diff options
Diffstat (limited to 'perl-install/share/po/ms.po')
| -rw-r--r-- | perl-install/share/po/ms.po | 18177 |
1 files changed, 18177 insertions, 0 deletions
diff --git a/perl-install/share/po/ms.po b/perl-install/share/po/ms.po new file mode 100644 index 000000000..111a51e3a --- /dev/null +++ b/perl-install/share/po/ms.po @@ -0,0 +1,18177 @@ +# DrakX Bahasa Melayu (Malay) (ms). +# Copyright (C) 2003 Free Software Foundation, Inc. +# Sharuzzaman Ahmat Raslan <sharuzzaman@myrealbox.com>, 2003 +# +msgid "" +msgstr "" +"Project-Id-Version: DrakX\n" +"POT-Creation-Date: 2003-09-09 17:07+0200\n" +"PO-Revision-Date: 2003-08-20 19:30+0800\n" +"Last-Translator: Sharuzzaman Ahmat Raslan <sharuzzaman@myrealbox.com>\n" +"Language-Team: Malay <translation-team-ms@lists.sourceforge.net>\n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=UTF-8\n" +"Content-Transfer-Encoding: 8bit\n" +"X-Generator: KBabel 1.0\n" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Scanning partitions to find mount points" +msgstr "Mengimbas partisyen untuk mencari titik lekapan" + +#: ../../security/help.pm:1 +#, c-format +msgid "if set to yes, check additions/removals of suid root files." +msgstr "jika tetap kepada ya, periksa penambahan/pembuangan fail suid root." + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, " +"0/1 for Local Config...\n" +msgstr "" +"%s: %s memerlukan namahos, alamat MAC, IP, imej-nbi, 0/1 untuk THIN_CLIENT, " +"0/1 untuk Local Config...\n" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Configuration changed - restart clusternfs/dhcpd?" +msgstr "Konfigurasi berubah - mulakan semula clusternfs/dhcpd?" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\t\tErase=%s" +msgstr "\t\tPadam=%s" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"Differential backups only save files that have changed or are new since the " +"original 'base' backup." +msgstr "" +"Backup berkala hanya menyimpan fail yang telah berubah atau baru semenjak " +"backup 'induk' asal" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "network printer port" +msgstr "port pencetak rangkaian" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Please insert floppy disk:" +msgstr "Sila masukkan cakera liut:" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "DrakTermServ" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "PCMCIA" +msgstr "PCMCIA" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "" +"The backup partition table has not the same size\n" +"Still continue?" +msgstr "" +"Jadual partisyen backup tidak mempunyai saiz yang sama\n" +"Masih teruskan?" + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, c-format +msgid "Which username" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Which type of entry do you want to add?" +msgstr "" + +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Restore partition table" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Configure hostname..." +msgstr "Internet." + +#: ../../printer/cups.pm:1 +#, c-format +msgid "On CUPS server \"%s\"" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Post-install configuration" +msgstr "" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "" +"The current security level is %s\n" +"Select permissions to see/edit" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Use ``%s'' instead" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1 +#, c-format +msgid "Type" +msgstr "Jenis" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Also printers configured with the PPD files provided by their manufacturers " +"or with native CUPS drivers cannot be transferred." +msgstr "fail." + +#: ../../lang.pm:1 +#, c-format +msgid "Sri Lanka" +msgstr "Sri Lanka" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"The following printer\n" +"\n" +"%s%s\n" +"are directly connected to your system" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Central African Republic" +msgstr "Republik Afrika Tengah" + +#: ../../network/network.pm:1 +#, c-format +msgid "Gateway device" +msgstr "Peranti gateway" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "Advanced preferences" +msgstr "Keutamaan lanjutan" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Net Method:" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Ethernetcard" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "If set, send the mail report to this email address else send it to root" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Parameters" +msgstr "Parameter" + +#: ../../standalone/draksec:1 +#, c-format +msgid "no" +msgstr "tidak" + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "Auto-detect" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Interface:" +msgstr "Antaramuka:" + +#: ../../steps.pm:1 +#, c-format +msgid "Select installation class" +msgstr "" + +#: ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "" +"The system doesn't seem to be connected to the Internet.\n" +"Try to reconfigure your connection." +msgstr "Internet." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Connect your printer to a Linux server and let your Windows machine(s) " +"connect to it as a client.\n" +"\n" +"Do you really want to continue setting up this printer as you are doing now?" +msgstr "Sambung dan Tetingkap?" + +#: ../../lang.pm:1 +#, c-format +msgid "Belarus" +msgstr "Belarus" + +#: ../../partition_table.pm:1 +#, c-format +msgid "Error writing to file %s" +msgstr "Ralat menulis kepada fail %s" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Report check result to syslog" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"apmd is used for monitoring battery status and logging it via syslog.\n" +"It can also be used for shutting down the machine when the battery is low." +msgstr "dan." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use tape to backup" +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "The following packages are going to be installed" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "CUPS configuration" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Total progress" +msgstr "Jumlah" + +#: ../../lang.pm:1 +#, c-format +msgid "Hong Kong" +msgstr "Hong Kong" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Not enough free space to allocate new partitions" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Moving" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"Drakbackup activities via %s:\n" +"\n" +msgstr "" + +#: ../../standalone/draksec:1 +#, c-format +msgid "yes" +msgstr "ya" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "(" +msgstr "" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "" +"Welcome to The Network Configuration Wizard.\n" +"\n" +"We are about to configure your internet/network connection.\n" +"If you don't want to use the auto detection, deselect the checkbox.\n" +msgstr "Selamat Datang Rangkaian Konfigurasikan" + +#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 +#, c-format +msgid ")" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Lebanon" +msgstr "Lebanon" + +#: ../../mouse.pm:1 +#, c-format +msgid "MM HitTablet" +msgstr "" + +#: ../../services.pm:1 +#, c-format +msgid "Stop" +msgstr "Henti" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Edit selected host" +msgstr "Edit hos dipilih" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "No CD device defined!" +msgstr "Tidak!" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "\tUse .backupignore files\n" +msgstr "fail" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Bulgarian (phonetic)" +msgstr "" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "The DHCP start ip" +msgstr "DHCP mula" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "256 kB" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Don't rewind tape after backup" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Bootloader main options" +msgstr "PemuatBoot utama" + +#: ../../standalone.pm:1 +#, c-format +msgid "" +"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-" +"usbtable] [--dynamic=dev]" +msgstr "" + +#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1 +#, c-format +msgid "Tape" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Malaysia" +msgstr "Malaysia" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Scanning network..." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"With this option you will be able to restore any version\n" +" of your /etc directory." +msgstr "" +"\n" +" direktori." + +#: ../../standalone/drakedm:1 +#, fuzzy, c-format +msgid "The change is done, do you want to restart the dm service ?" +msgstr "siap ulanghidup?" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Swiss (French layout)" +msgstr "Swiss (susunatur Perancis)" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "August" +msgstr "" + +#: ../../raid.pm:1 +#, c-format +msgid "mkraid failed (maybe raidtools are missing?)" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Webcam" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "size of the (second level) cpu cache" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Soundcard" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Month" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Search for files to restore" +msgstr "Cari fail" + +#: ../../lang.pm:1 +#, c-format +msgid "Luxembourg" +msgstr "Luxembourg" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To print a file from the command line (terminal window) use the command \"%s " +"<file>\".\n" +msgstr "Kepada fail<file>" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Level %s\n" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Syriac (phonetic)" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Iran" +msgstr "Iran" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Bus" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Iraq" +msgstr "Iraq" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Potential LAN address conflict found in current config of %s!\n" +msgstr "dalam" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Configuring..." +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The setup has already been done, and it's currently enabled." +msgstr "siap dan dihidupkan." + +#: ../../harddrake/v4l.pm:1 +#, fuzzy, c-format +msgid "" +"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" +"detect the rights parameters.\n" +"If your card is misdetected, you can force the right tuner and card types " +"here. Just select your tv card parameters if needed." +msgstr "dan." + +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Password (again)" +msgstr "Katalaluan" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Search installed fonts" +msgstr "Cari" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Default desktop" +msgstr "Default" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Venezuela" +msgstr "Venezuela" + +#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "IP address" +msgstr "Alamat IP" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Choose the sizes" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"List of data corrupted:\n" +"\n" +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "" +"Can only be mounted explicitly (i.e.,\n" +"the -a option will not cause the file system to be mounted)." +msgstr "terpasang fail terpasang." + +#: ../../network/modem.pm:1 +#, c-format +msgid "" +"Your modem isn't supported by the system.\n" +"Take a look at http://www.linmodems.org" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Choose another partition" +msgstr "" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Current user" +msgstr "" + +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Username" +msgstr "Namapengguna" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Left \"Windows\" key" +msgstr "Kiri Tetingkap" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Guyana" +msgstr "Guyana" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "dhcpd Server Configuration" +msgstr "Pelayan" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "" +"Used for directory:\n" +" only owner of directory or file in this directory can delete it" +msgstr "" +"direktori\n" +" direktori fail dalam direktori" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid " on Novell server \"%s\", printer \"%s\"" +msgstr "on" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Printer Name" +msgstr "Giliran" + +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "Remove a module" +msgstr "Buang" + +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Password" +msgstr "Katalaluan" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Advanced Configuration" +msgstr "Lanjutan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Scanning on your HP multi-function device" +msgstr "on" + +#: ../../any.pm:1 +#, c-format +msgid "Root" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Choose an existing RAID to add to" +msgstr "RAD" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Turkish (modern \"Q\" model)" +msgstr "Turki" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Lilo message not found" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Automatic regeneration of kernel header in /boot for\n" +"/usr/include/linux/{autoconf,version}.h" +msgstr "dalam" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "if needed" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore Failed..." +msgstr "Gagal." + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "/Autodetect _jazz drives" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Store the password for this system in drakbackup configuration." +msgstr "dalam." + +#: ../../install_messages.pm:1 +#, fuzzy, c-format +msgid "" +"Introduction\n" +"\n" +"The operating system and the different components available in the Mandrake " +"Linux distribution \n" +"shall be called the \"Software Products\" hereafter. The Software Products " +"include, but are not \n" +"restricted to, the set of programs, methods, rules and documentation related " +"to the operating \n" +"system and the different components of the Mandrake Linux distribution.\n" +"\n" +"\n" +"1. License Agreement\n" +"\n" +"Please read this document carefully. This document is a license agreement " +"between you and \n" +"MandrakeSoft S.A. which applies to the Software Products.\n" +"By installing, duplicating or using the Software Products in any manner, you " +"explicitly \n" +"accept and fully agree to conform to the terms and conditions of this " +"License. \n" +"If you disagree with any portion of the License, you are not allowed to " +"install, duplicate or use \n" +"the Software Products. \n" +"Any attempt to install, duplicate or use the Software Products in a manner " +"which does not comply \n" +"with the terms and conditions of this License is void and will terminate " +"your rights under this \n" +"License. Upon termination of the License, you must immediately destroy all " +"copies of the \n" +"Software Products.\n" +"\n" +"\n" +"2. Limited Warranty\n" +"\n" +"The Software Products and attached documentation are provided \"as is\", " +"with no warranty, to the \n" +"extent permitted by law.\n" +"MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " +"law, be liable for any special,\n" +"incidental, direct or indirect damages whatsoever (including without " +"limitation damages for loss of \n" +"business, interruption of business, financial loss, legal fees and penalties " +"resulting from a court \n" +"judgment, or any other consequential loss) arising out of the use or " +"inability to use the Software \n" +"Products, even if MandrakeSoft S.A. has been advised of the possibility or " +"occurence of such \n" +"damages.\n" +"\n" +"LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " +"COUNTRIES\n" +"\n" +"To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " +"in no circumstances, be \n" +"liable for any special, incidental, direct or indirect damages whatsoever " +"(including without \n" +"limitation damages for loss of business, interruption of business, financial " +"loss, legal fees \n" +"and penalties resulting from a court judgment, or any other consequential " +"loss) arising out \n" +"of the possession and use of software components or arising out of " +"downloading software components \n" +"from one of Mandrake Linux sites which are prohibited or restricted in some " +"countries by local laws.\n" +"This limited liability applies to, but is not restricted to, the strong " +"cryptography components \n" +"included in the Software Products.\n" +"\n" +"\n" +"3. The GPL License and Related Licenses\n" +"\n" +"The Software Products consist of components created by different persons or " +"entities. Most \n" +"of these components are governed under the terms and conditions of the GNU " +"General Public \n" +"Licence, hereafter called \"GPL\", or of similar licenses. Most of these " +"licenses allow you to use, \n" +"duplicate, adapt or redistribute the components which they cover. Please " +"read carefully the terms \n" +"and conditions of the license agreement for each component before using any " +"component. Any question \n" +"on a component license should be addressed to the component author and not " +"to MandrakeSoft.\n" +"The programs developed by MandrakeSoft S.A. are governed by the GPL License. " +"Documentation written \n" +"by MandrakeSoft S.A. is governed by a specific license. Please refer to the " +"documentation for \n" +"further details.\n" +"\n" +"\n" +"4. Intellectual Property Rights\n" +"\n" +"All rights to the components of the Software Products belong to their " +"respective authors and are \n" +"protected by intellectual property and copyright laws applicable to software " +"programs.\n" +"MandrakeSoft S.A. reserves its rights to modify or adapt the Software " +"Products, as a whole or in \n" +"parts, by all means and for all purposes.\n" +"\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " +"MandrakeSoft S.A. \n" +"\n" +"\n" +"5. Governing Laws \n" +"\n" +"If any portion of this agreement is held void, illegal or inapplicable by a " +"court judgment, this \n" +"portion is excluded from this contract. You remain bound by the other " +"applicable sections of the \n" +"agreement.\n" +"The terms and conditions of this License are governed by the Laws of " +"France.\n" +"All disputes on the terms of this license will preferably be settled out of " +"court. As a last \n" +"resort, the dispute will be referred to the appropriate Courts of Law of " +"Paris - France.\n" +"For any question on this document, please contact MandrakeSoft S.A. \n" +msgstr "" +"Pengenalan dan dalam dan dan dan A dalam dan dan dalam dan dan dan tidak A " +"dalam tidak dan dan keluar A A dalam tidak keluar dan keluar dalam lokal " +"dalam dan dan Umum dan A Dokumentasi A Kanan: dan dan A dalam dan dan A dan " +"Perancis on keluar Perancis on A" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Default user" +msgstr "Default" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "" +"the progress bar x coordinate\n" +"of its upper left corner" +msgstr "" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Current interface configuration" +msgstr "" + +#: ../../printer/data.pm:1 +#, c-format +msgid "LPD - Line Printer Daemon" +msgstr "" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"If you have an ISA card, the values on the next screen should be right.\n" +"\n" +"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your " +"card.\n" +msgstr "on dan" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Do not print any test page" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Gurmukhi" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "%s already in use\n" +msgstr "dalam" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Force No APIC" +msgstr "Tidak" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "This password is too short (it must be at least %d characters long)" +msgstr "" + +#: ../../standalone.pm:1 +#, c-format +msgid "[keyboard]" +msgstr "" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "FTP proxy" +msgstr "FTP" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Install List" +msgstr "Install" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Change\n" +"Restore Path" +msgstr "Ubah" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Show only for the selected day" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\tLimit disk usage to %s MB\n" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "512 kB" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Logs" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "(Note: Parallel ports cannot be auto-detected)" +msgstr "port" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "<control>N" +msgstr "" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "What kind of card do you have?" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "<control>O" +msgstr "" + +#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 +#, fuzzy, c-format +msgid "Security" +msgstr "Keselamatan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"You can also use the graphical interface \"xpdq\" for setting options and " +"handling printing jobs.\n" +"If you are using KDE as desktop environment you have a \"panic button\", an " +"icon on the desktop, labeled with \"STOP Printer!\", which stops all print " +"jobs immediately when you click it. This is for example useful for paper " +"jams.\n" +msgstr "dan KDE on" + +#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../standalone/printerdrake:1 +#, c-format +msgid "<control>Q" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Unable to find backups to restore...\n" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Unknown" +msgstr "Entah" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "This server is already in the list, it cannot be added again.\n" +msgstr "dalam" + +#: ../../network/netconnect.pm:1 ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "Network Configuration" +msgstr "Konfigurasi Rangkaian" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "<control>S" +msgstr "" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "" +"Protocol for the rest of the world\n" +"No D-Channel (leased lines)" +msgstr "Protokol Saluran" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Option %s must be a number!" +msgstr "" + +#: ../../standalone/drakboot:1 ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Notice" +msgstr "Notis" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "You have not configured X. Are you sure you really want this?" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The configuration of the printer will work fully automatically. If your " +"printer was not correctly detected or if you prefer a customized printer " +"configuration, turn on \"Manual configuration\"." +msgstr "on." + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "What type of partitioning?" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"file list sent by FTP: %s\n" +" " +msgstr "fail FTP " + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Interface" +msgstr "Antaramuka" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Multisession CD" +msgstr "" + +#: ../../modules/parameters.pm:1 +#, c-format +msgid "comma separated strings" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "These are the machines from which the scanners should be used:" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Messages" +msgstr "" + +#: ../../harddrake/v4l.pm:1 +#, fuzzy, c-format +msgid "Unknown|CPH06X (bt878) [many vendors]" +msgstr "Entah" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "POP and IMAP Server" +msgstr "dan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Mexico" +msgstr "Mexico" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Model stepping" +msgstr "Model" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Rwanda" +msgstr "Rwanda" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Switzerland" +msgstr "Switzerland" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Brunei Darussalam" +msgstr "Brunei Darussalam" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "Do you have any %s interfaces?" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "You must be root to read configuration file. \n" +msgstr "fail" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Remote lpd Printer Options" +msgstr "lpd" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"GNU/Linux is a multi-user system, meaning each user may have their own\n" +"preferences, their own files and so on. You can read the ``Starter Guide''\n" +"to learn more about multi-user systems. But unlike \"root\", who is the\n" +"system administrator, the users you add at this point will not be\n" +"authorized to change anything except their own files and their own\n" +"configurations, protecting the system from unintentional or malicious\n" +"changes that impact on the system as a whole. You will have to create at\n" +"least one regular user for yourself -- this is the account which you should\n" +"use for routine, day-to-day use. Although it is very easy to log in as\n" +"\"root\" to do anything and everything, it may also be very dangerous! A\n" +"very simple mistake could mean that your system will not work any more. If\n" +"you make a serious mistake as a regular user, the worst that will happen is\n" +"that you will lose some information, but not affect the entire system.\n" +"\n" +"The first field asks you for a real name. Of course, this is not mandatory\n" +"-- you can actually enter whatever you like. DrakX will use the first word\n" +"you typed in this field and copy it to the \"%s\" field, which is the name\n" +"this user will enter to log onto the system. If you like, you may override\n" +"the default and change the username. The next step is to enter a password.\n" +"From a security point of view, a non-privileged (regular) user password is\n" +"not as crucial as the \"root\" password, but that is no reason to neglect\n" +"it by making it blank or too simple: after all, your files could be the\n" +"ones at risk.\n" +"\n" +"Once you click on \"%s\", you can add other users. Add a user for each one\n" +"of your friends: your father or your sister, for example. Click \"%s\" when\n" +"you have finished adding users.\n" +"\n" +"Clicking the \"%s\" button allows you to change the default \"shell\" for\n" +"that user (bash by default).\n" +"\n" +"When you have finished adding users, you will be asked to choose a user\n" +"that can automatically log into the system when the computer boots up. If\n" +"you are interested in that feature (and do not care much about local\n" +"security), choose the desired user and window manager, then click \"%s\".\n" +"If you are not interested in this feature, uncheck the \"%s\" box." +msgstr "" +"pengguna pengguna fail dan on pengguna fail dan on pengguna dalam dan A " +"pengguna dalam dan pengguna default dan pengguna tidak fail on Tambah " +"pengguna default pengguna default pengguna dalam dan lokal pengguna dan " +"dalam." + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Configure Internet Access..." +msgstr "Internet." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Please choose the time interval between each backup" +msgstr "" + +#: ../../crypto.pm:1 ../../lang.pm:1 +#, fuzzy, c-format +msgid "Norway" +msgstr "Norway" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Delete profile" +msgstr "Padam" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Danish" +msgstr "Danish" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Automatically switch on numlock key locker under console\n" +"and XFree at boot." +msgstr "on." + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "" +"Please enter the IP configuration for this machine.\n" +"Each item should be entered as an IP address in dotted-decimal\n" +"notation (for example, 1.2.3.4)." +msgstr "IP IP dalam." + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n" +"knows if a selected package is located on another CD-ROM so it will eject\n" +"the current CD and ask you to insert the correct CD as required." +msgstr "on on dan." + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "When checked, owner and group won't be changed" +msgstr "dan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bulgaria" +msgstr "Bulgaria" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Tuesday" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Processors" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Svalbard and Jan Mayen Islands" +msgstr "Svalbard and Jan Mayen Islands" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "No NIC selected!" +msgstr "Tidak!" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "" +"Problems occured during configuration.\n" +"Test your connection via net_monitor or mcc. If your connection doesn't " +"work, you might want to relaunch the configuration." +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "partition %s is now known as %s" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup Other files..." +msgstr "Lain-lain fail." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Congo (Kinshasa)" +msgstr "Kongo" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "SMB server IP" +msgstr "SMB" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Partition table of drive %s is going to be written to disk!" +msgstr "Partisyen!" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Installing HPOJ package..." +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"A custom bootdisk provides a way of booting into your Linux system without\n" +"depending on the normal bootloader. This is useful if you don't want to " +"install\n" +"LILO (or grub) on your system, or another operating system removes LILO, or " +"LILO doesn't\n" +"work with your hardware configuration. A custom bootdisk can also be used " +"with\n" +"the Mandrake rescue image, making it much easier to recover from severe " +"system\n" +"failures. Would you like to create a bootdisk for your system?\n" +"%s" +msgstr "A on normal on A" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +" DrakBackup Daemon Report\n" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Latvian" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "monthly" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "Module name" +msgstr "Modul" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Start at boot" +msgstr "Mula" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use Incremental Backups" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "First sector of drive (MBR)" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "El Salvador" +msgstr "El Salvador" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Joystick" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "DVD" +msgstr "" + +#: ../../any.pm:1 ../../help.pm:1 +#, c-format +msgid "Use Unicode by default" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "the module of the GNU/Linux kernel that handles the device" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Trying to rescue partition table" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Option %s must be an integer number!" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Use password to authenticate users" +msgstr "" + +#: ../../interactive/stdio.pm:1 +#, c-format +msgid "" +"Entries you'll have to fill:\n" +"%s" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"For backups to other media, files are still created on the hard drive, then " +"moved to the other media. Enabling this option will remove the hard drive " +"tar files after the backup." +msgstr "fail on fail." + +#: ../../standalone/livedrake:1 +#, fuzzy, c-format +msgid "Unable to start live upgrade !!!\n" +msgstr "mula" + +#: ../../install_steps_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Name: " +msgstr "Nama: " + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "16 million colors (24 bits)" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Allow all users" +msgstr "" + +#: ../../share/advertising/08-store.pl:1 +#, c-format +msgid "The official MandrakeSoft Store" +msgstr "" + +#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Resizing" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Enter the maximum size\n" +" allowed for Drakbackup (MB)" +msgstr "Enter\n" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "Cable connection" +msgstr "" + +#: ../../standalone/drakperm:1 ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "User" +msgstr "Pengguna" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Do new backup before restore (only for incremental backups.)" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Name" +msgstr "Nama" + +#: ../../raid.pm:1 +#, c-format +msgid "mkraid failed" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Button 3 Emulation" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Check additions/removals of sgid files" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Sending files..." +msgstr "fail." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Israeli (Phonetic)" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "access to rpm tools" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "You must choose/enter a printer/device!" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Permission problem accessing CD." +msgstr "" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Phone number" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "Error: The \"%s\" driver for your sound card is unlisted" +msgstr "Ralat" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer name, description, location" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "USA (broadcast)" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Use Xinerama extension" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Loopback" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "West Europe" +msgstr "Barat" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "On CD-R" +msgstr "pada CDROM" + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "" +"[OPTIONS] [PROGRAM_NAME]\n" +"\n" +"OPTIONS:\n" +" --help - print this help message.\n" +" --report - program should be one of mandrake tools\n" +" --incident - program should be one of mandrake tools" +msgstr "" +"NAMA\n" +"\n" +"\n" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Harddrake2 version %s" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "Preferences" +msgstr "Keutamaan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Swaziland" +msgstr "Swaziland" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Dominican Republic" +msgstr "Republik Dominica" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Copying %s" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "Choose color" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Syriac" +msgstr "" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Set-UID" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Choose the hard drive you want to erase in order to install your new\n" +"Mandrake Linux partition. Be careful, all data present on this partition\n" +"will be lost and will not be recoverable!" +msgstr "dalam on dan!" + +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 +#, fuzzy, c-format +msgid "Use the %c and %c keys for selecting which entry is highlighted." +msgstr "dan." + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Enable \"%s\" to execute the file" +msgstr "" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "Generic 2 Button Mouse" +msgstr "Generik" + +#: ../../lvm.pm:1 +#, fuzzy, c-format +msgid "Remove the logical volumes first\n" +msgstr "Buang" + +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 +#, fuzzy, c-format +msgid "The highlighted entry will be booted automatically in %d seconds." +msgstr "dalam saat." + +#: ../../standalone/drakboot:1 +#, c-format +msgid "" +"Can't write /etc/sysconfig/bootsplash\n" +"File not found." +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Internet access" +msgstr "Internet" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "" +"y coordinate of text box\n" +"in number of characters" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To get a list of the options available for the current printer click on the " +"\"Print option list\" button." +msgstr "Kepada on." + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Enabling servers..." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printing test page(s)..." +msgstr "Cetakan." + +#: ../../fsedit.pm:1 +#, c-format +msgid "There is already a partition with mount point %s\n" +msgstr "" + +#: ../../security/help.pm:1 +#, c-format +msgid "Enable/Disable msec hourly security check." +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"At this point, you need to decide where you want to install the Mandrake\n" +"Linux operating system on your hard drive. If your hard drive is empty or\n" +"if an existing operating system is using all the available space you will\n" +"have to partition the drive. Basically, partitioning a hard drive consists\n" +"of logically dividing it to create the space needed to install your new\n" +"Mandrake Linux system.\n" +"\n" +"Because the process of partitioning a hard drive is usually irreversible\n" +"and can lead to lost data if there is an existing operating system already\n" +"installed on the drive, partitioning can be intimidating and stressful if\n" +"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n" +"simplifies this process. Before continuing with this step, read through the\n" +"rest of this section and above all, take your time.\n" +"\n" +"Depending on your hard drive configuration, several options are available:\n" +"\n" +" * \"%s\": this option will perform an automatic partitioning of your blank\n" +"drive(s). If you use this option there will be no further prompts.\n" +"\n" +" * \"%s\": the wizard has detected one or more existing Linux partitions on\n" +"your hard drive. If you want to use them, choose this option. You will then\n" +"be asked to choose the mount points associated with each of the partitions.\n" +"The legacy mount points are selected by default, and for the most part it's\n" +"a good idea to keep them.\n" +"\n" +" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n" +"all the space available on it, you will have to create free space for\n" +"Linux. To do so, you can delete your Microsoft Windows partition and data\n" +"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n" +"partition. Resizing can be performed without the loss of any data, provided\n" +"you have previously defragmented the Windows partition and that it uses the\n" +"FAT format. Backing up your data is strongly recommended.. Using this\n" +"option is recommended if you want to use both Mandrake Linux and Microsoft\n" +"Windows on the same computer.\n" +"\n" +" Before choosing this option, please understand that after this\n" +"procedure, the size of your Microsoft Windows partition will be smaller\n" +"then when you started. You will have less free space under Microsoft\n" +"Windows to store your data or to install new software.\n" +"\n" +" * \"%s\": if you want to delete all data and all partitions present on\n" +"your hard drive and replace them with your new Mandrake Linux system,\n" +"choose this option. Be careful, because you will not be able to undo your\n" +"choice after you confirm.\n" +"\n" +" !! If you choose this option, all data on your disk will be deleted. !!\n" +"\n" +" * \"%s\": this will simply erase everything on the drive and begin fresh,\n" +"partitioning everything from scratch. All data on your disk will be lost.\n" +"\n" +" !! If you choose this option, all data on your disk will be lost. !!\n" +"\n" +" * \"%s\": choose this option if you want to manually partition your hard\n" +"drive. Be careful -- it is a powerful but dangerous choice and you can very\n" +"easily lose all your data. That's why this option is really only\n" +"recommended if you have done something like this before and have some\n" +"experience. For more instructions on how to use the DiskDrake utility,\n" +"refer to the ``Managing Your Partitions '' section in the ``Starter\n" +"Guide''." +msgstr "" +"on kosong on dan pengguna dan on\n" +" tidak\n" +" on default dan\n" +" Tetingkap on dan on Kepada Tetingkap dan Tetingkap Tetingkap dan dan on\n" +" Tetingkap\n" +" dan on dan\n" +" on\n" +" on dan Semua on\n" +" on\n" +" secara manual dan siap dan on dalam." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Ukraine" +msgstr "Ukraine" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Application:" +msgstr "" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "External ISDN modem" +msgstr "Luaran" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, report check result by mail." +msgstr "ya." + +#: ../../interactive/stdio.pm:1 +#, fuzzy, c-format +msgid "Your choice? (default %s) " +msgstr "default " + +#: ../../harddrake/sound.pm:1 +#, c-format +msgid "Trouble shooting" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Test page(s) have been sent to the printer.\n" +"It may take some time before the printer starts.\n" +"Printing status:\n" +"%s\n" +"\n" +msgstr "Ujian" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "daily" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "and one unknown printer" +msgstr "dan tidak diketahui" + +#: ../../lang.pm:1 ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "Ireland" +msgstr "Ireland" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid " Restore Configuration " +msgstr "" + +#: ../../Xconfig/test.pm:1 +#, c-format +msgid "Is this the correct setting?" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"You will now set up your Internet/network connection. If you wish to\n" +"connect your computer to the Internet or to a local network, click \"%s\".\n" +"Mandrake Linux will attempt to autodetect network devices and modems. If\n" +"this detection fails, uncheck the \"%s\" box. You may also choose not to\n" +"configure the network, or to do it later, in which case clicking the \"%s\"\n" +"button will take you to the next step.\n" +"\n" +"When configuring your network, the available connections options are:\n" +"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n" +"simple LAN connection (Ethernet).\n" +"\n" +"We will not detail each configuration option - just make sure that you have\n" +"all the parameters, such as IP address, default gateway, DNS servers, etc.\n" +"from your Internet Service Provider or system administrator.\n" +"\n" +"You can consult the ``Starter Guide'' chapter about Internet connections\n" +"for details about the configuration, or simply wait until your system is\n" +"installed and use the program described there to configure your connection." +msgstr "" +"Internet Internet lokal dan dalam dan IP default Internet Internet dan." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Wizard Configuration" +msgstr "" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "Autoprobe" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"if set to yes, check for :\n" +"\n" +"- empty passwords,\n" +"\n" +"- no password in /etc/shadow\n" +"\n" +"- for users with the 0 id other than root." +msgstr "ya kosong tidak dalam." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup system files..." +msgstr "fail." + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Can't use broadcast with no NIS domain" +msgstr "tidak NIS" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Removing printer \"%s\"..." +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Shell history size" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "drakfloppy" +msgstr "" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "" +"Please indicate where the auto_install.cfg file is located.\n" +"\n" +"Leave it blank if you do not want to set up automatic installation mode.\n" +"\n" +msgstr "fail" + +#: ../../printer/cups.pm:1 ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Configured on other machines" +msgstr "Tidak" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "information level that can be obtained through the cpuid instruction" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Peru" +msgstr "Peru" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " on device: %s" +msgstr "on" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Remove Windows(TM)" +msgstr "Buang Tetingkap" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Starts the X Font Server (this is mandatory for XFree to run)." +msgstr "Font Pelayan." + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +"Most of these values were extracted\n" +"from your running system.\n" +"You can modify as needed." +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Select the font file or directory and click on 'Add'" +msgstr "fail direktori dan on Tambah" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Madagascar" +msgstr "Madagascar" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Urpmi" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Cron not available yet as non-root" +msgstr "" + +#: ../../install_steps_interactive.pm:1 ../../services.pm:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "System" +msgstr "Sistem" + +#: ../../any.pm:1 ../../help.pm:1 +#, c-format +msgid "Do you want to use this feature?" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Arabic" +msgstr "Arab" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +"- Options:\n" +msgstr "Pilihan" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Password required" +msgstr "Katalaluan" + +#: ../../common.pm:1 +#, c-format +msgid "%d minutes" +msgstr "" + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, fuzzy, c-format +msgid "Graphics card: %s" +msgstr "Grafik" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "WebDAV transfer failed!" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "XFree configuration" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Choose action" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "French Polynesia" +msgstr "French Polynesia" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Usually, DrakX has no problems detecting the number of buttons on your\n" +"mouse. If it does, it assumes you have a two-button mouse and will\n" +"configure it for third-button emulation. The third-button mouse button of a\n" +"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n" +"right mouse buttons. DrakX will automatically know whether your mouse uses\n" +"a PS/2, serial or USB interface.\n" +"\n" +"If for some reason you wish to specify a different type of mouse, select it\n" +"from the list provided.\n" +"\n" +"If you choose a mouse other than the default, a test screen will be\n" +"displayed. Use the buttons and wheel to verify that the settings are\n" +"correct and that the mouse is working correctly. If the mouse is not\n" +"working well, press the space bar or [Return] key to cancel the test and to\n" +"go back to the list of choices.\n" +"\n" +"Wheel mice are occasionally not detected automatically, so you will need to\n" +"select your mouse from a list. Be sure to select the one corresponding to\n" +"the port that your mouse is attached to. After selecting a mouse and\n" +"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n" +"the mouse wheel to ensure that it is activated correctly. Once you see the\n" +"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n" +"buttons and check that the mouse pointer moves on-screen as you move your\n" +"mouse." +msgstr "tidak on dan dan bersiri USB default dan dan dan dan on dan on." + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Support the OKI 4w and compatible winprinters." +msgstr "dan." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Files or wildcards listed in a .backupignore file at the top of a directory " +"tree will not be backed up." +msgstr "dalam fail direktori." + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system" +msgstr "Lanjutan Bunyi" + +#. -PO: the first %s is the card type (scsi, network, sound,...) +#. -PO: the second is the vendor+model name +#: ../../modules/interactive.pm:1 +#, c-format +msgid "Installing driver for %s card %s" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"You have transferred your former default printer (\"%s\"), Should it be also " +"the default printer under the new printing system %s?" +msgstr "default default?" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Enable Server" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Ukrainian" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The network access was not running and could not be started. Please check " +"your configuration and your hardware. Then try to configure your remote " +"printer again." +msgstr "dan dan." + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Enable \"%s\" to write the file" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Please insert the Boot floppy used in drive %s" +msgstr "dalam" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, c-format +msgid "Local network(s)" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Remove Windows" +msgstr "Buang" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "" +"Your %s has been configured.\n" +"You may now scan documents using \"XSane\" from Multimedia/Graphics in the " +"applications menu." +msgstr "Multimedia Grafik dalam." + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Firewire controllers" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"After you have configured the general bootloader parameters, the list of\n" +"boot options that will be available at boot time will be displayed.\n" +"\n" +"If there are other operating systems installed on your machine they will\n" +"automatically be added to the boot menu. You can fine-tune the existing\n" +"options by clicking \"%s\" to create a new entry; selecting an entry and\n" +"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n" +"changes.\n" +"\n" +"You may also not want to give access to these other operating systems to\n" +"anyone who goes to the console and reboots the machine. You can delete the\n" +"corresponding entries for the operating systems to remove them from the\n" +"bootloader menu, but you will need a boot disk in order to boot those other\n" +"operating systems!" +msgstr "on dan dan dalam!" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "System mode" +msgstr "Sistem" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To print on a NetWare printer, you need to provide the NetWare print server " +"name (Note! it may be different from its TCP/IP hostname!) as well as the " +"print queue name for the printer you wish to access and any applicable user " +"name and password." +msgstr "Kepada on IP dan pengguna dan." + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Netmask:" +msgstr "Netmask:" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "Do it later" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Append" +msgstr "Tambah" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Refresh printer list (to display all available remote CUPS printers)" +msgstr "Segarkan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"When this option is turned on, on every startup of CUPS it is automatically " +"made sure that\n" +"\n" +"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n" +"\n" +"- if /etc/cups/cupsd.conf is missing, it will be created\n" +"\n" +"- when printer information is broadcasted, it does not contain \"localhost\" " +"as the server name.\n" +"\n" +"If some of these measures lead to problems for you, turn this option off, " +"but then you have to take care of these points." +msgstr "on on off." + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"The auto install can be fully automated if wanted,\n" +"in that case it will take over the hard drive!!\n" +"(this is meant for installing on another box).\n" +"\n" +"You may prefer to replay the installation.\n" +msgstr "on" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Network printer \"%s\", port %s" +msgstr "Rangkaian" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"Please choose what network adapter will be connected to your Local Area " +"Network." +msgstr "Rangkaian." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "OK to restore the other files." +msgstr "OK fail." + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Please choose your keyboard layout." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer Device URI" +msgstr "Peranti RAID" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Not erasable media!" +msgstr "" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Terminal-based" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Enable/Disable IP spoofing protection." +msgstr "IP." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Installing a printing system in the %s security level" +msgstr "dalam" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "The user name is too long" +msgstr "pengguna" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Other OS (windows...)" +msgstr "Lain-lain" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "WebDAV remote site already in sync!" +msgstr "dalam!" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Reading printer database..." +msgstr "Membaca." + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Generate auto install floppy" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\t\t user name: %s\n" +"\t\t on path: %s \n" +msgstr "pengguna on" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Somalia" +msgstr "Somalia" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "No open source driver" +msgstr "Tidak" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "Def." +msgstr "" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "" +"This is similar to the previous level, but the system is entirely closed and " +"security features are at their maximum." +msgstr "dan." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Nicaragua" +msgstr "Nicaragua" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "New Caledonia" +msgstr "New Caledonia" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "European protocol (EDSS1)" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_Delete" +msgstr "Hapus" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Video mode" +msgstr "Video" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Oman" +msgstr "Oman" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Please enter your email address below " +msgstr "" + +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Network Monitoring" +msgstr "Rangkaian" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "SunOS" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "New size in MB: " +msgstr "Baru dalam " + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Partition table type: %s\n" +msgstr "Partisyen" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Authentication Windows Domain" +msgstr "Pengesahan Tetingkap" + +#: ../../keyboard.pm:1 +#, c-format +msgid "US keyboard" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Buttons emulation" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid ", network printer \"%s\", port %s" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"Drakbackup activities via tape:\n" +"\n" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +" FTP connection problem: It was not possible to send your backup files by " +"FTP.\n" +msgstr "" +"\n" +" FTP fail FTP" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Sending Speed:" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "" +"The classic bug sound tester is to run the following commands:\n" +"\n" +"\n" +"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card uses\n" +"by default\n" +"\n" +"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n" +"currently uses\n" +"\n" +"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n" +"loaded or not\n" +"\n" +"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n" +"tell you if sound and alsa services're configured to be run on\n" +"initlevel 3\n" +"\n" +"- \"aumix -q\" will tell you if the sound volume is muted or not\n" +"\n" +"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n" +msgstr "default dan dan on" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Halt bug" +msgstr "" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Mail alert configuration" +msgstr "Mel" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Tokelau" +msgstr "Tokelau" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Matching" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Bosnian" +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Release: " +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Connection speed" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Namibia" +msgstr "Namibia" + +#: ../../services.pm:1 +#, c-format +msgid "Database Server" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "special capacities of the driver (burning ability and or DVD support)" +msgstr "dan" + +#: ../../raid.pm:1 +#, fuzzy, c-format +msgid "Can't add a partition to _formatted_ RAID md%d" +msgstr "RAD" + +#: ../../Xconfig/card.pm:1 +#, fuzzy, c-format +msgid "" +"Your card can have 3D hardware acceleration support but only with XFree %s,\n" +"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" +"Your card is supported by XFree %s which may have a better support in 2D." +msgstr "dalam." + +#: ../../standalone/draksec:1 +#, c-format +msgid "Please wait, setting security options..." +msgstr "" + +#: ../../harddrake/v4l.pm:1 +#, fuzzy, c-format +msgid "Unknown|CPH05X (bt878) [many vendors]" +msgstr "Entah" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Launch the graphical environment when your system starts" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "hourly" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Right Shift key" +msgstr "Kanan Shif" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " Successfuly Restored on %s " +msgstr "on " + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Making printer port available for CUPS..." +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Antigua and Barbuda" +msgstr "dan" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "" +"!!! Indicates the password in the system database is different than\n" +" the one in the Terminal Server database.\n" +"Delete/re-add the user to the Terminal Server to enable login." +msgstr "" +"dalam\n" +" dalam Pelayan pengguna Pelayan." + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Spanish" +msgstr "Spanyol" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Start" +msgstr "Mula" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Direct root login" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Configuring applications..." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard will help you to install your printer(s) connected to this " +"computer, connected directly to the network or to a remote Windows machine.\n" +"\n" +"Please plug in and turn on all printers connected to this machine so that it/" +"they can be auto-detected. Also your network printer(s) and your Windows " +"machines must be connected and turned on.\n" +"\n" +"Note that auto-detecting printers on the network takes longer than the auto-" +"detection of only the printers connected to this machine. So turn off the " +"auto-detection of network and/or Windows-hosted printers when you don't need " +"it.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " +"to set up your printer(s) now." +msgstr "" +"Tetingkap dalam dan on dan Tetingkap dan on on off dan Tetingkap\n" +" on Berikutnya dan on Batal." + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "Normal modem connection" +msgstr "" + +#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "File Selection" +msgstr "Fail" + +#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1 +#, c-format +msgid "CUPS" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Erase tape before backup" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Run config tool" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Bootloader installation" +msgstr "PemuatBoot" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Root partition size in MB: " +msgstr "dalam " + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "This is a mandatory package, it can't be unselected" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Etherboot ISO image is %s" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"named (BIND) is a Domain Name Server (DNS) that is used to resolve host " +"names to IP addresses." +msgstr "Domain Nama Pelayan IP." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Saint Lucia" +msgstr "Saint Lucia" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "November" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Disconnect..." +msgstr "Putus." + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Report" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Palau" +msgstr "Palau" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "level" +msgstr "" + +#: ../../share/advertising/13-mdkexpert_corporate.pl:1 +#, fuzzy, c-format +msgid "" +"All incidents will be followed up by a single qualified MandrakeSoft " +"technical expert." +msgstr "Semua tunggal." + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Package Group Selection" +msgstr "Pemilihan Kumpulan Pakej" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "" +"Allow local hardware\n" +"configuration." +msgstr "lokal." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore Via Network Protocol: %s" +msgstr "Rangkaian Protokol" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "You can configure each parameter of the module here." +msgstr "" + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, fuzzy, c-format +msgid "Choose the resolution and the color depth" +msgstr "dan" + +#: ../../standalone/mousedrake:1 +#, c-format +msgid "Emulate third button?" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"You can't create a new partition\n" +"(since you reached the maximal number of primary partitions).\n" +"First remove a primary partition and create an extended partition." +msgstr "dan." + +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, c-format +msgid "Mount" +msgstr "" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Creating auto install floppy" +msgstr "Mencipta" + +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Install updates" +msgstr "Install" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "text box height" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "State" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "Be sure a media is present for the device %s" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Enable multiple profiles" +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "Do not interpret character or block special devices on the file system." +msgstr "on fail." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"These options can backup and restore all files in your /etc directory.\n" +msgstr "dan fail dalam direktori" + +#: ../../printer/main.pm:1 +#, c-format +msgid "Local printer" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Files Restored..." +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Package selection" +msgstr "Pakej" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Mauritania" +msgstr "Mauritania" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"I can keep your current configuration and assume you already set up a DHCP " +"server; in that case please verify I correctly read the Network that you use " +"for your local network; I will not reconfigure it and I will not touch your " +"DHCP server configuration.\n" +"\n" +"The default DNS entry is the Caching Nameserver configured on the firewall. " +"You can replace that with your ISP DNS IP, for example.\n" +"\t\t \n" +"Otherwise, I can reconfigure your interface and (re)configure a DHCP server " +"for you.\n" +"\n" +msgstr "" +"dan DHCP dalam Rangkaian lokal dan DHCP default Pelayan Nama on IP dan DHCP" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"No local printer found! To manually install a printer enter a device name/" +"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., " +"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB " +"printer: /dev/usb/lp1, ...)." +msgstr "Tidak lokal Kepada secara manual fail dalam USB USB." + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "All primary partitions are used" +msgstr "Semua" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "LPD server \"%s\", printer \"%s\"" +msgstr "on" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "" +"After this is done, we recommend that you restart your X environment to " +"avoid any hostname-related problems." +msgstr "siap ulanghidup." + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Automatic detection and configuration of hardware at boot." +msgstr "dan." + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "Installation Server Configuration" +msgstr "Pelayan" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Configuring IDE" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Network functionality not configured" +msgstr "Rangkaian" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Configure module" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Cocos (Keeling) Islands" +msgstr "Kepulauan Cocos (Keeling)" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "You'll need to reboot before the modification can take place" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Provider phone number" +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Host %s" +msgstr "Hos" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Fiji" +msgstr "Fiji" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Armenia" +msgstr "Armenia" + +#: ../../any.pm:1 +#, c-format +msgid "Second floppy drive" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "About Harddrake" +msgstr "Perihal" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Authorize TCP connections to X Window" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Drive capacity" +msgstr "Pemacu" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Insert a floppy in drive\n" +"All data on this floppy will be lost" +msgstr "dalam on" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Size: %s" +msgstr "Saiz" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Control and Shift keys simultaneously" +msgstr "dan Shif" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "secondary" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "View Backup Configuration." +msgstr "Konfigurasikan." + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, report check result to syslog." +msgstr "ya." + +#. -PO: keep this short or else the buttons will not fit in the window +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "No password" +msgstr "Tidak" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Nigeria" +msgstr "Nigeria" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "%s: %s requires hostname...\n" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "There is no existing partition to use" +msgstr "tidak" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "" +"The following scanners\n" +"\n" +"%s\n" +"are available on your system.\n" +msgstr "on" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Multi-function device on parallel port #%s" +msgstr "on" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To print to a TCP or socket printer, you need to provide the host name or IP " +"of the printer and optionally the port number (default is 9100). On HP " +"JetDirect servers the port number is usually 9100, on other servers it can " +"vary. See the manual of your hardware." +msgstr "Kepada soket IP dan default on." + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Hard drive information" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Russian" +msgstr "Russia" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Jordan" +msgstr "Jordan" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Hide files" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Auto-detect printers connected to this machine" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "" +"XawTV isn't installed!\n" +"\n" +"\n" +"If you do have a TV card but DrakX has neither detected it (no bttv nor " +"saa7134\n" +"module in \"/etc/modules\") nor installed xawtv, please send the\n" +"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n" +"with subject \"undetected TV card\".\n" +"\n" +"\n" +"You can install it by typing \"urpmi xawtv\" as root, in a console." +msgstr "tidak dalam dalam." + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Sorry, no floppy drive available" +msgstr "tidak" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bolivia" +msgstr "Bolivia" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Set up your Windows server to make the printer available under the IPP " +"protocol and set up printing from this machine with the \"%s\" connection " +"type in Printerdrake.\n" +"\n" +msgstr "Tetingkap dan dalam" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Bad package" +msgstr "" + +#: ../../share/advertising/07-server.pl:1 +#, fuzzy, c-format +msgid "" +"Transform your computer into a powerful Linux server: Web server, mail, " +"firewall, router, file and print server (etc.) are just a few clicks away!" +msgstr "fail dan!" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "DrakSec Basic Options" +msgstr "Asas" + +#: ../../standalone/draksound:1 +#, fuzzy, c-format +msgid "" +"\n" +"\n" +"\n" +"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig " +"program. Just type \"sndconfig\" in a console." +msgstr "dalam." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Romania" +msgstr "Romania" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Group" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Canada" +msgstr "Kanada" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "choose device" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Remove from LVM" +msgstr "Buang" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Timezone" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "German" +msgstr "Jerman" + +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 +#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Next ->" +msgstr "Berikutnya" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Turning on this allows to print plain text files in japanese language. Only " +"use this function if you really want to print text in japanese, if it is " +"activated you cannot print accentuated characters in latin fonts any more " +"and you will not be able to adjust the margins, the character size, etc. " +"This setting only affects printers defined on this machine. If you want to " +"print japanese text on a printer set up on a remote machine, you have to " +"activate this function on that remote machine." +msgstr "on biasa fail dalam dalam dalam dan on on on on." + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Chances are, this partition is\n" +"a Driver partition. You should\n" +"probably leave it alone.\n" +msgstr "Jurupacu" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Guinea-Bissau" +msgstr "Guinea-Bissau" + +#: ../../Xconfig/monitor.pm:1 +#, c-format +msgid "Horizontal refresh rate" +msgstr "" + +#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Edit" +msgstr "Edit" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "" +"Can't unset mount point as this partition is used for loop back.\n" +"Remove the loopback first" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The network configuration done during the installation cannot be started " +"now. Please check whether the network is accessable after booting your " +"system and correct the configuration using the Mandrake Control Center, " +"section \"Network & Internet\"/\"Connection\", and afterwards set up the " +"printer, also using the Mandrake Control Center, section \"Hardware\"/" +"\"Printer\"" +msgstr "siap dan Rangkaian Internet dan Perkakasan" + +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "USB controllers" +msgstr "USB" + +#: ../../Xconfig/various.pm:1 +#, c-format +msgid "What norm is your TV using?" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Type:" +msgstr "Jenis:" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Share name" +msgstr "Kongsi" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "enable" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "" +"Contacting Mandrake Linux web site to get the list of available mirrors..." +msgstr "" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "" +"A problem occured while restarting the network: \n" +"\n" +"%s" +msgstr "A" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Remove the loopback file?" +msgstr "Buang fail?" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Selected size is larger than available space" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "NCP server name missing!" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Please choose your country." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Hard Disk Backup files..." +msgstr "fail." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Laotian" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Samoa" +msgstr "Samoa" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"The rstat protocol allows users on a network to retrieve\n" +"performance metrics for any machine on that network." +msgstr "on on." + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Re-generating list of configured scanners ..." +msgstr "" + +#: ../../modules/interactive.pm:1 +#, fuzzy, c-format +msgid "Module configuration" +msgstr "Bunyi" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Scanner" +msgstr "" + +#: ../../Xconfig/test.pm:1 +#, fuzzy, c-format +msgid "Warning: testing this graphic card may freeze your computer" +msgstr "Amaran" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"The user name must contain only lower cased letters, numbers, `-' and `_'" +msgstr "pengguna dan" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Menudrake" +msgstr "" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "Welcome To Crackers" +msgstr "Selamat Datang Kepada" + +#: ../../modules/interactive.pm:1 +#, fuzzy, c-format +msgid "Module options:" +msgstr "Modul:" + +#: ../../share/advertising/11-mnf.pl:1 +#, fuzzy, c-format +msgid "Secure your networks with the Multi Network Firewall" +msgstr "Rangkaian" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Go on without configuring the network" +msgstr "Pergi ke on" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "Abort" +msgstr "Abai" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "No password prompt on %s at port %s" +msgstr "Tidak on" + +#: ../../mouse.pm:1 +#, c-format +msgid "Kensington Thinking Mouse with Wheel emulation" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Usage of remote scanners" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Your Windows partition is too fragmented. Please reboot your computer under " +"Windows, run the ``defrag'' utility, then restart the Mandrake Linux " +"installation." +msgstr "Tetingkap Tetingkap ulanghidup." + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Dvorak (Norwegian)" +msgstr "Norwegian" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Hard Disk Backup Progress..." +msgstr "" + +#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 +#, c-format +msgid "Unable to fork: %s" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Type: " +msgstr "Jenis " + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "<-- Edit Client" +msgstr "Edit" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "no fonts found" +msgstr "tidak" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Mouse" +msgstr "Tetikus" + +#: ../../bootloader.pm:1 +#, fuzzy, c-format +msgid "not enough room in /boot" +msgstr "dalam" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Liechtenstein" +msgstr "Liechtenstein" + +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Host name" +msgstr "Hos" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "the color of the progress bar" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Suppress Fonts Files" +msgstr "Font" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Add to RAID" +msgstr "Tambah" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"You can add additional entries in yaboot for other operating systems,\n" +"alternate kernels, or for an emergency boot image.\n" +"\n" +"For other OSs, the entry consists only of a label and the \"root\"\n" +"partition.\n" +"\n" +"For Linux, there are a few possible options:\n" +"\n" +" * Label: this is the name you will have to type at the yaboot prompt to\n" +"select this boot option.\n" +"\n" +" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n" +"variation of vmlinux with an extension.\n" +"\n" +" * Root: the \"root\" device or ``/'' for your Linux installation.\n" +"\n" +" * Append: on Apple hardware, the kernel append option is often used to\n" +"assist in initializing video hardware, or to enable keyboard mouse button\n" +"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n" +"The following are some examples:\n" +"\n" +" video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" +"hda=autotune\n" +"\n" +" video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" +"\n" +" * Initrd: this option can be used either to load initial modules before\n" +"the boot device is available, or to load a ramdisk image for an emergency\n" +"boot situation.\n" +"\n" +" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n" +"need to allocate a large ramdisk, this option can be used to specify a\n" +"ramdisk larger than the default.\n" +"\n" +" * Read-write: normally the \"root\" partition is initially mounted as\n" +"read-only, to allow a file system check before the system becomes ``live''.\n" +"You can override the default with this option.\n" +"\n" +" * NoVideo: should the Apple video hardware prove to be exceptionally\n" +"problematic, you can select this option to boot in ``novideo'' mode, with\n" +"native frame buffer support.\n" +"\n" +" * Default: selects this entry as being the default Linux selection,\n" +"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n" +"highlighted with a ``*'' if you press [Tab] to see the boot selections." +msgstr "" +"dalam dan\n" +" Label\n" +" Imej\n" +"\n" +" Tambah on dalam dan on\n" +"\n" +"\n" +"\n" +" default default\n" +" terpasang fail default\n" +" dalam\n" +" Default default Tab." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP." +msgstr "Pejabat." + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "No floppy drive available!" +msgstr "Tidak!" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To know about the options available for the current printer read either the " +"list shown below or click on the \"Print option list\" button.%s%s%s\n" +"\n" +msgstr "Kepada on" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Saudi Arabia" +msgstr "Arab Saudi" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Continue anyway?" +msgstr "Teruskan?" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"If your printer is not listed, choose a compatible (see printer manual) or a " +"similar one." +msgstr "" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Internet" +msgstr "Internet" + +#: ../../standalone/service_harddrake:1 +#, c-format +msgid "Some devices were added:\n" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Geometry: %s cylinders, %s heads, %s sectors\n" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printing on the printer \"%s\"" +msgstr "Cetakan on" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed" +msgstr "hos dan hos" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore From Tape" +msgstr "Daripada" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "Choose the profile to configure" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Password minimum length and number of digits and upcase letters" +msgstr "Katalaluan dan dan" + +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"\n" +"Enter a Zeroconf host name without any dot if you don't\n" +"want to use the default host name." +msgstr "default." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Backup Now from configuration file" +msgstr "" + +#: ../../fsedit.pm:1 +#, c-format +msgid "Mount points should contain only alphanumerical characters" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Restarting printing system..." +msgstr "" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "See hardware info" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Day" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "First sector of boot partition" +msgstr "Sektor pertama bagi partisyen but" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer manufacturer, model" +msgstr "" + +#: ../../printer/data.pm:1 +#, c-format +msgid "PDQ - Print, Don't Queue" +msgstr "" + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "" +"[OPTIONS]...\n" +"Mandrake Terminal Server Configurator\n" +"--enable : enable MTS\n" +"--disable : disable MTS\n" +"--start : start MTS\n" +"--stop : stop MTS\n" +"--adduser : add an existing system user to MTS (requires username)\n" +"--deluser : delete an existing system user from MTS (requires " +"username)\n" +"--addclient : add a client machine to MTS (requires MAC address, IP, " +"nbi image name)\n" +"--delclient : delete a client machine from MTS (requires MAC address, " +"IP, nbi image name)" +msgstr "Pelayan mula mula pengguna pengguna IP IP" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Subnet Mask:" +msgstr "Topengan:" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Set password expiration and account inactivation delays" +msgstr "dan" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "" +"_: load here is a noun, the load of the system\n" +"Load" +msgstr "" + +#: ../../Xconfig/monitor.pm:1 +#, fuzzy, c-format +msgid "" +"The two critical parameters are the vertical refresh rate, which is the " +"rate\n" +"at which the whole screen is refreshed, and most importantly the horizontal\n" +"sync rate, which is the rate at which scanlines are displayed.\n" +"\n" +"It is VERY IMPORTANT that you do not specify a monitor type with a sync " +"range\n" +"that is beyond the capabilities of your monitor: you may damage your " +"monitor.\n" +" If in doubt, choose a conservative setting." +msgstr "" +"menegak dan mengufuk\n" +" dalam." + +#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 +#, c-format +msgid "Modify" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"The \"%s\" and \"%s\" commands also allow to modify the option settings for " +"a particular printing job. Simply add the desired settings to the command " +"line, e. g. \"%s <file>\".\n" +msgstr "dan<file>" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Need hostname, username and password!" +msgstr "dan!" + +#: ../../network/adsl.pm:1 +#, fuzzy, c-format +msgid "Insert floppy" +msgstr "dalam" + +#: ../../diskdrake/dav.pm:1 +#, fuzzy, c-format +msgid "" +"WebDAV is a protocol that allows you to mount a web server's directory\n" +"locally, and treat it like a local filesystem (provided the web server is\n" +"configured as a WebDAV server). If you would like to add WebDAV mount\n" +"points, select \"New\"." +msgstr "direktori dan lokal Baru." + +#: ../../standalone/drakbug:1 +#, c-format +msgid "HardDrake" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "new" +msgstr "" + +#: ../../security/help.pm:1 +#, c-format +msgid "Enable/Disable syslog reports to console 12" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Would you like to try again?" +msgstr "" + +#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Wizard" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Edit selected server" +msgstr "Edit" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Please choose where you want to backup" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "You need to reboot for the partition table modifications to take place" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Do not include the browser cache" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Failed to check filesystem %s. Do you want to repair the errors? (beware, " +"you can lose data)" +msgstr "Gagal" + +#: ../../standalone/keyboarddrake:1 +#, c-format +msgid "Please, choose your keyboard layout." +msgstr "" + +#: ../../mouse.pm:1 ../../security/level.pm:1 +#, c-format +msgid "Standard" +msgstr "" + +#: ../../standalone/mousedrake:1 +#, c-format +msgid "Please choose your mouse type." +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Connect..." +msgstr "Sambung." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Failed to configure printer \"%s\"!" +msgstr "Gagal!" + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "not configured" +msgstr "" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "ISA / PCMCIA" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "About" +msgstr "Perihal" + +#: ../../network/network.pm:1 +#, c-format +msgid "Proxies configuration" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "GlidePoint" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Start: sector %s\n" +msgstr "Mula" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "No Mask" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Network interface already configured" +msgstr "Rangkaian" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Couldn't access the floppy!" +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "connecting to Bugzilla wizard ..." +msgstr "" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Mail Server" +msgstr "Pelayan Mel" + +#: ../../diskdrake/hd_gtk.pm:1 +#, fuzzy, c-format +msgid "Please click on a partition" +msgstr "on" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Multi-function device on HP JetDirect" +msgstr "on" + +#: ../../any.pm:1 ../../standalone/drakbackup:1 +#, c-format +msgid "Linux" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "Have a nice day!" +msgstr "" + +#: ../../help.pm:1 +#, c-format +msgid "/dev/fd0" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Upgrade %s" +msgstr "Tingkatupaya" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Select Printer Connection" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "Scanning for TV channels in progress ..." +msgstr "dalam." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Error during sending file via FTP.\n" +" Please correct your FTP configuration." +msgstr "" +"Ralat fail FTP\n" +" FTP." + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "IP Range Start:" +msgstr "IP Mula:" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"The internet superserver daemon (commonly called inetd) starts a\n" +"variety of other internet services as needed. It is responsible for " +"starting\n" +"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd " +"disables\n" +"all of the services it is responsible for." +msgstr "dan." + +#: ../../standalone/draksplash:1 +#, c-format +msgid "the height of the progress bar" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +"- Save via %s on host: %s\n" +msgstr "Simpan on" + +#: ../../lang.pm:1 ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "Argentina" +msgstr "Argentina" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Domain Name Server" +msgstr "Domain Nama" + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "Security Level:" +msgstr "Tahap keselamatan:" + +#: ../../fsedit.pm:1 +#, c-format +msgid "Mount points must begin with a leading /" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Choose your CD/DVD device" +msgstr "" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Postfix Mail Server" +msgstr "Mel" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Quit without saving" +msgstr "Keluar tanpa menyimpan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Yemen" +msgstr "Yaman" + +#: ../../share/advertising/11-mnf.pl:1 +#, fuzzy, c-format +msgid "This product is available on the MandrakeStore Web site." +msgstr "on." + +#: ../../interactive/stdio.pm:1 +#, c-format +msgid "=> There are many things to choose from (%s).\n" +msgstr "" + +#: ../../steps.pm:1 +#, c-format +msgid "Hard drive detection" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "" +"You haven't selected any group of packages.\n" +"Please choose the minimal installation you want:" +msgstr "" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "" +"You need the Alcatel microcode.\n" +"You can provide it now via a floppy or your windows partition,\n" +"or skip and do it later." +msgstr "" + +#: ../../diskdrake/dav.pm:1 +#, c-format +msgid "Please enter the WebDAV server URL" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Tajikistan" +msgstr "Tajikistan" + +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Accept" +msgstr "Terima" + +#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Description" +msgstr "Huraian" + +#: ../../fsedit.pm:1 +#, fuzzy, c-format +msgid "Error opening %s for writing: %s" +msgstr "Ralat" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Mouse type: %s\n" +msgstr "Tetikus" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Your card can have 3D hardware acceleration support with XFree %s." +msgstr "" + +#: ../../Xconfig/monitor.pm:1 +#, c-format +msgid "Choose a monitor" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Empty label not allowed" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Maltese (UK)" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "I can't add any more partition" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Size in MB: " +msgstr "Saiz dalam " + +#: ../../printer/main.pm:1 +#, c-format +msgid "Remote printer" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Please choose a language to use." +msgstr "" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "" +"WARNING: this device has been previously configured to connect to the " +"Internet.\n" +"Simply accept to keep this device configured.\n" +"Modifying the fields below will override this configuration." +msgstr "AMARAN Internet terima." + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "I can set up your computer to automatically log on one user." +msgstr "on pengguna." + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Floppy format" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Generic Printers" +msgstr "Generik" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Please choose the printer to which the print jobs should go or enter a " +"device name/file name in the input line" +msgstr "fail dalam" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "The scanners on this machine are available to other computers" +msgstr "on" + +#: ../../any.pm:1 +#, c-format +msgid "First sector of the root partition" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Alternative drivers" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"Please check all options that you need.\n" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Initrd" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Cape Verde" +msgstr "Cape Verde" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "whether this cpu has the Cyrix 6x86 Coma bug" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "Loading printer configuration... Please wait" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "early pentiums were buggy and freezed when decoding the F00F bytecode" +msgstr "dan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Guam" +msgstr "Guam" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Please choose the port that your printer is connected to or enter a device " +"name/file name in the input line" +msgstr "fail dalam" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "/Options/Test" +msgstr "Pilihan" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "" +"This level is to be used with care. It makes your system more easy to use,\n" +"but very sensitive. It must not be used for a machine connected to others\n" +"or to the Internet. There is no password access." +msgstr "Internet tidak." + +#: ../../fs.pm:1 +#, c-format +msgid "Mounting partition %s" +msgstr "" + +#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "User name" +msgstr "Nama pengguna" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Userdrake" +msgstr "Userdrake" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Which partition do you want to use for Linux4Win?" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Test pages" +msgstr "Ujian" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Logical volume name " +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"List of data to restore:\n" +"\n" +msgstr "" + +#: ../../fs.pm:1 +#, c-format +msgid "Checking %s" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "TCP/Socket Printer Options" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Card mem (DMA)" +msgstr "DMA" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Disconnecting from Internet " +msgstr "" + +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "France" +msgstr "Perancis" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "browse" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Checking installed software..." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Remote printer name missing!" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Do you want to enable printing on printers in the local network?\n" +msgstr "on dalam lokal" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Turkey" +msgstr "Turki" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "Alcatel speedtouch usb" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Number of buttons" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Vietnamese \"numeric row\" QWERTY" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Module" +msgstr "Modul" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"In addition, queues not created with this program or \"foomatic-configure\" " +"cannot be transferred." +msgstr "Masuk." + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Hardware" +msgstr "Perkakasan" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Ctrl and Alt keys simultaneously" +msgstr "Ctrl dan Alt" + +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "United States" +msgstr "Amerika Syarikat" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "User umask" +msgstr "Pengguna" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Default OS?" +msgstr "Default?" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Swiss (German layout)" +msgstr "Jerman" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Configure all heads independently" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Please choose the printer you want to set up. The configuration of the " +"printer will work fully automatically. If your printer was not correctly " +"detected or if you prefer a customized printer configuration, turn on " +"\"Manual configuration\"." +msgstr "on." + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "NTP Server" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Sulogin(8) in single user level" +msgstr "dalam tunggal pengguna" + +#: ../../install_steps_gtk.pm:1 +#, fuzzy, c-format +msgid "Load/Save on floppy" +msgstr "Simpan on" + +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "This theme does not yet have a bootsplash in %s !" +msgstr "dalam!" + +#: ../../pkgs.pm:1 +#, c-format +msgid "nice" +msgstr "" + +#: ../../Xconfig/test.pm:1 +#, fuzzy, c-format +msgid "Leaving in %d seconds" +msgstr "dalam" + +#: ../../network/modem.pm:1 +#, fuzzy, c-format +msgid "Please choose which serial port your modem is connected to." +msgstr "bersiri." + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Property" +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Ghostscript" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "LAN Configuration" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Ghana" +msgstr "Ghana" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Path or Module required" +msgstr "Modul" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Advanced Options" +msgstr "Lanjutan" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "View Configuration" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Coma bug" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"At this point, you need to choose which partition(s) will be used for the\n" +"installation of your Mandrake Linux system. If partitions have already been\n" +"defined, either from a previous installation of GNU/Linux or by another\n" +"partitioning tool, you can use existing partitions. Otherwise, hard drive\n" +"partitions must be defined.\n" +"\n" +"To create partitions, you must first select a hard drive. You can select\n" +"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" +"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" +"\n" +"To partition the selected hard drive, you can use these options:\n" +"\n" +" * \"%s\": this option deletes all partitions on the selected hard drive\n" +"\n" +" * \"%s\": this option enables you to automatically create ext3 and swap\n" +"partitions in the free space of your hard drive\n" +"\n" +"\"%s\": gives access to additional features:\n" +"\n" +" * \"%s\": saves the partition table to a floppy. Useful for later\n" +"partition-table recovery if necessary. It is strongly recommended that you\n" +"perform this step.\n" +"\n" +" * \"%s\": allows you to restore a previously saved partition table from a\n" +"floppy disk.\n" +"\n" +" * \"%s\": if your partition table is damaged, you can try to recover it\n" +"using this option. Please be careful and remember that it doesn't always\n" +"work.\n" +"\n" +" * \"%s\": discards all changes and reloads the partition table that was\n" +"originally on the hard drive.\n" +"\n" +" * \"%s\": unchecking this option will force users to manually mount and\n" +"unmount removable media such as floppies and CD-ROMs.\n" +"\n" +" * \"%s\": use this option if you wish to use a wizard to partition your\n" +"hard drive. This is recommended if you do not have a good understanding of\n" +"partitioning.\n" +"\n" +" * \"%s\": use this option to cancel your changes.\n" +"\n" +" * \"%s\": allows additional actions on partitions (type, options, format)\n" +"and gives more information about the hard drive.\n" +"\n" +" * \"%s\": when you are finished partitioning your hard drive, this will\n" +"save your changes back to disk.\n" +"\n" +"When defining the size of a partition, you can finely set the partition\n" +"size by using the Arrow keys of your keyboard.\n" +"\n" +"Note: you can reach any option using the keyboard. Navigate through the\n" +"partitions using [Tab] and the [Up/Down] arrows.\n" +"\n" +"When a partition is selected, you can use:\n" +"\n" +" * Ctrl-c to create a new partition (when an empty partition is selected)\n" +"\n" +" * Ctrl-d to delete a partition\n" +"\n" +" * Ctrl-m to set the mount point\n" +"\n" +"To get information about the different file system types available, please\n" +"read the ext2FS chapter from the ``Reference Manual''.\n" +"\n" +"If you are installing on a PPC machine, you will want to create a small HFS\n" +"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n" +"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" +"may find it a useful place to store a spare kernel and ramdisk images for\n" +"emergency boot situations." +msgstr "" +"on dan on\n" +" on\n" +" dan dalam\n" +"\n" +"\n" +" dan\n" +" dan on\n" +" secara manual dan dan\n" +"\n" +"\n" +" on\n" +" Tab dan Naik Turun\n" +" Ctrl kosong\n" +" Ctrl\n" +" Ctrl fail on dan." + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If it is not the case, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs." +msgstr "" +"\n" +" dan on\n" +" Masuk." + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "There was an error installing packages:" +msgstr "ralat:" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Lexmark inkjet configuration" +msgstr "" + +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Undo" +msgstr "" + +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Save partition table" +msgstr "Simpan" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Finnish" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Macedonia" +msgstr "Macedonia" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"The per-user sharing uses the group \"fileshare\". \n" +"You can use userdrake to add a user to this group." +msgstr "pengguna pengguna." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Slovenian" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"Authorize:\n" +"\n" +"- all services controlled by tcp_wrappers (see hosts.deny(5) man page) if " +"set to \"ALL\",\n" +"\n" +"- only local ones if set to \"LOCAL\"\n" +"\n" +"- none if set to \"NONE\".\n" +"\n" +"To authorize the services you need, use /etc/hosts.allow (see hosts.allow" +"(5))." +msgstr "hos lokal tiada hos hos." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Libya" +msgstr "Libya" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Configuring scripts, installing software, starting servers..." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer on parallel port #%s" +msgstr "on" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"- Burn to CD" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Table" +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "I don't know how to format %s in type %s" +msgstr "dalam" + +#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Model" +msgstr "Model" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "USB printer #%s" +msgstr "USB" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Stop Server" +msgstr "Henti" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "" +"\n" +"Select the theme for\n" +"lilo and bootsplash,\n" +"you can choose\n" +"them separately" +msgstr "dan" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Modem" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Tuvalu" +msgstr "Tuvalu" + +#: ../../help.pm:1 ../../network/netconnect.pm:1 +#, c-format +msgid "Use auto detection" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"GPM adds mouse support to text-based Linux applications such the\n" +"Midnight Commander. It also allows mouse-based console cut-and-paste " +"operations,\n" +"and includes support for pop-up menus on the console." +msgstr "dan on." + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Started on boot" +msgstr "on" + +#: ../../share/advertising/12-mdkexpert.pl:1 +#, fuzzy, c-format +msgid "" +"Join the MandrakeSoft support teams and the Linux Community online to share " +"your knowledge and help others by becoming a recognized Expert on the online " +"technical support website:" +msgstr "dan dan on:" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "No password aging for" +msgstr "Tidak" + +#: ../../standalone/draksec:1 +#, c-format +msgid "" +"The following options can be set to customize your\n" +"system security. If you need an explanation, look at the help tooltip.\n" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Automatically find available printers on remote machines" +msgstr "on" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "East Timor" +msgstr "Timor Larose" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "On Tape Device" +msgstr "on" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +"- Save to Tape on device: %s" +msgstr "Simpan on" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Login name" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Report unowned files" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Del profile..." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Installing Foomatic..." +msgstr "" + +#: ../../standalone/XFdrake:1 +#, fuzzy, c-format +msgid "Please log out and then use Ctrl-Alt-BackSpace" +msgstr "keluar dan Ctrl Alt" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "detected" +msgstr "" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "The network needs to be restarted. Do you want to restart it ?" +msgstr "ulanghidup?" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Package: " +msgstr "Pakej " + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Can't write /etc/sysconfig/bootsplash." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "SECURITY WARNING!" +msgstr "AMARAN!" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "StarOffice" +msgstr "" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "No, I don't want autologin" +msgstr "Tidak" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Windows Migration tool" +msgstr "Tetingkap" + +#: ../../any.pm:1 ../../help.pm:1 +#, fuzzy, c-format +msgid "All languages" +msgstr "Semua" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Removing %s" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "%s not found...\n" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Testing your connection..." +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Cache size" +msgstr "" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "" +"Passwords are now enabled, but use as a networked computer is still not " +"recommended." +msgstr "Katalaluan dihidupkan." + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Start sector: " +msgstr "Mula " + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Congo (Brazzaville)" +msgstr "Kongo" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Read" +msgstr "" + +#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 +#, c-format +msgid "The package %s needs to be installed. Do you want to install it?" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Seychelles" +msgstr "Seychelles" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Printerdrake has compared the model name resulting from the printer auto-" +"detection with the models listed in its printer database to find the best " +"match. This choice can be wrong, especially when your printer is not listed " +"at all in the database. So check whether the choice is correct and click " +"\"The model is correct\" if so and if not, click \"Select model manually\" " +"so that you can choose your printer model manually on the next screen.\n" +"\n" +"For your printer Printerdrake has found:\n" +"\n" +"%s" +msgstr "dalam dalam dan dan secara manual secara manual on" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Bad password on %s" +msgstr "on" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"There is one unknown printer directly connected to your system" +msgstr "tidak diketahui" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Right Control key" +msgstr "Kanan" + +#: ../../network/adsl.pm:1 +#, fuzzy, c-format +msgid "" +"Insert a FAT formatted floppy in drive %s with %s in root directory and " +"press %s" +msgstr "dalam" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Zambia" +msgstr "Zambia" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "Security Administrator (login or email)" +msgstr "Keselamatan" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Sorry, we support only 2.4 kernels." +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Romanian (qwerty)" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Under Devel ... please wait." +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Egypt" +msgstr "Mesir" + +#: ../../crypto.pm:1 ../../lang.pm:1 +#, fuzzy, c-format +msgid "Czech Republic" +msgstr "Republik Czech" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Sound card" +msgstr "Bunyi" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Import Fonts" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, fuzzy, c-format +msgid "" +"You have one big MicroSoft Windows partition.\n" +"I suggest you first resize that partition\n" +"(click on it, then click on \"Resize\")" +msgstr "Tetingkap on on" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Suppress Temporary Files" +msgstr "" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "" +"Congratulations, the network and Internet configuration is finished.\n" +"\n" +msgstr "Tahniah dan Internet" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Change partition type" +msgstr "Ubah" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"hardware. Choose the one that best suits your needs (you will be able to\n" +"change that after installation though). A sample of the chosen\n" +"configuration is shown in the monitor." +msgstr "" +"Resolusi\n" +" dan A dalam." + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "Network Options" +msgstr "Rangkaian" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Enable msec hourly security check" +msgstr "" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "" +"Display theme\n" +"under console" +msgstr "Paparan" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Statistics" +msgstr "" + +#: ../../printer/cups.pm:1 +#, fuzzy, c-format +msgid "(on %s)" +msgstr "on" + +#: ../../mouse.pm:1 +#, c-format +msgid "MM Series" +msgstr "" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "" +"A library which defends against buffer overflow and format string attacks." +msgstr "A dan." + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "average" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "New printer name" +msgstr "Baru" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "" +"Allow an ordinary user to mount the file system. The\n" +"name of the mounting user is written to mtab so that he can unmount the " +"file\n" +"system again. This option implies the options noexec, nosuid, and nodev\n" +"(unless overridden by subsequent options, as in the option line\n" +"user,exec,dev,suid )." +msgstr "pengguna fail pengguna fail dan dalam." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Equatorial Guinea" +msgstr "Equitorial Guinea" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Backup System" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Build Backup" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To print a file from the command line (terminal window) use the command \"%s " +"<file>\" or \"%s <file>\".\n" +msgstr "Kepada fail<file><file>" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Currently, no alternative possibility is available" +msgstr "tidak" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Romanian (qwertz)" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Write Config" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"The routed daemon allows for automatic IP router table updated via\n" +"the RIP protocol. While RIP is widely used on small networks, more complex\n" +"routing protocols are needed for complex networks." +msgstr "IP on protokol." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Kiribati" +msgstr "Kiribati" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "Logitech Mouse (serial, old C7 type) with Wheel emulation" +msgstr "Logitech Mouse (bersiri, jenis C7 lama)" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Other (not drakbackup) keys in place already" +msgstr "Lain-lain dalam" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"X (for X Window System) is the heart of the GNU/Linux graphical interface\n" +"on which all the graphical environments (KDE, GNOME, AfterStep,\n" +"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n" +"\n" +"You will be presented with a list of different parameters to change to get\n" +"an optimal graphical display: Graphic Card\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"graphic card installed on your machine. If it is not the case, you can\n" +"choose from this list the card you actually have installed.\n" +"\n" +" In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs.\n" +"\n" +"\n" +"\n" +"Monitor\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"monitor connected to your machine. If it is incorrect, you can choose from\n" +"this list the monitor you actually have connected to your computer.\n" +"\n" +"\n" +"\n" +"Resolution\n" +"\n" +" Here you can choose the resolutions and color depths available for your\n" +"hardware. Choose the one that best suits your needs (you will be able to\n" +"change that after installation though). A sample of the chosen\n" +"configuration is shown in the monitor.\n" +"\n" +"\n" +"\n" +"Test\n" +"\n" +" the system will try to open a graphical screen at the desired\n" +"resolution. If you can see the message during the test and answer \"%s\",\n" +"then DrakX will proceed to the next step. If you cannot see the message, it\n" +"means that some part of the autodetected configuration was incorrect and\n" +"the test will automatically end after 12 seconds, bringing you back to the\n" +"menu. Change settings until you get a correct graphical display.\n" +"\n" +"\n" +"\n" +"Options\n" +"\n" +" Here you can choose whether you want to have your machine automatically\n" +"switch to a graphical interface at boot. Obviously, you want to check\n" +"\"%s\" if your machine is to act as a server, or if you were not successful\n" +"in getting the display configured." +msgstr "" +"Sistem KDE GNOME AfterStep\n" +" dan on\n" +" Masuk\n" +" dan\n" +" dan A dalam\n" +" dan dan saat Ubah\n" +"." + +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Browse" +msgstr "Lungsur" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "CDROM" +msgstr "" + +#: ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "Do you want to try to connect to the Internet now?" +msgstr "Internet?" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Belgian" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Do you have an ISA sound card?" +msgstr "" + +#: ../../network/ethernet.pm:1 +#, fuzzy, c-format +msgid "" +"No ethernet network adapter has been detected on your system.\n" +"I cannot set up this connection type." +msgstr "Tidak on." + +#: ../../diskdrake/hd_gtk.pm:1 +#, fuzzy, c-format +msgid "Windows" +msgstr "Tetingkap" + +#: ../../common.pm:1 +#, c-format +msgid "Can't make screenshots before partitioning" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Host Name" +msgstr "Hos" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "/File/Save _As" +msgstr "Fail Simpan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To get access to printers on remote CUPS servers in your local network you " +"only need to turn on the \"Automatically find available printers on remote " +"machines\" option; the CUPS servers inform your machine automatically about " +"their printers. All printers currently known to your machine are listed in " +"the \"Remote printers\" section in the main window of Printerdrake. If your " +"CUPS server(s) is/are not in your local network, you have to enter the IP " +"address(es) and optionally the port number(s) here to get the printer " +"information from the server(s)." +msgstr "" +"Kepada on dalam lokal on on Semua dalam dalam utama dalam lokal IP dan." + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "%s is not in the scanner database, configure it manually?" +msgstr "dalam secara manual?" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Delay before booting default image" +msgstr "default" + +#: ../../any.pm:1 +#, c-format +msgid "Restrict command line options" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "East Europe" +msgstr "Timur" + +#: ../../help.pm:1 ../../install_interactive.pm:1 +#, c-format +msgid "Use free space" +msgstr "" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "use dhcp" +msgstr "" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Mail alert" +msgstr "Mel" + +#: ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "Internet configuration" +msgstr "Internet" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Uzbekistan" +msgstr "Uzbekistan" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Detected %s" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "/Autodetect _printers" +msgstr "" + +#: ../../interactive.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 +#, fuzzy, c-format +msgid "Finish" +msgstr "Tamat" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Show automatically selected packages" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Togo" +msgstr "Togo" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "CPU flags reported by the kernel" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Something went wrong! - Is mkisofs installed?" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "16 MB" +msgstr "" + +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Please try again" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "The model is correct" +msgstr "" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "FAT resizing failed: %s" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Individual package selection" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "This partition is not resizeable" +msgstr "" + +#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Location" +msgstr "Lokasi" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "USA (cable-hrc)" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Guatemala" +msgstr "Guatemala" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Journalised FS" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Ethernet cards promiscuity check" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "This machine" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "DOS drive letter: %s (just a guess)\n" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bahrain" +msgstr "Bahrain" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Select the files or directories and click on 'OK'" +msgstr "fail dan on OK" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "omit scsi modules" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "family of the cpu (eg: 6 for i686 class)" +msgstr "" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "" +"Because you are doing a network installation, your network is already " +"configured.\n" +"Click on Ok to keep your configuration, or cancel to reconfigure your " +"Internet & Network connection.\n" +msgstr "on Ok Internet Rangkaian" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Run the daily security checks" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Keyboard layout: %s\n" +msgstr "Papan Kekunci" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Here you can choose whether the printers connected to this machine should be " +"accessable by remote machines and by which remote machines." +msgstr "dan." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Maltese (US)" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "The creation of the boot floppy has been successfully completed \n" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Mounts and unmounts all Network File System (NFS), SMB (Lan\n" +"Manager/Windows), and NCP (NetWare) mount points." +msgstr "dan Rangkaian Fail Sistem SMB Tetingkap dan." + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Launch the wizard" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Tvcard" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Toggle between normal/expert mode" +msgstr "normal" + +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "Size" +msgstr "Saiz" + +#: ../../help.pm:1 +#, c-format +msgid "GRUB" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Greenland" +msgstr "Greenland" + +#: ../../mouse.pm:1 +#, c-format +msgid "Logitech MouseMan+/FirstMouse+" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Thursday" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Not the correct tape label. Tape is labelled %s." +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"The setup of Internet Connection Sharing has already been done.\n" +"It's currently enabled.\n" +"\n" +"What would you like to do?" +msgstr "Internet siap dihidupkan?" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Delete All NBIs" +msgstr "Padam Semua" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"This dialog allows you to fine tune your bootloader:\n" +"\n" +" * \"%s\": there are three choices for your bootloader:\n" +"\n" +" * \"%s\": if you prefer grub (text menu).\n" +"\n" +" * \"%s\": if you prefer LILO with its text menu interface.\n" +"\n" +" * \"%s\": if you prefer LILO with its graphical interface.\n" +"\n" +" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n" +"you prefer, the bootloader can be installed on the second hard drive\n" +"(\"%s\"), or even on a floppy disk (\"%s\");\n" +"\n" +" * \"%s\": after a boot or a reboot of the computer, this is the delay\n" +"given to the user at the console to select a boot entry other than the\n" +"default.\n" +"\n" +"!! Beware that if you choose not to install a bootloader (by selecting\n" +"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n" +"system! Be sure you know what you are doing before changing any of the\n" +"options. !!\n" +"\n" +"Clicking the \"%s\" button in this dialog will offer advanced options which\n" +"are normally reserved for the expert user." +msgstr "" +"\n" +"\n" +"\n" +"\n" +"\n" +" dalam default on on\n" +" pengguna dalam pengguna." + +#: ../../security/help.pm:1 +#, c-format +msgid "" +"if set, send the mail report to this email address else send it to root." +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Which configuration of XFree do you want to have?" +msgstr "" + +#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "More" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"This uses the same syntax as the command line program 'cdrecord'. 'cdrecord -" +"scanbus' would also show you the device number." +msgstr "" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "" +"With this security level, the use of this system as a server becomes " +"possible.\n" +"The security is now high enough to use the system as a server which can " +"accept\n" +"connections from many clients. Note: if your machine is only a client on the " +"Internet, you should choose a lower level." +msgstr "terima on Internet." + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Server Name" +msgstr "Pelayan Nama:" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Account Password" +msgstr "" + +#: ../../standalone/drakhelp:1 +#, fuzzy, c-format +msgid "" +"%s cannot be displayed \n" +". No Help entry of this type\n" +msgstr "Tidak Bantuan" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"You decided to install the bootloader on a partition.\n" +"This implies you already have a bootloader on the hard drive you boot (eg: " +"System Commander).\n" +"\n" +"On which drive are you booting?" +msgstr "on on Sistem?" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"WARNING!\n" +"\n" +"DrakX will now resize your Windows partition. Be careful: this\n" +"operation is dangerous. If you have not already done so, you\n" +"first need to exit the installation, run \"chkdsk c:\" from a\n" +"Command Prompt under Windows (beware, running graphical program\n" +"\"scandisk\" is not enough, be sure to use \"chkdsk\" in a\n" +"Command Prompt!), optionally run defrag, then restart the\n" +"installation. You should also backup your data.\n" +"When sure, press Ok." +msgstr "AMARAN Tetingkap siap Tetingkap dan ulanghidup Ok." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Tajik keyboard" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"You can copy the printer configuration which you have done for the spooler %" +"s to %s, your current spooler. All the configuration data (printer name, " +"description, location, connection type, and default option settings) is " +"overtaken, but jobs will not be transferred.\n" +"Not all queues can be transferred due to the following reasons:\n" +msgstr "siap Semua dan default" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Font List" +msgstr "Font" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"You may need to change your Open Firmware boot-device to\n" +" enable the bootloader. If you don't see the bootloader prompt at\n" +" reboot, hold down Command-Option-O-F at reboot and enter:\n" +" setenv boot-device %s,\\\\:tbxi\n" +" Then type: shut-down\n" +"At your next boot you should see the bootloader prompt." +msgstr "" +"Buka\n" +"\n" +" Arahan dan\n" +"\n" +"." + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"You appear to have an OldWorld or Unknown\n" +" machine, the yaboot bootloader will not work for you.\n" +"The install will continue, but you'll\n" +" need to use BootX or some other means to boot your machine" +msgstr "" +"Entah\n" +"\n" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Select file" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Choose the network or host on which the local printers should be made " +"available:" +msgstr "on lokal:" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"These commands you can also use in the \"Printing command\" field of the " +"printing dialogs of many applications, but here do not supply the file name " +"because the file to print is provided by the application.\n" +msgstr "dalam Cetakan fail fail" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Japan" +msgstr "Jepun" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Print option list" +msgstr "" + +#: ../../standalone/localedrake:1 +#, fuzzy, c-format +msgid "The change is done, but to be effective you must logout" +msgstr "siap" + +#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Country / Region" +msgstr "" + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Search servers" +msgstr "Cari" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "NCP queue name missing!" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "" +"Warning, another internet connection has been detected, maybe using your " +"network" +msgstr "Amaran" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Cd-Rom labeled \"%s\"" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "CDRW media" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Saves and restores system entropy pool for higher quality random\n" +"number generation." +msgstr "dan." + +#: ../../share/advertising/07-server.pl:1 +#, c-format +msgid "Turn your computer into a reliable server" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Check empty password in /etc/shadow" +msgstr "kosong dalam" + +#: ../../network/network.pm:1 +#, c-format +msgid " (driver %s)" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Loopback file(s):\n" +" %s\n" +msgstr "fail\n" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "I don't know" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Start when requested" +msgstr "Mula" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid ", TCP/IP host \"%s\", port %s" +msgstr "IP" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "" +"You are about to configure an Auto Install floppy. This feature is somewhat " +"dangerous and must be used circumspectly.\n" +"\n" +"With that feature, you will be able to replay the installation you've " +"performed on this computer, being interactively prompted for some steps, in " +"order to change their values.\n" +"\n" +"For maximum safety, the partitioning and formatting will never be performed " +"automatically, whatever you chose during the install of this computer.\n" +"\n" +"Do you want to continue?" +msgstr "Install dan on dalam dan?" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Telugu" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"\n" +"Your card currently use the %s\"%s\" driver (default driver for your card is " +"\"%s\")" +msgstr "default" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Post Uninstall" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Connecting to Internet " +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid " (" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Cpuid level" +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Novell server \"%s\", printer \"%s\"" +msgstr "on" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Mongolian (cyrillic)" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "Add a module" +msgstr "Tambah" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Profile to delete:" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Local measure" +msgstr "" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Warning : IP address %s is usually reserved !" +msgstr "Amaran IP!" + +#: ../../mouse.pm:1 +#, c-format +msgid "busmouse" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Account Login (user name)" +msgstr "pengguna" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Fdiv bug" +msgstr "" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "" +"drakfirewall configurator\n" +"\n" +"Make sure you have configured your Network/Internet access with\n" +"drakconnect before going any further." +msgstr "Rangkaian Internet." + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Accept broadcasted icmp echo" +msgstr "Terima" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Uruguay" +msgstr "Uruguay" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Benin" +msgstr "Benin" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "SMB/Windows server \"%s\", share \"%s\"" +msgstr "on SMB Tetingkap" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Path selection" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Name/IP address of host:" +msgstr "Nama IP:" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Monitor: %s\n" +msgstr "Monitor" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Custom & system settings" +msgstr "Tersendiri" + +#: ../../partition_table/raw.pm:1 +#, fuzzy, c-format +msgid "" +"Something bad is happening on your drive. \n" +"A test to check the integrity of data has failed. \n" +"It means writing anything on the disk will end up with random, corrupted " +"data." +msgstr "on on." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer host name or IP missing!" +msgstr "IP!" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please check all users that you want to include in your backup." +msgstr "dalam." + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "" +"The %s must be configured by printerdrake.\n" +"You can launch printerdrake from the Mandrake Control Center in Hardware " +"section." +msgstr "dalam Perkakasan." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bangladesh" +msgstr "Bangladesh" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "Japan (cable)" +msgstr "Jepun" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Initial tests" +msgstr "" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "Continue" +msgstr "Teruskan" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Custom Restore" +msgstr "Tersendiri" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Saturday" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"\"%s\": if a sound card is detected on your system, it is displayed here.\n" +"If you notice the sound card displayed is not the one that is actually\n" +"present on your system, you can click on the button and choose another\n" +"driver." +msgstr "on on on dan." + +#: ../../security/help.pm:1 +#, c-format +msgid "Set the root umask." +msgstr "" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Script-based" +msgstr "" + +#: ../../install_any.pm:1 ../../partition_table.pm:1 +#, fuzzy, c-format +msgid "Error reading file %s" +msgstr "Ralat fail" + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "PLL setting:" +msgstr "" + +#: ../../install_interactive.pm:1 ../../install_steps.pm:1 +#, fuzzy, c-format +msgid "You must have a FAT partition mounted in /boot/efi" +msgstr "terpasang dalam" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid " on " +msgstr "" + +#: ../../diskdrake/dav.pm:1 +#, fuzzy, c-format +msgid "The URL must begin with http:// or https://" +msgstr "URL" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"You can specify directly the URI to access the printer. The URI must fulfill " +"either the CUPS or the Foomatic specifications. Note that not all URI types " +"are supported by all the spoolers." +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Other OS (SunOS...)" +msgstr "Lain-lain" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Install/Upgrade" +msgstr "Install" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "%d packages" +msgstr "" + +#: ../../crypto.pm:1 ../../lang.pm:1 +#, fuzzy, c-format +msgid "Costa Rica" +msgstr "Costa Rica" + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "" +"[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n" +"Backup and Restore application\n" +"\n" +"--default : save default directories.\n" +"--debug : show all debug messages.\n" +"--show-conf : list of files or directories to backup.\n" +"--config-info : explain configuration file options (for non-X " +"users).\n" +"--daemon : use daemon configuration. \n" +"--help : show this message.\n" +"--version : show version number.\n" +msgstr "default dan default default fail fail" + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Domain Authentication Required" +msgstr "Domain Pengesahan" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +"\n" +"\n" +" Thanks:\n" +"\t- LTSP Project http://www.ltsp.org\n" +"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n" +"\n" +msgstr "" + +#: ../../security/level.pm:1 +#, c-format +msgid "Use libsafe for servers" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Icelandic" +msgstr "Icelandic" + +#: ../../standalone.pm:1 +#, c-format +msgid "" +"\n" +"Usage: %s [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--" +"testing] [-v|--version] " +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"Maximum size\n" +" allowed for Drakbackup (MB)" +msgstr "" + +#: ../../loopback.pm:1 +#, c-format +msgid "Circular mounts %s\n" +msgstr "" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Lilo/grub mode" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Martinique" +msgstr "Martinique" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "HardDrive / NFS" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Old user list:\n" +msgstr "pengguna" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Search Backups" +msgstr "Cari" + +#: ../../modules/parameters.pm:1 +#, c-format +msgid "a number" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Swedish" +msgstr "Swedish" + +#. -PO: the %s is the driver type (scsi, network, sound,...) +#: ../../modules/interactive.pm:1 +#, c-format +msgid "Which %s driver should I try?" +msgstr "" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "" +"You will receive an alert if one of the selected services is no longer " +"running" +msgstr "tidak" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Weekday" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Filesystem types:" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Northern Mariana Islands" +msgstr "Kepulauan Mariana Utara" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid ", multi-function device on HP JetDirect" +msgstr "on" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "none" +msgstr "tiada" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "" +"Name of the profile to create (the new profile is created as a copy of the " +"current one) :" +msgstr "Nama:" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Floppy" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain /etc/exports:\n" +" \t\tClusternfs allows export of the root filesystem to diskless " +"clients. drakTermServ\n" +" \t\tsets up the correct entry to allow anonymous access to the root " +"filesystem from\n" +" \t\tdiskless clients.\n" +"\n" +" \t\tA typical exports entry for clusternfs is:\n" +" \t\t\n" +" \t\t/ (ro,all_squash)\n" +" \t\t/home SUBNET/MASK(rw,root_squash)\n" +"\t\t\t\n" +"\t\t\tWith SUBNET/MASK being defined for your network." +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Ghostscript referencing" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Bootloader" +msgstr "PemuatBoot" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Authorize all services controlled by tcp_wrappers" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Move" +msgstr "" + +#: ../../any.pm:1 ../../help.pm:1 +#, fuzzy, c-format +msgid "Bootloader to use" +msgstr "PemuatBoot" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "SMB server host" +msgstr "SMB" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Name Servers:" +msgstr "Nama Pelayan:" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Minute" +msgstr "" + +#: ../../install_messages.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Warning\n" +"\n" +"Please read carefully the terms below. If you disagree with any\n" +"portion, you are not allowed to install the next CD media. Press 'Refuse' \n" +"to continue the installation without using these media.\n" +"\n" +"\n" +"Some components contained in the next CD media are not governed\n" +"by the GPL License or similar agreements. Each such component is then\n" +"governed by the terms and conditions of its own specific license. \n" +"Please read carefully and comply with such specific licenses before \n" +"you use or redistribute the said components. \n" +"Such licenses will in general prevent the transfer, duplication \n" +"(except for backup purposes), redistribution, reverse engineering, \n" +"de-assembly, de-compilation or modification of the component. \n" +"Any breach of agreement will immediately terminate your rights under \n" +"the specific license. Unless the specific license terms grant you such\n" +"rights, you usually cannot install the programs on more than one\n" +"system, or adapt it to be used on a network. In doubt, please contact \n" +"directly the distributor or editor of the component. \n" +"Transfer to third parties or copying of such components including the \n" +"documentation is usually forbidden.\n" +"\n" +"\n" +"All rights to the components of the next CD media belong to their \n" +"respective authors and are protected by intellectual property and \n" +"copyright laws applicable to software programs.\n" +msgstr "dalam dan dan dalam on on Masuk dan dan" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "/_Expert mode" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Remove this printer from Star Office/OpenOffice.org/GIMP" +msgstr "Buang Pejabat" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Linux Virtual Server, used to build a high-performance and highly\n" +"available server." +msgstr "Pelayan dan." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Micronesia" +msgstr "Micronesia" + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "4 billion colors (32 bits)" +msgstr "" + +#: ../../steps.pm:1 +#, c-format +msgid "License" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "This may take a moment to generate the keys." +msgstr "" + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "" +"Here, you can setup the security level and administrator of your machine.\n" +"\n" +"\n" +"The Security Administrator is the one who will receive security alerts if " +"the\n" +"'Security Alerts' option is set. It can be a username or an email.\n" +"\n" +"\n" +"The Security Level menu allows you to select one of the six preconfigured " +"security levels\n" +"provided with msec. These levels range from poor security and ease of use, " +"to\n" +"paranoid config, suitable for very sensitive server applications:\n" +"\n" +"\n" +"<span foreground=\"royalblue3\">Poor</span>: This is a totally unsafe but " +"very\n" +"easy to use security level. It should only be used for machines not " +"connected to\n" +"any network and that are not accessible to everybody.\n" +"\n" +"\n" +"<span foreground=\"royalblue3\">Standard</span>: This is the standard " +"security\n" +"recommended for a computer that will be used to connect to the Internet as " +"a\n" +"client.\n" +"\n" +"\n" +"<span foreground=\"royalblue3\">High</span>: There are already some\n" +"restrictions, and more automatic checks are run every night.\n" +"\n" +"\n" +"<span foreground=\"royalblue3\">Higher</span>: The security is now high " +"enough\n" +"to use the system as a server which can accept connections from many " +"clients. If\n" +"your machine is only a client on the Internet, you should choose a lower " +"level.\n" +"\n" +"\n" +"<span foreground=\"royalblue3\">Paranoid</span>: This is similar to the " +"previous\n" +"level, but the system is entirely closed and security features are at their\n" +"maximum" +msgstr "" +"dan Keselamatan Keselamatan Keselamatan dan\n" +"<span foreground=\"royalblue3\"></span> dan\n" +"<span foreground=\"royalblue3\"></span> Internet\n" +"<span foreground=\"royalblue3\"> Tinggi</span> dan\n" +"<span foreground=\"royalblue3\"></span> terima on Internet\n" +"<span foreground=\"royalblue3\"></span> dan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)" +msgstr "dan SMB" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "Sagem (using pppoa) usb" +msgstr "" + +#: ../../install_any.pm:1 +#, fuzzy, c-format +msgid "" +"An error occurred - no valid devices were found on which to create new " +"filesystems. Please check your hardware for the cause of this problem" +msgstr "ralat tidak on" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Starting the printing system at boot time" +msgstr "" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "Do you want to start the connection at boot?" +msgstr "mula?" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Processor ID" +msgstr "Pemproses" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "Sound trouble shooting" +msgstr "Bunyi" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Polish (qwerty layout)" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_Add Printer" +msgstr "Tambah user" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"Drakbackup activities via CD:\n" +"\n" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"You are about to install the printing system %s on a system running in the %" +"s security level.\n" +"\n" +"This printing system runs a daemon (background process) which waits for " +"print jobs and handles them. This daemon is also accessable by remote " +"machines through the network and so it is a possible point for attacks. " +"Therefore only a few selected daemons are started by default in this " +"security level.\n" +"\n" +"Do you really want to configure printing on this machine?" +msgstr "on dalam dan dan default dalam on?" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Host \"%s\", port %s" +msgstr "Hos" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "This partition can't be used for loopback" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "File already exists. Use it?" +msgstr "Fail?" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "received: " +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Right Alt key" +msgstr "Kanan Alt" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "the list of alternative drivers for this sound card" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Gateway" +msgstr "Gateway" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Tonga" +msgstr "Tonga" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Tunisia" +msgstr "Tunisia" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Scanner sharing" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Profile: " +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"Click on a device in the left tree in order to display its information here." +msgstr "on dalam dalam." + +#: ../../security/help.pm:1 +#, c-format +msgid "Allow/Forbid autologin." +msgstr "" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "XawTV isn't installed!" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Do not include critical files (passwd, group, fstab)" +msgstr "fail" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "old static device name used in dev package" +msgstr "dalam" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Enable the logging of IPv4 strange packets" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "This label is already used" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard will help you to install your printer(s) connected to this " +"computer or connected directly to the network.\n" +"\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected. Also " +"your network printer(s) must be connected and turned on.\n" +"\n" +"Note that auto-detecting printers on the network takes longer than the auto-" +"detection of only the printers connected to this machine. So turn off the " +"auto-detection of network printers when you don't need it.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " +"to set up your printer(s) now." +msgstr "" +"dalam on dan on dan on on off\n" +" on Berikutnya dan on Batal." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Greek (polytonic)" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "After formatting partition %s, all data on this partition will be lost" +msgstr "on" + +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Connection Time: " +msgstr "Masa " + +#: ../../standalone/livedrake:1 +#, fuzzy, c-format +msgid "" +"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n" +"If you don't have it, press Cancel to avoid live upgrade." +msgstr "dalam dan Ok siap Batal." + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Use group id for execution" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Choose the default user:" +msgstr "default pengguna:" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Gabon" +msgstr "Gabon" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Printers on remote CUPS servers do not need to be configured here; these " +"printers will be automatically detected." +msgstr "on." + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"Mandrake Linux can support multiple languages. Select\n" +"the languages you would like to install. They will be available\n" +"when your installation is complete and you restart your system." +msgstr "dan ulanghidup." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Directory (or module) to put the backup on this host." +msgstr "Direktori on." + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Domain" +msgstr "Domain" + +#: ../../any.pm:1 +#, c-format +msgid "Precise RAM size if needed (found %d MB)" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n" +"automated. DrakX will analyze the disk boot sector and act according to\n" +"what it finds there:\n" +"\n" +" * if a Windows boot sector is found, it will replace it with a grub/LILO\n" +"boot sector. This way you will be able to load either GNU/Linux or another\n" +"OS.\n" +"\n" +" * if a grub or LILO boot sector is found, it will replace it with a new\n" +"one.\n" +"\n" +"If it cannot make a determination, DrakX will ask you where to place the\n" +"bootloader." +msgstr "" +"dan dan\n" +" Tetingkap\n" +" tiada." + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Provider dns 2 (optional)" +msgstr "" + +#: ../../any.pm:1 ../../help.pm:1 +#, c-format +msgid "Boot device" +msgstr "" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Which partition do you want to resize?" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "United States Minor Outlying Islands" +msgstr "Amerika Syarikat, kepulauan Luar Minor" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Djibouti" +msgstr "Djibouti" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "A tool to monitor your logs" +msgstr "A" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "detected on port %s" +msgstr "on" + +#: ../../printer/data.pm:1 +#, c-format +msgid "LPD" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Graphics card: %s\n" +msgstr "Grafik" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/Set as _Default" +msgstr "Default" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Accept icmp echo" +msgstr "Terima" + +#: ../../bootloader.pm:1 +#, c-format +msgid "Yaboot" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "Logitech CC Series with Wheel emulation" +msgstr "" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Splash selection" +msgstr "" + +#: ../../partition_table.pm:1 +#, fuzzy, c-format +msgid "Extended partition not supported on this platform" +msgstr "on" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "ISDN Configuration" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "high" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Internet Connection Sharing" +msgstr "Internet" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Choose file" +msgstr "" + +#: ../../network/shorewall.pm:1 +#, fuzzy, c-format +msgid "" +"Warning! An existing firewalling configuration has been detected. You may " +"need some manual fixes after installation." +msgstr "Amaran." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printing/Photo Card Access on \"%s\"" +msgstr "Cetakan on" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Daily security check" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Do you want to enable printing on the printers mentioned above or on " +"printers in the local network?\n" +msgstr "on on dalam lokal" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer default settings" +msgstr "default" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"the WP flag in the CR0 register of the cpu enforce write proctection at the " +"memory page level, thus enabling the processor to prevent unchecked kernel " +"accesses to user memory (aka this is a bug guard)" +msgstr "dalam pengguna" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "Generic PS2 Wheel Mouse" +msgstr "Generik" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Removing old printer \"%s\"..." +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Select a device !" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Remove selected server" +msgstr "Buang" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "Sagem (using dhcp) usb" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "French Southern Territories" +msgstr "Perancis" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "the vendor name of the processor" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "All data on this partition should be backed-up" +msgstr "Semua on" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Installing package %s" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Checking device and configuring HPOJ..." +msgstr "dan." + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"To have more partitions, please delete one to be able to create an extended " +"partition" +msgstr "Kepada" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Your printer was configured automatically to give you access to the photo " +"card drives from your PC. Now you can access your photo cards using the " +"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> " +"\"MTools File Manager\") or the command line utilities \"mtools\" (enter " +"\"man mtools\" on the command line for more info). You find the card's file " +"system under the drive letter \"p:\", or subsequent drive letters when you " +"have more than one HP printer with photo card drives. In \"MtoolsFM\" you " +"can switch between drive letters with the field at the upper-right corners " +"of the file lists." +msgstr "Aplikasi Fail Fail on fail Masuk fail." + +#: ../../steps.pm:1 +#, c-format +msgid "Choose packages to install" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "ALL existing partitions and their data will be lost on drive %s" +msgstr "dan on" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "" +"Your system does not have enough space left for installation or upgrade (%d " +"> %d)" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Every printer needs a name (for example \"printer\"). The Description and " +"Location fields do not need to be filled in. They are comments for the users." +msgstr "Huraian dan Lokasi dalam." + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"\"%s\": clicking on the \"%s\" button will open the printer configuration\n" +"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n" +"information on how to setup a new printer. The interface presented there is\n" +"similar to the one used during installation." +msgstr "on on." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bhutan" +msgstr "Bhutan" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Network interface" +msgstr "Rangkaian" + +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Disconnection from Internet failed." +msgstr "Internet." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Reading printer data..." +msgstr "Membaca." + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Korean keyboard" +msgstr "Korea" + +#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 +#, c-format +msgid "Not connected" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Greek" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Saint Kitts and Nevis" +msgstr "dan" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "Generic 3 Button Mouse with Wheel emulation" +msgstr "Generik" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"Transfer successful\n" +"You may want to verify you can login to the server with:\n" +"\n" +"ssh -i %s %s\\@%s\n" +"\n" +"without being prompted for a password." +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Enable OF Boot?" +msgstr "" + +#: ../../fsedit.pm:1 +#, c-format +msgid "You can't use JFS for partitions smaller than 16MB" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Erase your RW media (1st Session)" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Monitor VertRefresh: %s\n" +msgstr "Monitor" + +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 +#, c-format +msgid "Mount point" +msgstr "" + +#: ../../Xconfig/test.pm:1 +#, fuzzy, c-format +msgid "" +"An error occurred:\n" +"%s\n" +"Try to change some parameters" +msgstr "ralat" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "TCP/IP host \"%s\", port %s" +msgstr "IP" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "User :" +msgstr "Pengguna:" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore system" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "" +"These are the machines on which the locally connected scanner(s) should be " +"available:" +msgstr "on:" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "The DHCP end ip" +msgstr "DHCP" + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, c-format +msgid "Another one" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Drakbackup" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Colombia" +msgstr "Kolombia" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "" +"Current configuration of `%s':\n" +"\n" +"Network: %s\n" +"IP address: %s\n" +"IP attribution: %s\n" +"Driver: %s" +msgstr "" + +#: ../../Xconfig/monitor.pm:1 +#, c-format +msgid "Plug'n Play" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Reunion" +msgstr "Reunion" + +#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Details" +msgstr "Perincian" + +#: ../../network/tools.pm:1 +#, c-format +msgid "For security reasons, it will be disconnected now." +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Synchronization tool" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Checking your system..." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Print" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Insert the tape with volume label %s\n" +" in the tape drive device %s" +msgstr "" +"\n" +" dalam" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Mongolia" +msgstr "Mongolia" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Mounted\n" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Configure CUPS" +msgstr "DHCP" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Graphical Interface" +msgstr "Grafikal" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore Users" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Encryption key for %s" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"The portmapper manages RPC connections, which are used by\n" +"protocols such as NFS and NIS. The portmap server must be running on " +"machines\n" +"which act as servers for protocols which make use of the RPC mechanism." +msgstr "dan NIS on protokol." + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Detected hardware" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Mauritius" +msgstr "Mauritius" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Myanmar (Burmese)" +msgstr "Myanmar" + +#: ../../fs.pm:1 +#, c-format +msgid "Enabling swap partition %s" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "There is no FAT partition to use as loopback (or not enough space left)" +msgstr "tidak" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Armenian (old)" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"A printer named \"%s\" already exists under %s. \n" +"Click \"Transfer\" to overwrite it.\n" +"You can also type a new name or skip this printer." +msgstr "A." + +#: ../../share/advertising/12-mdkexpert.pl:1 +#, fuzzy, c-format +msgid "" +"Find the solutions of your problems via MandrakeSoft's online support " +"platform." +msgstr "Cari." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid ", host \"%s\", port %s" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Monaco" +msgstr "Monaco" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Partitioning failed: %s" +msgstr "Pempartisyenan" + +#: ../../fs.pm:1 ../../swap.pm:1 +#, c-format +msgid "%s formatting of %s failed" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "Canada (cable)" +msgstr "Kanada" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "Floppy creation completed" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Upgrade" +msgstr "Tingkatupaya" + +#: ../../help.pm:1 +#, c-format +msgid "Workstation" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "" +"Installing package %s\n" +"%d%%" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Kyrgyzstan" +msgstr "Kyrgyzstan" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Multi-function device on USB" +msgstr "on" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "With basic documentation" +msgstr "asas" + +#: ../../services.pm:1 +#, c-format +msgid "Anacron is a periodic command scheduler." +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"You must have a root partition.\n" +"For this, create a partition (or click on an existing one).\n" +"Then choose action ``Mount point'' and set it to `/'" +msgstr "on dan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Western Sahara" +msgstr "Sahara Barat" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Proxy should be http://..." +msgstr "Proksihttp://...." + +#: ../../lang.pm:1 ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "South Africa" +msgstr "Afrika Selatan" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Eject tape after the backup" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Etherboot Floppy/ISO" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Modify printer configuration" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Choose a partition" +msgstr "" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Edit current rule" +msgstr "Edit" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "%s" +msgstr "%s" + +#: ../../mouse.pm:1 +#, c-format +msgid "Please test the mouse" +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "" +"Do not update inode access times on this file system\n" +"(e.g, for faster access on the news spool to speed up news servers)." +msgstr "on fail on." + +#: ../../mouse.pm:1 +#, c-format +msgid "3 buttons with Wheel emulation" +msgstr "" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Sticky-bit" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Other Media" +msgstr "Lain-lain" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Backup system files" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "Logitech MouseMan+" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Sector" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Qatar" +msgstr "Qatar" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "LDAP Base dn" +msgstr "LDAP Asas" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "" +"You can't select this package as there is not enough space left to install it" +msgstr "" + +#: ../../help.pm:1 +#, c-format +msgid "generate auto-install floppy" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Dialing mode" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "File sharing" +msgstr "Fail" + +#: ../../any.pm:1 +#, c-format +msgid "Clean /tmp at each boot" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Malawi" +msgstr "Malawi" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "local config: false" +msgstr "lokal" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "System settings" +msgstr "Tersendiri" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Please choose your type of mouse." +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "class of hardware device" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"These are the machines and networks on which the locally connected printer" +"(s) should be available:" +msgstr "dan on:" + +#: ../../lang.pm:1 ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "United Kingdom" +msgstr "United Kingdom" + +#: ../../services.pm:1 +#, c-format +msgid "running" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Indonesia" +msgstr "Indonesia" + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "default" +msgstr "default" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "France [SECAM]" +msgstr "Perancis" + +#: ../../any.pm:1 +#, c-format +msgid "restrict" +msgstr "" + +#: ../../pkgs.pm:1 +#, c-format +msgid "must have" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"CUPS does not support printers on Novell servers or printers sending the " +"data into a free-formed command.\n" +msgstr "on" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Senegal" +msgstr "Senegal" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Command line" +msgstr "Arahan" + +#: ../../share/advertising/08-store.pl:1 +#, fuzzy, c-format +msgid "" +"Our full range of Linux solutions, as well as special offers on products and " +"other \"goodies\", are available on our e-store:" +msgstr "penuh on dan on:" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "March" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "access to administrative files" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Error during sendmail.\n" +" Your report mail was not sent.\n" +" Please configure sendmail" +msgstr "" +"Ralat\n" +"\n" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "" +"Do not allow set-user-identifier or set-group-identifier\n" +"bits to take effect. (This seems safe, but is in fact rather unsafe if you\n" +"have suidperl(1) installed.)" +msgstr "pengguna dalam" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Montserrat" +msgstr "Montserrat" + +#: ../../help.pm:1 +#, c-format +msgid "Automatic dependencies" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Swap" +msgstr "" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Custom settings" +msgstr "Tersendiri" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore Other" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "TV card" +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Printer on SMB/Windows 95/98/NT server" +msgstr "on SMB Tetingkap" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_Configure CUPS" +msgstr "DHCP" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid ", " +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Remove selected host/network" +msgstr "Buang" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Postfix is a Mail Transport Agent, which is the program that moves mail from " +"one machine to another." +msgstr "Mel." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Uzbek (cyrillic)" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "" +"Here you can choose the key or key combination that will \n" +"allow switching between the different keyboard layouts\n" +"(eg: latin and non latin)" +msgstr "dan" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Network Hotplugging" +msgstr "Rangkaian" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, reports check result to tty." +msgstr "ya." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore From CD" +msgstr "Daripada" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"You are about to configure your computer to share its Internet connection.\n" +"With that feature, other computers on your local network will be able to use " +"this computer's Internet connection.\n" +"\n" +"Make sure you have configured your Network/Internet access using drakconnect " +"before going any further.\n" +"\n" +"Note: you need a dedicated Network Adapter to set up a Local Area Network " +"(LAN)." +msgstr "Internet on lokal Internet Rangkaian Internet Rangkaian Rangkaian." + +#: ../../network/ethernet.pm:1 +#, fuzzy, c-format +msgid "" +"Please choose which network adapter you want to use to connect to Internet." +msgstr "Internet." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Photo memory card access on your HP multi-function device" +msgstr "on" + +#: ../../share/advertising/09-mdksecure.pl:1 +#, c-format +msgid "" +"Enhance your computer performance with the help of a selection of partners " +"offering professional solutions compatible with Mandrake Linux" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "Authors: " +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Internet Connection Sharing is now disabled." +msgstr "Internet dimatikan." + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, verify checksum of the suid/sgid files." +msgstr "ya fail." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Latin American" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Japanese text printing mode" +msgstr "Jepun" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Old device file" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Info: " +msgstr "Maklumat " + +#: ../../interactive/stdio.pm:1 +#, c-format +msgid "Button `%s': %s" +msgstr "" + +#: ../../any.pm:1 ../../interactive.pm:1 ../../harddrake/sound.pm:1 +#: ../../standalone/drakbug:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1 +#: ../../standalone/service_harddrake:1 +#, c-format +msgid "Please wait" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "Genius NetMouse" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "None" +msgstr "Tiada" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "The entered IP is not correct.\n" +msgstr "IP" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please be sure that the cron daemon is included in your services." +msgstr "dalam." + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Ethernet Card" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Delete selected printer" +msgstr "Padam" + +#: ../../services.pm:1 ../../ugtk2.pm:1 +#, fuzzy, c-format +msgid "Info" +msgstr "Maklumat" + +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Install" +msgstr "Install" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Click on \"%s\" if you want to delete all data and partitions present on\n" +"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n" +"to recover any data and partitions present on this hard drive, including\n" +"any Windows data.\n" +"\n" +"Click on \"%s\" to stop this operation without losing any data and\n" +"partitions present on this hard drive." +msgstr "on dan on on dan on Tetingkap on dan on." + +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Exit install" +msgstr "Keluar" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"Everything has been configured.\n" +"You may now share Internet connection with other computers on your Local " +"Area Network, using automatic network configuration (DHCP)." +msgstr "Semuanya Internet on Rangkaian DHCP." + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Remote CUPS server" +msgstr "" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "Sun - Mouse" +msgstr "Sun" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"There is only one configured network adapter on your system:\n" +"\n" +"%s\n" +"\n" +"I am about to setup your Local Area Network with that adapter." +msgstr "on am Rangkaian." + +#: ../../install_steps_gtk.pm:1 +#, fuzzy, c-format +msgid "Minimal install" +msgstr "Minima" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Ethiopia" +msgstr "Ethiopia" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Enable \"crontab\" and \"at\" for users" +msgstr "dan" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Devanagari" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"- pci devices: this gives the PCI slot, device and function of this card\n" +"- eide devices: the device is either a slave or a master device\n" +"- scsi devices: the scsi bus and the scsi device ids" +msgstr "dan dan" + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Total size: %d / %d MB" +msgstr "Jumlah" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "disabled" +msgstr "dimatikan" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Search for new scanners" +msgstr "Cari" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Disabling servers..." +msgstr "" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Installation of %s failed. The following error occured:" +msgstr "ralat:" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." +msgstr "" + +#: ../../install_any.pm:1 +#, fuzzy, c-format +msgid "" +"You have selected the following server(s): %s\n" +"\n" +"\n" +"These servers are activated by default. They don't have any known security\n" +"issues, but some new ones could be found. In that case, you must make sure\n" +"to upgrade as soon as possible.\n" +"\n" +"\n" +"Do you really want to install these servers?\n" +msgstr "default Masuk" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Network printer (TCP/Socket)" +msgstr "Rangkaian" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup User files..." +msgstr "Pengguna fail." + +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Install system" +msgstr "Install" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "First DNS Server (optional)" +msgstr "Pelayan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Alternatively, you can specify a device name/file name in the input line" +msgstr "fail dalam" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"If SERVER_LEVEL (or SECURE_LEVEL if absent)\n" +"is greater than 3 in /etc/security/msec/security.conf, creates the\n" +"symlink /etc/security/msec/server to point to\n" +"/etc/security/msec/server.<SERVER_LEVEL>.\n" +"\n" +"The /etc/security/msec/server is used by chkconfig --add to decide to\n" +"add a service if it is present in the file during the installation of\n" +"packages." +msgstr "dalam<SERVER_LEVEL> dalam fail." + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Russian (Phonetic)" +msgstr "Russia" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "dhcpd Config..." +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The setup has already been done, but it's currently disabled." +msgstr "siap dimatikan." + +#: ../../any.pm:1 +#, c-format +msgid "LILO/grub Installation" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Israeli" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer \"%s\" on server \"%s\"" +msgstr "on" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Floppy can be removed now" +msgstr "" + +#: ../../help.pm:1 +#, c-format +msgid "Truly minimal install" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Denmark" +msgstr "Denmark" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Moving partition..." +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "(This) DHCP Server IP" +msgstr "DHCP Pelayan" + +#: ../../Xconfig/test.pm:1 +#, fuzzy, c-format +msgid "Test of the configuration" +msgstr "Ujian" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Installing %s ..." +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"If you told the installer that you wanted to individually select packages,\n" +"it will present a tree containing all packages classified by groups and\n" +"subgroups. While browsing the tree, you can select entire groups,\n" +"subgroups, or individual packages.\n" +"\n" +"Whenever you select a package on the tree, a description appears on the\n" +"right to let you know the purpose of the package.\n" +"\n" +"!! If a server package has been selected, either because you specifically\n" +"chose the individual package or because it was part of a group of packages,\n" +"you will be asked to confirm that you really want those servers to be\n" +"installed. By default Mandrake Linux will automatically start any installed\n" +"services at boot time. Even if they are safe and have no known issues at\n" +"the time the distribution was shipped, it is entirely possible that that\n" +"security holes were discovered after this version of Mandrake Linux was\n" +"finalized. If you do not know what a particular service is supposed to do\n" +"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n" +"install the listed services and they will be started automatically by\n" +"default during boot. !!\n" +"\n" +"The \"%s\" option is used to disable the warning dialog which appears\n" +"whenever the installer automatically selects a package to resolve a\n" +"dependency issue. Some packages have relationships between each other such\n" +"that installation of a package requires that some other program is also\n" +"rerquired to be installed. The installer can determine which packages are\n" +"required to satisfy a dependency to successfully complete the installation.\n" +"\n" +"The tiny floppy disk icon at the bottom of the list allows you to load a\n" +"package list created during a previous installation. This is useful if you\n" +"have a number of machines that you wish to configure identically. Clicking\n" +"on this icon will ask you to insert a floppy disk previously created at the\n" +"end of another installation. See the second tip of last step on how to\n" +"create such a floppy." +msgstr "dan on on default mula dan tidak dan amaran on." + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Choose your filesystem encryption key" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Sierra Leone" +msgstr "Sierra Leone" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Botswana" +msgstr "Botswana" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Andorra" +msgstr "Andorra" + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "(default value: %s)" +msgstr "default" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Set password aging to \"max\" days and delay to change to \"inactive\"." +msgstr "hari dan." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Alternative test page (Letter)" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"DHCP Server Configuration.\n" +"\n" +"Here you can select different options for the DHCP server configuration.\n" +"If you don't know the meaning of an option, simply leave it as it is.\n" +"\n" +msgstr "DHCP Pelayan Konfigurasikan DHCP" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Choose an X server" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Swap partition size in MB: " +msgstr "dalam " + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "No changes to backup!" +msgstr "Tidak!" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Formatted\n" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Type of install" +msgstr "Jenis" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer \"%s\" on SMB/Windows server \"%s\"" +msgstr "on SMB Tetingkap" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"- Daemon (%s) include:\n" +msgstr "" + +#: ../../modules/parameters.pm:1 +#, c-format +msgid "%d comma separated numbers" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"The rusers protocol allows users on a network to identify who is\n" +"logged in on other responding machines." +msgstr "on dalam on." + +#: ../../standalone/drakautoinst:1 +#, c-format +msgid "Automatic Steps Configuration" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Barbados" +msgstr "Barbados" + +#: ../../share/advertising/02-community.pl:1 +#, fuzzy, c-format +msgid "" +"Want to know more and to contribute to the Open Source community? Get " +"involved in the Free Software world!" +msgstr "dan Buka dalam Bebas!" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Please select data to backup..." +msgstr "" + +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "" +"Connection failed.\n" +"Verify your configuration in the Mandrake Control Center." +msgstr "dalam." + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "received" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Enable su only from the wheel group members or for any user" +msgstr "" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "/File/_New" +msgstr "Fail" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The DNS Server IP" +msgstr "Pelayan" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "IP Range End:" +msgstr "IP Akhir:" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "High" +msgstr "Tinggi" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Add a new printer to the system" +msgstr "Tambah Kumpulan" + +#: ../../any.pm:1 +#, c-format +msgid "NoVideo" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "this field describes the device" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Adding printer to Star Office/OpenOffice.org/GIMP" +msgstr "Pejabat" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Local Printers" +msgstr "" + +#: ../../standalone/drakpxe:1 +#, c-format +msgid "Installation image directory" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "NIS Server" +msgstr "NIS" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Port: %s" +msgstr "Liang" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Spain" +msgstr "Sepanyol" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "local config: %s" +msgstr "lokal" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "This user name has already been added" +msgstr "pengguna" + +#: ../../interactive.pm:1 +#, c-format +msgid "Choose a file" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Apply" +msgstr "Terap" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Auto-detect available ports" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "San Marino" +msgstr "San Marino" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Internet Connection Sharing currently disabled" +msgstr "Internet" + +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "Belgium" +msgstr "Belgium" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Kuwait" +msgstr "Kuwait" + +#: ../../any.pm:1 +#, c-format +msgid "Choose the window manager to run:" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "December" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "sub generation of the cpu" +msgstr "" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "First Time Wizard" +msgstr "Masa" + +#: ../../install_steps.pm:1 +#, fuzzy, c-format +msgid "" +"An error occurred, but I don't know how to handle it nicely.\n" +"Continue at your own risk." +msgstr "ralat." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Taiwan" +msgstr "Taiwan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Pakistan" +msgstr "Pakistan" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "please wait, parsing file: %s" +msgstr "fail" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Importance: " +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To be able to print with your Lexmark inkjet and this configuration, you " +"need the inkjet printer drivers provided by Lexmark (http://www.lexmark." +"com/). Click on the \"Drivers\" link. Then choose your model and afterwards " +"\"Linux\" as operating system. The drivers come as RPM packages or shell " +"scripts with interactive graphical installation. You do not need to do this " +"configuration by the graphical frontends. Cancel directly after the license " +"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and " +"adjust the head alignment settings with this program." +msgstr "Kepada danhttp://www.lexmark.com/ on dan Batal dan." + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Permissions" +msgstr "Keizinan" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Provider name (ex provider.net)" +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, fuzzy, c-format +msgid "" +"Your system is low on resources. You may have some problem installing\n" +"Mandrake Linux. If that occurs, you can try a text install instead. For " +"this,\n" +"press `F1' when booting on CDROM, then enter `text'." +msgstr "on on." + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Use the Windows partition for loopback" +msgstr "Tetingkap" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Armenian (typewriter)" +msgstr "" + +#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 +#, c-format +msgid "Connection type: " +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Graphical interface" +msgstr "Grafikal" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Chad" +msgstr "Chad" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "India" +msgstr "India" + +#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 +#, c-format +msgid "XFree %s with 3D hardware acceleration" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Slovakia" +msgstr "Slovakia" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Singapore" +msgstr "Singapura" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Cambodia" +msgstr "Cambodia" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Monitor HorizSync: %s\n" +msgstr "Monitor" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Path" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"Here you can specify any arbitrary command line into which the job should be " +"piped instead of being sent directly to a printer." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The printing system (%s) will not be started automatically when the machine " +"is booted.\n" +"\n" +"It is possible that the automatic starting was turned off by changing to a " +"higher security level, because the printing system is a potential point for " +"attacks.\n" +"\n" +"Do you want to have the automatic starting of the printing system turned on " +"again?" +msgstr "off on?" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Printer %s\n" +"What do you want to modify on this printer?" +msgstr "on?" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Add host" +msgstr "Tambah" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "" +"If you really think that you know which driver is the right one for your " +"card\n" +"you can pick one in the above list.\n" +"\n" +"The current driver for your \"%s\" sound card is \"%s\" " +msgstr "dalam " + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"Would you like to allow users to share some of their directories?\n" +"Allowing this will permit users to simply click on \"Share\" in konqueror " +"and nautilus.\n" +"\n" +"\"Custom\" permit a per-user granularity.\n" +msgstr "on Kongsi dalam dan Tersendiri pengguna" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Please choose load or save package selection on floppy.\n" +"The format is the same as auto_install generated floppies." +msgstr "on." + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "China (broadcast)" +msgstr "China" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Use quota for backup files." +msgstr "fail." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Configuring printer \"%s\"..." +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "" +"Do not allow execution of any binaries on the mounted\n" +"file system. This option might be useful for a server that has file systems\n" +"containing binaries for architectures other than its own." +msgstr "on terpasang fail." + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "Internet connection" +msgstr "Internet" + +#: ../../modules/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Loading module %s failed.\n" +"Do you want to try again with other parameters?" +msgstr "Memuatkan?" + +#: ../../share/advertising/01-thanks.pl:1 +#, fuzzy, c-format +msgid "Welcome to the Open Source world." +msgstr "Selamat Datang Buka." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bosnia and Herzegovina" +msgstr "Bosnia Herzegovina" + +#: ../../fsedit.pm:1 +#, c-format +msgid "" +"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " +"point\n" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "You must enter a host name or an IP address.\n" +msgstr "IP" + +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "Netherlands" +msgstr "Belanda" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Sending files by FTP" +msgstr "fail" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "Internal ISDN card" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "" +"There's no known OSS/ALSA alternative driver for your sound card (%s) which " +"currently uses \"%s\"" +msgstr "tidak" + +#: ../../network/modem.pm:1 +#, fuzzy, c-format +msgid "Title" +msgstr "Tajuk" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Install & convert Fonts" +msgstr "Install" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "WARNING" +msgstr "AMARAN" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Installing bootloader" +msgstr "" + +#: ../../standalone/drakautoinst:1 +#, c-format +msgid "replay" +msgstr "" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "detected %s" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Expect is an extension to the Tcl scripting language that allows interactive " +"sessions without user intervention." +msgstr "pengguna." + +#: ../../lang.pm:1 +#, c-format +msgid "Virgin Islands (U.S.)" +msgstr "Virgin Islands (Amerika)" + +#: ../../partition_table.pm:1 +#, c-format +msgid "Bad backup file" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"The setup of Internet connection sharing has already been done.\n" +"It's currently disabled.\n" +"\n" +"What would you like to do?" +msgstr "Internet siap dimatikan?" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Enter IP address and port of the host whose printers you want to use." +msgstr "Enter IP dan." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Pipe into command" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Some hardware on your computer needs ``proprietary'' drivers to work.\n" +"You can find some information about them at: %s" +msgstr "on" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Haiti" +msgstr "Haiti" + +#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 +#, c-format +msgid "Detecting devices..." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Custom allows you to specify your own day and time. The other options use " +"run-parts in /etc/crontab." +msgstr "Tersendiri dan dalam." + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"Description of the fields:\n" +"\n" +msgstr "Huraian" + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "Basic options" +msgstr "Asas" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "the name of the CPU" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Accept bogus IPv4 error messages" +msgstr "Terima ralat" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Refreshing printer data..." +msgstr "" + +#: ../../install2.pm:1 +#, c-format +msgid "You must also format %s" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Be careful: this operation is dangerous." +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Insert a floppy containing package selection" +msgstr "" + +#: ../../diskdrake/dav.pm:1 +#, fuzzy, c-format +msgid "Server: " +msgstr "Pelayan " + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "Security Alerts:" +msgstr "Keselamatan:" + +#: ../../crypto.pm:1 ../../lang.pm:1 +#, fuzzy, c-format +msgid "Sweden" +msgstr "Sweden" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use Expect for SSH" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Poland" +msgstr "Poland" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Other ports" +msgstr "Liang Lain" + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "number of capture buffers for mmap'ed capture" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "SMBus controllers" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Connection timeout (in sec)" +msgstr "dalam" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "" +"Some of the early i486DX-100 chips cannot reliably return to operating mode " +"after the \"halt\" instruction is used" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Croatian" +msgstr "Croatia" + +#: ../../help.pm:1 +#, c-format +msgid "Use existing partition" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Unable to contact mirror %s" +msgstr "" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "/Help/_About..." +msgstr "Bantuan Perihal." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Remove user directories before restore." +msgstr "Buang pengguna." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"You are going to configure a remote printer. This needs working network " +"access, but your network is not configured yet. If you go on without network " +"configuration, you will not be able to use the printer which you are " +"configuring now. How do you want to proceed?" +msgstr "on?" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "CUPS printer configuration" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "could not find any font in your mounted partitions" +msgstr "dalam terpasang" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "F00f bug" +msgstr "" + +#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1 +#, c-format +msgid "XFree %s" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Domain Name:" +msgstr "Domain Nama:" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Root umask" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "On Floppy" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Reboot by the console user" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, check if the network devices are in promiscuous mode." +msgstr "ya dalam." + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Looking for available packages..." +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Init Message" +msgstr "" + +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Rescue partition table" +msgstr "Penyelamatan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Cyprus" +msgstr "Cyprus" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Connection complete." +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Remove from RAID" +msgstr "Buang" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "This encryption key is too simple (must be at least %d characters long)" +msgstr "" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Configuration Wizards" +msgstr "Konfigurasikan" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "ISDN connection" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "CD-R / DVD-R" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "primary" +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid " on SMB/Windows server \"%s\", share \"%s\"" +msgstr "on SMB Tetingkap" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"This dialog is used to choose which services you wish to start at boot\n" +"time.\n" +"\n" +"DrakX will list all the services available on the current installation.\n" +"Review each one carefully and uncheck those which are not needed at boot\n" +"time.\n" +"\n" +"A short explanatory text will be displayed about a service when it is\n" +"selected. However, if you are not sure whether a service is useful or not,\n" +"it is safer to leave the default behavior.\n" +"\n" +"!! At this stage, be very careful if you intend to use your machine as a\n" +"server: you will probably not want to start any services that you do not\n" +"need. Please remember that several services can be dangerous if they are\n" +"enabled on a server. In general, select only the services you really need.\n" +"!!" +msgstr "mula on dan default mula on Masuk!" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Niue" +msgstr "Niue" + +#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Skip" +msgstr "Langkah" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Activates/Deactivates all network interfaces configured to start\n" +"at boot time." +msgstr "mula." + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"the CPU frequency in MHz (Megahertz which in first approximation may be " +"coarsely assimilated to number of instructions the cpu is able to execute " +"per second)" +msgstr "dalam dalam" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "Mandrake Linux Printer Management Tool" +msgstr "" + +#: ../../pkgs.pm:1 +#, c-format +msgid "important" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Total Progress" +msgstr "Jumlah" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n" +" \t\tFor users to be able to log into the system from a diskless " +"client, their entry in\n" +" \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$" +"\\$. drakTermServ helps\n" +" \t\tin this respect by adding or removing system users from this " +"file." +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"DrakX will first detect any IDE devices present in your computer. It will\n" +"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n" +"found, DrakX will automatically install the appropriate driver.\n" +"\n" +"Because hardware detection is not foolproof, DrakX may fail in detecting\n" +"your hard drives. If so, you'll have to specify your hardware by hand.\n" +"\n" +"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n" +"want to configure options for it. You should allow DrakX to probe the\n" +"hardware for the card-specific options which are needed to initialize the\n" +"adapter. Most of the time, DrakX will get through this step without any\n" +"issues.\n" +"\n" +"If DrakX is not able to probe for the options to automatically determine\n" +"which parameters need to be passed to the hardware, you'll need to manually\n" +"configure the driver." +msgstr "dalam on dalam secara manual secara manual." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Aruba" +msgstr "Aruba" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Users" +msgstr "Pengguna" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Preparing bootloader..." +msgstr "" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Gateway (e.g. %s)" +msgstr "Gateway" + +#: ../../any.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "The passwords do not match" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Examples for correct IPs:\n" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Please choose the media for backup." +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Frequency (MHz)" +msgstr "" + +#: ../../install_any.pm:1 +#, fuzzy, c-format +msgid "" +"To use this saved packages selection, boot installation with ``linux " +"defcfg=floppy''" +msgstr "Kepada" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "the number of the processor" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Hardware clock set to GMT" +msgstr "Perkakasan" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "Do you want to start a new configuration ?" +msgstr "mula?" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Give a file name" +msgstr "fail" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Please choose the port that your printer is connected to." +msgstr "" + +#: ../../standalone/livedrake:1 +#, fuzzy, c-format +msgid "Change Cd-Rom" +msgstr "Ubah" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Paraguay" +msgstr "Paraguay" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "Configuration is complete, do you want to apply settings ?" +msgstr "Konfigurasikan?" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use Incremental/Differential Backups (do not replace old backups)" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "There's no known driver for your sound card (%s)" +msgstr "tidak" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "force" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Exit" +msgstr "Keluar" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"NOTE: Depending on the printer model and the printing system up to %d MB of " +"additional software will be installed." +msgstr "on dan." + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "" +"You don't have any configured interface.\n" +"Configure them first by clicking on 'Configure'" +msgstr "on" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Estonian" +msgstr "Estonia" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Apache is a World Wide Web server. It is used to serve HTML files and CGI." +msgstr "fail dan." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Enter your CD Writer device name\n" +" ex: 0,1,0" +msgstr "Enter\n" + +#: ../../standalone/draksec:1 +#, c-format +msgid "ALL" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Add/Del Clients" +msgstr "Tambah" + +#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1 +#: ../../standalone/drakpxe:1 +#, c-format +msgid "Choose the network interface" +msgstr "" + +#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Unknown Model" +msgstr "Entah" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "CD/DVD burners" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Partition booted by default\n" +" (for MS-DOS boot, not for lilo)\n" +msgstr "Partisyen default\n" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Enable \"%s\" to read the file" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "choose image" +msgstr "" + +#: ../../network/shorewall.pm:1 +#, c-format +msgid "Firewalling configuration detected!" +msgstr "" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Connection name" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "" +"x coordinate of text box\n" +"in number of characters" +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Updating package selection" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Where do you want to mount the loopback file %s?" +msgstr "fail?" + +#: ../../standalone/drakautoinst:1 +#, c-format +msgid "" +"The floppy has been successfully generated.\n" +"You may now replay your installation." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use CD-R/DVD-R to backup" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "the number of buttons the mouse has" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Replay" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Backup other files" +msgstr "" + +#: ../../install_steps.pm:1 +#, fuzzy, c-format +msgid "No floppy drive available" +msgstr "Tidak" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup files are corrupted" +msgstr "fail" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "TV norm:" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Cpuid family" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "32 MB" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "type: thin" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Lithuanian AZERTY (new)" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "yes means the arithmetic coprocessor has an exception vector attached" +msgstr "ya" + +#: ../../fsedit.pm:1 +#, fuzzy, c-format +msgid "" +"You've selected a software RAID partition as root (/).\n" +"No bootloader is able to handle this without a /boot partition.\n" +"Please be sure to add a /boot partition" +msgstr "RAD" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Other OS (MacOS...)" +msgstr "Lain-lain" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "To activate the mouse," +msgstr "Kepada" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Bringing up the network" +msgstr "" + +#: ../../common.pm:1 +#, fuzzy, c-format +msgid "Screenshots will be available after install in %s" +msgstr "dalam" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"More than one Microsoft partition has been detected on your hard drive.\n" +"Please choose which one you want to resize in order to install your new\n" +"Mandrake Linux operating system.\n" +"\n" +"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" +"\"Capacity\".\n" +"\n" +"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc.\n" +"\n" +"\"Windows name\" is the letter of your hard drive under Windows (the first\n" +"disk or partition is called \"C:\")." +msgstr "" +"on dalam Tetingkap dan\n" +" on\n" +" on\n" +" on\n" +" on Tetingkap Tetingkap C." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Tanzania" +msgstr "Tanzania" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Computing FAT filesystem bounds" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +"Backup Sources: \n" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "custom" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Content of the file" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Authentication LDAP" +msgstr "Pengesahan" + +#: ../../harddrake/sound.pm:1 +#, c-format +msgid "Let me pick any driver" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Profile " +msgstr "" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "transmitted" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Palestine" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "RAID md%s\n" +msgstr "RAD" + +#: ../../modules/parameters.pm:1 +#, c-format +msgid "%d comma separated strings" +msgstr "" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid " isdn" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Here is the full list of keyboards available" +msgstr "penuh" + +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Theme name" +msgstr "Tema" + +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_Help" +msgstr "/_Bantuan" + +#: ../../harddrake/sound.pm:1 +#, c-format +msgid "Choosing an arbitrary driver" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Cook Islands" +msgstr "Kepulauan Cook" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "" +"Here you can choose whether the scanners connected to this machine should be " +"accessable by remote machines and by which remote machines." +msgstr "dan." + +#: ../../standalone/draksplash:1 +#, c-format +msgid "the width of the progress bar" +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "Formatting partition %s" +msgstr "Memformat" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Hostname required" +msgstr "Namahos" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Unselect fonts installed" +msgstr "" + +#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 +#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1 +#: ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 +#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 +#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 +#: ../../standalone/drakgw:1 ../../standalone/drakperm:1 +#: ../../standalone/draksec:1 ../../standalone/logdrake:1 +#: ../../standalone/mousedrake:1 ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Cancel" +msgstr "Batal" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Searching for configured scanners ..." +msgstr "Mencari." + +#: ../../mouse.pm:1 +#, c-format +msgid "Wheel" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Videocard" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "\tBackups use tar and bzip2\n" +msgstr "dan" + +#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Remove Selected" +msgstr "Buang" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "/Autodetect _modems" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Remove printer" +msgstr "Buang" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "View Last Log" +msgstr "" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Which services would you like to allow the Internet to connect to?" +msgstr "Internet?" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Connection Type" +msgstr "Jenis Perhubungan:" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "" +"Welcome to the mail configuration utility.\n" +"\n" +"Here, you'll be able to set up the alert system.\n" +msgstr "Selamat Datang" + +#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Other" +msgstr "Lain-lain" + +#: ../../any.pm:1 ../../harddrake/v4l.pm:1 ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "Default" +msgstr "Default" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Button 2 Emulation" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Run chkrootkit checks" +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "type1inst building" +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Abiword" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "choose image file" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "X server" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Domain Admin User Name" +msgstr "Domain Pengguna" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "There was an error while scanning for TV channels" +msgstr "ralat" + +#: ../../keyboard.pm:1 +#, c-format +msgid "US keyboard (international)" +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Not installed" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Both Alt keys simultaneously" +msgstr "Alt" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "LAN connection" +msgstr "" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "/File/-" +msgstr "Fail" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Italian" +msgstr "Itali" + +#: ../../interactive.pm:1 +#, fuzzy, c-format +msgid "Basic" +msgstr "Asas" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "" +"\n" +" Copyright (C) 2002 by MandrakeSoft \n" +"\tStew Benedict sbenedict\\@mandrakesoft.com\n" +"\n" +msgstr "" +"\n" +" C" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Honduras" +msgstr "Honduras" + +#: ../../help.pm:1 +#, c-format +msgid "pdq" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Card IO" +msgstr "" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "when checked, owner and group won't be changed" +msgstr "dan" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "" +"\n" +"This special Bootstrap\n" +"partition is for\n" +"dual-booting your system.\n" +msgstr "" + +#: ../../standalone/drakautoinst:1 +#, c-format +msgid "" +"Please choose for each step whether it will replay like your install, or it " +"will be manual" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "" +"You can also decide here whether scanners on remote machines should be made " +"available on this machine." +msgstr "on on." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "\t-Network by FTP.\n" +msgstr "Rangkaian FTP" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Reports check result to tty" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "You must enter a device or file name!" +msgstr "fail!" + +#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 +#, c-format +msgid "/_Quit" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Graphics memory: %s kB\n" +msgstr "Grafik" + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "" +"This program is free software; you can redistribute it and/or modify\n" +"it under the terms of the GNU General Public License as published by\n" +"the Free Software Foundation; either version 2, or (at your option)\n" +"any later version.\n" +"\n" +"This program is distributed in the hope that it will be useful,\n" +"but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +"GNU General Public License for more details.\n" +"\n" +"You should have received a copy of the GNU General Public License\n" +"along with this program; if not, write to the Free Software\n" +"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" +msgstr "dan Umum Bebas dalam A Umum Umum Bebas" + +#: ../../any.pm:1 +#, c-format +msgid "access to compilation tools" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Please select data to restore..." +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "" +"If you plan to use aboot, be carefull to leave a free space (2048 sectors is " +"enough)\n" +"at the beginning of the disk" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Standard test page" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Create" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "What" +msgstr "" + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "There was an error ordering packages:" +msgstr "ralat:" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Bulgarian (BDS)" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Disable Server" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Filesystem encryption key" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Gujarati" +msgstr "" + +#: ../../interactive/stdio.pm:1 +#, fuzzy, c-format +msgid "" +"Please choose the first number of the 10-range you wish to edit,\n" +"or just hit Enter to proceed.\n" +"Your choice? " +msgstr "Enter " + +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Save theme" +msgstr "Simpan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Brazil" +msgstr "Brazil" + +#: ../../standalone/drakautoinst:1 +#, c-format +msgid "Auto Install" +msgstr "" + +#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "Network Configuration Wizard" +msgstr "Rangkaian Konfigurasikan" + +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Removable media automounting" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Enter the directory to save:" +msgstr "Enter direktori:" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Printing" +msgstr "Cetakan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"There are no printers found which are directly connected to your machine" +msgstr "tidak" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Create a new partition" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "Driver:" +msgstr "Jurupacu:" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "unknown" +msgstr "tidak diketahui" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Use fdisk" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "MOVE YOUR WHEEL!" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "sent: " +msgstr "" + +#: ../../network/network.pm:1 +#, c-format +msgid "Automatic IP" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"There you are. Installation is now complete and your GNU/Linux system is\n" +"ready to use. Just click \"%s\" to reboot the system. The first thing you\n" +"should see after your computer has finished doing its hardware tests is the\n" +"bootloader menu, giving you the choice of which operating system to start.\n" +"\n" +"The \"%s\" button shows two more buttons to:\n" +"\n" +" * \"%s\": to create an installation floppy disk that will automatically\n" +"perform a whole installation without the help of an operator, similar to\n" +"the installation you just configured.\n" +"\n" +" Note that two different options are available after clicking the button:\n" +"\n" +" * \"%s\". This is a partially automated installation. The partitioning\n" +"step is the only interactive procedure.\n" +"\n" +" * \"%s\". Fully automated installation: the hard disk is completely\n" +"rewritten, all data is lost.\n" +"\n" +" This feature is very handy when installing a number of similar machines.\n" +"See the Auto install section on our web site for more information.\n" +"\n" +" * \"%s\"(*): saves a list of the packages selected in this installation.\n" +"To use this selection with another installation, insert the floppy and\n" +"start the installation. At the prompt, press the [F1] key and type >>linux\n" +"defcfg=\"floppy\" <<.\n" +"\n" +"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" +"\"mformat a:\")" +msgstr "" +"dan mula\n" +"\n" +"\n" +"\n" +"\n" +" on\n" +" dalam dan dan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Moldova" +msgstr "Moldova" + +#: ../../mouse.pm:1 +#, c-format +msgid "Kensington Thinking Mouse" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Configuration of a remote printer" +msgstr "Konfigurasikan" + +#: ../../share/advertising/13-mdkexpert_corporate.pl:1 +#, c-format +msgid "An online platform to respond to enterprise support needs." +msgstr "" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "URL should begin with 'ftp:' or 'http:'" +msgstr "URL" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Oriya" +msgstr "" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Add a new rule at the end" +msgstr "Tambah" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "LiLo and Bootsplash themes installation successful" +msgstr "dan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"You can also decide here whether printers on remote machines should be " +"automatically made available on this machine." +msgstr "on on." + +#: ../../modules/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"You may now provide options to module %s.\n" +"Options are in format ``name=value name2=value2 ...''.\n" +"For instance, ``io=0x300 irq=7''" +msgstr "dalam" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Quit without writing the partition table?" +msgstr "Keluar?" + +#: ../../mouse.pm:1 +#, c-format +msgid "Genius NetScroll" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "On Hard Drive" +msgstr "on" + +#: ../../standalone.pm:1 +#, c-format +msgid "Installing packages..." +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Dutch" +msgstr "Belanda" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Angola" +msgstr "Angola" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "The following packages need to be installed:\n" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "service setting" +msgstr "" + +#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 +#, fuzzy, c-format +msgid "Custom" +msgstr "Tersendiri" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Latvia" +msgstr "Latvia" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "File is already used by another loopback, choose another one" +msgstr "Fail" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Read-only" +msgstr "" + +#: ../../security/help.pm:1 +#, c-format +msgid "" +"Enable/Disable name resolution spoofing protection. If\n" +"\"alert\" is true, also reports to syslog." +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "No known driver" +msgstr "Tidak" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "1 MB" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"If it is not the one you want to configure, enter a device name/file name in " +"the input line" +msgstr "fail dalam" + +#: ../../standalone/draksound:1 +#, fuzzy, c-format +msgid "" +"No Sound Card has been detected on your machine. Please verify that a Linux-" +"supported Sound Card is correctly plugged in.\n" +"\n" +"\n" +"You can visit our hardware database at:\n" +"\n" +"\n" +"http://www.linux-mandrake.com/en/hardware.php3" +msgstr "" +"Tidak Bunyi on Bunyi dalam\n" +"http://www.linux-mandrake.com/en/hardware.php3" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific " +"entry for\n" +"\t\t\ta client machine, using a fixed address scheme facilitates using the " +"functionality\n" +"\t\t\tof client-specific configuration files that ClusterNFS provides.\n" +"\t\t\t\n" +"\t\t\tNote: The \"#type\" entry is only used by drakTermServ. Clients can " +"either be 'thin'\n" +"\t\t\tor 'fat'. Thin clients run most software on the server via xdmcp, " +"while fat clients run \n" +"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$" +"\\$IP=client_ip\\$\\$ is\n" +"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and " +"gdm.conf are \n" +"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are " +"security issues in \n" +"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access " +"to the local\n" +"\t\t\tsubnet.\n" +"\t\t\t\n" +"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ. " +"Clients can either \n" +"\t\t\tbe 'true' or 'false'. 'true' enables root login at the client machine " +"and allows local \n" +"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. " +"This is enabled \n" +"\t\t\tby creating separate config files associated with the client's IP " +"address and creating \n" +"\t\t\tread/write mount points to allow the client to alter the file. Once " +"you are satisfied \n" +"\t\t\twith the configuration, you can remove root login privileges from the " +"client.\n" +"\t\t\t\n" +"\t\t\tNote: You must stop/start the server after adding or changing clients." +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Configure Local Area Network..." +msgstr "Rangkaian." + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Verify checksum of the suid/sgid files" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Launch the sound system on your machine" +msgstr "on" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Run some checks against the rpm database" +msgstr "" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Execute" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Preparing printer database..." +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Information" +msgstr "Maklumat" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "No network card" +msgstr "Tidak" + +#: ../../mouse.pm:1 +#, c-format +msgid "3 buttons" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 +#, c-format +msgid "Which filesystem do you want?" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Malta" +msgstr "Malta" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Detailed information" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Printer default settings\n" +"\n" +"You should make sure that the page size and the ink type/printing mode (if " +"available) and also the hardware configuration of laser printers (memory, " +"duplex unit, extra trays) are set correctly. Note that with a very high " +"printout quality/resolution printing can get substantially slower." +msgstr "default dan dan." + +#: ../../install_any.pm:1 +#, c-format +msgid "This floppy is not FAT formatted" +msgstr "" + +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#, c-format +msgid "Configuring network" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"This option will save files that have changed. Exact behavior depends on " +"whether incremental or differential mode is used." +msgstr "fail on." + +#: ../../Xconfig/main.pm:1 +#, c-format +msgid "Graphic Card" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Resizing Windows partition" +msgstr "Tetingkap" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Cameroon" +msgstr "Cameroon" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Provider dns 1 (optional)" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"You can now partition %s.\n" +"When you are done, don't forget to save using `w'" +msgstr "siap" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Saami (swedish/finnish)" +msgstr "" + +#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 +#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1 +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Close" +msgstr "Tutup" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"\"%s\": check the current country selection. If you are not in this\n" +"country, click on the \"%s\" button and choose another one. If your country\n" +"is not in the first list shown, click the \"%s\" button to get the complete\n" +"country list." +msgstr "dalam on dan dalam." + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Calendar" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"Restore Selected\n" +"Catalog Entry" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To use a remote lpd printer, you need to supply the hostname of the printer " +"server and the printer name on that server." +msgstr "Kepada lpd dan on." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Iceland" +msgstr "Iceland" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Network & Internet Configuration" +msgstr "Konfigurasi Rangkaian" + +#: ../../common.pm:1 +#, c-format +msgid "consolehelper missing" +msgstr "" + +#: ../../services.pm:1 +#, c-format +msgid "stopped" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Whether the FPU has an irq vector" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Ext2" +msgstr "" + +#: ../../ugtk2.pm:1 +#, c-format +msgid "Expand Tree" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "" +"The old \"%s\" driver is blacklisted.\n" +"\n" +"It has been reported to oops the kernel on unloading.\n" +"\n" +"The new \"%s\" driver'll only be used on next bootstrap." +msgstr "on on." + +#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 +#, c-format +msgid "Expert Mode" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer options" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Local Network adress" +msgstr "Rangkaian" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup your System files. (/etc directory)" +msgstr "Sistem fail direktori" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Set the user umask." +msgstr "pengguna." + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"You now have the opportunity to download updated packages. These packages\n" +"have been updated after the distribution was released. They may\n" +"contain security or bug fixes.\n" +"\n" +"To download these packages, you will need to have a working Internet \n" +"connection.\n" +"\n" +"Do you want to install the updates ?" +msgstr "Internet?" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Samba Server" +msgstr "Pengguna Samba" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "Australian Optus cable TV" +msgstr "" + +#: ../../install_steps_newt.pm:1 +#, fuzzy, c-format +msgid "" +" <Tab>/<Alt-Tab> between elements | <Space> selects | <F12> next screen " +msgstr "" +" <Tab>/<Alt-Tab> Antara unsur | <Space> pilih | <F12> Skrin " +"seterusnya " + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Subnet:" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Zimbabwe" +msgstr "Zimbabwe" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "When" +msgstr "" + +#: ../../network/adsl.pm:1 +#, fuzzy, c-format +msgid "" +"You need the Alcatel microcode.\n" +"Download it at:\n" +"%s\n" +"and copy the mgmt.o in /usr/share/speedtouch" +msgstr "" +"\n" +"%s dalam" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Hour" +msgstr "" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Second DNS Server (optional)" +msgstr "Pelayan" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Finland" +msgstr "Finland" + +#: ../../Xconfig/various.pm:1 +#, c-format +msgid "Color depth: %s\n" +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "You can't unselect this package. It must be upgraded" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Loading from floppy" +msgstr "Memuatkan" + +#: ../../security/help.pm:1 +#, c-format +msgid "Enable/Disable the logging of IPv4 strange packets." +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Slovenia" +msgstr "Slovenia" + +#: ../../standalone/mousedrake:1 +#, fuzzy, c-format +msgid "Mouse test" +msgstr "Tetikus" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "" +"Drakperm is used to see files to use in order to fix permissions, owners, " +"and groups via msec.\n" +"You can also edit your own rules which will owerwrite the default rules." +msgstr "fail dalam dan default." + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"Enter a user\n" +"%s" +msgstr "Enter pengguna" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"- PCI and USB devices: this lists the vendor, device, subvendor and " +"subdevice PCI/USB ids" +msgstr "dan USB dan USB" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "ProgressBar color selection" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"Here are the entries on your boot menu so far.\n" +"You can create additional entries or change the existing ones." +msgstr "on." + +#: ../../help.pm:1 +#, c-format +msgid "/dev/hda" +msgstr "" + +#: ../../help.pm:1 +#, c-format +msgid "/dev/hdb" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Maintain /etc/dhcpd.conf:\n" +" \t\tTo net boot clients, each client needs a dhcpd.conf entry, " +"assigning an IP address\n" +" \t\tand net boot images to the machine. drakTermServ helps create/" +"remove these entries.\n" +"\t\t\t\n" +" \t\t(PCI cards may omit the image - etherboot will request the " +"correct image. You should\n" +" \t\talso consider that when etherboot looks for the images, it " +"expects names like\n" +" \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n" +"\t\t\t \n" +" \t\tA typical dhcpd.conf stanza to support a diskless client looks " +"like:" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Runs commands scheduled by the at command at the time specified when\n" +"at was run, and runs batch commands when the load average is low enough." +msgstr "dan." + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "Radio support:" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Installing SANE packages..." +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "LDAP" +msgstr "LDAP" + +#: ../../bootloader.pm:1 +#, c-format +msgid "SILO" +msgstr "" + +#: ../../diskdrake/removable.pm:1 +#, fuzzy, c-format +msgid "Change type" +msgstr "Ubah" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid ", USB printer #%s" +msgstr "USB" + +#: ../../any.pm:1 +#, c-format +msgid "SILO Installation" +msgstr "" + +#: ../../install_messages.pm:1 +#, fuzzy, c-format +msgid "" +"Congratulations, installation is complete.\n" +"Remove the boot media and press return to reboot.\n" +"\n" +"\n" +"For information on fixes which are available for this release of Mandrake " +"Linux,\n" +"consult the Errata available from:\n" +"\n" +"\n" +"%s\n" +"\n" +"\n" +"Information on configuring your system is available in the post\n" +"install chapter of the Official Mandrake Linux User's Guide." +msgstr "Tahniah dan on on dalam Pengguna." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "paranoid" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Do not send mails when unneeded" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Your scanner(s) will not be available on the network." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Send mail report after each backup to:" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"This command you can also use in the \"Printing command\" field of the " +"printing dialogs of many applications. But here do not supply the file name " +"because the file to print is provided by the application.\n" +msgstr "dalam Cetakan fail fail" + +#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1 +#, fuzzy, c-format +msgid "Resolution" +msgstr "Resolusi" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To print to a SMB printer, you need to provide the SMB host name (Note! It " +"may be different from its TCP/IP hostname!) and possibly the IP address of " +"the print server, as well as the share name for the printer you wish to " +"access and any applicable user name, password, and workgroup information." +msgstr "Kepada SMB SMB IP dan IP dan pengguna dan." + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +" Enabling su only from members of the wheel group or allow su from any user." +msgstr "pengguna." + +#: ../../standalone/drakgw:1 +#, c-format +msgid "reconfigure" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "" +"Your card can have 3D hardware acceleration support with XFree %s,\n" +"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Shell timeout" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Xinetd Service" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "access to network tools" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Firmware-Upload for HP LaserJet 1000" +msgstr "" + +#: ../../share/advertising/03-software.pl:1 +#, fuzzy, c-format +msgid "" +"And, of course, push multimedia to its limits with the very latest software " +"to play videos, audio files and to handle your images or photos." +msgstr "bunyi fail dan." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Here is a list of all auto-detected printers. " +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Error installing aboot, \n" +"try to force installation even if that destroys the first partition?" +msgstr "Ralat?" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"Restore Selected\n" +"Files" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"%s exists, delete?\n" +"\n" +"Warning: If you've already done this process you'll probably\n" +" need to purge the entry from authorized_keys on the server." +msgstr "" +"siap\n" +" on." + +#: ../../network/tools.pm:1 +#, c-format +msgid "Please fill or check the field below" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Do you want to save /etc/fstab modifications" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Boot Protocol" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "LVM-disks %s\n" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "The package %s is needed. Install it?" +msgstr "Install?" + +#: ../../services.pm:1 +#, c-format +msgid "On boot" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Bus identification" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Vatican" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Please make a backup of your data first" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "You have more than one hard drive, which one do you install linux on?" +msgstr "on?" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Eritrea" +msgstr "Eritrea" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Boot ISO" +msgstr "" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "Firmware needed" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Remove List" +msgstr "Buang" + +#: ../../share/advertising/05-desktop.pl:1 +#, fuzzy, c-format +msgid "A customizable environment" +msgstr "A" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Inuktitut" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Some protocols, like rsync, may be configured at the server end. Rather " +"than using a directory path, you would use the 'module' name for the service " +"path." +msgstr "protokol direktori." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Morocco" +msgstr "Morocco" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Which printer model do you have?" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Add a new printer" +msgstr "Tambah" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " All of your selected data have been " +msgstr "Semua " + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Nepal" +msgstr "Nepal" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "<-- Delete" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "cpu # " +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "chunk size" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"If set to \"ALL\", /etc/issue and /etc/issue.net are allowed to exist.\n" +"\n" +"If set to NONE, no issues are allowed.\n" +"\n" +"Else only /etc/issue is allowed." +msgstr "dan tidak." + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid " Enable/Disable sulogin(8) in single user level." +msgstr "dalam tunggal pengguna." + +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 +#, c-format +msgid "commands before booting, or 'c' for a command-line." +msgstr "" + +#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 +#, c-format +msgid "Problems installing package %s" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "You will receive an alert if the load is higher than this value" +msgstr "" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "" +"\n" +"\n" +"To submit a bug report, click on the button report.\n" +"This will open a web browser window on https://drakbug.mandrakesoft.com\n" +" where you'll find a form to fill in.The information displayed above will " +"be \n" +"transferred to that server\n" +"\n" +msgstr "" +"on on\n" +" dalam" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Add a scanner manually" +msgstr "Tambah" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "Refresh" +msgstr "" + +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Reload partition table" +msgstr "Ulangmuat" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Yes, I want autologin with this (user, desktop)" +msgstr "Ya pengguna" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore Selected" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Search for fonts in installed list" +msgstr "Cari dalam" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The Local Network did not finish with `.0', bailing out." +msgstr "Rangkaian keluar." + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Boot" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid " and the CD is in the drive" +msgstr "" + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "Tuner type:" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Now, it's time to select a printing system for your computer. Other OSs may\n" +"offer you one, but Mandrake Linux offers two. Each of the printing system\n" +"is best suited to particular types of configuration.\n" +"\n" +" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n" +"if you have a direct connection to your printer, you want to be able to\n" +"panic out of printer jams, and you do not have networked printers. (\"%s\"\n" +"will handle only very simple network cases and is somewhat slow when used\n" +"with networks.) It's recommended that you use \"pdq\" if this is your first\n" +"experience with GNU/Linux.\n" +"\n" +" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n" +"printing to your local printer or to one halfway around the planet. It is\n" +"simple to configure and can act as a server or a client for the ancient\n" +"\"lpd \" printing system, so it compatible with older operating systems\n" +"which may still need print services. While quite powerful, the basic setup\n" +"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n" +"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n" +"front-ends for printing or choosing printer options and for managing the\n" +"printer.\n" +"\n" +"If you make a choice now, and later find that you don't like your printing\n" +"system you may change it by running PrinterDrake from the Mandrake Control\n" +"Center and clicking the expert button." +msgstr "" +"Lain-lain\n" +" keluar dan dan\n" +" Cetakan Sistem lokal dan lpd asas lpd on lpd dan dan dan." + +#: ../../keyboard.pm:1 +#, c-format +msgid "\"Menu\" key" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"\n" +"Please check whether Printerdrake did the auto-detection of your printer " +"model correctly. Find the correct model in the list when a wrong model or " +"\"Raw printer\" is highlighted." +msgstr "Cari dalam." + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "Security Administrator:" +msgstr "Keselamatan:" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Set the shell timeout. A value of zero means no timeout." +msgstr "A tidak." + +#: ../../network/adsl.pm:1 +#, c-format +msgid "Firmware copy succeeded" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, check permissions of files in the users' home." +msgstr "ya fail dalam." + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "" +"You don't have an Internet connection.\n" +"Create one first by clicking on 'Configure'" +msgstr "Internet on" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Fonts copy" +msgstr "Font" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Automated" +msgstr "" + +#: ../../Xconfig/test.pm:1 +#, c-format +msgid "Do you want to test the configuration?" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/" +"GIMP." +msgstr "Pejabat." + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Save packages selection" +msgstr "Simpan" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_Actions" +msgstr "Aksi" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Remove the last item" +msgstr "Buang" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "User list to restore (only the most recent date per user is important)" +msgstr "Pengguna pengguna" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "No net boot images created!" +msgstr "Tidak!" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "use pptp" +msgstr "" + +#: ../../services.pm:1 +#, c-format +msgid "Choose which services should be automatically started at boot time" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Check files/directories writable by everybody" +msgstr "fail" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Learn how to use this printer" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Configure the network now" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Choose a mirror from which to get the packages" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"The FAT resizer is unable to handle your partition, \n" +"the following error occured: %s" +msgstr "ralat" + +#: ../../install_steps_gtk.pm:1 +#, fuzzy, c-format +msgid "Size: " +msgstr "Saiz: " + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Which sector do you want to move it to?" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bahamas" +msgstr "Bahamas" + +#: ../../interactive/stdio.pm:1 +#, fuzzy, c-format +msgid "Do you want to click on this button?" +msgstr "on?" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Manual configuration" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "search" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"This package loads the selected keyboard map as set in\n" +"/etc/sysconfig/keyboard. This can be selected using the kbdconfig utility.\n" +"You should leave this enabled for most machines." +msgstr "dalam dihidupkan." + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Xpmac (installation display driver)" +msgstr "" + +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#, c-format +msgid "Zeroconf host name must not contain a ." +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid " Accept/Refuse icmp echo." +msgstr "Terima." + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"Syslog is the facility by which many daemons use to log messages\n" +"to various system log files. It is a good idea to always run syslog." +msgstr "fail." + +#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Unknown/Others" +msgstr "Entah" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "No TV Card detected!" +msgstr "Tidak!" + +#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1 +#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Options" +msgstr "Pilihan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "The printer \"%s\" is set as the default printer now." +msgstr "default." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"You are configuring an OKI laser winprinter. These printers\n" +"use a very special communication protocol and therefore they work only when " +"connected to the first parallel port. When your printer is connected to " +"another port or to a print server box please connect the printer to the " +"first parallel port before you print a test page. Otherwise the printer will " +"not work. Your connection type setting will be ignored by the driver." +msgstr "dan." + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "generation of the cpu (eg: 8 for PentiumIII, ...)" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Auto-detected" +msgstr "" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "" +"You are about to configure your computer to install a PXE server as a DHCP " +"server\n" +"and a TFTP server to build an installation server.\n" +"With that feature, other computers on your local network will be installable " +"using this computer as source.\n" +"\n" +"Make sure you have configured your Network/Internet access using drakconnect " +"before going any further.\n" +"\n" +"Note: you need a dedicated Network Adapter to set up a Local Area Network " +"(LAN)." +msgstr "DHCP on lokal Rangkaian Internet Rangkaian Rangkaian." + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "" +"OSS (Open Sound System) was the first sound API. It's an OS independent " +"sound API (it's available on most UNIX(tm) systems) but it's a very basic " +"and limited API.\n" +"What's more, OSS drivers all reinvent the wheel.\n" +"\n" +"ALSA (Advanced Linux Sound Architecture) is a modularized architecture " +"which\n" +"supports quite a large range of ISA, USB and PCI cards.\n" +"\n" +"It also provides a much higher API than OSS.\n" +"\n" +"To use alsa, one can either use:\n" +"- the old compatibility OSS api\n" +"- the new ALSA api that provides many enhanced features but requires using " +"the ALSA library.\n" +msgstr "Buka Bunyi Sistem on asas dan Lanjutan Bunyi USB dan" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"No free space for 1MB bootstrap! Install will continue, but to boot your " +"system, you'll need to create the bootstrap partition in DiskDrake" +msgstr "Tidak Install dalam" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Please choose the printer you want to set up or enter a device name/file " +"name in the input line" +msgstr "fail dalam" + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Refuse" +msgstr "" + +#: ../../standalone/draksec:1 +#, c-format +msgid "LOCAL" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "HFS" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"HardDrake runs a hardware probe, and optionally configures\n" +"new/changed hardware." +msgstr "dan." + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "Creating and formatting file %s" +msgstr "Mencipta dan fail" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, check additions/removals of sgid files." +msgstr "ya fail." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The HP LaserJet 1000 needs its firmware to be uploaded after being turned " +"on. Download the Windows driver package from the HP web site (the firmware " +"on the printer's CD does not work) and extract the firmware file from it by " +"uncompresing the self-extracting '.exe' file with the 'unzip' utility and " +"searching for the 'sihp1000.img' file. Copy this file into the '/etc/" +"printer' directory. There it will be found by the automatic uploader script " +"and uploaded whenever the printer is connected and turned on.\n" +msgstr "on Tetingkap on dan fail fail dan fail Salin fail direktori dan dan on" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Choose an existing LVM to add to" +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "xfs restart" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"The printer \"%s\" already exists,\n" +"do you really want to overwrite its configuration?" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "No partition available" +msgstr "Tidak" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Use the scanners on hosts: " +msgstr "on hos " + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Unselected All" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Printer Management \n" +msgstr "Baru" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Domain Name Resolver" +msgstr "Domain Nama" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Encryption key (again)" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Samba share name missing!" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "True Type install done" +msgstr "Jenis" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Detection in progress" +msgstr "dalam" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Build Whole Kernel -->" +msgstr "" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "modem" +msgstr "" + +#: ../../install_steps.pm:1 +#, fuzzy, c-format +msgid "Welcome to %s" +msgstr "Selamat datang ke %s" + +#: ../../standalone/drakhelp:1 +#, c-format +msgid "" +" drakhelp 0.1\n" +"Copyright (C) 2003 MandrakeSoft.\n" +"This is free software and may be redistributed under the terms of the GNU " +"GPL.\n" +"\n" +"Usage: \n" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Please insert the Update Modules floppy in drive %s" +msgstr "Kemaskini saja dalam" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Bootsplash" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"The following printer\n" +"\n" +"%s%s\n" +"is directly connected to your system" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer sharing on hosts/networks: " +msgstr "on hos " + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"\n" +"The \"%s\" command also allows to modify the option settings for a " +"particular printing job. Simply add the desired settings to the command " +"line, e. g. \"%s <file>\". " +msgstr "" + +#: ../../modules/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"In some cases, the %s driver needs to have extra information to work\n" +"properly, although it normally works fine without them. Would you like to " +"specify\n" +"extra options for it or allow the driver to probe your machine for the\n" +"information it needs? Occasionally, probing will hang a computer, but it " +"should\n" +"not cause any damage." +msgstr "Masuk." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Not the correct CD label. Disk is labelled %s." +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"Welcome to the Internet Connection Sharing utility!\n" +"\n" +"%s\n" +"\n" +"Click on Configure to launch the setup wizard." +msgstr "Selamat Datang Internet on." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Cuba" +msgstr "Cuba" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "October" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Belize" +msgstr "Belize" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Searching for new printers..." +msgstr "Mencari." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid " (multi-session)" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Kernel Boot Timeout" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, fuzzy, c-format +msgid "" +"Your card can have 3D hardware acceleration support but only with XFree %s.\n" +"Your card is supported by XFree %s which may have a better support in 2D." +msgstr "dalam." + +#: ../../security/help.pm:1 +#, c-format +msgid " Activate/Disable daily security check." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\t-CD-R.\n" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Enable libsafe if libsafe is found on the system" +msgstr "on" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "The DrakX Partitioning wizard found the following solutions:" +msgstr "Pempartisyenan:" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Hungarian" +msgstr "" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "" +"Select your provider.\n" +"If it isn't listed, choose Unlisted." +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Automatic time synchronization (using NTP)" +msgstr "" + +#: ../../network/adsl.pm:1 +#, fuzzy, c-format +msgid "Use my Windows partition" +msgstr "Tetingkap" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "8 MB" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "LDAP Server" +msgstr "LDAP" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"PCMCIA support is usually to support things like ethernet and\n" +"modems in laptops. It won't get started unless configured so it is safe to " +"have\n" +"it installed on machines that don't need it." +msgstr "dan dalam on." + +#: ../../network/tools.pm:1 +#, c-format +msgid "Choose your country" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +"- System Files:\n" +msgstr "Sistem" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Per client system configuration files:\n" +" \t\tThrough clusternfs, each diskless client can have its own unique " +"configuration files\n" +" \t\ton the root filesystem of the server. By allowing local client " +"hardware configuration, \n" +"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/" +"sysconfig/mouse, \n" +" \t\t/etc/sysconfig/keyboard on a per-client basis.\n" +"\n" +" Note: Enabling local client hardware configuration does enable root " +"login to the terminal \n" +" server on each client machine that has this feature enabled. Local " +"configuration can be turned\n" +" back off, retaining the configuration files, once the client machine " +"is configured." +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Standalone Tools" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Where" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "but not matching" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, c-format +msgid "" +"Here you can select an alternative driver (either OSS or ALSA) for your " +"sound card (%s)." +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Configuring PCMCIA cards..." +msgstr "" + +#: ../../common.pm:1 +#, c-format +msgid "kdesu missing" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "%s: %s requires a username...\n" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Encryption key" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "Microsoft IntelliMouse" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "" +"This setting will be activated after the installation.\n" +"During installation, you will need to use the Right Control\n" +"key to switch between the different keyboard layouts." +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Christmas Island" +msgstr "Kepulauan Krismas" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Installation of bootloader failed. The following error occured:" +msgstr "ralat:" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "EIDE/SCSI channel" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Set this printer as the default" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Verify that %s is the correct path" +msgstr "" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "partition %s" +msgstr "" + +#: ../../security/level.pm:1 +#, c-format +msgid "Paranoid" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "NIS" +msgstr "NIS" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "<-- Del User" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Location on the bus" +msgstr "Lokasi on" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "No printer found!" +msgstr "Tidak!" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "the vendor name of the device" +msgstr "" + +#: ../../help.pm:1 ../../install_interactive.pm:1 +#, c-format +msgid "Erase entire disk" +msgstr "" + +#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid " (Default)" +msgstr "Default" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Automatic reconfiguration" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Receiving Speed:" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Turks and Caicos Islands" +msgstr "Kepulauan Caicos dan Turks" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "No Ip" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 +#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 +#, c-format +msgid "<- Previous" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Transfer Now" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Set root password and network authentication methods" +msgstr "dan" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Internet Connection Sharing configuration" +msgstr "Internet" + +#: ../../ugtk2.pm:1 +#, fuzzy, c-format +msgid "Toggle between flat and group sorted" +msgstr "dan" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Themes" +msgstr "Tema" + +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Options: %s" +msgstr "Pilihan" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "" +"You are currently using %s as your boot manager.\n" +"Click on Configure to launch the setup wizard." +msgstr "on." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "OKI winprinter configuration" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Saint Helena" +msgstr "Santa Helena" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Parallel port #%s" +msgstr "on" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Security Level" +msgstr "Keselamatan" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "" +"Some steps are not completed.\n" +"\n" +"Do you really want to quit now?" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Sudan" +msgstr "Sudan" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Polish (qwertz layout)" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Syria" +msgstr "Syria" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, " +"LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), " +"an HP PhotoSmart or an HP LaserJet 2200?" +msgstr "" + +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#: ../../bootloader.pm:1 +#, fuzzy, c-format +msgid "" +"Welcome to %s the operating system chooser!\n" +"\n" +"Choose an operating system from the list above or\n" +"wait %d seconds for default boot.\n" +"\n" +msgstr "Selamat Datang saat default" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Portuguese" +msgstr "Portugis" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Loopback file name: " +msgstr "fail " + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "DNS server address should be in format 1.2.3.4" +msgstr "dalam" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Left Control key" +msgstr "Kiri" + +#: ../../lang.pm:1 +#, c-format +msgid "Serbia" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "Newzealand" +msgstr "" + +#: ../../fsedit.pm:1 +#, fuzzy, c-format +msgid "This directory should remain within the root filesystem" +msgstr "direktori" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Across Network" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "CapsLock key" +msgstr "" + +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Install bootloader" +msgstr "Install" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Select the memory size of your graphics card" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"Enable/Disable crontab and at for users.\n" +"\n" +"Put allowed users in /etc/cron.allow and /etc/at.allow (see man at(1)\n" +"and crontab(1))." +msgstr "dan dalam dan." + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "" +"[OPTIONS]\n" +"Network & Internet connection and monitoring application\n" +"\n" +"--defaultintf interface : show this interface by default\n" +"--connect : connect to internet if not already connected\n" +"--disconnect : disconnect to internet if already connected\n" +"--force : used with (dis)connect : force (dis)connection.\n" +"--status : returns 1 if connected 0 otherwise, then exit.\n" +"--quiet : don't be interactive. To be used with (dis)connect." +msgstr "Internet dan default Kepada." + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Dynamic IP Address Pool:" +msgstr "IP Alamat:" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "LVM name?" +msgstr "" + +#: ../../standalone/service_harddrake:1 +#, fuzzy, c-format +msgid "Some devices in the \"%s\" hardware class were removed:\n" +msgstr "dalam" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "Found %s %s interfaces" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Post Install" +msgstr "Pasca Pasang" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "The internal domain name" +msgstr "" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Card IRQ" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "logdrake" +msgstr "" + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "" +"Font Importation and monitoring " +"application \n" +"--windows_import : import from all available windows partitions.\n" +"--xls_fonts : show all fonts that already exist from xls\n" +"--strong : strong verification of font.\n" +"--install : accept any font file and any directry.\n" +"--uninstall : uninstall any font or any directory of font.\n" +"--replace : replace all font if already exist\n" +"--application : 0 none application.\n" +" : 1 all application available supported.\n" +" : name_of_application like so for staroffice \n" +" : and gs for ghostscript for only this one." +msgstr "" +"Font dan terima fail dan direktori tiada\n" +"\n" +"\n" +" dan." + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]" +msgstr "lpd" + +#: ../../any.pm:1 +#, c-format +msgid "Choose the floppy drive you want to use to make the bootdisk" +msgstr "" + +#: ../../bootloader.pm:1 ../../help.pm:1 +#, c-format +msgid "LILO with text menu" +msgstr "" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Everything (no firewall)" +msgstr "Semuanya tidak" + +#: ../../any.pm:1 +#, c-format +msgid "You must specify a kernel image" +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid ", multi-function device on USB" +msgstr "on" + +#: ../../interactive/newt.pm:1 +#, c-format +msgid "Do" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Contacting the mirror to get the list of available packages..." +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Lithuanian AZERTY (old)" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Brazilian (ABNT-2)" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "IP address of host/network:" +msgstr "IP:" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "" +"the progress bar y coordinate\n" +"of its upper left corner" +msgstr "" + +#: ../../install_gtk.pm:1 +#, fuzzy, c-format +msgid "System installation" +msgstr "Sistem" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Saint Vincent and the Grenadines" +msgstr "dan" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Allow/Forbid reboot by the console user." +msgstr "pengguna." + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "/File/_Open" +msgstr "Fail" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "Location of auto_install.cfg file" +msgstr "Lokasi" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Open Firmware Delay" +msgstr "Buka" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Hungary" +msgstr "Hungary" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "New Zealand" +msgstr "New Zealand" + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Color configuration" +msgstr "" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "" +"There are already some restrictions, and more automatic checks are run every " +"night." +msgstr "dan." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "please choose the date to restore" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Netherlands Antilles" +msgstr "Netherlands Antilles" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Switching from ext2 to ext3" +msgstr "" + +#: ../../printer/data.pm:1 +#, c-format +msgid "LPRng" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Browse to new restore repository." +msgstr "Lungsur." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard allows you to install local or remote printers to be used from " +"this machine and also from other machines in the network.\n" +"\n" +"It asks you for all necessary information to set up the printer and gives " +"you access to all available printer drivers, driver options, and printer " +"connection types." +msgstr "lokal dan dalam dan dan." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "and %d unknown printers" +msgstr "dan tidak diketahui" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"Early Intel Pentium chips manufactured have a bug in their floating point " +"processor which did not achieve the required precision when performing a " +"Floating point DIVision (FDIV)" +msgstr "dalam" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"Backup quota exceeded!\n" +"%d MB used vs %d MB allocated." +msgstr "" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "No ISDN PCI card found. Please select one on the next screen." +msgstr "Tidak on." + +#: ../../common.pm:1 +#, c-format +msgid "GB" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Please give a user name" +msgstr "pengguna" + +#: ../../any.pm:1 +#, c-format +msgid "Enable CD Boot?" +msgstr "" + +#: ../../interactive/stdio.pm:1 +#, c-format +msgid " enter `void' for void entry" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Backups on unmountable media - Use Catalog to restore" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "January" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Password history length" +msgstr "Katalaluan" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "Winmodem connection" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Congratulations, your printer is now installed and configured!\n" +"\n" +"You can print using the \"Print\" command of your application (usually in " +"the \"File\" menu).\n" +"\n" +"If you want to add, remove, or rename a printer, or if you want to change " +"the default option settings (paper input tray, printout quality, ...), " +"select \"Printer\" in the \"Hardware\" section of the Mandrake Control " +"Center." +msgstr "dan dalam Fail default dalam Perkakasan." + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "Now, you can run xawtv (under X Window!) !\n" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Not enough swap space to fulfill installation, please add some" +msgstr "" + +#. -PO: example: lilo-graphic on /dev/hda1 +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "%s on %s" +msgstr "%s pada %s" + +#: ../../security/help.pm:1 +#, c-format +msgid "Allow/Forbid remote root login." +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n" +"local time according to the time zone you selected. If the clock on your\n" +"motherboard is set to local time, you may deactivate this by unselecting\n" +"\"%s\", which will let GNU/Linux know that the system clock and the\n" +"hardware clock are in the same timezone. This is useful when the machine\n" +"also hosts another operating system like Windows.\n" +"\n" +"The \"%s\" option will automatically regulate the clock by connecting to a\n" +"remote time server on the Internet. For this feature to work, you must have\n" +"a working Internet connection. It is best to choose a time server located\n" +"near you. This option actually installs a time server that can used by\n" +"other machines on your local network as well." +msgstr "" +"dalam Masa dan on lokal dan dalam hos Tetingkap on Internet Internet on " +"lokal." + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Which is your timezone?" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Can't create log file!" +msgstr "fail!" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use .backupignore files" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Guinea" +msgstr "Guinea" + +#: ../../network/tools.pm:1 +#, fuzzy, c-format +msgid "The system is now connected to the Internet." +msgstr "Internet." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "South Georgia and the South Sandwich Islands" +msgstr "Selatan Georgia dan Selatan" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "Japan (broadcast)" +msgstr "Jepun" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Monitor\n" +"\n" +" The installer will normally automatically detect and configure the\n" +"monitor connected to your machine. If it is incorrect, you can choose from\n" +"this list the monitor you actually have connected to your computer." +msgstr "" +"Monitor\n" +" dan." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Mozambique" +msgstr "Mozambique" + +#: ../../any.pm:1 +#, c-format +msgid "Icon" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Please choose what you want to backup" +msgstr "" + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "256 colors (8 bits)" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Read-write" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Size: %s\n" +msgstr "Saiz" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Hostname: " +msgstr "Namahos " + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Add a rule" +msgstr "Tambah" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Chunk size %s\n" +msgstr "" + +#: ../../share/advertising/02-community.pl:1 +#, c-format +msgid "Build the future of Linux!" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Local Printer" +msgstr "" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "Floppy access error, unable to mount device %s" +msgstr "" + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]" +msgstr "fail" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "ADSL connection" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "No configuration, please click Wizard or Advanced.\n" +msgstr "Tidak Lanjutan" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Error!" +msgstr "Ralat!" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "cable connection detected" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Permission denied transferring %s to %s" +msgstr "" + +#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 +#, c-format +msgid "/_Report Bug" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Dominica" +msgstr "Dominica" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Resize" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Resolution: %s\n" +msgstr "Resolusi" + +#: ../../install2.pm:1 +#, fuzzy, c-format +msgid "" +"Can't access kernel modules corresponding to your kernel (file %s is " +"missing), this generally means your boot floppy in not in sync with the " +"Installation medium (please create a newer boot floppy)" +msgstr "fail dalam dalam" + +#: ../../help.pm:1 +#, c-format +msgid "" +"Please select the correct port. For example, the \"COM1\" port under\n" +"Windows is named \"ttyS0\" under GNU/Linux." +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "The following packages are going to be removed" +msgstr "" + +#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1 +#, fuzzy, c-format +msgid "Connect to the Internet" +msgstr "Sambung" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Use existing partitions" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Canadian (Quebec)" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Mouse device: %s\n" +msgstr "Tetikus" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Reselect correct fonts" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - /etc/xinetd.d/tftp:\n" +" \t\tdrakTermServ will configure this file to work in conjunction " +"with the images created by\n" +" \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up " +"the boot image to each\n" +" \t\tdiskless client.\n" +"\n" +" \t\tA typical tftp configuration file looks like:\n" +" \t\t\n" +" \t\tservice tftp\n" +"\t\t\t{\n" +" disable = no\n" +" socket_type = dgram\n" +" protocol = udp\n" +" wait = yes\n" +" user = root\n" +" server = /usr/sbin/in.tftpd\n" +" server_args = -s /var/lib/tftpboot\n" +" \t\t}\n" +" \t\t\n" +" \t\tThe changes here from the default installation are changing the " +"disable flag to\n" +" \t\t'no' and changing the directory path to /var/lib/tftpboot, where " +"mkinitrd-net\n" +" \t\tputs its images." +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Options\n" +"\n" +" Here you can choose whether you want to have your machine automatically\n" +"switch to a graphical interface at boot. Obviously, you want to check\n" +"\"%s\" if your machine is to act as a server, or if you were not successful\n" +"in getting the display configured." +msgstr "" +"Pilihan\n" +"." + +#: ../../share/advertising/13-mdkexpert_corporate.pl:1 +#, c-format +msgid "MandrakeExpert Corporate" +msgstr "" + +#: ../../standalone.pm:1 +#, c-format +msgid "" +" [everything]\n" +" XFdrake [--noauto] monitor\n" +" XFdrake resolution" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Write protection" +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "You've not selected any font" +msgstr "" + +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Language" +msgstr "Bahasa" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer model selection" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"After changing type of partition %s, all data on this partition will be lost" +msgstr "on" + +#: ../../common.pm:1 +#, c-format +msgid "%d seconds" +msgstr "" + +#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Insert a blank floppy in drive %s" +msgstr "dalam" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "A valid URI must be entered!" +msgstr "A!" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "Found \"%s\" interface do you want to use it ?" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Re-configure interface and DHCP server" +msgstr "dan DHCP" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "Sound configuration" +msgstr "Bunyi" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Photo test page" +msgstr "" + +#: ../../help.pm:1 ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Custom disk partitioning" +msgstr "Tersendiri" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Enter Printer Name and Comments" +msgstr "Enter Nama dan" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"The following printers\n" +"\n" +"%s%s\n" +"are directly connected to your system" +msgstr "" + +#: ../../network/modem.pm:1 +#, c-format +msgid "You don't have any winmodem" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "type: %s" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Slovakian (QWERTY)" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"This should be a comma-separated list of local users or email addresses that " +"you want the backup results sent to. You will need a functioning mail " +"transfer agent setup on your system." +msgstr "lokal on." + +#: ../../standalone/draksound:1 +#, fuzzy, c-format +msgid "No Sound Card detected!" +msgstr "Tidak Bunyi!" + +#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 +#, fuzzy, c-format +msgid "Mouse Port" +msgstr "Liang Tetikus" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Check for unsecured accounts" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "" +"Need to restart the Display Manager for full changes to take effect. \n" +"(service dm restart - at the console)" +msgstr "ulanghidup Paparan penuh ulanghidup" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Ftp Server" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Uganda" +msgstr "Uganda" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "%s fonts conversion" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "the type of bus on which the mouse is connected" +msgstr "on" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"As a review, DrakX will present a summary of information it has about your\n" +"system. Depending on your installed hardware, you may have some or all of\n" +"the following entries. Each entry is made up of the configuration item to\n" +"be configured, followed by a quick summary of the current configuration.\n" +"Click on the corresponding \"%s\" button to change that.\n" +"\n" +" * \"%s\": check the current keyboard map configuration and change that if\n" +"necessary.\n" +"\n" +" * \"%s\": check the current country selection. If you are not in this\n" +"country, click on the \"%s\" button and choose another one. If your country\n" +"is not in the first list shown, click the \"%s\" button to get the complete\n" +"country list.\n" +"\n" +" * \"%s\": By default, DrakX deduces your time zone based on the country\n" +"you have chosen. You can click on the \"%s\" button here if this is not\n" +"correct.\n" +"\n" +" * \"%s\": check the current mouse configuration and click on the button to\n" +"change it if necessary.\n" +"\n" +" * \"%s\": clicking on the \"%s\" button will open the printer\n" +"configuration wizard. Consult the corresponding chapter of the ``Starter\n" +"Guide'' for more information on how to setup a new printer. The interface\n" +"presented there is similar to the one used during installation.\n" +"\n" +" * \"%s\": if a sound card is detected on your system, it is displayed\n" +"here. If you notice the sound card displayed is not the one that is\n" +"actually present on your system, you can click on the button and choose\n" +"another driver.\n" +"\n" +" * \"%s\": by default, DrakX configures your graphical interface in\n" +"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n" +"\"%s\" to reconfigure your graphical interface.\n" +"\n" +" * \"%s\": if a TV card is detected on your system, it is displayed here.\n" +"If you have a TV card and it is not detected, click on \"%s\" to try to\n" +"configure it manually.\n" +"\n" +" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n" +"here. You can click on \"%s\" to change the parameters associated with the\n" +"card.\n" +"\n" +" * \"%s\": If you want to configure your Internet or local network access\n" +"now.\n" +"\n" +" * \"%s\": this entry allows you to redefine the security level as set in a\n" +"previous step ().\n" +"\n" +" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n" +"idea to protect yourself from intrusions by setting up a firewall. Consult\n" +"the corresponding section of the ``Starter Guide'' for details about\n" +"firewall settings.\n" +"\n" +" * \"%s\": if you wish to change your bootloader configuration, click that\n" +"button. This should be reserved to advanced users.\n" +"\n" +" * \"%s\": here you'll be able to fine control which services will be run\n" +"on your machine. If you plan to use this machine as a server it's a good\n" +"idea to review this setup." +msgstr "" +"on on\n" +" dan\n" +" dalam on dan dalam\n" +" default on on\n" +" dan on\n" +" on on\n" +" on on on dan\n" +" default dalam on\n" +" on dan on secara manual\n" +" on on\n" +" Internet lokal\n" +" dalam\n" +" Internet\n" +"\n" +"." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Comoros" +msgstr "Comoros" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "May" +msgstr "" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Yaboot mode" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "USA (cable)" +msgstr "" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "" +"Can't relaunch LiLo!\n" +"Launch \"lilo\" as root in command line to complete LiLo theme installation." +msgstr "dalam." + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "Generic 3 Button Mouse" +msgstr "Generik" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Select another media to restore from" +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Software Manager" +msgstr "" + +#: ../../interactive/stdio.pm:1 +#, c-format +msgid "Re-submit" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "CD in place - continue." +msgstr "dalam." + +#: ../../common.pm:1 +#, c-format +msgid "KB" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Network & Internet" +msgstr "Rangkaian" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Lithuanian \"phonetic\" QWERTY" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Net Boot Images" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Sharing of local scanners" +msgstr "lokal" + +#: ../../Xconfig/monitor.pm:1 +#, c-format +msgid "Plug'n Play probing failed. Please select the correct monitor" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "Services and deamons" +msgstr "Perkhidmatan dan" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Remote host name missing!" +msgstr "" + +#: ../../fsedit.pm:1 +#, c-format +msgid "with /usr" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Network" +msgstr "Rangkaian" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Auto-detect printers connected to machines running Microsoft Windows" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "This password is too simple" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Chkconfig obey msec rules" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Slovakian (QWERTZ)" +msgstr "" + +#: ../../share/advertising/06-development.pl:1 +#, fuzzy, c-format +msgid "" +"To modify and to create in different languages such as Perl, Python, C and C+" +"+ has never been so easy thanks to GNU gcc 3 and the best Open Source " +"development environments." +msgstr "Kepada dan dalam Python C dan C dan Buka." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "No devices found" +msgstr "Tidak" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Truly minimal install (especially no urpmi)" +msgstr "tidak" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use daemon" +msgstr "" + +#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1 +#: ../../standalone/drakauth:1 ../../standalone/drakconnect:1 +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Authentication" +msgstr "Pengesahan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Add this printer to Star Office/OpenOffice.org/GIMP" +msgstr "Tambah Pejabat" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Additional CUPS servers: " +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Choose one of the auto-detected printers from the list or enter the hostname " +"or IP and the optional port number (default is 9100) in the input fields." +msgstr "IP dan default dalam." + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Where do you want to mount %s?" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Algeria" +msgstr "Algeria" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore Via Network" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Initrd-size" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"In the case that different servers are available for your card, with or\n" +"without 3D acceleration, you are then asked to choose the server that best\n" +"suits your needs." +msgstr "Masuk." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "\tBackups use tar and gzip\n" +msgstr "dan" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Set as default" +msgstr "default" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "2 MB" +msgstr "" + +#: ../../printer/main.pm:1 ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Configured on this machine" +msgstr "on" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Both Control keys simultaneously" +msgstr "" + +#: ../../standalone/drakhelp:1 +#, c-format +msgid " --help - display this help \n" +msgstr "" + +#: ../../standalone.pm:1 +#, fuzzy, c-format +msgid "" +"[OPTION]...\n" +" --no-confirmation don't ask first confirmation question in " +"MandrakeUpdate mode\n" +" --no-verify-rpm don't verify packages signatures\n" +" --changelog-first display changelog before filelist in the " +"description window\n" +" --merge-all-rpmnew propose to merge all .rpmnew/.rpmsave files found" +msgstr "" +"\n" +" tidak dalam\n" +" tidak\n" +" dalam\n" +" fail" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Setting Default Printer..." +msgstr "Default." + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Interface %s (using module %s)" +msgstr "Antaramuka" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "Generating preview ..." +msgstr "" + +#: ../../network/network.pm:1 +#, c-format +msgid "" +"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz " +"frequency), or add enough '0' (zeroes)." +msgstr "" + +#: ../../standalone/draksec:1 +#, c-format +msgid "ignore" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"Allow/Forbid X connections:\n" +"\n" +"- ALL (all connections are allowed),\n" +"\n" +"- LOCAL (only connection from local machine),\n" +"\n" +"- NONE (no connection)." +msgstr "lokal tidak." + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid ", multi-function device on parallel port #%s" +msgstr "on" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "serial" +msgstr "bersiri" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "DVD-ROM" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Georgian (\"Latin\" layout)" +msgstr "" + +#: ../../share/advertising/09-mdksecure.pl:1 +#, c-format +msgid "Get the best items with Mandrake Linux Strategic partners" +msgstr "" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "" +"You may now provide options to module %s.\n" +"Note that any address should be entered with the prefix 0x like '0x123'" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Kenya" +msgstr "Kenya" + +#: ../../diskdrake/hd_gtk.pm:1 +#, c-format +msgid "Use ``Unmount'' first" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Installing mtools packages..." +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "You must specify a root partition" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "first step creation" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Both Shift keys simultaneously" +msgstr "Shif" + +#: ../../standalone/drakhelp:1 +#, c-format +msgid "" +" --id <id_label> - load the html help page which refers to id_label\n" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Create etherboot floppies/CDs:\n" +" \t\tThe diskless client machines need either ROM images on the NIC, " +"or a boot floppy\n" +" \t\tor CD to initate the boot sequence. drakTermServ will help " +"generate these images,\n" +" \t\tbased on the NIC in the client machine.\n" +" \t\t\n" +" \t\tA basic example of creating a boot floppy for a 3Com 3c509 " +"manually:\n" +" \t\t\n" +" \t\tcat /usr/lib/etherboot/boot1a.bin \\\n" +" \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Select a scanner model" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Accept/Refuse bogus IPv4 error messages." +msgstr "Terima ralat." + +#: ../../printer/data.pm:1 +#, fuzzy, c-format +msgid "LPRng - LPR New Generation" +msgstr "Baru" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Drakbackup Configuration" +msgstr "" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Save as.." +msgstr "Simpan." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Korea (North)" +msgstr "Utara" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "" +"This interface has not been configured yet.\n" +"Launch the configuration wizard in the main window" +msgstr "dalam utama" + +#: ../../install_gtk.pm:1 +#, fuzzy, c-format +msgid "System configuration" +msgstr "Sistem" + +#: ../../any.pm:1 ../../security/l10n.pm:1 +#, c-format +msgid "Autologin" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Domain Admin Password" +msgstr "Domain" + +#: ../../share/advertising/05-desktop.pl:1 +#, fuzzy, c-format +msgid "" +"Perfectly adapt your computer to your needs thanks to the 11 available " +"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME " +"2.2, Window Maker, ..." +msgstr "pengguna KDE GNOME." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Configuring printer ..." +msgstr "" + +#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"To ensure data integrity after resizing the partition(s), \n" +"filesystem checks will be run on your next boot into Windows(TM)" +msgstr "Kepada on Tetingkap" + +#: ../../common.pm:1 +#, c-format +msgid "MB" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, run some checks against the rpm database." +msgstr "ya." + +#: ../../lang.pm:1 +#, c-format +msgid "Virgin Islands (British)" +msgstr "Kepulauan Virgin (Inggeris)" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bermuda" +msgstr "Bermuda" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "click here if you are sure." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"No configuration file found \n" +"please click Wizard or Advanced." +msgstr "Tidak fail Lanjutan." + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Listed here are the existing Linux partitions detected on your hard drive.\n" +"You can keep the choices made by the wizard, since they are good for most\n" +"common installations. If you make any changes, you must at least define a\n" +"root partition (\"/\"). Do not choose too small a partition or you will not\n" +"be able to install enough software. If you want to store your data on a\n" +"separate partition, you will also need to create a \"/home\" partition\n" +"(only possible if you have more than one Linux partition available).\n" +"\n" +"Each partition is listed as follows: \"Name\", \"Capacity\".\n" +"\n" +"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" +"\"partition number\" (for example, \"hda1\").\n" +"\n" +"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" +"\"sd\" if it is a SCSI hard drive.\n" +"\n" +"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"hard drives:\n" +"\n" +" * \"a\" means \"master hard drive on the primary IDE controller\";\n" +"\n" +" * \"b\" means \"slave hard drive on the primary IDE controller\";\n" +"\n" +" * \"c\" means \"master hard drive on the secondary IDE controller\";\n" +"\n" +" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" +"\n" +"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" +"\"second lowest SCSI ID\", etc." +msgstr "" +"on on Nama Nama dan\n" +" on\n" +" on\n" +" on\n" +" on." + +#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 +#, fuzzy, c-format +msgid "Remove" +msgstr "Buang" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Lesotho" +msgstr "Lesotho" + +#: ../../ugtk2.pm:1 +#, c-format +msgid "utopia 25" +msgstr "" + +#: ../../printer/main.pm:1 +#, c-format +msgid "Pipe job into a command" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Cote d'Ivoire" +msgstr "Pantai Gading" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "new dynamic device name generated by core kernel devfs" +msgstr "" + +#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 +#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Yes" +msgstr "Ya" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "Which protocol do you want to use?" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore Progress" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Estonia" +msgstr "Estonia" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Choose the host on which the local scanners should be made available:" +msgstr "on lokal:" + +#: ../../partition_table.pm:1 +#, fuzzy, c-format +msgid "" +"You have a hole in your partition table but I can't use it.\n" +"The only solution is to move your primary partitions to have the hole next " +"to the extended partitions." +msgstr "dalam." + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Channel" +msgstr "Saluran" + +#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Add" +msgstr "Tambah" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "No Internet Connection Sharing has ever been configured." +msgstr "Tidak Internet." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " Error while sending mail. \n" +msgstr "Ralat" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#: ../../standalone/keyboarddrake:1 +#, fuzzy, c-format +msgid "Keyboard" +msgstr "Papan Kekunci" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Insert the CD with volume label %s\n" +" in the CD drive under mount point /mnt/cdrom" +msgstr "" +"\n" +" dalam" + +#: ../../network/network.pm:1 +#, c-format +msgid "" +"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add " +"enough '0' (zeroes)." +msgstr "" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "Choose the connection you want to configure" +msgstr "" + +#: ../../standalone/draksec:1 +#, c-format +msgid "Please wait, setting security level..." +msgstr "" + +#: ../../network/network.pm:1 +#, c-format +msgid "Configuring network device %s" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "activated" +msgstr "" + +#: ../../standalone/drakpxe:1 +#, c-format +msgid "Please choose which network interface will be used for the dhcp server." +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Finding packages to upgrade..." +msgstr "Cari pakej untuk ditingkatupaya..." + +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Mount point: " +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "parse all fonts" +msgstr "" + +#: ../../security/help.pm:1 +#, c-format +msgid "Allow/Forbid direct root login." +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid " Accept/Refuse broadcasted icmp echo." +msgstr "Terima." + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "With X" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Multi-head configuration" +msgstr "" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "No browser available! Please install one" +msgstr "Tidak" + +#: ../../Xconfig/main.pm:1 +#, c-format +msgid "" +"Keep the changes?\n" +"The current configuration is:\n" +"\n" +"%s" +msgstr "" + +#: ../../fsedit.pm:1 +#, c-format +msgid "You can't use ReiserFS for partitions smaller than 32MB" +msgstr "" + +#: ../../services.pm:1 +#, c-format +msgid "" +"The rwho protocol lets remote users get a list of all of the users\n" +"logged into a machine running the rwho daemon (similiar to finger)." +msgstr "" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Domain name" +msgstr "Domain" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Sharing of local printers" +msgstr "lokal" + +#: ../../install_messages.pm:1 +#, c-format +msgid "http://www.mandrakelinux.com/en/92errata.php3" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Enable/Disable libsafe if libsafe is found on the system." +msgstr "on." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Available printers" +msgstr "" + +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Empty" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "text width" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Where do you want to mount device %s?" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The default lease (in seconds)" +msgstr "default dalam saat" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "" +"We are now going to configure the %s connection.\n" +"\n" +"\n" +"Press \"%s\" to continue." +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Create Etherboot Enabled Boot Images:\n" +" \t\tTo boot a kernel via etherboot, a special kernel/initrd image " +"must be created.\n" +" \t\tmkinitrd-net does much of this work and drakTermServ is just a " +"graphical interface\n" +" \t\tto help manage/customize these images. To create the file \n" +" \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an " +"include in \n" +" \t\tdhcpd.conf, you should create the etherboot images for at least " +"one full kernel." +msgstr "" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Interface \"%s\"" +msgstr "Antaramuka" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "With basic documentation (recommended!)" +msgstr "asas" + +#: ../../mouse.pm:1 +#, c-format +msgid "1 button" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"There are %d unknown printers directly connected to your system" +msgstr "tidak diketahui" + +#: ../../Xconfig/main.pm:1 +#, fuzzy, c-format +msgid "Test" +msgstr "Ujian" + +#: ../../lang.pm:1 +#, c-format +msgid "Korea" +msgstr "" + +#: ../../interactive/stdio.pm:1 +#, fuzzy, c-format +msgid "Your choice? (default `%s'%s) " +msgstr "default " + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Raw printer" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "official vendor name of the cpu" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Useless without Terminal Server" +msgstr "" + +#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1 +#, c-format +msgid "Vendor" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Interface %s" +msgstr "Antaramuka" + +#: ../../steps.pm:1 +#, c-format +msgid "Configure mouse" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Choose the mount points" +msgstr "" + +#: ../../help.pm:1 ../../standalone/drakTermServ:1 ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "OK" +msgstr "OK" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Yugoslavian (latin)" +msgstr "" + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Installing" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "Logitech MouseMan with Wheel emulation" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "Launch userdrake" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Is this an install or an upgrade?" +msgstr "" + +#: ../../help.pm:1 +#, c-format +msgid "ISDN card" +msgstr "" + +#: ../../share/advertising/02-community.pl:1 +#, fuzzy, c-format +msgid "" +"To share your own knowledge and help build Linux software, join our " +"discussion forums on our \"Community\" webpages." +msgstr "Kepada dan on." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\t-Hard drive.\n" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"This step is activated only if an old GNU/Linux partition has been found on\n" +"your machine.\n" +"\n" +"DrakX now needs to know if you want to perform a new install or an upgrade\n" +"of an existing Mandrake Linux system:\n" +"\n" +" * \"%s\": For the most part, this completely wipes out the old system. If\n" +"you wish to change how your hard drives are partitioned, or change the file\n" +"system, you should use this option. However, depending on your partitioning\n" +"scheme, you can prevent some of your existing data from being over-written.\n" +"\n" +" * \"%s\": this installation class allows you to update the packages\n" +"currently installed on your Mandrake Linux system. Your current\n" +"partitioning scheme and user data is not altered. Most of other\n" +"configuration steps remain available, similar to a standard installation.\n" +"\n" +"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n" +"running version \"8.1\" or later. Performing an Upgrade on versions prior\n" +"to Mandrake Linux version \"8.1\" is not recommended." +msgstr "" +"on\n" +" keluar fail on\n" +" on dan pengguna Tingkatupaya on Tingkatupaya on." + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Printer on remote CUPS server" +msgstr "on" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP." +msgstr "Gagal Pejabat." + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "here if no." +msgstr "tidak." + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "DHCP host name" +msgstr "DHCP" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The maximum lease (in seconds)" +msgstr "dalam saat" + +#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1 +#, fuzzy, c-format +msgid "Please choose which serial port your mouse is connected to." +msgstr "bersiri." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Did it work properly?" +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "Mount the file system read-only." +msgstr "fail." + +#: ../../security/level.pm:1 +#, c-format +msgid "Poor" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Report check result by mail" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Grenada" +msgstr "Grenada" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The DHCP start range" +msgstr "DHCP mula" + +#: ../../any.pm:1 +#, c-format +msgid "Unsafe" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid ", %s sectors" +msgstr "" + +#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1 +#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "No" +msgstr "Tidak" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Guadeloupe" +msgstr "Guadeloupe" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Kannada" +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "could not find any font.\n" +msgstr "" + +#: ../../standalone/keyboarddrake:1 +#, fuzzy, c-format +msgid "Do you want the BackSpace to return Delete in console?" +msgstr "Padam dalam?" + +#: ../../Xconfig/monitor.pm:1 +#, c-format +msgid "Vertical refresh rate" +msgstr "" + +#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1 +#, c-format +msgid "Entering step `%s'\n" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Niger" +msgstr "Niger" + +#: ../../mouse.pm:1 +#, c-format +msgid "Logitech MouseMan" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Removing %s ..." +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "No printer" +msgstr "Tidak" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "alert configuration" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "NetWare Printer Options" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "%s BootSplash (%s) preview" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "February" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "General" +msgstr "Umum" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "/etc/issue* exist" +msgstr "" + +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Add a user" +msgstr "Tambah" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Network configuration (%d adapters)" +msgstr "Rangkaian" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "April" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Deactivate now" +msgstr "" + +#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1 +#, c-format +msgid "Mandatory package %s is missing" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Philippines" +msgstr "Filipina" + +#: ../../interactive.pm:1 ../../ugtk2.pm:1 +#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 +#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1 +#: ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 +#: ../../standalone/draksec:1 ../../standalone/mousedrake:1 +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Ok" +msgstr "Ok" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "drakTermServ Overview" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Print Queue Name" +msgstr "Giliran" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Do you want to use aboot?" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Belarusian" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"PDQ only supports local printers, remote LPD printers, and Socket/TCP " +"printers.\n" +msgstr "lokal dan" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Move files to the new partition" +msgstr "fail" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Add here the CUPS servers whose printers you want to use. You only need to " +"do this if the servers do not broadcast their printer information into the " +"local network." +msgstr "Tambah lokal." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard will help you to install your printer(s) connected to this " +"computer.\n" +"\n" +"Please plug in and turn on all printers connected to this machine so that it/" +"they can be auto-detected.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " +"to set up your printer(s) now." +msgstr "" +"dalam dan on\n" +" on Berikutnya dan on Batal." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Pitcairn" +msgstr "Pitcairn" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Restore From Catalog" +msgstr "Daripada" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "IDE" +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "mounting partition %s in directory %s failed" +msgstr "dalam direktori" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Lilo screen" +msgstr "" + +#: ../../bootloader.pm:1 ../../help.pm:1 +#, c-format +msgid "LILO with graphical menu" +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Estimating" +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "You can't unselect this package. It is already installed" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid ", printer \"%s\" on SMB/Windows server \"%s\"" +msgstr "on SMB Tetingkap" + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Go on anyway?" +msgstr "Pergi ke on?" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Looking for available packages and rebuilding rpm database..." +msgstr "dan." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"\n" +" DrakBackup Report \n" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Does not appear to be recordable media!" +msgstr "" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "Specify options" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Vanuatu" +msgstr "Vanuatu" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "New user list:\n" +msgstr "Baru pengguna" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Either the server name or the server's IP must be given!" +msgstr "IP!" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"A custom bootdisk provides a way of booting into your Linux system without\n" +"depending on the normal bootloader. This is useful if you don't want to " +"install\n" +"SILO on your system, or another operating system removes SILO, or SILO " +"doesn't\n" +"work with your hardware configuration. A custom bootdisk can also be used " +"with\n" +"the Mandrake rescue image, making it much easier to recover from severe " +"system\n" +"failures.\n" +"\n" +"If you want to create a bootdisk for your system, insert a floppy in the " +"first\n" +"drive and press \"Ok\"." +msgstr "A on normal on A dalam dan Ok." + +#: ../../fsedit.pm:1 +#, fuzzy, c-format +msgid "You can't use an encrypted file system for mount point %s" +msgstr "fail" + +#: ../../security/help.pm:1 +#, c-format +msgid "Set the password history length to prevent password reuse." +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Norfolk Island" +msgstr "Kepulauan Norfolk" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Theme installation failed!" +msgstr "Tema!" + +#: ../../fsedit.pm:1 +#, c-format +msgid "Nothing to do" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Use for loopback" +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Mandrake Bug Report Tool" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "Apply filter" +msgstr "" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "use pppoe" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Moving files to the new partition" +msgstr "fail" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" +msgstr "" + +#: ../../help.pm:1 ../../interactive.pm:1 +#, fuzzy, c-format +msgid "Advanced" +msgstr "Lanjutan" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Transfer" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Dvorak (Swedish)" +msgstr "Swedish" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Afghanistan" +msgstr "Afghanistan" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "More Options" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Delete Hard Drive tar files after backup to other media." +msgstr "Padam Pemacu fail." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Burundi" +msgstr "Burundi" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"cron is a standard UNIX program that runs user-specified programs\n" +"at periodic scheduled times. vixie cron adds a number of features to the " +"basic\n" +"UNIX cron, including better security and more powerful configuration options." +msgstr "pengguna asas dan." + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Add Client -->" +msgstr "Tambah" + +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Read carefully!" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "RW" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "" +"Please,\n" +"type in your tv norm and country" +msgstr "dalam dan" + +#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Port" +msgstr "Liang" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "No (experts only)" +msgstr "Tidak" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "No kernel selected!" +msgstr "Tidak!" + +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 +#, c-format +msgid "Press enter to boot the selected OS, 'e' to edit the" +msgstr "" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Set-GID" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "The encryption keys do not match" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "" +"For a multisession CD, only the first session will erase the cdrw. Otherwise " +"the cdrw is erased before each backup." +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "USB printer" +msgstr "USB" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Right \"Windows\" key" +msgstr "Kanan Tetingkap" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, check empty password in /etc/shadow." +msgstr "ya kosong dalam." + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Before continuing, you should carefully read the terms of the license. It\n" +"covers the entire Mandrake Linux distribution. If you do agree with all the\n" +"terms in it, check the \"%s\" box. If not, simply turn off your computer." +msgstr "dalam off." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"Here is a list of the available printing options for the current printer:\n" +"\n" +msgstr "" + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "Resolutions" +msgstr "" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "" +"drakfirewall configurator\n" +"\n" +"This configures a personal firewall for this Mandrake Linux machine.\n" +"For a powerful and dedicated firewall solution, please look to the\n" +"specialized MandrakeSecurity Firewall distribution." +msgstr "dan." + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "" +"Please enter your username, password and domain name to access this host." +msgstr "dan." + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Remove selected host" +msgstr "Buang" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "Network configuration" +msgstr "Rangkaian" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "No sharing" +msgstr "Tidak" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Move selected rule down one level" +msgstr "" + +#: ../../common.pm:1 +#, c-format +msgid "TB" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "FATAL" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Refresh the list" +msgstr "Daftar user" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "" +"The DHCP server will allow other computer to boot using PXE in the given " +"range of address.\n" +"\n" +"The network address is %s using a netmask of %s.\n" +"\n" +msgstr "DHCP dalam" + +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../standalone/drakperm:1 ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Delete" +msgstr "Padam" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "" +"I can setup your computer to automatically start the graphical interface " +"(XFree) upon booting.\n" +"Would you like XFree to start when you reboot?" +msgstr "mula mula?" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "Build the disk" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Disconnect %s" +msgstr "Putus" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Status:" +msgstr "Status:" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "HTTP proxy" +msgstr "HTTP" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "SSH Server" +msgstr "SSH" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "\t-Network by rsync.\n" +msgstr "Rangkaian" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "European protocol" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid ", printer \"%s\" on server \"%s\"" +msgstr "on" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Note that currently all 'net' media also use the hard drive." +msgstr "" + +#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1 +#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 +#: ../../standalone/drakboot:1 ../../standalone/drakbug:1 +#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Error" +msgstr "Ralat" + +#: ../../any.pm:1 +#, c-format +msgid "allow \"su\"" +msgstr "" + +#: ../../lang.pm:1 ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "Australia" +msgstr "Australia" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "please wait during ttmkfdir..." +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "Configure only card \"%s\"%s" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Level" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Change the printing system" +msgstr "Ubah" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "" +"Your system supports multiple head configuration.\n" +"What do you want to do?" +msgstr "" + +#: ../../steps.pm:1 +#, c-format +msgid "Configure services" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Broadcast Address:" +msgstr "Alamat:" + +#: ../../partition_table.pm:1 +#, c-format +msgid "mount failed: " +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "" +"the GNU/Linux kernel needs to run a calculation loop at boot time to " +"initialize a timer counter. Its result is stored as bogomips as a way to " +"\"benchmark\" the cpu." +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Image" +msgstr "Imej" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP." +msgstr "Gagal Pejabat." + +#: ../../services.pm:1 +#, c-format +msgid "Remote Administration" +msgstr "" + +#: ../../modules.pm:1 +#, fuzzy, c-format +msgid "" +"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel." +msgstr "tidak." + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Selected All" +msgstr "" + +#: ../../printer/data.pm:1 +#, fuzzy, c-format +msgid "CUPS - Common Unix Printing System" +msgstr "Cetakan" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Webmin Service" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "device" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Enter the directory to save to:" +msgstr "Enter direktori:" + +#: ../../crypto.pm:1 ../../lang.pm:1 +#, fuzzy, c-format +msgid "Greece" +msgstr "Greek" + +#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "All" +msgstr "Semua" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Which printing system (spooler) do you want to use?" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "July" +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Prints into %s" +msgstr "Cetakan" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "An error occurred" +msgstr "ralat" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "" +"This package must be upgraded.\n" +"Are you sure you want to deselect it?" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Tamil (Typewriter-layout)" +msgstr "" + +#: ../../security/help.pm:1 +#, c-format +msgid "Use password to authenticate users." +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"Allow/Forbid the list of users on the system on display managers (kdm and " +"gdm)." +msgstr "on on dan." + +#: ../../standalone/drakautoinst:1 +#, c-format +msgid "manual" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Filename text to search for:" +msgstr "Namafail:" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer manufacturer, model, driver" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "" +"There is no medium or it is write-protected for device %s.\n" +"Please insert one." +msgstr "tidak." + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Directory %s already contains data\n" +"(%s)" +msgstr "Direktori" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Printer on NetWare server" +msgstr "on" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Give the ram size in MB" +msgstr "dalam" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Friday" +msgstr "" + +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Disconnection from Internet complete." +msgstr "Internet." + +#: ../../any.pm:1 +#, c-format +msgid "Real name" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "done" +msgstr "siap" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Please uncheck or remove it on next time." +msgstr "on." + +#: ../../security/level.pm:1 +#, c-format +msgid "Higher" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Choose the partitions you want to format" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "" +"No TV Card has been detected on your machine. Please verify that a Linux-" +"supported Video/TV Card is correctly plugged in.\n" +"\n" +"\n" +"You can visit our hardware database at:\n" +"\n" +"\n" +"http://www.linux-mandrake.com/en/hardware.php3" +msgstr "" +"Tidak on Video dalam\n" +"http://www.linux-mandrake.com/en/hardware.php3" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Can't find %s on %s" +msgstr "on" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Japanese 106 keys" +msgstr "Jepun" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Could not install the packages needed to share your scanner(s)." +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "This will take a few minutes." +msgstr "minit." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Burkina Faso" +msgstr "Burkina Faso" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "June" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Use scanners on remote computers" +msgstr "on" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Delete selected rule" +msgstr "Padam" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Accessing printers on remote CUPS servers" +msgstr "on" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Insert a floppy in %s" +msgstr "dalam" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Maldives" +msgstr "Maldives" + +#: ../../any.pm:1 +#, c-format +msgid "compact" +msgstr "" + +#: ../../common.pm:1 +#, c-format +msgid "1 minute" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "type: fat" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "on channel %d id %d\n" +msgstr "on" + +#: ../../printer/main.pm:1 +#, c-format +msgid ", multi-function device" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Laos" +msgstr "Laos" + +#: ../../share/advertising/04-configuration.pl:1 +#, fuzzy, c-format +msgid "" +"Mandrake Linux 9.2 provides you with the Mandrake Control Center, a powerful " +"tool to fully adapt your computer to the use you make of it. Configure and " +"customize elements such as the security level, the peripherals (screen, " +"mouse, keyboard...), the Internet connection and much more!" +msgstr "dan Internet dan!" + +#: ../../security/help.pm:1 +#, c-format +msgid "Activate/Disable ethernet cards promiscuity check." +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "There is no FAT partition to resize (or not enough space left)" +msgstr "tidak" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Up" +msgstr "Naik" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Firewall" +msgstr "" + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "Area:" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "(E)IDE/ATA controllers" +msgstr "" + +#: ../../fs.pm:1 +#, fuzzy, c-format +msgid "All I/O to the file system should be done synchronously." +msgstr "Semua fail siap." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer Server" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Custom configuration" +msgstr "Tersendiri" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "" +"Please indicate where the installation image will be available.\n" +"\n" +"If you do not have an existing directory, please copy the CD or DVD " +"contents.\n" +"\n" +msgstr "direktori" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Saint Pierre and Miquelon" +msgstr "dan" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "September" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "saving Bootsplash theme..." +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Portugal" +msgstr "Portugal" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "Do you have another one?" +msgstr "" + +#: ../../printer/main.pm:1 +#, c-format +msgid ", printing to %s" +msgstr "" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Assign host name from DHCP address" +msgstr "DHCP" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Toggle to normal mode" +msgstr "normal" + +#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1 +#, fuzzy, c-format +msgid "Generic" +msgstr "Generik" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Cylinder %d to %d\n" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "New profile..." +msgstr "Baru." + +#: ../../standalone/draksec:1 +#, c-format +msgid "NONE" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Which disk do you want to move it to?" +msgstr "" + +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "Display logo on Console" +msgstr "Paparan on" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Windows Domain" +msgstr "Tetingkap" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Saami (norwegian)" +msgstr "" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "Interface %s (on network %s)" +msgstr "Antaramuka on" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "INFO" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Wallis and Futuna" +msgstr "dan" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Need to create /etc/dhcpd.conf first!" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Is FPU present" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "There are no scanners found which are available on your system.\n" +msgstr "tidak on" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"No additional information\n" +"about this service, sorry." +msgstr "Tidak." + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Build Single NIC -->" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Marshall Islands" +msgstr "Kepulauan Marshall" + +#: ../../ugtk2.pm:1 +#, c-format +msgid "Is this correct?" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Windows (FAT32)" +msgstr "Tetingkap" + +#: ../../steps.pm:1 +#, c-format +msgid "Root password" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Build All Kernels -->" +msgstr "Semua" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "DVDRAM device" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, report unowned files." +msgstr "ya fail." + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"This is HardDrake, a Mandrake hardware configuration tool.\n" +"<span foreground=\"royalblue3\">Version:</span> %s\n" +"<span foreground=\"royalblue3\">Author:</span> Thierry Vignaud <tvignaud" +"\\@mandrakesoft.com>\n" +"\n" +msgstr "" +"\n" +"<span foreground=\"royalblue3\"> Versi</span>\n" +"<span foreground=\"royalblue3\"></span><>" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "" +"You don't have a swap partition.\n" +"\n" +"Continue anyway?" +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, fuzzy, c-format +msgid "Version: " +msgstr "Versi: " + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Server IP missing!" +msgstr "Pelayan IP!" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Suriname" +msgstr "Surinam" + +#: ../../network/adsl.pm:1 +#, fuzzy, c-format +msgid "Use a floppy" +msgstr "Simpan on" + +#: ../../any.pm:1 +#, c-format +msgid "Enable ACPI" +msgstr "" + +#: ../../fs.pm:1 +#, c-format +msgid "Give write access to ordinary users" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Graphical Environment" +msgstr "Grafikal" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Gibraltar" +msgstr "Gibraltar" + +#: ../../network/modem.pm:1 +#, c-format +msgid "Do nothing" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Delete Client" +msgstr "Padam" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Filesystem type: " +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Starting network..." +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Vietnam" +msgstr "Vietnam" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "/_Fields description" +msgstr "" + +#: ../../share/advertising/10-security.pl:1 +#, c-format +msgid "Optimize your security by using Mandrake Linux" +msgstr "" + +#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1 +#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1 +#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1 +#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1 +#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1 +#: ../../standalone/drakperm:1 ../../standalone/draksec:1 +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Help" +msgstr "Bantuan" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Check if the network devices are in promiscuous mode" +msgstr "dalam" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Your personal phone number" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Which size do you want to keep for Windows on" +msgstr "Tetingkap" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Test page(s) have been sent to the printer.\n" +"It may take some time before the printer starts.\n" +msgstr "Ujian" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Username required" +msgstr "Namapengguna" + +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "Device" +msgstr "Peranti RAID" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Depending on the default language you chose in Section , DrakX will\n" +"automatically select a particular type of keyboard configuration. However,\n" +"you may not have a keyboard that corresponds exactly to your language: for\n" +"example, if you are an English speaking Swiss person, you may have a Swiss\n" +"keyboard. Or if you speak English but are located in Quebec, you may find\n" +"yourself in the same situation where your native language and keyboard do\n" +"not match. In either case, this installation step will allow you to select\n" +"an appropriate keyboard from a list.\n" +"\n" +"Click on the \"%s\" button to be presented with the complete list of\n" +"supported keyboards.\n" +"\n" +"If you choose a keyboard layout based on a non-Latin alphabet, the next\n" +"dialog will allow you to choose the key binding that will switch the\n" +"keyboard between the Latin and non-Latin layouts." +msgstr "on default dalam English English dalam dalam dan Masuk on on dan." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "SMB (Windows 9x/NT) Printer Options" +msgstr "SMB Tetingkap" + +#: ../../printer/main.pm:1 +#, c-format +msgid "URI: %s" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Valid user list changed, rewriting config file." +msgstr "pengguna fail." + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "mkinitrd optional arguments" +msgstr "" + +#: ../../share/advertising/03-software.pl:1 +#, c-format +msgid "" +"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or " +"Kmail, create your documents with OpenOffice.org." +msgstr "" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "Protocol for the rest of the world" +msgstr "Protokol" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Print test pages" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Activate now" +msgstr "" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "64 MB or more" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Please select the test pages you want to print.\n" +"Note: the photo test page can take a rather long time to get printed and on " +"laser printers with too low memory it can even not come out. In most cases " +"it is enough to print the standard test page." +msgstr "dan on keluar Masuk." + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Please select the device where your %s is attached" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Not formatted\n" +msgstr "" + +#: ../../standalone/draksec:1 +#, c-format +msgid "Periodic Checks" +msgstr "" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "PXE Server Configuration" +msgstr "Pelayan" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup the system files before:" +msgstr "fail:" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "" +"This is the standard security recommended for a computer that will be used " +"to connect to the Internet as a client." +msgstr "Internet." + +#: ../../any.pm:1 +#, c-format +msgid "First floppy drive" +msgstr "" + +#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "/File/_Quit" +msgstr "Fail" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Dvorak" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Choose the new size" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Media class" +msgstr "" + +#: ../../standalone/XFdrake:1 +#, fuzzy, c-format +msgid "You need to log out and back in again for changes to take effect" +msgstr "keluar dan dalam" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "The %s is not known by this version of Scannerdrake." +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Faroe Islands" +msgstr "Kepulauan Faroe" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Restart XFS" +msgstr "Ulanghidup" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Add host/network" +msgstr "Tambah" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Scannerdrake will not be started now." +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "Model name" +msgstr "Model" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Albania" +msgstr "Albania" + +#: ../../lang.pm:1 +#, c-format +msgid "British Indian Ocean Territory" +msgstr "Kawasan Ocean India British" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Normal Mode" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "No CD-R/DVD-R in drive!" +msgstr "Tidak dalam!" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer connection type" +msgstr "" + +#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "No network adapter on your system!" +msgstr "Tidak on!" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Network %s" +msgstr "Rangkaian" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Malayalam" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Option %s out of range!" +msgstr "keluar!" + +#: ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Connect %s" +msgstr "Sambung" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Restarting CUPS..." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printing/Scanning/Photo Cards on \"%s\"" +msgstr "Cetakan Kad on" + +#: ../../install_steps.pm:1 +#, c-format +msgid "Duplicate mount point %s" +msgstr "" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, run chkrootkit checks." +msgstr "ya." + +#: ../../network/tools.pm:1 +#, c-format +msgid "Connection Configuration" +msgstr "" + +#: ../../harddrake/v4l.pm:1 +#, fuzzy, c-format +msgid "Unknown|Generic" +msgstr "Entah" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"At the time you are installing Mandrake Linux, it is likely that some\n" +"packages have been updated since the initial release. Bugs may have been\n" +"fixed, security issues resolved. To allow you to benefit from these\n" +"updates, you are now able to download them from the Internet. Check \"%s\"\n" +"if you have a working Internet connection, or \"%s\" if you prefer to\n" +"install updated packages later.\n" +"\n" +"Choosing \"%s\" will display a list of places from which updates can be\n" +"retrieved. You should choose one nearer to you. A package-selection tree\n" +"will appear: review the selection, and press \"%s\" to retrieve and install\n" +"the selected package(s), or \"%s\" to abort." +msgstr "Kepada Internet Internet A dan dan." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Myanmar" +msgstr "Myanmar" + +#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1 +#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1 +#: ../../standalone/draksplash:1 ../../standalone/harddrake2:1 +#: ../../standalone/logdrake:1 ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Quit" +msgstr "Keluar" + +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Auto allocate" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Check bad blocks?" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Other MultiMedia devices" +msgstr "Lain-lain" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "burner" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid " (Default is all users)" +msgstr "Default" + +#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "No remote machines" +msgstr "Tidak" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Welcome to the Printer Setup Wizard\n" +"\n" +"This wizard will help you to install your printer(s) connected to this " +"computer.\n" +"\n" +"If you have printer(s) connected to this machine, Please plug it/them in on " +"this computer and turn it/them on so that it/they can be auto-detected.\n" +"\n" +" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want " +"to set up your printer(s) now." +msgstr "" +"dalam on dan on\n" +" on Berikutnya dan on Batal." + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Authentication NIS" +msgstr "Pengesahan" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"Option ``Restrict command line options'' is of no use without a password" +msgstr "tidak" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Internet Connection Sharing currently enabled" +msgstr "Internet" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "United Arab Emirates" +msgstr "Emiriah Arab Bersatu" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Card IO_0" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Disable Local Config" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Thailand" +msgstr "Thailand" + +#: ../../network/tools.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Card IO_1" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "Search:" +msgstr "Cari:" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Kazakhstan" +msgstr "Kazakhstan" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Routers:" +msgstr "" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Write" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Display all available remote CUPS printers" +msgstr "Paparan" + +#: ../../install_steps_newt.pm:1 +#, c-format +msgid "Mandrake Linux Installation %s" +msgstr "" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "Unknown driver" +msgstr "Entah" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Thai keyboard" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Bouvet Island" +msgstr "Bouvet Island" + +#: ../../network/modem.pm:1 +#, c-format +msgid "Dialup options" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "If no port is given, 631 will be taken as default." +msgstr "tidak default." + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"Change your Cd-Rom!\n" +"\n" +"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " +"done.\n" +"If you don't have it, press Cancel to avoid installation from this Cd-Rom." +msgstr "Ubah dalam dan Ok siap Batal." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Polish" +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Mandrake Online" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "\t-Network by webdav.\n" +msgstr "Rangkaian" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid ", multi-function device on a parallel port" +msgstr "on" + +#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "" +"No ethernet network adapter has been detected on your system. Please run the " +"hardware configuration tool." +msgstr "Tidak on." + +#: ../../network/network.pm:1 ../../standalone/drakconnect:1 +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Netmask" +msgstr "Netmask" + +#: ../../diskdrake/hd_gtk.pm:1 +#, fuzzy, c-format +msgid "No hard drives found" +msgstr "Tidak" + +#: ../../mouse.pm:1 +#, c-format +msgid "2 buttons" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "Logitech CC Series" +msgstr "" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "What kind is your ISDN connection?" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Label" +msgstr "Label" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Save on floppy" +msgstr "Simpan on" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Check open ports" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Edit selected printer" +msgstr "Edit" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer auto-detection" +msgstr "" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "Which of the following is your ISDN card?" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"NFS is a popular protocol for file sharing across TCP/IP networks.\n" +"This service provides NFS server functionality, which is configured via the\n" +"/etc/exports file." +msgstr "fail IP fail." + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Msec" +msgstr "" + +#: ../../interactive/stdio.pm:1 +#, fuzzy, c-format +msgid "" +"=> Notice, a label changed:\n" +"%s" +msgstr "Notis" + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "Number of capture buffers:" +msgstr "" + +#: ../../interactive/stdio.pm:1 +#, fuzzy, c-format +msgid "Your choice? (0/1, default `%s') " +msgstr "default " + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Any partitions that have been newly defined must be formatted for use\n" +"(formatting means creating a file system).\n" +"\n" +"At this time, you may wish to reformat some already existing partitions to\n" +"erase any data they contain. If you wish to do that, please select those\n" +"partitions as well.\n" +"\n" +"Please note that it is not necessary to reformat all pre-existing\n" +"partitions. You must reformat the partitions containing the operating\n" +"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" +"reformat partitions containing data that you wish to keep (typically\n" +"\"/home\").\n" +"\n" +"Please be careful when selecting partitions. After formatting, all data on\n" +"the selected partitions will be deleted and you will not be able to recover\n" +"it.\n" +"\n" +"Click on \"%s\" when you are ready to format partitions.\n" +"\n" +"Click on \"%s\" if you want to choose another partition for your new\n" +"Mandrake Linux operating system installation.\n" +"\n" +"Click on \"%s\" if you wish to select partitions that will be checked for\n" +"bad blocks on the disk." +msgstr "fail on dan on on on on." + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "French" +msgstr "Perancis" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Czech (QWERTY)" +msgstr "Czech" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Allow X Window connections" +msgstr "" + +#: ../../standalone/service_harddrake:1 +#, fuzzy, c-format +msgid "Hardware probing in progress" +msgstr "Perkakasan dalam" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Net Device" +msgstr "" + +#: ../../install_steps_interactive.pm:1 ../../steps.pm:1 +#, fuzzy, c-format +msgid "Summary" +msgstr "Ringkasan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., " +"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)." +msgstr "USB USB." + +#: ../../network/adsl.pm:1 ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "Next" +msgstr "Berikutnya" + +#: ../../bootloader.pm:1 +#, fuzzy, c-format +msgid "You can't install the bootloader on a %s partition\n" +msgstr "on" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "CHAP" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Puerto Rico" +msgstr "Puerto Rico" + +#: ../../network/network.pm:1 +#, c-format +msgid "(bootp/dhcp/zeroconf)" +msgstr "" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "" +"\n" +"Welcome.\n" +"\n" +"The parameters of the auto-install are available in the sections on the left" +msgstr "dalam on" + +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "" +"package 'ImageMagick' is required to be able to complete configuration.\n" +"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit" +msgstr "Ok Batal" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Lithuanian \"number row\" QWERTY" +msgstr "" + +#: ../../install_any.pm:1 +#, c-format +msgid "" +"The following packages will be removed to allow upgrading your system: %s\n" +"\n" +"\n" +"Do you really want to remove these packages?\n" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Anguilla" +msgstr "Anguilla" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "NIS Domain" +msgstr "NIS" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Antarctica" +msgstr "Antarctika" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +"- User Files:\n" +msgstr "Pengguna" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Mount options" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Jamaica" +msgstr "Jamaica" + +#: ../../services.pm:1 +#, c-format +msgid "" +"Assign raw devices to block devices (such as hard drive\n" +"partitions), for the use of applications such as Oracle or DVD players" +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "Please wait, preparing installation..." +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Czech (QWERTZ)" +msgstr "Czech" + +#: ../../network/network.pm:1 +#, c-format +msgid "Track network card id (useful for laptops)" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "The port number should be an integer!" +msgstr "" + +#: ../../standalone/draksplash:1 +#, fuzzy, c-format +msgid "You must choose an image file first!" +msgstr "fail!" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore from Hard Disk." +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Add to LVM" +msgstr "Tambah" + +#: ../../network/network.pm:1 +#, c-format +msgid "DNS server" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Trinidad and Tobago" +msgstr "Trinidad dan Tobago" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "LPD and LPRng do not support IPP printers.\n" +msgstr "dan" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Host name or IP." +msgstr "Hos IP." + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_Edit" +msgstr "Edit" + +#: ../../fsedit.pm:1 +#, c-format +msgid "simple" +msgstr "" + +#: ../../help.pm:1 ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Clear all" +msgstr "Kosongkan" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "No test pages" +msgstr "Tidak" + +#: ../../lang.pm:1 +#, c-format +msgid "Falkland Islands (Malvinas)" +msgstr "Kepulauan Falkland" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "Adapter %s: %s" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "Boot disk creation" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Monday" +msgstr "" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Unknown model" +msgstr "Entah" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, check files/directories writable by everybody." +msgstr "ya fail." + +#: ../../help.pm:1 +#, c-format +msgid "authentication" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Backup Now" +msgstr "" + +#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1 +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_File" +msgstr "/_Fail" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Removing printer from Star Office/OpenOffice.org/GIMP" +msgstr "Pejabat" + +#: ../../services.pm:1 +#, c-format +msgid "" +"Launch packet filtering for Linux kernel 2.2 series, to set\n" +"up a firewall to protect your machine from network attacks." +msgstr "" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Editable" +msgstr "dimatikan" + +#: ../../network/ethernet.pm:1 +#, fuzzy, c-format +msgid "Which dhcp client do you want to use ? (default is dhcp-client)" +msgstr "default" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Tamil (ISCII-layout)" +msgstr "" + +#: ../../lang.pm:1 +#, c-format +msgid "Mayotte" +msgstr "Mayotte" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Set shell commands history size. A value of -1 means unlimited." +msgstr "A." + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "%d KB\n" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "Creating auto install floppy..." +msgstr "Mencipta." + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Searching for scanners ..." +msgstr "Mencari." + +#: ../../lang.pm:1 +#, c-format +msgid "Russia" +msgstr "" + +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Partitioning" +msgstr "Pempartisyenan" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid "ethernet card(s) detected" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Syslog" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Can't create catalog!" +msgstr "" + +#: ../../share/advertising/11-mnf.pl:1 +#, fuzzy, c-format +msgid "" +"Complete your security setup with this very easy-to-use software which " +"combines high performance components such as a firewall, a virtual private " +"network (VPN) server and client, an intrusion detection system and a traffic " +"manager." +msgstr "Selesai dan dan." + +#: ../../fsedit.pm:1 +#, c-format +msgid "Not enough free space for auto-allocating" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Set root password" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Enable IP spoofing protection" +msgstr "IP" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "" +"There's no free driver for your sound card (%s), but there's a proprietary " +"driver at \"%s\"." +msgstr "tidak." + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Group :" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "After resizing partition %s, all data on this partition will be lost" +msgstr "on" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Internet connection configuration" +msgstr "Internet" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "Add the name as an exception to the handling of password aging by msec." +msgstr "Tambah." + +#: ../../standalone/drakxtv:1 +#, c-format +msgid "Scanning for TV channels" +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Kernel:" +msgstr "" + +#: ../../standalone/harddrake2:1 ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_About..." +msgstr "Perihal." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Bengali" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Preference: " +msgstr "" + +#: ../../install_steps_interactive.pm:1 ../../services.pm:1 +#, fuzzy, c-format +msgid "Services: %d activated for %d registered" +msgstr "Perkhidmatan" + +#: ../../any.pm:1 +#, c-format +msgid "Create a bootdisk" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Solomon Islands" +msgstr "Kepulauan Solomon" + +#: ../../standalone/mousedrake:1 +#, c-format +msgid "Please test your mouse:" +msgstr "" + +#: ../../modules/interactive.pm:1 +#, c-format +msgid "(module %s)" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Workgroup" +msgstr "Kumpulankerja" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Printer host name or IP" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Host Path or Module" +msgstr "Hos" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Name of printer should contain only letters, numbers and the underscore" +msgstr "Nama dan" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "Show current interface configuration" +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Add Printer" +msgstr "Tambah" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"The argument specifies if clients are authorized to connect\n" +"to the X server from the network on the tcp port 6000 or not." +msgstr "on." + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Development" +msgstr "Pembangunan" + +#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1 +#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1 +#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Done" +msgstr "Selesai" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "Web Server" +msgstr "Pelayan Web" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Chile" +msgstr "Chile" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "\tDo not include System Files\n" +msgstr "Sistem" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The inkjet printer drivers provided by Lexmark only support local printers, " +"no printers on remote machines or print server boxes. Please connect your " +"printer to a local port or configure it on the machine where it is connected " +"to." +msgstr "lokal tidak on lokal on." + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Your multi-function device was configured automatically to be able to scan. " +"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the " +"scanner when you have more than one) from the command line or with the " +"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, " +"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire" +"\" menu. Call also \"man scanimage\" on the command line to get more " +"information.\n" +"\n" +"Do not use \"scannerdrake\" for this device!" +msgstr "dalam Fail on!" + +#: ../../any.pm:1 +#, c-format +msgid "(already added %s)" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Bootloader installation in progress" +msgstr "PemuatBoot dalam" + +#: ../../printer/main.pm:1 +#, c-format +msgid ", using command %s" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Alt and Shift keys simultaneously" +msgstr "Alt dan Shif" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Flags" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Add/Del Users" +msgstr "Tambah" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Host/network IP address missing." +msgstr "Hos IP." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "weekly" +msgstr "" + +#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1 +#, fuzzy, c-format +msgid "Settings" +msgstr "Setting" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "The entered host/network IP is not correct.\n" +msgstr "IP" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Create/Transfer backup keys for SSH" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Here is the full list of available countries" +msgstr "penuh" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Alternative test page (A4)" +msgstr "A4" + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "" +"If you have all the CDs in the list below, click Ok.\n" +"If you have none of those CDs, click Cancel.\n" +"If only some CDs are missing, unselect them, then click Ok." +msgstr "dalam Ok tiada Batal Ok." + +#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 +#, c-format +msgid "Wait please" +msgstr "" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "PAP" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup user files" +msgstr "pengguna" + +#: ../../diskdrake/dav.pm:1 +#, fuzzy, c-format +msgid "New" +msgstr "Baru" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"This is the most crucial decision point for the security of your GNU/Linux\n" +"system: you have to enter the \"root\" password. \"Root\" is the system\n" +"administrator and is the only user authorized to make updates, add users,\n" +"change the overall system configuration, and so on. In short, \"root\" can\n" +"do everything! That is why you must choose a password that is difficult to\n" +"guess - DrakX will tell you if the password that you chose too easy. As you\n" +"can see, you are not forced to enter a password, but we strongly advise you\n" +"against this. GNU/Linux is just as prone to operator error as any other\n" +"operating system. Since \"root\" can overcome all limitations and\n" +"unintentionally erase all data on partitions by carelessly accessing the\n" +"partitions themselves, it is important that it be difficult to become\n" +"\"root\".\n" +"\n" +"The password should be a mixture of alphanumeric characters and at least 8\n" +"characters long. Never write down the \"root\" password -- it makes it far\n" +"too easy to compromise a system.\n" +"\n" +"One caveat -- do not make the password too long or complicated because you\n" +"must be able to remember it!\n" +"\n" +"The password will not be displayed on screen as you type it in. To reduce\n" +"the chance of a blind typing error you will need to enter the password\n" +"twice. If you do happen to make the same typing error twice, this\n" +"``incorrect'' password will be the one you will have use the first time you\n" +"connect.\n" +"\n" +"If you wish access to this computer to be controlled by an authentication\n" +"server, click the \"%s\" button.\n" +"\n" +"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n" +"services, select the appropriate one for \"%s\". If you do not know which\n" +"one to use, you should ask your network administrator.\n" +"\n" +"If you happen to have problems with remembering passwords, if your computer\n" +"will never be connected to the internet or that you absolutely trust\n" +"everybody who uses your computer, you can choose to have \"%s\"." +msgstr "" +"dan pengguna dan on Masuk ralat dan on dan Tidak sekali on dalam Kepada " +"ralat ralat LDAP NIS Tetingkap Domain tiada." + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Name resolution spoofing protection" +msgstr "Nama" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"At this point, DrakX will allow you to choose the security level desired\n" +"for the machine. As a rule of thumb, the security level should be set\n" +"higher if the machine will contain crucial data, or if it will be a machine\n" +"directly exposed to the Internet. The trade-off of a higher security level\n" +"is generally obtained at the expense of ease of use.\n" +"\n" +"If you do not know what to choose, stay with the default option." +msgstr "Internet off default." + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Load from floppy" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "The following printer was auto-detected. " +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Uses command %s" +msgstr "%s pada %s" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Boot Floppy" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Norwegian" +msgstr "Norwegian" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Searching for new scanners ..." +msgstr "Mencari." + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Apache World Wide Web Server" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "stepping of the cpu (sub model (generation) number)" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "select path to restore (instead of /)" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "Configure bootsplash picture" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Georgia" +msgstr "Georgia" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "China" +msgstr "China" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid " (Make sure that all your printers are connected and turned on).\n" +msgstr "dan on" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Reading data of installed printers..." +msgstr "Membaca." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid " Erase Now " +msgstr "" + +#: ../../fsedit.pm:1 +#, c-format +msgid "server" +msgstr "" + +#: ../../install_any.pm:1 +#, fuzzy, c-format +msgid "Insert a FAT formatted floppy in drive %s" +msgstr "dalam" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "yes means the processor has an arithmetic coprocessor" +msgstr "ya" + +#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Please Wait... Applying the configuration" +msgstr "" + +#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) +#. -PO: and keep them smaller than 79 chars long +#: ../../bootloader.pm:1 +#, fuzzy, c-format +msgid "Welcome to GRUB the operating system chooser!" +msgstr "Selamat Datang!" + +#: ../../bootloader.pm:1 +#, c-format +msgid "Grub" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "SCSI controllers" +msgstr "" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid " on LPD server \"%s\", printer \"%s\"" +msgstr "on" + +#: ../../standalone/drakedm:1 +#, c-format +msgid "Choosing a display manager" +msgstr "" + +#: ../../network/ethernet.pm:1 ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Zeroconf Host name" +msgstr "Hos" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Custom setup/crontab entry:" +msgstr "Tersendiri:" + +#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "IP address should be in format 1.2.3.4" +msgstr "IP dalam" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Configure CUPS printing system" +msgstr "Ubah" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Ecuador" +msgstr "Ecuador" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Add an item" +msgstr "Tambah" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "The printers on this machine are available to other computers" +msgstr "on" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "I can't find needed image file `%s'." +msgstr "fail." + +#: ../../install_steps_interactive.pm:1 +#, fuzzy, c-format +msgid "No sound card detected. Try \"harddrake\" after installation" +msgstr "Tidak" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "" +"Invalid port given: %s.\n" +"The proper format is \"port/tcp\" or \"port/udp\", \n" +"where port is between 1 and 65535." +msgstr "dan." + +#: ../../any.pm:1 +#, c-format +msgid "Shell" +msgstr "Shell" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Sao Tome and Principe" +msgstr "Sao Tome and Principe" + +#: ../../network/isdn.pm:1 +#, c-format +msgid "PCI" +msgstr "" + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, c-format +msgid "Can't login using username %s (bad password?)" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Azerbaidjani (latin)" +msgstr "" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Package not installed" +msgstr "Pakej" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "American Samoa" +msgstr "Samoa Amerika" + +#: ../../share/advertising/12-mdkexpert.pl:1 +#, c-format +msgid "Become a MandrakeExpert" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Protocol" +msgstr "Protokol" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Copy fonts on your system" +msgstr "Salin on" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Harddrake help" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Bogomips" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Mandrake Terminal Server Configuration" +msgstr "Pelayan" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +" DrakBackup Report Details\n" +"\n" +"\n" +msgstr "" +"\n" +" Perincian" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Restore all backups" +msgstr "" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid " on parallel port #%s" +msgstr "on" + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "" +"Set the password minimum length and minimum number of digit and minimum " +"number of capitalized letters." +msgstr "dan dan." + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, check open ports." +msgstr "ya port." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "This may take a moment to erase the media." +msgstr "" + +#: ../../install_steps_gtk.pm:1 +#, c-format +msgid "You can't select/unselect this package" +msgstr "" + +#: ../../keyboard.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../harddrake/sound.pm:1 ../../network/modem.pm:1 +#: ../../standalone/drakfloppy:1 +#, fuzzy, c-format +msgid "Warning" +msgstr "Amaran" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +"- Other Files:\n" +msgstr "Lain-lain" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Remote host name" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "access to X programs" +msgstr "" + +#: ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Computing the size of the Windows partition" +msgstr "Tetingkap" + +#: ../../standalone/printerdrake:1 +#, c-format +msgid "/_Refresh" +msgstr "" + +#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1 +#: ../../standalone/drakxtv:1 +#, fuzzy, c-format +msgid "Italy" +msgstr "Itali" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Cayman Islands" +msgstr "Kepulauan Cayman" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Name of printer" +msgstr "Nama" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "disable" +msgstr "" + +#: ../../fs.pm:1 ../../partition_table.pm:1 +#, fuzzy, c-format +msgid "error unmounting %s: %s" +msgstr "ralat" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Do it!" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "%s not responding" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Select model manually" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Format" +msgstr "Format" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "" +"The most common way to connect with adsl is pppoe.\n" +"Some connections use pptp, a few use dhcp.\n" +"If you don't know, choose 'use pppoe'" +msgstr "" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Various" +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Zip" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Left Alt key" +msgstr "Kiri Alt" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Load setting" +msgstr "Tersendiri" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "" +"\n" +"\n" +"Printerdrake could not determine which model your printer %s is. Please " +"choose the correct model from the list." +msgstr "" + +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "Set selected printer as the default printer" +msgstr "default?" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"Mark the printers which you want to transfer and click \n" +"\"Transfer\"." +msgstr "dan." + +#: ../../printer/data.pm:1 +#, c-format +msgid "PDQ" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Albanian" +msgstr "Albania" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Lithuania" +msgstr "Lithuania" + +#: ../../any.pm:1 +#, c-format +msgid "Compact" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Detected model: %s %s" +msgstr "" + +#: ../../share/advertising/03-software.pl:1 +#, c-format +msgid "MandrakeSoft has selected the best software for you" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Local files" +msgstr "Setempat" + +#: ../../pkgs.pm:1 +#, c-format +msgid "maybe" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Panama" +msgstr "Panama" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Can't open %s!" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "" +"Your graphic card seems to have a TV-OUT connector.\n" +"It can be configured to work using frame-buffer.\n" +"\n" +"For this you have to plug your graphic card to your TV before booting your " +"computer.\n" +"Then choose the \"TVout\" entry in the bootloader\n" +"\n" +"Do you have this feature?" +msgstr "dalam?" + +#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1 +#, fuzzy, c-format +msgid "Monitor" +msgstr "Monitor" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"You are about to set up printing to a Windows account with password. Due to " +"a fault in the architecture of the Samba client software the password is put " +"in clear text into the command line of the Samba client used to transmit the " +"print job to the Windows server. So it is possible for every user on this " +"machine to display the password on the screen by issuing commands as \"ps " +"auxwww\".\n" +"\n" +"We recommend to make use of one of the following alternatives (in all cases " +"you have to make sure that only machines from your local network have access " +"to your Windows server, for example by means of a firewall):\n" +"\n" +"Use a password-less account on your Windows server, as the \"GUEST\" account " +"or a special account dedicated for printing. Do not remove the password " +"protection from a personal account or the administrator account.\n" +"\n" +"Set up your Windows server to make the printer available under the LPD " +"protocol. Then set up printing from this machine with the \"%s\" connection " +"type in Printerdrake.\n" +"\n" +msgstr "" +"Tetingkap dalam dalam Tetingkap pengguna on on dalam lokal Tetingkap on " +"Tetingkap Tetingkap dalam" + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "65 thousand colors (16 bits)" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +"- Save on Hard drive on path: %s\n" +msgstr "Simpan on on" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Remove fonts on your system" +msgstr "Buang on" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "" +"Warning, the network adapter (%s) is already configured.\n" +"\n" +"Do you want an automatic re-configuration?\n" +"\n" +"You can do it manually but you need to know what you're doing." +msgstr "Amaran secara manual." + +#: ../../Xconfig/various.pm:1 +#, fuzzy, c-format +msgid "Graphical interface at startup" +msgstr "Grafikal" + +#: ../../network/netconnect.pm:1 +#, c-format +msgid " adsl" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "format of floppies supported by the drive" +msgstr "" + +#: ../../network/adsl.pm:1 +#, c-format +msgid "Firmware copy failed, file %s not found" +msgstr "" + +#: ../../raid.pm:1 +#, fuzzy, c-format +msgid "Not enough partitions for RAID level %d\n" +msgstr "RAD" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "local config: true" +msgstr "lokal" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"The following printers are configured. Double-click on a printer to change " +"its settings; to make it the default printer; or to view information about " +"it." +msgstr "on default." + +#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1 +#, c-format +msgid "Connected" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Macedonian" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Mali" +msgstr "Mali" + +#: ../../harddrake/data.pm:1 +#, fuzzy, c-format +msgid "Bridges and system controllers" +msgstr "dan" + +#: ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "/File/_Save" +msgstr "Fail" + +#: ../../install_steps_gtk.pm:1 +#, fuzzy, c-format +msgid "No details" +msgstr "Tidak" + +#: ../../pkgs.pm:1 +#, c-format +msgid "very nice" +msgstr "" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "Preview" +msgstr "" + +#: ../../standalone/drakbug:1 +#, c-format +msgid "Remote Control" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Please select media for backup..." +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Wrong email" +msgstr "" + +#: ../../Xconfig/various.pm:1 +#, c-format +msgid "XFree86 server: %s\n" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Allow Thin Clients" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Georgian (\"Russian\" layout)" +msgstr "Russia" + +#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1 +#: ../../standalone/printerdrake:1 +#, fuzzy, c-format +msgid "/_Options" +msgstr "Aksi" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Your printer model" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"\n" +"\n" +"(WARNING! You're using XFS for your root partition,\n" +"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" +"because XFS needs a very large driver)." +msgstr "AMARAN on." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"\n" +"- Delete hard drive tar files after backup.\n" +msgstr "Padam fail" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "" +"No CD or DVD image found, please copy the installation program and rpm files." +msgstr "Tidak dan fail." + +#: ../../share/advertising/04-configuration.pl:1 +#, c-format +msgid "Mandrake's multipurpose configuration tool" +msgstr "" + +#: ../../standalone/drakbackup:1 ../../standalone/logdrake:1 +#, fuzzy, c-format +msgid "Save" +msgstr "Simpan" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "The %s is unsupported" +msgstr "" + +#: ../../services.pm:1 +#, c-format +msgid "Load the drivers for your usb devices." +msgstr "" + +#: ../../harddrake/data.pm:1 +#, c-format +msgid "Disk" +msgstr "" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Enter a printer device URI" +msgstr "Enter" + +#: ../../share/advertising/01-thanks.pl:1 +#, fuzzy, c-format +msgid "" +"The success of MandrakeSoft is based upon the principle of Free Software. " +"Your new operating system is the result of collaborative work of the " +"worldwide Linux Community." +msgstr "Bebas." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Israel" +msgstr "Israel" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "French Guiana" +msgstr "French Guiana" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "default:LTR" +msgstr "default" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "A command line must be entered!" +msgstr "A!" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Select user manually" +msgstr "pengguna" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Transfer printer configuration" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Do you want to enable printing on the printers mentioned above?\n" +msgstr "on" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Check additions/removals of suid root files" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "" +"For this to work for a W2K PDC, you will probably need to have the admin " +"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" +"add and reboot the server.\n" +"You will also need the username/password of a Domain Admin to join the " +"machine to the Windows(TM) domain.\n" +"If networking is not yet enabled, Drakx will attempt to join the domain " +"after the network setup step.\n" +"Should this setup fail for some reason and domain authentication is not " +"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) " +"Domain, and Admin Username/Password, after system boot.\n" +"The command 'wbinfo -t' will test whether your authentication secrets are " +"good." +msgstr "" +"C Tetingkap dan Domain Tetingkap dihidupkan dan Tetingkap Domain dan " +"Namapengguna Katalaluan." + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "%s (Port %s)" +msgstr "Liang" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use network connection to backup" +msgstr "" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "Kernel version" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"It is now time to specify which programs you wish to install on your\n" +"system. There are thousands of packages available for Mandrake Linux, and\n" +"to make it simpler to manage the packages have been placed into groups of\n" +"similar applications.\n" +"\n" +"Packages are sorted into groups corresponding to a particular use of your\n" +"machine. Mandrake Linux has four predefined installations available. You\n" +"can think of these installation classes as containers for various packages.\n" +"You can mix and match applications from the various groups, so a\n" +"``Workstation'' installation can still have applications from the\n" +"``Development'' group installed.\n" +"\n" +" * \"%s\": if you plan to use your machine as a workstation, select one or\n" +"more of the applications that are in the workstation group.\n" +"\n" +" * \"%s\": if plan on using your machine for programming, choose the\n" +"appropriate packages from that group.\n" +"\n" +" * \"%s\": if your machine is intended to be a server, select which of the\n" +"more common services you wish to install on your machine.\n" +"\n" +" * \"%s\": this is where you will choose your preferred graphical\n" +"environment. At least one must be selected if you want to have a graphical\n" +"interface available.\n" +"\n" +"Moving the mouse cursor over a group name will display a short explanatory\n" +"text about that group. If you unselect all groups when performing a regular\n" +"installation (as opposed to an upgrade), a dialog will pop up proposing\n" +"different options for a minimal installation:\n" +"\n" +" * \"%s\": install the minimum number of packages possible to have a\n" +"working graphical desktop.\n" +"\n" +" * \"%s\": installs the base system plus basic utilities and their\n" +"documentation. This installation is suitable for setting up a server.\n" +"\n" +" * \"%s\": will install the absolute minimum number of packages necessary\n" +"to get a working Linux system. With this installation you will only have a\n" +"command line interface. The total size of this installation is about 65\n" +"megabytes.\n" +"\n" +"You can check the \"%s\" box, which is useful if you are familiar with the\n" +"packages being offered or if you want to have total control over what will\n" +"be installed.\n" +"\n" +"If you started the installation in \"%s\" mode, you can unselect all groups\n" +"to avoid installing any new package. This is useful for repairing or\n" +"updating an existing system." +msgstr "" +"on dan dan Pembangunan\n" +" dalam\n" +" on\n" +" on\n" +"\n" +"\n" +" asas dan\n" +" jumlah jumlah dalam." + +#: ../../any.pm:1 ../../help.pm:1 +#, fuzzy, c-format +msgid "Accept user" +msgstr "Terima" + +#: ../../help.pm:1 ../../diskdrake/dav.pm:1 +#, fuzzy, c-format +msgid "Server" +msgstr "Pelayan" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Left Shift key" +msgstr "Kiri Shif" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid " local network" +msgstr "lokal" + +#: ../../interactive/stdio.pm:1 +#, c-format +msgid "Bad choice, try again\n" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Syslog reports to console 12" +msgstr "" + +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, fuzzy, c-format +msgid "Search new servers" +msgstr "Cari" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Heard and McDonald Islands" +msgstr "dan" + +#: ../../harddrake/sound.pm:1 +#, fuzzy, c-format +msgid "No alternative driver" +msgstr "Tidak" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Toggle to expert mode" +msgstr "" + +#: ../../printer/cups.pm:1 +#, fuzzy, c-format +msgid "(on this machine)" +msgstr "on" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "Gateway address should be in format 1.2.3.4" +msgstr "Gateway dalam" + +#: ../../network/modem.pm:1 +#, c-format +msgid "" +"\"%s\" based winmodem detected, do you want to install needed software ?" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Looking at packages already installed..." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use Differential Backups" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Driver" +msgstr "Jurupacu" + +#: ../../services.pm:1 +#, c-format +msgid "" +"Linuxconf will sometimes arrange to perform various tasks\n" +"at boot-time to maintain the system configuration." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "DVD-R device" +msgstr "" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printer on remote lpd server" +msgstr "on lpd" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "" +"Before installing any fonts, be sure that you have the right to use and " +"install them on your system.\n" +"\n" +"-You can install the fonts the normal way. In rare cases, bogus fonts may " +"hang up your X Server." +msgstr "dan on normal Masuk Pelayan." + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n" +"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n" +"detected and installed in the bootloader menu. If this is not the case, you\n" +"can add an entry by hand in this screen. Be careful to choose the correct\n" +"parameters.\n" +"\n" +"Yaboot's main options are:\n" +"\n" +" * Init Message: a simple text message displayed before the boot prompt.\n" +"\n" +" * Boot Device: indicates where you want to place the information required\n" +"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" +"to hold this information.\n" +"\n" +" * Open Firmware Delay: unlike LILO, there are two delays available with\n" +"yaboot. The first delay is measured in seconds and at this point, you can\n" +"choose between CD, OF boot, MacOS or Linux;\n" +"\n" +" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" +"After selecting Linux, you will have this delay in 0.1 second increments\n" +"before your default kernel description is selected;\n" +"\n" +" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" +"at the first boot prompt.\n" +"\n" +" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" +"Open Firmware at the first boot prompt.\n" +"\n" +" * Default OS: you can select which OS will boot by default when the Open\n" +"Firmware Delay expires." +msgstr "" +"dan dan dan dalam dalam utama\n" +" Mesej\n" +" Peranti RAID\n" +" Buka dalam saat dan\n" +" dalam default\n" +" C\n" +"\n" +" Default default Buka." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Wednesday" +msgstr "" + +#: ../../crypto.pm:1 ../../lang.pm:1 +#, fuzzy, c-format +msgid "Germany" +msgstr "Jerman" + +#: ../../crypto.pm:1 ../../lang.pm:1 +#, fuzzy, c-format +msgid "Austria" +msgstr "Austria" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "No mouse" +msgstr "Tidak" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Choose your CD/DVD media size (MB)" +msgstr "" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "Check permissions of files in the users' home" +msgstr "fail dalam" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Run \"sndconfig\" after installation to configure your sound card" +msgstr "" + +#: ../../ugtk2.pm:1 +#, c-format +msgid "Collapse Tree" +msgstr "" + +#: ../../standalone/drakautoinst:1 +#, fuzzy, c-format +msgid "Auto Install Configurator" +msgstr "Install" + +#: ../../steps.pm:1 +#, c-format +msgid "Configure networking" +msgstr "" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Where do you want to install the bootloader?" +msgstr "Dimana anda ingin pemuatbut ini dipasang?" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "" +"Your choice of preferred language will affect the language of the\n" +"documentation, the installer and the system in general. Select first the\n" +"region you are located in, and then the language you speak.\n" +"\n" +"Clicking on the \"%s\" button will allow you to select other languages to\n" +"be installed on your workstation, thereby installing the language-specific\n" +"files for system documentation and applications. For example, if you will\n" +"host users from Spain on your machine, select English as the default\n" +"language in the tree view and \"%s\" in the Advanced section.\n" +"\n" +"Note that you're not limited to choosing a single additional language. You\n" +"may choose several ones, or even install them all by selecting the \"%s\"\n" +"box. Selecting support for a language means translations, fonts, spell\n" +"checkers, etc. for that language will be installed. Additionally, the\n" +"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n" +"however that this is an experimental feature. If you select different\n" +"languages requiring different encoding the unicode support will be\n" +"installed anyway.\n" +"\n" +"To switch between the various languages installed on the system, you can\n" +"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n" +"language used by the entire system. Running the command as a regular user\n" +"will only change the language settings for that particular user." +msgstr "" +"dan dalam dalam dan on on dan Sepanyol on English default dalam dan dalam " +"Lanjutan tunggal on pengguna pengguna." + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "The %s is not supported by this version of Mandrake Linux." +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "tape" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "DHCP client" +msgstr "DHCP" + +#: ../../security/l10n.pm:1 +#, fuzzy, c-format +msgid "List users on display managers (kdm and gdm)" +msgstr "on dan" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "Logitech Mouse (serial, old C7 type)" +msgstr "Logitech Mouse (bersiri, jenis C7 lama)" + +#: ../../partition_table.pm:1 +#, fuzzy, c-format +msgid "Restoring from file %s failed: %s" +msgstr "fail" + +#: ../../fsedit.pm:1 +#, fuzzy, c-format +msgid "" +"I can't read the partition table of device %s, it's too corrupted for me :(\n" +"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" +"The other solution is to not allow DrakX to modify the partition table.\n" +"(the error is %s)\n" +"\n" +"Do you agree to lose all the partitions?\n" +msgstr "on ralat" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Are you sure that you want to set up printing on this machine?\n" +msgstr "on" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "New devfs device" +msgstr "Baru" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "ERROR: Cannot spawn %s." +msgstr "RALAT." + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Boot Style Configuration" +msgstr "Gaya:" + +#: ../../help.pm:1 +#, c-format +msgid "Automatic time synchronization" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Backup files not found at %s." +msgstr "fail." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Armenian (phonetic)" +msgstr "" + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "Card model:" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "Thin Client" +msgstr "" + +#: ../../share/advertising/01-thanks.pl:1 +#, c-format +msgid "Thank you for choosing Mandrake Linux 9.2" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Start Server" +msgstr "Mula" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Turkmenistan" +msgstr "Turkmenistan" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "All remote machines" +msgstr "Semua" + +#: ../../standalone/drakboot:1 +#, fuzzy, c-format +msgid "Install themes" +msgstr "Install" + +#: ../../help.pm:1 +#, c-format +msgid "Espanol" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "Preparing installation" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Edit selected host/network" +msgstr "Edit" + +#: ../../standalone/drakTermServ:1 +#, fuzzy, c-format +msgid "Add User -->" +msgstr "Tambah Pengguna" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Nauru" +msgstr "Nauru" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "True Type fonts installation" +msgstr "Jenis" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Auto-detect printers connected directly to the local network" +msgstr "lokal" + +#: ../../standalone/drakconnect:1 +#, c-format +msgid "LAN configuration" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "hard disk model" +msgstr "" + +#: ../../fsedit.pm:1 +#, c-format +msgid "You can't use a LVM Logical Volume for mount point %s" +msgstr "" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "Get Windows Fonts" +msgstr "Tetingkap" + +#: ../../mouse.pm:1 +#, fuzzy, c-format +msgid "Mouse Systems" +msgstr "Tetikus" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Iranian" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Croatia" +msgstr "Croatia" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Gateway:" +msgstr "Gateway:" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Add server" +msgstr "Tambah" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Remote printer name" +msgstr "" + +#: ../../share/advertising/10-security.pl:1 +#, fuzzy, c-format +msgid "" +"MandrakeSoft has designed exclusive tools to create the most secured Linux " +"version ever: Draksec, a system security management tool, and a strong " +"firewall are teamed up together in order to highly reduce hacking risks." +msgstr "dan dalam." + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Device: " +msgstr "Peranti RAID " + +#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1 +#, c-format +msgid "Printerdrake" +msgstr "" + +#: ../../install_steps_interactive.pm:1 +#, c-format +msgid "License agreement" +msgstr "" + +#: ../../standalone/draksec:1 +#, fuzzy, c-format +msgid "System Options" +msgstr "Sistem" + +#: ../../security/level.pm:1 +#, c-format +msgid "Please choose the desired security level" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "This host is already in the list, it cannot be added again.\n" +msgstr "dalam" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid ", USB printer" +msgstr "USB" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "" +"Unable to properly close mkbootdisk:\n" +"\n" +"<span foreground=\"Red\"><tt>%s</tt></span>" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "" +"Incremental backups only save files that have changed or are new since the " +"last backup." +msgstr "fail." + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Choose the applications that will support the fonts:" +msgstr "" + +#: ../../steps.pm:1 +#, c-format +msgid "Configure X" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "hd" +msgstr "Chad" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Turkish (traditional \"F\" model)" +msgstr "Turki" + +#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1 +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Congratulations!" +msgstr "Tahniah!" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Use owner id for execution" +msgstr "" + +#: ../../security/l10n.pm:1 +#, c-format +msgid "Allow remote root login" +msgstr "" + +#: ../../standalone/drakperm:1 +#, fuzzy, c-format +msgid "Down" +msgstr "Turun" + +#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Raw printer (No driver)" +msgstr "Tidak" + +#: ../../network/modem.pm:1 +#, fuzzy, c-format +msgid "Install rpm" +msgstr "Install" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"To print a file from the command line (terminal window) you can either use " +"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or " +"\"kprinter <file>\". The graphical tools allow you to choose the printer and " +"to modify the option settings easily.\n" +msgstr "Kepada fail<file><file><file> dan" + +#: ../../install_steps_gtk.pm:1 +#, fuzzy, c-format +msgid "Time remaining " +msgstr "Masa " + +#: ../../keyboard.pm:1 +#, c-format +msgid "UK keyboard" +msgstr "" + +#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1 +#: ../../diskdrake/smbnfs_gtk.pm:1 +#, c-format +msgid "Unmount" +msgstr "" + +#: ../../standalone/drakfont:1 +#, c-format +msgid "Uninstall Fonts" +msgstr "" + +#: ../../mouse.pm:1 +#, c-format +msgid "Microsoft Explorer" +msgstr "" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "German (no dead keys)" +msgstr "Jerman tidak" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\tSend mail to %s\n" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Transferring %s..." +msgstr "" + +#: ../../Xconfig/resolution_and_depth.pm:1 +#, c-format +msgid "32 thousand colors (15 bits)" +msgstr "" + +#: ../../any.pm:1 +#, c-format +msgid "" +"You can export using NFS or Samba. Please select which you'd like to use." +msgstr "" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Reboot" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Gambia" +msgstr "Gambia" + +#: ../../standalone/drakbug:1 +#, fuzzy, c-format +msgid "Mandrake Control Center" +msgstr "Pusat Kawalan Mandrake" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Multi-function device" +msgstr "on" + +#: ../../network/drakfirewall.pm:1 +#, fuzzy, c-format +msgid "" +"You can enter miscellaneous ports. \n" +"Valid examples are: 139/tcp 139/udp.\n" +"Have a look at /etc/services for information." +msgstr "port." + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "\t-Tape \n" +msgstr "" + +#: ../../standalone/drakhelp:1 +#, fuzzy, c-format +msgid "" +"No browser is installed on your system, Please install one if you want to " +"browse the help system" +msgstr "Tidak on" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Remember this password" +msgstr "" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "Internet Connection Sharing is now enabled." +msgstr "Internet dihidupkan." + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "\t-Network by SSH.\n" +msgstr "Rangkaian SSH" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +" If the desired printer was auto-detected, simply choose it from the list " +"and then add user name, password, and/or workgroup if needed." +msgstr "dan pengguna dan." + +#: ../../network/netconnect.pm:1 +#, c-format +msgid " cable" +msgstr "" + +#: ../../help.pm:1 ../../install_interactive.pm:1 +#, fuzzy, c-format +msgid "Use the free space on the Windows partition" +msgstr "on Tetingkap" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "%s found on %s, configure it automatically?" +msgstr "on?" + +#: ../../Xconfig/various.pm:1 +#, c-format +msgid "XFree86 driver: %s\n" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "This host/network is already in the list, it cannot be added again.\n" +msgstr "dalam" + +#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 +#, c-format +msgid "Choose the packages you want to install" +msgstr "" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Papua New Guinea" +msgstr "Papua New Guinea" + +#: ../../printer/main.pm:1 +#, fuzzy, c-format +msgid "Multi-function device on a parallel port" +msgstr "on" + +#: ../../keyboard.pm:1 +#, fuzzy, c-format +msgid "Serbian (cyrillic)" +msgstr "Serbian" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Enter the directory where backups are stored" +msgstr "Enter direktori" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "Make kernel message quiet by default" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "" +"Do you want to set this printer (\"%s\")\n" +"as the default printer?" +msgstr "default?" + +#: ../../standalone/drakgw:1 +#, fuzzy, c-format +msgid "The DHCP end range" +msgstr "DHCP" + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Creating bootdisk..." +msgstr "Mencipta." + +#: ../../standalone/net_monitor:1 +#, c-format +msgid "Wait please, testing your connection..." +msgstr "" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "Bringing down the network" +msgstr "" + +#: ../../network/modem.pm:1 ../../standalone/drakconnect:1 +#, c-format +msgid "Login ID" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"NFS is a popular protocol for file sharing across TCP/IP\n" +"networks. This service provides NFS file locking functionality." +msgstr "fail IP fail." + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "DHCP Client" +msgstr "DHCP" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "dismiss" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Printing/Scanning on \"%s\"" +msgstr "Cetakan on" + +#: ../../standalone/drakfloppy:1 +#, c-format +msgid "omit raid modules" +msgstr "" + +#: ../../services.pm:1 +#, fuzzy, c-format +msgid "" +"lpd is the print daemon required for lpr to work properly. It is\n" +"basically a server that arbitrates print jobs to printer(s)." +msgstr "lpd." + +#: ../../keyboard.pm:1 +#, c-format +msgid "Irish" +msgstr "" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Sunday" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "Internet Connection Configuration" +msgstr "Internet" + +#: ../../modules/parameters.pm:1 +#, c-format +msgid "comma separated numbers" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"Once you've selected a device, you'll be able to see the device information " +"in fields displayed on the right frame (\"Information\")" +msgstr "dalam on Maklumat" + +#: ../../standalone/drakperm:1 +#, c-format +msgid "Move selected rule up one level" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "" +"The following scanner\n" +"\n" +"%s\n" +"is available on your system.\n" +msgstr "on" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Do you really want to remove the printer \"%s\"?" +msgstr "" + +#: ../../install_interactive.pm:1 +#, c-format +msgid "I can't find any room for installing" +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, fuzzy, c-format +msgid "Default printer" +msgstr "Default" + +#: ../../network/netconnect.pm:1 +#, fuzzy, c-format +msgid "" +"You have configured multiple ways to connect to the Internet.\n" +"Choose the one you want to use.\n" +"\n" +msgstr "Internet" + +#: ../../diskdrake/interactive.pm:1 +#, c-format +msgid "Modify RAID" +msgstr "" + +#: ../../network/isdn.pm:1 +#, fuzzy, c-format +msgid "" +"I have detected an ISDN PCI card, but I don't know its type. Please select a " +"PCI card on the next screen." +msgstr "on." + +#: ../../any.pm:1 +#, fuzzy, c-format +msgid "Add user" +msgstr "Tambah" + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "RAID-disks %s\n" +msgstr "RAD" + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Liberia" +msgstr "Liberia" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "" +"Could not install the packages needed to set up a scanner with Scannerdrake." +msgstr "" + +#: ../../standalone/drakgw:1 +#, c-format +msgid "" +"Please enter the name of the interface connected to the internet.\n" +"\n" +"Examples:\n" +"\t\tppp+ for modem or DSL connections, \n" +"\t\teth0, or eth1 for cable connection, \n" +"\t\tippp+ for a isdn connection.\n" +msgstr "" + +#: ../../steps.pm:1 +#, c-format +msgid "Choose your keyboard" +msgstr "" + +#: ../../steps.pm:1 +#, fuzzy, c-format +msgid "Format partitions" +msgstr "Format" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Automatic correction of CUPS configuration" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, c-format +msgid "Running \"%s\" ..." +msgstr "" + +#: ../../harddrake/v4l.pm:1 +#, c-format +msgid "enable radio support" +msgstr "" + +#: ../../standalone/drakTermServ:1 +#, c-format +msgid "" +" - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n" +" \t\tThrough clusternfs, each diskless client can have its own unique " +"configuration files\n" +" \t\ton the root filesystem of the server. By allowing local client " +"hardware configuration, \n" +" \t\tdrakTermServ will help create these files." +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, fuzzy, c-format +msgid "Scanner sharing to hosts: " +msgstr "hos " + +#: ../../diskdrake/interactive.pm:1 +#, fuzzy, c-format +msgid "Loopback file name: %s" +msgstr "fail" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Please choose the printer to which the print jobs should go." +msgstr "" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Do not transfer printers" +msgstr "" + +#: ../../help.pm:1 +#, fuzzy, c-format +msgid "Delay before booting the default image" +msgstr "default" + +#: ../../standalone/drakfont:1 +#, fuzzy, c-format +msgid "" +"\n" +" Copyright (C) 2001-2002 by MandrakeSoft \n" +" DUPONT Sebastien (original version)\n" +" CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n" +"\n" +" This program is free software; you can redistribute it and/or modify\n" +" it under the terms of the GNU General Public License as published by\n" +" the Free Software Foundation; either version 2, or (at your option)\n" +" any later version.\n" +"\n" +" This program is distributed in the hope that it will be useful,\n" +" but WITHOUT ANY WARRANTY; without even the implied warranty of\n" +" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the\n" +" GNU General Public License for more details.\n" +"\n" +" You should have received a copy of the GNU General Public License\n" +" along with this program; if not, write to the Free Software\n" +" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n" +"\n" +" Thanks:\n" +" - pfm2afm: \n" +"\t by Ken Borgendale:\n" +"\t Convert a Windows .pfm file to a .afm (Adobe Font Metrics)\n" +" - type1inst:\n" +"\t by James Macnicol: \n" +"\t type1inst generates files fonts.dir fonts.scale & Fontmap.\n" +" - ttf2pt1: \n" +"\t by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin \n" +" Convert ttf font files to afm and pfb fonts\n" +msgstr "" +"\n" +" C\n" +"\n" +"<dchaumette\\@mandrakesoft.com>\n" +" dan\n" +" Umum\n" +" Bebas\n" +"\n" +" dalam\n" +"\n" +" A\n" +" Umum\n" +" Umum\n" +" Bebas\n" +"\n" +"\n" +" Tetingkap fail Font\n" +" fail\n" +"\n" +" fail dan" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Use Hard Disk to backup" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1 +#: ../../standalone/drakboot:1 ../../standalone/drakgw:1 +#, c-format +msgid "Configure" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Scannerdrake" +msgstr "" + +#: ../../standalone/drakconnect:1 +#, fuzzy, c-format +msgid "" +"Warning, another Internet connection has been detected, maybe using your " +"network" +msgstr "Amaran Internet" + +#: ../../standalone/drakbackup:1 +#, c-format +msgid "Backup Users" +msgstr "" + +#: ../../network/network.pm:1 +#, fuzzy, c-format +msgid "" +"Please enter your host name.\n" +"Your host name should be a fully-qualified host name,\n" +"such as ``mybox.mylab.myco.com''.\n" +"You may also enter the IP address of the gateway if you have one." +msgstr "IP." + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "Select Printer Spooler" +msgstr "" + +#: ../../standalone/drakboot:1 +#, c-format +msgid "Create new theme" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "Mandrake Tools Explanation" +msgstr "" + +#: ../../standalone/drakpxe:1 +#, fuzzy, c-format +msgid "No image found" +msgstr "Tidak" + +#: ../../install_steps.pm:1 +#, fuzzy, c-format +msgid "" +"Some important packages didn't get installed properly.\n" +"Either your cdrom drive or your cdrom is defective.\n" +"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" +"\"\n" +msgstr "on" + +#: ../../share/advertising/06-development.pl:1 +#, c-format +msgid "Mandrake Linux 9.2: the ultimate development platform" +msgstr "" + +#: ../../standalone/scannerdrake:1 +#, c-format +msgid "Detected model: %s" +msgstr "" + +#: ../../standalone/logdrake:1 +#, c-format +msgid "\"%s\" is not a valid email!" +msgstr "" + +#: ../../standalone/drakedm:1 +#, fuzzy, c-format +msgid "" +"X11 Display Manager allows you to graphically log\n" +"into your system with the X Window System running and supports running\n" +"several different X sessions on your local machine at the same time." +msgstr "Paparan Sistem dan on lokal." + +#: ../../security/help.pm:1 +#, fuzzy, c-format +msgid "if set to yes, run the daily security checks." +msgstr "ya." + +#: ../../lang.pm:1 +#, fuzzy, c-format +msgid "Azerbaijan" +msgstr "Azerbaijan" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "Device name to use for backup" +msgstr "Peranti RAID" + +#: ../../standalone/drakbackup:1 +#, fuzzy, c-format +msgid "No tape in %s!" +msgstr "Tidak dalam!" + +#: ../../standalone/drakhelp:1 +#, c-format +msgid "" +" --doc <link> - link to another web page ( for WM welcome " +"frontend)\n" +msgstr "" + +#: ../../keyboard.pm:1 +#, c-format +msgid "Dvorak (US)" +msgstr "" + +#: ../../standalone/harddrake2:1 +#, fuzzy, c-format +msgid "" +"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" +msgstr "on USB" + +#: ../../printer/printerdrake.pm:1 +#, c-format +msgid "How is the printer connected?" +msgstr "" + +#: ../../security/level.pm:1 +#, fuzzy, c-format +msgid "Security level" +msgstr "Keselamatan" + +#: ../../standalone/draksplash:1 +#, c-format +msgid "final resolution" +msgstr "" + +#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1 +#, fuzzy, c-format +msgid "Services" +msgstr "Perkhidmatan" + +#: ../../Xconfig/card.pm:1 +#, c-format +msgid "4 MB" +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Office Workstation" +msgstr "Pejabat" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "" +"Office programs: wordprocessors (kword, abiword), spreadsheets (kspread, " +"gnumeric), pdf viewers, etc" +msgstr "Pejabat" + +#: ../../share/compssUsers:999 +msgid "Game station" +msgstr "" + +#: ../../share/compssUsers:999 +msgid "Amusement programs: arcade, boards, strategy, etc" +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Multimedia station" +msgstr "Multimedia" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Sound and video playing/editing programs" +msgstr "Bunyi dan" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Internet station" +msgstr "Internet" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "" +"Set of tools to read and send mail and news (pine, mutt, tin..) and to " +"browse the Web" +msgstr "dan dan dan" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Network Computer (client)" +msgstr "Rangkaian" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Clients for different protocols including ssh" +msgstr "protokol" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Configuration" +msgstr "Konfigurasikan" + +#: ../../share/compssUsers:999 +msgid "Tools to ease the configuration of your computer" +msgstr "" + +#: ../../share/compssUsers:999 +msgid "Scientific Workstation" +msgstr "" + +#: ../../share/compssUsers:999 +msgid "Scientific applications such as gnuplot" +msgstr "" + +#: ../../share/compssUsers:999 +msgid "Console Tools" +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Editors, shells, file tools, terminals" +msgstr "Penyunting fail" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "KDE Workstation" +msgstr "KDE" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "" +"The K Desktop Environment, the basic graphical environment with a collection " +"of accompanying tools" +msgstr "Desktop Persekitaran asas" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Gnome Workstation" +msgstr "Gnome" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "" +"A graphical environment with user-friendly set of applications and desktop " +"tools" +msgstr "A pengguna dan" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Other Graphical Desktops" +msgstr "Lain-lain Grafikal" + +#: ../../share/compssUsers:999 +msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc" +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "C and C++ development libraries, programs and include files" +msgstr "C dan C dan" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Documentation" +msgstr "Dokumentasi" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Books and Howto's on Linux and Free Software" +msgstr "dan on dan Bebas" + +#: ../../share/compssUsers:999 +msgid "LSB" +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Linux Standard Base. Third party applications support" +msgstr "Asas" + +#: ../../share/compssUsers:999 +msgid "Web/FTP" +msgstr "" + +#: ../../share/compssUsers:999 +msgid "Apache, Pro-ftpd" +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Mail" +msgstr "Mel" + +#: ../../share/compssUsers:999 +msgid "Postfix mail server" +msgstr "" + +#: ../../share/compssUsers:999 +msgid "Database" +msgstr "" + +#: ../../share/compssUsers:999 +msgid "PostgreSQL or MySQL database server" +msgstr "" + +#: ../../share/compssUsers:999 +msgid "Firewall/Router" +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Internet gateway" +msgstr "Internet" + +#: ../../share/compssUsers:999 +msgid "DNS/NIS " +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Domain Name and Network Information Server" +msgstr "Domain Nama dan Rangkaian Maklumat" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Network Computer server" +msgstr "Rangkaian" + +#: ../../share/compssUsers:999 +msgid "NFS server, SMB server, Proxy server, ssh server" +msgstr "" + +#: ../../share/compssUsers:999 +#, fuzzy +msgid "Set of tools to read and send mail and news and to browse the Web" +msgstr "dan dan dan" + +#, fuzzy +#~ msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*" +#~ msgstr "normal" + +#, fuzzy +#~ msgid "Hostname configuration" +#~ msgstr "Sistem" + +#, fuzzy +#~ msgid "Hostname" +#~ msgstr "Hos" + +#, fuzzy +#~ msgid "Printing system: " +#~ msgstr "Cetakan " + +#, fuzzy +#~ msgid "Insert floppy and press %s" +#~ msgstr "dalam" |