summaryrefslogtreecommitdiffstats
path: root/perl-install/printerdrake.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printerdrake.pm')
-rw-r--r--perl-install/printerdrake.pm182
1 files changed, 148 insertions, 34 deletions
diff --git a/perl-install/printerdrake.pm b/perl-install/printerdrake.pm
index c0bb78e65..382191f9a 100644
--- a/perl-install/printerdrake.pm
+++ b/perl-install/printerdrake.pm
@@ -169,6 +169,84 @@ sub auto_detect {
@res;
}
+sub first_time_dialog {
+ my ($printer, $in, $upNetwork) = @_;
+ return 1 if (printer::get_default_spooler () or $::isInstall);
+
+ # Wait message
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Checking your system..."));
+
+ # Auto-detect local printers
+ my @autodetected = auto_detect (1, 0, 0);
+ my @printerlist;
+ my $localprinterspresent;
+ if (@autodetected == ()) {
+ $localprinterspresent = 0;
+ push (@printerlist, _("There are no printers found which are directly connected to your machine"));
+ } else {
+ $localprinterspresent = 1;
+ for my $printer (@autodetected) {
+ my $entry = $printer->{val}{DESCRIPTION};
+ if ($entry) {push (@printerlist, " - $entry\n");}
+ }
+ my $morethanoneprinters = ($#printerlist > 0);
+ my $unknown_printers = $#autodetected - $#printerlist;
+ if (@printerlist != ()) {
+ unshift (@printerlist,
+ ($morethanoneprinters ?
+ _("The following printers\n\n") :
+ _("The following printer\n\n")));
+ if ($unknown_printers == 1) {
+ push (@printerlist, _("\nand one unknown printer are "));
+ } elsif ($unknown_printers > 1) {
+ push (@printerlist, _("\nand %d unknown printers are ",
+ $unknown_printers));
+ } else {
+ push (@printerlist, ($morethanoneprinters ?
+ _("\nare ") :
+ _("\nis ")));
+ }
+ push (@printerlist, _("directly connected to your system"));
+ } else {
+ if ($unknown_printers == 1) {
+ push (@printerlist, _("\nThere is one unknown printer directly connected to your system"));
+ } elsif ($unknown_printers > 1) {
+ push (@printerlist, _("\nThere are %d unknown printers directly connected to your system",
+ $unknown_printers));
+ }
+ }
+ }
+ push (@printerlist,
+ _(" (Make sure that all your printers are connected and turned on).\n"));
+ my $localprinters = join('', @printerlist);
+
+ # Do we have a local network?
+
+ # If networking is configured, start it, but don't ask the user to
+ # configure networking.
+ my $havelocalnetworks =
+ (check_network($printer, $in, $upNetwork, 1) &&
+ (printer::getIPsInLocalNetworks() != ()));
+
+ # Finish building the dialog text
+ my $question = ($havelocalnetworks ?
+ ($localprinterspresent ?
+ _("Do you want to enable printing on the printers mentioned above or on printers in the local network?\n") :
+ _("Do you want to enable printing on printers in the local network?\n")) :
+ ($localprinterspresent ?
+ _("Do you want to enable printing on the printers mentioned above?\n") :
+ _("Are you sure that you want to set up printing on this machine?\n")));
+ my $warning = _("NOTE: Depending on the printer model and the printing system up to 80 MB of additional software will be installed.");
+ my $dialogtext = "$localprinters\n$question\n$warning";
+
+ # Close wait message
+ undef $w;
+
+ # Show dialog
+ $in->ask_yesorno(_("Printerdrake"), $dialogtext, 0);
+}
+
sub wizard_welcome {
my ($printer, $in, $upNetwork) = @_;
my $ret;
@@ -1237,12 +1315,14 @@ sub setup_common {
(!printer::files_exist((qw(/usr/sbin/ptal-mlcd
/usr/sbin/ptal-init
/usr/bin/xojpanel))))) {
- my $w = $in->wait_message('', _("Installing HPOJ package..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Installing HPOJ package..."));
$in->do_pkgs->install('hpoj', 'xojpanel');
}
# Configure and start HPOJ
my $w = $in->wait_message
- ('', _("Checking device and configuring HPOJ..."));
+ (_("Printerdrake"),
+ _("Checking device and configuring HPOJ..."));
$ptaldevice = printer::configure_hpoj($device, @autodetected);
if ($ptaldevice) {
@@ -1261,7 +1341,8 @@ sub setup_common {
'/usr/bin/xsane-gimp' :
()))))) {
my $w = $in->wait_message
- ('', _("Installing SANE packages..."));
+ (_("Printerdrake"),
+ _("Installing SANE packages..."));
$in->do_pkgs->install('sane-backends',
'sane-frontends',
'xsane', 'libsane-hpoj0',
@@ -1283,7 +1364,8 @@ sub setup_common {
/usr/bin/MToolsFM
)))) {
my $w = $in->wait_message
- ('', _("Installing mtools packages..."));
+ (_("Printerdrake"),
+ _("Installing mtools packages..."));
$in->do_pkgs->install('mtools', 'mtoolsfm');
}
# Configure mtools/MToolsFM for photo card access
@@ -1333,7 +1415,8 @@ sub setup_common {
($device !~ /^http:/) &&
($device !~ /^ipp:/)) {
my $w = $in->wait_message
- ('', _("Making printer port available for CUPS..."));
+ ('_("Printerdrake")',
+ _("Making printer port available for CUPS..."));
if ($ptaldevice eq "") {
printer::assure_device_is_available_for_cups($device);
} else {
@@ -1343,7 +1426,8 @@ sub setup_common {
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
@@ -1442,10 +1526,12 @@ sub get_db_entry {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
- my $w = $in->wait_message('', _("Preparing printer database..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Preparing printer database..."));
my $queue = $printer->{OLD_QUEUE};
if ($printer->{configured}{$queue}) {
# The queue was already configured
@@ -1562,7 +1648,8 @@ sub choose_model {
$in->set_help('chooseModel') if $::isInstall;
#- Read the printer driver database if necessary
if ((keys %printer::thedb) == 0) {
- my $w = $in->wait_message('', _("Reading printer database..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Reading printer database..."));
printer::read_printer_db($printer->{SPOOLER});
}
if (!member($printer->{DBENTRY}, keys(%printer::thedb))) {
@@ -1583,7 +1670,8 @@ sub get_printer_info {
my ($printer, $in) = @_;
#- Read the printer driver database if necessary
#if ((keys %printer::thedb) == 0) {
- # my $w = $in->wait_message('', _("Reading printer database..."));
+ # my $w = $in->wait_message(_("Printerdrake"),
+ # _("Reading printer database..."));
# printer::read_printer_db($printer->{SPOOLER});
#}
my $queue = $printer->{OLD_QUEUE};
@@ -2101,7 +2189,8 @@ Note: the photo test page can take a rather long time to get printed and on lase
if ($res1 && !$res2) {
my @lpq_output;
{
- my $w = $in->wait_message('', _("Printing test page(s)..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Printing test page(s)..."));
$upNetwork and do { &$upNetwork(); undef $upNetwork; sleep(1) };
my $stdtestpage = "/usr/share/printer-testpages/testprint.ps";
@@ -2253,7 +2342,8 @@ _("To know about the options available for the current printer read either the l
[ _("Print option list"), _("Close") ],
_("Close"));
if ($choice ne _("Close")) {
- my $w = $in->wait_message('', _("Printing test page(s)..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Printing test page(s)..."));
printer::print_optionlist($printer);
}
}
@@ -2310,7 +2400,8 @@ sub copy_queues_from {
my $oldspoolerstr;
my $noninteractive = 0;
{
- my $w = $in->wait_message('', _("Reading printer data..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Reading printer data..."));
@oldqueues = printer::get_copiable_queues($oldspooler, $newspooler);
@oldqueues = sort(@oldqueues);
$newspoolerstr = $printer::shortspooler_inv{$newspooler};
@@ -2382,7 +2473,7 @@ You can also type a new name or skip this printer.",
},
[{label => _("New printer name"),val => \$newqueue}]))) {
{
- my $w = $in->wait_message('',
+ my $w = $in->wait_message(_("Printerdrake"),
_("Transferring %s...", $oldqueue));
printer::copy_foomatic_queue($printer, $oldqueue,
$oldspooler, $newqueue) and
@@ -2403,7 +2494,8 @@ You can also type a new name or skip this printer.",
}
}
if ($queuecopied) {
- my $w = $in->wait_message('', _("Refreshing printer data..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Refreshing printer data..."));
printer::read_configured_queues($printer);
}
}
@@ -2592,7 +2684,8 @@ sub install_spooler {
}
if ($printer->{SPOOLER} eq "cups") {
{
- my $w = $in->wait_message('', _("Checking installed software..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Checking installed software..."));
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/lib/cups/cgi-bin/printers.cgi
/sbin/ifconfig
@@ -2632,11 +2725,13 @@ sub install_spooler {
start_spooler_on_boot($printer, $in, "cups");
} elsif ($printer->{SPOOLER} eq "lpd") {
{
- my $w = $in->wait_message('', _("Checking installed software..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Checking installed software..."));
# "lpr" conflicts with "LPRng", remove "LPRng"
if ((!$::testing) &&
(printer::files_exist((qw(/usr/lib/filters/lpf))))) {
- my $w = $in->wait_message('', _("Removing LPRng..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Removing LPRng..."));
$in->do_pkgs->remove_nodeps('LPRng');
}
if ((!$::testing) &&
@@ -2669,11 +2764,13 @@ sub install_spooler {
start_spooler_on_boot($printer, $in, "lpd");
} elsif ($printer->{SPOOLER} eq "lprng") {
{
- my $w = $in->wait_message('', _("Checking installed software..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Checking installed software..."));
# "LPRng" conflicts with "lpr", remove "lpr"
if ((!$::testing) &&
(printer::files_exist((qw(/usr/sbin/lpf))))) {
- my $w = $in->wait_message('', _("Removing LPD..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Removing LPD..."));
$in->do_pkgs->remove_nodeps('lpr');
}
if ((!$::testing) &&
@@ -2709,7 +2806,8 @@ sub install_spooler {
start_spooler_on_boot($printer, $in, "lpd");
} elsif ($printer->{SPOOLER} eq "pdq") {
{
- my $w = $in->wait_message('', _("Checking installed software..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Checking installed software..."));
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/bin/pdq
/usr/X11R6/bin/xpdq))))) {
@@ -2761,7 +2859,8 @@ sub setup_default_spooler {
printer::removelocalprintersfromapplications($printer);
# Get the queues of this spooler
{
- my $w = $in->wait_message('', _("Reading printer data..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Reading printer data..."));
printer::read_configured_queues($printer);
}
# Copy queues from former spooler
@@ -2769,7 +2868,8 @@ sub setup_default_spooler {
# Re-read the printer database (CUPS has additional drivers, PDQ
# has no raw queue)
%printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database..."));
+ #my $w = $in->wait_message(_("Printerdrake"),
+ # _("Reading printer database..."));
#printer::read_printer_db($printer->{SPOOLER});
}
# Save spooler choice
@@ -2779,8 +2879,9 @@ sub setup_default_spooler {
sub configure_queue {
my ($printer, $in) = @_;
- my $w = $in->wait_message('', _("Configuring printer \"%s\"...",
- $printer->{currentqueue}{queue}));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Configuring printer \"%s\"...",
+ $printer->{currentqueue}{queue}));
$printer->{complete} = 1;
printer::configure_queue($printer);
$printer->{complete} = 0;
@@ -2792,7 +2893,8 @@ sub install_foomatic {
(!printer::files_exist((qw(/usr/bin/foomatic-configure
/usr/lib/perl5/vendor_perl/5.8.0/Foomatic/DB.pm)
)))) {
- my $w = $in->wait_message('', _("Installing Foomatic..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Installing Foomatic..."));
$in->do_pkgs->install('foomatic');
}
}
@@ -2821,7 +2923,8 @@ sub main {
# printerdrake does not work without foomatic, and for more convenience
# we install some more stuff
{
- my $w = $in->wait_message('', _("Checking installed software..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Checking installed software..."));
if ((!$::testing) &&
(!printer::files_exist((qw(/usr/bin/foomatic-configure
/usr/lib/perl5/vendor_perl/5.8.0/Foomatic/DB.pm
@@ -2866,7 +2969,8 @@ sub main {
# Get the default printer
if (defined($printer->{SPOOLER}) && ($printer->{SPOOLER} ne '') &&
((!defined($printer->{DEFAULT})) || ($printer->{DEFAULT} eq ''))) {
- my $w = $in->wait_message('', _("Preparing PrinterDrake..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Preparing Printerdrake..."));
$printer->{DEFAULT} = printer::get_default_printer($printer);
if ($printer->{DEFAULT}) {
# If a CUPS system has only remote printers and no default
@@ -2883,7 +2987,8 @@ sub main {
# Configure the current printer queues in applications
{
- my $w = $in->wait_message('', _("Configuring applications..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Configuring applications..."));
printer::configureapplications($printer);
}
@@ -3029,11 +3134,14 @@ sub main {
$::expert = !$::expert;
# Read printer database for the new user mode
%printer::thedb = ();
- #my $w = $in->wait_message('', _("Reading printer database..."));
+ #my $w = $in->wait_message(_("Printerdrake"),
+ # _("Reading printer database..."));
#printer::read_printer_db($printer->{SPOOLER});
# Re-read printer queues to switch the tree
# structure between expert/normal mode.
- my $w = $in->wait_message('', _("Reading printer data..."));
+ my $w = $in->wait_message
+ (_("Printerdrake"),
+ _("Reading printer data..."));
printer::read_configured_queues($printer);
$cursorpos = "::";
next;
@@ -3333,7 +3441,10 @@ What do you want to modify on this printer?",
configure_queue($printer, $in);
# Delete old queue when it was renamed
if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) {
- my $w = $in->wait_message('', _("Removing old printer \"%s\"...", $printer->{OLD_QUEUE}));
+ my $w = $in->wait_message
+ (_("Printerdrake"),
+ _("Removing old printer \"%s\"...",
+ $printer->{OLD_QUEUE}));
printer::remove_queue($printer, $printer->{OLD_QUEUE});
# If the default printer was renamed, correct the
# the default printer setting of the spooler
@@ -3385,7 +3496,9 @@ What do you want to modify on this printer?",
if ($in->ask_yesorno('',
_("Do you really want to remove the printer \"%s\"?", $queue), 1)) {
{
- my $w = $in->wait_message('', _("Removing printer \"%s\"...", $queue));
+ my $w = $in->wait_message
+ (_("Printerdrake"),
+ _("Removing printer \"%s\"...", $queue));
if (printer::remove_queue($printer, $queue)) {
$editqueue = 0;
# Define a new default printer if we have
@@ -3437,7 +3550,8 @@ What do you want to modify on this printer?",
# Configure the current printer queue in applications when main menu
# will not be shown (During installation in "Recommended" mode)
if ($::isInstall && !$::expert && !$menushown && !$continue) {
- my $w = $in->wait_message('', _("Configuring applications..."));
+ my $w = $in->wait_message(_("Printerdrake"),
+ _("Configuring applications..."));
printer::configureapplications($printer);
}
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-09 18:11:46 +0000