "选择安装新系统或升级原有系统" + +#: ../install2.pm_.c:47 +msgid "Configure mouse" +msgstr "设定滑鼠" + +#: ../install2.pm_.c:48 +msgid "Choose your keyboard" +msgstr "选取您使用的键盘形式" + +#: ../install2.pm_.c:49 +msgid "Miscellaneous" +msgstr "杂项" + +#: ../install2.pm_.c:50 +msgid "Setup filesystems" +msgstr "设定档案系统" + +#: ../install2.pm_.c:51 +msgid "Format partitions" +msgstr "格式化硬碟分割区" + +#: ../install2.pm_.c:52 +msgid "Choose packages to install" +msgstr "选取要安装的程式套件" + +#: ../install2.pm_.c:53 +msgid "Install system" +msgstr "安装系统" + +#: ../install2.pm_.c:54 +msgid "Configure networking" +msgstr "设定网路连线" + +#: ../install2.pm_.c:55 +msgid "Cryptographic" +msgstr "密码编码" + +#: ../install2.pm_.c:56 +msgid "Configure timezone" +msgstr "设定时区" + +#: ../install2.pm_.c:58 +msgid "Configure printer" +msgstr "设定印表机" + +#: ../install2.pm_.c:59 ../install_steps_interactive.pm_.c:576 +#: ../install_steps_interactive.pm_.c:577 +msgid "Set root password" +msgstr "设定 root 密码" + +#: ../install2.pm_.c:60 +msgid "Add a user" +msgstr "增加一个一般使用者" + +#: ../install2.pm_.c:61 +msgid "Create a bootdisk" +msgstr "制作一张开机磁片" + +#: ../install2.pm_.c:62 +msgid "Install bootloader" +msgstr "安装开机启动程式" + +#: ../install2.pm_.c:63 +msgid "Configure X" +msgstr "设定 X" + +#: ../install2.pm_.c:64 +msgid "Exit install" +msgstr "离开安装程式" + +#: ../install2.pm_.c:83 +msgid "beginner" +msgstr "一般初学者" + +#: ../install2.pm_.c:83 +msgid "developer" +msgstr "程式开发者" + +#: ../install2.pm_.c:83 +msgid "expert" +msgstr "系统专家" + +#: ../install2.pm_.c:83 +msgid "server" +msgstr "伺服器" + +#: ../install2.pm_.c:311 +msgid "" +"You must have a root partition.\n" +"For this, create a partition (or click on an existing one).\n" +"Then choose action ``Mount point'' and set it to `/'" +msgstr "" + +#: ../install2.pm_.c:327 +msgid "Not enough swap to fulfill installation, please add some" +msgstr "" + +#: ../install_any.pm_.c:194 ../standalone/diskdrake_.c:61 +msgid "" +"I can't read your partition table, it's too corrupted for me :(\n" +"I'll try to go on blanking bad partitions" +msgstr "" + +#: ../install_any.pm_.c:210 +msgid "" +"DiskDrake failed to read correctly the partition table.\n" +"Continue at your own risk!" +msgstr "" + +#: ../install_any.pm_.c:220 +msgid "Searching root partition." +msgstr "" + +#: ../install_any.pm_.c:249 +#, fuzzy +msgid "Information" +msgstr "显示所有资讯" + +#: ../install_any.pm_.c:250 +#, c-format +msgid "%s: This is not a root partition, please select another one." +msgstr "" + +#: ../install_any.pm_.c:252 +#, fuzzy +msgid "No root partition found" +msgstr "格式化硬碟分割区" + +#: ../install_any.pm_.c:289 +msgid "Can't use broadcast with no NIS domain" +msgstr "" + +#: ../install_any.pm_.c:473 +msgid "Error reading file $f" +msgstr "" + +#: ../install_any.pm_.c:479 +#, c-format +msgid "Bad kickstart file %s (failed %s)" +msgstr "" + +#: ../install_steps.pm_.c:72 +msgid "" +"An error occurred, but I don't know how to handle it nicely.\n" +"Continue at your own risk." +msgstr "" + +#: ../install_steps.pm_.c:136 +#, c-format +msgid "Duplicate mount point %s" +msgstr "" + +#: ../install_steps.pm_.c:295 +#, fuzzy, c-format +msgid "Welcome to %s" +msgstr "欢迎来到 Crackers" + +#: ../install_steps.pm_.c:562 +msgid "No floppy drive available" +msgstr "" + +#: ../install_steps_auto_install.pm_.c:18 ../install_steps_stdio.pm_.c:26 +#, c-format +msgid "Entering step `%s'\n" +msgstr "" + +#: ../install_steps_graphical.pm_.c:259 ../install_steps_gtk.pm_.c:294 +msgid "You must have a swap partition" +msgstr "" + +#: ../install_steps_graphical.pm_.c:261 ../install_steps_gtk.pm_.c:296 +msgid "" +"You don't have a swap partition\n" +"\n" +"Continue anyway?" +msgstr "" + +#: ../install_steps_graphical.pm_.c:287 ../install_steps_gtk.pm_.c:317 +#, fuzzy +msgid "Choose the size you want to install" +msgstr "选取要安装的程式套件" + +#: ../install_steps_graphical.pm_.c:334 ../install_steps_gtk.pm_.c:361 +msgid "Total size: " +msgstr "总共大小:" + +#: ../install_steps_graphical.pm_.c:346 ../install_steps_gtk.pm_.c:373 +#: ../standalone/rpmdrake_.c:136 +#, c-format +msgid "Version: %s\n" +msgstr "版本: %s\n" + +#: ../install_steps_graphical.pm_.c:347 ../install_steps_gtk.pm_.c:374 +#: ../standalone/rpmdrake_.c:137 +#, c-format +msgid "Size: %d KB\n" +msgstr "大小: %d KB\n" + +#: ../install_steps_graphical.pm_.c:462 ../install_steps_gtk.pm_.c:489 +#, fuzzy +msgid "Choose the packages you want to install" +msgstr "选取要安装的程式套件" + +#: ../install_steps_graphical.pm_.c:465 ../install_steps_gtk.pm_.c:492 +msgid "Info" +msgstr "资讯" + +#: ../install_steps_graphical.pm_.c:473 ../install_steps_gtk.pm_.c:500 +#: ../install_steps_interactive.pm_.c:81 ../standalone/rpmdrake_.c:161 +msgid "Install" +msgstr "安装" + +#: ../install_steps_graphical.pm_.c:492 ../install_steps_gtk.pm_.c:519 +#: ../install_steps_interactive.pm_.c:317 +msgid "Installing" +msgstr "安装" + +#: ../install_steps_graphical.pm_.c:499 ../install_steps_gtk.pm_.c:526 +msgid "Please wait, " +msgstr "请稍候" + +#: ../install_steps_graphical.pm_.c:501 ../install_steps_gtk.pm_.c:528 +msgid "Time remaining " +msgstr "还需时间" + +#: ../install_steps_graphical.pm_.c:502 ../install_steps_gtk.pm_.c:529 +msgid "Total time " +msgstr "总共时间" + +#: ../install_steps_graphical.pm_.c:507 ../install_steps_gtk.pm_.c:534 +#: ../install_steps_interactive.pm_.c:317 +#, fuzzy +msgid "Preparing installation" +msgstr "正在准备 X-Window 的设定" + +#: ../install_steps_graphical.pm_.c:528 ../install_steps_gtk.pm_.c:549 +#, c-format +msgid "Installing package %s" +msgstr "安装程式" + +#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574 +msgid "Go on anyway?" +msgstr "仍然继续" + +#: ../install_steps_graphical.pm_.c:553 ../install_steps_gtk.pm_.c:574 +msgid "There was an error ordering packages:" +msgstr "安装程式时有错误" + +#: ../install_steps_graphical.pm_.c:577 ../install_steps_interactive.pm_.c:893 +#, fuzzy +msgid "Use existing configuration for X11?" +msgstr "测试设定值" + +#: ../install_steps_gtk.pm_.c:259 +msgid "" +"WARNING!\n" +"\n" +"DrakX now needs to resize your Windows partition. Be careful: this operation " +"is\n" +"dangerous. If you have not already done so, you should first exit the\n" +"installation, run scandisk under Windows (and optionally run defrag), then\n" +"restart the installation. You should also backup your data.\n" +"When sure, press Ok." +msgstr "" + +#: ../install_steps_gtk.pm_.c:278 +#, fuzzy +msgid "Automatic resizing failed" +msgstr "自动设定解析度" + +#: ../install_steps_gtk.pm_.c:312 +msgid "" +"Now that you've selected desired groups, please choose \n" +"how many packages you want, ranging from minimal to full \n" +"installation of each selected groups." +msgstr "" + +#: ../install_steps_gtk.pm_.c:315 +msgid "You will be able to choose more precisely in next step" +msgstr "下一个步骤你将可以更仔细的选择" + +#: ../install_steps_gtk.pm_.c:372 +msgid "Bad package" +msgstr "无效的程式" + +#: ../install_steps_gtk.pm_.c:522 +msgid "Estimating" +msgstr "推测" + +#: ../install_steps_gtk.pm_.c:544 +#, c-format +msgid "%d packages" +msgstr "%d 程式" + +#: ../install_steps_gtk.pm_.c:544 +msgid ", %U MB" +msgstr ", %U MB" + +#: ../install_steps_interactive.pm_.c:37 +#, fuzzy +msgid "An error occurred" +msgstr "发生错误∶" + +#: ../install_steps_interactive.pm_.c:54 +#, fuzzy +msgid "Which language do you want?" +msgstr "您打算怎么作 ?" + +#: ../install_steps_interactive.pm_.c:68 ../standalone/keyboarddrake_.c:22 +msgid "Keyboard" +msgstr "键盘" + +#: ../install_steps_interactive.pm_.c:69 ../standalone/keyboarddrake_.c:23 +#, fuzzy +msgid "What is your keyboard layout?" +msgstr "选取您使用的键盘形式" + +#: ../install_steps_interactive.pm_.c:79 +#, fuzzy +msgid "Install/Upgrade" +msgstr "安装开机启动程式" + +#: ../install_steps_interactive.pm_.c:80 +#, fuzzy +msgid "Is this an install or an upgrade?" +msgstr "选择安装新系统或升级原有系统" + +#: ../install_steps_interactive.pm_.c:81 +msgid "Upgrade" +msgstr "升级" + +#: ../install_steps_interactive.pm_.c:89 +#, fuzzy +msgid "Root Partition" +msgstr "根分割区" + +#: ../install_steps_interactive.pm_.c:90 +msgid "What is the root partition (/) of your system?" +msgstr "您的根分割区(/)是那一个 ?" + +#: ../install_steps_interactive.pm_.c:100 +msgid "Recommended" +msgstr "建议" + +#: ../install_steps_interactive.pm_.c:101 +msgid "Customized" +msgstr "自行设定" + +#: ../install_steps_interactive.pm_.c:102 +#, fuzzy +msgid "Expert" +msgstr "系统专家" + +#: ../install_steps_interactive.pm_.c:104 +#: ../install_steps_interactive.pm_.c:118 +#, fuzzy +msgid "Install Class" +msgstr "安装系统" + +#: ../install_steps_interactive.pm_.c:105 +#, fuzzy +msgid "What installation class do you want?" +msgstr "请选择想要安装的类别" + +#: ../install_steps_interactive.pm_.c:114 +#, fuzzy +msgid "Normal" +msgstr "格式化" + +#: ../install_steps_interactive.pm_.c:115 +#, fuzzy +msgid "Development" +msgstr "程式开发者" + +#: ../install_steps_interactive.pm_.c:116 +#, fuzzy +msgid "Server" +msgstr "伺服器" + +#: ../install_steps_interactive.pm_.c:119 +#, fuzzy +msgid "What usage do you want?" +msgstr "您打算怎么作 ?" + +#: ../install_steps_interactive.pm_.c:132 ../standalone/mousedrake_.c:25 +msgid "What is the type of your mouse?" +msgstr "请问您的滑鼠是那一种型式 ?" + +#: ../install_steps_interactive.pm_.c:140 ../standalone/mousedrake_.c:38 +msgid "Mouse Port" +msgstr "滑鼠连接埠" + +#: ../install_steps_interactive.pm_.c:141 ../standalone/mousedrake_.c:39 +msgid "Which serial port is your mouse connected to?" +msgstr "您的滑鼠是连接到那个序列埠 ?" + +#: ../install_steps_interactive.pm_.c:157 +#, fuzzy +msgid "no available partitions" +msgstr "格式化硬碟分割区" + +#: ../install_steps_interactive.pm_.c:159 +#, c-format +msgid "(%dMb)" +msgstr "%dMB" + +#: ../install_steps_interactive.pm_.c:166 +msgid "Which partition do you want to use as your root partition" +msgstr "请问您要用那一个分割区做为您的根分割区 ?" + +#: ../install_steps_interactive.pm_.c:173 +#, fuzzy +msgid "Choose the mount points" +msgstr "选取合适的萤幕" + +#: ../install_steps_interactive.pm_.c:185 +msgid "You need to reboot for the partition table modifications to take place" +msgstr "你将需要重新启动使改变生效" + +#: ../install_steps_interactive.pm_.c:207 +msgid "Choose the partitions you want to format" +msgstr "请选择您要格式化的分割区" + +#: ../install_steps_interactive.pm_.c:211 +msgid "Check bad blocks?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:230 +msgid "Looking for available packages" +msgstr "寻找可安装的程式" + +#: ../install_steps_interactive.pm_.c:236 +msgid "Finding packages to upgrade" +msgstr "寻程式以升级" + +#: ../install_steps_interactive.pm_.c:266 +#, c-format +msgid "" +"You need %dMB for a full install of the groups you selected.\n" +"You can go on anyway, but be warned that you won't get all packages" +msgstr "" + +#: ../install_steps_interactive.pm_.c:290 +msgid "Package Group Selection" +msgstr "程式群组选择" + +#: ../install_steps_interactive.pm_.c:326 +msgid "" +"Installing package %s\n" +"%d%%" +msgstr "安装程式" + +#: ../install_steps_interactive.pm_.c:335 +#, fuzzy +msgid "Post install configuration" +msgstr "测试设定值" + +#: ../install_steps_interactive.pm_.c:346 +#, fuzzy +msgid "Keep the current IP configuration" +msgstr "测试设定值" + +#: ../install_steps_interactive.pm_.c:347 +#, fuzzy +msgid "Reconfigure network now" +msgstr "设定网路连线" + +#: ../install_steps_interactive.pm_.c:348 +#: ../install_steps_interactive.pm_.c:360 +#, fuzzy +msgid "Do not set up networking" +msgstr "设定网路连线" + +#: ../install_steps_interactive.pm_.c:350 +#: ../install_steps_interactive.pm_.c:358 +#, fuzzy +msgid "Network Configuration" +msgstr "测试设定值" + +#: ../install_steps_interactive.pm_.c:351 +msgid "Local networking has already been configured. Do you want to:" +msgstr "区域网路已经设定好。请问您想要 :" + +#: ../install_steps_interactive.pm_.c:359 +#, fuzzy +msgid "Do you want to configure networking for your system?" +msgstr "您想要测试您的设定值吗 ?" + +#: ../install_steps_interactive.pm_.c:360 +msgid "Dialup with modem" +msgstr "使用数据机播接上网" + +#: ../install_steps_interactive.pm_.c:360 +msgid "Local LAN" +msgstr "区域网路" + +#: ../install_steps_interactive.pm_.c:369 +msgid "no network card found" +msgstr "找不到网路卡" + +#: ../install_steps_interactive.pm_.c:399 +#: ../install_steps_interactive.pm_.c:400 +#, fuzzy, c-format +msgid "Configuring network device %s" +msgstr "设定网路连线" + +#: ../install_steps_interactive.pm_.c:401 +msgid "" +"Please enter the IP configuration for this machine.\n" +"Each item should be entered as an IP address in dotted-decimal\n" +"notation (for example, 1.2.3.4)." +msgstr "请输入您电脑的 IP 设定请以 . 分隔，例如 1.2.3.4 " + +#: ../install_steps_interactive.pm_.c:404 +#, fuzzy +msgid "Automatic IP" +msgstr "自动设定解析度" + +#: ../install_steps_interactive.pm_.c:404 +msgid "IP address:" +msgstr "IP 位置" + +#: ../install_steps_interactive.pm_.c:404 +msgid "Netmask:" +msgstr "Netmask:" + +#: ../install_steps_interactive.pm_.c:405 +msgid "(bootp/dhcp)" +msgstr "(bootp/dhcp)" + +#: ../install_steps_interactive.pm_.c:411 ../printerdrake.pm_.c:149 +msgid "IP address should be in format 1.2.3.4" +msgstr "IP 位置的格式应该是 1.2.3.4" + +#: ../install_steps_interactive.pm_.c:429 +#, fuzzy +msgid "Configuring network" +msgstr "设定网路连线" + +#: ../install_steps_interactive.pm_.c:430 +msgid "" +"Please enter your host name.\n" +"Your host name should be a fully-qualified host name,\n" +"such as ``mybox.mylab.myco.com''.\n" +"You may also enter the IP address of the gateway if you have one" +msgstr "" +"请输入您机器的名称\n" +"你的机器名称必需是个合法的名称，例如 ``mybox.mylab.myco.com''\n" +"如果你有通讯闸的话，也请输入其 IP 位置" + +#: ../install_steps_interactive.pm_.c:434 +#, fuzzy +msgid "DNS server:" +msgstr "名称伺服器" + +#: ../install_steps_interactive.pm_.c:434 +#, fuzzy +msgid "Gateway device:" +msgstr "通讯闸装置" + +#: ../install_steps_interactive.pm_.c:434 +msgid "Gateway:" +msgstr "通讯闸" + +#: ../install_steps_interactive.pm_.c:434 +#, fuzzy +msgid "Host name:" +msgstr "机器名称:" + +#: ../install_steps_interactive.pm_.c:447 +#, fuzzy +msgid "Try to find a modem?" +msgstr "尝试寻找数据机" + +#: ../install_steps_interactive.pm_.c:457 +msgid "Which serial port is your modem connected to?" +msgstr "请问您的数据机是连接到那个序列埠 ?" + +#: ../install_steps_interactive.pm_.c:462 +msgid "Dialup options" +msgstr "播接选项" + +#: ../install_steps_interactive.pm_.c:463 +msgid "Connection name" +msgstr "连接名称" + +#: ../install_steps_interactive.pm_.c:464 +msgid "Phone number" +msgstr "电话号码" + +#: ../install_steps_interactive.pm_.c:465 +msgid "Login ID" +msgstr "登录帐号" + +#: ../install_steps_interactive.pm_.c:466 +#: ../install_steps_interactive.pm_.c:578 +#: ../install_steps_interactive.pm_.c:624 +#: ../install_steps_interactive.pm_.c:724 ../standalone/adduserdrake_.c:40 +msgid "Password" +msgstr "密码" + +#: ../install_steps_interactive.pm_.c:467 +msgid "Authentication" +msgstr "授权" + +#: ../install_steps_interactive.pm_.c:467 +msgid "CHAP" +msgstr "CHAP" + +#: ../install_steps_interactive.pm_.c:467 +msgid "PAP" +msgstr "PAP" + +#: ../install_steps_interactive.pm_.c:467 +msgid "Script-based" +msgstr "" + +#: ../install_steps_interactive.pm_.c:467 +msgid "Terminal-based" +msgstr "" + +#: ../install_steps_interactive.pm_.c:468 +#, fuzzy +msgid "Domain name" +msgstr "网域名称" + +#: ../install_steps_interactive.pm_.c:469 +msgid "First DNS Server" +msgstr "第一个名称伺服器" + +#: ../install_steps_interactive.pm_.c:470 +msgid "Second DNS Server" +msgstr "第二个名称伺服器" + +#: ../install_steps_interactive.pm_.c:483 +#, fuzzy +msgid "Bringing up the network" +msgstr "设定网路连线" + +#: ../install_steps_interactive.pm_.c:492 +msgid "" +"You have now the possibility to download software aimed for encryption.\n" +"\n" +"WARNING:\n" +"\n" +"Due to different general requirements applicable to these software and " +"imposed\n" +"by various jurisdictions, customer and/or end user of theses software " +"should\n" +"ensure that the laws of his/their jurisdiction allow him/them to download, " +"stock\n" +"and/or use these software.\n" +"\n" +"In addition customer and/or end user shall particularly be aware to not " +"infringe\n" +"the laws of his/their jurisdiction. Should customer and/or end user do not\n" +"respect the provision of these applicable laws, he/they will incur serious\n" +"sanctions.\n" +"\n" +"In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " +"liable\n" +"for special, indirect or incidental damages whatsoever (including, but not\n" +"limited to loss of profits, business interruption, loss of commercial data " +"and\n" +"other pecuniary losses, and eventual liabilities and indemnification to be " +"paid\n" +"pursuant to a court decision) arising out of use, possession, or the sole\n" +"downloading of these software, to which customer and/or end user could\n" +"eventually have access after having sign up the present agreement.\n" +"\n" +"\n" +"For any queries relating to these agreement, please contact \n" +"Mandrakesoft, Inc.\n" +"2400 N. Lincoln Avenue Suite 243\n" +"Altadena California 91001\n" +"USA" +msgstr "" + +#: ../install_steps_interactive.pm_.c:523 +msgid "Choose a mirror from which to get the packages" +msgstr "选择一个 mirror 站台来取得程式" + +#: ../install_steps_interactive.pm_.c:528 +msgid "Contacting the mirror to get the list of available packages" +msgstr "连接 mirror 站台以取得可供安装程式的列表" + +#: ../install_steps_interactive.pm_.c:532 +#, fuzzy +msgid "Which packages do you want to install" +msgstr "选取要安装的程式套件" + +#: ../install_steps_interactive.pm_.c:534 +msgid "Downloading cryptographic packages" +msgstr "" + +#: ../install_steps_interactive.pm_.c:544 +msgid "Which is your timezone?" +msgstr "请问您的时区是 ?" + +#: ../install_steps_interactive.pm_.c:545 +msgid "Is your hardware clock set to GMT?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:555 +#, fuzzy +msgid "Printer" +msgstr "装置:" + +#: ../install_steps_interactive.pm_.c:556 +msgid "Would you like to configure a printer?" +msgstr "您想要设定印表机吗 ?" + +#: ../install_steps_interactive.pm_.c:576 +#, fuzzy +msgid "No password" +msgstr "设定 root 密码" + +#: ../install_steps_interactive.pm_.c:576 +#: ../install_steps_interactive.pm_.c:798 ../interactive.pm_.c:74 +#: ../interactive.pm_.c:84 ../interactive.pm_.c:164 +#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97 +#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:192 ../my_gtk.pm_.c:425 +#: ../my_gtk.pm_.c:525 +msgid "Ok" +msgstr "确定" + +#: ../install_steps_interactive.pm_.c:579 +#: ../install_steps_interactive.pm_.c:625 +#: ../install_steps_interactive.pm_.c:725 ../standalone/adduserdrake_.c:41 +msgid "Password (again)" +msgstr "密码" + +#: ../install_steps_interactive.pm_.c:581 +msgid "Use shadow file" +msgstr "" + +#: ../install_steps_interactive.pm_.c:581 +msgid "shadow" +msgstr "" + +#: ../install_steps_interactive.pm_.c:582 +msgid "MD5" +msgstr "" + +#: ../install_steps_interactive.pm_.c:582 +#, fuzzy +msgid "Use MD5 passwords" +msgstr "设定 root 密码" + +#: ../install_steps_interactive.pm_.c:584 +msgid "Use NIS" +msgstr "" + +#: ../install_steps_interactive.pm_.c:584 +msgid "yellow pages" +msgstr "" + +#: ../install_steps_interactive.pm_.c:588 +#: ../install_steps_interactive.pm_.c:636 +#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52 +#, fuzzy +msgid "Please try again" +msgstr "再次测试设定值" + +#: ../install_steps_interactive.pm_.c:588 +#: ../install_steps_interactive.pm_.c:636 +#: ../install_steps_interactive.pm_.c:736 ../standalone/adduserdrake_.c:52 +msgid "The passwords do not match" +msgstr "密码不同" + +#: ../install_steps_interactive.pm_.c:590 +#, c-format +msgid "This password is too simple (must be at least %d characters long)" +msgstr "" + +#: ../install_steps_interactive.pm_.c:597 +msgid "Authentification NIS" +msgstr "授权的 NIS" + +#: ../install_steps_interactive.pm_.c:598 +msgid "NIS Domain" +msgstr "NIS 网域" + +#: ../install_steps_interactive.pm_.c:598 +#, fuzzy +msgid "NIS Server" +msgstr "NIS 伺服器" + +#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34 +msgid "Accept user" +msgstr "接受使用者" + +#: ../install_steps_interactive.pm_.c:618 ../standalone/adduserdrake_.c:34 +#, fuzzy +msgid "Add user" +msgstr "增加一个一般使用者" + +#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35 +#, c-format +msgid "(already added %s)" +msgstr "(已经增加了 %s)" + +#: ../install_steps_interactive.pm_.c:619 ../standalone/adduserdrake_.c:35 +#, c-format +msgid "" +"Enter a user\n" +"%s" +msgstr "" +"请输入一个使用者\n" +"%s" + +#: ../install_steps_interactive.pm_.c:621 ../standalone/adduserdrake_.c:37 +#, fuzzy +msgid "Real name" +msgstr "更新" + +#: ../install_steps_interactive.pm_.c:622 ../standalone/adduserdrake_.c:38 +#, fuzzy +msgid "User name" +msgstr "更新" + +#: ../install_steps_interactive.pm_.c:627 ../standalone/adduserdrake_.c:43 +#, fuzzy +msgid "Shell" +msgstr "显示全部" + +#: ../install_steps_interactive.pm_.c:637 ../standalone/adduserdrake_.c:53 +msgid "This password is too simple" +msgstr "密码太简单" + +#: ../install_steps_interactive.pm_.c:638 ../standalone/adduserdrake_.c:54 +msgid "Please give a user name" +msgstr "请输入使用使用者名称" + +#: ../install_steps_interactive.pm_.c:639 ../standalone/adduserdrake_.c:55 +msgid "" +"The user name must contain only lower cased letters, numbers, `-' and `_'" +msgstr "使用者名称只能有小写字母、数字，`-' 和 `_'" + +#: ../install_steps_interactive.pm_.c:640 ../standalone/adduserdrake_.c:56 +msgid "This user name is already added" +msgstr "这个使用者名称已经有了" + +#: ../install_steps_interactive.pm_.c:659 +#, fuzzy +msgid "First drive" +msgstr "第一个名称伺服器" + +#: ../install_steps_interactive.pm_.c:660 +#, fuzzy +msgid "Second drive" +msgstr "第二个名称伺服器" + +#: ../install_steps_interactive.pm_.c:661 +msgid "Skip" +msgstr "略过" + +#: ../install_steps_interactive.pm_.c:666 +msgid "" +"A custom bootdisk provides a way of booting into your Linux system without\n" +"depending on the normal bootloader. This is useful if you don't want to " +"install\n" +"LILO on your system, or another operating system removes LILO, or LILO " +"doesn't\n" +"work with your hardware configuration. A custom bootdisk can also be used " +"with\n" +"the Mandrake rescue image, making it much easier to recover from severe " +"system\n" +"failures. Would you like to create a bootdisk for your system?" +msgstr "" + +#: ../install_steps_interactive.pm_.c:675 +msgid "Sorry, no floppy drive available" +msgstr "抱歉，您没有软碟机" + +#: ../install_steps_interactive.pm_.c:678 +msgid "Choose the floppy drive you want to use to make the bootdisk" +msgstr "选择您要制作开机磁片的软碟机" + +#: ../install_steps_interactive.pm_.c:683 +#, c-format +msgid "Insert a floppy in drive %s" +msgstr "请插入一张磁片" + +#: ../install_steps_interactive.pm_.c:684 +#: ../install_steps_interactive.pm_.c:1042 +#, fuzzy +msgid "Creating bootdisk" +msgstr "制作一张开机磁片" + +#: ../install_steps_interactive.pm_.c:691 +#, fuzzy +msgid "Preparing bootloader" +msgstr "安装开机启动程式" + +#: ../install_steps_interactive.pm_.c:703 +msgid "First sector of boot partition" +msgstr "开机分割区的第一轨" + +#: ../install_steps_interactive.pm_.c:703 +msgid "First sector of drive (MBR)" +msgstr "磁碟机的第一轨 (MBR)" + +#: ../install_steps_interactive.pm_.c:708 +msgid "LILO Installation" +msgstr "LILO 安装" + +#: ../install_steps_interactive.pm_.c:709 +#, fuzzy +msgid "Where do you want to install the bootloader?" +msgstr "您想要测试您的设定值吗 ?" + +#: ../install_steps_interactive.pm_.c:715 +#, fuzzy +msgid "Do you want to use LILO?" +msgstr "您打算怎么作 ?" + +#: ../install_steps_interactive.pm_.c:718 +#, fuzzy +msgid "Boot device" +msgstr "缺少输入装置" + +#: ../install_steps_interactive.pm_.c:719 +msgid "Linear (needed for some SCSI drives)" +msgstr " 线性 (需要一些 SCSI 装置)" + +#: ../install_steps_interactive.pm_.c:719 +#, fuzzy +msgid "linear" +msgstr "线性" + +#: ../install_steps_interactive.pm_.c:720 +#, fuzzy +msgid "Compact" +msgstr "格式化" + +#: ../install_steps_interactive.pm_.c:720 +#, fuzzy +msgid "compact" +msgstr "格式化" + +#: ../install_steps_interactive.pm_.c:721 +msgid "Delay before booting default image" +msgstr "开机等候时间" + +#: ../install_steps_interactive.pm_.c:722 +msgid "Video mode" +msgstr "萤幕模式" + +#: ../install_steps_interactive.pm_.c:726 +msgid "Restrict command line options" +msgstr "限定参数选项" + +#: ../install_steps_interactive.pm_.c:726 +msgid "restrict" +msgstr "限定" + +#: ../install_steps_interactive.pm_.c:732 +msgid "LILO main options" +msgstr "LILO 主选项" + +#: ../install_steps_interactive.pm_.c:735 +msgid "" +"Option ``Restrict command line options'' is of no use without a password" +msgstr "没有密码不能使用 ``限定参数选项''" + +#: ../install_steps_interactive.pm_.c:746 +msgid "" +"Here are the following entries in LILO.\n" +"You can add some more or change the existing ones." +msgstr "您可以增加或是更改已存在的选项" + +#: ../install_steps_interactive.pm_.c:748 ../standalone/rpmdrake_.c:302 +msgid "Add" +msgstr "增加" + +#: ../install_steps_interactive.pm_.c:757 +msgid "Linux" +msgstr "Linux" + +#: ../install_steps_interactive.pm_.c:757 +msgid "Other OS (windows...)" +msgstr "其他作业系统 (windows...)" + +#: ../install_steps_interactive.pm_.c:757 +#, fuzzy +msgid "Which type of entry do you want to add" +msgstr "您打算怎么作 ?" + +#: ../install_steps_interactive.pm_.c:777 +msgid "Image" +msgstr "" + +#: ../install_steps_interactive.pm_.c:778 +#: ../install_steps_interactive.pm_.c:786 +msgid "Root" +msgstr "" + +#: ../install_steps_interactive.pm_.c:779 +msgid "Append" +msgstr "" + +#: ../install_steps_interactive.pm_.c:780 +msgid "Initrd" +msgstr "" + +#: ../install_steps_interactive.pm_.c:781 +msgid "Read-write" +msgstr "" + +#: ../install_steps_interactive.pm_.c:787 +#, fuzzy +msgid "Table" +msgstr "可缩放" + +#: ../install_steps_interactive.pm_.c:788 +msgid "Unsafe" +msgstr "" + +#: ../install_steps_interactive.pm_.c:793 +msgid "Label" +msgstr "名称" + +#: ../install_steps_interactive.pm_.c:795 +#, fuzzy +msgid "Default" +msgstr "删除" + +#: ../install_steps_interactive.pm_.c:798 +msgid "Remove entry" +msgstr "移除选项" + +#: ../install_steps_interactive.pm_.c:801 +msgid "Empty label not allowed" +msgstr "不能有空的名称" + +#: ../install_steps_interactive.pm_.c:802 +msgid "This label is already in use" +msgstr "这个名称已经有使用了" + +#: ../install_steps_interactive.pm_.c:803 +#, c-format +msgid "A entry %s already exists" +msgstr "这个项目 %s 已经存在了" + +#: ../install_steps_interactive.pm_.c:817 +msgid "Installation of LILO failed. The following error occured:" +msgstr "安装 LILO 失败，出现下列错误:" + +#: ../install_steps_interactive.pm_.c:831 +msgid "Proxies configuration" +msgstr "代理伺服器设定" + +#: ../install_steps_interactive.pm_.c:832 +msgid "HTTP proxy" +msgstr "HTTP 代理伺服器" + +#: ../install_steps_interactive.pm_.c:833 +msgid "FTP proxy" +msgstr "FTP 代理伺服器" + +#: ../install_steps_interactive.pm_.c:839 +msgid "Proxy should be http://..." +msgstr "代理伺服器应该是象 http://..." + +#: ../install_steps_interactive.pm_.c:840 +msgid "Proxy should be ftp://..." +msgstr "代理伺服器应该是象 ftp://..." + +#: ../install_steps_interactive.pm_.c:850 ../standalone/draksec_.c:20 +msgid "Welcome To Crackers" +msgstr "欢迎来到 Crackers" + +#: ../install_steps_interactive.pm_.c:851 ../standalone/draksec_.c:21 +msgid "Poor" +msgstr "差" + +#: ../install_steps_interactive.pm_.c:852 ../standalone/draksec_.c:22 +msgid "Low" +msgstr "低" + +#: ../install_steps_interactive.pm_.c:853 ../standalone/draksec_.c:23 +msgid "Medium" +msgstr "中" + +#: ../install_steps_interactive.pm_.c:854 ../standalone/draksec_.c:24 +msgid "High" +msgstr "高" + +#: ../install_steps_interactive.pm_.c:855 ../standalone/draksec_.c:25 +msgid "Paranoid" +msgstr "偏执" + +#: ../install_steps_interactive.pm_.c:868 +msgid "Miscellaneous questions" +msgstr "其他问题" + +#: ../install_steps_interactive.pm_.c:869 +msgid "(may cause data corruption)" +msgstr "(可能会导致资料损毁)" + +#: ../install_steps_interactive.pm_.c:869 +msgid "Use hard drive optimisations?" +msgstr "使用硬碟最佳化" + +#: ../install_steps_interactive.pm_.c:870 ../standalone/draksec_.c:46 +msgid "Choose security level" +msgstr "选择安全层级" + +#: ../install_steps_interactive.pm_.c:871 +#, c-format +msgid "Precise RAM size if needed (found %d MB)" +msgstr "精确的记忆体大小(如果需要的话) (找到 %dMB)" + +#: ../install_steps_interactive.pm_.c:872 +msgid "Removable media automounting" +msgstr "移除媒体自动安插" + +#: ../install_steps_interactive.pm_.c:874 +msgid "Enable num lock at startup" +msgstr "开机时打亭 num lock" + +#: ../install_steps_interactive.pm_.c:877 +msgid "Give the ram size in Mb" +msgstr "用 Mb 指定记忆体大小" + +#: ../install_steps_interactive.pm_.c:905 +#: ../install_steps_interactive.pm_.c:1075 +#, fuzzy +msgid "Try to find PCI devices?" +msgstr "尝试寻找 PCI 装置 ?" + +#: ../install_steps_interactive.pm_.c:920 +msgid "" +"Some steps are not completed.\n" +"\n" +"Do you really want to quit now?" +msgstr "" +"有些步骤并不完全\n" +"您想要现在就离开吗 ?" + +#: ../install_steps_interactive.pm_.c:927 +msgid "" +"Congratulations, installation is complete.\n" +"Remove the boot media and press return to reboot.\n" +"\n" +"For information on fixes which are available for this release of " +"Linux-Mandrake,\n" +"consult the Errata available from http://www.linux-mandrake.com/.\n" +"\n" +"Information on configuring your system is available in the post\n" +"install chapter of the Official Linux-Mandrake User's Guide." +msgstr "" +"恭喜 ! 安装完成!\n" +"请移除开机的光碟或磁片，并按下 return 以重新开机。\n" +"您可以到 http://www.linux-mandrake.com/ 找到更多讯息\n" +"如何设定请参考 Official Linux-Mandrake 使用者手册的 post install 这一章" + +#: ../install_steps_interactive.pm_.c:936 +msgid "Shutting down" +msgstr "关机" + +#: ../install_steps_interactive.pm_.c:950 +#, c-format +msgid "Installing driver for %s card %s" +msgstr "安装 %s 卡的驱动程式" + +#: ../install_steps_interactive.pm_.c:951 +#, c-format +msgid "(module %s)" +msgstr "(模组 %s)" + +#: ../install_steps_interactive.pm_.c:961 +#, c-format +msgid "Which %s driver should I try?" +msgstr "请问要尝试那个驱动程式 ?" + +#: ../install_steps_interactive.pm_.c:969 +#, c-format +msgid "" +"In some cases, the %s driver needs to have extra information to work\n" +"properly, although it normally works fine without. Would you like to " +"specify\n" +"extra options for it or allow the driver to probe your machine for the\n" +"information it needs? Occasionally, probing will hang a computer, but it " +"should\n" +"not cause any damage." +msgstr "" + +#: ../install_steps_interactive.pm_.c:974 +msgid "Autoprobe" +msgstr "自动侦测" + +#: ../install_steps_interactive.pm_.c:974 +msgid "Specify options" +msgstr "指定参数" + +#: ../install_steps_interactive.pm_.c:978 +#, c-format +msgid "You may now provide its options to module %s." +msgstr "您可以提供此模组的参数" + +#: ../install_steps_interactive.pm_.c:984 +#, c-format +msgid "" +"You may now provide its options to module %s.\n" +"Options are in format ``name=value name2=value2 ...''.\n" +"For instance, ``io=0x300 irq=7''" +msgstr "" +"你可以提供此模组的参数。格式是 ``name=value name2=value2...'' \n" +"例如， ``io=0x300 irq=7''" + +#: ../install_steps_interactive.pm_.c:987 +msgid "Module options:" +msgstr "模组参数" + +#: ../install_steps_interactive.pm_.c:997 +#, c-format +msgid "" +"Loading module %s failed.\n" +"Do you want to try again with other parameters?" +msgstr "您要尝试其他的参数吗 ?" + +#: ../install_steps_interactive.pm_.c:1010 +msgid "Try to find PCMCIA cards?" +msgstr "尝式寻找 PCMCIA 配接卡" + +#: ../install_steps_interactive.pm_.c:1011 +msgid "Configuring PCMCIA cards..." +msgstr "设定PCMCIA 配接卡" + +#: ../install_steps_interactive.pm_.c:1011 +msgid "PCMCIA" +msgstr "PCMCIA" + +#: ../install_steps_interactive.pm_.c:1018 +msgid "" +"Linux does not yet fully support ultra dma 66 HPT.\n" +"As a work-around i can make a custom floppy giving access the hard drive on " +"ide2 and ide3" +msgstr "" + +#: ../install_steps_interactive.pm_.c:1039 +#, fuzzy +msgid "" +"Enter a floppy to create an HTP enabled boot\n" +"(all data on floppy will be lost)" +msgstr "" +"请插入一张磁片\n" +"所有在这个分割区上的资料都会被清除" + +#: ../install_steps_interactive.pm_.c:1056 +msgid "It is necessary to restart installation booting on the floppy" +msgstr "" + +#: ../install_steps_interactive.pm_.c:1057 +msgid "It is necessary to restart installation with the new parameters" +msgstr "" + +#: ../install_steps_interactive.pm_.c:1061 +#, c-format +msgid "" +"Failed to create an HTP boot floppy.\n" +"You may have to restart installation and give ``%s'' at the prompt" +msgstr "" + +#: ../install_steps_interactive.pm_.c:1081 +#, c-format +msgid "Found %s %s interfaces" +msgstr "找到 %s %s 介面" + +#: ../install_steps_interactive.pm_.c:1082 +msgid "Do you have another one?" +msgstr "您有其他的配接卡吗 ?" + +#: ../install_steps_interactive.pm_.c:1083 +#, c-format +msgid "Do you have any %s interface?" +msgstr "您还有其他 % 介面吗 ?" + +#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79 +#: ../my_gtk.pm_.c:424 ../printerdrake.pm_.c:176 +msgid "No" +msgstr "没有" + +#: ../install_steps_interactive.pm_.c:1085 ../interactive.pm_.c:79 +#: ../my_gtk.pm_.c:424 +msgid "Yes" +msgstr "有" + +#: ../install_steps_interactive.pm_.c:1086 +msgid "See hardware info" +msgstr "参考硬体资讯" + +#: ../install_steps_newt.pm_.c:19 +#, c-format +msgid "Linux-Mandrake Installation %s" +msgstr "Linux-Mandrake 安装" + +#: ../install_steps_newt.pm_.c:30 +msgid "" +" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " +msgstr " <Tab>/<Alt-Tab> 选项与选项间 | <Space> 选择 | <F12> 下个画面 " + +#: ../interactive.pm_.c:84 ../interactive.pm_.c:163 +#: ../interactive_newt.pm_.c:50 ../interactive_newt.pm_.c:97 +#: ../interactive_stdio.pm_.c:27 ../my_gtk.pm_.c:193 ../my_gtk.pm_.c:425 +msgid "Cancel" +msgstr "取消" + +#: ../interactive.pm_.c:181 +msgid "Please wait" +msgstr "请稍候" + +#: ../interactive_stdio.pm_.c:35 +#, c-format +msgid "Ambiguity (%s), be more precise\n" +msgstr "含糊不清 (%s) ，请更精确\n" + +#: ../interactive_stdio.pm_.c:36 ../interactive_stdio.pm_.c:51 +#: ../interactive_stdio.pm_.c:70 +msgid "Bad choice, try again\n" +msgstr "确误的选择，请重试\n" + +#: ../interactive_stdio.pm_.c:39 +#, c-format +msgid " ? (default %s) " +msgstr "? (内定 %s) " + +#: ../interactive_stdio.pm_.c:52 +#, c-format +msgid "Your choice? (default %s) " +msgstr "您的选择 ? (内定 %s) " + +#: ../interactive_stdio.pm_.c:71 +#, c-format +msgid "Your choice? (default %s enter `none' for none) " +msgstr "你的选择 ? (内定 %s 输入 `none' 如果没有的话) " + +#: ../keyboard.pm_.c:88 +#, fuzzy +msgid "Armenian" +msgstr "罗马体" + +#: ../keyboard.pm_.c:89 +msgid "Belgian" +msgstr "" + +#: ../keyboard.pm_.c:90 +msgid "Bulgarian" +msgstr "" + +#: ../keyboard.pm_.c:91 +msgid "Brazilian" +msgstr "" + +#: ../keyboard.pm_.c:92 +msgid "Swiss (French layout)" +msgstr "" + +#: ../keyboard.pm_.c:93 +msgid "Swiss (German layout)" +msgstr "" + +#: ../keyboard.pm_.c:94 +msgid "Czech" +msgstr "" + +#: ../keyboard.pm_.c:95 +#, fuzzy +msgid "German" +msgstr "罗马体" + +#: ../keyboard.pm_.c:96 +msgid "Danish" +msgstr "" + +#: ../keyboard.pm_.c:97 +msgid "Dvorak" +msgstr "" + +#: ../keyboard.pm_.c:98 +msgid "Estonian" +msgstr "" + +#: ../keyboard.pm_.c:99 +msgid "Spanish" +msgstr "" + +#: ../keyboard.pm_.c:100 +msgid "Finnish" +msgstr "" + +#: ../keyboard.pm_.c:101 +msgid "French" +msgstr "" + +#: ../keyboard.pm_.c:102 +msgid "Georgian (\"Russian\" layout)" +msgstr "" + +#: ../keyboard.pm_.c:103 +msgid "Georgian (\"Latin\" layout)" +msgstr "" + +#: ../keyboard.pm_.c:104 +#, fuzzy +msgid "Greek" +msgstr "绿:" + +#: ../keyboard.pm_.c:105 +msgid "Hungarian" +msgstr "" + +#: ../keyboard.pm_.c:106 +msgid "Israeli" +msgstr "" + +#: ../keyboard.pm_.c:107 +msgid "Israeli (Phonetic)" +msgstr "" + +#: ../keyboard.pm_.c:108 +msgid "Icelandic" +msgstr "" + +#: ../keyboard.pm_.c:109 +#, fuzzy +msgid "Italian" +msgstr "斜体" + +#: ../keyboard.pm_.c:110 +msgid "Latin American" +msgstr "" + +#: ../keyboard.pm_.c:111 +msgid "Dutch" +msgstr "" + +#: ../keyboard.pm_.c:112 +msgid "Lithuanian AZERTY" +msgstr "" + +#: ../keyboard.pm_.c:113 +msgid "Lithuanian \"number row\" QWERTY" +msgstr "" + +#: ../keyboard.pm_.c:114 +msgid "Lithuanian \"phonetic\" QWERTY" +msgstr "" + +#: ../keyboard.pm_.c:115 +msgid "Norwegian" +msgstr "" + +#: ../keyboard.pm_.c:116 +msgid "Polish (qwerty layout)" +msgstr "" + +#: ../keyboard.pm_.c:117 +msgid "Polish (qwertz layout)" +msgstr "" + +#: ../keyboard.pm_.c:118 +msgid "Portuguese" +msgstr "" + +#: ../keyboard.pm_.c:119 +msgid "Canadian (Quebec)" +msgstr "" + +#: ../keyboard.pm_.c:120 +msgid "Russian" +msgstr "" + +#: ../keyboard.pm_.c:121 +msgid "Russian (Yawerty)" +msgstr "" + +#: ../keyboard.pm_.c:122 +msgid "Swedish" +msgstr "" + +#: ../keyboard.pm_.c:123 +msgid "Slovenian" +msgstr "" + +#: ../keyboard.pm_.c:124 +msgid "Slovakian" +msgstr "" + +#: ../keyboard.pm_.c:125 +msgid "Thai keyboard" +msgstr "" + +#: ../keyboard.pm_.c:126 +msgid "Turkish (traditional \"F\" model)" +msgstr "" + +#: ../keyboard.pm_.c:127 +msgid "Turkish (modern \"Q\" model)" +msgstr "" + +#: ../keyboard.pm_.c:128 +msgid "Ukrainian" +msgstr "" + +#: ../keyboard.pm_.c:129 +msgid "UK keyboard" +msgstr "" + +#: ../keyboard.pm_.c:130 +msgid "US keyboard" +msgstr "" + +#: ../keyboard.pm_.c:131 +msgid "US keyboard (international)" +msgstr "" + +#: ../keyboard.pm_.c:132 +msgid "Yugoslavian (latin layout)" +msgstr "" + +# NOTE: this message will be displayed by lilo at boot time; that is +# using the BIOS font; that means cp437 charset on 99.99% of PC computers +# out there. It is then suggested that for non latin languages an ascii +# transliteration be used; or maybe the english text be used; as it is best +# When possible cp437 accentuated letters can be used too. +# +#: ../lilo.pm_.c:145 +#, c-format +msgid "" +"Welcome to LILO the operating system chooser!\n" +"\n" +"To list the possible choices, press <TAB>.\n" +"\n" +"To load one of them, write its name and press <ENTER> or wait %d seconds for " +"default boot.\n" +"\n" +msgstr "" + +#: ../mouse.pm_.c:20 +msgid "No Mouse" +msgstr "没有滑鼠" + +#: ../mouse.pm_.c:21 +msgid "Microsoft Rev 2.1A or higher (serial)" +msgstr "" + +#: ../mouse.pm_.c:22 +msgid "Logitech CC Series (serial)" +msgstr "" + +#: ../mouse.pm_.c:23 +msgid "Logitech MouseMan+/FirstMouse+ (serial)" +msgstr "" + +#: ../mouse.pm_.c:24 +msgid "ASCII MieMouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:25 +msgid "Genius NetMouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:26 +msgid "Microsoft IntelliMouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:27 +msgid "MM Series (serial)" +msgstr "" + +#: ../mouse.pm_.c:28 +msgid "MM HitTablet (serial)" +msgstr "" + +#: ../mouse.pm_.c:29 +msgid "Logitech Mouse (serial, old C7 type)" +msgstr "" + +#: ../mouse.pm_.c:30 +msgid "Logitech MouseMan/FirstMouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:31 +msgid "Generic Mouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:32 +msgid "Microsoft compatible (serial)" +msgstr "" + +#: ../mouse.pm_.c:33 +msgid "Generic 3 Button Mouse (serial)" +msgstr "" + +#: ../mouse.pm_.c:34 +msgid "Mouse Systems (serial)" +msgstr "" + +#: ../mouse.pm_.c:35 +msgid "Generic Mouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:36 +msgid "Logitech MouseMan/FirstMouse (ps/2)" +msgstr "" + +#: ../mouse.pm_.c:37 +msgid "Generic 3 Button Mouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:38 +msgid "ALPS GlidePoint (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:39 +msgid "Logitech MouseMan+/FirstMouse+ (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:40 +msgid "Kensington Thinking Mouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:41 +msgid "ASCII MieMouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:42 +msgid "Genius NetMouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:43 +msgid "Genius NetMouse Pro (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:44 +msgid "Genius NetScroll (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:45 +msgid "Microsoft IntelliMouse (PS/2)" +msgstr "" + +#: ../mouse.pm_.c:46 +msgid "ATI Bus Mouse" +msgstr "" + +#: ../mouse.pm_.c:47 +msgid "Microsoft Bus Mouse" +msgstr "" + +#: ../mouse.pm_.c:48 +msgid "Logitech Bus Mouse" +msgstr "" + +#: ../mouse.pm_.c:49 +msgid "USB Mouse" +msgstr "" + +#: ../mouse.pm_.c:50 +msgid "USB Mouse (3 buttons or more)" +msgstr "" + +#: ../partition_table.pm_.c:486 +msgid "" +"You have a hole in your partition table but I can't use it.\n" +"The only solution is to move your primary partitions to have the hole next " +"to the extended partitions" +msgstr "" + +#: ../partition_table.pm_.c:572 +#, c-format +msgid "Error reading file %s" +msgstr "请取 %s 档案错误 " + +#: ../partition_table.pm_.c:579 +#, c-format +msgid "Restoring from file %s failed: %s" +msgstr "从档案 %s 回复失败" + +#: ../partition_table.pm_.c:581 +msgid "Bad backup file" +msgstr "错误的备份档案" + +#: ../partition_table.pm_.c:602 +#, c-format +msgid "Error writing to file %s" +msgstr "写入档案失败" + +#: ../placeholder.pm_.c:5 +#, fuzzy +msgid "Show less" +msgstr "显示全部" + +#: ../placeholder.pm_.c:6 +msgid "Show more" +msgstr "" + +#: ../printer.pm_.c:244 +msgid "Local printer" +msgstr "本机印表机" + +#: ../printer.pm_.c:245 +msgid "Remote lpd" +msgstr "远端印表机" + +#: ../printer.pm_.c:246 +msgid "SMB/Windows 95/98/NT" +msgstr "" + +#: ../printer.pm_.c:247 +msgid "NetWare" +msgstr "" + +#: ../printerdrake.pm_.c:75 +msgid "Local Printer Options" +msgstr "本机印表机选项" + +#: ../printerdrake.pm_.c:76 +msgid "" +"Every print queue (which print jobs are directed to) needs a\n" +"name (often lp) and a spool directory associated with it. What\n" +"name and directory should be used for this queue?" +msgstr "" + +#: ../printerdrake.pm_.c:79 +msgid "Name of queue:" +msgstr "" + +#: ../printerdrake.pm_.c:79 +msgid "Spool directory:" +msgstr "" + +#: ../printerdrake.pm_.c:90 +msgid "Select Printer Connection" +msgstr "" + +#: ../printerdrake.pm_.c:91 +msgid "How is the printer connected?" +msgstr "" + +#: ../printerdrake.pm_.c:99 +msgid "Detecting devices..." +msgstr "" + +#: ../printerdrake.pm_.c:99 +msgid "Test ports" +msgstr "" + +#: ../printerdrake.pm_.c:112 +#, c-format +msgid "A printer, model \"%s\", has been detected on " +msgstr "" + +#: ../printerdrake.pm_.c:119 +#, fuzzy +msgid "Local Printer Device" +msgstr "缺少输入装置" + +#: ../printerdrake.pm_.c:120 +msgid "" +"What device is your printer connected to \n" +"(note that /dev/lp0 is equivalent to LPT1:)?\n" +msgstr "" + +#: ../printerdrake.pm_.c:121 +#, fuzzy +msgid "Printer Device:" +msgstr "装置:" + +#: ../printerdrake.pm_.c:125 +msgid "Remote lpd Printer Options" +msgstr "远端印表机选项" + +#: ../printerdrake.pm_.c:126 +msgid "" +"To use a remote lpd print queue, you need to supply\n" +"the hostname of the printer server and the queue name\n" +"on that server which jobs should be placed in." +msgstr "" + +#: ../printerdrake.pm_.c:129 +#, fuzzy +msgid "Remote hostname:" +msgstr "要求的主机名称:" + +#: ../printerdrake.pm_.c:129 +msgid "Remote queue" +msgstr "" + +#: ../printerdrake.pm_.c:134 +msgid "SMB (Windows 9x/NT) Printer Options" +msgstr "" + +#: ../printerdrake.pm_.c:135 +msgid "" +"To print to a SMB printer, you need to provide the\n" +"SMB host name (Note! It may be different from its\n" +"TCP/IP hostname!) and possibly the IP address of the print server, as\n" +"well as the share name for the printer you wish to access and any\n" +"applicable user name, password, and workgroup information." +msgstr "" + +#: ../printerdrake.pm_.c:140 +msgid "SMB server IP:" +msgstr "SMB 伺服器 IP" + +#: ../printerdrake.pm_.c:140 +msgid "SMB server host:" +msgstr "SMB 伺服器 名称" + +#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163 +msgid "Password:" +msgstr "密码" + +#: ../printerdrake.pm_.c:141 +#, fuzzy +msgid "Share name:" +msgstr "目录名称:" + +#: ../printerdrake.pm_.c:141 ../printerdrake.pm_.c:163 +#, fuzzy +msgid "User name:" +msgstr "目录名称:" + +#: ../printerdrake.pm_.c:142 +msgid "Workgroup:" +msgstr "群组" + +#: ../printerdrake.pm_.c:157 +msgid "NetWare Printer Options" +msgstr "" + +#: ../printerdrake.pm_.c:158 +msgid "" +"To print to a NetWare printer, you need to provide the\n" +"NetWare print server name (Note! it may be different from its\n" +"TCP/IP hostname!) as well as the print queue name for the printer you\n" +"wish to access and any applicable user name and password." +msgstr "" + +#: ../printerdrake.pm_.c:162 +msgid "Print Queue Name:" +msgstr "" + +#: ../printerdrake.pm_.c:162 +#, fuzzy +msgid "Printer Server:" +msgstr "点阵大小:" + +#: ../printerdrake.pm_.c:173 +msgid "Yes, print ASCII test page" +msgstr "是，列印 ASCII 测式页" + +#: ../printerdrake.pm_.c:174 +msgid "Yes, print PostScript test page" +msgstr "是，列印 PostScript 测式页" + +#: ../printerdrake.pm_.c:175 +msgid "Yes, print both test pages" +msgstr "是，列印两种测式页" + +#: ../printerdrake.pm_.c:183 +msgid "Configure Printer" +msgstr "设定印表机" + +#: ../printerdrake.pm_.c:184 +msgid "What type of printer do you have?" +msgstr "请问您印表机的型号 ?" + +#: ../printerdrake.pm_.c:204 +msgid "Printer options" +msgstr "印表机选项" + +#: ../printerdrake.pm_.c:205 +#, fuzzy +msgid "Paper Size" +msgstr "象素大小:" + +#: ../printerdrake.pm_.c:206 +msgid "Eject page after job?" +msgstr "" + +#: ../printerdrake.pm_.c:209 +msgid "Fix stair-stepping text?" +msgstr "" + +#: ../printerdrake.pm_.c:212 +msgid "Uniprint driver options" +msgstr "" + +#: ../printerdrake.pm_.c:213 +msgid "Color depth options" +msgstr "" + +#: ../printerdrake.pm_.c:223 +msgid "Do you want to test printing?" +msgstr "" + +#: ../printerdrake.pm_.c:234 +msgid "Printing test page(s)..." +msgstr "" + +#: ../printerdrake.pm_.c:252 +#, c-format +msgid "" +"Test page(s) have been sent to the printer daemon.\n" +"This may take a little time before printer start.\n" +"Printing status:\n" +"%s\n" +"\n" +"Does it work properly?" +msgstr "请问印表机列印正常吗 ?" + +#: ../printerdrake.pm_.c:256 +msgid "" +"Test page(s) have been sent to the printer daemon.\n" +"This may take a little time before printer start.\n" +"Does it work properly?" +msgstr "" +"测式页已经送出，可能需要一点时间列印\n" +"请问印表机列印正常吗 ?" + +#: ../raid.pm_.c:36 +#, c-format +msgid "Can't add a partition to _formatted_ RAID md%d" +msgstr "无法加入一个分割区到已经格式话的磁碟阵列 md%d" + +#: ../raid.pm_.c:106 +msgid "Can't write file $file" +msgstr "无法写入 $file 档案" + +#: ../raid.pm_.c:146 +#, c-format +msgid "Not enough partitions for RAID level %d\n" +msgstr "没有足够的分割区给 %d 级的磁碟阵列\n" + +#: ../standalone/draksec_.c:28 +msgid "" +"This level is to be used with care. It makes your system more easy to use,\n" +"but very sensitive: it must not be used for a machine connected to others\n" +"or to the Internet. There is no password access." +msgstr "" + +#: ../standalone/draksec_.c:31 +msgid "" +"Password are now enabled, but use as a networked computer is still not " +"recommended." +msgstr "密码已经启动，但是仍不建议做为网路电脑" + +#: ../standalone/draksec_.c:32 +msgid "" +"Few improvements for this security level, the main one is that there are\n" +"more security warnings and checks." +msgstr "" + +#: ../standalone/draksec_.c:34 +msgid "" +"This is the standard security recommended for a computer that will be used\n" +"to connect to the Internet as a client. There are now security checks. " +msgstr "" + +#: ../standalone/draksec_.c:36 +msgid "" +"With this security level, the use of this system as a server becomes " +"possible.\n" +"The security is now high enough to use the system as a server which accept\n" +"connections from many clients. " +msgstr "" + +#: ../standalone/draksec_.c:39 +msgid "" +"We take level 4 features, but now the system is entirely closed.\n" +"Security features are at their maximum." +msgstr "" + +#: ../standalone/draksec_.c:49 +msgid "Setting security level" +msgstr "设定安全层级" + +#: ../standalone/drakxconf_.c:21 +msgid "Choose the tool you want to use" +msgstr "选择您想要的工具" + +#: ../standalone/drakxservices_.c:21 +msgid "Choose which services should be automatically started at boot time" +msgstr "选择那些服务要在开机时自动启动" + +#: ../standalone/mousedrake_.c:30 +msgid "no serial_usb found\n" +msgstr "找不到 serial_usb\n" + +#: ../standalone/mousedrake_.c:35 +msgid "Emulate third button?" +msgstr "模拟三键" + +#: ../standalone/rpmdrake_.c:25 +#, fuzzy +msgid "reading configuration" +msgstr "测试设定值" + +#: ../standalone/rpmdrake_.c:45 ../standalone/rpmdrake_.c:50 +#: ../standalone/rpmdrake_.c:253 +msgid "File" +msgstr "档案" + +#: ../standalone/rpmdrake_.c:48 ../standalone/rpmdrake_.c:229 +#: ../standalone/rpmdrake_.c:253 ../standalone/rpmdrake_.c:269 +msgid "Search" +msgstr "搜寻" + +#: ../standalone/rpmdrake_.c:49 ../standalone/rpmdrake_.c:56 +msgid "Package" +msgstr "套件" + +#: ../standalone/rpmdrake_.c:51 +#, fuzzy +msgid "Text" +msgstr "系统专家" + +#: ../standalone/rpmdrake_.c:53 +#, fuzzy +msgid "Tree" +msgstr "绿:" + +#: ../standalone/rpmdrake_.c:54 +msgid "Sort by" +msgstr "" + +#: ../standalone/rpmdrake_.c:55 +msgid "Category" +msgstr "" + +#: ../standalone/rpmdrake_.c:58 +#, fuzzy +msgid "See" +msgstr "伺服器" + +#: ../standalone/rpmdrake_.c:59 ../standalone/rpmdrake_.c:163 +#, fuzzy +msgid "Installed packages" +msgstr "安装套件" + +#: ../standalone/rpmdrake_.c:60 +#, fuzzy +msgid "Available packages" +msgstr "/全部套件" + +#: ../standalone/rpmdrake_.c:62 +#, fuzzy +msgid "Show only leaves" +msgstr "显示全部" + +#: ../standalone/rpmdrake_.c:67 +msgid "Expand all" +msgstr "" + +#: ../standalone/rpmdrake_.c:68 +#, fuzzy +msgid "Collapse all" +msgstr "全部清除" + +#: ../standalone/rpmdrake_.c:70 +#, fuzzy +msgid "Configuration" +msgstr "测试设定值" + +#: ../standalone/rpmdrake_.c:71 +#, fuzzy +msgid "Add location of packages" +msgstr "可替换套件" + +#: ../standalone/rpmdrake_.c:75 +#, fuzzy +msgid "Update location" +msgstr "升级选项" + +#: ../standalone/rpmdrake_.c:79 ../standalone/rpmdrake_.c:328 +#, fuzzy +msgid "Remove" +msgstr "移除选项" + +#: ../standalone/rpmdrake_.c:100 +msgid "Configuration: Add Location" +msgstr "" + +#: ../standalone/rpmdrake_.c:101 +#, fuzzy +msgid "Expand Tree" +msgstr "" +"展开\n" +"树" + +#: ../standalone/rpmdrake_.c:102 +#, fuzzy +msgid "Collapse Tree" +msgstr "" +"收缩\n" +"树" + +#: ../standalone/rpmdrake_.c:103 +#, fuzzy +msgid "Find Package" +msgstr "找到套件" + +#: ../standalone/rpmdrake_.c:104 +#, fuzzy +msgid "Find Package containing file" +msgstr "找到套件,其" + +#: ../standalone/rpmdrake_.c:105 +msgid "Toggle between Installed and Available" +msgstr "" + +#: ../standalone/rpmdrake_.c:139 +#, fuzzy +msgid "Files:\n" +msgstr "档案" + +#: ../standalone/rpmdrake_.c:161 ../standalone/rpmdrake_.c:209 +msgid "Uninstall" +msgstr "反安装" + +#: ../standalone/rpmdrake_.c:163 +#, fuzzy +msgid "Choose package to install" +msgstr "选取要安装的程式套件" + +#: ../standalone/rpmdrake_.c:190 +#, fuzzy +msgid "Checking dependencies" +msgstr "检查签名" + +#: ../standalone/rpmdrake_.c:190 ../standalone/rpmdrake_.c:409 +msgid "Wait" +msgstr "" + +#: ../standalone/rpmdrake_.c:209 +#, fuzzy +msgid "The following packages are going to be uninstalled" +msgstr "%d 套件无法移除" + +#: ../standalone/rpmdrake_.c:210 +#, fuzzy +msgid "Uninstalling the RPMs" +msgstr "安装程式" + +#: ../standalone/rpmdrake_.c:229 ../standalone/rpmdrake_.c:269 +msgid "Regexp" +msgstr "" + +#: ../standalone/rpmdrake_.c:229 +msgid "Which package are looking for" +msgstr "" + +#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262 +#: ../standalone/rpmdrake_.c:278 +#, fuzzy, c-format +msgid "%s not found" +msgstr " %d 有问题!" + +#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262 +#: ../standalone/rpmdrake_.c:278 +msgid "No match" +msgstr "" + +#: ../standalone/rpmdrake_.c:238 ../standalone/rpmdrake_.c:262 +#: ../standalone/rpmdrake_.c:278 +msgid "No more match" +msgstr "" + +#: ../standalone/rpmdrake_.c:246 +msgid "" +"rpmdrake is currently in ``low memory'' mode.\n" +"I'm going to relaunch rpmdrake to allow searching files" +msgstr "" + +#: ../standalone/rpmdrake_.c:253 +msgid "Which file are you looking for" +msgstr "" + +#: ../standalone/rpmdrake_.c:269 +msgid "What are looking for" +msgstr "" + +#: ../standalone/rpmdrake_.c:289 +msgid "Give a name (eg: `extra', `commercial')" +msgstr "" + +#: ../standalone/rpmdrake_.c:291 +#, fuzzy +msgid "Directory" +msgstr "RPM 目录" + +#: ../standalone/rpmdrake_.c:294 +msgid "No cdrom available (nothing in /mnt/cdrom)" +msgstr "" + +#: ../standalone/rpmdrake_.c:298 +msgid "URL of the directory containing the RPMs" +msgstr "" + +#: ../standalone/rpmdrake_.c:299 +msgid "" +"For FTP and HTTP, you need to give the location for hdlist\n" +"It must be relative to the URL above" +msgstr "" + +#: ../standalone/rpmdrake_.c:302 +msgid "Please submit the following information" +msgstr "" + +#: ../standalone/rpmdrake_.c:304 +#, fuzzy, c-format +msgid "%s is already in use" +msgstr "这个名称已经有使用了" + +#: ../standalone/rpmdrake_.c:315 ../standalone/rpmdrake_.c:321 +#: ../standalone/rpmdrake_.c:329 +msgid "Updating the RPMs base" +msgstr "" + +#: ../standalone/rpmdrake_.c:328 +#, fuzzy, c-format +msgid "Going to remove entry %s" +msgstr "移除选项" + +#: ../standalone/rpmdrake_.c:360 +msgid "Finding leaves" +msgstr "" + +#: ../standalone/rpmdrake_.c:360 +msgid "Finding leaves takes some time" +msgstr "" + +#, fuzzy +#~ msgid "Polish" +#~ msgstr "点阵" + +#~ msgid "Going to install %d MB. You can choose to install more programs" +#~ msgstr "将要安装 %d MB。你可以选择安装更多程式" |