drakx - Mageia Installer and base platform for many utilities

diff options

Diffstat (limited to 'perl-install/share/po/eo.po')

-rw-r--r--

608

1 files changed, 307 insertions, 301 deletions

# Greek translation for drakfloppy. # Copyright (C) 2001 Free Software Foundation, Inc. # Thanos Kyritsis <djart@hellug.gr>, 2001. # msgid "" msgstr "" "Project-Id-Version: drakfloppy 0.43\n" "POT-Creation-Date: 2002-08-21 15:44+0200\n" "PO-Revision-Date: 2001-08-22 22:44+0300\n" "Last-Translator: Thanos Kyritsis <djart@hellug.gr>\n" "Language-Team: Greek <nls@tux.hellug.gr>\n" "MIME-Version: 1.0\n" "Content-Type: text/plain; charset=ISO-8859-7\n" "Content-Transfer-Encoding: 8bit\n" "X-Generator: KBabel 0.8\n" #: ../../Xconfig/card.pm_.c:16 msgid "256 kB" msgstr "256 kb" #: ../../Xconfig/card.pm_.c:17 msgid "512 kB" msgstr "512 kb" #: ../../Xconfig/card.pm_.c:18 msgid "1 MB" msgstr "1 MB" #: ../../Xconfig/card.pm_.c:19 msgid "2 MB" msgstr "2 MB" #: ../../Xconfig/card.pm_.c:20 msgid "4 MB" msgstr "4 MB" #: ../../Xconfig/card.pm_.c:21 msgid "8 MB" msgstr "8 MB" #: ../../Xconfig/card.pm_.c:22 msgid "16 MB" msgstr "16 MB" #: ../../Xconfig/card.pm_.c:23 msgid "32 MB" msgstr "32 MB" #: ../../Xconfig/card.pm_.c:24 msgid "64 MB or more" msgstr "64 MB � ��" #: ../../Xconfig/card.pm_.c:201 msgid "Choose a X server" msgstr "�� X server (�� )" #: ../../Xconfig/card.pm_.c:201 msgid "X server" msgstr "�� X Window" #: ../../Xconfig/card.pm_.c:228 msgid "Multi-head configuration" msgstr "�� " #: ../../Xconfig/card.pm_.c:229 msgid "" "Your system support multiple head configuration.\n" "What do you want to do?" msgstr "" "�� .\n" "�� ;" #: ../../Xconfig/card.pm_.c:284 msgid "Select the memory size of your graphics card" msgstr "�� " #: ../../Xconfig/card.pm_.c:345 msgid "XFree configuration" msgstr "�� XFree" #: ../../Xconfig/card.pm_.c:347 msgid "Which configuration of XFree do you want to have?" msgstr "�� XFree �� ;" #: ../../Xconfig/card.pm_.c:379 msgid "Configure all heads independently" msgstr "�� " #: ../../Xconfig/card.pm_.c:380 msgid "Use Xinerama extension" msgstr "�� Xinerama" #: ../../Xconfig/card.pm_.c:384 #, fuzzy, c-format msgid "Configure only card \"%s\"%s" msgstr "�� \"%s\" (%s)" #: ../../Xconfig/card.pm_.c:398 ../../Xconfig/card.pm_.c:399 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s" msgstr "XFree %s" #: ../../Xconfig/card.pm_.c:409 ../../Xconfig/card.pm_.c:435 #: ../../Xconfig/various.pm_.c:23 #, c-format msgid "XFree %s with 3D hardware acceleration" msgstr "XFree %s �� " #: ../../Xconfig/card.pm_.c:412 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "� �� \n" "�� XFree %s. � �� XFree %s �� " "�� \n" "�� ." #: ../../Xconfig/card.pm_.c:414 ../../Xconfig/card.pm_.c:437 #, c-format msgid "Your card can have 3D hardware acceleration support with XFree %s." msgstr "" "� �� XFree " "%s." #: ../../Xconfig/card.pm_.c:422 ../../Xconfig/card.pm_.c:443 #, c-format msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration" msgstr "XFree %s �� " #: ../../Xconfig/card.pm_.c:425 #, c-format msgid "" "Your card can have 3D hardware acceleration support but only with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n" "Your card is supported by XFree %s which may have a better support in 2D." msgstr "" "� �� \n" "�� XFree %s. ��: �� - �� " "�� !\n" "� �� XFree %s �� " "��\n" "�� ." #: ../../Xconfig/card.pm_.c:428 ../../Xconfig/card.pm_.c:445 #, c-format msgid "" "Your card can have 3D hardware acceleration support with XFree %s,\n" "NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER." msgstr "" "� �� XFree " "%s,\n" "��: �� - �� !" #: ../../Xconfig/card.pm_.c:451 msgid "Xpmac (installation display driver)" msgstr "Xpmac (�� )" #: ../../Xconfig/main.pm_.c:78 ../../Xconfig/main.pm_.c:79 #: ../../Xconfig/monitor.pm_.c:94 ../../any.pm_.c:974 msgid "Custom" msgstr "��" #: ../../Xconfig/main.pm_.c:104 #, fuzzy msgid "Graphic Card" msgstr "�� " #: ../../Xconfig/main.pm_.c:107 ../../Xconfig/monitor.pm_.c:91 msgid "Monitor" msgstr "��" #: ../../Xconfig/main.pm_.c:110 ../../Xconfig/resolution_and_depth.pm_.c:209 msgid "Resolution" msgstr "��" #: ../../Xconfig/main.pm_.c:114 msgid "Test" msgstr "" #: ../../Xconfig/main.pm_.c:118 ../../diskdrake/dav.pm_.c:59 #: ../../diskdrake/interactive.pm_.c:377 ../../diskdrake/removable.pm_.c:25 #: ../../diskdrake/removable_gtk.pm_.c:16 ../../diskdrake/smbnfs_gtk.pm_.c:86 msgid "Options" msgstr "��" #: ../../Xconfig/main.pm_.c:121 ../../Xconfig/resolution_and_depth.pm_.c:268 #: ../../install_gtk.pm_.c:79 ../../install_steps_gtk.pm_.c:281 #: ../../interactive.pm_.c:127 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:351 ../../interactive/http.pm_.c:104 #: ../../interactive/newt.pm_.c:174 ../../interactive/newt.pm_.c:176 #: ../../interactive/stdio.pm_.c:39 ../../interactive/stdio.pm_.c:143 #: ../../interactive/stdio.pm_.c:144 ../../my_gtk.pm_.c:156 #: ../../my_gtk.pm_.c:284 ../../my_gtk.pm_.c:307 #: ../../standalone/drakbackup_.c:3324 ../../standalone/drakbackup_.c:3419 #: ../../standalone/drakbackup_.c:3438 msgid "Ok" msgstr "��" #: ../../Xconfig/main.pm_.c:121 ../../diskdrake/dav.pm_.c:24 #: ../../printerdrake.pm_.c:2933 ../../standalone/logdrake_.c:224 msgid "Quit" msgstr "��" #: ../../Xconfig/main.pm_.c:144 #, c-format msgid "" "Keep the changes?\n" "The current configuration is:\n" "\n" "%s" msgstr "" "�� ;\n" "�� :\n" "\n" "%s" #: ../../Xconfig/monitor.pm_.c:91 msgid "Choose a monitor" msgstr "�� " #: ../../Xconfig/monitor.pm_.c:95 msgid "Plug'n Play" msgstr "" #: ../../Xconfig/monitor.pm_.c:96 ../../mouse.pm_.c:45 msgid "Generic" msgstr "��" #: ../../Xconfig/monitor.pm_.c:97 ../../harddrake/ui.pm_.c:36 #, fuzzy msgid "Vendor" msgstr "�� " #: ../../Xconfig/monitor.pm_.c:107 msgid "Plug'n Play probing failed. Please choose a precise monitor" msgstr "" #: ../../Xconfig/monitor.pm_.c:112 msgid "" "The two critical parameters are the vertical refresh rate, which is the " "rate\n" "at which the whole screen is refreshed, and most importantly the horizontal\n" "sync rate, which is the rate at which scanlines are displayed.\n" "\n" "It is VERY IMPORTANT that you do not specify a monitor type with a sync " "range\n" "that is beyond the capabilities of your monitor: you may damage your " "monitor.\n" " If in doubt, choose a conservative setting." msgstr "" "�� , �� " "��\n" "�� , �� \n" "�� , � �� \n" "�� .\n" "\n" "�� \n" "�� : �� " "��\n" "�� . �� , �� ." #: ../../Xconfig/monitor.pm_.c:119 msgid "Horizontal refresh rate" msgstr "�� " #: ../../Xconfig/monitor.pm_.c:120 msgid "Vertical refresh rate" msgstr "�� " #: ../../Xconfig/resolution_and_depth.pm_.c:12 msgid "256 colors (8 bits)" msgstr "256 �� (8 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:13 msgid "32 thousand colors (15 bits)" msgstr "32 �� (15 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:14 msgid "65 thousand colors (16 bits)" msgstr "65 �� (16 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:15 msgid "16 million colors (24 bits)" msgstr "16 �� (24 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:16 msgid "4 billion colors (32 bits)" msgstr "4 �� (32 bits)" #: ../../Xconfig/resolution_and_depth.pm_.c:129 msgid "Resolutions" msgstr "��" #: ../../Xconfig/resolution_and_depth.pm_.c:254 msgid "Choose the resolution and the color depth" msgstr "�� " #: ../../Xconfig/resolution_and_depth.pm_.c:255 #, c-format msgid "Graphics card: %s" msgstr "�� : %s" #: ../../Xconfig/resolution_and_depth.pm_.c:268 ../../any.pm_.c:1015 #: ../../bootlook.pm_.c:334 ../../diskdrake/smbnfs_gtk.pm_.c:87 #: ../../install_steps_gtk.pm_.c:412 ../../install_steps_gtk.pm_.c:470 #: ../../install_steps_interactive.pm_.c:576 ../../interactive.pm_.c:142 #: ../../interactive.pm_.c:351 ../../interactive/http.pm_.c:105 #: ../../interactive/newt.pm_.c:174 ../../interactive/stdio.pm_.c:39 #: ../../interactive/stdio.pm_.c:143 ../../my_gtk.pm_.c:155 #: ../../my_gtk.pm_.c:159 ../../my_gtk.pm_.c:284 #: ../../network/netconnect.pm_.c:46 ../../printerdrake.pm_.c:1990 #: ../../standalone/drakautoinst_.c:203 ../../standalone/drakbackup_.c:3278 #: ../../standalone/drakbackup_.c:3311 ../../standalone/drakbackup_.c:3337 #: ../../standalone/drakbackup_.c:3364 ../../standalone/drakbackup_.c:3391 #: ../../standalone/drakbackup_.c:3451 ../../standalone/drakbackup_.c:3478 #: ../../standalone/drakbackup_.c:3504 ../../standalone/drakconnect_.c:115 #: ../../standalone/drakconnect_.c:147 ../../standalone/drakconnect_.c:289 #: ../../standalone/drakconnect_.c:537 ../../standalone/drakconnect_.c:679 #: ../../standalone/drakfloppy_.c:234 ../../standalone/drakfloppy_.c:383 #: ../../standalone/drakfont_.c:970 ../../standalone/drakgw_.c:598 #: ../../standalone/logdrake_.c:224 ../../standalone/logdrake_.c:528 #: ../../standalone/tinyfirewall_.c:64 msgid "Cancel" msgstr "��" #: ../../Xconfig/test.pm_.c:26 msgid "Do you want to test the configuration?" msgstr "�� ;" #: ../../Xconfig/test.pm_.c:26 msgid "Test of the configuration" msgstr "�� " #: ../../Xconfig/various.pm_.c:29 #, c-format msgid "Keyboard layout: %s\n" msgstr "�� : %s\n" #: ../../Xconfig/various.pm_.c:30 #, c-format msgid "Mouse type: %s\n" msgstr "�� : %s\n" #: ../../Xconfig/various.pm_.c:31 #, c-format msgid "Mouse device: %s\n" msgstr "�� : %s\n" #: ../../Xconfig/various.pm_.c:32 #, c-format msgid "Monitor: %s\n" msgstr "��: %s\n" #: ../../Xconfig/various.pm_.c:33 #, c-format msgid "Monitor HorizSync: %s\n" msgstr "�� : %s\n" #: ../../Xconfig/various.pm_.c:34 #, c-format msgid "Monitor VertRefresh: %s\n" msgstr "�� : %s\n" #: ../../Xconfig/various.pm_.c:35 #, c-format msgid "Graphics card: %s\n" msgstr "�� : %s\n" #: ../../Xconfig/various.pm_.c:36 #, c-format msgid "Graphics memory: %s kB\n" msgstr "�� : %s kb\n" #: ../../Xconfig/various.pm_.c:38 #, c-format msgid "Color depth: %s\n" msgstr "�� : %s\n" #: ../../Xconfig/various.pm_.c:39 #, c-format msgid "Resolution: %s\n" msgstr "��: %s\n" #: ../../Xconfig/various.pm_.c:41 #, c-format msgid "XFree86 server: %s\n" msgstr "XFree86 server: %s\n" #: ../../Xconfig/various.pm_.c:42 #, c-format msgid "XFree86 driver: %s\n" msgstr "�� XFree86: %s\n" #: ../../Xconfig/various.pm_.c:60 msgid "Graphical interface at startup" msgstr "�� (X) �� " #: ../../Xconfig/various.pm_.c:61 msgid "" "I can setup your computer to automatically start the graphical interface " "(XFree) upon booting.\n" "Would you like XFree to start when you reboot?" msgstr "" "�� \n" "�� (X-Windows).\n" "�� ;" #: ../../Xconfig/various.pm_.c:72 msgid "" "Your graphic card seems to have a TV-OUT connector.\n" "It can be configured to work using frame-buffer.\n" "\n" "For this you have to plug your graphic card to your TV before booting your " "computer.\n" "Then choose the \"TVout\" entry in the bootloader\n" "\n" "Do you have this feature?" msgstr "" #: ../../Xconfig/various.pm_.c:84 #, fuzzy msgid "What norm is your TV using?" msgstr "�� ISDN �� ;" #: ../../any.pm_.c:108 ../../any.pm_.c:133 msgid "First sector of boot partition" msgstr "�� " #: ../../any.pm_.c:108 ../../any.pm_.c:133 ../../any.pm_.c:210 msgid "First sector of drive (MBR)" msgstr "�� (MBR)" #: ../../any.pm_.c:112 msgid "SILO Installation" msgstr "�� SILO" #: ../../any.pm_.c:113 ../../any.pm_.c:126 msgid "Where do you want to install the bootloader?" msgstr "�� ;" #: ../../any.pm_.c:125 msgid "LILO/grub Installation" msgstr "�� LILO/grub" #: ../../any.pm_.c:137 ../../any.pm_.c:151 msgid "SILO" msgstr "SILO" #: ../../any.pm_.c:139 msgid "LILO with text menu" msgstr "LILO �� " #: ../../any.pm_.c:140 ../../any.pm_.c:151 msgid "LILO with graphical menu" msgstr "LILO �� " #: ../../any.pm_.c:143 msgid "Grub" msgstr "Grub" #: ../../any.pm_.c:147 msgid "Boot from DOS/Windows (loadlin)" msgstr "�� DOS/Windows (loadlin)" #: ../../any.pm_.c:149 ../../any.pm_.c:151 msgid "Yaboot" msgstr "Yaboot" #: ../../any.pm_.c:158 ../../any.pm_.c:190 msgid "Bootloader main options" msgstr "�� " #: ../../any.pm_.c:159 ../../any.pm_.c:191 msgid "Bootloader to use" msgstr "Bootloader �� " #: ../../any.pm_.c:161 msgid "Bootloader installation" msgstr "�� " #: ../../any.pm_.c:163 ../../any.pm_.c:193 msgid "Boot device" msgstr "�� " #: ../../any.pm_.c:164 msgid "LBA (doesn't work on old BIOSes)" msgstr "LBA (�� BIOS)" #: ../../any.pm_.c:165 msgid "Compact" msgstr "��" #: ../../any.pm_.c:165 msgid "compact" msgstr "��" #: ../../any.pm_.c:166 ../../any.pm_.c:290 msgid "Video mode" msgstr "�� " #: ../../any.pm_.c:168 msgid "Delay before booting default image" msgstr "�� " #: ../../any.pm_.c:170 ../../any.pm_.c:786 #: ../../diskdrake/smbnfs_gtk.pm_.c:179 #: ../../install_steps_interactive.pm_.c:1111 ../../network/modem.pm_.c:48 #: ../../printerdrake.pm_.c:743 ../../printerdrake.pm_.c:858 #: ../../standalone/drakconnect_.c:624 ../../standalone/drakconnect_.c:649 msgid "Password" msgstr "��" #: ../../any.pm_.c:171 ../../any.pm_.c:787 #: ../../install_steps_interactive.pm_.c:1112 msgid "Password (again)" msgstr "�� (��)" #: ../../any.pm_.c:172 msgid "Restrict command line options" msgstr "�� " #: ../../any.pm_.c:172 msgid "restrict" msgstr "��" #: ../../any.pm_.c:174 msgid "Clean /tmp at each boot" msgstr "�� /tmp �� " #: ../../any.pm_.c:175 #, c-format msgid "Precise RAM size if needed (found %d MB)" msgstr "�� (�� %d MB)" #: ../../any.pm_.c:177 msgid "Enable multi profiles" msgstr "�� profiles" #: ../../any.pm_.c:181 msgid "Give the ram size in MB" msgstr "�� Mb" #: ../../any.pm_.c:183 msgid "" "Option ``Restrict command line options'' is of no use without a password" msgstr "" "� �� ``�� '' �� " "��" #: ../../any.pm_.c:184 ../../any.pm_.c:762 #: ../../diskdrake/interactive.pm_.c:1180 #: ../../install_steps_interactive.pm_.c:1106 msgid "Please try again" msgstr "�� " #: ../../any.pm_.c:184 ../../any.pm_.c:762 #: ../../install_steps_interactive.pm_.c:1106 msgid "The passwords do not match" msgstr "�� " #: ../../any.pm_.c:192 msgid "Init Message" msgstr "�� Init" #: ../../any.pm_.c:194 msgid "Open Firmware Delay" msgstr "�� Firmware" #: ../../any.pm_.c:195 msgid "Kernel Boot Timeout" msgstr "�� " #: ../../any.pm_.c:196 msgid "Enable CD Boot?" msgstr "�� CD;" #: ../../any.pm_.c:197 msgid "Enable OF Boot?" msgstr "�� OF ��;" #: ../../any.pm_.c:198 msgid "Default OS?" msgstr "��' �� ;" #: ../../any.pm_.c:232 msgid "" "You decided to install the bootloader on a partition.\n" "This implies you already have a bootloader on the hard drive you boot (eg: " "System Commander).\n" "\n" "On which drive are you booting?" msgstr "" #: ../../any.pm_.c:247 msgid "" "Here are the entries on your boot menu so far.\n" "You can add some more or change the existing ones." msgstr "" "�� .\n" "�� ." #: ../../any.pm_.c:257 ../../standalone/drakbackup_.c:1483 #: ../../standalone/drakbackup_.c:1596 ../../standalone/drakfont_.c:1011 #: ../../standalone/drakfont_.c:1054 msgid "Add" msgstr "��" #: ../../any.pm_.c:257 ../../any.pm_.c:774 ../../diskdrake/dav.pm_.c:60 #: ../../diskdrake/hd_gtk.pm_.c:153 ../../diskdrake/removable.pm_.c:27 #: ../../diskdrake/smbnfs_gtk.pm_.c:88 ../../interactive/http.pm_.c:153 #: ../../standalone/drakbackup_.c:2696 msgid "Done" msgstr "��" #: ../../any.pm_.c:257 msgid "Modify" msgstr "��" #: ../../any.pm_.c:265 msgid "Which type of entry do you want to add?" msgstr "�� " #: ../../any.pm_.c:266 ../../standalone/drakbackup_.c:1630 msgid "Linux" msgstr "Linux" #: ../../any.pm_.c:266 msgid "Other OS (SunOS...)" msgstr "�� (SunOS...)" #: ../../any.pm_.c:267 msgid "Other OS (MacOS...)" msgstr "�� (MacOS...)" #: ../../any.pm_.c:267 msgid "Other OS (windows...)" msgstr "�� (windows...)" #: ../../any.pm_.c:286 msgid "Image" msgstr "Image" #: ../../any.pm_.c:287 ../../any.pm_.c:298 msgid "Root" msgstr "Root" #: ../../any.pm_.c:288 ../../any.pm_.c:316 msgid "Append" msgstr "Append" #: ../../any.pm_.c:292 msgid "Initrd" msgstr "Initrd" #: ../../any.pm_.c:293 msgid "Read-write" msgstr "Read-write" #: ../../any.pm_.c:300 msgid "Table" msgstr "��" #: ../../any.pm_.c:301 msgid "Unsafe" msgstr "��" #: ../../any.pm_.c:308 ../../any.pm_.c:313 ../../any.pm_.c:315 msgid "Label" msgstr "��" #: ../../any.pm_.c:310 ../../any.pm_.c:320 ../../harddrake/v4l.pm_.c:201 msgid "Default" msgstr "�� ' ��" #: ../../any.pm_.c:317 msgid "Initrd-size" msgstr "Initrd-��" #: ../../any.pm_.c:319 msgid "NoVideo" msgstr "��Video" #: ../../any.pm_.c:327 msgid "Remove entry" msgstr "�� " #: ../../any.pm_.c:330 msgid "Empty label not allowed" msgstr "�� " #: ../../any.pm_.c:331 msgid "You must specify a kernel image" msgstr "" #: ../../any.pm_.c:331 #, fuzzy msgid "You must specify a root partition" msgstr "�� swap" #: ../../any.pm_.c:332 msgid "This label is already used" msgstr "�� " #: ../../any.pm_.c:656 #, c-format msgid "Found %s %s interfaces" msgstr "�� %s %s ��" #: ../../any.pm_.c:657 msgid "Do you have another one?" msgstr "�� ;" #: ../../any.pm_.c:658 #, c-format msgid "Do you have any %s interfaces?" msgstr "�� %s;" #: ../../any.pm_.c:660 ../../any.pm_.c:821 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:283 msgid "No" msgstr "��" #: ../../any.pm_.c:660 ../../any.pm_.c:820 ../../interactive.pm_.c:132 #: ../../my_gtk.pm_.c:283 msgid "Yes" msgstr "��" #: ../../any.pm_.c:661 msgid "See hardware info" msgstr "�� " #. -PO: the first %s is the card type (scsi, network, sound,...) #. -PO: the second is the vendor+model name #: ../../any.pm_.c:677 #, c-format msgid "Installing driver for %s card %s" msgstr "�� %s �� %s" #: ../../any.pm_.c:678 #, c-format msgid "(module %s)" msgstr "(module %s)" #: ../../any.pm_.c:689 #, c-format msgid "" "You may now provide its options to module %s.\n" "Note that any address should be entered with the prefix 0x like '0x123'" msgstr "" #: ../../any.pm_.c:695 #, c-format msgid "" "You may now provide options to module %s.\n" "Options are in format ``name=value name2=value2 ...''.\n" "For instance, ``io=0x300 irq=7''" msgstr "" "�� %s.\n" "�� ``��=�� 2=��2 ...''.\n" "�� , ``io=0x300 irq=7''" #: ../../any.pm_.c:697 msgid "Module options:" msgstr "�� " #. -PO: the %s is the driver type (scsi, network, sound,...) #: ../../any.pm_.c:709 #, c-format msgid "Which %s driver should I try?" msgstr "�� %s �� ;" #: ../../any.pm_.c:718 #, c-format msgid "" "In some cases, the %s driver needs to have extra information to work\n" "properly, although it normally works fine without. Would you like to " "specify\n" "extra options for it or allow the driver to probe your machine for the\n" "information it needs? Occasionally, probing will hang a computer, but it " "should\n" "not cause any damage." msgstr "" "�� , � %s �� \n" "�� , ��' �� .\n" "�� \n" "�� ; � �� \n" "�� , �� ." #: ../../any.pm_.c:722 msgid "Autoprobe" msgstr "�� " #: ../../any.pm_.c:722 msgid "Specify options" msgstr "�� " #: ../../any.pm_.c:734 #, c-format msgid "" "Loading module %s failed.\n" "Do you want to try again with other parameters?" msgstr "" "� �� %s ��.\n" "�� ;" #: ../../any.pm_.c:750 msgid "access to X programs" msgstr "" #: ../../any.pm_.c:751 msgid "access to rpm tools" msgstr "" #: ../../any.pm_.c:752 msgid "allow \"su\"" msgstr "" #: ../../any.pm_.c:753 msgid "access to administrative files" msgstr "" #: ../../any.pm_.c:758 #, c-format msgid "(already added %s)" msgstr "(�� %s �� )" #: ../../any.pm_.c:763 msgid "This password is too simple" msgstr "�� " #: ../../any.pm_.c:764 msgid "Please give a user name" msgstr "�� " #: ../../any.pm_.c:765 msgid "" "The user name must contain only lower cased letters, numbers, `-' and `_'" msgstr "" "�� , ��, `-' �� `_'" #: ../../any.pm_.c:766 #, fuzzy msgid "The user name is too long" msgstr "�� " #: ../../any.pm_.c:767 msgid "This user name is already added" msgstr "�� " #: ../../any.pm_.c:771 msgid "Add user" msgstr "�� " #: ../../any.pm_.c:772 #, c-format msgid "" "Enter a user\n" "%s" msgstr "" "�� \n" "%s" #: ../../any.pm_.c:773 msgid "Accept user" msgstr "�� " #: ../../any.pm_.c:784 msgid "Real name" msgstr "�� " #: ../../any.pm_.c:785 ../../printerdrake.pm_.c:742 #: ../../printerdrake.pm_.c:857 msgid "User name" msgstr "�� " #: ../../any.pm_.c:788 msgid "Shell" msgstr "�� (shell)" #: ../../any.pm_.c:790 msgid "Icon" msgstr "��" #: ../../any.pm_.c:817 msgid "Autologin" msgstr "�� (Autologin)" #: ../../any.pm_.c:818 #, fuzzy msgid "" "I can set up your computer to automatically log on one user.\n" "Do you want to use this feature?" msgstr "" "�� \n" "�� .\n" "�� , �� ." #: ../../any.pm_.c:822 msgid "Choose the default user:" msgstr "�� ' �� :" #: ../../any.pm_.c:823 msgid "Choose the window manager to run:" msgstr "�� " #: ../../any.pm_.c:838 #, fuzzy msgid "Please choose a language to use." msgstr "�� ." #: ../../any.pm_.c:840 msgid "" "Mandrake Linux can support multiple languages. Select\n" "the languages you would like to install. They will be available\n" "when your installation is complete and you restart your system." msgstr "" "�� " "�� " #: ../../any.pm_.c:854 ../../install_steps_interactive.pm_.c:708 #: ../../standalone/drakxtv_.c:73 msgid "All" msgstr "��" #: ../../any.pm_.c:974 #, fuzzy msgid "Allow all users" msgstr "�� " #: ../../any.pm_.c:974 #, fuzzy msgid "No sharing" msgstr "�� CUPS" #: ../../any.pm_.c:984 ../../standalone.pm_.c:57 #, fuzzy, c-format msgid "The package %s needs to be installed. Do you want to install it?" msgstr "" "�� \n" "�� ;" #: ../../any.pm_.c:987 msgid "" "You can export using NFS or Samba. Please select which you'd like to use." msgstr "" #: ../../any.pm_.c:995 ../../standalone.pm_.c:61 #, c-format msgid "Mandatory package %s is missing" msgstr "" #: ../../any.pm_.c:1001 msgid "" "Would you like to allow users to share some of their directories?\n" "Allowing this will permit users to simply click on \"Share\" in konqueror " "and nautilus.\n" "\n" "\"Custom\" permit a per-user granularity.\n" msgstr "" #: ../../any.pm_.c:1015 msgid "Launch userdrake" msgstr "" #: ../../any.pm_.c:1017 msgid "" "The per-user sharing uses the group \"fileshare\". \n" "You can use userdrake to add a user in this group." msgstr "" #: ../../any.pm_.c:1068 msgid "Welcome To Crackers" msgstr "�� Crackers" #: ../../any.pm_.c:1069 msgid "Poor" msgstr "��" #: ../../any.pm_.c:1070 ../../mouse.pm_.c:31 msgid "Standard" msgstr "��" #: ../../any.pm_.c:1071 msgid "High" msgstr "��" #: ../../any.pm_.c:1072 #, fuzzy msgid "Higher" msgstr "��" #: ../../any.pm_.c:1073 msgid "Paranoid" msgstr "��" #: ../../any.pm_.c:1076 msgid "" "This level is to be used with care. It makes your system more easy to use,\n" "but very sensitive: it must not be used for a machine connected to others\n" "or to the Internet. There is no password access." msgstr "" "�� . �� \n" "�� , �� . �� " "��\n" "�� Internet � LAN. �� ." #: ../../any.pm_.c:1079 msgid "" "Password are now enabled, but use as a networked computer is still not " "recommended." msgstr "" "�� , �� \n" "�� ." #: ../../any.pm_.c:1080 #, fuzzy msgid "" "This is the standard security recommended for a computer that will be used " "to connect to the Internet as a client." msgstr "" "�� \n" "�� Internet. �� ." #: ../../any.pm_.c:1081 msgid "" "There are already some restrictions, and more automatic checks are run every " "night." msgstr "" #: ../../any.pm_.c:1082 #, fuzzy msgid "" "With this security level, the use of this system as a server becomes " "possible.\n" "The security is now high enough to use the system as a server which can " "accept\n" "connections from many clients. Note: if your machine is only a client on the " "Internet, you should choose a lower level." msgstr "" "�� \n" "Internet �� . � �� \n" "�� ." #: ../../any.pm_.c:1085 #, fuzzy msgid "" "This is similar to the previous level, but the system is entirely closed and " "security features are at their maximum." msgstr "" "�� 4, �� . �� \n" "�� ." #: ../../any.pm_.c:1091 #, fuzzy msgid "DrakSec Basic Options" msgstr "��" #: ../../any.pm_.c:1092 #, fuzzy msgid "Please choose the desired security level" msgstr "�� " #: ../../any.pm_.c:1095 #, fuzzy msgid "Security level" msgstr "�� " #: ../../any.pm_.c:1097 #, fuzzy msgid "Use libsafe for servers" msgstr "�� X server" #: ../../any.pm_.c:1098 msgid "" "A library which defends against buffer overflow and format string attacks." msgstr "" #: ../../any.pm_.c:1099 msgid "Security Administrator (login or email)" msgstr "" #: ../../any.pm_.c:1189 msgid "" "Here you can choose the key or key combination that will \n" "allow switching between the different keyboard layouts\n" "(eg: latin and non latin)" msgstr "" # NOTE: this message will be displayed at boot time; that is # only the ascii charset will be available on most machines # so use only 7bit for this message (and do transliteration or # leave it in English, as it is the best for your language) # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #: ../../bootloader.pm_.c:375 #, c-format msgid "" "Welcome to %s the operating system chooser!\n" "\n" "Choose an operating system in the list above or\n" "wait %d seconds for default boot.\n" "\n" msgstr "" "KALOS HRTHATE STON EPILOGEA LEITOURGIKOU SYSTHMATOS %s!\n" "\n" "EPILEXTE LEITORGIKO SYSTHMA APO TON PARAPANO KATALOGO \n" "H PERIMENETE %d DEUTEROLEPTA GIA THN AYTOMATH EPILOGH.\n" "\n" # NOTE: this message will be displayed by grub at boot time; that is # using the BIOS font; that means cp437 charset on 99.99% of PC computers # out there. It is the nsuggested that for non latin languages an ascii # transliteration be used; or maybe the english text be used; as it is best # # The lines must fit on screen, aka length < 80 # #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:935 msgid "Welcome to GRUB the operating system chooser!" msgstr "Welcome to GRUB the operating system chooser!" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:938 #, c-format msgid "Use the %c and %c keys for selecting which entry is highlighted." msgstr "Use the %c and %c keys for selecting which entry is highlighted." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:941 msgid "Press enter to boot the selected OS, 'e' to edit the" msgstr "Press enter to boot the selected OS, 'e' to edit the" #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:944 msgid "commands before booting, or 'c' for a command-line." msgstr "commands before booting, or 'c' for a command-line." #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit) #. -PO: and keep them smaller than 79 chars long #: ../../bootloader.pm_.c:947 #, c-format msgid "The highlighted entry will be booted automatically in %d seconds." msgstr "The highlighted entry will be booted automatically in %d seconds." #: ../../bootloader.pm_.c:951 msgid "not enough room in /boot" msgstr "�� /boot" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #. -PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language #: ../../bootloader.pm_.c:1051 msgid "Desktop" msgstr "Desktop" #. -PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows #: ../../bootloader.pm_.c:1053 msgid "Start Menu" msgstr "Start Menu" #: ../../bootloader.pm_.c:1072 #, fuzzy, c-format msgid "You can't install the bootloader on a %s partition\n" msgstr "�� ;" #: ../../bootlook.pm_.c:45 msgid "no help implemented yet.\n" msgstr "�� .\n" #: ../../bootlook.pm_.c:61 msgid "Boot Style Configuration" msgstr "Boot �� " #: ../../bootlook.pm_.c:78 ../../harddrake/ui.pm_.c:59 #: ../../harddrake/ui.pm_.c:60 ../../standalone/drakfloppy_.c:81 #: ../../standalone/logdrake_.c:101 msgid "/_File" msgstr "/_��" #: ../../bootlook.pm_.c:79 ../../standalone/drakfloppy_.c:82 #: ../../standalone/logdrake_.c:107 msgid "/File/_Quit" msgstr "/��/�_��" #: ../../bootlook.pm_.c:79 ../../harddrake/ui.pm_.c:60 #: ../../standalone/drakfloppy_.c:82 ../../standalone/logdrake_.c:107 msgid "<control>Q" msgstr "<control>Q" #: ../../bootlook.pm_.c:90 msgid "NewStyle Categorizing Monitor" msgstr "NewStyle Categorizing ��" #: ../../bootlook.pm_.c:91 msgid "NewStyle Monitor" msgstr "NewStyle ��" #: ../../bootlook.pm_.c:92 msgid "Traditional Monitor" msgstr "�� " #: ../../bootlook.pm_.c:93 msgid "Traditional Gtk+ Monitor" msgstr "�� Gtk+ ��" #: ../../bootlook.pm_.c:94 msgid "Launch Aurora at boot time" msgstr "�� Aurora �� " #: ../../bootlook.pm_.c:97 msgid "Lilo/grub mode" msgstr "�� Lilo/grub" #: ../../bootlook.pm_.c:97 msgid "Yaboot mode" msgstr "�� Yaboot" #: ../../bootlook.pm_.c:143 #, fuzzy msgid "Install themes" msgstr "�� " #: ../../bootlook.pm_.c:144 msgid "Display theme under console" msgstr "" #: ../../bootlook.pm_.c:166 msgid "Can't create Bootsplash preview" msgstr "" #: ../../bootlook.pm_.c:166 ../../bootlook.pm_.c:184 ../../bootlook.pm_.c:187 #: ../../bootlook.pm_.c:190 ../../bootlook.pm_.c:220 ../../bootlook.pm_.c:222 #: ../../bootlook.pm_.c:232 ../../bootlook.pm_.c:241 ../../bootlook.pm_.c:248 #: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:336 #: ../../diskdrake/interactive.pm_.c:351 ../../diskdrake/interactive.pm_.c:464 #: ../../diskdrake/interactive.pm_.c:469 ../../diskdrake/smbnfs_gtk.pm_.c:45 #: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67 #: ../../install_steps_interactive.pm_.c:365 ../../interactive/http.pm_.c:119 #: ../../interactive/http.pm_.c:120 ../../standalone/diskdrake_.c:80 msgid "Error" msgstr "��" #: ../../bootlook.pm_.c:183 #, c-format msgid "Backup %s to %s.old" msgstr "" #: ../../bootlook.pm_.c:184 msgid "unable to backup lilo message" msgstr "" #: ../../bootlook.pm_.c:186 #, c-format msgid "Copy %s to %s" msgstr "" #: ../../bootlook.pm_.c:187 msgid "can't change lilo message" msgstr "" #: ../../bootlook.pm_.c:190 msgid "Lilo message not found" msgstr "" #: ../../bootlook.pm_.c:220 msgid "Can't write /etc/sysconfig/bootsplash." msgstr "" #: ../../bootlook.pm_.c:220 #, fuzzy, c-format msgid "Write %s" msgstr "XFree %s" #: ../../bootlook.pm_.c:222 msgid "" "Can't write /etc/sysconfig/bootsplash\n" "File not found." msgstr "" #: ../../bootlook.pm_.c:233 #, c-format msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s." msgstr "" #: ../../bootlook.pm_.c:236 #, c-format msgid "Make initrd 'mkinird -f /boot/initrd-%s.img %s'." msgstr "" #: ../../bootlook.pm_.c:242 msgid "" "Can't relaunch LiLo!\n" "Launch \"lilo\" as root in command line to complete LiLo theme installation." msgstr "" #: ../../bootlook.pm_.c:246 msgid "Relaunch 'lilo'" msgstr "" #: ../../bootlook.pm_.c:248 #, fuzzy msgid "Notice" msgstr "��Video" #: ../../bootlook.pm_.c:249 msgid "LiLo and Bootsplash themes installation successfull" msgstr "" #: ../../bootlook.pm_.c:249 #, fuzzy msgid "Theme installation failed!" msgstr "�� " #: ../../bootlook.pm_.c:258 #, c-format msgid "" "You are currently using %s as your boot manager.\n" "Click on Configure to launch the setup wizard." msgstr "" "�� %s �� Boot Manager.\n" "�� ." #: ../../bootlook.pm_.c:260 ../../standalone/drakbackup_.c:2352 #: ../../standalone/drakbackup_.c:2362 ../../standalone/drakbackup_.c:2372 #: ../../standalone/drakbackup_.c:2380 ../../standalone/drakgw_.c:592 #: ../../standalone/tinyfirewall_.c:58 msgid "Configure" msgstr "��" #: ../../bootlook.pm_.c:267 #, fuzzy msgid "Splash selection" msgstr "�� " #: ../../bootlook.pm_.c:270 msgid "Themes" msgstr "" #: ../../bootlook.pm_.c:272 msgid "" "\n" "Select a theme for\n" "lilo and bootsplash,\n" "you can choose\n" "them separatly" msgstr "" #: ../../bootlook.pm_.c:275 msgid "Lilo screen" msgstr "" #: ../../bootlook.pm_.c:279 msgid "Bootsplash" msgstr "" #: ../../bootlook.pm_.c:314 msgid "System mode" msgstr "�� " #: ../../bootlook.pm_.c:316 msgid "Launch the graphical environment when your system starts" msgstr "�� X-Window �� " #: ../../bootlook.pm_.c:321 msgid "No, I don't want autologin" msgstr "��, �� login" #: ../../bootlook.pm_.c:323 msgid "Yes, I want autologin with this (user, desktop)" msgstr "��, �� login �� (user, desktop)" #: ../../bootlook.pm_.c:333 ../../network/netconnect.pm_.c:101 #: ../../standalone/drakTermServ_.c:173 ../../standalone/drakTermServ_.c:300 #: ../../standalone/drakTermServ_.c:405 ../../standalone/drakbackup_.c:3513 #: ../../standalone/drakbackup_.c:4290 ../../standalone/drakconnect_.c:108 #: ../../standalone/drakconnect_.c:140 ../../standalone/drakconnect_.c:296 #: ../../standalone/drakconnect_.c:435 ../../standalone/drakconnect_.c:521 #: ../../standalone/drakconnect_.c:564 ../../standalone/drakconnect_.c:667 #: ../../standalone/drakfloppy_.c:376 ../../standalone/drakfont_.c:612 #: ../../standalone/drakfont_.c:799 ../../standalone/drakfont_.c:876 #: ../../standalone/drakfont_.c:963 ../../standalone/logdrake_.c:521 msgid "OK" msgstr "��" #: ../../bootlook.pm_.c:403 #, c-format msgid "can not open /etc/inittab for reading: %s" msgstr "�� /etc/inittab �� : %s" #: ../../common.pm_.c:94 msgid "GB" msgstr "GB" #: ../../common.pm_.c:94 msgid "KB" msgstr "KB" #: ../../common.pm_.c:94 msgid "MB" msgstr "MB" #: ../../common.pm_.c:102 msgid "TB" msgstr "TB" #: ../../common.pm_.c:110 #, c-format msgid "%d minutes" msgstr "%d ��" #: ../../common.pm_.c:112 msgid "1 minute" msgstr "1 ��" #: ../../common.pm_.c:114 #, c-format msgid "%d seconds" msgstr "%d ��" #: ../../common.pm_.c:159 #, fuzzy msgid "Can't make screenshots before partitioning" msgstr "�� " #: ../../common.pm_.c:166 #, fuzzy, c-format msgid "Screenshots will be available after install in %s" msgstr "" "�� " "�� " #: ../../crypto.pm_.c:14 ../../crypto.pm_.c:28 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:113 #, fuzzy msgid "France" msgstr "��" #: ../../crypto.pm_.c:15 msgid "Costa Rica" msgstr "" #: ../../crypto.pm_.c:16 ../../crypto.pm_.c:29 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:116 #, fuzzy msgid "Belgium" msgstr "��" #: ../../crypto.pm_.c:17 ../../crypto.pm_.c:30 msgid "Czech Republic" msgstr "" #: ../../crypto.pm_.c:18 ../../crypto.pm_.c:31 #, fuzzy msgid "Germany" msgstr "��" #: ../../crypto.pm_.c:19 ../../crypto.pm_.c:32 #, fuzzy msgid "Greece" msgstr "��" #: ../../crypto.pm_.c:20 ../../crypto.pm_.c:33 #, fuzzy msgid "Norway" msgstr "��" #: ../../crypto.pm_.c:21 ../../crypto.pm_.c:34 #, fuzzy msgid "Sweden" msgstr "��" #: ../../crypto.pm_.c:22 ../../crypto.pm_.c:36 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:114 msgid "Netherlands" msgstr "" #: ../../crypto.pm_.c:23 ../../crypto.pm_.c:37 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:115 ../../standalone/drakxtv_.c:68 #, fuzzy msgid "Italy" msgstr "��" #: ../../crypto.pm_.c:24 ../../crypto.pm_.c:38 #, fuzzy msgid "Austria" msgstr "��" #: ../../crypto.pm_.c:35 ../../crypto.pm_.c:61 ../../network/tools.pm_.c:104 #: ../../network/tools.pm_.c:117 msgid "United States" msgstr "" #: ../../detect_devices.pm_.c:599 ../../detect_devices.pm_.c:641 #: ../../detect_devices.pm_.c:803 msgid "Unknown Model" msgstr "" #: ../../diskdrake/dav.pm_.c:23 #, fuzzy msgid "New" msgstr "��" #: ../../diskdrake/dav.pm_.c:57 msgid "Server" msgstr "��" #: ../../diskdrake/dav.pm_.c:58 ../../diskdrake/interactive.pm_.c:375 #: ../../diskdrake/interactive.pm_.c:558 ../../diskdrake/interactive.pm_.c:585 #: ../../diskdrake/removable.pm_.c:24 ../../diskdrake/removable_gtk.pm_.c:15 #: ../../diskdrake/smbnfs_gtk.pm_.c:85 msgid "Mount point" msgstr "�� " #: ../../diskdrake/dav.pm_.c:68 #, fuzzy msgid "Please enter the WebDAV server URL" msgstr "�� " #: ../../diskdrake/dav.pm_.c:71 #, fuzzy msgid "The URL must begin with http:// or https://" msgstr "�� URL �� 'http:'" #: ../../diskdrake/dav.pm_.c:92 #, fuzzy msgid "Server: " msgstr "��" #: ../../diskdrake/dav.pm_.c:93 ../../diskdrake/interactive.pm_.c:435 #: ../../diskdrake/interactive.pm_.c:1079 #: ../../diskdrake/interactive.pm_.c:1153 msgid "Mount point: " msgstr "�� : " #: ../../diskdrake/dav.pm_.c:94 ../../diskdrake/interactive.pm_.c:1159 #, c-format msgid "Options: %s" msgstr "��: %s" #: ../../diskdrake/hd_gtk.pm_.c:94 msgid "Please make a backup of your data first" msgstr "�� " #: ../../diskdrake/hd_gtk.pm_.c:94 ../../diskdrake/interactive.pm_.c:924 #: ../../diskdrake/interactive.pm_.c:933 ../../diskdrake/interactive.pm_.c:999 msgid "Read carefully!" msgstr "�� !" #: ../../diskdrake/hd_gtk.pm_.c:97 msgid "" "If you plan to use aboot, be carefull to leave a free space (2048 sectors is " "enough)\n" "at the beginning of the disk" msgstr "" "�� aboot, �� " "2048 �� )\n" "�� " #: ../../diskdrake/hd_gtk.pm_.c:151 msgid "Wizard" msgstr "��" #: ../../diskdrake/hd_gtk.pm_.c:184 ../../diskdrake/removable_gtk.pm_.c:24 msgid "Choose action" msgstr "�� " #: ../../diskdrake/hd_gtk.pm_.c:188 msgid "" "You have one big FAT partition\n" "(generally used by MicroSoft Dos/Windows).\n" "I suggest you first resize that partition\n" "(click on it, then click on \"Resize\")" msgstr "" "�� FAT ��\n" "(�� Dos � Windows).\n" "�� \n" "(�� , �� \"�� \")" #: ../../diskdrake/hd_gtk.pm_.c:191 msgid "Please click on a partition" msgstr "�� " #: ../../diskdrake/hd_gtk.pm_.c:205 ../../diskdrake/smbnfs_gtk.pm_.c:69 #: ../../install_steps_gtk.pm_.c:471 msgid "Details" msgstr "��" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Ext2" msgstr "Ext2" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "FAT" msgstr "FAT" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "HFS" msgstr "HFS" #: ../../diskdrake/hd_gtk.pm_.c:323 #, fuzzy msgid "Journalised FS" msgstr "�� " #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "SunOS" msgstr "SunOS" #: ../../diskdrake/hd_gtk.pm_.c:323 msgid "Swap" msgstr "Swap" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../diskdrake/interactive.pm_.c:1095 msgid "Empty" msgstr "��" #: ../../diskdrake/hd_gtk.pm_.c:324 ../../install_steps_gtk.pm_.c:331 #: ../../install_steps_gtk.pm_.c:389 ../../mouse.pm_.c:162 #: ../../services.pm_.c:157 ../../standalone/drakbackup_.c:1679 msgid "Other" msgstr "��" #: ../../diskdrake/hd_gtk.pm_.c:328 msgid "Filesystem types:" msgstr "�� :" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:397 msgid "Create" msgstr "��" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/interactive.pm_.c:376 #: ../../diskdrake/interactive.pm_.c:521 ../../diskdrake/removable.pm_.c:26 #: ../../diskdrake/removable.pm_.c:49 ../../diskdrake/removable_gtk.pm_.c:17 msgid "Type" msgstr "��" #: ../../diskdrake/hd_gtk.pm_.c:345 ../../diskdrake/hd_gtk.pm_.c:347 #, c-format msgid "Use ``%s'' instead" msgstr "�� ``%s'' �� " #: ../../diskdrake/hd_gtk.pm_.c:347 ../../diskdrake/interactive.pm_.c:385 msgid "Delete" msgstr "��" #: ../../diskdrake/hd_gtk.pm_.c:351 msgid "Use ``Unmount'' first" msgstr "�� ``��''" #: ../../diskdrake/hd_gtk.pm_.c:352 ../../diskdrake/interactive.pm_.c:513 #, c-format msgid "" "After changing type of partition %s, all data on this partition will be lost" msgstr "" "�� %s, �� " "�� " #: ../../diskdrake/interactive.pm_.c:173 #, fuzzy msgid "Choose a partition" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:173 #, fuzzy msgid "Choose another partition" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:198 #, fuzzy msgid "Exit" msgstr "Ext2" #: ../../diskdrake/interactive.pm_.c:220 msgid "Toggle to expert mode" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:220 msgid "Toggle to normal mode" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:220 msgid "Undo" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:239 msgid "Continue anyway?" msgstr "�� ;" #: ../../diskdrake/interactive.pm_.c:244 msgid "Quit without saving" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:244 msgid "Quit without writing the partition table?" msgstr "�� ;" #: ../../diskdrake/interactive.pm_.c:249 #, fuzzy msgid "Do you want to save /etc/fstab modifications" msgstr "�� ;" #: ../../diskdrake/interactive.pm_.c:261 msgid "Auto allocate" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:261 msgid "Clear all" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:261 #: ../../install_steps_interactive.pm_.c:214 msgid "More" msgstr "��" #: ../../diskdrake/interactive.pm_.c:264 #, fuzzy msgid "Hard drive information" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:294 msgid "All primary partitions are used" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:295 msgid "I can't add any more partition" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:296 msgid "" "To have more partitions, please delete one to be able to create an extended " "partition" msgstr "" "�� , �� " "�� " #: ../../diskdrake/interactive.pm_.c:306 #, fuzzy msgid "Save partition table" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:307 #, fuzzy msgid "Restore partition table" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:308 msgid "Rescue partition table" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:310 #, fuzzy msgid "Reload partition table" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:315 #, fuzzy msgid "Removable media automounting" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:324 ../../diskdrake/interactive.pm_.c:344 msgid "Select file" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:331 msgid "" "The backup partition table has not the same size\n" "Still continue?" msgstr "" "� �� \n" "�� ;" #: ../../diskdrake/interactive.pm_.c:345 msgid "Warning" msgstr "��" #: ../../diskdrake/interactive.pm_.c:346 msgid "" "Insert a floppy in drive\n" "All data on this floppy will be lost" msgstr "" "�� \n" "�� " #: ../../diskdrake/interactive.pm_.c:357 msgid "Trying to rescue partition table" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:363 #, fuzzy msgid "Detailed information" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:378 ../../diskdrake/interactive.pm_.c:652 msgid "Resize" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:379 ../../diskdrake/interactive.pm_.c:705 msgid "Move" msgstr "��" #: ../../diskdrake/interactive.pm_.c:380 msgid "Format" msgstr "��" #: ../../diskdrake/interactive.pm_.c:381 ../../diskdrake/smbnfs_gtk.pm_.c:82 msgid "Mount" msgstr "��" #: ../../diskdrake/interactive.pm_.c:382 msgid "Add to RAID" msgstr "�� RAID" #: ../../diskdrake/interactive.pm_.c:383 msgid "Add to LVM" msgstr "�� LVM" #: ../../diskdrake/interactive.pm_.c:384 ../../diskdrake/smbnfs_gtk.pm_.c:81 msgid "Unmount" msgstr "��" #: ../../diskdrake/interactive.pm_.c:386 msgid "Remove from RAID" msgstr "�� RAID" #: ../../diskdrake/interactive.pm_.c:387 msgid "Remove from LVM" msgstr "�� LVM" #: ../../diskdrake/interactive.pm_.c:388 msgid "Modify RAID" msgstr "�� RAID" #: ../../diskdrake/interactive.pm_.c:389 msgid "Use for loopback" msgstr "�� loopback" #: ../../diskdrake/interactive.pm_.c:428 msgid "Create a new partition" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:431 msgid "Start sector: " msgstr "�� : " #: ../../diskdrake/interactive.pm_.c:433 ../../diskdrake/interactive.pm_.c:805 msgid "Size in MB: " msgstr "�� MB" #: ../../diskdrake/interactive.pm_.c:434 ../../diskdrake/interactive.pm_.c:806 msgid "Filesystem type: " msgstr "�� : " #: ../../diskdrake/interactive.pm_.c:439 msgid "Preference: " msgstr "��: " #: ../../diskdrake/interactive.pm_.c:464 msgid "" "You can't create a new partition\n" "(since you reached the maximal number of primary partitions).\n" "First remove a primary partition and create an extended partition." msgstr "" #: ../../diskdrake/interactive.pm_.c:494 #, fuzzy msgid "Remove the loopback file?" msgstr "�� loopback %s" #: ../../diskdrake/interactive.pm_.c:519 msgid "Change partition type" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:520 ../../diskdrake/removable.pm_.c:48 msgid "Which filesystem do you want?" msgstr "�� ;" #: ../../diskdrake/interactive.pm_.c:526 msgid "Switching from ext2 to ext3" msgstr "�� ext2 �� ext3" #: ../../diskdrake/interactive.pm_.c:556 #, c-format msgid "Where do you want to mount loopback file %s?" msgstr "�� loopback %s;" #: ../../diskdrake/interactive.pm_.c:557 #, c-format msgid "Where do you want to mount device %s?" msgstr "�� %s;" #: ../../diskdrake/interactive.pm_.c:563 msgid "" "Can't unset mount point as this partition is used for loop back.\n" "Remove the loopback first" msgstr "" "�� " "��\n" "�� loopback. �� loopback" #: ../../diskdrake/interactive.pm_.c:584 #, fuzzy, c-format msgid "Where do you want to mount %s?" msgstr "�� %s;" #: ../../diskdrake/interactive.pm_.c:608 msgid "Computing FAT filesystem bounds" msgstr "�� fat filesystem bounds" #: ../../diskdrake/interactive.pm_.c:608 ../../diskdrake/interactive.pm_.c:667 #: ../../install_interactive.pm_.c:131 msgid "Resizing" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:640 msgid "This partition is not resizeable" msgstr "�� ' �� ." #: ../../diskdrake/interactive.pm_.c:645 msgid "All data on this partition should be backed-up" msgstr "" "�� " #: ../../diskdrake/interactive.pm_.c:647 #, c-format msgid "After resizing partition %s, all data on this partition will be lost" msgstr "" "�� %s, �� " "�� " #: ../../diskdrake/interactive.pm_.c:652 msgid "Choose the new size" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:653 #, fuzzy msgid "New size in MB: " msgstr "�� MB" #: ../../diskdrake/interactive.pm_.c:706 msgid "Which disk do you want to move it to?" msgstr "�� ;" #: ../../diskdrake/interactive.pm_.c:707 msgid "Sector" msgstr "��" #: ../../diskdrake/interactive.pm_.c:708 msgid "Which sector do you want to move it to?" msgstr "�� ;" #: ../../diskdrake/interactive.pm_.c:711 msgid "Moving" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:711 msgid "Moving partition..." msgstr "�� ..." #: ../../diskdrake/interactive.pm_.c:728 msgid "Choose an existing RAID to add to" msgstr "�� RAID �� " #: ../../diskdrake/interactive.pm_.c:729 ../../diskdrake/interactive.pm_.c:746 msgid "new" msgstr "��" #: ../../diskdrake/interactive.pm_.c:744 msgid "Choose an existing LVM to add to" msgstr "�� LVM �� " #: ../../diskdrake/interactive.pm_.c:749 msgid "LVM name?" msgstr "�� LVM;" #: ../../diskdrake/interactive.pm_.c:790 msgid "This partition can't be used for loopback" msgstr "�� loopback" #: ../../diskdrake/interactive.pm_.c:803 msgid "Loopback" msgstr "Loopback" #: ../../diskdrake/interactive.pm_.c:804 msgid "Loopback file name: " msgstr "�� loopback: " #: ../../diskdrake/interactive.pm_.c:809 #, fuzzy msgid "Give a file name" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:812 msgid "File already used by another loopback, choose another one" msgstr "�� , �� " #: ../../diskdrake/interactive.pm_.c:813 msgid "File already exists. Use it?" msgstr "�� . �� ;" #: ../../diskdrake/interactive.pm_.c:836 #, fuzzy msgid "Mount options" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:843 msgid "Various" msgstr "" #: ../../diskdrake/interactive.pm_.c:907 ../../standalone/drakfloppy_.c:103 msgid "device" msgstr "��" #: ../../diskdrake/interactive.pm_.c:908 msgid "level" msgstr "��" #: ../../diskdrake/interactive.pm_.c:909 msgid "chunk size" msgstr "�� chunk" #: ../../diskdrake/interactive.pm_.c:924 msgid "Be careful: this operation is dangerous." msgstr "��: �� ." #: ../../diskdrake/interactive.pm_.c:939 msgid "What type of partitioning?" msgstr "�� partitioning;" #: ../../diskdrake/interactive.pm_.c:955 #, fuzzy, c-format msgid "The package %s is needed. Install it?" msgstr "" "�� \n" "�� ;" #: ../../diskdrake/interactive.pm_.c:969 msgid "" "Sorry I won't accept to create /boot so far onto the drive (on a cylinder > " "1024).\n" "Either you use LILO and it won't work, or you don't use LILO and you don't " "need /boot" msgstr "" "��, �� /boot �� " "�� 1024.\n" "�� LILO �� , �� LILO " "�� /boot" #: ../../diskdrake/interactive.pm_.c:973 msgid "" "The partition you've selected to add as root (/) is physically located " "beyond\n" "the 1024th cylinder of the hard drive, and you have no /boot partition.\n" "If you plan to use the LILO boot manager, be careful to add a /boot partition" msgstr "" "� �� root (/) �� 1024 ��\n" "�� /boot.\n" "�� LILO, �� /boot." #: ../../diskdrake/interactive.pm_.c:979 msgid "" "You've selected a software RAID partition as root (/).\n" "No bootloader is able to handle this without a /boot partition.\n" "So be careful to add a /boot partition" msgstr "" "�� software RAID �� root (/).\n" "�� " "�� /boot.\n" "�� /boot." #: ../../diskdrake/interactive.pm_.c:999 #, c-format msgid "Partition table of drive %s is going to be written to disk!" msgstr "� �� %s �� !" #: ../../diskdrake/interactive.pm_.c:1003 msgid "You'll need to reboot before the modification can take place" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:1014 #, c-format msgid "After formatting partition %s, all data on this partition will be lost" msgstr "" "�� %s, �� " "�� " #: ../../diskdrake/interactive.pm_.c:1016 msgid "Formatting" msgstr "��" #: ../../diskdrake/interactive.pm_.c:1017 #, c-format msgid "Formatting loopback file %s" msgstr "�� loopback %s" #: ../../diskdrake/interactive.pm_.c:1018 #: ../../install_steps_interactive.pm_.c:476 #, c-format msgid "Formatting partition %s" msgstr "�� %s" #: ../../diskdrake/interactive.pm_.c:1029 #, fuzzy msgid "Hide files" msgstr "�� mkraid" #: ../../diskdrake/interactive.pm_.c:1029 #, fuzzy msgid "Move files to the new partition" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:1030 #, c-format msgid "" "Directory %s already contains data\n" "(%s)" msgstr "" #: ../../diskdrake/interactive.pm_.c:1041 #, fuzzy msgid "Moving files to the new partition" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:1045 #, c-format msgid "Copying %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1049 #, fuzzy, c-format msgid "Removing %s" msgstr "��: %s\n" #: ../../diskdrake/interactive.pm_.c:1059 #, c-format msgid "partition %s is now known as %s" msgstr "" #: ../../diskdrake/interactive.pm_.c:1080 #: ../../diskdrake/interactive.pm_.c:1139 msgid "Device: " msgstr "��: " #: ../../diskdrake/interactive.pm_.c:1081 #, c-format msgid "DOS drive letter: %s (just a guess)\n" msgstr "�� DOS �� : %s \n" #: ../../diskdrake/interactive.pm_.c:1085 #: ../../diskdrake/interactive.pm_.c:1093 #: ../../diskdrake/interactive.pm_.c:1157 msgid "Type: " msgstr "��: " #: ../../diskdrake/interactive.pm_.c:1089 msgid "Name: " msgstr "��: " #: ../../diskdrake/interactive.pm_.c:1097 #, c-format msgid "Start: sector %s\n" msgstr "��: �� %s\n" #: ../../diskdrake/interactive.pm_.c:1098 #, c-format msgid "Size: %s" msgstr "��: %s" #: ../../diskdrake/interactive.pm_.c:1100 #, c-format msgid ", %s sectors" msgstr ", %s ��" #: ../../diskdrake/interactive.pm_.c:1102 #, fuzzy, c-format msgid "Cylinder %d to %d\n" msgstr "�� %d �� %d\n" #: ../../diskdrake/interactive.pm_.c:1103 msgid "Formatted\n" msgstr "��\n" #: ../../diskdrake/interactive.pm_.c:1104 msgid "Not formatted\n" msgstr "��\n" #: ../../diskdrake/interactive.pm_.c:1105 msgid "Mounted\n" msgstr "��\n" #: ../../diskdrake/interactive.pm_.c:1106 #, c-format msgid "RAID md%s\n" msgstr "RAID md%s\n" #: ../../diskdrake/interactive.pm_.c:1108 #, fuzzy, c-format msgid "" "Loopback file(s):\n" " %s\n" msgstr "�� loopback: %s\n" #: ../../diskdrake/interactive.pm_.c:1109 msgid "" "Partition booted by default\n" " (for MS-DOS boot, not for lilo)\n" msgstr "" "�� \n" " (�� MS-DOS, �� lilo)\n" #: ../../diskdrake/interactive.pm_.c:1111 #, c-format msgid "Level %s\n" msgstr "�� %s\n" #: ../../diskdrake/interactive.pm_.c:1112 #, c-format msgid "Chunk size %s\n" msgstr "�� chunk %s\n" #: ../../diskdrake/interactive.pm_.c:1113 #, c-format msgid "RAID-disks %s\n" msgstr "�� RAID %s\n" #: ../../diskdrake/interactive.pm_.c:1115 #, c-format msgid "Loopback file name: %s" msgstr "�� loopback: %s" #: ../../diskdrake/interactive.pm_.c:1118 msgid "" "\n" "Chances are, this partition is\n" "a Driver partition, you should\n" "probably leave it alone.\n" msgstr "" "\n" "�� , �� \n" "�� , �� \n" "�� .\n" #: ../../diskdrake/interactive.pm_.c:1121 msgid "" "\n" "This special Bootstrap\n" "partition is for\n" "dual-booting your system.\n" msgstr "" "\n" "�� Bootstrap\n" "�� \n" "dual-booting �� .\n" #: ../../diskdrake/interactive.pm_.c:1140 #, c-format msgid "Size: %s\n" msgstr "��: %s\n" #: ../../diskdrake/interactive.pm_.c:1141 #, c-format msgid "Geometry: %s cylinders, %s heads, %s sectors\n" msgstr "��: %s ��, %s ��, %s ��\n" #: ../../diskdrake/interactive.pm_.c:1142 msgid "Info: " msgstr "��: " #: ../../diskdrake/interactive.pm_.c:1143 #, c-format msgid "LVM-disks %s\n" msgstr "�� LVM %s\n" #: ../../diskdrake/interactive.pm_.c:1144 #, c-format msgid "Partition table type: %s\n" msgstr "�� : %s\n" #: ../../diskdrake/interactive.pm_.c:1145 #, fuzzy, c-format msgid "on channel %d id %d\n" msgstr "�� bus %d id %d\n" #: ../../diskdrake/interactive.pm_.c:1175 #, fuzzy msgid "Filesystem encryption key" msgstr "�� : " #: ../../diskdrake/interactive.pm_.c:1176 msgid "Choose your filesystem encryption key" msgstr "" #: ../../diskdrake/interactive.pm_.c:1179 #, fuzzy, c-format msgid "This encryption key is too simple (must be at least %d characters long)" msgstr "" "�� (�� %d " "�� )" #: ../../diskdrake/interactive.pm_.c:1180 #, fuzzy msgid "The encryption keys do not match" msgstr "�� " #: ../../diskdrake/interactive.pm_.c:1183 msgid "Encryption key" msgstr "" #: ../../diskdrake/interactive.pm_.c:1184 msgid "Encryption key (again)" msgstr "" #: ../../diskdrake/removable.pm_.c:47 #, fuzzy msgid "Change type" msgstr "�� " #: ../../diskdrake/removable_gtk.pm_.c:28 #, fuzzy msgid "Please click on a medium" msgstr "�� " #: ../../diskdrake/smbnfs_gtk.pm_.c:162 #, c-format msgid "Can't login using username %s (bad password?)" msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:166 ../../diskdrake/smbnfs_gtk.pm_.c:175 #, fuzzy msgid "Domain Authentication Required" msgstr "�� " #: ../../diskdrake/smbnfs_gtk.pm_.c:167 #, fuzzy msgid "Another one" msgstr "��" #: ../../diskdrake/smbnfs_gtk.pm_.c:167 #, fuzzy msgid "Which username" msgstr "�� " #: ../../diskdrake/smbnfs_gtk.pm_.c:176 msgid "" "Please enter your username, password and domain name to access this host." msgstr "" #: ../../diskdrake/smbnfs_gtk.pm_.c:178 #, fuzzy msgid "Username" msgstr "�� " #: ../../diskdrake/smbnfs_gtk.pm_.c:180 #, fuzzy msgid "Domain" msgstr "�� (domain) NIS" #: ../../diskdrake/smbnfs_gtk.pm_.c:200 #, fuzzy msgid "Search servers" msgstr "�� DNS" #: ../../fs.pm_.c:552 ../../fs.pm_.c:562 ../../fs.pm_.c:566 ../../fs.pm_.c:570 #: ../../fs.pm_.c:574 ../../fs.pm_.c:578 #, c-format msgid "%s formatting of %s failed" msgstr "%s �� %s ��" #: ../../fs.pm_.c:615 #, c-format msgid "I don't know how to format %s in type %s" msgstr "�� %s �� %s" #: ../../fs.pm_.c:687 ../../fs.pm_.c:731 #, c-format msgid "mounting partition %s in directory %s failed" msgstr "" #: ../../fs.pm_.c:746 ../../partition_table.pm_.c:602 #, c-format msgid "error unmounting %s: %s" msgstr "�� %s: %s" #: ../../fsedit.pm_.c:21 msgid "simple" msgstr "��" #: ../../fsedit.pm_.c:25 msgid "with /usr" msgstr "" #: ../../fsedit.pm_.c:30 msgid "server" msgstr "��" #: ../../fsedit.pm_.c:472 msgid "You can't use JFS for partitions smaller than 16MB" msgstr "" "�� JFS �� 16MB" #: ../../fsedit.pm_.c:473 msgid "You can't use ReiserFS for partitions smaller than 32MB" msgstr "" "�� ReiserFS �� " "32MB" #: ../../fsedit.pm_.c:492 msgid "Mount points must begin with a leading /" msgstr "�� /" #: ../../fsedit.pm_.c:493 #, c-format msgid "There is already a partition with mount point %s\n" msgstr "�� %s\n" #: ../../fsedit.pm_.c:497 #, c-format msgid "You can't use a LVM Logical Volume for mount point %s" msgstr "�� LVM �� %s" #: ../../fsedit.pm_.c:499 msgid "This directory should remain within the root filesystem" msgstr "" "�� (root)" #: ../../fsedit.pm_.c:501 #, fuzzy msgid "" "You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount " "point\n" msgstr "" "�� (ext2, reiserfs) �� " "�� \n" #: ../../fsedit.pm_.c:503 #, fuzzy, c-format msgid "You can't use an encrypted file system for mount point %s" msgstr "�� LVM �� %s" #: ../../fsedit.pm_.c:570 #, fuzzy msgid "Not enough free space for auto-allocating" msgstr "" "�� " #: ../../fsedit.pm_.c:572 msgid "Nothing to do" msgstr "" #: ../../fsedit.pm_.c:665 #, c-format msgid "Error opening %s for writing: %s" msgstr "�� %s �� : %s" #: ../../fsedit.pm_.c:750 msgid "" "An error occurred - no valid devices were found on which to create new " "filesystems. Please check your hardware for the cause of this problem" msgstr "" "�� - �� " "�� . �� " "�� " #: ../../fsedit.pm_.c:773 msgid "You don't have any partitions!" msgstr "�� !" #: ../../harddrake/ui.pm_.c:15 #, fuzzy msgid "Model" msgstr "��" #: ../../harddrake/ui.pm_.c:15 #, fuzzy msgid "hard disk model" msgstr "DMA ��" #: ../../harddrake/ui.pm_.c:16 #, fuzzy msgid "Channel" msgstr "��" #: ../../harddrake/ui.pm_.c:16 msgid "EIDE/SCSI channel" msgstr "" #: ../../harddrake/ui.pm_.c:18 msgid "Bus" msgstr "" #: ../../harddrake/ui.pm_.c:19 msgid "" "this is the physical bus on which the device is plugged (eg: PCI, USB, ...)" msgstr "" #: ../../harddrake/ui.pm_.c:20 #, fuzzy msgid "Module" msgstr "��" #: ../../harddrake/ui.pm_.c:20 msgid "the module of the GNU/Linux kernel that handle that device" msgstr "" #: ../../harddrake/ui.pm_.c:21 msgid "Media class" msgstr "" #: ../../harddrake/ui.pm_.c:21 msgid "class of hardware device" msgstr "" #: ../../harddrake/ui.pm_.c:22 ../../printerdrake.pm_.c:1404 msgid "Description" msgstr "��" #: ../../harddrake/ui.pm_.c:22 msgid "this field describe the device" msgstr "" #: ../../harddrake/ui.pm_.c:24 #, fuzzy msgid "Bus identification" msgstr "�� " #: ../../harddrake/ui.pm_.c:25 msgid "" "- PCI and USB devices : this list the vendor, device, subvendor and " "subdevice PCI/USB ids" msgstr "" #: ../../harddrake/ui.pm_.c:27 msgid "Location on the bus" msgstr "" #: ../../harddrake/ui.pm_.c:28 msgid "" "- pci devices: this gives the PCI slot, device and function of this card\n" "- eide devices: the device is either a slave or a master device\n" "- scsi devices: the scsi bus and the scsi device ids" msgstr "" #: ../../harddrake/ui.pm_.c:31 #, fuzzy msgid "Old device file" msgstr "�� " #: ../../harddrake/ui.pm_.c:32 msgid "old static device name used in dev package" msgstr "" #: ../../harddrake/ui.pm_.c:33 #, fuzzy msgid "New devfs device" msgstr "�� " #: ../../harddrake/ui.pm_.c:34 msgid "new dinamic device name generated by incore kernel devfs" msgstr "" #: ../../harddrake/ui.pm_.c:35 #, fuzzy msgid "Number of buttons" msgstr "�� " #: ../../harddrake/ui.pm_.c:36 msgid "the vendor name of the device" msgstr "" #: ../../harddrake/ui.pm_.c:60 #, fuzzy msgid "/_Quit" msgstr "��" #: ../../harddrake/ui.pm_.c:61 ../../harddrake/ui.pm_.c:62 #: ../../harddrake/ui.pm_.c:68 ../../standalone/logdrake_.c:110 msgid "/_Help" msgstr "/_��" #: ../../harddrake/ui.pm_.c:62 #, fuzzy msgid "/_Help..." msgstr "/_��" #: ../../harddrake/ui.pm_.c:63 msgid "Harddrake help" msgstr "" #: ../../harddrake/ui.pm_.c:64 msgid "" "Description of the fields:\n" "\n" msgstr "" #: ../../harddrake/ui.pm_.c:68 #, fuzzy msgid "/_About..." msgstr "/��/_�� ..." #: ../../harddrake/ui.pm_.c:69 msgid "About Harddrake" msgstr "" #: ../../harddrake/ui.pm_.c:70 msgid "" "This is HardDrake, a Mandrake hardware configuration tool.\n" "Version:" msgstr "" #: ../../harddrake/ui.pm_.c:71 #, fuzzy msgid "Author:" msgstr "�� " #: ../../harddrake/ui.pm_.c:83 #, fuzzy msgid "Harddrake2 version " msgstr "�� " #: ../../harddrake/ui.pm_.c:91 #, fuzzy msgid "Detected hardware" msgstr "�� " #: ../../harddrake/ui.pm_.c:92 #, fuzzy msgid "Configure module" msgstr "�� " #: ../../harddrake/ui.pm_.c:92 #, fuzzy msgid "Informations" msgstr "�� " #: ../../harddrake/ui.pm_.c:92 msgid "Run config tool" msgstr "" #: ../../harddrake/ui.pm_.c:96 #, fuzzy msgid "Detection in progress" msgstr "�� %s" #: ../../harddrake/ui.pm_.c:96 ../../interactive.pm_.c:388 msgid "Please wait" msgstr "�� " #: ../../harddrake/ui.pm_.c:139 msgid "primary" msgstr "" #: ../../harddrake/ui.pm_.c:139 #, fuzzy msgid "secondary" msgstr "%d ��" #: ../../harddrake/ui.pm_.c:176 msgid "You can configure each parameter of the module here." msgstr "" #: ../../harddrake/ui.pm_.c:192 #, fuzzy, c-format msgid "Running \"%s\" ..." msgstr "�� " #: ../../harddrake/v4l.pm_.c:15 ../../harddrake/v4l.pm_.c:65 #, fuzzy msgid "Auto-detect" msgstr "�� " #: ../../harddrake/v4l.pm_.c:66 ../../harddrake/v4l.pm_.c:186 #, fuzzy msgid "Unknown|Generic" msgstr "��" #: ../../harddrake/v4l.pm_.c:98 msgid "Unknown|CPH05X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:99 msgid "Unknown|CPH06X (bt878) [many vendors]" msgstr "" #: ../../harddrake/v4l.pm_.c:210 msgid "" "For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-" "detect the rights parameters.\n" "If your card is misdetected, you can force the right tuner and card types " "here. Just select your tv card parameters if needed" msgstr "" #: ../../harddrake/v4l.pm_.c:213 #, fuzzy msgid "Card model :" msgstr "DMA ��" #: ../../harddrake/v4l.pm_.c:214 #, fuzzy msgid "Tuner type :" msgstr "�� " #: ../../harddrake/v4l.pm_.c:215 msgid "Number of capture buffers :" msgstr "" #: ../../harddrake/v4l.pm_.c:215 msgid "number of capture buffers for mmap'ed capture" msgstr "" #: ../../harddrake/v4l.pm_.c:217 #, fuzzy msgid "PLL setting :" msgstr "��" #: ../../harddrake/v4l.pm_.c:218 msgid "Radio support :" msgstr "" #: ../../harddrake/v4l.pm_.c:218 msgid "enable radio support" msgstr "" #: ../../help.pm_.c:13 msgid "" "GNU/Linux is a multiuser system, and this means that each user can have his\n" "own preferences, his own files and so on. You can read the ``User Guide''\n" "to learn more. But unlike \"root\", which is the administrator, the users\n" "you will add here will not be entitled to change anything except their own\n" "files and their own configuration. You will have to create at least one\n" "regular user for yourself. That account is where you should log in for\n" "routine use. Although it is very practical to log in as \"root\" everyday,\n" "it may also be very dangerous! The slightest mistake could mean that your\n" "system would not work any more. If you make a serious mistake as a regular\n" "user, you may only lose some information, but not the entire system.\n" "\n" "First, you have to enter your real name. This is not mandatory, of course -\n" "as you can actually enter whatever you want. DrakX will then take the first\n" "word you have entered in the box and will bring it over to the \"User\n" "name\". This is the name this particular user will use to log onto the\n" "system. You can change it. You then have to enter a password here. A\n" "non-privileged (regular) user's password is not as crucial as \"root\"' one\n" "from a security point of view, but that is no reason to neglect it: after\n" "all, your files are at risk.\n" "\n" "If you click on \"Accept user\", you can then add as many as you want. Add\n" "a user for each one of your friends: your father or your sister, for\n" "example. When you finish adding all the users you want, select \"Done\".\n" "\n" "Clicking the \"Advanced\" button allows you to change the default \"shell\"\n" "for that user (bash by default)." msgstr "" #: ../../help.pm_.c:41 #, fuzzy msgid "" "Listed above are the existing Linux partitions detected on your hard drive.\n" "You can keep the choices made by the wizard, they are good for most common\n" "installations. If you make any changes, you must at least define a root\n" "partition (\"/\"). Do not choose too small a partition or you will not be\n" "able to install enough software. If you want to store your data on a\n" "separate partition, you will also need to create a partition for \"/home\"\n" "(only possible if you have more than one Linux partition available).\n" "\n" "Each partition is listed as follows: \"Name\", \"Capacity\".\n" "\n" "\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc." msgstr "" "�� Linux �� " "�� \n" "�� . �� , �� \n" "�� . �� , �� " "��\n" "�� (root, \"/\"). �� " "��\n" "�� . �� " "��\n" "�� , �� \"/home" "\" (��\n" "�� Linux �� ).\n" "\n" "\n" "��, �� : \"��\", \"��\".\n" "\n" "\n" "�� : �� , �� , �� " "�� \n" "�� , \"hda1\").\n" "\n" "\n" "� �� \"hd\" �� IDE �� \"sd\" �� SCSI ��.\n" "\n" "\n" "� �� \"hd\" � \"sd\". �� " "IDE \n" "��: \n" "\n" " * \"a\" �� master �� IDE,\n" "\n" " * \"b\" �� slave �� IDE,\n" "\n" " * \"c\" �� master �� IDE,\n" "\n" " * \"d\" �� slave �� IDE.\n" "\n" "\n" "�� SCSI, \"a\" �� , \"b\" �� " "��..." #: ../../help.pm_.c:72 msgid "" "The Mandrake Linux installation is spread out over several CD-ROMs. DrakX\n" "knows if a selected package is located on another CD-ROM and will eject the\n" "current CD and ask you to insert a different one as required." msgstr "" #: ../../help.pm_.c:77 msgid "" "It is now time to specify which programs you wish to install on your\n" "system. There are thousands of packages available for Mandrake Linux, and\n" "you are not supposed to know them all by heart.\n" "\n" "If you are performing a standard installation from a CD-ROM, you will first\n" "be asked to specify the CDs you currently have (in Expert mode only). Check\n" "the CD labels and highlight the boxes corresponding to the CDs you have\n" "available for installation. Click \"OK\" when you are ready to continue.\n" "\n" "Packages are sorted in groups corresponding to a particular use of your\n" "machine. The groups themselves are sorted into four sections:\n" "\n" " * \"Workstation\": if you plan to use your machine as a workstation,\n" "select one or more of the corresponding groups;\n" "\n" " * \"Development\": if your machine is to be used for programming, choose\n" "the desired group(s);\n" "\n" " * \"Server\": if your machine is intended to be a server, you will be able\n" "to select which of the most common services you wish to install on your\n" "machine;\n" "\n" " * \"Graphical Environment\": finally, this is where you will choose your\n" "preferred graphical environment. At least one must be selected if you want\n" "to have a graphical workstation!\n" "\n" "Moving the mouse cursor over a group name will display a short explanatory\n" "text about that group. If you deselect all groups when performing a regular\n" "installation (by opposition to an upgrade), a dialog will pop up proposing\n" "different options for a minimal installation:\n" "\n" " * \"With X\": install the fewer packages possible to have a working\n" "graphical desktop;\n" "\n" " * \"With basic documentation\": installs the base system plus basic\n" "utilities and their documentation. This installation is suitable for\n" "setting up a server;\n" "\n" " * \"Truly minimal install\": will install the strict minimum necessary to\n" "get a working Linux system, in command line only. This installation is\n" "about 65Mb large.\n" "\n" "You can check the \"Individual package selection\" box, which is useful if\n" "you are familiar with the packages being offered or if you want to have\n" "total control over what will be installed.\n" "\n" "If you started the installation in \"Upgrade\" mode, you can unselect all\n" "groups to avoid installing any new package. This is useful for repairing or\n" "updating an existing system." msgstr "" #: ../../help.pm_.c:128 msgid "" "Finally, depending on whether or not you selected individual packages, you\n" "will be presented a tree containing all packages classified by groups and\n" "subgroups. While browsing the tree, you can select entire groups,\n" "subgroups, or individual packages.\n" "\n" "Whenever you select a package on the tree, a description appears on the\n" "right. When your selection is finished, click the \"Install\" button which\n" "will then launch the installation process. Depending on the speed of your\n" "hardware and the number of packages that need to be installed, it may take\n" "a while to complete the process. An estimate of the time it will take to\n" "install everything is displayed on the screen, to help you gauge if there\n" "is sufficient time to enjoy a cup of coffee.\n" "\n" "!! If a server package has been selected, either intentionally or because\n" "it was part of a whole group, you will be asked to confirm that you really\n" "want those servers to be installed. Under Mandrake Linux, any installed\n" "servers are started by default at boot time. Even if they are safe and have\n" "no known issues at the time the distribution was shipped, it may happen\n" "that security holes are discovered after this version of Mandrake Linux was\n" "finalized. If you do not know what a particular service is supposed to do\n" "or why it is being installed, then click \"No\". Clicking \"Yes\" will\n" "install the listed services and they will be started automatically by\n" "default. !!\n" "\n" "The \"Automatic dependencies\" option simply disables the warning dialog\n" "which appears whenever the installer automatically selects a package. This\n" "occurs because it has determined that it needs to satisfy a dependency with\n" "another package in order to successfully complete the installation.\n" "\n" "The tiny floppy disk icon at the bottom of the list allows to load the\n" "package list chosen during a previous installation. Clicking on this icon\n" "will ask you to insert a floppy disk previously created at the end of\n" "another installation. See the second tip of last step on how to create such\n" "a floppy." msgstr "" #: ../../help.pm_.c:164 msgid "" "You are now proposed to set up your Internet/network connection. If you\n" "wish to connect your computer to the Internet or to a local network, click\n" "\"OK\". The autodetection of network devices and modem will be launched. If\n" "this detection fails, uncheck the \"Use auto detection\" box next time. You\n" "may also choose not to configure the network, or do it later; in that case,\n" "simply click the \"Cancel\" button.\n" "\n" "Available connections are: traditional modem, ISDN modem, ADSL connection,\n" "cable modem, and finally a simple LAN connection (Ethernet).\n" "\n" "Here, we will not detail each configuration. Simply make sure that you have\n" "all the parameters from your Internet Service Provider or system\n" "administrator.\n" "\n" "You can consult the ``User Guide'' chapter about Internet connections for\n" "details about the configuration, or simply wait until your system is\n" "installed and use the program described there to configure your connection.\n" "\n" "If you wish to configure the network later after installation, or if you\n" "are finished configuring your network connection, click \"Cancel\"." msgstr "" #: ../../help.pm_.c:186 #, fuzzy msgid "" "You may now choose which services you wish to start at boot time.\n" "\n" "Here are presented all the services available with the current\n" "installation. Review them carefully and uncheck those which are not always\n" "needed at boot time.\n" "\n" "You can get a short explanatory text about a service by selecting a\n" "specific service. However, if you are not sure whether a service is useful\n" "or not, it is safer to leave the default behavior.\n" "\n" "!! At this stage, be very careful if you intend to use your machine as a\n" "server: you will probably not want to start any services which you do not\n" "need. Please remember that several services can be dangerous if they are\n" "enabled on a server. In general, select only the services you really need.\n" "!!" msgstr "" "�� \n" "��.\n" "\n" "\n" "�� , \n" "�� .\n" "\n" "\n" "�� \n" "��. �� , \n" "�� \n" "�� .\n" "��, �� ." #: ../../help.pm_.c:203 msgid "" "GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it in\n" "local time according to the time zone you selected. It is however possible\n" "to deactivate this by deselecting \"Hardware clock set to GMT\" so that the\n" "hardware clock is the same as the system clock. This is useful when the\n" "machine is hosting another operating system like Windows.\n" "\n" "The \"Automatic time synchronization\" option will automatically regulate\n" "the clock by connecting to a remote time server on the Internet. In the\n" "list that is presented, choose a server located near you. Of course you\n" "must have a working Internet connection for this feature to work. It will\n" "actually install on your machine a time server which can be optionally used\n" "by other machines on your local network." msgstr "" #: ../../help.pm_.c:217 msgid "" "X (for X Window System) is the heart of the GNU/Linux graphical interface\n" "on which all the graphical environments (KDE, GNOME, AfterStep,\n" "WindowMaker, etc.) bundled with Mandrake Linux rely. In this section, DrakX\n" "will try to configure X automatically.\n" "\n" "It is extremely rare for it to fail, unless the hardware is very old (or\n" "very new). If it succeeds, it will start X automatically with the best\n" "resolution possible, depending on the size of the monitor. A window will\n" "then appear and ask you if you can see it.\n" "\n" "If you are doing an \"Expert\" installation, you will enter the X\n" "configuration wizard. See the corresponding section of the manual for more\n" "information about this wizard.\n" "\n" "If you can see the message during the test, and answer \"Yes\", then DrakX\n" "will proceed to the next step. If you cannot see the message, it simply\n" "means that the configuration was wrong and the test will automatically end\n" "after 10 seconds, restoring the screen." msgstr "" #: ../../help.pm_.c:237 msgid "" "The first time you try the X configuration, you may not be very satisfied\n" "with its display (screen is too small, shifted left or right...). Hence,\n" "even if X starts up correctly, DrakX then asks you if the configuration\n" "suits you. It will also propose to change it by displaying a list of valid\n" "modes it could find, asking you to select one.\n" "\n" "As a last resort, if you still cannot get X to work, choose \"Change\n" "graphics card\", select \"Unlisted card\", and when prompted on which\n" "server, choose \"FBDev\". This is a failsafe option which works with any\n" "modern graphics card. Then choose \"Test again\" to be sure." msgstr "" #: ../../help.pm_.c:249 msgid "" "Finally, you will be asked whether you want to see the graphical interface\n" "at boot. Note this question will be asked even if you chose not to test the\n" "configuration. Obviously, you want to answer \"No\" if your machine is to\n" "act as a server, or if you were not successful in getting the display\n" "configured." msgstr "" #: ../../help.pm_.c:256 msgid "" "The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n" "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n" "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n" "should come back to this step for help in at least two situations:\n" "\n" " * when installing the bootloader, DrakX will rewrite the boot sector (MBR)\n" "of your main disk (unless you are using another boot manager), to allow you\n" "to start up with either Windows or GNU/Linux (assuming you have Windows in\n" "your system). If you need to reinstall Windows, the Microsoft install\n" "process will rewrite the boot sector, and then you will not be able to\n" "start GNU/Linux!\n" "\n" " * if a problem arises and you cannot start up GNU/Linux from the hard\n" "disk, this floppy disk will be the only means of starting up GNU/Linux. It\n" "contains a fair number of system tools for restoring a system, which has\n" "crashed due to a power failure, an unfortunate typing error, a typo in a\n" "password, or any other reason.\n" "\n" "When you click on this step, you will be asked to enter a disk inside the\n" "drive. The floppy disk you will insert must be empty or contain data which\n" "you do not need. You will not have to format it since DrakX will rewrite\n" "the whole disk." msgstr "" #: ../../help.pm_.c:280 #, fuzzy msgid "" "At this point, you need to choose where you want to install the Mandrake\n" "Linux operating system on your hard drive. If your hard drive is empty or\n" "if an existing operating system is using all the available space, you will\n" "need to partition it. Basically, partitioning a hard drive consists of\n" "logically dividing it to create space to install your new Mandrake Linux\n" "system.\n" "\n" "Because the partitioning process' effects are usually irreversible,\n" "partitioning can be intimidating and stressful if you are an inexperienced\n" "user. Fortunately, there is a wizard which simplifies this process. Before\n" "beginning, please consult the manual and take your time.\n" "\n" "If you are running the installation in Expert mode, you will enter\n" "DiskDrake, the Mandrake Linux partitioning tool, which allows you to\n" "fine-tune your partitions. See the DiskDrake section in the ``User Guide''.\n" "From the installation interface, you can use the wizards as described here\n" "by clicking the dialog's \"Wizard\" button.\n" "\n" "If partitions have already been defined, either from a previous\n" "installation or from another partitioning tool, simply select those to\n" "install your Linux system.\n" "\n" "If partitions are not defined, you will need to create them using the\n" "wizard. Depending on your hard drive configuration, several options are\n" "available:\n" "\n" " * \"Use free space\": this option will simply lead to an automatic\n" "partitioning of your blank drive(s). You will not be prompted further;\n" "\n" " * \"Use existing partition\": the wizard has detected one or more existing\n" "Linux partitions on your hard drive. If you want to use them, choose this\n" "option;\n" "\n" " * \"Use the free space on the Windows; partition\": if Microsoft Windows\n" "is installed on your hard drive and takes all the space available on it,\n" "you have to create free space for Linux data. To do so, you can delete your\n" "Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n" "mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n" "be performed without the loss of any data, provided you previously\n" "defragment the Windows partition. Backing up your data won't hurt either..\n" "This solution is recommended if you want to use both Mandrake Linux and\n" "Microsoft Windows on the same computer.\n" "\n" " Before choosing this option, please understand that after this\n" "procedure, the size of your Microsoft Windows partition will be smaller\n" "than at the present time. You will have less free space under Microsoft\n" "Windows to store your data or to install new software;\n" "\n" " * \"Erase entire disk\": if you want to delete all data and all partitions\n" "present on your hard drive and replace them with your new Mandrake Linux\n" "system, choose this option. Be careful with this solution because you will\n" "not be able to revert your choice after you confirm;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Remove Windows\": this will simply erase everything on the drive and\n" "begin fresh, partitioning everything from scratch. All data on your disk\n" "will be lost;\n" "\n" " !! If you choose this option, all data on your disk will be lost. !!\n" "\n" " * \"Expert mode\": choose this option if you want to manually partition\n" "your hard drive. Be careful - it is a powerful but dangerous choice. You\n" "can very easily lose all your data. Hence, do not choose this unless you\n" "know what you are doing." msgstr "" "�� , �� GNU/Linux\n" "�� . �� " "��\n" "�� , �� , �� " "��\n" "�� , �� " "�� Mandrake Linux.\n" "\n" "\n" "�� , �� " "�� \n" "�� .\n" "�� . �� , �� " "�� \n" "�� .\n" "\n" "\n" "�� . �� " "�� \n" "�� (swap).\n" "\n" "\n" "�� " "��, �� \n" "�� Linux ��.\n" "\n" "\n" "�� , �� " "��. �� \n" "�� , �� :\n" "\n" "* �� : �� " "Linux �� .\n" " �� , �� .\n" "\n" "\n" "* �� : �� " "�� \n" " �� Mandrake Linux ��, " "�� \n" " ��. ��: �� \n" " �� ! �� !\n" "\n" "\n" "* �� Windows: �� " "�� Microsoft Windows\n" " �� , �� " "�� Linux.\n" " �� , �� Windows " "�� \n" " (�� \"�� \" � \"��\") � �� " "�� Windows.\n" " � �� . �� " "�� \n" " Microsoft Windows �� Mandrake Linux �� .\n" "\n" "\n" " �� , �� " "�� \n" " �� Windows �� " "�� .\n" "\n" "\n" "* ��: �� , �� " "��. �� \n" " �� , �� " "�� \n" " �� . �� " "��." #: ../../help.pm_.c:347 msgid "" "There you are. Installation is now complete and your GNU/Linux system is\n" "ready to use. Just click \"OK\" to reboot the system. You can start\n" "GNU/Linux or Windows, whichever you prefer (if you are dual-booting), as\n" "soon as the computer has booted up again.\n" "\n" "The \"Advanced\" button (in Expert mode only) shows two more buttons to:\n" "\n" " * \"generate auto-install floppy\": to create an installation floppy disk\n" "which will automatically perform a whole installation without the help of\n" "an operator, similar to the installation you just configured.\n" "\n" " Note that two different options are available after clicking the button:\n" "\n" " * \"Replay\". This is a partially automated installation as the\n" "partitioning step (and only this one) remains interactive;\n" "\n" " * \"Automated\". Fully automated installation: the hard disk is\n" "completely rewritten, all data is lost.\n" "\n" " This feature is very handy when installing a great number of similar\n" "machines. See the Auto install section on our web site;\n" "\n" " * \"Save packages selection\"(*): saves the package selection as done\n" "previously. Then, when doing another installation, insert the floppy inside\n" "the drive and run the installation going to the help screen by pressing on\n" "the [F1] key, and by issuing >>linux defcfg=\"floppy\"<<.\n" "\n" "(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n" "\"mformat a:\")" msgstr "" #: ../../help.pm_.c:378 #, fuzzy msgid "" "Any partitions that have been newly defined must be formatted for use\n" "(formatting means creating a filesystem).\n" "\n" "At this time, you may wish to reformat some already existing partitions to\n" "erase any data they contain. If you wish to do that, please select those\n" "partitions as well.\n" "\n" "Please note that it is not necessary to reformat all pre-existing\n" "partitions. You must reformat the partitions containing the operating\n" "system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n" "reformat partitions containing data that you wish to keep (typically\n" "\"/home\").\n" "\n" "Please be careful when selecting partitions. After formatting, all data on\n" "the selected partitions will be deleted and you will not be able to recover\n" "any of it.\n" "\n" "Click on \"OK\" when you are ready to format partitions.\n" "\n" "Click on \"Cancel\" if you want to choose another partition for your new\n" "Mandrake Linux operating system installation.\n" "\n" "Click on \"Advanced\" if you wish to select partitions that will be checked\n" "for bad blocks on the disk." msgstr "" "�� (�� " "��\n" "��) �� .\n" "\n" "\n" "�� " "�� \n" "�� . �� , �� " "�� \n" "�� .\n" "\n" "\n" "�� " "��.\n" "�� " "(�� \n" "\"/\", \"/usr\" �� \"/var\"), �� " "�� \n" "�� (�� \"/home\").\n" "\n" "\n" "�� " "�� \n" "�� .\n" "\n" "\n" "�� \"OK\" �� .\n" "\n" "\n" "�� \"��\" �� " "�� \n" "�� Mandrake Linux." #: ../../help.pm_.c:404 #, fuzzy msgid "" "Your new Mandrake Linux operating system is currently being installed.\n" "Depending on the number of packages you will be installing and the speed of\n" "your computer, this operation could take from a few minutes to a\n" "significant amount of time.\n" "\n" "Please be patient." msgstr "" "�� Mandrake Linux ��.\n" "�� , �� \n" "�� .\n" "\n" "\n" "�� ." #: ../../help.pm_.c:412 msgid "" "At the time you are installing Mandrake Linux, it is likely that some\n" "packages have been updated since the initial release. Some bugs may have\n" "been fixed, and security issues solved. To allow you to benefit from these\n" "updates, you are now proposed to download them from the Internet. Choose\n" "\"Yes\" if you have a working Internet connection, or \"No\" if you prefer\n" "to install updated packages later.\n" "\n" "Choosing \"Yes\" displays a list of places from which updates can be\n" "retrieved. Choose the one nearest you. Then a package-selection tree\n" "appears: review the selection, and press \"Install\" to retrieve and\n" "install the selected package(s), or \"Cancel\" to abort." msgstr "" #: ../../help.pm_.c:425 msgid "" "Before continuing, you should read carefully the terms of the license. It\n" "covers the whole Mandrake Linux distribution, and if you do not agree with\n" "all the terms in it, click on the \"Refuse\" button which will immediately\n" "terminate the installation. To continue with the installation, click on the\n" "\"Accept\" button." msgstr "" #: ../../help.pm_.c:432 msgid "" "At this point, it is time to choose the security level desired for the\n" "machine. As a rule of thumb, the more exposed the machine is, and the more\n" "the data stored in it is crucial, the higher the security level should be.\n" "However, a higher security level is generally obtained at the expense of\n" "easiness of use. Refer to the \"msec\" chapter of the ``Reference Manual''\n" "to get more information about the meaning of these levels.\n" "\n" "If you do not know what to choose, keep the default option." msgstr "" #: ../../help.pm_.c:442 #, fuzzy msgid "" "At this point, you need to choose which partition(s) will be used for the\n" "installation of your Mandrake Linux system. If partitions have already been\n" "defined, either from a previous installation of GNU/Linux or from another\n" "partitioning tool, you can use existing partitions. Otherwise, hard drive\n" "partitions must be defined.\n" "\n" "To create partitions, you must first select a hard drive. You can select\n" "the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n" "``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n" "\n" "To partition the selected hard drive, you can use these options:\n" "\n" " * \"Clear all\": this option deletes all partitions on the selected hard\n" "drive;\n" "\n" " * \"Auto allocate\": this option enables to automatically create \"Ext2\"\n" "and swap partitions in free space of your hard drive;\n" "\n" " * \"More\": gives access to additional features:\n" "\n" " * \"Save partition table\": saves the partition table to a floppy.\n" "Useful for later partition-table recovery if necessary. It is strongly\n" "recommended to perform this step;\n" "\n" " * \"Restore partition table\": allows to restore a previously saved\n" "partition table from floppy disk;\n" "\n" " * \"Rescue partition table\": if your partition table is damaged, you\n" "can try to recover it using this option. Please be careful and remember\n" "that it can fail;\n" "\n" " * \"Reload partition table\": discards all changes and loads your\n" "initial partition table;\n" "\n" " * \"Removable media automounting\": unchecking this option will force\n" "users to manually mount and unmount removable medias such as floppies and\n" "CD-ROMs.\n" "\n" " * \"Wizard\": use this option if you wish to use a wizard to partition\n" "your hard drive. This is recommended if you do not have a good knowledge of\n" "partitioning;\n" "\n" " * \"Undo\": use this option to cancel your changes;\n" "\n" " * \"Toggle to normal/expert mode\": allows additional actions on\n" "partitions (type, options, format) and gives more information;\n" "\n" " * \"Done\": when you are finished partitioning your hard drive, this will\n" "save your changes back to disk.\n" "\n" "Note: you can reach any option using the keyboard. Navigate through the\n" "partitions using [Tab] and [Up/Down] arrows.\n" "\n" "When a partition is selected, you can use:\n" "\n" " * Ctrl-c to create a new partition (when an empty partition is selected);\n" "\n" " * Ctrl-d to delete a partition;\n" "\n" " * Ctrl-m to set the mount point.\n" "\n" "To get information about the different filesystem types available, please\n" "read the ext2fs chapter from the ``Reference Manual''.\n" "\n" "If you are installing on a PPC machine, you will want to create a small HFS\n" "``bootstrap'' partition of at least 1MB, which will be used by the yaboot\n" "bootloader. If you opt to make the partition a bit larger, say 50MB, you\n" "may find it a useful place to store a spare kernel and ramdisk images for\n" "emergency boot situations." msgstr "" "�� , �� " "�� \n" "�� Mandrake Linux. �� , �� " "�� \n" "�� , �� . ��, �� " "�� \n" "�� .\n" "\n" "\n" "�� , �� , " "��\n" "�� \"hda\" �� IDE ��, \"hdb\" �� " "IDE, \"sda\"\n" "�� SCSI �� \n" "\n" "\n" "�� , �� :\n" "\n" " * �� : �� \n" " �� .\n" "\n" "\n" " * �� : �� \n" " ext2 �� swap �� .\n" "\n" "\n" " * �� : �� " "��,\n" " �� . �� " "��\n" " �� .\n" "\n" "\n" " * ��: �� ,�� .\n" "\n" "\n" " * ��: �� ,�� " "�� \n" " �� .\n" "\n" "\n" " * ��: �� . " "�� \n" " �� .\n" "\n" "\n" " * �� : �� " "�� \n" " �� , �� . \n" "\n" "\n" " * �� : �� " "��, �� \n" " �� . � �� .\n" "\n" "\n" " * ��: �� , �� " "�� .\n" "\n" "\n" "��, �� " "��: \n" "�� Tab �� " "��.\n" "\n" "\n" "�� , �� :\n" "\n" " * Ctrl-c �� (�� " "��)\n" "\n" " * Ctrl-d �� \n" "\n" " * Ctrl-m �� \n" "\n" " \n" "�� PPC ��, �� " "�� HFS 'bootstrap' �� 1�� \n" "�� yaboot bootloader. �� , " "�.�. 50��, �� \n" "�� ramdisk image �� ." #: ../../help.pm_.c:513 #, fuzzy msgid "" "More than one Microsoft partition has been detected on your hard drive.\n" "Please choose the one you want to resize in order to install your new\n" "Mandrake Linux operating system.\n" "\n" "Each partition is listed as follows: \"Linux name\", \"Windows name\"\n" "\"Capacity\".\n" "\n" "\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" "\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n" "\"sd\" if it is a SCSI hard drive.\n" "\n" "\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard drives:\n" "\n" " * \"a\" means \"master hard drive on the primary IDE controller\";\n" "\n" " * \"b\" means \"slave hard drive on the primary IDE controller\";\n" "\n" " * \"c\" means \"master hard drive on the secondary IDE controller\";\n" "\n" " * \"d\" means \"slave hard drive on the secondary IDE controller\".\n" "\n" "With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n" "\"second lowest SCSI ID\", etc.\n" "\n" "\"Windows name\" is the letter of your hard drive under Windows (the first\n" "disk or partition is called \"C:\")." msgstr "" "�� Windows �� . �� \n" "�� Mandrake " "Linux.\n" "\n" "\n" "��, �� : \"�� Linux\", \"�� Windows" "\", \"��\".\n" "\n" "\n" "�� Linux �� : �� , �� , �� " "�� \n" "�� , \"hda1\").\n" "\n" "\n" "� �� \"hd\" �� IDE �� \"sd\" �� SCSI ��.\n" "\n" "\n" "� �� \"hd\" � \"sd\". �� " "IDE \n" "��: \n" "\n" " * \"a\" �� master �� IDE,\n" "\n" " * \"b\" �� slave �� IDE,\n" "\n" " * \"c\" �� master �� IDE,\n" "\n" " * \"d\" �� slave �� IDE.\n" "\n" "\n" "�� SCSI, \"a\" �� , \"b\" �� " "��...\n" "\n" "\n" "�� Windows �� " "Windows\n" "(� �� \"C:\")." #: ../../help.pm_.c:544 msgid "Please be patient. This operation can take several minutes." msgstr "�� . �� ." #: ../../help.pm_.c:547 #, fuzzy msgid "" "DrakX now needs to know if you want to perform a default (\"Recommended\")\n" "installation or if you want to have greater control (\"Expert\"). You can\n" "also choose to do a new install or an upgrade of an existing Mandrake Linux\n" "system:\n" "\n" " * \"Install\": completely wipes out the old system. In fact, depending on\n" "what currently holds your machine, you will be able to keep some old (Linux\n" "or other) partitions unchanged;\n" "\n" " * \"Upgrade\": this installation class allows to simply update the\n" "packages currently installed on your Mandrake Linux system. It keeps the\n" "current partitions of your hard drives as well as user configurations. All\n" "other configuration steps remain available with respect to plain\n" "installation;\n" "\n" " * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n" "existing Mandrake Linux system while keeping all system configurations\n" "unchanged. Adding new packages to the current installation is also\n" "possible.\n" "\n" "Upgrades should work fine for Mandrake Linux systems starting from \"8.1\"\n" "release.\n" "\n" "Depending on your knowledge of GNU/Linux, select one of the following\n" "choices:\n" "\n" " * Recommended: choose this if you have never installed a GNU/Linux\n" "operating system. The installation will be very easy and you will only be\n" "asked a few questions;\n" "\n" " * Expert: if you have a good knowledge of GNU/Linux, you can choose this\n" "installation class. The expert installation will allow you to perform a\n" "highly-customized installation. Answering some of the questions can be\n" "difficult if you do not have a good knowledge of GNU/Linux, so do not\n" "choose this unless you know what you are doing." msgstr "" "�� \"��\" �� " "�� Mandrake Linux\n" "� �� .\n" "\n" "\n" "�� \"��\" �� " "�� Mandrake Linux\n" "\n" "\n" "�� GNU/Linux, �� " "�� \n" "� �� Mandrake Linux:\n" "\n" "* ��: �� GNU/Linux ��. � " "�� \n" " �� .\n" "\n" "\n" "* ��: �� GNU/Linux, �� " "�� \n" " (��, �� ) �� . �� " "�� \n" " ��, �� " "�� GNU/Linux.\n" "\n" "\n" "* ��: �� GNU/Linux. �� , �� " "�� \n" " �� . �� " "�� ,\n" " �� " "�� .\n" " �� ." #: ../../help.pm_.c:584 msgid "" "Normally, DrakX selects the right keyboard for you (depending on the\n" "language you have chosen) and you won't even see this step. However, you\n" "might not have a keyboard that corresponds exactly to your language: for\n" "example, if you are an English speaking Swiss person, you may still want\n" "your keyboard to be a Swiss keyboard. Or if you speak English but are\n" "located in Quebec, you may find yourself in the same situation. In both\n" "cases, you will have to go back to this installation step and select an\n" "appropriate keyboard from the list.\n" "\n" "Click on the \"More\" button to be presented with the complete list of\n" "supported keyboards." msgstr "" #: ../../help.pm_.c:597 msgid "" "Please choose your preferred language for installation and system usage.\n" "\n" "Clicking on the \"Advanced\" button will allow you to select other\n" "languages to be installed on your workstation. Selecting other languages\n" "will install the language-specific files for system documentation and\n" "applications. For example, if you will host users from Spain on your\n" "machine, select English as the main language in the tree view and in the\n" "Advanced section click on the box corresponding to \"Spanish|Spain\".\n" "\n" "Note that multiple languages may be installed. Once you have selected any\n" "additional locales, click the \"OK\" button to continue." msgstr "" #: ../../help.pm_.c:610 msgid "" "DrakX generally detects the number of buttons your mouse has. If not, it\n" "assumes you have a two-button mouse and will set it up for third-button\n" "emulation. DrakX will automatically know whether it is a PS/2, serial or\n" "USB mouse.\n" "\n" "If you wish to specify a different type of mouse select the appropriate\n" "type from the provided list.\n" "\n" "If you choose a mouse other than the default, a test screen will be\n" "displayed. Use the buttons and wheel to verify that the settings are\n" "correct. If the mouse is not working well, press the space bar or [Return]\n" "to \"Cancel\" and choose again." msgstr "" #: ../../help.pm_.c:624 #, fuzzy msgid "" "Please select the correct port. For example, the \"COM1\" port under\n" "Windows is named \"ttyS0\" under GNU/Linux." msgstr "" "�� . �� ,\n" "� COM1 �� Windows �� ttyS0 �� GNU/Linux." #: ../../help.pm_.c:628 msgid "" "This is the most crucial decision point for the security of your GNU/Linux\n" "system: you have to enter the \"root\" password. \"root\" is the system\n" "administrator and is the only one authorized to make updates, add users,\n" "change the overall system configuration, and so on. In short, \"root\" can\n" "do everything! That is why you must choose a password that is difficult to\n" "guess - DrakX will tell you if it is too easy. As you can see, you can\n" "choose not to enter a password, but we strongly advise you against this if\n" "only for one reason: do not think that because you booted GNU/Linux that\n" "your other operating systems are safe from mistakes. Since \"root\" can\n" "overcome all limitations and unintentionally erase all data on partitions\n" "by carelessly accessing the partitions themselves, it is important for it\n" "to be difficult to become \"root\".\n" "\n" "The password should be a mixture of alphanumeric characters and at least 8\n" "characters long. Never write down the \"root\" password - it makes it too\n" "easy to compromise a system.\n" "\n" "However, please do not make the password too long or complicated because\n" "you must be able to remember it without too much effort.\n" "\n" "The password will not be displayed on screen as you type it in. Hence, you\n" "will have to type the password twice to reduce the chance of a typing\n" "error. If you do happen to make the same typing error twice, this\n" "``incorrect'' password will have to be used the first time you connect.\n" "\n" "In Expert mode, you will be asked if you will be connecting to an\n" "authentication server, like NIS or LDAP.\n" "\n" "If your network uses the LDAP (or NIS) protocol for authentication, select\n" "\"LDAP\" (or \"NIS\") as authentication. If you do not know, ask your\n" "network administrator.\n" "\n" "If your computer is not connected to any administrated network, you will\n" "want to choose \"Local files\" for authentication." msgstr "" #: ../../help.pm_.c:664 msgid "" "LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n" "automated. In fact, DrakX analyzes the disk boot sector and acts\n" "accordingly, depending on what it finds here:\n" "\n" " * if a Windows boot sector is found, it will replace it with a grub/LILO\n" "boot sector. Hence, you will be able to load either GNU/Linux or another\n" "OS;\n" "\n" " * if a grub or LILO boot sector is found, it will replace it with a new\n" "one.\n" "\n" "If in doubt, DrakX will display a dialog with various options.\n" "\n" " * \"Bootloader to use\": you have three choices:\n" "\n" " * \"GRUB\": if you prefer grub (text menu).\n" "\n" " * \"LILO with graphical menu\": if you prefer LILO with its graphical\n" "interface.\n" "\n" " * \"LILO with text menu\": if you prefer LILO with its text menu\n" "interface.\n" "\n" " * \"Boot device\": in most cases, you will not change the default\n" "(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n" "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n" "\n" " * \"Delay before booting the default image\": when rebooting the computer,\n" "this is the delay granted to the user to choose - in the bootloader menu,\n" "another boot entry than the default one.\n" "\n" "!! Beware that if you choose not to install a bootloader (by selecting\n" "\"Cancel\" here), you must ensure that you have a way to boot your Mandrake\n" "Linux system! Also, be sure you know what you do before changing any of the\n" "options. !!\n" "\n" "Clicking the \"Advanced\" button in this dialog will offer many advanced\n" "options, which are reserved to the expert user.\n" "\n" "After you have configured the general bootloader parameters, the list of\n" "boot options which will be available at boot time will be displayed.\n" "\n" "If there is another operating system installed on your machine, it will\n" "automatically be added to the boot menu. Here, you can choose to fine-tune\n" "the existing options. Select an entry and click \"Modify\" to modify or\n" "remove it; \"Add\" creates a new entry; and \"Done\" goes on to the next\n" "installation step." msgstr "" #: ../../help.pm_.c:713 #, fuzzy msgid "" "LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n" "either GNU/Linux or any other operating system present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful to choose the correct parameters.\n" "\n" "You may also not want to give access to these other operating systems to\n" "anyone. In which case, you can delete the corresponding entries. But then,\n" "you will need a boot disk in order to boot those other operating systems!" msgstr "" "�� LILO �� Grub �� : �� \n" "�� GNU/Linux � �� . " "��, \n" "�� . �� " "�� \n" "��, �� . \n" "�� .\n" "\n" "�� " "��\n" "�� . �� , �� " "�� \n" "�� !" #: ../../help.pm_.c:724 #, fuzzy msgid "" "You must indicate where you wish to place the information required to boot\n" "to GNU/Linux.\n" "\n" "Unless you know exactly what you are doing, choose \"First sector of drive\n" "(MBR)\"." msgstr "" "�� \n" "�� \n" "GNU/Linux.\n" "\n" "\n" "�� , �� \"�� \n" "�� (MBR)\"." #: ../../help.pm_.c:731 msgid "" "Here, we select a printing system for your computer. Other OSs may offer\n" "you one, but Mandrake Linux offers three.\n" "\n" " * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n" "a direct connection to your printer and you want to be able to panic out of\n" "printer jams, and you do not have networked printers. It will handle only\n" "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n" "if this is your maiden voyage to GNU/Linux. You can change your choices\n" "after installation by running PrinterDrake from the Mandrake Control Center\n" "and clicking the expert button.\n" "\n" " * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n" "your local printer and also halfway-around the planet. It is simple and can\n" "act as a server or a client for the ancient \"lpd\" printing system. Hence,\n" "it is compatible with the systems that went before. It can do many tricks,\n" "but the basic setup is almost as easy as \"pdq\". If you need this to\n" "emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n" "graphical front-ends for printing or choosing printer options.\n" "\n" " * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n" "approximately the same things the others can do, but it will print to\n" "printers mounted on a Novell Network, because it supports the IPX protocol,\n" "and it can print directly to shell commands. If you have need of Novell or\n" "printing to commands without using a separate pipe construct, use lprNG.\n" "Otherwise, CUPS is preferable as it is simpler and better at working over\n" "networks." msgstr "" #: ../../help.pm_.c:759 #, fuzzy msgid "" "DrakX now detects any IDE device present in your computer. It will also\n" "scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n" "found, DrakX will automatically install the appropriate driver.\n" "\n" "Because hardware detection does not always detect a piece of hardware,\n" "DrakX will ask you to confirm if a PCI SCSI card is present. Click \"Yes\"\n" "if you know that there is a SCSI card installed in your machine. You will\n" "be presented a list of SCSI cards to choose from. Click \"No\" if you have\n" "no SCSI hardware. If you are unsure, you can check the list of hardware\n" "detected in your machine by selecting \"See hardware info\" and clicking\n" "\"OK\". Examine the list of hardware and then click on the \"OK\" button to\n" "return to the SCSI interface question.\n" "\n" "If you have to manually specify your adapter, DrakX will ask if you want to\n" "specify options for it. You should allow DrakX to probe the hardware for\n" "the card-specific options which the hardware needs to initialize. This\n" "usually works well.\n" "\n" "If DrakX is not able to probe for the options which need to be passed, you\n" "will need to provide options to the driver manually. Please review the\n" "``User Guide'' (chapter 3, in the ``Collecting Information on Your\n" "Hardware'' section) for hints on retrieving the parameters required from\n" "hardware documentation, from the manufacturer's web site (if you have\n" "Internet access) or from Microsoft Windows (if you used this hardware with\n" "Windows on your system)." msgstr "" "�� DrakX �� SCSI �� PCI.\n" "�� DrakX �� " "��,\n" "�� \n" "\n" "\n" "�� SCSI �� ISA, �� PCI " "�� \n" "� �� SCSI, �� DrakX �� " "�� \n" "�� SCSI �� . �� , �� '��'. �� " "��\n" "'��', �� .\n" "\n" "\n" "�� , �� DrakX �� " "��.\n" "��, �� DrakX �� , �� " "�� .\n" "\n" "\n" "�� , �� . \n" "�� \n" "�� Windows (�� ), �� " "��\n" "�� (�� " "Internet)." #: ../../help.pm_.c:786 #, fuzzy msgid "" "You can add additional entries for yaboot, either for other operating\n" "systems, alternate kernels, or for an emergency boot image.\n" "\n" "For other OSs, the entry consists only of a label and the \"root\"\n" "partition.\n" "\n" "For Linux, there are a few possible options:\n" "\n" " * Label: this is simply the name you will have to type at the yaboot\n" "prompt to select this boot option;\n" "\n" " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n" "or a variation of vmlinux with an extension;\n" "\n" " * Root: the \"root\" device or ``/'' for your Linux installation;\n" "\n" " * Append: on Apple hardware, the kernel append option is used quite often\n" "to assist in initializing video hardware, or to enable keyboard mouse\n" "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n" "Apple mouse. The following are some examples:\n" "\n" " video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n" "hda=autotune\n" "\n" " video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n" "\n" " * Initrd: this option can be used either to load initial modules, before\n" "the boot device is available, or to load a ramdisk image for an emergency\n" "boot situation;\n" "\n" " * Initrd-size: the default ramdisk size is generally 4,096 bytes. If you\n" "need to allocate a large ramdisk, this option can be used;\n" "\n" " * Read-write: normally the \"root\" partition is initially brought up in\n" "read-only, to allow a file system check before the system becomes ``live''.\n" "Here, you can override this option;\n" "\n" " * NoVideo: should the Apple video hardware prove to be exceptionally\n" "problematic, you can select this option to boot in ``novideo'' mode, with\n" "native frame buffer support;\n" "\n" " * Default: selects this entry as being the default Linux selection,\n" "selectable by just pressing ENTER at the yaboot prompt. This entry will\n" "also be highlighted with a ``*'', if you press [Tab] to see the boot\n" "selections." msgstr "" "You can add additional entries for yaboot, either for other operating " "systems,\n" "alternate kernels, or for an emergency boot image.\n" "\n" "\n" "For other OS's - the entry consists only of a label and the root partition.\n" "\n" "\n" "For Linux, there are a few possible options: \n" "\n" "\n" " - Label: This is simply the name will type at the yaboot prompt to select " "this \n" "boot option.\n" "\n" "\n" " - Image: This would be the name of the kernel to boot. Typically vmlinux " "or\n" "a variation of vmlinux with an extension.\n" "\n" "\n" " - Root: The root device or '/' for your Linux installation.\n" "\n" "\n" " \n" " - Append: On Apple hardware, the kernel append option is used quite often " "to\n" "assist in initializing video hardware, or to enable keyboard mouse button " "emulation\n" "for the often lacking 2nd and 3rd mouse buttons on a stock Apple mouse. The " "following \n" "are some examples:\n" "\n" "\n" "\t video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 " "hda=autotune\n" "\n" "\t video=atyfb:vmode:12,cmode:24 adb_buttons=103,111 \n" "\n" "\n" " \n" " - Initrd: This option can be used either to load initial modules, before " "the boot \n" "device is available, or to load a ramdisk image for an emergency boot " "situation.\n" "\n" "\n" " - Initrd-size: The default ramdisk size is generally 4096 bytes. If you " "should need\n" "to allocate a large ramdisk, this option can be used.\n" "\n" "\n" " - Read-write: Normally the 'root' partition is initially brought up read-" "only, to allow\n" "a filesystem check before the system becomes 'live'. You can override this " "option here.\n" "\n" "\n" " - NoVideo: Should the Apple video hardware prove to be exceptionally " "problematic, you can\n" "select this option to boot in 'novideo' mode, with native framebuffer " "support.\n" "\n" "\n" " - Default: Selects this entry as being the default Linux selection, " "selectable by just\n" "pressing ENTER at the yaboot prompt. This entry will also be highlighted " "with a '*', if you\n" "press TAB to see the boot selections." #: ../../help.pm_.c:833 #, fuzzy msgid "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n" "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n" "these other operating systems are correctly detected and installed. If this\n" "is not the case, you can add an entry by hand in this screen. Be careful to\n" "choose the correct parameters.\n" "\n" "Yaboot's main options are:\n" "\n" " * Init Message: a simple text message displayed before the boot prompt;\n" "\n" " * Boot Device: indicates where you want to place the information required\n" "to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n" "to hold this information;\n" "\n" " * Open Firmware Delay: unlike LILO, there are two delays available with\n" "yaboot. The first delay is measured in seconds and at this point, you can\n" "choose between CD, OF boot, MacOS or Linux;\n" "\n" " * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n" "After selecting Linux, you will have this delay in 0.1 second before your\n" "default kernel description is selected;\n" "\n" " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n" "at the first boot prompt;\n" "\n" " * Enable OF Boot?: checking this option allows you to choose ``N'' for\n" "Open Firmware at the first boot prompt;\n" "\n" " * Default OS: you can select which OS will boot by default when the Open\n" "Firmware Delay expires." msgstr "" "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able\n" "to boot either GNU/Linux, MacOS, or MacOSX, if present on your computer.\n" "Normally, these other operating systems are correctly detected and\n" "installed. If this is not the case, you can add an entry by hand in this\n" "screen. Be careful as to choose the correct parameters.\n" "\n" "\n" "Yaboot main options are:\n" "\n" "\n" " - Init Message: A simple text message that is displayed before the boot\n" "prompt.\n" "\n" "\n" " - Boot Device: Indicate where you want to place the information required " "to \n" "boot to GNU/Linux. Generally, you will have setup a bootstrap partition " "earlier \n" "to hold this information.\n" "\n" "\n" " - Open Firmware Delay: Unlike LILO, there are two delays available with \n" "yaboot. The first delay is measured in seconds and at this point you can \n" "choose between CD, OF boot, MacOS, or Linux.\n" "\n" "\n" " - Kernel Boot Timeout: This timeout is similar to the LILO boot delay. " "After \n" "selecting Linux, you will have this delay in 0.1 seconds before your " "default\n" "kernel description is selected.\n" "\n" "\n" " - Enable CD Boot?: Checking this option will allow you to choose 'C' for " "CD at\n" "the first boot prompt.\n" "\n" "\n" " - Enable OF Boot?: Checking this option will allow you to choose 'N' for " "Open\n" "Firmware at the first boot prompt.\n" "\n" "\n" " - Default OS: You can select which OS will boot by default when the Open " "Firmware \n" "Delay expires." #: ../../help.pm_.c:865 msgid "" "Here are presented various parameters concerning your machine. Depending on\n" "your installed hardware, you may - or not, see the following entries:\n" "\n" " * \"Mouse\": check the current mouse configuration and click on the button\n" "to change it if necessary;\n" "\n" " * \"Keyboard\": check the current keyboard map configuration and click on\n" "the button to change that if necessary;\n" "\n" " * \"Timezone\": DrakX, by default, guesses your time zone from the\n" "language you have chosen. But here again, as for the choice of a keyboard,\n" "you may not be in the country for which the chosen language should\n" "correspond. Hence, you may need to click on the \"Timezone\" button in\n" "order to configure the clock according to the time zone you are in;\n" "\n" " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n" "configuration wizard;\n" "\n" " * \"Sound card\": if a sound card is detected on your system, it is\n" "displayed here. No modification possible at installation time;\n" "\n" " * \"TV card\": if a TV card is detected on your system, it is displayed\n" "here. No modification possible at installation time;\n" "\n" " * \"ISDN card\": if an ISDN card is detected on your system, it is\n" "displayed here. You can click on the button to change the parameters\n" "associated with it." msgstr "" #: ../../help.pm_.c:894 #, fuzzy msgid "" "Choose the hard drive you want to erase in order to install your new\n" "Mandrake Linux partition. Be careful, all data present on it will be lost\n" "and will not be recoverable!" msgstr "" "�� \n" "�� Mandrake Linux. ��: �� \n" "�� ." #: ../../help.pm_.c:899 #, fuzzy msgid "" "Click on \"OK\" if you want to delete all data and partitions present on\n" "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n" "to recover any data and partitions present on this hard drive, including\n" "any Windows data.\n" "\n" "Click on \"Cancel\" to cancel this operation without losing any data and\n" "partitions present on this hard drive." msgstr "" "�� \"OK\" �� \n" "�� . ��, �� \n" "�� \n" "��, �� Windows.\n" "\n" "\n" "�� \"��\" �� \n" "�� ." #: ../../install2.pm_.c:111 #, c-format msgid "" "Can't access kernel modules corresponding to your kernel (file %s is " "missing), this generally means your boot floppy in not in sync with the " "Installation medium (please create a newer boot floppy)" msgstr "" #: ../../install2.pm_.c:167 #, c-format msgid "You must also format %s" msgstr "" #: ../../install_any.pm_.c:418 #, c-format msgid "" "You have selected the following server(s): %s\n" "\n" "\n" "These servers are activated by default. They don't have any known security\n" "issues, but some new could be found. In that case, you must make sure to " "upgrade\n" "as soon as possible.\n" "\n" "\n" "Do you really want to install these servers?\n" msgstr "" "�� : %s\n" "\n" "\n" "�� ' ��. �� " "��\n" "��, �� . �� , " "�� \n" "�� .\n" "\n" "\n" "�� ;\n" #: ../../install_any.pm_.c:453 msgid "Can't use broadcast with no NIS domain" msgstr "�� broadcast �� NIS domain" #: ../../install_any.pm_.c:841 #, c-format msgid "Insert a FAT formatted floppy in drive %s" msgstr "�� FAT �� %s" #: ../../install_any.pm_.c:845 msgid "This floppy is not FAT formatted" msgstr "�� FAT" #: ../../install_any.pm_.c:857 msgid "" "To use this saved packages selection, boot installation with ``linux " "defcfg=floppy''" msgstr "" "�� , �� " "�� ``linux defcfg=floppy''" #: ../../install_any.pm_.c:880 ../../partition_table.pm_.c:771 #, c-format msgid "Error reading file %s" msgstr "�� %s" #: ../../install_interactive.pm_.c:23 #, c-format msgid "" "Some hardware on your computer needs ``proprietary'' drivers to work.\n" "You can find some information about them at: %s" msgstr "" "�� ``��'' �� " "��.\n" "�� : %s" #: ../../install_interactive.pm_.c:58 msgid "" "You must have a root partition.\n" "For this, create a partition (or click on an existing one).\n" "Then choose action ``Mount point'' and set it to `/'" msgstr "" "�� .\n" "��o�� .\n" "�� `/'" #: ../../install_interactive.pm_.c:63 msgid "You must have a swap partition" msgstr "�� swap" #: ../../install_interactive.pm_.c:64 msgid "" "You don't have a swap partition.\n" "\n" "Continue anyway?" msgstr "" "�� swap\n" "\n" "�� ;" #: ../../install_interactive.pm_.c:67 ../../install_steps.pm_.c:168 msgid "You must have a FAT partition mounted in /boot/efi" msgstr "�� FAT mounted �� /boot/efi" #: ../../install_interactive.pm_.c:91 msgid "Use free space" msgstr "�� " #: ../../install_interactive.pm_.c:93 msgid "Not enough free space to allocate new partitions" msgstr "�� " #: ../../install_interactive.pm_.c:101 msgid "Use existing partitions" msgstr "�� " #: ../../install_interactive.pm_.c:103 msgid "There is no existing partition to use" msgstr "�� " #: ../../install_interactive.pm_.c:110 msgid "Use the Windows partition for loopback" msgstr "�� Windows �� loopback" #: ../../install_interactive.pm_.c:113 msgid "Which partition do you want to use for Linux4Win?" msgstr "�� Linux4Win;" #: ../../install_interactive.pm_.c:115 msgid "Choose the sizes" msgstr "�� " #: ../../install_interactive.pm_.c:116 msgid "Root partition size in MB: " msgstr "�� MB:" #: ../../install_interactive.pm_.c:117 msgid "Swap partition size in MB: " msgstr "�� swap �� MB" #: ../../install_interactive.pm_.c:126 msgid "Use the free space on the Windows partition" msgstr "�� Windows" #: ../../install_interactive.pm_.c:129 msgid "Which partition do you want to resize?" msgstr "�� ;" #: ../../install_interactive.pm_.c:131 msgid "Resizing Windows partition" msgstr "�� Windows" #: ../../install_interactive.pm_.c:134 #, c-format msgid "" "The FAT resizer is unable to handle your partition, \n" "the following error occured: %s" msgstr "" "�� FAT, \n" "�� : %s" #: ../../install_interactive.pm_.c:137 msgid "" "Your Windows partition is too fragmented. Please reboot your computer under " "Windows, run the ``defrag'' utility, then restart the Mandrake Linux " "installation." msgstr "" "� �� Windows �� , �� " "�� ``defrag'' " #: ../../install_interactive.pm_.c:138 #, fuzzy msgid "" "WARNING!\n" "\n" "DrakX will now resize your Windows partition. Be careful:\n" "this operation is dangerous. If you have not already done\n" "so, you should first exit the installation, run scandisk\n" "under Windows (and optionally run defrag), then restart the\n" "installation. You should also backup your data.\n" "When sure, press Ok." msgstr "" "��!\n" "\n" "�� DrakX �� Windows.\n" "� �� . �� ,\n" "�� (��\n" "scandisk) �� (defragment).\n" "�� .\n" "�� , �� Ok." #: ../../install_interactive.pm_.c:148 msgid "Which size do you want to keep for Windows on" msgstr "�� windows ��" #: ../../install_interactive.pm_.c:149 #, c-format msgid "partition %s" msgstr "�� %s" #: ../../install_interactive.pm_.c:156 #, c-format msgid "FAT resizing failed: %s" msgstr "�� FAT ��: %s" #: ../../install_interactive.pm_.c:171 msgid "" "There is no FAT partition to resize or to use as loopback (or not enough " "space left)" msgstr "" "�� FAT �� loopback (� " "�� )" #: ../../install_interactive.pm_.c:177 msgid "Erase entire disk" msgstr "�� " #: ../../install_interactive.pm_.c:177 msgid "Remove Windows(TM)" msgstr "�� Windows(TM)" #: ../../install_interactive.pm_.c:180 msgid "You have more than one hard drive, which one do you install linux on?" msgstr "" "�� , �� " "Linux;" #: ../../install_interactive.pm_.c:183 #, c-format msgid "ALL existing partitions and their data will be lost on drive %s" msgstr "" "�� %s �� " #: ../../install_interactive.pm_.c:191 msgid "Custom disk partitioning" msgstr "�� " #: ../../install_interactive.pm_.c:195 msgid "Use fdisk" msgstr "�� fdisk" #: ../../install_interactive.pm_.c:198 #, c-format msgid "" "You can now partition %s.\n" "When you are done, don't forget to save using `w'" msgstr "" "�� %s\n" "�� , �� `w'" #: ../../install_interactive.pm_.c:227 msgid "You don't have enough free space on your Windows partition" msgstr "�� Windows" #: ../../install_interactive.pm_.c:243 msgid "I can't find any room for installing" msgstr "�� " #: ../../install_interactive.pm_.c:246 msgid "The DrakX Partitioning wizard found the following solutions:" msgstr "�� DrakX �� :" #: ../../install_interactive.pm_.c:250 #, c-format msgid "Partitioning failed: %s" msgstr "� �� : %s" #: ../../install_interactive.pm_.c:260 msgid "Bringing up the network" msgstr "�� " #: ../../install_interactive.pm_.c:265 msgid "Bringing down the network" msgstr "�� ." #: ../../install_steps.pm_.c:76 msgid "" "An error occurred, but I don't know how to handle it nicely.\n" "Continue at your own risk." msgstr "" "�� .\n" "�� (�� " "Internet).�� ." #: ../../install_steps.pm_.c:210 #, c-format msgid "Duplicate mount point %s" msgstr "�� %s" #: ../../install_steps.pm_.c:379 msgid "" "Some important packages didn't get installed properly.\n" "Either your cdrom drive or your cdrom is defective.\n" "Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm" "\"\n" msgstr "" "�� .\n" "� �� CD-ROM � �� CD-ROM �� .\n" "�� CD-ROM �� \"rpm -qpl " "Mandrake/RPMS/*.rpm\"\n" #: ../../install_steps.pm_.c:451 #, c-format msgid "Welcome to %s" msgstr "�� %s" #: ../../install_steps.pm_.c:530 ../../install_steps.pm_.c:770 msgid "No floppy drive available" msgstr "�� " #: ../../install_steps_auto_install.pm_.c:76 #: ../../install_steps_stdio.pm_.c:22 #, c-format msgid "Entering step `%s'\n" msgstr "�� `%s'\n" #: ../../install_steps_gtk.pm_.c:150 msgid "" "Your system is low on resources. You may have some problem installing\n" "Mandrake Linux. If that occurs, you can try a text install instead. For " "this,\n" "press `F1' when booting on CDROM, then enter `text'." msgstr "" "�� . �� " "��\n" "�� Mandrake Linux. �� , �� " "�� .\n" "�� F1 �� CDROM, �� `text'." #: ../../install_steps_gtk.pm_.c:161 ../../install_steps_interactive.pm_.c:231 msgid "Install Class" msgstr "�� " #: ../../install_steps_gtk.pm_.c:164 #, fuzzy msgid "Please choose one of the following classes of installation:" msgstr "�� " #: ../../install_steps_gtk.pm_.c:243 ../../install_steps_interactive.pm_.c:694 msgid "Package Group Selection" msgstr "�� " #: ../../install_steps_gtk.pm_.c:276 ../../install_steps_interactive.pm_.c:709 msgid "Individual package selection" msgstr "�� " #: ../../install_steps_gtk.pm_.c:299 ../../install_steps_interactive.pm_.c:633 #, c-format msgid "Total size: %d / %d MB" msgstr "�� : %d / %d MB" #: ../../install_steps_gtk.pm_.c:341 msgid "Bad package" msgstr "�� " #: ../../install_steps_gtk.pm_.c:342 #, c-format msgid "Name: %s\n" msgstr "��: %s\n" #: ../../install_steps_gtk.pm_.c:343 #, c-format msgid "Version: %s\n" msgstr "��: %s\n" #: ../../install_steps_gtk.pm_.c:344 #, c-format msgid "Size: %d KB\n" msgstr "��: %d KB\n" #: ../../install_steps_gtk.pm_.c:345 #, c-format msgid "Importance: %s\n" msgstr "��: %s\n" #: ../../install_steps_gtk.pm_.c:367 msgid "" "You can't select this package as there is not enough space left to install it" msgstr "" "�� " #: ../../install_steps_gtk.pm_.c:372 msgid "The following packages are going to be installed" msgstr "�� " #: ../../install_steps_gtk.pm_.c:373 msgid "The following packages are going to be removed" msgstr "�� " #: ../../install_steps_gtk.pm_.c:385 msgid "You can't select/unselect this package" msgstr "�� /�� " #: ../../install_steps_gtk.pm_.c:397 msgid "This is a mandatory package, it can't be unselected" msgstr "�� , �� " #: ../../install_steps_gtk.pm_.c:399 msgid "You can't unselect this package. It is already installed" msgstr "�� . �� " #: ../../install_steps_gtk.pm_.c:402 msgid "" "This package must be upgraded.\n" "Are you sure you want to deselect it?" msgstr "" "�� \n" "�� ;" #: ../../install_steps_gtk.pm_.c:405 msgid "You can't unselect this package. It must be upgraded" msgstr "�� . �� " #: ../../install_steps_gtk.pm_.c:410 msgid "Show automatically selected packages" msgstr "�� " #: ../../install_steps_gtk.pm_.c:411 ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 #: ../../standalone/drakbackup_.c:3600 msgid "Install" msgstr "��" #: ../../install_steps_gtk.pm_.c:414 msgid "Load/Save on floppy" msgstr "��/�� " #: ../../install_steps_gtk.pm_.c:415 msgid "Updating package selection" msgstr "�� " #: ../../install_steps_gtk.pm_.c:420 msgid "Minimal install" msgstr "�� " #: ../../install_steps_gtk.pm_.c:435 ../../install_steps_interactive.pm_.c:538 msgid "Choose the packages you want to install" msgstr "�� " #: ../../install_steps_gtk.pm_.c:451 ../../install_steps_interactive.pm_.c:778 msgid "Installing" msgstr "��" #: ../../install_steps_gtk.pm_.c:457 msgid "Estimating" msgstr "��" #: ../../install_steps_gtk.pm_.c:464 msgid "Time remaining " msgstr "�� " #: ../../install_steps_gtk.pm_.c:476 msgid "Please wait, preparing installation..." msgstr "�� , �� " #: ../../install_steps_gtk.pm_.c:560 #, c-format msgid "%d packages" msgstr "%d ��" #: ../../install_steps_gtk.pm_.c:565 #, c-format msgid "Installing package %s" msgstr "�� %s" #: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:802 #: ../../standalone/drakautoinst_.c:202 msgid "Accept" msgstr "��" #: ../../install_steps_gtk.pm_.c:602 ../../install_steps_interactive.pm_.c:189 #: ../../install_steps_interactive.pm_.c:802 msgid "Refuse" msgstr "��" #: ../../install_steps_gtk.pm_.c:603 ../../install_steps_interactive.pm_.c:803 #, c-format msgid "" "Change your Cd-Rom!\n" "\n" "Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when " "done.\n" "If you don't have it, press Cancel to avoid installation from this Cd-Rom." msgstr "" "�� Cd-Rom!\n" "\n" "�� Cd-Rom �� \"%s\" �� .\n" "�� , �� CdRom." #: ../../install_steps_gtk.pm_.c:617 ../../install_steps_gtk.pm_.c:621 #: ../../install_steps_interactive.pm_.c:815 #: ../../install_steps_interactive.pm_.c:819 msgid "Go on anyway?" msgstr "�� ;" #: ../../install_steps_gtk.pm_.c:617 ../../install_steps_interactive.pm_.c:815 msgid "There was an error ordering packages:" msgstr "�� :" #: ../../install_steps_gtk.pm_.c:621 ../../install_steps_interactive.pm_.c:819 msgid "There was an error installing packages:" msgstr "�� :" #: ../../install_steps_interactive.pm_.c:10 msgid "" "\n" "Warning\n" "\n" "Please read carefully the terms below. If you disagree with any\n" "portion, you are not allowed to install the next CD media. Press 'Refuse' \n" "to continue the installation without using these media.\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" msgstr "" "\n" "��\n" "\n" "�� . �� \n" "�� , �� " "CD. �� \n" "'��' �� .\n" "\n" "\n" "Some components contained in the next CD media are not governed\n" "by the GPL License or similar agreements. Each such component is then\n" "governed by the terms and conditions of its own specific license. \n" "Please read carefully and comply with such specific licenses before \n" "you use or redistribute the said components. \n" "Such licenses will in general prevent the transfer, duplication \n" "(except for backup purposes), redistribution, reverse engineering, \n" "de-assembly, de-compilation or modification of the component. \n" "Any breach of agreement will immediately terminate your rights under \n" "the specific license. Unless the specific license terms grant you such\n" "rights, you usually cannot install the programs on more than one\n" "system, or adapt it to be used on a network. In doubt, please contact \n" "directly the distributor or editor of the component. \n" "Transfer to third parties or copying of such components including the \n" "documentation is usually forbidden.\n" "\n" "\n" "All rights to the components of the next CD media belong to their \n" "respective authors and are protected by intellectual property and \n" "copyright laws applicable to software programs.\n" #: ../../install_steps_interactive.pm_.c:67 msgid "An error occurred" msgstr "�� " #: ../../install_steps_interactive.pm_.c:85 #, fuzzy msgid "Do you really want to leave the installation?" msgstr "�� ;" #: ../../install_steps_interactive.pm_.c:112 msgid "License agreement" msgstr "�� " #: ../../install_steps_interactive.pm_.c:113 msgid "" "Introduction\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" msgstr "" "��\n" "\n" "The operating system and the different components available in the Mandrake " "Linux distribution \n" "shall be called the \"Software Products\" hereafter. The Software Products " "include, but are not \n" "restricted to, the set of programs, methods, rules and documentation related " "to the operating \n" "system and the different components of the Mandrake Linux distribution.\n" "\n" "\n" "1. License Agreement\n" "\n" "Please read this document carefully. This document is a license agreement " "between you and \n" "MandrakeSoft S.A. which applies to the Software Products.\n" "By installing, duplicating or using the Software Products in any manner, you " "explicitly \n" "accept and fully agree to conform to the terms and conditions of this " "License. \n" "If you disagree with any portion of the License, you are not allowed to " "install, duplicate or use \n" "the Software Products. \n" "Any attempt to install, duplicate or use the Software Products in a manner " "which does not comply \n" "with the terms and conditions of this License is void and will terminate " "your rights under this \n" "License. Upon termination of the License, you must immediately destroy all " "copies of the \n" "Software Products.\n" "\n" "\n" "2. Limited Warranty\n" "\n" "The Software Products and attached documentation are provided \"as is\", " "with no warranty, to the \n" "extent permitted by law.\n" "MandrakeSoft S.A. will, in no circumstances and to the extent permitted by " "law, be liable for any special,\n" "incidental, direct or indirect damages whatsoever (including without " "limitation damages for loss of \n" "business, interruption of business, financial loss, legal fees and penalties " "resulting from a court \n" "judgment, or any other consequential loss) arising out of the use or " "inability to use the Software \n" "Products, even if MandrakeSoft S.A. has been advised of the possibility or " "occurance of such \n" "damages.\n" "\n" "LIMITED LIABILITY LINKED TO POSSESSING OR USING PROHIBITED SOFTWARE IN SOME " "COUNTRIES\n" "\n" "To the extent permitted by law, MandrakeSoft S.A. or its distributors will, " "in no circumstances, be \n" "liable for any special, incidental, direct or indirect damages whatsoever " "(including without \n" "limitation damages for loss of business, interruption of business, financial " "loss, legal fees \n" "and penalties resulting from a court judgment, or any other consequential " "loss) arising out \n" "of the possession and use of software components or arising out of " "downloading software components \n" "from one of Mandrake Linux sites which are prohibited or restricted in some " "countries by local laws.\n" "This limited liability applies to, but is not restricted to, the strong " "cryptography components \n" "included in the Software Products.\n" "\n" "\n" "3. The GPL License and Related Licenses\n" "\n" "The Software Products consist of components created by different persons or " "entities. Most \n" "of these components are governed under the terms and conditions of the GNU " "General Public \n" "Licence, hereafter called \"GPL\", or of similar licenses. Most of these " "licenses allow you to use, \n" "duplicate, adapt or redistribute the components which they cover. Please " "read carefully the terms \n" "and conditions of the license agreement for each component before using any " "component. Any question \n" "on a component license should be addressed to the component author and not " "to MandrakeSoft.\n" "The programs developed by MandrakeSoft S.A. are governed by the GPL License. " "Documentation written \n" "by MandrakeSoft S.A. is governed by a specific license. Please refer to the " "documentation for \n" "further details.\n" "\n" "\n" "4. Intellectual Property Rights\n" "\n" "All rights to the components of the Software Products belong to their " "respective authors and are \n" "protected by intellectual property and copyright laws applicable to software " "programs.\n" "MandrakeSoft S.A. reserves its rights to modify or adapt the Software " "Products, as a whole or in \n" "parts, by all means and for all purposes.\n" "\"Mandrake\", \"Mandrake Linux\" and associated logos are trademarks of " "MandrakeSoft S.A. \n" "\n" "\n" "5. Governing Laws \n" "\n" "If any portion of this agreement is held void, illegal or inapplicable by a " "court judgment, this \n" "portion is excluded from this contract. You remain bound by the other " "applicable sections of the \n" "agreement.\n" "The terms and conditions of this License are governed by the Laws of " "France.\n" "All disputes on the terms of this license will preferably be settled out of " "court. As a last \n" "resort, the dispute will be referred to the appropriate Courts of Law of " "Paris - France.\n" "For any question on this document, please contact MandrakeSoft S.A. \n" #: ../../install_steps_interactive.pm_.c:191 msgid "Are you sure you refuse the licence?" msgstr "" #: ../../install_steps_interactive.pm_.c:211 #: ../../install_steps_interactive.pm_.c:1038 #: ../../standalone/keyboarddrake_.c:31 msgid "Keyboard" msgstr "��" #: ../../install_steps_interactive.pm_.c:212 #, fuzzy msgid "Please choose your keyboard layout." msgstr "�� ." #: ../../install_steps_interactive.pm_.c:213 msgid "Here is the full list of keyboards available" msgstr "�� " #: ../../install_steps_interactive.pm_.c:231 msgid "Which installation class do you want?" msgstr "�� ;" #: ../../install_steps_interactive.pm_.c:235 msgid "Install/Update" msgstr "��/��" #: ../../install_steps_interactive.pm_.c:235 msgid "Is this an install or an update?" msgstr "�� ;" #: ../../install_steps_interactive.pm_.c:244 msgid "Recommended" msgstr "��" #: ../../install_steps_interactive.pm_.c:247 #: ../../install_steps_interactive.pm_.c:250 msgid "Expert" msgstr "�� " #: ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 #, fuzzy msgid "Upgrade" msgstr "��" #: ../../install_steps_interactive.pm_.c:255 #: ../../install_steps_interactive.pm_.c:259 #, fuzzy msgid "Upgrade packages only" msgstr "�� " #: ../../install_steps_interactive.pm_.c:275 #, fuzzy msgid "Please choose the type of your mouse." msgstr "�� ." #: ../../install_steps_interactive.pm_.c:281 ../../standalone/mousedrake_.c:59 msgid "Mouse Port" msgstr "�� " #: ../../install_steps_interactive.pm_.c:282 ../../standalone/mousedrake_.c:60 msgid "Please choose on which serial port your mouse is connected to." msgstr "" "�� ." #: ../../install_steps_interactive.pm_.c:290 msgid "Buttons emulation" msgstr "�� " #: ../../install_steps_interactive.pm_.c:292 msgid "Button 2 Emulation" msgstr "�� 2 ��" #: ../../install_steps_interactive.pm_.c:293 msgid "Button 3 Emulation" msgstr "�� 3 ��" #: ../../install_steps_interactive.pm_.c:314 msgid "Configuring PCMCIA cards..." msgstr "�� PCMCIA " #: ../../install_steps_interactive.pm_.c:314 msgid "PCMCIA" msgstr "PCMCIA" #: ../../install_steps_interactive.pm_.c:321 msgid "Configuring IDE" msgstr "�� IDE" #: ../../install_steps_interactive.pm_.c:321 msgid "IDE" msgstr "IDE" #: ../../install_steps_interactive.pm_.c:336 msgid "No partition available" msgstr "�� " #: ../../install_steps_interactive.pm_.c:339 msgid "Scanning partitions to find mount points" msgstr "�� ." #: ../../install_steps_interactive.pm_.c:347 msgid "Choose the mount points" msgstr "�� " #: ../../install_steps_interactive.pm_.c:366 #, c-format msgid "" "I can't read your partition table, it's too corrupted for me :(\n" "I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n" "The other solution is to not allow DrakX to modify the partition table.\n" "(the error is %s)\n" "\n" "Do you agree to loose all the partitions?\n" msgstr "" "�� , �� :(\n" "�� \n" "�� . � �� \n" "DrakX �� . �� : %s\n" "\n" "�� ;\n" #: ../../install_steps_interactive.pm_.c:379 msgid "" "DiskDrake failed to read correctly the partition table.\n" "Continue at your own risk!" msgstr "" "�� DiskDrake �� .\n" "�� !" #: ../../install_steps_interactive.pm_.c:396 msgid "" "No free space for 1MB bootstrap! Install will continue, but to boot your " "system, you'll need to create the bootstrap partition in DiskDrake" msgstr "" "�� 1MB bootstrap! � �� , " "�� , �� " "�� bootstrap �� DiskDrake" #: ../../install_steps_interactive.pm_.c:405 msgid "No root partition found to perform an upgrade" msgstr "�� root �� " #: ../../install_steps_interactive.pm_.c:406 msgid "Root Partition" msgstr "Root Partition (�� )" #: ../../install_steps_interactive.pm_.c:407 msgid "What is the root partition (/) of your system?" msgstr "�� (/) �� ;" #: ../../install_steps_interactive.pm_.c:421 msgid "You need to reboot for the partition table modifications to take place" msgstr "" "�� " "��" #: ../../install_steps_interactive.pm_.c:445 msgid "Choose the partitions you want to format" msgstr "�� " #: ../../install_steps_interactive.pm_.c:446 msgid "Check bad blocks?" msgstr "�� blocks;" #: ../../install_steps_interactive.pm_.c:473 msgid "Formatting partitions" msgstr "�� " #: ../../install_steps_interactive.pm_.c:475 #, c-format msgid "Creating and formatting file %s" msgstr "�� %s" #: ../../install_steps_interactive.pm_.c:480 #, c-format msgid "" "Failed to check filesystem %s. Do you want to repair the errors? (beware, " "you can loose data)" msgstr "" #: ../../install_steps_interactive.pm_.c:482 msgid "Not enough swap space to fulfill installation, please add some" msgstr "" "�� swap �� , �� " "��" #: ../../install_steps_interactive.pm_.c:489 #, fuzzy msgid "Looking for available packages and rebuilding rpm database..." msgstr "�� " #: ../../install_steps_interactive.pm_.c:490 msgid "Looking for available packages..." msgstr "�� " #: ../../install_steps_interactive.pm_.c:493 #, fuzzy msgid "Looking at packages already installed..." msgstr "�� . �� " #: ../../install_steps_interactive.pm_.c:497 msgid "Finding packages to upgrade..." msgstr "�� " #: ../../install_steps_interactive.pm_.c:515 #, c-format msgid "" "Your system does not have enough space left for installation or upgrade (%d " "> %d)" msgstr "" "�� (%" "d > %d)" #: ../../install_steps_interactive.pm_.c:550 msgid "" "Please choose load or save package selection on floppy.\n" "The format is the same as auto_install generated floppies." msgstr "" "�� " "��.\n" "� �� ." #: ../../install_steps_interactive.pm_.c:553 msgid "Load from floppy" msgstr "�� " #: ../../install_steps_interactive.pm_.c:555 msgid "Loading from floppy" msgstr "�� " #: ../../install_steps_interactive.pm_.c:555 msgid "Package selection" msgstr "�� " #: ../../install_steps_interactive.pm_.c:560 msgid "Insert a floppy containing package selection" msgstr "�� " #: ../../install_steps_interactive.pm_.c:572 msgid "Save on floppy" msgstr "�� " #: ../../install_steps_interactive.pm_.c:646 msgid "Selected size is larger than available space" msgstr "�� " #: ../../install_steps_interactive.pm_.c:660 msgid "Type of install" msgstr "" #: ../../install_steps_interactive.pm_.c:661 msgid "" "You haven't selected any group of packages.\n" "Please choose the minimal installation you want:" msgstr "" #: ../../install_steps_interactive.pm_.c:664 msgid "With X" msgstr "" #: ../../install_steps_interactive.pm_.c:666 msgid "With basic documentation (recommended!)" msgstr "" #: ../../install_steps_interactive.pm_.c:667 msgid "Truly minimal install (especially no urpmi)" msgstr "" #: ../../install_steps_interactive.pm_.c:752 msgid "" "If you have all the CDs in the list below, click Ok.\n" "If you have none of those CDs, click Cancel.\n" "If only some CDs are missing, unselect them, then click Ok." msgstr "" "�� CDs, �� Ok.\n" "�� CDs, �� .\n" "�� , �� Ok." #: ../../install_steps_interactive.pm_.c:757 #, c-format msgid "Cd-Rom labeled \"%s\"" msgstr "Cd-Rom �� \"%s\"" #: ../../install_steps_interactive.pm_.c:778 msgid "Preparing installation" msgstr "�� " #: ../../install_steps_interactive.pm_.c:787 #, c-format msgid "" "Installing package %s\n" "%d%%" msgstr "" "�� %s\n" "%d%%" #: ../../install_steps_interactive.pm_.c:833 msgid "Post-install configuration" msgstr "�� " #: ../../install_steps_interactive.pm_.c:839 #, c-format msgid "Please insert the Boot floppy used in drive %s" msgstr "�� %s" #: ../../install_steps_interactive.pm_.c:845 #, c-format msgid "Please insert the Update Modules floppy in drive %s" msgstr "�� %s" #: ../../install_steps_interactive.pm_.c:865 msgid "" "You now have the opportunity to download encryption software.\n" "\n" "WARNING:\n" "\n" "Due to different general requirements applicable to these software and " "imposed\n" "by various jurisdictions, customer and/or end user of theses software " "should\n" "ensure that the laws of his/their jurisdiction allow him/them to download, " "stock\n" "and/or use these software.\n" "\n" "In addition customer and/or end user shall particularly be aware to not " "infringe\n" "the laws of his/their jurisdiction. Should customer and/or end user not\n" "respect the provision of these applicable laws, he/they will incure serious\n" "sanctions.\n" "\n" "In no event shall Mandrakesoft nor its manufacturers and/or suppliers be " "liable\n" "for special, indirect or incidental damages whatsoever (including, but not\n" "limited to loss of profits, business interruption, loss of commercial data " "and\n" "other pecuniary losses, and eventual liabilities and indemnification to be " "paid\n" "pursuant to a court decision) arising out of use, possession, or the sole\n" "downloading of these software, to which customer and/or end user could\n" "eventually have access after having sign up the present agreement.\n" "\n" "\n" "For any queries relating to these agreement, please contact \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" msgstr "" "�� .\n" "\n" "��:\n" "\n" "�� " "��,\n" "� �� " "��,\n" "�� /� �� .\n" "\n" "� �� . �� " "�� \n" "�� , �� .\n" "\n" "�� Mandrakesoft, �� " "�� \n" "�� (�� , " "�� \n" "��, �� " "�� .\n" "\n" "�� \n" "Mandrakesoft, Inc.\n" "2400 N. Lincoln Avenue Suite 243\n" "Altadena California 91001\n" "USA" #: ../../install_steps_interactive.pm_.c:904 msgid "" "You now have the opportunity to download updated packages. These packages\n" "have been released after the distribution was released. They may\n" "contain security or bug fixes.\n" "\n" "To download these packages, you will need to have a working Internet \n" "connection.\n" "\n" "Do you want to install the updates ?" msgstr "" #: ../../install_steps_interactive.pm_.c:919 #, fuzzy msgid "" "Contacting Mandrake Linux web site to get the list of available mirrors..." msgstr "�� " #: ../../install_steps_interactive.pm_.c:924 msgid "Choose a mirror from which to get the packages" msgstr "�� " #: ../../install_steps_interactive.pm_.c:933 msgid "Contacting the mirror to get the list of available packages..." msgstr "�� " #: ../../install_steps_interactive.pm_.c:960 msgid "Which is your timezone?" msgstr "�� ;" #: ../../install_steps_interactive.pm_.c:965 msgid "Hardware clock set to GMT" msgstr "�� GMT (�� )" #: ../../install_steps_interactive.pm_.c:966 msgid "Automatic time synchronization (using NTP)" msgstr "�� (�� NTP)" #: ../../install_steps_interactive.pm_.c:973 msgid "NTP Server" msgstr "�� NTP" #: ../../install_steps_interactive.pm_.c:1007 #: ../../install_steps_interactive.pm_.c:1015 msgid "Remote CUPS server" msgstr "�� CUPS" #: ../../install_steps_interactive.pm_.c:1008 msgid "No printer" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1025 #, fuzzy msgid "Do you have an ISA sound card?" msgstr "�� ;" #: ../../install_steps_interactive.pm_.c:1027 msgid "Run \"sndconfig\" after installation to configure your sound card" msgstr "" #: ../../install_steps_interactive.pm_.c:1029 msgid "No sound card detected. Try \"harddrake\" after installation" msgstr "" #: ../../install_steps_interactive.pm_.c:1034 ../../steps.pm_.c:27 msgid "Summary" msgstr "��" #: ../../install_steps_interactive.pm_.c:1037 msgid "Mouse" msgstr "��" #: ../../install_steps_interactive.pm_.c:1039 msgid "Timezone" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1040 ../../printerdrake.pm_.c:2728 #: ../../printerdrake.pm_.c:2814 msgid "Printer" msgstr "��" #: ../../install_steps_interactive.pm_.c:1042 msgid "ISDN card" msgstr "K�� ISDN" #: ../../install_steps_interactive.pm_.c:1045 #: ../../install_steps_interactive.pm_.c:1047 msgid "Sound card" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1049 msgid "TV card" msgstr "�� TV" #: ../../install_steps_interactive.pm_.c:1089 #: ../../install_steps_interactive.pm_.c:1114 #: ../../install_steps_interactive.pm_.c:1118 msgid "LDAP" msgstr "LDAP" #: ../../install_steps_interactive.pm_.c:1090 #: ../../install_steps_interactive.pm_.c:1114 #: ../../install_steps_interactive.pm_.c:1127 msgid "NIS" msgstr "NIS" #: ../../install_steps_interactive.pm_.c:1091 #: ../../install_steps_interactive.pm_.c:1114 #: ../../install_steps_interactive.pm_.c:1135 #: ../../install_steps_interactive.pm_.c:1141 #, fuzzy msgid "Windows Domain" msgstr "�� (domain) NIS" #: ../../install_steps_interactive.pm_.c:1092 #: ../../install_steps_interactive.pm_.c:1114 msgid "Local files" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1101 #: ../../install_steps_interactive.pm_.c:1102 ../../steps.pm_.c:24 msgid "Set root password" msgstr "�� root" #: ../../install_steps_interactive.pm_.c:1103 msgid "No password" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1108 #, c-format msgid "This password is too short (it must be at least %d characters long)" msgstr "" "�� (�� %d " "�� )" #: ../../install_steps_interactive.pm_.c:1114 ../../network/modem.pm_.c:49 #: ../../standalone/drakconnect_.c:625 ../../standalone/logdrake_.c:172 msgid "Authentication" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1122 msgid "Authentication LDAP" msgstr "�� LDAP" #: ../../install_steps_interactive.pm_.c:1123 msgid "LDAP Base dn" msgstr "LDAP Base dn" #: ../../install_steps_interactive.pm_.c:1124 msgid "LDAP Server" msgstr "�� LDAP" #: ../../install_steps_interactive.pm_.c:1130 msgid "Authentication NIS" msgstr "�� NIS" #: ../../install_steps_interactive.pm_.c:1131 msgid "NIS Domain" msgstr "�� (domain) NIS" #: ../../install_steps_interactive.pm_.c:1132 msgid "NIS Server" msgstr "�� NIS" #: ../../install_steps_interactive.pm_.c:1138 msgid "" "For this to work for a W2K PDC, you will probably need to have the admin " "run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /" "add and reboot the server.\n" "You will also need the username/password of a Domain Admin to join the " "machine to the Windows(TM) domain.\n" "If networking is not yet enabled, Drakx will attempt to join the domain " "after the network setup step.\n" "Should this setup fail for some reason and domain authentication is not " "working, run 'smbpasswd -j DOMAIN -U USER%PASSWORD' using your Windows(tm) " "Domain, and Admin Username/Password, after system boot.\n" "The command 'wbinfo -t' will test whether your authentication secrets are " "good." msgstr "" #: ../../install_steps_interactive.pm_.c:1140 #, fuzzy msgid "Authentication Windows Domain" msgstr "�� LDAP" #: ../../install_steps_interactive.pm_.c:1142 #, fuzzy msgid "Domain Admin User Name" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1143 msgid "Domain Admin Password" msgstr "" #: ../../install_steps_interactive.pm_.c:1178 msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "SILO on your system, or another operating system removes SILO, or SILO " "doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures.\n" "\n" "If you want to create a bootdisk for your system, insert a floppy in the " "first\n" "drive and press \"Ok\"." msgstr "" "�� \n" "�� . �� " "�� \n" "�� SILO , �� SILO\n" "� �� SILO. �� \n" "�� " "Mandrake,\n" "�� .\n" "�� ;" #: ../../install_steps_interactive.pm_.c:1194 msgid "First floppy drive" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1195 msgid "Second floppy drive" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1196 ../../printerdrake.pm_.c:2277 msgid "Skip" msgstr "��" #: ../../install_steps_interactive.pm_.c:1201 #, c-format msgid "" "A custom bootdisk provides a way of booting into your Linux system without\n" "depending on the normal bootloader. This is useful if you don't want to " "install\n" "LILO (or grub) on your system, or another operating system removes LILO, or " "LILO doesn't\n" "work with your hardware configuration. A custom bootdisk can also be used " "with\n" "the Mandrake rescue image, making it much easier to recover from severe " "system\n" "failures. Would you like to create a bootdisk for your system?\n" "%s" msgstr "" "�� \n" "�� . �� " "�� \n" "�� LILO (� �� grub), �� " "�� LILO\n" "� �� LILO. �� \n" "�� " "Mandrake,\n" "�� .\n" "�� ;\n" "%s" #: ../../install_steps_interactive.pm_.c:1207 msgid "" "\n" "\n" "(WARNING! You're using XFS for your root partition,\n" "creating a bootdisk on a 1.44 Mb floppy will probably fail,\n" "because XFS needs a very large driver)." msgstr "" #: ../../install_steps_interactive.pm_.c:1215 msgid "Sorry, no floppy drive available" msgstr "��, �� " #: ../../install_steps_interactive.pm_.c:1219 msgid "Choose the floppy drive you want to use to make the bootdisk" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1223 #, fuzzy, c-format msgid "Insert a floppy in %s" msgstr "�� %s" #: ../../install_steps_interactive.pm_.c:1226 msgid "Creating bootdisk..." msgstr "�� " #: ../../install_steps_interactive.pm_.c:1233 msgid "Preparing bootloader..." msgstr "�� " #: ../../install_steps_interactive.pm_.c:1244 msgid "" "You appear to have an OldWorld or Unknown\n" " machine, the yaboot bootloader will not work for you.\n" "The install will continue, but you'll\n" " need to use BootX to boot your machine" msgstr "" "�� \n" " ��, � yaboot bootloader �� .\n" "� �� , ��\n" "�� BootX �� " #: ../../install_steps_interactive.pm_.c:1250 msgid "Do you want to use aboot?" msgstr "�� aboot;" #: ../../install_steps_interactive.pm_.c:1253 msgid "" "Error installing aboot, \n" "try to force installation even if that destroys the first partition?" msgstr "" "�� aboot, \n" "�� , �� " "�� ;" #: ../../install_steps_interactive.pm_.c:1260 #, fuzzy msgid "Installing bootloader" msgstr "��. ��. ��" #: ../../install_steps_interactive.pm_.c:1266 msgid "Installation of bootloader failed. The following error occured:" msgstr "" "� �� . �� " "��:" #: ../../install_steps_interactive.pm_.c:1274 #, fuzzy, c-format msgid "" "You may need to change your Open Firmware boot-device to\n" " enable the bootloader. If you don't see the bootloader prompt at\n" " reboot, hold down Command-Option-O-F at reboot and enter:\n" " setenv boot-device %s,\\\\:tbxi\n" " Then type: shut-down\n" "At your next boot you should see the bootloader prompt." msgstr "" "�� Open Firmware boot-�� \n" " �� bootloader. �� reboot �� \n" " bootloader, �� Command-Option-O-F �� reboot �� :\n" " setenv boot-device $of_boot,\\\\:tbxi\n" " �� : shut-down\n" "�� bootloader." #: ../../install_steps_interactive.pm_.c:1308 #: ../../standalone/drakautoinst_.c:79 #, c-format msgid "Insert a blank floppy in drive %s" msgstr "�� %s" #: ../../install_steps_interactive.pm_.c:1312 msgid "Creating auto install floppy..." msgstr "�� " #: ../../install_steps_interactive.pm_.c:1323 msgid "" "Some steps are not completed.\n" "\n" "Do you really want to quit now?" msgstr "" "�� .\n" "\n" "�� ;" #: ../../install_steps_interactive.pm_.c:1334 #, c-format msgid "" "Congratulations, installation is complete.\n" "Remove the boot media and press return to reboot.\n" "\n" "\n" "For information on fixes which are available for this release of Mandrake " "Linux,\n" "consult the Errata available from:\n" "\n" "\n" "%s\n" "\n" "\n" "Information on configuring your system is available in the post\n" "install chapter of the Official Mandrake Linux User's Guide." msgstr "" "��, � �� .\n" "�� CD �� return �� " "��.\n" "\n" "\n" "�� Mandrake Linux,\n" "�� \n" "\n" "\n" "%s\n" "\n" "\n" "�� " "��\n" "�� Mandrake Linux." #: ../../install_steps_interactive.pm_.c:1347 msgid "http://www.mandrakelinux.com/en/90errata.php3" msgstr "" #: ../../install_steps_interactive.pm_.c:1352 msgid "Generate auto install floppy" msgstr "�� " #: ../../install_steps_interactive.pm_.c:1354 msgid "" "The auto install can be fully automated if wanted,\n" "in that case it will take over the hard drive!!\n" "(this is meant for installing on another box).\n" "\n" "You may prefer to replay the installation.\n" msgstr "" "� �� ,\n"


context:
space:
mode: