summaryrefslogtreecommitdiffstats
path: root/perl-install/share/po/th.po
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/share/po/th.po')
-rw-r--r--perl-install/share/po/th.po26662
1 files changed, 14490 insertions, 12172 deletions
diff --git a/perl-install/share/po/th.po b/perl-install/share/po/th.po
index 86f715d78..ce86f3c6b 100644
--- a/perl-install/share/po/th.po
+++ b/perl-install/share/po/th.po
@@ -5,7 +5,7 @@
msgid ""
msgstr ""
"Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-12-03 03:09+0100\n"
+"POT-Creation-Date: 2004-02-19 18:02+0100\n"
"PO-Revision-Date: 2001-09-10 14:24GMT+7\n"
"Last-Translator: Wachara Chinsettawong <wachara@yahoo.com>\n"
"Language-Team: Thai <th@li.org>\n"
@@ -14,3556 +14,4303 @@ msgstr ""
"Content-Transfer-Encoding: 8bit\n"
"X-Generator: KBabel 0.9.5\n"
-#: ../../install_steps_interactive.pm:1
+#: ../move/move.pm:359
#, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Scanning partitions to find mount points"
+msgid ""
+"Your USB key doesn't have any valid Windows (FAT) partitions.\n"
+"We need one to continue (beside, it's more standard so that you\n"
+"will be able to move and access your files from machines\n"
+"running Windows). Please plug in an USB key containing a\n"
+"Windows partition instead.\n"
+"\n"
+"\n"
+"You may also proceed without an USB key - you'll still be\n"
+"able to use Mandrake Move as a normal live Mandrake\n"
+"Operating System."
+msgstr ""
-#: ../../security/help.pm:1
+#: ../move/move.pm:369
#, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid ""
+"We didn't detect any USB key on your system. If you\n"
+"plug in an USB key now, Mandrake Move will have the ability\n"
+"to transparently save the data in your home directory and\n"
+"system wide configuration, for next boot on this computer\n"
+"or another one. Note: if you plug in a key now, wait several\n"
+"seconds before detecting again.\n"
+"\n"
+"\n"
+"You may also proceed without an USB key - you'll still be\n"
+"able to use Mandrake Move as a normal live Mandrake\n"
+"Operating System."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../move/move.pm:380
#, c-format
-msgid ""
-"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
-"0/1 for Local Config...\n"
+msgid "Need a key to save your data"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../move/move.pm:382
#, c-format
-msgid "Configuration changed - restart clusternfs/dhcpd?"
+msgid "Detect USB key again"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../move/move.pm:383 ../move/move.pm:413
#, c-format
-msgid "\t\tErase=%s"
+msgid "Continue without USB key"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: ../move/move.pm:394 ../move/move.pm:408
#, c-format
-msgid ""
-"Differential backups only save files that have changed or are new since the "
-"original 'base' backup."
+msgid "Key isn't writable"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "network printer port"
-msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
+#: ../move/move.pm:396
+#, c-format
+msgid ""
+"The USB key seems to have write protection enabled, but we can't safely\n"
+"unplug it now.\n"
+"\n"
+"\n"
+"Click the button to reboot the machine, unplug it, remove write protection,\n"
+"plug the key again, and launch Mandrake Move again."
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: ../move/move.pm:402 help.pm:418 install_steps_interactive.pm:1310
#, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+msgid "Reboot"
+msgstr "Root"
-#: ../../standalone/drakTermServ:1
+#: ../move/move.pm:410
#, c-format
-msgid "DrakTermServ"
+msgid ""
+"The USB key seems to have write protection enabled. Please\n"
+"unplug it, remove write protection, and then plug it again."
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+#: ../move/move.pm:412
+#, fuzzy, c-format
+msgid "Retry"
+msgstr "เรียกคืนจากไฟล์"
-#: ../../diskdrake/interactive.pm:1
+#: ../move/move.pm:423
#, c-format
-msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+msgid "Setting up USB key"
msgstr ""
-"พาร์ติชั่นแบ็คอัพไม่มีขนาดเท่ากัน\n"
-"ต้องการทำต่อหรือไม่?"
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../move/move.pm:423
#, fuzzy, c-format
-msgid "Which username"
-msgstr "ชื่อผู้ใช้"
+msgid "Please wait, setting up system configuration files on USB key..."
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-#: ../../any.pm:1
+#: ../move/move.pm:445
#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"
+msgid "Enter your user information, password will be used for screensaver"
+msgstr ""
-#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#: ../move/move.pm:455
#, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "กู้ตารางพาร์ติชั่น"
+msgid "Auto configuration"
+msgstr "การคอนฟิก"
-#: ../../standalone/drakconnect:1
+#: ../move/move.pm:455
#, fuzzy, c-format
-msgid "Configure hostname..."
-msgstr "คอนฟิกเม้าส์"
+msgid "Please wait, detecting and configuring devices..."
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
+#: ../move/move.pm:502 ../move/move.pm:559 ../move/move.pm:563
+#: ../move/tree/mdk_totem:86 diskdrake/dav.pm:77 diskdrake/hd_gtk.pm:117
+#: diskdrake/interactive.pm:215 diskdrake/interactive.pm:228
+#: diskdrake/interactive.pm:369 diskdrake/interactive.pm:384
+#: diskdrake/interactive.pm:505 diskdrake/interactive.pm:510
+#: diskdrake/smbnfs_gtk.pm:42 fsedit.pm:253 install_steps.pm:82
+#: install_steps_interactive.pm:40 interactive/http.pm:118
+#: interactive/http.pm:119 network/netconnect.pm:753 network/netconnect.pm:846
+#: network/netconnect.pm:849 network/netconnect.pm:894
+#: network/netconnect.pm:898 network/netconnect.pm:965
+#: network/netconnect.pm:1014 network/netconnect.pm:1019
+#: network/netconnect.pm:1034 printer/printerdrake.pm:213
+#: printer/printerdrake.pm:220 printer/printerdrake.pm:245
+#: printer/printerdrake.pm:393 printer/printerdrake.pm:398
+#: printer/printerdrake.pm:411 printer/printerdrake.pm:421
+#: printer/printerdrake.pm:1052 printer/printerdrake.pm:1099
+#: printer/printerdrake.pm:1174 printer/printerdrake.pm:1178
+#: printer/printerdrake.pm:1349 printer/printerdrake.pm:1353
+#: printer/printerdrake.pm:1357 printer/printerdrake.pm:1457
+#: printer/printerdrake.pm:1461 printer/printerdrake.pm:1578
+#: printer/printerdrake.pm:1582 printer/printerdrake.pm:1668
+#: printer/printerdrake.pm:1755 printer/printerdrake.pm:2153
+#: printer/printerdrake.pm:2419 printer/printerdrake.pm:2425
+#: printer/printerdrake.pm:2842 printer/printerdrake.pm:2846
+#: printer/printerdrake.pm:2850 printer/printerdrake.pm:3241
+#: standalone/drakTermServ:399 standalone/drakTermServ:730
+#: standalone/drakTermServ:737 standalone/drakTermServ:931
+#: standalone/drakTermServ:1330 standalone/drakTermServ:1335
+#: standalone/drakTermServ:1342 standalone/drakTermServ:1353
+#: standalone/drakTermServ:1372 standalone/drakauth:36
+#: standalone/drakbackup:766 standalone/drakbackup:881
+#: standalone/drakbackup:1455 standalone/drakbackup:1488
+#: standalone/drakbackup:2004 standalone/drakbackup:2177
+#: standalone/drakbackup:2738 standalone/drakbackup:2805
+#: standalone/drakbackup:4826 standalone/drakboot:235 standalone/drakbug:267
+#: standalone/drakbug:286 standalone/drakbug:292 standalone/drakconnect:569
+#: standalone/drakconnect:571 standalone/drakconnect:587
+#: standalone/drakfloppy:301 standalone/drakfloppy:305
+#: standalone/drakfloppy:311 standalone/drakfont:208 standalone/drakfont:221
+#: standalone/drakfont:257 standalone/drakfont:597 standalone/draksplash:21
+#: standalone/logdrake:171 standalone/logdrake:415 standalone/logdrake:420
+#: standalone/scannerdrake:52 standalone/scannerdrake:194
+#: standalone/scannerdrake:253 standalone/scannerdrake:676
+#: standalone/scannerdrake:687 standalone/scannerdrake:826
+#: standalone/scannerdrake:837 standalone/scannerdrake:902 wizards.pm:95
+#: wizards.pm:99 wizards.pm:121
+#, c-format
+msgid "Error"
+msgstr "ผิดพลาด"
-#: ../../install_steps_interactive.pm:1
+#: ../move/move.pm:503 install_steps.pm:83
#, c-format
-msgid "Post-install configuration"
-msgstr "การคอนฟิกหลังการติดตั้ง"
+msgid ""
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
+msgstr ""
+"มีความผิดพลาดเกิดขึ้น แต่โปรแกรมไม่สามารถแก้ไขได้\n"
+"หากทำงานต่ออาจเกิดความเสียหายได้"
-#: ../../standalone/drakperm:1
+#: ../move/move.pm:559 install_steps_interactive.pm:40
+#, c-format
+msgid "An error occurred"
+msgstr "มีปัญหาเกิดขึ้น"
+
+#: ../move/move.pm:565
#, c-format
msgid ""
-"The current security level is %s\n"
-"Select permissions to see/edit"
+"An error occurred:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"This may come from corrupted system configuration files\n"
+"on the USB key, in this case removing them and then\n"
+"rebooting Mandrake Move would fix the problem. To do\n"
+"so, click on the corresponding button.\n"
+"\n"
+"\n"
+"You may also want to reboot and remove the USB key, or\n"
+"examine its contents under another OS, or even have\n"
+"a look at log files in console #3 and #4 to try to\n"
+"guess what's happening."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../move/move.pm:580
+#, fuzzy, c-format
+msgid "Remove system config files"
+msgstr "ฟอร์แมต loopback file %s"
+
+#: ../move/move.pm:581
#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ใช้ ``%s'' แทน"
+msgid "Simply reboot"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
+#: ../move/tree/mdk_totem:60
#, c-format
-msgid "Type"
-msgstr "ประเภท"
+msgid "You can only run with no CDROM support"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: ../move/tree/mdk_totem:81
#, c-format
-msgid ""
-"\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+msgid "Kill those programs"
msgstr ""
-#: ../../lang.pm:1
+#: ../move/tree/mdk_totem:82
#, c-format
-msgid "Sri Lanka"
+msgid "No CDROM support"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../move/tree/mdk_totem:87
+#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+"You can't use another CDROM when the following programs are running: \n"
+"%s"
+msgstr ""
-#: ../../lang.pm:1
+#: ../move/tree/mdk_totem:101
#, c-format
-msgid "Central African Republic"
+msgid "Copying to memory to allow removing the CDROM"
msgstr ""
-#: ../../network/network.pm:1
+#: Xconfig/card.pm:16
#, c-format
-msgid "Gateway device"
-msgstr "อุปกรณ์เกตเวย์"
+msgid "256 kB"
+msgstr "256 kB"
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
-msgid "Advanced preferences"
-msgstr "การปรับแต่ง LAN"
+#: Xconfig/card.pm:17
+#, c-format
+msgid "512 kB"
+msgstr "512 kB"
-#: ../../standalone/drakbackup:1
+#: Xconfig/card.pm:18
#, c-format
-msgid "Net Method:"
-msgstr ""
+msgid "1 MB"
+msgstr "1 MB"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet Card"
+#: Xconfig/card.pm:19
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
-#: ../../security/l10n.pm:1
+#: Xconfig/card.pm:20
#, c-format
-msgid "If set, send the mail report to this email address else send it to root"
-msgstr ""
+msgid "4 MB"
+msgstr "4 MB"
-#: ../../modules/interactive.pm:1 ../../standalone/drakconnect:1
+#: Xconfig/card.pm:21
#, c-format
-msgid "Parameters"
-msgstr "Parameters"
+msgid "8 MB"
+msgstr "8 MB"
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "no"
-msgstr "ข้อมูล"
+#: Xconfig/card.pm:22
+#, c-format
+msgid "16 MB"
+msgstr "16 MB"
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "ใช้ auto detection"
+#: Xconfig/card.pm:23
+#, c-format
+msgid "32 MB"
+msgstr "32 MB"
-#: ../../standalone/drakconnect:1
+#: Xconfig/card.pm:24
#, c-format
-msgid "Interface:"
-msgstr "Interface:"
+msgid "64 MB or more"
+msgstr "64 MB หรือมากกว่า"
-#: ../../steps.pm:1
+#: Xconfig/card.pm:211
#, c-format
-msgid "Select installation class"
-msgstr "เลือกชุดการติดตั้ง"
+msgid "X server"
+msgstr "X เซิร์ฟเวอร์"
-#: ../../network/tools.pm:1
+#: Xconfig/card.pm:212
#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
-msgstr ""
-"ไม่สามารถต่อเข้า Internet \n"
-"ลองทำการคอนฟิกใหม่อีกครั้ง"
+msgid "Choose an X server"
+msgstr "เลือก X เซิร์ฟเวอร์"
-#: ../../printer/printerdrake.pm:1
+#: Xconfig/card.pm:244
#, c-format
+msgid "Multi-head configuration"
+msgstr "Multi-head configuration"
+
+#: Xconfig/card.pm:245
+#, fuzzy, c-format
msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
msgstr ""
+"เครื่องของคุณสนับสนุนการคอนฟิกแบบ multihead \n"
+"คุณต้องการทำอะไร?"
-#: ../../lang.pm:1
+#: Xconfig/card.pm:312
#, fuzzy, c-format
-msgid "Belarus"
-msgstr "Belarusian"
+msgid "Can't install XFree package: %s"
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-#: ../../partition_table.pm:1
+#: Xconfig/card.pm:322
#, c-format
-msgid "Error writing to file %s"
-msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
+msgid "Select the memory size of your graphics card"
+msgstr "เลือกขนาดหน่วยความจำของกราฟฟิคการ์ด"
-#: ../../security/l10n.pm:1
+#: Xconfig/card.pm:398
#, c-format
-msgid "Report check result to syslog"
-msgstr ""
+msgid "XFree configuration"
+msgstr "การคอนฟิก XFree"
-#: ../../services.pm:1
+#: Xconfig/card.pm:400
#, c-format
-msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
-msgstr ""
-"apmd คือโปรแกรมดูแลสถานะของ battery \n"
-"มันสามารถจะปิดเครื่องเมื่อเวลา battery มีไฟน้อย"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Which configuration of XFree do you want to have?"
+msgstr "XFree ชนิดใหนที่คุณต้องการมี"
-#: ../../install_steps_gtk.pm:1
+#: Xconfig/card.pm:434
#, c-format
-msgid "The following packages are going to be installed"
-msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
+msgid "Configure all heads independently"
+msgstr "Configure all heads independently"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "การปรับแต่ง LAN"
+#: Xconfig/card.pm:435
+#, c-format
+msgid "Use Xinerama extension"
+msgstr "Use Xinerama extension"
-#: ../../standalone/drakbackup:1
+#: Xconfig/card.pm:440
#, fuzzy, c-format
-msgid "Total progress"
-msgstr "กำลังตรวจสอบพอร์ต"
+msgid "Configure only card \"%s\"%s"
+msgstr "คอนฟิกเฉพาะการ์ด \"%s\" (%s)"
-#: ../../install_interactive.pm:1
+#: Xconfig/card.pm:454 Xconfig/card.pm:456 Xconfig/various.pm:23
#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
+msgid "XFree %s"
+msgstr "XFree %s"
-#: ../../diskdrake/interactive.pm:1
+#: Xconfig/card.pm:467 Xconfig/card.pm:493 Xconfig/various.pm:23
#, c-format
-msgid "Moving"
-msgstr "ย้าย"
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s with 3D hardware acceleration"
-#: ../../standalone/drakbackup:1
+#: Xconfig/card.pm:470
#, c-format
msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "yes"
-msgstr "ใช่"
+#: Xconfig/card.pm:472 Xconfig/card.pm:495
+#, c-format
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Your card can have 3D hardware acceleration support with XFree %s."
-#: ../../printer/printerdrake.pm:1
+#: Xconfig/card.pm:480 Xconfig/card.pm:501
#, c-format
-msgid "("
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-#: ../../network/netconnect.pm:1
+#: Xconfig/card.pm:483
#, c-format
msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
msgstr ""
-"ยินดีต้อนรับสู่ Network Configuration Wizard\n"
-"\n"
-"เรากำลังจะปรับแต่ง internet/network \n"
-"ถ้าคุณไม่ต้องการ auto detection กรุณายกเลิก checkbox.\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: Xconfig/card.pm:486 Xconfig/card.pm:503
#, c-format
-msgid ")"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
msgstr ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-#: ../../lang.pm:1
+#: Xconfig/card.pm:509
#, c-format
-msgid "Lebanon"
+msgid "Xpmac (installation display driver)"
msgstr ""
-#: ../../mouse.pm:1
+#: Xconfig/main.pm:88 Xconfig/main.pm:89 Xconfig/monitor.pm:106 any.pm:818
#, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Custom"
+msgstr "แบบปรับแก้ได้ (Customized) "
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Stop"
-msgstr "เซ็กเตอร์"
+#: Xconfig/main.pm:113 diskdrake/dav.pm:28 help.pm:14
+#: install_steps_interactive.pm:83 printer/printerdrake.pm:3871
+#: standalone/draksplash:114 standalone/harddrake2:187 standalone/logdrake:176
+#: standalone/scannerdrake:438
+#, c-format
+msgid "Quit"
+msgstr "ออก"
-#: ../../standalone/scannerdrake:1
+#: Xconfig/main.pm:115
#, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "ค้นพบ %s"
+msgid "Graphic Card"
+msgstr "กราฟฟิคการ์ด"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "เลือกไฟล์"
+#: Xconfig/main.pm:118 Xconfig/monitor.pm:100
+#, c-format
+msgid "Monitor"
+msgstr "จอภาพ"
-#: ../../network/shorewall.pm:1
+#: Xconfig/main.pm:121 Xconfig/resolution_and_depth.pm:228
#, c-format
-msgid ""
-"Please enter the name of the interface connected to the "
-"internet. \n"
-" \n"
-"Examples:\n"
-" ppp+ for modem or DSL connections, \n"
-" eth0, or eth1 for cable connection, \n"
-" ippp+ for a isdn connection.\n"
+msgid "Resolution"
+msgstr "ขนาดจอภาพ"
+
+#: Xconfig/main.pm:126
+#, c-format
+msgid "Test"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: Xconfig/main.pm:131 diskdrake/dav.pm:67 diskdrake/interactive.pm:410
+#: diskdrake/removable.pm:25 diskdrake/smbnfs_gtk.pm:80
+#: standalone/drakconnect:254 standalone/drakconnect:263
+#: standalone/drakconnect:277 standalone/drakconnect:283
+#: standalone/drakconnect:381 standalone/drakconnect:382
+#: standalone/drakconnect:540 standalone/drakfont:491 standalone/drakfont:551
+#: standalone/harddrake2:184
#, fuzzy, c-format
-msgid "\tUse .backupignore files\n"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Options"
+msgstr "/Options/ทดลอง"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "อาร์เมเนียน (โฟเนติค)"
+#: Xconfig/main.pm:180
+#, c-format
+msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
+"\n"
+"%s"
+msgstr ""
+"เก็บการเปลี่ยนแปลง\n"
+"การปรับแต่งปัจจุบัณคือ:\n"
+"\n"
+"%s"
-#: ../../standalone/drakpxe:1
+#: Xconfig/monitor.pm:101
#, c-format
-msgid "The DHCP start ip"
+msgid "Choose a monitor"
+msgstr "เลือกจอภาพ"
+
+#: Xconfig/monitor.pm:107
+#, c-format
+msgid "Plug'n Play"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: Xconfig/monitor.pm:108 mouse.pm:49
#, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Generic"
+msgstr "Generic"
-#: ../../standalone/drakbackup:1
+#: Xconfig/monitor.pm:109 standalone/drakconnect:520 standalone/harddrake2:68
+#: standalone/harddrake2:69
#, fuzzy, c-format
-msgid "Don't rewind tape after backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Vendor"
+msgstr "ยกเลิก"
-#: ../../any.pm:1
+#: Xconfig/monitor.pm:119
#, c-format
-msgid "Bootloader main options"
-msgstr "อ๊อปชั่นหลักของ Bootloader"
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
-#: ../../standalone.pm:1
+#: Xconfig/monitor.pm:124
#, c-format
msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
msgstr ""
+"ขั้นตอนต่อไปนี้จะต้องใส่พารามิเตอร์ที่มีความสำคัญสองตัว ได้แก่อัตราความถี่\n"
+"ของการสแกนภาพตามแนวตั้ง (vertical refresh rate) ซึ่งเป็นความถี่ที่มีการ\n"
+"รีเฟรชจอภาพทั้งจอ และการอัตราสแกนภาพตามแนวนอน ซึ่งเป็นอัตราของการวาดของ\n"
+"เส้นกวาดสิ่งที่สำคัญมากก็คือ คุณจะต้องระบุชนิดของหน้าจอซึ่งอัตราความถี่ที่\n"
+"ไม่เกินความสามารถของจอภาพ ไม่เช่นนั้นอาจเกิดความเสียหายกับจอภาพได้\n"
+"หากไม่แน่ใจโปรดเลือกเซ็ตอัพแบบมาตรฐาน"
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Tape"
-msgstr "ประเภท"
+#: Xconfig/monitor.pm:131
+#, c-format
+msgid "Horizontal refresh rate"
+msgstr "อัตราการรีเฟรชตามแนวนอน"
-#: ../../lang.pm:1
+#: Xconfig/monitor.pm:132
#, c-format
-msgid "Malaysia"
-msgstr ""
+msgid "Vertical refresh rate"
+msgstr "อัตราการรีเฟรชตามแนวตั้ง"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "ทดสอบ connection..."
+#: Xconfig/resolution_and_depth.pm:12
+#, c-format
+msgid "256 colors (8 bits)"
+msgstr "256 สี (8 บิต)"
-#: ../../standalone/drakbackup:1
+#: Xconfig/resolution_and_depth.pm:13
#, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
-msgstr ""
+msgid "32 thousand colors (15 bits)"
+msgstr "สามหมื่นสองพันสี (15 บิต)"
-#: ../../standalone/drakedm:1
-#, fuzzy, c-format
-msgid "The change is done, do you want to restart the dm service ?"
-msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
+#: Xconfig/resolution_and_depth.pm:14
+#, c-format
+msgid "65 thousand colors (16 bits)"
+msgstr "หกหมื่นห้าพันสี (16 บิต)"
-#: ../../keyboard.pm:1
+#: Xconfig/resolution_and_depth.pm:15
#, c-format
-msgid "Swiss (French layout)"
-msgstr "สวิส (เลย์เอ้าท์ตามฝรั่งเศษ)"
+msgid "16 million colors (24 bits)"
+msgstr "สิบหกล้านสี (24 บิต)"
-#: ../../raid.pm:1
+#: Xconfig/resolution_and_depth.pm:16
#, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid failed (maybe raidtools are missing?)"
+msgid "4 billion colors (32 bits)"
+msgstr "สี่พันล้านสี (32 บิต)"
-#: ../../standalone/drakbackup:1
+#: Xconfig/resolution_and_depth.pm:141
#, c-format
-msgid "August"
-msgstr "สิงหาคม"
+msgid "Resolutions"
+msgstr "ความละเอียด"
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "FTP server"
-msgstr "เซิร์ฟเวอร์ NIS"
+#: Xconfig/resolution_and_depth.pm:275
+#, c-format
+msgid "Choose the resolution and the color depth"
+msgstr "เลือกขนาดจอภาพและความละเอียดสี"
-#: ../../harddrake/data.pm:1
+#: Xconfig/resolution_and_depth.pm:276
#, c-format
-msgid "Webcam"
-msgstr ""
+msgid "Graphics card: %s"
+msgstr "กราฟฟิคการ์ด: %s"
-#: ../../standalone/harddrake2:1
+#: Xconfig/resolution_and_depth.pm:289 interactive.pm:403
+#: interactive/gtk.pm:734 interactive/http.pm:103 interactive/http.pm:157
+#: interactive/newt.pm:308 interactive/newt.pm:410 interactive/stdio.pm:39
+#: interactive/stdio.pm:142 interactive/stdio.pm:143 interactive/stdio.pm:172
+#: standalone/drakbackup:4320 standalone/drakbackup:4352
+#: standalone/drakbackup:4445 standalone/drakbackup:4462
+#: standalone/drakbackup:4563 standalone/drakconnect:162
+#: standalone/drakconnect:734 standalone/drakconnect:821
+#: standalone/drakconnect:964 standalone/net_monitor:303 ugtk2.pm:412
+#: ugtk2.pm:509 ugtk2.pm:1047 ugtk2.pm:1070
#, c-format
-msgid "size of the (second level) cpu cache"
-msgstr ""
+msgid "Ok"
+msgstr "ตกลง"
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Sound card"
+#: Xconfig/resolution_and_depth.pm:289 any.pm:858 diskdrake/smbnfs_gtk.pm:81
+#: help.pm:197 help.pm:457 install_steps_gtk.pm:488
+#: install_steps_interactive.pm:787 interactive.pm:404 interactive/gtk.pm:738
+#: interactive/http.pm:104 interactive/http.pm:161 interactive/newt.pm:307
+#: interactive/newt.pm:414 interactive/stdio.pm:39 interactive/stdio.pm:142
+#: interactive/stdio.pm:176 printer/printerdrake.pm:2920
+#: standalone/drakautoinst:200 standalone/drakbackup:4284
+#: standalone/drakbackup:4311 standalone/drakbackup:4336
+#: standalone/drakbackup:4369 standalone/drakbackup:4395
+#: standalone/drakbackup:4421 standalone/drakbackup:4478
+#: standalone/drakbackup:4504 standalone/drakbackup:4534
+#: standalone/drakbackup:4558 standalone/drakconnect:161
+#: standalone/drakconnect:819 standalone/drakconnect:973
+#: standalone/drakfont:657 standalone/drakfont:734 standalone/logdrake:176
+#: standalone/net_monitor:299 ugtk2.pm:406 ugtk2.pm:507 ugtk2.pm:516
+#: ugtk2.pm:1047
+#, c-format
+msgid "Cancel"
+msgstr "ยกเลิก"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Month"
-msgstr "เม้าท์"
+#: Xconfig/resolution_and_depth.pm:289 diskdrake/hd_gtk.pm:154
+#: install_steps_gtk.pm:267 install_steps_gtk.pm:667 interactive.pm:498
+#: interactive/gtk.pm:620 interactive/gtk.pm:622 standalone/drakTermServ:313
+#: standalone/drakbackup:4281 standalone/drakbackup:4308
+#: standalone/drakbackup:4333 standalone/drakbackup:4366
+#: standalone/drakbackup:4392 standalone/drakbackup:4418
+#: standalone/drakbackup:4459 standalone/drakbackup:4475
+#: standalone/drakbackup:4501 standalone/drakbackup:4530
+#: standalone/drakbackup:4555 standalone/drakbackup:4580
+#: standalone/drakbug:157 standalone/drakconnect:157
+#: standalone/drakconnect:227 standalone/drakfont:509 standalone/drakperm:134
+#: standalone/draksec:285 standalone/harddrake2:183 ugtk2.pm:1160
+#: ugtk2.pm:1161
+#, c-format
+msgid "Help"
+msgstr "ความช่วยเหลือ"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Search for files to restore"
-msgstr "คุณมีเม้าส์ชนิดใด"
+#: Xconfig/test.pm:30
+#, c-format
+msgid "Test of the configuration"
+msgstr "ทดสอบการคอนฟิก"
-#: ../../lang.pm:1
+#: Xconfig/test.pm:31
#, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Do you want to test the configuration?"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+
+#: Xconfig/test.pm:31
+#, fuzzy, c-format
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "ระวัง การทดสอบการ์ดแสดงผลอาจทำให้คอมพิวเตอร์หยุดการทำงาน"
-#: ../../printer/printerdrake.pm:1
+#: Xconfig/test.pm:71
#, c-format
msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Level %s\n"
-msgstr "ระดับ %s\n"
-
-#: ../../keyboard.pm:1
+#: Xconfig/test.pm:149
#, fuzzy, c-format
-msgid "Syriac (phonetic)"
-msgstr "อาร์เมเนียน (โฟเนติค)"
+msgid "Leaving in %d seconds"
+msgstr "%d วินาที"
-#: ../../lang.pm:1
+#: Xconfig/test.pm:149
#, fuzzy, c-format
-msgid "Iran"
-msgstr "Iranian"
+msgid "Is this the correct setting?"
+msgstr "ถูกต้องหรือไม่?"
-#: ../../standalone/harddrake2:1
+#: Xconfig/various.pm:29
#, c-format
-msgid "Bus"
-msgstr ""
+msgid "Keyboard layout: %s\n"
+msgstr "เลือกชนิดของคีย์บอร์ด: %s\n"
-#: ../../lang.pm:1
+#: Xconfig/various.pm:30
#, c-format
-msgid "Iraq"
-msgstr ""
+msgid "Mouse type: %s\n"
+msgstr "เลือกชนิดของเม้าส์: %s\n"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "connecting to %s ..."
-msgstr "อ่าน CUPS drivers database..."
+#: Xconfig/various.pm:31
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "ดีไวซ์ของเม้าส์: %s\n"
-#: ../../standalone/drakgw:1
+#: Xconfig/various.pm:32
#, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "มีความขัดแย้งของ LAN address ซึ่งเจอในคอนฟิกปัจจุบันใน %s!\n"
+msgid "Monitor: %s\n"
+msgstr "จอภาพ: %s\n"
-#: ../../standalone/drakgw:1
+#: Xconfig/various.pm:33
#, c-format
-msgid "Configuring..."
-msgstr "กำลังทำการคอนฟิก"
+msgid "Monitor HorizSync: %s\n"
+msgstr "อัตราความถี่กวาดตามแนวนอน: %s\n"
-#: ../../harddrake/v4l.pm:1
+#: Xconfig/various.pm:34
#, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
-msgstr ""
+msgid "Monitor VertRefresh: %s\n"
+msgstr "อัตราความถี่กวาดตามแนวตั้ง: %s\n"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: Xconfig/various.pm:35
#, c-format
-msgid "Password (again)"
-msgstr "รหัสผ่าน (ใส่อีกครั้ง)"
+msgid "Graphics card: %s\n"
+msgstr "กราฟฟิคการ์ด: %s\n"
-#: ../../standalone/drakfont:1
+#: Xconfig/various.pm:36
#, c-format
-msgid "Search installed fonts"
-msgstr ""
+msgid "Graphics memory: %s kB\n"
+msgstr "ขนาดหน่วยความจำของกราฟฟิคการ์ด: %s kB\n"
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Default desktop"
-msgstr "Default"
+#: Xconfig/various.pm:38
+#, c-format
+msgid "Color depth: %s\n"
+msgstr "อความละเอียดสี: %s\n"
-#: ../../standalone/drakbug:1
+#: Xconfig/various.pm:39
#, c-format
-msgid ""
-"To submit a bug report, click on the button report.\n"
-"This will open a web browser window on %s\n"
-" where you'll find a form to fill in. The information displayed above will "
-"be \n"
-"transferred to that server."
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "ความละเอียดของภาพ %s\n"
-#: ../../lang.pm:1
+#: Xconfig/various.pm:41
#, c-format
-msgid "Venezuela"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "เซิร์ฟเวอร์ XFree86: %s\n"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: Xconfig/various.pm:42
#, c-format
-msgid "IP address"
-msgstr "ค่า IP"
+msgid "XFree86 driver: %s\n"
+msgstr "ไดร์เวอร์ XFree86: %s\n"
-#: ../../install_interactive.pm:1
+#: Xconfig/various.pm:71
#, c-format
-msgid "Choose the sizes"
-msgstr "เลือกขนาด"
+msgid "Graphical interface at startup"
+msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
-#: ../../standalone/drakbackup:1
+#: Xconfig/various.pm:73
#, c-format
msgid ""
-"List of data corrupted:\n"
-"\n"
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
msgstr ""
+"โปรแกรมจะกำหนดให้คอมพิวเตอร์ของคุณใช้งานแบบกราฟฟิคเมื่อเริ่มบูต\n"
+"คุณต้องการจะให้ทำงานแบบกราฟฟิคเมื่อรีบูตหรือไม่?"
-#: ../../fs.pm:1
+#: Xconfig/various.pm:86
#, c-format
msgid ""
-"Can only be mounted explicitly (i.e.,\n"
-"the -a option will not cause the file system to be mounted)."
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
msgstr ""
-#: ../../network/modem.pm:1
+#: Xconfig/various.pm:98
+#, fuzzy, c-format
+msgid "What norm is your TV using?"
+msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
+
+#: any.pm:98 harddrake/sound.pm:150 interactive.pm:441 standalone/drakbug:259
+#: standalone/drakconnect:164 standalone/drakxtv:90 standalone/harddrake2:133
+#: standalone/service_harddrake:94
+#, c-format
+msgid "Please wait"
+msgstr "โปรดรอสักครู่"
+
+#: any.pm:98
+#, fuzzy, c-format
+msgid "Bootloader installation in progress"
+msgstr "การติดตั้ง Bootloader"
+
+#: any.pm:137
#, c-format
msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "สร้างพาร์ติชั่นใหม่"
+#: any.pm:160 any.pm:192 help.pm:800
+#, c-format
+msgid "First sector of drive (MBR)"
+msgstr "เซ็กเตอร์แรกของไดรว์ (MBR)"
-#: ../../standalone/drakperm:1
+#: any.pm:161
#, fuzzy, c-format
-msgid "Current user"
-msgstr "ยอมรับผู้ใช้"
+msgid "First sector of the root partition"
+msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: any.pm:163
#, fuzzy, c-format
-msgid "Username"
-msgstr "ชื่อผู้ใช้"
+msgid "On Floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
-#: ../../keyboard.pm:1
+#: any.pm:165 help.pm:768 help.pm:800 printer/printerdrake.pm:3238
#, c-format
-msgid "Left \"Windows\" key"
-msgstr ""
+msgid "Skip"
+msgstr "ข้ามไป"
-#: ../../lang.pm:1
+#: any.pm:170
#, c-format
-msgid "Guyana"
-msgstr ""
+msgid "SILO Installation"
+msgstr "การติดตั้ง SILO"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "การปรับแต่ง LAN"
+#: any.pm:170
+#, c-format
+msgid "LILO/grub Installation"
+msgstr "การติดตั้ง LILO/grub"
+
+#: any.pm:171
+#, c-format
+msgid "Where do you want to install the bootloader?"
+msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
-#: ../../standalone/drakperm:1
+#: any.pm:192
+#, c-format
+msgid "First sector of boot partition"
+msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
+
+#: any.pm:204 any.pm:239
+#, c-format
+msgid "Bootloader main options"
+msgstr "อ๊อปชั่นหลักของ Bootloader"
+
+#: any.pm:205
+#, c-format
+msgid "Boot Style Configuration"
+msgstr "Boot Style Configuration"
+
+#: any.pm:209
+#, c-format
+msgid "Give the ram size in MB"
+msgstr "ให้ป้อนข้อมูลของขนาดหน่วยความจำเป็น Mb"
+
+#: any.pm:211
#, c-format
msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
-msgstr ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "อ็อปชั่น ``อ๊อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์'' จะต้องใส่รหัสผ่านด้วย"
-#: ../../printer/main.pm:1
+#: any.pm:212 any.pm:519 install_steps_interactive.pm:1158
#, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
+msgid "The passwords do not match"
+msgstr "รหัสผ่านไม่เหมือนกัน"
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Printer Name"
-msgstr "ชื่อพรินต์คิว"
+#: any.pm:212 any.pm:519 diskdrake/interactive.pm:1255
+#: install_steps_interactive.pm:1158
+#, c-format
+msgid "Please try again"
+msgstr "โปรดลองอีกครั้ง"
-#: ../../../move/move.pm:1
+#: any.pm:217 any.pm:242 help.pm:768
#, c-format
-msgid "Setting up USB key"
-msgstr ""
+msgid "Bootloader to use"
+msgstr "Bootloader ที่จะใช้"
-#: ../../standalone/drakfloppy:1
+#: any.pm:219
#, c-format
-msgid "Remove a module"
-msgstr "ลบทิ้ง 1 module"
+msgid "Bootloader installation"
+msgstr "การติดตั้ง Bootloader"
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
+#: any.pm:221 any.pm:244 help.pm:768
#, c-format
-msgid "Password"
-msgstr "รหัสผ่าน"
+msgid "Boot device"
+msgstr "อุปกรณ์บูต"
-#: ../../standalone/drakbackup:1
+#: any.pm:223
+#, c-format
+msgid "Delay before booting default image"
+msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"
+
+#: any.pm:224 help.pm:768
#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "Enable ACPI"
+msgstr "Enable CD Boot?"
-#: ../../printer/printerdrake.pm:1
+#: any.pm:225
#, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "Force No APIC"
msgstr ""
-#: ../../any.pm:1
+#: any.pm:227 any.pm:546 diskdrake/smbnfs_gtk.pm:180
+#: install_steps_interactive.pm:1163 network/netconnect.pm:491
+#: printer/printerdrake.pm:1340 printer/printerdrake.pm:1454
+#: standalone/drakbackup:1990 standalone/drakbackup:3875
+#: standalone/drakconnect:916 standalone/drakconnect:944
+#, c-format
+msgid "Password"
+msgstr "รหัสผ่าน"
+
+#: any.pm:228 any.pm:547 install_steps_interactive.pm:1164
+#, c-format
+msgid "Password (again)"
+msgstr "รหัสผ่าน (ใส่อีกครั้ง)"
+
+#: any.pm:229
+#, c-format
+msgid "Restrict command line options"
+msgstr "อ็อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์"
+
+#: any.pm:229
+#, c-format
+msgid "restrict"
+msgstr "จำเพาะ"
+
+#: any.pm:231
+#, c-format
+msgid "Clean /tmp at each boot"
+msgstr "ลบ /tmp ตอน boot ทุกครั้ง"
+
+#: any.pm:232
+#, c-format
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "กำหนดค่าหน่วยความจำ (RAM) ให้ถูกต้องถ้าต้องการ (ระบบพบ %d MB)"
+
+#: any.pm:234
+#, c-format
+msgid "Enable multiple profiles"
+msgstr "Enable multiple profiles"
+
+#: any.pm:243
+#, c-format
+msgid "Init Message"
+msgstr "ข้อความ init"
+
+#: any.pm:245
+#, c-format
+msgid "Open Firmware Delay"
+msgstr "Open Firmware Delay"
+
+#: any.pm:246
+#, c-format
+msgid "Kernel Boot Timeout"
+msgstr "Kernel Boot Timeout"
+
+#: any.pm:247
+#, c-format
+msgid "Enable CD Boot?"
+msgstr "Enable CD Boot?"
+
+#: any.pm:248
+#, c-format
+msgid "Enable OF Boot?"
+msgstr "Enable OF Boot?"
+
+#: any.pm:249
+#, c-format
+msgid "Default OS?"
+msgstr "Default OS?"
+
+#: any.pm:290
+#, c-format
+msgid "Image"
+msgstr "Image"
+
+#: any.pm:291 any.pm:300
#, c-format
msgid "Root"
msgstr "Root"
-#: ../../diskdrake/interactive.pm:1
+#: any.pm:292 any.pm:313
#, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "เลือก RAID เพื่อเพิ่มเข้าไป"
+msgid "Append"
+msgstr "Append"
-#: ../../keyboard.pm:1
+#: any.pm:294
#, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ตุรกี (โมเดลสมัยใหม่ \"Q\")"
+msgid "Video mode"
+msgstr "โหมดของการแสดงผล"
-#: ../../standalone/drakboot:1
+#: any.pm:296
#, c-format
-msgid "Lilo message not found"
-msgstr ""
+msgid "Initrd"
+msgstr "Initrd"
-#: ../../services.pm:1
+#: any.pm:305 any.pm:310 any.pm:312
#, c-format
-msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
-msgstr ""
+msgid "Label"
+msgstr "Label"
-#: ../../standalone/drakfloppy:1
+#: any.pm:307 any.pm:317 harddrake/v4l.pm:236 standalone/drakfloppy:88
+#: standalone/drakfloppy:94
#, c-format
-msgid "if needed"
-msgstr "ถ้าต้องการ"
+msgid "Default"
+msgstr "Default"
-#: ../../standalone/drakclock:1
+#: any.pm:314
#, c-format
-msgid ""
-"We need to install ntp package\n"
-" to enable Network Time Protocol"
-msgstr ""
+msgid "Initrd-size"
+msgstr "Initrd-size"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "เรียกคืนจากไฟล์"
+#: any.pm:316
+#, c-format
+msgid "NoVideo"
+msgstr "NoVideo"
-#: ../../standalone/drakbackup:1
+#: any.pm:327
#, c-format
-msgid "Store the password for this system in drakbackup configuration."
-msgstr ""
+msgid "Empty label not allowed"
+msgstr "ไม่อนุญาตให้มีหัวข้อว่าง"
-#: ../../install_messages.pm:1
+#: any.pm:328
#, c-format
-msgid ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
+msgid "You must specify a kernel image"
msgstr ""
-"Introduction\n"
-"\n"
-"The operating system and the different components available in the Mandrake "
-"Linux distribution \n"
-"shall be called the \"Software Products\" hereafter. The Software Products "
-"include, but are not \n"
-"restricted to, the set of programs, methods, rules and documentation related "
-"to the operating \n"
-"system and the different components of the Mandrake Linux distribution.\n"
-"\n"
-"\n"
-"1. License Agreement\n"
-"\n"
-"Please read this document carefully. This document is a license agreement "
-"between you and \n"
-"MandrakeSoft S.A. which applies to the Software Products.\n"
-"By installing, duplicating or using the Software Products in any manner, you "
-"explicitly \n"
-"accept and fully agree to conform to the terms and conditions of this "
-"License. \n"
-"If you disagree with any portion of the License, you are not allowed to "
-"install, duplicate or use \n"
-"the Software Products. \n"
-"Any attempt to install, duplicate or use the Software Products in a manner "
-"which does not comply \n"
-"with the terms and conditions of this License is void and will terminate "
-"your rights under this \n"
-"License. Upon termination of the License, you must immediately destroy all "
-"copies of the \n"
-"Software Products.\n"
-"\n"
-"\n"
-"2. Limited Warranty\n"
-"\n"
-"The Software Products and attached documentation are provided \"as is\", "
-"with no warranty, to the \n"
-"extent permitted by law.\n"
-"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
-"law, be liable for any special,\n"
-"incidental, direct or indirect damages whatsoever (including without "
-"limitation damages for loss of \n"
-"business, interruption of business, financial loss, legal fees and penalties "
-"resulting from a court \n"
-"judgment, or any other consequential loss) arising out of the use or "
-"inability to use the Software \n"
-"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
-"occurence of such \n"
-"damages.\n"
-"\n"
-"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
-"COUNTRIES\n"
-"\n"
-"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
-"in no circumstances, be \n"
-"liable for any special, incidental, direct or indirect damages whatsoever "
-"(including without \n"
-"limitation damages for loss of business, interruption of business, financial "
-"loss, legal fees \n"
-"and penalties resulting from a court judgment, or any other consequential "
-"loss) arising out \n"
-"of the possession and use of software components or arising out of "
-"downloading software components \n"
-"from one of Mandrake Linux sites which are prohibited or restricted in some "
-"countries by local laws.\n"
-"This limited liability applies to, but is not restricted to, the strong "
-"cryptography components \n"
-"included in the Software Products.\n"
-"\n"
-"\n"
-"3. The GPL License and Related Licenses\n"
-"\n"
-"The Software Products consist of components created by different persons or "
-"entities. Most \n"
-"of these components are governed under the terms and conditions of the GNU "
-"General Public \n"
-"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
-"licenses allow you to use, \n"
-"duplicate, adapt or redistribute the components which they cover. Please "
-"read carefully the terms \n"
-"and conditions of the license agreement for each component before using any "
-"component. Any question \n"
-"on a component license should be addressed to the component author and not "
-"to MandrakeSoft.\n"
-"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
-"Documentation written \n"
-"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
-"documentation for \n"
-"further details.\n"
-"\n"
-"\n"
-"4. Intellectual Property Rights\n"
-"\n"
-"All rights to the components of the Software Products belong to their "
-"respective authors and are \n"
-"protected by intellectual property and copyright laws applicable to software "
-"programs.\n"
-"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
-"Products, as a whole or in \n"
-"parts, by all means and for all purposes.\n"
-"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
-"MandrakeSoft S.A. \n"
-"\n"
-"\n"
-"5. Governing Laws \n"
-"\n"
-"If any portion of this agreement is held void, illegal or inapplicable by a "
-"court judgment, this \n"
-"portion is excluded from this contract. You remain bound by the other "
-"applicable sections of the \n"
-"agreement.\n"
-"The terms and conditions of this License are governed by the Laws of "
-"France.\n"
-"All disputes on the terms of this license will preferably be settled out of "
-"court. As a last \n"
-"resort, the dispute will be referred to the appropriate Courts of Law of "
-"Paris - France.\n"
-"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../standalone/drakboot:1
+#: any.pm:328
#, fuzzy, c-format
-msgid "Default user"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "You must specify a root partition"
+msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
+
+#: any.pm:329
+#, c-format
+msgid "This label is already used"
+msgstr "หัวข้อนี้ถูกใช้ไปเรียบร้อยแล้ว"
+
+#: any.pm:342
+#, c-format
+msgid "Which type of entry do you want to add?"
+msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"
-#: ../../standalone/draksplash:1
+#: any.pm:343 standalone/drakbackup:1904
+#, c-format
+msgid "Linux"
+msgstr "ลีนุกซ์"
+
+#: any.pm:343
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "ระบบปฏิบัติการอื่นๆ (SunOS...)"
+
+#: any.pm:344
+#, c-format
+msgid "Other OS (MacOS...)"
+msgstr "ระบบปฏิบัติการอื่นๆ (Mac OS...)"
+
+#: any.pm:344
+#, c-format
+msgid "Other OS (windows...)"
+msgstr "ระบบปฏิบัติการอื่นๆ (วินโดวส์...)"
+
+#: any.pm:372
#, c-format
msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
msgstr ""
+"ต่อไปนี้เป็นข้อมูลต่างๆ\n"
+"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "การคอนฟิก Internet"
-
-#: ../../printer/data.pm:1
+#: any.pm:504
#, c-format
-msgid "LPD - Line Printer Daemon"
+msgid "access to X programs"
msgstr ""
-#: ../../network/isdn.pm:1
+#: any.pm:505
#, c-format
-msgid ""
-"\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+msgid "access to rpm tools"
msgstr ""
-"\n"
-"ถ้าคุณมี การ์ด ISA ตัวเลขในหน้าต่อไปควรจะถูกต้องอยู่แล้ว\n"
-"\n"
-"ถ้าคุณมีการ์ด PCMCIA คุณต้องรู้ irq และ io ของการ์ดของคุณ\n"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+#: any.pm:506
+#, c-format
+msgid "allow \"su\""
+msgstr ""
-#: ../../keyboard.pm:1
+#: any.pm:507
#, c-format
-msgid "Gurmukhi"
+msgid "access to administrative files"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: any.pm:508
#, c-format
-msgid "%s already in use\n"
+msgid "access to network tools"
msgstr ""
-#: ../../any.pm:1
+#: any.pm:509
#, c-format
-msgid "Force No APIC"
+msgid "access to compilation tools"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: any.pm:515
#, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
+msgid "(already added %s)"
+msgstr "(เพิ่ม %s เรียบร้อยแล้ว)"
-#: ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "คีย์บอร์ด"
+#: any.pm:520
+#, c-format
+msgid "This password is too simple"
+msgstr "รหัสผ่านนี้ง่ายต่อการเดา"
-#: ../../network/network.pm:1
+#: any.pm:521
#, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Please give a user name"
+msgstr "โปรดป้อนชื่อผู้ใช้"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Install List"
-msgstr "ติดตั้งระบบ"
+#: any.pm:522
+#, c-format
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "ชื่อผู้ใช้จะสามารถมีได้เฉพาะตัวอักษรตัวเล็ก ตัวเลข '-' และ '_'"
-#: ../../standalone/drakbackup:1
+#: any.pm:523
#, fuzzy, c-format
-msgid ""
-"Change\n"
-"Restore Path"
-msgstr "เรียกคืนจากไฟล์"
+msgid "The user name is too long"
+msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
-#: ../../standalone/logdrake:1
+#: any.pm:524
#, c-format
-msgid "Show only for the selected day"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
-#: ../../standalone/drakbackup:1
+#: any.pm:528
#, c-format
-msgid "\tLimit disk usage to %s MB\n"
+msgid "Add user"
+msgstr "เพิ่มผู้ใช้"
+
+#: any.pm:529
+#, c-format
+msgid ""
+"Enter a user\n"
+"%s"
msgstr ""
+"ให้ใส่ผู้ใช้\n"
+"%s"
-#: ../../Xconfig/card.pm:1
+#: any.pm:532 diskdrake/dav.pm:68 diskdrake/hd_gtk.pm:158
+#: diskdrake/removable.pm:27 diskdrake/smbnfs_gtk.pm:82 help.pm:544
+#: interactive/http.pm:152 printer/printerdrake.pm:165
+#: printer/printerdrake.pm:352 printer/printerdrake.pm:3871
+#: standalone/drakbackup:3094 standalone/scannerdrake:629
+#: standalone/scannerdrake:779
#, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Done"
+msgstr "ทำเรียบร้อยแล้ว"
-#: ../../standalone/scannerdrake:1
+#: any.pm:533 help.pm:52
#, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
-msgstr ""
+msgid "Accept user"
+msgstr "ยอมรับผู้ใช้"
-#: ../../standalone/logdrake:1
+#: any.pm:544
#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+msgid "Real name"
+msgstr "ชื่อเต็ม"
-#: ../../network/isdn.pm:1
+#: any.pm:545 help.pm:52 printer/printerdrake.pm:1339
+#: printer/printerdrake.pm:1453
#, c-format
-msgid "What kind of card do you have?"
-msgstr "คุณมีการ์ดชนิดใด?"
+msgid "User name"
+msgstr "ชื่อผู้ใช้"
-#: ../../standalone/logdrake:1
+#: any.pm:548
#, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Shell"
+msgstr "เชลล์ที่ใช้"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: any.pm:550
#, c-format
-msgid "Security"
-msgstr "ระบบความป้องกัน"
+msgid "Icon"
+msgstr "Icon"
-#: ../../printer/printerdrake.pm:1
+#: any.pm:591 security/l10n.pm:14
#, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
+msgid "Autologin"
+msgstr "Autologin"
+
+#: any.pm:592
+#, fuzzy, c-format
+msgid "I can set up your computer to automatically log on one user."
msgstr ""
+"ผมไม่สามารถทำให้ท่านเข้าทำงานโดยใช้ชื่อคนคนหนึ่งแบบอัตโนมัติ\n"
+"ถ้าคุณไม่ต้องการใช้งานรูปแบบนี้กรุณากดปุ่มยกเลิก"
+
+#: any.pm:593 help.pm:52
+#, fuzzy, c-format
+msgid "Do you want to use this feature?"
+msgstr "คุณต้องการใช้ aboot หรือไม่"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/printerdrake:1
+#: any.pm:594
#, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "Choose the default user:"
+msgstr "เลือกผู้ใช้ default"
+
+#: any.pm:595
+#, c-format
+msgid "Choose the window manager to run:"
+msgstr "เลือก window manager:"
-#: ../../standalone/drakbackup:1
+#: any.pm:607
#, fuzzy, c-format
-msgid "Unable to find backups to restore...\n"
+msgid "Please choose a language to use."
msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Generic"
+#: any.pm:628
+#, c-format
+msgid ""
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
-#: ../../printer/printerdrake.pm:1
+#: any.pm:646 help.pm:660
#, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid "Use Unicode by default"
msgstr ""
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+#: any.pm:647 help.pm:660
+#, fuzzy, c-format
+msgid "All languages"
+msgstr "เลือกภาษาที่คุณใช้"
+
+#: any.pm:683 help.pm:581 help.pm:991 install_steps_interactive.pm:907
+#, fuzzy, c-format
+msgid "Country / Region"
+msgstr "ขนาดจอภาพ"
+
+#: any.pm:684
+#, fuzzy, c-format
+msgid "Please choose your country."
+msgstr "คุณมีเม้าส์ชนิดใด"
+
+#: any.pm:686
+#, fuzzy, c-format
+msgid "Here is the full list of available countries"
+msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
-#: ../../standalone/logdrake:1
+#: any.pm:687 diskdrake/interactive.pm:292 help.pm:544 help.pm:581 help.pm:621
+#: help.pm:991 install_steps_interactive.pm:114
#, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "More"
+msgstr "More"
-#: ../../network/isdn.pm:1
+#: any.pm:818
#, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
-msgstr ""
-"Rest of the world \n"
-"No D-Channel (leased lines)"
+msgid "No sharing"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../standalone/drakTermServ:1
+#: any.pm:818
+#, fuzzy, c-format
+msgid "Allow all users"
+msgstr "เพิ่มผู้ใช้"
+
+#: any.pm:822
#, c-format
msgid ""
-" - /etc/xinetd.d/tftp:\n"
-" \tdrakTermServ will configure this file to work in conjunction with "
-"the images created\n"
-" \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to \n"
-" \teach diskless client.\n"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
"\n"
-" \tA typical tftp configuration file looks like:\n"
-" \t\t\n"
-" \tservice tftp\n"
-"\t\t\t{\n"
-" disable = no\n"
-" socket_type = dgram\n"
-" protocol = udp\n"
-" wait = yes\n"
-" user = root\n"
-" server = /usr/sbin/in.tftpd\n"
-" server_args = -s /var/lib/tftpboot\n"
-" \t}\n"
-" \t\t\n"
-" \tThe changes here from the default installation are changing the "
-"disable flag to\n"
-" \t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-" \tputs its images."
+"\"Custom\" permit a per-user granularity.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: any.pm:838
#, c-format
-msgid "Option %s must be a number!"
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
msgstr ""
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: any.pm:846
#, fuzzy, c-format
-msgid "Notice"
-msgstr "NoVideo"
+msgid "The package %s is going to be removed."
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
-#: ../../install_steps_interactive.pm:1
+#: any.pm:858
#, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "Launch userdrake"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: any.pm:860
#, c-format
msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "What type of partitioning?"
-msgstr "การทำ partitioning ชนิดใด?"
+#: authentication.pm:12
+#, fuzzy, c-format
+msgid "Local files"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/drakbackup:1
+#: authentication.pm:12
#, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "LDAP"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Interface"
-msgstr "Interface"
-
-#: ../../standalone/drakbackup:1
+#: authentication.pm:12
#, fuzzy, c-format
-msgid "Multisession CD"
-msgstr "Multimedia - เขียน CD "
+msgid "NIS"
+msgstr "ใช้ NIS"
-#: ../../modules/parameters.pm:1
+#: authentication.pm:12 authentication.pm:50
#, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "ฟอร์แมตพาร์ติชั่น"
-
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "These are the machines from which the scanners should be used:"
-msgstr ""
+msgid "Windows Domain"
+msgstr "โดเมน NIS"
-#: ../../standalone/logdrake:1
+#: authentication.pm:33
#, fuzzy, c-format
-msgid "Messages"
-msgstr "ข้อความ"
+msgid "Authentication LDAP"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../../harddrake/v4l.pm:1
+#: authentication.pm:34
#, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid "LDAP Base dn"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: authentication.pm:35
#, fuzzy, c-format
-msgid "POP and IMAP Server"
+msgid "LDAP Server"
msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mexico"
-msgstr "Mouse"
-
-#: ../../standalone/harddrake2:1
+#: authentication.pm:40
#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "ฟอร์แมต"
+msgid "Authentication NIS"
+msgstr "การตรวจสอบสิทธิ์การใช้งานของ NIS"
-#: ../../lang.pm:1
+#: authentication.pm:41
#, c-format
-msgid "Rwanda"
-msgstr ""
+msgid "NIS Domain"
+msgstr "โดเมน NIS"
-#: ../../lang.pm:1
+#: authentication.pm:42
#, c-format
-msgid "Switzerland"
-msgstr ""
+msgid "NIS Server"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../lang.pm:1
+#: authentication.pm:47
#, c-format
-msgid "Brunei Darussalam"
+msgid ""
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
msgstr ""
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"
+#: authentication.pm:49
+#, fuzzy, c-format
+msgid "Authentication Windows Domain"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../../standalone/drakTermServ:1
+#: authentication.pm:51
#, fuzzy, c-format
-msgid "You must be root to read configuration file. \n"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+msgid "Domain Admin User Name"
+msgstr "ชื่อโดเมน"
-#: ../../printer/printerdrake.pm:1
+#: authentication.pm:52
#, c-format
-msgid "Remote lpd Printer Options"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
+msgid "Domain Admin Password"
+msgstr ""
-#: ../../help.pm:1
+#: authentication.pm:83
#, c-format
+msgid "Can't use broadcast with no NIS domain"
+msgstr ""
+
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: bootloader.pm:542
+#, fuzzy, c-format
msgid ""
-"GNU/Linux is a multi-user system, meaning each user may have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", who is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configurations, protecting the system from unintentional or malicious\n"
-"changes that impact on the system as a whole. You will have to create at\n"
-"least one regular user for yourself -- this is the account which you should\n"
-"use for routine, day-to-day use. Although it is very easy to log in as\n"
-"\"root\" to do anything and everything, it may also be very dangerous! A\n"
-"very simple mistake could mean that your system will not work any more. If\n"
-"you make a serious mistake as a regular user, the worst that will happen is\n"
-"that you will lose some information, but not affect the entire system.\n"
+"Welcome to the operating system chooser!\n"
"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in this field and copy it to the \"%s\" field, which is the name\n"
-"this user will enter to log onto the system. If you like, you may override\n"
-"the default and change the username. The next step is to enter a password.\n"
-"From a security point of view, a non-privileged (regular) user password is\n"
-"not as crucial as the \"root\" password, but that is no reason to neglect\n"
-"it by making it blank or too simple: after all, your files could be the\n"
-"ones at risk.\n"
+"Choose an operating system from the list above or\n"
+"wait for default boot.\n"
"\n"
-"Once you click on \"%s\", you can add other users. Add a user for each one\n"
-"of your friends: your father or your sister, for example. Click \"%s\" when\n"
-"you have finished adding users.\n"
+msgstr ""
+"ยินดีต้อนรับสู่ %s โปรแกรมเลือกใช้ระบบปฏิบัติการ!\n"
"\n"
-"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
-"that user (bash by default).\n"
+"เลือกระบบปฏิบัติการหรือ\n"
+"รอ %d วินาทีเพื่อใช้การบูตจากตัวเลือกตั้งต้น\n"
"\n"
-"When you have finished adding users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"%s\".\n"
-"If you are not interested in this feature, uncheck the \"%s\" box."
-msgstr ""
-#: ../../standalone/drakconnect:1
+#: bootloader.pm:674
#, c-format
-msgid "Configure Internet Access..."
-msgstr "ปรับแต่งการติดต่อเข้า internet"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose the time interval between each backup"
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "SILO"
+msgstr "SILO"
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "นอร์เวย์"
+#: bootloader.pm:676 help.pm:768
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "LILO แบบ graphical menu"
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Delete profile"
-msgstr "ลบ profile..."
+#: bootloader.pm:677 help.pm:768
+#, c-format
+msgid "LILO with text menu"
+msgstr "LILO แบบ text menu"
-#: ../../keyboard.pm:1
+#: bootloader.pm:679
#, c-format
-msgid "Danish"
-msgstr "เดนมาร์ก"
+msgid "Grub"
+msgstr "Grub"
-#: ../../services.pm:1
+#: bootloader.pm:681
#, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
+msgid "Yaboot"
+msgstr "Yaboot"
-#: ../../network/network.pm:1
+#: bootloader.pm:1150
#, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
-msgstr ""
-"โปรดกรอกข้อมูลการคอนฟิกค่า IP สำหรับเครื่องนี้\n"
-"ข้อมูลแต่ละอย่างสามารถใส่เข้าไปได้โดยใช้ค่า IP ในรูปแบบตัวเลขคั่นด้วยจุด\n"
-"(dotted-decimal notation) ตัวอย่างเช่น 1.2.3.4"
+msgid "not enough room in /boot"
+msgstr "ไม่มีที่พอใน /boot"
-#: ../../help.pm:1
+#: bootloader.pm:1178
+#, fuzzy, c-format
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
+
+#: bootloader.pm:1218
#, c-format
msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
+"Your bootloader configuration must be updated because partition has been "
+"renumbered"
msgstr ""
-#: ../../standalone/drakperm:1
+#: bootloader.pm:1225
#, c-format
-msgid "When checked, owner and group won't be changed"
+msgid ""
+"The bootloader can't be installed correctly. You have to boot rescue and "
+"choose \"%s\""
msgstr ""
-#: ../../lang.pm:1
+#: bootloader.pm:1226
#, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "อังการี"
+msgid "Re-install Boot Loader"
+msgstr "ติดตั้งบูตโหลดเดอร์"
-#: ../../standalone/drakbackup:1
+#: common.pm:125
#, c-format
-msgid "Tuesday"
-msgstr "อังคาร"
+msgid "KB"
+msgstr "KB"
-#: ../../harddrake/data.pm:1
+#: common.pm:125
#, c-format
-msgid "Processors"
-msgstr ""
+msgid "MB"
+msgstr "MB"
-#: ../../lang.pm:1
+#: common.pm:125
#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "ไม่เชื่อมต่อ"
+msgid "GB"
+msgstr "GB"
-#: ../../network/netconnect.pm:1
+#: common.pm:133
#, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
-msgstr ""
+msgid "TB"
+msgstr "TB"
-#: ../../diskdrake/interactive.pm:1
+#: common.pm:141
#, c-format
-msgid "partition %s is now known as %s"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "%d minutes"
+msgstr "%d นาที"
-#: ../../lang.pm:1
+#: common.pm:143
#, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
+msgid "1 minute"
+msgstr "1 นาที"
-#: ../../printer/printerdrake.pm:1
+#: common.pm:145
#, c-format
-msgid "SMB server IP"
-msgstr "ค่า IP ของ SMB เซิร์ฟเวอร์"
+msgid "%d seconds"
+msgstr "%d วินาที"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ตารางพาร์ติชั่นของไดรฟ์ %s จะถูกบันทึกลงไปในดิสก์"
+#: common.pm:196
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
-#: ../../printer/printerdrake.pm:1
+#: common.pm:203
#, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+msgid "Screenshots will be available after install in %s"
+msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
-#: ../../any.pm:1
+#: common.pm:268
#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"บูตดิสก์แบบแก้ไขได้ตามความต้องการของผู้ใช้ จะช่วยให้คุณสามารถบูตระบบลีนุกซ์\n"
-"ไม่ต้องเข้าสู่กระบวนการของบูตโหลดเดอร์ตามปกติ ซึ่งจะเป็นประโยชน์มากหากคุณ\n"
-"ไม่ได้ติดตั้ง LILO ลงในระบบของคุณ หรือหาก LILO ถูกลบออกไปเนื่องจากมีการ\n"
-"ระบบปฏิบัติการแบบอื่นๆ หรือ LILO ไม่ทำงานกับการคอนฟิกฮาร์ดแวร์ แผ่นบูตดิสก์\n"
-"จะสามารถใช้กับอิมเมจกู้คืนระบบของแมนเดร็ก ซึ่งจะช่วยให้คุณสามารถทำการกู้\n"
-"คืนระบบจากความผิดพลาดได้ด้วย คุณต้องการจะสร้างแผ่นบูตหรือไม่? \n"
-"%s"
+msgid "kdesu missing"
+msgstr "ไม่มี kdesu "
-#: ../../standalone/drakbackup:1
+#: common.pm:271
#, c-format
-msgid ""
-"\n"
-" DrakBackup Daemon Report\n"
+msgid "consolehelper missing"
msgstr ""
-#: ../../keyboard.pm:1
+#: crypto.pm:14 crypto.pm:28 lang.pm:231 network/adsl_consts.pm:37
+#: network/adsl_consts.pm:48 network/adsl_consts.pm:58
+#: network/adsl_consts.pm:68 network/adsl_consts.pm:79
+#: network/adsl_consts.pm:90 network/adsl_consts.pm:100
+#: network/adsl_consts.pm:110 network/netconnect.pm:46
#, fuzzy, c-format
-msgid "Latvian"
-msgstr "ตำแหน่ง"
+msgid "France"
+msgstr "ฝรั่งเศษ"
-#: ../../standalone/drakbackup:1
+#: crypto.pm:15 lang.pm:207
#, c-format
-msgid "monthly"
-msgstr ""
+msgid "Costa Rica"
+msgstr "คอสตาริกา"
-#: ../../../move/move.pm:1
+#: crypto.pm:16 crypto.pm:29 lang.pm:179 network/adsl_consts.pm:20
+#: network/adsl_consts.pm:30 network/netconnect.pm:49
#, fuzzy, c-format
-msgid "Retry"
-msgstr "เรียกคืนจากไฟล์"
+msgid "Belgium"
+msgstr "เบลเยี่ยม"
-#: ../../standalone/drakfloppy:1
+#: crypto.pm:17 crypto.pm:30 lang.pm:212
#, c-format
-msgid "Module name"
-msgstr "ชี่อ module"
+msgid "Czech Republic"
+msgstr "สาธารณรัฐเช็ค"
-#: ../../network/network.pm:1
+#: crypto.pm:18 crypto.pm:31 lang.pm:213 network/adsl_consts.pm:126
+#: network/adsl_consts.pm:134
#, fuzzy, c-format
-msgid "Start at boot"
-msgstr "เริ่มทำงานตอน boot"
+msgid "Germany"
+msgstr "เยอรมัน"
+
+#: crypto.pm:19 crypto.pm:32 lang.pm:244
+#, fuzzy, c-format
+msgid "Greece"
+msgstr "กรีก"
-#: ../../standalone/drakbackup:1
+#: crypto.pm:20 crypto.pm:33 lang.pm:317
+#, fuzzy, c-format
+msgid "Norway"
+msgstr "นอร์เวย์"
+
+#: crypto.pm:21 crypto.pm:34 lang.pm:346 network/adsl_consts.pm:230
+#, fuzzy, c-format
+msgid "Sweden"
+msgstr "สวีเดน"
+
+#: crypto.pm:22 crypto.pm:36 lang.pm:316 network/adsl_consts.pm:170
+#: network/netconnect.pm:47
#, c-format
-msgid "Use Incremental Backups"
-msgstr ""
+msgid "Netherlands"
+msgstr "เนเธอร์แลนด์"
+
+#: crypto.pm:23 crypto.pm:37 lang.pm:264 network/adsl_consts.pm:150
+#: network/adsl_consts.pm:160 network/netconnect.pm:48 standalone/drakxtv:48
+#, fuzzy, c-format
+msgid "Italy"
+msgstr "อิตาลี"
+
+#: crypto.pm:24 crypto.pm:38 lang.pm:172
+#, fuzzy, c-format
+msgid "Austria"
+msgstr "พอร์ตอนุกรม"
-#: ../../any.pm:1
+#: crypto.pm:35 crypto.pm:61 lang.pm:380 network/netconnect.pm:50
#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "เซ็กเตอร์แรกของไดรว์ (MBR)"
+msgid "United States"
+msgstr "สหรัฐอเมริกา"
-#: ../../lang.pm:1
+#: diskdrake/dav.pm:19
#, c-format
-msgid "El Salvador"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: diskdrake/dav.pm:27
+#, fuzzy, c-format
+msgid "New"
+msgstr "ใหม่"
+
+#: diskdrake/dav.pm:63 diskdrake/interactive.pm:417 diskdrake/smbnfs_gtk.pm:75
#, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Unmount"
+msgstr "เลิกเม้าท์์ระบบไฟล์"
-#: ../../standalone/harddrake2:1
+#: diskdrake/dav.pm:64 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:76
#, c-format
-msgid "DVD"
-msgstr ""
+msgid "Mount"
+msgstr "เม้าท์"
-#: ../../any.pm:1 ../../help.pm:1
+#: diskdrake/dav.pm:65 help.pm:137
#, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "Server"
+msgstr "เซิร์ฟเวอร์"
-#: ../../standalone/harddrake2:1
+#: diskdrake/dav.pm:66 diskdrake/interactive.pm:408
+#: diskdrake/interactive.pm:616 diskdrake/interactive.pm:635
+#: diskdrake/removable.pm:24 diskdrake/smbnfs_gtk.pm:79
#, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
-msgstr ""
+msgid "Mount point"
+msgstr "กำหนดจุดเม้าท์"
-#: ../../standalone/drakclock:1
+#: diskdrake/dav.pm:85
#, fuzzy, c-format
-msgid "Is your hardware clock set to GMT?"
-msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"
+msgid "Please enter the WebDAV server URL"
+msgstr "กรุณาทดสอบเม้าส์"
-#: ../../diskdrake/interactive.pm:1
+#: diskdrake/dav.pm:89
#, c-format
-msgid "Trying to rescue partition table"
-msgstr "กำลังพยายามกู้ตารางพาร์ติชั่นคืน"
+msgid "The URL must begin with http:// or https://"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/dav.pm:111
+#, fuzzy, c-format
+msgid "Server: "
+msgstr "เซิร์ฟเวอร์"
+
+#: diskdrake/dav.pm:112 diskdrake/interactive.pm:469
+#: diskdrake/interactive.pm:1149 diskdrake/interactive.pm:1225
#, c-format
-msgid "Option %s must be an integer number!"
-msgstr ""
+msgid "Mount point: "
+msgstr "จุดเม้าท์: "
+
+#: diskdrake/dav.pm:113 diskdrake/interactive.pm:1233
+#, fuzzy, c-format
+msgid "Options: %s"
+msgstr "พาร์ติชั่น %s"
-#: ../../security/l10n.pm:1
+#: diskdrake/hd_gtk.pm:96 diskdrake/interactive.pm:995
+#: diskdrake/interactive.pm:1005 diskdrake/interactive.pm:1065
#, c-format
-msgid "Use password to authenticate users"
-msgstr ""
+msgid "Read carefully!"
+msgstr "โปรดอ่านอย่างถี่ถ้วน!"
-#: ../../interactive/stdio.pm:1
+#: diskdrake/hd_gtk.pm:96
#, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
+msgid "Please make a backup of your data first"
+msgstr "กรุณาทำ backup ก่อน"
-#: ../../standalone/drakbackup:1
+#: diskdrake/hd_gtk.pm:99
#, c-format
msgid ""
-"For backups to other media, files are still created on the hard drive, then "
-"moved to the other media. Enabling this option will remove the hard drive "
-"tar files after the backup."
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
msgstr ""
+"ถ้าคุณต้องการใช้ aboot ควรระวังว่าต้องมีที่ว่าง (2048 sectors) \n"
+"ด้านหน้าของ disk"
-#: ../../standalone/livedrake:1
+#: diskdrake/hd_gtk.pm:156 help.pm:544
#, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "ไม่สามารถเริ่ม live upgrade !!!\n"
+msgid "Wizard"
+msgstr "Wizard"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: diskdrake/hd_gtk.pm:189
#, c-format
-msgid "Name: "
-msgstr "ชื่อ: "
+msgid "Choose action"
+msgstr "เลือกกิจกรรม"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "up"
+#: diskdrake/hd_gtk.pm:193
+#, fuzzy, c-format
+msgid ""
+"You have one big Microsoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
msgstr ""
+"ถ้าคุณมี พาร์ติชั่น FAT ที่ใหญ่ พาร์ติชั่น เดียว\n"
+"(ซึ่งโดยปกติ Microsoft Dos/Windows ใข้)\n"
+"ผมแนะนำให้คุณปรับขนาด พาร์ติชั่น เสียก่อน\n"
+"(กดที่มันแล้วกด \"ปรับขนาด\")"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: diskdrake/hd_gtk.pm:195
#, c-format
-msgid "16 million colors (24 bits)"
-msgstr "สิบหกล้านสี (24 บิต)"
+msgid "Please click on a partition"
+msgstr "โปรดเลือกพาร์ติชั่น"
+
+#: diskdrake/hd_gtk.pm:209 diskdrake/smbnfs_gtk.pm:63 install_steps_gtk.pm:475
+#, c-format
+msgid "Details"
+msgstr "รายละเอียด"
-#: ../../any.pm:1
+#: diskdrake/hd_gtk.pm:255
#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "เพิ่มผู้ใช้"
+msgid "No hard drives found"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../advertising/08-store.pl:1
+#: diskdrake/hd_gtk.pm:326
#, c-format
-msgid "The official MandrakeSoft Store"
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: diskdrake/hd_gtk.pm:326
+#, fuzzy, c-format
+msgid "Journalised FS"
+msgstr "การเม้าท์ล้มเหลว"
+
+#: diskdrake/hd_gtk.pm:326
#, c-format
-msgid "Resizing"
-msgstr "ปรับขนาด"
+msgid "Swap"
+msgstr "สวอป"
-#: ../../standalone/drakbackup:1
+#: diskdrake/hd_gtk.pm:326
#, c-format
-msgid ""
-"Enter the maximum size\n"
-" allowed for Drakbackup (MB)"
-msgstr ""
+msgid "SunOS"
+msgstr "SunOS"
-#: ../../network/netconnect.pm:1
+#: diskdrake/hd_gtk.pm:326
#, c-format
-msgid "Cable connection"
-msgstr "cable connection"
+msgid "HFS"
+msgstr "HFS"
-#: ../../standalone/drakperm:1 ../../standalone/logdrake:1
+#: diskdrake/hd_gtk.pm:326
#, fuzzy, c-format
-msgid "User"
-msgstr "ชื่อผู้ใช้"
+msgid "Windows"
+msgstr "โดเมน NIS"
-#: ../../standalone/drakbackup:1
+#: diskdrake/hd_gtk.pm:327 install_steps_gtk.pm:327 mouse.pm:167
+#: services.pm:164 standalone/drakbackup:1947 standalone/drakperm:250
#, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
-msgstr ""
+msgid "Other"
+msgstr "อื่นๆ"
-#: ../../raid.pm:1
+#: diskdrake/hd_gtk.pm:327 diskdrake/interactive.pm:1165
#, c-format
-msgid "mkraid failed"
-msgstr "mkraid failed"
+msgid "Empty"
+msgstr "ว่าง"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "ชื่อ: "
+#: diskdrake/hd_gtk.pm:331
+#, c-format
+msgid "Filesystem types:"
+msgstr "ประเภทของระบบไฟล์:"
-#: ../../install_steps_interactive.pm:1
+#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:350 diskdrake/hd_gtk.pm:353
#, c-format
-msgid "Button 3 Emulation"
-msgstr ""
+msgid "Use ``%s'' instead"
+msgstr "ใช้ ``%s'' แทน"
-#: ../../security/l10n.pm:1
+#: diskdrake/hd_gtk.pm:348 diskdrake/hd_gtk.pm:353
+#: diskdrake/interactive.pm:409 diskdrake/interactive.pm:569
+#: diskdrake/removable.pm:26 diskdrake/removable.pm:49
+#: standalone/harddrake2:67
#, c-format
-msgid "Check additions/removals of sgid files"
-msgstr ""
+msgid "Type"
+msgstr "ประเภท"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Sending files..."
-msgstr "บันทึกลงไฟล์"
+#: diskdrake/hd_gtk.pm:348 diskdrake/interactive.pm:431
+#, c-format
+msgid "Create"
+msgstr "สร้าง"
-#: ../../keyboard.pm:1
+#: diskdrake/hd_gtk.pm:350 diskdrake/interactive.pm:418
+#: standalone/drakperm:124 standalone/printerdrake:231
#, c-format
-msgid "Israeli (Phonetic)"
-msgstr "อิลราเอล (โฟเนติค)"
+msgid "Delete"
+msgstr "ลบ"
-#: ../../any.pm:1
+#: diskdrake/hd_gtk.pm:353
#, c-format
-msgid "access to rpm tools"
-msgstr ""
+msgid "Use ``Unmount'' first"
+msgstr "ใช้ ``Unmount'' ก่อน"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:179
#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+msgid "Choose another partition"
+msgstr "สร้างพาร์ติชั่นใหม่"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Permission problem accessing CD."
-msgstr ""
+#: diskdrake/interactive.pm:179
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "เลือกกิจกรรม"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: diskdrake/interactive.pm:208
+#, fuzzy, c-format
+msgid "Exit"
+msgstr "Ext2"
+
+#: diskdrake/interactive.pm:241 help.pm:544
#, c-format
-msgid "Phone number"
-msgstr "หมายเลขโทรศัพท์"
+msgid "Undo"
+msgstr "ยกเลิก"
-#: ../../harddrake/sound.pm:1
+#: diskdrake/interactive.pm:241
#, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
-msgstr ""
+msgid "Toggle to normal mode"
+msgstr "สำหรับผู้ชำนาญ > ปกติ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+#: diskdrake/interactive.pm:241
+#, c-format
+msgid "Toggle to expert mode"
+msgstr "ปกติ > สำหรับผู้ชำนาญ"
-#: ../../standalone/drakxtv:1
+#: diskdrake/interactive.pm:260
#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+msgid "Continue anyway?"
+msgstr "ทำงานต่อหรือไม่?"
-#: ../../Xconfig/card.pm:1
+#: diskdrake/interactive.pm:265
#, c-format
-msgid "Use Xinerama extension"
-msgstr "Use Xinerama extension"
+msgid "Quit without saving"
+msgstr "ออกโดยไม่ต้องบันทึก"
-#: ../../diskdrake/interactive.pm:1
+#: diskdrake/interactive.pm:265
#, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid "Quit without writing the partition table?"
+msgstr "ออกโดยไม่ต้องเขียนตารางพาร์ติชั่น"
-#: ../../standalone/drakxtv:1
+#: diskdrake/interactive.pm:270
#, fuzzy, c-format
-msgid "West Europe"
-msgstr "ยุโรป"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:277 install_steps_interactive.pm:301
#, c-format
-msgid "On CD-R"
-msgstr ""
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "คุณต้องทำการรีบูตระบบให้เครื่องรับทราบการเปลี่ยนแปลงตารางพาร์ติชั่น"
-#: ../../standalone.pm:1
+#: diskdrake/interactive.pm:290 help.pm:544
#, c-format
-msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-" --help - print this help message.\n"
-" --report - program should be one of mandrake tools\n"
-" --incident - program should be one of mandrake tools"
-msgstr ""
+msgid "Clear all"
+msgstr "ล้างทั้งหมด"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version %s"
-msgstr "การตรวจหาฮาร์ดไดรว์"
+#: diskdrake/interactive.pm:291 help.pm:544
+#, c-format
+msgid "Auto allocate"
+msgstr "กำหนดแบบอัตโนมัติ"
-#: ../../standalone/drakfloppy:1
+#: diskdrake/interactive.pm:297
#, fuzzy, c-format
-msgid "Preferences"
-msgstr "ข้อกำหนด: "
+msgid "Hard drive information"
+msgstr "การตรวจหาฮาร์ดไดรว์"
-#: ../../lang.pm:1
+#: diskdrake/interactive.pm:329
#, c-format
-msgid "Swaziland"
-msgstr ""
+msgid "All primary partitions are used"
+msgstr "พาร์ติชั่นแบบ primary ถูกใช้ทั้งหมดแล้ว"
-#: ../../lang.pm:1
+#: diskdrake/interactive.pm:330
#, c-format
-msgid "Dominican Republic"
-msgstr ""
+msgid "I can't add any more partition"
+msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
-#: ../../diskdrake/interactive.pm:1
+#: diskdrake/interactive.pm:331
#, c-format
-msgid "Copying %s"
+msgid ""
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
msgstr ""
+"หากต้องการเพิ่มพาร์ติชั่น โปรดลบพาร์ติชั่นทิ้งหนึ่งพาร์ติชั่นเพื่อสร้าง\n"
+"พาร์ติชั่นแบบ extended ได้"
-#: ../../standalone/draksplash:1
+#: diskdrake/interactive.pm:342 help.pm:544
#, fuzzy, c-format
-msgid "Choose color"
-msgstr "เลือกจอภาพ"
+msgid "Save partition table"
+msgstr "บันทึกตารางพาร์ติชั่น"
-#: ../../keyboard.pm:1
+#: diskdrake/interactive.pm:343 help.pm:544
#, fuzzy, c-format
-msgid "Syriac"
-msgstr "พอร์ตอนุกรม"
+msgid "Restore partition table"
+msgstr "กู้ตารางพาร์ติชั่น"
-#: ../../standalone/drakperm:1
+#: diskdrake/interactive.pm:344 help.pm:544
#, c-format
-msgid "Set-UID"
-msgstr ""
+msgid "Rescue partition table"
+msgstr "กู้ตารางพาร์ติชั่น"
-#: ../../help.pm:1
+#: diskdrake/interactive.pm:346 help.pm:544
#, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on this partition\n"
-"will be lost and will not be recoverable!"
-msgstr ""
-"เลือก harddisk ที่ต้องการลบและลง Mandrake Linux\n"
-"ควรระวังเป็นอย่างมากดพราะว่าข้อมูลทุกอย่างจะถูกลบ\n"
-"และจะไม่สามารถกู้คืนได้"
+msgid "Reload partition table"
+msgstr "กู้ตารางพาร์ติชั่น"
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: diskdrake/interactive.pm:348
#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "ใช้ %c และ %c เพื่อเลือก."
+msgid "Removable media automounting"
+msgstr ""
-#: ../../mouse.pm:1
+#: diskdrake/interactive.pm:357 diskdrake/interactive.pm:377
#, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
+msgid "Select file"
+msgstr "เลือกไฟล์"
-#: ../../standalone/drakperm:1
+#: diskdrake/interactive.pm:364
#, c-format
-msgid "Enable \"%s\" to execute the file"
+msgid ""
+"The backup partition table has not the same size\n"
+"Still continue?"
msgstr ""
+"พาร์ติชั่นแบ็คอัพไม่มีขนาดเท่ากัน\n"
+"ต้องการทำต่อหรือไม่?"
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "ลบ logical volume ก่อน\n"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: diskdrake/interactive.pm:378 harddrake/sound.pm:222 keyboard.pm:311
+#: network/netconnect.pm:353 printer/printerdrake.pm:2159
+#: printer/printerdrake.pm:3246 printer/printerdrake.pm:3365
+#: printer/printerdrake.pm:4338 standalone/drakTermServ:1040
+#: standalone/drakTermServ:1715 standalone/drakbackup:765
+#: standalone/drakbackup:865 standalone/drakboot:137 standalone/drakclock:200
+#: standalone/drakconnect:856 standalone/drakfloppy:295
#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "OS ที่ถูกเลือกจะทำการ boot ใน %d วินาที"
+msgid "Warning"
+msgstr "คำเตือน"
-#: ../../standalone/drakboot:1
+#: diskdrake/interactive.pm:379
#, c-format
msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
msgstr ""
+"กรุณาใส่แผ่นฟล้อปปี้ในไดรว์\n"
+"ข้อมูลทั้งหมดบนแผ่นฟล้อปปี้จะถูกลบ"
-#: ../../standalone/drakconnect:1
+#: diskdrake/interactive.pm:390
#, c-format
-msgid "Internet access"
-msgstr "การติดต่อ internet"
+msgid "Trying to rescue partition table"
+msgstr "กำลังพยายามกู้ตารางพาร์ติชั่นคืน"
+
+#: diskdrake/interactive.pm:396
+#, fuzzy, c-format
+msgid "Detailed information"
+msgstr "แสดงข้อมูล"
-#: ../../standalone/draksplash:1
+#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:706
#, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
-msgstr ""
+msgid "Resize"
+msgstr "เปลี่ยนขนาด"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:774
#, c-format
-msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
-msgstr ""
+msgid "Move"
+msgstr "ย้าย"
-#: ../../standalone/drakgw:1
+#: diskdrake/interactive.pm:413
#, c-format
-msgid "Enabling servers..."
-msgstr "เริ่มทำงาน server"
+msgid "Format"
+msgstr "ฟอร์แมต"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:415
#, c-format
-msgid "Printing test page(s)..."
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+msgid "Add to RAID"
+msgstr "เพิ่มให้ RAID"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:416
#, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Add to LVM"
+msgstr "เพิ่มให้ LVM"
-#: ../../fsedit.pm:1
+#: diskdrake/interactive.pm:419
#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "มีพาร์ติชั่นที่เป็นจุดเม้าท์ที่ %s เรียบร้อยแล้ว\n"
+msgid "Remove from RAID"
+msgstr "ลบออกจาก RAID"
-#: ../../security/help.pm:1
+#: diskdrake/interactive.pm:420
#, c-format
-msgid "Enable/Disable msec hourly security check."
-msgstr ""
+msgid "Remove from LVM"
+msgstr "ลบออกจาก LVM"
-#: ../../help.pm:1
+#: diskdrake/interactive.pm:421
#, c-format
-msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"%s\": this option will perform an automatic partitioning of your blank\n"
-"drive(s). If you use this option there will be no further prompts.\n"
-"\n"
-" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
-"your hard drive. If you want to use them, choose this option. You will then\n"
-"be asked to choose the mount points associated with each of the partitions.\n"
-"The legacy mount points are selected by default, and for the most part it's\n"
-"a good idea to keep them.\n"
-"\n"
-" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
-"all the space available on it, you will have to create free space for\n"
-"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
-"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
-"partition. Resizing can be performed without the loss of any data, provided\n"
-"you have previously defragmented the Windows partition and that it uses the\n"
-"FAT format. Backing up your data is strongly recommended.. Using this\n"
-"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
-"Windows on the same computer.\n"
-"\n"
-" Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"%s\": if you want to delete all data and all partitions present on\n"
-"your hard drive and replace them with your new Mandrake Linux system,\n"
-"choose this option. Be careful, because you will not be able to undo your\n"
-"choice after you confirm.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be deleted. !!\n"
-"\n"
-" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
-"partitioning everything from scratch. All data on your disk will be lost.\n"
-"\n"
-" !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"%s\": choose this option if you want to manually partition your hard\n"
-"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
-"easily lose all your data. That's why this option is really only\n"
-"recommended if you have done something like this before and have some\n"
-"experience. For more instructions on how to use the DiskDrake utility,\n"
-"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
-"Guide''."
-msgstr ""
+msgid "Modify RAID"
+msgstr "แก้ไข RAID"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Ukraine"
-msgstr "ยูเครน"
+#: diskdrake/interactive.pm:422
+#, c-format
+msgid "Use for loopback"
+msgstr "ใช้สำหรับ loopback"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+#: diskdrake/interactive.pm:462
+#, c-format
+msgid "Create a new partition"
+msgstr "สร้างพาร์ติชั่นใหม่"
-#: ../../network/isdn.pm:1
+#: diskdrake/interactive.pm:465
#, c-format
-msgid "External ISDN modem"
-msgstr "External ISDN modem"
+msgid "Start sector: "
+msgstr "เริ่มเซ็กเตอร์: "
-#: ../../security/help.pm:1
+#: diskdrake/interactive.pm:467 diskdrake/interactive.pm:876
#, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Size in MB: "
+msgstr "ขนาดเป็น MB: "
-#: ../../interactive/stdio.pm:1
+#: diskdrake/interactive.pm:468 diskdrake/interactive.pm:877
#, c-format
-msgid "Your choice? (default %s) "
-msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
+msgid "Filesystem type: "
+msgstr "ประเภทของระบบไฟล์: "
-#: ../../harddrake/sound.pm:1
+#: diskdrake/interactive.pm:473
#, c-format
-msgid "Trouble shooting"
-msgstr ""
+msgid "Preference: "
+msgstr "ข้อกำหนด: "
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:476
#, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
-"%s\n"
-"\n"
-msgstr ""
-"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
-"กรุณารอสักครู่\n"
-"สถานะการพิมพ์:\n"
-"%s\n"
-"\n"
-"มันทำงานถูกต้องใหมครับ"
+msgid "Logical volume name "
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:505
#, c-format
-msgid "daily"
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:535
#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Remove the loopback file?"
+msgstr "ฟอร์แมต loopback file %s"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Ireland"
-msgstr "ไอซ์แลนด์"
+#: diskdrake/interactive.pm:554
+#, c-format
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "การเปลี่ยนชนิดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Restore Configuration "
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+#: diskdrake/interactive.pm:565
+#, c-format
+msgid "Change partition type"
+msgstr "เปลี่ยนประเภทพาร์ติชั่น"
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "ถูกต้องหรือไม่?"
+#: diskdrake/interactive.pm:566 diskdrake/removable.pm:48
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr "คุณต้องการเลือก filesystem ใด"
-#: ../../help.pm:1
+#: diskdrake/interactive.pm:574
#, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"%s\".\n"
-"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
-"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
-"configure the network, or to do it later, in which case clicking the \"%s\"\n"
-"button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
+msgid "Switching from ext2 to ext3"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:603
#, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "คุณต้องการเม้าท์ loopback file %s ไว้ที่ใด?"
-#: ../../modules/interactive.pm:1
+#: diskdrake/interactive.pm:604
#, c-format
-msgid "Autoprobe"
-msgstr "ตรวจหาอัตโนมัติ"
+msgid "Where do you want to mount device %s?"
+msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
-#: ../../security/help.pm:1
+#: diskdrake/interactive.pm:609
#, c-format
msgid ""
-"if set to yes, check for :\n"
-"\n"
-"- empty passwords,\n"
-"\n"
-"- no password in /etc/shadow\n"
-"\n"
-"- for users with the 0 id other than root."
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
msgstr ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
+
+#: diskdrake/interactive.pm:634
+#, fuzzy, c-format
+msgid "Where do you want to mount %s?"
+msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:658 diskdrake/interactive.pm:738
+#: install_interactive.pm:156 install_interactive.pm:186
#, c-format
-msgid "Backup system files..."
-msgstr ""
+msgid "Resizing"
+msgstr "ปรับขนาด"
-#: ../../any.pm:1
+#: diskdrake/interactive.pm:658
#, c-format
-msgid "Can't use broadcast with no NIS domain"
-msgstr ""
+msgid "Computing FAT filesystem bounds"
+msgstr "คำนวณขอบเขตของระบบไฟล์"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "อ่าน CUPS drivers database..."
+#: diskdrake/interactive.pm:694
+#, c-format
+msgid "This partition is not resizeable"
+msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"
-#: ../../security/l10n.pm:1
+#: diskdrake/interactive.pm:699
#, c-format
-msgid "Shell history size"
-msgstr ""
+msgid "All data on this partition should be backed-up"
+msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นนี้ควรจะทำการสำรองไว้"
-#: ../../standalone/drakfloppy:1
+#: diskdrake/interactive.pm:701
#, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "หลังจากเปลี่ยนขนาดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะหายไป"
-#: ../../standalone/drakpxe:1
+#: diskdrake/interactive.pm:706
#, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Choose the new size"
+msgstr "เลือกขนาดใหม่"
-#: ../../printer/cups.pm:1 ../../standalone/printerdrake:1
+#: diskdrake/interactive.pm:707
#, fuzzy, c-format
-msgid "Configured on other machines"
-msgstr "ปรับแต่งการบริการต่างๆ"
+msgid "New size in MB: "
+msgstr "ขนาดเป็น MB: "
-#: ../../standalone/harddrake2:1
+#: diskdrake/interactive.pm:751 install_interactive.pm:194
#, c-format
-msgid "information level that can be obtained through the cpuid instruction"
+msgid ""
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
msgstr ""
-#: ../../lang.pm:1
+#: diskdrake/interactive.pm:775
#, c-format
-msgid "Peru"
-msgstr ""
+msgid "Which disk do you want to move it to?"
+msgstr "คุณต้องการจะย้ายไปดิสก์ไหน"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " on device: %s"
-msgstr "ดีไวซ์ของเม้าส์: %s\n"
+#: diskdrake/interactive.pm:776
+#, c-format
+msgid "Sector"
+msgstr "เซ็กเตอร์"
-#: ../../install_interactive.pm:1
+#: diskdrake/interactive.pm:777
#, c-format
-msgid "Remove Windows(TM)"
-msgstr "ลบ Windows(TM)"
+msgid "Which sector do you want to move it to?"
+msgstr "คุณต้องการย้ายไปเซ็กเตอร์ไหน"
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "เริ่มและหยุด X Font Server ตอน boot และ เลิก"
+#: diskdrake/interactive.pm:780
+#, c-format
+msgid "Moving"
+msgstr "ย้าย"
-#: ../../standalone/drakTermServ:1
+#: diskdrake/interactive.pm:780
#, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
-msgstr ""
+msgid "Moving partition..."
+msgstr "ย้ายพาร์ติชั่น..."
-#: ../../standalone/drakfont:1
+#: diskdrake/interactive.pm:802
#, c-format
-msgid "Select the font file or directory and click on 'Add'"
-msgstr ""
+msgid "Choose an existing RAID to add to"
+msgstr "เลือก RAID เพื่อเพิ่มเข้าไป"
-#: ../../lang.pm:1
+#: diskdrake/interactive.pm:803 diskdrake/interactive.pm:820
#, c-format
-msgid "Madagascar"
-msgstr ""
+msgid "new"
+msgstr "ใหม่"
-#: ../../standalone/drakbug:1
+#: diskdrake/interactive.pm:818
#, c-format
-msgid "Urpmi"
-msgstr ""
+msgid "Choose an existing LVM to add to"
+msgstr "เลือก LVM ที่มีอยู่เพื่อเพิ่มเข้าไป"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:824
#, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "LVM name?"
+msgstr "ชื่อ LVM"
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "System"
-msgstr "System mode"
+#: diskdrake/interactive.pm:861
+#, c-format
+msgid "This partition can't be used for loopback"
+msgstr "พาร์ติชั่นนี้ไม่สามารถใช้กับ loopback"
-#: ../../any.pm:1 ../../help.pm:1
-#, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "คุณต้องการใช้ aboot หรือไม่"
+#: diskdrake/interactive.pm:874
+#, c-format
+msgid "Loopback"
+msgstr "Loopback"
-#: ../../keyboard.pm:1
+#: diskdrake/interactive.pm:875
#, c-format
-msgid "Arabic"
-msgstr ""
+msgid "Loopback file name: "
+msgstr "ชื่อ Loopback file: "
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:880
#, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "/Options/ทดลอง"
+msgid "Give a file name"
+msgstr "ชื่อเต็ม"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:883
#, fuzzy, c-format
-msgid "Password required"
-msgstr "รหัสผ่าน"
+msgid "File is already used by another loopback, choose another one"
+msgstr "File already used by another loopback, choose another one"
-#: ../../common.pm:1
+#: diskdrake/interactive.pm:884
#, c-format
-msgid "%d minutes"
-msgstr "%d นาที"
+msgid "File already exists. Use it?"
+msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Graphics card: %s"
-msgstr "กราฟฟิคการ์ด: %s"
+#: diskdrake/interactive.pm:907
+#, fuzzy, c-format
+msgid "Mount options"
+msgstr "อ๊อปชั่นของโมดูล:"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:914
#, c-format
-msgid "WebDAV transfer failed!"
+msgid "Various"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: diskdrake/interactive.pm:978
#, c-format
-msgid "XFree configuration"
-msgstr "การคอนฟิก XFree"
+msgid "device"
+msgstr "อุปกรณ์"
-#: ../../diskdrake/hd_gtk.pm:1
+#: diskdrake/interactive.pm:979
#, c-format
-msgid "Choose action"
-msgstr "เลือกกิจกรรม"
+msgid "level"
+msgstr "ระดับ"
-#: ../../lang.pm:1
+#: diskdrake/interactive.pm:980
#, c-format
-msgid "French Polynesia"
-msgstr ""
+msgid "chunk size"
+msgstr "ขนาดของ chunk"
-#: ../../help.pm:1
+#: diskdrake/interactive.pm:996
#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the list provided.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
-"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
-"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
-"buttons and check that the mouse pointer moves on-screen as you move your\n"
-"mouse."
-msgstr ""
+msgid "Be careful: this operation is dangerous."
+msgstr "ระวัง การทำงานนี้อันตราย"
-#: ../../services.pm:1
+#: diskdrake/interactive.pm:1011
#, c-format
-msgid "Support the OKI 4w and compatible winprinters."
-msgstr ""
+msgid "What type of partitioning?"
+msgstr "การทำ partitioning ชนิดใด?"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Files or wildcards listed in a .backupignore file at the top of a directory "
-"tree will not be backed up."
+#: diskdrake/interactive.pm:1027
+#, fuzzy, c-format
+msgid "The package %s is needed. Install it?"
msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-#: ../../services.pm:1
+#: diskdrake/interactive.pm:1056
#, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
-msgstr ""
+msgid "You'll need to reboot before the modification can take place"
+msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: diskdrake/interactive.pm:1065
#, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "ตารางพาร์ติชั่นของไดรฟ์ %s จะถูกบันทึกลงไปในดิสก์"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:1078
#, c-format
-msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
-msgstr ""
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "หลังจาก format พาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
-#: ../../standalone/drakTermServ:1
+#: diskdrake/interactive.pm:1095
#, fuzzy, c-format
-msgid "Enable Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid "Move files to the new partition"
+msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Ukrainian"
-msgstr "ยูเครน"
+#: diskdrake/interactive.pm:1095
+#, fuzzy, c-format
+msgid "Hide files"
+msgstr "mkraid failed"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:1096
#, c-format
msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+"Directory %s already contains data\n"
+"(%s)"
msgstr ""
-#: ../../standalone/drakperm:1
+#: diskdrake/interactive.pm:1107
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
+
+#: diskdrake/interactive.pm:1111
#, c-format
-msgid "Enable \"%s\" to write the file"
+msgid "Copying %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: diskdrake/interactive.pm:1115
#, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+msgid "Removing %s"
+msgstr "ความละเอียดของภาพ %s\n"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+#: diskdrake/interactive.pm:1129
+#, c-format
+msgid "partition %s is now known as %s"
+msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid "Remove Windows"
-msgstr "ลบ Windows(TM)"
+#: diskdrake/interactive.pm:1150 diskdrake/interactive.pm:1210
+#, c-format
+msgid "Device: "
+msgstr "อุปกรณ์: "
-#: ../../standalone/scannerdrake:1
+#: diskdrake/interactive.pm:1151
#, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
-msgstr ""
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "อักษรไดรว์แบบดอส: %s (เป็นการคาดเดา)\n"
-#: ../../harddrake/data.pm:1
+#: diskdrake/interactive.pm:1155 diskdrake/interactive.pm:1163
+#: diskdrake/interactive.pm:1229
#, c-format
-msgid "Firewire controllers"
-msgstr ""
+msgid "Type: "
+msgstr "ประเภท: "
-#: ../../help.pm:1
+#: diskdrake/interactive.pm:1159 install_steps_gtk.pm:339
#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
-"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
-"changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
+msgid "Name: "
+msgstr "ชื่อ: "
-#: ../../standalone/drakboot:1
+#: diskdrake/interactive.pm:1167
#, c-format
-msgid "System mode"
-msgstr "System mode"
+msgid "Start: sector %s\n"
+msgstr "เริ่มต้น: เซ็กเตอร์ %s\n"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ในระบบเน็ตแวร์ คุณจะต้องป้อนข้อมูล\n"
-"ของชื่อพรินต์เซิร์ฟเวอร์ในระบบเน็ตแวร์ (ชื่อที่ป้อนเข้าไปอาจไม่ใช่ชื่อของ\n"
-"โฮสต์แบบ TCP/IP) และข้อมูลชื่อคิวของเครื่องพิมพ์ที่ต้องการใช้\n"
-"รวมทั้งชื่อผู้ใช้และรหัสผ่านด้วย"
+#: diskdrake/interactive.pm:1168
+#, c-format
+msgid "Size: %s"
+msgstr "ขนาด: %s"
+
+#: diskdrake/interactive.pm:1170
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s เซ็กเตอร์"
-#: ../../standalone/drakTermServ:1
+#: diskdrake/interactive.pm:1172
#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "เน็ตมาสก์"
+msgid "Cylinder %d to %d\n"
+msgstr "ไซลินเดอร์ %d เป็น ไซลินเดอร์ %d\n"
-#: ../../network/adsl.pm:1
+#: diskdrake/interactive.pm:1173
#, c-format
-msgid "Do it later"
+msgid "Number of logical extents: %d"
msgstr ""
-#: ../../any.pm:1
+#: diskdrake/interactive.pm:1174
#, c-format
-msgid "Append"
-msgstr "Append"
+msgid "Formatted\n"
+msgstr "ฟอร์แมต\n"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:1175
#, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
+msgid "Not formatted\n"
+msgstr "ยังไม่ได้ฟอร์แมต\n"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:1176
#, c-format
-msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
-"\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
-msgstr ""
+msgid "Mounted\n"
+msgstr "เม้าท์\n"
-#: ../../install_steps_interactive.pm:1
+#: diskdrake/interactive.pm:1177
#, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
-msgstr ""
-"การติดตั้งแบบออโตเมติกสามารถทำงานแบบเต็มรูปแบบหากต้องการ\n"
-"ในกรณีนั้นมันจะใช้ harddisk ทั้งหมด\n"
-"(มันเหมาะกับการติดตั้งบนเครื่องอื่น)\n"
-"คุณอาจอยากกลับไปเริ่มต้นติดตั้งใหม่\n"
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:1179
#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
+msgid ""
+"Loopback file(s):\n"
+" %s\n"
+msgstr "Loopback file(s): %s\n"
-#: ../../standalone/drakgw:1
+#: diskdrake/interactive.pm:1180
#, c-format
msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "กรุณาเลือก network adapter ที่จะใช้กับระบบ LAN"
+"Partition booted by default\n"
+" (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"พาร์ติชั่นที่กำหนดให้บูตซึ่งกำหนดไว้แล้ว\n"
+" (สำหรับบูตของ MS-DOS ไม่ใช่ lilo)\n"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:1182
#, c-format
-msgid "OK to restore the other files."
-msgstr ""
+msgid "Level %s\n"
+msgstr "ระดับ %s\n"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
+#: diskdrake/interactive.pm:1183
+#, c-format
+msgid "Chunk size %s\n"
+msgstr "ขนาดของ Chunk %s\n"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:1184
#, c-format
-msgid "Printer Device URI"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+msgid "RAID-disks %s\n"
+msgstr "ดิสก์แบบ RAID %s\n"
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:1186
#, c-format
-msgid "Not erasable media!"
+msgid "Loopback file name: %s"
+msgstr "Loopback file name: %s"
+
+#: diskdrake/interactive.pm:1189
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
msgstr ""
+"\n"
+"มีความเป็นไปได้ที่พาร์ติชั่นนี้\n"
+"เป็นพาร์ติชั่นของไดรเวอร์ คุณควรที่จะ\n"
+"ปล่อยมันทิ้งไว้แบบนี้\n"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: diskdrake/interactive.pm:1192
#, c-format
-msgid "Terminal-based"
-msgstr "รูปแบบเทอร์มินอล"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
+msgstr ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
-#: ../../security/help.pm:1
+#: diskdrake/interactive.pm:1211
#, c-format
-msgid "Enable/Disable IP spoofing protection."
+msgid "Read-only"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:1212
#, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
+msgid "Size: %s\n"
+msgstr "ขนาด: %s\n"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
+#: diskdrake/interactive.pm:1213
+#, c-format
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "ข้อมูลทางกายภาพ: %s ไซลินเดอร์, %s หัวอ่าน, %s เซ้กเตอร์\n"
-#: ../../any.pm:1
+#: diskdrake/interactive.pm:1214
#, c-format
-msgid "Other OS (windows...)"
-msgstr "ระบบปฏิบัติการอื่นๆ (วินโดวส์...)"
+msgid "Info: "
+msgstr "ข้อมูล: "
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:1215
#, c-format
-msgid "WebDAV remote site already in sync!"
-msgstr ""
+msgid "LVM-disks %s\n"
+msgstr "LVM-disks %s\n"
-#: ../../printer/printerdrake.pm:1
+#: diskdrake/interactive.pm:1216
+#, c-format
+msgid "Partition table type: %s\n"
+msgstr "ชนิดตารางพาร์ติชั่น: %s\n"
+
+#: diskdrake/interactive.pm:1217
#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "อ่าน CUPS drivers database..."
+msgid "on channel %d id %d\n"
+msgstr "บนบัส %d id %d\n"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"
+#: diskdrake/interactive.pm:1250
+#, fuzzy, c-format
+msgid "Filesystem encryption key"
+msgstr "ประเภทของระบบไฟล์: "
-#: ../../standalone/drakbackup:1
+#: diskdrake/interactive.pm:1251
#, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "Choose your filesystem encryption key"
msgstr ""
-#: ../../lang.pm:1
+#: diskdrake/interactive.pm:1254
#, fuzzy, c-format
-msgid "Somalia"
-msgstr "โดเมน NIS"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No open source driver"
-msgstr ""
+#: diskdrake/interactive.pm:1255
+#, fuzzy, c-format
+msgid "The encryption keys do not match"
+msgstr "รหัสผ่านไม่เหมือนกัน"
-#: ../../standalone/printerdrake:1
+#: diskdrake/interactive.pm:1258 network/netconnect.pm:889
+#: standalone/drakconnect:370
#, c-format
-msgid "Def."
+msgid "Encryption key"
msgstr ""
-#: ../../security/level.pm:1
+#: diskdrake/interactive.pm:1259
#, c-format
-msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+msgid "Encryption key (again)"
msgstr ""
-#: ../../lang.pm:1
+#: diskdrake/removable.pm:47
+#, fuzzy, c-format
+msgid "Change type"
+msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+
+#: diskdrake/smbnfs_gtk.pm:163
#, c-format
-msgid "Nicaragua"
+msgid "Can't login using username %s (bad password?)"
msgstr ""
-#: ../../lang.pm:1
+#: diskdrake/smbnfs_gtk.pm:167 diskdrake/smbnfs_gtk.pm:176
#, fuzzy, c-format
-msgid "New Caledonia"
-msgstr "Macedonian"
+msgid "Domain Authentication Required"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../../network/isdn.pm:1
+#: diskdrake/smbnfs_gtk.pm:168
#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "ยุโรป (EDS11)"
+msgid "Which username"
+msgstr "ชื่อผู้ใช้"
-#: ../../standalone/printerdrake:1
+#: diskdrake/smbnfs_gtk.pm:168
#, fuzzy, c-format
-msgid "/_Delete"
-msgstr "ลบ"
+msgid "Another one"
+msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
-#: ../../any.pm:1
+#: diskdrake/smbnfs_gtk.pm:177
#, c-format
-msgid "Video mode"
-msgstr "โหมดของการแสดงผล"
+msgid ""
+"Please enter your username, password and domain name to access this host."
+msgstr ""
-#: ../../lang.pm:1
+#: diskdrake/smbnfs_gtk.pm:179 standalone/drakbackup:3874
#, fuzzy, c-format
-msgid "Oman"
-msgstr "โดเมน NIS"
+msgid "Username"
+msgstr "ชื่อผู้ใช้"
-#: ../../standalone/logdrake:1
+#: diskdrake/smbnfs_gtk.pm:181
#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "โปรดลองอีกครั้ง"
+msgid "Domain"
+msgstr "โดเมน NIS"
-#: ../../standalone/net_monitor:1
+#: diskdrake/smbnfs_gtk.pm:205
#, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+msgid "Search servers"
+msgstr "เซิร์ฟเวอร์ DNS"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "SunOS"
-msgstr "SunOS"
+#: diskdrake/smbnfs_gtk.pm:210
+#, fuzzy, c-format
+msgid "Search new servers"
+msgstr "เซิร์ฟเวอร์ DNS"
-#: ../../diskdrake/interactive.pm:1
+#: do_pkgs.pm:21
#, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "ขนาดเป็น MB: "
+msgid "The package %s needs to be installed. Do you want to install it?"
+msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-#: ../../diskdrake/interactive.pm:1
+#: do_pkgs.pm:26
#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ชนิดตารางพาร์ติชั่น: %s\n"
+msgid "Mandatory package %s is missing"
+msgstr ""
-#: ../../any.pm:1
+#: do_pkgs.pm:136
#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+msgid "Installing packages..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-#: ../../keyboard.pm:1
+#: do_pkgs.pm:210
+#, fuzzy, c-format
+msgid "Removing packages..."
+msgstr "ความละเอียดของภาพ %s\n"
+
+#: fs.pm:399
#, c-format
-msgid "US keyboard"
-msgstr "อเมริกา"
+msgid ""
+"Do not update inode access times on this file system\n"
+"(e.g, for faster access on the news spool to speed up news servers)."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: fs.pm:402
#, c-format
-msgid "Buttons emulation"
+msgid ""
+"Can only be mounted explicitly (i.e.,\n"
+"the -a option will not cause the file system to be mounted)."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: fs.pm:405
#, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Do not interpret character or block special devices on the file system."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: fs.pm:407
#, c-format
msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+"Do not allow execution of any binaries on the mounted\n"
+"file system. This option might be useful for a server that has file systems\n"
+"containing binaries for architectures other than its own."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: fs.pm:411
#, c-format
msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
+"Do not allow set-user-identifier or set-group-identifier\n"
+"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
+"have suidperl(1) installed.)"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "บันทึกลงไฟล์"
+#: fs.pm:415
+#, c-format
+msgid "Mount the file system read-only."
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: fs.pm:417
+#, c-format
+msgid "All I/O to the file system should be done synchronously."
+msgstr ""
+
+#: fs.pm:421
#, c-format
msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
-"\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
-"\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
-"\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
-"\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"Allow an ordinary user to mount the file system. The\n"
+"name of the mounting user is written to mtab so that he can unmount the "
+"file\n"
+"system again. This option implies the options noexec, nosuid, and nodev\n"
+"(unless overridden by subsequent options, as in the option line\n"
+"user,exec,dev,suid )."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: fs.pm:429
#, c-format
-msgid "Halt bug"
+msgid "Give write access to ordinary users"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "การปรับแต่ง LAN"
+#: fs.pm:565 fs.pm:575 fs.pm:579 fs.pm:583 fs.pm:587 fs.pm:591 swap.pm:12
+#, c-format
+msgid "%s formatting of %s failed"
+msgstr "กำลังฟอร์แมต %s ของ %s ที่มีปัญหา"
-#: ../../lang.pm:1
+#: fs.pm:628
#, c-format
-msgid "Tokelau"
-msgstr ""
+msgid "I don't know how to format %s in type %s"
+msgstr "ไม่ทราบว่าจะฟอร์แมต %s เป็นชนิด %s ได้อย่างไร"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Matching"
-msgstr "matching"
+#: fs.pm:635 fs.pm:642
+#, c-format
+msgid "Formatting partition %s"
+msgstr "ฟอร์แมตพาร์ติชั่น %s"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estonian"
+#: fs.pm:639
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "กำลังสร้างและ format ไฟล์ %s"
-#: ../../standalone/drakbug:1
+#: fs.pm:705 fs.pm:758
#, fuzzy, c-format
-msgid "Release: "
-msgstr "โปรดรอสักครู่"
+msgid "Mounting partition %s"
+msgstr "ฟอร์แมตพาร์ติชั่น %s"
+
+#: fs.pm:706 fs.pm:759
+#, c-format
+msgid "mounting partition %s in directory %s failed"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: fs.pm:726 fs.pm:734
#, fuzzy, c-format
-msgid "Connection speed"
-msgstr "ชนิดการเชื่อมต่อ"
+msgid "Checking %s"
+msgstr "ความละเอียดของภาพ %s\n"
-#: ../../lang.pm:1
+#: fs.pm:775 partition_table.pm:636
#, c-format
-msgid "Namibia"
-msgstr ""
+msgid "error unmounting %s: %s"
+msgstr "ผิดพลาดยกเลิกการเม้าท์ %s: %s"
-#: ../../services.pm:1
+#: fs.pm:807
#, fuzzy, c-format
-msgid "Database Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid "Enabling swap partition %s"
+msgstr "ฟอร์แมตพาร์ติชั่น %s"
-#: ../../standalone/harddrake2:1
+#: fsedit.pm:21
#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
+msgid "simple"
+msgstr "ง่าย"
+
+#: fsedit.pm:25
+#, c-format
+msgid "with /usr"
msgstr ""
-#: ../../raid.pm:1
+#: fsedit.pm:30
#, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "ไม่สามารถเพิ่มพาร์ติชั่นเป็น _formatted_ RAID md%d"
+msgid "server"
+msgstr "เซิร์ฟเวอร์"
-#: ../../standalone/drakclock:1
+#: fsedit.pm:254
#, fuzzy, c-format
-msgid "Network Time Protocol"
-msgstr "Network interface"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to lose all the partitions?\n"
msgstr ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "กำลังเตรียมการติดตั้ง"
+"ผมไม่สามารถอ่านตารางพาร์ติชั่นได้ มันเสียหายมากเกินไป \n"
+"ผมสามารถพยายามลบข้อมูลข้อมูลในพาร์ติชั่นที่เสียหาย\n"
+"อีกทางเลือกคือไม่ให้ DrakX ทำการเปลี่ยนแปลงตาราง\n"
+"ข้อความผิดพลาดคือ %s\n"
+"\n"
+"คุณแน่ใจว่าจะยอมให้พาร์ติชั่นทั้งหมดถูกลบไป\n"
-#: ../../harddrake/v4l.pm:1
+#: fsedit.pm:514
#, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
-msgstr ""
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "คุณไม่สามารถใช้ JFS สำหรับพาร์ติชั่นที่น้อยกว่า 16MB ได้"
-#: ../../standalone/drakboot:1
+#: fsedit.pm:515
#, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "รัน X-Window เมื่อเริ่มทำงาน"
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "คุณไม่สามารถใช้ ReiserFS สำหรับพาร์ติชั่นที่น้อยกว่า 32MB ได้"
-#: ../../standalone/drakbackup:1
+#: fsedit.pm:534
#, c-format
-msgid "hourly"
-msgstr ""
+msgid "Mount points must begin with a leading /"
+msgstr "จุดเม้าท์จะต้องเริ่มด้วย /"
-#: ../../keyboard.pm:1
+#: fsedit.pm:535
#, c-format
-msgid "Right Shift key"
+msgid "Mount points should contain only alphanumerical characters"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: fsedit.pm:536
#, c-format
-msgid " Successfuly Restored on %s "
-msgstr ""
+msgid "There is already a partition with mount point %s\n"
+msgstr "มีพาร์ติชั่นที่เป็นจุดเม้าท์ที่ %s เรียบร้อยแล้ว\n"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Making printer port available for CUPS..."
+#: fsedit.pm:538
+#, fuzzy, c-format
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
msgstr ""
+"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
+"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
+"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"
-#: ../../lang.pm:1
+#: fsedit.pm:541
#, c-format
-msgid "Antigua and Barbuda"
-msgstr ""
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
-#: ../../standalone/drakTermServ:1
+#: fsedit.pm:543
#, c-format
msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"You may not be able to install lilo (since lilo doesn't handle a LV on "
+"multiple PVs)"
msgstr ""
-#: ../../keyboard.pm:1
+#: fsedit.pm:546 fsedit.pm:548
#, c-format
-msgid "Spanish"
-msgstr "สเปน"
+msgid "This directory should remain within the root filesystem"
+msgstr "This directory should remain within the root filesystem"
-#: ../../services.pm:1
+#: fsedit.pm:550
#, fuzzy, c-format
-msgid "Start"
-msgstr "สถานะ:"
+msgid ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-#: ../../security/l10n.pm:1
-#, c-format
-msgid "Direct root login"
-msgstr ""
+#: fsedit.pm:552
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
-#: ../../printer/printerdrake.pm:1
+#: fsedit.pm:613
#, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "การคอนฟิกเครื่องพิมพ์"
+msgid "Not enough free space for auto-allocating"
+msgstr "ไม่มีพื้นที่เพียงพอสำหรับการแบ่งสัดส่วนพาร์ติชั่นแบบออโต้"
-#: ../../printer/printerdrake.pm:1
+#: fsedit.pm:615
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected. Also your network printer(s) and your Windows "
-"machines must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Nothing to do"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: fsedit.pm:711
#, c-format
-msgid "Normal modem connection"
-msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
+msgid "Error opening %s for writing: %s"
+msgstr "เกิดข้อผิดพลาดในการเปิด %s สำหรับการเขียน: %s"
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: harddrake/data.pm:53
#, fuzzy, c-format
-msgid "File Selection"
-msgstr "เลือกกลุ่มแพ็คเก็จ"
+msgid "Floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
-#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: harddrake/data.pm:54
#, c-format
-msgid "CUPS"
+msgid "Zip"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: harddrake/data.pm:55
#, fuzzy, c-format
-msgid "Erase tape before backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Disk"
+msgstr "เดนมาร์ก"
-#: ../../standalone/harddrake2:1
+#: harddrake/data.pm:56
#, c-format
-msgid "Run config tool"
+msgid "CDROM"
msgstr ""
-#: ../../any.pm:1
+#: harddrake/data.pm:57
#, c-format
-msgid "Bootloader installation"
-msgstr "การติดตั้ง Bootloader"
+msgid "CD/DVD burners"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: harddrake/data.pm:58
#, c-format
-msgid "Root partition size in MB: "
-msgstr "ขนาดของพาร์ติชั่นรูท MB:"
+msgid "DVD-ROM"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "นี่คือแพกเกจที่ต้องติดตั้ง ไม่สามารถไม่เลือก"
+#: harddrake/data.pm:59 standalone/drakbackup:2409
+#, fuzzy, c-format
+msgid "Tape"
+msgstr "ประเภท"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Create etherboot floppies/CDs:\n"
-" \tThe diskless client machines need either ROM images on the NIC, or "
-"a boot floppy\n"
-" \tor CD to initate the boot sequence. drakTermServ will help "
-"generate these\n"
-" \timages, based on the NIC in the client machine.\n"
-" \t\t\n"
-" \tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-" \t\t\n"
-" \tcat /usr/lib/etherboot/boot1a.bin \\\n"
-" \t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
-msgstr ""
+#: harddrake/data.pm:60
+#, fuzzy, c-format
+msgid "Videocard"
+msgstr "โหมดของการแสดงผล"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Etherboot ISO image is %s"
-msgstr ""
+#: harddrake/data.pm:61
+#, fuzzy, c-format
+msgid "Tvcard"
+msgstr "TV card"
-#: ../../services.pm:1
+#: harddrake/data.pm:62
#, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
-msgstr ""
-"named (BIND) คือ Domain Name Server (DNS) ทำหน้าที่แปลงชื่อ\n"
-"host names เป็น IP addresses."
+msgid "Other MultiMedia devices"
+msgstr "อื่นๆ"
-#: ../../lang.pm:1
+#: harddrake/data.pm:63
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Sound card"
+
+#: harddrake/data.pm:64
#, c-format
-msgid "Saint Lucia"
+msgid "Webcam"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: harddrake/data.pm:68
#, c-format
-msgid "November"
-msgstr "พฤศจิกายน"
+msgid "Processors"
+msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "ยกเลิกติดต่อ..."
+#: harddrake/data.pm:69
+#, fuzzy, c-format
+msgid "ISDN adapters"
+msgstr "Internal ISDN card"
-#: ../../standalone/drakbug:1
+#: harddrake/data.pm:71
#, fuzzy, c-format
-msgid "Report"
-msgstr "Port"
+msgid "Ethernetcard"
+msgstr "Ethernet Card"
-#: ../../lang.pm:1
-#, c-format
-msgid "Palau"
-msgstr ""
+#: harddrake/data.pm:79 network/netconnect.pm:366 standalone/drakconnect:277
+#: standalone/drakconnect:447 standalone/drakconnect:448
+#: standalone/drakconnect:540
+#, fuzzy, c-format
+msgid "Modem"
+msgstr "Mouse"
-#: ../../diskdrake/interactive.pm:1
+#: harddrake/data.pm:80
#, c-format
-msgid "level"
-msgstr "ระดับ"
+msgid "ADSL adapters"
+msgstr ""
-#: ../advertising/13-mdkexpert_corporate.pl:1
+#: harddrake/data.pm:82
#, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
+msgid "Bridges and system controllers"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: harddrake/data.pm:83 help.pm:203 help.pm:991
+#: install_steps_interactive.pm:935 printer/printerdrake.pm:680
+#: printer/printerdrake.pm:3970
#, c-format
-msgid "Package Group Selection"
-msgstr "เลือกกลุ่มแพ็คเก็จ"
+msgid "Printer"
+msgstr "เครื่องพิมพ์"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid ""
-"Allow local hardware\n"
-"configuration."
-msgstr "Boot Style Configuration"
+#: harddrake/data.pm:85 help.pm:991 install_steps_interactive.pm:928
+#, c-format
+msgid "Mouse"
+msgstr "Mouse"
-#: ../../standalone/drakbackup:1
+#: harddrake/data.pm:90
#, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "Joystick"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: harddrake/data.pm:92
#, c-format
-msgid "You can configure each parameter of the module here."
+msgid "(E)IDE/ATA controllers"
msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: harddrake/data.pm:93
#, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "เลือกขนาดจอภาพและความละเอียดสี"
+msgid "Firewire controllers"
+msgstr ""
-#: ../../standalone/mousedrake:1
+#: harddrake/data.pm:94
#, c-format
-msgid "Emulate third button?"
-msgstr "ต้องการจำลองเม้าส์ปุ่มที่สามด้วยหรือไม่?"
+msgid "SCSI controllers"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: harddrake/data.pm:95
#, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+msgid "USB controllers"
msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: harddrake/data.pm:96
#, c-format
-msgid "Mount"
-msgstr "เม้าท์"
+msgid "SMBus controllers"
+msgstr ""
-#: ../../standalone/drakautoinst:1
+#: harddrake/data.pm:97
#, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
+msgid "Scanner"
+msgstr "เลือกกราฟฟิคการ์ด"
-#: ../../steps.pm:1
+#: harddrake/data.pm:99 standalone/harddrake2:315
#, fuzzy, c-format
-msgid "Install updates"
-msgstr "ติดตั้งระบบ"
+msgid "Unknown/Others"
+msgstr "Generic"
-#: ../../standalone/draksplash:1
+#: harddrake/data.pm:113
#, c-format
-msgid "text box height"
+msgid "cpu # "
msgstr ""
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "State"
-msgstr "สถานะ:"
-
-#: ../../standalone/drakfloppy:1
+#: harddrake/sound.pm:150 standalone/drakconnect:166
#, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "ตรวจให้แน่ใจว่ามีอุปกรณ์อยู่ใน%s"
+msgid "Please Wait... Applying the configuration"
+msgstr "กรุณารอสักครู่ ..."
-#: ../../any.pm:1
+#: harddrake/sound.pm:182
#, c-format
-msgid "Enable multiple profiles"
-msgstr "Enable multiple profiles"
+msgid "No alternative driver"
+msgstr ""
-#: ../../fs.pm:1
+#: harddrake/sound.pm:183
#, c-format
-msgid "Do not interpret character or block special devices on the file system."
+msgid ""
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
msgstr ""
-#: ../../standalone/drakbackup:1
+#: harddrake/sound.pm:189
+#, fuzzy, c-format
+msgid "Sound configuration"
+msgstr "การปรับแต่ง LAN"
+
+#: harddrake/sound.pm:191
#, c-format
msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
msgstr ""
-#: ../../printer/main.pm:1
+#: harddrake/sound.pm:193
#, c-format
-msgid "Local printer"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid ""
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: harddrake/sound.pm:195
#, c-format
-msgid "Files Restored..."
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independent "
+"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
+"and limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: harddrake/sound.pm:209 harddrake/sound.pm:289
#, fuzzy, c-format
-msgid "Package selection"
-msgstr "เลือกกลุ่มแพ็คเก็จ"
+msgid "Driver:"
+msgstr "Driver"
-#: ../../lang.pm:1
+#: harddrake/sound.pm:214
#, c-format
-msgid "Mauritania"
+msgid "Trouble shooting"
msgstr ""
-#: ../../standalone/drakgw:1
+#: harddrake/sound.pm:222
#, c-format
msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
+"The old \"%s\" driver is blacklisted.\n"
"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
+"It has been reported to oops the kernel on unloading.\n"
"\n"
+"The new \"%s\" driver'll only be used on next bootstrap."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: harddrake/sound.pm:230
+#, c-format
+msgid "No open source driver"
+msgstr ""
+
+#: harddrake/sound.pm:231
#, c-format
msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: harddrake/sound.pm:234
#, c-format
-msgid "All primary partitions are used"
-msgstr "พาร์ติชั่นแบบ primary ถูกใช้ทั้งหมดแล้ว"
+msgid "No known driver"
+msgstr ""
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "LPD server \"%s\", printer \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+#: harddrake/sound.pm:235
+#, c-format
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: harddrake/sound.pm:239
+#, c-format
+msgid "Unknown driver"
+msgstr ""
+
+#: harddrake/sound.pm:240
+#, c-format
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
+
+#: harddrake/sound.pm:253
+#, c-format
+msgid "Sound trouble shooting"
+msgstr ""
+
+#: harddrake/sound.pm:254
#, c-format
msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
msgstr ""
-"เมื่อทุกอย่างเสร็จสิ้น ผมแนะนำให้ท่านเริ่มทำงาน X windows ใหม่\n"
-"เพื่อป้องกันปัญหา hostname ที่อาจเกิดขึ้นได้"
-#: ../../services.pm:1
+#: harddrake/sound.pm:280
#, c-format
-msgid "Automatic detection and configuration of hardware at boot."
+msgid "Let me pick any driver"
msgstr ""
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "การปรับแต่ง LAN"
+#: harddrake/sound.pm:283
+#, c-format
+msgid "Choosing an arbitrary driver"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: harddrake/sound.pm:284
#, c-format
-msgid "Configuring IDE"
-msgstr "คอนฟิก IDE"
+msgid ""
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: harddrake/v4l.pm:14 harddrake/v4l.pm:66
#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "ไม่มีการคอนฟิกจอภาพ"
+msgid "Auto-detect"
+msgstr "ใช้ auto detection"
-#: ../../standalone/harddrake2:1
+#: harddrake/v4l.pm:67 harddrake/v4l.pm:219
#, fuzzy, c-format
-msgid "Configure module"
-msgstr "คอนฟิกเม้าส์"
+msgid "Unknown|Generic"
+msgstr "Generic"
-#: ../../lang.pm:1
+#: harddrake/v4l.pm:100
#, c-format
-msgid "Cocos (Keeling) Islands"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: harddrake/v4l.pm:101
#, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: harddrake/v4l.pm:245
#, c-format
-msgid "Provider phone number"
-msgstr "หมายเลขโทรศัพท์"
-
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Host %s"
-msgstr "ชื่อโฮสต์:"
+msgid ""
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
+msgstr ""
-#: ../../lang.pm:1
+#: harddrake/v4l.pm:248
#, fuzzy, c-format
-msgid "Fiji"
-msgstr "ฟินแลนด์"
+msgid "Card model:"
+msgstr "Card mem (DMA)"
-#: ../../lang.pm:1
+#: harddrake/v4l.pm:249
#, fuzzy, c-format
-msgid "Armenia"
-msgstr "อาร์เมเนียน (เก่า)"
+msgid "Tuner type:"
+msgstr "เปลี่ยนประเภทพาร์ติชั่น"
-#: ../../any.pm:1
+#: harddrake/v4l.pm:250
#, c-format
-msgid "Second floppy drive"
-msgstr "Floppy Drive เครื่องที่สอง"
+msgid "Number of capture buffers:"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: harddrake/v4l.pm:250
#, c-format
-msgid "About Harddrake"
+msgid "number of capture buffers for mmap'ed capture"
msgstr ""
-#: ../../security/l10n.pm:1
+#: harddrake/v4l.pm:252
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "ฟอร์แมต"
+
+#: harddrake/v4l.pm:253
#, c-format
-msgid "Authorize TCP connections to X Window"
+msgid "Radio support:"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: harddrake/v4l.pm:253
#, c-format
-msgid "Drive capacity"
+msgid "enable radio support"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: help.pm:11
#, c-format
msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, clicking on the \"%s\" button\n"
+"will reboot your computer."
msgstr ""
-"กรุณาใส่แผ่นฟล้อปปี้ในไดรว์\n"
-"ข้อมูลทั้งหมดบนแผ่นฟล้อปปี้จะถูกลบ"
-#: ../../diskdrake/interactive.pm:1
+#: help.pm:14 install_steps_gtk.pm:596 install_steps_interactive.pm:88
+#: install_steps_interactive.pm:697 standalone/drakautoinst:199
#, c-format
-msgid "Size: %s"
-msgstr "ขนาด: %s"
+msgid "Accept"
+msgstr "ยอมรับ"
-#: ../../keyboard.pm:1
+#: help.pm:17
#, c-format
-msgid "Control and Shift keys simultaneously"
+msgid ""
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the user name. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user who\n"
+"can automatically log into the system when the computer boots up. If you\n"
+"are interested in that feature (and do not care much about local security),\n"
+"choose the desired user and window manager, then click \"%s\". If you are\n"
+"not interested in this feature, uncheck the \"%s\" box."
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d วินาที"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-
-#: ../../security/help.pm:1
+#: help.pm:52 help.pm:197 help.pm:444 help.pm:691 help.pm:784 help.pm:1005
+#: install_steps_gtk.pm:275 interactive.pm:403 interactive/newt.pm:308
+#: network/netconnect.pm:242 network/tools.pm:208 printer/printerdrake.pm:2922
+#: standalone/drakTermServ:392 standalone/drakbackup:4487
+#: standalone/drakbackup:4513 standalone/drakbackup:4543
+#: standalone/drakbackup:4567 ugtk2.pm:509
#, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Next"
+msgstr "Next"
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: help.pm:52 help.pm:418 help.pm:444 help.pm:660 help.pm:733 help.pm:768
+#: interactive.pm:371
#, c-format
-msgid "No password"
-msgstr "ไม่มีรหัสผ่าน"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Nigeria"
-msgstr "พอร์ตอนุกรม"
+msgid "Advanced"
+msgstr "Advanced"
-#: ../../standalone/drakTermServ:1
+#: help.pm:55
#, c-format
-msgid "%s: %s requires hostname...\n"
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
msgstr ""
-#: ../../install_interactive.pm:1
+#: help.pm:86
#, c-format
-msgid "There is no existing partition to use"
-msgstr "ไม่มีพาร์ติชั่นที่มีอยู่ที่ใช้งานได้"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. If a\n"
+"selected package is located on another CD-ROM, DrakX will eject the current\n"
+"CD and ask you to insert the correct CD as required."
+msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: help.pm:91
+#, c-format
msgid ""
-"The following scanners\n"
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
"\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux sorts packages groups in four categories. You can\n"
+"mix and match applications from the various categories, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' category installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the groups that are in the workstation category.\n"
+"\n"
+" * \"%s\": if you plan on using your machine for programming, select the\n"
+"appropriate groups from that category.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
-#: ../../printer/main.pm:1
+#: help.pm:137
#, fuzzy, c-format
-msgid "Multi-function device on parallel port #%s"
-msgstr "ชื่อของเครื่องพิมพ์"
+msgid "Workstation"
+msgstr "Workstation ที่ทำงาน"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
-msgstr ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
+#: help.pm:137
+#, c-format
+msgid "Development"
+msgstr "พัฒนาซอฟท์แวร์ (Development)"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "การตรวจหาฮาร์ดไดรว์"
+#: help.pm:137
+#, c-format
+msgid "Graphical Environment"
+msgstr "การทำงานแบบกราฟฟิก"
-#: ../../keyboard.pm:1
+#: help.pm:137 install_steps_interactive.pm:559
#, c-format
-msgid "Russian"
-msgstr "รัสเซีย"
+msgid "With X"
+msgstr ""
-#: ../../lang.pm:1
+#: help.pm:137
#, fuzzy, c-format
-msgid "Jordan"
-msgstr "Iranian"
+msgid "With basic documentation"
+msgstr "ตำแหน่ง"
-#: ../../diskdrake/interactive.pm:1
+#: help.pm:137
#, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid failed"
+msgid "Truly minimal install"
+msgstr "ออกจากการติดตั้ง"
+
+#: help.pm:137 install_steps_gtk.pm:270 install_steps_interactive.pm:605
+#, c-format
+msgid "Individual package selection"
+msgstr "Individual package selection"
-#: ../../printer/printerdrake.pm:1
+#: help.pm:137 help.pm:602
#, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Upgrade"
+msgstr "Update"
+
+#: help.pm:140
+#, c-format
+msgid ""
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
+"\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
+"\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
+"\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each them such\n"
+"that installation of one package requires that some other program is also\n"
+"required to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
+"\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
+msgstr ""
-#: ../../any.pm:1
+#: help.pm:172 help.pm:301 help.pm:329 help.pm:457 install_any.pm:422
+#: interactive.pm:149 modules/interactive.pm:71 standalone/harddrake2:218
+#: ugtk2.pm:1046 wizards.pm:156
#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "ขออภัย ไม่มีฟล้อปปี้ไดรว์เลย"
+msgid "No"
+msgstr "ไม่ต้อง"
-#: ../../lang.pm:1
+#: help.pm:172 help.pm:301 help.pm:457 install_any.pm:422 interactive.pm:149
+#: modules/interactive.pm:71 standalone/drakgw:280 standalone/drakgw:281
+#: standalone/drakgw:289 standalone/drakgw:299 standalone/harddrake2:217
+#: ugtk2.pm:1046 wizards.pm:156
#, c-format
-msgid "Bolivia"
+msgid "Yes"
+msgstr "ใช่"
+
+#: help.pm:172
+#, c-format
+msgid "Automatic dependencies"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: help.pm:175
#, c-format
msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to auto-detect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
+"\n"
+"When configuring your network, the available connections options are:\n"
+"Normal modem connection, Winmodem connection, ISDN modem, ADSL connection,\n"
+"cable modem, and finally a simple LAN connection (Ethernet).\n"
+"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"About Winmodem Connection. Winmodems are special integrated low-end modems\n"
+"that require additional software to work compared to Normal modems. Some of\n"
+"those modems actually work under Mandrake Linux, some others do not. You\n"
+"can consult the list of supported modems at LinModems.\n"
"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: help.pm:197
#, c-format
-msgid "Bad package"
-msgstr "แพ็คเก็จชำรุด"
+msgid "Use auto detection"
+msgstr "ใช้ auto detection"
-#: ../advertising/07-server.pl:1
+#: help.pm:200
#, c-format
msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
msgstr ""
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "/Options/ทดลอง"
+#: help.pm:203 help.pm:581 help.pm:991 install_steps_gtk.pm:646
+#: standalone/drakbackup:2688 standalone/drakbackup:2696
+#: standalone/drakbackup:2704 standalone/drakbackup:2712
+#, c-format
+msgid "Configure"
+msgstr "การปรับแต่ง"
-#: ../../standalone/draksound:1
+#: help.pm:206
#, c-format
msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
"\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program. Just type \"sndconfig\" in a console."
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "โดเมน NIS"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Group"
-msgstr "เวิร์กกรุ๊ป (workgroup)"
+#: help.pm:224
+#, c-format
+msgid ""
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same time zone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can be used by\n"
+"other machines on your local network as well."
+msgstr ""
-#: ../../lang.pm:1
+#: help.pm:235 install_steps_interactive.pm:834
#, fuzzy, c-format
-msgid "Canada"
-msgstr "ปฎิทิน"
+msgid "Hardware clock set to GMT"
+msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"
-#: ../../standalone/scannerdrake:1
+#: help.pm:235
#, fuzzy, c-format
-msgid "choose device"
-msgstr "อุปกรณ์บูต"
+msgid "Automatic time synchronization"
+msgstr "Boot Style Configuration"
-#: ../../diskdrake/interactive.pm:1
+#: help.pm:238
#, c-format
-msgid "Remove from LVM"
-msgstr "ลบออกจาก LVM"
+msgid ""
+"Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the situation where different servers are available for your card,\n"
+"with or without 3D acceleration, you are asked to choose the server that\n"
+"best suits your needs."
+msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: help.pm:249
#, c-format
-msgid "Timezone"
-msgstr "โซนเวลา"
+msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
+"\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+" In the situation where different servers are available for your card,\n"
+"with or without 3D acceleration, you are asked to choose the server that\n"
+"best suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is incorrect, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor picture.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+" Depending on your hardware, this entry might not appear.\n"
+"\n"
+" the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the auto-detected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
+msgstr ""
-#: ../../keyboard.pm:1
+#: help.pm:304
#, c-format
-msgid "German"
-msgstr "เยอรมัน"
+msgid ""
+"Monitor\n"
+"\n"
+" The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is incorrect, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
-#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: help.pm:311
#, c-format
-msgid "Next ->"
-msgstr "Next ->"
+msgid ""
+"Resolution\n"
+"\n"
+" Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor picture."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: help.pm:319
#, c-format
msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+"In the situation where different servers are available for your card, with\n"
+"or without 3D acceleration, you are asked to choose the server that best\n"
+"suits your needs."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
+#: help.pm:324
+#, c-format
msgid ""
+"Options\n"
"\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+" Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
msgstr ""
-"\n"
-"มีความเป็นไปได้ที่พาร์ติชั่นนี้\n"
-"เป็นพาร์ติชั่นของไดรเวอร์ คุณควรที่จะ\n"
-"ปล่อยมันทิ้งไว้แบบนี้\n"
-#: ../../lang.pm:1
+#: help.pm:332
#, c-format
-msgid "Guinea-Bissau"
+msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"GNU/Linux. To do so, you can delete your Microsoft Windows partition and\n"
+"data (see ``Erase entire disk'' solution) or resize your Microsoft Windows\n"
+"FAT or NTFS partition. Resizing can be performed without the loss of any\n"
+"data, provided you have previously defragmented the Windows partition.\n"
+"Backing up your data is strongly recommended.. Using this option is\n"
+"recommended if you want to use both Mandrake Linux and Microsoft Windows on\n"
+"the same computer.\n"
+"\n"
+" Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+" !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions'' section in the ``Starter Guide''."
msgstr ""
-#: ../../Xconfig/monitor.pm:1
+#: help.pm:389 install_interactive.pm:95
#, c-format
-msgid "Horizontal refresh rate"
-msgstr "อัตราการรีเฟรชตามแนวนอน"
+msgid "Use free space"
+msgstr "ใช้พื้นที่ที่ว่าง"
-#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1
+#: help.pm:389
#, fuzzy, c-format
-msgid "Edit"
-msgstr "Ext2"
+msgid "Use existing partition"
+msgstr "ใช้พาร์ติชั่นที่มีอยู่"
-#: ../../diskdrake/interactive.pm:1
+#: help.pm:389 install_interactive.pm:137
#, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
-msgstr ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+msgid "Use the free space on the Windows partition"
+msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
-#: ../../printer/printerdrake.pm:1
+#: help.pm:389 install_interactive.pm:211
#, c-format
-msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
-msgstr ""
+msgid "Erase entire disk"
+msgstr "ลบ disk ทั้งหมด"
+
+#: help.pm:389
+#, fuzzy, c-format
+msgid "Remove Windows"
+msgstr "ลบ Windows(TM)"
-#: ../../harddrake/data.pm:1
+#: help.pm:389 install_interactive.pm:226
#, c-format
-msgid "USB controllers"
+msgid "Custom disk partitioning"
+msgstr "กำลังพาร์ติชั่น Custom disk"
+
+#: help.pm:392
+#, c-format
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. Don't forget to\n"
+"remove the installation media (CD-ROM or floppy). The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+" Note that two different options are available after clicking the button:\n"
+"\n"
+" * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+" * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+" This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\": saves a list of the packages selected in this installation. To\n"
+"use this selection with another installation, insert the floppy and start\n"
+"the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<."
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: help.pm:418
#, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
+msgid "Generate auto-install floppy"
+msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"
-#: ../../standalone/drakconnect:1
+#: help.pm:418 install_steps_interactive.pm:1320
#, c-format
-msgid "Type:"
-msgstr "ประเภท: "
+msgid "Replay"
+msgstr "เรียกอีกครั้ง"
-#: ../../printer/printerdrake.pm:1
+#: help.pm:418 install_steps_interactive.pm:1320
#, c-format
-msgid "Share name"
-msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+msgid "Automated"
+msgstr "อัตโนมัติ"
-#: ../../standalone/drakgw:1
+#: help.pm:418 install_steps_interactive.pm:1323
#, c-format
-msgid "enable"
-msgstr "enable"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"
+msgid "Save packages selection"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
+#: help.pm:421
+#, c-format
msgid ""
-"A problem occured while restarting the network: \n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
"\n"
-"%s"
-msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
+"\n"
+"Click on \"%s\" when you are ready to format the partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "ฟอร์แมต loopback file %s"
+#: help.pm:444 help.pm:1005 install_steps_gtk.pm:431 interactive.pm:404
+#: interactive/newt.pm:307 printer/printerdrake.pm:2920
+#: standalone/drakTermServ:371 standalone/drakbackup:4288
+#: standalone/drakbackup:4316 standalone/drakbackup:4374
+#: standalone/drakbackup:4400 standalone/drakbackup:4426
+#: standalone/drakbackup:4483 standalone/drakbackup:4509
+#: standalone/drakbackup:4539 standalone/drakbackup:4563 ugtk2.pm:507
+#, c-format
+msgid "Previous"
+msgstr "ก่อน"
-#: ../../install_steps_interactive.pm:1
+#: help.pm:447
#, c-format
-msgid "Selected size is larger than available space"
+msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages will have been updated since the initial release. Bugs may have\n"
+"been fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
+"\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one near to you. A package-selection tree will\n"
+"appear: review the selection, and press \"%s\" to retrieve and install the\n"
+"selected package(s), or \"%s\" to abort."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: help.pm:457 help.pm:602 install_steps_gtk.pm:430
+#: install_steps_interactive.pm:148 standalone/drakbackup:4602
#, c-format
-msgid "NCP server name missing!"
+msgid "Install"
+msgstr "ติดตั้ง"
+
+#: help.pm:460
+#, c-format
+msgid ""
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
+"\n"
+"If you do not know what to choose, stay with the default option. You will\n"
+"be able to change that security level later with tool draksec from the\n"
+"Mandrake Control Center.\n"
+"\n"
+"The \"%s\" field can inform the system of the user on this computer who\n"
+"will be responsible for security. Security messages will be sent to that\n"
+"address."
msgstr ""
-#: ../../any.pm:1
+#: help.pm:472
#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "คุณมีเม้าส์ชนิดใด"
+msgid "Security Administrator"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: help.pm:475
+#, c-format
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": un-checking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
+msgstr ""
-#: ../../keyboard.pm:1
+#: help.pm:544
+#, c-format
+msgid "Removable media auto-mounting"
+msgstr ""
+
+#: help.pm:544
#, fuzzy, c-format
-msgid "Laotian"
-msgstr "ตำแหน่ง"
+msgid "Toggle between normal/expert mode"
+msgstr "สำหรับผู้ชำนาญ > ปกติ"
-#: ../../lang.pm:1
+#: help.pm:547
#, c-format
-msgid "Samoa"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose the one which you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
msgstr ""
-#: ../../services.pm:1
+#: help.pm:578
#, c-format
msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: help.pm:584
#, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid ""
+"This step is activated only if an existing GNU/Linux partition has been\n"
+"found on your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
msgstr ""
-#: ../../modules/interactive.pm:1
-#, fuzzy, c-format
-msgid "Module configuration"
-msgstr "การคอนฟิก"
+#: help.pm:605
+#, c-format
+msgid ""
+"Depending on the language you chose in section , DrakX will automatically\n"
+"select a particular type of keyboard configuration. Check that the\n"
+"selection suits you or choose another keyboard layout.\n"
+"\n"
+"Also, you may not have a keyboard that corresponds exactly to your\n"
+"language: for example, if you are an English-speaking Swiss native, you may\n"
+"have a Swiss keyboard. Or if you speak English and are located in Quebec,\n"
+"you may find yourself in the same situation where your native language and\n"
+"country-set keyboard do not match. In either case, this installation step\n"
+"will allow you to select an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
+msgstr ""
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Scanner"
-msgstr "เลือกกราฟฟิคการ์ด"
+#: help.pm:624
+#, c-format
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"About UTF-8 (unicode) support: Unicode is a new character encoding meant to\n"
+"cover all existing languages. Though full support for it in GNU/Linux is\n"
+"still under development. For that reason, Mandrake Linux will be using it\n"
+"or not depending on the user choices:\n"
+"\n"
+" * If you choose a languages with a strong legacy encoding (latin1\n"
+"languages, Russian, Japanese, Chinese, Korean, Thai, Greek, Turkish, most\n"
+"iso-8859-2 languages), the legacy encoding will be used by default;\n"
+"\n"
+" * Other languages will use unicode by default;\n"
+"\n"
+" * If two or more languages are required, and those languages are not using\n"
+"the same encoding, then unicode will be used for the whole system;\n"
+"\n"
+" * Finally, unicode can also be forced for the system at user request by\n"
+"selecting option \"%s\" independently of which language(s) have been\n"
+"chosen.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will also be installed.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ระวัง การทดสอบการ์ดแสดงผลอาจทำให้คอมพิวเตอร์หยุดการทำงาน"
+#: help.pm:660
+#, c-format
+msgid "Espanol"
+msgstr ""
-#: ../../any.pm:1
+#: help.pm:663
#, c-format
msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "ชื่อผู้ใช้จะสามารถมีได้เฉพาะตัวอักษรตัวเล็ก ตัวเลข '-' และ '_'"
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"In case you have a 3 buttons mouse without wheel, you can choose the mouse\n"
+"that says \"%s\". DrakX will then configure your mouse so that you can\n"
+"simulate the wheel with it: to do so, press the middle button and move your\n"
+"mouse up and down.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: help.pm:691
#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "แบบผู้เชี่ยวชาญ (Expert)"
-
-#: ../../security/level.pm:1
-#, c-format
-msgid "Welcome To Crackers"
-msgstr "Welcome To Crackers"
+msgid "with Wheel emulation"
+msgstr "Logitech MouseMan"
-#: ../../modules/interactive.pm:1
+#: help.pm:694
#, c-format
-msgid "Module options:"
-msgstr "อ๊อปชั่นของโมดูล:"
+msgid ""
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
+msgstr ""
-#: ../advertising/11-mnf.pl:1
+#: help.pm:698
#, c-format
-msgid "Secure your networks with the Multi Network Firewall"
+msgid ""
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password you chose is too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
+"\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
+"\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
+"\n"
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
+"\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
+"\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
+"\n"
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the Internet and you absolutely trust everybody\n"
+"who uses your computer, you can choose to have \"%s\"."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: help.pm:733
#, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"
+msgid "authentication"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../../network/isdn.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: help.pm:733 install_steps_interactive.pm:1154
#, c-format
-msgid "Abort"
-msgstr "เลิก"
+msgid "No password"
+msgstr "ไม่มีรหัสผ่าน"
-#: ../../standalone/drakbackup:1
+#: help.pm:736
#, c-format
-msgid "No password prompt on %s at port %s"
+msgid ""
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+" * \"%s\": if you prefer GRUB (text menu).\n"
+"\n"
+" * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+" * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+" * \"%s\": ACPI is a new standard (appeared during year 2002) for power\n"
+"management, notably for laptops. If you know your hardware supports it and\n"
+"you need it, check this box.\n"
+"\n"
+" * \"%s\": If you noticed hardware problems on your machine (IRQ conflicts,\n"
+"instabilities, machine freeze, ...) you should try disabling APIC by\n"
+"checking this box.\n"
+"\n"
+"!! Be aware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
msgstr ""
-#: ../../mouse.pm:1
+#: help.pm:768
#, fuzzy, c-format
-msgid "Kensington Thinking Mouse with Wheel emulation"
-msgstr "Kensington Thinking Mouse"
+msgid "GRUB"
+msgstr "GB"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "ใช้พื้นที่ที่ว่าง"
+#: help.pm:768
+#, c-format
+msgid "/dev/hda"
+msgstr "/dev/hda"
-#: ../../install_interactive.pm:1
+#: help.pm:768
#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr "Windows partition ของคุณกระจัดกระจายมากเกินไป กรุณา Defrag ก่อน"
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
-#: ../../keyboard.pm:1
+#: help.pm:768
#, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
+
+#: help.pm:768
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"
-#: ../../standalone/drakbackup:1
+#: help.pm:768
#, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Force no APIC"
msgstr ""
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: help.pm:771
#, c-format
-msgid "Unable to fork: %s"
-msgstr "ไม่สามารถ forkได้.%s"
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
+#: standalone/drakbackup:1843 standalone/drakfont:586 standalone/drakfont:649
+#: standalone/drakvpn:329 standalone/drakvpn:690
#, c-format
-msgid "Type: "
-msgstr "ประเภท: "
+msgid "Add"
+msgstr "เพิ่ม"
-#: ../../standalone/drakTermServ:1
+#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP Client"
+msgid "Modify"
+msgstr "แก้ไข RAID"
-#: ../../standalone/drakfont:1
+#: help.pm:784 interactive.pm:295 interactive/gtk.pm:480
+#: standalone/drakvpn:329 standalone/drakvpn:690
#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
-
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
-#: ../../harddrake/data.pm:1
-#, c-format
-msgid "Mouse"
-msgstr "Mouse"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "not enough room in /boot"
-msgstr "ไม่มีที่พอใน /boot"
+msgid "Remove"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../install_steps_gtk.pm:1
+#: help.pm:787
#, c-format
-msgid "trying to promote %s"
+msgid ""
+"LILO and GRUB are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a GRUB/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or any\n"
+"other OS installed on your machine.\n"
+"\n"
+" * if a GRUB or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader. Generally, the \"%s\" is the safest place. Choosing \"%s\"\n"
+"won't install any bootloader. Use it only if you know what you are doing."
msgstr ""
-#: ../../lang.pm:1
+#: help.pm:803
#, c-format
-msgid "Liechtenstein"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it is compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: help.pm:826
#, c-format
-msgid "Host name"
-msgstr "ชื่อโฮสต์:"
-
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "the color of the progress bar"
+msgid "pdq"
msgstr ""
-#: ../../standalone/drakfont:1
+#: help.pm:826 printer/cups.pm:99 printer/data.pm:82
#, c-format
-msgid "Suppress Fonts Files"
+msgid "CUPS"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Add to RAID"
-msgstr "เพิ่มให้ RAID"
+#: help.pm:829
+#, fuzzy, c-format
+msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
+"\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
+"\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX จะพยายามหา PCI SCSI adapter(s) ถ้า DrakX\n"
+"หาเจอ SCSI adapter และรู้ว่าควรใช้ไดร์เวอร์อะไร มันก็จะ\n"
+"ถูกติดตั้งโดยออโตเมติก\n"
+"\n"
+"\n"
+"ถ้าคุณมี SCSI adapter ISA adapter หรือ PCI SCSI adapter ที่ DrakX\n"
+"ไม่สามารถหาเจอ คุณจะโดนถามว่ามี SCSI adapter ในเครื่องของคุณ\n"
+"หรือไม่ ถ้าไม่มีกรุณากดที่ \"ไม่\" แต่ถ้าคุณกดลงที่ \"ไช่\" คุณจะต้องเลือก\n"
+"ชนิดของ adapter ที่คุณมีอยู่\n"
+"\n"
+"\n"
+"ถ้าคุณเป็นคนเลือก Adapter เอง DrakX จะถามว่าคุณจะป้อนข้อมูล\n"
+"Option หรือไม่ ถึงตรงนี้คุณควรจะให้ DrakX ค้นหา option ที่เหมาะสม\n"
+"ซึ่งโดยทั่วไปมันจะสามารถหาได้เองอย่างถูกต้อง\n"
+"\n"
+"\n"
+"แต่ถ้าไม่สำเร็จคุณจำเป็นที่จะต้องให้ข้อมูล Option เอง คุณควรหาข้อมูลเพิ่ม\n"
+"เติมได้จากคู่มือ (บทที่ 3 ตอน Collective informations on your hardware ) หรือ \n"
+"จาก Web Site ของผู้ผลิต หรือ จาก Microsoft Windows ถ้าคุณมีติดตั้ง"
-#: ../../help.pm:1
+#: help.pm:847
#, c-format
msgid ""
"You can add additional entries in yaboot for other operating systems,\n"
@@ -3587,10 +4334,10 @@ msgid ""
"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
"The following are some examples:\n"
"\n"
-" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+" \t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
"hda=autotune\n"
"\n"
-" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+" \t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
"\n"
" * Initrd: this option can be used either to load initial modules before\n"
"the boot device is available, or to load a ramdisk image for an emergency\n"
@@ -3613,363 +4360,727 @@ msgid ""
"highlighted with a ``*'' if you press [Tab] to see the boot selections."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: help.pm:894
#, c-format
msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Take care to choose the correct\n"
+"parameters.\n"
+"\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
msgstr ""
-#: ../../lang.pm:1
+#: help.pm:926
#, c-format
-msgid "Saudi Arabia"
+msgid ""
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
msgstr ""
-#: ../../services.pm:1
+#: help.pm:929 help.pm:991 install_steps_interactive.pm:962
+#: install_steps_interactive.pm:979
#, c-format
-msgid "Internet"
-msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Continue anyway?"
-msgstr "ทำงานต่อหรือไม่?"
+msgid "Sound card"
+msgstr "Sound card"
-#: ../../printer/printerdrake.pm:1
+#: help.pm:932
#, c-format
msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
+"\n"
+" * \"%s\": check the current keyboard map configuration and change it if\n"
+"necessary.\n"
+"\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
+"\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
+"\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
+"\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
+"\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
+"\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
+"\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
+"\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
+"\n"
+" * \"%s\": If you wish to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
+"\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
+"\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
-#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
+#: help.pm:991 install_steps_interactive.pm:110
+#: install_steps_interactive.pm:899 standalone/keyboarddrake:23
#, c-format
-msgid "Printer"
-msgstr "เครื่องพิมพ์"
+msgid "Keyboard"
+msgstr "คีย์บอร์ด"
-#: ../../standalone/service_harddrake:1
+#: help.pm:991 install_steps_interactive.pm:921
#, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "Timezone"
+msgstr "โซนเวลา"
+
+#: help.pm:991
+#, fuzzy, c-format
+msgid "Graphical Interface"
+msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
-#: ../../diskdrake/interactive.pm:1
+#: help.pm:991 install_steps_interactive.pm:995
#, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "ข้อมูลทางกายภาพ: %s ไซลินเดอร์, %s หัวอ่าน, %s เซ้กเตอร์\n"
+msgid "TV card"
+msgstr "TV card"
-#: ../../printer/printerdrake.pm:1
+#: help.pm:991
#, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+msgid "ISDN card"
+msgstr "Internal ISDN card"
+
+#: help.pm:991 install_steps_interactive.pm:1013 standalone/drakbackup:2394
+#, fuzzy, c-format
+msgid "Network"
+msgstr "Network interface"
-#: ../../standalone/drakTermServ:1
+#: help.pm:991 install_steps_interactive.pm:1039
+#, fuzzy, c-format
+msgid "Security Level"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+
+#: help.pm:991 install_steps_interactive.pm:1053
#, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Firewall"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: help.pm:991 install_steps_interactive.pm:1067
#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "กู้ตารางพาร์ติชั่น"
+msgid "Bootloader"
+msgstr "Bootloader ที่จะใช้"
-#: ../../standalone/drakbug:1
-#, c-format
+#: help.pm:991 install_steps_interactive.pm:1077 services.pm:195
+#, fuzzy, c-format
+msgid "Services"
+msgstr "อุปกรณ์"
+
+#: help.pm:994
+#, fuzzy, c-format
msgid ""
-"To submit a bug report, click the report button, which will open your "
-"default browser\n"
-"to Anthill where you will be able to upload the above information as a bug "
-"report."
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data on this drive will be lost\n"
+"and will not be recoverable!"
+msgstr ""
+"เลือก harddisk ที่ต้องการลบและลง Mandrake Linux\n"
+"ควรระวังเป็นอย่างมากดพราะว่าข้อมูลทุกอย่างจะถูกลบ\n"
+"และจะไม่สามารถกู้คืนได้"
+
+#: help.pm:999
+#, fuzzy, c-format
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to quit this operation without losing data and partitions\n"
+"present on this hard drive."
msgstr ""
+"กด \"OK\" ถ้าคุณต้องการลบข้อมูลทั้งหมดบน harddisk นี้\n"
+"นี่รวมถึง partitions ทั้งหมดซึ่งรวมถึง Windows ด้วย\n"
+"\n"
+"\n"
+"กด \"ยกเลิก\" เพื่อยกเสิกการทำงานนี้"
-#: ../../network/netconnect.pm:1
+#: install2.pm:119
#, c-format
-msgid "Choose the profile to configure"
-msgstr "เลือก profile ที่จะปรับแต่ง"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
+msgstr ""
-#: ../../security/l10n.pm:1
+#: install2.pm:169
#, c-format
-msgid "Password minimum length and number of digits and upcase letters"
+msgid "You must also format %s"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: install_any.pm:413
#, c-format
msgid ""
+"You have selected the following server(s): %s\n"
"\n"
"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-
-#: ../../fsedit.pm:1
+#: install_any.pm:434
#, c-format
-msgid "Mount points should contain only alphanumerical characters"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
-
-#: ../../../move/tree/mdk_totem:1
-#, c-format
-msgid "You can only run with no CDROM support"
+msgid ""
+"The following packages will be removed to allow upgrading your system: %s\n"
+"\n"
+"\n"
+"Do you really want to remove these packages?\n"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: install_any.pm:812
#, c-format
-msgid "See hardware info"
-msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Day"
-msgstr "พฤษภาคม"
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"
-#: ../../any.pm:1
+#: install_any.pm:816
#, c-format
-msgid "First sector of boot partition"
-msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
+msgid "This floppy is not FAT formatted"
+msgstr "่แผ่นฟล้อปปี้นี้ ไม่ใช่ แบบFAT"
-#: ../../printer/printerdrake.pm:1
+#: install_any.pm:828
#, c-format
-msgid "Printer manufacturer, model"
+msgid ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
msgstr ""
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
-#: ../../printer/data.pm:1
+#: install_any.pm:856 partition_table.pm:845
#, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
+msgid "Error reading file %s"
+msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
-#: ../../standalone.pm:1
+#: install_any.pm:973
#, c-format
msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable : enable MTS\n"
-"--disable : disable MTS\n"
-"--start : start MTS\n"
-"--stop : stop MTS\n"
-"--adduser : add an existing system user to MTS (requires username)\n"
-"--deluser : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
msgstr ""
+"เกิดข้อผิดพลาดขึ้น - ไม่พบอุปกรณ์ที่ถูกต้องเพื่อจะสร้างระบบไฟล์ใหม่ "
+"โปรดตรวจสอบฮาร์ดแวร์ของท่านเพื่อแก้ไขปัญหานี้"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Subnet Mask:"
-msgstr ""
+#: install_gtk.pm:161
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "การติดตั้ง SILO"
-#: ../../security/l10n.pm:1
+#: install_gtk.pm:164
+#, fuzzy, c-format
+msgid "System configuration"
+msgstr "การคอนฟิก"
+
+#: install_interactive.pm:22
#, c-format
-msgid "Set password expiration and account inactivation delays"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
msgstr ""
+"hardware บางชนิดต้องการ driver พิเศษ\n"
+"คุณสามารถหาข้อมูลได้จาก: %s"
-#: ../../standalone/logdrake:1
+#: install_interactive.pm:62
#, c-format
msgid ""
-"_: load here is a noun, the load of the system\n"
-"Load"
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
msgstr ""
+"คุณต้องมี root พาร์ติชั่น\n"
+"เพราะฉนั้นคุณต้องสร้าง พาร์ติชั่น (หรือกดเลือกอันที่มีอยู่)\n"
+"หลังจากนั้นเลือก ``Mount Point'' และจัดให้มันเป็น `/'"
-#: ../../Xconfig/monitor.pm:1
+#: install_interactive.pm:67
#, c-format
msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
+"You don't have a swap partition.\n"
"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+"Continue anyway?"
msgstr ""
-"ขั้นตอนต่อไปนี้จะต้องใส่พารามิเตอร์ที่มีความสำคัญสองตัว ได้แก่อัตราความถี่\n"
-"ของการสแกนภาพตามแนวตั้ง (vertical refresh rate) ซึ่งเป็นความถี่ที่มีการ\n"
-"รีเฟรชจอภาพทั้งจอ และการอัตราสแกนภาพตามแนวนอน ซึ่งเป็นอัตราของการวาดของ\n"
-"เส้นกวาดสิ่งที่สำคัญมากก็คือ คุณจะต้องระบุชนิดของหน้าจอซึ่งอัตราความถี่ที่\n"
-"ไม่เกินความสามารถของจอภาพ ไม่เช่นนั้นอาจเกิดความเสียหายกับจอภาพได้\n"
-"หากไม่แน่ใจโปรดเลือกเซ็ตอัพแบบมาตรฐาน"
+"คุณไม่มีสวอปพาร์ติชั่นเลย\n"
+"\n"
+"ต้องการจะทำต่อหรือไม่?"
-#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: install_interactive.pm:70 install_steps.pm:206
#, fuzzy, c-format
-msgid "Modify"
-msgstr "แก้ไข RAID"
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
-#: ../../printer/printerdrake.pm:1
+#: install_interactive.pm:97
#, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
+msgid "Not enough free space to allocate new partitions"
+msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
-#: ../../standalone/drakbackup:1
+#: install_interactive.pm:105
#, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Insert floppy"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+msgid "Use existing partitions"
+msgstr "ใช้พาร์ติชั่นที่มีอยู่"
-#: ../../diskdrake/dav.pm:1
+#: install_interactive.pm:107
#, c-format
-msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
-msgstr ""
+msgid "There is no existing partition to use"
+msgstr "ไม่มีพาร์ติชั่นที่มีอยู่ที่ใช้งานได้"
-#: ../../standalone/drakbug:1
+#: install_interactive.pm:114
#, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "Use the Windows partition for loopback"
+msgstr "ใช้ windows partion สำหรับการ Loopback"
-#: ../../diskdrake/interactive.pm:1
+#: install_interactive.pm:117
#, c-format
-msgid "new"
-msgstr "ใหม่"
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "พาร์ติชั่นใหนที่ท่านต้องการใช้กับ Linux4Win"
-#: ../../security/help.pm:1
+#: install_interactive.pm:119
#, c-format
-msgid "Enable/Disable syslog reports to console 12"
-msgstr ""
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"
+msgid "Choose the sizes"
+msgstr "เลือกขนาด"
-#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: install_interactive.pm:120
#, c-format
-msgid "Wizard"
-msgstr "Wizard"
+msgid "Root partition size in MB: "
+msgstr "ขนาดของพาร์ติชั่นรูท MB:"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "ค้นพบ %s"
+#: install_interactive.pm:121
+#, c-format
+msgid "Swap partition size in MB: "
+msgstr "ขนาดพาร์ติชั่น Swapเป็น MB: "
-#: ../../standalone/drakbackup:1
+#: install_interactive.pm:130
#, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
-#: ../../install_steps_interactive.pm:1
+#: install_interactive.pm:139
#, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "คุณต้องทำการรีบูตระบบให้เครื่องรับทราบการเปลี่ยนแปลงตารางพาร์ติชั่น"
+msgid "Which partition do you want to resize?"
+msgstr "พาร์ติชั่นไหนที่คุณต้องการเปลี่ยนขนาด"
-#: ../../standalone/drakbackup:1
+#: install_interactive.pm:153
#, c-format
-msgid "Do not include the browser cache"
+msgid ""
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
msgstr ""
+"ตัวเปลี่ยนขนาดไม่สามารถทำงานกับ partition ของคุณ\n"
+"มีข้อผิดพลาดนี้เกิดขึ้น: %s"
+
+#: install_interactive.pm:156
+#, fuzzy, c-format
+msgid "Computing the size of the Windows partition"
+msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
-#: ../../install_steps_interactive.pm:1
+#: install_interactive.pm:163
#, c-format
msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can lose data)"
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr "Windows partition ของคุณกระจัดกระจายมากเกินไป กรุณา Defrag ก่อน"
+
+#: install_interactive.pm:164
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful: this\n"
+"operation is dangerous. If you have not already done so, you\n"
+"first need to exit the installation, run \"chkdsk c:\" from a\n"
+"Command Prompt under Windows (beware, running graphical program\n"
+"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
+"Command Prompt!), optionally run defrag, then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
msgstr ""
+"ระวัง!\n"
+"DrakX กำลังจะลดขนาดพาร์ติชั่นของ windows การทำงานนี้อันตลายมาก\n"
+"ถ้าคุณยังไม่เคยทำมาก่อนคุณควรออกจากการทำงานนี้และรัน Scandisk บน\n"
+"Windows (และ defrag) แล้วค่อยเริ่มทำงานนี้ใหม่ และคุณสมควรที่จะทำการ\n"
+"Backup ข้อมูลสำคัญขึ้นมาก่อน\n"
+"เมื่อคุณแน่ใจแล้ว กด OK"
-#: ../../standalone/keyboarddrake:1
+#: install_interactive.pm:176
#, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
+msgid "Which size do you want to keep for Windows on"
+msgstr "คุณต้องการเก็บ Windows ไว้ในขนาดใหน"
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: install_interactive.pm:177
#, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid "partition %s"
+msgstr "พาร์ติชั่น %s"
-#: ../../standalone/mousedrake:1
+#: install_interactive.pm:186
#, c-format
-msgid "Please choose your mouse type."
-msgstr "คุณมีเม้าส์ชนิดใด"
+msgid "Resizing Windows partition"
+msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"
-#: ../../standalone/drakconnect:1
+#: install_interactive.pm:191
#, c-format
-msgid "Connect..."
-msgstr "ติดต่อ"
+msgid "FAT resizing failed: %s"
+msgstr "การกำหนดขนาด FAT เกิดการผิดพลาด: %s"
-#: ../../printer/printerdrake.pm:1
+#: install_interactive.pm:206
#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "การคอนฟิกเครื่องพิมพ์"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "not configured"
-msgstr "คอนฟิกใหม่"
+#: install_interactive.pm:211
+#, c-format
+msgid "Remove Windows(TM)"
+msgstr "ลบ Windows(TM)"
-#: ../../network/isdn.pm:1
+#: install_interactive.pm:213
#, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "คุณมี harddisk มากกว่า 1 ตัว คุณต้องการลง linux บน harddisk ตัวใหน"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "About"
-msgstr "เลิก"
+#: install_interactive.pm:217
+#, c-format
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นทั้งหมดจะสูญหายไป %s"
-#: ../../mouse.pm:1
+#: install_interactive.pm:230
#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+msgid "Use fdisk"
+msgstr "ใช้ fdisk"
-#: ../../network/network.pm:1
+#: install_interactive.pm:233
#, c-format
-msgid "Proxies configuration"
-msgstr "การคอนฟิก Proxies"
+msgid ""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
+msgstr ""
+"คุณสามารถพาร์ติชั่น %s เดี๋ยวนี้\n"
+"เมื่อเสร็จแล้วอย่าลืมบันทึกโดยใช้ `w'"
-#: ../../diskdrake/interactive.pm:1
+#: install_interactive.pm:269
#, c-format
-msgid "Start: sector %s\n"
-msgstr "เริ่มต้น: เซ็กเตอร์ %s\n"
+msgid "I can't find any room for installing"
+msgstr "ผมไม่สามารถหาพื้นที่ว่างเพื่อทำการติดตั้ง"
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "No Mask"
-msgstr "แพ็คเก็จชำรุด"
+#: install_interactive.pm:273
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "The DrakX Partitioning wizard เจอทางเลือกดังต่อไปนี้"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "ไม่มีการคอนฟิกจอภาพ"
+#: install_interactive.pm:279
+#, c-format
+msgid "Partitioning failed: %s"
+msgstr "การทำพาร์ติชั่นล้มเหลว: %s"
-#: ../../standalone/drakTermServ:1
+#: install_interactive.pm:286
#, c-format
-msgid "Couldn't access the floppy!"
+msgid "Bringing up the network"
+msgstr "ระบบเน็ตเวิร์กกำลังจะทำงาน"
+
+#: install_interactive.pm:291
+#, c-format
+msgid "Bringing down the network"
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+
+#: install_messages.pm:9
+#, c-format
+msgid ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
msgstr ""
+"Introduction\n"
+"\n"
+"The operating system and the different components available in the Mandrake "
+"Linux distribution \n"
+"shall be called the \"Software Products\" hereafter. The Software Products "
+"include, but are not \n"
+"restricted to, the set of programs, methods, rules and documentation related "
+"to the operating \n"
+"system and the different components of the Mandrake Linux distribution.\n"
+"\n"
+"\n"
+"1. License Agreement\n"
+"\n"
+"Please read this document carefully. This document is a license agreement "
+"between you and \n"
+"MandrakeSoft S.A. which applies to the Software Products.\n"
+"By installing, duplicating or using the Software Products in any manner, you "
+"explicitly \n"
+"accept and fully agree to conform to the terms and conditions of this "
+"License. \n"
+"If you disagree with any portion of the License, you are not allowed to "
+"install, duplicate or use \n"
+"the Software Products. \n"
+"Any attempt to install, duplicate or use the Software Products in a manner "
+"which does not comply \n"
+"with the terms and conditions of this License is void and will terminate "
+"your rights under this \n"
+"License. Upon termination of the License, you must immediately destroy all "
+"copies of the \n"
+"Software Products.\n"
+"\n"
+"\n"
+"2. Limited Warranty\n"
+"\n"
+"The Software Products and attached documentation are provided \"as is\", "
+"with no warranty, to the \n"
+"extent permitted by law.\n"
+"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by "
+"law, be liable for any special,\n"
+"incidental, direct or indirect damages whatsoever (including without "
+"limitation damages for loss of \n"
+"business, interruption of business, financial loss, legal fees and penalties "
+"resulting from a court \n"
+"judgment, or any other consequential loss) arising out of the use or "
+"inability to use the Software \n"
+"Products, even if MandrakeSoft S.A. has been advised of the possibility or "
+"occurence of such \n"
+"damages.\n"
+"\n"
+"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME "
+"COUNTRIES\n"
+"\n"
+"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, "
+"in no circumstances, be \n"
+"liable for any special, incidental, direct or indirect damages whatsoever "
+"(including without \n"
+"limitation damages for loss of business, interruption of business, financial "
+"loss, legal fees \n"
+"and penalties resulting from a court judgment, or any other consequential "
+"loss) arising out \n"
+"of the possession and use of software components or arising out of "
+"downloading software components \n"
+"from one of Mandrake Linux sites which are prohibited or restricted in some "
+"countries by local laws.\n"
+"This limited liability applies to, but is not restricted to, the strong "
+"cryptography components \n"
+"included in the Software Products.\n"
+"\n"
+"\n"
+"3. The GPL License and Related Licenses\n"
+"\n"
+"The Software Products consist of components created by different persons or "
+"entities. Most \n"
+"of these components are governed under the terms and conditions of the GNU "
+"General Public \n"
+"Licence, hereafter called \"GPL\", or of similar licenses. Most of these "
+"licenses allow you to use, \n"
+"duplicate, adapt or redistribute the components which they cover. Please "
+"read carefully the terms \n"
+"and conditions of the license agreement for each component before using any "
+"component. Any question \n"
+"on a component license should be addressed to the component author and not "
+"to MandrakeSoft.\n"
+"The programs developed by MandrakeSoft S.A. are governed by the GPL License. "
+"Documentation written \n"
+"by MandrakeSoft S.A. is governed by a specific license. Please refer to the "
+"documentation for \n"
+"further details.\n"
+"\n"
+"\n"
+"4. Intellectual Property Rights\n"
+"\n"
+"All rights to the components of the Software Products belong to their "
+"respective authors and are \n"
+"protected by intellectual property and copyright laws applicable to software "
+"programs.\n"
+"MandrakeSoft S.A. reserves its rights to modify or adapt the Software "
+"Products, as a whole or in \n"
+"parts, by all means and for all purposes.\n"
+"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of "
+"MandrakeSoft S.A. \n"
+"\n"
+"\n"
+"5. Governing Laws \n"
+"\n"
+"If any portion of this agreement is held void, illegal or inapplicable by a "
+"court judgment, this \n"
+"portion is excluded from this contract. You remain bound by the other "
+"applicable sections of the \n"
+"agreement.\n"
+"The terms and conditions of this License are governed by the Laws of "
+"France.\n"
+"All disputes on the terms of this license will preferably be settled out of "
+"court. As a last \n"
+"resort, the dispute will be referred to the appropriate Courts of Law of "
+"Paris - France.\n"
+"For any question on this document, please contact MandrakeSoft S.A. \n"
-#: ../../install_messages.pm:1
+#: install_messages.pm:89
#, c-format
msgid ""
"Warning: Free Software may not necessarily be patent free, and some Free\n"
@@ -3981,7305 +5092,7591 @@ msgid ""
"may be applicable to you, check your local laws."
msgstr ""
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Mail Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Please click on a partition"
-msgstr "โปรดเลือกพาร์ติชั่น"
-
-#: ../../printer/main.pm:1
+#: install_messages.pm:96
#, c-format
-msgid "Multi-function device on HP JetDirect"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer, duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
msgstr ""
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "ลีนุกซ์"
-
-#: ../../standalone/drakxtv:1
+#: install_messages.pm:128
#, c-format
-msgid "Have a nice day!"
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
msgstr ""
+"ขอแสดงความยินดี การติดตั้งเสร็จเรียบร้อย\n"
+"ให้เอาสื่อที่ใช้บูตออกจากไดรว์ (แผ่นฟล้อปปี้หรือซีดี) กดปุ่ม reboot เพื่อรีบูต\n"
+"\n"
+"\n"
+"สำหรับท่านที่ต้องการข้อมูลสำหรับการแก้ไขกับ ลีนุกซ์-แมนเดรก\n"
+"โปรดอ่าน Errata ได้ที่ \n"
+"\n"
+"\n"
+"%s\n"
+"\n"
+"\n"
+"ข้อมูลสำหรับการคอนฟิกระบบของคุณ สามารถหาได้จากช่วง\n"
+"บทหลังจากการติดตั้งของคู่มือแนะนำผู้ใช้งานลีนุกซ์-แมนเดรกฉบับเป็นทางการ"
-#: ../../help.pm:1
+#: install_messages.pm:141
#, c-format
-msgid "/dev/fd0"
-msgstr "/dev/fd0"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Update"
+msgid "http://www.mandrakelinux.com/en/100errata.php3"
+msgstr "http://www.mandrakelinux.com/en/100errata.php3"
-#: ../../printer/printerdrake.pm:1
+#: install_steps.pm:241
#, c-format
-msgid "Select Printer Connection"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Duplicate mount point %s"
+msgstr "ทำซ้ำจุดเม้าท์ %s"
-#: ../../standalone/drakxtv:1
+#: install_steps.pm:410
#, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid ""
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
msgstr ""
+"แพ็กเกจสำคัญบางอย่างไม่ได้ถูกติดตั้งอย่างเรียบร้อย\n"
+"cdrom หรือ cdrom drive ของคุณอาจมีการเสียหาย\n"
+"กรุณาตรวจสอบ cdrom ในเครื่องคอมพิวเตอร์ที่มีการติดตั้งแล้ว\n"
+"โดยใช้ \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../../standalone/drakbackup:1
+#: install_steps.pm:541
#, c-format
-msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
-msgstr ""
+msgid "No floppy drive available"
+msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"
-#: ../../standalone/drakTermServ:1
+#: install_steps_auto_install.pm:76 install_steps_stdio.pm:27
#, c-format
-msgid "IP Range Start:"
-msgstr ""
+msgid "Entering step `%s'\n"
+msgstr "เข้าสู่ขั้นตอน `%s'\n"
-#: ../../services.pm:1
+#: install_steps_gtk.pm:178
#, c-format
msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
msgstr ""
-"Internet superserver daemon (inetd) จะสั่งทำงานโปรแกรมหลายๆอย่าง\n"
-"เมื่อมีความต้องการเกิดขึ้น ตัวอย่างโปรแกรมที่มันรับผิดชอบคือ telnet\n"
-"ftp rsh และ rlogin การยกเลิก inetd จะทำให้โปรแกรมทั้งหมดที่มันรับ\n"
-"ผิดชอบอยู่ไม่ทำงาน"
+"เครื่องของคุณมีทรัพยากรค่อนข้างต่ำคุณอาจมีปัญหาติดตั้ง \n"
+"Mandrake Linux ถ้าเป็นเช่นนั้น กรุณาทดลองติดตั้งแบบ text \n"
+"กรุณากด F1 ขณะ boot จาก cdrom แล้วพิมพ์ text"
-#: ../../standalone/draksplash:1
+#: install_steps_gtk.pm:232 install_steps_interactive.pm:587
#, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "Package Group Selection"
+msgstr "เลือกกลุ่มแพ็คเก็จ"
-#: ../../standalone/drakbackup:1
+#: install_steps_gtk.pm:292 install_steps_interactive.pm:519
#, c-format
-msgid ""
-"\n"
-"- Save via %s on host: %s\n"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "ขนาดรวม: %d / %d MB "
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: install_steps_gtk.pm:338
#, c-format
-msgid "Argentina"
-msgstr ""
+msgid "Bad package"
+msgstr "แพ็คเก็จชำรุด"
-#: ../../network/drakfirewall.pm:1
+#: install_steps_gtk.pm:340
#, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "ชื่อโดเมน"
+msgid "Version: "
+msgstr "เวอร์ชั่น: %s\n"
-#: ../../standalone/draksec:1
+#: install_steps_gtk.pm:341
#, fuzzy, c-format
-msgid "Security Level:"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "จุดเม้าท์จะต้องเริ่มด้วย /"
+msgid "Size: "
+msgstr "ขนาด: %s"
-#: ../../standalone/drakbackup:1
+#: install_steps_gtk.pm:341
#, fuzzy, c-format
-msgid "Choose your CD/DVD device"
-msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
+msgid "%d KB\n"
+msgstr "ขนาด: %d KB\n"
-#: ../../network/drakfirewall.pm:1
+#: install_steps_gtk.pm:342
#, fuzzy, c-format
-msgid "CUPS server"
-msgstr "เซิร์ฟเวอร์ DNS"
+msgid "Importance: "
+msgstr "ความสำคัญ: %s\n"
-#: ../../standalone/logdrake:1
+#: install_steps_gtk.pm:375
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "คุณไม่สามารถเลือก/ไม่เลือกแพกเกจนี้"
+
+#: install_steps_gtk.pm:379
#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid "due to missing %s"
+msgstr "ไม่มี kdesu "
-#: ../../diskdrake/interactive.pm:1
+#: install_steps_gtk.pm:380
#, c-format
-msgid "Quit without saving"
-msgstr "ออกโดยไม่ต้องบันทึก"
+msgid "due to unsatisfied %s"
+msgstr ""
-#: ../../lang.pm:1
+#: install_steps_gtk.pm:381
#, c-format
-msgid "Yemen"
+msgid "trying to promote %s"
msgstr ""
-#: ../advertising/11-mnf.pl:1
+#: install_steps_gtk.pm:382
#, c-format
-msgid "This product is available on the MandrakeStore Web site."
+msgid "in order to keep %s"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: install_steps_gtk.pm:387
#, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "คุณไม่สามารถเลือก package นี้เนื่องจากคุณมีพื้นที่ไม่เพียงพอ"
-#: ../../standalone/drakclock:1
+#: install_steps_gtk.pm:390
#, c-format
-msgid "GMT - DrakClock"
-msgstr ""
+msgid "The following packages are going to be installed"
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
-#: ../../../move/move.pm:1
+#: install_steps_gtk.pm:391
#, c-format
-msgid ""
-"An error occurred:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"This may come from corrupted system configuration files\n"
-"on the USB key, in this case removing them and then\n"
-"rebooting Mandrake Move would fix the problem. To do\n"
-"so, click on the corresponding button.\n"
-"\n"
-"\n"
-"You may also want to reboot and remove the USB key, or\n"
-"examine its contents under another OS, or even have\n"
-"a look at log files in console #3 and #4 to try to\n"
-"guess what's happening."
-msgstr ""
+msgid "The following packages are going to be removed"
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
-#: ../../steps.pm:1
+#: install_steps_gtk.pm:415
#, c-format
-msgid "Hard drive detection"
-msgstr "การตรวจหาฮาร์ดไดรว์"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "นี่คือแพกเกจที่ต้องติดตั้ง ไม่สามารถไม่เลือก"
-#: ../../install_steps_interactive.pm:1
+#: install_steps_gtk.pm:417
#, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"
-#: ../../network/adsl.pm:1
+#: install_steps_gtk.pm:420
#, c-format
msgid ""
-"You need the Alcatel microcode.\n"
-"You can provide it now via a floppy or your windows partition,\n"
-"or skip and do it later."
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "กรุณาทดสอบเม้าส์"
+#: install_steps_gtk.pm:423
+#, c-format
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้ มันจำเป็นที่จะต้องถูก upgrade"
-#: ../../lang.pm:1
+#: install_steps_gtk.pm:428
#, c-format
-msgid "Tajikistan"
+msgid "Show automatically selected packages"
msgstr ""
-#: ../../help.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: install_steps_gtk.pm:433
+#, fuzzy, c-format
+msgid "Load/Save on floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
+
+#: install_steps_gtk.pm:434
+#, fuzzy, c-format
+msgid "Updating package selection"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+
+#: install_steps_gtk.pm:439
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "ออกจากการติดตั้ง"
+
+#: install_steps_gtk.pm:453 install_steps_interactive.pm:427
#, c-format
-msgid "Accept"
-msgstr "ยอมรับ"
+msgid "Choose the packages you want to install"
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง"
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#: ../../standalone/printerdrake:1
+#: install_steps_gtk.pm:469 install_steps_interactive.pm:673
#, c-format
-msgid "Description"
+msgid "Installing"
+msgstr "กำลังติดตั้ง"
+
+#: install_steps_gtk.pm:475
+#, fuzzy, c-format
+msgid "No details"
msgstr "รายละเอียด"
-#: ../../standalone/drakbug:1
+#: install_steps_gtk.pm:476
#, c-format
-msgid "Please enter summary text."
-msgstr ""
+msgid "Estimating"
+msgstr "การประเมิน"
-#: ../../fsedit.pm:1
+#: install_steps_gtk.pm:482
#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "เกิดข้อผิดพลาดในการเปิด %s สำหรับการเขียน: %s"
+msgid "Time remaining "
+msgstr "เวลาที่เหลือ "
-#: ../../Xconfig/various.pm:1
+#: install_steps_gtk.pm:494
#, c-format
-msgid "Mouse type: %s\n"
-msgstr "เลือกชนิดของเม้าส์: %s\n"
+msgid "Please wait, preparing installation..."
+msgstr "กำลังเตรียมการติดตั้ง"
-#: ../../Xconfig/card.pm:1
+#: install_steps_gtk.pm:555
#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Your card can have 3D hardware acceleration support with XFree %s."
+msgid "%d packages"
+msgstr "แพ็คเก็จ %d ชุด"
-#: ../../Xconfig/monitor.pm:1
+#: install_steps_gtk.pm:560
#, c-format
-msgid "Choose a monitor"
-msgstr "เลือกจอภาพ"
+msgid "Installing package %s"
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-#: ../../any.pm:1
+#: install_steps_gtk.pm:596 install_steps_interactive.pm:88
+#: install_steps_interactive.pm:697
#, c-format
-msgid "Empty label not allowed"
-msgstr "ไม่อนุญาตให้มีหัวข้อว่าง"
+msgid "Refuse"
+msgstr "ไม่ยอมรับ"
-#: ../../keyboard.pm:1
+#: install_steps_gtk.pm:597 install_steps_interactive.pm:698
#, c-format
-msgid "Maltese (UK)"
+msgid ""
+"Change your Cd-Rom!\n"
+"\n"
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
msgstr ""
+"เปลี่ยน CD-ROM\n"
+"\n"
+"กรุณาใส่ CD-ROM \"%s\" และกด OK\n"
+"ถ้่าคุณไม่มี กรุณากด ยกเลิก (cancel) เพื่อหลีกเลี่ยงการติดตั้งจาก CD-ROM นี้"
-#: ../../diskdrake/interactive.pm:1
+#: install_steps_gtk.pm:612 install_steps_interactive.pm:710
#, c-format
-msgid "I can't add any more partition"
-msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
+msgid "There was an error ordering packages:"
+msgstr "มีปัญหาการลำดับของแพ็คเก็จ:"
-#: ../../diskdrake/interactive.pm:1
+#: install_steps_gtk.pm:612 install_steps_gtk.pm:616
+#: install_steps_interactive.pm:710 install_steps_interactive.pm:714
#, c-format
-msgid "Size in MB: "
-msgstr "ขนาดเป็น MB: "
+msgid "Go on anyway?"
+msgstr "ทำงานต่อหรือไม่?"
-#: ../../printer/main.pm:1
+#: install_steps_gtk.pm:616 install_steps_interactive.pm:714
#, c-format
-msgid "Remote printer"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "There was an error installing packages:"
+msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"
-#: ../../any.pm:1
+#: install_steps_gtk.pm:656 install_steps_interactive.pm:881
+#: install_steps_interactive.pm:1029
#, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+msgid "not configured"
+msgstr "คอนฟิกใหม่"
+
+#: install_steps_interactive.pm:81
+#, fuzzy, c-format
+msgid "Do you want to recover your system?"
+msgstr "คุณต้องการใช้ aboot หรือไม่"
-#: ../../network/network.pm:1
+#: install_steps_interactive.pm:82
#, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
-msgstr ""
-"คำเตือน: อุปกรณ์นี้ได้ถูกปรับแต่งให้ใช้ในการต่อเข้า internet\n"
-"คุณสามารถยอมรับค่าต่างๆหรือทำการแก้ใขค่าต่างๆข้างล่างนี้\n"
-" "
+msgid "License agreement"
+msgstr "License agreement"
-#: ../../any.pm:1
+#: install_steps_interactive.pm:111
#, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"ผมไม่สามารถทำให้ท่านเข้าทำงานโดยใช้ชื่อคนคนหนึ่งแบบอัตโนมัติ\n"
-"ถ้าคุณไม่ต้องการใช้งานรูปแบบนี้กรุณากดปุ่มยกเลิก"
+msgid "Please choose your keyboard layout."
+msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
-#: ../../standalone/harddrake2:1
+#: install_steps_interactive.pm:113
+#, c-format
+msgid "Here is the full list of keyboards available"
+msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
+
+#: install_steps_interactive.pm:143
#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "ฟอร์แมต"
+msgid "Install/Upgrade"
+msgstr "ติดตั้ง/อัพเกรด "
-#: ../../standalone/drakfont:1
+#: install_steps_interactive.pm:144
#, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "เครื่องพิมพ์"
+msgid "Is this an install or an upgrade?"
+msgstr "นี่เป็นการติดตั้งหรือการอัพเกรด"
-#: ../../printer/printerdrake.pm:1
+#: install_steps_interactive.pm:150
+#, fuzzy, c-format
+msgid "Upgrade %s"
+msgstr "Update"
+
+#: install_steps_interactive.pm:160
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "รหัสผ่านไม่เหมือนกัน"
+
+#: install_steps_interactive.pm:177
+#, fuzzy, c-format
+msgid "Please choose your type of mouse."
+msgstr "คุณมีเม้าส์ชนิดใด"
+
+#: install_steps_interactive.pm:186 standalone/mousedrake:46
#, c-format
-msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
-msgstr ""
+msgid "Mouse Port"
+msgstr "พอร์ตของเม้าส์"
-#: ../../standalone/scannerdrake:1
+#: install_steps_interactive.pm:187 standalone/mousedrake:47
#, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
+#: install_steps_interactive.pm:197
+#, c-format
+msgid "Buttons emulation"
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+#: install_steps_interactive.pm:199
+#, c-format
+msgid "Button 2 Emulation"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: install_steps_interactive.pm:200
#, c-format
-msgid ""
-"\n"
-"Please check all options that you need.\n"
+msgid "Button 3 Emulation"
msgstr ""
-#: ../../any.pm:1
+#: install_steps_interactive.pm:221
#, c-format
-msgid "Initrd"
-msgstr "Initrd"
+msgid "PCMCIA"
+msgstr "PCMCIA"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "ยุบ tree"
+#: install_steps_interactive.pm:221
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "กำลังคอนฟิกการ์ด PCMCIA..."
-#: ../../standalone/harddrake2:1
+#: install_steps_interactive.pm:228
#, c-format
-msgid "whether this cpu has the Cyrix 6x86 Coma bug"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Loading printer configuration... Please wait"
-msgstr "การคอนฟิก Internet"
+#: install_steps_interactive.pm:228
+#, c-format
+msgid "Configuring IDE"
+msgstr "คอนฟิก IDE"
-#: ../../standalone/harddrake2:1
+#: install_steps_interactive.pm:248 network/tools.pm:197
#, c-format
-msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
-msgstr ""
+msgid "No partition available"
+msgstr "ไม่มีพาร์ติชั่นเหลือ"
-#: ../../lang.pm:1
+#: install_steps_interactive.pm:251
#, c-format
-msgid "Guam"
-msgstr ""
+msgid "Scanning partitions to find mount points"
+msgstr "Scanning partitions to find mount points"
+
+#: install_steps_interactive.pm:258
+#, c-format
+msgid "Choose the mount points"
+msgstr "เลือกจุดเม้าท์"
-#: ../../printer/printerdrake.pm:1
+#: install_steps_interactive.pm:288
#, c-format
msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
msgstr ""
-#: ../../standalone/logdrake:1
+#: install_steps_interactive.pm:325
#, c-format
-msgid "/Options/Test"
-msgstr "/Options/ทดลอง"
+msgid "Choose the partitions you want to format"
+msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"
+
+#: install_steps_interactive.pm:327
+#, c-format
+msgid "Check bad blocks?"
+msgstr "ตรวจสอบ bad blocks"
-#: ../../security/level.pm:1
+#: install_steps_interactive.pm:359
#, c-format
msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can lose data)"
msgstr ""
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "ฟอร์แมตพาร์ติชั่น %s"
-
-#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
+#: install_steps_interactive.pm:362
#, c-format
-msgid "User name"
-msgstr "ชื่อผู้ใช้"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "ไม่มีพื้นที่สวอปเพียงพอกับการติดตั้ง โปรดเพิ่มเนื้อที่"
-#: ../../standalone/drakbug:1
+#: install_steps_interactive.pm:369
#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "เครื่องพิมพ์"
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "กำลังหาแพ็คเก็จที่มีอยู่"
-#: ../../install_interactive.pm:1
+#: install_steps_interactive.pm:370 install_steps_interactive.pm:389
#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "พาร์ติชั่นใหนที่ท่านต้องการใช้กับ Linux4Win"
+msgid "Looking for available packages..."
+msgstr "กำลังหาแพ็คเก็จที่มีอยู่"
-#: ../../install_steps_gtk.pm:1
+#: install_steps_interactive.pm:373
#, fuzzy, c-format
-msgid "due to missing %s"
-msgstr "ไม่มี kdesu "
+msgid "Looking at packages already installed..."
+msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "กำลังตรวจสอบพอร์ต"
+#: install_steps_interactive.pm:377
+#, c-format
+msgid "Finding packages to upgrade..."
+msgstr "กำลังหาแพ็คเก็จที่จะทำการอัพเกรด"
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Logical volume name "
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+#: install_steps_interactive.pm:398
+#, c-format
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr "เครื่องของคุณไม่มีเนื้อที่เพียงพอในการติดตั้งหรือ upgrade (%d > %d)"
-#: ../../standalone/drakbackup:1
+#: install_steps_interactive.pm:439
#, c-format
msgid ""
-"List of data to restore:\n"
-"\n"
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
msgstr ""
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Checking %s"
-msgstr "ความละเอียดของภาพ %s\n"
-
-#: ../../printer/printerdrake.pm:1
+#: install_steps_interactive.pm:441
#, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "อ็อปชั่นของเครื่องพิมพ์โลคอล"
+msgid "Load from floppy"
+msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: install_steps_interactive.pm:441
#, c-format
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
+msgid "Save on floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
-#: ../../standalone/net_monitor:1
+#: install_steps_interactive.pm:445
#, fuzzy, c-format
-msgid "Disconnecting from Internet "
-msgstr "ต่อเข้า Internet "
+msgid "Package selection"
+msgstr "เลือกกลุ่มแพ็คเก็จ"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: install_steps_interactive.pm:445
#, fuzzy, c-format
-msgid "France"
-msgstr "ฝรั่งเศษ"
+msgid "Loading from floppy"
+msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
-#: ../../standalone/drakperm:1
+#: install_steps_interactive.pm:450
+#, fuzzy, c-format
+msgid "Insert a floppy containing package selection"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+
+#: install_steps_interactive.pm:533
#, c-format
-msgid "browse"
+msgid ""
+"Due to incompatibilities of the 2.6 series kernel with the LSB runtime\n"
+"tests, the 2.4 series kernel will be installed as the default to insure\n"
+"compliance under the \"LSB\" group selection."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: install_steps_interactive.pm:540
#, c-format
-msgid "Checking installed software..."
+msgid "Selected size is larger than available space"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "ชื่อโฮสต์รีโมท"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
-
-#: ../../lang.pm:1
+#: install_steps_interactive.pm:555
#, c-format
-msgid "Turkey"
+msgid "Type of install"
msgstr ""
-#: ../../network/adsl.pm:1
+#: install_steps_interactive.pm:556
#, c-format
-msgid "Alcatel speedtouch usb"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 buttons"
+#: install_steps_interactive.pm:560
+#, c-format
+msgid "With basic documentation (recommended!)"
+msgstr ""
-#: ../../keyboard.pm:1
+#: install_steps_interactive.pm:561
#, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"numeric row\" QWERTY"
+msgid "Truly minimal install (especially no urpmi)"
+msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Module"
-msgstr "Mouse"
+#: install_steps_interactive.pm:604 standalone/drakxtv:53
+#, c-format
+msgid "All"
+msgstr "ทั้งหมด"
-#: ../../printer/printerdrake.pm:1
+#: install_steps_interactive.pm:648
#, c-format
msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
msgstr ""
+"ถ้าคุณมี CD ทุกอย่าง กด OK\n"
+"ถ้าไม่มีเลย กด ยกเลิก (cancel)\n"
+"ถ้ามีแค่บางแผ่น เลือกเท่าที่มีแล้วกด OK"
-#: ../../install_steps_interactive.pm:1
+#: install_steps_interactive.pm:653
#, c-format
-msgid "Hardware"
-msgstr ""
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom labeled \"%s\""
-#: ../../keyboard.pm:1
+#: install_steps_interactive.pm:673
#, c-format
-msgid "Ctrl and Alt keys simultaneously"
+msgid "Preparing installation"
+msgstr "กำลังเตรียมการติดตั้ง"
+
+#: install_steps_interactive.pm:682
+#, c-format
+msgid ""
+"Installing package %s\n"
+"%d%%"
msgstr ""
+"กำลังติดตั้งแพ็คเก็จ %s\n"
+"%d%%"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: install_steps_interactive.pm:728
#, c-format
-msgid "United States"
-msgstr "สหรัฐอเมริกา"
+msgid "Post-install configuration"
+msgstr "การคอนฟิกหลังการติดตั้ง"
-#: ../../security/l10n.pm:1
+#: install_steps_interactive.pm:734
#, fuzzy, c-format
-msgid "User umask"
-msgstr "ชื่อผู้ใช้"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
-#: ../../any.pm:1
+#: install_steps_interactive.pm:740
+#, fuzzy, c-format
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "
+
+#: install_steps_interactive.pm:761
#, c-format
-msgid "Default OS?"
-msgstr "Default OS?"
+msgid ""
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
+msgstr ""
+
+#: install_steps_interactive.pm:782
+#, fuzzy, c-format
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"
-#: ../../keyboard.pm:1
+#: install_steps_interactive.pm:786
#, c-format
-msgid "Swiss (German layout)"
-msgstr "สวิส (เลย์เอ้าท์ตามเยอรมัน)"
+msgid "Choose a mirror from which to get the packages"
+msgstr "เลือกมิลเรอร์ไซต์ที่จะใช้ในการดาวน์โหลดแพ็คเก็จ"
-#: ../../Xconfig/card.pm:1
+#: install_steps_interactive.pm:800
#, c-format
-msgid "Configure all heads independently"
-msgstr "Configure all heads independently"
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"
+
+#: install_steps_interactive.pm:804
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "ไม่สามารถ forkได้.%s"
-#: ../../printer/printerdrake.pm:1
+#: install_steps_interactive.pm:804
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"
+
+#: install_steps_interactive.pm:830 standalone/drakclock:42
#, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "Which is your timezone?"
+msgstr "คุณใช้ย่านเวลาใด? "
+
+#: install_steps_interactive.pm:835
+#, c-format
+msgid "Automatic time synchronization (using NTP)"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: install_steps_interactive.pm:843
#, fuzzy, c-format
msgid "NTP Server"
msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../security/l10n.pm:1
+#: install_steps_interactive.pm:885 steps.pm:30
#, c-format
-msgid "Sulogin(8) in single user level"
-msgstr ""
+msgid "Summary"
+msgstr "รวมความ"
-#: ../../install_steps_gtk.pm:1
+#: install_steps_interactive.pm:898 install_steps_interactive.pm:906
+#: install_steps_interactive.pm:920 install_steps_interactive.pm:927
+#: install_steps_interactive.pm:1076 services.pm:135
+#: standalone/drakbackup:1937
#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
+msgid "System"
+msgstr "System mode"
-#: ../../standalone/draksplash:1
+#: install_steps_interactive.pm:934 install_steps_interactive.pm:961
+#: install_steps_interactive.pm:978 install_steps_interactive.pm:994
+#: install_steps_interactive.pm:1005
#, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Hardware"
msgstr ""
-#: ../../pkgs.pm:1
+#: install_steps_interactive.pm:940 install_steps_interactive.pm:949
#, c-format
-msgid "nice"
-msgstr "ดี"
-
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d วินาที"
+msgid "Remote CUPS server"
+msgstr "Remote CUPS server"
-#: ../../network/modem.pm:1
+#: install_steps_interactive.pm:940
#, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid "No printer"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../standalone/drakperm:1
+#: install_steps_interactive.pm:982
#, fuzzy, c-format
-msgid "Property"
-msgstr "Port"
+msgid "Do you have an ISA sound card?"
+msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
-#: ../../standalone/drakfont:1
+#: install_steps_interactive.pm:984
#, c-format
-msgid "Ghostscript"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: install_steps_interactive.pm:986
#, c-format
-msgid "LAN Configuration"
-msgstr "การปรับแต่ง LAN"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "Ghana"
+msgid "No sound card detected. Try \"harddrake\" after installation"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: install_steps_interactive.pm:1006
+#, fuzzy, c-format
+msgid "Graphical interface"
+msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
+
+#: install_steps_interactive.pm:1012 install_steps_interactive.pm:1027
+#, fuzzy, c-format
+msgid "Network & Internet"
+msgstr "Network interface"
+
+#: install_steps_interactive.pm:1028
+#, fuzzy, c-format
+msgid "Proxies"
+msgstr "Profile: "
+
+#: install_steps_interactive.pm:1029
+#, fuzzy, c-format
+msgid "configured"
+msgstr "คอนฟิกใหม่"
+
+#: install_steps_interactive.pm:1038 install_steps_interactive.pm:1052
+#: steps.pm:20
#, c-format
-msgid "Path or Module required"
-msgstr ""
+msgid "Security"
+msgstr "ระบบความป้องกัน"
-#: ../../standalone/drakfont:1
+#: install_steps_interactive.pm:1057
#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "การปรับแต่ง LAN"
+msgid "activated"
+msgstr "แอ็คทีฟ"
-#: ../../standalone/drakbackup:1
+#: install_steps_interactive.pm:1057
#, fuzzy, c-format
-msgid "View Configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "disabled"
+msgstr "disable"
+
+#: install_steps_interactive.pm:1066
+#, fuzzy, c-format
+msgid "Boot"
+msgstr "Root"
-#: ../../standalone/harddrake2:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: install_steps_interactive.pm:1070
+#, fuzzy, c-format
+msgid "%s on %s"
+msgstr "Port"
+
+#: install_steps_interactive.pm:1081 services.pm:177
#, c-format
-msgid "Coma bug"
+msgid "Services: %d activated for %d registered"
msgstr ""
-#: ../../help.pm:1
+#: install_steps_interactive.pm:1091
#, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or by another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"%s\": this option deletes all partitions on the selected hard drive\n"
-"\n"
-" * \"%s\": this option enables you to automatically create ext3 and swap\n"
-"partitions in the free space of your hard drive\n"
-"\n"
-"\"%s\": gives access to additional features:\n"
-"\n"
-" * \"%s\": saves the partition table to a floppy. Useful for later\n"
-"partition-table recovery if necessary. It is strongly recommended that you\n"
-"perform this step.\n"
-"\n"
-" * \"%s\": allows you to restore a previously saved partition table from a\n"
-"floppy disk.\n"
-"\n"
-" * \"%s\": if your partition table is damaged, you can try to recover it\n"
-"using this option. Please be careful and remember that it doesn't always\n"
-"work.\n"
-"\n"
-" * \"%s\": discards all changes and reloads the partition table that was\n"
-"originally on the hard drive.\n"
-"\n"
-" * \"%s\": unchecking this option will force users to manually mount and\n"
-"unmount removable media such as floppies and CD-ROMs.\n"
-"\n"
-" * \"%s\": use this option if you wish to use a wizard to partition your\n"
-"hard drive. This is recommended if you do not have a good understanding of\n"
-"partitioning.\n"
-"\n"
-" * \"%s\": use this option to cancel your changes.\n"
-"\n"
-" * \"%s\": allows additional actions on partitions (type, options, format)\n"
-"and gives more information about the hard drive.\n"
-"\n"
-" * \"%s\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+msgid "You have not configured X. Are you sure you really want this?"
msgstr ""
-#: ../../help.pm:1
+#: install_steps_interactive.pm:1149
#, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-" The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then asked to choose the server that best\n"
-"suits your needs."
+msgid "Set root password and network authentication methods"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: install_steps_interactive.pm:1150
#, c-format
-msgid "There was an error installing packages:"
-msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"
+msgid "Set root password"
+msgstr "เซ็ตรหัสผ่านรูท"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "การคอนฟิก Internet"
+#: install_steps_interactive.pm:1160
+#, c-format
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
-#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#: install_steps_interactive.pm:1165 network/netconnect.pm:492
+#: standalone/drakauth:26 standalone/drakconnect:428
+#: standalone/drakconnect:917
#, c-format
-msgid "Undo"
-msgstr "ยกเลิก"
+msgid "Authentication"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "บันทึกตารางพาร์ติชั่น"
+#: install_steps_interactive.pm:1196
+#, c-format
+msgid "Preparing bootloader..."
+msgstr "กำลังเตรียมบูตโหลดเดอร์"
-#: ../../keyboard.pm:1
+#: install_steps_interactive.pm:1206
#, c-format
-msgid "Finnish"
-msgstr "ฟินแลนด์"
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
+msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Macedonia"
-msgstr "Macedonian"
+#: install_steps_interactive.pm:1212
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "คุณต้องการใช้ aboot หรือไม่"
-#: ../../any.pm:1
+#: install_steps_interactive.pm:1215
#, c-format
msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
msgstr ""
+"การติดตั้ง aboot ล้มเหลว\n"
+"พยายามติดตั้งถึงแม้พาติชั่นแรกอาจจะเสียหาย?"
-#: ../../keyboard.pm:1
+#: install_steps_interactive.pm:1226
+#, fuzzy, c-format
+msgid "Installing bootloader"
+msgstr "ติดตั้งบูตโหลดเดอร์"
+
+#: install_steps_interactive.pm:1233
#, c-format
-msgid "Slovenian"
-msgstr "สโลวาเนีย"
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "การติดตั้ง bootloader ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
-#: ../../security/help.pm:1
+#: install_steps_interactive.pm:1238
#, c-format
msgid ""
-"Authorize:\n"
-"\n"
-"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
-"set to \"ALL\",\n"
-"\n"
-"- only local ones if set to \"LOCAL\"\n"
-"\n"
-"- none if set to \"NONE\".\n"
-"\n"
-"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
-"(5))."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader. If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
msgstr ""
-#: ../../lang.pm:1
+#: install_steps_interactive.pm:1251
#, c-format
-msgid "Libya"
+msgid ""
+"In this security level, access to the files in the Windows partition is "
+"restricted to the administrator."
msgstr ""
-#: ../../standalone/drakgw:1
+#: install_steps_interactive.pm:1283 standalone/drakautoinst:75
#, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "กำลังปรับแต่ง scripts ติดตั้งโปรแกรม และเริ่มทำงาน servers..."
+msgid "Insert a blank floppy in drive %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port #%s"
-msgstr "ชื่อของเครื่องพิมพ์"
+#: install_steps_interactive.pm:1287
+#, c-format
+msgid "Creating auto install floppy..."
+msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
-#: ../../standalone/drakbackup:1
+#: install_steps_interactive.pm:1298
#, c-format
msgid ""
+"Some steps are not completed.\n"
"\n"
-"- Burn to CD"
+"Do you really want to quit now?"
msgstr ""
+"ขั้นตอนบางขั้นตอนไม่สมบูรณ์\n"
+"\n"
+"คุณต้องการออกจากการติดตั้งจริงๆหรือไม่?"
-#: ../../any.pm:1
+#: install_steps_interactive.pm:1313
#, c-format
-msgid "Table"
-msgstr "Table"
+msgid "Generate auto install floppy"
+msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"
-#: ../../fs.pm:1
+#: install_steps_interactive.pm:1315
#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ไม่ทราบว่าจะฟอร์แมต %s เป็นชนิด %s ได้อย่างไร"
-
-#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "Mouse"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "USB printer #%s"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
+msgstr ""
+"การติดตั้งแบบออโตเมติกสามารถทำงานแบบเต็มรูปแบบหากต้องการ\n"
+"ในกรณีนั้นมันจะใช้ harddisk ทั้งหมด\n"
+"(มันเหมาะกับการติดตั้งบนเครื่องอื่น)\n"
+"คุณอาจอยากกลับไปเริ่มต้นติดตั้งใหม่\n"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+#: install_steps_newt.pm:20
+#, c-format
+msgid "Mandrake Linux Installation %s"
+msgstr "การติดตั้งลีนุกซ์-แมนเดรก %s"
-#: ../../standalone/drakboot:1
+#: install_steps_newt.pm:33
#, c-format
msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
+msgstr " <Tab>/<Alt-Tab> ระหว่างตัวเลือก | <Space> เลือก | <F12> หน้าถัดไป "
-#: ../../harddrake/data.pm:1
+#: interactive.pm:170
#, fuzzy, c-format
-msgid "Modem"
-msgstr "Mouse"
+msgid "Choose a file"
+msgstr "เลือกกิจกรรม"
-#: ../../lang.pm:1
+#: interactive.pm:372
#, c-format
-msgid "Tuvalu"
+msgid "Basic"
msgstr ""
-#: ../../help.pm:1 ../../network/netconnect.pm:1
+#: interactive.pm:403 interactive/newt.pm:308 ugtk2.pm:509
#, c-format
-msgid "Use auto detection"
-msgstr "ใช้ auto detection"
+msgid "Finish"
+msgstr "เสร็จแล้ว"
-#: ../../services.pm:1
+#: interactive/newt.pm:83
+#, fuzzy, c-format
+msgid "Do"
+msgstr "ทำเรียบร้อยแล้ว"
+
+#: interactive/stdio.pm:29 interactive/stdio.pm:148
#, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ทำให้สามารถใช้ mouse กับโปรแกรมที่รันใน text mode\n"
-"มันยังช่วยทำให้สามารถใช้ cut-and-paste และ popup-menu \n"
-"ด้วย"
+msgid "Bad choice, try again\n"
+msgstr "ตัวเลือกผิดพลาด โปรดทดลองอีกครั้ง\n"
-#: ../../standalone/drakconnect:1
+#: interactive/stdio.pm:30 interactive/stdio.pm:149
#, c-format
-msgid "Started on boot"
-msgstr "เริ่มทำงานตอน boot"
+msgid "Your choice? (default %s) "
+msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
-#: ../advertising/12-mdkexpert.pl:1
+#: interactive/stdio.pm:54
#, c-format
msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"Entries you'll have to fill:\n"
+"%s"
msgstr ""
-#: ../../security/l10n.pm:1
+#: interactive/stdio.pm:70
#, fuzzy, c-format
-msgid "No password aging for"
-msgstr "ไม่มีรหัสผ่าน"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
-#: ../../standalone/draksec:1
-#, c-format
-msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
-msgstr ""
+#: interactive/stdio.pm:94
+#, fuzzy, c-format
+msgid "Button `%s': %s"
+msgstr "พาร์ติชั่น %s"
-#: ../../printer/printerdrake.pm:1
+#: interactive/stdio.pm:95
+#, fuzzy, c-format
+msgid "Do you want to click on this button?"
+msgstr "คุณต้องการใช้ aboot หรือไม่"
+
+#: interactive/stdio.pm:104
+#, fuzzy, c-format
+msgid "Your choice? (default `%s'%s) "
+msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
+
+#: interactive/stdio.pm:104
#, c-format
-msgid "Automatically find available printers on remote machines"
+msgid " enter `void' for void entry"
msgstr ""
-#: ../../lang.pm:1
+#: interactive/stdio.pm:122
#, c-format
-msgid "East Timor"
+msgid "=> There are many things to choose from (%s).\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: interactive/stdio.pm:125
#, c-format
-msgid "On Tape Device"
+msgid ""
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
msgstr ""
-#: ../../standalone/drakbackup:1
+#: interactive/stdio.pm:138
#, c-format
msgid ""
-"\n"
-"- Save to Tape on device: %s"
+"=> Notice, a label changed:\n"
+"%s"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Login name"
-msgstr "ชื่อโดเมน"
-
-#: ../../security/l10n.pm:1
+#: interactive/stdio.pm:145
#, c-format
-msgid "Report unowned files"
+msgid "Re-submit"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: keyboard.pm:137 keyboard.pm:169
#, c-format
-msgid "Del profile..."
-msgstr "ลบ profile..."
+msgid "Czech (QWERTZ)"
+msgstr "เชคโกสโลวาเกีย (QWERTZ)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+#: keyboard.pm:138 keyboard.pm:171
+#, c-format
+msgid "German"
+msgstr "เยอรมัน"
-#: ../../standalone/XFdrake:1
+#: keyboard.pm:139
#, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "กรุณาออกไปและใช้ Ctrl-Alt-BackSpace"
+msgid "Dvorak"
+msgstr "Dvorak"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "ค้นพบ %s"
+#: keyboard.pm:140 keyboard.pm:179
+#, c-format
+msgid "Spanish"
+msgstr "สเปน"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
+#: keyboard.pm:141 keyboard.pm:180
+#, c-format
+msgid "Finnish"
+msgstr "ฟินแลนด์"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "เลือกกลุ่มแพ็คเก็จ"
+#: keyboard.pm:142 keyboard.pm:181
+#, c-format
+msgid "French"
+msgstr "ฝรั่งเศษ"
-#: ../../standalone/drakboot:1
+#: keyboard.pm:143 keyboard.pm:217
#, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
-msgstr ""
+msgid "Norwegian"
+msgstr "นอร์เวย์"
-#: ../../printer/printerdrake.pm:1
+#: keyboard.pm:144
#, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Polish"
+msgstr "โปแลนด์"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "StarOffice"
-msgstr "ดี"
+#: keyboard.pm:145 keyboard.pm:226
+#, c-format
+msgid "Russian"
+msgstr "รัสเซีย"
-#: ../../standalone/drakboot:1
+#: keyboard.pm:147 keyboard.pm:230
#, c-format
-msgid "No, I don't want autologin"
-msgstr "ไม่ต้องการ autologin"
+msgid "Swedish"
+msgstr "สวีเดน"
-#: ../../standalone/drakbug:1
+#: keyboard.pm:148 keyboard.pm:249
#, c-format
-msgid "Windows Migration tool"
-msgstr ""
+msgid "UK keyboard"
+msgstr "อังกฤษ"
-#: ../../any.pm:1 ../../help.pm:1
-#, fuzzy, c-format
-msgid "All languages"
-msgstr "เลือกภาษาที่คุณใช้"
+#: keyboard.pm:149 keyboard.pm:250
+#, c-format
+msgid "US keyboard"
+msgstr "อเมริกา"
-#: ../../diskdrake/interactive.pm:1
+#: keyboard.pm:151
#, fuzzy, c-format
-msgid "Removing %s"
-msgstr "ความละเอียดของภาพ %s\n"
+msgid "Albanian"
+msgstr "Iranian"
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "%s not found...\n"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+#: keyboard.pm:152
+#, c-format
+msgid "Armenian (old)"
+msgstr "อาร์เมเนียน (เก่า)"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: keyboard.pm:153
#, c-format
-msgid "Testing your connection..."
-msgstr "ทดสอบ connection..."
+msgid "Armenian (typewriter)"
+msgstr "อาร์เมเนียน (พิมพ์ดีด)"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cache size"
-msgstr "ขนาดของ chunk"
+#: keyboard.pm:154
+#, c-format
+msgid "Armenian (phonetic)"
+msgstr "อาร์เมเนียน (โฟเนติค)"
-#: ../../security/level.pm:1
+#: keyboard.pm:155
#, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Arabic"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: keyboard.pm:156
#, c-format
-msgid "Start sector: "
-msgstr "เริ่มเซ็กเตอร์: "
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjani (latin)"
-#: ../../lang.pm:1
+#: keyboard.pm:158
#, c-format
-msgid "Congo (Brazzaville)"
-msgstr ""
+msgid "Belgian"
+msgstr "เบลเยี่ยม"
-#: ../../standalone/drakperm:1
+#: keyboard.pm:159
#, fuzzy, c-format
-msgid "Read"
-msgstr "เรียกอีกครั้ง"
+msgid "Bengali"
+msgstr "enable"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: keyboard.pm:160
#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
-msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
+msgid "Bulgarian (phonetic)"
+msgstr "อาร์เมเนียน (โฟเนติค)"
-#: ../../lang.pm:1
+#: keyboard.pm:161
#, fuzzy, c-format
-msgid "Seychelles"
-msgstr "เชลล์ที่ใช้"
+msgid "Bulgarian (BDS)"
+msgstr "บัลกาเรีย"
-#: ../../printer/printerdrake.pm:1
+#: keyboard.pm:162
#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "บราซิล"
-#: ../../standalone/drakbackup:1
+#: keyboard.pm:165
#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "ไม่มีรหัสผ่าน"
+msgid "Bosnian"
+msgstr "Estonian"
-#: ../../printer/printerdrake.pm:1
+#: keyboard.pm:166
#, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
-msgstr ""
+msgid "Belarusian"
+msgstr "Belarusian"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Right Control key"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+#: keyboard.pm:167
+#, c-format
+msgid "Swiss (German layout)"
+msgstr "สวิส (เลย์เอ้าท์ตามเยอรมัน)"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"Insert a FAT formatted floppy in drive %s with %s in root directory and "
-"press %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"
+#: keyboard.pm:168
+#, c-format
+msgid "Swiss (French layout)"
+msgstr "สวิส (เลย์เอ้าท์ตามฝรั่งเศษ)"
-#: ../../lang.pm:1
+#: keyboard.pm:170
#, c-format
-msgid "Zambia"
-msgstr ""
+msgid "Czech (QWERTY)"
+msgstr "เชคโกสโลวาเกีย (QWERTY)"
-#: ../../security/level.pm:1
+#: keyboard.pm:172
#, c-format
-msgid "Security Administrator (login or email)"
-msgstr ""
+msgid "German (no dead keys)"
+msgstr "German (no dead keys)"
-#: ../../standalone/drakgw:1
+#: keyboard.pm:173
#, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Devanagari"
msgstr ""
-#: ../../keyboard.pm:1
+#: keyboard.pm:174
#, c-format
-msgid "Romanian (qwerty)"
-msgstr ""
+msgid "Danish"
+msgstr "เดนมาร์ก"
-#: ../../standalone/drakbackup:1
+#: keyboard.pm:175
#, c-format
-msgid "Under Devel ... please wait."
-msgstr ""
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
+
+#: keyboard.pm:176
+#, c-format
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norwegian)"
-#: ../../lang.pm:1
+#: keyboard.pm:177
#, fuzzy, c-format
-msgid "Egypt"
-msgstr "ว่าง"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (US)"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: keyboard.pm:178
#, c-format
-msgid "Czech Republic"
-msgstr "สาธารณรัฐเช็ค"
+msgid "Estonian"
+msgstr "Estonian"
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: keyboard.pm:182
#, c-format
-msgid "Sound card"
-msgstr "Sound card"
+msgid "Georgian (\"Russian\" layout)"
+msgstr "จอร์เจีย (เลย์เอ้าท์แบบรัสเซีย)"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "ฟอร์แมตพาร์ติชั่น"
+#: keyboard.pm:183
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "จอร์เจีย (เลย์เอ้าท์แบบละติน)"
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+#: keyboard.pm:184
+#, c-format
+msgid "Greek"
+msgstr "กรีก"
+
+#: keyboard.pm:185
+#, c-format
+msgid "Greek (polytonic)"
msgstr ""
-"ถ้าคุณมี พาร์ติชั่น FAT ที่ใหญ่ พาร์ติชั่น เดียว\n"
-"(ซึ่งโดยปกติ Microsoft Dos/Windows ใข้)\n"
-"ผมแนะนำให้คุณปรับขนาด พาร์ติชั่น เสียก่อน\n"
-"(กดที่มันแล้วกด \"ปรับขนาด\")"
-#: ../../standalone/drakfont:1
+#: keyboard.pm:186
#, c-format
-msgid "Suppress Temporary Files"
+msgid "Gujarati"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"\n"
+#: keyboard.pm:187
+#, c-format
+msgid "Gurmukhi"
msgstr ""
-"การปรับแต่ง internet/network เรียบร้อยแล้ว\n"
-"\n"
-"ค่าต่างๆจะถูกนำไปใช้เดี๋ยวนี้\n"
-#: ../../diskdrake/interactive.pm:1
+#: keyboard.pm:188
#, c-format
-msgid "Change partition type"
-msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+msgid "Hungarian"
+msgstr "อังการี"
-#: ../../help.pm:1
+#: keyboard.pm:189
#, c-format
-msgid ""
-"Resolution\n"
-"\n"
-" Here you can choose the resolutions and color depths available for your\n"
-"hardware. Choose the one that best suits your needs (you will be able to\n"
-"change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "Croatian"
+msgstr "Croatian"
+
+#: keyboard.pm:190
+#, c-format
+msgid "Irish"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Network Options"
-msgstr "อ๊อปชั่นของโมดูล:"
+#: keyboard.pm:191
+#, c-format
+msgid "Israeli"
+msgstr "อิสราเอล"
-#: ../../security/l10n.pm:1
+#: keyboard.pm:192
#, c-format
-msgid "Enable msec hourly security check"
-msgstr ""
+msgid "Israeli (Phonetic)"
+msgstr "อิลราเอล (โฟเนติค)"
-#: ../../standalone/drakboot:1
+#: keyboard.pm:193
#, c-format
-msgid ""
-"Display theme\n"
-"under console"
-msgstr ""
+msgid "Iranian"
+msgstr "Iranian"
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(โมดูล %s)"
+#: keyboard.pm:194
+#, c-format
+msgid "Icelandic"
+msgstr "ไอซ์แลนด์"
-#: ../../mouse.pm:1
+#: keyboard.pm:195
#, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid "Italian"
+msgstr "อิตาลี"
-#: ../../security/level.pm:1
+#: keyboard.pm:196
#, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
+msgid "Inuktitut"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: keyboard.pm:197
#, c-format
-msgid "average"
-msgstr ""
+msgid "Japanese 106 keys"
+msgstr "Japanese 106 keys"
-#: ../../printer/printerdrake.pm:1
+#: keyboard.pm:198
#, fuzzy, c-format
-msgid "New printer name"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Kannada"
+msgstr "ปฎิทิน"
-#: ../../fs.pm:1
+#: keyboard.pm:201
#, c-format
-msgid ""
-"Allow an ordinary user to mount the file system. The\n"
-"name of the mounting user is written to mtab so that he can unmount the "
-"file\n"
-"system again. This option implies the options noexec, nosuid, and nodev\n"
-"(unless overridden by subsequent options, as in the option line\n"
-"user,exec,dev,suid )."
-msgstr ""
+msgid "Korean keyboard"
+msgstr "Korean keyboard"
-#: ../../lang.pm:1
+#: keyboard.pm:202
#, c-format
-msgid "Equatorial Guinea"
-msgstr ""
+msgid "Latin American"
+msgstr "ละตินอเมริกา"
-#: ../../standalone/drakbackup:1
+#: keyboard.pm:203
#, fuzzy, c-format
-msgid "Backup System"
-msgstr "เซ็ตอัพระบบไฟล์"
+msgid "Laotian"
+msgstr "ตำแหน่ง"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: keyboard.pm:204
+#, c-format
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lithuanian AZERTY (old)"
-#: ../../printer/printerdrake.pm:1
+#: keyboard.pm:206
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
-msgstr ""
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lithuanian AZERTY (new)"
-#: ../../printer/printerdrake.pm:1
+#: keyboard.pm:207
#, c-format
-msgid "Currently, no alternative possibility is available"
-msgstr ""
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "ลิธัวเนีย \"แถวตัวเลข\" QWERTY"
-#: ../../keyboard.pm:1
+#: keyboard.pm:208
#, c-format
-msgid "Romanian (qwertz)"
-msgstr ""
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "ลิธัวเนีย \"โฟเนติค\" QWERTY"
-#: ../../standalone/drakTermServ:1
+#: keyboard.pm:209
#, fuzzy, c-format
-msgid "Write Config"
-msgstr "คอนฟิกใหม่"
+msgid "Latvian"
+msgstr "ตำแหน่ง"
-#: ../../services.pm:1
+#: keyboard.pm:210
#, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
+msgid "Malayalam"
msgstr ""
-#: ../../lang.pm:1
+#: keyboard.pm:211
#, c-format
-msgid "Kiribati"
+msgid "Macedonian"
+msgstr "Macedonian"
+
+#: keyboard.pm:212
+#, c-format
+msgid "Myanmar (Burmese)"
msgstr ""
-#: ../../mouse.pm:1
+#: keyboard.pm:213
#, fuzzy, c-format
-msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
-msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"
+msgid "Mongolian (cyrillic)"
+msgstr "Azerbaidjani (cyrillic)"
-#: ../../standalone/drakbackup:1
+#: keyboard.pm:214
#, c-format
-msgid "Other (not drakbackup) keys in place already"
+msgid "Maltese (UK)"
msgstr ""
-#: ../../help.pm:1
+#: keyboard.pm:215
#, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented with a list of different parameters to change to get\n"
-"an optimal graphical display: Graphic Card\n"
-"\n"
-" The installer will normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose from this list the card you actually have installed.\n"
-"\n"
-" In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then asked to choose the server that best\n"
-"suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-" The installer will normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is incorrect, you can choose from\n"
-"this list the monitor you actually have connected to your computer.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-" Here you can choose the resolutions and color depths available for your\n"
-"hardware. Choose the one that best suits your needs (you will be able to\n"
-"change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-" the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"%s\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-" Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"%s\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+msgid "Maltese (US)"
msgstr ""
-#: ../../standalone/draksplash:1
+#: keyboard.pm:216
#, c-format
-msgid "Browse"
-msgstr ""
+msgid "Dutch"
+msgstr "ฮอลแลนด์"
-#: ../../harddrake/data.pm:1
+#: keyboard.pm:218
#, c-format
-msgid "CDROM"
+msgid "Oriya"
msgstr ""
-#: ../../network/tools.pm:1
+#: keyboard.pm:219
#, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "คุณต้องการทดสอบต่อเข้า Internet เดี๋ยวนี้หรือไม่"
+msgid "Polish (qwerty layout)"
+msgstr "Polish (qwerty layout)"
-#: ../../keyboard.pm:1
+#: keyboard.pm:220
#, c-format
-msgid "Belgian"
-msgstr "เบลเยี่ยม"
+msgid "Polish (qwertz layout)"
+msgstr "Polish (qwertz layout)"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
+#: keyboard.pm:221
+#, c-format
+msgid "Portuguese"
+msgstr "โปรตุเกส"
-#: ../../network/ethernet.pm:1
+#: keyboard.pm:222
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+msgid "Canadian (Quebec)"
+msgstr "คานาดา (ควิเบค)"
+
+#: keyboard.pm:224
+#, c-format
+msgid "Romanian (qwertz)"
msgstr ""
-"ไม่พบการ์ด ethernet \n"
-"ผมไม่สามารถจัดทำการติดต่อชนิดนี้"
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Windows"
-msgstr "โดเมน NIS"
+#: keyboard.pm:225
+#, c-format
+msgid "Romanian (qwerty)"
+msgstr ""
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
+#: keyboard.pm:227
+#, c-format
+msgid "Russian (Phonetic)"
+msgstr "รัสเซีย (โฟเนติค)"
-#: ../../standalone/drakbackup:1
+#: keyboard.pm:228
#, fuzzy, c-format
-msgid "Host Name"
-msgstr "ชื่อโฮสต์:"
+msgid "Saami (norwegian)"
+msgstr "Dvorak (Norwegian)"
-#: ../../standalone/logdrake:1
+#: keyboard.pm:229
#, c-format
-msgid "/File/Save _As"
-msgstr "/ไฟล์/บันทึก_เป็น"
+msgid "Saami (swedish/finnish)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: keyboard.pm:231
#, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
-msgstr ""
+msgid "Slovenian"
+msgstr "สโลวาเนีย"
-#: ../../standalone/scannerdrake:1
+#: keyboard.pm:232
#, c-format
-msgid "%s is not in the scanner database, configure it manually?"
-msgstr ""
+msgid "Slovakian (QWERTZ)"
+msgstr "สโลวาเกีย (QWERTZ)"
-#: ../../any.pm:1
+#: keyboard.pm:233
#, c-format
-msgid "Delay before booting default image"
-msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"
+msgid "Slovakian (QWERTY)"
+msgstr "สโลวาเกีย (QWERTY)"
+
+#: keyboard.pm:235
+#, fuzzy, c-format
+msgid "Serbian (cyrillic)"
+msgstr "Azerbaidjani (cyrillic)"
+
+#: keyboard.pm:236
+#, fuzzy, c-format
+msgid "Syriac"
+msgstr "พอร์ตอนุกรม"
+
+#: keyboard.pm:237
+#, fuzzy, c-format
+msgid "Syriac (phonetic)"
+msgstr "อาร์เมเนียน (โฟเนติค)"
+
+#: keyboard.pm:238
+#, fuzzy, c-format
+msgid "Telugu"
+msgstr "เบลเยี่ยม"
-#: ../../any.pm:1
+#: keyboard.pm:240
#, c-format
-msgid "Restrict command line options"
-msgstr "อ็อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์"
+msgid "Tamil (ISCII-layout)"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: keyboard.pm:241
#, fuzzy, c-format
-msgid "East Europe"
-msgstr "ยุโรป"
+msgid "Tamil (Typewriter-layout)"
+msgstr "อาร์เมเนียน (พิมพ์ดีด)"
-#: ../../help.pm:1 ../../install_interactive.pm:1
+#: keyboard.pm:242
#, c-format
-msgid "Use free space"
-msgstr "ใช้พื้นที่ที่ว่าง"
+msgid "Thai keyboard"
+msgstr "ไทย"
+
+#: keyboard.pm:244
+#, fuzzy, c-format
+msgid "Tajik keyboard"
+msgstr "ไทย"
-#: ../../network/adsl.pm:1
+#: keyboard.pm:245
#, c-format
-msgid "use dhcp"
-msgstr "ใช้ dhcp"
+msgid "Turkish (traditional \"F\" model)"
+msgstr "ตุรกี (โมเดลแบบแผน \"F\")"
-#: ../../standalone/logdrake:1
+#: keyboard.pm:246
#, c-format
-msgid "Mail alert"
-msgstr ""
+msgid "Turkish (modern \"Q\" model)"
+msgstr "ตุรกี (โมเดลสมัยใหม่ \"Q\")"
-#: ../../network/tools.pm:1
+#: keyboard.pm:248
#, c-format
-msgid "Internet configuration"
-msgstr "การคอนฟิก Internet"
+msgid "Ukrainian"
+msgstr "ยูเครน"
-#: ../../lang.pm:1
+#: keyboard.pm:251
#, c-format
-msgid "Uzbekistan"
-msgstr ""
+msgid "US keyboard (international)"
+msgstr "คีย์บอร์ดอเมริกัน (นานาชาติ)"
-#: ../../printer/printerdrake.pm:1
+#: keyboard.pm:252
#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "ค้นพบ %s"
+msgid "Uzbek (cyrillic)"
+msgstr "Azerbaidjani (cyrillic)"
-#: ../../standalone/harddrake2:1
+#: keyboard.pm:253
+#, c-format
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamese \"numeric row\" QWERTY"
+
+#: keyboard.pm:254
#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "ใช้ auto detection"
+msgid "Yugoslavian (latin)"
+msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"
-#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: keyboard.pm:261
#, c-format
-msgid "Finish"
-msgstr "เสร็จแล้ว"
+msgid "Right Alt key"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: keyboard.pm:262
#, c-format
-msgid "Show automatically selected packages"
+msgid "Both Shift keys simultaneously"
msgstr ""
-#: ../../lang.pm:1
+#: keyboard.pm:263
#, c-format
-msgid "Togo"
+msgid "Control and Shift keys simultaneously"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: keyboard.pm:264
#, c-format
-msgid "CPU flags reported by the kernel"
+msgid "CapsLock key"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: keyboard.pm:265
#, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid "Ctrl and Alt keys simultaneously"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: keyboard.pm:266
#, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Alt and Shift keys simultaneously"
+msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
+#: keyboard.pm:267
#, c-format
-msgid "Please try again"
-msgstr "โปรดลองอีกครั้ง"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The model is correct"
-msgstr "ถูกต้องหรือไม่?"
+msgid "\"Menu\" key"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: keyboard.pm:268
#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "การกำหนดขนาด FAT เกิดการผิดพลาด: %s"
+msgid "Left \"Windows\" key"
+msgstr ""
-#: ../../help.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1
+#: keyboard.pm:269
#, c-format
-msgid "Individual package selection"
-msgstr "Individual package selection"
+msgid "Right \"Windows\" key"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: keyboard.pm:270
#, c-format
-msgid "This partition is not resizeable"
-msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"
+msgid "Both Control keys simultaneously"
+msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
+#: keyboard.pm:271
#, c-format
-msgid "Location"
-msgstr "ตำแหน่ง"
+msgid "Both Alt keys simultaneously"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: keyboard.pm:272
#, c-format
-msgid "USA (cable-hrc)"
+msgid "Left Shift key"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guatemala"
-msgstr "เกตเวย์"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "การเม้าท์ล้มเหลว"
+#: keyboard.pm:273
+#, c-format
+msgid "Right Shift key"
+msgstr ""
-#: ../../security/l10n.pm:1
+#: keyboard.pm:274
#, c-format
-msgid "Ethernet cards promiscuity check"
+msgid "Left Alt key"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: keyboard.pm:275
#, fuzzy, c-format
-msgid "This machine"
-msgstr "matching"
+msgid "Left Control key"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "อักษรไดรว์แบบดอส: %s (เป็นการคาดเดา)\n"
+#: keyboard.pm:276
+#, fuzzy, c-format
+msgid "Right Control key"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../lang.pm:1
+#: keyboard.pm:307
#, c-format
-msgid "Bahrain"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: keyboard.pm:312
#, c-format
-msgid "Select the files or directories and click on 'OK'"
+msgid ""
+"This setting will be activated after the installation.\n"
+"During installation, you will need to use the Right Control\n"
+"key to switch between the different keyboard layouts."
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: lang.pm:144
#, c-format
-msgid "omit scsi modules"
-msgstr "ยกเว้น scsi modules"
+msgid "default:LTR"
+msgstr "default:LTR"
-#: ../../standalone/harddrake2:1
+#: lang.pm:160
+#, fuzzy, c-format
+msgid "Afghanistan"
+msgstr "Iranian"
+
+#: lang.pm:161
+#, fuzzy, c-format
+msgid "Andorra"
+msgstr "ยกเลิก"
+
+#: lang.pm:162
#, c-format
-msgid "family of the cpu (eg: 6 for i686 class)"
+msgid "United Arab Emirates"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: lang.pm:163
#, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "Antigua and Barbuda"
msgstr ""
-"เนื่องจากคุณใช้การติดตั้งแบบ network ระบบ network จึงใช้ได้อยู่แล้ว\n"
-"กด OK เพื่อรักษาค่าคอนฟิกเดิมไว้ หรือเลือก ยกเลิกเพื่อปรับแต่งใหม่\n"
-#: ../../security/l10n.pm:1
+#: lang.pm:164
#, c-format
-msgid "Run the daily security checks"
+msgid "Anguilla"
msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "เลือกชนิดของคีย์บอร์ด: %s\n"
+#: lang.pm:165
+#, fuzzy, c-format
+msgid "Albania"
+msgstr "Iranian"
+
+#: lang.pm:166
+#, fuzzy, c-format
+msgid "Armenia"
+msgstr "อาร์เมเนียน (เก่า)"
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:167
#, c-format
-msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+msgid "Netherlands Antilles"
msgstr ""
-#: ../../keyboard.pm:1
+#: lang.pm:168
#, c-format
-msgid "Maltese (US)"
+msgid "Angola"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: lang.pm:169
#, c-format
-msgid "The creation of the boot floppy has been successfully completed \n"
+msgid "Antarctica"
msgstr ""
-#: ../../services.pm:1
+#: lang.pm:170 standalone/drakxtv:51
#, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid "Argentina"
msgstr ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
-#: ../../standalone/drakconnect:1
+#: lang.pm:171
#, c-format
-msgid "Launch the wizard"
+msgid "American Samoa"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: lang.pm:173 standalone/drakxtv:49
#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV card"
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid "Toggle between normal/expert mode"
-msgstr "สำหรับผู้ชำนาญ > ปกติ"
-
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Size"
-msgstr "ขนาด"
+msgid "Australia"
+msgstr "พอร์ตอนุกรม"
-#: ../../help.pm:1
+#: lang.pm:174
#, fuzzy, c-format
-msgid "GRUB"
-msgstr "GB"
+msgid "Aruba"
+msgstr "Grub"
-#: ../../lang.pm:1
+#: lang.pm:175
#, fuzzy, c-format
-msgid "Greenland"
-msgstr "ไอซ์แลนด์"
+msgid "Azerbaijan"
+msgstr "Iranian"
-#: ../../mouse.pm:1
+#: lang.pm:176
#, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Bosnia and Herzegovina"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:177
#, c-format
-msgid "Thursday"
-msgstr "พฤหัสบดี"
+msgid "Barbados"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:178
#, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
+msgid "Bangladesh"
msgstr ""
-#: ../../standalone/drakgw:1
+#: lang.pm:180
#, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
+msgid "Burkina Faso"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: lang.pm:181
#, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "เลือกไฟล์"
+msgid "Bulgaria"
+msgstr "อังการี"
-#: ../../help.pm:1
+#: lang.pm:182
#, c-format
-msgid ""
-"This dialog allows you to fine tune your bootloader:\n"
-"\n"
-" * \"%s\": there are three choices for your bootloader:\n"
-"\n"
-" * \"%s\": if you prefer grub (text menu).\n"
-"\n"
-" * \"%s\": if you prefer LILO with its text menu interface.\n"
-"\n"
-" * \"%s\": if you prefer LILO with its graphical interface.\n"
-"\n"
-" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
-"you prefer, the bootloader can be installed on the second hard drive\n"
-"(\"%s\"), or even on a floppy disk (\"%s\");\n"
-"\n"
-" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
-"given to the user at the console to select a boot entry other than the\n"
-"default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you are doing before changing any of the\n"
-"options. !!\n"
-"\n"
-"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
-"are normally reserved for the expert user."
+msgid "Bahrain"
msgstr ""
-#: ../../security/help.pm:1
+#: lang.pm:183
#, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "Burundi"
msgstr ""
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree ชนิดใหนที่คุณต้องการมี"
+#: lang.pm:184
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "เบลเยี่ยม"
-#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "More"
+#: lang.pm:185
+#, fuzzy, c-format
+msgid "Bermuda"
+msgstr "เยอรมัน"
-#: ../../standalone/drakbackup:1
+#: lang.pm:186
#, c-format
-msgid ""
-"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -"
-"scanbus' would also show you the device number."
+msgid "Brunei Darussalam"
msgstr ""
-#: ../../security/level.pm:1
+#: lang.pm:187
#, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
+msgid "Bolivia"
msgstr ""
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Server Name"
-msgstr "เซิร์ฟเวอร์"
+#: lang.pm:188
+#, c-format
+msgid "Brazil"
+msgstr "บราซิล"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: lang.pm:189
#, c-format
-msgid "Account Password"
-msgstr "รหัสผ่าน"
+msgid "Bahamas"
+msgstr ""
-#: ../../standalone/drakhelp:1
+#: lang.pm:190
#, c-format
-msgid ""
-"%s cannot be displayed \n"
-". No Help entry of this type\n"
+msgid "Bhutan"
msgstr ""
-#: ../../any.pm:1
+#: lang.pm:191
#, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+msgid "Bouvet Island"
msgstr ""
-#: ../../install_interactive.pm:1
+#: lang.pm:192
#, fuzzy, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful: this\n"
-"operation is dangerous. If you have not already done so, you\n"
-"first need to exit the installation, run \"chkdsk c:\" from a\n"
-"Command Prompt under Windows (beware, running graphical program\n"
-"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n"
-"Command Prompt!), optionally run defrag, then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
-msgstr ""
-"ระวัง!\n"
-"DrakX กำลังจะลดขนาดพาร์ติชั่นของ windows การทำงานนี้อันตลายมาก\n"
-"ถ้าคุณยังไม่เคยทำมาก่อนคุณควรออกจากการทำงานนี้และรัน Scandisk บน\n"
-"Windows (และ defrag) แล้วค่อยเริ่มทำงานนี้ใหม่ และคุณสมควรที่จะทำการ\n"
-"Backup ข้อมูลสำคัญขึ้นมาก่อน\n"
-"เมื่อคุณแน่ใจแล้ว กด OK"
+msgid "Botswana"
+msgstr "Estonian"
-#: ../../keyboard.pm:1
+#: lang.pm:193
#, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "ไทย"
+msgid "Belarus"
+msgstr "Belarusian"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
-msgstr ""
+#: lang.pm:194
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "เปลี่ยนขนาด"
-#: ../../standalone/drakfont:1
+#: lang.pm:195
#, fuzzy, c-format
-msgid "Font List"
-msgstr "กำหนดจุดเม้าท์"
+msgid "Canada"
+msgstr "ปฎิทิน"
-#: ../../install_steps_interactive.pm:1
+#: lang.pm:196
#, c-format
-msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader. If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+msgid "Cocos (Keeling) Islands"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: lang.pm:197
#, c-format
-msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+msgid "Congo (Kinshasa)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: lang.pm:198
#, c-format
-msgid "Select file"
-msgstr "เลือกไฟล์"
+msgid "Central African Republic"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:199
#, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Congo (Brazzaville)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:200
#, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "Switzerland"
msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:201
#, c-format
-msgid "Japan"
-msgstr "ญี่ปุ่น"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print option list"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์"
+msgid "Cote d'Ivoire"
+msgstr ""
-#: ../../standalone/localedrake:1
+#: lang.pm:202
#, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "Cook Islands"
msgstr ""
-#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Country / Region"
-msgstr "ขนาดจอภาพ"
-
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: lang.pm:203
#, fuzzy, c-format
-msgid "Search servers"
-msgstr "เซิร์ฟเวอร์ DNS"
+msgid "Chile"
+msgstr "เลือก file"
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:204
#, c-format
-msgid "NCP queue name missing!"
+msgid "Cameroon"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: lang.pm:205
#, c-format
-msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
+msgid "China"
+msgstr "จีน"
-#: ../../install_steps_interactive.pm:1
+#: lang.pm:206
#, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom labeled \"%s\""
+msgid "Colombia"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:208
#, c-format
-msgid "CDRW media"
+msgid "Cuba"
msgstr ""
-#: ../../services.pm:1
+#: lang.pm:209
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "ยุบ tree"
+
+#: lang.pm:210
#, c-format
-msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+msgid "Christmas Island"
msgstr ""
-#: ../advertising/07-server.pl:1
+#: lang.pm:211
#, c-format
-msgid "Turn your computer into a reliable server"
+msgid "Cyprus"
msgstr ""
-#: ../../security/l10n.pm:1
+#: lang.pm:214
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "เลิก"
+
+#: lang.pm:215
#, c-format
-msgid "Check empty password in /etc/shadow"
+msgid "Denmark"
msgstr ""
-#: ../../network/network.pm:1
-#, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
+#: lang.pm:216
+#, fuzzy, c-format
+msgid "Dominica"
+msgstr "โดเมน NIS"
-#: ../../services.pm:1
+#: lang.pm:217
#, c-format
-msgid "Start when requested"
+msgid "Dominican Republic"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: lang.pm:218
#, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-" %s\n"
-msgstr "Loopback file(s): %s\n"
+msgid "Algeria"
+msgstr "พอร์ตอนุกรม"
-#: ../../network/isdn.pm:1
+#: lang.pm:219
#, c-format
-msgid "I don't know"
-msgstr "ผมไม่ทราบ"
+msgid "Ecuador"
+msgstr ""
+
+#: lang.pm:220
+#, fuzzy, c-format
+msgid "Estonia"
+msgstr "Estonian"
-#: ../../printer/main.pm:1
+#: lang.pm:221
+#, fuzzy, c-format
+msgid "Egypt"
+msgstr "ว่าง"
+
+#: lang.pm:222
#, c-format
-msgid ", TCP/IP host \"%s\", port %s"
+msgid "Western Sahara"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: lang.pm:223
+#, fuzzy, c-format
+msgid "Eritrea"
+msgstr "ส่วนของผู้เชี่ยวชาญ"
+
+#: lang.pm:224 network/adsl_consts.pm:193 network/adsl_consts.pm:200
+#: network/adsl_consts.pm:209 network/adsl_consts.pm:220
+#, fuzzy, c-format
+msgid "Spain"
+msgstr "สเปน"
+
+#: lang.pm:225
+#, fuzzy, c-format
+msgid "Ethiopia"
+msgstr "Estonian"
+
+#: lang.pm:226 network/adsl_consts.pm:119
#, c-format
-msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
-"\n"
-"Do you want to continue?"
-msgstr ""
+msgid "Finland"
+msgstr "ฟินแลนด์"
-#: ../../keyboard.pm:1
+#: lang.pm:227
#, fuzzy, c-format
-msgid "Telugu"
-msgstr "เบลเยี่ยม"
+msgid "Fiji"
+msgstr "ฟินแลนด์"
-#: ../../harddrake/sound.pm:1
+#: lang.pm:228
#, c-format
-msgid ""
-"\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+msgid "Falkland Islands (Malvinas)"
msgstr ""
-#: ../../standalone/drakfont:1
+#: lang.pm:229
#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "ออกจากการติดตั้ง"
+msgid "Micronesia"
+msgstr "Macedonian"
-#: ../../standalone/net_monitor:1
+#: lang.pm:230
#, fuzzy, c-format
-msgid "Connecting to Internet "
-msgstr "ต่อเข้า Internet "
+msgid "Faroe Islands"
+msgstr "ไอซ์แลนด์"
-#: ../../standalone/scannerdrake:1
+#: lang.pm:232
#, c-format
-msgid " ("
+msgid "Gabon"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+#: lang.pm:233 network/adsl_consts.pm:237 network/adsl_consts.pm:244
+#: network/netconnect.pm:51
+#, c-format
+msgid "United Kingdom"
+msgstr "อังกฤษ"
+
+#: lang.pm:234
+#, c-format
+msgid "Grenada"
+msgstr ""
-#: ../../printer/main.pm:1
+#: lang.pm:235
#, fuzzy, c-format
-msgid "Novell server \"%s\", printer \"%s\""
-msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
+msgid "Georgia"
+msgstr "นอร์เวย์"
-#: ../../keyboard.pm:1
+#: lang.pm:236
#, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Azerbaidjani (cyrillic)"
+msgid "French Guiana"
+msgstr "ฝรั่งเศษ"
-#: ../../standalone/drakfloppy:1
+#: lang.pm:237
#, c-format
-msgid "Add a module"
-msgstr "เพิ่ม 1 module"
+msgid "Ghana"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: lang.pm:238
#, c-format
-msgid "Profile to delete:"
-msgstr "profile ที่ต้องการลบ:"
+msgid "Gibraltar"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: lang.pm:239
#, fuzzy, c-format
-msgid "Local measure"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Greenland"
+msgstr "ไอซ์แลนด์"
-#: ../../network/network.pm:1
+#: lang.pm:240
#, c-format
-msgid "Warning : IP address %s is usually reserved !"
+msgid "Gambia"
msgstr ""
-#: ../../mouse.pm:1
+#: lang.pm:241
+#, fuzzy, c-format
+msgid "Guinea"
+msgstr "ทั่วไป"
+
+#: lang.pm:242
#, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid "Guadeloupe"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: lang.pm:243
#, c-format
-msgid ""
-" - Create Etherboot Enabled Boot Images:\n"
-" \tTo boot a kernel via etherboot, a special kernel/initrd image must "
-"be created.\n"
-" \tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical \n"
-" \tinterface to help manage/customize these images. To create the "
-"file \n"
-" \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-" \tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel."
+msgid "Equatorial Guinea"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: lang.pm:245
#, c-format
-msgid "Account Login (user name)"
-msgstr "Account Login (user name)"
+msgid "South Georgia and the South Sandwich Islands"
+msgstr ""
+
+#: lang.pm:246
+#, fuzzy, c-format
+msgid "Guatemala"
+msgstr "เกตเวย์"
-#: ../../standalone/harddrake2:1
+#: lang.pm:247
#, c-format
-msgid "Fdiv bug"
+msgid "Guam"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: lang.pm:248
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+msgid "Guinea-Bissau"
msgstr ""
-#: ../../security/l10n.pm:1
+#: lang.pm:249
#, c-format
-msgid "Accept broadcasted icmp echo"
+msgid "Guyana"
msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:250
#, c-format
-msgid "Uruguay"
+msgid "China (Hong Kong)"
msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:251
+#, c-format
+msgid "Heard and McDonald Islands"
+msgstr ""
+
+#: lang.pm:252
+#, c-format
+msgid "Honduras"
+msgstr ""
+
+#: lang.pm:253
#, fuzzy, c-format
-msgid "Benin"
-msgstr "เบลเยี่ยม"
+msgid "Croatia"
+msgstr "Croatian"
-#: ../../printer/main.pm:1
+#: lang.pm:254
+#, c-format
+msgid "Haiti"
+msgstr ""
+
+#: lang.pm:255 network/adsl_consts.pm:144
#, fuzzy, c-format
-msgid "SMB/Windows server \"%s\", share \"%s\""
-msgstr "SMB/วินโดวส์ 95/98/NT"
+msgid "Hungary"
+msgstr "อังการี"
-#: ../../standalone/drakperm:1
+#: lang.pm:256
#, fuzzy, c-format
-msgid "Path selection"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+msgid "Indonesia"
+msgstr "ไม่มี"
+
+#: lang.pm:257 standalone/drakxtv:48
+#, fuzzy, c-format
+msgid "Ireland"
+msgstr "ไอซ์แลนด์"
+
+#: lang.pm:258
+#, fuzzy, c-format
+msgid "Israel"
+msgstr "อิสราเอล"
+
+#: lang.pm:259
+#, fuzzy, c-format
+msgid "India"
+msgstr "Iranian"
-#: ../../standalone/scannerdrake:1
+#: lang.pm:260
#, c-format
-msgid "Name/IP address of host:"
+msgid "British Indian Ocean Territory"
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: lang.pm:261
#, c-format
-msgid "Monitor: %s\n"
-msgstr "จอภาพ: %s\n"
+msgid "Iraq"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: lang.pm:262
#, fuzzy, c-format
-msgid "Custom & system settings"
-msgstr "กำลังพาร์ติชั่น Custom disk"
+msgid "Iran"
+msgstr "Iranian"
-#: ../../partition_table/raw.pm:1
+#: lang.pm:263
#, fuzzy, c-format
-msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+msgid "Iceland"
+msgstr "ไอซ์แลนด์"
+
+#: lang.pm:265
+#, c-format
+msgid "Jamaica"
msgstr ""
-"มีสิ่งไม่ดีเกิดขึ้นกับ disk ของคุณซึ่งเราไม่สามารถตรวจ\n"
-"สอบความถูกต้องของข้อมูลได้\n"
-"นั่นหมายความว่าการเขียนข้อมูลลงไปอาจกลายเป็นขยะ"
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:266
#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "ชื่อของเครื่องพิมพ์"
+msgid "Jordan"
+msgstr "Iranian"
-#: ../../standalone/drakbackup:1
+#: lang.pm:267
+#, c-format
+msgid "Japan"
+msgstr "ญี่ปุ่น"
+
+#: lang.pm:268
#, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "Kenya"
+msgstr "คีย์บอร์ด"
-#: ../../standalone/scannerdrake:1
+#: lang.pm:269
#, c-format
-msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+msgid "Kyrgyzstan"
msgstr ""
-#: ../../../move/move.pm:1
+#: lang.pm:270
#, c-format
-msgid "Key isn't writable"
+msgid "Cambodia"
msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:271
#, c-format
-msgid "Bangladesh"
+msgid "Kiribati"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: lang.pm:272
#, c-format
-msgid "Japan (cable)"
+msgid "Comoros"
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Initial tests"
-msgstr "ข้อความ init"
+#: lang.pm:273
+#, c-format
+msgid "Saint Kitts and Nevis"
+msgstr ""
-#: ../../network/isdn.pm:1
+#: lang.pm:274
#, c-format
-msgid "Continue"
-msgstr "ทำงานต่อหรือไม่?"
+msgid "Korea (North)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:275
#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "แบบปรับแก้ได้ (Customized) "
+msgid "Korea"
+msgstr "More"
+
+#: lang.pm:276
+#, fuzzy, c-format
+msgid "Kuwait"
+msgstr "ออก"
-#: ../../standalone/drakbackup:1
+#: lang.pm:277
#, c-format
-msgid "Saturday"
-msgstr "เสาร์"
+msgid "Cayman Islands"
+msgstr ""
-#: ../../help.pm:1
+#: lang.pm:278
#, c-format
-msgid ""
-"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
-"If you notice the sound card displayed is not the one that is actually\n"
-"present on your system, you can click on the button and choose another\n"
-"driver."
+msgid "Kazakhstan"
msgstr ""
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid "Set the root umask."
-msgstr "ไม่มีรหัสผ่าน"
+#: lang.pm:279
+#, c-format
+msgid "Laos"
+msgstr ""
-#: ../../install_any.pm:1 ../../partition_table.pm:1
+#: lang.pm:280
#, c-format
-msgid "Error reading file %s"
-msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
+msgid "Lebanon"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: lang.pm:281
#, c-format
-msgid "Script-based"
-msgstr "รูปแบบสคริปต์"
+msgid "Saint Lucia"
+msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "ฟอร์แมต"
+#: lang.pm:282
+#, c-format
+msgid "Liechtenstein"
+msgstr ""
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: lang.pm:283
+#, c-format
+msgid "Sri Lanka"
+msgstr ""
+
+#: lang.pm:284
#, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
+msgid "Liberia"
+msgstr "พอร์ตอนุกรม"
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:285
#, c-format
-msgid " on "
+msgid "Lesotho"
msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: lang.pm:286
#, c-format
-msgid "The URL must begin with http:// or https://"
+msgid "Lithuania"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:287
#, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "Luxembourg"
+msgstr ""
+
+#: lang.pm:288
+#, fuzzy, c-format
+msgid "Latvia"
+msgstr "ตำแหน่ง"
+
+#: lang.pm:289
+#, c-format
+msgid "Libya"
msgstr ""
-#: ../../any.pm:1
+#: lang.pm:290
#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "ระบบปฏิบัติการอื่นๆ (SunOS...)"
+msgid "Morocco"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: lang.pm:291
#, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "ติดตั้ง/อัพเกรด "
+msgid "Monaco"
+msgstr "จอภาพ"
-#: ../../install_steps_gtk.pm:1
+#: lang.pm:292
#, c-format
-msgid "%d packages"
-msgstr "แพ็คเก็จ %d ชุด"
+msgid "Moldova"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: lang.pm:293
#, c-format
-msgid "Costa Rica"
-msgstr "คอสตาริกา"
+msgid "Madagascar"
+msgstr ""
-#: ../../standalone.pm:1
+#: lang.pm:294
#, c-format
-msgid ""
-"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
-"Backup and Restore application\n"
-"\n"
-"--default : save default directories.\n"
-"--debug : show all debug messages.\n"
-"--show-conf : list of files or directories to backup.\n"
-"--config-info : explain configuration file options (for non-X "
-"users).\n"
-"--daemon : use daemon configuration. \n"
-"--help : show this message.\n"
-"--version : show version number.\n"
+msgid "Marshall Islands"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: lang.pm:295
#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+msgid "Macedonia"
+msgstr "Macedonian"
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "เลือกออปชั่นเพิ่มเติมสำหรับเซิร์ฟเวอร์"
+#: lang.pm:296
+#, c-format
+msgid "Mali"
+msgstr ""
-#: ../../keyboard.pm:1
+#: lang.pm:297
#, c-format
-msgid "Icelandic"
-msgstr "ไอซ์แลนด์"
+msgid "Myanmar"
+msgstr ""
-#: ../../standalone.pm:1
+#: lang.pm:298
#, c-format
-msgid ""
-"\n"
-"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Mongolia"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:299
#, c-format
-msgid ""
-"Maximum size\n"
-" allowed for Drakbackup (MB)"
+msgid "Northern Mariana Islands"
msgstr ""
-#: ../../loopback.pm:1
+#: lang.pm:300
#, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circular mounts %s\n"
+msgid "Martinique"
+msgstr ""
+
+#: lang.pm:301
+#, c-format
+msgid "Mauritania"
+msgstr ""
-#: ../../standalone/drakboot:1
+#: lang.pm:302
#, fuzzy, c-format
-msgid "Lilo/grub mode"
-msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"
+msgid "Montserrat"
+msgstr "พอร์ตของเม้าส์"
-#: ../../lang.pm:1
+#: lang.pm:303
#, c-format
-msgid "Martinique"
+msgid "Malta"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:304
#, c-format
-msgid "HardDrive / NFS"
+msgid "Mauritius"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:305
#, c-format
-msgid "Old user list:\n"
+msgid "Maldives"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:306
#, c-format
-msgid "Search Backups"
+msgid "Malawi"
msgstr ""
-#: ../../modules/parameters.pm:1
+#: lang.pm:307
#, fuzzy, c-format
-msgid "a number"
-msgstr "หมายเลขโทรศัพท์"
+msgid "Mexico"
+msgstr "Mouse"
-#: ../../keyboard.pm:1
+#: lang.pm:308
#, c-format
-msgid "Swedish"
-msgstr "สวีเดน"
+msgid "Malaysia"
+msgstr ""
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: lang.pm:309
#, c-format
-msgid "Which %s driver should I try?"
-msgstr "ต้องการให้โปรแกรมทดลองใช้ไดรเวอร์ %s ชนิดใด?"
+msgid "Mozambique"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: lang.pm:310
#, c-format
-msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+msgid "Namibia"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:311
#, fuzzy, c-format
-msgid "Weekday"
-msgstr "พุธ"
+msgid "New Caledonia"
+msgstr "Macedonian"
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Filesystem types:"
-msgstr "ประเภทของระบบไฟล์:"
+#: lang.pm:312
+#, fuzzy, c-format
+msgid "Niger"
+msgstr "สูง"
-#: ../../lang.pm:1
+#: lang.pm:313
#, c-format
-msgid "Northern Mariana Islands"
+msgid "Norfolk Island"
msgstr ""
-#: ../../printer/main.pm:1
+#: lang.pm:314
+#, fuzzy, c-format
+msgid "Nigeria"
+msgstr "พอร์ตอนุกรม"
+
+#: lang.pm:315
#, c-format
-msgid ", multi-function device on HP JetDirect"
+msgid "Nicaragua"
msgstr ""
-#: ../../mouse.pm:1
+#: lang.pm:318
#, c-format
-msgid "none"
-msgstr "ไม่มี"
+msgid "Nepal"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: lang.pm:319
#, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
+msgid "Nauru"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: lang.pm:320
#, fuzzy, c-format
-msgid "Floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
+msgid "Niue"
+msgstr "NoVideo"
-#: ../../standalone/drakfont:1
+#: lang.pm:321
#, c-format
-msgid "Ghostscript referencing"
+msgid "New Zealand"
msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: lang.pm:322
#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Bootloader ที่จะใช้"
+msgid "Oman"
+msgstr "โดเมน NIS"
-#: ../../security/l10n.pm:1
+#: lang.pm:323
#, c-format
-msgid "Authorize all services controlled by tcp_wrappers"
+msgid "Panama"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: lang.pm:324
#, c-format
-msgid "Move"
-msgstr "ย้าย"
+msgid "Peru"
+msgstr ""
-#: ../../any.pm:1 ../../help.pm:1
+#: lang.pm:325
#, c-format
-msgid "Bootloader to use"
-msgstr "Bootloader ที่จะใช้"
+msgid "French Polynesia"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:326
#, c-format
-msgid "SMB server host"
-msgstr "ชื่อโฮสต์ของ SMB server"
+msgid "Papua New Guinea"
+msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "เซิร์ฟเวอร์ NIS"
+#: lang.pm:327
+#, c-format
+msgid "Philippines"
+msgstr ""
+
+#: lang.pm:328
+#, c-format
+msgid "Pakistan"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:329 network/adsl_consts.pm:177
#, fuzzy, c-format
-msgid "Minute"
-msgstr "1 นาที"
+msgid "Poland"
+msgstr "ไอซ์แลนด์"
-#: ../../install_messages.pm:1
+#: lang.pm:330
#, c-format
-msgid ""
-"\n"
-"Warning\n"
-"\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
-"\n"
-"\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer, duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
-"\n"
-"\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
+msgid "Saint Pierre and Miquelon"
msgstr ""
-#: ../../standalone/printerdrake:1
+#: lang.pm:331
#, fuzzy, c-format
-msgid "/_Expert mode"
-msgstr "โหมดผู้เชี่ยวชาญ"
+msgid "Pitcairn"
+msgstr "เครื่องพิมพ์"
+
+#: lang.pm:332
+#, fuzzy, c-format
+msgid "Puerto Rico"
+msgstr "Protocol"
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:333
+#, fuzzy, c-format
+msgid "Palestine"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+
+#: lang.pm:334 network/adsl_consts.pm:187
+#, fuzzy, c-format
+msgid "Portugal"
+msgstr "Port"
+
+#: lang.pm:335
#, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgid "Paraguay"
msgstr ""
-#: ../../services.pm:1
+#: lang.pm:336
#, c-format
-msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+msgid "Palau"
msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:337
#, fuzzy, c-format
-msgid "Micronesia"
-msgstr "Macedonian"
+msgid "Qatar"
+msgstr "สถานะ:"
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "สี่พันล้านสี (32 บิต)"
+#: lang.pm:338
+#, fuzzy, c-format
+msgid "Reunion"
+msgstr "ขนาดจอภาพ"
-#: ../../steps.pm:1
-#, c-format
-msgid "License"
-msgstr ""
+#: lang.pm:339
+#, fuzzy, c-format
+msgid "Romania"
+msgstr "โดเมน NIS"
+
+#: lang.pm:340
+#, fuzzy, c-format
+msgid "Russia"
+msgstr "รัสเซีย"
-#: ../../standalone/drakbackup:1
+#: lang.pm:341
#, c-format
-msgid "This may take a moment to generate the keys."
+msgid "Rwanda"
msgstr ""
-#: ../../standalone/draksec:1
+#: lang.pm:342
#, c-format
-msgid ""
-"Here, you can setup the security level and administrator of your machine.\n"
-"\n"
-"\n"
-"The Security Administrator is the one who will receive security alerts if "
-"the\n"
-"'Security Alerts' option is set. It can be a username or an email.\n"
-"\n"
-"\n"
-"The Security Level menu allows you to select one of the six preconfigured "
-"security levels\n"
-"provided with msec. These levels range from poor security and ease of use, "
-"to\n"
-"paranoid config, suitable for very sensitive server applications:\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
-"very\n"
-"easy to use security level. It should only be used for machines not "
-"connected to\n"
-"any network and that are not accessible to everybody.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
-"security\n"
-"recommended for a computer that will be used to connect to the Internet as "
-"a\n"
-"client.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">High</span>: There are already some\n"
-"restrictions, and more automatic checks are run every night.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
-"enough\n"
-"to use the system as a server which can accept connections from many "
-"clients. If\n"
-"your machine is only a client on the Internet, you should choose a lower "
-"level.\n"
-"\n"
-"\n"
-"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
-"previous\n"
-"level, but the system is entirely closed and security features are at their\n"
-"maximum"
+msgid "Saudi Arabia"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:343
#, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Solomon Islands"
msgstr ""
-#: ../../network/adsl.pm:1
+#: lang.pm:344
+#, fuzzy, c-format
+msgid "Seychelles"
+msgstr "เชลล์ที่ใช้"
+
+#: lang.pm:345
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
+
+#: lang.pm:347
#, c-format
-msgid "Sagem (using pppoa) usb"
+msgid "Singapore"
msgstr ""
-#: ../../install_any.pm:1
+#: lang.pm:348
#, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Saint Helena"
msgstr ""
-"เกิดข้อผิดพลาดขึ้น - ไม่พบอุปกรณ์ที่ถูกต้องเพื่อจะสร้างระบบไฟล์ใหม่ "
-"โปรดตรวจสอบฮาร์ดแวร์ของท่านเพื่อแก้ไขปัญหานี้"
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:349
#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
+msgid "Slovenia"
+msgstr "สโลวาเนีย"
-#: ../../network/netconnect.pm:1
+#: lang.pm:350
#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "คุณต้องการต่อตอน boot หรือไม่"
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
+
+#: lang.pm:351
+#, fuzzy, c-format
+msgid "Slovakia"
+msgstr "สโลวาเนีย"
-#: ../../standalone/harddrake2:1
+#: lang.pm:352
#, c-format
-msgid "Processor ID"
+msgid "Sierra Leone"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: lang.pm:353
#, c-format
-msgid "Sound trouble shooting"
+msgid "San Marino"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polish (qwerty layout)"
+#: lang.pm:354
+#, fuzzy, c-format
+msgid "Senegal"
+msgstr "enable"
-#: ../../standalone/printerdrake:1
+#: lang.pm:355
#, fuzzy, c-format
-msgid "/_Add Printer"
-msgstr "เครื่องพิมพ์"
+msgid "Somalia"
+msgstr "โดเมน NIS"
+
+#: lang.pm:356
+#, fuzzy, c-format
+msgid "Suriname"
+msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
-#: ../../standalone/drakbackup:1
+#: lang.pm:357
#, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
+msgid "Sao Tome and Principe"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:358
#, c-format
-msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
-"\n"
-"Do you really want to configure printing on this machine?"
+msgid "El Salvador"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:359
#, c-format
-msgid "Host \"%s\", port %s"
+msgid "Syria"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: lang.pm:360
#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "พาร์ติชั่นนี้ไม่สามารถใช้กับ loopback"
+msgid "Swaziland"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: lang.pm:361
#, c-format
-msgid "File already exists. Use it?"
-msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"
+msgid "Turks and Caicos Islands"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: lang.pm:362
#, c-format
-msgid "received: "
+msgid "Chad"
msgstr ""
-#: ../../keyboard.pm:1
+#: lang.pm:363
#, c-format
-msgid "Right Alt key"
+msgid "French Southern Territories"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: lang.pm:364
#, c-format
-msgid "the list of alternative drivers for this sound card"
+msgid "Togo"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: lang.pm:365
#, c-format
-msgid "Gateway"
-msgstr "เกตเวย์"
+msgid "Thailand"
+msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:366
#, c-format
-msgid "Tonga"
+msgid "Tajikistan"
msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:367
#, c-format
-msgid "Tunisia"
+msgid "Tokelau"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "เครื่องพิมพ์"
-
-#: ../../standalone/drakconnect:1
+#: lang.pm:368
#, c-format
-msgid "Profile: "
-msgstr "Profile: "
+msgid "East Timor"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: lang.pm:369
#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "Turkmenistan"
msgstr ""
-#: ../../security/help.pm:1
+#: lang.pm:370
#, c-format
-msgid "Allow/Forbid autologin."
+msgid "Tunisia"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: lang.pm:371
#, c-format
-msgid "XawTV isn't installed!"
+msgid "Tonga"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:372
#, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
+msgid "Turkey"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: lang.pm:373
#, c-format
-msgid "old static device name used in dev package"
+msgid "Trinidad and Tobago"
msgstr ""
-#: ../../security/l10n.pm:1
+#: lang.pm:374
#, c-format
-msgid "Enable the logging of IPv4 strange packets"
+msgid "Tuvalu"
msgstr ""
-#: ../../any.pm:1
+#: lang.pm:375
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "ตำแหน่ง"
+
+#: lang.pm:376
#, c-format
-msgid "This label is already used"
-msgstr "หัวข้อนี้ถูกใช้ไปเรียบร้อยแล้ว"
+msgid "Tanzania"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: lang.pm:377
+#, fuzzy, c-format
+msgid "Ukraine"
+msgstr "ยูเครน"
+
+#: lang.pm:378
+#, fuzzy, c-format
+msgid "Uganda"
+msgstr "Update"
+
+#: lang.pm:379
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "United States Minor Outlying Islands"
msgstr ""
-#: ../../keyboard.pm:1
+#: lang.pm:381
#, c-format
-msgid "Greek (polytonic)"
+msgid "Uruguay"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: lang.pm:382
#, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "หลังจาก format พาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
+msgid "Uzbekistan"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: lang.pm:383
#, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "ชนิดการเชื่อมต่อ"
+msgid "Vatican"
+msgstr "ตำแหน่ง"
-#: ../../standalone/livedrake:1
+#: lang.pm:384
#, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
+msgid "Saint Vincent and the Grenadines"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "ใช้ auto detection"
-
-#: ../../any.pm:1
+#: lang.pm:385
#, c-format
-msgid "Choose the default user:"
-msgstr "เลือกผู้ใช้ default"
+msgid "Venezuela"
+msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:386
#, c-format
-msgid "Gabon"
+msgid "Virgin Islands (British)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+#: lang.pm:387
+#, c-format
+msgid "Virgin Islands (U.S.)"
msgstr ""
-"เวลาใช้ CUPS SERVER คุณไม่จำเป็นต้องปรับแต่งเครื่องพิมพ์\n"
-"ในตอนนี้ เครื่องพิมพ์จะถูกค้นหาเอง\n"
-"กรณีมีข้อสงสัย กรุณาเลือก \"Remote CUPS server\""
-#: ../../any.pm:1
+#: lang.pm:388
#, c-format
-msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
+msgid "Vietnam"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: lang.pm:389
#, c-format
-msgid "Directory (or module) to put the backup on this host."
+msgid "Vanuatu"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain"
-msgstr "โดเมน NIS"
+#: lang.pm:390
+#, c-format
+msgid "Wallis and Futuna"
+msgstr ""
-#: ../../any.pm:1
+#: lang.pm:391
#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "กำหนดค่าหน่วยความจำ (RAM) ให้ถูกต้องถ้าต้องการ (ระบบพบ %d MB)"
+msgid "Samoa"
+msgstr ""
-#: ../../help.pm:1
+#: lang.pm:392
#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader."
+msgid "Yemen"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: lang.pm:393
#, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "ผู้ให้บริการ dns 2 (optional)"
+msgid "Mayotte"
+msgstr ""
-#: ../../any.pm:1 ../../help.pm:1
+#: lang.pm:394
#, c-format
-msgid "Boot device"
-msgstr "อุปกรณ์บูต"
+msgid "Serbia & Montenegro"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: lang.pm:395 standalone/drakxtv:50
#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "พาร์ติชั่นไหนที่คุณต้องการเปลี่ยนขนาด"
+msgid "South Africa"
+msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:396
#, c-format
-msgid "United States Minor Outlying Islands"
+msgid "Zambia"
msgstr ""
-#: ../../lang.pm:1
+#: lang.pm:397
#, fuzzy, c-format
-msgid "Djibouti"
-msgstr "เลิก"
+msgid "Zimbabwe"
+msgstr "อาจจะ"
-#: ../../standalone/logdrake:1
+#: lang.pm:966
#, c-format
-msgid "A tool to monitor your logs"
-msgstr "อุปกรณ์ตรวจสอบ logs"
+msgid "Welcome to %s"
+msgstr "ยินดีต้อนรับสู่ %s"
-#: ../../network/netconnect.pm:1
+#: loopback.pm:32
#, c-format
-msgid "detected on port %s"
-msgstr "ค้นหาเจอบน port %s"
+msgid "Circular mounts %s\n"
+msgstr "Circular mounts %s\n"
-#: ../../printer/data.pm:1
+#: lvm.pm:115
#, c-format
-msgid "LPD"
-msgstr ""
+msgid "Remove the logical volumes first\n"
+msgstr "ลบ logical volume ก่อน\n"
-#: ../../Xconfig/various.pm:1
+#: modules/interactive.pm:21 standalone/drakconnect:962
#, c-format
-msgid "Graphics card: %s\n"
-msgstr "กราฟฟิคการ์ด: %s\n"
+msgid "Parameters"
+msgstr "Parameters"
+
+#: modules/interactive.pm:21 standalone/draksec:44
+#, c-format
+msgid "NONE"
+msgstr ""
-#: ../../standalone/printerdrake:1
+#: modules/interactive.pm:22
#, fuzzy, c-format
-msgid "/Set as _Default"
-msgstr " (Default)"
+msgid "Module configuration"
+msgstr "การคอนฟิก"
-#: ../../security/l10n.pm:1
+#: modules/interactive.pm:22
#, c-format
-msgid "Accept icmp echo"
+msgid "You can configure each parameter of the module here."
msgstr ""
-#: ../../bootloader.pm:1
+#: modules/interactive.pm:63
#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../mouse.pm:1
-#, fuzzy, c-format
-msgid "Logitech CC Series with Wheel emulation"
-msgstr "Logitech CC Series"
+msgid "Found %s %s interfaces"
+msgstr "ตรวจพบ %s อินเทอร์เฟส %s"
-#: ../../partition_table.pm:1
+#: modules/interactive.pm:64
#, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Extended partition not supported on this platform"
-
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+msgid "Do you have another one?"
+msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
-#: ../../network/isdn.pm:1
+#: modules/interactive.pm:65
#, c-format
-msgid "ISDN Configuration"
-msgstr "การคอนฟิก ISDN"
+msgid "Do you have any %s interfaces?"
+msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "high"
-msgstr "สูง"
+#: modules/interactive.pm:71
+#, c-format
+msgid "See hardware info"
+msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"
-#: ../../standalone/drakgw:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: modules/interactive.pm:87
#, c-format
-msgid "Internet Connection Sharing"
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+msgid "Installing driver for %s card %s"
+msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"
-#: ../../standalone/logdrake:1
+#: modules/interactive.pm:87
#, c-format
-msgid "Choose file"
-msgstr "เลือก file"
+msgid "(module %s)"
+msgstr "(โมดูล %s)"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Summary: "
-msgstr "รวมความ"
+#: modules/interactive.pm:98
+#, c-format
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
+msgstr ""
-#: ../../network/shorewall.pm:1
+#: modules/interactive.pm:104
#, c-format
msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
msgstr ""
+"คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว\n"
+"อ๊อปชั่นจะอยู่ในรูปแบบ ``name=value name2=value2 ...''\n"
+"ตัวอย่างเช่น, ``io=0x300 irq=7''"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+#: modules/interactive.pm:106
+#, c-format
+msgid "Module options:"
+msgstr "อ๊อปชั่นของโมดูล:"
-#: ../../security/l10n.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: modules/interactive.pm:118
#, c-format
-msgid "Daily security check"
-msgstr ""
+msgid "Which %s driver should I try?"
+msgstr "ต้องการให้โปรแกรมทดลองใช้ไดรเวอร์ %s ชนิดใด?"
-#: ../../printer/printerdrake.pm:1
+#: modules/interactive.pm:127
#, c-format
msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
msgstr ""
+"ในบางกรณี สำหรับไดรเวอร์ %s จะจำเป็นต้องใช้ข้อมูลเพิ่มเติมเพื่อ\n"
+"ให้สามารถทำงานได้ถูกต้อง แม้ว่าไดรเวอร์อาจทำงานได้โดยปกติ โดยปราศจาก\n"
+"ข้อมูลดังกล่าว คุณต้องการจะระบุอ๊อปชั่นเพิ่มเติมพิเศษหรือให้โปรแกรมทำการ\n"
+"ตรวจหาข้อมูลที่จำเป็นต้องใช้? ในบางกรณีการตรวจหาอาจทำให้คอมพิวเตอร์แฮงค์\n"
+"แต่จะไม่เป็นอันตรายกับคอมพิวเตอร์"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+#: modules/interactive.pm:131
+#, c-format
+msgid "Autoprobe"
+msgstr "ตรวจหาอัตโนมัติ"
-#: ../../mouse.pm:1
+#: modules/interactive.pm:131
#, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
+msgid "Specify options"
+msgstr "ระบุอ๊อปชั่น"
-#: ../../standalone/harddrake2:1
+#: modules/interactive.pm:143
#, c-format
msgid ""
-"the WP flag in the CR0 register of the cpu enforce write proctection at the "
-"memory page level, thus enabling the processor to prevent unchecked kernel "
-"accesses to user memory (aka this is a bug guard)"
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
msgstr ""
+"การโหลดโมดูล %s ล้มเหลว\n"
+"คุณต้องการให้ทดลองอีกครั้งด้วยพารามิเตอร์อื่นๆอีกหรือไม่?"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "อ่าน CUPS drivers database..."
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "เลือกกราฟฟิคการ์ด"
-
-#: ../../printer/printerdrake.pm:1
+#: modules/parameters.pm:49
#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "ลบคิว"
+msgid "a number"
+msgstr "หมายเลขโทรศัพท์"
-#: ../../network/adsl.pm:1
+#: modules/parameters.pm:51
#, c-format
-msgid "Sagem (using dhcp) usb"
+msgid "%d comma separated numbers"
msgstr ""
-#: ../../lang.pm:1
+#: modules/parameters.pm:51
#, c-format
-msgid "French Southern Territories"
+msgid "%d comma separated strings"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: modules/parameters.pm:53
#, c-format
-msgid "the vendor name of the processor"
+msgid "comma separated numbers"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Maintain %s:\n"
-" \tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-" \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
-" \thelps in this respect by adding or removing system users from this "
-"file."
-msgstr ""
+#: modules/parameters.pm:53
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "ฟอร์แมตพาร์ติชั่น"
-#: ../../diskdrake/interactive.pm:1
+#: mouse.pm:25
#, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นนี้ควรจะทำการสำรองไว้"
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
-#: ../../install_steps_gtk.pm:1
+#: mouse.pm:31 security/level.pm:12
#, c-format
-msgid "Installing package %s"
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+msgid "Standard"
+msgstr "Standard"
-#: ../../printer/printerdrake.pm:1
+#: mouse.pm:32
#, c-format
-msgid "Checking device and configuring HPOJ..."
-msgstr ""
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
-#: ../../diskdrake/interactive.pm:1
+#: mouse.pm:33
#, c-format
-msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
-msgstr ""
-"หากต้องการเพิ่มพาร์ติชั่น โปรดลบพาร์ติชั่นทิ้งหนึ่งพาร์ติชั่นเพื่อสร้าง\n"
-"พาร์ติชั่นแบบ extended ได้"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generic PS2 Wheel Mouse"
-#: ../../printer/printerdrake.pm:1
+#: mouse.pm:34
#, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
-msgstr ""
+msgid "GlidePoint"
+msgstr "GlidePoint"
-#: ../../steps.pm:1
-#, c-format
-msgid "Choose packages to install"
-msgstr "เลือกแพ็คเก็จ"
+#: mouse.pm:36 network/modem.pm:23 network/modem.pm:37 network/modem.pm:42
+#: network/modem.pm:73 network/netconnect.pm:481 network/netconnect.pm:482
+#: network/netconnect.pm:483 network/netconnect.pm:503
+#: network/netconnect.pm:508 network/netconnect.pm:520
+#: network/netconnect.pm:525 network/netconnect.pm:541
+#: network/netconnect.pm:543
+#, fuzzy, c-format
+msgid "Automatic"
+msgstr "กำหนดค่า IP แบบอัตโนมัติ"
-#: ../../install_interactive.pm:1
+#: mouse.pm:39 mouse.pm:73
#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นทั้งหมดจะสูญหายไป %s"
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
-#: ../../install_steps_interactive.pm:1
+#: mouse.pm:40 mouse.pm:68
#, c-format
-msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "เครื่องของคุณไม่มีเนื้อที่เพียงพอในการติดตั้งหรือ upgrade (%d > %d)"
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
-#: ../../printer/printerdrake.pm:1
+#: mouse.pm:41
#, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
-msgstr ""
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
-"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
-"information on how to setup a new printer. The interface presented there is\n"
-"similar to the one used during installation."
-msgstr ""
+#: mouse.pm:42 mouse.pm:52
+#, fuzzy, c-format
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
-#: ../../lang.pm:1
+#: mouse.pm:47 mouse.pm:79
#, c-format
-msgid "Bhutan"
-msgstr ""
+msgid "1 button"
+msgstr "1 ปุ่ม"
-#: ../../standalone/drakgw:1
+#: mouse.pm:48 mouse.pm:57
#, c-format
-msgid "Network interface"
-msgstr "Network interface"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnection from Internet failed."
-msgstr "ต่อเข้า Internet "
+msgid "Generic 2 Button Mouse"
+msgstr "Generic 2 Button Mouse"
-#: ../../printer/printerdrake.pm:1
+#: mouse.pm:50 mouse.pm:59
#, fuzzy, c-format
-msgid "Reading printer data..."
-msgstr "อ่าน CUPS drivers database..."
+msgid "Generic 3 Button Mouse with Wheel emulation"
+msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"
-#: ../../keyboard.pm:1
+#: mouse.pm:51
#, c-format
-msgid "Korean keyboard"
-msgstr "Korean keyboard"
+msgid "Wheel"
+msgstr "Wheel"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: mouse.pm:55
#, c-format
-msgid "Not connected"
-msgstr "ไม่เชื่อมต่อ"
+msgid "serial"
+msgstr "พอร์ตอนุกรม"
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "No internet connection configured"
-msgstr "การปรับแต่งการติดต่อเข้า internet"
+#: mouse.pm:58
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"
-#: ../../keyboard.pm:1
+#: mouse.pm:60
#, c-format
-msgid "Greek"
-msgstr "กรีก"
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
-#: ../../lang.pm:1
+#: mouse.pm:61
#, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
-#: ../../mouse.pm:1
+#: mouse.pm:62
#, fuzzy, c-format
-msgid "Generic 3 Button Mouse with Wheel emulation"
-msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"
+msgid "Logitech MouseMan with Wheel emulation"
+msgstr "Logitech MouseMan"
-#: ../../any.pm:1
+#: mouse.pm:63
#, c-format
-msgid "Enable OF Boot?"
-msgstr "Enable OF Boot?"
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
-#: ../../fsedit.pm:1
+#: mouse.pm:65
#, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "คุณไม่สามารถใช้ JFS สำหรับพาร์ติชั่นที่น้อยกว่า 16MB ได้"
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
-#: ../../standalone/drakbackup:1
+#: mouse.pm:66
#, fuzzy, c-format
-msgid "Erase your RW media (1st Session)"
-msgstr "โปรดเลือกพาร์ติชั่น"
+msgid "Logitech CC Series with Wheel emulation"
+msgstr "Logitech CC Series"
-#: ../../Xconfig/various.pm:1
+#: mouse.pm:67
#, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "อัตราความถี่กวาดตามแนวตั้ง: %s\n"
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: mouse.pm:69
#, c-format
-msgid "Mount point"
-msgstr "กำหนดจุดเม้าท์"
+msgid "MM Series"
+msgstr "MM Series"
-#: ../../Xconfig/test.pm:1
+#: mouse.pm:70
#, c-format
-msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
-msgstr ""
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
-#: ../../printer/main.pm:1
+#: mouse.pm:71
#, c-format
-msgid "TCP/IP host \"%s\", port %s"
-msgstr ""
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"
-#: ../../standalone/drakperm:1
+#: mouse.pm:72
#, fuzzy, c-format
-msgid "User :"
-msgstr "ชื่อผู้ใช้"
+msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation"
+msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"
-#: ../../standalone/drakbackup:1
+#: mouse.pm:74
#, fuzzy, c-format
-msgid "Restore system"
-msgstr "ติดตั้งระบบ"
+msgid "Kensington Thinking Mouse with Wheel emulation"
+msgstr "Kensington Thinking Mouse"
-#: ../../standalone/scannerdrake:1
+#: mouse.pm:77
#, c-format
-msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
-msgstr ""
+msgid "busmouse"
+msgstr "busmouse"
-#: ../../standalone/drakpxe:1
+#: mouse.pm:80
#, c-format
-msgid "The DHCP end ip"
+msgid "2 buttons"
+msgstr "2 buttons"
+
+#: mouse.pm:81
+#, c-format
+msgid "3 buttons"
+msgstr "3 buttons"
+
+#: mouse.pm:82
+#, c-format
+msgid "3 buttons with Wheel emulation"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: mouse.pm:86
#, fuzzy, c-format
-msgid "Another one"
-msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
+msgid "Universal"
+msgstr "ออกจากการติดตั้ง"
-#: ../../standalone/drakbackup:1
+#: mouse.pm:88
#, c-format
-msgid "Drakbackup"
+msgid "Any PS/2 & USB mice"
msgstr ""
-#: ../../lang.pm:1
+#: mouse.pm:92
#, c-format
-msgid "Colombia"
-msgstr ""
+msgid "none"
+msgstr "ไม่มี"
-#: ../../standalone/drakgw:1
+#: mouse.pm:94
#, c-format
-msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
-msgstr ""
+msgid "No mouse"
+msgstr "ไม่มีเม้าส์"
-#: ../../Xconfig/monitor.pm:1
+#: mouse.pm:515
#, c-format
-msgid "Plug'n Play"
-msgstr ""
+msgid "Please test the mouse"
+msgstr "กรุณาทดสอบเม้าส์"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Reunion"
-msgstr "ขนาดจอภาพ"
+#: mouse.pm:517
+#, c-format
+msgid "To activate the mouse,"
+msgstr "เพื่อให้เม้าส์ทำงาน"
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: mouse.pm:518
#, c-format
-msgid "Details"
-msgstr "รายละเอียด"
+msgid "MOVE YOUR WHEEL!"
+msgstr "เลื่อนล้อของคุณ"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "เพื่อความปลอดภัย มันจะหยุดการติดต่อเดี๋ยวนี้"
+#: network/adsl.pm:19
+#, c-format
+msgid "use pppoe"
+msgstr "ใช้ pppoe"
-#: ../../standalone/drakbug:1
+#: network/adsl.pm:20
#, c-format
-msgid "Synchronization tool"
-msgstr ""
+msgid "use pptp"
+msgstr "ใช้ pptp"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
+#: network/adsl.pm:21
+#, c-format
+msgid "use dhcp"
+msgstr "ใช้ dhcp"
+
+#: network/adsl.pm:22
+#, c-format
+msgid "Alcatel speedtouch usb"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/adsl.pm:22 network/adsl.pm:23 network/adsl.pm:24
#, fuzzy, c-format
-msgid "Print"
-msgstr "เครื่องพิมพ์"
+msgid " - detected"
+msgstr "ค้นพบ %s"
-#: ../../standalone/drakbackup:1
+#: network/adsl.pm:23
#, c-format
-msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+msgid "Sagem (using pppoa) usb"
msgstr ""
-#: ../../lang.pm:1
+#: network/adsl.pm:24
#, c-format
-msgid "Mongolia"
+msgid "Sagem (using dhcp) usb"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: network/adsl.pm:35 network/netconnect.pm:679
#, c-format
-msgid "Mounted\n"
-msgstr "เม้าท์\n"
+msgid "Connect to the Internet"
+msgstr "ต่อเข้า Internet "
+
+#: network/adsl.pm:36 network/netconnect.pm:680
+#, c-format
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"การติดต่อโดยทั่วไปของ adsl คือ pppoe.\n"
+"บางครั้งอาจใช้ pptp มีน้อยคนที่ใช้ dhcp.\n"
+"ถ้าคุณไม่ทราบ เลือก 'use pppoe'"
-#: ../../standalone/printerdrake:1
+#: network/adsl.pm:41 network/netconnect.pm:684
#, fuzzy, c-format
-msgid "Configure CUPS"
-msgstr "คอนฟิกระบบ X"
+msgid "ADSL connection type :"
+msgstr "LAN connection"
-#: ../../help.pm:1
+#: network/drakfirewall.pm:12
#, fuzzy, c-format
-msgid "Graphical Interface"
-msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
+msgid "Web Server"
+msgstr "เซิร์ฟเวอร์"
-#: ../../standalone/drakbackup:1
+#: network/drakfirewall.pm:17
#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "เรียกคืนจากไฟล์"
+msgid "Domain Name Server"
+msgstr "ชื่อโดเมน"
-#: ../../install_steps_interactive.pm:1
+#: network/drakfirewall.pm:22
#, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "รหัสผ่านไม่เหมือนกัน"
+msgid "SSH server"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../install_steps_interactive.pm:1
+#: network/drakfirewall.pm:27
#, fuzzy, c-format
-msgid "Do you want to recover your system?"
-msgstr "คุณต้องการใช้ aboot หรือไม่"
+msgid "FTP server"
+msgstr "เซิร์ฟเวอร์ NIS"
+
+#: network/drakfirewall.pm:32
+#, fuzzy, c-format
+msgid "Mail Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+
+#: network/drakfirewall.pm:37
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../services.pm:1
+#: network/drakfirewall.pm:42
+#, fuzzy, c-format
+msgid "Telnet server"
+msgstr "X เซิร์ฟเวอร์"
+
+#: network/drakfirewall.pm:48
+#, fuzzy, c-format
+msgid "Samba server"
+msgstr "เซิร์ฟเวอร์ NIS"
+
+#: network/drakfirewall.pm:54
+#, fuzzy, c-format
+msgid "CUPS server"
+msgstr "เซิร์ฟเวอร์ DNS"
+
+#: network/drakfirewall.pm:60
#, c-format
-msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+msgid "Echo request (ping)"
msgstr ""
-"Portmapper บริหารการติดต่อของ RPC ซึ่งใช้กับ\n"
-"protocols เช่น NFS และ NIS Portmap server ต้องทำงานบนเครื่อง\n"
-"ที่ทำหน้าที่เป็น server ของ protocal ซึ่งเรียกใช้การทำงานแบบ RPC"
-#: ../../standalone/harddrake2:1
+#: network/drakfirewall.pm:125
#, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"
+msgid "No network card"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
-#: ../../lang.pm:1
+#: network/drakfirewall.pm:146
#, c-format
-msgid "Mauritius"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
msgstr ""
-#: ../../keyboard.pm:1
+#: network/drakfirewall.pm:152
#, c-format
-msgid "Myanmar (Burmese)"
+msgid ""
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
msgstr ""
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "ฟอร์แมตพาร์ติชั่น %s"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
-
-#: ../../keyboard.pm:1
+#: network/drakfirewall.pm:169
#, c-format
-msgid "Armenian (old)"
-msgstr "อาร์เมเนียน (เก่า)"
+msgid "Which services would you like to allow the Internet to connect to?"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/drakfirewall.pm:170
#, c-format
msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
msgstr ""
-#: ../advertising/12-mdkexpert.pl:1
+#: network/drakfirewall.pm:176
#, c-format
msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535.\n"
+"\n"
+"You can also give a range of ports (eg: 24300:24350/udp)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/drakfirewall.pm:186
#, c-format
-msgid ", host \"%s\", port %s"
+msgid "Everything (no firewall)"
msgstr ""
-#: ../../lang.pm:1
+#: network/drakfirewall.pm:188
#, fuzzy, c-format
-msgid "Monaco"
-msgstr "จอภาพ"
+msgid "Other ports"
+msgstr "กำลังตรวจสอบพอร์ต"
-#: ../../install_interactive.pm:1
+#: network/isdn.pm:127 network/isdn.pm:145 network/isdn.pm:157
+#: network/isdn.pm:163 network/isdn.pm:173 network/isdn.pm:183
+#: network/netconnect.pm:332
#, c-format
-msgid "Partitioning failed: %s"
-msgstr "การทำพาร์ติชั่นล้มเหลว: %s"
+msgid "ISDN Configuration"
+msgstr "การคอนฟิก ISDN"
-#: ../../fs.pm:1 ../../swap.pm:1
+#: network/isdn.pm:127
#, c-format
-msgid "%s formatting of %s failed"
-msgstr "กำลังฟอร์แมต %s ของ %s ที่มีปัญหา"
+msgid ""
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
+msgstr ""
+"เลือกผู้ให้บริการ\n"
+"ถ้าไม่มีเลือก ไม่มี (unlisted)"
-#: ../../standalone/drakxtv:1
+#: network/isdn.pm:140 standalone/drakconnect:503
#, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "คานาดา (ควิเบค)"
+msgid "European protocol (EDSS1)"
+msgstr "ยุโรป (EDS11)"
-#: ../../standalone/drakfloppy:1
+#: network/isdn.pm:140
#, fuzzy, c-format
-msgid "Floppy creation completed"
-msgstr "ชนิดการเชื่อมต่อ"
+msgid "European protocol"
+msgstr "Boot Protocol"
-#: ../../help.pm:1
+#: network/isdn.pm:142 standalone/drakconnect:504
#, fuzzy, c-format
-msgid "Upgrade"
-msgstr "Update"
+msgid ""
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Rest of the world \n"
+"No D-Channel (leased lines)"
-#: ../../help.pm:1
+#: network/isdn.pm:142
#, fuzzy, c-format
-msgid "Workstation"
-msgstr "Workstation ที่ทำงาน"
+msgid "Protocol for the rest of the world"
+msgstr "Rest of the world"
-#: ../../install_steps_interactive.pm:1
+#: network/isdn.pm:146
#, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"กำลังติดตั้งแพ็คเก็จ %s\n"
-"%d%%"
+msgid "Which protocol do you want to use?"
+msgstr "Protocol ไหนที่คุณต้องการ"
-#: ../../lang.pm:1
+#: network/isdn.pm:157
#, c-format
-msgid "Kyrgyzstan"
+msgid "Found \"%s\" interface do you want to use it ?"
msgstr ""
-#: ../../printer/main.pm:1
+#: network/isdn.pm:164
#, c-format
-msgid "Multi-function device on USB"
-msgstr ""
+msgid "What kind of card do you have?"
+msgstr "คุณมีการ์ดชนิดใด?"
-#: ../../../move/move.pm:1
+#: network/isdn.pm:165
#, c-format
-msgid ""
-"We didn't detect any USB key on your system. If you\n"
-"plug in an USB key now, Mandrake Move will have the ability\n"
-"to transparently save the data in your home directory and\n"
-"system wide configuration, for next boot on this computer\n"
-"or another one. Note: if you plug in a key now, wait several\n"
-"seconds before detecting again.\n"
-"\n"
-"\n"
-"You may also proceed without an USB key - you'll still be\n"
-"able to use Mandrake Move as a normal live Mandrake\n"
-"Operating System."
-msgstr ""
-
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid "With basic documentation"
-msgstr "ตำแหน่ง"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
-#: ../../services.pm:1
+#: network/isdn.pm:165
#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron คือโปรแกรมสำหรับตั้งเวลาทำงาน"
+msgid "PCI"
+msgstr "PCI"
-#: ../../install_interactive.pm:1
+#: network/isdn.pm:165
#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
+msgid "USB"
msgstr ""
-"คุณต้องมี root พาร์ติชั่น\n"
-"เพราะฉนั้นคุณต้องสร้าง พาร์ติชั่น (หรือกดเลือกอันที่มีอยู่)\n"
-"หลังจากนั้นเลือก ``Mount Point'' และจัดให้มันเป็น `/'"
-#: ../../lang.pm:1
+#: network/isdn.pm:165
#, c-format
-msgid "Western Sahara"
+msgid "I don't know"
+msgstr "ผมไม่ทราบ"
+
+#: network/isdn.pm:174
+#, c-format
+msgid ""
+"\n"
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
msgstr ""
+"\n"
+"ถ้าคุณมี การ์ด ISA ตัวเลขในหน้าต่อไปควรจะถูกต้องอยู่แล้ว\n"
+"\n"
+"ถ้าคุณมีการ์ด PCMCIA คุณต้องรู้ irq และ io ของการ์ดของคุณ\n"
-#: ../../network/network.pm:1
+#: network/isdn.pm:178
#, c-format
-msgid "Proxy should be http://..."
-msgstr "ค่าของ Proxy ควรจะเป็น http://..."
+msgid "Continue"
+msgstr "ทำงานต่อหรือไม่?"
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: network/isdn.pm:178
#, c-format
-msgid "South Africa"
-msgstr ""
+msgid "Abort"
+msgstr "เลิก"
-#: ../../standalone/drakbackup:1
+#: network/isdn.pm:184
#, fuzzy, c-format
-msgid "Eject tape after the backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Which of the following is your ISDN card?"
+msgstr "คุณใช้การ์ด ISDN ใด?"
-#: ../../standalone/drakTermServ:1
+#: network/netconnect.pm:95
#, c-format
-msgid "Etherboot Floppy/ISO"
+msgid "Ad-hoc"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:96
#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "การคอนฟิก Internet"
+msgid "Managed"
+msgstr "เลือกภาษาที่คุณใช้"
-#: ../../diskdrake/interactive.pm:1
+#: network/netconnect.pm:97
#, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "เลือกกิจกรรม"
+msgid "Master"
+msgstr "Mouse"
-#: ../../standalone/drakperm:1
-#, c-format
-msgid "Edit current rule"
-msgstr ""
+#: network/netconnect.pm:98
+#, fuzzy, c-format
+msgid "Repeater"
+msgstr "เรียกคืนจากไฟล์"
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:99
+#, fuzzy, c-format
+msgid "Secondary"
+msgstr "%d วินาที"
+
+#: network/netconnect.pm:100
+#, fuzzy, c-format
+msgid "Auto"
+msgstr "เลิก"
+
+#: network/netconnect.pm:103 printer/printerdrake.pm:1118
+#, fuzzy, c-format
+msgid "Manual configuration"
+msgstr "การคอนฟิก"
+
+#: network/netconnect.pm:104
+#, fuzzy, c-format
+msgid "Automatic IP (BOOTP/DHCP)"
+msgstr "กำหนดค่า IP แบบอัตโนมัติ"
+
+#: network/netconnect.pm:106
#, c-format
-msgid "%s"
+msgid "Automatic IP (BOOTP/DHCP/Zeroconf)"
msgstr ""
-#: ../../mouse.pm:1
-#, c-format
-msgid "Please test the mouse"
+#: network/netconnect.pm:156
+#, fuzzy, c-format
+msgid "Alcatel speedtouch USB modem"
msgstr "กรุณาทดสอบเม้าส์"
-#: ../../fs.pm:1
+#: network/netconnect.pm:157
+#, fuzzy, c-format
+msgid "Sagem USB modem"
+msgstr "System mode"
+
+#: network/netconnect.pm:158
#, c-format
-msgid ""
-"Do not update inode access times on this file system\n"
-"(e.g, for faster access on the news spool to speed up news servers)."
+msgid "Bewan USB modem"
msgstr ""
-#: ../../mouse.pm:1
+#: network/netconnect.pm:159
#, c-format
-msgid "3 buttons with Wheel emulation"
+msgid "Bewan PCI modem"
msgstr ""
-#: ../../standalone/drakperm:1
+#: network/netconnect.pm:160
#, c-format
-msgid "Sticky-bit"
+msgid "ECI Hi-Focus modem"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "อื่นๆ"
-
-#: ../../mouse.pm:1
+#: network/netconnect.pm:164
#, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid "Dynamic Host Configuration Protocol (DHCP)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:165
#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Manual TCP/IP configuration"
+msgstr "การคอนฟิก"
-#: ../../diskdrake/interactive.pm:1
+#: network/netconnect.pm:166
#, c-format
-msgid "Sector"
-msgstr "เซ็กเตอร์"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Qatar"
-msgstr "สถานะ:"
+msgid "Point to Point Tunneling Protocol (PPTP)"
+msgstr ""
-#: ../../any.pm:1
+#: network/netconnect.pm:167
#, c-format
-msgid "LDAP Base dn"
+msgid "PPP over Ethernet (PPPoE)"
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: network/netconnect.pm:168
#, c-format
-msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "คุณไม่สามารถเลือก package นี้เนื่องจากคุณมีพื้นที่ไม่เพียงพอ"
+msgid "PPP over ATM (PPPoA)"
+msgstr ""
-#: ../../help.pm:1
+#: network/netconnect.pm:172
#, fuzzy, c-format
-msgid "generate auto-install floppy"
-msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"
+msgid "Bridged Ethernet LLC"
+msgstr "Ethernet Card"
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Dialing mode"
-msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"
+#: network/netconnect.pm:173
+#, fuzzy, c-format
+msgid "Bridged Ethernet VC"
+msgstr "Ethernet Card"
-#: ../../services.pm:1
+#: network/netconnect.pm:174
#, c-format
-msgid "File sharing"
+msgid "Routed IP LLC"
msgstr ""
-#: ../../any.pm:1
+#: network/netconnect.pm:175
#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "ลบ /tmp ตอน boot ทุกครั้ง"
+msgid "Routed IP VC"
+msgstr ""
-#: ../../lang.pm:1
+#: network/netconnect.pm:176
#, c-format
-msgid "Malawi"
+msgid "PPPOA LLC"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "local config: false"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+#: network/netconnect.pm:177
+#, c-format
+msgid "PPPOA VC"
+msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "System settings"
-msgstr "กำลังพาร์ติชั่น Custom disk"
+#: network/netconnect.pm:181 standalone/drakconnect:443
+#: standalone/drakconnect:917
+#, c-format
+msgid "Script-based"
+msgstr "รูปแบบสคริปต์"
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "คุณมีเม้าส์ชนิดใด"
+#: network/netconnect.pm:182 standalone/drakconnect:443
+#: standalone/drakconnect:917
+#, c-format
+msgid "PAP"
+msgstr "PAP"
-#: ../../services.pm:1
+#: network/netconnect.pm:183 standalone/drakconnect:443
+#: standalone/drakconnect:917
#, c-format
-msgid "running"
-msgstr "กำลังทำงาน"
+msgid "Terminal-based"
+msgstr "รูปแบบเทอร์มินอล"
-#: ../../standalone/harddrake2:1
+#: network/netconnect.pm:184 standalone/drakconnect:443
+#: standalone/drakconnect:917
#, c-format
-msgid "class of hardware device"
+msgid "CHAP"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:185
#, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
+msgid "PAP/CHAP"
msgstr ""
-#: ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United Kingdom"
-msgstr "อังกฤษ"
+#: network/netconnect.pm:199 standalone/drakconnect:54
+#, fuzzy, c-format
+msgid "Network & Internet Configuration"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-#: ../../lang.pm:1
+#: network/netconnect.pm:205
#, fuzzy, c-format
-msgid "Indonesia"
-msgstr "ไม่มี"
+msgid "(detected on port %s)"
+msgstr "ค้นหาเจอบน port %s"
-#: ../../standalone/draksec:1
-#, c-format
-msgid "default"
-msgstr "default"
+#. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
+#: network/netconnect.pm:207
+#, fuzzy, c-format
+msgid "(detected %s)"
+msgstr "ค้นพบ %s"
-#: ../../standalone/drakxtv:1
+#: network/netconnect.pm:207
#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "ฝรั่งเศษ"
+msgid "(detected)"
+msgstr "ค้นพบ %s"
-#: ../../any.pm:1
+#: network/netconnect.pm:209
+#, fuzzy, c-format
+msgid "Modem connection"
+msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
+
+#: network/netconnect.pm:210
#, c-format
-msgid "restrict"
-msgstr "จำเพาะ"
+msgid "ISDN connection"
+msgstr "การติดต่อโดยใช้ ISDN"
-#: ../../pkgs.pm:1
+#: network/netconnect.pm:211
+#, fuzzy, c-format
+msgid "ADSL connection"
+msgstr "LAN connection"
+
+#: network/netconnect.pm:212
#, c-format
-msgid "must have"
-msgstr "ต้องมี"
+msgid "Cable connection"
+msgstr "cable connection"
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:213
#, c-format
-msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
-msgstr ""
+msgid "LAN connection"
+msgstr "LAN connection"
-#: ../../lang.pm:1
+#: network/netconnect.pm:214 network/netconnect.pm:228
#, fuzzy, c-format
-msgid "Senegal"
-msgstr "enable"
+msgid "Wireless connection"
+msgstr "cable connection"
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:224
#, fuzzy, c-format
-msgid "Command line"
-msgstr "ชื่อโดเมน"
+msgid "Choose the connection you want to configure"
+msgstr "เลือกเครื่องมือที่คุณต้องการใช้"
-#: ../advertising/08-store.pl:1
-#, c-format
+#: network/netconnect.pm:241
+#, fuzzy, c-format
msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press \"%s\" to continue."
msgstr ""
+"\n"
+"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:249 network/netconnect.pm:710
#, c-format
-msgid "March"
-msgstr "มีนาคม"
+msgid "Connection Configuration"
+msgstr "การคอนฟิก Connection"
-#: ../../any.pm:1
+#: network/netconnect.pm:250 network/netconnect.pm:711
#, c-format
-msgid "access to administrative files"
-msgstr ""
+msgid "Please fill or check the field below"
+msgstr "กรุณาเลือกช่องข้างล่างนี้"
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:256 standalone/drakconnect:494
+#: standalone/drakconnect:899
#, c-format
-msgid ""
-"Error during sendmail.\n"
-" Your report mail was not sent.\n"
-" Please configure sendmail"
-msgstr ""
+msgid "Card IRQ"
+msgstr "Card IRQ"
-#: ../../fs.pm:1
+#: network/netconnect.pm:257 standalone/drakconnect:495
+#: standalone/drakconnect:900
#, c-format
-msgid ""
-"Do not allow set-user-identifier or set-group-identifier\n"
-"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n"
-"have suidperl(1) installed.)"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "Card mem (DMA)"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Montserrat"
-msgstr "พอร์ตของเม้าส์"
+#: network/netconnect.pm:258 standalone/drakconnect:496
+#: standalone/drakconnect:901
+#, c-format
+msgid "Card IO"
+msgstr "Card IO"
-#: ../../help.pm:1
+#: network/netconnect.pm:259 standalone/drakconnect:497
+#: standalone/drakconnect:902
#, c-format
-msgid "Automatic dependencies"
-msgstr ""
+msgid "Card IO_0"
+msgstr "Card IO_0"
-#: ../../diskdrake/hd_gtk.pm:1
+#: network/netconnect.pm:260 standalone/drakconnect:903
#, c-format
-msgid "Swap"
-msgstr "สวอป"
+msgid "Card IO_1"
+msgstr "Card IO_1"
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Custom settings"
-msgstr "กำลังพาร์ติชั่น Custom disk"
+#: network/netconnect.pm:261 standalone/drakconnect:904
+#, c-format
+msgid "Your personal phone number"
+msgstr "เบอร์โทรศัพท์ส่วนตัว"
-#: ../../../move/move.pm:1
+#: network/netconnect.pm:262 network/netconnect.pm:714
+#: standalone/drakconnect:905
#, c-format
-msgid ""
-"The USB key seems to have write protection enabled, but we can't safely\n"
-"unplug it now.\n"
-"\n"
-"\n"
-"Click the button to reboot the machine, unplug it, remove write protection,\n"
-"plug the key again, and launch Mandrake Move again."
-msgstr ""
+msgid "Provider name (ex provider.net)"
+msgstr "ชื่อผู้ให้บริการ (ex KSC)"
+
+#: network/netconnect.pm:263 standalone/drakconnect:440
+#: standalone/drakconnect:906
+#, c-format
+msgid "Provider phone number"
+msgstr "หมายเลขโทรศัพท์"
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:264
#, fuzzy, c-format
-msgid "Restore Other"
-msgstr "เรียกคืนจากไฟล์"
+msgid "Provider DNS 1 (optional)"
+msgstr "ผู้ให้บริการ dns 1 (optional)"
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: network/netconnect.pm:265
+#, fuzzy, c-format
+msgid "Provider DNS 2 (optional)"
+msgstr "ผู้ให้บริการ dns 2 (optional)"
+
+#: network/netconnect.pm:266 standalone/drakconnect:396
+#: standalone/drakconnect:462 standalone/drakconnect:911
#, c-format
-msgid "TV card"
-msgstr "TV card"
+msgid "Dialing mode"
+msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"
-#: ../../printer/main.pm:1
+#: network/netconnect.pm:267 standalone/drakconnect:401
+#: standalone/drakconnect:459 standalone/drakconnect:923
#, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/วินโดวส์ 95/98/NT"
+msgid "Connection speed"
+msgstr "ชนิดการเชื่อมต่อ"
-#: ../../standalone/printerdrake:1
+#: network/netconnect.pm:268 standalone/drakconnect:406
+#: standalone/drakconnect:924
#, fuzzy, c-format
-msgid "/_Configure CUPS"
-msgstr "คอนฟิกระบบ X"
+msgid "Connection timeout (in sec)"
+msgstr "ชนิดการเชื่อมต่อ"
-#: ../../standalone/scannerdrake:1
+#: network/netconnect.pm:271 network/netconnect.pm:717
+#: standalone/drakconnect:438 standalone/drakconnect:909
#, c-format
-msgid ", "
-msgstr ""
+msgid "Account Login (user name)"
+msgstr "Account Login (user name)"
-#: ../../standalone/drakbug:1
+#: network/netconnect.pm:272 network/netconnect.pm:718
+#: standalone/drakconnect:439 standalone/drakconnect:910
+#: standalone/drakconnect:944
#, c-format
-msgid "Submit lspci"
-msgstr ""
+msgid "Account Password"
+msgstr "รหัสผ่าน"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "ลบคิว"
+#: network/netconnect.pm:300
+#, c-format
+msgid "What kind is your ISDN connection?"
+msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
-#: ../../services.pm:1
+#: network/netconnect.pm:301
+#, c-format
+msgid "Internal ISDN card"
+msgstr "Internal ISDN card"
+
+#: network/netconnect.pm:301
+#, c-format
+msgid "External ISDN modem"
+msgstr "External ISDN modem"
+
+#: network/netconnect.pm:332
#, fuzzy, c-format
+msgid "Do you want to start a new configuration ?"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+
+#: network/netconnect.pm:335
+#, c-format
msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix เป็นโปรแกรมทำหน้าที่ส่งจดหมายจากเครื่องหนึ่ง\n"
-"ไปอีกเครื่องหนึ่ง"
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
+msgstr "ผมเจอการ์ด ISDN แบบ PCI แต่ผมไม่ทราบชนิด กรุณาเลือกหนื่งในการ์ด PCI ในหน้าต่อไป"
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Uzbek (cyrillic)"
-msgstr "Azerbaidjani (cyrillic)"
+#: network/netconnect.pm:344
+#, c-format
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "ไม่พบการ์ด ISDN PCI กรุณาเลือกจากหน้าต่อไป"
-#: ../../keyboard.pm:1
+#: network/netconnect.pm:353
#, c-format
msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
msgstr ""
-#: ../../network/network.pm:1
+#: network/netconnect.pm:364
#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+msgid "Select the modem to configure:"
+msgstr "เลือก network interface"
-#: ../../security/help.pm:1
+#: network/netconnect.pm:403
#, c-format
-msgid "if set to yes, reports check result to tty."
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:427
#, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+msgid "Select your provider:"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
-#: ../../standalone/drakgw:1
+#: network/netconnect.pm:429 network/netconnect.pm:599
#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
-msgstr ""
-"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
-"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
-"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
-"\n"
-"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"
+msgid "Provider:"
+msgstr "Profile: "
-#: ../../network/ethernet.pm:1
-#, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"
+#: network/netconnect.pm:481 network/netconnect.pm:482
+#: network/netconnect.pm:483 network/netconnect.pm:508
+#: network/netconnect.pm:525 network/netconnect.pm:541
+#, fuzzy, c-format
+msgid "Manual"
+msgstr "เลือกภาษาที่คุณใช้"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Photo memory card access on your HP multi-function device"
-msgstr ""
+#: network/netconnect.pm:485
+#, fuzzy, c-format
+msgid "Dialup: account options"
+msgstr "อ็อปชั่นของการหมุนโทรศัพท์"
-#: ../advertising/09-mdksecure.pl:1
+#: network/netconnect.pm:488 standalone/drakconnect:913
#, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
+msgid "Connection name"
+msgstr "ชื่อการเชื่อมต่อ"
-#: ../../standalone/printerdrake:1
+#: network/netconnect.pm:489 standalone/drakconnect:914
#, c-format
-msgid "Authors: "
-msgstr ""
+msgid "Phone number"
+msgstr "หมายเลขโทรศัพท์"
-#: ../../standalone/drakgw:1
+#: network/netconnect.pm:490 standalone/drakconnect:915
#, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"
+msgid "Login ID"
+msgstr "หมายเลขประจำตัวการล็อกอิน"
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
-msgstr ""
+#: network/netconnect.pm:505 network/netconnect.pm:538
+#, fuzzy, c-format
+msgid "Dialup: IP parameters"
+msgstr "Parameters"
-#: ../../keyboard.pm:1
+#: network/netconnect.pm:508
+#, fuzzy, c-format
+msgid "IP parameters"
+msgstr "Parameters"
+
+#: network/netconnect.pm:509 network/netconnect.pm:829
+#: printer/printerdrake.pm:431 standalone/drakconnect:113
+#: standalone/drakconnect:306 standalone/drakconnect:764
#, c-format
-msgid "Latin American"
-msgstr "ละตินอเมริกา"
+msgid "IP address"
+msgstr "ค่า IP"
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:510
#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+msgid "Subnet mask"
+msgstr "เน็ตมาสก์"
+
+#: network/netconnect.pm:522
+#, c-format
+msgid "Dialup: DNS parameters"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: network/netconnect.pm:525
#, fuzzy, c-format
-msgid "Old device file"
-msgstr "เลือกไฟล์"
+msgid "DNS"
+msgstr "ใช้ NIS"
-#: ../../diskdrake/interactive.pm:1
+#: network/netconnect.pm:526 standalone/drakconnect:918
#, c-format
-msgid "Info: "
-msgstr "ข้อมูล: "
+msgid "Domain name"
+msgstr "ชื่อโดเมน"
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "พาร์ติชั่น %s"
+#: network/netconnect.pm:527 network/netconnect.pm:715
+#: standalone/drakconnect:919
+#, c-format
+msgid "First DNS Server (optional)"
+msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"
-#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
+#: network/netconnect.pm:528 network/netconnect.pm:716
+#: standalone/drakconnect:920
#, c-format
-msgid "Please wait"
-msgstr "โปรดรอสักครู่"
+msgid "Second DNS Server (optional)"
+msgstr "เซิรฟ์เวอร์ DNS เครื่องที่สอง (optional)"
-#: ../../mouse.pm:1
+#: network/netconnect.pm:529
+#, fuzzy, c-format
+msgid "Set hostname from IP"
+msgstr "ชื่อของเครื่องพิมพ์"
+
+#: network/netconnect.pm:541 standalone/drakconnect:317
+#: standalone/drakconnect:912
#, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid "Gateway"
+msgstr "เกตเวย์"
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:542
#, fuzzy, c-format
-msgid "None"
-msgstr "ทำเรียบร้อยแล้ว"
+msgid "Gateway IP address"
+msgstr "ค่า IP"
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:567
#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "ถูกต้องหรือไม่?"
+msgid "ADSL configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:567 network/netconnect.pm:746
#, fuzzy, c-format
-msgid "Please be sure that the cron daemon is included in your services."
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "Select the network interface to configure:"
+msgstr "เลือก network interface"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
+#: network/netconnect.pm:568 network/netconnect.pm:748 network/shorewall.pm:77
+#: standalone/drakconnect:602 standalone/drakgw:218 standalone/drakvpn:217
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#: ../../standalone/printerdrake:1
+#: network/netconnect.pm:597
#, fuzzy, c-format
-msgid "Delete selected printer"
-msgstr "ลบคิว"
+msgid "Please choose your ADSL provider"
+msgstr "คุณมีเม้าส์ชนิดใด"
-#: ../../services.pm:1 ../../ugtk2.pm:1
+#: network/netconnect.pm:616
#, c-format
-msgid "Info"
-msgstr "ข้อมูล"
+msgid ""
+"You need the Alcatel microcode.\n"
+"You can provide it now via a floppy or your windows partition,\n"
+"or skip and do it later."
+msgstr ""
-#: ../../help.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Install"
-msgstr "ติดตั้ง"
+#: network/netconnect.pm:620 network/netconnect.pm:625
+#, fuzzy, c-format
+msgid "Use a floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
-#: ../../help.pm:1
+#: network/netconnect.pm:620 network/netconnect.pm:629
#, fuzzy, c-format
-msgid ""
-"Click on \"%s\" if you want to delete all data and partitions present on\n"
-"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
-"to recover any data and partitions present on this hard drive, including\n"
-"any Windows data.\n"
-"\n"
-"Click on \"%s\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
+msgid "Use my Windows partition"
+msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"
+
+#: network/netconnect.pm:620 network/netconnect.pm:633
+#, c-format
+msgid "Do it later"
msgstr ""
-"กด \"OK\" ถ้าคุณต้องการลบข้อมูลทั้งหมดบน harddisk นี้\n"
-"นี่รวมถึง partitions ทั้งหมดซึ่งรวมถึง Windows ด้วย\n"
-"\n"
-"\n"
-"กด \"ยกเลิก\" เพื่อยกเสิกการทำงานนี้"
-#: ../../steps.pm:1
+#: network/netconnect.pm:640
#, c-format
-msgid "Exit install"
-msgstr "ออกจากการติดตั้ง"
+msgid "Firmware copy failed, file %s not found"
+msgstr ""
-#: ../../../move/move.pm:1
+#: network/netconnect.pm:647
#, c-format
-msgid "Need a key to save your data"
+msgid "Firmware copy succeeded"
msgstr ""
-#: ../../standalone/drakgw:1
+#: network/netconnect.pm:662
#, c-format
msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+"You need the Alcatel microcode.\n"
+"Download it at:\n"
+"%s\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
msgstr ""
-"ทุกอย่างได้ถูกทำการปรับแต่งเรียบร้อยแล้ว\n"
-"คุณสามารถใช้อินเตอร์เนตบนคอมพิวเตอร์อื่นๆใน LAN โดยใช้ (DHCP)"
-#: ../../install_steps_interactive.pm:1
+#: network/netconnect.pm:719
#, c-format
-msgid "Remote CUPS server"
-msgstr "Remote CUPS server"
+msgid "Virtual Path ID (VPI):"
+msgstr ""
-#: ../../mouse.pm:1
+#: network/netconnect.pm:720
#, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
+msgid "Virtual Circuit ID (VCI):"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: network/netconnect.pm:721
+#, fuzzy, c-format
+msgid "Encapsulation :"
+msgstr "ขอแสดงความยินดี"
+
+#: network/netconnect.pm:736
#, c-format
msgid ""
-"There is only one configured network adapter on your system:\n"
-"\n"
-"%s\n"
+"The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
+"problem.\n"
"\n"
-"I am about to setup your Local Area Network with that adapter."
+"You can find a driver on http://eciadsl.flashtux.org/"
msgstr ""
-"ในเครื่องของคุณมี network adapter อันเดียวที่ได้รับการปรับแต่งแล้ว\n"
-"\n"
-"%s\n"
-"\n"
-"ผมกำลังจะใช้ adapter นี้กับระบบ LAN"
-#: ../../standalone/drakbug:1
+#: network/netconnect.pm:753
+#, fuzzy, c-format
+msgid "No wireless network adapter on your system!"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+
+#: network/netconnect.pm:754 standalone/drakgw:240 standalone/drakpxe:137
#, c-format
-msgid "Submit cpuinfo"
+msgid "No network adapter on your system!"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+
+#: network/netconnect.pm:766
+#, c-format
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
msgstr ""
+"คำเตือน: อุปกรณ์นี้ได้ถูกปรับแต่งให้ใช้ในการต่อเข้า internet\n"
+"คุณสามารถยอมรับค่าต่างๆหรือทำการแก้ใขค่าต่างๆข้างล่างนี้\n"
+" "
-#: ../../install_steps_gtk.pm:1
+#: network/netconnect.pm:784
#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "ออกจากการติดตั้ง"
+msgid "Zeroconf hostname resolution"
+msgstr "ชื่อโฮสต์:"
-#: ../../lang.pm:1
+#: network/netconnect.pm:785 network/netconnect.pm:816
#, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "Estonian"
+msgid "Configuring network device %s (driver %s)"
+msgstr "กำลังคอนฟิกอุปกรณ์เน็ตเวิร์ก %s"
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:786
#, c-format
-msgid "YES"
+msgid ""
+"The following protocols can be used to configure an ethernet connection. "
+"Please choose the one you want to use"
msgstr ""
-#: ../../security/l10n.pm:1
+#: network/netconnect.pm:817
#, c-format
-msgid "Enable \"crontab\" and \"at\" for users"
+msgid ""
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
msgstr ""
+"โปรดกรอกข้อมูลการคอนฟิกค่า IP สำหรับเครื่องนี้\n"
+"ข้อมูลแต่ละอย่างสามารถใส่เข้าไปได้โดยใช้ค่า IP ในรูปแบบตัวเลขคั่นด้วยจุด\n"
+"(dotted-decimal notation) ตัวอย่างเช่น 1.2.3.4"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Devanagari"
-msgstr ""
+#: network/netconnect.pm:824
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "กรุณาทดสอบเม้าส์"
-#: ../../standalone/harddrake2:1
+#: network/netconnect.pm:825
+#, fuzzy, c-format
+msgid "DHCP host name"
+msgstr "ชื่อโฮสต์:"
+
+#: network/netconnect.pm:830 standalone/drakconnect:311
+#: standalone/drakconnect:765 standalone/drakgw:313
#, c-format
-msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
-msgstr ""
+msgid "Netmask"
+msgstr "เน็ตมาสก์"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: network/netconnect.pm:832 standalone/drakconnect:389
#, c-format
-msgid "Total size: %d / %d MB"
-msgstr "ขนาดรวม: %d / %d MB "
+msgid "Track network card id (useful for laptops)"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: network/netconnect.pm:833 standalone/drakconnect:390
#, fuzzy, c-format
-msgid "disabled"
-msgstr "disable"
+msgid "Network Hotplugging"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-#: ../../standalone/scannerdrake:1
+#: network/netconnect.pm:834 standalone/drakconnect:384
#, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Start at boot"
+msgstr "เริ่มทำงานตอน boot"
-#: ../../standalone/drakgw:1
+#: network/netconnect.pm:836 standalone/drakconnect:768
#, c-format
-msgid "Disabling servers..."
-msgstr "ยกเลิกการทำงานของ server"
+msgid "DHCP client"
+msgstr "DHCP client"
-#: ../../standalone/drakboot:1
+#: network/netconnect.pm:846 printer/printerdrake.pm:1349
+#: standalone/drakconnect:569
#, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "การติดตั้ง %s ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
+msgid "IP address should be in format 1.2.3.4"
+msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
-#: ../../standalone/drakboot:1
+#: network/netconnect.pm:849
#, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Warning : IP address %s is usually reserved !"
msgstr ""
-#: ../../install_any.pm:1
+#: network/netconnect.pm:879 network/netconnect.pm:908
#, c-format
-msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
-"\n"
-"Do you really want to install these servers?\n"
+msgid "Please enter the wireless parameters for this card:"
msgstr ""
-#: ../../printer/main.pm:1
+#: network/netconnect.pm:882 standalone/drakconnect:355
+#, fuzzy, c-format
+msgid "Operating Mode"
+msgstr "โหมดผู้เชี่ยวชาญ"
+
+#: network/netconnect.pm:884 standalone/drakconnect:356
#, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
+msgid "Network name (ESSID)"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:885 standalone/drakconnect:357
#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Network ID"
+msgstr "Network interface"
-#: ../../steps.pm:1
+#: network/netconnect.pm:886 standalone/drakconnect:358
#, c-format
-msgid "Install system"
-msgstr "ติดตั้งระบบ"
+msgid "Operating frequency"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: network/netconnect.pm:887 standalone/drakconnect:359
#, c-format
-msgid "First DNS Server (optional)"
-msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"
+msgid "Sensitivity threshold"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:888 standalone/drakconnect:360
#, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
+msgid "Bitrate (in b/s)"
msgstr ""
-#: ../../security/help.pm:1
+#: network/netconnect.pm:894
#, c-format
msgid ""
-"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
-"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
-"symlink /etc/security/msec/server to point to\n"
-"/etc/security/msec/server.<SERVER_LEVEL>.\n"
-"\n"
-"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
-"add a service if it is present in the file during the installation of\n"
-"packages."
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
msgstr ""
-#: ../../keyboard.pm:1
+#: network/netconnect.pm:898
#, c-format
-msgid "Russian (Phonetic)"
-msgstr "รัสเซีย (โฟเนติค)"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "กำลังทำการคอนฟิก"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
+msgstr ""
-#: ../../any.pm:1
+#: network/netconnect.pm:911 standalone/drakconnect:371
#, c-format
-msgid "LILO/grub Installation"
-msgstr "การติดตั้ง LILO/grub"
+msgid "RTS/CTS"
+msgstr ""
-#: ../../keyboard.pm:1
+#: network/netconnect.pm:912
#, c-format
-msgid "Israeli"
-msgstr "อิสราเอล"
+msgid ""
+"RTS/CTS adds a handshake before each packet transmission to make sure that "
+"the\n"
+"channel is clear. This adds overhead, but increase performance in case of "
+"hidden\n"
+"nodes or large number of active nodes. This parameter sets the size of the\n"
+"smallest packet for which the node sends RTS, a value equal to the maximum\n"
+"packet size disable the scheme. You may also set this parameter to auto, "
+"fixed\n"
+"or off."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:919 standalone/drakconnect:372
#, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+msgid "Fragmentation"
+msgstr "Workstation ที่ทำงาน"
-#: ../../standalone/drakTermServ:1
+#: network/netconnect.pm:920 standalone/drakconnect:373
#, c-format
-msgid "Floppy can be removed now"
+msgid "Iwconfig command extra arguments"
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid "Truly minimal install"
-msgstr "ออกจากการติดตั้ง"
-
-#: ../../lang.pm:1
+#: network/netconnect.pm:921
#, c-format
-msgid "Denmark"
+msgid ""
+"Here, one can configure some extra wireless parameters such as:\n"
+"ap, channel, commit, enc, power, retry, sens, txpower (nick is already set "
+"as the hostname).\n"
+"\n"
+"See iwpconfig(8) man page for further information."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
+#: network/netconnect.pm:928 standalone/drakconnect:374
#, c-format
-msgid "Moving partition..."
-msgstr "ย้ายพาร์ติชั่น..."
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
+msgid "Iwspy command extra arguments"
+msgstr ""
-#: ../../Xconfig/test.pm:1
+#: network/netconnect.pm:929
#, c-format
-msgid "Test of the configuration"
-msgstr "ทดสอบการคอนฟิก"
+msgid ""
+"Iwspy is used to set a list of addresses in a wireless network\n"
+"interface and to read back quality of link information for each of those.\n"
+"\n"
+"This information is the same as the one available in /proc/net/wireless :\n"
+"quality of the link, signal strength and noise level.\n"
+"\n"
+"See iwpspy(8) man page for further information."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+#: network/netconnect.pm:937 standalone/drakconnect:375
+#, c-format
+msgid "Iwpriv command extra arguments"
+msgstr ""
-#: ../../help.pm:1
+#: network/netconnect.pm:938
#, c-format
msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
+"Iwpriv enable to set up optionals (private) parameters of a wireless "
+"network\n"
+"interface.\n"
"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes were discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
+"Iwpriv deals with parameters and setting specific to each driver (as opposed "
+"to\n"
+"iwconfig which deals with generic ones).\n"
"\n"
-"The \"%s\" option is used to disable the warning dialog which appears\n"
-"whenever the installer automatically selects a package to resolve a\n"
-"dependency issue. Some packages have relationships between each other such\n"
-"that installation of a package requires that some other program is also\n"
-"rerquired to be installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
+"In theory, the documentation of each device driver should indicate how to "
+"use\n"
+"those interface specific commands and their effect.\n"
"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
+"See iwpriv(8) man page for further information."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: network/netconnect.pm:965
#, c-format
-msgid "Choose your filesystem encryption key"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
msgstr ""
+"ไม่พบการ์ด ethernet \n"
+"ผมไม่สามารถจัดทำการติดต่อชนิดนี้"
-#: ../../lang.pm:1
+#: network/netconnect.pm:969 standalone/drakgw:254 standalone/drakpxe:142
#, c-format
-msgid "Sierra Leone"
+msgid "Choose the network interface"
+msgstr "เลือก network interface"
+
+#: network/netconnect.pm:970
+#, c-format
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"
+
+#: network/netconnect.pm:991
+#, c-format
+msgid ""
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
+msgstr ""
+"โปรดใส่ชื่อของโฮสต์\n"
+"ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
+"ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
+"คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"
+
+#: network/netconnect.pm:995
+#, c-format
+msgid "Last but not least you can also type in your DNS server IP addresses."
msgstr ""
-#: ../../lang.pm:1
+#: network/netconnect.pm:997
#, fuzzy, c-format
-msgid "Botswana"
-msgstr "Estonian"
+msgid "Host name (optional)"
+msgstr "การคอนฟิก"
-#: ../../lang.pm:1
+#: network/netconnect.pm:997
+#, c-format
+msgid "Host name"
+msgstr "ชื่อโฮสต์:"
+
+#: network/netconnect.pm:998
#, fuzzy, c-format
-msgid "Andorra"
-msgstr "ยกเลิก"
+msgid "DNS server 1"
+msgstr "เซิร์ฟเวอร์ DNS"
-#: ../../standalone/draksec:1
+#: network/netconnect.pm:999
#, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Default)"
+msgid "DNS server 2"
+msgstr "เซิร์ฟเวอร์ DNS"
-#: ../../security/help.pm:1
+#: network/netconnect.pm:1000
+#, fuzzy, c-format
+msgid "DNS server 3"
+msgstr "เซิร์ฟเวอร์ DNS"
+
+#: network/netconnect.pm:1001
+#, fuzzy, c-format
+msgid "Search domain"
+msgstr "โดเมน NIS"
+
+#: network/netconnect.pm:1002
#, c-format
-msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
+msgid "By default search domain will be set from the fully-qualified host name"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:1003
#, c-format
-msgid "Alternative test page (Letter)"
+msgid "Gateway (e.g. %s)"
msgstr ""
-#: ../../standalone/drakgw:1
+#: network/netconnect.pm:1005
#, c-format
-msgid ""
-"DHCP Server Configuration.\n"
-"\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
-"\n"
-msgstr ""
+msgid "Gateway device"
+msgstr "อุปกรณ์เกตเวย์"
-#: ../../Xconfig/card.pm:1
+#: network/netconnect.pm:1014
#, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "เลือก X เซิร์ฟเวอร์"
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
-#: ../../../move/tree/mdk_totem:1
-#, c-format
-msgid "Copying to memory to allow removing the CDROM"
-msgstr ""
+#: network/netconnect.pm:1019 standalone/drakconnect:571
+#, fuzzy, c-format
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
-#: ../../install_interactive.pm:1
+#: network/netconnect.pm:1030
#, c-format
-msgid "Swap partition size in MB: "
-msgstr "ขนาดพาร์ติชั่น Swapเป็น MB: "
+msgid ""
+"Enter a Zeroconf host name which will be the one that your machine will get "
+"back to other machines on the network:"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:1031
#, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Zeroconf Host name"
+msgstr "ชื่อโฮสต์:"
-#: ../../diskdrake/interactive.pm:1
+#: network/netconnect.pm:1034
#, c-format
-msgid "Formatted\n"
-msgstr "ฟอร์แมต\n"
+msgid "Zeroconf host name must not contain a ."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: network/netconnect.pm:1044
#, c-format
-msgid "Type of install"
+msgid ""
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/netconnect.pm:1046
#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/วินโดวส์ 95/98/NT"
+msgid "Internet connection"
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+
+#: network/netconnect.pm:1054
+#, fuzzy, c-format
+msgid "Configuration is complete, do you want to apply settings ?"
+msgstr "XFree ชนิดใหนที่คุณต้องการมี"
-#: ../../modules/parameters.pm:1
+#: network/netconnect.pm:1070
#, c-format
-msgid "%d comma separated numbers"
+msgid "Do you want to start the connection at boot?"
+msgstr "คุณต้องการต่อตอน boot หรือไม่"
+
+#: network/netconnect.pm:1094
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-#: ../../services.pm:1
+#: network/netconnect.pm:1100 network/netconnect.pm:1165
#, c-format
-msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
-msgstr ""
+msgid "Network Configuration"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-#: ../../standalone/drakautoinst:1
+#: network/netconnect.pm:1101
#, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Boot Style Configuration"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
-#: ../../lang.pm:1
+#: network/netconnect.pm:1110
#, c-format
-msgid "Barbados"
-msgstr ""
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "คุณต้องการทดสอบต่อเข้า Internet เดี๋ยวนี้หรือไม่"
-#: ../advertising/02-community.pl:1
+#: network/netconnect.pm:1118 standalone/drakconnect:958
#, c-format
+msgid "Testing your connection..."
+msgstr "ทดสอบ connection..."
+
+#: network/netconnect.pm:1134
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "ติดต่อเข้า Internet เรียบร้อย"
+
+#: network/netconnect.pm:1135
+#, fuzzy, c-format
+msgid "For security reasons, it will be disconnected now."
+msgstr "เพื่อความปลอดภัย มันจะหยุดการติดต่อเดี๋ยวนี้"
+
+#: network/netconnect.pm:1136
+#, fuzzy, c-format
msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
msgstr ""
+"ไม่สามารถต่อเข้า Internet \n"
+"ลองทำการคอนฟิกใหม่อีกครั้ง"
-#: ../../standalone/drakbackup:1
+#: network/netconnect.pm:1150
#, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"\n"
+msgstr ""
+"การปรับแต่ง internet/network เรียบร้อยแล้ว\n"
+"\n"
+"ค่าต่างๆจะถูกนำไปใช้เดี๋ยวนี้\n"
-#: ../../standalone/net_monitor:1
+#: network/netconnect.pm:1153
#, c-format
msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
msgstr ""
+"เมื่อทุกอย่างเสร็จสิ้น ผมแนะนำให้ท่านเริ่มทำงาน X windows ใหม่\n"
+"เพื่อป้องกันปัญหา hostname ที่อาจเกิดขึ้นได้"
-#: ../../standalone/net_monitor:1
+#: network/netconnect.pm:1154
#, c-format
-msgid "received"
+msgid ""
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
msgstr ""
-#: ../../security/l10n.pm:1
+#: network/netconnect.pm:1166
#, c-format
-msgid "Enable su only from the wheel group members or for any user"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
msgstr ""
+"เนื่องจากคุณใช้การติดตั้งแบบ network ระบบ network จึงใช้ได้อยู่แล้ว\n"
+"กด OK เพื่อรักษาค่าคอนฟิกเดิมไว้ หรือเลือก ยกเลิกเพื่อปรับแต่งใหม่\n"
-#: ../../standalone/logdrake:1
+#: network/network.pm:314
#, c-format
-msgid "/File/_New"
-msgstr "/ไฟล์/_ใหม่"
+msgid "Proxies configuration"
+msgstr "การคอนฟิก Proxies"
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
+#: network/network.pm:315
+#, c-format
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
-#: ../../standalone/drakTermServ:1
+#: network/network.pm:316
#, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "FTP proxy"
+msgstr "FTP proxy"
-#: ../../security/level.pm:1
+#: network/network.pm:319
#, c-format
-msgid "High"
-msgstr "สูง"
+msgid "Proxy should be http://..."
+msgstr "ค่าของ Proxy ควรจะเป็น http://..."
-#: ../../standalone/printerdrake:1
+#: network/network.pm:320
#, fuzzy, c-format
-msgid "Add a new printer to the system"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "ค่าของ Proxy ควรจะเป็น http://..."
-#: ../../any.pm:1
+#: network/shorewall.pm:26
#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
+msgid "Firewalling configuration detected!"
+msgstr "ตรวจพบคอนฟิกของ Firewall"
-#: ../../standalone/harddrake2:1
+#: network/shorewall.pm:27
#, c-format
-msgid "this field describes the device"
+msgid ""
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/shorewall.pm:70
#, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgid ""
+"Please enter the name of the interface connected to the "
+"internet. \n"
+" \n"
+"Examples:\n"
+" ppp+ for modem or DSL connections, \n"
+" eth0, or eth1 for cable connection, \n"
+" ippp+ for a isdn connection.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: network/tools.pm:207
#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Insert floppy"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
-#: ../../standalone/drakpxe:1
+#: network/tools.pm:208
#, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "การปรับแต่ง LAN"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NIS Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid ""
+"Insert a FAT formatted floppy in drive %s with %s in root directory and "
+"press %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"
-#: ../../standalone/scannerdrake:1
+#: network/tools.pm:209
#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Port"
+msgid "Floppy access error, unable to mount device %s"
+msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Spain"
-msgstr "สเปน"
+#: partition_table.pm:642
+#, c-format
+msgid "mount failed: "
+msgstr "การเม้าท์ล้มเหลว: "
-#: ../../standalone/drakTermServ:1
+#: partition_table.pm:747
#, c-format
-msgid "local config: %s"
+msgid "Extended partition not supported on this platform"
+msgstr "Extended partition not supported on this platform"
+
+#: partition_table.pm:765
+#, c-format
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
msgstr ""
+"คุณมีช่องว่างในตารางพาร์ติชั่น แต่โปรแกรมจะไม่ใช้งานช่องว่างนั้น\n"
+"การแก้ไขปัญหาสามารถทำได้โดยย้ายไพรมารีพาร์ติชั่น เพื่อให้ช่องว่าไปต่อท้ายพาร์ติชั่นแบบ extended"
-#: ../../any.pm:1
+#: partition_table.pm:852
#, c-format
-msgid "This user name has already been added"
-msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
+msgid "Restoring from file %s failed: %s"
+msgstr "การกู้คืนจากไฟล์ %s ล้มเหลว: %s"
-#: ../../interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose a file"
-msgstr "เลือกกิจกรรม"
+#: partition_table.pm:854
+#, c-format
+msgid "Bad backup file"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../standalone/drakconnect:1
+#: partition_table.pm:874
#, c-format
-msgid "Apply"
-msgstr "มีผลทันที"
+msgid "Error writing to file %s"
+msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
-#: ../../standalone/scannerdrake:1
+#: partition_table/raw.pm:181
#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "ใช้ auto detection"
-
-#: ../../lang.pm:1
-#, c-format
-msgid "San Marino"
+msgid ""
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
msgstr ""
+"มีสิ่งไม่ดีเกิดขึ้นกับ disk ของคุณซึ่งเราไม่สามารถตรวจ\n"
+"สอบความถูกต้องของข้อมูลได้\n"
+"นั่นหมายความว่าการเขียนข้อมูลลงไปอาจกลายเป็นขยะ"
-#: ../../standalone/drakgw:1
+#: pkgs.pm:24
#, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "เบลเยี่ยม"
+msgid "must have"
+msgstr "ต้องมี"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Kuwait"
-msgstr "ออก"
+#: pkgs.pm:25
+#, c-format
+msgid "important"
+msgstr "สำคัญ"
-#: ../../any.pm:1
+#: pkgs.pm:26
#, c-format
-msgid "Choose the window manager to run:"
-msgstr "เลือก window manager:"
+msgid "very nice"
+msgstr "ดีมาก"
-#: ../../standalone/drakbackup:1
+#: pkgs.pm:27
#, c-format
-msgid "December"
-msgstr "ธันวาคม"
+msgid "nice"
+msgstr "ดี"
-#: ../../standalone/harddrake2:1
+#: pkgs.pm:28
#, c-format
-msgid "sub generation of the cpu"
-msgstr ""
+msgid "maybe"
+msgstr "อาจจะ"
-#: ../../standalone/drakbug:1
+#: printer/cups.pm:87
+#, fuzzy, c-format
+msgid "(on %s)"
+msgstr "(โมดูล %s)"
+
+#: printer/cups.pm:87
#, c-format
-msgid "First Time Wizard"
+msgid "(on this machine)"
msgstr ""
-#: ../../lang.pm:1
+#: printer/cups.pm:99 standalone/printerdrake:197
#, fuzzy, c-format
-msgid "Taiwan"
-msgstr "ตำแหน่ง"
+msgid "Configured on other machines"
+msgstr "ปรับแต่งการบริการต่างๆ"
-#: ../../lang.pm:1
+#: printer/cups.pm:101
+#, fuzzy, c-format
+msgid "On CUPS server \"%s\""
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
+
+#: printer/cups.pm:101 printer/printerdrake.pm:3784
+#: printer/printerdrake.pm:3793 printer/printerdrake.pm:3934
+#: printer/printerdrake.pm:3945 printer/printerdrake.pm:4157
#, c-format
-msgid "Pakistan"
-msgstr ""
+msgid " (Default)"
+msgstr " (Default)"
-#: ../../standalone/logdrake:1
+#: printer/data.pm:21
#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "โปรดกรุณารอ,parsing file:%s"
+msgid "PDQ - Print, Don't Queue"
+msgstr ""
-#: ../../install_steps.pm:1 ../../../move/move.pm:1
+#: printer/data.pm:22
#, c-format
-msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+msgid "PDQ"
msgstr ""
-"มีความผิดพลาดเกิดขึ้น แต่โปรแกรมไม่สามารถแก้ไขได้\n"
-"หากทำงานต่ออาจเกิดความเสียหายได้"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Importance: "
-msgstr "ความสำคัญ: %s\n"
+#: printer/data.pm:33
+#, c-format
+msgid "LPD - Line Printer Daemon"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/data.pm:34
#, c-format
-msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+msgid "LPD"
msgstr ""
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Permissions"
-msgstr "เวอร์ชั่น: %s\n"
+#: printer/data.pm:55
+#, c-format
+msgid "LPRng - LPR New Generation"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: printer/data.pm:56
#, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "ชื่อผู้ให้บริการ (ex KSC)"
+msgid "LPRng"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: printer/data.pm:81
#, c-format
-msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+msgid "CUPS - Common Unix Printing System"
msgstr ""
-"เครื่องของคุณมีทรัพยากรค่อนข้างต่ำคุณอาจมีปัญหาติดตั้ง \n"
-"Mandrake Linux ถ้าเป็นเช่นนั้น กรุณาทดลองติดตั้งแบบ text \n"
-"กรุณากด F1 ขณะ boot จาก cdrom แล้วพิมพ์ text"
-#: ../../install_interactive.pm:1
+#: printer/detect.pm:148 printer/detect.pm:226 printer/detect.pm:428
+#: printer/detect.pm:465 printer/printerdrake.pm:679
#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "ใช้ windows partion สำหรับการ Loopback"
+msgid "Unknown Model"
+msgstr ""
-#: ../../keyboard.pm:1
+#: printer/main.pm:28
#, c-format
-msgid "Armenian (typewriter)"
-msgstr "อาร์เมเนียน (พิมพ์ดีด)"
+msgid "Local printer"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: printer/main.pm:29
#, c-format
-msgid "Connection type: "
-msgstr "ชนิดการเชื่อมต่อ"
+msgid "Remote printer"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../install_steps_interactive.pm:1
+#: printer/main.pm:30
#, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
+msgid "Printer on remote CUPS server"
+msgstr "Remote CUPS server"
-#: ../../lang.pm:1
+#: printer/main.pm:31 printer/printerdrake.pm:1372
+#, fuzzy, c-format
+msgid "Printer on remote lpd server"
+msgstr "รีโมต lpd"
+
+#: printer/main.pm:32
#, c-format
-msgid "Chad"
-msgstr ""
+msgid "Network printer (TCP/Socket)"
+msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
-#: ../../lang.pm:1
+#: printer/main.pm:33
#, fuzzy, c-format
-msgid "India"
-msgstr "Iranian"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/วินโดวส์ 95/98/NT"
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s with 3D hardware acceleration"
+#: printer/main.pm:34
+#, fuzzy, c-format
+msgid "Printer on NetWare server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#: ../../lang.pm:1
+#: printer/main.pm:35 printer/printerdrake.pm:1376
#, fuzzy, c-format
-msgid "Slovakia"
-msgstr "สโลวาเนีย"
+msgid "Enter a printer device URI"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
-#: ../../lang.pm:1
+#: printer/main.pm:36
#, c-format
-msgid "Singapore"
+msgid "Pipe job into a command"
msgstr ""
-#: ../../lang.pm:1
+#: printer/main.pm:306 printer/main.pm:574 printer/main.pm:1544
+#: printer/main.pm:2217 printer/printerdrake.pm:1781
+#: printer/printerdrake.pm:4191
#, c-format
-msgid "Cambodia"
+msgid "Unknown model"
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: printer/main.pm:331 standalone/printerdrake:196
+#, fuzzy, c-format
+msgid "Configured on this machine"
+msgstr "คอนฟิกเม้าส์"
+
+#: printer/main.pm:337 printer/printerdrake.pm:948
#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "อัตราความถี่กวาดตามแนวนอน: %s\n"
+msgid " on parallel port #%s"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: printer/main.pm:340 printer/printerdrake.pm:950
#, c-format
-msgid "Path"
+msgid ", USB printer #%s"
msgstr ""
-#: ../../standalone/drakbug:1
+#: printer/main.pm:342
+#, fuzzy, c-format
+msgid ", USB printer"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: printer/main.pm:347
#, c-format
-msgid "NOT FOUND"
+msgid ", multi-function device on parallel port #%s"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/main.pm:350
+#, fuzzy, c-format
+msgid ", multi-function device on a parallel port"
+msgstr "ชื่อของเครื่องพิมพ์"
+
+#: printer/main.pm:352
#, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid ", multi-function device on USB"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/main.pm:354
#, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid ", multi-function device on HP JetDirect"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+#: printer/main.pm:356
+#, c-format
+msgid ", multi-function device"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: printer/main.pm:359
#, fuzzy, c-format
-msgid "Add host"
-msgstr "เพิ่มผู้ใช้"
+msgid ", printing to %s"
+msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
-#: ../../harddrake/sound.pm:1
+#: printer/main.pm:361
#, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
+msgid " on LPD server \"%s\", printer \"%s\""
msgstr ""
-#: ../../any.pm:1
+#: printer/main.pm:363
#, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
+msgid ", TCP/IP host \"%s\", port %s"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: printer/main.pm:367
#, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid " on SMB/Windows server \"%s\", share \"%s\""
msgstr ""
-#: ../../../move/tree/mdk_totem:1
+#: printer/main.pm:371
#, c-format
-msgid "No CDROM support"
+msgid " on Novell server \"%s\", printer \"%s\""
msgstr ""
-#: ../../standalone/drakxtv:1
+#: printer/main.pm:373
#, c-format
-msgid "China (broadcast)"
+msgid ", using command %s"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/main.pm:388
#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Parallel port #%s"
+msgstr "ชื่อของเครื่องพิมพ์"
-#: ../../printer/printerdrake.pm:1
+#: printer/main.pm:391 printer/printerdrake.pm:964 printer/printerdrake.pm:987
+#: printer/printerdrake.pm:1005
#, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "การคอนฟิกเครื่องพิมพ์"
+msgid "USB printer #%s"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../fs.pm:1
-#, c-format
-msgid ""
-"Do not allow execution of any binaries on the mounted\n"
-"file system. This option might be useful for a server that has file systems\n"
-"containing binaries for architectures other than its own."
-msgstr ""
+#: printer/main.pm:393
+#, fuzzy, c-format
+msgid "USB printer"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../network/netconnect.pm:1
+#: printer/main.pm:398
#, fuzzy, c-format
-msgid "Internet connection"
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+msgid "Multi-function device on parallel port #%s"
+msgstr "ชื่อของเครื่องพิมพ์"
-#: ../../modules/interactive.pm:1
+#: printer/main.pm:401
+#, fuzzy, c-format
+msgid "Multi-function device on a parallel port"
+msgstr "ชื่อของเครื่องพิมพ์"
+
+#: printer/main.pm:403
#, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "Multi-function device on USB"
msgstr ""
-"การโหลดโมดูล %s ล้มเหลว\n"
-"คุณต้องการให้ทดลองอีกครั้งด้วยพารามิเตอร์อื่นๆอีกหรือไม่?"
-#: ../advertising/01-thanks.pl:1
+#: printer/main.pm:405
#, c-format
-msgid "Welcome to the Open Source world."
+msgid "Multi-function device on HP JetDirect"
msgstr ""
-#: ../../lang.pm:1
+#: printer/main.pm:407
#, c-format
-msgid "Bosnia and Herzegovina"
+msgid "Multi-function device"
msgstr ""
-#: ../../fsedit.pm:1
+#: printer/main.pm:410
#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"
+msgid "Prints into %s"
+msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
-#: ../../standalone/scannerdrake:1
+#: printer/main.pm:412
#, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "กรุณาทดสอบเม้าส์"
+msgid "LPD server \"%s\", printer \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: printer/main.pm:414
#, c-format
-msgid "Netherlands"
-msgstr "เนเธอร์แลนด์"
+msgid "TCP/IP host \"%s\", port %s"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/main.pm:418
#, fuzzy, c-format
-msgid "Sending files by FTP"
-msgstr "บันทึกลงไฟล์"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Internal ISDN card"
+msgid "SMB/Windows server \"%s\", share \"%s\""
+msgstr "SMB/วินโดวส์ 95/98/NT"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
-msgstr ""
+#: printer/main.pm:422
+#, fuzzy, c-format
+msgid "Novell server \"%s\", printer \"%s\""
+msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
-#: ../../network/modem.pm:1
+#: printer/main.pm:424
#, fuzzy, c-format
-msgid "Title"
-msgstr "Table"
+msgid "Uses command %s"
+msgstr "Port"
-#: ../../standalone/drakfont:1
+#: printer/main.pm:426
#, c-format
-msgid "Install & convert Fonts"
+msgid "URI: %s"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/main.pm:571 printer/printerdrake.pm:725
+#: printer/printerdrake.pm:2331
#, c-format
-msgid "WARNING"
+msgid "Raw printer (No driver)"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: printer/main.pm:1085 printer/printerdrake.pm:179
+#: printer/printerdrake.pm:191
#, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "ติดตั้งบูตโหลดเดอร์"
+msgid "Local network(s)"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
-#: ../../standalone/drakautoinst:1
+#: printer/main.pm:1087 printer/printerdrake.pm:195
#, fuzzy, c-format
-msgid "replay"
-msgstr "เรียกอีกครั้ง"
+msgid "Interface \"%s\""
+msgstr "Interface %s"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected %s"
-msgstr "ค้นพบ %s"
+#: printer/main.pm:1089
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Network interface"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Expect is an extension to the Tcl scripting language that allows interactive "
-"sessions without user intervention."
-msgstr ""
+#: printer/main.pm:1091
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "ชื่อโฮสต์:"
-#: ../../lang.pm:1
+#: printer/main.pm:1120
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Port"
+
+#: printer/printerdrake.pm:22
#, c-format
-msgid "Virgin Islands (U.S.)"
+msgid ""
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
msgstr ""
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: printer/printerdrake.pm:62
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "การคอนฟิก Internet"
-#: ../../standalone/drakgw:1
+#: printer/printerdrake.pm:63
#, c-format
msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:64
#, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:67
#, c-format
-msgid "Pipe into command"
+msgid "The printers on this machine are available to other computers"
msgstr ""
-#: ../../install_interactive.pm:1
+#: printer/printerdrake.pm:69
#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
+msgid "Automatically find available printers on remote machines"
msgstr ""
-"hardware บางชนิดต้องการ driver พิเศษ\n"
-"คุณสามารถหาข้อมูลได้จาก: %s"
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:71
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "เครื่องพิมพ์"
+
+#: printer/printerdrake.pm:73
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "การคอนฟิก"
+
+#: printer/printerdrake.pm:78 standalone/scannerdrake:554
+#: standalone/scannerdrake:571
+#, fuzzy, c-format
+msgid "No remote machines"
+msgstr "เครื่องพิมพ์แบบรีโมท"
+
+#: printer/printerdrake.pm:88
+#, fuzzy, c-format
+msgid "Additional CUPS servers: "
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
+
+#: printer/printerdrake.pm:93
+#, fuzzy, c-format
+msgid "None"
+msgstr "ทำเรียบร้อยแล้ว"
+
+#: printer/printerdrake.pm:95
#, c-format
-msgid "Haiti"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Detecting devices..."
-msgstr "กำลังตรวจสอบอุปกรณ์..."
+#: printer/printerdrake.pm:100
+#, fuzzy, c-format
+msgid "Japanese text printing mode"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:101
#, c-format
msgid ""
-"Custom allows you to specify your own day and time. The other options use "
-"run-parts in /etc/crontab."
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:105
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Boot Style Configuration"
+
+#: printer/printerdrake.pm:107
#, c-format
msgid ""
-"Description of the fields:\n"
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
msgstr ""
-#: ../../standalone/draksec:1
+#: printer/printerdrake.pm:129 printer/printerdrake.pm:205
#, fuzzy, c-format
-msgid "Basic options"
-msgstr "/Options/ทดลอง"
+msgid "Sharing of local printers"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:130
#, c-format
-msgid "the name of the CPU"
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
msgstr ""
-#: ../../security/l10n.pm:1
+#: printer/printerdrake.pm:141
#, c-format
-msgid "Accept bogus IPv4 error messages"
+msgid "Add host/network"
+msgstr ""
+
+#: printer/printerdrake.pm:147
+#, c-format
+msgid "Edit selected host/network"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:156
#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "อ่าน CUPS drivers database..."
+msgid "Remove selected host/network"
+msgstr "ลบคิว"
-#: ../../install2.pm:1
+#: printer/printerdrake.pm:187 printer/printerdrake.pm:197
+#: printer/printerdrake.pm:210 printer/printerdrake.pm:217
+#: printer/printerdrake.pm:248 printer/printerdrake.pm:266
#, c-format
-msgid "You must also format %s"
+msgid "IP address of host/network:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:206
#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "ระวัง การทำงานนี้อันตราย"
+msgid ""
+"Choose the network or host on which the local printers should be made "
+"available:"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+#: printer/printerdrake.pm:213
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Server: "
-msgstr "เซิร์ฟเวอร์"
+#: printer/printerdrake.pm:221
+#, c-format
+msgid "The entered host/network IP is not correct.\n"
+msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+#: printer/printerdrake.pm:222 printer/printerdrake.pm:400
+#, c-format
+msgid "Examples for correct IPs:\n"
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: printer/printerdrake.pm:246
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
+msgstr ""
+
+#: printer/printerdrake.pm:316 printer/printerdrake.pm:387
#, fuzzy, c-format
-msgid "Sweden"
-msgstr "สวีเดน"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Remote CUPS server"
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:317
#, c-format
-msgid "Use Expect for SSH"
+msgid ""
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:328
#, fuzzy, c-format
-msgid "Poland"
-msgstr "ไอซ์แลนด์"
+msgid "Add server"
+msgstr "เพิ่มผู้ใช้"
-#: ../../network/drakfirewall.pm:1
+#: printer/printerdrake.pm:334
#, fuzzy, c-format
-msgid "Other ports"
-msgstr "กำลังตรวจสอบพอร์ต"
+msgid "Edit selected server"
+msgstr "ค้นพบ %s"
-#: ../../harddrake/v4l.pm:1
+#: printer/printerdrake.pm:343
+#, fuzzy, c-format
+msgid "Remove selected server"
+msgstr "ลบคิว"
+
+#: printer/printerdrake.pm:388
#, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid "Enter IP address and port of the host whose printers you want to use."
msgstr ""
-#: ../../network/adsl.pm:1
-#, fuzzy, c-format
-msgid " - detected"
-msgstr "ค้นพบ %s"
-
-#: ../../harddrake/data.pm:1
+#: printer/printerdrake.pm:389
#, c-format
-msgid "SMBus controllers"
+msgid "If no port is given, 631 will be taken as default."
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: printer/printerdrake.pm:393
#, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "ชนิดการเชื่อมต่อ"
+msgid "Server IP missing!"
+msgstr "ชื่อของเครื่องพิมพ์"
+
+#: printer/printerdrake.pm:399
+#, fuzzy, c-format
+msgid "The entered IP is not correct.\n"
+msgstr "ถูกต้องหรือไม่?"
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:411 printer/printerdrake.pm:1582
+#, fuzzy, c-format
+msgid "The port number should be an integer!"
+msgstr "Port number ควรเป็นตัวเลข"
+
+#: printer/printerdrake.pm:422
#, c-format
-msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+msgid "This server is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:433 printer/printerdrake.pm:1603
+#: standalone/harddrake2:64
#, c-format
-msgid "Croatian"
-msgstr "Croatian"
+msgid "Port"
+msgstr "Port"
-#: ../../help.pm:1
+#: printer/printerdrake.pm:478 printer/printerdrake.pm:545
+#: printer/printerdrake.pm:605 printer/printerdrake.pm:621
+#: printer/printerdrake.pm:704 printer/printerdrake.pm:761
+#: printer/printerdrake.pm:787 printer/printerdrake.pm:1800
+#: printer/printerdrake.pm:1808 printer/printerdrake.pm:1830
+#: printer/printerdrake.pm:1857 printer/printerdrake.pm:1892
+#: printer/printerdrake.pm:1929 printer/printerdrake.pm:1939
+#: printer/printerdrake.pm:2182 printer/printerdrake.pm:2187
+#: printer/printerdrake.pm:2326 printer/printerdrake.pm:2436
+#: printer/printerdrake.pm:2901 printer/printerdrake.pm:2966
+#: printer/printerdrake.pm:3000 printer/printerdrake.pm:3003
+#: printer/printerdrake.pm:3122 printer/printerdrake.pm:3184
+#: printer/printerdrake.pm:3256 printer/printerdrake.pm:3277
+#: printer/printerdrake.pm:3286 printer/printerdrake.pm:3377
+#: printer/printerdrake.pm:3475 printer/printerdrake.pm:3481
+#: printer/printerdrake.pm:3488 printer/printerdrake.pm:3534
+#: printer/printerdrake.pm:3574 printer/printerdrake.pm:3586
+#: printer/printerdrake.pm:3597 printer/printerdrake.pm:3606
+#: printer/printerdrake.pm:3619 printer/printerdrake.pm:3689
+#: printer/printerdrake.pm:3740 printer/printerdrake.pm:3805
+#: printer/printerdrake.pm:4065 printer/printerdrake.pm:4108
+#: printer/printerdrake.pm:4254 printer/printerdrake.pm:4312
+#: printer/printerdrake.pm:4341 standalone/printerdrake:65
+#: standalone/printerdrake:85 standalone/printerdrake:515
#, fuzzy, c-format
-msgid "Use existing partition"
-msgstr "ใช้พาร์ติชั่นที่มีอยู่"
+msgid "Printerdrake"
+msgstr "เครื่องพิมพ์"
-#: ../../install_steps_interactive.pm:1
+#: printer/printerdrake.pm:479
#, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "ไม่สามารถ forkได้.%s"
+msgid "Restarting CUPS..."
+msgstr "จำเพาะ"
-#: ../../standalone/logdrake:1
+#: printer/printerdrake.pm:502
#, c-format
-msgid "/Help/_About..."
-msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."
+msgid "Select Printer Connection"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:503
#, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "How is the printer connected?"
+msgstr "เครื่องพิมพ์เชื่อมต่ออย่างไร?"
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: printer/printerdrake.pm:505
+#, fuzzy, c-format
msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\n"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
msgstr ""
+"เวลาใช้ CUPS SERVER คุณไม่จำเป็นต้องปรับแต่งเครื่องพิมพ์\n"
+"ในตอนนี้ เครื่องพิมพ์จะถูกค้นหาเอง\n"
+"กรณีมีข้อสงสัย กรุณาเลือก \"Remote CUPS server\""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "CUPS printer configuration"
-msgstr "การคอนฟิก Internet"
-
-#: ../../standalone/drakfont:1
+#: printer/printerdrake.pm:508 printer/printerdrake.pm:3807
#, c-format
-msgid "could not find any font in your mounted partitions"
+msgid ""
+"\n"
+"WARNING: No local network connection active, remote printers can neither be "
+"detected nor tested!"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:515
#, c-format
-msgid "F00f bug"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
msgstr ""
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../standalone/drakTermServ:1
+#: printer/printerdrake.pm:545
#, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "ชื่อโดเมน"
+msgid "Checking your system..."
+msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
-#: ../../security/l10n.pm:1
+#: printer/printerdrake.pm:560
#, fuzzy, c-format
-msgid "Root umask"
-msgstr "ไม่มีรหัสผ่าน"
+msgid "and one unknown printer"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../any.pm:1
+#: printer/printerdrake.pm:562
#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
-
-#: ../../security/l10n.pm:1
-#, c-format
-msgid "Reboot by the console user"
-msgstr ""
+msgid "and %d unknown printers"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:566
#, fuzzy, c-format
-msgid "Restore"
-msgstr "เรียกคืนจากไฟล์"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
-#: ../../standalone/drakclock:1
+#: printer/printerdrake.pm:568
#, fuzzy, c-format
-msgid "Server:"
-msgstr "เซิร์ฟเวอร์"
-
-#: ../../security/help.pm:1
-#, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "กำลังหาแพ็คเก็จที่มีอยู่"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
-#: ../../../move/move.pm:1
+#: printer/printerdrake.pm:569
#, fuzzy, c-format
-msgid "Please wait, setting up system configuration files on USB key..."
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+msgid ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"is directly connected to your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
-#: ../../any.pm:1
+#: printer/printerdrake.pm:573
#, c-format
-msgid "Init Message"
-msgstr "ข้อความ init"
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
-#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:574
#, c-format
-msgid "Rescue partition table"
-msgstr "กู้ตารางพาร์ติชั่น"
+msgid ""
+"\n"
+"There are %d unknown printers directly connected to your system"
+msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:577
#, c-format
-msgid "Cyprus"
+msgid ""
+"There are no printers found which are directly connected to your machine"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: printer/printerdrake.pm:580
#, fuzzy, c-format
-msgid "Connection complete."
-msgstr "ชนิดการเชื่อมต่อ"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:593
#, c-format
-msgid "Remove from RAID"
-msgstr "ลบออกจาก RAID"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:594
#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
-#: ../../standalone/drakbug:1
+#: printer/printerdrake.pm:596
#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Network Configuration Wizard"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "คุณต้องการต่อตอน boot หรือไม่"
-#: ../../network/netconnect.pm:1
+#: printer/printerdrake.pm:597
#, c-format
-msgid "ISDN connection"
-msgstr "การติดต่อโดยใช้ ISDN"
+msgid "Are you sure that you want to set up printing on this machine?\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:598
#, c-format
-msgid "CD-R / DVD-R"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:622
+#, fuzzy, c-format
+msgid "Searching for new printers..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+
+#: printer/printerdrake.pm:706
+#, fuzzy, c-format
+msgid "Configuring printer ..."
+msgstr "การคอนฟิกเครื่องพิมพ์"
+
+#: printer/printerdrake.pm:707 printer/printerdrake.pm:762
+#: printer/printerdrake.pm:3598
+#, fuzzy, c-format
+msgid "Configuring printer \"%s\"..."
+msgstr "การคอนฟิกเครื่องพิมพ์"
+
+#: printer/printerdrake.pm:727
#, c-format
-msgid "primary"
+msgid "("
msgstr ""
-#: ../../printer/main.pm:1
+#: printer/printerdrake.pm:728
#, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid " on "
msgstr ""
-#: ../../help.pm:1
+#: printer/printerdrake.pm:729 standalone/scannerdrake:130
#, c-format
-msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not needed at boot\n"
-"time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+msgid ")"
msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:734 printer/printerdrake.pm:2338
#, fuzzy, c-format
-msgid "Niue"
-msgstr "NoVideo"
+msgid "Printer model selection"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
-#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Skip"
-msgstr "ข้ามไป"
+#: printer/printerdrake.pm:735 printer/printerdrake.pm:2339
+#, fuzzy, c-format
+msgid "Which printer model do you have?"
+msgstr "คุณมีเครื่องพิมพ์ชนิดใด?"
-#: ../../services.pm:1
+#: printer/printerdrake.pm:736
#, c-format
msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
msgstr ""
-"Activates/Deactivates network interfaces ทั้งหมด ที่ถูกตั้งให้\n"
-"เริ่มทำงานตอน boot"
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:739 printer/printerdrake.pm:2344
#, c-format
msgid ""
-"the CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
msgstr ""
-#: ../../pkgs.pm:1
-#, c-format
-msgid "important"
-msgstr "สำคัญ"
+#: printer/printerdrake.pm:788 printer/printerdrake.pm:3587
+#: printer/printerdrake.pm:3741 printer/printerdrake.pm:4066
+#: printer/printerdrake.pm:4109 printer/printerdrake.pm:4313
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "การคอนฟิกเครื่องพิมพ์"
-#: ../../standalone/printerdrake:1
+#: printer/printerdrake.pm:824 printer/printerdrake.pm:836
+#: printer/printerdrake.pm:894 printer/printerdrake.pm:1787
+#: printer/printerdrake.pm:3823 printer/printerdrake.pm:4006
#, fuzzy, c-format
-msgid "Mandrake Linux Printer Management Tool"
-msgstr "การติดตั้งลีนุกซ์-แมนเดรก %s"
+msgid "Add a new printer"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:825
#, c-format
-msgid "Total Progress"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
+#: printer/printerdrake.pm:838
+#, c-format
msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, you'll have to specify your hardware by hand.\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX จะพยายามหา PCI SCSI adapter(s) ถ้า DrakX\n"
-"หาเจอ SCSI adapter และรู้ว่าควรใช้ไดร์เวอร์อะไร มันก็จะ\n"
-"ถูกติดตั้งโดยออโตเมติก\n"
+"Please plug in and turn on all printers connected to this machine so that it/"
+"they can be auto-detected. Also your network printer(s) and your Windows "
+"machines must be connected and turned on.\n"
"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
"\n"
-"ถ้าคุณมี SCSI adapter ISA adapter หรือ PCI SCSI adapter ที่ DrakX\n"
-"ไม่สามารถหาเจอ คุณจะโดนถามว่ามี SCSI adapter ในเครื่องของคุณ\n"
-"หรือไม่ ถ้าไม่มีกรุณากดที่ \"ไม่\" แต่ถ้าคุณกดลงที่ \"ไช่\" คุณจะต้องเลือก\n"
-"ชนิดของ adapter ที่คุณมีอยู่\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
+
+#: printer/printerdrake.pm:847
+#, c-format
+msgid ""
"\n"
+"Welcome to the Printer Setup Wizard\n"
"\n"
-"ถ้าคุณเป็นคนเลือก Adapter เอง DrakX จะถามว่าคุณจะป้อนข้อมูล\n"
-"Option หรือไม่ ถึงตรงนี้คุณควรจะให้ DrakX ค้นหา option ที่เหมาะสม\n"
-"ซึ่งโดยทั่วไปมันจะสามารถหาได้เองอย่างถูกต้อง\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
"\n"
+"Please plug in and turn on all printers connected to this machine so that it/"
+"they can be auto-detected.\n"
"\n"
-"แต่ถ้าไม่สำเร็จคุณจำเป็นที่จะต้องให้ข้อมูล Option เอง คุณควรหาข้อมูลเพิ่ม\n"
-"เติมได้จากคู่มือ (บทที่ 3 ตอน Collective informations on your hardware ) หรือ \n"
-"จาก Web Site ของผู้ผลิต หรือ จาก Microsoft Windows ถ้าคุณมีติดตั้ง"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "ชื่อผู้ใช้"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: printer/printerdrake.pm:855
#, c-format
-msgid "Preparing bootloader..."
-msgstr "กำลังเตรียมบูตโหลดเดอร์"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
-#: ../../../move/move.pm:1
+#: printer/printerdrake.pm:864
#, c-format
-msgid "Enter your user information, password will be used for screensaver"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
msgstr ""
-#: ../../network/network.pm:1
+#: printer/printerdrake.pm:873
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "เครื่องพิมพ์แบบรีโมท"
+
+#: printer/printerdrake.pm:876
#, c-format
-msgid "Gateway (e.g. %s)"
+msgid "Auto-detect printers connected directly to the local network"
msgstr ""
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: printer/printerdrake.pm:879
#, c-format
-msgid "The passwords do not match"
-msgstr "รหัสผ่านไม่เหมือนกัน"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:895
#, c-format
-msgid "Examples for correct IPs:\n"
+msgid ""
+"\n"
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the %s Control Center."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:930 printer/printerdrake.pm:1060
+#: printer/printerdrake.pm:1276 printer/printerdrake.pm:1516
#, fuzzy, c-format
-msgid "Please choose the media for backup."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+msgid "Printer auto-detection"
+msgstr "ใช้ auto detection"
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:930
#, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Detecting devices..."
+msgstr "กำลังตรวจสอบอุปกรณ์..."
-#: ../../install_any.pm:1
+#: printer/printerdrake.pm:952
#, c-format
-msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+msgid ", network printer \"%s\", port %s"
msgstr ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the number of the processor"
-msgstr ""
+#: printer/printerdrake.pm:954
+#, fuzzy, c-format
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/วินโดวส์ 95/98/NT"
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: printer/printerdrake.pm:958
#, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"
+msgid "Detected %s"
+msgstr "ค้นพบ %s"
-#: ../../network/isdn.pm:1
+#: printer/printerdrake.pm:962 printer/printerdrake.pm:985
+#: printer/printerdrake.pm:1002
#, fuzzy, c-format
-msgid "Do you want to start a new configuration ?"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+msgid "Printer on parallel port #%s"
+msgstr "ชื่อของเครื่องพิมพ์"
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:966
#, fuzzy, c-format
-msgid "Give a file name"
-msgstr "ชื่อเต็ม"
+msgid "Network printer \"%s\", port %s"
+msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:968
#, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/วินโดวส์ 95/98/NT"
-#: ../../standalone/livedrake:1
-#, c-format
-msgid "Change Cd-Rom"
-msgstr "เปลี่ยน CD-ROM"
+#: printer/printerdrake.pm:1047
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:1048
#, c-format
-msgid "Paraguay"
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../network/netconnect.pm:1
+#: printer/printerdrake.pm:1052
#, fuzzy, c-format
-msgid "Configuration is complete, do you want to apply settings ?"
-msgstr "XFree ชนิดใหนที่คุณต้องการมี"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Use Incremental/Differential Backups (do not replace old backups)"
-msgstr ""
+msgid "You must enter a device or file name!"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-" - Maintain /etc/dhcpd.conf:\n"
-" \tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP \n"
-" \taddress and net boot images to the machine. drakTermServ helps "
-"create/remove \n"
-" \tthese entries.\n"
-"\t\t\t\n"
-" \t(PCI cards may omit the image - etherboot will request the correct "
-"image. \n"
-"\t\t\tYou should also consider that when etherboot looks for the images, it "
-"expects \n"
-"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-" \tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:"
-msgstr ""
+#: printer/printerdrake.pm:1061
+#, fuzzy, c-format
+msgid "No printer found!"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "There's no known driver for your sound card (%s)"
-msgstr ""
+#: printer/printerdrake.pm:1069
+#, fuzzy, c-format
+msgid "Local Printers"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "force"
-msgstr "บังคับ"
+#: printer/printerdrake.pm:1070
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:1074 printer/printerdrake.pm:1083
#, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
+msgid "The following printer was auto-detected. "
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:1076
#, c-format
msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: printer/printerdrake.pm:1077
#, c-format
msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+"Alternatively, you can specify a device name/file name in the input line"
msgstr ""
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:1078 printer/printerdrake.pm:1087
#, c-format
-msgid "Estonian"
-msgstr "Estonian"
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
-#: ../../services.pm:1
+#: printer/printerdrake.pm:1080
#, c-format
msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache คือ World Wide Web server"
+"Please choose the printer you want to set up or enter a device name/file "
+"name in the input line"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:1081
#, c-format
msgid ""
-"Enter your CD Writer device name\n"
-" ex: 0,1,0"
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
msgstr ""
-#: ../../standalone/draksec:1
+#: printer/printerdrake.pm:1085
#, c-format
-msgid "ALL"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP Client"
-
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: printer/printerdrake.pm:1086
#, c-format
-msgid "Choose the network interface"
-msgstr "เลือก network interface"
-
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Unknown Model"
+msgid "Currently, no alternative possibility is available"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: printer/printerdrake.pm:1089
#, c-format
-msgid "CD/DVD burners"
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:1090
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+
+#: printer/printerdrake.pm:1092
#, c-format
msgid ""
-"Partition booted by default\n"
-" (for MS-DOS boot, not for lilo)\n"
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
msgstr ""
-"พาร์ติชั่นที่กำหนดให้บูตซึ่งกำหนดไว้แล้ว\n"
-" (สำหรับบูตของ MS-DOS ไม่ใช่ lilo)\n"
-#: ../../standalone/drakperm:1
+#: printer/printerdrake.pm:1093
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+
+#: printer/printerdrake.pm:1095
#, c-format
-msgid "Enable \"%s\" to read the file"
+msgid ""
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
msgstr ""
-#: ../../standalone/draksplash:1
+#: printer/printerdrake.pm:1099
#, fuzzy, c-format
-msgid "choose image"
-msgstr "เลือกกิจกรรม"
-
-#: ../../network/shorewall.pm:1
-#, c-format
-msgid "Firewalling configuration detected!"
-msgstr "ตรวจพบคอนฟิกของ Firewall"
+msgid "You must choose/enter a printer/device!"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: printer/printerdrake.pm:1168
#, c-format
-msgid "Connection name"
-msgstr "ชื่อการเชื่อมต่อ"
+msgid "Remote lpd Printer Options"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
-#: ../../standalone/draksplash:1
-#, c-format
+#: printer/printerdrake.pm:1169
+#, fuzzy, c-format
msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
msgstr ""
+"หากคุณต้องการใช้คิวเครื่องพิมพ์แบบรีโมท คุณจะต้องป้อนข้อมูล\n"
+"ของชื่อโฮสต์ที่ให้บริการเครื่องพิมพ์นั้น และชื่อคิวของเซิร์ฟเวอร์นั้น\n"
+"ซึ่งเป็นที่ๆงานพิมพ์จะถูกเก็บไว้"
-#: ../../fsedit.pm:1
-#, c-format
-msgid ""
-"You may not be able to install lilo (since lilo doesn't handle a LV on "
-"multiple PVs)"
-msgstr ""
+#: printer/printerdrake.pm:1170
+#, fuzzy, c-format
+msgid "Remote host name"
+msgstr "ชื่อโฮสต์รีโมท"
-#: ../../install_steps_gtk.pm:1
+#: printer/printerdrake.pm:1171
#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+msgid "Remote printer name"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:1174
#, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "คุณต้องการเม้าท์ loopback file %s ไว้ที่ใด?"
+msgid "Remote host name missing!"
+msgstr "ชื่อโฮสต์รีโมท"
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
+#: printer/printerdrake.pm:1178
+#, fuzzy, c-format
+msgid "Remote printer name missing!"
+msgstr "ชื่อโฮสต์รีโมท"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Use CD-R/DVD-R to backup"
-msgstr ""
+#: printer/printerdrake.pm:1200 printer/printerdrake.pm:1714
+#: standalone/drakTermServ:442 standalone/drakTermServ:725
+#: standalone/drakTermServ:741 standalone/drakTermServ:1332
+#: standalone/drakTermServ:1340 standalone/drakTermServ:1351
+#: standalone/drakbackup:767 standalone/drakbackup:874
+#: standalone/drakbackup:908 standalone/drakbackup:1027
+#: standalone/drakbackup:1891 standalone/drakbackup:1895
+#: standalone/drakconnect:254 standalone/drakconnect:283
+#: standalone/drakconnect:512 standalone/drakconnect:516
+#: standalone/drakconnect:540 standalone/harddrake2:159
+#, fuzzy, c-format
+msgid "Information"
+msgstr "แสดงข้อมูล"
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:1200 printer/printerdrake.pm:1714
#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 buttons"
+msgid "Detected model: %s %s"
+msgstr "ค้นพบ %s"
+
+#: printer/printerdrake.pm:1276 printer/printerdrake.pm:1516
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "ทดสอบ connection..."
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: printer/printerdrake.pm:1287 printer/printerdrake.pm:1308
#, c-format
-msgid "Replay"
-msgstr "เรียกอีกครั้ง"
+msgid ", printer \"%s\" on server \"%s\""
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:1290 printer/printerdrake.pm:1311
#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
-#: ../../install_steps.pm:1
+#: printer/printerdrake.pm:1332
#, c-format
-msgid "No floppy drive available"
-msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบ SMB (เครื่องพิมพ์ในระบบวินโดวส์ 9x/NT)"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Backup files are corrupted"
+#: printer/printerdrake.pm:1333
+#, fuzzy, c-format
+msgid ""
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
msgstr ""
+"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ SMB ได้ คุณจะต้องใส่ข้อมูลของชื่อโฮสต์ที่\n"
+"เป็น SMB (โปรดสังเกตุว่า ชื่อโฮสต์แบบ SMB อาจแตกต่างจากชื่อโฮสต์\n"
+"แบบ TCP/IP) และข้อมูลค่า IP แอดเดรสของพรินต์เซิร์ฟเวอร์ รวมทั้ง\n"
+"ชื่อของเครื่องพิมพ์ที่ต้องการใช้ (share name) และชื่อของผู้ใช้ (username)\n"
+"รหัสผ่าน (password) และข้อมูลของเวิร์คกรุ๊ป (workgroup) ด้วย"
-#: ../../standalone/drakxtv:1
+#: printer/printerdrake.pm:1334
#, c-format
-msgid "TV norm:"
+msgid ""
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:1336
#, c-format
-msgid "Cpuid family"
-msgstr ""
+msgid "SMB server host"
+msgstr "ชื่อโฮสต์ของ SMB server"
-#: ../../Xconfig/card.pm:1
+#: printer/printerdrake.pm:1337
#, c-format
-msgid "32 MB"
-msgstr "32 MB"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: thin"
-msgstr "ประเภท: "
+msgid "SMB server IP"
+msgstr "ค่า IP ของ SMB เซิร์ฟเวอร์"
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:1338
#, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuanian AZERTY (new)"
+msgid "Share name"
+msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:1341
#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+msgid "Workgroup"
+msgstr "เวิร์กกรุ๊ป (workgroup)"
-#: ../../fsedit.pm:1
+#: printer/printerdrake.pm:1343
#, fuzzy, c-format
-msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
-msgstr ""
-"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
-"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
-"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"
+msgid "Auto-detected"
+msgstr "ใช้ auto detection"
-#: ../../any.pm:1
+#: printer/printerdrake.pm:1353
#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "ระบบปฏิบัติการอื่นๆ (Mac OS...)"
+msgid "Either the server name or the server's IP must be given!"
+msgstr ""
-#: ../../mouse.pm:1
+#: printer/printerdrake.pm:1357
#, c-format
-msgid "To activate the mouse,"
-msgstr "เพื่อให้เม้าส์ทำงาน"
+msgid "Samba share name missing!"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: printer/printerdrake.pm:1363
#, c-format
-msgid "Bringing up the network"
-msgstr "ระบบเน็ตเวิร์กกำลังจะทำงาน"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
+msgid "SECURITY WARNING!"
+msgstr ""
-#: ../../help.pm:1
+#: printer/printerdrake.pm:1364
#, c-format
msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose which one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:1374
#, c-format
-msgid "Tanzania"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "คำนวณขอบเขตของระบบไฟล์"
-
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:1377
#, c-format
msgid ""
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
"\n"
-"Backup Sources: \n"
+"Do you really want to continue setting up this printer as you are doing now?"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:1449
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์ในระบบเน็ตแวร์"
+
+#: printer/printerdrake.pm:1450
#, fuzzy, c-format
-msgid "custom"
-msgstr "แบบปรับแก้ได้ (Customized) "
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
+msgstr ""
+"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ในระบบเน็ตแวร์ คุณจะต้องป้อนข้อมูล\n"
+"ของชื่อพรินต์เซิร์ฟเวอร์ในระบบเน็ตแวร์ (ชื่อที่ป้อนเข้าไปอาจไม่ใช่ชื่อของ\n"
+"โฮสต์แบบ TCP/IP) และข้อมูลชื่อคิวของเครื่องพิมพ์ที่ต้องการใช้\n"
+"รวมทั้งชื่อผู้ใช้และรหัสผ่านด้วย"
-#: ../../standalone/logdrake:1
+#: printer/printerdrake.pm:1451
#, c-format
-msgid "Content of the file"
-msgstr "ข้อความของ file"
+msgid "Printer Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+#: printer/printerdrake.pm:1452
+#, c-format
+msgid "Print Queue Name"
+msgstr "ชื่อพรินต์คิว"
-#: ../../install_steps_gtk.pm:1
+#: printer/printerdrake.pm:1457
#, c-format
-msgid "in order to keep %s"
+msgid "NCP server name missing!"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: printer/printerdrake.pm:1461
#, c-format
-msgid "Let me pick any driver"
+msgid "NCP queue name missing!"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: printer/printerdrake.pm:1527 printer/printerdrake.pm:1547
#, c-format
-msgid "transmitted"
+msgid ", host \"%s\", port %s"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
-
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:1530 printer/printerdrake.pm:1550
#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
+msgid "Host \"%s\", port %s"
+msgstr ""
+
+#: printer/printerdrake.pm:1571
+#, fuzzy, c-format
+msgid "TCP/Socket Printer Options"
+msgstr "อ็อปชั่นของเครื่องพิมพ์โลคอล"
-#: ../../modules/parameters.pm:1
+#: printer/printerdrake.pm:1573
#, c-format
-msgid "%d comma separated strings"
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
msgstr ""
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid " isdn"
+#: printer/printerdrake.pm:1574
+#, fuzzy, c-format
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
msgstr ""
+"To print to a socket printer, you need to provide the\n"
+"hostname of the printer and optionally the port number."
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
+#: printer/printerdrake.pm:1578
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "ชื่อของเครื่องพิมพ์"
-#: ../../standalone/draksplash:1
+#: printer/printerdrake.pm:1601
#, fuzzy, c-format
-msgid "Theme name"
-msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+msgid "Printer host name or IP"
+msgstr "ชื่อของเครื่องพิมพ์"
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/printerdrake:1
+#: printer/printerdrake.pm:1649 printer/printerdrake.pm:1651
#, c-format
-msgid "/_Help"
-msgstr "/_ช่วยเหลือ"
+msgid "Printer Device URI"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
-#: ../../harddrake/sound.pm:1
+#: printer/printerdrake.pm:1650
#, c-format
-msgid "Choosing an arbitrary driver"
+msgid ""
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:1668
#, c-format
-msgid "Cook Islands"
+msgid "A valid URI must be entered!"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: printer/printerdrake.pm:1749
#, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+msgid "Pipe into command"
msgstr ""
-#: ../../standalone/draksplash:1
+#: printer/printerdrake.pm:1750
#, c-format
-msgid "the width of the progress bar"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
msgstr ""
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "ฟอร์แมตพาร์ติชั่น %s"
-
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:1751
#, fuzzy, c-format
-msgid "Hostname required"
-msgstr "ชื่อโฮสต์:"
+msgid "Command line"
+msgstr "ชื่อโดเมน"
-#: ../../standalone/drakfont:1
+#: printer/printerdrake.pm:1755
#, c-format
-msgid "Unselect fonts installed"
+msgid "A command line must be entered!"
msgstr ""
-#: ../../mouse.pm:1
+#: printer/printerdrake.pm:1788
#, c-format
-msgid "Wheel"
-msgstr "Wheel"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
+"an HP PhotoSmart or an HP LaserJet 2200?"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: printer/printerdrake.pm:1801
#, fuzzy, c-format
-msgid "Submit kernel version"
-msgstr "kernel version"
+msgid "Installing HPOJ package..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
-#: ../../standalone/drakperm:1 ../../standalone/draksec:1
-#: ../../standalone/logdrake:1 ../../standalone/mousedrake:1
-#: ../../standalone/net_monitor:1
+#: printer/printerdrake.pm:1809 printer/printerdrake.pm:1893
#, c-format
-msgid "Cancel"
-msgstr "ยกเลิก"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: printer/printerdrake.pm:1831
#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Installing SANE packages..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-#: ../../harddrake/data.pm:1
+#: printer/printerdrake.pm:1858
#, fuzzy, c-format
-msgid "Videocard"
-msgstr "โหมดของการแสดงผล"
+msgid "Installing mtools packages..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:1873
#, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid "Scanning on your HP multi-function device"
msgstr ""
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "ลบคิว"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "ใช้ auto detection"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove printer"
-msgstr "เครื่องพิมพ์แบบรีโมท"
-
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:1881
#, c-format
-msgid "View Last Log"
+msgid "Photo memory card access on your HP multi-function device"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: printer/printerdrake.pm:1930
#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+msgid "Making printer port available for CUPS..."
msgstr ""
-#: ../../standalone/printerdrake:1
+#: printer/printerdrake.pm:1939 printer/printerdrake.pm:2183
+#: printer/printerdrake.pm:2327
#, fuzzy, c-format
-msgid "Connection Type"
-msgstr "ชนิดการเชื่อมต่อ"
+msgid "Reading printer database..."
+msgstr "อ่าน CUPS drivers database..."
-#: ../../standalone/logdrake:1
+#: printer/printerdrake.pm:2149
#, c-format
-msgid ""
-"Welcome to the mail configuration utility.\n"
-"\n"
-"Here, you'll be able to set up the alert system.\n"
+msgid "Enter Printer Name and Comments"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakperm:1
+#: printer/printerdrake.pm:2153 printer/printerdrake.pm:3241
#, c-format
-msgid "Other"
-msgstr "อื่นๆ"
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr ""
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1
+#: printer/printerdrake.pm:2159 printer/printerdrake.pm:3246
#, c-format
-msgid "Default"
-msgstr "Default"
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: printer/printerdrake.pm:2168
#, c-format
-msgid "Button 2 Emulation"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Please enter a package name."
-msgstr "โปรดป้อนชื่อผู้ใช้"
+#: printer/printerdrake.pm:2169
+#, c-format
+msgid "Name of printer"
+msgstr "ชื่อเครื่องพิมพ์"
-#: ../../security/l10n.pm:1
+#: printer/printerdrake.pm:2170 standalone/drakconnect:521
+#: standalone/harddrake2:40 standalone/printerdrake:212
+#: standalone/printerdrake:219
#, c-format
-msgid "Run chkrootkit checks"
-msgstr ""
+msgid "Description"
+msgstr "รายละเอียด"
-#: ../../standalone/drakfont:1
+#: printer/printerdrake.pm:2171 standalone/printerdrake:212
+#: standalone/printerdrake:219
#, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "Location"
+msgstr "ตำแหน่ง"
-#: ../../standalone/drakfont:1
+#: printer/printerdrake.pm:2188
#, fuzzy, c-format
-msgid "Abiword"
-msgstr "เลิก"
+msgid "Preparing printer database..."
+msgstr "อ่าน CUPS drivers database..."
-#: ../../standalone/draksplash:1
+#: printer/printerdrake.pm:2306
#, fuzzy, c-format
-msgid "choose image file"
-msgstr "เลือกกิจกรรม"
+msgid "Your printer model"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../Xconfig/card.pm:1
+#: printer/printerdrake.pm:2307
#, c-format
-msgid "X server"
-msgstr "X เซิร์ฟเวอร์"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
+msgstr ""
-#: ../../any.pm:1
+#: printer/printerdrake.pm:2312 printer/printerdrake.pm:2315
#, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "ชื่อโดเมน"
+msgid "The model is correct"
+msgstr "ถูกต้องหรือไม่?"
-#: ../../standalone/drakxtv:1
+#: printer/printerdrake.pm:2313 printer/printerdrake.pm:2314
+#: printer/printerdrake.pm:2317
#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"
+msgid "Select model manually"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:2340
#, c-format
-msgid "US keyboard (international)"
-msgstr "คีย์บอร์ดอเมริกัน (นานาชาติ)"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "ออกจากการติดตั้ง"
+#: printer/printerdrake.pm:2359
+#, c-format
+msgid "Install a manufacturer-supplied PPD file"
+msgstr ""
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:2390
#, c-format
-msgid "Both Alt keys simultaneously"
+msgid ""
+"Every PostScript printer is delivered with a PPD file which describes the "
+"printer's options and features."
msgstr ""
-#: ../../network/netconnect.pm:1
+#: printer/printerdrake.pm:2391
#, c-format
-msgid "LAN connection"
-msgstr "LAN connection"
+msgid ""
+"This file is usually somewhere on the CD with the Windows and Mac drivers "
+"delivered with the printer."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: printer/printerdrake.pm:2392
#, c-format
-msgid "/File/-"
-msgstr "/ไฟล์/-"
+msgid "You can find the PPD files also on the manufacturer's web sites."
+msgstr ""
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:2393
#, c-format
-msgid "Italian"
-msgstr "อิตาลี"
+msgid ""
+"If you have Windows installed on your machine, you can find the PPD file on "
+"your Windows partition, too."
+msgstr ""
-#: ../../interactive.pm:1
+#: printer/printerdrake.pm:2394
#, c-format
-msgid "Basic"
+msgid ""
+"Installing the printer's PPD file and using it when setting up the printer "
+"makes all options of the printer available which are provided by the "
+"printer's hardware"
msgstr ""
-#: ../../install_messages.pm:1
+#: printer/printerdrake.pm:2395
#, c-format
-msgid "http://www.mandrakelinux.com/en/92errata.php3"
+msgid ""
+"Here you can choose the PPD file to be installed on your machine, it will "
+"then be used for the setup of your printer."
msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:2397
+#, fuzzy, c-format
+msgid "Install PPD file from"
+msgstr "ติดตั้ง"
+
+#: printer/printerdrake.pm:2399 printer/printerdrake.pm:2406
+#: standalone/scannerdrake:174 standalone/scannerdrake:182
+#: standalone/scannerdrake:233 standalone/scannerdrake:240
#, c-format
-msgid "Honduras"
+msgid "CD-ROM"
msgstr ""
-#: ../../help.pm:1
+#: printer/printerdrake.pm:2400 printer/printerdrake.pm:2408
+#: standalone/scannerdrake:175 standalone/scannerdrake:184
+#: standalone/scannerdrake:234 standalone/scannerdrake:242
+#, fuzzy, c-format
+msgid "Floppy Disk"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
+
+#: printer/printerdrake.pm:2401 printer/printerdrake.pm:2410
+#: standalone/scannerdrake:176 standalone/scannerdrake:186
+#: standalone/scannerdrake:235 standalone/scannerdrake:244
+#, fuzzy, c-format
+msgid "Other place"
+msgstr "กำลังตรวจสอบพอร์ต"
+
+#: printer/printerdrake.pm:2416
+#, fuzzy, c-format
+msgid "Select PPD file"
+msgstr "เลือกไฟล์"
+
+#: printer/printerdrake.pm:2420
#, c-format
-msgid "pdq"
+msgid "The PPD file %s does not exist or is unreadable!"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: printer/printerdrake.pm:2426
#, c-format
-msgid "Card IO"
-msgstr "Card IO"
+msgid "The PPD file %s does not conform with the PPD specifications!"
+msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: printer/printerdrake.pm:2437
#, fuzzy, c-format
-msgid "Samba server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "Installing PPD file..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:2539
+#, fuzzy, c-format
+msgid "OKI winprinter configuration"
+msgstr "การคอนฟิก Internet"
+
+#: printer/printerdrake.pm:2540
#, c-format
msgid ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
msgstr ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-#: ../../standalone/drakautoinst:1
+#: printer/printerdrake.pm:2564 printer/printerdrake.pm:2593
+#, fuzzy, c-format
+msgid "Lexmark inkjet configuration"
+msgstr "การคอนฟิก Internet"
+
+#: printer/printerdrake.pm:2565
#, c-format
msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: printer/printerdrake.pm:2594
#, c-format
msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:2597
#, c-format
-msgid "\t-Network by FTP.\n"
+msgid "Firmware-Upload for HP LaserJet 1000"
msgstr ""
-#: ../../security/l10n.pm:1
+#: printer/printerdrake.pm:2710
#, c-format
-msgid "Reports check result to tty"
+msgid ""
+"Printer default settings\n"
+"\n"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:2835
#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
-
-#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "ออก"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "ขนาดหน่วยความจำของกราฟฟิคการ์ด: %s kB\n"
+msgid "Printer default settings"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
-#: ../../standalone.pm:1
+#: printer/printerdrake.pm:2842
#, c-format
-msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
-"\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-"GNU General Public License for more details.\n"
-"\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgid "Option %s must be an integer number!"
msgstr ""
-#: ../../any.pm:1
+#: printer/printerdrake.pm:2846
#, c-format
-msgid "access to compilation tools"
+msgid "Option %s must be a number!"
msgstr ""
-#: ../../standalone/net_monitor:1
+#: printer/printerdrake.pm:2850
#, c-format
-msgid "Global statistics"
+msgid "Option %s out of range!"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:2901
#, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
+
+#: printer/printerdrake.pm:2916
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "กำลังตรวจสอบพอร์ต"
-#: ../../diskdrake/hd_gtk.pm:1
+#: printer/printerdrake.pm:2917
#, c-format
msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
msgstr ""
-"ถ้าคุณต้องการใช้ aboot ควรระวังว่าต้องมีที่ว่าง (2048 sectors) \n"
-"ด้านหน้าของ disk"
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:2921
#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "เครื่องมีอ Standard"
+msgid "No test pages"
+msgstr "ใช้ ให้พิมพ์กระดาษทดสอบทั้งสองแบบ"
-#: ../../standalone/drakclock:1
+#: printer/printerdrake.pm:2922
#, fuzzy, c-format
-msgid "Time Zone"
-msgstr "โซนเวลา"
+msgid "Print"
+msgstr "เครื่องพิมพ์"
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Create"
-msgstr "สร้าง"
+#: printer/printerdrake.pm:2947
+#, fuzzy, c-format
+msgid "Standard test page"
+msgstr "เครื่องมีอ Standard"
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:2950
#, c-format
-msgid "What"
+msgid "Alternative test page (Letter)"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: printer/printerdrake.pm:2953
+#, fuzzy, c-format
+msgid "Alternative test page (A4)"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
+
+#: printer/printerdrake.pm:2955
+#, fuzzy, c-format
+msgid "Photo test page"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
+
+#: printer/printerdrake.pm:2959
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
+
+#: printer/printerdrake.pm:2967 printer/printerdrake.pm:3123
#, c-format
-msgid "There was an error ordering packages:"
-msgstr "มีปัญหาการลำดับของแพ็คเก็จ:"
+msgid "Printing test page(s)..."
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:2992
#, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "บัลกาเรีย"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
+"กรุณารอสักครู่\n"
+"สถานะการพิมพ์:\n"
+"%s\n"
+"\n"
+"มันทำงานถูกต้องใหมครับ"
-#: ../../standalone/drakTermServ:1
+#: printer/printerdrake.pm:2996
#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+msgstr ""
+"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
+"กรุณารอสักครู่\n"
+"มันทำงานถูกต้องใหมครับ"
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:3003
+#, c-format
+msgid "Did it work properly?"
+msgstr ""
+
+#: printer/printerdrake.pm:3024 printer/printerdrake.pm:4192
#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "ประเภทของระบบไฟล์: "
+msgid "Raw printer"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:3054
#, c-format
-msgid "Gujarati"
+msgid ""
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: printer/printerdrake.pm:3056
#, c-format
msgid ""
-" While you can use a pool of IP addresses, rather than setup a "
-"specific entry for\n"
-" a client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-" of client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-" Note: The '#type' entry is only used by drakTermServ. Clients can "
-"either be 'thin'\n"
-" or 'fat'. Thin clients run most software on the server via xdmcp, "
-"while fat clients run \n"
-" most software on the client machine. A special inittab, %s is\n"
-" written for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-" modified if thin clients are used, to enable xdmcp. Since there are "
-"security issues in \n"
-" using xdmcp, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-" subnet.\n"
-"\t\t\t\n"
-" Note: The '#hdw_config' entry is also only used by drakTermServ. "
-"Clients can either \n"
-" be 'true' or 'false'. 'true' enables root login at the client "
-"machine and allows local \n"
-" hardware configuration of sound, mouse, and X, using the 'drak' "
-"tools. This is enabled \n"
-" by creating separate config files associated with the client's IP "
-"address and creating \n"
-" read/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-" with the configuration, you can remove root login privileges from "
-"the client.\n"
-"\t\t\t\n"
-" Note: You must stop/start the server after adding or changing "
-"clients."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: printer/printerdrake.pm:3059 printer/printerdrake.pm:3076
+#: printer/printerdrake.pm:3086
#, c-format
msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
+"\n"
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: printer/printerdrake.pm:3062 printer/printerdrake.pm:3102
#, c-format
msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict@mandrakesoft.com\n"
+msgstr ""
+
+#: printer/printerdrake.pm:3066
+#, c-format
+msgid ""
+"Here is a list of the available printing options for the current printer:\n"
"\n"
msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Save theme"
-msgstr "ติดตั้งระบบ"
+#: printer/printerdrake.pm:3071 printer/printerdrake.pm:3081
+#, c-format
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
+msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:3073 printer/printerdrake.pm:3083
+#: printer/printerdrake.pm:3093
#, c-format
-msgid "Brazil"
-msgstr "บราซิล"
+msgid ""
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
+msgstr ""
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install"
-msgstr "ติดตั้ง"
+#: printer/printerdrake.pm:3078 printer/printerdrake.pm:3088
+#, c-format
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
+msgstr ""
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: printer/printerdrake.pm:3091
#, c-format
-msgid "Network Configuration Wizard"
-msgstr "Network Configuration Wizard"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
-#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:3095
#, c-format
-msgid "Removable media automounting"
+msgid ""
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
+msgstr ""
+
+#: printer/printerdrake.pm:3099
+#, c-format
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
msgstr ""
-#: ../../services.pm:1
+#: printer/printerdrake.pm:3109
#, fuzzy, c-format
-msgid "Printing"
-msgstr "เครื่องพิมพ์"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:3110
#, fuzzy, c-format
-msgid "Enter the directory to save:"
-msgstr "กรุณาทดสอบเม้าส์"
+msgid "Printing/Scanning on \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+
+#: printer/printerdrake.pm:3112
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:3113
+#, fuzzy, c-format
+msgid "Printing on the printer \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+
+#: printer/printerdrake.pm:3116 printer/printerdrake.pm:3119
+#: printer/printerdrake.pm:3120 printer/printerdrake.pm:3121
+#: printer/printerdrake.pm:4179 standalone/drakTermServ:321
+#: standalone/drakbackup:4583 standalone/drakbug:177 standalone/drakfont:497
+#: standalone/drakfont:588 standalone/net_monitor:106
+#: standalone/printerdrake:508
+#, fuzzy, c-format
+msgid "Close"
+msgstr "Mouse"
+
+#: printer/printerdrake.pm:3119
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์"
+
+#: printer/printerdrake.pm:3140
#, c-format
msgid ""
-"There are no printers found which are directly connected to your machine"
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:3163
#, c-format
-msgid "Create a new partition"
-msgstr "สร้างพาร์ติชั่นใหม่"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: printer/printerdrake.pm:3185 printer/printerdrake.pm:3575
#, fuzzy, c-format
-msgid "Driver:"
-msgstr "Driver"
+msgid "Reading printer data..."
+msgstr "อ่าน CUPS drivers database..."
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:3205 printer/printerdrake.pm:3232
+#: printer/printerdrake.pm:3267
+#, fuzzy, c-format
+msgid "Transfer printer configuration"
+msgstr "การคอนฟิก Internet"
+
+#: printer/printerdrake.pm:3206
#, c-format
-msgid "unknown"
+msgid ""
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
msgstr ""
-#: ../../install_interactive.pm:1
+#: printer/printerdrake.pm:3209
#, c-format
-msgid "Use fdisk"
-msgstr "ใช้ fdisk"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
-#: ../../mouse.pm:1
+#: printer/printerdrake.pm:3211
#, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "เลื่อนล้อของคุณ"
+msgid ""
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: printer/printerdrake.pm:3213
#, c-format
-msgid "sent: "
+msgid "LPD and LPRng do not support IPP printers.\n"
msgstr ""
-#: ../../network/network.pm:1
+#: printer/printerdrake.pm:3215
#, c-format
-msgid "Automatic IP"
-msgstr "กำหนดค่า IP แบบอัตโนมัติ"
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
-#: ../../help.pm:1
+#: printer/printerdrake.pm:3216
#, c-format
msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
-"should see after your computer has finished doing its hardware tests is the\n"
-"bootloader menu, giving you the choice of which operating system to start.\n"
-"\n"
-"The \"%s\" button shows two more buttons to:\n"
-"\n"
-" * \"%s\": to create an installation floppy disk that will automatically\n"
-"perform a whole installation without the help of an operator, similar to\n"
-"the installation you just configured.\n"
-"\n"
-" Note that two different options are available after clicking the button:\n"
"\n"
-" * \"%s\". This is a partially automated installation. The partitioning\n"
-"step is the only interactive procedure.\n"
-"\n"
-" * \"%s\". Fully automated installation: the hard disk is completely\n"
-"rewritten, all data is lost.\n"
-"\n"
-" This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
-"To use this selection with another installation, insert the floppy and\n"
-"start the installation. At the prompt, press the [F1] key and type >>linux\n"
-"defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:3217
#, c-format
-msgid "Moldova"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
msgstr ""
-#: ../../mouse.pm:1
+#: printer/printerdrake.pm:3220
#, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "Do not transfer printers"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "การคอนฟิก"
+#: printer/printerdrake.pm:3221 printer/printerdrake.pm:3237
+#, c-format
+msgid "Transfer"
+msgstr ""
-#: ../advertising/13-mdkexpert_corporate.pl:1
+#: printer/printerdrake.pm:3233
#, c-format
-msgid "An online platform to respond to enterprise support needs."
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
msgstr ""
-#: ../../network/network.pm:1
+#: printer/printerdrake.pm:3254
#, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "ค่าของ Proxy ควรจะเป็น http://..."
+msgid "New printer name"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:3257
#, c-format
-msgid "Oriya"
+msgid "Transferring %s..."
+msgstr ""
+
+#: printer/printerdrake.pm:3268
+#, c-format
+msgid ""
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
msgstr ""
-#: ../../standalone/drakperm:1
+#: printer/printerdrake.pm:3278
#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Refreshing printer data..."
+msgstr "อ่าน CUPS drivers database..."
+
+#: printer/printerdrake.pm:3287
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "ทดสอบ connection..."
+
+#: printer/printerdrake.pm:3328 printer/printerdrake.pm:3332
+#: printer/printerdrake.pm:3334
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
-#: ../../standalone/drakboot:1
+#: printer/printerdrake.pm:3329
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "ไม่มีการคอนฟิกจอภาพ"
+
+#: printer/printerdrake.pm:3330
#, c-format
-msgid "LiLo and Bootsplash themes installation successful"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:3333
+#, fuzzy, c-format
+msgid "Go on without configuring the network"
+msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"
+
+#: printer/printerdrake.pm:3367
#, c-format
msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the %s Control Center, section "
+"\"Network & Internet\"/\"Connection\", and afterwards set up the printer, "
+"also using the %s Control Center, section \"Hardware\"/\"Printer\""
msgstr ""
-#: ../../modules/interactive.pm:1
+#: printer/printerdrake.pm:3368
#, c-format
msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
msgstr ""
-"คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว\n"
-"อ๊อปชั่นจะอยู่ในรูปแบบ ``name=value name2=value2 ...''\n"
-"ตัวอย่างเช่น, ``io=0x300 irq=7''"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Quit without writing the partition table?"
-msgstr "ออกโดยไม่ต้องเขียนตารางพาร์ติชั่น"
+#: printer/printerdrake.pm:3378
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
+
+#: printer/printerdrake.pm:3417
+#, fuzzy, c-format
+msgid "high"
+msgstr "สูง"
-#: ../../mouse.pm:1
+#: printer/printerdrake.pm:3417
+#, fuzzy, c-format
+msgid "paranoid"
+msgstr "Paranoid"
+
+#: printer/printerdrake.pm:3418
#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:3419
#, c-format
-msgid "On Hard Drive"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
msgstr ""
-#: ../../standalone.pm:1
+#: printer/printerdrake.pm:3453
#, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+msgid "Starting the printing system at boot time"
+msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
-#: ../../keyboard.pm:1
+#: printer/printerdrake.pm:3454
#, c-format
-msgid "Dutch"
-msgstr "ฮอลแลนด์"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:3475 printer/printerdrake.pm:3690
#, c-format
-msgid "Angola"
+msgid "Checking installed software..."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:3481
#, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
+msgid "Removing %s ..."
+msgstr "ความละเอียดของภาพ %s\n"
-#: ../../standalone/logdrake:1
+#: printer/printerdrake.pm:3488
#, fuzzy, c-format
-msgid "service setting"
-msgstr "อุปกรณ์"
+msgid "Installing %s ..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "แบบปรับแก้ได้ (Customized) "
+#: printer/printerdrake.pm:3535
+#, fuzzy, c-format
+msgid "Setting Default Printer..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:3555
#, fuzzy, c-format
-msgid "Latvia"
-msgstr "ตำแหน่ง"
+msgid "Select Printer Spooler"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
-#: ../../diskdrake/interactive.pm:1
+#: printer/printerdrake.pm:3556
#, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "File already used by another loopback, choose another one"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Read-only"
+#: printer/printerdrake.pm:3607
+#, fuzzy, c-format
+msgid "Failed to configure printer \"%s\"!"
+msgstr "การคอนฟิกเครื่องพิมพ์"
+
+#: printer/printerdrake.pm:3620
+#, fuzzy, c-format
+msgid "Installing Foomatic..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+
+#: printer/printerdrake.pm:3806
+#, fuzzy, c-format
+msgid ""
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it. "
msgstr ""
+"ต่อไปนี้เป็นข้อมูลรอการพิมพ์\n"
+"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
-#: ../../security/help.pm:1
+#: printer/printerdrake.pm:3834
#, c-format
-msgid ""
-"Enable/Disable name resolution spoofing protection. If\n"
-"\"alert\" is true, also reports to syslog."
+msgid "Display all available remote CUPS printers"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: printer/printerdrake.pm:3835
#, c-format
-msgid "No known driver"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: printer/printerdrake.pm:3845
+#, fuzzy, c-format
+msgid "CUPS configuration"
+msgstr "การปรับแต่ง LAN"
+
+#: printer/printerdrake.pm:3857
+#, fuzzy, c-format
+msgid "Change the printing system"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+
+#: printer/printerdrake.pm:3866
#, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Normal Mode"
+msgstr "โหมดธรรมดา"
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:3867
#, c-format
-msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
-msgstr ""
+msgid "Expert Mode"
+msgstr "โหมดผู้เชี่ยวชาญ"
-#: ../../standalone/draksound:1
+#: printer/printerdrake.pm:4138 printer/printerdrake.pm:4193
+#: printer/printerdrake.pm:4274 printer/printerdrake.pm:4284
#, c-format
+msgid "Printer options"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์"
+
+#: printer/printerdrake.pm:4174
+#, fuzzy, c-format
+msgid "Modify printer configuration"
+msgstr "การคอนฟิก Internet"
+
+#: printer/printerdrake.pm:4176
+#, fuzzy, c-format
msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
-#: ../../standalone/drakconnect:1
+#: printer/printerdrake.pm:4180
#, c-format
-msgid "Configure Local Area Network..."
-msgstr "ปรับแต่งระบบเน็ตเวิร์กภายใน..."
+msgid "Do it!"
+msgstr ""
+
+#: printer/printerdrake.pm:4185 printer/printerdrake.pm:4243
+#, fuzzy, c-format
+msgid "Printer connection type"
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+
+#: printer/printerdrake.pm:4186 printer/printerdrake.pm:4247
+#, fuzzy, c-format
+msgid "Printer name, description, location"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
-#: ../../../move/move.pm:1
+#: printer/printerdrake.pm:4188 printer/printerdrake.pm:4266
#, c-format
-msgid ""
-"The USB key seems to have write protection enabled. Please\n"
-"unplug it, remove write protection, and then plug it again."
+msgid "Printer manufacturer, model, driver"
msgstr ""
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Launch the sound system on your machine"
-msgstr "รัน X-Window เมื่อเริ่มทำงาน"
+#: printer/printerdrake.pm:4189 printer/printerdrake.pm:4267
+#, c-format
+msgid "Printer manufacturer, model"
+msgstr ""
-#: ../../security/l10n.pm:1
+#: printer/printerdrake.pm:4195 printer/printerdrake.pm:4278
#, c-format
-msgid "Verify checksum of the suid/sgid files"
+msgid "Set this printer as the default"
msgstr ""
-#: ../../security/l10n.pm:1
+#: printer/printerdrake.pm:4197 printer/printerdrake.pm:4285
#, c-format
-msgid "Run some checks against the rpm database"
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../standalone/drakperm:1
+#: printer/printerdrake.pm:4198 printer/printerdrake.pm:4290
#, c-format
-msgid "Execute"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:4199 printer/printerdrake.pm:4295
#, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "อ่าน CUPS drivers database..."
+msgid "Print test pages"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
-#: ../../standalone/harddrake2:1
+#: printer/printerdrake.pm:4200 printer/printerdrake.pm:4297
#, fuzzy, c-format
-msgid "Information"
-msgstr "แสดงข้อมูล"
+msgid "Learn how to use this printer"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
-#: ../../network/drakfirewall.pm:1
+#: printer/printerdrake.pm:4201 printer/printerdrake.pm:4299
#, fuzzy, c-format
-msgid "No network card"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+msgid "Remove printer"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../mouse.pm:1
-#, c-format
-msgid "3 buttons"
-msgstr "3 buttons"
+#: printer/printerdrake.pm:4255
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "อ่าน CUPS drivers database..."
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: printer/printerdrake.pm:4286
#, c-format
-msgid "Which filesystem do you want?"
-msgstr "คุณต้องการเลือก filesystem ใด"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:4288
#, c-format
-msgid "Malta"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Detailed information"
-msgstr "แสดงข้อมูล"
-
-#: ../../printer/printerdrake.pm:1
+#: printer/printerdrake.pm:4289
#, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../install_any.pm:1
+#: printer/printerdrake.pm:4291
#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "่แผ่นฟล้อปปี้นี้ ไม่ใช่ แบบFAT"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: printer/printerdrake.pm:4293
#, c-format
-msgid "Configuring network"
-msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"
+msgid ""
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: printer/printerdrake.pm:4294
#, c-format
msgid ""
-"This option will save files that have changed. Exact behavior depends on "
-"whether incremental or differential mode is used."
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
msgstr ""
-#: ../../Xconfig/main.pm:1
+#: printer/printerdrake.pm:4338
#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "กราฟฟิคการ์ด"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Resizing Windows partition"
-msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"
+#: printer/printerdrake.pm:4342
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "อ่าน CUPS drivers database..."
+
+#: printer/printerdrake.pm:4366
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../lang.pm:1
+#: printer/printerdrake.pm:4367
#, c-format
-msgid "Cameroon"
+msgid "The printer \"%s\" is set as the default printer now."
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: raid.pm:37
#, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "ผู้ให้บริการ dns 1 (optional)"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "ไม่สามารถเพิ่มพาร์ติชั่นเป็น _formatted_ RAID md%d"
-#: ../../install_interactive.pm:1
+#: raid.pm:139
#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
-msgstr ""
-"คุณสามารถพาร์ติชั่น %s เดี๋ยวนี้\n"
-"เมื่อเสร็จแล้วอย่าลืมบันทึกโดยใช้ `w'"
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid failed (maybe raidtools are missing?)"
-#: ../../keyboard.pm:1
+#: raid.pm:139
#, c-format
-msgid "Saami (swedish/finnish)"
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Close"
-msgstr "Mouse"
+msgid "mkraid failed"
+msgstr "mkraid failed"
-#: ../../help.pm:1
+#: raid.pm:155
#, c-format
-msgid ""
-"\"%s\": check the current country selection. If you are not in this\n"
-"country, click on the \"%s\" button and choose another one. If your country\n"
-"is not in the first list shown, click the \"%s\" button to get the complete\n"
-"country list."
-msgstr ""
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "ไม่มีพาร์ติชั่นพอสำหรับ RAID ระดับ %d\n"
-#: ../../standalone/logdrake:1
+#: scanner.pm:96
#, c-format
-msgid "Calendar"
-msgstr "ปฎิทิน"
+msgid "Could not create directory /usr/share/sane/firmware!"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: scanner.pm:102
#, c-format
-msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+msgid "Could not copy firmware file %s to /usr/share/sane/firmware!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+#: scanner.pm:109
+#, c-format
+msgid "Could not set permissions of firmware file %s!"
msgstr ""
-"หากคุณต้องการใช้คิวเครื่องพิมพ์แบบรีโมท คุณจะต้องป้อนข้อมูล\n"
-"ของชื่อโฮสต์ที่ให้บริการเครื่องพิมพ์นั้น และชื่อคิวของเซิร์ฟเวอร์นั้น\n"
-"ซึ่งเป็นที่ๆงานพิมพ์จะถูกเก็บไว้"
-#: ../../lang.pm:1
+#: scanner.pm:188 standalone/scannerdrake:59 standalone/scannerdrake:63
+#: standalone/scannerdrake:71 standalone/scannerdrake:333
+#: standalone/scannerdrake:407 standalone/scannerdrake:451
+#: standalone/scannerdrake:455 standalone/scannerdrake:477
+#: standalone/scannerdrake:542
#, fuzzy, c-format
-msgid "Iceland"
-msgstr "ไอซ์แลนด์"
+msgid "Scannerdrake"
+msgstr "เลือกกราฟฟิคการ์ด"
-#: ../../standalone/drakconnect:1
-#, fuzzy, c-format
-msgid "Network & Internet Configuration"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+#: scanner.pm:189 standalone/scannerdrake:903
+#, c-format
+msgid "Could not install the packages needed to share your scanner(s)."
+msgstr ""
-#: ../../common.pm:1
+#: scanner.pm:190
#, c-format
-msgid "consolehelper missing"
+msgid "Your scanner(s) will not be available for non-root users."
msgstr ""
-#: ../../services.pm:1
+#: security/help.pm:11
#, c-format
-msgid "stopped"
-msgstr "หยุด"
+msgid "Accept/Refuse bogus IPv4 error messages."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: security/help.pm:13
#, c-format
-msgid "Whether the FPU has an irq vector"
+msgid " Accept/Refuse broadcasted icmp echo."
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: security/help.pm:15
#, c-format
-msgid "Ext2"
-msgstr "Ext2"
+msgid " Accept/Refuse icmp echo."
+msgstr ""
-#: ../../ugtk2.pm:1
+#: security/help.pm:17
#, c-format
-msgid "Expand Tree"
-msgstr "ขยาย tree"
+msgid "Allow/Forbid autologin."
+msgstr ""
-#: ../../harddrake/sound.pm:1
+#: security/help.pm:19
#, c-format
msgid ""
-"The old \"%s\" driver is blacklisted.\n"
+"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
"\n"
-"It has been reported to oops the kernel on unloading.\n"
+"If set to NONE, no issues are allowed.\n"
"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Else only /etc/issue is allowed."
msgstr ""
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Expert Mode"
-msgstr "โหมดผู้เชี่ยวชาญ"
-
-#: ../../printer/printerdrake.pm:1
+#: security/help.pm:25
#, c-format
-msgid "Printer options"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์"
+msgid "Allow/Forbid reboot by the console user."
+msgstr ""
-#: ../../standalone/drakgw:1
+#: security/help.pm:27
#, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+msgid "Allow/Forbid remote root login."
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../standalone/drakbackup:1
+#: security/help.pm:29
#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Allow/Forbid direct root login."
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid "Set the user umask."
-msgstr "ชื่อผู้ใช้"
+#: security/help.pm:31
+#, c-format
+msgid ""
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: security/help.pm:33
#, c-format
msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
+"Allow/Forbid X connections:\n"
"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
+"- ALL (all connections are allowed),\n"
"\n"
-"Do you want to install the updates ?"
+"- LOCAL (only connection from local machine),\n"
+"\n"
+"- NONE (no connection)."
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "เซิร์ฟเวอร์ NIS"
-
-#: ../../standalone/drakxtv:1
+#: security/help.pm:41
#, c-format
-msgid "Australian Optus cable TV"
+msgid ""
+"The argument specifies if clients are authorized to connect\n"
+"to the X server from the network on the tcp port 6000 or not."
msgstr ""
-#: ../../install_steps_newt.pm:1
+#: security/help.pm:44
#, c-format
msgid ""
-" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen "
-msgstr " <Tab>/<Alt-Tab> ระหว่างตัวเลือก | <Space> เลือก | <F12> หน้าถัดไป "
+"Authorize:\n"
+"\n"
+"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if "
+"set to \"ALL\",\n"
+"\n"
+"- only local ones if set to \"LOCAL\"\n"
+"\n"
+"- none if set to \"NONE\".\n"
+"\n"
+"To authorize the services you need, use /etc/hosts.allow (see hosts.allow"
+"(5))."
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: security/help.pm:54
#, c-format
-msgid "Subnet:"
+msgid ""
+"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n"
+"is greater than 3 in /etc/security/msec/security.conf, creates the\n"
+"symlink /etc/security/msec/server to point to\n"
+"/etc/security/msec/server.<SERVER_LEVEL>.\n"
+"\n"
+"The /etc/security/msec/server is used by chkconfig --add to decide to\n"
+"add a service if it is present in the file during the installation of\n"
+"packages."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "อาจจะ"
+#: security/help.pm:63
+#, c-format
+msgid ""
+"Enable/Disable crontab and at for users.\n"
+"\n"
+"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
+"and crontab(1))."
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "When"
-msgstr "Wheel"
+#: security/help.pm:68
+#, c-format
+msgid "Enable/Disable syslog reports to console 12"
+msgstr ""
-#: ../../network/adsl.pm:1
+#: security/help.pm:70
#, c-format
msgid ""
-"You need the Alcatel microcode.\n"
-"Download it at:\n"
-"%s\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+"Enable/Disable name resolution spoofing protection. If\n"
+"\"alert\" is true, also reports to syslog."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: security/help.pm:73
#, c-format
-msgid "Hour"
+msgid "Enable/Disable IP spoofing protection."
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: security/help.pm:75
#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "เซิรฟ์เวอร์ DNS เครื่องที่สอง (optional)"
+msgid "Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
-#: ../../lang.pm:1
+#: security/help.pm:77
#, c-format
-msgid "Finland"
-msgstr "ฟินแลนด์"
+msgid "Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: security/help.pm:79
#, c-format
-msgid "Color depth: %s\n"
-msgstr "อความละเอียดสี: %s\n"
+msgid "Enable/Disable msec hourly security check."
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: security/help.pm:81
#, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้ มันจำเป็นที่จะต้องถูก upgrade"
+msgid ""
+" Enabling su only from members of the wheel group or allow su from any user."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+#: security/help.pm:83
+#, c-format
+msgid "Use password to authenticate users."
+msgstr ""
-#: ../../standalone/drakclock:1
+#: security/help.pm:85
#, c-format
-msgid "Timezone - DrakClock"
+msgid "Activate/Disable ethernet cards promiscuity check."
msgstr ""
-#: ../../security/help.pm:1
+#: security/help.pm:87
#, c-format
-msgid "Enable/Disable the logging of IPv4 strange packets."
+msgid " Activate/Disable daily security check."
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Slovenia"
-msgstr "สโลวาเนีย"
+#: security/help.pm:89
+#, c-format
+msgid " Enable/Disable sulogin(8) in single user level."
+msgstr ""
-#: ../../standalone/mousedrake:1
-#, fuzzy, c-format
-msgid "Mouse test"
-msgstr "Mouse Systems"
+#: security/help.pm:91
+#, c-format
+msgid "Add the name as an exception to the handling of password aging by msec."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: security/help.pm:93
#, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Set password aging to \"max\" days and delay to change to \"inactive\"."
msgstr ""
-#: ../../any.pm:1
+#: security/help.pm:95
#, c-format
-msgid ""
-"Enter a user\n"
-"%s"
+msgid "Set the password history length to prevent password reuse."
msgstr ""
-"ให้ใส่ผู้ใช้\n"
-"%s"
-#: ../../standalone/harddrake2:1
+#: security/help.pm:97
#, c-format
msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
msgstr ""
-#: ../../standalone/draksplash:1
+#: security/help.pm:99
#, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Set the root umask."
+msgstr "ไม่มีรหัสผ่าน"
-#: ../../any.pm:1
+#: security/help.pm:100
#, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+msgid "if set to yes, check open ports."
msgstr ""
-"ต่อไปนี้เป็นข้อมูลต่างๆ\n"
-"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
-#: ../../help.pm:1
+#: security/help.pm:101
#, c-format
-msgid "/dev/hda"
-msgstr "/dev/hda"
+msgid ""
+"if set to yes, check for :\n"
+"\n"
+"- empty passwords,\n"
+"\n"
+"- no password in /etc/shadow\n"
+"\n"
+"- for users with the 0 id other than root."
+msgstr ""
-#: ../../help.pm:1
+#: security/help.pm:108
#, c-format
-msgid "/dev/hdb"
-msgstr "/dev/hdb"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
-#: ../../standalone/drakbug:1
+#: security/help.pm:109
#, c-format
-msgid ""
-"Application Name\n"
-"or Full Path:"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
msgstr ""
-#: ../../services.pm:1
+#: security/help.pm:110
#, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "if set to yes, run the daily security checks."
msgstr ""
-#: ../../harddrake/v4l.pm:1
+#: security/help.pm:111
#, c-format
-msgid "Radio support:"
+msgid "if set to yes, check additions/removals of sgid files."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-
-#: ../../any.pm:1
+#: security/help.pm:112
#, c-format
-msgid "LDAP"
+msgid "if set to yes, check empty password in /etc/shadow."
msgstr ""
-#: ../../bootloader.pm:1
+#: security/help.pm:113
#, c-format
-msgid "SILO"
-msgstr "SILO"
-
-#: ../../diskdrake/removable.pm:1
-#, fuzzy, c-format
-msgid "Change type"
-msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: security/help.pm:114
#, c-format
-msgid ", USB printer #%s"
+msgid "if set to yes, check additions/removals of suid root files."
msgstr ""
-#: ../../any.pm:1
+#: security/help.pm:115
#, c-format
-msgid "SILO Installation"
-msgstr "การติดตั้ง SILO"
+msgid "if set to yes, report unowned files."
+msgstr ""
-#: ../../install_messages.pm:1
+#: security/help.pm:116
#, c-format
-msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
+msgid "if set to yes, check files/directories writable by everybody."
msgstr ""
-"ขอแสดงความยินดี การติดตั้งเสร็จเรียบร้อย\n"
-"ให้เอาสื่อที่ใช้บูตออกจากไดรว์ (แผ่นฟล้อปปี้หรือซีดี) กดปุ่ม reboot เพื่อรีบูต\n"
-"\n"
-"\n"
-"สำหรับท่านที่ต้องการข้อมูลสำหรับการแก้ไขกับ ลีนุกซ์-แมนเดรก\n"
-"โปรดอ่าน Errata ได้ที่ \n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"ข้อมูลสำหรับการคอนฟิกระบบของคุณ สามารถหาได้จากช่วง\n"
-"บทหลังจากการติดตั้งของคู่มือแนะนำผู้ใช้งานลีนุกซ์-แมนเดรกฉบับเป็นทางการ"
-#: ../../standalone/drakclock:1
+#: security/help.pm:117
#, c-format
-msgid "Enable Network Time Protocol"
+msgid "if set to yes, run chkrootkit checks."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paranoid"
-
-#: ../../security/l10n.pm:1
+#: security/help.pm:118
#, c-format
-msgid "Do not send mails when unneeded"
+msgid ""
+"if set, send the mail report to this email address else send it to root."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: security/help.pm:119
#, c-format
-msgid "Your scanner(s) will not be available on the network."
+msgid "if set to yes, report check result by mail."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: security/help.pm:120
#, c-format
-msgid "Send mail report after each backup to:"
+msgid "Do not send mails if there's nothing to warn about"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: security/help.pm:121
#, c-format
-msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+msgid "if set to yes, run some checks against the rpm database."
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: security/help.pm:122
#, c-format
-msgid "Resolution"
-msgstr "ขนาดจอภาพ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+msgid "if set to yes, report check result to syslog."
msgstr ""
-"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ SMB ได้ คุณจะต้องใส่ข้อมูลของชื่อโฮสต์ที่\n"
-"เป็น SMB (โปรดสังเกตุว่า ชื่อโฮสต์แบบ SMB อาจแตกต่างจากชื่อโฮสต์\n"
-"แบบ TCP/IP) และข้อมูลค่า IP แอดเดรสของพรินต์เซิร์ฟเวอร์ รวมทั้ง\n"
-"ชื่อของเครื่องพิมพ์ที่ต้องการใช้ (share name) และชื่อของผู้ใช้ (username)\n"
-"รหัสผ่าน (password) และข้อมูลของเวิร์คกรุ๊ป (workgroup) ด้วย"
-#: ../../security/help.pm:1
+#: security/help.pm:123
#, c-format
-msgid ""
-" Enabling su only from members of the wheel group or allow su from any user."
+msgid "if set to yes, reports check result to tty."
msgstr ""
-#: ../../standalone/drakgw:1
+#: security/help.pm:125
#, c-format
-msgid "reconfigure"
-msgstr "คอนฟิกใหม่"
+msgid "Set shell commands history size. A value of -1 means unlimited."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: security/help.pm:127
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+msgid "Set the shell timeout. A value of zero means no timeout."
msgstr ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-#: ../../security/l10n.pm:1
-#, fuzzy, c-format
-msgid "Shell timeout"
-msgstr "Kernel Boot Timeout"
+#: security/help.pm:127
+#, c-format
+msgid "Timeout unit is second"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: security/help.pm:129
#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid "Set the user umask."
+msgstr "ชื่อผู้ใช้"
-#: ../../any.pm:1
+#: security/l10n.pm:11
#, c-format
-msgid "access to network tools"
+msgid "Accept bogus IPv4 error messages"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: security/l10n.pm:12
#, c-format
-msgid "Firmware-Upload for HP LaserJet 1000"
+msgid "Accept broadcasted icmp echo"
msgstr ""
-#: ../advertising/03-software.pl:1
+#: security/l10n.pm:13
#, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+msgid "Accept icmp echo"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: security/l10n.pm:15
#, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid "/etc/issue* exist"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: security/l10n.pm:16
#, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
+msgid "Reboot by the console user"
msgstr ""
-"การติดตั้ง aboot ล้มเหลว\n"
-"พยายามติดตั้งถึงแม้พาติชั่นแรกอาจจะเสียหาย?"
-#: ../../standalone/drakbackup:1
+#: security/l10n.pm:17
#, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "ลบคิว"
+msgid "Allow remote root login"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../standalone/drakbackup:1
+#: security/l10n.pm:18
#, c-format
-msgid ""
-"%s exists, delete?\n"
-"\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
+msgid "Direct root login"
msgstr ""
-#: ../../network/tools.pm:1
+#: security/l10n.pm:19
#, c-format
-msgid "Please fill or check the field below"
-msgstr "กรุณาเลือกช่องข้างล่างนี้"
+msgid "List users on display managers (kdm and gdm)"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: security/l10n.pm:20
#, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
-
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Boot Protocol"
-msgstr "Boot Protocol"
+msgid "Allow X Window connections"
+msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
-#: ../../diskdrake/interactive.pm:1
+#: security/l10n.pm:21
#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disks %s\n"
+msgid "Authorize TCP connections to X Window"
+msgstr ""
-#: ../../services.pm:1
+#: security/l10n.pm:22
#, c-format
-msgid "On boot"
-msgstr "ขณะ boot"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
+msgid "Authorize all services controlled by tcp_wrappers"
msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-#: ../../standalone/harddrake2:1
+#: security/l10n.pm:23
#, fuzzy, c-format
-msgid "Bus identification"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+msgid "Chkconfig obey msec rules"
+msgstr "ปรับแต่งการบริการต่างๆ"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Vatican"
-msgstr "ตำแหน่ง"
+#: security/l10n.pm:24
+#, c-format
+msgid "Enable \"crontab\" and \"at\" for users"
+msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1
+#: security/l10n.pm:25
#, c-format
-msgid "Please make a backup of your data first"
-msgstr "กรุณาทำ backup ก่อน"
+msgid "Syslog reports to console 12"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: security/l10n.pm:26
#, c-format
-msgid "ADSL adapters"
+msgid "Name resolution spoofing protection"
msgstr ""
-#: ../../install_interactive.pm:1
+#: security/l10n.pm:27
#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "คุณมี harddisk มากกว่า 1 ตัว คุณต้องการลง linux บน harddisk ตัวใหน"
+msgid "Enable IP spoofing protection"
+msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Eritrea"
-msgstr "ส่วนของผู้เชี่ยวชาญ"
+#: security/l10n.pm:28
+#, c-format
+msgid "Enable libsafe if libsafe is found on the system"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: security/l10n.pm:29
#, c-format
-msgid "Boot ISO"
+msgid "Enable the logging of IPv4 strange packets"
msgstr ""
-#: ../../network/adsl.pm:1
-#, fuzzy, c-format
-msgid "Firmware needed"
-msgstr "ถ้าต้องการ"
+#: security/l10n.pm:30
+#, c-format
+msgid "Enable msec hourly security check"
+msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Remove List"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+#: security/l10n.pm:31
+#, c-format
+msgid "Enable su only from the wheel group members or for any user"
+msgstr ""
-#: ../advertising/05-desktop.pl:1
+#: security/l10n.pm:32
#, c-format
-msgid "A customizable environment"
+msgid "Use password to authenticate users"
msgstr ""
-#: ../../keyboard.pm:1
+#: security/l10n.pm:33
#, c-format
-msgid "Inuktitut"
+msgid "Ethernet cards promiscuity check"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: security/l10n.pm:34
#, c-format
-msgid ""
-"Some protocols, like rsync, may be configured at the server end. Rather "
-"than using a directory path, you would use the 'module' name for the service "
-"path."
+msgid "Daily security check"
msgstr ""
-#: ../../lang.pm:1
+#: security/l10n.pm:35
#, c-format
-msgid "Morocco"
+msgid "Sulogin(8) in single user level"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: security/l10n.pm:36
#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "คุณมีเครื่องพิมพ์ชนิดใด?"
+msgid "No password aging for"
+msgstr "ไม่มีรหัสผ่าน"
-#: ../../printer/printerdrake.pm:1
+#: security/l10n.pm:37
+#, c-format
+msgid "Set password expiration and account inactivation delays"
+msgstr ""
+
+#: security/l10n.pm:38
#, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Password history length"
+msgstr "รหัสผ่านนี้ง่ายต่อการเดา"
-#: ../../standalone/drakbackup:1
+#: security/l10n.pm:39
#, c-format
-msgid " All of your selected data have been "
+msgid "Password minimum length and number of digits and upcase letters"
msgstr ""
-#: ../../lang.pm:1
+#: security/l10n.pm:40
+#, fuzzy, c-format
+msgid "Root umask"
+msgstr "ไม่มีรหัสผ่าน"
+
+#: security/l10n.pm:41
#, c-format
-msgid "Nepal"
+msgid "Shell history size"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: security/l10n.pm:42
#, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "ลบ"
+msgid "Shell timeout"
+msgstr "Kernel Boot Timeout"
+
+#: security/l10n.pm:43
+#, fuzzy, c-format
+msgid "User umask"
+msgstr "ชื่อผู้ใช้"
+
+#: security/l10n.pm:44
+#, fuzzy, c-format
+msgid "Check open ports"
+msgstr "ค้นหาเจอบน port %s"
-#: ../../harddrake/data.pm:1
+#: security/l10n.pm:45
#, c-format
-msgid "cpu # "
+msgid "Check for unsecured accounts"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: security/l10n.pm:46
#, c-format
-msgid "chunk size"
-msgstr "ขนาดของ chunk"
+msgid "Check permissions of files in the users' home"
+msgstr ""
-#: ../../security/help.pm:1
+#: security/l10n.pm:47
#, c-format
-msgid ""
-"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n"
-"\n"
-"If set to NONE, no issues are allowed.\n"
-"\n"
-"Else only /etc/issue is allowed."
+msgid "Check if the network devices are in promiscuous mode"
msgstr ""
-#: ../../security/help.pm:1
+#: security/l10n.pm:48
#, c-format
-msgid " Enable/Disable sulogin(8) in single user level."
+msgid "Run the daily security checks"
msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
+#: security/l10n.pm:49
#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "คำสั่งก่อน boot, หรือ 'c' ถ้าต้องการ command-line."
+msgid "Check additions/removals of sgid files"
+msgstr ""
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: security/l10n.pm:50
#, c-format
-msgid "Problems installing package %s"
-msgstr "ปัญหาการติดตั้งแพ็คเก็จ %s"
+msgid "Check empty password in /etc/shadow"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: security/l10n.pm:51
#, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "Verify checksum of the suid/sgid files"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: security/l10n.pm:52
#, c-format
-msgid "Add a scanner manually"
+msgid "Check additions/removals of suid root files"
msgstr ""
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Refresh"
-msgstr "ไม่ยอมรับ"
-
-#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "กู้ตารางพาร์ติชั่น"
-
-#: ../../standalone/drakboot:1
+#: security/l10n.pm:53
#, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "ใช่แล้ว ผมต้องการ autologin สำหรับผู้ใช้รายนี้"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Selected"
-msgstr "ลบคิว"
+msgid "Report unowned files"
+msgstr ""
-#: ../../standalone/drakfont:1
+#: security/l10n.pm:54
#, c-format
-msgid "Search for fonts in installed list"
+msgid "Check files/directories writable by everybody"
msgstr ""
-#: ../../standalone/drakgw:1
+#: security/l10n.pm:55
#, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
+msgid "Run chkrootkit checks"
msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
+#: security/l10n.pm:56
+#, c-format
+msgid "Do not send mails when unneeded"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: security/l10n.pm:57
#, c-format
-msgid " and the CD is in the drive"
+msgid "If set, send the mail report to this email address else send it to root"
msgstr ""
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+#: security/l10n.pm:58
+#, c-format
+msgid "Report check result by mail"
+msgstr ""
-#: ../../help.pm:1
+#: security/l10n.pm:59
#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
-"is best suited to particular types of configuration.\n"
-"\n"
-" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
-"will handle only very simple network cases and is somewhat slow when used\n"
-"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
-"experience with GNU/Linux.\n"
-"\n"
-" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"which may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
+msgid "Run some checks against the rpm database"
msgstr ""
-#: ../../keyboard.pm:1
+#: security/l10n.pm:60
#, c-format
-msgid "\"Menu\" key"
+msgid "Report check result to syslog"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: security/l10n.pm:61
#, c-format
-msgid ""
-"\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+msgid "Reports check result to tty"
msgstr ""
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
+#: security/level.pm:10
+#, c-format
+msgid "Welcome To Crackers"
+msgstr "Welcome To Crackers"
-#: ../../security/help.pm:1
+#: security/level.pm:11
#, c-format
-msgid "Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Poor"
+msgstr "ต่ำกว่ามาตรฐาน"
-#: ../../network/tools.pm:1
+#: security/level.pm:13
#, c-format
-msgid "Firmware copy succeeded"
-msgstr ""
+msgid "High"
+msgstr "สูง"
+
+#: security/level.pm:14
+#, fuzzy, c-format
+msgid "Higher"
+msgstr "สูง"
+
+#: security/level.pm:15
+#, c-format
+msgid "Paranoid"
+msgstr "Paranoid"
-#: ../../../move/tree/mdk_totem:1
+#: security/level.pm:41
#, c-format
msgid ""
-"You can't use another CDROM when the following programs are running: \n"
-"%s"
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
msgstr ""
-#: ../../security/help.pm:1
+#: security/level.pm:44
#, c-format
-msgid "if set to yes, check permissions of files in the users' home."
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: security/level.pm:45
#, c-format
msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "ฟอร์แมต Floppy"
-
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: security/level.pm:46
#, c-format
-msgid "Automated"
-msgstr "อัตโนมัติ"
+msgid ""
+"There are already some restrictions, and more automatic checks are run every "
+"night."
+msgstr ""
-#: ../../Xconfig/test.pm:1
+#: security/level.pm:47
#, c-format
-msgid "Do you want to test the configuration?"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+msgid ""
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: security/level.pm:50
#, c-format
msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save packages selection"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+#: security/level.pm:55
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "/Options/ทดลอง"
-#: ../../standalone/printerdrake:1
+#: security/level.pm:56
#, fuzzy, c-format
-msgid "/_Actions"
-msgstr "/_Options"
+msgid "Please choose the desired security level"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-#: ../../standalone/drakautoinst:1
+#: security/level.pm:60
#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "ฟอร์แมต loopback file %s"
+msgid "Security level"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+
+#: security/level.pm:62
+#, fuzzy, c-format
+msgid "Use libsafe for servers"
+msgstr "เลือกออปชั่นเพิ่มเติมสำหรับเซิร์ฟเวอร์"
-#: ../../standalone/drakbackup:1
+#: security/level.pm:63
#, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: security/level.pm:64
#, c-format
-msgid "No net boot images created!"
+msgid "Security Administrator (login or email)"
msgstr ""
-#: ../../network/adsl.pm:1
+#: services.pm:19
#, c-format
-msgid "use pptp"
-msgstr "ใช้ pptp"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgstr ""
-#: ../../services.pm:1
+#: services.pm:20
#, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "เลือกการบริการที่ต้องการให้เริ่มตั้งแต่การเริ่มทำงานของเครื่อง"
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron คือโปรแกรมสำหรับตั้งเวลาทำงาน"
-#: ../../security/l10n.pm:1
+#: services.pm:21
#, c-format
-msgid "Check files/directories writable by everybody"
+msgid ""
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
msgstr ""
+"apmd คือโปรแกรมดูแลสถานะของ battery \n"
+"มันสามารถจะปิดเครื่องเมื่อเวลา battery มีไฟน้อย"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
-
-#: ../../install_steps_interactive.pm:1
+#: services.pm:23
#, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "เลือกมิลเรอร์ไซต์ที่จะใช้ในการดาวน์โหลดแพ็คเก็จ"
+msgid ""
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: services.pm:25
#, c-format
msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
msgstr ""
-"ตัวเปลี่ยนขนาดไม่สามารถทำงานกับ partition ของคุณ\n"
-"มีข้อผิดพลาดนี้เกิดขึ้น: %s"
+"cron คือโปรแกรมมาตรฐานของ Unix ที่สั่งทำงานโปรแกรมในเวลาที่กำหนด\n"
+"vixie cron เพิ่มความสามารถให้กับ UNIX cron ซึ่งรวมถึงเพิ่ม\n"
+"ระบบความปลอดภัยและ option การปรับแต่งอื่นๆ"
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Size: "
-msgstr "ขนาด: %s"
+#: services.pm:28
+#, c-format
+msgid ""
+"FAM is a file monitoring daemon. It is used to get reports when files "
+"change.\n"
+"It is used by GNOME and KDE"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: services.pm:30
#, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "คุณต้องการย้ายไปเซ็กเตอร์ไหน"
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
+msgstr ""
+"GPM ทำให้สามารถใช้ mouse กับโปรแกรมที่รันใน text mode\n"
+"มันยังช่วยทำให้สามารถใช้ cut-and-paste และ popup-menu \n"
+"ด้วย"
-#: ../../lang.pm:1
+#: services.pm:33
#, c-format
-msgid "Bahamas"
+msgid ""
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "คุณต้องการใช้ aboot หรือไม่"
+#: services.pm:35
+#, c-format
+msgid ""
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache คือ World Wide Web server"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "การคอนฟิก"
+#: services.pm:36
+#, c-format
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
+msgstr ""
+"Internet superserver daemon (inetd) จะสั่งทำงานโปรแกรมหลายๆอย่าง\n"
+"เมื่อมีความต้องการเกิดขึ้น ตัวอย่างโปรแกรมที่มันรับผิดชอบคือ telnet\n"
+"ftp rsh และ rlogin การยกเลิก inetd จะทำให้โปรแกรมทั้งหมดที่มันรับ\n"
+"ผิดชอบอยู่ไม่ทำงาน"
-#: ../../standalone/logdrake:1
+#: services.pm:40
#, c-format
-msgid "search"
-msgstr "ค้นหา"
+msgid ""
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
+msgstr ""
-#: ../../services.pm:1
+#: services.pm:42
#, c-format
msgid ""
"This package loads the selected keyboard map as set in\n"
@@ -11290,7622 +12687,8543 @@ msgstr ""
"/etc/sysconfig/keyboard ซึ่งสามรถเลือกได้โดยใช้ kbdconfig\n"
"คุณควรปล่อยให้มันทำงานในเครื่องทั่วไป"
-#: ../../Xconfig/card.pm:1
+#: services.pm:45
#, c-format
-msgid "Xpmac (installation display driver)"
+msgid ""
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: services.pm:47
#, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Automatic detection and configuration of hardware at boot."
msgstr ""
-#: ../../security/help.pm:1
+#: services.pm:48
#, c-format
-msgid " Accept/Refuse icmp echo."
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
msgstr ""
-#: ../../services.pm:1
+#: services.pm:50
#, c-format
msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files. It is a good idea to always run syslog."
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
msgstr ""
+"lpd คือ print daemon ที่จำเป็นต้องมีถ้าต้องการให้ lpr ทำงานถูกต้อง\n"
+"ที่จริงแล้วมันคือ server ที่จัดการส่งงานพิมพ์ไปเครื่องพิมพ์"
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Generic"
-
-#: ../../standalone/drakxtv:1
+#: services.pm:52
#, c-format
-msgid "No TV Card detected!"
+msgid ""
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
+#: services.pm:54
#, fuzzy, c-format
-msgid "Options"
-msgstr "/Options/ทดลอง"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) คือ Domain Name Server (DNS) ทำหน้าที่แปลงชื่อ\n"
+"host names เป็น IP addresses."
-#: ../../printer/printerdrake.pm:1
+#: services.pm:55
#, c-format
-msgid "The printer \"%s\" is set as the default printer now."
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
msgstr ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
-#: ../../printer/printerdrake.pm:1
+#: services.pm:57
#, c-format
msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
msgstr ""
+"Activates/Deactivates network interfaces ทั้งหมด ที่ถูกตั้งให้\n"
+"เริ่มทำงานตอน boot"
-#: ../../standalone/harddrake2:1
+#: services.pm:59
#, c-format
-msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
msgstr ""
+"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
+"มันให้การทำงานของNFS server ที่ระบุในไฟล์ /etc/exports"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "ใช้ auto detection"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
+#: services.pm:62
+#, c-format
msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
msgstr ""
-"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
-"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
-"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
-"\n"
-"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"
+"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
+"มันให้การทำงานของNFS server "
-#: ../../harddrake/sound.pm:1
+#: services.pm:64
#, c-format
msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independent "
-"sound API (it's available on most UNIX(tm) systems) but it's a very basic "
-"and limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: services.pm:66
#, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Support the OKI 4w and compatible winprinters."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: services.pm:67
#, c-format
msgid ""
-"Please choose the printer you want to set up or enter a device name/file "
-"name in the input line"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops. It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
msgstr ""
+"PCMCIA สนับสนุนการทำงานของอุปกรณ์หลายๆอย่างเช่น\n"
+"ethernet หรือ modem ในคอมพิวเตอร์แบบพกพา"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: services.pm:70
#, c-format
-msgid "Refuse"
-msgstr "ไม่ยอมรับ"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper บริหารการติดต่อของ RPC ซึ่งใช้กับ\n"
+"protocols เช่น NFS และ NIS Portmap server ต้องทำงานบนเครื่อง\n"
+"ที่ทำหน้าที่เป็น server ของ protocal ซึ่งเรียกใช้การทำงานแบบ RPC"
-#: ../../standalone/draksec:1
-#, c-format
-msgid "LOCAL"
+#: services.pm:73
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
msgstr ""
+"Postfix เป็นโปรแกรมทำหน้าที่ส่งจดหมายจากเครื่องหนึ่ง\n"
+"ไปอีกเครื่องหนึ่ง"
-#: ../../diskdrake/hd_gtk.pm:1
+#: services.pm:74
#, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid ""
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
+msgstr ""
-#: ../../services.pm:1
+#: services.pm:76
#, c-format
msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
msgstr ""
-#: ../../fs.pm:1
+#: services.pm:78
#, c-format
-msgid "Creating and formatting file %s"
-msgstr "กำลังสร้างและ format ไฟล์ %s"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
-#: ../../security/help.pm:1
+#: services.pm:81
#, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: services.pm:83
#, c-format
msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: services.pm:85
#, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "เลือก LVM ที่มีอยู่เพื่อเพิ่มเข้าไป"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: services.pm:87
#, fuzzy, c-format
-msgid "xfs restart"
-msgstr "จำเพาะ"
+msgid "Launch the sound system on your machine"
+msgstr "รัน X-Window เมื่อเริ่มทำงาน"
-#: ../../printer/printerdrake.pm:1
+#: services.pm:88
#, c-format
msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files. It is a good idea to always run syslog."
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: services.pm:90
#, c-format
-msgid "Use the scanners on hosts: "
+msgid "Load the drivers for your usb devices."
msgstr ""
-#: ../../standalone/drakfont:1
+#: services.pm:91
+#, fuzzy, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "เริ่มและหยุด X Font Server ตอน boot และ เลิก"
+
+#: services.pm:117 services.pm:159
#, c-format
-msgid "Unselected All"
-msgstr ""
+msgid "Choose which services should be automatically started at boot time"
+msgstr "เลือกการบริการที่ต้องการให้เริ่มตั้งแต่การเริ่มทำงานของเครื่อง"
-#: ../../install_steps_interactive.pm:1 ../../network/tools.pm:1
+#: services.pm:129
+#, fuzzy, c-format
+msgid "Printing"
+msgstr "เครื่องพิมพ์"
+
+#: services.pm:130
#, c-format
-msgid "No partition available"
-msgstr "ไม่มีพาร์ติชั่นเหลือ"
+msgid "Internet"
+msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
-#: ../../standalone/printerdrake:1
+#: services.pm:133
+#, c-format
+msgid "File sharing"
+msgstr ""
+
+#: services.pm:140
#, fuzzy, c-format
-msgid "Printer Management \n"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Remote Administration"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
-#: ../../standalone/logdrake:1
+#: services.pm:148
#, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "ชื่อโดเมน"
+msgid "Database Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#: ../../diskdrake/interactive.pm:1
+#: services.pm:211
#, c-format
-msgid "Encryption key (again)"
-msgstr ""
+msgid "running"
+msgstr "กำลังทำงาน"
-#: ../../printer/printerdrake.pm:1
+#: services.pm:211
#, c-format
-msgid "Samba share name missing!"
+msgid "stopped"
+msgstr "หยุด"
+
+#: services.pm:215
+#, c-format
+msgid "Services and deamons"
msgstr ""
-#: ../../standalone/drakfont:1
+#: services.pm:221
#, c-format
-msgid "True Type install done"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
msgstr ""
+"ไม่มีข้อมูลเพิ่มเติม\n"
+"สำหรับการบริการนี้ ขอโทษครับ"
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "ค้นหาเจอบน port %s"
+#: services.pm:226 ugtk2.pm:1139
+#, c-format
+msgid "Info"
+msgstr "ข้อมูล"
-#: ../../standalone/drakTermServ:1
+#: services.pm:229
#, c-format
-msgid "Build Whole Kernel -->"
+msgid "Start when requested"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: services.pm:229
+#, c-format
+msgid "On boot"
+msgstr "ขณะ boot"
+
+#: services.pm:244
#, fuzzy, c-format
-msgid "modem"
-msgstr "Mouse"
+msgid "Start"
+msgstr "สถานะ:"
-#: ../../lang.pm:1
-#, c-format
-msgid "Welcome to %s"
-msgstr "ยินดีต้อนรับสู่ %s"
+#: services.pm:244
+#, fuzzy, c-format
+msgid "Stop"
+msgstr "เซ็กเตอร์"
-#: ../../standalone/drakhelp:1
+#: share/advertising/dis-01.pl:13 share/advertising/dwd-01.pl:13
+#: share/advertising/ppp-01.pl:13 share/advertising/pwp-01.pl:13
#, c-format
-msgid ""
-" drakhelp 0.1\n"
-"Copyright (C) 2003 MandrakeSoft.\n"
-"This is free software and may be redistributed under the terms of the GNU "
-"GPL.\n"
-"\n"
-"Usage: \n"
+msgid "<b>Congratulations for choosing Mandrake Linux!</b>"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: share/advertising/dis-01.pl:15 share/advertising/dwd-01.pl:15
+#: share/advertising/ppp-01.pl:15 share/advertising/pwp-01.pl:15
#, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "
+msgid "Welcome to the Open Source world!"
+msgstr "ทดสอบการคอนฟิก"
-#: ../../standalone/drakboot:1
+#: share/advertising/dis-01.pl:17
#, c-format
-msgid "Bootsplash"
+msgid ""
+"Your new Mandrake Linux operating system and its many applications is the "
+"result of collaborative efforts between MandrakeSoft developers and Mandrake "
+"Linux contributors throughout the world."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: share/advertising/dis-01.pl:19 share/advertising/dwd-01.pl:19
+#: share/advertising/ppp-01.pl:19
+#, c-format
msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+"We would like to thank everyone who participated in the development of this "
+"latest release."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: share/advertising/dis-02.pl:13
#, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "เครื่องพิมพ์"
+msgid "<b>Discovery</b>"
+msgstr "Driver"
-#: ../../printer/printerdrake.pm:1
+#: share/advertising/dis-02.pl:15
#, c-format
msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"Discovery is the easiest and most user-friendly Linux distribution. It "
+"includes a hand-picked selection of premium software for Office, Multimedia "
+"and Internet activities."
msgstr ""
-#: ../../standalone/drakclock:1
+#: share/advertising/dis-02.pl:17
#, c-format
-msgid "DrakClock"
+msgid "The menu is task-oriented, with a single selected application per task."
msgstr ""
-#: ../../modules/interactive.pm:1
+#: share/advertising/dis-03.pl:13
+#, c-format
+msgid "<b>The KDE Choice</b>"
+msgstr ""
+
+#: share/advertising/dis-03.pl:15
#, c-format
msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"The powerful Open Source graphical desktop environment KDE is the desktop of "
+"choice for the Discovery Pack."
msgstr ""
-"ในบางกรณี สำหรับไดรเวอร์ %s จะจำเป็นต้องใช้ข้อมูลเพิ่มเติมเพื่อ\n"
-"ให้สามารถทำงานได้ถูกต้อง แม้ว่าไดรเวอร์อาจทำงานได้โดยปกติ โดยปราศจาก\n"
-"ข้อมูลดังกล่าว คุณต้องการจะระบุอ๊อปชั่นเพิ่มเติมพิเศษหรือให้โปรแกรมทำการ\n"
-"ตรวจหาข้อมูลที่จำเป็นต้องใช้? ในบางกรณีการตรวจหาอาจทำให้คอมพิวเตอร์แฮงค์\n"
-"แต่จะไม่เป็นอันตรายกับคอมพิวเตอร์"
-#: ../../standalone/drakbackup:1
+#: share/advertising/dis-04.pl:13
#, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "<b>OpenOffice.org</b>: The complete Linux office suite."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: share/advertising/dis-04.pl:15
#, c-format
msgid ""
-"\n"
-"- Daemon, %s via:\n"
+"<b>WRITER</b> is a powerful word processor for creating all types of text "
+"documents. Documents may include images, diagrams and tables."
msgstr ""
-#: ../../lang.pm:1
+#: share/advertising/dis-04.pl:16
#, c-format
-msgid "Cuba"
+msgid ""
+"<b>CALC</b> is a feature-packed spreadsheet which enables you to compute, "
+"analyze and manage all of your data."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: share/advertising/dis-04.pl:17
#, c-format
-msgid "October"
-msgstr "ตุลาคม"
+msgid ""
+"<b>IMPRESS</b> is the fastest, most powerful way to create effective "
+"multimedia presentations."
+msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Belize"
-msgstr "เปลี่ยนขนาด"
+#: share/advertising/dis-04.pl:18
+#, c-format
+msgid ""
+"<b>DRAW</b> will produce everything from simple diagrams to dynamic 3D "
+"illustrations."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: share/advertising/dis-05.pl:13 share/advertising/dis-06.pl:13
#, fuzzy, c-format
-msgid "Searching for new printers..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "<b>Surf The Internet</b>"
+msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
-#: ../../standalone/drakbackup:1
+#: share/advertising/dis-05.pl:15
#, c-format
-msgid " (multi-session)"
+msgid "Discover the new integrated personal information suite KDE Kontact."
msgstr ""
-#: ../../any.pm:1
+#: share/advertising/dis-05.pl:17
#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
+msgid ""
+"More than just a full-featured email client, <b>Kontact</b> also includes an "
+"address book, a calendar and scheduling program, plus a tool for taking "
+"notes!"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: share/advertising/dis-06.pl:15
#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "You can also:"
msgstr ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-#: ../../security/help.pm:1
+#: share/advertising/dis-06.pl:16
#, c-format
-msgid " Activate/Disable daily security check."
+msgid "\t- browse the Web"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: share/advertising/dis-06.pl:17
#, c-format
-msgid "\t-CD-R.\n"
+msgid "\t- chat"
msgstr ""
-#: ../../security/l10n.pm:1
+#: share/advertising/dis-06.pl:18
#, c-format
-msgid "Enable libsafe if libsafe is found on the system"
+msgid "\t- organize a video-conference"
msgstr ""
-#: ../../install_interactive.pm:1
+#: share/advertising/dis-06.pl:19
#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "The DrakX Partitioning wizard เจอทางเลือกดังต่อไปนี้"
+msgid "\t- create your own Web site"
+msgstr ""
-#: ../../keyboard.pm:1
+#: share/advertising/dis-06.pl:20
#, c-format
-msgid "Hungarian"
-msgstr "อังการี"
+msgid "\t- ..."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: share/advertising/dis-07.pl:13
#, c-format
-msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+msgid "<b>Multimedia</b>: Software for every need!"
msgstr ""
-"เลือกผู้ให้บริการ\n"
-"ถ้าไม่มีเลือก ไม่มี (unlisted)"
-#: ../../install_steps_interactive.pm:1
+#: share/advertising/dis-07.pl:15
#, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid "Listen to audio CDs with <b>KsCD</b>."
msgstr ""
-#: ../../network/adsl.pm:1
-#, fuzzy, c-format
-msgid "Use my Windows partition"
-msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"
+#: share/advertising/dis-07.pl:17
+#, c-format
+msgid "Listen to music files and watch videos with <b>Totem</b>."
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: share/advertising/dis-07.pl:19
#, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid "View and edit images and photos with <b>GQview</b> and <b>The Gimp!</b>"
+msgstr ""
-#: ../../any.pm:1
+#: share/advertising/dis-08.pl:13 share/advertising/ppp-08.pl:13
+#: share/advertising/pwp-07.pl:13
#, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "<b>Mandrake Control Center</b>"
+msgstr "Control Center"
-#: ../../services.pm:1
+#: share/advertising/dis-08.pl:15 share/advertising/ppp-08.pl:15
+#: share/advertising/pwp-07.pl:15
#, c-format
msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops. It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"The Mandrake Control Center is an essential collection of Mandrake-specific "
+"utilities for simplifying the configuration of your computer."
msgstr ""
-"PCMCIA สนับสนุนการทำงานของอุปกรณ์หลายๆอย่างเช่น\n"
-"ethernet หรือ modem ในคอมพิวเตอร์แบบพกพา"
-#: ../../network/tools.pm:1
+#: share/advertising/dis-08.pl:17 share/advertising/ppp-08.pl:17
+#: share/advertising/pwp-07.pl:17
+#, c-format
+msgid ""
+"You will immediately appreciate this collection of handy utilities for "
+"easily configuring hardware devices, defining mount points, setting up "
+"Network and Internet, adjusting the security level of your computer, and "
+"just about everything related to the system."
+msgstr ""
+
+#: share/advertising/dis-09.pl:13 share/advertising/dwd-06.pl:13
+#: share/advertising/ppp-09.pl:13 share/advertising/pwp-08.pl:13
#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "เลือกคีย์บอร์ด"
+msgid "<b>MandrakeStore</b>"
+msgstr "Control Center"
-#: ../../standalone/drakbackup:1
+#: share/advertising/dis-09.pl:15 share/advertising/ppp-09.pl:15
+#: share/advertising/pwp-08.pl:15
#, c-format
msgid ""
-"\n"
-"- System Files:\n"
+"Find all MandrakeSoft products and services at <b>MandrakeStore</b> -- our "
+"full service e-commerce platform."
msgstr ""
-#: ../../standalone/drakbug:1
+#: share/advertising/dis-09.pl:17 share/advertising/dwd-06.pl:19
+#: share/advertising/ppp-09.pl:17 share/advertising/pwp-08.pl:17
#, c-format
-msgid "Standalone Tools"
+msgid "Stop by today at <b>www.mandrakestore.com</b>"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: share/advertising/dis-10.pl:13 share/advertising/ppp-10.pl:13
+#: share/advertising/pwp-09.pl:13
#, fuzzy, c-format
-msgid "Where"
-msgstr "Wheel"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "but not matching"
-msgstr "but not matching"
+msgid "Become a <b>MandrakeClub</b> member!"
+msgstr "แบบผู้เชี่ยวชาญ (Expert)"
-#: ../../harddrake/sound.pm:1
+#: share/advertising/dis-10.pl:15 share/advertising/ppp-10.pl:15
+#: share/advertising/pwp-09.pl:15
#, c-format
msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+"Take advantage of valuable benefits, products and services by joining "
+"MandrakeClub, such as:"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: share/advertising/dis-10.pl:16 share/advertising/dwd-07.pl:16
+#: share/advertising/ppp-10.pl:17 share/advertising/pwp-09.pl:16
#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "กำลังคอนฟิกการ์ด PCMCIA..."
-
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "ไม่มี kdesu "
+msgid "\t- Full access to commercial applications"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: share/advertising/dis-10.pl:17 share/advertising/dwd-07.pl:17
+#: share/advertising/ppp-10.pl:18 share/advertising/pwp-09.pl:17
#, c-format
-msgid "%s: %s requires a username...\n"
+msgid "\t- Special download mirror list exclusively for MandrakeClub Members"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: share/advertising/dis-10.pl:18 share/advertising/dwd-07.pl:18
+#: share/advertising/ppp-10.pl:19 share/advertising/pwp-09.pl:18
#, c-format
-msgid "Encryption key"
+msgid "\t- Voting for software to put in Mandrake Linux"
msgstr ""
-#: ../../mouse.pm:1
+#: share/advertising/dis-10.pl:19 share/advertising/dwd-07.pl:19
+#: share/advertising/ppp-10.pl:20 share/advertising/pwp-09.pl:19
#, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "\t- Special discounts for products and services at MandrakeStore"
+msgstr ""
-#: ../../keyboard.pm:1
+#: share/advertising/dis-10.pl:20 share/advertising/dwd-07.pl:20
+#: share/advertising/ppp-04.pl:21 share/advertising/ppp-06.pl:19
+#: share/advertising/ppp-10.pl:21 share/advertising/pwp-04.pl:21
+#: share/advertising/pwp-09.pl:20
#, c-format
-msgid ""
-"This setting will be activated after the installation.\n"
-"During installation, you will need to use the Right Control\n"
-"key to switch between the different keyboard layouts."
+msgid "\t- Plus much more"
msgstr ""
-#: ../../lang.pm:1
+#: share/advertising/dis-10.pl:22 share/advertising/dwd-07.pl:22
+#: share/advertising/ppp-10.pl:23 share/advertising/pwp-09.pl:22
#, c-format
-msgid "Christmas Island"
+msgid "For more information, please visit <b>www.mandrakeclub.com</b>"
msgstr ""
-#: ../../mouse.pm:1
+#: share/advertising/dis-11.pl:13
#, fuzzy, c-format
-msgid "Automatic"
-msgstr "กำหนดค่า IP แบบอัตโนมัติ"
+msgid "Do you require assistance?"
+msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"
-#: ../../install_steps_interactive.pm:1
+#: share/advertising/dis-11.pl:15 share/advertising/dwd-08.pl:16
+#: share/advertising/ppp-11.pl:15 share/advertising/pwp-10.pl:15
#, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "การติดตั้ง bootloader ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
+msgid "<b>MandrakeExpert</b> is the primary source for technical support."
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: share/advertising/dis-11.pl:17 share/advertising/dwd-08.pl:18
+#: share/advertising/ppp-11.pl:17 share/advertising/pwp-10.pl:17
#, c-format
-msgid "EIDE/SCSI channel"
+msgid ""
+"If you have Linux questions, subscribe to MandrakeExpert at <b>www."
+"mandrakeexpert.com</b>"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: share/advertising/dwd-01.pl:17
#, c-format
-msgid "Set this printer as the default"
+msgid ""
+"Mandrake Linux is committed to the Open Source Model and fully respects the "
+"General Public License. This new release is the result of collaboration "
+"between MandrakeSoft's team of developers and the worldwide community of "
+"Mandrake Linux contributors."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Verify that %s is the correct path"
-msgstr "ถูกต้องหรือไม่?"
-
-#: ../../install_interactive.pm:1
+#: share/advertising/dwd-02.pl:13
#, c-format
-msgid "partition %s"
-msgstr "พาร์ติชั่น %s"
+msgid "<b>Join the Mandrake Linux community!</b>"
+msgstr ""
-#: ../../security/level.pm:1
+#: share/advertising/dwd-02.pl:15
#, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "NIS"
-msgstr "ใช้ NIS"
+msgid ""
+"If you would like to get involved, please subscribe to the \"Cooker\" "
+"mailing list by visiting <b>mandrake-linux.com/cooker</b>"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: share/advertising/dwd-02.pl:17
#, c-format
-msgid "<-- Del User"
+msgid ""
+"To learn more about our dynamic community, please visit <b>www.mandrake-"
+"linux.com</b>!"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: share/advertising/dwd-03.pl:13
#, c-format
-msgid "Location on the bus"
+msgid "<b>What is Mandrake Linux?</b>"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-
-#: ../../standalone/harddrake2:1
+#: share/advertising/dwd-03.pl:15
#, c-format
-msgid "the vendor name of the device"
+msgid ""
+"Mandrake Linux is an Open Source distribution created with thousands of the "
+"choicest applications from the Free Software world. Mandrake Linux is one of "
+"the most widely used Linux distributions worldwide!"
msgstr ""
-#: ../../help.pm:1 ../../install_interactive.pm:1
+#: share/advertising/dwd-03.pl:17
#, c-format
-msgid "Erase entire disk"
-msgstr "ลบ disk ทั้งหมด"
+msgid ""
+"Mandrake Linux includes the famous graphical desktops KDE and GNOME, plus "
+"the latest versions of the most popular Open Source applications."
+msgstr ""
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: share/advertising/dwd-04.pl:13
#, c-format
-msgid " (Default)"
-msgstr " (Default)"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Boot Style Configuration"
+msgid ""
+"Mandrake Linux is widely known as the most user-friendly and the easiest to "
+"install and easy to use Linux distribution."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: share/advertising/dwd-04.pl:15
#, c-format
-msgid "Receiving Speed:"
+msgid "Find out about our <b>Personal Solutions</b>:"
msgstr ""
-#: ../../lang.pm:1
+#: share/advertising/dwd-04.pl:16
#, c-format
-msgid "Turks and Caicos Islands"
+msgid "\t- Find out Mandrake Linux on a bootable CD with <b>MandrakeMove</b>"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: share/advertising/dwd-04.pl:17
#, c-format
-msgid "No Ip"
+msgid ""
+"\t- If you use Linux mostly for Office, Internet and Multimedia tasks, "
+"<b>Discovery</b> perfectly meets your needs"
msgstr ""
-#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: share/advertising/dwd-04.pl:18
#, c-format
-msgid "<- Previous"
-msgstr "<- ก่อน"
+msgid ""
+"\t- If you appreciate the largest selection of software including powerful "
+"development tools, <b>PowerPack</b> is for you"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: share/advertising/dwd-04.pl:19
#, c-format
-msgid "Transfer Now"
+msgid ""
+"\t- If you require a full-featured Linux solution customized for small to "
+"medium-sized networks, choose <b>PowerPack+</b>"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: share/advertising/dwd-05.pl:13
#, c-format
-msgid "Set root password and network authentication methods"
+msgid "Find out also our <b>Business Solutions</b>!"
msgstr ""
-#: ../../ugtk2.pm:1
+#: share/advertising/dwd-05.pl:15
#, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "เปลี่ยนไปมาระหว่างการจัดเรียงแบบ flat หรือ group"
+msgid ""
+"<b>Corporate Server</b>: the ideal solution for entreprises. It is a "
+"complete \"all-in-one\" solution that includes everything needed to rapidly "
+"deploy world-class Linux server applications."
+msgstr ""
-#: ../../standalone/drakboot:1
+#: share/advertising/dwd-05.pl:17
#, c-format
-msgid "Themes"
+msgid ""
+"<b>Multi Network Firewall</b>: based on Linux 2.4 \"kernel secure\" to "
+"provide multi-VPN as well as multi-DMZ functionalities. It is the perfect "
+"high performance security solution."
msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Options: %s"
-msgstr "พาร์ติชั่น %s"
-
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
+#: share/advertising/dwd-05.pl:19
+#, c-format
msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
+"<b>MandrakeClustering</b>: the power and speed of a Linux cluster combined "
+"with the stability and easy-of-use of the world-famous Mandrake Linux "
+"distribution. A unique blend for incomparable HPC performance."
msgstr ""
-"ยินดีต้อนรับสู่เครื่องมือในการติดต่อ internet แบบ share\n"
-"\n"
-"%s\n"
-"\n"
-"กด ``Ok'' ถ้าคุณต้องการเริ่มการทำงานของ setup wizard"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "การคอนฟิก Internet"
-#: ../../lang.pm:1
+#: share/advertising/dwd-06.pl:15
#, c-format
-msgid "Saint Helena"
+msgid ""
+"Find all MandrakeSoft products at <b>MandrakeStore</b> -- our full service e-"
+"commerce platform."
msgstr ""
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Parallel port #%s"
-msgstr "ชื่อของเครื่องพิมพ์"
+#: share/advertising/dwd-06.pl:17
+#, c-format
+msgid ""
+"Find out also support incidents if you have any problems, from standard to "
+"professional support, from 1 to 50 incidents, take the one which meets "
+"perfectly your needs!"
+msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: share/advertising/dwd-07.pl:13
#, fuzzy, c-format
-msgid "Security Level"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+msgid "<b>Become a MandrakeClub member!</b>"
+msgstr "แบบผู้เชี่ยวชาญ (Expert)"
-#: ../../install_steps_interactive.pm:1
+#: share/advertising/dwd-07.pl:15
#, c-format
msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+"Take advantage of valuable benefits, products and services by joining "
+"Mandrake Club, such as:"
msgstr ""
-"ขั้นตอนบางขั้นตอนไม่สมบูรณ์\n"
-"\n"
-"คุณต้องการออกจากการติดตั้งจริงๆหรือไม่?"
-#: ../../lang.pm:1
+#: share/advertising/dwd-08.pl:14 share/advertising/ppp-11.pl:13
+#: share/advertising/pwp-10.pl:13
#, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
+msgid "<b>Do you require assistance?</b>"
+msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"
-#: ../../keyboard.pm:1
+#: share/advertising/dwd-09.pl:16
#, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polish (qwertz layout)"
+msgid "<b>Note</b>"
+msgstr ""
-#: ../../lang.pm:1
+#: share/advertising/dwd-09.pl:18
#, c-format
-msgid "Syria"
+msgid "This is the Mandrake Linux <b>Download version</b>."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: share/advertising/dwd-09.pl:20
#, c-format
msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), "
-"an HP PhotoSmart or an HP LaserJet 2200?"
+"The free download version does not include commercial software, and "
+"therefore may not work with certain modems (such as some ADSL and RTC) and "
+"video cards (such as ATI® and NVIDIA®)."
msgstr ""
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: share/advertising/ppp-01.pl:17
#, c-format
msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
+"Your new Mandrake Linux distribution and its many applications are the "
+"result of collaborative efforts between MandrakeSoft developers and Mandrake "
+"Linux contributors throughout the world."
msgstr ""
-"ยินดีต้อนรับสู่ %s โปรแกรมเลือกใช้ระบบปฏิบัติการ!\n"
-"\n"
-"เลือกระบบปฏิบัติการหรือ\n"
-"รอ %d วินาทีเพื่อใช้การบูตจากตัวเลือกตั้งต้น\n"
-"\n"
-#: ../../keyboard.pm:1
+#: share/advertising/ppp-02.pl:13
#, c-format
-msgid "Portuguese"
-msgstr "โปรตุเกส"
+msgid "<b>PowerPack+</b>"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: share/advertising/ppp-02.pl:15
#, c-format
-msgid "Loopback file name: "
-msgstr "ชื่อ Loopback file: "
-
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
+msgid ""
+"PowerPack+ is a full-featured Linux solution for small to medium-sized "
+"networks. PowerPack+ increases the value of the standard PowerPack by adding "
+"a comprehensive selection of world-class server applications."
+msgstr ""
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Left Control key"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+#: share/advertising/ppp-02.pl:17
+#, c-format
+msgid ""
+"It is the only Mandrake Linux product that includes the groupware solution."
+msgstr ""
-#: ../../lang.pm:1
+#: share/advertising/ppp-03.pl:13 share/advertising/pwp-03.pl:13
#, fuzzy, c-format
-msgid "Serbia"
-msgstr "พอร์ตอนุกรม"
+msgid "<b>Choose your graphical Desktop environment!</b>"
+msgstr "Graphical Desktops อื่นๆ"
-#: ../../standalone/drakxtv:1
+#: share/advertising/ppp-03.pl:15 share/advertising/pwp-03.pl:15
#, c-format
-msgid "Newzealand"
+msgid ""
+"When you log into your Mandrake Linux system for the first time, you can "
+"choose between several popular graphical desktops environments, including: "
+"KDE, GNOME, WindowMaker, IceWM, and others."
msgstr ""
-#: ../../fsedit.pm:1
+#: share/advertising/ppp-04.pl:13
#, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "This directory should remain within the root filesystem"
+msgid ""
+"In the Mandrake Linux menu you will find easy-to-use applications for all "
+"tasks:"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: share/advertising/ppp-04.pl:15 share/advertising/pwp-04.pl:15
#, c-format
-msgid "Across Network"
+msgid "\t- Create, edit and share office documents with <b>OpenOffice.org</b>"
msgstr ""
-#: ../../keyboard.pm:1
+#: share/advertising/ppp-04.pl:16
#, c-format
-msgid "CapsLock key"
+msgid ""
+"\t- Take charge of your personal data with the integrated personal "
+"information suites: <b>Kontact</b> and <b>Evolution</b>"
msgstr ""
-#: ../../steps.pm:1
+#: share/advertising/ppp-04.pl:17
#, c-format
-msgid "Install bootloader"
-msgstr "ติดตั้งบูตโหลดเดอร์"
+msgid "\t- Browse the Web with <b>Mozilla and Konqueror</b>"
+msgstr ""
-#: ../../Xconfig/card.pm:1
+#: share/advertising/ppp-04.pl:18 share/advertising/pwp-04.pl:18
#, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "เลือกขนาดหน่วยความจำของกราฟฟิคการ์ด"
+msgid "\t- Participate in online chat with <b>Kopete</b>"
+msgstr ""
-#: ../../security/help.pm:1
+#: share/advertising/ppp-04.pl:19
#, c-format
msgid ""
-"Enable/Disable crontab and at for users.\n"
-"\n"
-"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n"
-"and crontab(1))."
+"\t- Listen to audio CDs and music files with <b>KsCD</b> and <b>Totem</b>"
msgstr ""
-#: ../../standalone.pm:1
+#: share/advertising/ppp-04.pl:20 share/advertising/pwp-04.pl:20
#, c-format
-msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
-"\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+msgid "\t- Edit images and photos with <b>The Gimp</b>"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: share/advertising/ppp-05.pl:13
#, c-format
-msgid "Dynamic IP Address Pool:"
+msgid ""
+"PowerPack+ includes everything needed for developing and creating your own "
+"software, including:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: share/advertising/ppp-05.pl:15 share/advertising/pwp-05.pl:16
#, c-format
-msgid "LVM name?"
-msgstr "ชื่อ LVM"
+msgid ""
+"\t- <b>Kdevelop</b>: a full featured, easy to use Integrated Development "
+"Environment for C++ programming"
+msgstr ""
-#: ../../standalone/service_harddrake:1
+#: share/advertising/ppp-05.pl:16 share/advertising/pwp-05.pl:17
#, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
+msgid "\t- <b>GCC</b>: the GNU Compiler Collection"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: share/advertising/ppp-05.pl:17 share/advertising/pwp-05.pl:18
#, c-format
-msgid "Found %s %s interfaces"
-msgstr "ตรวจพบ %s อินเทอร์เฟส %s"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "ติดตั้ง"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "\t- <b>GDB</b>: the GNU Project debugger"
+msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: share/advertising/ppp-05.pl:18 share/advertising/pwp-06.pl:16
#, c-format
-msgid "Card IRQ"
-msgstr "Card IRQ"
+msgid "\t- <b>Emacs</b>: a customizable and real time display editor"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: share/advertising/ppp-05.pl:19
#, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid ""
+"\t- <b>Xemacs</b>: open source text editor and application development system"
+msgstr ""
-#: ../../standalone.pm:1
+#: share/advertising/ppp-05.pl:20
#, c-format
msgid ""
-"Font Importation and monitoring "
-"application \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts : show all fonts that already exist from xls\n"
-"--strong : strong verification of font.\n"
-"--install : accept any font file and any directry.\n"
-"--uninstall : uninstall any font or any directory of font.\n"
-"--replace : replace all font if already exist\n"
-"--application : 0 none application.\n"
-" : 1 all application available supported.\n"
-" : name_of_application like so for staroffice \n"
-" : and gs for ghostscript for only this one."
+"\t- <b>Vim</b>: advanced text editor with more features than standard Vi"
msgstr ""
-#: ../../standalone.pm:1
+#: share/advertising/ppp-06.pl:13
#, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "<b>Discover the full-featured groupware solution!</b>"
msgstr ""
-#: ../../any.pm:1
+#: share/advertising/ppp-06.pl:15
#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ให้เลือกฟล้อปปี้ไดรว์ที่คุณต้องการทำเป็นแผ่นบูต"
+msgid "It includes both server and client features for:"
+msgstr ""
-#: ../../bootloader.pm:1 ../../help.pm:1
+#: share/advertising/ppp-06.pl:16
#, c-format
-msgid "LILO with text menu"
-msgstr "LILO แบบ text menu"
+msgid "\t- Sending and receiving emails"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: share/advertising/ppp-06.pl:17
#, c-format
-msgid "instantaneous"
+msgid ""
+"\t- Calendar, Task List, Memos, Contacts, Meeting Request (sending and "
+"receiving), Task Requests (sending and receiving)"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: share/advertising/ppp-06.pl:18
#, c-format
-msgid "Everything (no firewall)"
+msgid "\t- Address Book (server and client)"
msgstr ""
-#: ../../any.pm:1
+#: share/advertising/ppp-07.pl:13
#, c-format
-msgid "You must specify a kernel image"
+msgid ""
+"Empower your business network with <b>premier server solutions</b> including:"
msgstr ""
-#: ../../printer/main.pm:1
+#: share/advertising/ppp-07.pl:15
#, c-format
-msgid ", multi-function device on USB"
+msgid "\t- <b>Samba</b>: File and print services for MS-Windows clients"
msgstr ""
-#: ../../interactive/newt.pm:1
-#, fuzzy, c-format
-msgid "Do"
-msgstr "ทำเรียบร้อยแล้ว"
+#: share/advertising/ppp-07.pl:16
+#, c-format
+msgid "\t- <b>Apache</b>: The most widely used Web server"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: share/advertising/ppp-07.pl:17
#, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"
+msgid "\t- <b>MySQL</b>: The world's most popular Open Source database"
+msgstr ""
-#: ../../keyboard.pm:1
+#: share/advertising/ppp-07.pl:18
#, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuanian AZERTY (old)"
+msgid ""
+"\t- <b>CVS</b>: Concurrent Versions System, the dominant open-source network-"
+"transparent version control system"
+msgstr ""
-#: ../../keyboard.pm:1
+#: share/advertising/ppp-07.pl:19
#, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "บราซิล"
+msgid ""
+"\t- <b>ProFTPD</b>: the highly configurable GPL-licensed FTP server software"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: share/advertising/ppp-07.pl:20
#, c-format
-msgid "IP address of host/network:"
+msgid "\t- And others"
msgstr ""
-#: ../../standalone/draksplash:1
+#: share/advertising/pwp-01.pl:17
#, c-format
msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+"Your new Mandrake Linux distribution is the result of collaborative efforts "
+"between MandrakeSoft developers and Mandrake Linux contributors throughout "
+"the world."
msgstr ""
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "การติดตั้ง SILO"
-
-#: ../../lang.pm:1
+#: share/advertising/pwp-01.pl:19
#, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid ""
+"We would like to thank everyone who participated in the development of our "
+"latest release."
msgstr ""
-#: ../../security/help.pm:1
+#: share/advertising/pwp-02.pl:13
#, c-format
-msgid "Allow/Forbid reboot by the console user."
+msgid "<b>PowerPack</b>"
msgstr ""
-#: ../../standalone/logdrake:1
+#: share/advertising/pwp-02.pl:15
#, c-format
-msgid "/File/_Open"
-msgstr "/ไฟล์/_เปิด"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
+msgid ""
+"PowerPack is MandrakeSoft's premier Linux desktop product. In addition to "
+"being the easiest and the most user-friendly Linux distribution, PowerPack "
+"includes thousands of applications - everything from the most popular to the "
+"most technical."
+msgstr ""
-#: ../../any.pm:1
+#: share/advertising/pwp-04.pl:13
#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Hungary"
-msgstr "อังการี"
+msgid ""
+"In the Mandrake Linux menu you will find easy-to-use applications for all of "
+"your tasks:"
+msgstr ""
-#: ../../lang.pm:1
+#: share/advertising/pwp-04.pl:16
#, c-format
-msgid "New Zealand"
+msgid ""
+"\t- Take charge of your personal data with the integrated personal "
+"information suites <b>Kontact</b> and <b>Evolution</b>"
msgstr ""
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Color configuration"
-msgstr "การคอนฟิก"
+#: share/advertising/pwp-04.pl:17
+#, c-format
+msgid "\t- Browse the Web with <b>Mozilla</b> and <b>Konqueror</b>"
+msgstr ""
-#: ../../security/level.pm:1
+#: share/advertising/pwp-04.pl:19
#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
+msgid "\t- Listen to audio CDs and music files with KsCD and <b>Totem</b>"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: share/advertising/pwp-05.pl:13 share/advertising/pwp-06.pl:13
#, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "คุณมีเม้าส์ชนิดใด"
+msgid "<b>Development tools</b>"
+msgstr "พัฒนาซอฟท์แวร์ (Development)"
-#: ../../lang.pm:1
+#: share/advertising/pwp-05.pl:15
#, c-format
-msgid "Netherlands Antilles"
+msgid ""
+"PowerPack includes everything needed for developing and creating your own "
+"software, including:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: share/advertising/pwp-06.pl:15
#, c-format
-msgid "Switching from ext2 to ext3"
+msgid "And of course the editors!"
msgstr ""
-#: ../../printer/data.pm:1
+#: share/advertising/pwp-06.pl:17
#, c-format
-msgid "LPRng"
+msgid ""
+"\t- <b>Xemacs</b>: another open source text editor and application "
+"development system"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: share/advertising/pwp-06.pl:18
#, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"\t- <b>Vim</b>: an advanced text editor with more features than standard Vi"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone.pm:21
#, c-format
msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+"GNU General Public License for more details.\n"
"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "ไม่มีเครื่องพิมพ์"
-
-#: ../../standalone/harddrake2:1
+#: standalone.pm:40
#, c-format
msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
+"Backup and Restore application\n"
+"\n"
+"--default : save default directories.\n"
+"--debug : show all debug messages.\n"
+"--show-conf : list of files or directories to backup.\n"
+"--config-info : explain configuration file options (for non-X "
+"users).\n"
+"--daemon : use daemon configuration. \n"
+"--help : show this message.\n"
+"--version : show version number.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone.pm:52
#, c-format
msgid ""
-"Backup quota exceeded!\n"
-"%d MB used vs %d MB allocated."
+"[--boot] [--splash]\n"
+"OPTIONS:\n"
+" --boot - enable to configure boot loader\n"
+" --splash - enable to configure boot theme\n"
+"default mode: offer to configure autologin feature"
msgstr ""
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ไม่พบการ์ด ISDN PCI กรุณาเลือกจากหน้าต่อไป"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "โปรดป้อนชื่อผู้ใช้"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Enable CD Boot?"
-
-#: ../../../move/move.pm:1
+#: standalone.pm:57
#, c-format
-msgid "Simply reboot"
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+" --help - print this help message.\n"
+" --report - program should be one of mandrake tools\n"
+" --incident - program should be one of mandrake tools"
msgstr ""
-#: ../../interactive/stdio.pm:1
+#: standalone.pm:63
#, c-format
-msgid " enter `void' for void entry"
+msgid ""
+"[--add]\n"
+" --add - \"add a network interface\" wizard\n"
+" --del - \"delete a network interface\" wizard\n"
+" --skip-wizard - manage connections\n"
+" --internet - configure internet\n"
+" --wizard - like --add"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone.pm:69
#, c-format
-msgid "Backups on unmountable media - Use Catalog to restore"
+msgid ""
+"\n"
+"Font Importation and monitoring application\n"
+"\n"
+"OPTIONS:\n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts : show all fonts that already exist from xls\n"
+"--install : accept any font file and any directry.\n"
+"--uninstall : uninstall any font or any directory of font.\n"
+"--replace : replace all font if already exist\n"
+"--application : 0 none application.\n"
+" : 1 all application available supported.\n"
+" : name_of_application like so for staroffice \n"
+" : and gs for ghostscript for only this one."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone.pm:84
#, c-format
-msgid "January"
-msgstr "มกราคม"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable : enable MTS\n"
+"--disable : disable MTS\n"
+"--start : start MTS\n"
+"--stop : stop MTS\n"
+"--adduser : add an existing system user to MTS (requires username)\n"
+"--deluser : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
+msgstr ""
-#: ../../security/l10n.pm:1
+#: standalone.pm:96
#, fuzzy, c-format
-msgid "Password history length"
-msgstr "รหัสผ่านนี้ง่ายต่อการเดา"
+msgid "[keyboard]"
+msgstr "คีย์บอร์ด"
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
+#: standalone.pm:97
+#, c-format
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone.pm:98
#, c-format
msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
msgstr ""
-#: ../../standalone/drakxtv:1
+#: standalone.pm:107
#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone.pm:108
#, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "ไม่มีพื้นที่สวอปเพียงพอกับการติดตั้ง โปรดเพิ่มเนื้อที่"
-
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Port"
-
-#: ../../security/help.pm:1
-#, fuzzy, c-format
-msgid "Allow/Forbid remote root login."
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid ""
+"[OPTION]...\n"
+" --no-confirmation don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+" --no-verify-rpm don't verify packages signatures\n"
+" --changelog-first display changelog before filelist in the "
+"description window\n"
+" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
-#: ../../help.pm:1
+#: standalone.pm:113
#, c-format
msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"%s\", which will let GNU/Linux know that the system clock and the\n"
-"hardware clock are in the same timezone. This is useful when the machine\n"
-"also hosts another operating system like Windows.\n"
-"\n"
-"The \"%s\" option will automatically regulate the clock by connecting to a\n"
-"remote time server on the Internet. For this feature to work, you must have\n"
-"a working Internet connection. It is best to choose a time server located\n"
-"near you. This option actually installs a time server that can used by\n"
-"other machines on your local network as well."
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone.pm:114
#, c-format
-msgid "Can't create log file!"
+msgid ""
+" [everything]\n"
+" XFdrake [--noauto] monitor\n"
+" XFdrake resolution"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakclock:1
+#: standalone.pm:128
#, c-format
-msgid "Which is your timezone?"
-msgstr "คุณใช้ย่านเวลาใด? "
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use .backupignore files"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid ""
+"\n"
+"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guinea"
-msgstr "ทั่วไป"
+#: standalone/XFdrake:87
+#, c-format
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "กรุณาออกไปและใช้ Ctrl-Alt-BackSpace"
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "ติดต่อเข้า Internet เรียบร้อย"
+#: standalone/XFdrake:91
+#, c-format
+msgid "You need to log out and back in again for changes to take effect"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakTermServ:71
#, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid "Useless without Terminal Server"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: standalone/drakTermServ:101 standalone/drakTermServ:108
#, c-format
-msgid "Japan (broadcast)"
+msgid "%s: %s requires a username...\n"
msgstr ""
-#: ../../help.pm:1
+#: standalone/drakTermServ:121
#, c-format
msgid ""
-"Monitor\n"
-"\n"
-" The installer will normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is incorrect, you can choose from\n"
-"this list the monitor you actually have connected to your computer."
+"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
+"0/1 for Local Config...\n"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakTermServ:128
#, c-format
-msgid "Mozambique"
+msgid "%s: %s requires hostname...\n"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Icon"
+#: standalone/drakTermServ:140
+#, fuzzy, c-format
+msgid "You must be root to read configuration file. \n"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-#: ../../../move/tree/mdk_totem:1
+#: standalone/drakTermServ:219 standalone/drakTermServ:488
+#: standalone/drakfont:572
#, c-format
-msgid "Kill those programs"
-msgstr ""
+msgid "OK"
+msgstr "OK"
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:235
#, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "Terminal Server Configuration"
+msgstr "การคอนฟิก Internet"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: standalone/drakTermServ:240
#, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 สี (8 บิต)"
+msgid "DrakTermServ"
+msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "Read-write"
+#: standalone/drakTermServ:264
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s\n"
-msgstr "ขนาด: %s\n"
+#: standalone/drakTermServ:270
+#, fuzzy, c-format
+msgid "Disable Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Hostname: "
-msgstr "ชื่อโฮสต์:"
+#: standalone/drakTermServ:278
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../standalone/drakperm:1
+#: standalone/drakTermServ:284
#, fuzzy, c-format
-msgid "Add a rule"
-msgstr "เพิ่ม 1 module"
+msgid "Stop Server"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakTermServ:292
#, c-format
-msgid "Chunk size %s\n"
-msgstr "ขนาดของ Chunk %s\n"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
-#: ../advertising/02-community.pl:1
+#: standalone/drakTermServ:296
#, c-format
-msgid "Build the future of Linux!"
+msgid "Net Boot Images"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:302
#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Add/Del Users"
+msgstr "เพิ่มผู้ใช้"
-#: ../../network/tools.pm:1
+#: standalone/drakTermServ:306
#, fuzzy, c-format
-msgid "Floppy access error, unable to mount device %s"
-msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
+msgid "Add/Del Clients"
+msgstr "DHCP Client"
-#: ../../standalone.pm:1
+#: standalone/drakTermServ:317 standalone/drakbug:54
#, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
+msgid "First Time Wizard"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: standalone/drakTermServ:342
+#, c-format
+msgid ""
+"\n"
+" This wizard routine will:\n"
+" \t1) Ask you to select either 'thin' or 'fat' clients.\n"
+"\t2) Setup dhcp.\n"
+"\t\n"
+"After doing these steps, the wizard will:\n"
+"\t\n"
+" a) Make all "
+"nbis. \n"
+" b) Activate the "
+"server. \n"
+" c) Start the "
+"server. \n"
+" d) Synchronize the shadow files so that all users, including root, \n"
+" are added to the shadow$$CLIENT$$ "
+"file. \n"
+" e) Ask you to make a boot floppy.\n"
+" f) If it's thin clients, ask if you want to restart KDM.\n"
+msgstr ""
+
+#: standalone/drakTermServ:387
#, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "LAN connection"
+msgid "Cancel Wizard"
+msgstr "Wizard"
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:399
#, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
+msgid "Please save dhcpd config!"
msgstr ""
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "ผิดพลาด"
+#: standalone/drakTermServ:427
+#, c-format
+msgid ""
+"Please select client type.\n"
+" 'Thin' clients run everything off the server's CPU/RAM, using the client "
+"display.\n"
+" 'Fat' clients use their own CPU/RAM but the server's filesystem."
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: standalone/drakTermServ:433
#, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "cable connection"
+msgid "Allow thin clients."
+msgstr "DHCP Client"
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:441
#, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Creating net boot images for all kernels"
msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
+#: standalone/drakTermServ:442 standalone/drakTermServ:725
+#: standalone/drakTermServ:741
#, c-format
-msgid "/_Report Bug"
-msgstr "/_แจ้ง Bug"
+msgid "This will take a few minutes."
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakTermServ:446 standalone/drakTermServ:466
#, fuzzy, c-format
-msgid "Dominica"
-msgstr "โดเมน NIS"
+msgid "Done!"
+msgstr "ทำเรียบร้อยแล้ว"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakTermServ:452
#, c-format
-msgid "Resize"
-msgstr "เปลี่ยนขนาด"
+msgid "Syncing server user list with client list, including root."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: standalone/drakTermServ:472
#, c-format
-msgid "Resolution: %s\n"
-msgstr "ความละเอียดของภาพ %s\n"
+msgid ""
+"In order to enable changes made for thin clients, the display manager must "
+"be restarted. Restart now?"
+msgstr ""
-#: ../../install2.pm:1
+#: standalone/drakTermServ:507
#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
+msgid "drakTermServ Overview"
msgstr ""
-#: ../../help.pm:1
+#: standalone/drakTermServ:508
#, c-format
msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
+" - Create Etherboot Enabled Boot Images:\n"
+" \tTo boot a kernel via etherboot, a special kernel/initrd image must "
+"be created.\n"
+" \tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical \n"
+" \tinterface to help manage/customize these images. To create the "
+"file \n"
+" \t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+" \tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: standalone/drakTermServ:514
#, c-format
-msgid "The following packages are going to be removed"
-msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
+msgid ""
+" - Maintain /etc/dhcpd.conf:\n"
+" \tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP \n"
+" \taddress and net boot images to the machine. drakTermServ helps "
+"create/remove \n"
+" \tthese entries.\n"
+"\t\t\t\n"
+" \t(PCI cards may omit the image - etherboot will request the correct "
+"image. \n"
+"\t\t\tYou should also consider that when etherboot looks for the images, it "
+"expects \n"
+"\t\t\tnames like boot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+" \tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
+msgstr ""
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: standalone/drakTermServ:532
#, c-format
-msgid "Connect to the Internet"
-msgstr "ต่อเข้า Internet "
+msgid ""
+" While you can use a pool of IP addresses, rather than setup a "
+"specific entry for\n"
+" a client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+" of client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+" Note: The '#type' entry is only used by drakTermServ. Clients can "
+"either be 'thin'\n"
+" or 'fat'. Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+" most software on the client machine. A special inittab, %s is\n"
+" written for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+" modified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+" using xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+" subnet.\n"
+"\t\t\t\n"
+" Note: The '#hdw_config' entry is also only used by drakTermServ. "
+"Clients can either \n"
+" be 'true' or 'false'. 'true' enables root login at the client "
+"machine and allows local \n"
+" hardware configuration of sound, mouse, and X, using the 'drak' "
+"tools. This is enabled \n"
+" by creating separate config files associated with the client's IP "
+"address and creating \n"
+" read/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+" with the configuration, you can remove root login privileges from "
+"the client.\n"
+"\t\t\t\n"
+" Note: You must stop/start the server after adding or changing "
+"clients."
+msgstr ""
-#: ../../install_interactive.pm:1
+#: standalone/drakTermServ:552
#, c-format
-msgid "Use existing partitions"
-msgstr "ใช้พาร์ติชั่นที่มีอยู่"
+msgid ""
+" - Maintain /etc/exports:\n"
+" \tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+" \tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+" \tdiskless clients.\n"
+"\n"
+" \tA typical exports entry for clusternfs is:\n"
+" \t\t\n"
+" \t/\t\t\t\t\t(ro,all_squash)\n"
+" \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+" \tWith SUBNET/MASK being defined for your network."
+msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakTermServ:564
#, c-format
-msgid "Canadian (Quebec)"
-msgstr "คานาดา (ควิเบค)"
+msgid ""
+" - Maintain %s:\n"
+" \tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+" \t/etc/shadow needs to be duplicated in %s. drakTermServ\n"
+" \thelps in this respect by adding or removing system users from this "
+"file."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: standalone/drakTermServ:568
#, c-format
-msgid "Mouse device: %s\n"
-msgstr "ดีไวซ์ของเม้าส์: %s\n"
+msgid ""
+" - Per client %s:\n"
+" \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+" \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+" \tdrakTermServ will help create these files."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: standalone/drakTermServ:573
#, c-format
-msgid "Reselect correct fonts"
+msgid ""
+" - Per client system configuration files:\n"
+" \tThrough clusternfs, each diskless client can have its own unique "
+"configuration files\n"
+" \ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+" \tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+" \t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+" Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+" server on each client machine that has this feature enabled. Local "
+"configuration can be\n"
+" turned back off, retaining the configuration files, once the client "
+"machine is configured."
msgstr ""
-#: ../../help.pm:1
+#: standalone/drakTermServ:582
#, c-format
msgid ""
-"Options\n"
+" - /etc/xinetd.d/tftp:\n"
+" \tdrakTermServ will configure this file to work in conjunction with "
+"the images created\n"
+" \tby mkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to \n"
+" \teach diskless client.\n"
"\n"
-" Here you can choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"%s\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
+" \tA typical tftp configuration file looks like:\n"
+" \t\t\n"
+" \tservice tftp\n"
+"\t\t\t{\n"
+" disable = no\n"
+" socket_type = dgram\n"
+" protocol = udp\n"
+" wait = yes\n"
+" user = root\n"
+" server = /usr/sbin/in.tftpd\n"
+" server_args = -s /var/lib/tftpboot\n"
+" \t}\n"
+" \t\t\n"
+" \tThe changes here from the default installation are changing the "
+"disable flag to\n"
+" \t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+" \tputs its images."
msgstr ""
-#: ../advertising/13-mdkexpert_corporate.pl:1
-#, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "แบบผู้เชี่ยวชาญ (Expert)"
-
-#: ../../standalone.pm:1
+#: standalone/drakTermServ:603
#, c-format
msgid ""
-" [everything]\n"
-" XFdrake [--noauto] monitor\n"
-" XFdrake resolution"
+" - Create etherboot floppies/CDs:\n"
+" \tThe diskless client machines need either ROM images on the NIC, or "
+"a boot floppy\n"
+" \tor CD to initate the boot sequence. drakTermServ will help "
+"generate these\n"
+" \timages, based on the NIC in the client machine.\n"
+" \t\t\n"
+" \tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+" \t\t\n"
+" \tcat /usr/lib/etherboot/floppyload.bin \\\n"
+" \t\t/usr/share/etherboot/start16.bin \\\t\t\t\n"
+" \t\t/usr/lib/etherboot/zimg/3c509.zimg > /dev/fd0"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Write protection"
-msgstr "ใช้ auto detection"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "You've not selected any font"
-msgstr "ลบคิว"
-
-#: ../../steps.pm:1
+#: standalone/drakTermServ:638
#, c-format
-msgid "Language"
-msgstr "เลือกภาษาที่คุณใช้"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Boot Floppy"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakTermServ:640
#, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "การเปลี่ยนชนิดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
+msgid "Boot ISO"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: standalone/drakTermServ:642
#, fuzzy, c-format
-msgid "ISDN adapters"
-msgstr "Internal ISDN card"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d วินาที"
+msgid "PXE Image"
+msgstr "Image"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: standalone/drakTermServ:723
#, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "
+msgid "Build Whole Kernel -->"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:730
#, c-format
-msgid "A valid URI must be entered!"
+msgid "No kernel selected!"
msgstr ""
-#: ../../network/isdn.pm:1
+#: standalone/drakTermServ:733
#, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+msgid "Build Single NIC -->"
msgstr ""
-#: ../../standalone/drakgw:1
+#: standalone/drakTermServ:737
+#, fuzzy, c-format
+msgid "No NIC selected!"
+msgstr "ไม่เชื่อมต่อ"
+
+#: standalone/drakTermServ:740
#, c-format
-msgid "Re-configure interface and DHCP server"
+msgid "Build All Kernels -->"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: standalone/drakTermServ:747
#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "<-- Delete"
+msgstr "ลบ"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:754
#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
-
-#: ../../help.pm:1 ../../install_interactive.pm:1
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "กำลังพาร์ติชั่น Custom disk"
+msgid "Delete All NBIs"
+msgstr "เลือกไฟล์"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:841
#, c-format
-msgid "Enter Printer Name and Comments"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:846
#, fuzzy, c-format
-msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+msgid "Add User -->"
+msgstr "เพิ่มผู้ใช้"
-#: ../../network/modem.pm:1
+#: standalone/drakTermServ:852
#, c-format
-msgid "You don't have any winmodem"
+msgid "<-- Del User"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakTermServ:888
#, fuzzy, c-format
msgid "type: %s"
msgstr "ประเภท: "
-#: ../../keyboard.pm:1
+#: standalone/drakTermServ:892
#, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "สโลวาเกีย (QWERTY)"
+msgid "local config: %s"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
+#: standalone/drakTermServ:922
+#, fuzzy, c-format
msgid ""
-"This should be a comma-separated list of local users or email addresses that "
-"you want the backup results sent to. You will need a functioning mail "
-"transfer agent setup on your system."
+"Allow local hardware\n"
+"configuration."
+msgstr "Boot Style Configuration"
+
+#: standalone/drakTermServ:931
+#, c-format
+msgid "No net boot images created!"
msgstr ""
-#: ../../standalone/draksound:1
+#: standalone/drakTermServ:949
#, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "ไม่เชื่อมต่อ"
+msgid "Thin Client"
+msgstr "DHCP Client"
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
-#, c-format
-msgid "Mouse Port"
-msgstr "พอร์ตของเม้าส์"
+#: standalone/drakTermServ:953
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP Client"
-#: ../../security/l10n.pm:1
+#: standalone/drakTermServ:954
#, c-format
-msgid "Check for unsecured accounts"
+msgid "Add Client -->"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
-msgstr ""
+#: standalone/drakTermServ:968
+#, fuzzy, c-format
+msgid "type: fat"
+msgstr "ประเภท: "
-#: ../../standalone/logdrake:1
+#: standalone/drakTermServ:969
#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "type: thin"
+msgstr "ประเภท: "
-#: ../../lang.pm:1
+#: standalone/drakTermServ:976
#, fuzzy, c-format
-msgid "Uganda"
-msgstr "Update"
+msgid "local config: false"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/drakfont:1
+#: standalone/drakTermServ:977
+#, fuzzy, c-format
+msgid "local config: true"
+msgstr "คอนฟิกใหม่"
+
+#: standalone/drakTermServ:985
+#, fuzzy, c-format
+msgid "<-- Edit Client"
+msgstr "DHCP Client"
+
+#: standalone/drakTermServ:1011
#, c-format
-msgid "%s fonts conversion"
+msgid "Disable Local Config"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/drakTermServ:1018
#, fuzzy, c-format
-msgid "the type of bus on which the mouse is connected"
-msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
+msgid "Delete Client"
+msgstr "DHCP Client"
-#: ../../help.pm:1
+#: standalone/drakTermServ:1027
+#, fuzzy, c-format
+msgid "dhcpd Config..."
+msgstr "กำลังทำการคอนฟิก"
+
+#: standalone/drakTermServ:1040
#, c-format
msgid ""
-"As a review, DrakX will present a summary of information it has about your\n"
-"system. Depending on your installed hardware, you may have some or all of\n"
-"the following entries. Each entry is made up of the configuration item to\n"
-"be configured, followed by a quick summary of the current configuration.\n"
-"Click on the corresponding \"%s\" button to change that.\n"
-"\n"
-" * \"%s\": check the current keyboard map configuration and change that if\n"
-"necessary.\n"
-"\n"
-" * \"%s\": check the current country selection. If you are not in this\n"
-"country, click on the \"%s\" button and choose another one. If your country\n"
-"is not in the first list shown, click the \"%s\" button to get the complete\n"
-"country list.\n"
-"\n"
-" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
-"you have chosen. You can click on the \"%s\" button here if this is not\n"
-"correct.\n"
-"\n"
-" * \"%s\": check the current mouse configuration and click on the button to\n"
-"change it if necessary.\n"
-"\n"
-" * \"%s\": clicking on the \"%s\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"%s\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"%s\": by default, DrakX configures your graphical interface in\n"
-"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
-"\"%s\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
-"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
-"configure it manually.\n"
-"\n"
-" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
-"here. You can click on \"%s\" to change the parameters associated with the\n"
-"card.\n"
-"\n"
-" * \"%s\": If you want to configure your Internet or local network access\n"
-"now.\n"
-"\n"
-" * \"%s\": this entry allows you to redefine the security level as set in a\n"
-"previous step ().\n"
-"\n"
-" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
-"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
-"the corresponding section of the ``Starter Guide'' for details about\n"
-"firewall settings.\n"
-"\n"
-" * \"%s\": if you wish to change your bootloader configuration, click that\n"
-"button. This should be reserved to advanced users.\n"
-"\n"
-" * \"%s\": here you'll be able to fine control which services will be run\n"
-"on your machine. If you plan to use this machine as a server it's a good\n"
-"idea to review this setup."
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakTermServ:1084
#, c-format
-msgid "Comoros"
+msgid "Subnet:"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "May"
-msgstr "พฤษภาคม"
-
-#: ../../standalone/drakboot:1
+#: standalone/drakTermServ:1091
#, fuzzy, c-format
-msgid "Yaboot mode"
-msgstr "Boot mode"
+msgid "Netmask:"
+msgstr "เน็ตมาสก์"
-#: ../../mouse.pm:1
+#: standalone/drakTermServ:1098
#, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"
+msgid "Routers:"
+msgstr ""
-#: ../../standalone/drakxtv:1
+#: standalone/drakTermServ:1105
#, c-format
-msgid "USA (cable)"
+msgid "Subnet Mask:"
msgstr ""
-#: ../../standalone/drakboot:1
+#: standalone/drakTermServ:1112
#, c-format
-msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+msgid "Broadcast Address:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:1119
#, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "คุณมีเม้าส์ชนิดใด"
+msgid "Domain Name:"
+msgstr "ชื่อโดเมน"
-#: ../../standalone/drakbug:1
+#: standalone/drakTermServ:1127
#, fuzzy, c-format
-msgid "Software Manager"
-msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+msgid "Name Servers:"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../interactive/stdio.pm:1
+#: standalone/drakTermServ:1138
#, c-format
-msgid "Re-submit"
+msgid "IP Range Start:"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:1139
#, c-format
-msgid "CD in place - continue."
+msgid "IP Range End:"
msgstr ""
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakTermServ:1191
#, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Network interface"
+msgid "dhcpd Server Configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../keyboard.pm:1
+#: standalone/drakTermServ:1192
#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ลิธัวเนีย \"โฟเนติค\" QWERTY"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakTermServ:1195
#, c-format
-msgid "Net Boot Images"
+msgid "Dynamic IP Address Pool:"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/drakTermServ:1208
#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Write Config"
+msgstr "คอนฟิกใหม่"
-#: ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
-msgstr ""
+#: standalone/drakTermServ:1326
+#, fuzzy, c-format
+msgid "Please insert floppy disk:"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
-#: ../../../move/move.pm:1
+#: standalone/drakTermServ:1330
#, c-format
-msgid "Detect again USB key"
+msgid "Couldn't access the floppy!"
msgstr ""
-#: ../../services.pm:1
+#: standalone/drakTermServ:1332
#, c-format
-msgid "Services and deamons"
+msgid "Floppy can be removed now"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:1335
#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "ชื่อโฮสต์รีโมท"
+msgid "No floppy drive available!"
+msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"
-#: ../../fsedit.pm:1
+#: standalone/drakTermServ:1340
#, c-format
-msgid "with /usr"
+msgid "PXE image is %s/%s"
msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:1342
#, fuzzy, c-format
-msgid "Network"
-msgstr "Network interface"
+msgid "Error writing %s/%s"
+msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:1351
#, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "Etherboot ISO image is %s"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "This password is too simple"
-msgstr "รหัสผ่านนี้ง่ายต่อการเดา"
-
-#: ../../security/l10n.pm:1
-#, fuzzy, c-format
-msgid "Chkconfig obey msec rules"
-msgstr "ปรับแต่งการบริการต่างๆ"
-
-#: ../../keyboard.pm:1
+#: standalone/drakTermServ:1353
#, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "สโลวาเกีย (QWERTZ)"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
-#: ../advertising/06-development.pl:1
+#: standalone/drakTermServ:1372
#, c-format
-msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
+msgid "Need to create /etc/dhcpd.conf first!"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No devices found"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakTermServ:1533
#, c-format
-msgid "Truly minimal install (especially no urpmi)"
+msgid "%s passwd bad in Terminal Server - rewriting...\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:1551
#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "ชื่อผู้ใช้"
+msgid "%s is not a user..\n"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakauth:1 ../../standalone/drakconnect:1
-#: ../../standalone/logdrake:1
+#: standalone/drakTermServ:1552
#, c-format
-msgid "Authentication"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+msgid "%s is already a Terminal Server user\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:1554
#, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgid "Addition of %s to Terminal Server failed!\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
-
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakTermServ:1556
#, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+msgid "%s added to Terminal Server\n"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
-
-#: ../../lang.pm:1
+#: standalone/drakTermServ:1608
#, fuzzy, c-format
-msgid "Algeria"
-msgstr "พอร์ตอนุกรม"
+msgid "Deleted %s...\n"
+msgstr "ค้นพบ %s"
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:1610 standalone/drakTermServ:1687
#, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "เรียกคืนจากไฟล์"
+msgid "%s not found...\n"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:1632 standalone/drakTermServ:1633
+#: standalone/drakTermServ:1634
#, c-format
-msgid "Use tar and bzip2 (rather than tar and gzip)"
+msgid "%s already in use\n"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-size"
+#: standalone/drakTermServ:1658
+#, fuzzy, c-format
+msgid "Can't open %s!"
+msgstr "Adapter %s: %s"
-#: ../../help.pm:1
+#: standalone/drakTermServ:1715
#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then asked to choose the server that best\n"
-"suits your needs."
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakTermServ:1872
#, c-format
-msgid "\tBackups use tar and gzip\n"
+msgid "Configuration changed - restart clusternfs/dhcpd?"
msgstr ""
-#: ../../standalone/printerdrake:1
+#: standalone/drakautoinst:37
#, fuzzy, c-format
-msgid "Set as default"
-msgstr "default"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "2 MB"
-msgstr "2 MB"
-
-#: ../../printer/main.pm:1 ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Configured on this machine"
-msgstr "คอนฟิกเม้าส์"
+msgid "Error!"
+msgstr "ผิดพลาด"
-#: ../../keyboard.pm:1
+#: standalone/drakautoinst:38
#, c-format
-msgid "Both Control keys simultaneously"
+msgid "I can't find needed image file `%s'."
msgstr ""
-#: ../../standalone/drakhelp:1
-#, c-format
-msgid " --help - display this help \n"
-msgstr ""
+#: standalone/drakautoinst:40
+#, fuzzy, c-format
+msgid "Auto Install Configurator"
+msgstr "การคอนฟิกหลังการติดตั้ง"
-#: ../../standalone.pm:1
+#: standalone/drakautoinst:41
#, c-format
msgid ""
-"[OPTION]...\n"
-" --no-confirmation don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-" --no-verify-rpm don't verify packages signatures\n"
-" --changelog-first display changelog before filelist in the "
-"description window\n"
-" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found"
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Press ok to continue."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakautoinst:59
#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "replay"
+msgstr "เรียกอีกครั้ง"
-#: ../../standalone/drakgw:1
+#: standalone/drakautoinst:59 standalone/drakautoinst:68
#, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (using module %s)"
+msgid "manual"
+msgstr ""
-#: ../../standalone/draksplash:1
+#: standalone/drakautoinst:63
#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "กำลังตรวจสอบอุปกรณ์..."
+msgid "Automatic Steps Configuration"
+msgstr "Boot Style Configuration"
-#: ../../network/network.pm:1
+#: standalone/drakautoinst:64
#, c-format
msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
msgstr ""
-#: ../../standalone/draksec:1
+#: standalone/drakautoinst:76 standalone/drakautoinst:77
#, fuzzy, c-format
-msgid "ignore"
-msgstr "ไม่มี"
+msgid "Creating auto install floppy"
+msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
-#: ../../security/help.pm:1
+#: standalone/drakautoinst:141
#, c-format
msgid ""
-"Allow/Forbid X connections:\n"
"\n"
-"- ALL (all connections are allowed),\n"
-"\n"
-"- LOCAL (only connection from local machine),\n"
+"Welcome.\n"
"\n"
-"- NONE (no connection)."
-msgstr ""
-
-#: ../../printer/main.pm:1
-#, c-format
-msgid ", multi-function device on parallel port #%s"
+"The parameters of the auto-install are available in the sections on the left"
msgstr ""
-#: ../../mouse.pm:1
+#: standalone/drakautoinst:235 standalone/drakgw:583 standalone/drakvpn:898
+#: standalone/scannerdrake:367
#, c-format
-msgid "serial"
-msgstr "พอร์ตอนุกรม"
+msgid "Congratulations!"
+msgstr "ขอแสดงความยินดี"
-#: ../../harddrake/data.pm:1
+#: standalone/drakautoinst:236
#, c-format
-msgid "DVD-ROM"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "จอร์เจีย (เลย์เอ้าท์แบบละติน)"
-
-#: ../advertising/09-mdksecure.pl:1
-#, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
-msgstr ""
+#: standalone/drakautoinst:272
+#, fuzzy, c-format
+msgid "Auto Install"
+msgstr "ติดตั้ง"
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
-msgstr ""
+#: standalone/drakautoinst:341
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "เพิ่มผู้ใช้"
-#: ../../lang.pm:1
+#: standalone/drakautoinst:348
#, fuzzy, c-format
-msgid "Kenya"
-msgstr "คีย์บอร์ด"
+msgid "Remove the last item"
+msgstr "ฟอร์แมต loopback file %s"
-#: ../../diskdrake/hd_gtk.pm:1
+#: standalone/drakbackup:87
#, c-format
-msgid "Use ``Unmount'' first"
-msgstr "ใช้ ``Unmount'' ก่อน"
+msgid "hd"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:87
#, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+msgid "tape"
+msgstr "ประเภท"
-#: ../../any.pm:1
+#: standalone/drakbackup:158
#, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
+msgid "No devices found"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "first step creation"
-msgstr "สร้าง boot disk"
+#: standalone/drakbackup:196
+#, c-format
+msgid ""
+"Expect is an extension to the Tcl scripting language that allows interactive "
+"sessions without user intervention."
+msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakbackup:197
#, c-format
-msgid "Both Shift keys simultaneously"
+msgid "Store the password for this system in drakbackup configuration."
msgstr ""
-#: ../../standalone/drakhelp:1
+#: standalone/drakbackup:198
#, c-format
msgid ""
-" --id <id_label> - load the html help page which refers to id_label\n"
+"For a multisession CD, only the first session will erase the cdrw. Otherwise "
+"the cdrw is erased before each backup."
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "เลือกกราฟฟิคการ์ด"
-
-#: ../../security/help.pm:1
+#: standalone/drakbackup:199
#, c-format
-msgid "Accept/Refuse bogus IPv4 error messages."
+msgid ""
+"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -"
+"scanbus' would also show you the device number."
msgstr ""
-#: ../../printer/data.pm:1
+#: standalone/drakbackup:200
#, c-format
-msgid "LPRng - LPR New Generation"
+msgid ""
+"This option will save files that have changed. Exact behavior depends on "
+"whether incremental or differential mode is used."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-
-#: ../../standalone/logdrake:1
+#: standalone/drakbackup:201
#, c-format
-msgid "Save as.."
-msgstr "บันทึกแฟ้มเป็น"
+msgid ""
+"Incremental backups only save files that have changed or are new since the "
+"last backup."
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbackup:202
#, c-format
-msgid "Korea (North)"
+msgid ""
+"Differential backups only save files that have changed or are new since the "
+"original 'base' backup."
msgstr ""
-#: ../../standalone/drakconnect:1
+#: standalone/drakbackup:203
#, c-format
msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+"This should be a local user or email addresse that you want the backup "
+"results sent to. You will need to define a functioning mail server."
msgstr ""
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "การคอนฟิก"
-
-#: ../../any.pm:1 ../../security/l10n.pm:1
+#: standalone/drakbackup:204
#, c-format
-msgid "Autologin"
-msgstr "Autologin"
+msgid ""
+"Files or wildcards listed in a .backupignore file at the top of a directory "
+"tree will not be backed up."
+msgstr ""
-#: ../../any.pm:1
+#: standalone/drakbackup:205
#, c-format
-msgid "Domain Admin Password"
+msgid ""
+"For backups to other media, files are still created on the hard drive, then "
+"moved to the other media. Enabling this option will remove the hard drive "
+"tar files after the backup."
msgstr ""
-#: ../advertising/05-desktop.pl:1
+#: standalone/drakbackup:206
#, c-format
msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"Some protocols, like rsync, may be configured at the server end. Rather "
+"than using a directory path, you would use the 'module' name for the service "
+"path."
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "การคอนฟิกเครื่องพิมพ์"
-
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:207
#, c-format
msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+"Custom allows you to specify your own day and time. The other options use "
+"run-parts in /etc/crontab."
msgstr ""
-#: ../../common.pm:1
+#: standalone/drakbackup:604
#, c-format
-msgid "MB"
-msgstr "MB"
+msgid "Interval cron not available as non-root"
+msgstr ""
-#: ../../security/help.pm:1
+#: standalone/drakbackup:715 standalone/logdrake:415
#, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "\"%s\" neither is a valid email nor is an existing local user!"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbackup:719 standalone/logdrake:420
#, c-format
-msgid "Virgin Islands (British)"
+msgid ""
+"\"%s\" is a local user, but you did not select a local smtp, so you must use "
+"a complete email address!"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Bermuda"
-msgstr "เยอรมัน"
+#: standalone/drakbackup:728
+#, c-format
+msgid "Valid user list changed, rewriting config file."
+msgstr ""
-#: ../../standalone/drakfont:1
+#: standalone/drakbackup:730
#, c-format
-msgid "click here if you are sure."
+msgid "Old user list:\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:732
#, c-format
-msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+msgid "New user list:\n"
msgstr ""
-#: ../../help.pm:1
+#: standalone/drakbackup:779
#, c-format
msgid ""
-"Listed here are the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+" DrakBackup Report \n"
+msgstr ""
+
+#: standalone/drakbackup:780
+#, c-format
+msgid ""
"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+" DrakBackup Daemon Report\n"
+msgstr ""
+
+#: standalone/drakbackup:786
+#, c-format
+msgid ""
"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+" DrakBackup Report Details\n"
"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
msgstr ""
-#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: standalone/drakbackup:810 standalone/drakbackup:883
+#: standalone/drakbackup:939
#, fuzzy, c-format
-msgid "Remove"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Total progress"
+msgstr "กำลังตรวจสอบพอร์ต"
-#: ../../lang.pm:1
+#: standalone/drakbackup:865
#, c-format
-msgid "Lesotho"
+msgid ""
+"%s exists, delete?\n"
+"\n"
+"If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
msgstr ""
-#: ../../ugtk2.pm:1
+#: standalone/drakbackup:874
#, c-format
-msgid "utopia 25"
+msgid "This may take a moment to generate the keys."
msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/drakbackup:881
+#, fuzzy, c-format
+msgid "Cannot spawn %s."
+msgstr "Adapter %s: %s"
+
+#: standalone/drakbackup:898
#, c-format
-msgid "Pipe job into a command"
+msgid "No password prompt on %s at port %s"
msgstr ""
-#: ../../../move/move.pm:1
+#: standalone/drakbackup:899
#, fuzzy, c-format
-msgid "Remove system config files"
-msgstr "ฟอร์แมต loopback file %s"
+msgid "Bad password on %s"
+msgstr "ไม่มีรหัสผ่าน"
-#: ../../lang.pm:1
+#: standalone/drakbackup:900
#, c-format
-msgid "Cote d'Ivoire"
+msgid "Permission denied transferring %s to %s"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/drakbackup:901
+#, fuzzy, c-format
+msgid "Can't find %s on %s"
+msgstr "Adapter %s: %s"
+
+#: standalone/drakbackup:904
#, c-format
-msgid "new dynamic device name generated by core kernel devfs"
+msgid "%s not responding"
msgstr ""
-#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/drakclock:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: standalone/drakbackup:908
#, c-format
-msgid "Yes"
-msgstr "ใช่"
+msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
+"\n"
+"ssh -i %s %s@%s\n"
+"\n"
+"without being prompted for a password."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: standalone/drakbackup:953
#, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Protocol ไหนที่คุณต้องการ"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "เรียกคืนจากไฟล์"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Estonia"
-msgstr "Estonian"
+msgid "WebDAV remote site already in sync!"
+msgstr ""
-#: ../../partition_table.pm:1
+#: standalone/drakbackup:957
#, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+msgid "WebDAV transfer failed!"
msgstr ""
-"คุณมีช่องว่างในตารางพาร์ติชั่น แต่โปรแกรมจะไม่ใช้งานช่องว่างนั้น\n"
-"การแก้ไขปัญหาสามารถทำได้โดยย้ายไพรมารีพาร์ติชั่น เพื่อให้ช่องว่าไปต่อท้ายพาร์ติชั่นแบบ extended"
-#: ../../standalone/scannerdrake:1
+#: standalone/drakbackup:978
#, c-format
-msgid "Choose the host on which the local scanners should be made available:"
+msgid "No CD-R/DVD-R in drive!"
msgstr ""
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Channel"
-msgstr "ยกเลิก"
+#: standalone/drakbackup:982
+#, c-format
+msgid "Does not appear to be recordable media!"
+msgstr ""
-#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: standalone/drakbackup:986
#, c-format
-msgid "Add"
-msgstr "เพิ่ม"
+msgid "Not erasable media!"
+msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
+#: standalone/drakbackup:1027
+#, c-format
+msgid "This may take a moment to erase the media."
+msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/keyboarddrake:1
+#: standalone/drakbackup:1103
#, c-format
-msgid "Keyboard"
-msgstr "คีย์บอร์ด"
+msgid "Permission problem accessing CD."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:1130
#, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
+msgid "No tape in %s!"
msgstr ""
-#: ../../network/network.pm:1
+#: standalone/drakbackup:1232
#, c-format
msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+"Backup quota exceeded!\n"
+"%d MB used vs %d MB allocated."
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "เลือกเครื่องมือที่คุณต้องการใช้"
-
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-
-#: ../../network/network.pm:1
+#: standalone/drakbackup:1251 standalone/drakbackup:1305
#, c-format
-msgid "Configuring network device %s"
-msgstr "กำลังคอนฟิกอุปกรณ์เน็ตเวิร์ก %s"
+msgid "Backup system files..."
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:1306 standalone/drakbackup:1368
#, fuzzy, c-format
-msgid "activated"
-msgstr "แอ็คทีฟ"
+msgid "Hard Disk Backup files..."
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../standalone/drakpxe:1
+#: standalone/drakbackup:1367
#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"
-
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Finding packages to upgrade..."
-msgstr "กำลังหาแพ็คเก็จที่จะทำการอัพเกรด"
+msgid "Backup User files..."
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount point: "
-msgstr "จุดเม้าท์: "
+#: standalone/drakbackup:1421
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../standalone/drakfont:1
+#: standalone/drakbackup:1422
#, c-format
-msgid "parse all fonts"
+msgid "Hard Disk Backup Progress..."
msgstr ""
-#: ../../security/help.pm:1
+#: standalone/drakbackup:1427
#, fuzzy, c-format
-msgid "Allow/Forbid direct root login."
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "No changes to backup!"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../security/help.pm:1
+#: standalone/drakbackup:1445 standalone/drakbackup:1469
#, c-format
-msgid " Accept/Refuse broadcasted icmp echo."
+msgid ""
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:1454
#, c-format
-msgid "With X"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: standalone/drakbackup:1455
#, c-format
-msgid "Multi-head configuration"
-msgstr "Multi-head configuration"
+msgid ""
+"Error during sending file via FTP. Please correct your FTP configuration."
+msgstr ""
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
+#: standalone/drakbackup:1457
+#, c-format
+msgid "file list sent by FTP: %s\n"
+msgstr ""
-#: ../../Xconfig/main.pm:1
+#: standalone/drakbackup:1474
#, c-format
msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
"\n"
-"%s"
-msgstr ""
-"เก็บการเปลี่ยนแปลง\n"
-"การปรับแต่งปัจจุบัณคือ:\n"
+"Drakbackup activities via CD:\n"
"\n"
-"%s"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "คุณไม่สามารถใช้ ReiserFS สำหรับพาร์ติชั่นที่น้อยกว่า 32MB ได้"
+msgstr ""
-#: ../../services.pm:1
+#: standalone/drakbackup:1479
#, c-format
msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: standalone/drakbackup:1488
#, c-format
-msgid "Domain name"
-msgstr "ชื่อโดเมน"
+msgid "Error sending mail. Your report mail was not sent."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:1489
#, fuzzy, c-format
-msgid "Sharing of local printers"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid " Error while sending mail. \n"
+msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
-#: ../../security/help.pm:1
+#: standalone/drakbackup:1518
#, c-format
-msgid "Enable/Disable libsafe if libsafe is found on the system."
+msgid "Can't create catalog!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Available printers"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:1639
#, c-format
-msgid "NO"
+msgid "Can't create log file!"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Empty"
-msgstr "ว่าง"
+#: standalone/drakbackup:1656 standalone/drakbackup:1667
+#: standalone/drakfont:584
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "เลือกกลุ่มแพ็คเก็จ"
-#: ../../standalone/draksplash:1
+#: standalone/drakbackup:1695
#, c-format
-msgid "text width"
+msgid "Select the files or directories and click on 'OK'"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:1723
#, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: standalone/drakbackup:1724
#, c-format
-msgid "The default lease (in seconds)"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
msgstr ""
-#: ../../network/netconnect.pm:1
+#: standalone/drakbackup:1725
#, fuzzy, c-format
-msgid ""
-"We are now going to configure the %s connection.\n"
-"\n"
-"\n"
-"Press \"%s\" to continue."
+msgid "Backup your System files. (/etc directory)"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: standalone/drakbackup:1726 standalone/drakbackup:1790
+#: standalone/drakbackup:1856
+#, c-format
+msgid "Use Incremental/Differential Backups (do not replace old backups)"
msgstr ""
-"\n"
-"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Interface %s"
+#: standalone/drakbackup:1728 standalone/drakbackup:1792
+#: standalone/drakbackup:1858
+#, c-format
+msgid "Use Incremental Backups"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:1728 standalone/drakbackup:1792
+#: standalone/drakbackup:1858
#, c-format
-msgid "With basic documentation (recommended!)"
+msgid "Use Differential Backups"
msgstr ""
-#: ../../mouse.pm:1
+#: standalone/drakbackup:1730
#, c-format
-msgid "1 button"
-msgstr "1 ปุ่ม"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:1731
#, c-format
msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
msgstr ""
-#: ../../Xconfig/main.pm:1
+#: standalone/drakbackup:1762
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+
+#: standalone/drakbackup:1789
#, c-format
-msgid "Test"
+msgid "Do not include the browser cache"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbackup:1844 standalone/drakfont:650
#, fuzzy, c-format
-msgid "Korea"
-msgstr "More"
+msgid "Remove Selected"
+msgstr "ลบคิว"
-#: ../../interactive/stdio.pm:1
+#: standalone/drakbackup:1891 standalone/drakbackup:1895
+#, c-format
+msgid "Under Devel ... please wait."
+msgstr ""
+
+#: standalone/drakbackup:1909
#, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
+msgid "Windows (FAT32)"
+msgstr "ลบ Windows(TM)"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:1942
#, fuzzy, c-format
-msgid "Raw printer"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Users"
+msgstr "ชื่อผู้ใช้"
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "official vendor name of the cpu"
-msgstr ""
+#: standalone/drakbackup:1961
+#, fuzzy, c-format
+msgid "Use network connection to backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakbackup:1963
#, c-format
-msgid "Useless without Terminal Server"
+msgid "Net Method:"
msgstr ""
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Vendor"
-msgstr "ยกเลิก"
-
-#: ../../standalone/drakgw:1
+#: standalone/drakbackup:1967
#, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
+msgid "Use Expect for SSH"
+msgstr ""
-#: ../../steps.pm:1
+#: standalone/drakbackup:1968
#, c-format
-msgid "Configure mouse"
-msgstr "คอนฟิกเม้าส์"
+msgid "Create/Transfer backup keys for SSH"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:1970
#, c-format
-msgid "Choose the mount points"
-msgstr "เลือกจุดเม้าท์"
+msgid "Transfer Now"
+msgstr ""
-#: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1
+#: standalone/drakbackup:1972
#, c-format
-msgid "OK"
-msgstr "OK"
+msgid "Other (not drakbackup) keys in place already"
+msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakbackup:1975
#, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"
+msgid "Host name or IP."
+msgstr "ชื่อโฮสต์:"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:1980
#, c-format
-msgid "Installing"
-msgstr "กำลังติดตั้ง"
+msgid "Directory (or module) to put the backup on this host."
+msgstr ""
-#: ../../mouse.pm:1
+#: standalone/drakbackup:1985
#, fuzzy, c-format
-msgid "Logitech MouseMan with Wheel emulation"
-msgstr "Logitech MouseMan"
+msgid "Login name"
+msgstr "ชื่อโดเมน"
+
+#: standalone/drakbackup:1992
+#, fuzzy, c-format
+msgid "Remember this password"
+msgstr "ไม่มีรหัสผ่าน"
-#: ../../any.pm:1
+#: standalone/drakbackup:2004
#, c-format
-msgid "Launch userdrake"
+msgid "Need hostname, username and password!"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:2106
+#, c-format
+msgid "Use CD-R/DVD-R to backup"
+msgstr ""
+
+#: standalone/drakbackup:2109
#, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "นี่เป็นการติดตั้งหรือการอัพเกรด"
+msgid "Choose your CD/DVD device"
+msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
-#: ../../help.pm:1
+#: standalone/drakbackup:2114
#, fuzzy, c-format
-msgid "ISDN card"
-msgstr "Internal ISDN card"
+msgid "Choose your CD/DVD media size"
+msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
-#: ../advertising/02-community.pl:1
-#, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+#: standalone/drakbackup:2121
+#, fuzzy, c-format
+msgid "Multisession CD"
+msgstr "Multimedia - เขียน CD "
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2123
#, c-format
-msgid "\t-Hard drive.\n"
+msgid "CDRW media"
msgstr ""
-#: ../../help.pm:1
+#: standalone/drakbackup:2128
+#, fuzzy, c-format
+msgid "Erase your RW media (1st Session)"
+msgstr "โปรดเลือกพาร์ติชั่น"
+
+#: standalone/drakbackup:2129
#, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"%s\": For the most part, this completely wipes out the old system. If\n"
-"you wish to change how your hard drives are partitioned, or change the file\n"
-"system, you should use this option. However, depending on your partitioning\n"
-"scheme, you can prevent some of your existing data from being over-written.\n"
-"\n"
-" * \"%s\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
+msgid " Erase Now "
msgstr ""
-#: ../../standalone/drakfont:1
+#: standalone/drakbackup:2136
#, c-format
-msgid ""
-"\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-" DUPONT Sebastien (original version)\n"
-" CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-" - pfm2afm: \n"
-"\t by Ken Borgendale:\n"
-"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
-" - type1inst:\n"
-"\t by James Macnicol: \n"
-"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-" - ttf2pt1: \n"
-"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
-" Convert ttf font files to afm and pfb fonts\n"
+msgid "DVD+RW media"
msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/drakbackup:2138
#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Remote CUPS server"
+msgid "DVD-R media"
+msgstr "อุปกรณ์"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2140
+#, fuzzy, c-format
+msgid "DVDRAM device"
+msgstr "อุปกรณ์"
+
+#: standalone/drakbackup:2145
#, c-format
msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+"Enter your CD Writer device name\n"
+" ex: 0,1,0"
msgstr ""
-#: ../../standalone/drakfont:1
-#, c-format
-msgid "here if no."
-msgstr ""
+#: standalone/drakbackup:2177
+#, fuzzy, c-format
+msgid "No CD device defined!"
+msgstr "เลือกไฟล์"
-#: ../../network/network.pm:1
+#: standalone/drakbackup:2227
#, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "ชื่อโฮสต์:"
+msgid "Use tape to backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../standalone/drakgw:1
+#: standalone/drakbackup:2230
#, c-format
-msgid "The maximum lease (in seconds)"
+msgid "Device name to use for backup"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
-#, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
+#: standalone/drakbackup:2237
+#, fuzzy, c-format
+msgid "Don't rewind tape after backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2243
+#, fuzzy, c-format
+msgid "Erase tape before backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: standalone/drakbackup:2249
+#, fuzzy, c-format
+msgid "Eject tape after the backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: standalone/drakbackup:2317
+#, fuzzy, c-format
+msgid "Enter the directory to save to:"
+msgstr "กรุณาทดสอบเม้าส์"
+
+#: standalone/drakbackup:2326
#, c-format
-msgid "Did it work properly?"
+msgid ""
+"Maximum size\n"
+" allowed for Drakbackup (MB)"
msgstr ""
-#: ../../fs.pm:1
+#: standalone/drakbackup:2399
#, c-format
-msgid "Mount the file system read-only."
+msgid "CD-R / DVD-R"
msgstr ""
-#: ../../security/level.pm:1
+#: standalone/drakbackup:2404
#, c-format
-msgid "Poor"
-msgstr "ต่ำกว่ามาตรฐาน"
+msgid "HardDrive / NFS"
+msgstr ""
-#: ../../security/l10n.pm:1
+#: standalone/drakbackup:2420 standalone/drakbackup:2425
+#: standalone/drakbackup:2430
#, c-format
-msgid "Report check result by mail"
+msgid "hourly"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbackup:2421 standalone/drakbackup:2426
+#: standalone/drakbackup:2430
#, c-format
-msgid "Grenada"
+msgid "daily"
msgstr ""
-#: ../../standalone/drakgw:1
+#: standalone/drakbackup:2422 standalone/drakbackup:2427
+#: standalone/drakbackup:2430
#, c-format
-msgid "The DHCP start range"
+msgid "weekly"
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakbackup:2423 standalone/drakbackup:2428
+#: standalone/drakbackup:2430
#, c-format
-msgid "Unsafe"
-msgstr "Unsafe"
+msgid "monthly"
+msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: standalone/drakbackup:2424 standalone/drakbackup:2429
+#: standalone/drakbackup:2430
#, fuzzy, c-format
-msgid "SSH server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "custom"
+msgstr "แบบปรับแก้ได้ (Customized) "
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:2435
#, c-format
-msgid ", %s sectors"
-msgstr ", %s เซ็กเตอร์"
+msgid "January"
+msgstr "มกราคม"
-#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/drakclock:1 ../../standalone/harddrake2:1
+#: standalone/drakbackup:2435
#, c-format
-msgid "No"
-msgstr "ไม่ต้อง"
+msgid "February"
+msgstr "กุมภาพันธ์"
-#: ../../lang.pm:1
+#: standalone/drakbackup:2435
#, c-format
-msgid "Guadeloupe"
-msgstr ""
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Kannada"
-msgstr "ปฎิทิน"
+msgid "March"
+msgstr "มีนาคม"
-#: ../../standalone/drakfont:1
+#: standalone/drakbackup:2436
#, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "April"
+msgstr "เมษายน"
-#: ../../standalone/keyboarddrake:1
+#: standalone/drakbackup:2436
#, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
-msgstr ""
+msgid "May"
+msgstr "พฤษภาคม"
-#: ../../Xconfig/monitor.pm:1
+#: standalone/drakbackup:2436
#, c-format
-msgid "Vertical refresh rate"
-msgstr "อัตราการรีเฟรชตามแนวตั้ง"
+msgid "June"
+msgstr "มิถุนายน"
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#: standalone/drakbackup:2436
#, c-format
-msgid "Entering step `%s'\n"
-msgstr "เข้าสู่ขั้นตอน `%s'\n"
-
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niger"
-msgstr "สูง"
+msgid "July"
+msgstr "กรกฎาคม"
-#: ../../mouse.pm:1
+#: standalone/drakbackup:2436
#, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid "August"
+msgstr "สิงหาคม"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "ความละเอียดของภาพ %s\n"
+#: standalone/drakbackup:2436
+#, c-format
+msgid "September"
+msgstr "กันยายน"
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:2437
#, c-format
-msgid "No printer"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "October"
+msgstr "ตุลาคม"
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "การคอนฟิก"
+#: standalone/drakbackup:2437
+#, c-format
+msgid "November"
+msgstr "พฤศจิกายน"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2437
#, c-format
-msgid "NetWare Printer Options"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์ในระบบเน็ตแวร์"
+msgid "December"
+msgstr "ธันวาคม"
-#: ../../standalone/draksplash:1
+#: standalone/drakbackup:2442
#, c-format
-msgid "%s BootSplash (%s) preview"
-msgstr ""
+msgid "Sunday"
+msgstr "อาทิตย์"
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2442
#, c-format
-msgid "February"
-msgstr "กุมภาพันธ์"
+msgid "Monday"
+msgstr "จันทร์"
-#: ../../standalone/drakfloppy:1
+#: standalone/drakbackup:2442
#, c-format
-msgid "General"
-msgstr "ทั่วไป"
+msgid "Tuesday"
+msgstr "อังคาร"
-#: ../../security/l10n.pm:1
+#: standalone/drakbackup:2443
#, c-format
-msgid "/etc/issue* exist"
-msgstr ""
+msgid "Wednesday"
+msgstr "พุธ"
-#: ../../steps.pm:1
+#: standalone/drakbackup:2443
#, c-format
-msgid "Add a user"
-msgstr "เพิ่มผู้ใช้"
+msgid "Thursday"
+msgstr "พฤหัสบดี"
-#: ../../standalone/drakconnect:1
+#: standalone/drakbackup:2443
#, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก (%d adapters)"
+msgid "Friday"
+msgstr "ศุกร์"
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2443
#, c-format
-msgid "April"
-msgstr "เมษายน"
+msgid "Saturday"
+msgstr "เสาร์"
-#: ../../standalone/drakconnect:1
+#: standalone/drakbackup:2478
#, fuzzy, c-format
-msgid "Deactivate now"
-msgstr "แอ็คทีฟ"
+msgid "Use daemon"
+msgstr "ชื่อผู้ใช้"
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, c-format
-msgid "Mandatory package %s is missing"
-msgstr ""
+#: standalone/drakbackup:2483
+#, fuzzy, c-format
+msgid "Please choose the time interval between each backup"
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
-#: ../../lang.pm:1
+#: standalone/drakbackup:2489
#, c-format
-msgid "Philippines"
+msgid "Custom setup/crontab entry:"
msgstr ""
-#: ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1
-#: ../../standalone/draksec:1 ../../standalone/mousedrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Ok"
-msgstr "ตกลง"
+#: standalone/drakbackup:2494
+#, fuzzy, c-format
+msgid "Minute"
+msgstr "1 นาที"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakbackup:2498
#, c-format
-msgid "drakTermServ Overview"
+msgid "Hour"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Print Queue Name"
-msgstr "ชื่อพรินต์คิว"
+#: standalone/drakbackup:2502
+#, fuzzy, c-format
+msgid "Day"
+msgstr "พฤษภาคม"
+
+#: standalone/drakbackup:2506
+#, fuzzy, c-format
+msgid "Month"
+msgstr "เม้าท์"
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:2510
+#, fuzzy, c-format
+msgid "Weekday"
+msgstr "พุธ"
+
+#: standalone/drakbackup:2516
+#, fuzzy, c-format
+msgid "Please choose the media for backup."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+
+#: standalone/drakbackup:2523
+#, fuzzy, c-format
+msgid "Please be sure that the cron daemon is included in your services."
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+
+#: standalone/drakbackup:2524
#, c-format
-msgid "Do you want to use aboot?"
-msgstr "คุณต้องการใช้ aboot หรือไม่"
+msgid "Note that currently all 'net' media also use the hard drive."
+msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakbackup:2571
#, c-format
-msgid "Belarusian"
-msgstr "Belarusian"
+msgid "Use tar and bzip2 (rather than tar and gzip)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2572
+#, fuzzy, c-format
+msgid "Use .backupignore files"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: standalone/drakbackup:2574
#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
+msgid "Send mail report after each backup to:"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:2580
#, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
+msgid "SMTP server for mail:"
+msgstr "ชื่อโฮสต์ของ SMB server"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2585
#, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Delete Hard Drive tar files after backup to other media."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2624
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"Please plug in and turn on all printers connected to this machine so that it/"
-"they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "What"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbackup:2629
#, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "เครื่องพิมพ์"
+msgid "Where"
+msgstr "Wheel"
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2634
#, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "กู้ตารางพาร์ติชั่น"
+msgid "When"
+msgstr "Wheel"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "IDE"
-msgstr "IDE"
+#: standalone/drakbackup:2639
+#, fuzzy, c-format
+msgid "More Options"
+msgstr "อ๊อปชั่นของโมดูล:"
+
+#: standalone/drakbackup:2651
+#, fuzzy, c-format
+msgid "Backup destination not configured..."
+msgstr "ไม่มีการคอนฟิกจอภาพ"
+
+#: standalone/drakbackup:2667 standalone/drakbackup:4731
+#, fuzzy, c-format
+msgid "Drakbackup Configuration"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-#: ../../fs.pm:1
+#: standalone/drakbackup:2684
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+
+#: standalone/drakbackup:2686
#, c-format
-msgid "mounting partition %s in directory %s failed"
+msgid "Hard Drive used to prepare backups for all media"
msgstr ""
-#: ../../standalone/drakboot:1
+#: standalone/drakbackup:2694
#, c-format
-msgid "Lilo screen"
+msgid "Across Network"
msgstr ""
-#: ../../bootloader.pm:1 ../../help.pm:1
+#: standalone/drakbackup:2702
#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO แบบ graphical menu"
+msgid "On CD-R"
+msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: standalone/drakbackup:2710
#, c-format
-msgid "Estimating"
-msgstr "การประเมิน"
+msgid "On Tape Device"
+msgstr ""
+
+#: standalone/drakbackup:2738
+#, fuzzy, c-format
+msgid "Please select media for backup..."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
-#: ../../install_steps_gtk.pm:1
+#: standalone/drakbackup:2760
#, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"
+msgid "Backup Users"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2761
#, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/วินโดวส์ 95/98/NT"
+msgid " (Default is all users)"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:2773
+#, fuzzy, c-format
+msgid "Please choose what you want to backup"
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+
+#: standalone/drakbackup:2774
+#, fuzzy, c-format
+msgid "Backup System"
+msgstr "เซ็ตอัพระบบไฟล์"
+
+#: standalone/drakbackup:2776
#, c-format
-msgid "Go on anyway?"
-msgstr "ทำงานต่อหรือไม่?"
+msgid "Select user manually"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakbackup:2805
#, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "กำลังหาแพ็คเก็จที่มีอยู่"
+msgid "Please select data to backup..."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2879
#, c-format
msgid ""
"\n"
-" DrakBackup Report \n"
+"Backup Sources: \n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2880
#, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"\n"
+"- System Files:\n"
msgstr ""
-#: ../../modules/interactive.pm:1
+#: standalone/drakbackup:2882
#, c-format
-msgid "Specify options"
-msgstr "ระบุอ๊อปชั่น"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbackup:2884
#, c-format
-msgid "Vanuatu"
+msgid ""
+"\n"
+"- Other Files:\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2886
#, c-format
-msgid "New user list:\n"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2887
#, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "\tLimit disk usage to %s MB\n"
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakbackup:2890
#, c-format
msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
"\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"- Delete hard drive tar files after backup.\n"
msgstr ""
-"บูตดิสก์แบบแก้ไขได้ตามความต้องการของผู้ใช้ จะช่วยให้คุณสามารถบูตระบบลีนุกซ์\n"
-"ไม่ต้องเข้าสู่กระบวนการของบูตโหลดเดอร์ตามปกติ ซึ่งจะเป็นประโยชน์มากหากคุณ\n"
-"ไม่ได้ติดตั้ง LILO ลงในระบบของคุณ หรือหาก LILO ถูกลบออกไปเนื่องจากมีการ\n"
-"ระบบปฏิบัติการแบบอื่นๆ หรือ LILO ไม่ทำงานกับการคอนฟิกฮาร์ดแวร์ แผ่นบูตดิสก์\n"
-"จะสามารถใช้กับอิมเมจกู้คืนระบบของแมนเดร็ก ซึ่งจะช่วยให้คุณสามารถทำการกู้\n"
-"คืนระบบจากความผิดพลาดได้ด้วย คุณต้องการจะสร้างแผ่นบูตหรือไม่?\n"
-"ถ้าใช่ กรุณาใส่แผ่น Diskette และกด \"OK\""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
+#: standalone/drakbackup:2894
+#, c-format
+msgid "NO"
+msgstr ""
-#: ../../security/help.pm:1
+#: standalone/drakbackup:2895
#, c-format
-msgid "Set the password history length to prevent password reuse."
+msgid "YES"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbackup:2896
#, c-format
-msgid "Norfolk Island"
+msgid ""
+"\n"
+"- Burn to CD"
+msgstr ""
+
+#: standalone/drakbackup:2897
+#, c-format
+msgid "RW"
msgstr ""
-#: ../../standalone/drakboot:1
+#: standalone/drakbackup:2898
#, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "เลือกชุดการติดตั้ง"
+msgid " on device: %s"
+msgstr "ดีไวซ์ของเม้าส์: %s\n"
-#: ../../fsedit.pm:1
+#: standalone/drakbackup:2899
#, c-format
-msgid "Nothing to do"
+msgid " (multi-session)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:2900
#, c-format
-msgid "Use for loopback"
-msgstr "ใช้สำหรับ loopback"
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: standalone/drakbackup:2901
#, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "\t\tErase=%s"
msgstr ""
-#: ../../standalone/printerdrake:1
+#: standalone/drakbackup:2904
#, c-format
-msgid "Apply filter"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
msgstr ""
-#: ../../network/adsl.pm:1
+#: standalone/drakbackup:2905
#, c-format
-msgid "use pppoe"
-msgstr "ใช้ pppoe"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:2906
#, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
+msgid ""
+"\n"
+"- Options:\n"
+msgstr "/Options/ทดลอง"
-#: ../../Xconfig/card.pm:1
+#: standalone/drakbackup:2907
#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgid "\tDo not include System Files\n"
+msgstr ""
-#: ../../help.pm:1 ../../interactive.pm:1
+#: standalone/drakbackup:2910
#, c-format
-msgid "Advanced"
-msgstr "Advanced"
+msgid "\tBackups use tar and bzip2\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:2912
#, c-format
-msgid "Transfer"
+msgid "\tBackups use tar and gzip\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakbackup:2915
#, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
+msgid "\tUse .backupignore files\n"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "Iranian"
+#: standalone/drakbackup:2916
+#, c-format
+msgid "\tSend mail to %s\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2917
#, fuzzy, c-format
-msgid "More Options"
-msgstr "อ๊อปชั่นของโมดูล:"
+msgid "\tUsing SMTP server %s\n"
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2919
#, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
+msgid ""
+"\n"
+"- Daemon, %s via:\n"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbackup:2920
#, c-format
-msgid "Burundi"
+msgid "\t-Hard drive.\n"
msgstr ""
-#: ../../services.pm:1
+#: standalone/drakbackup:2921
#, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
+msgid "\t-CD-R.\n"
msgstr ""
-"cron คือโปรแกรมมาตรฐานของ Unix ที่สั่งทำงานโปรแกรมในเวลาที่กำหนด\n"
-"vixie cron เพิ่มความสามารถให้กับ UNIX cron ซึ่งรวมถึงเพิ่ม\n"
-"ระบบความปลอดภัยและ option การปรับแต่งอื่นๆ"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakbackup:2922
#, c-format
-msgid "Add Client -->"
+msgid "\t-Tape \n"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:2923
#, c-format
-msgid "Read carefully!"
-msgstr "โปรดอ่านอย่างถี่ถ้วน!"
+msgid "\t-Network by FTP.\n"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:2924
#, c-format
-msgid "RW"
+msgid "\t-Network by SSH.\n"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: standalone/drakbackup:2925
#, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
+msgid "\t-Network by rsync.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: standalone/drakbackup:2926
#, c-format
-msgid "Port"
-msgstr "Port"
+msgid "\t-Network by webdav.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: standalone/drakbackup:2928
#, c-format
-msgid "No (experts only)"
+msgid "No configuration, please click Wizard or Advanced.\n"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakbackup:2933
#, c-format
-msgid "No kernel selected!"
+msgid ""
+"List of data to restore:\n"
+"\n"
msgstr ""
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "กรุณากด enter ระบบที่ต้องการ 'e' เพื่อเปลี่ยนแปลง "
+#: standalone/drakbackup:2935
+#, fuzzy, c-format
+msgid "- Restore System Files.\n"
+msgstr "ลบคิว"
-#: ../../standalone/drakperm:1
+#: standalone/drakbackup:2937 standalone/drakbackup:2947
#, c-format
-msgid "Set-GID"
+msgid " - from date: %s %s\n"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:2940
#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "รหัสผ่านไม่เหมือนกัน"
+msgid "- Restore User Files: \n"
+msgstr "เรียกคืนจากไฟล์"
+
+#: standalone/drakbackup:2945
+#, fuzzy, c-format
+msgid "- Restore Other Files: \n"
+msgstr "เรียกคืนจากไฟล์"
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:3121
#, c-format
msgid ""
-"For a multisession CD, only the first session will erase the cdrw. Otherwise "
-"the cdrw is erased before each backup."
+"List of data corrupted:\n"
+"\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/drakbackup:3123
#, fuzzy, c-format
-msgid "USB printer"
-msgstr "ไม่มีเครื่องพิมพ์"
-
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Right \"Windows\" key"
-msgstr ""
+msgid "Please uncheck or remove it on next time."
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
-#: ../../security/help.pm:1
+#: standalone/drakbackup:3133
#, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid "Backup files are corrupted"
msgstr ""
-#: ../../help.pm:1
+#: standalone/drakbackup:3154
#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"%s\" box. If not, simply turn off your computer."
+msgid " All of your selected data have been "
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:3155
#, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
+msgid " Successfuly Restored on %s "
msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "Resolutions"
-msgstr "ความละเอียด"
+#: standalone/drakbackup:3270
+#, fuzzy, c-format
+msgid " Restore Configuration "
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-#: ../../network/drakfirewall.pm:1
+#: standalone/drakbackup:3298
#, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+msgid "OK to restore the other files."
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: standalone/drakbackup:3316
#, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
+msgid "User list to restore (only the most recent date per user is important)"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/drakbackup:3382
#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "ลบคิว"
+msgid "Please choose the date to restore:"
+msgstr "คุณมีเม้าส์ชนิดใด"
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+#: standalone/drakbackup:3420
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
-#: ../../standalone/harddrake2:1
+#: standalone/drakbackup:3422
#, fuzzy, c-format
-msgid "/Autodetect _jaz drives"
-msgstr "ใช้ auto detection"
+msgid "Enter the directory where backups are stored"
+msgstr "กรุณาทดสอบเม้าส์"
-#: ../../any.pm:1
+#: standalone/drakbackup:3478
#, fuzzy, c-format
-msgid "No sharing"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Select another media to restore from"
+msgstr "คุณมีเม้าส์ชนิดใด"
+
+#: standalone/drakbackup:3480
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "อื่นๆ"
+
+#: standalone/drakbackup:3485
+#, fuzzy, c-format
+msgid "Restore system"
+msgstr "ติดตั้งระบบ"
+
+#: standalone/drakbackup:3486
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "เรียกคืนจากไฟล์"
+
+#: standalone/drakbackup:3487
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "เรียกคืนจากไฟล์"
+
+#: standalone/drakbackup:3489
+#, fuzzy, c-format
+msgid "select path to restore (instead of /)"
+msgstr "คุณมีเม้าส์ชนิดใด"
-#: ../../standalone/drakperm:1
+#: standalone/drakbackup:3493
#, c-format
-msgid "Move selected rule down one level"
+msgid "Do new backup before restore (only for incremental backups.)"
msgstr ""
-#: ../../common.pm:1
+#: standalone/drakbackup:3495
#, c-format
-msgid "TB"
-msgstr "TB"
+msgid "Remove user directories before restore."
+msgstr ""
+
+#: standalone/drakbackup:3575
+#, c-format
+msgid "Filename text substring to search for (empty string matches all):"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:3578
+#, c-format
+msgid "Search Backups"
+msgstr ""
+
+#: standalone/drakbackup:3597
#, fuzzy, c-format
-msgid "FATAL"
-msgstr "FAT"
+msgid "No matches found..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/printerdrake:1
+#: standalone/drakbackup:3601
#, fuzzy, c-format
-msgid "Refresh the list"
-msgstr "ฟอร์แมต loopback file %s"
+msgid "Restore Selected"
+msgstr "ลบคิว"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakbackup:3735
#, c-format
msgid ""
-" - Per client %s:\n"
-" \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-" \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-" \tdrakTermServ will help create these files."
+"Click date/time to see backup files.\n"
+"Ctrl-Click files to select multiple files."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: standalone/drakbackup:3741
#, c-format
msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+"Restore Selected\n"
+"Catalog Entry"
msgstr ""
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1
+#: standalone/drakbackup:3750
+#, fuzzy, c-format
+msgid ""
+"Restore Selected\n"
+"Files"
+msgstr "ลบคิว"
+
+#: standalone/drakbackup:3766
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "เรียกคืนจากไฟล์"
+
+#: standalone/drakbackup:3833
#, c-format
-msgid "Delete"
-msgstr "ลบ"
+msgid "Backup files not found at %s."
+msgstr ""
-#: ../../Xconfig/various.pm:1
+#: standalone/drakbackup:3846
+#, fuzzy, c-format
+msgid "Restore From CD"
+msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+
+#: standalone/drakbackup:3846
#, c-format
msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
msgstr ""
-"โปรแกรมจะกำหนดให้คอมพิวเตอร์ของคุณใช้งานแบบกราฟฟิคเมื่อเริ่มบูต\n"
-"คุณต้องการจะให้ทำงานแบบกราฟฟิคเมื่อรีบูตหรือไม่?"
-#: ../../standalone/drakfloppy:1
+#: standalone/drakbackup:3848
#, c-format
-msgid "Build the disk"
-msgstr "สร้างแผ่น"
+msgid "Not the correct CD label. Disk is labelled %s."
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: standalone/drakbackup:3858
#, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "ยกเลิกติดต่อ..."
+msgid "Restore From Tape"
+msgstr "กู้ตารางพาร์ติชั่น"
-#: ../../standalone/drakconnect:1
+#: standalone/drakbackup:3858
#, c-format
-msgid "Status:"
-msgstr "สถานะ:"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
-#: ../../network/network.pm:1
+#: standalone/drakbackup:3860
#, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "Not the correct tape label. Tape is labelled %s."
+msgstr ""
-#: ../../standalone/logdrake:1
+#: standalone/drakbackup:3871
#, fuzzy, c-format
-msgid "SSH Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "Restore Via Network"
+msgstr "เรียกคืนจากไฟล์"
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:3871
#, c-format
-msgid "\t-Network by rsync.\n"
+msgid "Restore Via Network Protocol: %s"
msgstr ""
-#: ../../network/isdn.pm:1
+#: standalone/drakbackup:3872
#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Boot Protocol"
+msgid "Host Name"
+msgstr "ชื่อโฮสต์:"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:3873
#, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "Host Path or Module"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Note that currently all 'net' media also use the hard drive."
-msgstr ""
+#: standalone/drakbackup:3880
+#, fuzzy, c-format
+msgid "Password required"
+msgstr "รหัสผ่าน"
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakauth:1 ../../standalone/drakboot:1
-#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
-#: ../../standalone/draksplash:1 ../../../move/move.pm:1
+#: standalone/drakbackup:3886
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "ชื่อผู้ใช้"
+
+#: standalone/drakbackup:3889
+#, fuzzy, c-format
+msgid "Hostname required"
+msgstr "ชื่อโฮสต์:"
+
+#: standalone/drakbackup:3894
#, c-format
-msgid "Error"
-msgstr "ผิดพลาด"
+msgid "Path or Module required"
+msgstr ""
-#: ../../any.pm:1
+#: standalone/drakbackup:3907
#, c-format
-msgid "allow \"su\""
+msgid "Files Restored..."
msgstr ""
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: standalone/drakbackup:3910
#, fuzzy, c-format
-msgid "Australia"
-msgstr "พอร์ตอนุกรม"
+msgid "Restore Failed..."
+msgstr "เรียกคืนจากไฟล์"
-#: ../../standalone/drakfont:1
+#: standalone/drakbackup:4015 standalone/drakbackup:4031
+#, fuzzy, c-format
+msgid "%s not retrieved..."
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+
+#: standalone/drakbackup:4155 standalone/drakbackup:4228
+#, fuzzy, c-format
+msgid "Search for files to restore"
+msgstr "คุณมีเม้าส์ชนิดใด"
+
+#: standalone/drakbackup:4160
#, c-format
-msgid "please wait during ttmkfdir..."
+msgid "Restore all backups"
msgstr ""
-#: ../../Xconfig/card.pm:1
+#: standalone/drakbackup:4169
#, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "คอนฟิกเฉพาะการ์ด \"%s\" (%s)"
+msgid "Custom Restore"
+msgstr "แบบปรับแก้ได้ (Customized) "
-#: ../../standalone/harddrake2:1
+#: standalone/drakbackup:4174 standalone/drakbackup:4224
#, fuzzy, c-format
-msgid "Level"
-msgstr "ระดับ"
+msgid "Restore From Catalog"
+msgstr "กู้ตารางพาร์ติชั่น"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:4196
#, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+msgid "Unable to find backups to restore...\n"
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
-#: ../../Xconfig/card.pm:1
+#: standalone/drakbackup:4197
#, fuzzy, c-format
-msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
-msgstr ""
-"เครื่องของคุณสนับสนุนการคอนฟิกแบบ multihead \n"
-"คุณต้องการทำอะไร?"
+msgid "Verify that %s is the correct path"
+msgstr "ถูกต้องหรือไม่?"
-#: ../../partition_table.pm:1
+#: standalone/drakbackup:4198
#, c-format
-msgid "mount failed: "
-msgstr "การเม้าท์ล้มเหลว: "
+msgid " and the CD is in the drive"
+msgstr ""
-#: ../../steps.pm:1
+#: standalone/drakbackup:4200
#, c-format
-msgid "Configure services"
-msgstr "ปรับแต่งการบริการต่างๆ"
+msgid "Backups on unmountable media - Use Catalog to restore"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakbackup:4216
#, c-format
-msgid "Broadcast Address:"
+msgid "CD in place - continue."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/drakbackup:4221
#, c-format
-msgid ""
-"the GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter. Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "Browse to new restore repository."
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Image"
-msgstr "Image"
+#: standalone/drakbackup:4258
+#, fuzzy, c-format
+msgid "Restore Progress"
+msgstr "เรียกคืนจากไฟล์"
-#: ../../services.pm:1
+#: standalone/drakbackup:4292 standalone/drakbackup:4404
+#: standalone/logdrake:175
#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
+msgid "Save"
+msgstr "สถานะ:"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
-msgstr ""
+#: standalone/drakbackup:4378
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../modules.pm:1
-#, c-format
-msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
-msgstr ""
+#: standalone/drakbackup:4430 standalone/drakbackup:4829
+#, fuzzy, c-format
+msgid "Restore"
+msgstr "เรียกคืนจากไฟล์"
-#: ../../standalone/drakfont:1
+#: standalone/drakbackup:4600
#, fuzzy, c-format
-msgid "Selected All"
-msgstr "เลือกไฟล์"
+msgid "The following packages need to be installed:\n"
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
-#: ../../printer/data.pm:1
-#, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+#: standalone/drakbackup:4622
+#, fuzzy, c-format
+msgid "Please select data to restore..."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
-#: ../../standalone/logdrake:1
+#: standalone/drakbackup:4662
#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "อุปกรณ์"
+msgid "Backup system files"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: standalone/drakbackup:4665
+#, fuzzy, c-format
+msgid "Backup user files"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbackup:4668
+#, fuzzy, c-format
+msgid "Backup other files"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: standalone/drakbackup:4671 standalone/drakbackup:4707
#, c-format
-msgid "device"
-msgstr "อุปกรณ์"
+msgid "Total Progress"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakbackup:4699
#, fuzzy, c-format
-msgid "Enter the directory to save to:"
-msgstr "กรุณาทดสอบเม้าส์"
+msgid "Sending files by FTP"
+msgstr "บันทึกลงไฟล์"
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: standalone/drakbackup:4702
#, fuzzy, c-format
-msgid "Greece"
-msgstr "กรีก"
+msgid "Sending files..."
+msgstr "บันทึกลงไฟล์"
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
-#, c-format
-msgid "All"
-msgstr "ทั้งหมด"
+#: standalone/drakbackup:4772
+#, fuzzy, c-format
+msgid "Backup Now from configuration file"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbackup:4777
#, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
+msgid "View Backup Configuration."
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "July"
-msgstr "กรกฎาคม"
+#: standalone/drakbackup:4803
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../printer/main.pm:1
+#: standalone/drakbackup:4808
#, fuzzy, c-format
-msgid "Prints into %s"
-msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
+msgid "Advanced Configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../install_steps_interactive.pm:1 ../../../move/move.pm:1
-#, c-format
-msgid "An error occurred"
-msgstr "มีปัญหาเกิดขึ้น"
+#: standalone/drakbackup:4813
+#, fuzzy, c-format
+msgid "View Configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../install_steps_gtk.pm:1
+#: standalone/drakbackup:4817
#, c-format
-msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+msgid "View Last Log"
msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-#: ../../keyboard.pm:1
+#: standalone/drakbackup:4822
#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "อาร์เมเนียน (พิมพ์ดีด)"
+msgid "Backup Now"
+msgstr "เซ็ตอัพระบบไฟล์"
-#: ../../security/help.pm:1
+#: standalone/drakbackup:4826
#, c-format
-msgid "Use password to authenticate users."
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
msgstr ""
-#: ../../security/help.pm:1
+#: standalone/drakbackup:4858 standalone/drakbackup:4865
#, c-format
-msgid ""
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+msgid "Drakbackup"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: standalone/drakboot:56
+#, fuzzy, c-format
+msgid "Graphical boot theme selection"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+
+#: standalone/drakboot:56
#, c-format
-msgid "manual"
-msgstr ""
+msgid "System mode"
+msgstr "System mode"
-#: ../../standalone/drakbackup:1
+#: standalone/drakboot:66 standalone/drakfloppy:46 standalone/harddrake2:97
+#: standalone/harddrake2:98 standalone/logdrake:70 standalone/printerdrake:150
+#: standalone/printerdrake:151 standalone/printerdrake:152
#, c-format
-msgid "Filename text to search for:"
-msgstr ""
+msgid "/_File"
+msgstr "/_ไฟล์"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakboot:67 standalone/drakfloppy:47 standalone/logdrake:76
#, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
+msgid "/File/_Quit"
+msgstr "/ไฟล์/_เลิก"
+
+#: standalone/drakboot:67 standalone/drakfloppy:47 standalone/harddrake2:98
+#: standalone/logdrake:76 standalone/printerdrake:152
+#, c-format
+msgid "<control>Q"
+msgstr "<control>Q"
-#: ../../standalone/drakfloppy:1
+#: standalone/drakboot:118
#, fuzzy, c-format
-msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+msgid "Install themes"
+msgstr "ติดตั้งระบบ"
+
+#: standalone/drakboot:119
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "สร้างพาร์ติชั่นใหม่"
+
+#: standalone/drakboot:133
+#, c-format
+msgid "Use graphical boot"
msgstr ""
-"ยังไม่มีอุปกรณ์ใน %s \n"
-"กรุณาใส่อุปกรณ์ด้วย"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakboot:138
#, c-format
msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+"Your system bootloader is not in framebuffer mode. To activate graphical "
+"boot, select a graphic video mode from the bootloader configuration tool."
msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/drakboot:145
#, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid "Theme"
+msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
-#: ../../any.pm:1
+#: standalone/drakboot:147
#, c-format
-msgid "Give the ram size in MB"
-msgstr "ให้ป้อนข้อมูลของขนาดหน่วยความจำเป็น Mb"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakboot:156
#, c-format
-msgid "Friday"
-msgstr "ศุกร์"
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnection from Internet complete."
-msgstr "ต่อเข้า Internet "
+msgid "Launch the graphical environment when your system starts"
+msgstr "รัน X-Window เมื่อเริ่มทำงาน"
-#: ../../any.pm:1
+#: standalone/drakboot:164
#, c-format
-msgid "Real name"
-msgstr "ชื่อเต็ม"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "ใช่แล้ว ผมต้องการ autologin สำหรับผู้ใช้รายนี้"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "done"
-msgstr "ทำเรียบร้อยแล้ว"
+#: standalone/drakboot:165
+#, c-format
+msgid "No, I don't want autologin"
+msgstr "ไม่ต้องการ autologin"
-#: ../../standalone/drakbackup:1
+#: standalone/drakboot:171
#, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid "Default user"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../security/level.pm:1
+#: standalone/drakboot:172
#, fuzzy, c-format
-msgid "Higher"
-msgstr "สูง"
+msgid "Default desktop"
+msgstr "Default"
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakboot:236
#, c-format
-msgid "Choose the partitions you want to format"
-msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"
+msgid "Installation of %s failed. The following error occured:"
+msgstr "การติดตั้ง %s ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
-#: ../../standalone/drakxtv:1
+#: standalone/drakbug:40
#, c-format
msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"To submit a bug report, click on the button report.\n"
+"This will open a web browser window on %s\n"
+" where you'll find a form to fill in. The information displayed above will "
+"be \n"
+"transferred to that server."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Adapter %s: %s"
-
-#: ../../keyboard.pm:1
+#: standalone/drakbug:48
#, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanese 106 keys"
+msgid "Mandrake Bug Report Tool"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/drakbug:53
+#, fuzzy, c-format
+msgid "Mandrake Control Center"
+msgstr "Control Center"
+
+#: standalone/drakbug:55
#, c-format
-msgid "Could not install the packages needed to share your scanner(s)."
+msgid "Synchronization tool"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakbug:56 standalone/drakbug:70 standalone/drakbug:204
+#: standalone/drakbug:206 standalone/drakbug:210
#, c-format
-msgid "This will take a few minutes."
+msgid "Standalone Tools"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbug:57
#, c-format
-msgid "Burkina Faso"
+msgid "HardDrake"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "June"
-msgstr "มิถุนายน"
+#: standalone/drakbug:58
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "Control Center"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Use scanners on remote computers"
-msgstr ""
+#: standalone/drakbug:59
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "แบบผู้เชี่ยวชาญ (Expert)"
-#: ../../standalone/drakperm:1
+#: standalone/drakbug:60
#, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "ลบคิว"
+msgid "Msec"
+msgstr "Mouse"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbug:61
#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Remote CUPS server"
+msgid "Remote Control"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../any.pm:1
+#: standalone/drakbug:62
#, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+msgid "Software Manager"
+msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
-#: ../../lang.pm:1
+#: standalone/drakbug:63
#, c-format
-msgid "Maldives"
+msgid "Urpmi"
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakbug:64
#, c-format
-msgid "compact"
-msgstr "แบบอัด (compact)"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 นาที"
+msgid "Windows Migration tool"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakbug:65
#, fuzzy, c-format
-msgid "type: fat"
-msgstr "ประเภท: "
+msgid "Userdrake"
+msgstr "เครื่องพิมพ์"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbug:66
#, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "บนบัส %d id %d\n"
+msgid "Configuration Wizards"
+msgstr "Network Configuration Wizard"
-#: ../../printer/main.pm:1
+#: standalone/drakbug:84
#, c-format
-msgid ", multi-function device"
+msgid ""
+"To submit a bug report, click the report button, which will open your "
+"default browser\n"
+"to Anthill where you will be able to upload the above information as a bug "
+"report."
msgstr ""
-#: ../../lang.pm:1
-#, c-format
-msgid "Laos"
-msgstr ""
+#: standalone/drakbug:102
+#, fuzzy, c-format
+msgid "Application:"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../advertising/04-configuration.pl:1
-#, c-format
-msgid ""
-"Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+#: standalone/drakbug:103 standalone/drakbug:115
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "เลือกกลุ่มแพ็คเก็จ"
-#: ../../security/help.pm:1
+#: standalone/drakbug:104
#, c-format
-msgid "Activate/Disable ethernet cards promiscuity check."
+msgid "Kernel:"
msgstr ""
-#: ../../install_interactive.pm:1
+#: standalone/drakbug:105 standalone/drakbug:116
#, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
+msgid "Release: "
+msgstr "โปรดรอสักครู่"
-#: ../../standalone/drakperm:1
+#: standalone/drakbug:110
#, c-format
-msgid "Up"
+msgid ""
+"Application Name\n"
+"or Full Path:"
msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Firewall"
-msgstr ""
+#: standalone/drakbug:113
+#, fuzzy, c-format
+msgid "Find Package"
+msgstr "แพ็คเก็จ %d ชุด"
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Area:"
-msgstr ""
+#: standalone/drakbug:117
+#, fuzzy, c-format
+msgid "Summary: "
+msgstr "รวมความ"
-#: ../../harddrake/data.pm:1
+#: standalone/drakbug:129
#, c-format
-msgid "(E)IDE/ATA controllers"
+msgid "YOUR TEXT HERE"
msgstr ""
-#: ../../fs.pm:1
+#: standalone/drakbug:132
#, c-format
-msgid "All I/O to the file system should be done synchronously."
+msgid "Bug Description/System Information"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakbug:136
#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "การคอนฟิก"
+msgid "Submit kernel version"
+msgstr "kernel version"
-#: ../../standalone/drakpxe:1
+#: standalone/drakbug:137
#, c-format
-msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+msgid "Submit cpuinfo"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakbug:138
#, c-format
-msgid "Saint Pierre and Miquelon"
+msgid "Submit lspci"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "September"
-msgstr "กันยายน"
+#: standalone/drakbug:159
+#, fuzzy, c-format
+msgid "Report"
+msgstr "Port"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "saving Bootsplash theme..."
-msgstr ""
+#: standalone/drakbug:219
+#, fuzzy, c-format
+msgid "Not installed"
+msgstr "ออกจากการติดตั้ง"
-#: ../../lang.pm:1
+#: standalone/drakbug:231
#, fuzzy, c-format
-msgid "Portugal"
-msgstr "Port"
+msgid "Package not installed"
+msgstr "ออกจากการติดตั้ง"
-#: ../../modules/interactive.pm:1
+#: standalone/drakbug:248
#, c-format
-msgid "Do you have another one?"
-msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
+msgid "NOT FOUND"
+msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/drakbug:259
#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
+msgid "connecting to %s ..."
+msgstr "อ่าน CUPS drivers database..."
-#: ../../network/network.pm:1
+#: standalone/drakbug:267
#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "กรุณาทดสอบเม้าส์"
+msgid "No browser available! Please install one"
+msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakbug:286
+#, fuzzy, c-format
+msgid "Please enter a package name."
+msgstr "โปรดป้อนชื่อผู้ใช้"
+
+#: standalone/drakbug:292
#, c-format
-msgid "Toggle to normal mode"
-msgstr "สำหรับผู้ชำนาญ > ปกติ"
+msgid "Please enter summary text."
+msgstr ""
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
+#: standalone/drakclock:29
#, c-format
-msgid "Generic"
-msgstr "Generic"
+msgid "DrakClock"
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakclock:36
#, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "ไซลินเดอร์ %d เป็น ไซลินเดอร์ %d\n"
+msgid "Change Time Zone"
+msgstr "โซนเวลา"
-#: ../../standalone/drakbug:1
+#: standalone/drakclock:42
#, c-format
-msgid "YOUR TEXT HERE"
+msgid "Timezone - DrakClock"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "New profile..."
-msgstr "profile ใหม่..."
-
-#: ../../modules/interactive.pm:1 ../../standalone/draksec:1
+#: standalone/drakclock:44
#, c-format
-msgid "NONE"
+msgid "GMT - DrakClock"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "คุณต้องการจะย้ายไปดิสก์ไหน"
+#: standalone/drakclock:44
+#, fuzzy, c-format
+msgid "Is your hardware clock set to GMT?"
+msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"
+
+#: standalone/drakclock:71
+#, fuzzy, c-format
+msgid "Network Time Protocol"
+msgstr "Network interface"
-#: ../../standalone/draksplash:1
+#: standalone/drakclock:73
#, c-format
-msgid "Display logo on Console"
+msgid ""
+"Your computer can synchronize its clock\n"
+" with a remote time server using NTP"
msgstr ""
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "โดเมน NIS"
+#: standalone/drakclock:74
+#, c-format
+msgid "Enable Network Time Protocol"
+msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakclock:82
#, fuzzy, c-format
-msgid "Saami (norwegian)"
-msgstr "Dvorak (Norwegian)"
+msgid "Server:"
+msgstr "เซิร์ฟเวอร์"
-#: ../../standalone/drakpxe:1
+#: standalone/drakclock:125 standalone/drakclock:137
#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interface %s (using module %s)"
+msgid "Reset"
+msgstr "ไม่ยอมรับ"
-#: ../../standalone/drakbackup:1
+#: standalone/drakclock:200
#, c-format
-msgid "INFO"
+msgid ""
+"We need to install ntp package\n"
+" to enable Network Time Protocol\n"
+"\n"
+"Do you want to install ntp ?"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakconnect:78
#, c-format
-msgid "Wallis and Futuna"
-msgstr ""
+msgid "Network configuration (%d adapters)"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก (%d adapters)"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakconnect:89 standalone/drakconnect:686
#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+msgid "Gateway:"
+msgstr "เกตเวย์:"
-#: ../../standalone/harddrake2:1
+#: standalone/drakconnect:89 standalone/drakconnect:686
#, c-format
-msgid "Is FPU present"
-msgstr ""
+msgid "Interface:"
+msgstr "Interface:"
-#: ../../services.pm:1
+#: standalone/drakconnect:93 standalone/net_monitor:105
#, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
+msgid "Wait please"
msgstr ""
-"ไม่มีข้อมูลเพิ่มเติม\n"
-"สำหรับการบริการนี้ ขอโทษครับ"
-#: ../../standalone/scannerdrake:1
+#: standalone/drakconnect:113
#, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
+msgid "Interface"
+msgstr "Interface"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakconnect:113 standalone/drakconnect:502
+#: standalone/drakvpn:1136
#, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Protocol"
+msgstr "Protocol"
-#: ../../lang.pm:1
+#: standalone/drakconnect:113
#, c-format
-msgid "Marshall Islands"
-msgstr ""
+msgid "Driver"
+msgstr "Driver"
-#: ../../ugtk2.pm:1
+#: standalone/drakconnect:113
+#, fuzzy, c-format
+msgid "State"
+msgstr "สถานะ:"
+
+#: standalone/drakconnect:130
#, c-format
-msgid "Is this correct?"
-msgstr "ถูกต้องหรือไม่?"
+msgid "Hostname: "
+msgstr "ชื่อโฮสต์:"
-#: ../../standalone/drakbackup:1
+#: standalone/drakconnect:132
#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "ลบ Windows(TM)"
+msgid "Configure hostname..."
+msgstr "คอนฟิกเม้าส์"
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Root password"
-msgstr "ไม่มีรหัสผ่าน"
+#: standalone/drakconnect:146 standalone/drakconnect:727
+#, c-format
+msgid "LAN configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakconnect:151
#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+msgid "Configure Local Area Network..."
+msgstr "ปรับแต่งระบบเน็ตเวิร์กภายใน..."
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "DVDRAM device"
-msgstr "อุปกรณ์"
+#: standalone/drakconnect:159 standalone/drakconnect:228
+#: standalone/drakconnect:232
+#, c-format
+msgid "Apply"
+msgstr "มีผลทันที"
-#: ../../security/help.pm:1
+#: standalone/drakconnect:254 standalone/drakconnect:263
+#: standalone/drakconnect:277 standalone/drakconnect:283
+#: standalone/drakconnect:293 standalone/drakconnect:294
+#: standalone/drakconnect:540
#, c-format
-msgid "if set to yes, report unowned files."
+msgid "TCP/IP"
msgstr ""
-#: ../../install_interactive.pm:1
+#: standalone/drakconnect:254 standalone/drakconnect:263
+#: standalone/drakconnect:277 standalone/drakconnect:421
+#: standalone/drakconnect:425 standalone/drakconnect:540
+#, fuzzy, c-format
+msgid "Account"
+msgstr "เลิก"
+
+#: standalone/drakconnect:283 standalone/drakconnect:347
+#: standalone/drakconnect:348 standalone/drakconnect:540
#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
+msgid "Wireless"
msgstr ""
-"คุณไม่มีสวอปพาร์ติชั่นเลย\n"
-"\n"
-"ต้องการจะทำต่อหรือไม่?"
-#: ../../install_steps_gtk.pm:1
+#: standalone/drakconnect:325
#, fuzzy, c-format
-msgid "Version: "
-msgstr "เวอร์ชั่น: %s\n"
+msgid "DNS servers"
+msgstr "เซิร์ฟเวอร์ DNS"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakconnect:332
#, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "ชื่อของเครื่องพิมพ์"
+msgid "Search Domain"
+msgstr "โดเมน NIS"
-#: ../../lang.pm:1
+#: standalone/drakconnect:338
#, fuzzy, c-format
-msgid "Suriname"
-msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+msgid "static"
+msgstr "กำหนดค่า IP แบบอัตโนมัติ"
-#: ../../network/adsl.pm:1
+#: standalone/drakconnect:338
#, fuzzy, c-format
-msgid "Use a floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
+msgid "dhcp"
+msgstr "ใช้ dhcp"
-#: ../../any.pm:1
+#: standalone/drakconnect:457
#, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Enable CD Boot?"
+msgid "Flow control"
+msgstr "<control>S"
-#: ../../fs.pm:1
-#, c-format
-msgid "Give write access to ordinary users"
-msgstr ""
+#: standalone/drakconnect:458
+#, fuzzy, c-format
+msgid "Line termination"
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
-#: ../../help.pm:1
+#: standalone/drakconnect:463
#, c-format
-msgid "Graphical Environment"
-msgstr "การทำงานแบบกราฟฟิก"
+msgid "Tone dialing"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakconnect:463
#, c-format
-msgid "Gibraltar"
+msgid "Pulse dialing"
msgstr ""
-#: ../../network/modem.pm:1
+#: standalone/drakconnect:468
#, fuzzy, c-format
-msgid "Do nothing"
-msgstr "but not matching"
+msgid "Use lock file"
+msgstr "เลือกไฟล์"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakconnect:471
#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP Client"
+msgid "Modem timeout"
+msgstr "Kernel Boot Timeout"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakconnect:475
#, c-format
-msgid "Filesystem type: "
-msgstr "ประเภทของระบบไฟล์: "
+msgid "Wait for dialup tone before dialing"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakconnect:478
#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "ทดสอบ connection..."
+msgid "Busy wait"
+msgstr "ออก"
-#: ../../lang.pm:1
-#, c-format
-msgid "Vietnam"
-msgstr ""
+#: standalone/drakconnect:482
+#, fuzzy, c-format
+msgid "Modem sound"
+msgstr "Mouse"
-#: ../../standalone/harddrake2:1
+#: standalone/drakconnect:483
#, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "รายละเอียด"
+msgid "Enable"
+msgstr "enable"
-#: ../advertising/10-security.pl:1
-#, c-format
-msgid "Optimize your security by using Mandrake Linux"
-msgstr ""
+#: standalone/drakconnect:483
+#, fuzzy, c-format
+msgid "Disable"
+msgstr "disable"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakconnect:522 standalone/harddrake2:58
#, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown@fensystems.co.uk>\n"
-"\n"
+msgid "Media class"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
-#: ../../standalone/drakperm:1 ../../standalone/draksec:1
-#: ../../standalone/harddrake2:1
+#: standalone/drakconnect:523 standalone/drakfloppy:140
#, c-format
-msgid "Help"
-msgstr "ความช่วยเหลือ"
+msgid "Module name"
+msgstr "ชี่อ module"
+
+#: standalone/drakconnect:524
+#, fuzzy, c-format
+msgid "Mac Address"
+msgstr "ค่า IP"
-#: ../../security/l10n.pm:1
+#: standalone/drakconnect:525 standalone/harddrake2:21
#, c-format
-msgid "Check if the network devices are in promiscuous mode"
+msgid "Bus"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: standalone/drakconnect:526 standalone/harddrake2:29
#, c-format
-msgid "Your personal phone number"
-msgstr "เบอร์โทรศัพท์ส่วนตัว"
+msgid "Location on the bus"
+msgstr ""
-#: ../../install_interactive.pm:1
+#: standalone/drakconnect:587
#, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "คุณต้องการเก็บ Windows ไว้ในขนาดใหน"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+"An unexpected error has happened:\n"
+"%s"
msgstr ""
-"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
-"กรุณารอสักครู่\n"
-"มันทำงานถูกต้องใหมครับ"
-#: ../../standalone/drakbackup:1
+#: standalone/drakconnect:597
#, fuzzy, c-format
-msgid "Username required"
-msgstr "ชื่อผู้ใช้"
+msgid "Remove a network interface"
+msgstr "เลือก network interface"
-#: ../../standalone/drakfloppy:1
+#: standalone/drakconnect:601
#, fuzzy, c-format
-msgid "Device"
-msgstr "อุปกรณ์: "
+msgid "Select the network interface to remove:"
+msgstr "เลือก network interface"
-#: ../../help.pm:1
-#, c-format
+#: standalone/drakconnect:617
+#, fuzzy, c-format
msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you may not have a keyboard that corresponds exactly to your language: for\n"
-"example, if you are an English speaking Swiss person, you may have a Swiss\n"
-"keyboard. Or if you speak English but are located in Quebec, you may find\n"
-"yourself in the same situation where your native language and keyboard do\n"
-"not match. In either case, this installation step will allow you to select\n"
-"an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"%s\" button to be presented with the complete list of\n"
-"supported keyboards.\n"
+"An error occured while deleting the \"%s\" network interface:\n"
"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
-msgstr ""
+"%s"
+msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakconnect:619
#, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบ SMB (เครื่องพิมพ์ในระบบวินโดวส์ 9x/NT)"
+msgid ""
+"Congratulations, the \"%s\" network interface has been succesfully deleted"
+msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/drakconnect:636
#, c-format
-msgid "URI: %s"
+msgid "No Ip"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakconnect:637
+#, fuzzy, c-format
+msgid "No Mask"
+msgstr "แพ็คเก็จชำรุด"
+
+#: standalone/drakconnect:638 standalone/drakconnect:798
#, c-format
-msgid "Valid user list changed, rewriting config file."
+msgid "up"
msgstr ""
-#: ../../standalone/drakfloppy:1
+#: standalone/drakconnect:638 standalone/drakconnect:798
+#, fuzzy, c-format
+msgid "down"
+msgstr "ทำเรียบร้อยแล้ว"
+
+#: standalone/drakconnect:677 standalone/net_monitor:415
#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd optional arguments"
+msgid "Connected"
+msgstr "เชื่อมต่ออยู่"
-#: ../advertising/03-software.pl:1
+#: standalone/drakconnect:677 standalone/net_monitor:415
+#, c-format
+msgid "Not connected"
+msgstr "ไม่เชื่อมต่อ"
+
+#: standalone/drakconnect:678
+#, c-format
+msgid "Disconnect..."
+msgstr "ยกเลิกติดต่อ..."
+
+#: standalone/drakconnect:678
+#, c-format
+msgid "Connect..."
+msgstr "ติดต่อ"
+
+#: standalone/drakconnect:707
#, c-format
msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
msgstr ""
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Rest of the world"
-
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakconnect:723
#, fuzzy, c-format
-msgid "Print test pages"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+msgid "Deactivate now"
+msgstr "แอ็คทีฟ"
-#: ../../standalone/drakconnect:1
+#: standalone/drakconnect:723
#, fuzzy, c-format
msgid "Activate now"
msgstr "แอ็คทีฟ"
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "64 MB or more"
-msgstr "64 MB หรือมากกว่า"
-
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakconnect:731
#, c-format
msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/drakconnect:745
#, c-format
-msgid "Please select the device where your %s is attached"
-msgstr ""
+msgid "LAN Configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakconnect:757
#, c-format
-msgid "Not formatted\n"
-msgstr "ยังไม่ได้ฟอร์แมต\n"
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
-#: ../../standalone/draksec:1
+#: standalone/drakconnect:766
#, c-format
-msgid "Periodic Checks"
-msgstr ""
+msgid "Boot Protocol"
+msgstr "Boot Protocol"
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "การปรับแต่ง LAN"
+#: standalone/drakconnect:767
+#, c-format
+msgid "Started on boot"
+msgstr "เริ่มทำงานตอน boot"
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: standalone/drakconnect:803
+#, c-format
+msgid ""
+"This interface has not been configured yet.\n"
+"Run the \"Add an interface\" assistant from the Mandrake Control Center"
+msgstr ""
-#: ../../security/level.pm:1
+#: standalone/drakconnect:858
#, c-format
msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+"You don't have any configured Internet connection.\n"
+"Please run \"Internet access\" in control center."
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakconnect:866
#, c-format
-msgid "First floppy drive"
-msgstr "Floppy Drive เครื่องแรก"
+msgid "Internet connection configuration"
+msgstr "การปรับแต่งการติดต่อเข้า internet"
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: standalone/drakconnect:907
#, c-format
-msgid "/File/_Quit"
-msgstr "/ไฟล์/_เลิก"
+msgid "Provider dns 1 (optional)"
+msgstr "ผู้ให้บริการ dns 1 (optional)"
-#: ../../keyboard.pm:1
+#: standalone/drakconnect:908
#, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid "Provider dns 2 (optional)"
+msgstr "ผู้ให้บริการ dns 2 (optional)"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakconnect:921
#, c-format
-msgid "Choose the new size"
-msgstr "เลือกขนาดใหม่"
+msgid "Ethernet Card"
+msgstr "Ethernet Card"
-#: ../../standalone/harddrake2:1
+#: standalone/drakconnect:922
#, c-format
-msgid "Media class"
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP Client"
-#: ../../standalone/XFdrake:1
+#: standalone/drakconnect:951
#, c-format
-msgid "You need to log out and back in again for changes to take effect"
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "การปรับแต่งการติดต่อเข้า internet"
-#: ../../standalone/scannerdrake:1
+#: standalone/drakconnect:952
#, c-format
-msgid "The %s is not known by this version of Scannerdrake."
-msgstr ""
+msgid "Internet access"
+msgstr "การติดต่อ internet"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "ไอซ์แลนด์"
+#: standalone/drakconnect:954 standalone/net_monitor:87
+#, c-format
+msgid "Connection type: "
+msgstr "ชนิดการเชื่อมต่อ"
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "จำเพาะ"
+#: standalone/drakconnect:957
+#, c-format
+msgid "Status:"
+msgstr "สถานะ:"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakedm:53
#, c-format
-msgid "Add host/network"
+msgid "Choosing a display manager"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/drakedm:54
#, c-format
-msgid "Scannerdrake will not be started now."
+msgid ""
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/drakedm:77
#, fuzzy, c-format
-msgid "Model name"
-msgstr "ชี่อ module"
+msgid "The change is done, do you want to restart the dm service ?"
+msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-#: ../../lang.pm:1
+#: standalone/drakfloppy:40
+#, c-format
+msgid "drakfloppy"
+msgstr "drakfloppy"
+
+#: standalone/drakfloppy:82
#, fuzzy, c-format
-msgid "Albania"
-msgstr "Iranian"
+msgid "Boot disk creation"
+msgstr "สร้าง boot disk"
-#: ../../lang.pm:1
+#: standalone/drakfloppy:83
#, c-format
-msgid "British Indian Ocean Territory"
-msgstr ""
+msgid "General"
+msgstr "ทั่วไป"
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Normal Mode"
-msgstr "โหมดธรรมดา"
+#: standalone/drakfloppy:86
+#, fuzzy, c-format
+msgid "Device"
+msgstr "อุปกรณ์: "
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "No CD-R/DVD-R in drive!"
-msgstr ""
+#: standalone/drakfloppy:92
+#, fuzzy, c-format
+msgid "Kernel version"
+msgstr "kernel version"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakfloppy:107
#, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+msgid "Preferences"
+msgstr "ข้อกำหนด: "
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: standalone/drakfloppy:121
+#, fuzzy, c-format
+msgid "Advanced preferences"
+msgstr "การปรับแต่ง LAN"
+
+#: standalone/drakfloppy:140
#, c-format
-msgid "No network adapter on your system!"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+msgid "Size"
+msgstr "ขนาด"
-#: ../../printer/main.pm:1
+#: standalone/drakfloppy:143
#, fuzzy, c-format
-msgid "Network %s"
-msgstr "Network interface"
+msgid "Mkinitrd optional arguments"
+msgstr "mkinitrd optional arguments"
-#: ../../keyboard.pm:1
+#: standalone/drakfloppy:145
#, c-format
-msgid "Malayalam"
-msgstr ""
+msgid "force"
+msgstr "บังคับ"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakfloppy:146
#, c-format
-msgid "Option %s out of range!"
-msgstr ""
-
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connect %s"
-msgstr "เชื่อมต่ออยู่"
+msgid "omit raid modules"
+msgstr "ยกเว้น raid modules"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "จำเพาะ"
+#: standalone/drakfloppy:147
+#, c-format
+msgid "if needed"
+msgstr "ถ้าต้องการ"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+#: standalone/drakfloppy:148
+#, c-format
+msgid "omit scsi modules"
+msgstr "ยกเว้น scsi modules"
-#: ../../../move/move.pm:1
+#: standalone/drakfloppy:151
#, c-format
-msgid "Continue without USB key"
-msgstr ""
+msgid "Add a module"
+msgstr "เพิ่ม 1 module"
-#: ../../install_steps.pm:1
+#: standalone/drakfloppy:160
#, c-format
-msgid "Duplicate mount point %s"
-msgstr "ทำซ้ำจุดเม้าท์ %s"
+msgid "Remove a module"
+msgstr "ลบทิ้ง 1 module"
-#: ../../security/help.pm:1
+#: standalone/drakfloppy:295
#, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Be sure a media is present for the device %s"
+msgstr "ตรวจให้แน่ใจว่ามีอุปกรณ์อยู่ใน%s"
+
+#: standalone/drakfloppy:301
+#, fuzzy, c-format
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
msgstr ""
+"ยังไม่มีอุปกรณ์ใน %s \n"
+"กรุณาใส่อุปกรณ์ด้วย"
-#: ../../network/tools.pm:1
+#: standalone/drakfloppy:305
#, c-format
-msgid "Connection Configuration"
-msgstr "การคอนฟิก Connection"
+msgid "Unable to fork: %s"
+msgstr "ไม่สามารถ forkได้.%s"
-#: ../../harddrake/v4l.pm:1
+#: standalone/drakfloppy:308
#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Generic"
+msgid "Floppy creation completed"
+msgstr "ชนิดการเชื่อมต่อ"
-#: ../../help.pm:1
+#: standalone/drakfloppy:308
#, c-format
+msgid "The creation of the boot floppy has been successfully completed \n"
+msgstr ""
+
+#: standalone/drakfloppy:311
+#, fuzzy, c-format
msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"%s\"\n"
-"if you have a working Internet connection, or \"%s\" if you prefer to\n"
-"install updated packages later.\n"
+"Unable to properly close mkbootdisk:\n"
"\n"
-"Choosing \"%s\" will display a list of places from which updates can be\n"
-"retrieved. You should choose one nearer to you. A package-selection tree\n"
-"will appear: review the selection, and press \"%s\" to retrieve and install\n"
-"the selected package(s), or \"%s\" to abort."
+"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
+"ไม่สามารถปิด mkbootdisk ได้อย่างสมบูรณ์: \n"
+"%s \n"
+"%s"
-#: ../../lang.pm:1
+#: standalone/drakfont:181
#, c-format
-msgid "Myanmar"
+msgid "Search installed fonts"
msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1
-#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1
-#, c-format
-msgid "Quit"
-msgstr "ออก"
-
-#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#: standalone/drakfont:183
#, c-format
-msgid "Auto allocate"
-msgstr "กำหนดแบบอัตโนมัติ"
+msgid "Unselect fonts installed"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakfont:206
#, c-format
-msgid "Check bad blocks?"
-msgstr "ตรวจสอบ bad blocks"
+msgid "parse all fonts"
+msgstr ""
-#: ../../harddrake/data.pm:1
+#: standalone/drakfont:208
#, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "อื่นๆ"
+msgid "No fonts found"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
-#: ../../standalone/harddrake2:1
+#: standalone/drakfont:216 standalone/drakfont:256 standalone/drakfont:323
+#: standalone/drakfont:356 standalone/drakfont:364 standalone/drakfont:390
+#: standalone/drakfont:408 standalone/drakfont:422
#, fuzzy, c-format
-msgid "burner"
-msgstr "เครื่องพิมพ์"
+msgid "done"
+msgstr "ทำเรียบร้อยแล้ว"
-#: ../../standalone/drakbug:1
+#: standalone/drakfont:221
#, c-format
-msgid "Bug Description/System Information"
+msgid "Could not find any font in your mounted partitions"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " (Default is all users)"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+#: standalone/drakfont:254
+#, c-format
+msgid "Reselect correct fonts"
+msgstr ""
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: standalone/drakfont:257
#, fuzzy, c-format
-msgid "No remote machines"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Could not find any font.\n"
+msgstr "ลบคิว"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakfont:267
#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Search for fonts in installed list"
+msgstr ""
+
+#: standalone/drakfont:292
+#, c-format
+msgid "%s fonts conversion"
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakfont:321
#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "การตรวจสอบสิทธิ์การใช้งานของ NIS"
+msgid "Fonts copy"
+msgstr "ฟอร์แมต Floppy"
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "อ็อปชั่น ``อ๊อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์'' จะต้องใส่รหัสผ่านด้วย"
+#: standalone/drakfont:324
+#, fuzzy, c-format
+msgid "True Type fonts installation"
+msgstr "กำลังเตรียมการติดตั้ง"
-#: ../../standalone/drakgw:1
+#: standalone/drakfont:331
#, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "การเชื่อมต่อ internet แบบ share ได้ทำงานแล้ว"
+msgid "please wait during ttmkfdir..."
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakfont:332
#, c-format
-msgid "United Arab Emirates"
+msgid "True Type install done"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: standalone/drakfont:338 standalone/drakfont:353
#, c-format
-msgid "Card IO_0"
-msgstr "Card IO_0"
+msgid "type1inst building"
+msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakfont:347
#, c-format
-msgid "Disable Local Config"
+msgid "Ghostscript referencing"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakfont:357
#, c-format
-msgid "Thailand"
+msgid "Suppress Temporary Files"
msgstr ""
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: standalone/drakfont:360
+#, fuzzy, c-format
+msgid "Restart XFS"
+msgstr "จำเพาะ"
+
+#: standalone/drakfont:406 standalone/drakfont:416
#, c-format
-msgid "Card IO_1"
-msgstr "Card IO_1"
+msgid "Suppress Fonts Files"
+msgstr ""
-#: ../../standalone/printerdrake:1
+#: standalone/drakfont:418
#, fuzzy, c-format
-msgid "Search:"
-msgstr "ค้นหา"
+msgid "xfs restart"
+msgstr "จำเพาะ"
-#: ../../lang.pm:1
+#: standalone/drakfont:426
#, c-format
-msgid "Kazakhstan"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakfont:474 standalone/drakfont:483
#, c-format
-msgid "Routers:"
+msgid "DrakFont"
msgstr ""
-#: ../../standalone/drakperm:1
+#: standalone/drakfont:484
#, fuzzy, c-format
-msgid "Write"
-msgstr "XFree %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Display all available remote CUPS printers"
-msgstr ""
+msgid "Font List"
+msgstr "กำหนดจุดเม้าท์"
-#: ../../install_steps_newt.pm:1
-#, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "การติดตั้งลีนุกซ์-แมนเดรก %s"
+#: standalone/drakfont:490
+#, fuzzy, c-format
+msgid "About"
+msgstr "เลิก"
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Unknown driver"
-msgstr ""
+#: standalone/drakfont:492 standalone/drakfont:681 standalone/drakfont:719
+#, fuzzy, c-format
+msgid "Uninstall"
+msgstr "ออกจากการติดตั้ง"
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Thai keyboard"
-msgstr "ไทย"
+#: standalone/drakfont:493
+#, fuzzy, c-format
+msgid "Import"
+msgstr "ฟอร์แมตพาร์ติชั่น"
-#: ../../lang.pm:1
+#: standalone/drakfont:509
#, c-format
-msgid "Bouvet Island"
+msgid ""
+"Copyright (C) 2001-2002 by MandrakeSoft \n"
+"\n"
+"\n"
+" DUPONT Sebastien (original version)\n"
+"\n"
+" CHAUMETTE Damien <dchaumette@mandrakesoft.com>\n"
+"\n"
+" VIGNAUD Thierry <tvignaud@mandrakesoft.com>"
msgstr ""
-#: ../../network/modem.pm:1
+#: standalone/drakfont:518
#, c-format
-msgid "Dialup options"
-msgstr "อ็อปชั่นของการหมุนโทรศัพท์"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "If no port is given, 631 will be taken as default."
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA."
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakfont:534
#, c-format
msgid ""
-" - Per client system configuration files:\n"
-" \tThrough clusternfs, each diskless client can have its own unique "
-"configuration files\n"
-" \ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-" \tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-" \t/etc/sysconfig/keyboard on a per-client basis.\n"
+"Thanks:\n"
"\n"
-" Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-" server on each client machine that has this feature enabled. Local "
-"configuration can be\n"
-" turned back off, retaining the configuration files, once the client "
-"machine is configured."
+" - pfm2afm: \n"
+"\t by Ken Borgendale:\n"
+"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n"
+"\n"
+" - type1inst:\n"
+"\t by James Macnicol: \n"
+"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"\n"
+" - ttf2pt1: \n"
+"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n"
+" Convert ttf font files to afm and pfb fonts\n"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: standalone/drakfont:553
+#, fuzzy, c-format
+msgid "Choose the applications that will support the fonts:"
+msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"
+
+#: standalone/drakfont:554
#, c-format
msgid ""
-"Change your Cd-Rom!\n"
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
"\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
msgstr ""
-"เปลี่ยน CD-ROM\n"
-"\n"
-"กรุณาใส่ CD-ROM \"%s\" และกด OK\n"
-"ถ้่าคุณไม่มี กรุณากด ยกเลิก (cancel) เพื่อหลีกเลี่ยงการติดตั้งจาก CD-ROM นี้"
-#: ../../keyboard.pm:1
+#: standalone/drakfont:564
#, c-format
-msgid "Polish"
-msgstr "โปแลนด์"
+msgid "Ghostscript"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: standalone/drakfont:565
#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Control Center"
+msgid "StarOffice"
+msgstr "ดี"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "\t-Network by webdav.\n"
-msgstr ""
+#: standalone/drakfont:566
+#, fuzzy, c-format
+msgid "Abiword"
+msgstr "เลิก"
-#: ../../printer/main.pm:1
+#: standalone/drakfont:567
#, fuzzy, c-format
-msgid ", multi-function device on a parallel port"
-msgstr "ชื่อของเครื่องพิมพ์"
+msgid "Generic Printers"
+msgstr "เครื่องพิมพ์"
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: standalone/drakfont:583
#, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr "ไม่สามารถตรวจพบ network adapter บนเครื่องนี้ กรุณารันโปรแกรมปรับแต่ง hardware"
+msgid "Select the font file or directory and click on 'Add'"
+msgstr ""
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "เน็ตมาสก์"
+#: standalone/drakfont:597
+#, fuzzy, c-format
+msgid "You've not selected any font"
+msgstr "ลบคิว"
-#: ../../diskdrake/hd_gtk.pm:1
+#: standalone/drakfont:646
#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Import fonts"
+msgstr "ฟอร์แมตพาร์ติชั่น"
-#: ../../mouse.pm:1
-#, c-format
-msgid "2 buttons"
-msgstr "2 buttons"
+#: standalone/drakfont:651
+#, fuzzy, c-format
+msgid "Install fonts"
+msgstr "ติดตั้งระบบ"
-#: ../../mouse.pm:1
+#: standalone/drakfont:686
#, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid "click here if you are sure."
+msgstr ""
-#: ../../network/isdn.pm:1
+#: standalone/drakfont:688
#, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
+msgid "here if no."
+msgstr ""
-#: ../../any.pm:1
+#: standalone/drakfont:727
#, c-format
-msgid "Label"
-msgstr "Label"
+msgid "Unselected All"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save on floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
+#: standalone/drakfont:730
+#, fuzzy, c-format
+msgid "Selected All"
+msgstr "เลือกไฟล์"
-#: ../../security/l10n.pm:1
+#: standalone/drakfont:733
#, fuzzy, c-format
-msgid "Check open ports"
-msgstr "ค้นหาเจอบน port %s"
+msgid "Remove List"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../standalone/printerdrake:1
+#: standalone/drakfont:744 standalone/drakfont:763
#, fuzzy, c-format
-msgid "Edit selected printer"
-msgstr "ค้นพบ %s"
+msgid "Importing fonts"
+msgstr "ฟอร์แมตพาร์ติชั่น"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakfont:748 standalone/drakfont:768
#, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "ใช้ auto detection"
+msgid "Initial tests"
+msgstr "ข้อความ init"
-#: ../../network/isdn.pm:1
+#: standalone/drakfont:749
#, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "คุณใช้การ์ด ISDN ใด?"
+msgid "Copy fonts on your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
-#: ../../services.pm:1
+#: standalone/drakfont:750
#, c-format
-msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+msgid "Install & convert Fonts"
msgstr ""
-"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
-"มันให้การทำงานของNFS server ที่ระบุในไฟล์ /etc/exports"
-#: ../../standalone/drakbug:1
+#: standalone/drakfont:751
#, fuzzy, c-format
-msgid "Msec"
-msgstr "Mouse"
+msgid "Post Install"
+msgstr "ติดตั้ง"
+
+#: standalone/drakfont:769
+#, fuzzy, c-format
+msgid "Remove fonts on your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+
+#: standalone/drakfont:770
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "ออกจากการติดตั้ง"
-#: ../../interactive/stdio.pm:1
+#: standalone/drakgw:59 standalone/drakgw:190
#, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
+msgid "Internet Connection Sharing"
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
-#: ../../harddrake/v4l.pm:1
+#: standalone/drakgw:117 standalone/drakvpn:49
#, c-format
-msgid "Number of capture buffers:"
+msgid "Sorry, we support only 2.4 and above kernels."
msgstr ""
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
+#: standalone/drakgw:128
+#, c-format
+msgid "Internet Connection Sharing currently enabled"
+msgstr "การเชื่อมต่อ internet แบบ share ได้ทำงานแล้ว"
-#: ../../help.pm:1
+#: standalone/drakgw:129
#, c-format
msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"%s\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"%s\" if you want to choose another partition for your new\n"
-"Mandrake Linux operating system installation.\n"
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
"\n"
-"Click on \"%s\" if you wish to select partitions that will be checked for\n"
-"bad blocks on the disk."
+"What would you like to do?"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakgw:133 standalone/drakvpn:99
#, c-format
-msgid "French"
-msgstr "ฝรั่งเศษ"
+msgid "disable"
+msgstr "disable"
-#: ../../keyboard.pm:1
+#: standalone/drakgw:133 standalone/drakgw:162 standalone/drakvpn:99
+#: standalone/drakvpn:125
#, c-format
-msgid "Czech (QWERTY)"
-msgstr "เชคโกสโลวาเกีย (QWERTY)"
+msgid "reconfigure"
+msgstr "คอนฟิกใหม่"
-#: ../../security/l10n.pm:1
-#, fuzzy, c-format
-msgid "Allow X Window connections"
-msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
+#: standalone/drakgw:133 standalone/drakgw:162 standalone/drakvpn:99
+#: standalone/drakvpn:125 standalone/drakvpn:372 standalone/drakvpn:731
+#, c-format
+msgid "dismiss"
+msgstr "เลิก"
-#: ../../standalone/service_harddrake:1
-#, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "ค้นหาเจอบน port %s"
+#: standalone/drakgw:136
+#, c-format
+msgid "Disabling servers..."
+msgstr "ยกเลิกการทำงานของ server"
-#: ../../network/shorewall.pm:1 ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Net Device"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+#: standalone/drakgw:150
+#, c-format
+msgid "Internet Connection Sharing is now disabled."
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: standalone/drakgw:157
#, c-format
-msgid "Summary"
-msgstr "รวมความ"
+msgid "Internet Connection Sharing currently disabled"
+msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakgw:158
#, c-format
msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do?"
msgstr ""
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Next ->"
-
-#: ../../bootloader.pm:1
-#, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
+#: standalone/drakgw:162 standalone/drakvpn:125
+#, c-format
+msgid "enable"
+msgstr "enable"
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: standalone/drakgw:169
#, c-format
-msgid "CHAP"
-msgstr ""
+msgid "Enabling servers..."
+msgstr "เริ่มทำงาน server"
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Puerto Rico"
-msgstr "Protocol"
+#: standalone/drakgw:175
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"
-#: ../../network/network.pm:1
+#: standalone/drakgw:191
#, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
"\n"
-"Welcome.\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
msgstr ""
+"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
+"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
+"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
+"\n"
+"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"
-#: ../../standalone/draksplash:1
+#: standalone/drakgw:211 standalone/drakvpn:210
#, c-format
msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
msgstr ""
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Telnet server"
-msgstr "X เซิร์ฟเวอร์"
+#: standalone/drakgw:230
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Interface %s (using module %s)"
-#: ../../keyboard.pm:1
+#: standalone/drakgw:231
#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ลิธัวเนีย \"แถวตัวเลข\" QWERTY"
+msgid "Interface %s"
+msgstr "Interface %s"
-#: ../../install_any.pm:1
+#: standalone/drakgw:241 standalone/drakpxe:138
#, c-format
msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
-msgstr ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr "ไม่สามารถตรวจพบ network adapter บนเครื่องนี้ กรุณารันโปรแกรมปรับแต่ง hardware"
-#: ../../lang.pm:1
+#: standalone/drakgw:247
#, c-format
-msgid "Anguilla"
-msgstr ""
+msgid "Network interface"
+msgstr "Network interface"
-#: ../../any.pm:1
+#: standalone/drakgw:248
#, c-format
-msgid "NIS Domain"
-msgstr "โดเมน NIS"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
+msgstr ""
+"ในเครื่องของคุณมี network adapter อันเดียวที่ได้รับการปรับแต่งแล้ว\n"
+"\n"
+"%s\n"
+"\n"
+"ผมกำลังจะใช้ adapter นี้กับระบบ LAN"
-#: ../../lang.pm:1
+#: standalone/drakgw:255
#, c-format
-msgid "Antarctica"
-msgstr ""
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "กรุณาเลือก network adapter ที่จะใช้กับระบบ LAN"
+
+#: standalone/drakgw:283
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "ไม่มีการคอนฟิกจอภาพ"
-#: ../../standalone/drakbackup:1
+#: standalone/drakgw:284
#, c-format
msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
"\n"
-"- User Files:\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakgw:289
#, fuzzy, c-format
-msgid "Mount options"
-msgstr "อ๊อปชั่นของโมดูล:"
+msgid "Automatic reconfiguration"
+msgstr "Boot Style Configuration"
-#: ../../lang.pm:1
+#: standalone/drakgw:289
#, c-format
-msgid "Jamaica"
+msgid "No (experts only)"
msgstr ""
-#: ../../services.pm:1
+#: standalone/drakgw:290
+#, fuzzy, c-format
+msgid "Show current interface configuration"
+msgstr "การคอนฟิก Internet"
+
+#: standalone/drakgw:291
+#, fuzzy, c-format
+msgid "Current interface configuration"
+msgstr "การคอนฟิก Internet"
+
+#: standalone/drakgw:292
#, c-format
msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: standalone/drakgw:305
#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "กำลังเตรียมการติดตั้ง"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Czech (QWERTZ)"
-msgstr "เชคโกสโลวาเกีย (QWERTZ)"
+#: standalone/drakgw:312
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
-#: ../../network/network.pm:1
+#: standalone/drakgw:316
#, c-format
-msgid "Track network card id (useful for laptops)"
+msgid ""
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakgw:320
#, fuzzy, c-format
-msgid "The port number should be an integer!"
-msgstr "Port number ควรเป็นตัวเลข"
+msgid "(This) DHCP Server IP"
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
-#: ../../standalone/draksplash:1
+#: standalone/drakgw:321
#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+msgid "The DNS Server IP"
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
-#: ../../standalone/drakbackup:1
+#: standalone/drakgw:322
#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+msgid "The internal domain name"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakgw:323
#, c-format
-msgid "Add to LVM"
-msgstr "เพิ่มให้ LVM"
+msgid "The DHCP start range"
+msgstr ""
-#: ../../network/network.pm:1
+#: standalone/drakgw:324
#, c-format
-msgid "DNS server"
-msgstr "เซิร์ฟเวอร์ DNS"
+msgid "The DHCP end range"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakgw:325
#, c-format
-msgid "Trinidad and Tobago"
+msgid "The default lease (in seconds)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakgw:326
#, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
+msgid "The maximum lease (in seconds)"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Host name or IP."
-msgstr "ชื่อโฮสต์:"
-
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "/_Edit"
-msgstr "Ext2"
+#: standalone/drakgw:327
+#, c-format
+msgid "Re-configure interface and DHCP server"
+msgstr ""
-#: ../../fsedit.pm:1
+#: standalone/drakgw:334
#, c-format
-msgid "simple"
-msgstr "ง่าย"
+msgid "The Local Network did not finish with `.0', bailing out."
+msgstr ""
-#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#: standalone/drakgw:344
#, c-format
-msgid "Clear all"
-msgstr "ล้างทั้งหมด"
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "มีความขัดแย้งของ LAN address ซึ่งเจอในคอนฟิกปัจจุบันใน %s!\n"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "ใช้ ให้พิมพ์กระดาษทดสอบทั้งสองแบบ"
+#: standalone/drakgw:354
+#, c-format
+msgid "Configuring..."
+msgstr "กำลังทำการคอนฟิก"
-#: ../../lang.pm:1
+#: standalone/drakgw:355
#, c-format
-msgid "Falkland Islands (Malvinas)"
-msgstr ""
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "กำลังปรับแต่ง scripts ติดตั้งโปรแกรม และเริ่มทำงาน servers..."
-#: ../../standalone/drakconnect:1
+#: standalone/drakgw:391 standalone/drakpxe:231 standalone/drakvpn:274
#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+msgid "Problems installing package %s"
+msgstr "ปัญหาการติดตั้งแพ็คเก็จ %s"
-#: ../../standalone/drakfloppy:1
+#: standalone/drakgw:584
#, fuzzy, c-format
-msgid "Boot disk creation"
-msgstr "สร้าง boot disk"
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP) and\n"
+" a Transparent Proxy Cache server (SQUID)."
+msgstr ""
+"ทุกอย่างได้ถูกทำการปรับแต่งเรียบร้อยแล้ว\n"
+"คุณสามารถใช้อินเตอร์เนตบนคอมพิวเตอร์อื่นๆใน LAN โดยใช้ (DHCP)"
-#: ../../standalone/drakbackup:1
+#: standalone/drakhelp:17
#, c-format
-msgid "Monday"
-msgstr "จันทร์"
+msgid ""
+" drakhelp 0.1\n"
+"Copyright (C) 2003-2004 MandrakeSoft.\n"
+"This is free software and may be redistributed under the terms of the GNU "
+"GPL.\n"
+"\n"
+"Usage: \n"
+msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: standalone/drakhelp:22
#, c-format
-msgid "Unknown model"
+msgid " --help - display this help \n"
msgstr ""
-#: ../../security/help.pm:1
+#: standalone/drakhelp:23
#, c-format
-msgid "if set to yes, check files/directories writable by everybody."
+msgid ""
+" --id <id_label> - load the html help page which refers to id_label\n"
msgstr ""
-#: ../../help.pm:1
-#, fuzzy, c-format
-msgid "authentication"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "เซ็ตอัพระบบไฟล์"
-
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/printerdrake:1
+#: standalone/drakhelp:24
#, c-format
-msgid "/_File"
-msgstr "/_ไฟล์"
+msgid ""
+" --doc <link> - link to another web page ( for WM welcome "
+"frontend)\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakhelp:35
#, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
+msgid ""
+"%s cannot be displayed \n"
+". No Help entry of this type\n"
msgstr ""
-#: ../../services.pm:1
+#: standalone/drakhelp:41
#, c-format
msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
msgstr ""
-#: ../../standalone/drakperm:1
+#: standalone/drakperm:21
+#, fuzzy, c-format
+msgid "System settings"
+msgstr "กำลังพาร์ติชั่น Custom disk"
+
+#: standalone/drakperm:22
+#, fuzzy, c-format
+msgid "Custom settings"
+msgstr "กำลังพาร์ติชั่น Custom disk"
+
+#: standalone/drakperm:23
+#, fuzzy, c-format
+msgid "Custom & system settings"
+msgstr "กำลังพาร์ติชั่น Custom disk"
+
+#: standalone/drakperm:43
#, fuzzy, c-format
msgid "Editable"
msgstr "disable"
-#: ../../network/ethernet.pm:1
+#: standalone/drakperm:48 standalone/drakperm:315
+#, c-format
+msgid "Path"
+msgstr ""
+
+#: standalone/drakperm:48 standalone/drakperm:250
+#, fuzzy, c-format
+msgid "User"
+msgstr "ชื่อผู้ใช้"
+
+#: standalone/drakperm:48 standalone/drakperm:250
+#, fuzzy, c-format
+msgid "Group"
+msgstr "เวิร์กกรุ๊ป (workgroup)"
+
+#: standalone/drakperm:48 standalone/drakperm:327
#, fuzzy, c-format
-msgid "Which dhcp client do you want to use ? (default is dhcp-client)"
+msgid "Permissions"
+msgstr "เวอร์ชั่น: %s\n"
+
+#: standalone/drakperm:107
+#, c-format
+msgid ""
+"Here you can see files to use in order to fix permissions, owners, and "
+"groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
msgstr ""
-"ชนิดของ dhcp client ที่ต้องการใช้คืออะไร\n"
-"การเลือกเบื้องต้นคือ dhcp-client"
-#: ../../keyboard.pm:1
+#: standalone/drakperm:110
#, c-format
-msgid "Tamil (ISCII-layout)"
+msgid ""
+"The current security level is %s.\n"
+"Select permissions to see/edit"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakperm:121
#, c-format
-msgid "Mayotte"
+msgid "Up"
msgstr ""
-#: ../../security/help.pm:1
+#: standalone/drakperm:121
#, c-format
-msgid "Set shell commands history size. A value of -1 means unlimited."
+msgid "Move selected rule up one level"
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: standalone/drakperm:122
#, fuzzy, c-format
-msgid "%d KB\n"
-msgstr "ขนาด: %d KB\n"
+msgid "Down"
+msgstr "ทำเรียบร้อยแล้ว"
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakperm:122
#, c-format
-msgid "Creating auto install floppy..."
-msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
+msgid "Move selected rule down one level"
+msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/drakperm:123
#, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Add a rule"
+msgstr "เพิ่ม 1 module"
-#: ../../lang.pm:1
+#: standalone/drakperm:123
#, fuzzy, c-format
-msgid "Russia"
-msgstr "รัสเซีย"
+msgid "Add a new rule at the end"
+msgstr "ไม่มีเครื่องพิมพ์"
-#: ../../steps.pm:1
+#: standalone/drakperm:124
#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "เครื่องพิมพ์"
+msgid "Delete selected rule"
+msgstr "ลบคิว"
+
+#: standalone/drakperm:125 standalone/drakvpn:329 standalone/drakvpn:690
+#: standalone/printerdrake:229
+#, fuzzy, c-format
+msgid "Edit"
+msgstr "Ext2"
-#: ../../network/netconnect.pm:1
+#: standalone/drakperm:125
#, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet card(s) ที่พบ"
+msgid "Edit current rule"
+msgstr ""
-#: ../../standalone/logdrake:1
+#: standalone/drakperm:242
+#, c-format
+msgid "browse"
+msgstr ""
+
+#: standalone/drakperm:252
#, fuzzy, c-format
-msgid "Syslog"
-msgstr "syslog"
+msgid "Read"
+msgstr "เรียกอีกครั้ง"
-#: ../../standalone/drakbackup:1
+#: standalone/drakperm:253
#, c-format
-msgid "Can't create catalog!"
+msgid "Enable \"%s\" to read the file"
msgstr ""
-#: ../advertising/11-mnf.pl:1
+#: standalone/drakperm:256
+#, fuzzy, c-format
+msgid "Write"
+msgstr "XFree %s"
+
+#: standalone/drakperm:257
#, c-format
-msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+msgid "Enable \"%s\" to write the file"
msgstr ""
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "ไม่มีพื้นที่เพียงพอสำหรับการแบ่งสัดส่วนพาร์ติชั่นแบบออโต้"
+#: standalone/drakperm:260
+#, c-format
+msgid "Execute"
+msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakperm:261
#, c-format
-msgid "Set root password"
-msgstr "เซ็ตรหัสผ่านรูท"
+msgid "Enable \"%s\" to execute the file"
+msgstr ""
-#: ../../security/l10n.pm:1
+#: standalone/drakperm:263
#, c-format
-msgid "Enable IP spoofing protection"
+msgid "Sticky-bit"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: standalone/drakperm:263
#, c-format
msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
msgstr ""
-#: ../../standalone/drakperm:1
+#: standalone/drakperm:264
+#, c-format
+msgid "Set-UID"
+msgstr ""
+
+#: standalone/drakperm:264
+#, fuzzy, c-format
+msgid "Use owner id for execution"
+msgstr "ใช้ auto detection"
+
+#: standalone/drakperm:265
+#, c-format
+msgid "Set-GID"
+msgstr ""
+
+#: standalone/drakperm:265
+#, fuzzy, c-format
+msgid "Use group id for execution"
+msgstr "ใช้ auto detection"
+
+#: standalone/drakperm:283
+#, fuzzy, c-format
+msgid "User :"
+msgstr "ชื่อผู้ใช้"
+
+#: standalone/drakperm:285
#, fuzzy, c-format
msgid "Group :"
msgstr "เวิร์กกรุ๊ป (workgroup)"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "หลังจากเปลี่ยนขนาดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะหายไป"
+#: standalone/drakperm:289
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "ยอมรับผู้ใช้"
-#: ../../standalone/drakconnect:1
+#: standalone/drakperm:290
#, c-format
-msgid "Internet connection configuration"
-msgstr "การปรับแต่งการติดต่อเข้า internet"
+msgid "When checked, owner and group won't be changed"
+msgstr ""
+
+#: standalone/drakperm:301
+#, fuzzy, c-format
+msgid "Path selection"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+
+#: standalone/drakperm:321
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Port"
+
+#: standalone/drakpxe:55
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "การปรับแต่ง LAN"
+
+#: standalone/drakpxe:111
+#, fuzzy, c-format
+msgid "Installation Server Configuration"
+msgstr "การปรับแต่ง LAN"
+
+#: standalone/drakpxe:112
+#, fuzzy, c-format
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
+"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
+"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
+"\n"
+"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"
+
+#: standalone/drakpxe:143
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"
+
+#: standalone/drakpxe:144
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Interface %s (using module %s)"
-#: ../../security/help.pm:1
+#: standalone/drakpxe:169
#, c-format
-msgid "Add the name as an exception to the handling of password aging by msec."
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
msgstr ""
-#: ../../network/isdn.pm:1
+#: standalone/drakpxe:173
#, c-format
-msgid "USB"
+msgid "The DHCP start ip"
msgstr ""
-#: ../../standalone/drakxtv:1
+#: standalone/drakpxe:174
#, c-format
-msgid "Scanning for TV channels"
+msgid "The DHCP end ip"
msgstr ""
-#: ../../standalone/drakbug:1
+#: standalone/drakpxe:187
#, c-format
-msgid "Kernel:"
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1
+#: standalone/drakpxe:192
#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."
+msgid "Installation image directory"
+msgstr "การปรับแต่ง LAN"
-#: ../../keyboard.pm:1
+#: standalone/drakpxe:196
#, fuzzy, c-format
-msgid "Bengali"
-msgstr "enable"
+msgid "No image found"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakpxe:197
#, c-format
-msgid "Preference: "
-msgstr "ข้อกำหนด: "
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
+msgstr ""
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: standalone/drakpxe:210
#, c-format
-msgid "Services: %d activated for %d registered"
+msgid ""
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
msgstr ""
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "สร้างแผ่นบูต"
+#: standalone/drakpxe:215
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
-#: ../../lang.pm:1
+#: standalone/draksec:44
#, c-format
-msgid "Solomon Islands"
+msgid "ALL"
msgstr ""
-#: ../../standalone/mousedrake:1
-#, fuzzy, c-format
-msgid "Please test your mouse:"
-msgstr "กรุณาทดสอบเม้าส์"
-
-#: ../../modules/interactive.pm:1
+#: standalone/draksec:44
#, c-format
-msgid "(module %s)"
-msgstr "(โมดูล %s)"
+msgid "LOCAL"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/draksec:44
#, c-format
-msgid "Workgroup"
-msgstr "เวิร์กกรุ๊ป (workgroup)"
+msgid "default"
+msgstr "default"
-#: ../../printer/printerdrake.pm:1
+#: standalone/draksec:44
#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "ชื่อของเครื่องพิมพ์"
+msgid "ignore"
+msgstr "ไม่มี"
-#: ../../standalone/drakconnect:1
+#: standalone/draksec:44
#, fuzzy, c-format
-msgid "down"
-msgstr "ทำเรียบร้อยแล้ว"
+msgid "no"
+msgstr "ข้อมูล"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Host Path or Module"
-msgstr ""
+#: standalone/draksec:44
+#, fuzzy, c-format
+msgid "yes"
+msgstr "ใช่"
-#: ../../printer/printerdrake.pm:1
+#: standalone/draksec:70
#, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
+msgid ""
+"Here, you can setup the security level and administrator of your machine.\n"
+"\n"
+"\n"
+"The Security Administrator is the one who will receive security alerts if "
+"the\n"
+"'Security Alerts' option is set. It can be a username or an email.\n"
+"\n"
+"\n"
+"The Security Level menu allows you to select one of the six preconfigured "
+"security levels\n"
+"provided with msec. These levels range from poor security and ease of use, "
+"to\n"
+"paranoid config, suitable for very sensitive server applications:\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but "
+"very\n"
+"easy to use security level. It should only be used for machines not "
+"connected to\n"
+"any network and that are not accessible to everybody.\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">Standard</span>: This is the standard "
+"security\n"
+"recommended for a computer that will be used to connect to the Internet as "
+"a\n"
+"client.\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">High</span>: There are already some\n"
+"restrictions, and more automatic checks are run every night.\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">Higher</span>: The security is now high "
+"enough\n"
+"to use the system as a server which can accept connections from many "
+"clients. If\n"
+"your machine is only a client on the Internet, you should choose a lower "
+"level.\n"
+"\n"
+"\n"
+"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the "
+"previous\n"
+"level, but the system is entirely closed and security features are at their\n"
+"maximum"
msgstr ""
-#: ../../standalone/drakgw:1
+#: standalone/draksec:118
#, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "การคอนฟิก Internet"
+msgid "(default value: %s)"
+msgstr " (Default)"
-#: ../../standalone/printerdrake:1
+#: standalone/draksec:159
#, fuzzy, c-format
-msgid "Add Printer"
-msgstr "เครื่องพิมพ์"
+msgid "Security Level:"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-#: ../../security/help.pm:1
+#: standalone/draksec:162
+#, fuzzy, c-format
+msgid "Security Alerts:"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+
+#: standalone/draksec:166
+#, fuzzy, c-format
+msgid "Security Administrator:"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
+
+#: standalone/draksec:168
+#, fuzzy, c-format
+msgid "Basic options"
+msgstr "/Options/ทดลอง"
+
+#: standalone/draksec:181
#, c-format
msgid ""
-"The argument specifies if clients are authorized to connect\n"
-"to the X server from the network on the tcp port 6000 or not."
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
msgstr ""
-#: ../../help.pm:1
-#, c-format
-msgid "Development"
-msgstr "พัฒนาซอฟท์แวร์ (Development)"
+#: standalone/draksec:183
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "อ๊อปชั่นของโมดูล:"
+
+#: standalone/draksec:183
+#, fuzzy, c-format
+msgid "System Options"
+msgstr "อ๊อปชั่นของโมดูล:"
-#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/scannerdrake:1
+#: standalone/draksec:229
#, c-format
-msgid "Done"
-msgstr "ทำเรียบร้อยแล้ว"
+msgid "Periodic Checks"
+msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: standalone/draksec:247
#, fuzzy, c-format
-msgid "Web Server"
-msgstr "เซิร์ฟเวอร์"
+msgid "Please wait, setting security level..."
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-#: ../../lang.pm:1
+#: standalone/draksec:253
#, fuzzy, c-format
-msgid "Chile"
-msgstr "เลือก file"
+msgid "Please wait, setting security options..."
+msgstr "กำลังเตรียมการติดตั้ง"
-#: ../../standalone/drakbackup:1
+#: standalone/draksound:47
+#, fuzzy, c-format
+msgid "No Sound Card detected!"
+msgstr "ไม่เชื่อมต่อ"
+
+#: standalone/draksound:48
#, c-format
-msgid "\tDo not include System Files\n"
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/draksound:55
#, c-format
msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the alsaconf or "
+"the sndconfig program. Just type \"alsaconf\" or \"sndconfig\" in a console."
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/draksplash:21
#, c-format
msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
msgstr ""
-#: ../../any.pm:1
+#: standalone/draksplash:67
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "สร้าง boot disk"
+
+#: standalone/draksplash:70
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "ขนาดจอภาพ"
+
+#: standalone/draksplash:71 standalone/draksplash:165
+#, fuzzy, c-format
+msgid "choose image file"
+msgstr "เลือกกิจกรรม"
+
+#: standalone/draksplash:72
+#, fuzzy, c-format
+msgid "Theme name"
+msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+
+#: standalone/draksplash:77
#, c-format
-msgid "(already added %s)"
-msgstr "(เพิ่ม %s เรียบร้อยแล้ว)"
+msgid "Browse"
+msgstr ""
-#: ../../any.pm:1
+#: standalone/draksplash:87 standalone/draksplash:153
#, fuzzy, c-format
-msgid "Bootloader installation in progress"
-msgstr "การติดตั้ง Bootloader"
+msgid "Configure bootsplash picture"
+msgstr "ปรับแต่งการบริการต่างๆ"
-#: ../../printer/main.pm:1
+#: standalone/draksplash:90
#, c-format
-msgid ", using command %s"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/draksplash:91
#, c-format
-msgid "Alt and Shift keys simultaneously"
+msgid ""
+"y coordinate of text box\n"
+"in number of characters"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/draksplash:92
#, c-format
-msgid "Flags"
+msgid "text width"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "เพิ่มผู้ใช้"
+#: standalone/draksplash:93
+#, c-format
+msgid "text box height"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/draksplash:94
#, c-format
-msgid "Host/network IP address missing."
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/draksplash:95
#, c-format
-msgid "weekly"
+msgid ""
+"the progress bar y coordinate\n"
+"of its upper left corner"
msgstr ""
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: standalone/draksplash:96
#, c-format
-msgid "Settings"
-msgstr "ค่าติดตั้ง"
+msgid "the width of the progress bar"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/draksplash:97
#, c-format
-msgid "The entered host/network IP is not correct.\n"
+msgid "the height of the progress bar"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/draksplash:98
#, c-format
-msgid "Create/Transfer backup keys for SSH"
+msgid "the color of the progress bar"
msgstr ""
-#: ../../any.pm:1
+#: standalone/draksplash:113
#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
+msgid "Preview"
+msgstr "อุปกรณ์"
-#: ../../printer/printerdrake.pm:1
+#: standalone/draksplash:115
#, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+msgid "Save theme"
+msgstr "ติดตั้งระบบ"
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
-msgstr ""
-"ถ้าคุณมี CD ทุกอย่าง กด OK\n"
-"ถ้าไม่มีเลย กด ยกเลิก (cancel)\n"
-"ถ้ามีแค่บางแผ่น เลือกเท่าที่มีแล้วกด OK"
+#: standalone/draksplash:116
+#, fuzzy, c-format
+msgid "Choose color"
+msgstr "เลือกจอภาพ"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: standalone/draksplash:119
#, c-format
-msgid "Wait please"
+msgid "Display logo on Console"
msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: standalone/draksplash:120
#, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Make kernel message quiet by default"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/draksplash:156 standalone/draksplash:320
+#: standalone/draksplash:448
#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Notice"
+msgstr "NoVideo"
+
+#: standalone/draksplash:156 standalone/draksplash:320
+#, c-format
+msgid "This theme does not yet have a bootsplash in %s !"
+msgstr ""
-#: ../../diskdrake/dav.pm:1
+#: standalone/draksplash:162
#, fuzzy, c-format
-msgid "New"
-msgstr "ใหม่"
+msgid "choose image"
+msgstr "เลือกกิจกรรม"
-#: ../../help.pm:1
+#: standalone/draksplash:204
#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only user authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against this. GNU/Linux is just as prone to operator error as any other\n"
-"operating system. Since \"root\" can overcome all limitations and\n"
-"unintentionally erase all data on partitions by carelessly accessing the\n"
-"partitions themselves, it is important that it be difficult to become\n"
-"\"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it far\n"
-"too easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will be the one you will have use the first time you\n"
-"connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"%s\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one for \"%s\". If you do not know which\n"
-"one to use, you should ask your network administrator.\n"
-"\n"
-"If you happen to have problems with remembering passwords, if your computer\n"
-"will never be connected to the internet or that you absolutely trust\n"
-"everybody who uses your computer, you can choose to have \"%s\"."
+msgid "saving Bootsplash theme..."
msgstr ""
-#: ../../security/l10n.pm:1
+#: standalone/draksplash:428
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+
+#: standalone/draksplash:448
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+
+#: standalone/draksplash:453
+#, fuzzy, c-format
+msgid "Generating preview ..."
+msgstr "กำลังตรวจสอบอุปกรณ์..."
+
+#: standalone/draksplash:499
#, c-format
-msgid "Name resolution spoofing protection"
+msgid "%s BootSplash (%s) preview"
msgstr ""
-#: ../../help.pm:1
+#: standalone/drakvpn:71
+#, fuzzy, c-format
+msgid "DrakVPN"
+msgstr "Dvorak (US)"
+
+#: standalone/drakvpn:93
+#, fuzzy, c-format
+msgid "The VPN connection is enabled."
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"
+
+#: standalone/drakvpn:94
#, c-format
msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
+"The setup of a VPN connection has already been done.\n"
"\n"
-"If you do not know what to choose, stay with the default option."
+"It's currently enabled.\n"
+"\n"
+"What would you like to do ?"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakvpn:103
#, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+msgid "Disabling VPN..."
+msgstr "ยกเลิกการทำงานของ server"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:112
#, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
+msgid "The VPN connection is now disabled."
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"
-#: ../../printer/main.pm:1
+#: standalone/drakvpn:119
#, fuzzy, c-format
-msgid "Uses command %s"
-msgstr "Port"
+msgid "VPN connection currently disabled"
+msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"
-#: ../../standalone/drakTermServ:1
+#: standalone/drakvpn:120
#, c-format
-msgid "Boot Floppy"
+msgid ""
+"The setup of a VPN connection has already been done.\n"
+"\n"
+"It's currently disabled.\n"
+"\n"
+"What would you like to do ?"
msgstr ""
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Norwegian"
-msgstr "นอร์เวย์"
+#: standalone/drakvpn:133
+#, fuzzy, c-format
+msgid "Enabling VPN..."
+msgstr "เริ่มทำงาน server"
-#: ../../standalone/scannerdrake:1
+#: standalone/drakvpn:139
#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "The VPN connection is now enabled."
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"
-#: ../../standalone/logdrake:1
+#: standalone/drakvpn:153 standalone/drakvpn:179
#, c-format
-msgid "Apache World Wide Web Server"
+msgid "Simple VPN setup."
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/drakvpn:154
#, c-format
-msgid "stepping of the cpu (sub model (generation) number)"
+msgid ""
+"You are about to configure your computer to use a VPN connection.\n"
+"\n"
+"With this feature, computers on your local private network and computers\n"
+"on some other remote private networks, can share resources, through\n"
+"their respective firewalls, over the Internet, in a secure manner. \n"
+"\n"
+"The communication over the Internet is encrypted. The local and remote\n"
+"computers look as if they were on the same network.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using\n"
+"drakconnect before going any further."
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "คุณมีเม้าส์ชนิดใด"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Configure bootsplash picture"
-msgstr "ปรับแต่งการบริการต่างๆ"
+#: standalone/drakvpn:180
+#, c-format
+msgid ""
+"VPN connection.\n"
+"\n"
+"This program is based on the following projects:\n"
+" - FreeSwan: \t\t\thttp://www.freeswan.org/\n"
+" - Super-FreeSwan: \t\thttp://www.freeswan.ca/\n"
+" - ipsec-tools: \t\t\thttp://ipsec-tools.sourceforge.net/\n"
+" - ipsec-howto: \t\thttp://www.ipsec-howto.org\n"
+" - the docs and man pages coming with the %s package\n"
+"\n"
+"Please read AT LEAST the ipsec-howto docs\n"
+"before going any further."
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakvpn:192
#, fuzzy, c-format
-msgid "Georgia"
-msgstr "นอร์เวย์"
+msgid "Kernel module."
+msgstr "ลบทิ้ง 1 module"
-#: ../../lang.pm:1
+#: standalone/drakvpn:193
#, c-format
-msgid "China"
-msgstr "จีน"
+msgid ""
+"The kernel need to have ipsec support.\n"
+"\n"
+"You're running a %s kernel version.\n"
+"\n"
+"This kernel has '%s' support."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:288
#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid "Security Policies"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-#: ../../standalone/printerdrake:1
+#: standalone/drakvpn:288
+#, c-format
+msgid "IKE daemon racoon"
+msgstr ""
+
+#: standalone/drakvpn:291 standalone/drakvpn:302
#, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Configuration file"
+msgstr "การปรับแต่ง LAN"
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:292
#, c-format
-msgid " Erase Now "
+msgid ""
+"Configuration step !\n"
+"\n"
+"You need to define the Security Policies and then to \n"
+"configure the automatic key exchange (IKE) daemon. \n"
+"The KAME IKE daemon we're using is called 'racoon'.\n"
+"\n"
+"What would you like to configure ?\n"
msgstr ""
-#: ../../fsedit.pm:1
+#: standalone/drakvpn:303
#, c-format
-msgid "server"
-msgstr "เซิร์ฟเวอร์"
+msgid ""
+"Next, we will configure the %s file.\n"
+"\n"
+"\n"
+"Simply click on Next.\n"
+msgstr ""
-#: ../../install_any.pm:1
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"
+#: standalone/drakvpn:321 standalone/drakvpn:681
+#, fuzzy, c-format
+msgid "%s entries"
+msgstr ", %s เซ็กเตอร์"
-#: ../../standalone/harddrake2:1
+#: standalone/drakvpn:322
#, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
+msgid ""
+"The %s file contents\n"
+"is divided into sections.\n"
+"\n"
+"You can now :\n"
+"\n"
+" - display, add, edit, or remove sections, then\n"
+" - commit the changes\n"
+"\n"
+"What would you like to do ?\n"
msgstr ""
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "กรุณารอสักครู่ ..."
+#: standalone/drakvpn:329 standalone/drakvpn:690
+#, fuzzy, c-format
+msgid "Display"
+msgstr "เรียกอีกครั้ง"
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "ยินดีต้อนรับสู่ GRUB the operating system chooser!"
+#: standalone/drakvpn:329 standalone/drakvpn:690
+#, fuzzy, c-format
+msgid "Commit"
+msgstr "แบบอัด (compact)"
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Grub"
-msgstr "Grub"
+#: standalone/drakvpn:343 standalone/drakvpn:347 standalone/drakvpn:705
+#: standalone/drakvpn:709
+#, fuzzy, c-format
+msgid "Display configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../harddrake/data.pm:1
+#: standalone/drakvpn:348
#, c-format
-msgid "SCSI controllers"
+msgid ""
+"The %s file does not exist.\n"
+"\n"
+"This must be a new configuration.\n"
+"\n"
+"You'll have to go back and choose 'add'.\n"
msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/drakvpn:364
#, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
+msgid "ipsec.conf entries"
msgstr ""
-#: ../../standalone/drakedm:1
+#: standalone/drakvpn:365
#, c-format
-msgid "Choosing a display manager"
+msgid ""
+"The %s file contains different sections.\n"
+"\n"
+"Here is its skeleton :\t'config setup' \n"
+"\t\t\t\t\t'conn default' \n"
+"\t\t\t\t\t'normal1'\n"
+"\t\t\t\t\t'normal2' \n"
+"\n"
+"You can now add one of these sections.\n"
+"\n"
+"Choose the section you would like to add.\n"
msgstr ""
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: standalone/drakvpn:372
#, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "ชื่อโฮสต์:"
+msgid "config setup"
+msgstr "คอนฟิกใหม่"
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Custom setup/crontab entry:"
-msgstr ""
+#: standalone/drakvpn:372
+#, fuzzy, c-format
+msgid "conn %default"
+msgstr "default"
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
+#: standalone/drakvpn:372
+#, fuzzy, c-format
+msgid "normal conn"
+msgstr "โหมดธรรมดา"
-#: ../../standalone/printerdrake:1
+#: standalone/drakvpn:378 standalone/drakvpn:419 standalone/drakvpn:506
#, fuzzy, c-format
-msgid "Configure CUPS printing system"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+msgid "Exists !"
+msgstr "Ext2"
-#: ../../lang.pm:1
+#: standalone/drakvpn:379 standalone/drakvpn:420
#, c-format
-msgid "Ecuador"
+msgid ""
+"A section with this name already exists.\n"
+"The section names have to be unique.\n"
+"\n"
+"You'll have to go back and add another section\n"
+"or change its name.\n"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: standalone/drakvpn:396
+#, c-format
+msgid ""
+"This section has to be on top of your\n"
+"%s file.\n"
+"\n"
+"Make sure all other sections follow this config\n"
+"setup section.\n"
+"\n"
+"Choose continue or previous when you are done.\n"
+msgstr ""
+
+#: standalone/drakvpn:401
#, fuzzy, c-format
-msgid "Add an item"
-msgstr "เพิ่มผู้ใช้"
+msgid "interfaces"
+msgstr "Interface"
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:402
#, c-format
-msgid "The printers on this machine are available to other computers"
+msgid "klipsdebug"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakvpn:403
#, c-format
-msgid "China (Hong Kong)"
+msgid "plutodebug"
msgstr ""
-#: ../../standalone/drakautoinst:1
+#: standalone/drakvpn:404
#, c-format
-msgid "I can't find needed image file `%s'."
+msgid "plutoload"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/drakvpn:405
#, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid "plutostart"
msgstr ""
-#: ../../network/drakfirewall.pm:1
+#: standalone/drakvpn:406
#, c-format
-msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+msgid "uniqueids"
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakvpn:440
#, c-format
-msgid "Shell"
-msgstr "เชลล์ที่ใช้"
+msgid ""
+"This is the first section after the config\n"
+"setup one.\n"
+"\n"
+"Here you define the default settings. \n"
+"All the other sections will follow this one.\n"
+"The left settings are optional. If don't define\n"
+"them here, globally, you can define them in each\n"
+"section.\n"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakvpn:447
#, c-format
-msgid "Sao Tome and Principe"
+msgid "pfs"
msgstr ""
-#: ../../network/isdn.pm:1
+#: standalone/drakvpn:448
#, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "keyingtries"
+msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: standalone/drakvpn:449
#, c-format
-msgid "Can't login using username %s (bad password?)"
+msgid "compress"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakvpn:450
#, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
+msgid "disablearrivalcheck"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: standalone/drakvpn:451 standalone/drakvpn:490
#, fuzzy, c-format
-msgid "Package not installed"
-msgstr "ออกจากการติดตั้ง"
+msgid "left"
+msgstr "ลบ"
-#: ../../lang.pm:1
+#: standalone/drakvpn:452 standalone/drakvpn:491
#, c-format
-msgid "American Samoa"
+msgid "leftcert"
msgstr ""
-#: ../advertising/12-mdkexpert.pl:1
-#, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "แบบผู้เชี่ยวชาญ (Expert)"
+#: standalone/drakvpn:453 standalone/drakvpn:492
+#, c-format
+msgid "leftrsasigkey"
+msgstr ""
-#: ../../standalone/drakconnect:1
+#: standalone/drakvpn:454 standalone/drakvpn:493
#, c-format
-msgid "Protocol"
-msgstr "Protocol"
+msgid "leftsubnet"
+msgstr ""
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+#: standalone/drakvpn:455 standalone/drakvpn:494
+#, c-format
+msgid "leftnexthop"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/drakvpn:484
#, c-format
-msgid "Harddrake help"
+msgid ""
+"Your %s file has several sections, or connections.\n"
+"\n"
+"You can now add a new section.\n"
+"Choose continue when you are done to write the data.\n"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/drakvpn:487
+#, fuzzy, c-format
+msgid "section name"
+msgstr "ชื่อการเชื่อมต่อ"
+
+#: standalone/drakvpn:488
#, c-format
-msgid "Bogomips"
+msgid "authby"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakvpn:489
#, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "การคอนฟิก Internet"
+msgid "auto"
+msgstr "เลิก"
+
+#: standalone/drakvpn:495
+#, fuzzy, c-format
+msgid "right"
+msgstr "สูง"
+
+#: standalone/drakvpn:496
+#, fuzzy, c-format
+msgid "rightcert"
+msgstr "สูง"
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:497
#, c-format
-msgid ""
-"\n"
-" DrakBackup Report Details\n"
-"\n"
-"\n"
+msgid "rightrsasigkey"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:498
#, c-format
-msgid "Restore all backups"
+msgid "rightsubnet"
msgstr ""
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:499
#, c-format
-msgid " on parallel port #%s"
+msgid "rightnexthop"
msgstr ""
-#: ../../security/help.pm:1
+#: standalone/drakvpn:507
#, c-format
msgid ""
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+"A section with this name already exists.\n"
+"The section names have to be unique.\n"
+"\n"
+"You'll have to go back and add another section\n"
+"or change the name of the section.\n"
msgstr ""
-#: ../../security/help.pm:1
+#: standalone/drakvpn:539
#, c-format
-msgid "if set to yes, check open ports."
+msgid ""
+"Add a Security Policy.\n"
+"\n"
+"You can now add a Security Policy.\n"
+"\n"
+"Choose continue when you are done to write the data.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:572 standalone/drakvpn:822
+#, fuzzy, c-format
+msgid "Edit section"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+
+#: standalone/drakvpn:573
#, c-format
-msgid "This may take a moment to erase the media."
+msgid ""
+"Your %s file has several sections or connections.\n"
+"\n"
+"You can choose here below the one you want to edit \n"
+"and then click on next.\n"
msgstr ""
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "You can't select/unselect this package"
-msgstr "คุณไม่สามารถเลือก/ไม่เลือกแพกเกจนี้"
+#: standalone/drakvpn:576 standalone/drakvpn:656 standalone/drakvpn:827
+#: standalone/drakvpn:873
+#, fuzzy, c-format
+msgid "Section names"
+msgstr "ชื่อการเชื่อมต่อ"
-#: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../harddrake/sound.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Warning"
-msgstr "คำเตือน"
+#: standalone/drakvpn:586
+#, fuzzy, c-format
+msgid "Can't edit !"
+msgstr "Adapter %s: %s"
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:587
#, c-format
msgid ""
+"You cannot edit this section.\n"
"\n"
-"- Other Files:\n"
+"This section is mandatory for Freswan 2.X.\n"
+"One has to specify version 2.0 on the top\n"
+"of the %s file, and eventually, disable or\n"
+"enable the oportunistic encryption.\n"
msgstr ""
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "ชื่อโฮสต์รีโมท"
+#: standalone/drakvpn:596
+#, c-format
+msgid ""
+"Your %s file has several sections.\n"
+"\n"
+"You can now edit the config setup section entries.\n"
+"Choose continue when you are done to write the data.\n"
+msgstr ""
-#: ../../any.pm:1
+#: standalone/drakvpn:607
#, c-format
-msgid "access to X programs"
+msgid ""
+"Your %s file has several sections or connections.\n"
+"\n"
+"You can now edit the default section entries.\n"
+"Choose continue when you are done to write the data.\n"
msgstr ""
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
+#: standalone/drakvpn:620
+#, c-format
+msgid ""
+"Your %s file has several sections or connections.\n"
+"\n"
+"You can now edit the normal section entries.\n"
+"\n"
+"Choose continue when you are done to write the data.\n"
+msgstr ""
-#: ../../standalone/printerdrake:1
+#: standalone/drakvpn:641
#, c-format
-msgid "/_Refresh"
+msgid ""
+"Edit a Security Policy.\n"
+"\n"
+"You can now add a Security Policy.\n"
+"\n"
+"Choose continue when you are done to write the data.\n"
msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
+#: standalone/drakvpn:652 standalone/drakvpn:869
#, fuzzy, c-format
-msgid "Italy"
-msgstr "อิตาลี"
+msgid "Remove section"
+msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../lang.pm:1
+#: standalone/drakvpn:653 standalone/drakvpn:870
#, c-format
-msgid "Cayman Islands"
+msgid ""
+"Your %s file has several sections or connections.\n"
+"\n"
+"You can choose here below the one you want to remove\n"
+"and then click on next.\n"
msgstr ""
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: standalone/drakvpn:682
#, c-format
-msgid "error unmounting %s: %s"
-msgstr "ผิดพลาดยกเลิกการเม้าท์ %s: %s"
+msgid ""
+"The racoon.conf file configuration.\n"
+"\n"
+"The contents of this file is divided into sections.\n"
+"You can now :\n"
+" - display \t\t (display the file contents)\n"
+" - add\t\t\t (add one section)\n"
+" - edit \t\t\t (modify parameters of an existing section)\n"
+" - remove \t\t (remove an existing section)\n"
+" - commit \t\t (writes the changes to the real file)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:710
#, c-format
-msgid "Name of printer"
-msgstr "ชื่อเครื่องพิมพ์"
+msgid ""
+"The %s file does not exist\n"
+"\n"
+"This must be a new configuration.\n"
+"\n"
+"You'll have to go back and choose configure.\n"
+msgstr ""
-#: ../../standalone/drakgw:1
+#: standalone/drakvpn:724
#, c-format
-msgid "disable"
-msgstr "disable"
+msgid "racoonf.conf entries"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:725
#, c-format
-msgid "Do it!"
+msgid ""
+"The 'add' sections step.\n"
+"\n"
+"Here below is the racoon.conf file skeleton :\n"
+"\t'path'\n"
+"\t'remote'\n"
+"\t'sainfo' \n"
+"\n"
+"Choose the section you would like to add.\n"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:731
#, c-format
-msgid "%s not responding"
+msgid "path"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:731
#, fuzzy, c-format
-msgid "Select model manually"
+msgid "remote"
msgstr "เครื่องพิมพ์แบบรีโมท"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Format"
-msgstr "ฟอร์แมต"
+#: standalone/drakvpn:731
+#, fuzzy, c-format
+msgid "sainfo"
+msgstr "ข้อมูล"
-#: ../../network/adsl.pm:1
+#: standalone/drakvpn:739
#, c-format
msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+"The 'add path' section step.\n"
+"\n"
+"The path sections have to be on top of your racoon.conf file.\n"
+"\n"
+"Put your mouse over the certificate entry to obtain online help."
msgstr ""
-"การติดต่อโดยทั่วไปของ adsl คือ pppoe.\n"
-"บางครั้งอาจใช้ pptp มีน้อยคนที่ใช้ dhcp.\n"
-"ถ้าคุณไม่ทราบ เลือก 'use pppoe'"
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakvpn:742
+#, fuzzy, c-format
+msgid "path type"
+msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+
+#: standalone/drakvpn:746
#, c-format
-msgid "Various"
+msgid ""
+"path include path : specifies a path to include\n"
+"a file. See File Inclusion.\n"
+"\tExample: path include '/etc/racoon'\n"
+"\n"
+"path pre_shared_key file : specifies a file containing\n"
+"pre-shared key(s) for various ID(s). See Pre-shared key File.\n"
+"\tExample: path pre_shared_key '/etc/racoon/psk.txt' ;\n"
+"\n"
+"path certificate path : racoon(8) will search this directory\n"
+"if a certificate or certificate request is received.\n"
+"\tExample: path certificate '/etc/cert' ;\n"
+"\n"
+"File Inclusion : include file \n"
+"other configuration files can be included.\n"
+"\tExample: include \"remote.conf\" ;\n"
+"\n"
+"Pre-shared key File : Pre-shared key file defines a pair\n"
+"of the identifier and the shared secret key which are used at\n"
+"Pre-shared key authentication method in phase 1."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: standalone/drakvpn:766
+#, fuzzy, c-format
+msgid "real file"
+msgstr "เลือกไฟล์"
+
+#: standalone/drakvpn:789
#, c-format
-msgid "Zip"
+msgid ""
+"Make sure you already have the path sections\n"
+"on the top of your racoon.conf file.\n"
+"\n"
+"You can now choose the remote settings.\n"
+"Choose continue or previous when you are done.\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakvpn:806
#, c-format
-msgid "Left Alt key"
+msgid ""
+"Make sure you already have the path sections\n"
+"on the top of your %s file.\n"
+"\n"
+"You can now choose the sainfo settings.\n"
+"Choose continue or previous when you are done.\n"
msgstr ""
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Load setting"
-msgstr "ฟอร์แมต"
+#: standalone/drakvpn:823
+#, c-format
+msgid ""
+"Your %s file has several sections or connections.\n"
+"\n"
+"You can choose here in the list below the one you want\n"
+"to edit and then click on next.\n"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:834
#, c-format
msgid ""
+"Your %s file has several sections.\n"
"\n"
"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"You can now edit the remote section entries.\n"
+"\n"
+"Choose continue when you are done to write the data.\n"
msgstr ""
-#: ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Set selected printer as the default printer"
-msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
+#: standalone/drakvpn:843
+#, c-format
+msgid ""
+"Your %s file has several sections.\n"
+"\n"
+"You can now edit the sainfo section entries.\n"
+"\n"
+"Choose continue when you are done to write the data."
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:851
#, c-format
msgid ""
+"This section has to be on top of your\n"
+"%s file.\n"
"\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
+"Make sure all other sections follow these path\n"
+"sections.\n"
+"\n"
+"You can now edit the path entries.\n"
+"\n"
+"Choose continue or previous when you are done.\n"
msgstr ""
-#: ../../printer/data.pm:1
+#: standalone/drakvpn:858
#, c-format
-msgid "PDQ"
+msgid "path_type"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakvpn:859
#, fuzzy, c-format
-msgid "Albanian"
-msgstr "Iranian"
+msgid "real_file"
+msgstr "เลือกไฟล์"
-#: ../../lang.pm:1
+#: standalone/drakvpn:899
#, c-format
-msgid "Lithuania"
+msgid ""
+"Everything has been configured.\n"
+"\n"
+"You may now share resources through the Internet,\n"
+"in a secure way, using a VPN connection.\n"
+"\n"
+"You should make sure that that the tunnels shorewall\n"
+"section is configured."
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakvpn:919
#, c-format
-msgid "Compact"
-msgstr "แบบอัด (Compact)"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "ค้นพบ %s"
+msgid "Sainfo source address"
+msgstr ""
-#: ../advertising/03-software.pl:1
+#: standalone/drakvpn:920
#, c-format
-msgid "MandrakeSoft has selected the best software for you"
+msgid ""
+"sainfo (source_id destination_id | anonymous) { statements }\n"
+"defines the parameters of the IKE phase 2\n"
+"(IPsec-SA establishment).\n"
+"\n"
+"source_id and destination_id are constructed like:\n"
+"\n"
+"\taddress address [/ prefix] [[port]] ul_proto\n"
+"\n"
+"Examples : \n"
+"\n"
+"sainfo anonymous (accepts connections from anywhere)\n"
+"\tleave blank this entry if you want anonymous\n"
+"\n"
+"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
+"\t203.178.141.209 is the source address\n"
+"\n"
+"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
+"\t172.16.1.0/24 is the source address"
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakvpn:937
#, fuzzy, c-format
-msgid "Local files"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Sainfo source protocol"
+msgstr "Boot Protocol"
-#: ../../pkgs.pm:1
+#: standalone/drakvpn:938
#, c-format
-msgid "maybe"
-msgstr "อาจจะ"
+msgid ""
+"sainfo (source_id destination_id | anonymous) { statements }\n"
+"defines the parameters of the IKE phase 2\n"
+"(IPsec-SA establishment).\n"
+"\n"
+"source_id and destination_id are constructed like:\n"
+"\n"
+"\taddress address [/ prefix] [[port]] ul_proto\n"
+"\n"
+"Examples : \n"
+"\n"
+"sainfo anonymous (accepts connections from anywhere)\n"
+"\tleave blank this entry if you want anonymous\n"
+"\n"
+"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
+"\tthe first 'any' allows any protocol for the source"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakvpn:952
#, c-format
-msgid "Panama"
+msgid "Sainfo destination address"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Can't open %s!"
-msgstr "Adapter %s: %s"
-
-#: ../../Xconfig/various.pm:1
+#: standalone/drakvpn:953
#, c-format
msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
+"sainfo (source_id destination_id | anonymous) { statements }\n"
+"defines the parameters of the IKE phase 2\n"
+"(IPsec-SA establishment).\n"
"\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
+"source_id and destination_id are constructed like:\n"
"\n"
-"Do you have this feature?"
+"\taddress address [/ prefix] [[port]] ul_proto\n"
+"\n"
+"Examples : \n"
+"\n"
+"sainfo anonymous (accepts connections from anywhere)\n"
+"\tleave blank this entry if you want anonymous\n"
+"\n"
+"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
+"\t203.178.141.218 is the destination address\n"
+"\n"
+"sainfo address 172.16.1.0/24 any address 172.16.2.0/24 any\n"
+"\t172.16.2.0/24 is the destination address"
msgstr ""
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: standalone/drakvpn:970
#, c-format
-msgid "Monitor"
-msgstr "จอภาพ"
+msgid "Sainfo destination protocol"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:971
#, c-format
msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"sainfo (source_id destination_id | anonymous) { statements }\n"
+"defines the parameters of the IKE phase 2\n"
+"(IPsec-SA establishment).\n"
"\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"source_id and destination_id are constructed like:\n"
"\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"\taddress address [/ prefix] [[port]] ul_proto\n"
"\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Examples : \n"
"\n"
+"sainfo anonymous (accepts connections from anywhere)\n"
+"\tleave blank this entry if you want anonymous\n"
+"\n"
+"sainfo address 203.178.141.209 any address 203.178.141.218 any\n"
+"\tthe last 'any' allows any protocol for the destination"
msgstr ""
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: standalone/drakvpn:985
#, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "หกหมื่นห้าพันสี (16 บิต)"
+msgid "PFS group"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:987
#, c-format
msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+"define the group of Diffie-Hellman exponentiations.\n"
+"If you do not require PFS then you can omit this directive.\n"
+"Any proposal will be accepted if you do not specify one.\n"
+"group is one of following: modp768, modp1024, modp1536.\n"
+"Or you can define 1, 2, or 5 as the DH group number."
msgstr ""
-#: ../../standalone/drakfont:1
+#: standalone/drakvpn:992
#, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+msgid "Lifetime number"
+msgstr "หมายเลขโทรศัพท์"
-#: ../../standalone/drakgw:1
+#: standalone/drakvpn:993
#, c-format
msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
+"define a lifetime of a certain time which will be pro-\n"
+"posed in the phase 1 negotiations. Any proposal will be\n"
+"accepted, and the attribute(s) will be not proposed to\n"
+"the peer if you do not specify it(them). They can be\n"
+"individually specified in each proposal.\n"
"\n"
-"Do you want an automatic re-configuration?\n"
+"Examples : \n"
"\n"
-"You can do it manually but you need to know what you're doing."
+" lifetime time 1 min; # sec,min,hour\n"
+" lifetime time 1 min; # sec,min,hour\n"
+" lifetime time 30 sec;\n"
+" lifetime time 30 sec;\n"
+" lifetime time 60 sec;\n"
+"\tlifetime time 12 hour;\n"
+"\n"
+"So, here, the lifetime numbers are 1, 1, 30, 30, 60 and 12.\n"
msgstr ""
-#: ../../Xconfig/various.pm:1
+#: standalone/drakvpn:1009
#, c-format
-msgid "Graphical interface at startup"
-msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
+msgid "Lifetime unit"
+msgstr ""
-#: ../../network/netconnect.pm:1
+#: standalone/drakvpn:1011
#, c-format
-msgid " adsl"
+msgid ""
+"define a lifetime of a certain time which will be pro-\n"
+"posed in the phase 1 negotiations. Any proposal will be\n"
+"accepted, and the attribute(s) will be not proposed to\n"
+"the peer if you do not specify it(them). They can be\n"
+"individually specified in each proposal.\n"
+"\n"
+"Examples : \n"
+"\n"
+" lifetime time 1 min; # sec,min,hour\n"
+" lifetime time 1 min; # sec,min,hour\n"
+" lifetime time 30 sec;\n"
+" lifetime time 30 sec;\n"
+" lifetime time 60 sec;\n"
+"\tlifetime time 12 hour ;\n"
+"\n"
+"So, here, the lifetime units are 'min', 'min', 'sec', 'sec', 'sec' and "
+"'hour'.\n"
msgstr ""
-#: ../../raid.pm:1
-#, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "ไม่มีพาร์ติชั่นพอสำหรับ RAID ระดับ %d\n"
+#: standalone/drakvpn:1027 standalone/drakvpn:1112
+#, fuzzy, c-format
+msgid "Encryption algorithm"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../../standalone/harddrake2:1
+#: standalone/drakvpn:1029
+#, fuzzy, c-format
+msgid "Authentication algorithm"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+
+#: standalone/drakvpn:1031
#, c-format
-msgid "format of floppies supported by the drive"
+msgid "Compression algorithm"
msgstr ""
-#: ../../network/tools.pm:1
+#: standalone/drakvpn:1039
+#, fuzzy, c-format
+msgid "Remote"
+msgstr "เครื่องพิมพ์แบบรีโมท"
+
+#: standalone/drakvpn:1040
#, c-format
-msgid "Firmware copy failed, file %s not found"
+msgid ""
+"remote (address | anonymous) [[port]] { statements }\n"
+"specifies the parameters for IKE phase 1 for each remote node.\n"
+"The default port is 500. If anonymous is specified, the state-\n"
+"ments apply to all peers which do not match any other remote\n"
+"directive.\n"
+"\n"
+"Examples : \n"
+"\n"
+"remote anonymous\n"
+"remote ::1 [8000]"
msgstr ""
-#: ../../standalone/drakTermServ:1
+#: standalone/drakvpn:1048
#, fuzzy, c-format
-msgid "local config: true"
-msgstr "คอนฟิกใหม่"
+msgid "Exchange mode"
+msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: standalone/drakvpn:1050
+#, c-format
msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
+"defines the exchange mode for phase 1 when racoon is the\n"
+"initiator. Also it means the acceptable exchange mode\n"
+"when racoon is responder. More than one mode can be\n"
+"specified by separating them with a comma. All of the\n"
+"modes are acceptable. The first exchange mode is what\n"
+"racoon uses when it is the initiator.\n"
msgstr ""
-"ต่อไปนี้เป็นข้อมูลรอการพิมพ์\n"
-"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connected"
-msgstr "เชื่อมต่ออยู่"
+#: standalone/drakvpn:1056
+#, fuzzy, c-format
+msgid "Generate policy"
+msgstr "ระบบความป้องกัน"
-#: ../../keyboard.pm:1
+#: standalone/drakvpn:1058
#, c-format
-msgid "Macedonian"
-msgstr "Macedonian"
+msgid ""
+"This directive is for the responder. Therefore you\n"
+"should set passive on in order that racoon(8) only\n"
+"becomes a responder. If the responder does not have any\n"
+"policy in SPD during phase 2 negotiation, and the direc-\n"
+"tive is set on, then racoon(8) will choice the first pro-\n"
+"posal in the SA payload from the initiator, and generate\n"
+"policy entries from the proposal. It is useful to nego-\n"
+"tiate with the client which is allocated IP address\n"
+"dynamically. Note that inappropriate policy might be\n"
+"installed into the responder's SPD by the initiator. So\n"
+"that other communication might fail if such policies\n"
+"installed due to some policy mismatches between the ini-\n"
+"tiator and the responder. This directive is ignored in\n"
+"the initiator case. The default value is off."
+msgstr ""
+
+#: standalone/drakvpn:1072
+#, fuzzy, c-format
+msgid "Passive"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
-#: ../../lang.pm:1
+#: standalone/drakvpn:1074
#, c-format
-msgid "Mali"
+msgid ""
+"If you do not want to initiate the negotiation, set this\n"
+"to on. The default value is off. It is useful for a\n"
+"server."
msgstr ""
-#: ../../harddrake/data.pm:1
+#: standalone/drakvpn:1077
#, c-format
-msgid "Bridges and system controllers"
+msgid "Certificate type"
msgstr ""
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/_Save"
-msgstr "/ไฟล์/_บันทึก"
+#: standalone/drakvpn:1079
+#, fuzzy, c-format
+msgid "My certfile"
+msgstr "เลือกไฟล์"
-#: ../../install_steps_gtk.pm:1
+#: standalone/drakvpn:1080
#, fuzzy, c-format
-msgid "No details"
-msgstr "รายละเอียด"
+msgid "Name of the certificate"
+msgstr "ชื่อเครื่องพิมพ์"
-#: ../../pkgs.pm:1
+#: standalone/drakvpn:1081
#, c-format
-msgid "very nice"
-msgstr "ดีมาก"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Preview"
-msgstr "อุปกรณ์"
+msgid "My private key"
+msgstr ""
-#: ../../standalone/drakbug:1
+#: standalone/drakvpn:1082
#, fuzzy, c-format
-msgid "Remote Control"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Name of the private key"
+msgstr "ชื่อเครื่องพิมพ์"
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:1083
#, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+msgid "Peers certfile"
+msgstr "เลือกไฟล์"
-#: ../../standalone/logdrake:1
+#: standalone/drakvpn:1084
#, c-format
-msgid "Wrong email"
+msgid "Name of the peers certificate"
msgstr ""
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree86 server: %s\n"
-msgstr "เซิร์ฟเวอร์ XFree86: %s\n"
-
-#: ../../standalone/drakTermServ:1
+#: standalone/drakvpn:1085
#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP Client"
+msgid "Verify cert"
+msgstr "ดีมาก"
-#: ../../keyboard.pm:1
+#: standalone/drakvpn:1087
#, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "จอร์เจีย (เลย์เอ้าท์แบบรัสเซีย)"
+msgid ""
+"If you do not want to verify the peer's certificate for\n"
+"some reason, set this to off. The default is on."
+msgstr ""
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/printerdrake:1
+#: standalone/drakvpn:1089
#, c-format
-msgid "/_Options"
-msgstr "/_Options"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "My identifier"
+msgstr ""
-#: ../../any.pm:1
+#: standalone/drakvpn:1090
#, c-format
msgid ""
+"specifies the identifier sent to the remote host and the\n"
+"type to use in the phase 1 negotiation. address, fqdn,\n"
+"user_fqdn, keyid and asn1dn can be used as an idtype.\n"
+"they are used like:\n"
+"\tmy_identifier address [address];\n"
+"\t\tthe type is the IP address. This is the default\n"
+"\t\ttype if you do not specify an identifier to use.\n"
+"\tmy_identifier user_fqdn string;\n"
+"\t\tthe type is a USER_FQDN (user fully-qualified\n"
+"\t\tdomain name).\n"
+"\tmy_identifier fqdn string;\n"
+"\t\tthe type is a FQDN (fully-qualified domain name).\n"
+"\tmy_identifier keyid file;\n"
+"\t\tthe type is a KEY_ID.\n"
+"\tmy_identifier asn1dn [string];\n"
+"\t\tthe type is an ASN.1 distinguished name. If\n"
+"\t\tstring is omitted, racoon(8) will get DN from\n"
+"\t\tSubject field in the certificate.\n"
"\n"
+"Examples : \n"
"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
+"my_identifier user_fqdn \"myemail@mydomain.com\""
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakvpn:1110
+#, fuzzy, c-format
+msgid "Peers identifier"
+msgstr "เครื่องพิมพ์"
+
+#: standalone/drakvpn:1111
+#, fuzzy, c-format
+msgid "Proposal"
+msgstr "Protocol"
+
+#: standalone/drakvpn:1113
#, c-format
msgid ""
+"specify the encryption algorithm used for the\n"
+"phase 1 negotiation. This directive must be defined. \n"
+"algorithm is one of following: \n"
"\n"
-"- Delete hard drive tar files after backup.\n"
+"des, 3des, blowfish, cast128 for oakley.\n"
+"\n"
+"For other transforms, this statement should not be used."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: standalone/drakvpn:1120
#, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
+msgid "Hash algorithm"
msgstr ""
-#: ../advertising/04-configuration.pl:1
+#: standalone/drakvpn:1121
#, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "การคอนฟิก Internet"
+msgid "Authentication method"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../../standalone/drakbackup:1 ../../standalone/logdrake:1
+#: standalone/drakvpn:1122
#, fuzzy, c-format
-msgid "Save"
-msgstr "สถานะ:"
+msgid "DH group"
+msgstr "เวิร์กกรุ๊ป (workgroup)"
-#: ../../standalone/scannerdrake:1
+#: standalone/drakvpn:1129
+#, fuzzy, c-format
+msgid "Command"
+msgstr "ชื่อโดเมน"
+
+#: standalone/drakvpn:1130
#, c-format
-msgid "The %s is unsupported"
+msgid "Source IP range"
msgstr ""
-#: ../../services.pm:1
+#: standalone/drakvpn:1131
#, c-format
-msgid "Load the drivers for your usb devices."
+msgid "Destination IP range"
msgstr ""
-#: ../../harddrake/data.pm:1
+#: standalone/drakvpn:1132
#, fuzzy, c-format
-msgid "Disk"
-msgstr "เดนมาร์ก"
+msgid "Upper-layer protocol"
+msgstr "Boot Protocol"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: standalone/drakvpn:1133
+#, c-format
+msgid "Flag"
+msgstr ""
+
+#: standalone/drakvpn:1134
#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+msgid "Direction"
+msgstr "รายละเอียด"
-#: ../advertising/01-thanks.pl:1
+#: standalone/drakvpn:1135
#, c-format
-msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+msgid "IPsec policy"
msgstr ""
-#: ../../lang.pm:1
+#: standalone/drakvpn:1137
#, fuzzy, c-format
-msgid "Israel"
-msgstr "อิสราเอล"
+msgid "Mode"
+msgstr "Mouse"
-#: ../../lang.pm:1
+#: standalone/drakvpn:1138
#, fuzzy, c-format
-msgid "French Guiana"
-msgstr "ฝรั่งเศษ"
+msgid "Source/destination"
+msgstr "Workstation ที่ทำงาน"
-#: ../../lang.pm:1
+#: standalone/drakvpn:1139 standalone/harddrake2:57
+#, fuzzy, c-format
+msgid "Level"
+msgstr "ระดับ"
+
+#: standalone/drakxtv:46
#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+msgid "USA (broadcast)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakxtv:46
#, c-format
-msgid "A command line must be entered!"
+msgid "USA (cable)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/drakxtv:46
#, c-format
-msgid "Select user manually"
+msgid "USA (cable-hrc)"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/drakxtv:46
#, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "การคอนฟิก Internet"
+msgid "Canada (cable)"
+msgstr "คานาดา (ควิเบค)"
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "คุณต้องการต่อตอน boot หรือไม่"
+#: standalone/drakxtv:47
+#, c-format
+msgid "Japan (broadcast)"
+msgstr ""
-#: ../../security/l10n.pm:1
+#: standalone/drakxtv:47
#, c-format
-msgid "Check additions/removals of suid root files"
+msgid "Japan (cable)"
msgstr ""
-#: ../../any.pm:1
+#: standalone/drakxtv:47
#, c-format
-msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+msgid "China (broadcast)"
msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/drakxtv:48
#, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Port"
+msgid "West Europe"
+msgstr "ยุโรป"
-#: ../../standalone/drakbackup:1
+#: standalone/drakxtv:48
#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "East Europe"
+msgstr "ยุโรป"
-#: ../../standalone/drakfloppy:1
+#: standalone/drakxtv:48
#, fuzzy, c-format
-msgid "Kernel version"
-msgstr "kernel version"
+msgid "France [SECAM]"
+msgstr "ฝรั่งเศษ"
-#: ../../help.pm:1
+#: standalone/drakxtv:49
#, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various groups, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' group installed.\n"
-"\n"
-" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
-"more of the applications that are in the workstation group.\n"
-"\n"
-" * \"%s\": if plan on using your machine for programming, choose the\n"
-"appropriate packages from that group.\n"
-"\n"
-" * \"%s\": if your machine is intended to be a server, select which of the\n"
-"more common services you wish to install on your machine.\n"
-"\n"
-" * \"%s\": this is where you will choose your preferred graphical\n"
-"environment. At least one must be selected if you want to have a graphical\n"
-"interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"%s\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"%s\": installs the base system plus basic utilities and their\n"
-"documentation. This installation is suitable for setting up a server.\n"
-"\n"
-" * \"%s\": will install the absolute minimum number of packages necessary\n"
-"to get a working Linux system. With this installation you will only have a\n"
-"command line interface. The total size of this installation is about 65\n"
-"megabytes.\n"
-"\n"
-"You can check the \"%s\" box, which is useful if you are familiar with the\n"
-"packages being offered or if you want to have total control over what will\n"
-"be installed.\n"
-"\n"
-"If you started the installation in \"%s\" mode, you can unselect all groups\n"
-"to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
+msgid "Newzealand"
msgstr ""
-#: ../../any.pm:1 ../../help.pm:1
+#: standalone/drakxtv:52
#, c-format
-msgid "Accept user"
-msgstr "ยอมรับผู้ใช้"
+msgid "Australian Optus cable TV"
+msgstr ""
-#: ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: standalone/drakxtv:84
#, c-format
-msgid "Server"
-msgstr "เซิร์ฟเวอร์"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
+msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/drakxtv:86
#, c-format
-msgid "Left Shift key"
+msgid "TV norm:"
msgstr ""
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid " local network"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+#: standalone/drakxtv:87
+#, c-format
+msgid "Area:"
+msgstr ""
-#: ../../interactive/stdio.pm:1
+#: standalone/drakxtv:91
#, c-format
-msgid "Bad choice, try again\n"
-msgstr "ตัวเลือกผิดพลาด โปรดทดลองอีกครั้ง\n"
+msgid "Scanning for TV channels in progress ..."
+msgstr ""
-#: ../../security/l10n.pm:1
+#: standalone/drakxtv:101
#, c-format
-msgid "Syslog reports to console 12"
+msgid "Scanning for TV channels"
msgstr ""
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: standalone/drakxtv:105
#, fuzzy, c-format
-msgid "Search new servers"
-msgstr "เซิร์ฟเวอร์ DNS"
+msgid "There was an error while scanning for TV channels"
+msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"
-#: ../../lang.pm:1
+#: standalone/drakxtv:106
#, c-format
-msgid "Heard and McDonald Islands"
+msgid "XawTV isn't installed!"
msgstr ""
-#: ../../harddrake/sound.pm:1
+#: standalone/drakxtv:109
#, c-format
-msgid "No alternative driver"
+msgid "Have a nice day!"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/drakxtv:110
#, c-format
-msgid "Toggle to expert mode"
-msgstr "ปกติ > สำหรับผู้ชำนาญ"
+msgid "Now, you can run xawtv (under X Window!) !\n"
+msgstr ""
-#: ../../printer/cups.pm:1
+#: standalone/drakxtv:131
#, c-format
-msgid "(on this machine)"
+msgid "No TV Card detected!"
msgstr ""
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
-
-#: ../../network/modem.pm:1
+#: standalone/drakxtv:132
#, c-format
msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/harddrake2:18
#, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"
+msgid "Alternative drivers"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:19
#, c-format
-msgid "Use Differential Backups"
+msgid "the list of alternative drivers for this sound card"
msgstr ""
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Driver"
-msgstr "Driver"
-
-#: ../../services.pm:1
+#: standalone/harddrake2:22
#, c-format
msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:23
#, fuzzy, c-format
-msgid "DVD-R device"
-msgstr "อุปกรณ์"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "รีโมต lpd"
+msgid "Channel"
+msgstr "ยกเลิก"
-#: ../../standalone/drakfont:1
+#: standalone/harddrake2:23
#, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+msgid "EIDE/SCSI channel"
msgstr ""
-#: ../../help.pm:1
+#: standalone/harddrake2:24
#, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second increments\n"
-"before your default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
+msgid "Bogomips"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:24
#, c-format
-msgid "Wednesday"
-msgstr "พุธ"
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter. Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
+msgstr ""
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: standalone/harddrake2:26
#, fuzzy, c-format
-msgid "Germany"
-msgstr "เยอรมัน"
+msgid "Bus identification"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "พอร์ตอนุกรม"
+#: standalone/harddrake2:27
+#, c-format
+msgid ""
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
+msgstr ""
-#: ../../mouse.pm:1
+#: standalone/harddrake2:30
#, c-format
-msgid "No mouse"
-msgstr "ไม่มีเม้าส์"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:33
#, fuzzy, c-format
-msgid "Choose your CD/DVD media size (MB)"
-msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
+msgid "Cache size"
+msgstr "ขนาดของ chunk"
-#: ../../security/l10n.pm:1
+#: standalone/harddrake2:33
#, c-format
-msgid "Check permissions of files in the users' home"
+msgid "size of the (second level) cpu cache"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/harddrake2:34
#, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "Drive capacity"
msgstr ""
-#: ../../ugtk2.pm:1
+#: standalone/harddrake2:34
#, c-format
-msgid "Collapse Tree"
-msgstr "ยุบ tree"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "การคอนฟิกหลังการติดตั้ง"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
-#: ../../steps.pm:1
+#: standalone/harddrake2:36
#, c-format
-msgid "Configure networking"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+msgid "Coma bug"
+msgstr ""
-#: ../../any.pm:1
+#: standalone/harddrake2:36
#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
+msgstr ""
-#: ../../help.pm:1
+#: standalone/harddrake2:37
#, c-format
-msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"%s\" button will allow you to select other languages to\n"
-"be installed on your workstation, thereby installing the language-specific\n"
-"files for system documentation and applications. For example, if you will\n"
-"host users from Spain on your machine, select English as the default\n"
-"language in the tree view and \"%s\" in the Advanced section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"%s\"\n"
-"box. Selecting support for a language means translations, fonts, spell\n"
-"checkers, etc. for that language will be installed. Additionally, the\n"
-"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
-"however that this is an experimental feature. If you select different\n"
-"languages requiring different encoding the unicode support will be\n"
-"installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+msgid "Cpuid family"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/harddrake2:37
#, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid "family of the cpu (eg: 6 for i686 class)"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:38
#, fuzzy, c-format
-msgid "tape"
-msgstr "ประเภท"
+msgid "Cpuid level"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-#: ../../standalone/drakconnect:1
+#: standalone/harddrake2:38
#, c-format
-msgid "DHCP client"
-msgstr "DHCP client"
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
-#: ../../security/l10n.pm:1
+#: standalone/harddrake2:39
#, c-format
-msgid "List users on display managers (kdm and gdm)"
+msgid "Frequency (MHz)"
msgstr ""
-#: ../../mouse.pm:1
+#: standalone/harddrake2:39
#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"
+msgid ""
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
+msgstr ""
-#: ../../partition_table.pm:1
+#: standalone/harddrake2:40
#, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "การกู้คืนจากไฟล์ %s ล้มเหลว: %s"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
-"\n"
-"Do you agree to lose all the partitions?\n"
+msgid "this field describes the device"
msgstr ""
-"ผมไม่สามารถอ่านตารางพาร์ติชั่นได้ มันเสียหายมากเกินไป \n"
-"ผมสามารถพยายามลบข้อมูลข้อมูลในพาร์ติชั่นที่เสียหาย\n"
-"อีกทางเลือกคือไม่ให้ DrakX ทำการเปลี่ยนแปลงตาราง\n"
-"ข้อความผิดพลาดคือ %s\n"
-"\n"
-"คุณแน่ใจว่าจะยอมให้พาร์ติชั่นทั้งหมดถูกลบไป\n"
-#: ../../standalone/drakbug:1
+#: standalone/harddrake2:41
#, fuzzy, c-format
-msgid "Find Package"
-msgstr "แพ็คเก็จ %d ชุด"
+msgid "Old device file"
+msgstr "เลือกไฟล์"
-#: ../../printer/printerdrake.pm:1
+#: standalone/harddrake2:42
#, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid "old static device name used in dev package"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/harddrake2:43
#, fuzzy, c-format
msgid "New devfs device"
msgstr "อุปกรณ์เกตเวย์"
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:44
#, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "new dynamic device name generated by core kernel devfs"
msgstr ""
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Boot Style Configuration"
-msgstr "Boot Style Configuration"
-
-#: ../../help.pm:1
+#: standalone/harddrake2:46
#, fuzzy, c-format
-msgid "Automatic time synchronization"
-msgstr "Boot Style Configuration"
+msgid "Module"
+msgstr "Mouse"
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:46
#, c-format
-msgid "Backup files not found at %s."
+msgid "the module of the GNU/Linux kernel that handles the device"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/harddrake2:47
#, c-format
-msgid "Armenian (phonetic)"
-msgstr "อาร์เมเนียน (โฟเนติค)"
-
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Card model:"
-msgstr "Card mem (DMA)"
+msgid "Flags"
+msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP Client"
+#: standalone/harddrake2:47
+#, c-format
+msgid "CPU flags reported by the kernel"
+msgstr ""
-#: ../advertising/01-thanks.pl:1
+#: standalone/harddrake2:48
#, c-format
-msgid "Thank you for choosing Mandrake Linux 9.2"
+msgid "Fdiv bug"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+#: standalone/harddrake2:49
+#, c-format
+msgid ""
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/harddrake2:50
#, c-format
-msgid "Turkmenistan"
+msgid "Is FPU present"
msgstr ""
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "All remote machines"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+#: standalone/harddrake2:50
+#, c-format
+msgid "yes means the processor has an arithmetic coprocessor"
+msgstr ""
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Install themes"
-msgstr "ติดตั้งระบบ"
+#: standalone/harddrake2:51
+#, c-format
+msgid "Whether the FPU has an irq vector"
+msgstr ""
-#: ../../help.pm:1
+#: standalone/harddrake2:51
#, c-format
-msgid "Espanol"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
msgstr ""
-#: ../../install_steps_interactive.pm:1
+#: standalone/harddrake2:52
#, c-format
-msgid "Preparing installation"
-msgstr "กำลังเตรียมการติดตั้ง"
+msgid "F00f bug"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/harddrake2:52
#, c-format
-msgid "Edit selected host/network"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
msgstr ""
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "เพิ่มผู้ใช้"
+#: standalone/harddrake2:53
+#, c-format
+msgid "Halt bug"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/harddrake2:54
#, c-format
-msgid "Nauru"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
msgstr ""
-#: ../../standalone/drakfont:1
+#: standalone/harddrake2:56
#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "กำลังเตรียมการติดตั้ง"
+msgid "Floppy format"
+msgstr "ฟอร์แมต"
-#: ../../printer/printerdrake.pm:1
+#: standalone/harddrake2:56
#, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "format of floppies supported by the drive"
msgstr ""
-#: ../../standalone/drakconnect:1
+#: standalone/harddrake2:57
#, c-format
-msgid "LAN configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "sub generation of the cpu"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/harddrake2:58
+#, c-format
+msgid "class of hardware device"
+msgstr ""
+
+#: standalone/harddrake2:59 standalone/harddrake2:60
+#: standalone/printerdrake:212
+#, fuzzy, c-format
+msgid "Model"
+msgstr "Mouse"
+
+#: standalone/harddrake2:59
#, fuzzy, c-format
msgid "hard disk model"
msgstr "Card mem (DMA)"
-#: ../../standalone/drakTermServ:1
+#: standalone/harddrake2:60
#, c-format
-msgid ""
-" - Maintain /etc/exports:\n"
-" \tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-" \tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-" \tdiskless clients.\n"
-"\n"
-" \tA typical exports entry for clusternfs is:\n"
-" \t\t\n"
-" \t/\t\t\t\t\t(ro,all_squash)\n"
-" \t/home\t\t\t\tSUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-" \tWith SUBNET/MASK being defined for your network."
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
msgstr ""
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
+#: standalone/harddrake2:61
+#, fuzzy, c-format
+msgid "Model name"
+msgstr "ชี่อ module"
-#: ../../standalone/drakfont:1
+#: standalone/harddrake2:61
#, c-format
-msgid "Get Windows Fonts"
+msgid "official vendor name of the cpu"
msgstr ""
-#: ../../mouse.pm:1
+#: standalone/harddrake2:62
+#, fuzzy, c-format
+msgid "Number of buttons"
+msgstr "2 buttons"
+
+#: standalone/harddrake2:62
+#, fuzzy, c-format
+msgid "the number of buttons the mouse has"
+msgstr "2 buttons"
+
+#: standalone/harddrake2:63
+#, fuzzy, c-format
+msgid "Name"
+msgstr "ชื่อ: "
+
+#: standalone/harddrake2:63
#, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "the name of the CPU"
+msgstr ""
-#: ../../standalone/drakclock:1
+#: standalone/harddrake2:64
+#, fuzzy, c-format
+msgid "network printer port"
+msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
+
+#: standalone/harddrake2:65
#, c-format
-msgid ""
-"Your computer can synchronize its clock\n"
-" with a remote time server using NTP"
+msgid "Processor ID"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/harddrake2:65
#, c-format
-msgid "Iranian"
-msgstr "Iranian"
+msgid "the number of the processor"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/harddrake2:66
#, fuzzy, c-format
-msgid "Croatia"
-msgstr "Croatian"
+msgid "Model stepping"
+msgstr "ฟอร์แมต"
-#: ../../standalone/drakconnect:1
+#: standalone/harddrake2:66
#, c-format
-msgid "Gateway:"
-msgstr "เกตเวย์:"
+msgid "stepping of the cpu (sub model (generation) number)"
+msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/harddrake2:67
#, fuzzy, c-format
-msgid "Add server"
-msgstr "เพิ่มผู้ใช้"
+msgid "the type of bus on which the mouse is connected"
+msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
-#: ../../printer/printerdrake.pm:1
+#: standalone/harddrake2:68
+#, c-format
+msgid "the vendor name of the device"
+msgstr ""
+
+#: standalone/harddrake2:69
+#, c-format
+msgid "the vendor name of the processor"
+msgstr ""
+
+#: standalone/harddrake2:70
#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Write protection"
+msgstr "ใช้ auto detection"
-#: ../advertising/10-security.pl:1
+#: standalone/harddrake2:70
#, c-format
msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together in order to highly reduce hacking risks."
+"the WP flag in the CR0 register of the cpu enforce write proctection at the "
+"memory page level, thus enabling the processor to prevent unchecked kernel "
+"accesses to user memory (aka this is a bug guard)"
msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/harddrake2:84 standalone/logdrake:77 standalone/printerdrake:146
+#: standalone/printerdrake:159
#, c-format
-msgid "Device: "
-msgstr "อุปกรณ์: "
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "เครื่องพิมพ์"
+msgid "/_Options"
+msgstr "/_Options"
-#: ../../install_steps_interactive.pm:1
+#: standalone/harddrake2:85 standalone/harddrake2:106 standalone/logdrake:79
+#: standalone/printerdrake:171 standalone/printerdrake:172
+#: standalone/printerdrake:173 standalone/printerdrake:174
#, c-format
-msgid "License agreement"
-msgstr "License agreement"
+msgid "/_Help"
+msgstr "/_ช่วยเหลือ"
-#: ../../standalone/draksec:1
+#: standalone/harddrake2:89
#, fuzzy, c-format
-msgid "System Options"
-msgstr "อ๊อปชั่นของโมดูล:"
+msgid "/Autodetect _printers"
+msgstr "ใช้ auto detection"
-#: ../../security/level.pm:1
+#: standalone/harddrake2:90
#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+msgid "/Autodetect _modems"
+msgstr "ใช้ auto detection"
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "This host is already in the list, it cannot be added again.\n"
-msgstr ""
+#: standalone/harddrake2:91
+#, fuzzy, c-format
+msgid "/Autodetect _jaz drives"
+msgstr "ใช้ auto detection"
-#: ../../printer/main.pm:1
+#: standalone/harddrake2:98 standalone/printerdrake:152
#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "/_Quit"
+msgstr "ออก"
-#: ../../standalone/drakfloppy:1
+#: standalone/harddrake2:107
#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "รายละเอียด"
+
+#: standalone/harddrake2:109
+#, c-format
+msgid "Harddrake help"
+msgstr ""
+
+#: standalone/harddrake2:110
+#, c-format
msgid ""
-"Unable to properly close mkbootdisk:\n"
+"Description of the fields:\n"
"\n"
-"<span foreground=\"Red\"><tt>%s</tt></span>"
msgstr ""
-"ไม่สามารถปิด mkbootdisk ได้อย่างสมบูรณ์: \n"
-"%s \n"
-"%s"
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:115
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "เลือกกราฟฟิคการ์ด"
+
+#: standalone/harddrake2:115
#, c-format
msgid ""
-"Incremental backups only save files that have changed or are new since the "
-"last backup."
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
msgstr ""
-#: ../../standalone/drakfont:1
+#: standalone/harddrake2:120 standalone/printerdrake:173
+#, c-format
+msgid "/_Report Bug"
+msgstr "/_แจ้ง Bug"
+
+#: standalone/harddrake2:121 standalone/printerdrake:174
#, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"
+msgid "/_About..."
+msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."
-#: ../../steps.pm:1
+#: standalone/harddrake2:122
#, c-format
-msgid "Configure X"
-msgstr "คอนฟิกระบบ X"
+msgid "About Harddrake"
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/harddrake2:124
#, c-format
-msgid "hd"
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"<span foreground=\"royalblue3\">Version:</span> %s\n"
+"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
+"tvignaud@mandrakesoft.com&gt;\n"
+"\n"
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/harddrake2:133
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "ค้นหาเจอบน port %s"
+
+#: standalone/harddrake2:140
+#, fuzzy, c-format
+msgid "Harddrake2 version %s"
+msgstr "การตรวจหาฮาร์ดไดรว์"
+
+#: standalone/harddrake2:156
+#, fuzzy, c-format
+msgid "Detected hardware"
+msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"
+
+#: standalone/harddrake2:161
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "คอนฟิกเม้าส์"
+
+#: standalone/harddrake2:168
#, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ตุรกี (โมเดลแบบแผน \"F\")"
+msgid "Run config tool"
+msgstr ""
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: standalone/harddrake2:215
#, c-format
-msgid "Congratulations!"
-msgstr "ขอแสดงความยินดี"
+msgid "unknown"
+msgstr ""
-#: ../../standalone/drakperm:1
+#: standalone/harddrake2:216
#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "ใช้ auto detection"
+msgid "Unknown"
+msgstr "Generic"
-#: ../../security/l10n.pm:1
-#, fuzzy, c-format
-msgid "Allow remote root login"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+#: standalone/harddrake2:234
+#, c-format
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
-#: ../../standalone/drakperm:1
+#: standalone/harddrake2:282
#, fuzzy, c-format
-msgid "Down"
-msgstr "ทำเรียบร้อยแล้ว"
+msgid "secondary"
+msgstr "%d วินาที"
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: standalone/harddrake2:282
#, c-format
-msgid "Raw printer (No driver)"
+msgid "primary"
msgstr ""
-#: ../../network/modem.pm:1
+#: standalone/harddrake2:290
#, fuzzy, c-format
-msgid "Install rpm"
-msgstr "ติดตั้ง"
+msgid "burner"
+msgstr "เครื่องพิมพ์"
-#: ../../printer/printerdrake.pm:1
+#: standalone/harddrake2:290
#, c-format
-msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+msgid "DVD"
msgstr ""
-#: ../../install_steps_gtk.pm:1
+#: standalone/keyboarddrake:24
#, c-format
-msgid "Time remaining "
-msgstr "เวลาที่เหลือ "
+msgid "Please, choose your keyboard layout."
+msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
-#: ../../keyboard.pm:1
+#: standalone/keyboarddrake:33
#, c-format
-msgid "UK keyboard"
-msgstr "อังกฤษ"
+msgid "Do you want the BackSpace to return Delete in console?"
+msgstr ""
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: standalone/localedrake:60
#, c-format
-msgid "Unmount"
-msgstr "เลิกเม้าท์์ระบบไฟล์"
+msgid "The change is done, but to be effective you must logout"
+msgstr ""
-#: ../../mouse.pm:1
+#: standalone/logdrake:50
+#, c-format
+msgid "Mandrake Tools Explanation"
+msgstr ""
+
+#: standalone/logdrake:51
#, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Logdrake"
+msgstr "logdrake"
-#: ../../standalone/drakfont:1
+#: standalone/logdrake:64
#, c-format
-msgid "Uninstall Fonts"
+msgid "Show only for the selected day"
msgstr ""
-#: ../../../move/move.pm:1
-#, fuzzy, c-format
-msgid "Please wait, detecting and configuring devices..."
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+#: standalone/logdrake:71
+#, c-format
+msgid "/File/_New"
+msgstr "/ไฟล์/_ใหม่"
-#: ../../keyboard.pm:1
+#: standalone/logdrake:71
#, c-format
-msgid "German (no dead keys)"
-msgstr "German (no dead keys)"
+msgid "<control>N"
+msgstr "<control>N"
-#: ../../standalone/drakbackup:1
+#: standalone/logdrake:72
#, c-format
-msgid "\tSend mail to %s\n"
-msgstr ""
+msgid "/File/_Open"
+msgstr "/ไฟล์/_เปิด"
-#: ../../printer/printerdrake.pm:1
+#: standalone/logdrake:72
#, c-format
-msgid "Transferring %s..."
-msgstr ""
+msgid "<control>O"
+msgstr "<control>O"
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: standalone/logdrake:73
#, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "สามหมื่นสองพันสี (15 บิต)"
+msgid "/File/_Save"
+msgstr "/ไฟล์/_บันทึก"
-#: ../../any.pm:1
+#: standalone/logdrake:73
#, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
+msgid "<control>S"
+msgstr "<control>S"
-#: ../../lang.pm:1
+#: standalone/logdrake:74
#, c-format
-msgid "Gambia"
-msgstr ""
+msgid "/File/Save _As"
+msgstr "/ไฟล์/บันทึก_เป็น"
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Control Center"
+#: standalone/logdrake:75
+#, c-format
+msgid "/File/-"
+msgstr "/ไฟล์/-"
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1
-#: ../../../move/move.pm:1
-#, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+#: standalone/logdrake:78
+#, c-format
+msgid "/Options/Test"
+msgstr "/Options/ทดลอง"
-#: ../../printer/main.pm:1
+#: standalone/logdrake:80
#, c-format
-msgid "Multi-function device"
-msgstr ""
+msgid "/Help/_About..."
+msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."
-#: ../../network/drakfirewall.pm:1
+#: standalone/logdrake:111
#, c-format
msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
+"_:this is the auth.log log file\n"
+"Authentication"
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/logdrake:112
#, c-format
-msgid "\t-Tape \n"
+msgid ""
+"_:this is the user.log log file\n"
+"User"
msgstr ""
-#: ../../standalone/drakhelp:1
+#: standalone/logdrake:113
#, c-format
msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+"_:this is the /var/log/messages log file\n"
+"Messages"
msgstr ""
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "ไม่มีรหัสผ่าน"
-
-#: ../../install_steps_gtk.pm:1
+#: standalone/logdrake:114
#, c-format
-msgid "due to unsatisfied %s"
+msgid ""
+"_:this is the /var/log/syslog log file\n"
+"Syslog"
msgstr ""
-#: ../../standalone/drakgw:1
+#: standalone/logdrake:118
#, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"
+msgid "search"
+msgstr "ค้นหา"
-#: ../../standalone/drakbackup:1
+#: standalone/logdrake:130
#, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "A tool to monitor your logs"
+msgstr "อุปกรณ์ตรวจสอบ logs"
-#: ../../printer/printerdrake.pm:1
+#: standalone/logdrake:131 standalone/net_monitor:85
#, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
+msgid "Settings"
+msgstr "ค่าติดตั้ง"
-#: ../../network/netconnect.pm:1
+#: standalone/logdrake:136
#, fuzzy, c-format
-msgid " cable"
-msgstr "Table"
+msgid "Matching"
+msgstr "matching"
-#: ../../help.pm:1 ../../install_interactive.pm:1
+#: standalone/logdrake:137
#, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
+msgid "but not matching"
+msgstr "but not matching"
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"
+#: standalone/logdrake:141
+#, c-format
+msgid "Choose file"
+msgstr "เลือก file"
-#: ../../Xconfig/various.pm:1
+#: standalone/logdrake:150
#, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "ไดร์เวอร์ XFree86: %s\n"
+msgid "Calendar"
+msgstr "ปฎิทิน"
-#: ../../printer/printerdrake.pm:1
+#: standalone/logdrake:160
#, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
+msgid "Content of the file"
+msgstr "ข้อความของ file"
+
+#: standalone/logdrake:164 standalone/logdrake:377
+#, c-format
+msgid "Mail alert"
msgstr ""
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: standalone/logdrake:171
#, c-format
-msgid "Choose the packages you want to install"
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง"
+msgid "The alert wizard had unexpectly failled:"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/logdrake:219
#, c-format
-msgid "Papua New Guinea"
+msgid "please wait, parsing file: %s"
+msgstr "โปรดกรุณารอ,parsing file:%s"
+
+#: standalone/logdrake:355
+#, c-format
+msgid "Apache World Wide Web Server"
msgstr ""
-#: ../../printer/main.pm:1
+#: standalone/logdrake:356
#, fuzzy, c-format
-msgid "Multi-function device on a parallel port"
-msgstr "ชื่อของเครื่องพิมพ์"
+msgid "Domain Name Resolver"
+msgstr "ชื่อโดเมน"
-#: ../../../move/tree/mdk_totem:1
+#: standalone/logdrake:357
#, fuzzy, c-format
-msgid "Busy files"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Ftp Server"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../keyboard.pm:1
+#: standalone/logdrake:358
#, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjani (cyrillic)"
+msgid "Postfix Mail Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#: ../../standalone/drakbackup:1
+#: standalone/logdrake:359
#, fuzzy, c-format
-msgid "Enter the directory where backups are stored"
-msgstr "กรุณาทดสอบเม้าส์"
+msgid "Samba Server"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
+#: standalone/logdrake:360
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "เซิร์ฟเวอร์ NIS"
-#: ../../printer/printerdrake.pm:1
+#: standalone/logdrake:361
#, fuzzy, c-format
-msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
+msgid "Webmin Service"
+msgstr "อุปกรณ์"
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The DHCP end range"
-msgstr ""
+#: standalone/logdrake:362
+#, fuzzy, c-format
+msgid "Xinetd Service"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#: ../../any.pm:1
+#: standalone/logdrake:372
+#, fuzzy, c-format
+msgid "Configure the mail alert system"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+
+#: standalone/logdrake:373
#, c-format
-msgid "Creating bootdisk..."
-msgstr "กำลังสร้างแผ่นบูต"
+msgid "Stop the mail alert system"
+msgstr ""
-#: ../../standalone/net_monitor:1
+#: standalone/logdrake:380
#, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "ทดสอบ connection..."
+msgid "Mail alert configuration"
+msgstr "การปรับแต่ง LAN"
-#: ../../install_interactive.pm:1
+#: standalone/logdrake:381
#, c-format
-msgid "Bringing down the network"
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
+msgstr ""
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "หมายเลขประจำตัวการล็อกอิน"
+#: standalone/logdrake:384
+#, fuzzy, c-format
+msgid "What do you want to do?"
+msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
-#: ../../services.pm:1
+#: standalone/logdrake:391
+#, fuzzy, c-format
+msgid "Services settings"
+msgstr "อุปกรณ์"
+
+#: standalone/logdrake:392
#, c-format
msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"You will receive an alert if one of the selected services is no longer "
+"running"
msgstr ""
-"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
-"มันให้การทำงานของNFS server "
-#: ../../standalone/drakconnect:1
+#: standalone/logdrake:399
+#, fuzzy, c-format
+msgid "Load setting"
+msgstr "ฟอร์แมต"
+
+#: standalone/logdrake:400
#, c-format
-msgid "DHCP Client"
-msgstr "DHCP Client"
+msgid "You will receive an alert if the load is higher than this value"
+msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/logdrake:401
#, c-format
msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"<span foreground=\"royalblue3\">Version:</span> %s\n"
-"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud &lt;"
-"tvignaud@mandrakesoft.com&gt;\n"
-"\n"
+"_: load here is a noun, the load of the system\n"
+"Load"
msgstr ""
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "dismiss"
-msgstr "เลิก"
+#: standalone/logdrake:406
+#, fuzzy, c-format
+msgid "Alert configuration"
+msgstr "การคอนฟิก"
-#: ../../printer/printerdrake.pm:1
+#: standalone/logdrake:407
#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+msgid "Please enter your email address below "
+msgstr "โปรดลองอีกครั้ง"
-#: ../../standalone/drakfloppy:1
+#: standalone/logdrake:408
#, c-format
-msgid "omit raid modules"
-msgstr "ยกเว้น raid modules"
+msgid "and enter the name (or the IP) of the SMTP server you whish to use"
+msgstr ""
+
+#: standalone/logdrake:427 standalone/logdrake:433
+#, fuzzy, c-format
+msgid "Congratulations"
+msgstr "ขอแสดงความยินดี"
-#: ../../services.pm:1
+#: standalone/logdrake:427
#, c-format
-msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+msgid "The wizard successfully configured the mail alert."
msgstr ""
-"lpd คือ print daemon ที่จำเป็นต้องมีถ้าต้องการให้ lpr ทำงานถูกต้อง\n"
-"ที่จริงแล้วมันคือ server ที่จัดการส่งงานพิมพ์ไปเครื่องพิมพ์"
-#: ../../keyboard.pm:1
+#: standalone/logdrake:433
#, c-format
-msgid "Irish"
+msgid "The wizard successfully disabled the mail alert."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/logdrake:492
#, c-format
-msgid "Sunday"
-msgstr "อาทิตย์"
+msgid "Save as.."
+msgstr "บันทึกแฟ้มเป็น"
-#: ../../standalone/drakconnect:1
+#: standalone/mousedrake:31
#, c-format
-msgid "Internet Connection Configuration"
-msgstr "การปรับแต่งการติดต่อเข้า internet"
+msgid "Please choose your mouse type."
+msgstr "คุณมีเม้าส์ชนิดใด"
-#: ../../modules/parameters.pm:1
+#: standalone/mousedrake:44
#, c-format
-msgid "comma separated numbers"
+msgid "Emulate third button?"
+msgstr "ต้องการจำลองเม้าส์ปุ่มที่สามด้วยหรือไม่?"
+
+#: standalone/mousedrake:61
+#, fuzzy, c-format
+msgid "Mouse test"
+msgstr "Mouse Systems"
+
+#: standalone/mousedrake:64
+#, fuzzy, c-format
+msgid "Please test your mouse:"
+msgstr "กรุณาทดสอบเม้าส์"
+
+#: standalone/net_monitor:51 standalone/net_monitor:56
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+
+#: standalone/net_monitor:91
+#, c-format
+msgid "Global statistics"
msgstr ""
-#: ../../standalone/harddrake2:1
+#: standalone/net_monitor:94
#, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+msgid "Instantaneous"
msgstr ""
-#: ../../standalone/drakperm:1
+#: standalone/net_monitor:94
#, c-format
-msgid "Move selected rule up one level"
+msgid "Average"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/net_monitor:95
#, fuzzy, c-format
msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+"Sending\n"
+"speed:"
+msgstr "บันทึกลงไฟล์"
-#: ../../printer/printerdrake.pm:1
+#: standalone/net_monitor:96
#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
+msgid ""
+"Receiving\n"
+"speed:"
+msgstr "บันทึกลงไฟล์"
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "I can't find any room for installing"
-msgstr "ผมไม่สามารถหาพื้นที่ว่างเพื่อทำการติดตั้ง"
+#: standalone/net_monitor:99
+#, fuzzy, c-format
+msgid ""
+"Connection\n"
+"time: "
+msgstr "ชนิดการเชื่อมต่อ"
-#: ../../printer/printerdrake.pm:1
+#: standalone/net_monitor:121
#, fuzzy, c-format
-msgid "Default printer"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Wait please, testing your connection..."
+msgstr "ทดสอบ connection..."
-#: ../../network/netconnect.pm:1
+#: standalone/net_monitor:149 standalone/net_monitor:162
+#, fuzzy, c-format
+msgid "Disconnecting from Internet "
+msgstr "ต่อเข้า Internet "
+
+#: standalone/net_monitor:149 standalone/net_monitor:162
+#, fuzzy, c-format
+msgid "Connecting to Internet "
+msgstr "ต่อเข้า Internet "
+
+#: standalone/net_monitor:193
+#, fuzzy, c-format
+msgid "Disconnection from Internet failed."
+msgstr "ต่อเข้า Internet "
+
+#: standalone/net_monitor:194
+#, fuzzy, c-format
+msgid "Disconnection from Internet complete."
+msgstr "ต่อเข้า Internet "
+
+#: standalone/net_monitor:196
+#, fuzzy, c-format
+msgid "Connection complete."
+msgstr "ชนิดการเชื่อมต่อ"
+
+#: standalone/net_monitor:197
#, c-format
msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
msgstr ""
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "แก้ไข RAID"
+#: standalone/net_monitor:295
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "การคอนฟิก"
-#: ../../network/isdn.pm:1
+#: standalone/net_monitor:343 standalone/net_monitor:363
#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr "ผมเจอการ์ด ISDN แบบ PCI แต่ผมไม่ทราบชนิด กรุณาเลือกหนื่งในการ์ด PCI ในหน้าต่อไป"
+msgid "sent: "
+msgstr ""
-#: ../../any.pm:1
+#: standalone/net_monitor:350 standalone/net_monitor:367
#, c-format
-msgid "Add user"
-msgstr "เพิ่มผู้ใช้"
+msgid "received: "
+msgstr ""
-#: ../../diskdrake/interactive.pm:1
+#: standalone/net_monitor:357
#, c-format
-msgid "RAID-disks %s\n"
-msgstr "ดิสก์แบบ RAID %s\n"
+msgid "average"
+msgstr ""
-#: ../../lang.pm:1
+#: standalone/net_monitor:360
#, fuzzy, c-format
-msgid "Liberia"
-msgstr "พอร์ตอนุกรม"
+msgid "Local measure"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/scannerdrake:1
+#: standalone/net_monitor:392
#, c-format
-msgid ""
-"Could not install the packages needed to set up a scanner with Scannerdrake."
+msgid "transmitted"
msgstr ""
-#: ../../standalone/drakgw:1
+#: standalone/net_monitor:393
#, c-format
-msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+msgid "received"
msgstr ""
-#: ../../steps.pm:1
+#: standalone/net_monitor:411
#, c-format
-msgid "Choose your keyboard"
-msgstr "เลือกคีย์บอร์ด"
+msgid ""
+"Warning, another internet connection has been detected, maybe using your "
+"network"
+msgstr ""
-#: ../../steps.pm:1
-#, c-format
-msgid "Format partitions"
-msgstr "ฟอร์แมตพาร์ติชั่น"
+#: standalone/net_monitor:417
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "ยกเลิกติดต่อ..."
-#: ../../printer/printerdrake.pm:1
+#: standalone/net_monitor:417
#, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
-msgstr "Boot Style Configuration"
+msgid "Connect %s"
+msgstr "เชื่อมต่ออยู่"
-#: ../../standalone/harddrake2:1
+#: standalone/net_monitor:422
#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "อ่าน CUPS drivers database..."
+msgid "No internet connection configured"
+msgstr "การปรับแต่งการติดต่อเข้า internet"
-#: ../../harddrake/v4l.pm:1
+#: standalone/printerdrake:70
+#, fuzzy, c-format
+msgid "Loading printer configuration... Please wait"
+msgstr "การคอนฟิก Internet"
+
+#: standalone/printerdrake:86
+#, fuzzy, c-format
+msgid "Reading data of installed printers..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+
+#: standalone/printerdrake:129
+#, fuzzy, c-format
+msgid "%s Printer Management Tool"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: standalone/printerdrake:143 standalone/printerdrake:144
+#: standalone/printerdrake:145 standalone/printerdrake:153
+#: standalone/printerdrake:154 standalone/printerdrake:158
+#, fuzzy, c-format
+msgid "/_Actions"
+msgstr "/_Options"
+
+#: standalone/printerdrake:143
+#, fuzzy, c-format
+msgid "/Set as _Default"
+msgstr " (Default)"
+
+#: standalone/printerdrake:144
+#, fuzzy, c-format
+msgid "/_Edit"
+msgstr "Ext2"
+
+#: standalone/printerdrake:145
+#, fuzzy, c-format
+msgid "/_Delete"
+msgstr "ลบ"
+
+#: standalone/printerdrake:146
+#, fuzzy, c-format
+msgid "/_Expert mode"
+msgstr "โหมดผู้เชี่ยวชาญ"
+
+#: standalone/printerdrake:151
#, c-format
-msgid "enable radio support"
+msgid "/_Refresh"
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/printerdrake:154
#, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
+msgid "/_Add Printer"
msgstr "เครื่องพิมพ์"
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback file name: %s"
+#: standalone/printerdrake:158
+#, fuzzy, c-format
+msgid "/_Configure CUPS"
+msgstr "คอนฟิกระบบ X"
-#: ../../printer/printerdrake.pm:1
+#: standalone/printerdrake:191
#, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid "Search:"
+msgstr "ค้นหา"
-#: ../../printer/printerdrake.pm:1
+#: standalone/printerdrake:194
#, c-format
-msgid "Do not transfer printers"
+msgid "Apply filter"
+msgstr ""
+
+#: standalone/printerdrake:212 standalone/printerdrake:219
+#, c-format
+msgid "Def."
msgstr ""
-#: ../../help.pm:1
+#: standalone/printerdrake:212 standalone/printerdrake:219
#, fuzzy, c-format
-msgid "Delay before booting the default image"
-msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"
+msgid "Printer Name"
+msgstr "ชื่อพรินต์คิว"
-#: ../../standalone/drakbackup:1
+#: standalone/printerdrake:212
#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Connection Type"
+msgstr "ชนิดการเชื่อมต่อ"
-#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Configure"
-msgstr "การปรับแต่ง"
+#: standalone/printerdrake:219
+#, fuzzy, c-format
+msgid "Server Name"
+msgstr "เซิร์ฟเวอร์"
-#: ../../standalone/scannerdrake:1
+#: standalone/printerdrake:225
#, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "เลือกกราฟฟิคการ์ด"
+msgid "Add Printer"
+msgstr "เครื่องพิมพ์"
+
+#: standalone/printerdrake:225
+#, fuzzy, c-format
+msgid "Add a new printer to the system"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: standalone/printerdrake:227
+#, fuzzy, c-format
+msgid "Set as default"
+msgstr "default"
+
+#: standalone/printerdrake:227
+#, fuzzy, c-format
+msgid "Set selected printer as the default printer"
+msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
+
+#: standalone/printerdrake:229
+#, fuzzy, c-format
+msgid "Edit selected printer"
+msgstr "ค้นพบ %s"
-#: ../../standalone/drakconnect:1
+#: standalone/printerdrake:231
+#, fuzzy, c-format
+msgid "Delete selected printer"
+msgstr "ลบคิว"
+
+#: standalone/printerdrake:233
+#, fuzzy, c-format
+msgid "Refresh"
+msgstr "ไม่ยอมรับ"
+
+#: standalone/printerdrake:233
+#, fuzzy, c-format
+msgid "Refresh the list"
+msgstr "ฟอร์แมต loopback file %s"
+
+#: standalone/printerdrake:235
+#, fuzzy, c-format
+msgid "Configure CUPS"
+msgstr "คอนฟิกระบบ X"
+
+#: standalone/printerdrake:235
+#, fuzzy, c-format
+msgid "Configure CUPS printing system"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+
+#: standalone/printerdrake:521
#, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Authors: "
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/printerdrake:527
+#, fuzzy, c-format
+msgid "Printer Management \n"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: standalone/scannerdrake:53
#, c-format
-msgid "Backup Users"
+msgid ""
+"Could not install the packages needed to set up a scanner with Scannerdrake."
msgstr ""
-#: ../../network/network.pm:1
+#: standalone/scannerdrake:54
#, c-format
-msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
+msgid "Scannerdrake will not be started now."
msgstr ""
-"โปรดใส่ชื่อของโฮสต์\n"
-"ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
-"ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
-"คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"
-#: ../../printer/printerdrake.pm:1
+#: standalone/scannerdrake:60 standalone/scannerdrake:452
#, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Searching for configured scanners ..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/drakboot:1
+#: standalone/scannerdrake:64 standalone/scannerdrake:456
#, fuzzy, c-format
-msgid "Create new theme"
-msgstr "สร้างพาร์ติชั่นใหม่"
+msgid "Searching for new scanners ..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../standalone/logdrake:1
+#: standalone/scannerdrake:72 standalone/scannerdrake:478
#, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Re-generating list of configured scanners ..."
msgstr ""
-#: ../../standalone/drakpxe:1
+#: standalone/scannerdrake:94 standalone/scannerdrake:135
+#: standalone/scannerdrake:149
+#, c-format
+msgid "The %s is not supported by this version of %s."
+msgstr ""
+
+#: standalone/scannerdrake:97
#, fuzzy, c-format
-msgid "No image found"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "%s found on %s, configure it automatically?"
+msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"
-#: ../../install_steps.pm:1
+#: standalone/scannerdrake:109
#, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+msgid "%s is not in the scanner database, configure it manually?"
msgstr ""
-"แพ็กเกจสำคัญบางอย่างไม่ได้ถูกติดตั้งอย่างเรียบร้อย\n"
-"cdrom หรือ cdrom drive ของคุณอาจมีการเสียหาย\n"
-"กรุณาตรวจสอบ cdrom ในเครื่องคอมพิวเตอร์ที่มีการติดตั้งแล้ว\n"
-"โดยใช้ \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
-#: ../advertising/06-development.pl:1
+#: standalone/scannerdrake:124
+#, fuzzy, c-format
+msgid "Select a scanner model"
+msgstr "เลือกกราฟฟิคการ์ด"
+
+#: standalone/scannerdrake:125
#, c-format
-msgid "Mandrake Linux 9.2: the ultimate development platform"
+msgid " ("
msgstr ""
-#: ../../standalone/scannerdrake:1
+#: standalone/scannerdrake:126
#, fuzzy, c-format
msgid "Detected model: %s"
msgstr "ค้นพบ %s"
-#: ../../standalone/logdrake:1
+#: standalone/scannerdrake:128
#, c-format
-msgid "\"%s\" is not a valid email!"
+msgid ", "
msgstr ""
-#: ../../standalone/drakedm:1
+#: standalone/scannerdrake:129
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Port"
+
+#: standalone/scannerdrake:155
#, c-format
-msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+msgid "The %s is not known by this version of Scannerdrake."
msgstr ""
-#: ../../security/help.pm:1
+#: standalone/scannerdrake:163 standalone/scannerdrake:177
#, c-format
-msgid "if set to yes, run the daily security checks."
+msgid "Do not install firmware file"
msgstr ""
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "Iranian"
+#: standalone/scannerdrake:167 standalone/scannerdrake:219
+#, c-format
+msgid ""
+"It is possible that your %s needs its firmware to be uploaded everytime when "
+"it is turned on."
+msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/scannerdrake:168 standalone/scannerdrake:220
#, c-format
-msgid "Device name to use for backup"
+msgid "If this is the case, you can make this be done automatically."
msgstr ""
-#: ../../standalone/drakbackup:1
+#: standalone/scannerdrake:169 standalone/scannerdrake:223
#, c-format
-msgid "No tape in %s!"
+msgid ""
+"To do so, you need to supply the firmware file for your scanner so that it "
+"can be installed."
msgstr ""
-#: ../../standalone/drakhelp:1
+#: standalone/scannerdrake:170 standalone/scannerdrake:224
#, c-format
msgid ""
-" --doc <link> - link to another web page ( for WM welcome "
-"frontend)\n"
+"You find the file on the CD or floppy coming with the scanner, on the "
+"manufacturer's home page, or on your Windows partition."
msgstr ""
-#: ../../keyboard.pm:1
+#: standalone/scannerdrake:172 standalone/scannerdrake:231
#, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Install firmware file from"
+msgstr ""
+
+#: standalone/scannerdrake:192
+#, fuzzy, c-format
+msgid "Select firmware file"
+msgstr "เลือกไฟล์"
-#: ../../standalone/harddrake2:1
+#: standalone/scannerdrake:195 standalone/scannerdrake:254
#, c-format
-msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
+msgid "The firmware file %s does not exist or is unreadable!"
msgstr ""
-#: ../../printer/printerdrake.pm:1
+#: standalone/scannerdrake:218
#, c-format
-msgid "How is the printer connected?"
-msgstr "เครื่องพิมพ์เชื่อมต่ออย่างไร?"
+msgid ""
+"It is possible that your scanners need their firmware to be uploaded "
+"everytime when they are turned on."
+msgstr ""
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+#: standalone/scannerdrake:222
+#, c-format
+msgid ""
+"To do so, you need to supply the firmware files for your scanners so that it "
+"can be installed."
+msgstr ""
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "ขนาดจอภาพ"
+#: standalone/scannerdrake:225
+#, c-format
+msgid ""
+"If you have already installed your scanner's firmware you can update the "
+"firmware here by supplying the new firmware file."
+msgstr ""
-#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, fuzzy, c-format
-msgid "Services"
-msgstr "อุปกรณ์"
+#: standalone/scannerdrake:227
+#, c-format
+msgid "Install firmware for the"
+msgstr ""
-#: ../../../move/move.pm:1
+#: standalone/scannerdrake:250
#, fuzzy, c-format
-msgid "Auto configuration"
-msgstr "การคอนฟิก"
+msgid "Select firmware file for the %s"
+msgstr "เลือกไฟล์"
-#: ../../Xconfig/card.pm:1
+#: standalone/scannerdrake:276
#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+msgid "The firmware file for your %s was successfully installed."
+msgstr ""
-#: ../../share/compssUsers:999
-msgid "Office Workstation"
-msgstr "Workstation ที่ทำงาน"
+#: standalone/scannerdrake:286
+#, c-format
+msgid "The %s is unsupported"
+msgstr ""
-#: ../../share/compssUsers:999
+#: standalone/scannerdrake:291
+#, c-format
msgid ""
-"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, "
-"gnumeric), pdf viewers, etc"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the %s Control Center in Hardware section."
msgstr ""
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Game station"
-msgstr "Workstation ที่ทำงาน"
+#: standalone/scannerdrake:295 standalone/scannerdrake:302
+#: standalone/scannerdrake:332
+#, fuzzy, c-format
+msgid "Auto-detect available ports"
+msgstr "ใช้ auto detection"
-#: ../../share/compssUsers:999
-msgid "Amusement programs: arcade, boards, strategy, etc"
+#: standalone/scannerdrake:297 standalone/scannerdrake:343
+#, c-format
+msgid "Please select the device where your %s is attached"
msgstr ""
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Multimedia station"
-msgstr "Multimedia - เขียน CD "
+#: standalone/scannerdrake:298
+#, c-format
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
+
+#: standalone/scannerdrake:300 standalone/scannerdrake:345
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "อุปกรณ์บูต"
-#: ../../share/compssUsers:999
-msgid "Sound and video playing/editing programs"
+#: standalone/scannerdrake:334
+#, fuzzy, c-format
+msgid "Searching for scanners ..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+
+#: standalone/scannerdrake:368
+#, c-format
+msgid ""
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
msgstr ""
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet station"
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+#: standalone/scannerdrake:392
+#, fuzzy, c-format
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
-#: ../../share/compssUsers:999
-#, fuzzy
+#: standalone/scannerdrake:393
+#, fuzzy, c-format
msgid ""
-"Set of tools to read and send mail and news (mutt, tin..) and to browse the "
-"Web"
-msgstr "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer (client)"
-msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"
+#: standalone/scannerdrake:396 standalone/scannerdrake:399
+#, c-format
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
-#: ../../share/compssUsers:999
-msgid "Clients for different protocols including ssh"
-msgstr "Clients for different protocols including ssh"
+#: standalone/scannerdrake:413
+#, fuzzy, c-format
+msgid "Search for new scanners"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Configuration"
-msgstr "การปรับแต่ง LAN"
+#: standalone/scannerdrake:419
+#, c-format
+msgid "Add a scanner manually"
+msgstr ""
-#: ../../share/compssUsers:999
-msgid "Tools to ease the configuration of your computer"
-msgstr "เครืองมือที่ช่วยในการปรับแต่งเครื่องชองคุณให้ง่ายขึ้น"
+#: standalone/scannerdrake:426
+#, fuzzy, c-format
+msgid "Install/Update firmware files"
+msgstr "เลือกไฟล์"
-#: ../../share/compssUsers:999
-msgid "Scientific Workstation"
-msgstr "Workstation ทางวิทยาศาสตร์"
+#: standalone/scannerdrake:432
+#, fuzzy, c-format
+msgid "Scanner sharing"
+msgstr "เครื่องพิมพ์"
-#: ../../share/compssUsers:999
-msgid "Scientific applications such as gnuplot"
+#: standalone/scannerdrake:491 standalone/scannerdrake:656
+#, fuzzy, c-format
+msgid "All remote machines"
+msgstr "เครื่องพิมพ์แบบรีโมท"
+
+#: standalone/scannerdrake:503 standalone/scannerdrake:806
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "matching"
+
+#: standalone/scannerdrake:543
+#, c-format
+msgid ""
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
msgstr ""
-#: ../../share/compssUsers:999
-msgid "Console Tools"
+#: standalone/scannerdrake:544
+#, c-format
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
msgstr ""
-#: ../../share/compssUsers:999
-msgid "Editors, shells, file tools, terminals"
+#: standalone/scannerdrake:547
+#, c-format
+msgid "The scanners on this machine are available to other computers"
msgstr ""
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "KDE Workstation"
-msgstr "Workstation ที่ทำงาน"
+#: standalone/scannerdrake:549
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "เครื่องพิมพ์"
-#: ../../share/compssUsers:999
-msgid ""
-"The K Desktop Environment, the basic graphical environment with a collection "
-"of accompanying tools"
+#: standalone/scannerdrake:563
+#, c-format
+msgid "Use scanners on remote computers"
msgstr ""
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Gnome Workstation"
-msgstr "Workstation ที่ทำงาน"
+#: standalone/scannerdrake:566
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
+
+#: standalone/scannerdrake:593 standalone/scannerdrake:665
+#: standalone/scannerdrake:815
+#, fuzzy, c-format
+msgid "Sharing of local scanners"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#: ../../share/compssUsers:999
+#: standalone/scannerdrake:594
+#, c-format
msgid ""
-"A graphical environment with user-friendly set of applications and desktop "
-"tools"
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
msgstr ""
-#: ../../share/compssUsers:999
-msgid "Other Graphical Desktops"
-msgstr "Graphical Desktops อื่นๆ"
+#: standalone/scannerdrake:605 standalone/scannerdrake:755
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "เพิ่มผู้ใช้"
-#: ../../share/compssUsers:999
-msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
+#: standalone/scannerdrake:611 standalone/scannerdrake:761
+#, fuzzy, c-format
+msgid "Edit selected host"
+msgstr "ค้นพบ %s"
+
+#: standalone/scannerdrake:620 standalone/scannerdrake:770
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "ลบคิว"
+
+#: standalone/scannerdrake:644 standalone/scannerdrake:652
+#: standalone/scannerdrake:657 standalone/scannerdrake:703
+#: standalone/scannerdrake:794 standalone/scannerdrake:802
+#: standalone/scannerdrake:807 standalone/scannerdrake:853
+#, c-format
+msgid "Name/IP address of host:"
msgstr ""
-#: ../../share/compssUsers:999
-msgid "C and C++ development libraries, programs and include files"
+#: standalone/scannerdrake:666 standalone/scannerdrake:816
+#, c-format
+msgid "Choose the host on which the local scanners should be made available:"
msgstr ""
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Documentation"
-msgstr "ตำแหน่ง"
+#: standalone/scannerdrake:677 standalone/scannerdrake:827
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "กรุณาทดสอบเม้าส์"
-#: ../../share/compssUsers:999
-msgid "Books and Howto's on Linux and Free Software"
+#: standalone/scannerdrake:688 standalone/scannerdrake:838
+#, c-format
+msgid "This host is already in the list, it cannot be added again.\n"
msgstr ""
-#: ../../share/compssUsers:999
-msgid "LSB"
-msgstr ""
+#: standalone/scannerdrake:743
+#, fuzzy, c-format
+msgid "Usage of remote scanners"
+msgstr "ใช้พื้นที่ที่ว่าง"
-#: ../../share/compssUsers:999
-msgid "Linux Standard Base. Third party applications support"
+#: standalone/scannerdrake:744
+#, c-format
+msgid "These are the machines from which the scanners should be used:"
msgstr ""
-#: ../../share/compssUsers:999
-msgid "Web/FTP"
+#: standalone/scannerdrake:904
+#, c-format
+msgid "Your scanner(s) will not be available on the network."
msgstr ""
-#: ../../share/compssUsers:999
-msgid "Apache, Pro-ftpd"
+#: standalone/service_harddrake:49
+#, c-format
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
msgstr ""
-#: ../../share/compssUsers:999
-msgid "Mail"
-msgstr ""
+#: standalone/service_harddrake:53
+#, fuzzy, c-format
+msgid "Some devices were added: %s\n"
+msgstr "ดีไวซ์ของเม้าส์: %s\n"
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Postfix mail server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+#: standalone/service_harddrake:94
+#, fuzzy, c-format
+msgid "Hardware probing in progress"
+msgstr "ค้นหาเจอบน port %s"
-#: ../../share/compssUsers:999
-msgid "Database"
-msgstr ""
+#: steps.pm:14
+#, c-format
+msgid "Language"
+msgstr "เลือกภาษาที่คุณใช้"
-#: ../../share/compssUsers:999
-msgid "PostgreSQL or MySQL database server"
+#: steps.pm:15
+#, c-format
+msgid "License"
msgstr ""
-#: ../../share/compssUsers:999
-msgid "Firewall/Router"
-msgstr ""
+#: steps.pm:16
+#, c-format
+msgid "Configure mouse"
+msgstr "คอนฟิกเม้าส์"
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Internet gateway"
-msgstr "การติดต่อ internet"
+#: steps.pm:17
+#, c-format
+msgid "Hard drive detection"
+msgstr "การตรวจหาฮาร์ดไดรว์"
-#: ../../share/compssUsers:999
-msgid "DNS/NIS "
-msgstr ""
+#: steps.pm:18
+#, c-format
+msgid "Select installation class"
+msgstr "เลือกชุดการติดตั้ง"
-#: ../../share/compssUsers:999
-msgid "Domain Name and Network Information Server"
-msgstr ""
+#: steps.pm:19
+#, c-format
+msgid "Choose your keyboard"
+msgstr "เลือกคีย์บอร์ด"
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Network Computer server"
-msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"
+#: steps.pm:21
+#, fuzzy, c-format
+msgid "Partitioning"
+msgstr "เครื่องพิมพ์"
-#: ../../share/compssUsers:999
-msgid "NFS server, SMB server, Proxy server, ssh server"
-msgstr ""
+#: steps.pm:22
+#, c-format
+msgid "Format partitions"
+msgstr "ฟอร์แมตพาร์ติชั่น"
-#: ../../share/compssUsers:999
-#, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"
+#: steps.pm:23
+#, c-format
+msgid "Choose packages to install"
+msgstr "เลือกแพ็คเก็จ"
-#~ msgid "The setup has already been done, and it's currently enabled."
-#~ msgstr "การปรับแต่งเรียบร้อยแล้วและตอนนี้ก็ได้ทำงานแล้ว"
+#: steps.pm:24
+#, c-format
+msgid "Install system"
+msgstr "ติดตั้งระบบ"
-#, fuzzy
-#~ msgid "Profile "
-#~ msgstr "Profile: "
+#: steps.pm:25
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "ไม่มีรหัสผ่าน"
-#, fuzzy
-#~ msgid ""
-#~ "Welcome to the Internet Connection Sharing utility!\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ "Click on Configure to launch the setup wizard."
-#~ msgstr ""
-#~ "ยินดีต้อนรับสู่เครื่องมือในการติดต่อ internet แบบ share\n"
-#~ "\n"
-#~ "%s\n"
-#~ "\n"
-#~ "กด ``Ok'' ถ้าคุณต้องการเริ่มการทำงานของ setup wizard"
+#: steps.pm:26
+#, c-format
+msgid "Add a user"
+msgstr "เพิ่มผู้ใช้"
-#, fuzzy
-#~ msgid "Internet Connection Sharing configuration"
-#~ msgstr "การเชื่อมต่อ Internet และการปรับแต่ง"
+#: steps.pm:27
+#, c-format
+msgid "Configure networking"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+
+#: steps.pm:28
+#, c-format
+msgid "Install bootloader"
+msgstr "ติดตั้งบูตโหลดเดอร์"
+
+#: steps.pm:29
+#, c-format
+msgid "Configure X"
+msgstr "คอนฟิกระบบ X"
+
+#: steps.pm:31
+#, c-format
+msgid "Configure services"
+msgstr "ปรับแต่งการบริการต่างๆ"
+
+#: steps.pm:32
+#, fuzzy, c-format
+msgid "Install updates"
+msgstr "ติดตั้งระบบ"
+
+#: steps.pm:33
+#, c-format
+msgid "Exit install"
+msgstr "ออกจากการติดตั้ง"
+
+#: ugtk2.pm:1047
+#, c-format
+msgid "Is this correct?"
+msgstr "ถูกต้องหรือไม่?"
+
+#: ugtk2.pm:1175
+#, c-format
+msgid "Expand Tree"
+msgstr "ขยาย tree"
+
+#: ugtk2.pm:1176
+#, c-format
+msgid "Collapse Tree"
+msgstr "ยุบ tree"
+
+#: ugtk2.pm:1177
+#, c-format
+msgid "Toggle between flat and group sorted"
+msgstr "เปลี่ยนไปมาระหว่างการจัดเรียงแบบ flat หรือ group"
-#~ msgid "No Internet Connection Sharing has ever been configured."
-#~ msgstr "ไม่มีการเชื่อมต่อกับ Internet แบบ sharing"
+#: wizards.pm:95
+#, c-format
+msgid ""
+"%s is not installed\n"
+"Click \"Next\" to install or \"Cancel\" to quit"
+msgstr ""
+
+#: wizards.pm:99
+#, fuzzy, c-format
+msgid "Installation failed"
+msgstr "เลือกชุดการติดตั้ง"
#, fuzzy
-#~ msgid "Hostname configuration"
+#~ msgid "Configuration of a remote printer"
#~ msgstr "การคอนฟิก"
#, fuzzy
-#~ msgid "Hostname"
-#~ msgstr "ชื่อโฮสต์:"
+#~ msgid "configure %s"
+#~ msgstr "คอนฟิกใหม่"
#, fuzzy
-#~ msgid "Remote Printers"
-#~ msgstr "เครื่องพิมพ์แบบรีโมท"
+#~ msgid "protocol = "
+#~ msgstr "Protocol"
#, fuzzy
-#~ msgid "Level 1"
+#~ msgid "level = "
#~ msgstr "ระดับ"
-#, fuzzy
-#~ msgid "Level 2"
-#~ msgstr "ระดับ"
+#~ msgid "Office Workstation"
+#~ msgstr "Workstation ที่ทำงาน"
#, fuzzy
-#~ msgid "Level 3"
-#~ msgstr "ระดับ"
+#~ msgid "Game station"
+#~ msgstr "Workstation ที่ทำงาน"
#, fuzzy
-#~ msgid "Level 4"
-#~ msgstr "ระดับ"
+#~ msgid "Multimedia station"
+#~ msgstr "Multimedia - เขียน CD "
#, fuzzy
-#~ msgid "Level 5"
-#~ msgstr "ระดับ"
+#~ msgid "Internet station"
+#~ msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
#, fuzzy
-#~ msgid "Insert floppy and press %s"
-#~ msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+#~ msgid ""
+#~ "Set of tools to read and send mail and news (mutt, tin..) and to browse "
+#~ "the Web"
+#~ msgstr ""
+#~ "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"
#, fuzzy
-#~ msgid "Load"
-#~ msgstr "ไอซ์แลนด์"
+#~ msgid "Network Computer (client)"
+#~ msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"
+
+#~ msgid "Clients for different protocols including ssh"
+#~ msgstr "Clients for different protocols including ssh"
#, fuzzy
-#~ msgid "Bad Ip"
-#~ msgstr "Card IO"
+#~ msgid "Configuration"
+#~ msgstr "การปรับแต่ง LAN"
-#~ msgid "Output"
-#~ msgstr "Output"
+#~ msgid "Tools to ease the configuration of your computer"
+#~ msgstr "เครืองมือที่ช่วยในการปรับแต่งเครื่องชองคุณให้ง่ายขึ้น"
-#~ msgid "Please relog into %s to activate the changes"
-#~ msgstr "กรุณาเข้าไปที่ %s อีกครั้งเพื่อเริ่มการเปลี่ยนแปลง"
+#~ msgid "Scientific Workstation"
+#~ msgstr "Workstation ทางวิทยาศาสตร์"
-#~ msgid "Expert Area"
-#~ msgstr "ส่วนของผู้เชี่ยวชาญ"
+#, fuzzy
+#~ msgid "KDE Workstation"
+#~ msgstr "Workstation ที่ทำงาน"
-#~ msgid "Wizard..."
-#~ msgstr "Wizard..."
+#, fuzzy
+#~ msgid "Gnome Workstation"
+#~ msgstr "Workstation ที่ทำงาน"
-#~ msgid "Name: %s\n"
-#~ msgstr "ชื่อ: %s\n"
+#~ msgid "Other Graphical Desktops"
+#~ msgstr "Graphical Desktops อื่นๆ"
-#~ msgid "Internet connection & configuration"
-#~ msgstr "การเชื่อมต่อ Internet และการปรับแต่ง"
+#, fuzzy
+#~ msgid "Documentation"
+#~ msgstr "ตำแหน่ง"
-#~ msgid ""
-#~ "\n"
-#~ "You can reconfigure your connection."
-#~ msgstr ""
-#~ "\n"
-#~ "คุณสามารถคอนฟิกระบบเน็ตเวิร์กใหม่"
+#, fuzzy
+#~ msgid "Postfix mail server"
+#~ msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-#~ msgid ""
-#~ "\n"
-#~ "You can connect to the Internet or reconfigure your connection."
-#~ msgstr ""
-#~ "\n"
-#~ "คุณสามารถเชื่อมต่อ Internet หรือทำการแก้ใขการเชื่อมต่อใหม่"
+#, fuzzy
+#~ msgid "Internet gateway"
+#~ msgstr "การติดต่อ internet"
-#~ msgid "You are not currently connected to the Internet."
-#~ msgstr "คุณยังไม่ได้ต่อกับ Internet อยู่"
+#, fuzzy
+#~ msgid "Network Computer server"
+#~ msgstr "เครื่องพิมพ์ในระบบ Network (Socket)"
-#~ msgid ""
-#~ "\n"
-#~ "You can disconnect or reconfigure your connection."
+#, fuzzy
+#~ msgid "Set of tools to read and send mail and news and to browse the Web"
#~ msgstr ""
-#~ "\n"
-#~ "คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
+#~ "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"
-#~ msgid "You are currently connected to the Internet."
-#~ msgstr "คุณติดต่อกับ Internet อยู่"
+#, fuzzy
+#~ msgid "add"
+#~ msgstr "เพิ่ม"
-#~ msgid "Multimedia - CD Burning"
-#~ msgstr "Multimedia - เขียน CD "
+#, fuzzy
+#~ msgid "edit"
+#~ msgstr "Ext2"
-#~ msgid "Tools to create and burn CD's"
-#~ msgstr "เครื่องมือในการทำ CD"
+#, fuzzy
+#~ msgid "remove"
+#~ msgstr "เครื่องพิมพ์แบบรีโมท"
-#~ msgid "Tools for your Palm Pilot or your Visor"
-#~ msgstr "เครื่องมือสำหรับ Palm Pilot หรือ Visor"
+#, fuzzy
+#~ msgid "Add an UPS device"
+#~ msgstr "เพิ่มผู้ใช้"
-#~ msgid "Personal Finance"
-#~ msgstr "การเงินส่วนตัว"
+#, fuzzy
+#~ msgid "Autodetection"
+#~ msgstr "ใช้ auto detection"
-#~ msgid "Programs to manage your finances, such as gnucash"
-#~ msgstr "โปรแกรมที่ช่วยจัดการเรื่องการเงิน เช่น gnucash"
+#, fuzzy
+#~ msgid "No new UPS devices was found"
+#~ msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-#~ msgid "no network card found"
-#~ msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+#, fuzzy
+#~ msgid "UPS driver configuration"
+#~ msgstr "การคอนฟิก Internet"
-#~ msgid ""
-#~ "Please enter your host name if you know it.\n"
-#~ "Some DHCP servers require the hostname to work.\n"
-#~ "Your host name should be a fully-qualified host name,\n"
-#~ "such as ``mybox.mylab.myco.com''."
-#~ msgstr ""
-#~ "โปรดใส่ชื่อของโฮสต์\n"
-#~ "ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
-#~ "ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
-#~ "คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"
+#, fuzzy
+#~ msgid "Please select your UPS model."
+#~ msgstr "กรุณาทดสอบเม้าส์"
-#~ msgid "DrakFloppy Error: %s"
-#~ msgstr "ข้อผิดพลาด DrakFloppy: %s"
+#, fuzzy
+#~ msgid "Name:"
+#~ msgstr "ชื่อ: "
-#~ msgid "Launch Aurora at boot time"
-#~ msgstr "รัน Aurora ขณะ boot"
+#, fuzzy
+#~ msgid "Port:"
+#~ msgstr "Port"
-#~ msgid "Traditional Gtk+ Monitor"
-#~ msgstr "Gtk+ Monitor ทั่วไป"
+#, fuzzy
+#~ msgid "The port on which is connected your ups"
+#~ msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
-#~ msgid "Traditional Monitor"
-#~ msgstr "จอภาพทั่วไป"
+#, fuzzy
+#~ msgid "UPS devices"
+#~ msgstr "อุปกรณ์"
-#~ msgid "NewStyle Monitor"
-#~ msgstr "จอภาพชนิดใหม่"
+#, fuzzy
+#~ msgid "UPS users"
+#~ msgstr "ชื่อผู้ใช้"
-#~ msgid "NewStyle Categorizing Monitor"
-#~ msgstr "NewStyle Categorizing Monitor"
+#, fuzzy
+#~ msgid "Action"
+#~ msgstr "/_Options"
-#~ msgid ""
-#~ "The partition you've selected to add as root (/) is physically located "
-#~ "beyond\n"
-#~ "the 1024th cylinder of the hard drive, and you have no /boot partition.\n"
-#~ "If you plan to use the LILO boot manager, be careful to add a /boot "
-#~ "partition"
-#~ msgstr ""
-#~ "พาร์ติชั่นที่คุณเลือกให้เป็น root (/) มีการกำหนดทางกายภาพให้มีขนาดเกิน\n"
-#~ "ไซลินเดอร์ที่ 1024 ของฮาร์ดดิสก์ และคุณไม่มีพาร์ติชั่น /boot\n"
-#~ "ถ้าคุณต้องการใช้ LILO เป็นบูตแมเนเจอร์ โปรดระมัดระวังในการเพิ่มพาร์ติชั่น /boot"
+#, fuzzy
+#~ msgid "ACL name"
+#~ msgstr "ชื่อ LVM"
-#~ msgid ""
-#~ "Sorry I won't accept to create /boot so far onto the drive (on a cylinder "
-#~ "> 1024).\n"
-#~ "Either you use LILO and it won't work, or you don't use LILO and you "
-#~ "don't need /boot"
-#~ msgstr ""
-#~ "ขออภัย โปรแกรมไม่สามารถสร้าง /boot บนไดรฟ์ (ที่มีขนาดไซลินเดอร์มากกว่า 1024)\n"
-#~ "หรือคุณใช้ LILO และโปรแกรมไม่ทำงาน หรือคุณไม่ได้ใช้ LILO และคุณไม่ต้องการ /boot"
+#, fuzzy
+#~ msgid "Welcome to the UPS configuration tools"
+#~ msgstr "ทดสอบการคอนฟิก"
-#~ msgid "Please be patient. This operation can take several minutes."
-#~ msgstr "กรุณาอดทนรอสักครู่ การทำงานอาจใช้เวลาหลายนาที"
+#, fuzzy
+#~ msgid "Running \"%s\" ..."
+#~ msgstr "อ่าน CUPS drivers database..."
+
+#, fuzzy
+#~ msgid "Messages"
+#~ msgstr "ข้อความ"
+
+#, fuzzy
+#~ msgid "Syslog"
+#~ msgstr "syslog"
-#~ msgid "Test ports"
-#~ msgstr "กำลังตรวจสอบพอร์ต"
+#~ msgid "Compact"
+#~ msgstr "แบบอัด (Compact)"
-#~ msgid "Formatting partitions"
-#~ msgstr "ฟอร์แมตพาร์ติชั่น"
+#, fuzzy
+#~ msgid "Next ->"
+#~ msgstr "Next"
-#~ msgid "Formatting loopback file %s"
-#~ msgstr "ฟอร์แมต loopback file %s"
+#, fuzzy
+#~ msgid "<- Previous"
+#~ msgstr "ก่อน"
-#~ msgid "Formatting"
-#~ msgstr "ฟอร์แมต"
+#, fuzzy
+#~ msgid "Next->"
+#~ msgstr "Next"