diff options
Diffstat (limited to 'perl-install/printer')
| -rw-r--r-- | perl-install/printer/STATUS | 5 | ||||
| -rw-r--r-- | perl-install/printer/common.pm | 86 | ||||
| -rw-r--r-- | perl-install/printer/cups.pm | 136 | ||||
| -rw-r--r-- | perl-install/printer/data.pm | 109 | ||||
| -rw-r--r-- | perl-install/printer/default.pm | 51 | ||||
| -rw-r--r-- | perl-install/printer/detect.pm | 522 | ||||
| -rw-r--r-- | perl-install/printer/gimp.pm | 361 | ||||
| -rw-r--r-- | perl-install/printer/main.pm | 2672 | ||||
| -rw-r--r-- | perl-install/printer/office.pm | 375 | ||||
| -rw-r--r-- | perl-install/printer/printerdrake.pm | 4600 | ||||
| -rw-r--r-- | perl-install/printer/services.pm | 61 |
11 files changed, 0 insertions, 8978 deletions
diff --git a/perl-install/printer/STATUS b/perl-install/printer/STATUS deleted file mode 100644 index e9c5bc205..000000000 --- a/perl-install/printer/STATUS +++ /dev/null @@ -1,5 +0,0 @@ -printerdrake status - -- printer::printerdrake still needs to be splited/cleaned - -- printer::printerdrake should probably be renamed printer::gui diff --git a/perl-install/printer/common.pm b/perl-install/printer/common.pm deleted file mode 100644 index 9d8f4d9a5..000000000 --- a/perl-install/printer/common.pm +++ /dev/null @@ -1,86 +0,0 @@ -package printer::common; - -use strict; -use vars qw(@ISA @EXPORT); - -@ISA = qw(Exporter); -@EXPORT = qw(addentry addsection removeentry removesection); - - -sub addentry { - my ($section, $entry, $filecontent) = @_; - my $sectionfound = 0; - my $entryinserted = 0; - my @lines = split("\n", $filecontent); - foreach (@lines) { - if (!$sectionfound) { - $sectionfound = 1 if /^\s*\[\s*$section\s*\]\s*$/; - } else { - if (!/^\s*$/ && !/^\s*;/) { #-# - $_ = "$entry\n$_"; - $entryinserted = 1; - last; - } - } - } - push(@lines, $entry) if $sectionfound && !$entryinserted; - return join "\n", @lines; -} - -sub addsection { - my ($section, $filecontent) = @_; - my @lines = split("\n", $filecontent); - foreach (@lines) { - # section already there, nothing to be done - return $filecontent if /^\s*\[\s*$section\s*\]\s*$/; - } - return $filecontent . "\n[$section]"; -} - -sub removeentry { - my ($section, $entry, $filecontent) = @_; - my $sectionfound = 0; - my $done = 0; - my @lines = split("\n", $filecontent); - foreach (@lines) { - $_ = "$_\n"; - next if $done; - if (!$sectionfound) { - $sectionfound = 1 if /^\s*\[\s*$section\s*\]\s*$/; - } else { - if (/^\s*\[.*\]\s*$/) { # Next section - $done = 1; - } elsif (/^\s*$entry/) { - $_ = ""; - $done = 1; - } - } - } - return join "", @lines; -} - -sub removesection { - my ($section, $filecontent) = @_; - my $sectionfound = 0; - my $done = 0; - my @lines = split("\n", $filecontent); - foreach (@lines) { - $_ = "$_\n"; - next if $done; - if (!$sectionfound) { - if (/^\s*\[\s*$section\s*\]\s*$/) { - $_ = ""; - $sectionfound = 1; - } - } else { - if (/^\s*\[.*\]\s*$/) { # Next section - $done = 1; - } else { - $_ = ""; - } - } - } - return join "", @lines; -} - -1; diff --git a/perl-install/printer/cups.pm b/perl-install/printer/cups.pm deleted file mode 100644 index ab9e28b21..000000000 --- a/perl-install/printer/cups.pm +++ /dev/null @@ -1,136 +0,0 @@ -package printer::cups; - -use strict; - -use printer::data; -use run_program; -use common; - - -#------------------------------------------------------------------------------ - -sub lpstat_lpv() { - - # Get a list of remotely defined print queues, with "Description" and - # "Location" - - # Info to return - my @items; - - # Hash to simplify the adding of the URIs - my $itemshash; - - # Run the "lpstat" command in a mode to give as much info about the - # print queues as possible - my @lpstat = run_program::rooted_get_stdout - ($::prefix, 'lpstat', '-l', '-p', '-v'); - - my $currentitem = -1; - for my $line (@lpstat) { - chomp ($line); - if (!($line =~ m!^\s*$!)) { - if ($line =~ m!^printer\s+(\S+)\s+(\S.*)$!) { - # Beginning of new printer's entry - my $name = $1; - push(@items, {}); - $currentitem = $#items; - $itemshash->{$name} = $currentitem; - $items[$currentitem]{queuename} ||= $name; - } elsif ($line =~ m!^\s+Description:\s+(\S.*)$!) { - # Description field - if ($currentitem != -1) { - $items[$currentitem]{description} ||= $1; - } - } elsif ($line =~ m!^\s+Location:\s+(\S.*)$!) { - # Location field - if ($currentitem != -1) { - $items[$currentitem]{location} ||= $1; - } - } elsif ($line =~ m!^device\s+for\s+(\S+):\s+(\S.*)$!) { - # "device for ..." line, extract URI - my $name = $1; - my $uri = $2; - if (defined($itemshash->{$name})) { - if ($uri !~ /:/) {$uri = "file:" . $uri}; - $currentitem = $itemshash->{$name}; - if (($currentitem <= $#items) && - ($items[$currentitem]{queuename} eq $name)) { - $items[$currentitem]{uri} ||= $uri; - if ($uri =~ m!^ipp://([^/:]+)[:/]!) { - $items[$currentitem]{ipp} = $1; - } - } - } - } - } - } - return @items; -} - -sub lpstat_v() { - map { - if (my ($queuename, $uri) = m/^\s*device\s+for\s+([^:\s]+):\s*(\S+)\s*$/) { - +{ queuename => $queuename, uri => $uri, if_($uri =~ m!^ipp://([^/:]+)[:/]!, ipp => $1) }; - } else { - (); - } - } run_program::rooted_get_stdout($::prefix, 'lpstat', '-v'); -} - -sub lpinfo_v() { - map { - if (my ($type, $uri) = m/^\s*(\S+)\s+(\S+)\b/) { - if ($uri =~ m!:/!) { - $uri; - } elsif ($type =~ m/network/i) { - "$uri://"; - } else { - "$uri:/"; - } - } else { - (); - } - } run_program::rooted_get_stdout($::prefix, 'lpinfo', '-v'); -} - -sub read_printer_list { - my ($printer) = @_; - # This function reads in a list of all printers which the local CUPS - # daemon currently knows, including remote ones. - map { - my $comment = - $_->{ipp} && !$printer->{configured}{$_->{queuename}} ? - N("(on %s)", $_->{ipp}) : N("(on this machine)"); - "$_->{queuename} $comment"; - } lpstat_v(); -} - -sub get_formatted_remote_queues { - my ($printer) = @_; - - # This function reads in a list of all remote printers which the local - # CUPS daemon knows due to broadcasting of remote servers or - # "BrowsePoll" entries in the local /etc/cups/cupsd.conf/ - map { - join('!', if_($printer->{expert}, N("CUPS")), N("Configured on other machines"), $_); - } map { - my $comment = N("On CUPS server \"%s\"", $_->{ipp}) . ($_->{queuename} eq $printer->{DEFAULT} ? N(" (Default)") : ""); - "$_->{queuename}: $comment"; - } grep { - $_->{ipp} && !$printer->{configured}{$_->{queuename}}; - } lpstat_v(); -} - -sub get_remote_queues { - my ($printer) = @_; - # The following code reads in a list of all remote printers which the - # local CUPS daemon knows due to broadcasting of remote servers or - # "BrowsePoll" entries in the local /etc/cups/cupsd.conf - map { - "$_->{queuename}|$_->{ipp}"; - } grep { - $_->{ipp} && !$printer->{configured}{$_->{queuename}}; - } lpstat_v(); -} - -1; diff --git a/perl-install/printer/data.pm b/perl-install/printer/data.pm deleted file mode 100644 index 4a64ead75..000000000 --- a/perl-install/printer/data.pm +++ /dev/null @@ -1,109 +0,0 @@ -package printer::data; - -use strict; -use common; -use vars qw(@ISA @EXPORT); - -@ISA = qw(Exporter); -@EXPORT = qw(%spoolers %spooler_inv %shortspooler_inv - $kernelversion $usbprintermodule); - - -our $kernelversion = `uname -r 2>/dev/null`; -$kernelversion =~ s/^(\s*)(\d+\.\d+)(\..*)$/$2/; -chomp $kernelversion; - -our $usbprintermodule = ($kernelversion eq '2.6' ? "usblp" : "printer"); - -our %spoolers = ('pdq' => { - 'help' => "/usr/bin/pdq -h -P %s 2>&1 |", - 'print_command' => 'lpr-pdq', - 'print_gui' => 'xpdq', - 'long_name' => N("PDQ - Print, Don't Queue"), - 'short_name' => N("PDQ"), - 'packages2add' => [ [ 'pdq' ], [qw(/usr/bin/pdq /usr/X11R6/bin/xpdq)] ], - 'alternatives' => [ - [ 'lpr', '/usr/bin/lpr-pdq' ], - [ 'lpq', '/usr/bin/lpq-foomatic' ], - [ 'lprm', '/usr/bin/lprm-foomatic' ] - ], - }, - 'lpd' => { - 'print_command' => 'lpr-lpd', - 'print_gui' => 'gpr', - 'long_name' => N("LPD - Line Printer Daemon"), - 'short_name' => N("LPD"), - 'boot_spooler' => 'lpd', - 'service' => 'lpd', - 'packages2add' => [ [qw(lpr net-tools gpr a2ps ImageMagick)], - [qw(/usr/sbin/lpf - /usr/sbin/lpd - /sbin/ifconfig - /usr/bin/gpr - /usr/bin/a2ps - /usr/bin/convert)] ], - 'packages2rm' => [ 'LPRng', '/usr/lib/filters/lpf' ], - 'alternatives' => [ - [ 'lpr', '/usr/bin/lpr-lpd' ], - [ 'lpq', '/usr/bin/lpq-lpd' ], - [ 'lprm', '/usr/bin/lprm-lpd' ], - [ 'lpc', '/usr/sbin/lpc-lpd' ] - ] - }, - 'lprng' => { - 'print_command' => 'lpr-lpd', - 'print_gui' => 'gpr', - 'long_name' => N("LPRng - LPR New Generation"), - 'short_name' => N("LPRng"), - 'boot_spooler' => 'lpd', - 'service' => 'lpd', - 'packages2add' => [ [qw(LPRng net-tools gpr a2ps ImageMagick)], - [qw(/usr/lib/filters/lpf - /usr/sbin/lpd - /sbin/ifconfig - /usr/bin/gpr - /usr/bin/a2ps - /usr/bin/convert)] ], - 'packages2rm' => [ 'lpr', '/usr/sbin/lpf' ], - 'alternatives' => [ - [ 'lpr', '/usr/bin/lpr-lpd' ], - [ 'lpq', '/usr/bin/lpq-lpd' ], - [ 'lprm', '/usr/bin/lprm-lpd' ], - [ 'lp', '/usr/bin/lp-lpd' ], - [ 'cancel', '/usr/bin/cancel-lpd' ], - [ 'lpstat', '/usr/bin/lpstat-lpd' ], - [ 'lpc', '/usr/sbin/lpc-lpd' ] - ] - }, - 'cups' => { - 'help' => "/usr/bin/lphelp %s |", - 'print_command' => 'lpr-cups', - 'print_gui' => 'xpp', - 'long_name' => N("CUPS - Common Unix Printing System"), - 'short_name' => N("CUPS"), - 'boot_spooler' => 'cups', - 'service' => 'cups', - 'packages2add' => [ ['cups', 'net-tools', 'xpp', 'cups-drivers', - $::isInstall ? 'curl' : 'webfetch'], - [ qw(/usr/lib/cups/cgi-bin/printers.cgi - /sbin/ifconfig - /usr/bin/xpp - /usr/share/cups/model/postscript.ppd.gz), - $::isInstall || - !(-x '/usr/bin/wget') ? - '/usr/bin/curl' : - '/usr/bin/wget' ] ], - 'alternatives' => [ - [ 'lpr', '/usr/bin/lpr-cups' ], - [ 'lpq', '/usr/bin/lpq-cups' ], - [ 'lprm', '/usr/bin/lprm-cups' ], - [ 'lp', '/usr/bin/lp-cups' ], - [ 'cancel', '/usr/bin/cancel-cups' ], - [ 'lpstat', '/usr/bin/lpstat-cups' ], - [ 'lpc', '/usr/sbin/lpc-cups' ] - ] - } - ); -our %spooler_inv = map { $spoolers{$_}{long_name} => $_ } keys %spoolers; - -our %shortspooler_inv = map { $spoolers{$_}{short_name} => $_ } keys %spoolers; diff --git a/perl-install/printer/default.pm b/perl-install/printer/default.pm deleted file mode 100644 index af997fd48..000000000 --- a/perl-install/printer/default.pm +++ /dev/null @@ -1,51 +0,0 @@ -package printer::default; - -use strict; -use run_program; -use common; - -#-configuration directory of Foomatic -my $FOOMATICCONFDIR = "/etc/foomatic"; -#-location of the file containing the default spooler's name -my $FOOMATIC_DEFAULT_SPOOLER = "$FOOMATICCONFDIR/defaultspooler"; - -sub set_printer { - my ($printer) = $_[0]; - run_program::rooted($::prefix, "foomatic-configure", - "-D", "-q", "-s", $printer->{SPOOLER}, - "-n", $printer->{DEFAULT}) or return 0; - return 1; -} - -sub get_printer { - my $printer = $_[0]; - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . - "foomatic-configure -Q -q -s $printer->{SPOOLER} |" or return undef; - my $line; - while ($line = <F>) { - if ($line =~ m!^\s*<defaultqueue>(.*)</defaultqueue>\s*$!) { - return $1; - } - } - return undef; -} - -sub printer_type() { "LOCAL" } - -sub get_spooler () { - if (-f "$::prefix$FOOMATIC_DEFAULT_SPOOLER") { - my $spool = cat_("$::prefix$FOOMATIC_DEFAULT_SPOOLER"); - chomp $spool; - return $spool if $spool =~ /cups|lpd|lprng|pdq/; - } -} - -sub set_spooler ($) { - my ($printer) = @_; - # Mark the default driver in a file - output_p("$::prefix$FOOMATIC_DEFAULT_SPOOLER", $printer->{SPOOLER}); -} - - -1; diff --git a/perl-install/printer/detect.pm b/perl-install/printer/detect.pm deleted file mode 100644 index 71adef0cf..000000000 --- a/perl-install/printer/detect.pm +++ /dev/null @@ -1,522 +0,0 @@ -package printer::detect; - -use strict; -use common; -use modules; -use detect_devices; -use printer::data; - -sub local_detect() { - modules::get_probeall("usb-interface") and eval { modules::load($usbprintermodule) }; - eval { modules::unload(qw(lp parport_pc parport)) }; #- on kernel 2.4 parport has to be unloaded to probe again - eval { modules::load(qw(parport_pc lp)) }; #- take care as not available on 2.4 kernel (silent error). - whatPrinter(); -} - -sub net_detect() { whatNetPrinter(1, 0) } - -sub net_smb_detect() { whatNetPrinter(0, 1) } - -sub detect() { - local_detect(), whatNetPrinter(1, 1); -} - - -#-CLASS:PRINTER; -#-MODEL:HP LaserJet 1100; -#-MANUFACTURER:Hewlett-Packard; -#-DESCRIPTION:HP LaserJet 1100 Printer; -#-COMMAND SET:MLC,PCL,PJL; -sub whatPrinter() { - my @res = (whatParport(), whatUsbport()); - grep { $_->{val}{CLASS} eq "PRINTER" } @res; -} - -sub whatParport() { - my @res; - foreach (0..3) { - my $elem = {}; - my $F; - open $F, "/proc/parport/$_/autoprobe" or open $F, "/proc/sys/dev/parport/parport$_/autoprobe" or next; - { - local $_; - my $itemfound = 0; - while (<$F>) { - if (/(.*):(.*);/) { #-# - $elem->{$1} = $2; - $elem->{$1} =~ s/Hewlett[-\s_]Packard/HP/; - $elem->{$1} =~ s/HEWLETT[-\s_]PACKARD/HP/; - $itemfound = 1; - } - } - # Some parallel printers miss the "CLASS" field - $elem->{CLASS} = 'PRINTER' - if $itemfound && !defined($elem->{CLASS}); - } - push @res, { port => "/dev/lp$_", val => $elem }; - } - @res; -} - -sub whatPrinterPort() { - grep { detect_devices::tryWrite($_) } qw(/dev/lp0 /dev/lp1 /dev/lp2 /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9); -} - -sub whatUsbport() { - # The printer manufacturer and model names obtained with the usb_probe() - # function were very messy, once there was a lot of noise around the - # manufacturers name ("Inc.", "SA", "International", ...) and second, - # all Epson inkjets answered with the name "Epson Stylus Color 760" which - # lead many newbies to install their Epson Stylus Photo XXX as an Epson - # Stylus Color 760 ... - # - # This routine based on an ioctl request gives very clean and correct - # manufacturer and model names, so that they are easily matched to the - # printer entries in the Foomatic database - my @res; - foreach my $i (0..15) { - my $port = "/dev/usb/lp$i"; - my $realport = devices::make($port); - next if !$realport; - next if ! -r $realport; - foreach my $j (1..3) { - open(my $PORT, $realport) or next; - my $idstr = ""; - # Calculation of IOCTL function 0x84005001 (to get device ID - # string): - # len = 1024 - # IOCNR_GET_DEVICE_ID = 1 - # LPIOC_GET_DEVICE_ID(len) = - # _IOC(_IOC_READ, 'P', IOCNR_GET_DEVICE_ID, len) - # _IOC(), _IOC_READ as defined in /usr/include/asm/ioctl.h - # Use "eval" so that program does not stop when IOCTL fails - eval { - my $output = "\0" x 1024; - ioctl($PORT, 0x84005001, $output); - $idstr = $output; - } or do { - close $PORT; - next; - }; - close $PORT; - # Remove non-printable characters - $idstr =~ tr/[\x00-\x1f]/./; - # If we do not find any item in the ID string, we try to read - # it again - my $itemfound = 0; - # Extract the printer data from the ID string - my ($manufacturer, $model, $serialnumber, $description, $commandset) = - ("", "", "", "", ""); - my ($sku); - if ($idstr =~ /MFG:([^;]+);/ || $idstr =~ /MANUFACTURER:([^;]+);/) { - $manufacturer = $1; - $manufacturer =~ s/Hewlett[-\s_]Packard/HP/; - $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/; - $itemfound = 1; - } - # For HP's multi-function devices the real model name is in the "SKU" - # field. So use this field with priority for $model when it exists. - if ($idstr =~ /MDL:([^;]+);/ || $idstr =~ /MODEL:([^;]+);/) { - $model ||= $1; - $itemfound = 1; - } - if ($idstr =~ /SKU:([^;]+);/) { - $sku = $1; - $itemfound = 1; - } - if ($idstr =~ /DES:([^;]+);/ || $idstr =~ /DESCRIPTION:([^;]+);/) { - $description = $1; - $description =~ s/Hewlett[-\s_]Packard/HP/; - $description =~ s/HEWLETT[-\s_]PACKARD/HP/; - $itemfound = 1; - } - if (($idstr =~ /SE*R*N:([^;]+);/) || - ($idstr =~ /SN:([^;]+);/)) { - $serialnumber = $1; - $itemfound = 1; - } - if ($idstr =~ /CMD:([^;]+);/ || - $idstr =~ /COMMAND\s*SET:([^;]+);/) { - $commandset ||= $1; - $itemfound = 1; - } - # Nothing found? Try again if not in the third attempt, - # in the third attempt always accept. - next if !$itemfound && $j < 3; - # Was there a manufacturer and a model in the string? - if ($manufacturer eq "" || $model eq "") { - $manufacturer = ""; - $model = N("Unknown Model"); - } - # No description field? Make one out of manufacturer and model. - if ($description eq "") { - $description = "$manufacturer $model"; - } - # Store this auto-detection result in the data structure - push @res, { port => $port, val => - { CLASS => 'PRINTER', - MODEL => $model, - MANUFACTURER => $manufacturer, - DESCRIPTION => $description, - SERIALNUMBER => $serialnumber, - 'COMMAND SET' => $commandset, - SKU => $sku - } }; - last; - } - } - @res; -} - -sub whatNetPrinter { - my ($network, $smb) = @_; - - my (@res); - - # Which ports should be scanned? - my @portstoscan; - push @portstoscan, "139" if $smb; - push @portstoscan, "4010", "4020", "4030", "5503", "9100-9104" if $network; - - return () if $#portstoscan < 0; - my $portlist = join ",", @portstoscan; - - # Which hosts should be scanned? - # (Applying nmap to a whole network is very time-consuming, because nmap - # waits for a certain timeout period on non-existing hosts, so we get a - # lists of existing hosts by pinging the broadcast addresses for existing - # hosts and then scanning only them, which is much faster) - my @hostips = getIPsInLocalNetworks(); - return () if $#hostips < 0; - my $hostlist = join " ", @hostips; - - # Scan network for printers, the timeout settings are there to avoid - # delays caused by machines blocking their ports with a firewall - local *F; - open F, ($::testing ? "" : "chroot $::prefix/ ") . - qq(/bin/sh -c "export LC_ALL=C; nmap -r -P0 --host_timeout 400 --initial_rtt_timeout 200 -p $portlist $hostlist" |) - or return @res; - my ($host, $ip, $port, $modelinfo) = ("", "", "", ""); - while (my $line = <F>) { - chomp $line; - - # head line of the report of a host with the ports in question open - #if ($line =~ m/^\s*Interesting\s+ports\s+on\s+(\S*)\s*\(([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\)\s*:\s*$/i) { - if ($line =~ m/^\s*Interesting\s+ports\s+on\s+(\S*)\s*\((\S+)\)\s*:\s*$/i) { - ($host, $ip) = ($1, $2); - $host = $ip if $host eq ""; - $port = ""; - - undef $modelinfo; - - } elsif ($line =~ m!^\s*(\d+)/\S+\s+open\s+!i) { - next if $ip eq ""; - $port = $1; - - # Now we have all info for one printer - # Store this auto-detection result in the data structure - - # Determine the protocol by the port number - - # SMB/Windows - if ($port eq "139") { - my @shares = getSMBPrinterShares($ip); - foreach my $share (@shares) { - push @res, { port => "smb://$host/$share->{name}", - val => { CLASS => 'PRINTER', - MODEL => N("Unknown Model"), - MANUFACTURER => "", - DESCRIPTION => $share->{description}, - SERIALNUMBER => "" - } - }; - } - } else { - if (!defined($modelinfo)) { - # SNMP request to auto-detect model - $modelinfo = getSNMPModel($ip); - } - if (defined($modelinfo)) { - push @res, { port => "socket://$host:$port", - val => $modelinfo - }; - } - } - } - } - close F; - @res; -} - -sub getNetworkInterfaces() { - - # subroutine determines the list of all network interfaces reported - # by "ifconfig", except "lo". - - # Return an empty list if no network is running - return () unless network_running(); - - my @interfaces; - - local *IFCONFIG_OUT; - open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") . - '/bin/sh -c "export LC_ALL=C; ifconfig" |' or return (); - while (my $readline = <IFCONFIG_OUT>) { - # New entry ... - if ($readline =~ /^(\S+)\s/) { - my $dev = $1; - if ($dev ne "lo") { - push @interfaces, $dev; - } - } - } - close(IFCONFIG_OUT); - - @interfaces; -} - -sub getIPsOfLocalMachine() { - - # subroutine determines all IPs which point to the local machine, - # except 127.0.0.1 (localhost). - - # Return an empty list if no network is running - return () unless network_running(); - - # Read the output of "ifconfig" to determine the broadcast addresses of - # the local networks - my $dev_is_realnet = 0; - my @local_ips; - my $current_ip = ""; - - local *IFCONFIG_OUT; - open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") . - '/bin/sh -c "export LC_ALL=C; ifconfig" |' or return (); - while (my $readline = <IFCONFIG_OUT>) { - # New entry ... - if ($readline =~ /^(\S+)\s/) { - my $dev = $1; - # ... for a real network (not lo = localhost) - $dev_is_realnet = $dev ne 'lo'; - # delete previous address - $current_ip = ""; - } - # Are we in the important line now? - if ($readline =~ /\sinet addr:([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\s/) { - # Rip out the IP address - $current_ip = $1; - - # Are we in an entry for a real network? - if ($dev_is_realnet) { - # Store current IP address - push @local_ips, $current_ip; - } - } - } - close(IFCONFIG_OUT); - @local_ips; -} - -sub getIPsInLocalNetworks() { - - # subroutine determines the list of all hosts reachable in the local - # networks by means of pinging the broadcast addresses. - - # Return an empty list if no network is running - return () unless network_running(); - - # Read the output of "ifconfig" to determine the broadcast addresses of - # the local networks - my $dev_is_localnet = 0; - my @local_bcasts; - my $current_bcast = ""; - - local *IFCONFIG_OUT; - open IFCONFIG_OUT, ($::testing ? "" : "chroot $::prefix/ ") . - '/bin/sh -c "export LC_ALL=C; ifconfig" |' or return (); - while (my $readline = <IFCONFIG_OUT>) { - # New entry ... - if ($readline =~ /^(\S+)\s/) { - my $dev = $1; - # ... for a local network (eth = ethernet, - # vmnet = VMWare, - # ethernet card connected to ISP excluded)? - $dev_is_localnet = $dev =~ /^eth/ || $dev =~ /^vmnet/; - # delete previous address - $current_bcast = ""; - } - # Are we in the important line now? - if ($readline =~ /\sBcast:([0-9]+\.[0-9]+\.[0-9]+\.[0-9]+)\s/) { - # Rip out the broadcast IP address - $current_bcast = $1; - - # Are we in an entry for a local network? - if ($dev_is_localnet == 1) { - # Store current IP address - push @local_bcasts, $current_bcast; - } - } - } - close(IFCONFIG_OUT); - - my @addresses; - # Now ping all broadcast addresses and additionally "nmblookup" the - # networks (to find Windows servers which do not answer to ping) - foreach my $bcast (@local_bcasts) { - local *F; - open F, ($::testing ? "" : "chroot $::prefix/ ") . - qq(/bin/sh -c "export LC_ALL=C; ping -w 1 -b -n $bcast | cut -f 4 -d ' ' | sed s/:// | egrep '^[0-9]+\\.[0-9]+\\.[0-9]+\\.[0-9]+' | uniq | sort" |) - or next; - local $_; - while (<F>) { chomp; push @addresses, $_ } - close F; - if (-x "/usr/bin/nmblookup") { - local *F; - open F, ($::testing ? "" : "chroot $::prefix/ ") . - qq(/bin/sh -c "export LC_ALL=C; nmblookup -B $bcast \\* | cut -f 1 -d ' ' | egrep '^[0-9]+\\.[0-9]+\\.[0-9]+\\.[0-9]+' | uniq | sort" |) - or next; - local $_; - while (<F>) { - chomp; - push @addresses, $_ if !(member($_,@addresses)); - } - } - } - - @addresses; -} - -sub getSMBPrinterShares { - my ($host) = @_; - - # SMB request to auto-detect shares - local *F; - open F, ($::testing ? "" : "chroot $::prefix/ ") . - qq(/bin/sh -c "export LC_ALL=C; smbclient -N -L $host" |) or return (); - my $insharelist = 0; - my @shares; - while (my $l = <F>) { - chomp $l; - if ($l =~ /^\s*Sharename\s+Type\s+Comment\s*$/i) { - $insharelist = 1; - } elsif ($l =~ /^\s*Server\s+Comment\s*$/i) { - $insharelist = 0; - } elsif ($l =~ /^\s*(\S+)\s+Printer\s*(.*)$/i && - $insharelist) { - my $name = $1; - my $description = $2; - $description =~ s/^(\s*)//; - push @shares, { name => $name, description => $description }; - } - } - close F; - - return @shares; -} - -sub getSNMPModel { - my ($host) = @_; - my $manufacturer = ""; - my $model = ""; - my $description = ""; - my $serialnumber = ""; - - # SNMP request to auto-detect model - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . - qq(/bin/sh -c "scli -v 1 -c 'show printer info' $host" |) or - return { CLASS => 'PRINTER', - MODEL => N("Unknown Model"), - MANUFACTURER => "", - DESCRIPTION => "", - SERIALNUMBER => "" - }; - while (my $l = <F>) { - chomp $l; - if ($l =~ /^\s*Manufacturer:\s*(\S.*)$/i && - $l =~ /^\s*Vendor:\s*(\S.*)$/i) { - $manufacturer = $1; - $manufacturer =~ s/Hewlett[-\s_]Packard/HP/; - $manufacturer =~ s/HEWLETT[-\s_]PACKARD/HP/; - } elsif ($l =~ /^\s*Model:\s*(\S.*)$/i) { - $model = $1; - } elsif ($l =~ /^\s*Description:\s*(\S.*)$/i) { - $description = $1; - $description =~ s/Hewlett[-\s_]Packard/HP/; - $description =~ s/HEWLETT[-\s_]PACKARD/HP/; - } elsif ($l =~ /^\s*Serial\s*Number:\s*(\S.*)$/i) { - $serialnumber = $1; - } - } - close F; - - # Was there a manufacturer and a model in the output? - # If not, get them from the description - if ($manufacturer eq "" || $model eq "") { - if ($description =~ /^\s*(\S*)\s+(\S.*)$/) { - $manufacturer = $1 if $manufacturer eq ""; - $model = $2 if $model eq ""; - } - # No description field? Make one out of manufacturer and model. - } elsif ($description eq "") { - $description = "$manufacturer $model"; - } - - # We couldn't determine a model - $model = N("Unknown Model") if $model eq ""; - - # Remove trailing spaces - $manufacturer =~ s/(\S+)\s+$/$1/; - $model =~ s/(\S+)\s+$/$1/; - $description =~ s/(\S+)\s+$/$1/; - $serialnumber =~ s/(\S+)\s+$/$1/; - - # Now we have all info for one printer - # Store this auto-detection result in the data structure - return { CLASS => 'PRINTER', - MODEL => $model, - MANUFACTURER => $manufacturer, - DESCRIPTION => $description, - SERIALNUMBER => $serialnumber - }; -} - -sub network_running() { - # If the network is not running return 0, otherwise 1. - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . - '/bin/sh -c "export LC_ALL=C; /sbin/ifconfig" |' or - die 'Could not run "ifconfig"!'; - while (my $line = <F>) { - if ($line !~ /^lo\s+/ && # The loopback device can have been - # started by the spooler's startup script - $line =~ /^(\S+)\s+/) { # In this line starts an entry for a - # running network - close F; - return 1; - } - } - close F; - return 0; -} - -sub parport_addr { - # auto-detect the parallel port addresses - my ($device) = @_; - $device =~ m!^/dev/lp(\d+)$! or - $device =~ m!^/dev/printers/(\d+)$!; - my $portnumber = $1; - my $parport_addresses = - `cat /proc/sys/dev/parport/parport$portnumber/base-addr`; - my $address_arg; - if ($parport_addresses =~ /^\s*(\d+)\s+(\d+)\s*$/) { - $address_arg = sprintf(" -base 0x%x -basehigh 0x%x", $1, $2); - } elsif ($parport_addresses =~ /^\s*(\d+)\s*$/) { - $address_arg = sprintf(" -base 0x%x", $1); - } else { - $address_arg = ""; - } - return $address_arg; -} - -1; diff --git a/perl-install/printer/gimp.pm b/perl-install/printer/gimp.pm deleted file mode 100644 index 8da3a7625..000000000 --- a/perl-install/printer/gimp.pm +++ /dev/null @@ -1,361 +0,0 @@ -package printer::gimp; - -use strict; -use run_program; -use common; -use printer::common; -use printer::data; -use printer::cups; - -# ------------------------------------------------------------------ -# GIMP-print related stuff -# ------------------------------------------------------------------ - -sub configure { - my ($printer) = @_; - # Do we have files to treat? - my @configfilenames = findconfigfiles(); - return 1 if $#configfilenames < 0; - # There is no system-wide config file, treat every user's config file - foreach my $configfilename (@configfilenames) { - # Load GIMP's printer config file - my $configfilecontent = readconfigfile($configfilename); - # Update local printer queues - foreach my $queue (keys(%{$printer->{configured}})) { - # Check if we have a PPD file - if (! -r "$::prefix/etc/foomatic/$queue.ppd") { - if (-r "$::prefix/etc/cups/ppd/$queue.ppd") { - # If we have a PPD file in the CUPS config dir, link to it - run_program::rooted($::prefix, - "ln", "-sf", - "/etc/cups/ppd/$queue.ppd", - "/etc/foomatic/$queue.ppd"); - } elsif (-r "$::prefix/usr/share/postscript/ppd/$queue.ppd") { - # Check PPD directory of GPR, too - run_program::rooted( - $::prefix, - "ln", "-sf", - "/usr/share/postscript/ppd/$queue.ppd", - "/etc/foomatic/$queue.ppd"); - } else { - # No PPD file at all? We cannot set up this printer - next; - } - } - # Add the printer entry - if (!isprinterconfigured($queue, $configfilecontent)) { - # Remove the old printer entry - $configfilecontent = - removeprinter($queue, $configfilecontent); - # Add the new printer entry - $configfilecontent = - makeprinterentry($printer, $queue, - $configfilecontent); - } - } - # Default printer - if ($printer->{DEFAULT}) { - if ($configfilecontent !~ /^\s*Current\-Printer\s*:/m) { - $configfilecontent =~ - s/\n/\nCurrent-Printer: $printer->{DEFAULT}\n/s; - } else { - if ($configfilecontent =~ /^\s*Current\-Printer\s*:\s*(\S+)\s*$/m && - !isprinterconfigured($1, $configfilecontent)) { - $configfilecontent =~ - s/(Current\-Printer\s*:\s*)\S+/$1$printer->{DEFAULT}/; - } - } - } - # Write back GIMP's printer configuration file - writeconfigfile($configfilename, $configfilecontent); - } - return 1; -} - -sub addcupsremoteto { - my ($printer, $queue) = @_; - # Do we have files to treat? - my @configfilenames = findconfigfiles(); - return 1 if $#configfilenames < 0; - my @printerlist = printer::cups::get_remote_queues(); - my $ppdfile = ""; - if ($printer->{SPOOLER} eq "cups" && - (-x "$::prefix/usr/bin/curl" || -x "$::prefix/usr/bin/wget")) { - foreach my $listentry (@printerlist) { - next if $listentry !~ /^([^\|]+)\|([^\|]+)$/; - my $q = $1; - next if $q ne $queue; - my $server = $2; - # Remove server name from queue name - $q =~ s/^([^@]*)@.*$/$1/; - if (-x "$::prefix/usr/bin/wget") { - eval(run_program::rooted( - $::prefix, "/usr/bin/wget", "-O", - "/etc/foomatic/$queue.ppd", - "http://$server:631/printers/$q.ppd")); - } else { - eval(run_program::rooted( - $::prefix, "/usr/bin/curl", "-o", - "/etc/foomatic/$queue.ppd", - "http://$server:631/printers/$q.ppd")); - } - # Does the file exist and is it not an error message? - if (-r "$::prefix/etc/foomatic/$queue.ppd" && - cat_("$::prefix/etc/foomatic/$queue.ppd") =~ /^\*PPD-Adobe/) { - $ppdfile = "/etc/foomatic/$queue.ppd"; - } else { - unlink "$::prefix/etc/foomatic/$queue.ppd"; - return 0; - } - } - } else { return 1 } - # There is no system-wide config file, treat every user's config file - foreach my $configfilename (@configfilenames) { - # Load GIMP's printer config file - my $configfilecontent = readconfigfile($configfilename); - # Add the printer entry - if (!isprinterconfigured($queue, $configfilecontent)) { - # Remove the old printer entry - $configfilecontent = removeprinter($queue, $configfilecontent); - # Add the new printer entry - $configfilecontent = makeprinterentry($printer, $queue, $configfilecontent); - } - # Write back GIMP's printer configuration file - writeconfigfile($configfilename, $configfilecontent); - } - return 1; -} - -sub removeprinterfrom { - my ($_printer, $queue) = @_; - # Do we have files to treat? - my @configfilenames = findconfigfiles(); - return 1 if $#configfilenames < 0; - # There is no system-wide config file, treat every user's config file - foreach my $configfilename (@configfilenames) { - # Load GIMP's printer config file - my $configfilecontent = readconfigfile($configfilename); - # Remove the printer entry - $configfilecontent = removeprinter($queue, $configfilecontent); - # Write back GIMP's printer configuration file - writeconfigfile($configfilename, $configfilecontent); - } - return 1; -} - -sub removelocalprintersfrom { - my ($printer) = @_; - # Do we have files to treat? - my @configfilenames = findconfigfiles(); - return 1 if $#configfilenames < 0; - # There is no system-wide config file, treat every user's config file - foreach my $configfilename (@configfilenames) { - # Load GIMP's printer config file - my $configfilecontent = readconfigfile($configfilename); - # Remove the printer entries - foreach my $queue (keys(%{$printer->{configured}})) { - $configfilecontent = removeprinter($queue, $configfilecontent); - } - # Write back GIMP's printer configuration file - writeconfigfile($configfilename, $configfilecontent); - } - return 1; -} - -sub makeprinterentry { - my ($printer, $queue, $configfile) = @_; - # Make printer's section - $configfile = addprinter($queue, $configfile); - # Load PPD file - my $ppd = cat_("$::prefix/etc/foomatic/$queue.ppd"); - # Is the printer configured with GIMP-Print? - my $gimpprintqueue = 0; - my $gimpprintdriver = "ps2"; - if ($ppd =~ /CUPS\s*\+\s*GIMP\s*\-\s*Print/im) { - # Native CUPS driver - $gimpprintqueue = 1; - $gimpprintdriver = $1 if $ppd =~ /\s*\*ModelName:\s*\"(\S+)\"\s*$/im; - } elsif ($ppd =~ /Foomatic\s*\+\s*gimp\s*\-\s*print/im) { - # GhostScript + Foomatic driver - $gimpprintqueue = 1; - $ppd =~ /\-sModel=((escp2|pcl|bjc|lexmark)\-[^\s\"\']*)/im and - $gimpprintdriver = $1; - } - if ($gimpprintqueue) { - # Get the paper size from the PPD file - if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) { - my $papersize = $1; - $configfile = removeentry($queue, - "Media-Size", $configfile); - $configfile = addentry($queue, - "Media-Size: $papersize", $configfile); - } - $configfile = removeentry($queue, "PPD-File:", $configfile); - $configfile = addentry($queue, "PPD-File:", $configfile); - $configfile = removeentry($queue, "Driver:", $configfile); - $configfile = addentry($queue, "Driver: $gimpprintdriver", $configfile); - $configfile = removeentry($queue, "Destination:", $configfile); - $configfile = addentry($queue, - sprintf("Destination: /usr/bin/%s -P %s -o raw", $spoolers{$printer->{SPOOLER}}{print_command}, $queue), $configfile); - } else { - $configfile = removeentry($queue, "PPD-File:", $configfile); - $configfile = addentry($queue, "PPD-File: /etc/foomatic/$queue.ppd", $configfile); - $configfile = removeentry($queue, "Driver:", $configfile); - $configfile = addentry($queue, "Driver: ps2", $configfile); - $configfile = removeentry($queue, "Destination:", $configfile); - $configfile = addentry($queue, - sprintf("Destination: /usr/bin/%s -P %s", $spoolers{$printer->{SPOOLER}}{print_command}, $queue), $configfile); - } - return $configfile; -} - -sub findconfigfiles() { - my @configfilenames = (if_(-d "$::prefix/usr/lib/gimp/1.2", ".gimp-1.2/printrc"), - if_(-d "$::prefix/usr/lib/gimp/1.3", ".gimp-1.3/printrc"), - if_(-d "$::prefix/usr/lib/gimp/2.0", ".gimp-2.0/printrc")); - return () unless @configfilenames; - my @filestotreat; - foreach (&list_passwd()) { - last if ($#filestotreat > 50); - my ($username, undef, $uid, $gid, undef, undef, undef, $homedir) = @$_; - next if 0 < $uid && $uid < 500 || $username eq "nobody"; - foreach my $file (@configfilenames) { - my $dir = "$homedir/$file"; - $dir =~ s,/[^/]*$,,; - next if -f $dir; - if (! -d "$::prefix$dir") { - eval { mkdir_p("$::prefix$dir") } or next; - run_program::rooted($::prefix, "/bin/chown", "$uid.$gid", $dir) or next; - } - if (! -f "$::prefix$homedir/$file") { - eval { output("$::prefix$homedir/$file", "#PRINTRCv1 written by GIMP-PRINT 4.2.2 - 13 Sep 2002\n") } or next; - run_program::rooted($::prefix, "/bin/chown", "$uid.$gid", "$homedir/$file") or next; - } - push @filestotreat, "$homedir/$file"; - } - } - @filestotreat; -} - -sub readconfigfile { - my ($file) = @_; - local *F; - open F, "< $::prefix$file" or return ""; - my $filecontent = join("", <F>); - close F; - return $filecontent; -} - -sub writeconfigfile { - my ($file, $filecontent) = @_; - local *F; - open F, "> $::prefix$file" or return 0; - print F $filecontent; - close F; - return 1; -} - -sub addentry { - my ($section, $entry, $filecontent) = @_; - my $sectionfound = 0; - my $entryinserted = 0; - my @lines = pop_spaces(split("\n", $filecontent)); - foreach (@lines) { - if (!$sectionfound) { - $sectionfound = 1 if /^\s*Printer\s*:\s*($section)\s*$/; - } else { - if (!/^\s*$/ && !/^\s*;/) { - $_ = "$entry\n$_"; - $entryinserted = 1; - last; - } - } - } - push(@lines, $entry) if $sectionfound && !$entryinserted; - return join("\n", @lines) . "\n"; -} - -sub addprinter { - my ($section, $filecontent) = @_; - foreach (pop_spaces(split("\n", $filecontent))) { - # section already there, nothing to be done - return $filecontent if /^\s*Printer\s*:\s*($section)\s*$/; - } - return $filecontent . "\nPrinter: $section\n"; -} - -sub pop_spaces { - my @lines = @_; - pop @lines while @lines && $lines[-1] !~ /\S/; -} - -sub removeentry { - my ($section, $entry, $filecontent) = @_; - my $sectionfound; - my @lines = pop_spaces(split(/^/, $filecontent)); - foreach (@lines) { - if (!$sectionfound) { - $sectionfound = /^\s*Printer\s*:\s*($section)\s*$/; - } else { - last if /^\s*Printer\s*:\s*.*\s*$/; # Next section - if (/^\s*$entry/) { - $_ = ""; - last; - } - } - } - return join "", @lines; -} - -sub removeprinter { - my ($section, $filecontent) = @_; - my $sectionfound; - my @lines = pop_spaces(split(/^/, $filecontent)); - foreach (@lines) { - if (!$sectionfound) { - if (/^\s*Printer\s*:\s*($section)\s*$/) { - $_ = ""; - $sectionfound = 1; - } - } else { - last if /^\s*Printer\s*:\s*.*\s*$/; # Next section - $_ = ""; - } - } - return join "", @lines; -} - -sub isprinterconfigured { - my ($queue, $filecontent) = @_; - my $sectionfound = 0; - my $done = 0; - my $drivernotps2 = 0; - my $ppdfileset = 0; - my $nonrawprinting = 0; - foreach (split("\n", $filecontent)) { - if (!$sectionfound) { - if (/^\s*Printer\s*:\s*($queue)\s*$/) { - $sectionfound = 1; - } - } else { - if (/^\s*Printer\s*:\s*.*\s*$/) { # Next section - $done = 1; - last; - } elsif (/^\s*Driver:\s*(\S+)\s*$/) { - $drivernotps2 = $1 ne "ps2"; - } elsif (/^\s*PPD\-File:\s*(\S+)\s*$/) { - $ppdfileset = 1; - } elsif (my ($dest) = /^\s*Destination:\s*(\S+.*)$/) { - $nonrawprinting = $dest !~ /\-o\s*raw/; - } - } - } - return 0 if $done && !$sectionfound; # FIXME: IMPOSSIBLE; should be just $done - return 1 if $ppdfileset || $drivernotps2 || $nonrawprinting; - return 0; -} - - -# ------------------------------------------------------------------ - -1; diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm deleted file mode 100644 index fdfbdf317..000000000 --- a/perl-install/printer/main.pm +++ /dev/null @@ -1,2672 +0,0 @@ -package printer::main; - -# $Id$ - -use strict; - -use common; -use run_program; -use printer::data; -use printer::services; -use printer::default; -use printer::gimp; -use printer::cups; -use printer::office; -use printer::detect; -use handle_configs; -use services; -use lang; - -use vars qw(@ISA @EXPORT); - -@ISA = qw(Exporter); -@EXPORT = qw(%printer_type %printer_type_inv); - -#-Did we already read the subroutines of /usr/sbin/ptal-init? -my $ptalinitread = 0; - -our %printer_type = ( - N("Local printer") => "LOCAL", - N("Remote printer") => "REMOTE", - N("Printer on remote CUPS server") => "CUPS", - N("Printer on remote lpd server") => "LPD", - N("Network printer (TCP/Socket)") => "SOCKET", - N("Printer on SMB/Windows 95/98/NT server") => "SMB", - N("Printer on NetWare server") => "NCP", - N("Enter a printer device URI") => "URI", - N("Pipe job into a command") => "POSTPIPE" -); - -our %printer_type_inv = reverse %printer_type; - -our %thedb; - -#------------------------------------------------------------------------------ - -sub spooler() { - # LPD is taken from the menu for the moment because the classic LPD is - # highly unsecure. Depending on how the GNU lpr development is going on - # LPD support can be reactivated by uncommenting the following line. - - #return @spooler_inv{qw(cups lpd lprng pdq)}; - - # LPRng is not officially supported any more since version 9.0 of - # this distribution, so show it only in the spooler menu when it - # was manually installed. - - # PDQ is not officially supported any more since version 9.1, so - # show it only in the spooler menu when it was manually installed. - - return map { $spoolers{$_}{long_name} } qw(cups), - if_(files_exist(qw(/usr/bin/pdq)), 'pdq'), - if_(files_exist(qw(/usr/lib/filters/lpf /usr/sbin/lpd)), 'lprng'); -} - -sub printer_type($) { - my ($printer) = @_; - for ($printer->{SPOOLER}) { - /cups/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB), if_($printer->{expert}, qw(URI))}; - /lpd/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($printer->{expert}, qw(POSTPIPE URI))}; - /lprng/ and return @printer_type_inv{qw(LOCAL LPD SOCKET SMB NCP), if_($printer->{expert}, qw(POSTPIPE URI))}; - /pdq/ and return @printer_type_inv{qw(LOCAL LPD SOCKET), if_($printer->{expert}, qw(URI))}; - } -} - -sub SIGHUP_daemon { - my ($service) = @_; - if ($service eq "cupsd") { $service = "cups" }; - # PDQ has no daemon, exit. - if ($service eq "pdq") { return 1 }; - # CUPS needs auto-correction for its configuration - run_program::rooted($::prefix, "/usr/sbin/correctcupsconfig") if $service eq "cups"; - # Name of the daemon - my %daemons = ( - "lpr" => "lpd", - "lpd" => "lpd", - "lprng" => "lpd", - "cups" => "cupsd", - "devfs" => "devfsd", - ); - my $daemon = $daemons{$service}; - $daemon = $service unless defined $daemon; -# if ($service eq "cups") { -# # The current CUPS (1.1.13) dies on SIGHUP, do the normal restart. -# printer::services::restart($service); -# # CUPS needs some time to come up. -# printer::services::wait_for_cups(); -# } else { - - # Send the SIGHUP - run_program::rooted($::prefix, "/usr/bin/killall", "-HUP", $daemon); - if ($service eq "cups") { - # CUPS needs some time to come up. - printer::services::wait_for_cups(); - } - - return 1; -} - - -sub assure_device_is_available_for_cups { - # Checks whether CUPS already "knows" a certain port, it does not - # know it usually when the appropriate kernel module is loaded - # after CUPS was started or when the printer is turned on after - # CUPS was started. CUPS 1.1.12 and newer refuses to set up queues - # on devices which it does not know, it points these queues to - # file:/dev/null instead. Restart CUPS if necessary to assure that - # CUPS knows the device. - my ($device) = @_; - my $sdevice = handle_configs::searchstr($device); - my ($result, $i); - # USB printers get special model-dependent URLs in "lpinfo -v" here - # checking is complicated, so we simply restart CUPS then and ready. - if ($device =~ /usb/) { - $result = printer::services::restart("cups"); - return 1; - } - my $maxattempts = 3; - for ($i = 0; $i < $maxattempts; $i++) { - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . - '/bin/sh -c "export LC_ALL=C; /usr/sbin/lpinfo -v" |' or - die 'Could not run "lpinfo"!'; - while (my $line = <F>) { - if ($line =~ /$sdevice/) { # Found a line containing the device - # name, so CUPS knows it. - close F; - return 1; - } - } - close F; - $result = printer::services::restart("cups"); - } - return $result; -} - - -sub spooler_in_security_level { - # Was the current spooler already added to the current security level? - my ($spooler, $level) = @_; - my $sp; - $sp = $spooler eq "lpr" || $spooler eq "lprng" ? "lpd" : $spooler; - my $file = "$::prefix/etc/security/msec/server.$level"; - if (-f $file) { - local *F; - open F, "< $file" or return 0; - while (my $line = <F>) { - if ($line =~ /^\s*$sp\s*$/) { - close F; - return 1; - } - } - close F; - } - return 0; -} - -sub add_spooler_to_security_level { - my ($spooler, $level) = @_; - my $sp; - $sp = $spooler eq "lpr" || $spooler eq "lprng" ? "lpd" : $spooler; - my $file = "$::prefix/etc/security/msec/server.$level"; - if (-f $file) { - eval { append_to_file($file, "$sp\n") } or return 0; - } - return 1; -} - -sub pdq_panic_button { - my $setting = $_[0]; - if (-f "$::prefix/usr/sbin/pdqpanicbutton") { - run_program::rooted($::prefix, "/usr/sbin/pdqpanicbutton", "--$setting") - or die "Could not $setting PDQ panic buttons!"; - } -} - -sub copy_printer_params($$) { - my ($from, $to) = @_; - map { $to->{$_} = $from->{$_} } grep { $_ ne 'configured' } keys %$from; - #- avoid cycles-----------------^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ -} - -sub getinfo($) { - my ($prefix) = @_; - my $printer = {}; - - $::prefix = $prefix; - - # Initialize $printer data structure - resetinfo($printer); - - return $printer; -} - -#------------------------------------------------------------------------------ -sub resetinfo($) { - my ($printer) = @_; - $printer->{QUEUE} = ""; - $printer->{OLD_QUEUE} = ""; - $printer->{OLD_CHOICE} = ""; - $printer->{ARGS} = ""; - $printer->{DBENTRY} = ""; - $printer->{DEFAULT} = ""; - $printer->{currentqueue} = {}; - # -check which printing system was used previously and load the information - # -about its queues - read_configured_queues($printer); -} - -sub read_configured_queues($) { - my ($printer) = @_; - my @QUEUES; - # Get the default spooler choice from the config file - $printer->{SPOOLER} ||= printer::default::get_spooler(); - if (!$printer->{SPOOLER}) { - #- Find the first spooler where there are queues - foreach my $spooler (qw(cups pdq lprng lpd)) { - #- Is the spooler's daemon running? - my $service = $spooler; - if ($service eq "lprng") { - $service = "lpd"; - } - if ($service ne "pdq") { - next unless services::is_service_running($service); - # daemon is running, spooler found - $printer->{SPOOLER} = $spooler; - } - #- poll queue info - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . - "foomatic-configure -P -q -s $spooler |" or - die "Could not run foomatic-configure"; - eval join('', <F>); - close F; - if ($service eq "pdq") { - #- Have we found queues? PDQ has no damon, so we consider - #- it in use when there are defined printer queues - if ($#QUEUES != -1) { - $printer->{SPOOLER} = $spooler; - last; - } - } else { - #- For other spoolers we have already found a running - #- daemon when we have arrived here - last; - } - } - } else { - #- Poll the queues of the current default spooler - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . - "foomatic-configure -P -q -s $printer->{SPOOLER} -r |" or - die "Could not run foomatic-configure"; - eval join('', <F>); - close F; - } - $printer->{configured} = {}; - my $i; - my $N = $#QUEUES + 1; - for ($i = 0; $i < $N; $i++) { - # Set the default printer - $printer->{DEFAULT} = $QUEUES[$i]{queuedata}{queue} if - $QUEUES[$i]{queuedata}{default}; - # Advance to the next entry if the current is a remotely defined - # printer - next if $QUEUES[$i]{queuedata}{remote}; - # Add an entry for a locally defined queue - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}} = - $QUEUES[$i]; - if (!$QUEUES[$i]{make} || !$QUEUES[$i]{model}) { - if ($printer->{SPOOLER} eq "cups") { - $printer->{OLD_QUEUE} = $QUEUES[$i]{queuedata}{queue}; - my $descr = get_descr_from_ppd($printer); - if ($descr =~ m/^([^\|]*)\|([^\|]*)(\|.*|)$/) { - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= $1; - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= $2; - } - # Read out which PPD file was originally used to set up this - # queue - local *F; - if (open F, "< $::prefix/etc/cups/ppd/$QUEUES[$i]{queuedata}{queue}.ppd") { - while (my $line = <F>) { - if ($line =~ /^\*%MDKMODELCHOICE:(.+)$/) { - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = $1; - } - } - close F; - } - # Mark that we have a CUPS queue but do not know the name - # the PPD file in /usr/share/cups/model - if (!$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd}) { - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{ppd} = '1'; - } - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{driver} = 'PPD'; - $printer->{OLD_QUEUE} = ""; - } - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} ||= ""; - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} ||= N("Unknown model"); - } else { - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{make} = $QUEUES[$i]{make}; - $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{model} = $QUEUES[$i]{model}; - } - # Fill in "options" field - if (my $args = $printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{args}) { - my @options; - foreach my $arg (@$args) { - push(@options, "-o"); - my $optstr = $arg->{name} . "=" . $arg->{default}; - push(@options, $optstr); - } - @{$printer->{configured}{$QUEUES[$i]{queuedata}{queue}}{queuedata}{options}} = @options; - } - # Construct an entry line for tree view in main window of - # printerdrake - make_menuentry($printer, $QUEUES[$i]{queuedata}{queue}); - } -} - -sub make_menuentry { - my ($printer, $queue) = @_; - my $spooler = $spoolers{$printer->{SPOOLER}}{short_name}; - my $connect = $printer->{configured}{$queue}{queuedata}{connect}; - my $localremote = N("Configured on this machine"); - my $make = $printer->{configured}{$queue}{queuedata}{make}; - my $model = $printer->{configured}{$queue}{queuedata}{model}; - my $connection; - if ($connect =~ m!^(file|parallel):/dev/lp(\d+)$!) { - my $number = $2; - $connection = N(" on parallel port #%s", $number); - } elsif ($connect =~ m!^(file|usb):/dev/usb/lp(\d+)$!) { - my $number = $2; - $connection = N(", USB printer #%s", $number); - } elsif ($connect =~ m!^usb://!) { - $connection = N(", USB printer"); - } elsif ($connect =~ m!^ptal://?(.+?)$!) { - my $ptaldevice = $1; - if ($ptaldevice =~ /^mlc:par:(\d+)$/) { - my $number = $1; - $connection = N(", multi-function device on parallel port #%s", - $number); - } elsif ($ptaldevice =~ /^mlc:par:/) { - $connection = N(", multi-function device on a parallel port"); - } elsif ($ptaldevice =~ /^mlc:usb:/) { - $connection = N(", multi-function device on USB"); - } elsif ($ptaldevice =~ /^hpjd:/) { - $connection = N(", multi-function device on HP JetDirect"); - } else { - $connection = N(", multi-function device"); - } - } elsif ($connect =~ m!^file:(.+)$!) { - $connection = N(", printing to %s", $1); - } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) { - $connection = N(" on LPD server \"%s\", printer \"%s\"", $1, $2); - } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) { - $connection = N(", TCP/IP host \"%s\", port %s", $1, $2); - } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! || - $connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$! || - $connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!) { - $connection = N(" on SMB/Windows server \"%s\", share \"%s\"", $1, $2); - } elsif ($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$! || - $connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$! || - $connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!) { - $connection = N(" on Novell server \"%s\", printer \"%s\"", $1, $2); - } elsif ($connect =~ m!^postpipe:(.+)$!) { - $connection = N(", using command %s", $1); - } else { - $connection = ($printer->{expert} ? ", URI: $connect" : ""); - } - my $sep = "!"; - $printer->{configured}{$queue}{queuedata}{menuentry} = - ($printer->{expert} ? "$spooler$sep" : "") . - "$localremote$sep$queue: $make $model$connection"; -} - -sub connectionstr { - my ($connect) = @_; - my $connection; - if ($connect =~ m!^(file|parallel):/dev/lp(\d+)$!) { - my $number = $2; - $connection = N("Parallel port #%s", $number); - } elsif ($connect =~ m!^(file|usb):/dev/usb/lp(\d+)$!) { - my $number = $2; - $connection = N("USB printer #%s", $number); - } elsif ($connect =~ m!^usb://!) { - $connection = N("USB printer"); - } elsif ($connect =~ m!^ptal://?(.+?)$!) { - my $ptaldevice = $1; - if ($ptaldevice =~ /^mlc:par:(\d+)$/) { - my $number = $1; - $connection = N("Multi-function device on parallel port #%s", - $number); - } elsif ($ptaldevice =~ /^mlc:par:/) { - $connection = N("Multi-function device on a parallel port"); - } elsif ($ptaldevice =~ /^mlc:usb:/) { - $connection = N("Multi-function device on USB"); - } elsif ($ptaldevice =~ /^hpjd:/) { - $connection = N("Multi-function device on HP JetDirect"); - } else { - $connection = N("Multi-function device"); - } - } elsif ($connect =~ m!^file:(.+)$!) { - $connection = N("Prints into %s", $1); - } elsif ($connect =~ m!^lpd://([^/]+)/([^/]+)/?$!) { - $connection = N("LPD server \"%s\", printer \"%s\"", $1, $2); - } elsif ($connect =~ m!^socket://([^/:]+):([^/:]+)/?$!) { - $connection = N("TCP/IP host \"%s\", port %s", $1, $2); - } elsif ($connect =~ m!^smb://([^/\@]+)/([^/\@]+)/?$! || - $connect =~ m!^smb://.*/([^/\@]+)/([^/\@]+)/?$! || - $connect =~ m!^smb://.*\@([^/\@]+)/([^/\@]+)/?$!) { - $connection = N("SMB/Windows server \"%s\", share \"%s\"", $1, $2); - } elsif ($connect =~ m!^ncp://([^/\@]+)/([^/\@]+)/?$! || - $connect =~ m!^ncp://.*/([^/\@]+)/([^/\@]+)/?$! || - $connect =~ m!^ncp://.*\@([^/\@]+)/([^/\@]+)/?$!) { - $connection = N("Novell server \"%s\", printer \"%s\"", $1, $2); - } elsif ($connect =~ m!^postpipe:(.+)$!) { - $connection = N("Uses command %s", $1); - } else { - $connection = N("URI: %s", $connect); - } - return $connection; -} - -sub read_printer_db { - - my ($printer, $spooler) = @_; - - local *DBPATH; #- don't have to do close ... and don't modify globals at least - # Generate the Foomatic printer/driver overview, read it from the - # appropriate file when it is already generated - open DBPATH, ($::testing ? $::prefix : "chroot $::prefix/ ") . #-# - "foomatic-configure -O -q |" or - die "Could not run foomatic-configure"; - - my $entry = {}; - my $inentry = 0; - my $indrivers = 0; - my $inautodetect = 0; - my $autodetecttype = ""; - local $_; - while (<DBPATH>) { - chomp; - if ($inentry) { - # We are inside a printer entry - if ($indrivers) { - # We are inside the drivers block of a printers entry - if (m!^\s*</drivers>\s*$!) { - # End of drivers block - $indrivers = 0; - } elsif (m!^\s*<driver>(.+)</driver>\s*$!) { - push @{$entry->{drivers}}, $1; - } - } elsif ($inautodetect) { - # We are inside the autodetect block of a printers entry - # All entries inside this block will be ignored - if ($autodetecttype) { - if (m!^.*</$autodetecttype>\s*$!) { - # End of general, parallel, USB, or SNMP section - $autodetecttype = ""; - } elsif (m!^\s*<manufacturer>\s*([^<>]+)\s*</manufacturer>\s*$!) { - # Manufacturer - $entry->{devidmake} = $1; - } elsif (m!^\s*<model>\s*([^<>]+)\s*</model>\s*$!) { - # Model - $entry->{devidmodel} = $1; - } elsif (m!^\s*<description>\s*([^<>]+)\s*</description>\s*$!) { - # Description - $entry->{deviddesc} = $1; - } elsif (m!^\s*<commandset>\s*([^<>]+)\s*</commandset>\s*$!) { - # Command set - $entry->{devidcmdset} = $1; - } elsif (m!^\s*<ieee1284>\s*([^<>]+)\s*</ieee1284>\s*$!) { - # Full ID string - my $idstr = $1; - $idstr =~ m!(MFG|MANUFACTURER):([^;]+);!i - and $entry->{devidmake} = $2; - $idstr =~ m!(MDL|MODEL):([^;]+);!i - and $entry->{devidmodel} = $2; - $idstr =~ m!(DES|DESCRIPTION):([^;]+);!i - and $entry->{deviddesc} = $2; - $idstr =~ m!(CMD|COMMAND\s*SET):([^;]+);!i - and $entry->{devidcmdset} = $2; - } - } else { - if (m!^.*</autodetect>\s*$!) { - # End of autodetect block - $inautodetect = 0; - } elsif (m!^\s*<(general|parallel|usb|snmp)>\s*$!) { - # Beginning of parallel, USB, or SNMP section - $autodetecttype = $1; - } - } - } else { - if (m!^\s*</printer>\s*$!) { - # entry completed - $inentry = 0; - # Expert mode: - # Make one database entry per driver with the entry name - # manufacturer|model|driver - if ($printer->{expert}) { - foreach my $driver (@{$entry->{drivers}}) { - my $driverstr; - if ($driver eq "Postscript") { - $driverstr = "PostScript"; - } else { - $driverstr = "GhostScript + $driver"; - } - if ($driver eq $entry->{defaultdriver}) { - $driverstr .= " (recommended)"; - } - $entry->{ENTRY} = "$entry->{make}|$entry->{model}|$driverstr"; - $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i; - $entry->{ENTRY} =~ - s/^KYOCERA[\s\-]*MITA/KYOCERA/i; - $entry->{driver} = $driver; - # Duplicate contents of $entry because it is multiply entered to the database - map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry; - } - } else { - # Recommended mode - # Make one entry per printer, with the recommended - # driver (manufacturerer|model) - $entry->{ENTRY} = "$entry->{make}|$entry->{model}"; - $entry->{ENTRY} =~ s/^CITOH/C.ITOH/i; - $entry->{ENTRY} =~ - s/^KYOCERA[\s\-]*MITA/KYOCERA/i; - if ($entry->{defaultdriver}) { - $entry->{driver} = $entry->{defaultdriver}; - map { $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} } keys %$entry; - } - } - $entry = {}; - } elsif (m!^\s*<id>\s*([^\s<>]+)\s*</id>\s*$!) { - # Foomatic printer ID - $entry->{printer} = $1; - } elsif (m!^\s*<make>(.+)</make>\s*$!) { - # Printer manufacturer - $entry->{make} = uc($1); - } elsif (m!^\s*<model>(.+)</model>\s*$!) { - # Printer model - $entry->{model} = $1; - } elsif (m!<driver>(.+)</driver>!) { - # Printer default driver - $entry->{defaultdriver} = $1; - } elsif (m!^\s*<drivers>\s*$!) { - # Drivers block - $indrivers = 1; - @{$entry->{drivers}} = (); - } elsif (m!^\s*<autodetect>\s*$!) { - # Autodetect block - $inautodetect = 1; - } - } - } else { - if (m!^\s*<printer>\s*$!) { - # new entry - $inentry = 1; - } - } - } - close DBPATH; - - # Add raw queue - $entry->{ENTRY} = N("Raw printer (No driver)"); - $entry->{driver} = "raw"; - $entry->{make} = ""; - $entry->{model} = N("Unknown model"); - $thedb{$entry->{ENTRY}}{$_} = $entry->{$_} foreach keys %$entry; - - #- Load CUPS driver database if CUPS is used as spooler - if ($spooler && $spooler eq "cups") { - poll_ppd_base($printer); - } - - #my @entries_db_short = sort keys %printer::thedb; - #%descr_to_db = map { $printer::thedb{$_}{DESCR}, $_ } @entries_db_short; - #%descr_to_help = map { $printer::thedb{$_}{DESCR}, $printer::thedb{$_}{ABOUT} } @entries_db_short; - #@entry_db_description = keys %descr_to_db; - #db_to_descr = reverse %descr_to_db; - -} - -sub read_foomatic_options ($) { - my ($printer) = @_; - # Generate the option data for the chosen printer/driver combo - my $COMBODATA; - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . - "foomatic-configure -P -q -p $printer->{currentqueue}{printer}" . - " -d $printer->{currentqueue}{driver}" . - ($printer->{OLD_QUEUE} ? - " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") . - ($printer->{SPECIAL_OPTIONS} ? - " $printer->{SPECIAL_OPTIONS}" : "") - . " |" or - die "Could not run foomatic-configure"; - eval join('', (<F>)); - close F; - # Return the arguments field - return $COMBODATA->{args}; -} - -sub read_ppd_options ($) { - my ($printer) = @_; - # Generate the option data for a given PPD file - my $COMBODATA; - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . - "foomatic-configure -P -q" . - " --ppd /usr/share/cups/model/$printer->{currentqueue}{ppd}" . - ($printer->{OLD_QUEUE} ? - " -s $printer->{SPOOLER} -n $printer->{OLD_QUEUE}" : "") . - ($printer->{SPECIAL_OPTIONS} ? - " $printer->{SPECIAL_OPTIONS}" : "") - . " |" or - die "Could not run foomatic-configure"; - eval join('', (<F>)); - close F; - # Return the arguments field - return $COMBODATA->{args}; -} - -my %sysconfig = getVarsFromSh("$::prefix/etc/sysconfig/printing"); - -sub set_cups_special_options { - my ($queue) = $_[0]; - # Set some special CUPS options - my @lpoptions = chomp_(cat_("$::prefix/etc/cups/lpoptions")); - # If nothing is already configured, set text file borders of half an inch - # and decrease the font size a little bit, so nothing of the text gets - # cut off by unprintable borders. - if (!any { /$queue.*\s(page-(top|bottom|left|right)|lpi|cpi)=/ } @lpoptions) { - run_program::rooted($::prefix, "lpoptions", - "-p", $queue, - "-o", "page-top=36", "-o", "page-bottom=36", - "-o", "page-left=36", "-o page-right=36", - "-o", "cpi=12", "-o", "lpi=7", "-o", "wrap"); - } - # Let images fill the whole page by default - if (!any { /$queue.*\s(scaling|natural-scaling|ppi)=/ } @lpoptions) { - run_program::rooted($::prefix, "lpoptions", - "-p", $queue, - "-o", "scaling=100"); - } - return 1; -} - -sub set_cups_autoconf { - my ($autoconf) = @_; - $sysconfig{CUPS_CONFIG} = $autoconf ? "automatic" : "manual"; - setVarsInSh("$::prefix/etc/sysconfig/printing", \%sysconfig); - # Restart CUPS - printer::services::restart("cups") if $autoconf; - return 1; -} - -sub get_cups_autoconf() { $sysconfig{CUPS_CONFIG} ne 'manual' ? 1 : 0 } - -sub set_usermode { - my ($usermode) = @_; - $sysconfig{USER_MODE} = $usermode ? "expert" : "recommended"; - setVarsInSh("$::prefix/etc/sysconfig/printing", \%sysconfig) if !$::testing; - return $usermode; -} - -sub get_usermode() { $sysconfig{USER_MODE} eq 'expert' ? 1 : 0 } - -sub set_jap_textmode { - my $textmode = ($_[0] ? 'cjk' : ''); - substInFile { - s!^(\s*text/plain\s+\S+\s+\d+\s+)\S+(\s*$)!$1${textmode}texttops$2! - } "$::prefix/etc/cups/mime.convs"; - return 1; -} - -sub get_jap_textmode() { - my @mimeconvs = cat_("$::prefix/etc/cups/mime.convs"); - (m!^\s*text/plain\s+\S+\s+\d+\s+(\S+)\s*$!m and - $1 eq 'cjktexttops' and return 1) foreach @mimeconvs; - return 0; -} - -#---------------------------------------------------------------------- -# Handling of /etc/cups/cupsd.conf - -sub read_cupsd_conf() { - cat_("$::prefix/etc/cups/cupsd.conf"); -} -sub write_cupsd_conf { - my (@cupsd_conf) = @_; - - output("$::prefix/etc/cups/cupsd.conf", @cupsd_conf); - - #- restart cups after updating configuration. - printer::services::restart("cups"); -} - -sub read_location { - - # Return the lines inside the [path] location block - # - # <Location [path]> - # ... - # </Location> - - my ($cupsd_conf_ptr, $path) = @_; - - my @result; - if (any { m!^\s*<Location\s+$path\s*>! } @$cupsd_conf_ptr) { - my $location_start = -1; - my $location_end = -1; - # Go through all the lines, bail out when start and end line found - for (my $i = 0; - $i <= $#{$cupsd_conf_ptr} and $location_end == -1; - $i++) { - if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) { - # Start line of block - $location_start = $i; - } elsif ($cupsd_conf_ptr->[$i] =~ - m!^\s*<\s*/Location\s*>! && - $location_start != -1) { - # End line of block - $location_end = $i; - last; - } elsif ($location_start >= 0 && $location_end < 0) { - # Inside the location block - push(@result, $cupsd_conf_ptr->[$i]); - } - } - } else { - # If there is no root location block, set the result array to - # "undef" - @result = undef; - } - return (@result); -} - -sub rip_location { - - # Cut out the [path] location block - # - # <Location [path]> - # ... - # </Location> - # - # so that it can be treated seperately without affecting the - # rest of the file - - my ($cupsd_conf_ptr, $path) = @_; - - my @location; - my $location_start = -1; - my $location_end = -1; - if (any { m!^\s*<Location\s+$path\s*>! } @$cupsd_conf_ptr) { - # Go through all the lines, bail out when start and end line found - for (my $i = 0; - $i <= $#{$cupsd_conf_ptr} and $location_end == -1; - $i++) { - if ($cupsd_conf_ptr->[$i] =~ m!^\s*<\s*Location\s+$path\s*>!) { - # Start line of block - $location_start = $i; - } elsif ($cupsd_conf_ptr->[$i] =~ - m!^\s*<\s*/Location\s*>! && - $location_start != -1) { - # End line of block - $location_end = $i; - last; - } - } - # Rip out the block and store it seperately - @location = - splice(@$cupsd_conf_ptr, $location_start, - $location_end - $location_start + 1); - } else { - # If there is no location block, create one - $location_start = $#{$cupsd_conf_ptr} + 1; - @location = ("<Location $path>\n", "</Location>\n"); - } - - return ($location_start, @location); -} - -sub insert_location { - - # Re-insert a location block ripped with "rip_location" - - my ($cupsd_conf_ptr, $location_start, @location) = @_; - - splice(@$cupsd_conf_ptr, $location_start,0,@location); -} - -sub add_to_location { - - # Add a directive to a given location (only if it is not already there) - - my ($cupsd_conf_ptr, $path, $directive) = @_; - - my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path); - my $success = handle_configs::insert_directive(\@location, $directive); - insert_location($cupsd_conf_ptr, $location_start, @location); - return $success; -} - -sub remove_from_location { - - # Remove a directive from a given location - - my ($cupsd_conf_ptr, $path, $directive) = @_; - - my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path); - my $success = handle_configs::remove_directive(\@location, $directive); - insert_location($cupsd_conf_ptr, $location_start, @location); - return $success; -} - -sub replace_in_location { - - # Replace a directive in a given location - - my ($cupsd_conf_ptr, $path, $olddirective, $newdirective) = @_; - - my ($location_start, @location) = rip_location($cupsd_conf_ptr, $path); - my $success = handle_configs::replace_directive(\@location, - $olddirective, - $newdirective); - insert_location($cupsd_conf_ptr, $location_start, @location); - return $success; -} - -sub add_allowed_host { - - # Add a host or network which should get access to the local printer(s) - my ($cupsd_conf_ptr, $host) = @_; - - return (handle_configs::insert_directive($cupsd_conf_ptr, - "BrowseAddress $host") and - add_to_location($cupsd_conf_ptr, "/", "Allow From $host")); -} - -sub remove_allowed_host { - - # Remove a host or network which should get access to the local - # printer(s) - my ($cupsd_conf_ptr, $host) = @_; - - return (handle_configs::remove_directive($cupsd_conf_ptr, "BrowseAddress $host") and - remove_from_location($cupsd_conf_ptr, "/", - "Allow From $host")); -} - -sub replace_allowed_host { - - # Remove a host or network which should get access to the local - # printer(s) - my ($cupsd_conf_ptr, $oldhost, $newhost) = @_; - - return (handle_configs::replace_directive($cupsd_conf_ptr, - "BrowseAddress $oldhost", - "BrowseAddress $newhost") and - replace_in_location($cupsd_conf_ptr, "/", "Allow From $newhost", - "Allow From $newhost")); -} - -sub broadcastaddress { - - # Determines the broadcast address (for "BrowseAddress" line) for - # a given network IP - - my ($address) = @_; - - if ($address =~ /^\d+\.\*$/) { - $address =~ s/\*$/255.255.255/; - } elsif ($address =~ /^\d+\.\d+\.\*$/) { - $address =~ s/\*$/255.255/; - } elsif ($address =~ /^\d+\.\d+\.\d+\.\*$/) { - $address =~ s/\*$/255/; - } elsif ($address =~ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)$!) { - my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4; - my $mask = ((1 << $5) - 1) << (32 - $5); - my $broadcast = $numadr | (~$mask); - $address = - (($broadcast & (255 << 24)) >> 24) . '.' . - (($broadcast & (255 << 16)) >> 16) . '.' . - (($broadcast & (255 << 8)) >> 8) . '.' . - ($broadcast & 255); - } elsif ($address =~ - m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)\.(\d+)\.(\d+)\.(\d+)$!) { - my $numadr = ($1 << 24) + ($2 << 16) + ($3 << 8) + $4; - my $mask = ($5 << 24) + ($6 << 16) + ($7 << 8) + $8; - my $broadcast = $numadr | (~$mask); - $address = - (($broadcast & (255 << 24)) >> 24) . '.' . - (($broadcast & (255 << 16)) >> 16) . '.' . - (($broadcast & (255 << 8)) >> 8) . '.' . - ($broadcast & 255); - } - - return $address; -} - -sub networkaddress { - - # Guesses a network address for a given broadcast address - - my ($address) = @_; - - if ($address =~ /\.255$/) { - while ($address =~ s/\.255$//) {}; - $address .= ".*"; - } - - return $address; -} - -sub localprintersshared { - - # Do we broadcast our local printers - - my ($printer) = @_; - - return ($printer->{cupsconfig}{keys}{Browsing} !~ /off/i && - $printer->{cupsconfig}{keys}{BrowseInterval} != 0 && - $#{$printer->{cupsconfig}{keys}{BrowseAddress}} >= 0); -} - -sub remotebroadcastsaccepted { - - # Do we accept broadcasts from remote CUPS servers? - - my ($printer) = @_; - - # Is browsing not turned on at all? - if ($printer->{cupsconfig}{keys}{Browsing} =~ /off/i) { - return 0; - } - - # No "BrowseDeny" lines at all - if ($#{$printer->{cupsconfig}{keys}{BrowseDeny}} < 0) { - return 1; - } - - my $havedenyall = - join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~ - /All/im; - my $havedenylocal = - join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~ - /\@LOCAL/im; - my $orderallowdeny = - $printer->{cupsconfig}{keys}{BrowseOrder} =~ - /allow\s*,\s*deny/i; - my $haveallowremote = 0; - foreach my $allowline (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) { - next if - $allowline =~ /^\s*(localhost|0*127\.0+\.0+\.0*1|none)\s*$/i; - $haveallowremote = 1; - } - - # A line denying all (or at least the all LANs) together with the order - # "allow,deny" or without "BrowseAllow" lines (which allow the - # broadcasts of at least one remote resource). - if (($havedenyall || $havedenylocal) && - ($orderallowdeny || !$haveallowremote)) { - return 0; - } - - return 1; -} - -sub clientnetworks { - - # Determine the client networks to which the printers will be - # shared If the configuration is supported by our simplified - # interface ("Deny From All", "Order Deny,Allow", "Allow From ..." - # lines in "<location /> ... </location>", a "BrowseAddress ..." - # line for each "Allow From ..." line), return the list of allowed - # client networks ("Allow"/"BrowseAddress" lines), if not, return - # the list of all items which are at least one of the - # "BrowseAddresse"s or one of the "Allow From" addresses together - # with a flag that the setup is not supported. - - my ($printer) = @_; - - # Check for a "Deny From All" line - my $havedenyfromall = - (join('', @{$printer->{cupsconfig}{root}{DenyFrom}}) =~ - /All/im ? 1 : 0); - - # Check for "Deny From XXX" with XXX != All - my $havedenyfromnotall = - ($#{$printer->{cupsconfig}{root}{DenyFrom}} - $havedenyfromall < 0 ? - 0 : 1); - - # Check for a "BrowseDeny All" line - my $havebrowsedenyall = - (join('', @{$printer->{cupsconfig}{keys}{BrowseDeny}}) =~ - /All/im ? 1 : 0); - - # Check for "BrowseDeny XXX" with XXX != All - my $havebrowsedenynotall = - ($#{$printer->{cupsconfig}{keys}{BrowseDeny}} - - $havebrowsedenyall < 0 ? 0 : 1); - - my @sharehosts; - my $haveallowfromlocalhost = 0; - my $haveallowedhostwithoutbrowseaddress = 0; - my $haveallowedhostwithoutbrowseallow = 0; - # Go through all "Allow From" lines - foreach my $line (@{$printer->{cupsconfig}{root}{AllowFrom}}) { - if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) { - # Line pointing to localhost - $haveallowfromlocalhost = 1; - } elsif ($line =~ /^\s*(none)\s*$/i) { - # Skip "Allow From None" lines - } elsif (!member($line, @sharehosts)) { - # Line pointing to remote server - push(@sharehosts, $line); - if (!member(broadcastaddress($line), - @{$printer->{cupsconfig}{keys}{BrowseAddress}})) { - $haveallowedhostwithoutbrowseaddress = 1; - } - if (!member($line, - @{$printer->{cupsconfig}{keys}{BrowseAllow}})) { - $haveallowedhostwithoutbrowseallow = 1; - } - } - } - my $havebrowseaddresswithoutallowedhost = 0; - # Go through all "BrowseAdress" lines - foreach my $line (@{$printer->{cupsconfig}{keys}{BrowseAddress}}) { - if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) { - # Skip lines pointing to localhost - } elsif ($line =~ /^\s*(none)\s*$/i) { - # Skip "Allow From None" lines - } elsif (!member($line, map { broadcastaddress($_) } @sharehosts)) { - # Line pointing to remote server - push(@sharehosts, networkaddress($line)); - if ($printer->{cupsconfig}{localprintersshared}) { - $havebrowseaddresswithoutallowedhost = 1; - } - } - } - my $havebrowseallowwithoutallowedhost = 0; - # Go through all "BrowseAllow" lines - foreach my $line (@{$printer->{cupsconfig}{keys}{BrowseAllow}}) { - if ($line =~ /^\s*(localhost|0*127\.0+\.0+\.0*1)\s*$/i) { - # Skip lines pointing to localhost - } elsif ($line =~ /^\s*(none)\s*$/i) { - # Skip "BrowseAllow None" lines - } elsif (!member($line, @sharehosts)) { - # Line pointing to remote server - push(@sharehosts, $line); - #$havebrowseallowwithoutallowedhost = 1; - } - } - - my $configunsupported = (!$havedenyfromall || $havedenyfromnotall || - !$havebrowsedenyall || $havebrowsedenynotall || - !$haveallowfromlocalhost || - $haveallowedhostwithoutbrowseaddress || - $havebrowseaddresswithoutallowedhost || - $haveallowedhostwithoutbrowseallow || - $havebrowseallowwithoutallowedhost); - - return ($configunsupported, @sharehosts); -} - -sub makesharehostlist { - - # Human-readable strings for hosts onto which the local printers - # are shared - - my ($printer) = @_; - - my @sharehostlist; - my %sharehosthash; - foreach my $host (@{$printer->{cupsconfig}{clientnetworks}}) { - if ($host =~ /\@LOCAL/i) { - $sharehosthash{$host} = N("Local network(s)"); - } elsif ($host =~ /\@IF\((.*)\)/i) { - $sharehosthash{$host} = N("Interface \"%s\"", $1); - } elsif ($host =~ m!(/|^\*|\*$|^\.)!) { - $sharehosthash{$host} = N("Network %s", $host); - } else { - $sharehosthash{$host} = N("Host %s", $host); - } - push(@sharehostlist, $sharehosthash{$host}); - } - my %sharehosthash_inv = reverse %sharehosthash; - - return { list => \@sharehostlist, - hash => \%sharehosthash, - invhash => \%sharehosthash_inv }; -} - -sub makebrowsepolllist { - - # Human-readable strings for hosts from which the print queues are - # polled - - my ($printer) = @_; - - my @browsepolllist; - my %browsepollhash; - foreach my $host (@{$printer->{cupsconfig}{BrowsePoll}}) { - my ($ip, $port); - if ($host =~ /^([^:]+):([^:]+)$/) { - $ip = $1; - $port = $2; - } else { - $ip = $host; - $port = '631'; - } - $browsepollhash{$host} = N("%s (Port %s)", $ip, $port); - push(@browsepolllist, $browsepollhash{$host}); - } - my %browsepollhash_inv = reverse %browsepollhash; - - return { list => \@browsepolllist, - hash => \%browsepollhash, - invhash => \%browsepollhash_inv }; -} - -sub is_network_ip { - - # Determine whwther the given string is a valid network IP - - my ($address) = @_; - - $address =~ /^(\d+)\.(\d+)\.(\d+)\.(\d+)$/ || - $address =~ /^(\d+\.){1,3}\*$/ || - $address =~ m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)$! || - $address =~ - m!^(\d+)\.(\d+)\.(\d+)\.(\d+)/(\d+)\.(\d+)\.(\d+)\.(\d+)$!; - -} - -sub read_cups_config { - - # Read the information relevant to the printer sharing dialog from - # the CUPS configuration - - my ($printer) = @_; - - # From /etc/cups/cupsd.conf - - # Keyword "Browsing" - $printer->{cupsconfig}{keys}{Browsing} = - handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf}, - 'Browsing', 'On'); - - # Keyword "BrowseInterval" - $printer->{cupsconfig}{keys}{BrowseInterval} = - handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseInterval', '30'); - - # Keyword "BrowseAddress" - @{$printer->{cupsconfig}{keys}{BrowseAddress}} = - handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf}, - 'BrowseAddress'); - - # Keyword "BrowseAllow" - @{$printer->{cupsconfig}{keys}{BrowseAllow}} = - handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf}, - 'BrowseAllow'); - - # Keyword "BrowseDeny" - @{$printer->{cupsconfig}{keys}{BrowseDeny}} = - handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf}, - 'BrowseDeny'); - - # Keyword "BrowseOrder" - $printer->{cupsconfig}{keys}{BrowseOrder} = - handle_configs::read_unique_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseOrder', 'deny,allow'); - - # Keyword "BrowsePoll" (needs "Browsing On") - if ($printer->{cupsconfig}{keys}{Browsing} !~ /off/i) { - @{$printer->{cupsconfig}{BrowsePoll}} = - handle_configs::read_directives($printer->{cupsconfig}{cupsd_conf}, - 'BrowsePoll'); - } - - # Root location - @{$printer->{cupsconfig}{rootlocation}} = - read_location($printer->{cupsconfig}{cupsd_conf}, '/'); - - # Keyword "Allow from" - @{$printer->{cupsconfig}{root}{AllowFrom}} = - handle_configs::read_directives($printer->{cupsconfig}{rootlocation}, - 'Allow From'); - # Remove the IPs pointing to the local machine - my @localips = printer::detect::getIPsOfLocalMachine(); - @{$printer->{cupsconfig}{root}{AllowFrom}} = - grep { - !member($_, @localips) - } @{$printer->{cupsconfig}{root}{AllowFrom}}; - - # Keyword "Deny from" - @{$printer->{cupsconfig}{root}{DenyFrom}} = - handle_configs::read_directives($printer->{cupsconfig}{rootlocation}, - 'Deny From'); - - # Keyword "Order" - $printer->{cupsconfig}{root}{Order} = - handle_configs::read_unique_directive($printer->{cupsconfig}{rootlocation}, - 'Order', 'Deny,Allow'); - - # Widget settings - - # Local printers available to other machines? - $printer->{cupsconfig}{localprintersshared} = - localprintersshared($printer); - - # This machine is accepting printers shared by remote machines? - $printer->{cupsconfig}{remotebroadcastsaccepted} = - remotebroadcastsaccepted($printer); - - # To which machines are the local printers available? - ($printer->{cupsconfig}{customsharingsetup}, - @{$printer->{cupsconfig}{clientnetworks}}) = - clientnetworks($printer); - -} - -sub write_cups_config { - - # Write the information edited via the printer sharing dialog into - # the CUPS configuration - - my ($printer) = @_; - - # Local printers available to other machines? - if ($printer->{cupsconfig}{localprintersshared}) { - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'Browsing On'); - if ($printer->{cupsconfig}{keys}{BrowseInterval} == 0) { - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseInterval 30'); - } - } else { - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseInterval 0'); - } - - # This machine is accepting printers shared by remote machines? - if ($printer->{cupsconfig}{remotebroadcastsaccepted}) { - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'Browsing On'); - if (!$printer->{cupsconfig}{customsharingsetup}) { - # If we broadcast our printers, let's accept the broadcasts - # from the machines to which we broadcast - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseDeny All'); - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseOrder Deny,Allow'); - } - } else { - if ($printer->{cupsconfig}{localprintersshared} || - $#{$printer->{cupsconfig}{BrowsePoll}} >= 0) { - # Deny all broadcasts, but leave all "BrowseAllow" lines - # untouched - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseDeny All'); - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseOrder Allow,Deny'); - } else { - # We also do not share printers, if we also do not - # "BrowsePoll", we turn browsing off to do not need to deal - # with any addresses - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'Browsing Off'); - } - } - - # To which machines are the local printers available? - if (!$printer->{cupsconfig}{customsharingsetup}) { - my @localips = printer::detect::getIPsOfLocalMachine(); - # root location block - @{$printer->{cupsconfig}{rootlocation}} = - "<Location />\n" . - "Order Deny,Allow\n" . - "Deny From All\n" . - "Allow From 127.0.0.1\n" . - (@localips ? - "Allow From " . - join("\nAllow From ", @localips) . - "\n" : "") . - ($printer->{cupsconfig}{localprintersshared} && - $#{$printer->{cupsconfig}{clientnetworks}} >= 0 ? - "Allow From " . - join("\nAllow From ", - grep { - !member($_, @localips) - } @{$printer->{cupsconfig}{clientnetworks}}) . - "\n" : "") . - "</Location>\n"; - my ($location_start, @_location) = - rip_location($printer->{cupsconfig}{cupsd_conf}, "/"); - insert_location($printer->{cupsconfig}{cupsd_conf}, $location_start, - @{$printer->{cupsconfig}{rootlocation}}); - # "BrowseAddress" lines - if ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) { - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseAddress ' . - join("\nBrowseAddress ", - map { broadcastaddress($_) } - @{$printer->{cupsconfig}{clientnetworks}})); - } else { - handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseAddress') - } - # Set "BrowseAllow" lines - if ($#{$printer->{cupsconfig}{clientnetworks}} >= 0) { - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseAllow ' . - join("\nBrowseAllow ", - @{$printer->{cupsconfig}{clientnetworks}})); - } else { - handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowseAllow'); - } - } - - # Set "BrowsePoll" lines - if ($#{$printer->{cupsconfig}{BrowsePoll}} >= 0) { - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowsePoll ' . - join("\nBrowsePoll ", - @{$printer->{cupsconfig}{BrowsePoll}})); - # "Browsing" must be on for "BrowsePoll" to work - handle_configs::set_directive($printer->{cupsconfig}{cupsd_conf}, - 'Browsing On'); - } else { - handle_configs::comment_directive($printer->{cupsconfig}{cupsd_conf}, - 'BrowsePoll'); - } - -} - -sub clean_cups_config { - - # Clean $printer data structure from all settings not related to - # the CUPS printer sharing dialog - - my ($printer) = @_; - - delete $printer->{cupsconfig}{keys}; - delete $printer->{cupsconfig}{root}; - delete $printer->{cupsconfig}{cupsd_conf}; - delete $printer->{cupsconfig}{rootlocation}; -} - -#---------------------------------------------------------------------- -sub read_printers_conf { - my ($printer) = @_; - my $current; - - #- read /etc/cups/printers.conf file. - #- according to this code, we are now using the following keys for each queues. - #- DeviceURI > lpd://printer6/lp - #- Info > Info Text - #- Location > Location Text - #- State > Idle|Stopped - #- Accepting > Yes|No - local *PRINTERS; open PRINTERS, "$::prefix/etc/cups/printers.conf" or return; - local $_; - while (<PRINTERS>) { - chomp; - /^\s*#/ and next; - if (/^\s*<(?:DefaultPrinter|Printer)\s+([^>]*)>/) { $current = { mode => 'cups', QUEUE => $1, } } - elsif (m!\s*</Printer>!) { $current->{QUEUE} && $current->{DeviceURI} or next; #- minimal check of synthax. - add2hash($printer->{configured}{$current->{QUEUE}} ||= {}, $current); $current = undef } - elsif (/\s*(\S*)\s+(.*)/) { $current->{$1} = $2 } - } - close PRINTERS; - - #- assume this printing system. - $printer->{SPOOLER} ||= 'cups'; -} - -sub get_direct_uri() { - #- get the local printer to access via a Device URI. - my @direct_uri; - local *F; open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/sbin/lpinfo -v |"; - local $_; - while (<F>) { - /^(direct|usb|serial)\s+(\S*)/ and push @direct_uri, $2; - } - close F; - @direct_uri; -} - -sub checkppd { - # Check whether the PPD file is valid - my ($printer, $ppdfile) = @_; - return 1 if $printer->{SPOOLER} ne "cups"; - return run_program::rooted($::prefix, "cupstestppd", "-q", - $ppdfile); -} - -sub installppd { - # Install the PPD file in /usr/share/cups/model/printerdrake/ - my ($printer, $ppdfile) = @_; - return "" if !$ppdfile; - # Install PPD file - mkdir_p("$::prefix/usr/share/cups/model/printerdrake"); - # "cp_f()" is broken, it hangs infinitely - # cp_f($ppdfile, "$::prefix/usr/share/cups/model/printerdrake"); - run_program::rooted($::prefix, "cp", "-f", "$ppdfile", - "$::prefix/usr/share/cups/model/printerdrake"); - $ppdfile =~ s!^(.*)(/[^/]+)$!/usr/share/cups/model/printerdrake$2!; - chmod 0644, "$::prefix$ppdfile"; - # Restart CUPS to register new PPD file - printer::services::restart("cups") if $printer->{SPOOLER} eq "cups"; - # Re-read printer database - %thedb = (); - read_printer_db($printer, $printer->{SPOOLER}); - # Return description string of the PPD file - my $ppdentry = get_descr_from_ppdfile($printer, $ppdfile); - return $ppdentry; -} - -sub clean_manufacturer_name { - my ($make) = @_; - # Clean some manufacturer's names so that every manufacturer has only - # one entry in the tree list - $make =~ s/^CANON\W.*$/CANON/i; - $make =~ s/^LEXMARK.*$/LEXMARK/i; - $make =~ s/^HEWLETT?[\s\-]*PACKARD/HP/i; - $make =~ s/^SEIKO[\s\-]*EPSON/EPSON/i; - $make =~ s/^KYOCERA[\s\-]*MITA/KYOCERA/i; - $make =~ s/^CITOH/C.ITOH/i; - $make =~ s/^OKI(|[\s\-]*DATA)\s*$/OKIDATA/i; - $make =~ s/^(SILENTWRITER2?|COLORMATE)/NEC/i; - $make =~ s/^(XPRINT|MAJESTIX)/XEROX/i; - $make =~ s/^QMS-PS/QMS/i; - $make =~ s/^(PERSONAL|LASERWRITER)/APPLE/i; - $make =~ s/^DIGITAL/DEC/i; - $make =~ s/\s+Inc\.//i; - $make =~ s/\s+Corp\.//i; - $make =~ s/\s+SA\.//i; - $make =~ s/\s+S\.\s*A\.//i; - $make =~ s/\s+Ltd\.//i; - $make =~ s/\s+International//i; - $make =~ s/\s+Int\.//i; - return uc($make); -} - -sub ppd_entry_str { - my ($mf, $descr, $lang) = @_; - my ($model, $driver); - if ($descr) { - # Apply the beautifying rules of poll_ppd_base - if ($descr =~ /Foomatic \+ Postscript/) { - $descr =~ s/Foomatic \+ Postscript/PostScript/; - } elsif ($descr =~ /Foomatic/i) { - $descr =~ s/Foomatic/GhostScript/i; - } elsif ($descr =~ /CUPS\+GIMP-print/i) { - $descr =~ s/CUPS\+GIMP-print/CUPS + GIMP-Print/i; - } elsif ($descr =~ /Series CUPS/i) { - $descr =~ s/Series CUPS/Series, CUPS/i; - } elsif ($descr !~ /(PostScript|GhostScript|CUPS|Foomatic)/i) { - $descr .= ", PostScript"; - } - # Split model and driver - $descr =~ s/\s*Series//i; - $descr =~ s/\((.*?(PostScript|PS.*).*?)\)/$1/i; - if ($descr =~ - /^\s*(Generic\s*PostScript\s*Printer)\s*,?\s*(.*)$/i || - $descr =~ - /^\s*(PostScript\s*Printer)\s*,?\s*(.*)$/i || - $descr =~ /^([^,]+[^,\s])\s*,?\s*(Foomatic.*)$/i || - $descr =~ /^([^,]+[^,\s])\s*,?\s*(GhostScript.*)$/i || - $descr =~ /^([^,]+[^,\s])\s*,?\s*(CUPS.*)$/i || - $descr =~ /^([^,]+[^,\s])\s*,?\s+(PS.*)$/i || - $descr =~ - /^([^,]+[^,\s])\s*,?\s*(\(v?\.?\s*\d\d\d\d\.\d\d\d\).*)$/i || - $descr =~ /^([^,]+[^,\s])\s*,?\s*(v\d+\.\d+.*)$/i || - $descr =~ /^([^,]+[^,\s])\s*,?\s*(PostScript.*)$/i || - $descr =~ /^([^,]+)\s*,?\s*(.+)$/) { - $model = $1; - $driver = $2; - $model =~ s/[\-\s,]+$//; - $driver =~ s/\b(PS|PostScript\b)/PostScript/gi; - $driver =~ s/(PostScript)(.*)(PostScript)/$1$2/i; - $driver =~ - s/^\s*(\(?v?\.?\s*\d\d\d\d\.\d\d\d\)?|v\d+\.\d+)([,\s]*)(.*?)\s*$/$3$2$1/i; - $driver =~ s/,\s*\(/ (/g; - $driver =~ s/[\-\s,]+$//; - $driver =~ s/^[\-\s,]+//; - $driver =~ s/\s+/ /g; - if ($driver !~ /[a-z]/i) { - $driver = "PostScript " . $driver; - $driver =~ s/ $//; - } - } else { - # Some PPDs do not have the ", <driver>" part. - $model = $descr; - $driver = "PostScript"; - } - } - # Remove manufacturer's name from the beginning of the model - # name (do not do this with manufacturer names which contain - # odd characters) - $model =~ s/^$mf[\s\-]+//i - if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!; - # Clean some manufacturer's names - $mf = clean_manufacturer_name($mf); - # Rename Canon "BJC XXXX" models into "BJC-XXXX" so that the - # models do not appear twice - if ($mf eq "CANON") { - $model =~ s/BJC\s+/BJC-/; - } - # New MF devices from Epson have mis-spelled name in PPD files for - # native CUPS drivers of GIMP-Print - if ($mf eq "EPSON") { - $model =~ s/Stylus CX\-/Stylus CX/; - } - # Remove the "Oki" from the beginning of the model names of Okidata - # printers - if ($mf eq "OKIDATA") { - $model =~ s/Oki\s+//i; - } - # Try again to remove manufacturer's name from the beginning of the - # model name, this with the cleaned manufacturer name - $model =~ s/^$mf[\s\-]+//i - if $mf && $mf !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!; - # Put out the resulting description string - uc($mf) . '|' . $model . '|' . $driver . - ($lang && " (" . lang::locale_to_main_locale($lang) . ")"); -} - -sub get_descr_from_ppd { - my ($printer) = @_; - #- if there is no ppd, this means this is a raw queue. - if (! -r "$::prefix/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd") { - return "|" . N("Unknown model"); - } - return get_descr_from_ppdfile($printer, "/etc/cups/ppd/$printer->{OLD_QUEUE}.ppd"); -} - -sub get_descr_from_ppdfile { - my ($printer, $ppdfile) = @_; - my %ppd; - - # Remove ".gz" from end of file name, so that "catMaybeCompressed" works - $ppdfile =~ s/\.gz$//; - - eval { - local $_; - foreach (catMaybeCompressed("$::prefix$ppdfile")) { - # "OTHERS|Generic PostScript printer|PostScript (en)"; - /^\*([^\s:]*)\s*:\s*\"([^\"]*)\"/ and - do { $ppd{$1} = $2; next }; - /^\*([^\s:]*)\s*:\s*([^\s\"]*)/ and - do { $ppd{$1} = $2; next }; - } - }; - my $descr = ($ppd{NickName} || $ppd{ShortNickName} || $ppd{ModelName}); - my $make = $ppd{Manufacturer}; - my $lang = $ppd{LanguageVersion}; - my $entry = ppd_entry_str($make, $descr, $lang); - if (!$printer->{expert}) { - # Remove driver from printer list entry when in recommended mode - $entry =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/; - } - return $entry; -} - -sub ppd_devid_data { - my ($ppd) = @_; - $ppd = "$::prefix/usr/share/cups/model/$ppd"; - my @content; - if ($ppd =~ /\.gz$/i) { - @content = cat_("$::prefix/bin/zcat $ppd |") or return ("", ""); - } else { - @content = cat_($ppd) or return ("", ""); - } - my ($devidmake, $devidmodel); - /^\*Manufacturer:\s*\"(.*)\"\s*$/ and $devidmake = $1 - foreach @content; - /^\*Product:\s*\"\(?(.*?)\)?\"\s*$/ and $devidmodel = $1 - foreach @content; - return ($devidmake, $devidmodel); -} - -sub poll_ppd_base() { - my ($printer) = @_; - #- Before trying to poll the ppd database available to cups, we have - #- to make sure the file /etc/cups/ppds.dat is no more modified. - #- If cups continue to modify it (because it reads the ppd files - #- available), the poll_ppd_base program simply cores :-) - # else cups will not be happy! and ifup lo don't run ? - run_program::rooted($::prefix, 'ifconfig', 'lo', '127.0.0.1'); - printer::services::start_not_running_service("cups"); - my $driversthere = scalar(keys %thedb); - foreach (1..60) { - local *PPDS; open PPDS, ($::testing ? $::prefix : - "chroot $::prefix/ ") . - "/usr/bin/poll_ppd_base -a |"; - local $_; - while (<PPDS>) { - chomp; - my ($ppd, $mf, $descr, $lang) = split /\|/; - if ($ppd eq "raw") { next } - $ppd && $mf && $descr and do { - my $key = ppd_entry_str($mf, $descr, $lang); - my ($model, $driver) = ($1, $2) if $key =~ /^[^\|]+\|([^\|]+)\|(.*)$/; - # Clean some manufacturer's names - $mf = clean_manufacturer_name($mf); - # Remove language tag - $driver =~ s/\s*\([a-z]{2}(|_[A-Z]{2})\)\s*$//; - # Recommended Foomatic PPD? Extract "(recommended)" - my $isrecommended = - $driver =~ s/\s+\(recommended\)\s*$//i; - # Remove trailing white space - $driver =~ s/\s+$//; - # For Foomatic: Driver with "GhostScript + " - my $fullfoomaticdriver = $driver; - # Foomatic PPD? Extract driver name - my $isfoomatic = - $driver =~ s/^\s*(GhostScript|Foomatic)\s*\+\s*//i; - # Foomatic PostScript driver? - $isfoomatic ||= $descr =~ /Foomatic/i; - # Native CUPS? - my $isnativecups = $driver =~ /CUPS/i; - # Native PostScript - my $isnativeps = (!$isfoomatic and !$isnativecups); - # Key without language tag (key as it was produced for the - # entries from the Foomatic XML database) - my $keynolang = $key; - $keynolang =~ s/\s*\([a-z]{2}(|_[A-Z]{2})\)\s*$//; - if (!$isfoomatic) { - # Driver is PPD when the PPD is a non-Foomatic one - $driver = "PPD"; - } else { - # Remove language tag in menu entry when PPD is from - # Foomatic - $key = $keynolang; - } - if (!$printer->{expert}) { - # Remove driver from printer list entry when in - # recommended mode - $key =~ s/^([^\|]+\|[^\|]+)\|.*$/$1/; - # Only replace an existing printer entry if - # - its driver is not the same as the driver of the - # new one - # AND if one of the following items is true - # - The existing entry uses a "Foomatic + Postscript" - # driver and the new one is native PostScript - # - The existing entry is a Foomatic entry and the new - # one is "recommended" - # - The existing entry is a native PostScript entry - # and the new entry is a "recommended" driver other - # then "Foomatic + Postscript" - if (defined($thedb{$key})) { - next if lc($thedb{$key}{driver}) eq - lc($driver); - next unless $isnativeps && - $thedb{$key}{driver} =~ /^PostScript$/i || - $thedb{$key}{driver} ne "PPD" && $isrecommended || - $thedb{$key}{driver} eq "PPD" && $isrecommended && $driver ne "PostScript"; - - # Remove the old entry - delete $thedb{$key}; - } - } elsif ((defined - $thedb{"$mf|$model|$fullfoomaticdriver"} || - defined - $thedb{"$mf|$model|$fullfoomaticdriver (recommended)"}) && - $isfoomatic) { - # Expert mode: There is already an entry for the - # same printer/driver combo produced by the - # Foomatic XML database, so do not make a second - # entry - next; - } elsif (defined - $thedb{"$mf|$model|PostScript (recommended)"} && - $isnativeps) { - # Expert mode: "Foomatic + Postscript" driver is - # recommended and this is a PostScript PPD? Make - # this PPD the recommended one - foreach (keys - %{$thedb{"$mf|$model|PostScript (recommended)"}}) { - $thedb{"$mf|$model|PostScript"}{$_} = - $thedb{"$mf|$model|PostScript (recommended)"}{$_}; - } - delete - $thedb{"$mf|$model|PostScript (recommended)"}; - if (!$isrecommended) { - $key .= " (recommended)"; - } - } elsif ($driver =~ /PostScript/i && - $isrecommended && $isfoomatic && - (my @foundkeys = grep { - /^$mf\|$model\|/ && !/CUPS/i && - $thedb{$_}{driver} eq "PPD" - } keys %thedb)) { - # Expert mode: "Foomatic + Postscript" driver is - # recommended and there was a PostScript PPD? Make - # the PostScript PPD the recommended one - my $firstfound = $foundkeys[0]; - if (!(any { /\(recommended\)/ } @foundkeys)) { - # Do it only if none of the native PostScript - # PPDs for this printer is already "recommended" - foreach (keys %{$thedb{$firstfound}}) { - $thedb{"$firstfound (recommended)"}{$_} = - $thedb{$firstfound}{$_}; - } - delete $thedb{$firstfound}; - } - $key =~ s/\s*\(recommended\)//; - } elsif ($driver !~ /PostScript/i && - $isrecommended && $isfoomatic && - (@foundkeys = grep { - /^$mf\|$model\|.*\(recommended\)/ && - !/CUPS/i && $thedb{$_}{driver} eq "PPD" - } keys %thedb)) { - # Expert mode: Foomatic driver other than "Foomatic + - # Postscript" is recommended and there was a PostScript - # PPD which was recommended? Make The Foomatic driver - # the recommended one - foreach my $sourcekey (@foundkeys) { - # Remove the "recommended" tag - my $destkey = $sourcekey; - $destkey =~ s/\s+\(recommended\)\s*$//i; - foreach (keys %{$thedb{$sourcekey}}) { - $thedb{$destkey}{$_} = $thedb{$sourcekey}{$_}; - } - delete $thedb{$sourcekey}; - } - } - $thedb{$key}{ppd} = $ppd; - $thedb{$key}{make} = $mf; - $thedb{$key}{model} = $model; - $thedb{$key}{driver} = $driver; - # Get auto-detection data - #my ($devidmake, $devidmodel) = ppd_devid_data($ppd); - #$thedb{$key}{devidmake} = $devidmake; - #$thedb{$key}{devidmodel} = $devidmodel; - } - } - close PPDS; - scalar(keys %thedb) - $driversthere > 5 and last; - #- we have to try again running the program, wait here a little - #- before. - sleep 1; - } - #scalar(keys %descr_to_ppd) > 5 or - # die "unable to connect to cups server"; - -} - - - -#-****************************************************************************** -#- write functions -#-****************************************************************************** - -sub configure_queue($) { - my ($printer) = @_; - - #- Create the queue with "foomatic-configure", in case of queue - #- renaming copy the old queue - my $quotedconnect = $printer->{currentqueue}{connect}; - $quotedconnect =~ s/\$/\\\$/g; # Quote '$' in URI - run_program::rooted($::prefix, "foomatic-configure", "-q", - "-s", $printer->{currentqueue}{spooler}, - "-n", $printer->{currentqueue}{queue}, - ($printer->{currentqueue}{queue} ne - $printer->{OLD_QUEUE} && - $printer->{configured}{$printer->{OLD_QUEUE}} ? - ("-C", $printer->{OLD_QUEUE}) : ()), - "-c", $quotedconnect, - ($printer->{currentqueue}{foomatic} ? - ("-p", $printer->{currentqueue}{printer}, - "-d", $printer->{currentqueue}{driver}) : - ($printer->{currentqueue}{ppd} ? - ("--ppd", - ($printer->{currentqueue}{ppd} !~ m!^/! ? - "/usr/share/cups/model/" : "") . - $printer->{currentqueue}{ppd}) : - ("-d", "raw"))), - "-N", $printer->{currentqueue}{desc}, - "-L", $printer->{currentqueue}{loc}, - @{$printer->{currentqueue}{options}} - ) or return 0;; - if ($printer->{currentqueue}{ppd}) { - # Add a comment line containing the path of the used PPD file to the - # end of the PPD file - if ($printer->{currentqueue}{ppd} ne '1') { - append_to_file("$::prefix/etc/cups/ppd/$printer->{currentqueue}{queue}.ppd", "*%MDKMODELCHOICE:$printer->{currentqueue}{ppd}\n"); - } - } - - # Make sure that queue is active - if ($printer->{SPOOLER} ne "pdq") { - run_program::rooted($::prefix, "foomatic-printjob", - "-s", $printer->{currentqueue}{spooler}, - "-C", "up", $printer->{currentqueue}{queue}); - } - - # In case of CUPS set some more useful defaults for text and image - # printing - if ($printer->{SPOOLER} eq "cups") { - set_cups_special_options($printer->{currentqueue}{queue}); - } - - # Check whether a USB printer is configured and activate USB printing if so - my $useUSB = 0; - foreach (values %{$printer->{configured}}) { - $useUSB ||= $_->{queuedata}{connect} =~ /usb/i || - $_->{DeviceURI} =~ /usb/i; - } - $useUSB ||= $printer->{currentqueue}{connect} =~ /usb/i; - if ($useUSB) { - my $f = "$::prefix/etc/sysconfig/usb"; - my %usb = getVarsFromSh($f); - $usb{PRINTER} = "yes"; - setVarsInSh($f, \%usb); - } - - # Open permissions for device file when PDQ is chosen as spooler - # so normal users can print. - if ($printer->{SPOOLER} eq 'pdq') { - if ($printer->{currentqueue}{connect} =~ - m!^\s*(file|parallel|usb|serial):(\S*)\s*$!) { - set_permissions($1, "666"); - } - } - - # Make a new printer entry in the $printer structure - $printer->{configured}{$printer->{currentqueue}{queue}}{queuedata} = - {}; - copy_printer_params($printer->{currentqueue}, - $printer->{configured}{$printer->{currentqueue}{queue}}{queuedata}); - # Construct an entry line for tree view in main window of - # printerdrake - make_menuentry($printer, $printer->{currentqueue}{queue}); - - # Store the default option settings - $printer->{configured}{$printer->{currentqueue}{queue}}{args} = {}; - $printer->{configured}{$printer->{currentqueue}{queue}}{args} = - $printer->{ARGS}; - # Clean up - delete($printer->{ARGS}); - $printer->{OLD_CHOICE} = ""; - $printer->{ARGS} = {}; - $printer->{DBENTRY} = ""; - $printer->{currentqueue} = {}; - - return 1; -} - -sub remove_queue($$) { - my ($printer) = $_[0]; - my ($queue) = $_[1]; - run_program::rooted($::prefix, "foomatic-configure", "-R", "-q", - "-s", $printer->{SPOOLER}, - "-n", $queue); - # Delete old stuff from data structure - delete $printer->{configured}{$queue}; - delete($printer->{currentqueue}); - delete($printer->{ARGS}); - $printer->{OLD_CHOICE} = ""; - $printer->{ARGS} = {}; - $printer->{DBENTRY} = ""; - $printer->{currentqueue} = {}; - removeprinterfromapplications($printer, $queue); -} - -sub restart_queue($) { - my ($printer) = @_; - my $queue = $printer->{QUEUE}; - - # Restart the daemon(s) - for ($printer->{SPOOLER}) { - /cups/ and do { - #- restart cups. - printer::services::restart("cups"); - last }; - /lpr|lprng/ and do { - #- restart lpd. - foreach ("/var/spool/lpd/$queue/lock", "/var/spool/lpd/lpd.lock") { - my $pidlpd = (cat_("$::prefix$_"))[0]; - kill 'TERM', $pidlpd if $pidlpd; - unlink "$::prefix$_"; - } - printer::services::restart("lpd"); sleep 1; - last }; - } - # Kill the jobs - run_program::rooted($::prefix, "foomatic-printjob", "-R", - "-s", $printer->{SPOOLER}, - "-P", $queue, "-"); - -} - -sub print_pages($@) { - my ($printer, @pages) = @_; - my $queue = $printer->{QUEUE}; - my $lpr = "/usr/bin/foomatic-printjob"; - my $lpq = "$lpr -Q"; - - # Print the pages - foreach (@pages) { - my $page = $_; - # Only text and PostScript can be printed directly with all spoolers, - # images must be treated seperately - if ($page =~ /\.jpg$/) { - if ($printer->{SPOOLER} ne "cups") { - # Use "convert" from ImageMagick for non-CUPS spoolers - system(($::testing ? $::prefix : "chroot $::prefix/ ") . - "/usr/bin/convert $page -page 427x654+100+65 PS:- | " . - ($::testing ? $::prefix : "chroot $::prefix/ ") . - "$lpr -s $printer->{SPOOLER} -P $queue"); - } else { - # Use CUPS's internal image converter with CUPS, tell it - # to let the image occupy 90% of the page size (so nothing - # gets cut off by unprintable borders) - run_program::rooted($::prefix, $lpr, "-s", $printer->{SPOOLER}, - "-P", $queue, "-o", "scaling=90", $page); - } - } else { - run_program::rooted($::prefix, $lpr, "-s", $printer->{SPOOLER}, - "-P", $queue, $page); - } - } - sleep 5; #- allow lpr to send pages. - # Check whether the job is queued - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "$lpq -s $printer->{SPOOLER} -P $queue |"; - my @lpq_output = - grep { !/^no entries/ && !(/^Rank\s+Owner/ .. /^\s*$/) } <F>; - close F; - @lpq_output; -} - -sub help_output { - my ($printer, $spooler) = @_; - my $queue = $printer->{QUEUE}; - - local *F; - open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . sprintf($spoolers{$spooler}{help}, $queue); - my $helptext = join("", <F>); - close F; - $helptext ||= "Option list not available!\n"; - return $helptext; -} - -sub print_optionlist { - my ($printer) = @_; - my $queue = $printer->{QUEUE}; - my $lpr = "/usr/bin/foomatic-printjob"; - - # Print the option list pages - if ($printer->{configured}{$queue}{queuedata}{foomatic}) { - run_program::rooted($::prefix, $lpr, "-s", $printer->{SPOOLER}, - "-P", $queue, "-o", "docs", - "/etc/bashrc"); - } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) { - system(($::testing ? $::prefix : "chroot $::prefix/ ") . - "/usr/bin/lphelp $queue | " . - ($::testing ? $::prefix : "chroot $::prefix/ ") . - "$lpr -s $printer->{SPOOLER} -P $queue"); - } -} - -# --------------------------------------------------------------- -# -# Spooler config stuff -# -# --------------------------------------------------------------- - -sub get_copiable_queues { - my ($oldspooler, $newspooler) = @_; - - my @queuelist; #- here we will list all Foomatic-generated queues - # Get queue list with foomatic-configure - local *QUEUEOUTPUT; - open QUEUEOUTPUT, ($::testing ? $::prefix : "chroot $::prefix/ ") . - "foomatic-configure -Q -q -s $oldspooler |" or - die "Could not run foomatic-configure"; - - my $entry = {}; - my $inentry = 0; - local $_; - while (<QUEUEOUTPUT>) { - chomp; - if ($inentry) { - # We are inside a queue entry - if (m!^\s*</queue>\s*$!) { - # entry completed - $inentry = 0; - if ($entry->{foomatic} && $entry->{spooler} eq $oldspooler) { - # Is the connection type supported by the new - # spooler? - if ($newspooler eq "cups" && $entry->{connect} =~ /^(file|ptal|lpd|socket|smb|ipp):/ || - $newspooler =~ /^(lpd|lprng)$/ && $entry->{connect} =~ /^(file|ptal|lpd|socket|smb|ncp|postpipe):/ || - $newspooler eq "pdq" && $entry->{connect} =~ /^(file|ptal|lpd|socket):/) { - push(@queuelist, $entry->{name}); - } - } - $entry = {}; - } elsif (m!^\s*<name>(.+)</name>\s*$!) { - # queue name - $entry->{name} = $1; - } elsif (m!^\s*<connect>(.+)</connect>\s*$!) { - # connection type (URI) - $entry->{connect} = $1; - } - } else { - if (m!^\s*<queue\s+foomatic\s*=\s*\"?(\d+)\"?\s*spooler\s*=\s*\"?(\w+)\"?\s*>\s*$!) { - # new entry - $inentry = 1; - $entry->{foomatic} = $1; - $entry->{spooler} = $2; - } - } - } - close QUEUEOUTPUT; - - return @queuelist; -} - -sub copy_foomatic_queue { - my ($printer, $oldqueue, $oldspooler, $newqueue) = @_; - run_program::rooted($::prefix, "foomatic-configure", "-q", - "-s", $printer->{SPOOLER}, - "-n", $newqueue, - "-C", $oldspooler, $oldqueue); - # In case of CUPS set some more useful defaults for text and image printing - if ($printer->{SPOOLER} eq "cups") { - set_cups_special_options($newqueue); - } -} - -# ------------------------------------------------------------------ -# -# Stuff for non-interactive printer configuration -# -# ------------------------------------------------------------------ - -# Check whether a given URI (for example of an existing queue matches -# one of the auto-detected printers - -sub autodetectionentry_for_uri { - my ($uri, @autodetected) = @_; - - if ($uri =~ m!^usb://([^/]+)/([^/\?]+)(|\?serial=(\S+))$!) { - # USB device with URI referring to printer model - my $make = $1; - my $model = $2; - my $serial = $4; - if ($make && $model) { - $make =~ s/\%20/ /g; - $model =~ s/\%20/ /g; - $serial =~ s/\%20/ /g; - $make =~ s/Hewlett[-\s_]Packard/HP/; - $make =~ s/HEWLETT[-\s_]PACKARD/HP/; - my $smake = handle_configs::searchstr($make); - my $smodel = handle_configs::searchstr($model); - foreach my $p (@autodetected) { - next if $p->{port} !~ /usb/i; - next if ((!$p->{val}{MANUFACTURER} || - $p->{val}{MANUFACTURER} ne $make) && - (!$p->{val}{DESCRIPTION} || - $p->{val}{DESCRIPTION} !~ /^\s*$smake\s+/)); - next if ((!$p->{val}{MODEL} || - $p->{val}{MODEL} ne $model) && - (!$p->{val}{DESCRIPTION} || - $p->{val}{DESCRIPTION} !~ /\s+$smodel\s*$/)); - next if ($serial && - (!$p->{val}{SERIALNUMBER} || - $p->{val}{SERIALNUMBER} ne $serial)); - return $p; - } - } - } elsif ($uri =~ m!^ptal://?mlc:!) { - # HP multi-function device (controlled by HPOJ) - my $ptaldevice = $uri; - $ptaldevice =~ s!^ptal://?mlc:!!; - if ($ptaldevice =~ /^par:(\d+)$/) { - my $device = "/dev/lp$1"; - foreach my $p (@autodetected) { - next if !$p->{port} || - $p->{port} ne $device; - return $p; - } - } else { - my $model = $2 if $ptaldevice =~ /^(usb|par):(.*)$/; - $model =~ s/_/ /g; - foreach my $p (@autodetected) { - next if !$p->{val}{MODEL} || - $p->{val}{MODEL} ne $model; - return $p; - } - } - } elsif ($uri =~ m!^(socket|smb|file|parallel|usb|serial):/!) { - # Local print-only device, Ethernet-(TCP/Socket)-connected printer, - # or printer on Windows server - my $device = $uri; - $device =~ s/^(file|parallel|usb|serial)://; - foreach my $p (@autodetected) { - next if !$p->{port} || - $p->{port} ne $device; - return $p; - } - } - return undef; -} - -# ------------------------------------------------------------------ -# -# Configuration of HP multi-function devices -# -# ------------------------------------------------------------------ - -sub configure_hpoj { - my ($device, @autodetected) = @_; - - # Make the subroutines of /usr/sbin/ptal-init available - # It's only necessary to read it at the first call of this subroutine, - # the subroutine definitions stay valid after leaving this subroutine. - if (!$ptalinitread) { - local *PTALINIT; - open PTALINIT, "$::prefix/usr/sbin/ptal-init" or do { - die "unable to open $::prefix/usr/sbin/ptal-init"; - }; - my @ptalinitfunctions; # subroutine definitions in /usr/sbin/ptal-init - local $_; - while (<PTALINIT>) { - if (m!sub main!) { - last; - } elsif ((m!^[^\#]!) && !(m!^\s*exec\b!)){ - # Comment lines and the "exec" line (probably obsolete - # Red Hat workaround) are skipped. - - # Make the subroutines also working during installation - if ($::isInstall) { - s!\$::prefix!\$hpoj_prefix!g; - s!prefix="/usr"!prefix="$::prefix/usr"!g; - s!etcPtal="/etc/ptal"!etcPtal="$::prefix/etc/ptal"!g; - s!varLock="/var/lock"!varLock="$::prefix/var/lock"!g; - s!varRunPrefix="/var/run"!varRunPrefix="$::prefix/var/run"!g; - s!/sbin/lsmod!/usr/bin/lsmod!g; - s!/sbin/modprobe!/usr/bin/modprobe!g; - s!/sbin/rmmod!/usr/bin/rmmod!g; - s!(my\s*\$osPlatform\s*=\s*).*?$!$1"Linux";!g; - s!chomp\s*\$osPlatform\s*;\s*$!!g; - s!(my\s*\$linuxVersion\s*=\s*).*?$!$1"$kernelversion";!g; - s!^\s*\$linuxVersion\s*=~\s*s.*$!!g; - s!chomp\s*\$linuxVersion\s*;\s*$!!g; - s!(my\s*\$usbprintermodule\s*=\s*).*?$!$1"$usbprintermodule";!g; - } - push @ptalinitfunctions, $_; - } - } - close PTALINIT; - - eval "package printer::hpoj; - @ptalinitfunctions - sub getDevnames { - return (%devnames) - } - sub getConfigInfo { - return (%configInfo) - }"; - - if ($::isInstall) { - # Needed for photo card reader detection during installation - system("ln -s $::prefix/var/run/ptal-mlcd /var/run/ptal-mlcd"); - system("ln -s $::prefix/etc/ptal /etc/ptal"); - } - $ptalinitread = 1; - } - - # Read the HPOJ config file and check whether this device is already - # configured - printer::hpoj::setupVariables(); - printer::hpoj::readDeviceInfo(); - - $device =~ m!^/dev/\S*lp(\d+)$! or - $device =~ m!^/dev/printers/(\d+)$! or - $device =~ m!^socket://([^:]+)$! or - $device =~ m!^socket://([^:]+):(\d+)$!; - my $model = $1; - my ($model_long, $serialnumber, $serialnumber_long) = ("", "", ""); - my $cardreader = 0; - my $device_ok = 1; - my $bus; - my $address_arg = ""; - my $base_address = ""; - my $hostname = ""; - my $port = $2; - if ($device =~ /usb/) { - $bus = "usb"; - } elsif ($device =~ /par/ || - $device =~ m!/dev/lp! || - $device =~ /printers/) { - $bus = "par"; - $address_arg = printer::detect::parport_addr($device); - eval "$base_address = $1" if $address_arg =~ /^\s*-base\s+(\S+)/; - } elsif ($device =~ /socket/) { - $bus = "hpjd"; - $hostname = $model; - return "" if $port && ($port < 9100 || $port > 9103); - if ($port && $port != 9100) { - $port -= 9100; - $hostname .= ":$port"; - } - } else { - return ""; - } - if ($#autodetected < 0) { - # Make a pseudo structure for the auto-detected data if there is - # no auto-detected data (for example when configuring manually) - $autodetected[0] = { - 'port' => $device, - 'val' => { - 'MODEL' => N("Unknown model") - } - }; - } - my $devdata; - foreach (@autodetected) { - $device eq $_->{port} or next; - $devdata = $_; - # $model is for the PTAL device name, so make sure that it is unique - # so in the case of the model name auto-detection having failed leave - # the port number or the host name as model name. - my $searchunknown = N("Unknown model"); - if ($_->{val}{MODEL} && - $_->{val}{MODEL} !~ /$searchunknown/i && - $_->{val}{MODEL} !~ /^\s*$/) { - $model = $_->{val}{MODEL}; - } - $serialnumber = $_->{val}{SERIALNUMBER}; - services::stop("hpoj") if ($bus ne "hpjd"); - # Check if the device is really an HP multi-function device - #my $libusb = 0; - foreach my $libusb (0, 1) { - # Do access via libusb/user mode only if we have a USB device - next if ($libusb && ($bus ne "usb")); - # Preliminary workaround to make the user-mode USB devices - # (LIDIL devices) installable as verification of the HPOJ - # settings of these devices does not work yet. The workaround - # will probably removed after version 9.2 of this distribution. - # Note: This workaround leaves out the checking for a photo - # memory card reader, but to my knowledge there are no LIDIL - # devices with card reader yet. - if ($libusb) { - $device_ok = 1; - next; - } - my $printermoduleunloaded = 0; - if ($bus ne "hpjd") { - if (!$libusb) { - # Start ptal-mlcd daemon for locally connected devices - # (kernel mode with "printer"/"usblp" module for USB). - run_program::rooted($::prefix, - "ptal-mlcd", "$bus:probe", - "-device", - $device, split(' ',$address_arg)); - } else { - # Start ptal-mlcd daemon for user-mode USB devices - # (all LIDIL MF devices as HP PSC 1xxx and OfficeJet - # 4xxx) - my $usbdev = usbdevice($_->{val}); - if (defined($usbdev)) { - # Unload kernel module "printer"/"usblp" - if (modules::get_probeall("usb-interface")) { - eval(modules::unload($usbprintermodule)); - $printermoduleunloaded = 1; - } - # Start ptal-mlcd - run_program::rooted($::prefix, - "ptal-mlcd", "$bus:probe", - "-device", $usbdev); - } else { - # We could not determine the USB device number, - # so we cannot check this device in user mode - next; - } - } - } - $device_ok = 0; - my $ptalprobedevice = $bus eq "hpjd" ? "hpjd:$hostname" : "mlc:$bus:probe"; - local *F; - if (open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice |") { - my $devid = join("", <F>); - close F; - if ($devid) { - $device_ok = 1; - local *F; - if (open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice -long -mdl 2>/dev/null |") { - $model_long = join("", <F>); - close F; - chomp $model_long; - # If SNMP or local port auto-detection failed but - # HPOJ auto-detection succeeded, fill in model name - # here. - if (!$_->{val}{MODEL} || - $_->{val}{MODEL} =~ /$searchunknown/i || - $_->{val}{MODEL} =~ /^\s*$/) { - if ($model_long =~ /:([^:;]+);/) { - $_->{val}{MODEL} = $1; - $model = $_->{val}{MODEL}; - $model =~ s/ /_/g; - } - } - } - if (open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . "/usr/bin/ptal-devid $ptalprobedevice -long -sern 2>/dev/null |") { #-# - $serialnumber_long = join("", <F>); - close F; - chomp $serialnumber_long; - } - $cardreader = 1 if printer::hpoj::cardReaderDetected($ptalprobedevice); - } - } - if ($bus ne "hpjd") { - # Stop ptal-mlcd daemon for locally connected devices - local *F; - if (open F, ($::testing ? $::prefix : "chroot $::prefix/ ") . qq(ps auxwww | grep "ptal-mlcd $bus:probe" | grep -v grep | )) { - my $line = <F>; - if ($line =~ /^\s*\S+\s+(\d+)\s+/) { - my $pid = $1; - kill 15, $pid; - } - close F; - } - $printermoduleunloaded && - eval(modules::load($usbprintermodule)); - } - last if $device_ok; - } - printer::services::start("hpoj") if ($bus ne "hpjd"); - last; - } - # No, it is not an HP multi-function device. - return "" if !$device_ok; - - # If $model_long and $serialnumber_long stay empty, fill them with - # $model and $serialnumber - $model_long ||= $model; - $serialnumber_long ||= $serialnumber; - - # Determine the ptal device name from already existing config files - my $ptalprefix = - ($bus eq "hpjd" ? "hpjd:" : "mlc:$bus:"); - my $ptaldevice = printer::hpoj::lookupDevname($ptalprefix, $model_long, - $serialnumber_long, $base_address); - - # It's all done for us, the device is already configured - return $ptaldevice if defined($ptaldevice); - - # Determine the ptal name for a new device - if ($bus eq "hpjd") { - $ptaldevice = "hpjd:$hostname"; - } else { - $ptaldevice = $model; - $ptaldevice =~ s![\s/]+!_!g; - $ptaldevice = "mlc:$bus:$ptaldevice"; - } - - # Delete any old/conflicting devices - printer::hpoj::deleteDevice($ptaldevice); - if ($bus eq "par") { - while (1) { - my $oldDevname = printer::hpoj::lookupDevname("mlc:par:",undef,undef,$base_address); - last unless defined($oldDevname); - printer::hpoj::deleteDevice($oldDevname); - } - } - - # Configure the device - - # Open configuration file - local *CONFIG; - open(CONFIG, "> $::prefix/etc/ptal/$ptaldevice") or - die "Could not open /etc/ptal/$ptaldevice for writing!\n"; - - # Write file header. - my $date = chomp_(`date`); - print CONFIG -qq( -# Added $date by "printerdrake" - -# The basic format for this file is "key[+]=value". -# If you say "+=" instead of "=", then the value is appended to any -# value already defined for this key, rather than replacing it. - -# Comments must start at the beginning of the line. Otherwise, they may -# be interpreted as being part of the value. - -# If you have multiple devices and want to define options that apply to -# all of them, then put them in the file /etc/ptal/defaults, which is read -# in before this file. - -# The format version of this file: -# ptal-init ignores devices with incorrect/missing versions. -init.version=2 -); - - # Write model string. - if ($model_long !~ /\S/) { - print CONFIG - "\n" . - qq(# "printerdrake" couldn't read the model but added this device anyway:\n) . - "# "; - } else { - print CONFIG - "\n" . - "# The device model that was originally detected on this port:\n" . - qq(# If this ever changes, then you should re-run "printerdrake"\n) . - "# to delete and re-configure this device.\n"; - if ($bus eq "par") { - print CONFIG - "# Comment out if you don't care what model is really connected to this\n" . - "# parallel port.\n"; - } - } - print CONFIG - qq(init.mlcd.append+=-devidmatch "$model_long"\n); - - # Write serial-number string. - if ($serialnumber_long !~ /\S/) { - print CONFIG - "\n" . - "# The device's serial number is unknown.\n" . - "# "; - } else { - print CONFIG - "\n" . - "# The serial number of the device that was originally detected on this port:\n"; - if ($bus =~ /^[pu]/) { - print CONFIG - "# Comment out if you want to disable serial-number matching.\n"; - } - } - print CONFIG - qq(init.mlcd.append+=-devidmatch "$serialnumber_long"\n); - - if ($bus =~ /^[pu]/) { - print CONFIG - "\n" . - "# Standard options passed to ptal-mlcd:\n" . - "init.mlcd.append+="; - if ($bus eq "usb") { - # Important: don't put more quotes around /dev/usb/lp[0-9]*, - # because ptal-mlcd currently does no globbing: - print CONFIG "-device /dev/usb/lp0 /dev/usb/lp1 /dev/usb/lp2 /dev/usb/lp3 /dev/usb/lp4 /dev/usb/lp5 /dev/usb/lp6 /dev/usb/lp7 /dev/usb/lp8 /dev/usb/lp9 /dev/usb/lp10 /dev/usb/lp11 /dev/usb/lp12 /dev/usb/lp13 /dev/usb/lp14 /dev/usb/lp15"; - } elsif ($bus eq "par") { - print CONFIG "$address_arg -device $device"; - } - print CONFIG "\n" . - "\n" . - "# ptal-mlcd's remote console can be useful for debugging, but may be a\n" . - "# security/DoS risk otherwise. In any case, it's accessible with the\n" . - qq(# command "ptal-connect mlc:<XXX>:<YYY> -service PTAL-MLCD-CONSOLE".\n) . - "# Uncomment the following line if you want to enable this feature for\n" . - "# this device:\n" . - "# init.mlcd.append+=-remconsole\n" . - "\n" . - "# If you need to pass any other command-line options to ptal-mlcd, then\n" . - "# add them to the following line and uncomment the line:\n" . - "# init.mlcd.append+=\n" . - "\n" . - "# By default ptal-printd is started for mlc: devices. If you use CUPS,\n" . - "# then you may not be able to use ptal-printd, and you can uncomment the\n" . - "# following line to disable ptal-printd for this device:\n" . - "# init.printd.start=0\n"; - } else { - print CONFIG - "\n" . - "# By default ptal-printd isn't started for hpjd: devices.\n" . - "# If for some reason you want to start it for this device, then\n" . - "# uncomment the following line:\n" . - "init.printd.start=1\n"; - } - - print CONFIG - "\n" . - "# If you need to pass any additional command-line options to ptal-printd,\n" . - "# then add them to the following line and uncomment the line:\n" . - "# init.printd.append+=\n"; - if ($cardreader) { - print CONFIG - "\n" . - "# Uncomment the following line to enable ptal-photod for this device:\n" . - "init.photod.start=1\n" . - "\n" . - "# If you have more than one photo-card-capable peripheral and you want to\n" . - "# assign particular TCP port numbers and mtools drive letters to each one,\n" . - qq(# then change the line below to use the "-portoffset <n>" option.\n) . - "init.photod.append+=-maxaltports 26\n"; - } - close(CONFIG); - printer::hpoj::readOneDevice($ptaldevice); - - # Restart HPOJ - printer::services::restart("hpoj"); - - # Return HPOJ device name to form the URI - return $ptaldevice; -} - -sub devicefound { - my ($usbid, $model, $serial) = @_; - # Compare the output of "lsusb -vv" with the elements of the device - # ID string - if ($serial && ($usbid->{'SERIALNUMBER'} eq $serial)) { - # Match of serial number has absolute priority - return 1; - } elsif ($model && ($usbid->{'MODEL'} eq $model)) { - # Try to match the model name otherwise - return 1; - } - return 0; -} - -sub usbdevice() { - my ($usbid) = @_; - # Run "lsusb -vv¨ and search the given device to get its USB bus and - # device numbers - local *F; - open F, ($::testing ? "" : "chroot $::prefix/ ") . - '/bin/sh -c "export LC_ALL=C; lsusb -vv 2> /dev/null" |' - or return undef; - my ($bus, $device, $model, $serial) = ("", "", "", ""); - my $found = 0; - while (my $line = <F>) { - chomp $line; - if ($line =~ m/^\s*Bus\s+(\d+)\s+Device\s+(\d+)\s*:/i) { - # head line of a new device - my ($newbus, $newdevice) = ($1, $2); - last if (($model || $serial) && - ($found = devicefound($usbid, $model, $serial))); - ($bus, $device) = ($newbus, $newdevice); - } elsif ($line =~ m/^\s*iProduct\s+\d+\s+(.+)$/i) { - # model line - next if $device eq ""; - $model = $1; - } elsif ($line =~ m/^\s*iSerial\s+\d+\s+(.+)$/i) { - # model line - next if $device eq ""; - $serial = $1; - } - } - close F; - # Check last entry - $found = devicefound($usbid, $model, $serial); - - return 0 if !$found; - return sprintf("%%%03d%%%03d", $bus, $device); -} - -sub config_sane() { - # Add HPOJ backend to /etc/sane.d/dll.conf if needed (no individual - # config file /etc/sane.d/hpoj.conf necessary, the HPOJ driver finds the - # scanner automatically) - return if member("hpoj", chomp_(cat_("$::prefix/etc/sane.d/dll.conf"))); - eval { append_to_file("$::prefix/etc/sane.d/dll.conf", "hpoj\n") } or - die "can't write SANE config in /etc/sane.d/dll.conf: $!"; -} - -sub config_photocard() { - - # Add definitions for the drives p:. q:, r:, and s: to /etc/mtools.conf - cat_("$::prefix/etc/mtools.conf") !~ m/^\s*drive\s+p:/m or return; - - append_to_file("$::prefix/etc/mtools.conf", <<'EOF'); -# Drive definitions added for the photo card readers in HP multi-function -# devices driven by HPOJ -drive p: file=":0" remote -drive q: file=":1" remote -drive r: file=":2" remote -drive s: file=":3" remote -# This turns off some file system integrity checks of mtools, it is needed -# for some photo cards. -mtools_skip_check=1 -EOF - - # Generate a config file for the graphical mtools frontend MToolsFM or - # modify the existing one - my $mtoolsfmconf; - if (-f "$::prefix/etc/mtoolsfm.conf") { - $mtoolsfmconf = cat_("$::prefix/etc/mtoolsfm.conf") or die "can't read MToolsFM config in $::prefix/etc/mtoolsfm.conf: $!"; - my $alloweddrives = lc($1) if $mtoolsfmconf =~ m/^\s*DRIVES\s*=\s*\"([A-Za-z ]*)\"/m; - foreach my $letter ("p", "q", "r", "s") { - $alloweddrives .= $letter if $alloweddrives !~ /$letter/; - } - $mtoolsfmconf =~ s/^\s*DRIVES\s*=\s*"[A-Za-z ]*"/DRIVES="$alloweddrives"/m; - $mtoolsfmconf =~ s/^\s*LEFTDRIVE\s*=\s*"[^"]*"/LEFTDRIVE="p"/m; - #"# Fix emacs syntax highlighting - } else { - $mtoolsfmconf = <<'EOF'; -# MToolsFM config file. comments start with a hash sign. -# -# This variable sets the allowed driveletters (all lowercase). Example: -# DRIVES="ab" -DRIVES="apqrs" -# -# This variable sets the driveletter upon startup in the left window. -# An empty string or space is for the hardisk. Example: -# LEFTDRIVE="a" -LEFTDRIVE="p" -# -# This variable sets the driveletter upon startup in the right window. -# An empty string or space is for the hardisk. Example: -# RIGHTDRIVE="a" -RIGHTDRIVE=" " -EOF - } - output("$::prefix/etc/mtoolsfm.conf", $mtoolsfmconf); -} - -# ------------------------------------------------------------------ -# -# Configuration of printers in applications -# -# ------------------------------------------------------------------ - -sub configureapplications { - my ($printer) = @_; - setcupslink($printer); - printer::office::configureoffice('Star Office', $printer); - printer::office::configureoffice('OpenOffice.Org', $printer); - printer::gimp::configure($printer); -} - -sub addcupsremotetoapplications { - my ($printer, $queue) = @_; - setcupslink($printer); - return printer::office::add_cups_remote_to_office('Star Office', $printer, $queue) && - printer::office::add_cups_remote_to_office('OpenOffice.Org', $printer, $queue) && - printer::gimp::addcupsremoteto($printer, $queue); -} - -sub removeprinterfromapplications { - my ($printer, $queue) = @_; - setcupslink($printer); - return printer::office::remove_printer_from_office('Star Office', $printer, $queue) && - printer::office::remove_printer_from_office('OpenOffice.Org', $printer, $queue) && - printer::gimp::removeprinterfrom($printer, $queue); -} - -sub removelocalprintersfromapplications { - my ($printer) = @_; - setcupslink($printer); - printer::office::remove_local_printers_from_office('Star Office', $printer); - printer::office::remove_local_printers_from_office('OpenOffice.Org', $printer); - printer::gimp::removelocalprintersfrom($printer); -} - -sub setcupslink { - my ($printer) = @_; - return 1 if !$::isInstall || $printer->{SPOOLER} ne "cups" || -d "/etc/cups/ppd"; - system("ln -sf $::prefix/etc/cups /etc/cups"); - return 1; -} - - -1; diff --git a/perl-install/printer/office.pm b/perl-install/printer/office.pm deleted file mode 100644 index 4a6ae02b5..000000000 --- a/perl-install/printer/office.pm +++ /dev/null @@ -1,375 +0,0 @@ -package printer::office; - -use strict; -use common; -use run_program; -use printer::data; -use printer::common; -use printer::cups; - -# ------------------------------------------------------------------ -# Star Office/OpenOffice.org -# ------------------------------------------------------------------ - -# OpenOffice.org stuff applies only for Star Office 6.x now, as our -# OpenOffice.org is patched for native CUPS support - -our $suites = { - 'OpenOffice.Org' => { - 'make' => \&makeopenofficeprinterentry, - 'remove' => \&removeopenofficeprinterentry, - 'file_name' => '^(.*)/share/psprint/psprint.conf$', - 'param' => ["Generic Printer", "Command="], - 'perl' => '/usr/bin/perl -p -e "s=/euro /unused=/Euro /unused=" | /usr/bin/', - 'files' => ["/usr/lib/office6*/share/psprint/psprint.conf", - "/usr/local/lib/office6*/share/psprint/psprint.conf", - "/usr/local/office6*/share/psprint/psprint.conf", - "/opt/office6*/share/psprint/psprint.conf"], - }, - 'Star Office' => { - 'make' => \&makestarofficeprinterentry, - 'remove' => \&removestarofficeprinterentry, - 'file_name' => '^(.*)/share/xp3/Xpdefaults$', - 'param' => ["ports", "default_queue="], - 'perl' => '/usr/bin/perl -p -e "s=16#80 /euro=16#80 /Euro=" | /usr/bin/', - 'files' => ["/usr/lib/*/share/xp3/Xpdefaults", - "/usr/local/lib/*/share/xp3/Xpdefaults", - "/usr/local/*/share/xp3/Xpdefaults", - "/opt/*/share/xp3/Xpdefaults"], - } -}; - -sub configureoffice { - my ($suite, $printer) = @_; - # Do we have Star Office installed? - my $configfilename = find_config_file($suite); - return 1 unless $configfilename; - my $configprefix = $1 if $configfilename =~ m!$suites->{$suite}{file_name}!; - # Load Star Office printer config file - my $configfilecontent = cat_("$::prefix$configfilename"); - # Update remote CUPS queues - if (0 && $printer->{SPOOLER} eq "cups" && - (-x "$::prefix/usr/bin/curl" || -x "$::prefix/usr/bin/wget")) { - my @printerlist = printer::cups::get_remote_queues(); - foreach my $listentry (@printerlist) { - next unless $listentry =~ /^([^\|]+)\|([^\|]+)$/; - my $queue = $1; - my $server = $2; - if (-x "$::prefix/usr/bin/wget") { - eval(run_program::rooted( - $::prefix, "/usr/bin/wget", "-O", - "/etc/foomatic/$queue.ppd", - "http://$server:631/printers/$queue.ppd")); - } else { - eval(run_program::rooted( - $::prefix, "/usr/bin/curl", "-o", - "/etc/foomatic/$queue.ppd", - "http://$server:631/printers/$queue.ppd")); - } - if (-r "$::prefix/etc/foomatic/$queue.ppd") { - $configfilecontent = - $suites->{$suite}{make}($printer, $queue, - $configprefix, - $configfilecontent); - } - } - } - # Update local printer queues - foreach my $queue (keys(%{$printer->{configured}})) { - # Check if we have a PPD file - if (! -r "$::prefix/etc/foomatic/$queue.ppd") { - if (-r "$::prefix/etc/cups/ppd/$queue.ppd") { - # If we have a PPD file in the CUPS config dir, link to it - run_program::rooted($::prefix, - "ln", "-sf", - "/etc/cups/ppd/$queue.ppd", - "/etc/foomatic/$queue.ppd"); - } elsif (-r "$::prefix/usr/share/postscript/ppd/$queue.ppd") { - # Check PPD directory of GPR, too - run_program::rooted($::prefix, - "ln", "-sf", - "/usr/share/postscript/ppd/$queue.ppd", - "/etc/foomatic/$queue.ppd"); - } else { - # No PPD file at all? We cannot set up this printer - next; - } - } - $configfilecontent = - $suites->{$suite}{make}($printer, $queue, $configprefix, - $configfilecontent); - } - # Patch PostScript output to print Euro symbol correctly also for - # the "Generic Printer" - my @parameters = @{$suites->{$suite}{param}}; - $configfilecontent = removeentry($parameters[0], $parameters[1], - $configfilecontent); - $configfilecontent = - addentry($parameters[0], - $parameters[1] . $suites->{$suite}{perl} . - $spoolers{$printer->{SPOOLER}}{print_gui}, - $configfilecontent); - # Write back Star Office configuration file - return eval { output("$::prefix$configfilename", $configfilecontent) }; -} - -sub add_cups_remote_to_office { - my ($suite, $printer, $queue) = @_; - # Do we have Star Office installed? - my $configfilename = find_config_file($suite); - return 1 unless $configfilename; - my $configprefix = $1 if $configfilename =~ m!$suites->{$suite}{file_name}!; - # Load Star Office printer config file - my $configfilecontent = cat_("$::prefix$configfilename"); - # Update remote CUPS queues - if ($printer->{SPOOLER} eq "cups" && - (-x "$::prefix/usr/bin/curl" || -x "$::prefix/usr/bin/wget")) { - my @printerlist = printer::cups::get_remote_queues(); - foreach my $listentry (@printerlist) { - next unless $listentry =~ /^([^\|]+)\|([^\|]+)$/; - my $q = $1; - next if $q ne $queue; - my $server = $2; - # Remove server name from queue name - $q =~ s/^([^@]*)@.*$/$1/; - if (-x "$::prefix/usr/bin/wget") { - eval(run_program::rooted( - $::prefix, "/usr/bin/wget", "-O", - "/etc/foomatic/$queue.ppd", - "http://$server:631/printers/$q.ppd")); - } else { - eval(run_program::rooted( - $::prefix, "/usr/bin/curl", "-o", - "/etc/foomatic/$queue.ppd", - "http://$server:631/printers/$q.ppd")); - } - # Does the file exist and is it not an error message? - if (-r "$::prefix/etc/foomatic/$queue.ppd" && - cat_("$::prefix/etc/foomatic/$queue.ppd") =~ - /^\*PPD-Adobe/) { - $configfilecontent = - $suites->{$suite}{make}($printer, $queue, - $configprefix, - $configfilecontent); - } else { - unlink "$::prefix/etc/foomatic/$queue.ppd"; - return 0; - } - last if $suite eq 'Star Office'; - } - } - # Write back Star Office configuration file - return eval { output("$::prefix$configfilename", $configfilecontent) }; -} - -sub remove_printer_from_office { - my ($suite, $printer, $queue) = @_; - # Do we have Star Office installed? - my $configfilename = find_config_file($suite); - return 1 unless $configfilename; - my $configprefix = $1 if $configfilename =~ m!$suites->{$suite}{file_name}!; - # Load Star Office printer config file - my $configfilecontent = cat_("$::prefix$configfilename"); - # Remove the printer entry - $configfilecontent = - $suites->{$suite}{remove}($printer, $queue, $configprefix, - $configfilecontent); - # Write back Star Office configuration file - return eval { output("$::prefix$configfilename", $configfilecontent) }; -} - -sub remove_local_printers_from_office { - my ($suite, $printer) = @_; - # Do we have Star Office installed? - my $configfilename = find_config_file($suite); - return 1 unless $configfilename; - my $configprefix = $1 if $configfilename =~ m!$suites->{$suite}{file_name}!; - # Load Star Office printer config file - my $configfilecontent = cat_("$::prefix$configfilename"); - # Remove the printer entries - foreach my $queue (keys(%{$printer->{configured}})) { - $configfilecontent = - $suites->{$suite}{remove}($printer, $queue, $configprefix, - $configfilecontent); - } - # Write back Star Office configuration file - return eval { output("$::prefix$configfilename", $configfilecontent) }; -} - - -sub makestarofficeprinterentry { - my ($printer, $queue, $configprefix, $configfile) = @_; - # Set default printer - if ($queue eq $printer->{DEFAULT}) { - $configfile = removeentry("windows", "device=", $configfile); - $configfile = addentry("windows", - "device=$queue,$queue PostScript,$queue", - $configfile); - } - # Make an entry in the "[devices]" section - $configfile = removeentry("devices", "$queue=", $configfile); - $configfile = addentry("devices", - "$queue=$queue PostScript,$queue", - $configfile); - # Make an entry in the "[ports]" section - # The "perl" command patches the PostScript output to print the Euro - # symbol correctly. - $configfile = removeentry("ports", "$queue=", $configfile); - $configfile = addentry("ports", - qq($queue=/usr/bin/perl -p -e "s=16#80 /euro=16#80 /Euro=" | /usr/bin/) . $spoolers{$printer->{SPOOLER}}{print_command} . " -P $queue", - $configfile); - # Make printer's section - $configfile = addsection("$queue,PostScript,$queue", $configfile); - # Load PPD file - my $ppd = cat_("$::prefix/etc/foomatic/$queue.ppd"); - # Set the PostScript level - my $pslevel; - if ($ppd =~ /^\s*\*LanguageLevel:\s*\"?([^\s\"]+)\"?\s*$/m) { - $pslevel = $1; - $pslevel = "2" if $pslevel eq "3"; - } else { $pslevel = "2" } - $configfile = removeentry("$queue.PostScript.$queue", - "Level=", $configfile); - $configfile = addentry("$queue.PostScript.$queue", - "Level=$pslevel", $configfile); - # Set Color/BW - my $color = $ppd =~ /^\s*\*ColorDevice:\s*\"?([Tt]rue)\"?\s*$/m ? "1" : "0"; - $configfile = removeentry("$queue.PostScript.$queue", "BitmapColor=", $configfile); - $configfile = addentry("$queue.PostScript.$queue", "BitmapColor=$color", $configfile); - # Set the default paper size - if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) { - my $papersize = $1; - $configfile = removeentry("$queue.PostScript.$queue", "PageSize=", $configfile); - $configfile = removeentry("$queue.PostScript.$queue", "PPD_PageSize=", $configfile); - $configfile = addentry("$queue.PostScript.$queue", "PageSize=$papersize", $configfile); - $configfile = addentry("$queue.PostScript.$queue", "PPD_PageSize=$papersize", $configfile); - } - # Link the PPD file - run_program::rooted($::prefix, - "ln", "-sf", "/etc/foomatic/$queue.ppd", - "$configprefix/share/xp3/ppds/$queue.PS"); - return $configfile; -} - -sub makeopenofficeprinterentry { - my ($printer, $queue, $configprefix, $configfile) = @_; - # Make printer's section - $configfile = addsection($queue, $configfile); - # Load PPD file - my $ppd = cat_("$::prefix/etc/foomatic/$queue.ppd"); - # "PPD_PageSize" line - if ($ppd =~ /^\s*\*DefaultPageSize:\s*(\S+)\s*$/m) { - my $papersize = $1; - $configfile = removeentry($queue, - "PPD_PageSize=", $configfile); - $configfile = addentry($queue, - "PPD_PageSize=$papersize", $configfile); - } - # "Command" line - # The "perl" command patches the PostScript output to print the Euro - # symbol correctly. - $configfile = removeentry($queue, "Command=", $configfile); - $configfile = addentry($queue, - qq(Command=/usr/bin/perl -p -e "s=/euro /unused=/Euro /unused=" | /usr/bin/) . $spoolers{$printer->{SPOOLER}}{print_command} . " -P $queue", - $configfile); - # "Comment" line - $configfile = removeentry($queue, "Comment=", $configfile); - if ($printer->{configured}{$queue} && - $printer->{configured}{$queue}{queuedata}{desc}) { - $configfile = addentry( - $queue, - "Comment=$printer->{configured}{$queue}{queuedata}{desc}", - $configfile); - } else { - $configfile = addentry($queue, - "Comment=", - $configfile); - } - # "Location" line - $configfile = removeentry($queue, "Location=", $configfile); - if ($printer->{configured}{$queue} && - $printer->{configured}{$queue}{queuedata}{loc}) { - $configfile = addentry( - $queue, - "Location=$printer->{configured}{$queue}{queuedata}{loc}", - $configfile); - } else { - $configfile = addentry($queue, "Location=", $configfile); - } - # "DefaultPrinter" line - $configfile = removeentry($queue, "DefaultPrinter=", $configfile); - my $default = "0"; - if ($queue eq $printer->{DEFAULT}) { - $default = "1"; - # "DefaultPrinter=0" for the "Generic Printer" - $configfile = removeentry("Generic Printer", "DefaultPrinter=", - $configfile); - $configfile = addentry("Generic Printer", - "DefaultPrinter=0", - $configfile); - } - $configfile = addentry($queue, "DefaultPrinter=$default", $configfile); - # "Printer" line - $configfile = removeentry($queue, "Printer=", $configfile); - $configfile = addentry($queue, "Printer=$queue/$queue", $configfile); - # Link the PPD file - run_program::rooted($::prefix, - "ln", "-sf", "/etc/foomatic/$queue.ppd", - "$configprefix/share/psprint/driver/$queue.PS"); - return $configfile; -} - -sub removestarofficeprinterentry { - my ($_printer, $queue, $configprefix, $configfile) = @_; - # Remove default printer entry - $configfile = removeentry("windows", "device=$queue,", $configfile); - # Remove entry in the "[devices]" section - $configfile = removeentry("devices", "$queue=", $configfile); - # Remove entry in the "[ports]" section - $configfile = removeentry("ports", "$queue=", $configfile); - # Remove "[$queue,PostScript,$queue]" section - $configfile = removesection("$queue,PostScript,$queue", $configfile); - # Remove Link of PPD file - run_program::rooted($::prefix, - "rm", "-f", - "$configprefix/share/xp3/ppds/$queue.PS"); - return $configfile; -} - -sub removeopenofficeprinterentry { - my ($_printer, $queue, $configprefix, $configfile) = @_; - # Remove printer's section - $configfile = removesection($queue, $configfile); - # Remove Link of PPD file - run_program::rooted($::prefix, - "rm", "-f", - "$configprefix/share/psprint/driver/$queue.PS"); - return $configfile; -} - -sub find_config_file { - my ($suite) = @_; - my $configfilenames = $suites->{$suite}{files}; - foreach my $configfilename (@$configfilenames) { - local *F; - if (open F, "ls -r $::prefix$configfilename 2> /dev/null |") { - my $filename = <F>; - close F; - if ($filename) { - $filename =~ s/^$::prefix// if $::prefix; - # Work around a bug in the "ls" of "busybox". During - # installation it outputs the mask given on the command line - # instead of nothing when the mask does not match any file - next if $filename =~ /\*/; - return $filename; - } - } - } - return ""; -} - -sub writesofficeconfigfile { - my ($file, $filecontent) = @_; - eval { output("$::prefix$file", $filecontent) }; -} - diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm deleted file mode 100644 index 0eb075250..000000000 --- a/perl-install/printer/printerdrake.pm +++ /dev/null @@ -1,4600 +0,0 @@ -package printer::printerdrake; -# $Id$ - -use strict; - -use common; -use modules; -use network::network; -use log; -use interactive; -use printer::main; -use printer::services; -use printer::detect; -use printer::default; -use printer::data; - -my $companyname = "Mandrakesoft"; -my $distroname = "Mandrakelinux"; -my $shortdistroname = "Mandrakelinux"; -my $domainname = "mandrakesoft.com"; - -my $hp1000fwtext = N("The HP LaserJet 1000 needs its firmware to be uploaded after being turned on. Download the Windows driver package from the HP web site (the firmware on the printer's CD does not work) and extract the firmware file from it by uncompresing the self-extracting '.exe' file with the 'unzip' utility and searching for the 'sihp1000.img' file. Copy this file into the '/etc/printer' directory. There it will be found by the automatic uploader script and uploaded whenever the printer is connected and turned on. -"); - -1; - -sub config_cups { - my ($printer, $in, $upNetwork) = @_; - - local $::isWizard = 0; - # Check whether the network functionality is configured and - # running - if (!check_network($printer, $in, $upNetwork, 0)) { return 0 }; - - #$in->set_help('configureRemoteCUPSServer') if $::isInstall; - #- hack to handle cups remote server printing, - #- first read /etc/cups/cupsd.conf for variable BrowsePoll address:port - # Return value: 0 when nothing was changed ("Apply" never pressed), 1 - # when "Apply" was at least pressed once. - my $retvalue = 0; - # Read CUPS config file - @{$printer->{cupsconfig}{cupsd_conf}} = - printer::main::read_cupsd_conf(); - printer::main::read_cups_config($printer); - # Read state of japanese text printing mode - my $jap_textmode = printer::main::get_jap_textmode(); - # Read state for auto-correction of cupsd.conf - $printer->{cupsconfig}{autocorrection} = - printer::main::get_cups_autoconf(); - my $oldautocorr = $printer->{cupsconfig}{autocorrection}; - # Human-readable strings for hosts onto which the local printers - # are shared - my $maindone; - while (!$maindone) { - my $sharehosts = printer::main::makesharehostlist($printer); - my $browsepoll = printer::main::makebrowsepolllist($printer); - my $buttonclicked; - #- Show dialog - if ($in->ask_from_ - ( - { - title => N("CUPS printer configuration"), - messages => N("Here you can choose whether the printers connected to this machine should be accessible by remote machines and by which remote machines.") . - N("You can also decide here whether printers on remote machines should be automatically made available on this machine."), - }, - [ - { text => N("The printers on this machine are available to other computers"), type => 'bool', - val => \$printer->{cupsconfig}{localprintersshared} }, - { text => N("Automatically find available printers on remote machines"), type => 'bool', - val => \$printer->{cupsconfig}{remotebroadcastsaccepted} }, - { val => N("Printer sharing on hosts/networks: ") . - ($printer->{cupsconfig}{customsharingsetup} ? - N("Custom configuration") : - ($#{$sharehosts->{list}} >= 0 ? - ($#{$sharehosts->{list}} > 1 ? - join(", ", @{$sharehosts->{list}}[0,1]) . " ..." : - join(", ", @{$sharehosts->{list}})) : - N("No remote machines"))), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = "sharehosts"; - 1; - }, - disabled => sub { - (!$printer->{cupsconfig}{localprintersshared} && - !$printer->{cupsconfig}{remotebroadcastsaccepted}); - } }, - { val => N("Additional CUPS servers: ") . - ($#{$browsepoll->{list}} >= 0 ? - ($#{$browsepoll->{list}} > 1 ? - join(", ", @{$browsepoll->{list}}[0,1]) . " ..." : - join(", ", @{$browsepoll->{list}})) : - N("None")), - type => 'button', - help => N("To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."), - clicked_may_quit => sub { - $buttonclicked = "browsepoll"; - 1; - } }, - { text => N("Japanese text printing mode"), - help => N("Turning on this allows to print plain text files in japanese language. Only use this function if you really want to print text in japanese, if it is activated you cannot print accentuated characters in latin fonts any more and you will not be able to adjust the margins, the character size, etc. This setting only affects printers defined on this machine. If you want to print japanese text on a printer set up on a remote machine, you have to activate this function on that remote machine."), - type => 'bool', - val => \$jap_textmode }, - if_($printer->{expert}, - { text => N("Automatic correction of CUPS configuration"), - type => 'bool', - help => N("When this option is turned on, on every startup of CUPS it is automatically made sure that - -- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS - -- if /etc/cups/cupsd.conf is missing, it will be created - -- when printer information is broadcasted, it does not contain \"localhost\" as the server name. - -If some of these measures lead to problems for you, turn this option off, but then you have to take care of these points."), - val => \$printer->{cupsconfig}{autocorrection} }), - ] - ) - ) { - if ($buttonclicked eq "sharehosts") { - # Show dialog to add hosts to share printers to - my $subdone = 0; - my $choice; - while (!$subdone) { - # Entry should be edited when double-clicked - $buttonclicked = "edit"; - $in->ask_from_ - ( - { title => N("Sharing of local printers"), - messages => N("These are the machines and networks on which the locally connected printer(s) should be available:"), - ok => "", - cancel => "", - }, - # List the hosts - [ { val => \$choice, format => \&translate, - sort => 0, separator => "####", - tree_expanded => 1, - quit_if_double_click => 1, - allow_empty_list => 1, - list => $sharehosts->{list} }, - { val => N("Add host/network"), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = "add"; - 1; - } }, - { val => N("Edit selected host/network"), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = "edit"; - 1; - }, - disabled => sub { - return ($#{$sharehosts->{list}} < 0); - } }, - { val => N("Remove selected host/network"), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = "remove"; - 1; - }, - disabled => sub { - return ($#{$sharehosts->{list}} < 0); - } }, - { val => N("Done"), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = ""; - $subdone = 1; - 1; - } }, - ] - ); - if ($buttonclicked eq "add" || - $buttonclicked eq "edit") { - my ($hostchoice, $ip); - if ($buttonclicked eq "add") { - # Use first entry as default for a new entry - $hostchoice = N("Local network(s)"); - } else { - if ($sharehosts->{invhash}{$choice} =~ /^\@/) { - # Entry to edit is not an IP address - $hostchoice = $choice; - } else { - # Entry is an IP address - $hostchoice = - N("IP address of host/network:"); - $ip = $sharehosts->{invhash}{$choice}; - } - } - my @menu = N("Local network(s)"); - my @interfaces = - printer::detect::getNetworkInterfaces(); - foreach my $interface (@interfaces) { - push @menu, N("Interface \"%s\"", $interface); - } - push @menu, N("IP address of host/network:"); - # Show the dialog - my $address; - my $oldaddress = - ($buttonclicked eq "edit" ? - $sharehosts->{invhash}{$choice} : ""); - if ($in->ask_from_ - ( - { title => N("Sharing of local printers"), - messages => N("Choose the network or host on which the local printers should be made available:"), - callbacks => { - complete => sub { - if ($hostchoice eq - N("IP address of host/network:") && - $ip =~ /^\s*$/) { - - $in->ask_warn(N("Error"), N("Host/network IP address missing.")); - return (1,1); - } - if ($hostchoice eq - N("IP address of host/network:") && - !printer::main::is_network_ip($ip)) { - - $in->ask_warn(N("Error"), -N("The entered host/network IP is not correct.\n") . -N("Examples for correct IPs:\n") . - "192.168.100.194\n" . - "10.0.0.*\n" . - "10.1.*\n" . - "192.168.100.0/24\n" . - "192.168.100.0/255.255.255.0\n" -); - return (1,1); - } - if ($hostchoice eq $menu[0]) { - $address = '@LOCAL'; - } elsif ($hostchoice eq $menu[-1]) { - $address = $ip; - } else { - ($address) = - grep { $hostchoice =~ /$_/ } - @interfaces; - $address = "\@IF($address)"; - } - # Check whether item is duplicate - if ($address ne $oldaddress && - member($address, - @{$printer->{cupsconfig}{clientnetworks}})) { - $in->ask_warn(N("Error"), - N("This host/network is already in the list, it cannot be added again.\n")); - if ($hostchoice eq - N("IP address of host/network:")) { - return (1,1); - } else { - return (1,0); - } - } - return 0; - }, - }, - }, - # List the host types - [ { val => \$hostchoice, format => \&translate, - type => 'list', - sort => 0, - list => \@menu }, - { val => \$ip, - disabled => sub { - $hostchoice ne - N("IP address of host/network:"); - } }, - ], - )) { - # OK was clicked, insert new item into the list - if ($buttonclicked eq "add") { - push(@{$printer->{cupsconfig}{clientnetworks}}, - $address); - } else { - @{$printer->{cupsconfig}{clientnetworks}} = - map { ($_ eq - $sharehosts->{invhash}{$choice} ? - $address : $_) } - @{$printer->{cupsconfig}{clientnetworks}}; - } - # Refresh list of hosts - $sharehosts = - printer::main::makesharehostlist($printer); - # We have modified the configuration now - $printer->{cupsconfig}{customsharingsetup} = 0; - # Position the list cursor on the new/modified - # item - $choice = $sharehosts->{hash}{$address}; - } - } elsif ($buttonclicked eq "remove") { - @{$printer->{cupsconfig}{clientnetworks}} = - grep { $_ ne $sharehosts->{invhash}{$choice} } - @{$printer->{cupsconfig}{clientnetworks}}; - # Refresh list of hosts - $sharehosts = - printer::main::makesharehostlist($printer); - # We have modified the configuration now - $printer->{cupsconfig}{customsharingsetup} = 0; - } - } - # If we have no entry in the list, we do not - # share the local printers, mark this - if ($#{$printer->{cupsconfig}{clientnetworks}} < 0) { - $printer->{cupsconfig}{localprintersshared} = 0; - $printer->{cupsconfig}{remotebroadcastsaccepted} = 0; - } - } elsif ($buttonclicked eq "browsepoll") { - # Show dialog to add hosts to "BrowsePoll" from - my $subdone = 0; - my $choice; - while (!$subdone) { - # Entry should be edited when double-clicked - $buttonclicked = "edit"; - $in->ask_from_ - ( - { title => N("Accessing printers on remote CUPS servers"), - messages => N("Add here the CUPS servers whose printers you want to use. You only need to do this if the servers do not broadcast their printer information into the local network."), - ok => "", - cancel => "", - }, - # List the hosts - [ { val => \$choice, format => \&translate, - sort => 0, separator => "####", - tree_expanded => 1, - quit_if_double_click => 1, - allow_empty_list => 1, - list => $browsepoll->{list} }, - { val => N("Add server"), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = "add"; - 1; - } }, - { val => N("Edit selected server"), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = "edit"; - 1; - }, - disabled => sub { - return ($#{$browsepoll->{list}} < 0); - } }, - { val => N("Remove selected server"), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = "remove"; - 1; - }, - disabled => sub { - return ($#{$browsepoll->{list}} < 0); - } }, - { val => N("Done"), - type => 'button', - clicked_may_quit => sub { - $buttonclicked = ""; - $subdone = 1; - 1; - } }, - ] - ); - if ($buttonclicked eq "add" || - $buttonclicked eq "edit") { - my ($ip, $port); - if ($buttonclicked eq "add") { - # Use default port - $port = '631'; - } else { - if ($browsepoll->{invhash}{$choice} =~ - /^([^:]+):([^:]+)$/) { - # Entry to edit has IP and port - $ip = $1; - $port = $2; - } else { - # Entry is only an IP, no port, so take - # the default port 631 - $ip = $browsepoll->{invhash}{$choice}; - $port = '631'; - } - } - # Show the dialog - my $address; - my $oldaddress = - ($buttonclicked eq "edit" ? - $browsepoll->{invhash}{$choice} : ""); - if ($in->ask_from_ - ( - { title => N("Accessing printers on remote CUPS servers"), - messages => N("Enter IP address and port of the host whose printers you want to use.") . ' ' . - N("If no port is given, 631 will be taken as default."), - callbacks => { - complete => sub { - if ($ip =~ /^\s*$/) { - $in->ask_warn(N("Error"), N("Server IP missing!")); - return (1,0); - } - if ($ip !~ - /^\s*(\d+\.\d+\.\d+\.\d+)\s*$/) { - $in->ask_warn(N("Error"), -N("The entered IP is not correct.\n") . -N("Examples for correct IPs:\n") . - "192.168.100.194\n" . - "10.0.0.2\n" -); - return (1,0); - } else { - $ip = $1; - } - if ($port !~ /\S/) { - $port = '631'; - } elsif ($port !~ /^\s*(\d+)\s*$/) { - $in->ask_warn(N("Error"), N("The port number should be an integer!")); - return (1,1); - } else { - $port = $1; - } - $address = "$ip:$port"; - # Check whether item is duplicate - if ($address ne $oldaddress && - member($address, - @{$printer->{cupsconfig}{BrowsePoll}})) { - $in->ask_warn(N("Error"), - N("This server is already in the list, it cannot be added again.\n")); - return (1,0); - } - return 0; - }, - }, - }, - # Ask for IP and port - [ { val => \$ip, - label => N("IP address") }, - { val => \$port, - label => N("Port") }, - ], - )) { - # OK was clicked, insert new item into the list - if ($buttonclicked eq "add") { - push(@{$printer->{cupsconfig}{BrowsePoll}}, - $address); - } else { - @{$printer->{cupsconfig}{BrowsePoll}} = - map { ($_ eq - $browsepoll->{invhash}{$choice} ? - $address : $_) } - @{$printer->{cupsconfig}{BrowsePoll}}; - } - # Refresh list of hosts - $browsepoll = - printer::main::makebrowsepolllist($printer); - # Position the list cursor on the new/modified - # item - $choice = $browsepoll->{hash}{$address}; - } - } elsif ($buttonclicked eq "remove") { - @{$printer->{cupsconfig}{BrowsePoll}} = - grep { $_ ne $browsepoll->{invhash}{$choice} } - @{$printer->{cupsconfig}{BrowsePoll}}; - # Refresh list of hosts - $browsepoll = - printer::main::makebrowsepolllist($printer); - } - } - } else { - # We have clicked "OK" - $retvalue = 1; - $maindone = 1; - # Write state for auto-correction of cupsd.conf - if ($oldautocorr != - $printer->{cupsconfig}{autocorrection}) { - printer::main::set_cups_autoconf - ($printer->{cupsconfig}{autocorrection}); - } - # Write state of japanese text printing mode - printer::main::set_jap_textmode($jap_textmode); - # Write cupsd.conf - printer::main::write_cups_config($printer); - my $w = - $in->wait_message(N("Printerdrake"), - N("Restarting CUPS...")); - printer::main::write_cupsd_conf - (@{$printer->{cupsconfig}{cupsd_conf}}); - undef $w; - } - } else { - # Cancel clicked - $maindone = 1; - } - } - printer::main::clean_cups_config($printer); - return $retvalue; -} - -sub choose_printer_type { - my ($printer, $in, $upNetwork) = @_; - my $havelocalnetworks = check_network($printer, $in, $upNetwork, 1) && - printer::detect::getIPsInLocalNetworks() != (); - $printer->{str_type} = $printer_type_inv{$printer->{TYPE}}; - my $autodetect = 0; - $autodetect = 1 if $printer->{AUTODETECT}; - my @printertypes = printer::main::printer_type($printer); - $in->ask_from_( - { title => N("Select Printer Connection"), - messages => N("How is the printer connected?") . - if_($printer->{SPOOLER} eq "cups", - N(" -Printers on remote CUPS servers do not need to be configured here; these printers will be automatically detected.")) . - if_(!$havelocalnetworks, - N("\nWARNING: No local network connection active, remote printers can neither be detected nor tested!")), - }, - [ - { val => \$printer->{str_type}, - list => \@printertypes, - not_edit => 1, sort => 0, - type => 'list' }, - { text => N("Printer auto-detection (Local, TCP/Socket, SMB printers, and device URI)"), - type => 'bool', val => \$autodetect } - ] - ) or return 0; - $printer->{AUTODETECT} = $autodetect ? 1 : undef; - $printer->{TYPE} = $printer_type{$printer->{str_type}}; - 1; -} - -sub setup_printer_connection { - my ($printer, $in, $upNetwork) = @_; - # Choose the appropriate connection config dialog - my $done = 1; - for ($printer->{TYPE}) { - /LOCAL/ and setup_local_autoscan($printer, $in, $upNetwork) and last; - /LPD/ and setup_lpd( $printer, $in, $upNetwork) and last; - /SOCKET/ and setup_socket( $printer, $in, $upNetwork) and last; - /SMB/ and setup_smb( $printer, $in, $upNetwork) and last; - /NCP/ and setup_ncp( $printer, $in, $upNetwork) and last; - /URI/ and setup_uri( $printer, $in, $upNetwork) and last; - /POSTPIPE/ and setup_postpipe( $printer, $in) and last; - $done = 0; last; - } - return $done; -} - -sub first_time_dialog { - my ($printer, $in, $upNetwork) = @_; - return 1 if printer::default::get_spooler() || $::isInstall; - - my $w = $in->wait_message(N("Printerdrake"), N("Checking your system...")); - - # Auto-detect local printers - my @autodetected = printer::detect::local_detect(); - my $msg = do { - if (@autodetected) { - my @printerlist = - map { - my $entry = $_->{val}{DESCRIPTION}; - $entry ||= "$_->{val}{MANUFACTURER} $_->{val}{MODEL}"; - if_($entry, " - $entry\n"); - } @autodetected; - my $unknown_printers = @autodetected - @printerlist; - if (@printerlist) { - my $unknown_msg = - $unknown_printers == 1 ? - "\n" . N("and one unknown printer") : - $unknown_printers > 1 ? - "\n" . N("and %d unknown printers", $unknown_printers) : - ''; - my $main_msg = - @printerlist > 1 ? - N_("The following printers\n\n%s%s\nare directly connected to your system") : - $unknown_printers ? - N_("The following printer\n\n%s%s\nare directly connected to your system") : - N_("The following printer\n\n%s%s\nis directly connected to your system"); - sprintf($main_msg, join('', @printerlist), $unknown_msg); - } else { - $unknown_printers == 1 ? - N("\nThere is one unknown printer directly connected to your system") : - N("\nThere are %d unknown printers directly connected to your system", $unknown_printers); - } - } else { - N("There are no printers found which are directly connected to your machine"); - } - }; - $msg .= N(" (Make sure that all your printers are connected and turned on).\n"); - - # Do we have a local network? - - # If networking is configured, start it, but don't ask the user to - # configure networking. - my $havelocalnetworks = - check_network($printer, $in, $upNetwork, 1) && - printer::detect::getIPsInLocalNetworks() != (); - - # Finish building the dialog text - my $question = ($havelocalnetworks ? - (@autodetected ? - N("Do you want to enable printing on the printers mentioned above or on printers in the local network?\n") : - N("Do you want to enable printing on printers in the local network?\n")) : - (@autodetected ? - N("Do you want to enable printing on the printers mentioned above?\n") : - N("Are you sure that you want to set up printing on this machine?\n"))); - my $warning = N("NOTE: Depending on the printer model and the printing system up to %d MB of additional software will be installed.", 80); - my $dialogtext = "$msg\n$question\n$warning"; - - # Close wait message - undef $w; - - # Show dialog - - my $do_it = N("Yes"); - my $quit = N("Quit"); - my @choices = ($do_it, $quit); - my $choice = $in->ask_from_list(N("Printerdrake"), $dialogtext, - \@choices, $quit); - return ($choice eq $do_it); -} - -sub configure_new_printers { - my ($printer, $in, $_upNetwork) = @_; - - # This procedure auto-detects local printers and checks whether - # there is already a queue for them. If there is no queue for an - # auto-detected printer, a queue gets set up non-interactively. - - # Experts can have weird things as self-made CUPS backends, so do not - # automatically pollute the system with unwished queues in expert - # mode - return 1 if $printer->{expert}; - - # Wait message - my $w = $in->wait_message(N("Printerdrake"), - N("Searching for new printers...")); - - # When HPOJ is running, it blocks the printer ports on which it is - # configured, so we stop it here. If it is not installed or not - # configured, this command has no effect. - require services; - services::stop("hpoj"); - - # Auto-detect local printers - my @autodetected = printer::detect::local_detect(); - - # We are ready with auto-detection, so we restart HPOJ here. If it - # is not installed or not configured, this command has no effect. - services::start("hpoj"); - - # No printer found? So no need of new queues. - return 1 if !@autodetected; - - # Black-list all auto-detected printers for which there is already - # a queue - my @blacklist; - foreach my $queue (keys %{$printer->{configured}}) { - # Does the URI of this installed queue match one of the autodetected - # printers? - my $uri = $printer->{configured}{$queue}{queuedata}{connect}; - my $p = printer::main::autodetectionentry_for_uri - ($uri, @autodetected); - if (defined($p)) { - # Blacklist the port - push(@blacklist, $p->{port}); - } - } - - # Now install queues for all auto-detected printers which have no queue - # yet - $printer->{noninteractive} = 1; # Suppress all interactive steps - my $configapps = 0; - foreach my $p (@autodetected) { - if (!member($p->{port}, @blacklist)) { - # Initialize some variables for queue setup - $printer->{NEW} = 1; - $printer->{TYPE} = "LOCAL"; - $printer->{currentqueue} = { queue => "", - foomatic => 0, - desc => "", - loc => "", - make => "", - model => "", - printer => "", - driver => "", - connect => "", - spooler => $printer->{SPOOLER}, - }; - # Generate a queue name from manufacturer and model - my $queue; - my $unknown; - if (!$p->{val}{MANUFACTURER} || !$p->{val}{MODEL} || - $p->{val}{MODEL} eq N("Unknown Model")) { - $queue = N("Printer"); - $unknown = 1; - } else { - my $make = $p->{val}{MANUFACTURER}; - if ($p->{val}{SKU}) { - $queue = $make . $p->{val}{SKU}; - } else { - $queue = $make . $p->{val}{MODEL}; - } - $queue =~ s/series//gi; - $queue =~ s/[\s\(\)\-,]//g; - $queue =~ s/^$make$make/$make/; - } - # Append a number if the queue name already exists - if ($printer->{configured}{$queue}) { - $queue =~ s/(\d)$/$1_/; - my $i = 1; - while ($printer->{configured}{"$queue$i"}) { - $i++; - } - $queue .= $i; - } - $printer->{currentqueue}{queue} = $queue; - undef $w; - $w = $in->wait_message(N("Printerdrake"), - ($unknown ? - N("Configuring printer ...") : - N("Configuring printer \"%s\"...", - $printer->{currentqueue}{queue}))); - # Do configuration of multi-function devices and look up - # model name in the printer database - setup_common($printer, $in, $p->{val}{DESCRIPTION}, $p->{port}, - 1, @autodetected) or next; - # Set also OLD_QUEUE field so that the subroutines for the - # configuration work correctly. - $printer->{OLD_QUEUE} = $printer->{QUEUE} = - $printer->{currentqueue}{queue}; - # Do the steps of queue setup - get_db_entry($printer, $in); - # Let the user choose the model manually if it could not be - # auto-detected. - if (!$printer->{DBENTRY}) { - # Set the OLD_CHOICE to a non-existing value - $printer->{OLD_CHOICE} = "XXX"; - # Set model selection cursor onto the "Raw Printer" entry. - $printer->{DBENTRY} = N("Raw printer (No driver)"); - # Info about what was detected - my $info = N("(") . if_($p->{val}{DESCRIPTION}, - $p->{val}{DESCRIPTION} . N(" on ")) . - $p->{port} . N(")"); - # Remove wait message - undef $w; - # Choose the printer/driver from the list - $printer->{DBENTRY} = - $in->ask_from_treelist(N("Printer model selection"), - N("Which printer model do you have?") . - N(" - -Printerdrake could not determine which model your printer %s is. Please choose the correct model from the list.", $info) . " " . - N("If your printer is not listed, choose a compatible (see printer manual) or a similar one."), '|', - [ keys %printer::main::thedb ], $printer->{DBENTRY}) or next; - if ($unknown) { - # Rename the queue according to the chosen model - $queue = $printer->{DBENTRY}; - $queue =~ s/\|/ /g; - $printer->{currentqueue}{desc} = $queue; - $queue =~ s/series//gi; - $queue =~ s/[\s\(\)\-,]//g; - # Append a number if the queue name already exists - if ($printer->{configured}{$queue}) { - $queue =~ s/(\d)$/$1_/; - my $i = 1; - while ($printer->{configured}{"$queue$i"}) { - $i++; - } - $queue .= $i; - } - $printer->{currentqueue}{queue} = $queue; - $printer->{QUEUE} = $printer->{currentqueue}{queue}; - } - # Restore wait message - $w = $in->wait_message(N("Printerdrake"), - N("Configuring printer \"%s\"...", - $printer->{currentqueue}{queue})); - } - get_printer_info($printer, $in) or next; - setup_options($printer, $in) or next; - configure_queue($printer, $in) or next; - $configapps = 1; - # If there is no default printer set, let this one get the - # default - if (!$printer->{DEFAULT}) { - $printer->{DEFAULT} = $printer->{QUEUE}; - printer::default::set_printer($printer); - } - } - # Delete some variables - foreach (qw(OLD_QUEUE QUEUE TYPE str_type DBENTRY ARGS OLD_CHOICE)) { - $printer->{$_} = ""; - } - $printer->{currentqueue} = {}; - $printer->{complete} = 0; - } - # Configure the current printer queues in applications - undef $w; - if ($configapps) { - $w = - $in->wait_message(N("Printerdrake"), - N("Configuring applications...")); - printer::main::configureapplications($printer); - undef $w; - } - undef $printer->{noninteractive}; -} - -sub wizard_welcome { - my ($printer, $in, $upNetwork) = @_; - my $ret; - my $autodetectlocal = 0; - my $autodetectnetwork = 0; - my $autodetectsmb = 0; - # If networking is configured, start it, but don't ask the user to - # configure networking. - my $havelocalnetworks; - if ($printer->{expert}) { - $havelocalnetworks = 0; - undef $printer->{AUTODETECTNETWORK}; - undef $printer->{AUTODETECTSMB}; - } else { - $havelocalnetworks = check_network($printer, $in, $upNetwork, 1) && - printer::detect::getIPsInLocalNetworks() != (); - if (!$havelocalnetworks) { - undef $printer->{AUTODETECTNETWORK}; - undef $printer->{AUTODETECTSMB}; - } - $autodetectlocal = 1 if $printer->{AUTODETECTLOCAL}; - $autodetectnetwork = 1 if $printer->{AUTODETECTNETWORK}; - $autodetectsmb = 1 if $printer->{AUTODETECTSMB}; - } - if ($in) { - eval { - if ($printer->{expert}) { - if ($::isWizard) { - $ret = $in->ask_okcancel( - N("Add a new printer"), - N(" -Welcome to the Printer Setup Wizard - -This wizard allows you to install local or remote printers to be used from this machine and also from other machines in the network. - -It asks you for all necessary information to set up the printer and gives you access to all available printer drivers, driver options, and printer connection types.")); - } else { - $ret = 1; - } - } else { - $ret = $in->ask_from_( - { title => N("Add a new printer"), - messages => ($printer->{SPOOLER} ne "pdq" ? - ($havelocalnetworks ? N(" -Welcome to the Printer Setup Wizard - -This wizard will help you to install your printer(s) connected to this computer, connected directly to the network or to a remote Windows machine. - -Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. Also your network printer(s) and your Windows machines must be connected and turned on. - -Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network and/or Windows-hosted printers when you don't need it. - - Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now.") : N(" -Welcome to the Printer Setup Wizard - -This wizard will help you to install your printer(s) connected to this computer. - -Please plug in and turn on all printers connected to this machine so that it/they can be auto-detected. - - Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now.")) : - ($havelocalnetworks ? N(" -Welcome to the Printer Setup Wizard - -This wizard will help you to install your printer(s) connected to this computer or connected directly to the network. - -If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. Also your network printer(s) must be connected and turned on. - -Note that auto-detecting printers on the network takes longer than the auto-detection of only the printers connected to this machine. So turn off the auto-detection of network printers when you don't need it. - - Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now.") : N(" -Welcome to the Printer Setup Wizard - -This wizard will help you to install your printer(s) connected to this computer. - -If you have printer(s) connected to this machine, Please plug it/them in on this computer and turn it/them on so that it/they can be auto-detected. - - Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want to set up your printer(s) now."))) }, - [ - { text => N("Auto-detect printers connected to this machine"), type => 'bool', - val => \$autodetectlocal }, - if_($havelocalnetworks, - { text => N("Auto-detect printers connected directly to the local network"), type => 'bool', - val => \$autodetectnetwork }, - if_($printer->{SPOOLER} ne "pdq", - { text => N("Auto-detect printers connected to machines running Microsoft Windows"), type => 'bool', - val => \$autodetectsmb })), - ]); - $printer->{AUTODETECTLOCAL} = $autodetectlocal ? 1 : undef; - $printer->{AUTODETECTNETWORK} = $autodetectnetwork ? 1 : undef; - $printer->{AUTODETECTSMB} = $autodetectsmb && $printer->{SPOOLER} ne "pdq" ? 1 : undef; - } - }; - return $@ =~ /wizcancel/ ? 0 : $ret; - } -} - -sub wizard_congratulations { - my ($in) = @_; - if ($in) { - $in->ask_okcancel(N("Add a new printer"), - N(" -Congratulations, your printer is now installed and configured! - -You can print using the \"Print\" command of your application (usually in the \"File\" menu). - -If you want to add, remove, or rename a printer, or if you want to change the default option settings (paper input tray, printout quality, ...), select \"Printer\" in the \"Hardware\" section of the %s Control Center.", $shortdistroname)) - } -} - -sub setup_local_autoscan { - my ($printer, $in, $upNetwork) = @_; - my $queue = $printer->{OLD_QUEUE}; - my $expert_or_modify = $printer->{expert} || !$printer->{NEW}; - my $do_auto_detect = - ($expert_or_modify && - $printer->{AUTODETECT} || - (!$expert_or_modify && - ($printer->{AUTODETECTLOCAL} || - $printer->{AUTODETECTNETWORK} || - $printer->{AUTODETECTSMB}))); - - # If the user requested auto-detection of remote printers, check - # whether the network functionality is configured and running - if ($printer->{AUTODETECTNETWORK} || $printer->{AUTODETECTSMB}) { - return 0 unless check_network($printer, $in, $upNetwork, 0); - } - - my @autodetected; - my $menuentries = {}; -# $in->set_help('setupLocal') if $::isInstall; - if ($do_auto_detect) { - if (!$::testing && - !$expert_or_modify && $printer->{AUTODETECTSMB} && !files_exist('/usr/bin/smbclient')) { - $in->do_pkgs->install('samba-client') or do { - $in->ask_warn(N("Warning"), - N("Could not install the %s packages!", - "Samba client") . " " . - N("Skipping Windows/SMB server auto-detection")); - $printer->{AUTODETECTSMB} = 0; - return 0 if (!$printer->{AUTODETECTLOCAL} && - !$printer->{AUTODETECTNETWORK}); - }; - } - my $_w = $in->wait_message(N("Printer auto-detection"), N("Detecting devices...")); - # When HPOJ is running, it blocks the printer ports on which it is - # configured, so we stop it here. If it is not installed or not - # configured, this command has no effect. - require services; - services::stop("hpoj"); - @autodetected = ( - $expert_or_modify || $printer->{AUTODETECTLOCAL} ? printer::detect::local_detect() : (), - !$expert_or_modify ? printer::detect::whatNetPrinter($printer->{AUTODETECTNETWORK}, $printer->{AUTODETECTSMB}) : (), - ); - # We have more than one printer, so we must ask the user for a queue - # name in the fully automatic printer configuration. - $printer->{MORETHANONE} = $#autodetected > 0; - my @str; - foreach my $p (@autodetected) { - if ($p->{val}{DESCRIPTION}) { - my $menustr = $p->{val}{DESCRIPTION}; - if ($p->{port} =~ m!^/dev/lp(\d+)$!) { - $menustr .= N(" on parallel port #%s", $1); - } elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) { - $menustr .= N(", USB printer #%s", $1); - } elsif ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) { - $menustr .= N(", network printer \"%s\", port %s", $1, $2); - } elsif ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) { - $menustr .= N(", printer \"%s\" on SMB/Windows server \"%s\"", $2, $1); - } - $menustr .= " ($p->{port})" if $printer->{expert}; - $menuentries->{$menustr} = $p->{port}; - push @str, N("Detected %s", $menustr); - } else { - my $menustr; - if ($p->{port} =~ m!^/dev/lp(\d+)$!) { - $menustr = N("Printer on parallel port #%s", $1); - } elsif ($p->{port} =~ m!^/dev/usb/lp(\d+)$!) { - $menustr = N("USB printer #%s", $1); - } elsif ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) { - $menustr .= N("Network printer \"%s\", port %s", $1, $2); - } elsif ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) { - $menustr .= N("Printer \"%s\" on SMB/Windows server \"%s\"", $2, $1); - } - $menustr .= " ($p->{port})" if $printer->{expert}; - $menuentries->{$menustr} = $p->{port}; - } - } - my @port; - if ($printer->{expert}) { - @port = printer::detect::whatPrinterPort(); - LOOP: foreach my $q (@port) { - if (@str) { - foreach my $p (@autodetected) { - last LOOP if $p->{port} eq $q; - } - } - my $menustr; - if ($q =~ m!^/dev/lp(\d+)$!) { - $menustr = N("Printer on parallel port #%s", $1); - } elsif ($q =~ m!^/dev/usb/lp(\d+)$!) { - $menustr = N("USB printer #%s", $1); - } - $menustr .= " ($q)" if $printer->{expert}; - $menuentries->{$menustr} = $q; - } - } - # We are ready with auto-detection, so we restart HPOJ here. If it - # is not installed or not configured, this command has no effect. - printer::services::start("hpoj"); - } else { - # Always ask for queue name in recommended mode when no auto- - # detection was done - $printer->{MORETHANONE} = $#autodetected > 0; - my $m; - for ($m = 0; $m <= 2; $m++) { - my $menustr = N("Printer on parallel port #%s", $m); - $menustr .= " (/dev/lp$m)" if $printer->{expert}; - $menuentries->{$menustr} = "/dev/lp$m"; - $menustr = N("USB printer #%s", $m); - $menustr .= " (/dev/usb/lp$m)" if $printer->{expert}; - $menuentries->{$menustr} = "/dev/usb/lp$m"; - } - } - my @menuentrieslist = sort { - my @prefixes = ("/dev/lp", "/dev/usb/lp", "/dev/", "socket:", - "smb:"); - my $first = $menuentries->{$a}; - my $second = $menuentries->{$b}; - for (my $i = 0; $i <= $#prefixes; $i++) { - my $firstinlist = $first =~ m!^$prefixes[$i]!; - my $secondinlist = $second =~ m!^$prefixes[$i]!; - if ($firstinlist && !$secondinlist) { return -1 }; - if ($secondinlist && !$firstinlist) { return 1 }; - } - return $first cmp $second; - } keys(%$menuentries); - my $menuchoice = ""; - my $oldmenuchoice = ""; - my $device; - if ($printer->{configured}{$queue}) { - my $p = printer::main::autodetectionentry_for_uri - ($printer->{currentqueue}{connect}, @autodetected); - if (defined($p)) { - $device = $p->{port}; - $menuchoice = { reverse %$menuentries }->{$device}; - } - } - if ($menuchoice eq "" && @menuentrieslist > -1) { - $menuchoice = $menuentrieslist[0]; - $oldmenuchoice = $menuchoice; - $device = $menuentries->{$menuchoice} if $device eq ""; - } - if ($in) { -# $printer->{expert} or $in->set_help('configurePrinterDev') if $::isInstall; - if ($#menuentrieslist < 0) { # No menu entry - # auto-detection has failed, we must do all manually - $do_auto_detect = 0; - $printer->{MANUAL} = 1; - if ($printer->{expert}) { - $device = $in->ask_from_entry( - N("Local Printer"), - N("No local printer found! To manually install a printer enter a device name/file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."), - { - complete => sub { - if ($menuchoice eq "") { - $in->ask_warn(N("Error"), N("You must enter a device or file name!")); - return (1,0); - } - return 0; - } - }); - return 0 if $device eq ""; - } else { - $in->ask_warn(N("Printer auto-detection"), - N("No printer found!")); - return 0; - } - } else { - my $manualconf = 0; - $manualconf = 1 if $printer->{MANUAL} || !$do_auto_detect; - if (!$in->ask_from_( - { title => ($expert_or_modify ? - N("Local Printers") : - N("Available printers")), - messages => (($do_auto_detect ? - ($printer->{expert} ? - ($#menuentrieslist == 0 ? - (N("The following printer was auto-detected. ") . - ($printer->{NEW} ? - N("If it is not the one you want to configure, enter a device name/file name in the input line") : - N("Alternatively, you can specify a device name/file name in the input line"))) : - (N("Here is a list of all auto-detected printers. ") . - ($printer->{NEW} ? - N("Please choose the printer you want to set up or enter a device name/file name in the input line") : - N("Please choose the printer to which the print jobs should go or enter a device name/file name in the input line")))) : - ($#menuentrieslist == 0 ? - (N("The following printer was auto-detected. ") . - ($printer->{NEW} ? - N("The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\".") : - N("Currently, no alternative possibility is available"))) : - (N("Here is a list of all auto-detected printers. ") . - ($printer->{NEW} ? - N("Please choose the printer you want to set up. The configuration of the printer will work fully automatically. If your printer was not correctly detected or if you prefer a customized printer configuration, turn on \"Manual configuration\".") : - N("Please choose the printer to which the print jobs should go."))))) : - ($printer->{expert} ? - N("Please choose the port that your printer is connected to or enter a device name/file name in the input line") : - N("Please choose the port that your printer is connected to."))) . - if_($printer->{expert}, - N(" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."))), - callbacks => { - complete => sub { - unless ($menuchoice ne "") { - $in->ask_warn(N("Error"), N("You must choose/enter a printer/device!")); - return (1,0); - } - return 0; - }, - changed => sub { - if ($oldmenuchoice ne $menuchoice) { - $device = $menuentries->{$menuchoice}; - $oldmenuchoice = $menuchoice; - } - return 0; - } - } }, - [ - if_($printer->{expert}, { val => \$device }), - { val => \$menuchoice, list => \@menuentrieslist, - not_edit => !$printer->{expert}, format => \&translate, - allow_empty_list => 1, type => 'list' }, - if_(!$printer->{expert} && $do_auto_detect && $printer->{NEW}, - { text => N("Manual configuration"), type => 'bool', - val => \$manualconf }), - ] - )) { - return 0; - } - if ($device ne $menuentries->{$menuchoice}) { - $menuchoice = ""; - $do_auto_detect = 0; - } - $printer->{MANUAL} = $manualconf ? 1 : undef; - } - } - - #- LPD and LPRng need netcat ('nc') to access to socket printers - if (($printer->{SPOOLER} eq 'lpd' || $printer->{SPOOLER} eq 'lprng') && - !$::testing && $device =~ /^socket:/ && !files_exist('/usr/bin/nc')) { - $in->do_pkgs->install('nc') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "nc") . " " . - N("Aborting")); - return 0; - }; - } - - # Do configuration of multi-function devices and look up model name - # in the printer database - setup_common($printer, $in, $menuchoice, $device, $do_auto_detect, - @autodetected); - - 1; -} - -sub setup_lpd { - my ($printer, $in, $upNetwork) = @_; - - # Check whether the network functionality is configured and - # running - if (!check_network($printer, $in, $upNetwork, 0)) { return 0 }; - -# $in->set_help('setupLPD') if $::isInstall; - my ($uri, $remotehost, $remotequeue); - my $queue = $printer->{OLD_QUEUE}; - if ($printer->{configured}{$queue} && - $printer->{currentqueue}{connect} =~ m/^lpd:/) { - $uri = $printer->{currentqueue}{connect}; - if ($uri =~ m!^\s*lpd://([^/]+)/([^/]+)/?\s*$!) { - $remotehost = $1; - $remotequeue = $2; - } - } else { - $remotehost = ""; - $remotequeue = "lp"; - } - - return if !$in->ask_from(N("Remote lpd Printer Options"), -N("To use a remote lpd printer, you need to supply the hostname of the printer server and the printer name on that server."), [ -{ label => N("Remote host name"), val => \$remotehost }, -{ label => N("Remote printer name"), val => \$remotequeue } ], -complete => sub { - if ($remotehost eq "") { - $in->ask_warn(N("Error"), N("Remote host name missing!")); - return (1,0); - } - if ($remotequeue eq "") { - $in->ask_warn(N("Error"), N("Remote printer name missing!")); - return (1,1); - } - return 0; -} - ); - #- make the DeviceURI from user input. - $printer->{currentqueue}{connect} = "lpd://$remotehost/$remotequeue"; - - #- LPD does not support filtered queues to a remote LPD server by itself - #- It needs an additional program as "rlpr" - if ($printer->{SPOOLER} eq 'lpd' && !$::testing && - !files_exist('/usr/bin/rlpr')) { - $in->do_pkgs->install('rlpr') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "rlpr") . " " . - N("Aborting")); - return 0; - }; - } - - # Auto-detect printer model (works if host is an ethernet-connected - # printer) - my $modelinfo = printer::detect::getSNMPModel($remotehost); - my $auto_hpoj; - if (defined($modelinfo) && - $modelinfo->{MANUFACTURER} ne "" && - $modelinfo->{MODEL} ne "") { - $in->ask_warn(N("Information"), N("Detected model: %s %s", - $modelinfo->{MANUFACTURER}, $modelinfo->{MODEL})); - $auto_hpoj = 1; - } else { - $auto_hpoj = 0; - } - - # Do configuration of multi-function devices and look up model name - # in the printer database - setup_common($printer, $in, - "$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}", - $printer->{currentqueue}{connect}, $auto_hpoj, - ({port => $printer->{currentqueue}{connect}, - val => $modelinfo })); - - 1; -} - -sub setup_smb { - my ($printer, $in, $upNetwork) = @_; - - # Check whether the network functionality is configured and - # running - if (!check_network($printer, $in, $upNetwork, 0)) { return 0 }; - -# $in->set_help('setupSMB') if $::isInstall; - my ($uri, $smbuser, $smbpassword, $workgroup, $smbserver, $smbserverip, $smbshare); - my $queue = $printer->{OLD_QUEUE}; - if ($printer->{configured}{$queue} && - $printer->{currentqueue}{connect} =~ m/^smb:/) { - $uri = $printer->{currentqueue}{connect}; - my $parameters = $1 if $uri =~ m!^\s*smb://(.*)$!; - # Get the user's login and password from the URI - if ($parameters =~ m!([^@]*)@([^@]+)!) { - my $login = $1; - $parameters = $2; - if ($login =~ m!([^:]*):([^:]*)!) { - $smbuser = $1; - $smbpassword = $2; - } else { - $smbuser = $login; - $smbpassword = ""; - } - } else { - $smbuser = ""; - $smbpassword = ""; - } - # Get the workgroup, server, and share name - if ($parameters =~ m!([^/]*)/([^/]+)/([^/]+)$!) { - $workgroup = $1; - $smbserver = $2; - $smbshare = $3; - } elsif ($parameters =~ m!([^/]+)/([^/]+)$!) { - $workgroup = ""; - $smbserver = $1; - $smbshare = $2; - } else { - die qq(The "smb://" URI must at least contain the server name and the share name!\n); - } - if (is_ip($smbserver)) { - $smbserverip = $smbserver; - $smbserver = ""; - } - } - - my $autodetect = 0; - my @autodetected; - my $menuentries; - my @menuentrieslist; - my $menuchoice = ""; - my $oldmenuchoice = ""; - if ($printer->{AUTODETECT}) { - $autodetect = 1; - if (!$::testing && !files_exist('/usr/bin/smbclient')) { - $in->do_pkgs->install('samba-client') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "Samba client") . " " . - N("Aborting")); - return 0; - }; - } - my $_w = $in->wait_message(N("Printer auto-detection"), N("Scanning network...")); - @autodetected = printer::detect::net_smb_detect(); - my ($server, $share); - foreach my $p (@autodetected) { - my $menustr; - if ($p->{port} =~ m!^smb://([^/:]+)/([^/:]+)$!) { - $server = $1; - $share = $2; - } - if ($p->{val}{DESCRIPTION}) { - $menustr = $p->{val}{DESCRIPTION}; - $menustr .= N(", printer \"%s\" on server \"%s\"", - $share, $server); - } else { - $menustr = N("Printer \"%s\" on server \"%s\"", - $share, $server); - } - $menuentries->{$menustr} = $p->{port}; - if ($server eq $smbserver && - $share eq $smbshare) { - $menuchoice = $menustr; - } - } - @menuentrieslist = sort { - $menuentries->{$a} cmp $menuentries->{$b}; - } keys(%$menuentries); - if ($printer->{configured}{$queue} && - $printer->{currentqueue}{connect} =~ m/^smb:/ && - $menuchoice eq "") { - my $menustr; - if ($printer->{currentqueue}{make}) { - $menustr = "$printer->{currentqueue}{make} $printer->{currentqueue}{model}"; - $menustr .= N(", printer \"%s\" on server \"%s\"", - $smbshare, $smbserver); - } else { - $menustr = N("Printer \"%s\" on server \"%s\"", - $smbshare, $smbserver); - } - $menuentries->{$menustr} = "smb://$smbserver/$smbshare"; - unshift(@menuentrieslist, $menustr); - $menuchoice = $menustr; - } - if ($#menuentrieslist < 0) { - $autodetect = 0; - } elsif ($menuchoice eq "") { - $menuchoice = $menuentrieslist[0]; - if ($menuentries->{$menuentrieslist[0]} =~ - m!^smb://([^/:]+)/([^/:]+)$!) { - $smbserver = $1; - $smbshare = $2; - } - } - $oldmenuchoice = $menuchoice; - } - - return 0 if !$in->ask_from( - N("SMB (Windows 9x/NT) Printer Options"), - N("To print to a SMB printer, you need to provide the SMB host name (Note! It may be different from its TCP/IP hostname!) and possibly the IP address of the print server, as well as the share name for the printer you wish to access and any applicable user name, password, and workgroup information.") . - ($autodetect ? N(" If the desired printer was auto-detected, simply choose it from the list and then add user name, password, and/or workgroup if needed.") : ""), - [ - { label => N("SMB server host"), val => \$smbserver }, - { label => N("SMB server IP"), val => \$smbserverip }, - { label => N("Share name"), val => \$smbshare }, - { label => N("User name"), val => \$smbuser }, - { label => N("Password"), val => \$smbpassword, hidden => 1 }, - { label => N("Workgroup"), val => \$workgroup }, - if_($autodetect, - { label => N("Auto-detected"), - val => \$menuchoice, list => \@menuentrieslist, - not_edit => 1, format => \&translate, sort => 0, - allow_empty_list => 1, type => 'combo' }) ], - complete => sub { - if (!is_ip($smbserverip) && $smbserverip ne "") { - $in->ask_warn(N("Error"), N("IP address should be in format 1.2.3.4")); - return (1,1); - } - if ($smbserver eq "" && $smbserverip eq "") { - $in->ask_warn(N("Error"), N("Either the server name or the server's IP must be given!")); - return (1,0); - } - if ($smbshare eq "") { - $in->ask_warn(N("Error"), N("Samba share name missing!")); - return (1,2); - } - if ($smbpassword ne "") { - local $::isWizard = 0; - my $yes = $in->ask_yesorno( - N("SECURITY WARNING!"), - N("You are about to set up printing to a Windows account with password. Due to a fault in the architecture of the Samba client software the password is put in clear text into the command line of the Samba client used to transmit the print job to the Windows server. So it is possible for every user on this machine to display the password on the screen by issuing commands as \"ps auxwww\". - -We recommend to make use of one of the following alternatives (in all cases you have to make sure that only machines from your local network have access to your Windows server, for example by means of a firewall): - -Use a password-less account on your Windows server, as the \"GUEST\" account or a special account dedicated for printing. Do not remove the password protection from a personal account or the administrator account. - -Set up your Windows server to make the printer available under the LPD protocol. Then set up printing from this machine with the \"%s\" connection type in Printerdrake. - -", N("Printer on remote lpd server")) . - ($printer->{expert} ? - N("Set up your Windows server to make the printer available under the IPP protocol and set up printing from this machine with the \"%s\" connection type in Printerdrake. - -", N("Enter a printer device URI")) : "") . -N("Connect your printer to a Linux server and let your Windows machine(s) connect to it as a client. - -Do you really want to continue setting up this printer as you are doing now?"), 0); - return 0 if $yes; - return (1,2); - } - return 0; - }, - changed => sub { - return 0 if !$autodetect; - if ($oldmenuchoice ne $menuchoice) { - if ($menuentries->{$menuchoice} =~ m!^smb://([^/:]+)/([^/:]+)$!) { - $smbserver = $1; - $smbshare = $2; - } - $oldmenuchoice = $menuchoice; - } - return 0; - } - ); - #- make the DeviceURI from, try to probe for available variable to - #- build a suitable URI. - $printer->{currentqueue}{connect} = - join '', ("smb://", ($smbuser && ($smbuser . - ($smbpassword && ":$smbpassword") . '@')), ($workgroup && "$workgroup/"), - ($smbserver || $smbserverip), "/$smbshare"); - - if (!$::testing && !files_exist('/usr/bin/smbclient')) { - $in->do_pkgs->install('samba-client') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "Samba client") . " " . - N("Aborting")); - return 0; - }; - } - $printer->{SPOOLER} eq 'cups' and printer::main::restart_queue($printer); - 1; -} - -sub setup_ncp { - my ($printer, $in, $upNetwork) = @_; - - # Check whether the network functionality is configured and - # running - if (!check_network($printer, $in, $upNetwork, 0)) { return 0 }; - -# $in->set_help('setupNCP') if $::isInstall; - my ($uri, $ncpuser, $ncppassword, $ncpserver, $ncpqueue); - my $queue = $printer->{OLD_QUEUE}; - if ($printer->{configured}{$queue} && - $printer->{currentqueue}{connect} =~ m/^ncp:/) { - $uri = $printer->{currentqueue}{connect}; - my $parameters = $uri =~ m!^\s*ncp://(.*)$!; - # Get the user's login and password from the URI - if ($parameters =~ m!([^@]*)@([^@]+)!) { - my $login = $1; - $parameters = $2; - if ($login =~ m!([^:]*):([^:]*)!) { - $ncpuser = $1; - $ncppassword = $2; - } else { - $ncpuser = $login; - $ncppassword = ""; - } - } else { - $ncpuser = ""; - $ncppassword = ""; - } - # Get the workgroup, server, and share name - if ($parameters =~ m!([^/]+)/([^/]+)$!) { - $ncpserver = $1; - $ncpqueue = $2; - } else { - die qq(The "ncp://" URI must at least contain the server name and the share name!\n); - } - } - - return 0 if !$in->ask_from(N("NetWare Printer Options"), -N("To print on a NetWare printer, you need to provide the NetWare print server name (Note! it may be different from its TCP/IP hostname!) as well as the print queue name for the printer you wish to access and any applicable user name and password."), [ -{ label => N("Printer Server"), val => \$ncpserver }, -{ label => N("Print Queue Name"), val => \$ncpqueue }, -{ label => N("User name"), val => \$ncpuser }, -{ label => N("Password"), val => \$ncppassword, hidden => 1 } ], -complete => sub { - unless ($ncpserver ne "") { - $in->ask_warn(N("Error"), N("NCP server name missing!")); - return (1,0); - } - unless ($ncpqueue ne "") { - $in->ask_warn(N("Error"), N("NCP queue name missing!")); - return (1,1); - } - return 0; -} - ); - # Generate the Foomatic URI - $printer->{currentqueue}{connect} = - join '', ("ncp://", ($ncpuser && ($ncpuser . - ($ncppassword && ":$ncppassword") . '@')), - "$ncpserver/$ncpqueue"); - - if (!$::testing && !files_exist('/usr/bin/nprint')) { - $in->do_pkgs->install('ncpfs') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "ncpfs") . " " . - N("Aborting")); - return 0; - }; - } - 1; -} - -sub setup_socket { - my ($printer, $in, $upNetwork) = @_; - - # Check whether the network functionality is configured and - # running - if (!check_network($printer, $in, $upNetwork, 0)) { return 0 }; - -# $in->set_help('setupSocket') if $::isInstall; - - my ($uri, $remotehost, $remoteport); - my $queue = $printer->{OLD_QUEUE}; - if ($printer->{configured}{$queue} && - $printer->{currentqueue}{connect} =~ m!^(socket:|ptal://?hpjd:)!) { - $uri = $printer->{currentqueue}{connect}; - if ($uri =~ m!^ptal:!) { - if ($uri =~ m!^ptal://?hpjd:([^/:]+):([0-9]+)/?\s*$!) { - my $ptalport = $2 - 9100; - ($remotehost, $remoteport) = ($1, $ptalport); - } elsif ($uri =~ m!^ptal://?hpjd:([^/:]+)\s*$!) { - ($remotehost, $remoteport) = ($1, 9100); - } - } else { - ($remotehost, $remoteport) = - $uri =~ m!^\s*socket://([^/:]+):([0-9]+)/?\s*$!; - } - } else { - $remotehost = ""; - $remoteport = "9100"; - } - - my $autodetect = 0; - my @autodetected; - my $menuentries; - my @menuentrieslist; - my $menuchoice = ""; - my $oldmenuchoice = ""; - if ($printer->{AUTODETECT}) { - $autodetect = 1; - my $_w = $in->wait_message(N("Printer auto-detection"), N("Scanning network...")); - @autodetected = printer::detect::net_detect(); - my ($host, $port); - foreach my $p (@autodetected) { - my $menustr; - if ($p->{port} =~ m!^socket://([^:]+):(\d+)$!) { - $host = $1; - $port = $2; - } - if ($p->{val}{DESCRIPTION}) { - $menustr = $p->{val}{DESCRIPTION}; - $menustr .= N(", host \"%s\", port %s", - $host, $port); - } else { - $menustr = N("Host \"%s\", port %s", $host, $port); - } - $menuentries->{$menustr} = $p->{port}; - if ($host eq $remotehost && - $host eq $remotehost) { - $menuchoice = $menustr; - } - } - @menuentrieslist = sort { - $menuentries->{$a} cmp $menuentries->{$b}; - } keys(%$menuentries); - if ($printer->{configured}{$queue} && - $printer->{currentqueue}{connect} =~ m!^(socket:|ptal://?hpjd:)! && - $menuchoice eq "") { - my $menustr; - if ($printer->{currentqueue}{make}) { - $menustr = "$printer->{currentqueue}{make} $printer->{currentqueue}{model}"; - $menustr .= N(", host \"%s\", port %s", - $remotehost, $remoteport); - } else { - $menustr = N("Host \"%s\", port %s", - $remotehost, $remoteport); - } - $menuentries->{$menustr} = "socket://$remotehost:$remoteport"; - unshift(@menuentrieslist, $menustr); - $menuchoice = $menustr; - } - if ($#menuentrieslist < 0) { - $autodetect = 0; - } elsif ($menuchoice eq "") { - $menuchoice = $menuentrieslist[0]; - if ($menuentries->{$menuentrieslist[0]} =~ m!^socket://([^:]+):(\d+)$!) { - $remotehost = $1; - $remoteport = $2; - } - } - $oldmenuchoice = $menuchoice; - } - - return 0 if !$in->ask_from_( - { - title => N("TCP/Socket Printer Options"), - messages => ($autodetect ? - N("Choose one of the auto-detected printers from the list or enter the hostname or IP and the optional port number (default is 9100) in the input fields.") : - N("To print to a TCP or socket printer, you need to provide the host name or IP of the printer and optionally the port number (default is 9100). On HP JetDirect servers the port number is usually 9100, on other servers it can vary. See the manual of your hardware.")), - callbacks => { - complete => sub { - unless ($remotehost ne "") { - $in->ask_warn(N("Error"), N("Printer host name or IP missing!")); - return (1,0); - } - unless ($remoteport =~ /^[0-9]+$/) { - $in->ask_warn(N("Error"), N("The port number should be an integer!")); - return (1,1); - } - return 0; - }, - changed => sub { - return 0 if !$autodetect; - if ($oldmenuchoice ne $menuchoice) { - if ($menuentries->{$menuchoice} =~ m!^socket://([^:]+):(\d+)$!) { - $remotehost = $1; - $remoteport = $2; - } - $oldmenuchoice = $menuchoice; - } - return 0; - } - } - }, - [ - { label => ($autodetect ? "" : N("Printer host name or IP")), - val => \$remotehost }, - { label => ($autodetect ? "" : N("Port")), val => \$remoteport }, - if_($autodetect, - { val => \$menuchoice, list => \@menuentrieslist, - not_edit => 0, format => \&translate, sort => 0, - allow_empty_list => 1, type => 'list' }) - ] - ); - - #- make the Foomatic URI - $printer->{currentqueue}{connect} = - join '', ("socket://$remotehost", $remoteport ? ":$remoteport" : ()); - - #- LPD and LPRng need netcat ('nc') to access to socket printers - if (($printer->{SPOOLER} eq 'lpd' || $printer->{SPOOLER} eq 'lprng') && - !$::testing && !files_exist('/usr/bin/nc')) { - $in->do_pkgs->install('nc') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "nc") . " " . - N("Aborting")); - return 0; - } - } - - # Auto-detect printer model - my $modelinfo; - if ($printer->{AUTODETECT}) { - $modelinfo = printer::detect::getSNMPModel($remotehost); - } - my $auto_hpoj; - if (defined($modelinfo) && - $modelinfo->{MANUFACTURER} ne "" && - $modelinfo->{MODEL} ne "") { - $auto_hpoj = 1; - } else { - $auto_hpoj = 0; - } - - # Do configuration of multi-function devices and look up model name - # in the printer database - setup_common($printer, $in, - "$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}", - $printer->{currentqueue}{connect}, $auto_hpoj, - ({port => $printer->{currentqueue}{connect}, - val => $modelinfo })); - 1; -} - -sub setup_uri { - my ($printer, $in, $upNetwork) = @_; - -# $in->set_help('setupURI') if $::isInstall; - if ($printer->{AUTODETECT} and ($printer->{SPOOLER} eq 'cups')) { - my $_w = $in->wait_message(N("Printerdrake"), - N("Refreshing Device URI list...")); - printer::services::restart("cups"); - } - return if !$in->ask_from(N("Printer Device URI"), -N("You can specify directly the URI to access the printer. The URI must fulfill either the CUPS or the Foomatic specifications. Note that not all URI types are supported by all the spoolers."), [ -{ label => N("Printer Device URI"), -val => \$printer->{currentqueue}{connect}, -list => [ if_($printer->{currentqueue}{connect}, - $printer->{currentqueue}{connect}), - ($printer->{SPOOLER} eq 'cups' ? - printer::cups::lpinfo_v() : - ("parallel:/", - "usb:/", - "serial:/", - "http://", - "ipp://", - "lpd://", - "smb://", - "ncp://", - "socket://", - "ptal:/mlc:", - "ptal:/hpjd:", - "file:/", - 'postpipe:""')), - ], not_edit => 0, sort => 0 }, ], -complete => sub { - unless ($printer->{currentqueue}{connect} =~ /[^:]+:.+/) { - $in->ask_warn(N("Error"), N("A valid URI must be entered!")); - return (1,0); - } - return 0; -} - ); - - # Non-local printer, check network and abort if no network available - if ($printer->{currentqueue}{connect} !~ m!^(file|parallel|usb|serial|mtink|ptal://?mlc):/! && - !check_network($printer, $in, $upNetwork, 0)) { - return 0; - # If the chosen protocol needs additional software, install it. - } elsif ($printer->{currentqueue}{connect} =~ /^lpd:/ && - $printer->{SPOOLER} eq 'lpd' && - !$::testing && !files_exist('/usr/bin/rlpr')) { - # LPD does not support filtered queues to a remote LPD server by itself - # It needs an additional program as "rlpr" - $in->do_pkgs->install('rlpr') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "rlpr") . " " . - N("Aborting")); - return 0; - }; - } elsif ($printer->{currentqueue}{connect} =~ /^smb:/ && - !$::testing && !files_exist('/usr/bin/smbclient')) { - $in->do_pkgs->install('samba-client') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "Samba client") . " " . - N("Aborting")); - return 0; - }; - } elsif ($printer->{currentqueue}{connect} =~ /^ncp:/ && - !$::testing && !files_exist('/usr/bin/nprint')) { - $in->do_pkgs->install('ncpfs') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "ncpfs") . " " . - N("Aborting")); - return 0; - }; - } elsif ($printer->{currentqueue}{connect} =~ /^socket:/ && - #- LPD and LPRng need netcat ('nc') to access to socket printers - ($printer->{SPOOLER} eq 'lpd' || $printer->{SPOOLER} eq 'lprng') && - !$::testing && !files_exist('/usr/bin/nc')) { - $in->do_pkgs->install('nc') or do { - $in->ask_warn(N("Error"), - N("Could not install the %s packages!", - "nc") . " " . - N("Aborting")); - return 0; - }; - } - - if ($printer->{currentqueue}{connect} =~ m!^socket://([^:/]+)! || - $printer->{currentqueue}{connect} =~ m!^lpd://([^:/]+)! || - $printer->{currentqueue}{connect} =~ m!^http://([^:/]+)! || - $printer->{currentqueue}{connect} =~ m!^ipp://([^:/]+)!) { - - # Auto-detect printer model (works if host is an ethernet-connected - # printer) - my $remotehost = $1; - my $modelinfo = printer::detect::getSNMPModel($remotehost); - my $auto_hpoj; - if (defined($modelinfo) && - $modelinfo->{MANUFACTURER} ne "" && - $modelinfo->{MODEL} ne "") { - $in->ask_warn(N("Information"), N("Detected model: %s %s", - $modelinfo->{MANUFACTURER}, - $modelinfo->{MODEL})); - $auto_hpoj = 1; - } else { - $auto_hpoj = 0; - } - - # Do configuration of multi-function devices and look up model name - # in the printer database - setup_common($printer, $in, - "$modelinfo->{MANUFACTURER} $modelinfo->{MODEL}", - $printer->{currentqueue}{connect}, $auto_hpoj, - ({port => $printer->{currentqueue}{connect}, - val => $modelinfo })); - } - - 1; -} - -sub setup_postpipe { - my ($printer, $in) = @_; - -# $in->set_help('setupPostpipe') if $::isInstall; - my $uri; - my $commandline; - my $queue = $printer->{OLD_QUEUE}; - if ($printer->{configured}{$queue} && - $printer->{currentqueue}{connect} =~ m/^postpipe:/) { - $uri = $printer->{currentqueue}{connect}; - $commandline = $1 if $uri =~ m!^\s*postpipe:"(.*)"$!; - } else { - $commandline = ""; - } - - return if !$in->ask_from(N("Pipe into command"), -N("Here you can specify any arbitrary command line into which the job should be piped instead of being sent directly to a printer."), [ -{ label => N("Command line"), -val => \$commandline }, ], -complete => sub { - unless ($commandline ne "") { - $in->ask_warn(N("Error"), N("A command line must be entered!")); - return (1,0); - } - return 0; -} -); - - #- make the Foomatic URI - $printer->{currentqueue}{connect} = "postpipe:$commandline"; - - 1; -} - -sub setup_common { - - my ($printer, $in, $makemodel, $device, $do_auto_detect, @autodetected) = @_; - - #- Check whether the printer is an HP multi-function device and - #- configure HPOJ if it is one - - my $ptaldevice = ""; - my $isHPOJ = 0; - my $w; - if ($device =~ m!^/dev/! || $device =~ m!^socket://!) { - # Ask user whether he has a multi-function device when he didn't - # do auto-detection or when auto-detection failed - my $searchunknown = N("Unknown model"); - if (!$do_auto_detect || - $makemodel eq $searchunknown || - $makemodel =~ /^\s*$/) { - local $::isWizard = 0; - if (!$printer->{noninteractive}) { - $isHPOJ = $in->ask_yesorno(N("Add a new printer"), - N("Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3200/3300 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"), 0); - } - } - if ($makemodel =~ /HP\s+(OfficeJet|PSC|PhotoSmart|LaserJet\s+(1200|1220|2200|3200|33.0)|(DeskJet|dj)\s*450)/i || - $makemodel =~ /Sony\s+IJP[\s\-]+V[\s\-]+100/i || - $isHPOJ) { - # Install HPOJ package - my $hpojinstallfailed = 0; - if (!$::testing && - !files_exist(qw(/usr/sbin/ptal-mlcd - /usr/sbin/ptal-init - /usr/bin/xojpanel - /usr/sbin/lsusb))) { - $w = $in->wait_message(N("Printerdrake"), - N("Installing HPOJ package...")) - if !$printer->{noninteractive}; - $in->do_pkgs->install('hpoj', 'xojpanel', 'usbutils') - or do { - $in->ask_warn(N("Warning"), - N("Could not install the %s packages!", - "HPOJ") . " " . - N("Only printing will be possible on the %s.", - $makemodel)); - $hpojinstallfailed = 1; - }; - } - # Configure and start HPOJ - undef $w; - $w = $in->wait_message - (N("Printerdrake"), - N("Checking device and configuring HPOJ...")) - if !$printer->{noninteractive}; - - eval {$ptaldevice = printer::main::configure_hpoj - ($device, @autodetected) if !$hpojinstallfailed;}; - - if (my $err = $@) { - warn qq(HPOJ conf faillure: "$err"); - log::l(qq(HPOJ conf faillure: "$err")); - } - - if ($ptaldevice) { - # HPOJ has determined the device name, make use of it if we - # didn't know it before - if (!$do_auto_detect || - !$makemodel || - $makemodel eq $searchunknown || - $makemodel =~ /^\s*$/) { - $makemodel = $ptaldevice; - $makemodel =~ s/^.*:([^:]+)$/$1/; - $makemodel =~ s/_/ /g; - if ($makemodel =~ /^\s*IJP/i) { - $makemodel = "Sony $makemodel"; - } else { - $makemodel = "HP $makemodel"; - } - } - # Configure scanning with SANE on the MF device - if ($makemodel !~ /HP\s+PhotoSmart/i && - $makemodel !~ /HP\s+LaserJet\s+2200/i && - $makemodel !~ /HP\s+(DeskJet|dj)\s*450/i) { - # Install SANE - if (!$::testing && - (!files_exist(qw(/usr/bin/scanimage - /usr/bin/xscanimage - /etc/sane.d/dll.conf - /usr/lib/libsane-hpoj.so.1)) || - (!files_exist(qw(/usr/bin/xsane)) && - !files_exist(qw(/usr/bin/kooka)) && - !$in->do_pkgs->is_installed('scanner-gui')))) { - undef $w; - $w = $in->wait_message - (N("Printerdrake"), - N("Installing SANE packages...")) - if !$printer->{noninteractive}; - $in->do_pkgs->install('sane-backends', - 'sane-frontends', - 'scanner-gui', - 'libsane-hpoj1') - or do { - $in->ask_warn(N("Warning"), - N("Could not install the %s packages!", - "SANE") . " " . - N("Scanning on the %s will not be possible.", - $makemodel)); - }; - } - # Configure the HPOJ SANE backend - printer::main::config_sane(); - } - # Configure photo card access with mtools and MToolsFM - if (($makemodel =~ /HP\s+PhotoSmart/i || - $makemodel =~ /HP\s+PSC\s*9[05]0/i || - $makemodel =~ /HP\s+PSC\s*135\d/i || - $makemodel =~ /HP\s+PSC\s*21[57]\d/i || - $makemodel =~ /HP\s+PSC\s*22\d\d/i || - $makemodel =~ /HP\s+PSC\s*2[45]\d\d/i || - $makemodel =~ /HP\s+OfficeJet\s+D\s*1[45]5/i || - $makemodel =~ /HP\s+OfficeJet\s+71[34]0/i || - $makemodel =~ /HP\s+(DeskJet|dj)\s*450/i) && - $makemodel !~ /HP\s+PhotoSmart\s+7150/i) { - # Install mtools and MToolsFM - if (!$::testing && - !files_exist(qw(/usr/bin/mdir - /usr/bin/mcopy - /usr/bin/MToolsFM - ))) { - undef $w; - $w = $in->wait_message - (N("Printerdrake"), - N("Installing mtools packages...")) - if !$printer->{noninteractive}; - $in->do_pkgs->install('mtools', 'mtoolsfm') - or do { - $in->ask_warn(N("Warning"), - N("Could not install the %s packages!", - "Mtools") . " " . - N("Photo memory card access on the %s will not be possible.", - $makemodel)); - }; - } - # Configure mtools/MToolsFM for photo card access - printer::main::config_photocard(); - } - - if (!$printer->{noninteractive}) { - my $text = ""; - # Inform user about how to scan with his MF device - $text = scanner_help($makemodel, "ptal://$ptaldevice"); - if ($text) { - undef $w; - $in->ask_warn - (N("Scanning on your HP multi-function device"), - $text); - } - # Inform user about how to access photo cards with his - # MF device - $text = photocard_help($makemodel, "ptal://$ptaldevice"); - if ($text) { - undef $w; - $in->ask_warn(N("Photo memory card access on your HP multi-function device"), - $text); - } - } - # make the DeviceURI from $ptaldevice. - $printer->{currentqueue}{connect} = "ptal://" . $ptaldevice; - } else { - # make the DeviceURI from $device. - $printer->{currentqueue}{connect} = $device; - } - $w = $in->wait_message - (N("Printerdrake"), - N("Checking device and configuring HPOJ...")) - if !$printer->{noninteractive} && !defined($w); - } else { - # make the DeviceURI from $device. - $printer->{currentqueue}{connect} = $device; - } - } else { - # make the DeviceURI from $device. - $printer->{currentqueue}{connect} = $device; - } - - if ($printer->{currentqueue}{connect} !~ /:/) { - if ($printer->{currentqueue}{connect} =~ /usb/) { - $printer->{currentqueue}{connect} = - "usb:" . $printer->{currentqueue}{connect}; - } elsif ($printer->{currentqueue}{connect} =~ /(serial|tty)/) { - $printer->{currentqueue}{connect} = - "serial:" . $printer->{currentqueue}{connect}; - } elsif ($printer->{currentqueue}{connect} =~ - /(printers|parallel|parport|lp\d)/) { - $printer->{currentqueue}{connect} = - "parallel:" . $printer->{currentqueue}{connect}; - } else { - $printer->{currentqueue}{connect} = - "file:" . $printer->{currentqueue}{connect}; - } - } - - #- if CUPS is the spooler, make sure that CUPS knows the device - if ($printer->{SPOOLER} eq "cups" && - $device !~ /^lpd:/ && - $device !~ /^smb:/ && - $device !~ /^socket:/ && - $device !~ /^http:/ && - $device !~ /^ipp:/) { - my $_w = $in->wait_message - (N("Printerdrake"), - N("Making printer port available for CUPS...")) - if !$printer->{noninteractive}; - printer::main::assure_device_is_available_for_cups($ptaldevice || - $device); - } - - #- Read the printer driver database if necessary - if (keys %printer::main::thedb == 0) { - my $_w = $in->wait_message - (N("Printerdrake"), N("Reading printer database...")) - if !$printer->{noninteractive}; - printer::main::read_printer_db($printer, $printer->{SPOOLER}); - } - - #- Search the database entry which matches the detected printer best - my $descr = ""; - foreach (@autodetected) { - $device eq $_->{port} or next; - my ($automake, $automodel, $autodescr, $autocmdset, $autosku) = - ($_->{val}{MANUFACTURER}, $_->{val}{MODEL}, - $_->{val}{DESCRIPTION}, $_->{val}{'COMMAND SET'}, - $_->{val}{SKU}); - # Clean some manufacturer's names - my $descrmake = printer::main::clean_manufacturer_name($automake); - if ($automake && $autosku) { - $descr = "$descrmake|$autosku"; - } elsif ($automake && $automodel) { - $descr = "$descrmake|$automodel"; - } elsif ($autodescr) { - $descr = $autodescr; - $descr =~ s/ /|/; - } elsif ($automodel) { - $descr = $automodel; - $descr =~ s/ /|/; - } elsif ($automake) { - $descr = "$descrmake|"; - } - # Remove manufacturer's name from the beginning of the - # description (do not do this with manufacturer names which - # contain odd characters) - $descr =~ s/^$descrmake\|\s*$descrmake\s*/$descrmake|/i - if $descrmake && - $descrmake !~ m![\\/\(\)\[\]\|\.\$\@\%\*\?]!; - # Clean up the description from noise which makes the best match - # difficult - $descr =~ s/\s+[Ss]eries//i; - $descr =~ s/\s+\(?[Pp]rinter\)?$//i; - $printer->{DBENTRY} = ""; - # Try to find an exact match, check both whether the detected - # make|model is in the make|model of the database entry and vice versa - # If there is more than one matching database entry, the longest match - # counts. - my $matchlength = -100; - foreach my $entry (keys %printer::main::thedb) { - # Try to match the device ID string of the auto-detection - if ($printer::main::thedb{$entry}{make} =~ /Generic/i) { - # Database entry for generic printer, check printer - # languages (command set) - my $_cmd = $printer::main::thedb{$entry}{devidcmd}; - if ($printer::main::thedb{$entry}{model} =~ - m!PCL\s*5/5e!i) { - # Generic PCL 5/5e Printer - if ($autocmdset =~ - /(^|[:,])PCL\s*\-*\s*(5|)([,;]|$)/i) { - if ($matchlength < -50) { - $matchlength = -50; - $printer->{DBENTRY} = $entry; - next; - } - } - } elsif ($printer::main::thedb{$entry}{model} =~ - m!PCL\s*(6|XL)!i) { - # Generic PCL 6/XL Printer - if ($autocmdset =~ - /(^|[:,])PCL\s*\-*\s*(6|XL)([,;]|$)/i) { - if ($matchlength < -40) { - $matchlength = -40; - $printer->{DBENTRY} = $entry; - next; - } - } - } elsif ($printer::main::thedb{$entry}{model} =~ - m!(PostScript)!i) { - # Generic PostScript Printer - if ($autocmdset =~ - /(^|[:,])(PS|POSTSCRIPT)[^:;,]*([,;]|$)/i) { - if ($matchlength < -10) { - $matchlength = -10; - $printer->{DBENTRY} = $entry; - next; - } - } - } - } else { - # "Real" manufacturer, check manufacturer, model, and/or - # description - my $matched = 1; - my ($mfg, $mdl, $des); - if ($mfg = $printer::main::thedb{$entry}{devidmake}) { - $mfg =~ s/Hewlett[-\s_]Packard/HP/i; - if (uc($mfg) ne uc($automake)) { - $matched = 0; - } - } - if ($mdl = $printer::main::thedb{$entry}{devidmodel}) { - if ($mdl ne $automodel) { - $matched = 0; - } - } - if ($des = $printer::main::thedb{$entry}{deviddesc}) { - $des =~ s/Hewlett[-\s_]Packard/HP/; - $des =~ s/HEWLETT[-\s_]PACKARD/HP/; - if ($des ne $autodescr) { - $matched = 0; - } - } - if ($matched && ($des || $mfg && $mdl)) { - # Full match to known auto-detection data - $printer->{DBENTRY} = $entry; - $matchlength = 1000; - last; - } - } - # Do not search human-readable make and model names if we had an - # exact match or a match to the auto-detection ID string - next if $matchlength >= 100; - # Try to match the (human-readable) make and model of the - # Foomatic database or of thr PPD file - my $dbmakemodel; - if ($printer->{expert}) { - $dbmakemodel = $1 if $entry =~ m/^(.*)\|[^\|]*$/; - } else { - $dbmakemodel = $entry; - } - # Don't try to match if the database entry does not provide - # make and model - next unless $dbmakemodel; - # If make and model match exactly, we have found the correct - # entry and we can stop searching human-readable makes and - # models - if (lc($dbmakemodel) eq lc($descr)) { - $printer->{DBENTRY} = $entry; - $matchlength = 100; - next; - } - # Matching a part of the human-readable makes and models - # should only be done if the search term is not the name of - # an old model, otherwise the newest, not yet listed models - # match with the oldest model of the manufacturer (as the - # Epson Stylus Photo 900 with the original Epson Stylus Photo) - my @badsearchterms = - ("HP|DeskJet", - "HP|LaserJet", - "HP|DesignJet", - "HP|OfficeJet", - "HP|PhotoSmart", - "EPSON|Stylus", - "EPSON|Stylus Color", - "EPSON|Stylus Photo", - "EPSON|Stylus Pro", - "XEROX|WorkCentre", - "XEROX|DocuPrint"); - if (!member($descr, @badsearchterms)) { - my $searchterm = $descr; - my $lsearchterm = length($searchterm); - $searchterm =~ s!([\\/\(\)\[\]\|\.\$\@\%\*\?])!\\$1!g; - if ($lsearchterm > $matchlength && - $dbmakemodel =~ m!$searchterm!i) { - $matchlength = $lsearchterm; - $printer->{DBENTRY} = $entry; - } - } - if (!member($dbmakemodel, @badsearchterms)) { - my $searchterm = $dbmakemodel; - my $lsearchterm = length($searchterm); - $searchterm =~ s!([\\/\(\)\[\]\|\.\$\@\%\*\?])!\\$1!g; - if ($lsearchterm > $matchlength && - $descr =~ m!$searchterm!i) { - $matchlength = $lsearchterm; - $printer->{DBENTRY} = $entry; - } - } - } - # No matching printer found, try a best match as last mean (not - # when generating queues non-interactively) - if (!$printer->{noninteractive}) { - $printer->{DBENTRY} ||= - bestMatchSentence($descr, keys %printer::main::thedb); - # If the manufacturer was not guessed correctly, discard the - # guess. - my $guessedmake = lc($1) if $printer->{DBENTRY} =~ /^([^\|]+)\|/; - if ($guessedmake !~ /Generic/i && - $descr !~ /$guessedmake/i && - ($guessedmake ne "hp" || - $descr !~ /Hewlett[\s-]+Packard/i)) - { $printer->{DBENTRY} = "" }; - } - } - - #- Pre-fill the "Description" field with the printer's model name - if (!$printer->{currentqueue}{desc} && $descr) { - $printer->{currentqueue}{desc} = $descr; - $printer->{currentqueue}{desc} =~ s/\|/ /g; - } - - #- When we have chosen a printer here, the question whether the - #- automatically chosen model from the database is correct, should - #- have "This model is correct" as default answer - delete($printer->{MANUALMODEL}); - - 1; -} - -sub choose_printer_name { - my ($printer, $in) = @_; - # Name, description, location -# $in->set_help('setupPrinterName') if $::isInstall; - my $default = $printer->{currentqueue}{queue}; - $in->ask_from_( - { title => N("Enter Printer Name and Comments"), - #cancel => !$printer->{configured}{$queue} ? '' : N("Remove queue"), - callbacks => { complete => sub { - unless ($printer->{currentqueue}{queue} =~ /^\w+$/) { - $in->ask_warn(N("Error"), N("Name of printer should contain only letters, numbers and the underscore")); - return (1,0); - } - local $::isWizard = 0; - if ($printer->{configured}{$printer->{currentqueue}{queue}} - && $printer->{currentqueue}{queue} ne $default && - !$in->ask_yesorno(N("Warning"), N("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?", - $printer->{currentqueue}{queue}), - 0)) { - return (1,0); # Let the user correct the name - } - return 0; - }, - }, - messages => -N("Every printer needs a name (for example \"printer\"). The Description and Location fields do not need to be filled in. They are comments for the users.") }, - [ { label => N("Name of printer"), val => \$printer->{currentqueue}{queue} }, - { label => N("Description"), val => \$printer->{currentqueue}{desc} }, - { label => N("Location"), val => \$printer->{currentqueue}{loc} }, - ]) or return 0; - - $printer->{QUEUE} = $printer->{currentqueue}{queue}; - 1; -} - -sub get_db_entry { - my ($printer, $in) = @_; - #- Read the printer driver database if necessary - if (keys %printer::main::thedb == 0) { - my $_w = $in->wait_message(N("Printerdrake"), - N("Reading printer database...")) - if $printer->{noninteractive}; - printer::main::read_printer_db($printer, $printer->{SPOOLER}); - } - my $_w = $in->wait_message(N("Printerdrake"), - N("Preparing printer database...")) - if !$printer->{noninteractive}; - my $queue = $printer->{OLD_QUEUE}; - if ($printer->{configured}{$queue}) { - # The queue was already configured - if ($printer->{configured}{$queue}{queuedata}{foomatic}) { - # The queue was configured with Foomatic - my $driverstr; - if ($printer->{configured}{$queue}{queuedata}{driver} eq "Postscript") { - $driverstr = "PostScript"; - } else { - $driverstr = "GhostScript + $printer->{configured}{$queue}{queuedata}{driver}"; - } - my $make = uc($printer->{configured}{$queue}{queuedata}{make}); - my $model = $printer->{configured}{$queue}{queuedata}{model}; - if ($printer->{expert}) { - $printer->{DBENTRY} = "$make|$model|$driverstr"; - # database key contains the "(recommended)" for the - # recommended driver, so add it if necessary - if (!member($printer->{DBENTRY}, - keys(%printer::main::thedb))) { - $printer->{DBENTRY} .= " (recommended)"; - } - } else { - $printer->{DBENTRY} = "$make|$model"; - } - $printer->{OLD_CHOICE} = $printer->{DBENTRY}; - } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) { - # Do we have a native CUPS driver or a PostScript PPD file? - $printer->{DBENTRY} = - printer::main::get_descr_from_ppd($printer) || - $printer->{DBENTRY}; - if (!member($printer->{DBENTRY}, - keys(%printer::main::thedb))) { - $printer->{DBENTRY} .= " (recommended)"; - } - $printer->{OLD_CHOICE} = $printer->{DBENTRY}; - } - my ($make, $model); - if ($printer->{DBENTRY} eq "") { - # Point the list cursor at least to manufacturer and model of - # the printer - $printer->{DBENTRY} = ""; - if ($printer->{configured}{$queue}{queuedata}{foomatic}) { - $make = uc($printer->{configured}{$queue}{queuedata}{make}); - $model = $printer->{configured}{$queue}{queuedata}{model}; - } elsif ($printer->{configured}{$queue}{queuedata}{ppd}) { - my $makemodel = - printer::main::get_descr_from_ppd($printer); - if ($makemodel =~ m!^([^\|]+)\|([^\|]+)(|\|.*)$!) { - $make = $1; - $model = $2; - } - } - foreach my $key (keys %printer::main::thedb) { - if ($printer->{expert} && - $key =~ /^$make\|$model\|.*\(recommended\)$/ || - !$printer->{expert} && $key =~ /^$make\|$model$/) { - $printer->{DBENTRY} = $key; - } - } - } - if ($printer->{DBENTRY} eq "") { - # Exact match of make and model did not work, try to clean - # up the model name - $model =~ s/PS//; - $model =~ s/PostScript//i; - $model =~ s/Series//i; - foreach my $key (keys %printer::main::thedb) { - if ($printer->{expert} && $key =~ /^$make\|$model\|.*\(recommended\)$/ || - !$printer->{expert} && $key =~ /^$make\|$model$/) { - $printer->{DBENTRY} = $key; - } - } - } - if ($printer->{DBENTRY} eq "" && $make ne "") { - # Exact match with cleaned-up model did not work, try a best match - my $matchstr = "$make|$model"; - $printer->{DBENTRY} = - bestMatchSentence($matchstr, keys %printer::main::thedb); - # If the manufacturer was not guessed correctly, discard the - # guess. - my $guessedmake = lc($1) if $printer->{DBENTRY} =~ /^([^\|]+)\|/; - if ($matchstr !~ /$guessedmake/i && - ($guessedmake ne "hp" || - $matchstr !~ /Hewlett[\s-]+Packard/i)) - { $printer->{DBENTRY} = "" }; - } - if ($printer->{DBENTRY} eq "") { - # Set the OLD_CHOICE to a non-existing value - $printer->{OLD_CHOICE} = "XXX"; - } - } else { - if ($printer->{expert} && $printer->{DBENTRY} !~ /(recommended)/) { - my ($make, $model) = $printer->{DBENTRY} =~ /^([^\|]+)\|([^\|]+)\|/; - foreach my $key (keys %printer::main::thedb) { - if ($key =~ /^$make\|$model\|.*\(recommended\)$/) { - $printer->{DBENTRY} = $key; - } - } - } - $printer->{OLD_CHOICE} = $printer->{DBENTRY}; - } - 1; -} - -sub is_model_correct { - my ($printer, $in) = @_; -# $in->set_help('chooseModel') if $::isInstall; - my $dbentry = $printer->{DBENTRY}; - if (!$dbentry) { - # If printerdrake could not determine the model, omit this dialog and - # let the user choose manually. - $printer->{MANUALMODEL} = 1; - return 1; - } - $dbentry =~ s/\|/ /g; - my $res = $in->ask_from_list_( - N("Your printer model"), - N("Printerdrake has compared the model name resulting from the printer auto-detection with the models listed in its printer database to find the best match. This choice can be wrong, especially when your printer is not listed at all in the database. So check whether the choice is correct and click \"The model is correct\" if so and if not, click \"Select model manually\" so that you can choose your printer model manually on the next screen. - -For your printer Printerdrake has found: - -%s", $dbentry), - [N("The model is correct"), - N("Select model manually")], - ($printer->{MANUALMODEL} ? N("Select model manually") : - N("The model is correct"))); - return 0 if !$res; - $printer->{MANUALMODEL} = $res eq N("Select model manually"); - 1; -} - -sub choose_model { - my ($printer, $in) = @_; -# $in->set_help('chooseModel') if $::isInstall; - #- Read the printer driver database if necessary - if (keys %printer::main::thedb == 0) { - my $_w = $in->wait_message(N("Printerdrake"), - N("Reading printer database...")); - printer::main::read_printer_db($printer, $printer->{SPOOLER}); - } - if (!member($printer->{DBENTRY}, keys(%printer::main::thedb))) { - $printer->{DBENTRY} = N("Raw printer (No driver)"); - } - # Choose the printer/driver from the list - my $choice = $printer->{DBENTRY}; - my $loadppdchosen = 0; - while (1) { - if ($in->ask_from_({ - title => N("Printer model selection"), - messages => N("Which printer model do you have?") . - N(" - -Please check whether Printerdrake did the auto-detection of your printer model correctly. Find the correct model in the list when a wrong model or \"Raw printer\" is highlighted.") - . " " . - N("If your printer is not listed, choose a compatible (see printer manual) or a similar one."), - #cancel => (""), - #ok => (""), - }, [ - # List the printers/drivers - { val => \$choice, format => \&translate, - sort => 1, separator => "|", tree_expanded => 0, - quit_if_double_click => 1, allow_empty_list => 1, - list => [ keys %printer::main::thedb ] }, - # Button to install a manufacturer-supplied PPD file - { clicked_may_quit => - sub { - $loadppdchosen = 1; - 1; - }, - val => N("Install a manufacturer-supplied PPD file") }, - ])) { - $printer->{DBENTRY} = $choice if !$loadppdchosen; - } else { - return 0; - } - last if !$loadppdchosen; - # Install a manufacturer-supplied PPD file - my $ppdentry; - if ($ppdentry = installppd($printer, $in)) { - $choice = $ppdentry; - } - $loadppdchosen = 0; - } - return 1; -} - -sub installppd { - my ($printer, $in) = @_; - - # Install a manufacturer-supplied PPD file - - # The dialogs to choose the PPD file should appear as extra - # windows and not embedded in the "Add printer" wizard. - local $::isWizard = 0; - - my $ppdfile; - my ($mediachoice); - while (1) { - # Tell user about PPD file installation - $in->ask_from('Printerdrake', - N("Every PostScript printer is delivered with a PPD file which describes the printer's options and features.") . " " . - N("This file is usually somewhere on the CD with the Windows and Mac drivers delivered with the printer.") . " " . - N("You can find the PPD files also on the manufacturer's web sites.") . " " . - N("If you have Windows installed on your machine, you can find the PPD file on your Windows partition, too.") . "\n" . - N("Installing the printer's PPD file and using it when setting up the printer makes all options of the printer available which are provided by the printer's hardware") . "\n" . - N("Here you can choose the PPD file to be installed on your machine, it will then be used for the setup of your printer."), - [ - { label => N("Install PPD file from"), - val => \$mediachoice, - list => [N("CD-ROM"), - N("Floppy Disk"), - N("Other place")], - not_edit => 1, sort => 0 }, - ], - ) or return 0; - my $dir; - if ($mediachoice eq N("CD-ROM")) { - $dir = "/mnt/cdrom"; - } elsif ($mediachoice eq N("Floppy Disk")) { - $dir = "/mnt/floppy"; - } elsif ($mediachoice eq N("Other place")) { - $dir = "/mnt"; - } else { - return 0; - } - # Let user select a PPD file from a floppy, hard disk, ... - $ppdfile = $in->ask_file(N("Select PPD file"), "$dir"); - last if !$ppdfile; - if (! -r $ppdfile) { - $in->ask_warn(N("Error"), - N("The PPD file %s does not exist or is unreadable!", - $ppdfile)); - next; - } - if (! printer::main::checkppd($printer, $ppdfile)) { - $in->ask_warn(N("Error"), - N("The PPD file %s does not conform with the PPD specifications!", - $ppdfile)); - next; - } - last; - } - - return 0 if !$ppdfile; - - # Install the PPD file in /usr/share/cups/ppd/printerdrake/ - my $_w = $in->wait_message(N("Printerdrake"), - N("Installing PPD file...")); - my $ppdentry = printer::main::installppd($printer, $ppdfile); - undef $_w; - return $ppdentry; -} - -my %lexmarkinkjet_options = ( - 'parallel:/dev/lp0' => " -o Port=ParPort1", - 'parallel:/dev/lp1' => " -o Port=ParPort2", - 'parallel:/dev/lp2' => " -o Port=ParPort3", - 'usb:/dev/usb/lp0' => " -o Port=USB1", - 'usb:/dev/usb/lp1' => " -o Port=USB2", - 'usb:/dev/usb/lp2' => " -o Port=USB3", - 'file:/dev/lp0' => " -o Port=ParPort1", - 'file:/dev/lp1' => " -o Port=ParPort2", - 'file:/dev/lp2' => " -o Port=ParPort3", - 'file:/dev/usb/lp0' => " -o Port=USB1", - 'file:/dev/usb/lp1' => " -o Port=USB2", - 'file:/dev/usb/lp2' => " -o Port=USB3", - ); - -my %drv_x125_options = ( - 'usb:/dev/usb/lp0' => " -o Device=usb_lp1", - 'usb:/dev/usb/lp1' => " -o Device=usb_lp2", - 'usb:/dev/usb/lp2' => " -o Device=usb_lp3", - 'usb:/dev/usb/lp3' => " -o Device=usb_lp3", - 'file:/dev/usb/lp0' => " -o Device=usb_lp1", - 'file:/dev/usb/lp1' => " -o Device=usb_lp2", - 'file:/dev/usb/lp2' => " -o Device=usb_lp3", - 'file:/dev/usb/lp3' => " -o Device=usb_lp3", - ); - -sub get_printer_info { - my ($printer, $in) = @_; - my $queue = $printer->{OLD_QUEUE}; - my $oldchoice = $printer->{OLD_CHOICE}; - my $newdriver = 0; - if (!$printer->{configured}{$queue} || # New queue or - ($oldchoice && $printer->{DBENTRY} && # make/model/driver changed - ($oldchoice ne $printer->{DBENTRY} || - $printer->{currentqueue}{driver} ne - $printer::main::thedb{$printer->{DBENTRY}}{driver}))) { - delete($printer->{currentqueue}{printer}); - delete($printer->{currentqueue}{ppd}); - $printer->{currentqueue}{foomatic} = 0; - # Read info from printer database - foreach (qw(printer ppd driver make model)) { #- copy some parameter, shorter that way... - $printer->{currentqueue}{$_} = $printer::main::thedb{$printer->{DBENTRY}}{$_}; - } - $newdriver = 1; - } - # Use the "printer" and not the "foomatic" field to identify a Foomatic - # queue because in a new queue "foomatic" is not set yet. - if ($printer->{currentqueue}{printer} || # We have a Foomatic queue - $printer->{currentqueue}{ppd}) { # We have a PPD queue - if ($printer->{currentqueue}{printer}) { # Foomatic queue? - # In case of a new queue "foomatic" was not set yet - $printer->{currentqueue}{foomatic} = 1; - $printer->{currentqueue}{ppd} = undef; - } elsif ($printer->{currentqueue}{ppd}) { # PPD queue? - # If we had a Foomatic queue before, unmark the flag and - # initialize the "printer" and "driver" fields - $printer->{currentqueue}{foomatic} = 0; - $printer->{currentqueue}{printer} = undef; - $printer->{currentqueue}{driver} = "PPD"; - } - # Now get the options for this printer/driver combo - if ($printer->{configured}{$queue} && - ($printer->{configured}{$queue}{queuedata}{foomatic} || - $printer->{configured}{$queue}{queuedata}{ppd})) { - if (!$newdriver) { - # The user didn't change the printer/driver - $printer->{ARGS} = $printer->{configured}{$queue}{args}; - } elsif ($printer->{currentqueue}{foomatic}) { - # The queue was already configured with Foomatic ... - # ... and the user has chosen another printer/driver - $printer->{ARGS} = - printer::main::read_foomatic_options($printer); - } elsif ($printer->{currentqueue}{ppd}) { - # ... and the user has chosen another printer/driver - $printer->{ARGS} = - printer::main::read_ppd_options($printer); - } - } else { - # The queue was not configured with Foomatic before - # Set some special options - $printer->{SPECIAL_OPTIONS} = ''; - # Default page size depending on the country/language - # (US/Canada -> Letter, Others -> A4) - my $pagesize; - if ($printer->{PAPERSIZE}) { - $printer->{SPECIAL_OPTIONS} .= - " -o PageSize=$printer->{PAPERSIZE}"; - } elsif (($pagesize = $in->{lang}) || - ($pagesize = $ENV{LC_PAPER}) || - ($pagesize = $ENV{LANG}) || - ($pagesize = $ENV{LANGUAGE}) || - ($pagesize = $ENV{LC_ALL})) { - if ($pagesize =~ /^en_CA/ || - $pagesize =~ /^fr_CA/ || - $pagesize =~ /^en_US/) { - $pagesize = "Letter"; - } else { - $pagesize = "A4"; - } - $printer->{SPECIAL_OPTIONS} .= - " -o PageSize=$pagesize"; - } - # oki4w driver -> OKI winprinter which needs the - # oki4daemon to work - if ($printer->{currentqueue}{driver} eq 'oki4w') { - if ($printer->{currentqueue}{connect} !~ - m!^(parallel|file):/dev/lp0$!) { - $in->ask_warn(N("OKI winprinter configuration"), - N("You are configuring an OKI laser winprinter. These printers\nuse a very special communication protocol and therefore they work only when connected to the first parallel port. When your printer is connected to another port or to a print server box please connect the printer to the first parallel port before you print a test page. Otherwise the printer will not work. Your connection type setting will be ignored by the driver.")); - } - $printer->{currentqueue}{connect} = 'file:/dev/null'; - # Start the oki4daemon - services::start_service_on_boot('oki4daemon'); - printer::services::start('oki4daemon'); - # Set permissions - - my $h = { - cups => sub { set_permissions('/dev/oki4drv', '660', - 'lp', 'sys') }, - pdq => sub { set_permissions('/dev/oki4drv', '666') } - }; - my $s = $h->{$printer->{SPOOLER}} ||= - sub { set_permissions('/dev/oki4drv', '660', - 'lp', 'lp') }; - &$s; - } elsif ($printer->{currentqueue}{driver} eq 'lexmarkinkjet') { - # Set "Port" option - my $opt = - $lexmarkinkjet_options{$printer->{currentqueue}{connect}}; - if ($opt) { - $printer->{SPECIAL_OPTIONS} .= $opt; - } else { - $in->ask_warn(N("Lexmark inkjet configuration"), - N("The inkjet printer drivers provided by Lexmark only support local printers, no printers on remote machines or print server boxes. Please connect your printer to a local port or configure it on the machine where it is connected to.")); - return 0; - } - # Set device permissions - if ($printer->{currentqueue}{connect} =~ - /^\s*(file|parallel|usb):(\S*)\s*$/) { - if ($printer->{SPOOLER} eq 'cups') { - set_permissions($2, '660', 'lp', 'sys'); - } elsif ($printer->{SPOOLER} eq 'pdq') { - set_permissions($2, '666'); - } else { - set_permissions($2, '660', 'lp', 'lp'); - } - } - # This is needed to have the device not blocked by the - # spooler backend. - $printer->{currentqueue}{connect} = 'file:/dev/null'; - #install packages - my $drivertype = $printer->{currentqueue}{model}; - if ($drivertype eq 'Z22') { $drivertype = 'Z32' } - if ($drivertype eq 'Z23') { $drivertype = 'Z33' } - $drivertype = lc($drivertype); - if (!files_exist("/usr/local/lexmark/$drivertype/$drivertype")) { - eval { $in->do_pkgs->install("lexmark-drivers-$drivertype") }; - } - if (!files_exist("/usr/local/lexmark/$drivertype/$drivertype")) { - # Driver installation failed, probably we do not have - # the commercial CDs - $in->ask_warn(N("Lexmark inkjet configuration"), - N("To be able to print with your Lexmark inkjet and this configuration, you need the inkjet printer drivers provided by Lexmark (http://www.lexmark.com/). Click on the \"Drivers\" link. Then choose your model and afterwards \"Linux\" as operating system. The drivers come as RPM packages or shell scripts with interactive graphical installation. You do not need to do this configuration by the graphical frontends. Cancel directly after the license agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and adjust the head alignment settings with this program.")); - } - } elsif ($printer->{currentqueue}{driver} eq 'drv_x125') { - # Set "Device" option - my $opt = - $drv_x125_options{$printer->{currentqueue}{connect}}; - if ($opt) { - $printer->{SPECIAL_OPTIONS} .= $opt; - } else { - $in->ask_warn(N("Lexmark X125 configuration"), - N("The driver for this printer only supports printers locally connected via USB, no printers on remote machines or print server boxes. Please connect your printer to a local USB port or configure it on the machine where it is connected to.")); - return 0; - } - # Set device permissions - if ($printer->{currentqueue}{connect} =~ - /^\s*(file|parallel|usb):(\S*)\s*$/) { - if ($printer->{SPOOLER} eq 'cups') { - set_permissions($2, '660', 'lp', 'sys'); - } elsif ($printer->{SPOOLER} eq 'pdq') { - set_permissions($2, '666'); - } else { - set_permissions($2, '660', 'lp', 'lp'); - } - } - # This is needed to have the device not blocked by the - # spooler backend. - $printer->{currentqueue}{connect} = 'file:/dev/null'; - } elsif ($printer->{currentqueue}{printer} eq 'HP-LaserJet_1000') { - $in->ask_warn(N("Firmware-Upload for HP LaserJet 1000"), - $hp1000fwtext); - } - if ($printer->{currentqueue}{foomatic}) { # Foomatic queue? - $printer->{ARGS} = - printer::main::read_foomatic_options($printer); - } elsif ($printer->{currentqueue}{ppd}) { # PPD queue? - $printer->{ARGS} = - printer::main::read_ppd_options($printer); - } - delete($printer->{SPECIAL_OPTIONS}); - } - } - 1; -} - -sub setup_options { - my ($printer, $in) = @_; - my @simple_options = - ("PageSize", # Media properties - "MediaType", - "Form", - "InputSlot", # Trays - "Tray", - "OutBin", - "OutputBin", - "FaceUp", - "FaceDown", - "Collate", - "Manual", - "ManualFeed", - "Manualfeed", - "ManualFeeder", - "Feeder", - "Duplex", # Double-sided printing - "Binding", - "Tumble", - "DoubleSided", - "Resolution", # Resolution/Quality - "GSResolution", - "HWResolution", - "JCLResolution", - "Quality", - "PrintQuality", - "PrintoutQuality", - "QualityType", - "ImageType", - "stpImageType", - "EconoMode", - "JCLEconoMode", - "FastRes", - "JCLFastRes", - "InkType", # Colour/Gray/BW, 4-ink/6-ink - "stpInkType", - "Mode", - "OutputMode", - "OutputType", - "ColorMode", - "ColorModel", - "PrintingMode", - "Monochrome", - "BlackOnly", - "Grayscale", - "GrayScale", - "Colour", - "Color", - "Gamma", # Lighter/Darker - "GammaCorrection", - "GammaGeneral", - "MasterGamma", - "StpGamma", - "stpGamma", - "EconoMode", # Ink/Toner saving - "Economode", - "TonerSaving", - "JCLEconomode", - "HPNup", # Other useful options - "InstalledMemory", # Laser printer hardware config - "Option1", - "Option2", - "Option3", - "Option4", - "Option5", - "Option6", - "Option7", - "Option8", - "Option9", - "Option10", - "Option11", - "Option12", - "Option13", - "Option14", - "Option15", - "Option16", - "Option17", - "Option18", - "Option19", - "Option20", - "Option21", - "Option22", - "Option23", - "Option24", - "Option25", - "Option26", - "Option27", - "Option28", - "Option29", - "Option30" - ); -# $in->set_help('setupOptions') if $::isInstall; - if ($printer->{currentqueue}{printer} || # We have a Foomatic queue - $printer->{currentqueue}{ppd}) { # We have a CUPS+PPD queue - # Set up the widgets for the option dialog - my $helptext = N("Printer default settings - -You should make sure that the page size and the ink type/printing mode (if available) and also the hardware configuration of laser printers (memory, duplex unit, extra trays) are set correctly. Note that with a very high printout quality/resolution printing can get substantially slower."); - my @widgets; - my @userinputs; - my @choicelists; - my @shortchoicelists; - my $i; - my @oldgroup = ("", ""); - for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) { - # Do not show hidden options (member options of a forced - # composite option) - next if $printer->{ARGS}[$i]{hidden}; - my $optshortdefault = $printer->{ARGS}[$i]{default}; - # Should the option only show when the "Advanced" button was - # clicked? - my $advanced = ((defined($printer->{ARGS}[$i]{group}) && - ($printer->{ARGS}[$i]{group} !~ - /^(|General|.*install.*)$/i)) || - (!($printer->{ARGS}[$i]{group}) && - !member($printer->{ARGS}[$i]{name}, - @simple_options)) ? 1 : 0); - # Group header - if ($printer->{ARGS}[$i]{group} ne $oldgroup[$advanced]) { - my $_level = $#{$printer->{ARGS}[$i]{grouptrans}}; - $oldgroup[$advanced] = $printer->{ARGS}[$i]{group}; - if ($printer->{ARGS}[$i]{group}) { - push(@widgets, - { val => - join(" / ", @{$printer->{ARGS}[$i]{grouptrans}}), - advanced => $advanced }); - } - } - if ($printer->{ARGS}[$i]{type} eq 'enum') { - # enumerated option - $choicelists[$i] = []; - $shortchoicelists[$i] = []; - foreach my $choice (@{$printer->{ARGS}[$i]{vals}}) { - push(@{$choicelists[$i]}, $choice->{comment}); - push(@{$shortchoicelists[$i]}, $choice->{value}); - if ($choice->{value} eq $optshortdefault) { - $userinputs[$i] = $choice->{comment}; - } - } - push(@widgets, - { label => $printer->{ARGS}[$i]{comment}, - val => \$userinputs[$i], - not_edit => 1, - list => \@{$choicelists[$i]}, - sort => 0, - advanced => $advanced, - help => $helptext }) - if ($printer->{ARGS}[$i]{name} ne 'PageRegion'); - } elsif ($printer->{ARGS}[$i]{type} eq 'bool') { - # boolean option - $choicelists[$i] = [($printer->{ARGS}[$i]{comment_true} || - $printer->{ARGS}[$i]{name} || "Yes"), - ($printer->{ARGS}[$i]{comment_false} || - $printer->{ARGS}[$i]{name_false} || - "No")]; - $shortchoicelists[$i] = []; - my $numdefault = - ($optshortdefault =~ m!^\s*(true|on|yes|1)\s*$! ? - "1" : "0"); - $userinputs[$i] = $choicelists[$i][1-$numdefault]; - push(@widgets, - { label => $printer->{ARGS}[$i]{comment}, - val => \$userinputs[$i], - not_edit => 1, - list => \@{$choicelists[$i]}, - sort => 0, - advanced => $advanced, - help => $helptext }); - } else { - # numerical option - $choicelists[$i] = []; - $shortchoicelists[$i] = []; - $userinputs[$i] = $optshortdefault; - push(@widgets, - { label => $printer->{ARGS}[$i]{comment} . - " ($printer->{ARGS}[$i]{min}... " . - "$printer->{ARGS}[$i]{max})", - #type => 'range', - #min => $printer->{ARGS}[$i]{min}, - #max => $printer->{ARGS}[$i]{max}, - val => \$userinputs[$i], - advanced => $advanced, - help => $helptext }); - } - } - # Show the options dialog. The call-back function does a - # range check of the numerical options. - my $windowtitle = "$printer->{currentqueue}{make} $printer->{currentqueue}{model}"; - if ($printer->{expert}) { - my $driver; - if ($driver = $printer->{currentqueue}{driver}) { - if ($printer->{currentqueue}{foomatic}) { - if ($driver eq 'Postscript') { - $driver = "PostScript"; - } else { - $driver = "GhostScript + $driver"; - } - } elsif ($printer->{currentqueue}{ppd}) { - if ($printer->{DBENTRY}) { - $driver = $1 if $printer->{DBENTRY} =~ /^[^\|]*\|[^\|]*\|(.*)$/; - } else { - $driver = printer::main::get_descr_from_ppd($printer); - if ($driver =~ /^[^\|]*\|[^\|]*$/) { # No driver info - $driver = "PPD"; - } else { - $driver = $1 if $driver =~ /^[^\|]*\|[^\|]*\|(.*)$/; - } - } - } - } - if ($driver) { - $windowtitle .= ", $driver"; - } - } - # Do not show the options setup dialog when installing a new printer - # in recommended mode without "Manual configuration" turned on. - if ((!$printer->{NEW} || $printer->{expert} || $printer->{MANUAL}) && - !$printer->{noninteractive}) { - return 0 if !$in->ask_from( - $windowtitle, - N("Printer default settings"), - \@widgets, - complete => sub { - my $i; - for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) { - if ($printer->{ARGS}[$i]{type} eq 'int' || $printer->{ARGS}[$i]{type} eq 'float') { - if ($printer->{ARGS}[$i]{type} eq 'int' && $userinputs[$i] !~ /^[\-\+]?[0-9]+$/) { - $in->ask_warn(N("Error"), N("Option %s must be an integer number!", $printer->{ARGS}[$i]{comment})); - return (1, $i); - } - if ($printer->{ARGS}[$i]{type} eq 'float' && $userinputs[$i] !~ /^[\-\+]?[0-9\.]+$/) { - $in->ask_warn(N("Error"), N("Option %s must be a number!", $printer->{ARGS}[$i]{comment})); - return (1, $i); - } - if ($userinputs[$i] < $printer->{ARGS}[$i]{min} || $userinputs[$i] > $printer->{ARGS}[$i]{max}) { - $in->ask_warn(N("Error"), N("Option %s out of range!", $printer->{ARGS}[$i]{comment})); - return (1, $i); - } - } - } - return 0; - }); - } - # Read out the user's choices and generate the appropriate command - # line arguments - @{$printer->{currentqueue}{options}} = (); - for ($i = 0; $i <= $#{$printer->{ARGS}}; $i++) { - # We did not show hidden options, so we do not have user input - # to add to the option list - next if $printer->{ARGS}[$i]{hidden}; - push(@{$printer->{currentqueue}{options}}, "-o"); - if ($printer->{ARGS}[$i]{type} eq 'enum') { - # enumerated option - my $j; - for ($j = 0; $j <= $#{$choicelists[$i]}; $j++) { - if ($choicelists[$i][$j] eq $userinputs[$i]) { - $printer->{ARGS}[$i]{default} = - $shortchoicelists[$i][$j]; - push(@{$printer->{currentqueue}{options}}, - $printer->{ARGS}[$i]{name} . "=" . - $shortchoicelists[$i][$j]); - } - } - } elsif ($printer->{ARGS}[$i]{type} eq 'bool') { - # boolean option - my $v = - ($choicelists[$i][0] eq $userinputs[$i] ? "1" : "0"); - $printer->{ARGS}[$i]{default} = $v; - push(@{$printer->{currentqueue}{options}}, - $printer->{ARGS}[$i]{name} . "=" . $v); - } else { - # numerical option - $printer->{ARGS}[$i]{default} = $userinputs[$i]; - push(@{$printer->{currentqueue}{options}}, - $printer->{ARGS}[$i]{name} . "=" . $userinputs[$i]); - } - } - } - 1; -} - -sub setasdefault { - my ($printer, $in) = @_; -# $in->set_help('setupAsDefault') if $::isInstall; - if ($printer->{DEFAULT} eq '' || # We have no default printer, - # so set the current one as default - $in->ask_yesorno(N("Printerdrake"), N("Do you want to set this printer (\"%s\")\nas the default printer?", $printer->{QUEUE}), 0)) { # Ask the user - $printer->{DEFAULT} = $printer->{QUEUE}; - printer::default::set_printer($printer); - } -} - -sub print_testpages { - my ($printer, $in, $upNetwork) = @_; -# $in->set_help('printTestPages') if $::isInstall; - # print test pages - my $res2 = 0; - my %options = (alta4 => 0, altletter => 0, ascii => 0, photo => 0, standard => 1); - my %old_options = (alta4 => 0, altletter => 0, ascii => 0, photo => 0, standard => 1); - my $oldres2 = 0; - my $res1 = $in->ask_from_( - { title => N("Test pages"), - messages => N("Please select the test pages you want to print. -Note: the photo test page can take a rather long time to get printed and on laser printers with too low memory it can even not come out. In most cases it is enough to print the standard test page."), - cancel => (!$printer->{NEW} ? - N("Cancel") : ($::isWizard ? N("Previous") : - N("No test pages"))), - ok => ($::isWizard ? N("Next") : N("Print")), - callbacks => { - changed => sub { - if ($oldres2 ne $res2) { - if ($res2) { - foreach my $opt (keys %options) { - $options{$opt} = 0; - $old_options{$opt} = 0; - } - } - $oldres2 = $res2; - } - foreach my $opt (keys %options) { - if ($old_options{$opt} ne $options{$opt}) { - if ($options{$opt}) { - $res2 = 0; - $oldres2 = 0; - } - $old_options{standard} = $options{standard}; - } - } - return 0; - } - } }, - [ - { text => N("Standard test page"), type => 'bool', - val => \$options{standard} }, - if_($printer->{expert}, - { text => N("Alternative test page (Letter)"), type => 'bool', - val => \$options{altletter} }), - if_($printer->{expert}, - { text => N("Alternative test page (A4)"), type => 'bool', - val => \$options{alta4} }), - { text => N("Photo test page"), type => 'bool', val => \$options{photo} }, - #{ text => N("Plain text test page"), type => 'bool', - # val => \$options{ascii} } - if_($::isWizard, - { text => N("Do not print any test page"), type => 'bool', - val => \$res2 }) - ]); - $res2 = 1 if !($options{standard} || $options{altletter} || $options{alta4} || $options{photo} || $options{ascii}); - if ($res1 && !$res2) { - my @lpq_output; - { - my $_w = $in->wait_message(N("Printerdrake"), - N("Printing test page(s)...")); - - $upNetwork and do { &$upNetwork(); undef $upNetwork; sleep(1) }; - my $stdtestpage = "/usr/share/printer-testpages/testprint.ps"; - my $altlttestpage = "/usr/share/printer-testpages/testpage.ps"; - my $alta4testpage = "/usr/share/printer-testpages/testpage-a4.ps"; - my $phototestpage = "/usr/share/printer-testpages/photo-testpage.jpg"; - my $asciitestpage = "/usr/share/printer-testpages/testpage.asc"; - my @testpages; - # Install the filter to convert the photo test page to PS - if ($printer->{SPOOLER} ne "cups" && $options{photo} && !$::testing && - !files_exist('/usr/bin/convert')) { - $in->do_pkgs->install('ImageMagick') - or do { - $in->ask_warn(N("Warning"), - N("Could not install the %s package!", - "ImageMagick") . " " . - N("Skipping photo test page.")); - $options{photo} = 0; - }; - } - # set up list of pages to print - $options{standard} and push @testpages, $stdtestpage; - $options{altletter} and push @testpages, $altlttestpage; - $options{alta4} and push @testpages, $alta4testpage; - $options{photo} and push @testpages, $phototestpage; - $options{ascii} and push @testpages, $asciitestpage; - # Nothing to print - return 1 if $#testpages < 0; - # print the stuff - @lpq_output = printer::main::print_pages($printer, @testpages); - } - my $dialogtext; - if (@lpq_output) { - $dialogtext = N("Test page(s) have been sent to the printer. -It may take some time before the printer starts. -Printing status:\n%s\n\n", @lpq_output); - } else { - $dialogtext = N("Test page(s) have been sent to the printer. -It may take some time before the printer starts.\n"); - } - if ($printer->{NEW} == 0) { - $in->ask_warn(N("Printerdrake"),$dialogtext); - return 1; - } else { - $in->ask_yesorno(N("Printerdrake"), $dialogtext . N("Did it work properly?"), 1) - and return 1; - } - } else { - return($::isWizard ? $res1 : 1); - } - return 2; -} - -sub printer_help { - my ($printer, $in) = @_; - my $spooler = $printer->{SPOOLER}; - my $queue = $printer->{QUEUE}; - my $default = $printer->{DEFAULT}; - my $raw = 0; - my $cupsremote = 0; - my $scanning = ""; - my $photocard = ""; - my $hp11000fw = ""; - if ($printer->{configured}{$queue}) { - if ($printer->{configured}{$queue}{queuedata}{model} eq "Unknown model" || - $printer->{configured}{$queue}{queuedata}{model} eq N("Raw printer")) { - $raw = 1; - } - # Information about scanning with HP's multi-function devices - $scanning = scanner_help( - $printer->{configured}{$queue}{queuedata}{make} . " " . - $printer->{configured}{$queue}{queuedata}{model}, - $printer->{configured}{$queue}{queuedata}{connect}); - if ($scanning) { - $scanning = "\n\n$scanning\n\n"; - } - # Information about photo card access with HP's multi-function devices - $photocard = photocard_help( - $printer->{configured}{$queue}{queuedata}{make} . " " . - $printer->{configured}{$queue}{queuedata}{model}, - $printer->{configured}{$queue}{queuedata}{connect}); - if ($photocard) { - $photocard = "\n\n$photocard\n\n"; - } - if ($printer->{configured}{$queue}{queuedata}{printer} eq - 'HP-LaserJet_1000') { - $hp11000fw = "\n\n$hp1000fwtext\n"; - } - } else { - $cupsremote = 1; - } - - my $dialogtext; - if ($spooler eq "cups") { - $dialogtext = -N("To print a file from the command line (terminal window) you can either use the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or \"kprinter <file>\". The graphical tools allow you to choose the printer and to modify the option settings easily. -", ($queue ne $default ? "lpr -P $queue" : "lpr")) . -N("These commands you can also use in the \"Printing command\" field of the printing dialogs of many applications, but here do not supply the file name because the file to print is provided by the application. -") . -(!$raw ? -N(" -The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) . -(!$cupsremote ? - N("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s - -", $scanning, $photocard, $hp11000fw) . printer::main::help_output($printer, 'cups') : - $scanning . $photocard . $hp11000fw . - N("Here is a list of the available printing options for the current printer: - -") . printer::main::help_output($printer, 'cups')) : $scanning . $photocard . $hp11000fw); - } elsif ($spooler eq "lprng") { - $dialogtext = -N("To print a file from the command line (terminal window) use the command \"%s <file>\". -", ($queue ne $default ? "lpr -P $queue" : "lpr")) . -N("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application. -") . -(!$raw ? -N(" -The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -Z option=setting -Z switch" : "lpr -Z option=setting -Z switch")) . -N("To get a list of the options available for the current printer click on the \"Print option list\" button.") . $scanning . $photocard . $hp11000fw : $scanning . $photocard . $hp11000fw); - } elsif ($spooler eq "lpd") { - $dialogtext = -N("To print a file from the command line (terminal window) use the command \"%s <file>\". -", ($queue ne $default ? "lpr -P $queue" : "lpr")) . -N("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application. -") . -(!$raw ? -N(" -The \"%s\" command also allows to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". ", "lpr", ($queue ne $default ? "lpr -P $queue -o option=setting -o switch" : "lpr -o option=setting -o switch")) . -N("To get a list of the options available for the current printer click on the \"Print option list\" button.") . $scanning . $photocard . $hp11000fw : $scanning . $photocard . $hp11000fw); - } elsif ($spooler eq "pdq") { - $dialogtext = -N("To print a file from the command line (terminal window) use the command \"%s <file>\" or \"%s <file>\". -", ($queue ne $default ? "pdq -P $queue" : "pdq"), ($queue ne $default ? "lpr -P $queue" : "lpr")) . -N("This command you can also use in the \"Printing command\" field of the printing dialogs of many applications. But here do not supply the file name because the file to print is provided by the application. -") . -N("You can also use the graphical interface \"xpdq\" for setting options and handling printing jobs. -If you are using KDE as desktop environment you have a \"panic button\", an icon on the desktop, labeled with \"STOP Printer!\", which stops all print jobs immediately when you click it. This is for example useful for paper jams. -") . -(!$raw ? -N(" -The \"%s\" and \"%s\" commands also allow to modify the option settings for a particular printing job. Simply add the desired settings to the command line, e. g. \"%s <file>\". -", "pdq", "lpr", ($queue ne $default ? "pdq -P $queue -aoption=setting -oswitch" : "pdq -aoption=setting -oswitch")) . -N("To know about the options available for the current printer read either the list shown below or click on the \"Print option list\" button.%s%s%s - -", $scanning, $photocard, $hp11000fw) . printer::main::help_output($printer, 'pdq') : - $scanning . $photocard . $hp11000fw); - } - my $windowtitle = ($scanning ? - ($photocard ? - N("Printing/Scanning/Photo Cards on \"%s\"", $queue) : - N("Printing/Scanning on \"%s\"", $queue)) : - ($photocard ? - N("Printing/Photo Card Access on \"%s\"", $queue) : - N("Printing on the printer \"%s\"", $queue))); - if (!$raw && !$cupsremote) { - my $choice; - while ($choice ne N("Close")) { - $choice = $in->ask_from_list_( - $windowtitle, $dialogtext, - [ N("Print option list"), N("Close") ], - N("Close")); - if ($choice ne N("Close")) { - my $_w = $in->wait_message(N("Printerdrake"), - N("Printing test page(s)...")); - printer::main::print_optionlist($printer); - } - } - } else { - $in->ask_warn($windowtitle, $dialogtext); - } -} - -sub scanner_help { - my ($makemodel, $deviceuri) = @_; - if ($deviceuri =~ m!^ptal://?(.*?)$!) { - my $ptaldevice = $1; - if ($makemodel !~ /HP\s+PhotoSmart/i && - $makemodel !~ /HP\s+LaserJet\s+2200/i && - $makemodel !~ /HP\s+(DeskJet|dj)\s*450/i) { - # Models with built-in scanner - return N("Your multi-function device was configured automatically to be able to scan. Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the scanner when you have more than one) from the command line or with the graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, you can also scan by choosing the appropriate point in the \"File\"/\"Acquire\" menu. Call also \"man scanimage\" on the command line to get more information. - -Do not use \"scannerdrake\" for this device!", - $ptaldevice); - } else { - # Scanner-less models - return ""; - } - } -} - -sub photocard_help { - my ($makemodel, $deviceuri) = @_; - if ($deviceuri =~ m!^ptal://?(.*?)$!) { - my $ptaldevice = $1; - if (($makemodel =~ /HP\s+PhotoSmart/i || - $makemodel =~ /HP\s+PSC\s*9[05]0/i || - $makemodel =~ /HP\s+PSC\s*135\d/i || - $makemodel =~ /HP\s+PSC\s*21[57]\d/i || - $makemodel =~ /HP\s+PSC\s*22\d\d/i || - $makemodel =~ /HP\s+PSC\s*2[45]\d\d/i || - $makemodel =~ /HP\s+OfficeJet\s+D\s*1[45]5/i || - $makemodel =~ /HP\s+OfficeJet\s+71[34]0/i || - $makemodel =~ /HP\s+(DeskJet|dj)\s*450/i) && - $makemodel !~ /HP\s+PhotoSmart\s+7150/i) { - # Models with built-in photo card drives - return N("Your printer was configured automatically to give you access to the photo card drives from your PC. Now you can access your photo cards using the graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> \"MTools File Manager\") or the command line utilities \"mtools\" (enter \"man mtools\" on the command line for more info). You find the card's file system under the drive letter \"p:\", or subsequent drive letters when you have more than one HP printer with photo card drives. In \"MtoolsFM\" you can switch between drive letters with the field at the upper-right corners of the file lists.", - $ptaldevice); - } else { - # Photo-card-drive-less models - return ""; - } - } -} - -sub copy_queues_from { - my ($printer, $in, $oldspooler) = @_; - -# $in->set_help('copyQueues') if $::isInstall; - my $newspooler = $printer->{SPOOLER}; - my @oldqueues; - my @queueentries; - my @queuesselected; - my $newspoolerstr; - my $oldspoolerstr; - my $noninteractive = 0; - { - my $_w = $in->wait_message(N("Printerdrake"), - N("Reading printer data...")); - @oldqueues = printer::main::get_copiable_queues($oldspooler, $newspooler); - @oldqueues = sort(@oldqueues); - $newspoolerstr = $printer::data::spoolers{$newspooler}{short_name}; - $oldspoolerstr = $printer::data::spoolers{$oldspooler}{short_name}; - foreach (@oldqueues) { - push @queuesselected, 1; - push @queueentries, { text => $_, type => 'bool', - val => \$queuesselected[-1] }; - } - # LPRng and LPD use the same config files, therefore one sees the - # queues of LPD when one uses LPRng and vice versa, but these queues - # do not work. So automatically transfer all queues when switching - # between LPD and LPRng. - if ($oldspooler =~ /^lp/ && $newspooler =~ /^lp/) { - $noninteractive = 1; - } - } - if ($noninteractive || - $in->ask_from_( - { title => N("Transfer printer configuration"), - messages => N("You can copy the printer configuration which you have done for the spooler %s to %s, your current spooler. All the configuration data (printer name, description, location, connection type, and default option settings) is overtaken, but jobs will not be transferred. -Not all queues can be transferred due to the following reasons: -", $oldspoolerstr, $newspoolerstr) . -($newspooler eq "cups" ? N("CUPS does not support printers on Novell servers or printers sending the data into a free-formed command. -") : - ($newspooler eq "pdq" ? N("PDQ only supports local printers, remote LPD printers, and Socket/TCP printers. -") : - N("LPD and LPRng do not support IPP printers. -"))) . -N("In addition, queues not created with this program or \"foomatic-configure\" cannot be transferred.") . -if_($oldspooler eq "cups", N(" -Also printers configured with the PPD files provided by their manufacturers or with native CUPS drivers cannot be transferred.")) . N(" -Mark the printers which you want to transfer and click -\"Transfer\"."), - cancel => N("Do not transfer printers"), - ok => N("Transfer") - }, - \@queueentries - )) { - my $queuecopied = 0; - foreach (@oldqueues) { - if (shift(@queuesselected)) { - my $oldqueue = $_; - my $newqueue = $_; - if (!$printer->{configured}{$newqueue} || $noninteractive || - $in->ask_from_( - { title => N("Transfer printer configuration"), - messages => N("A printer named \"%s\" already exists under %s. -Click \"Transfer\" to overwrite it. -You can also type a new name or skip this printer.", - $newqueue, $newspoolerstr), - ok => N("Transfer"), - cancel => N("Skip"), - callbacks => { complete => sub { - unless ($newqueue =~ /^\w+$/) { - $in->ask_warn(N("Error"), N("Name of printer should contain only letters, numbers and the underscore")); - return (1,0); - } - if ($printer->{configured}{$newqueue} - && $newqueue ne $oldqueue && - !$in->ask_yesorno(N("Warning"), N("The printer \"%s\" already exists,\ndo you really want to overwrite its configuration?", - $newqueue), - 0)) { - return (1,0); # Let the user correct the name - } - return 0; - } } - }, - [{label => N("New printer name"),val => \$newqueue }])) { - { - my $_w = $in->wait_message(N("Printerdrake"), - N("Transferring %s...", $oldqueue)); - printer::main::copy_foomatic_queue($printer, $oldqueue, - $oldspooler, $newqueue) and - $queuecopied = 1; - } - if ($oldqueue eq $printer->{DEFAULT}) { - # Make the former default printer the new default - # printer if the user does not reject - if ($noninteractive || - $in->ask_yesorno( - N("Transfer printer configuration"), - N("You have transferred your former default printer (\"%s\"), Should it be also the default printer under the new printing system %s?", $oldqueue, $newspoolerstr), 1)) { - $printer->{DEFAULT} = $newqueue; - printer::default::set_printer($printer); - } - } - } - } - } - if ($queuecopied) { - my $_w = $in->wait_message(N("Printerdrake"), - N("Refreshing printer data...")); - printer::main::read_configured_queues($printer); - } - } -} - -sub start_network { - my ($in, $upNetwork) = @_; - my $_w = $in->wait_message(N("Printerdrake"), - N("Starting network...")); - if ($::isInstall) { - return ($upNetwork and - do { my $ret = &$upNetwork(); - undef $upNetwork; - sleep(1); - $ret }); - } else { return printer::services::start("network") } -} - -sub network_configured() { - # Do configured networks (/etc/sysconfig/network-scripts/ifcfg*) exist? - my @netscripts = - cat_("ls -1 $::prefix/etc/sysconfig/network-scripts/ |"); - my $netconfigured = 0; - (/ifcfg-/ and !/(ifcfg-lo|:|rpmsave|rpmorig|rpmnew)/ and - !/(~|\.bak)$/ and $netconfigured = 1) foreach @netscripts; - return $netconfigured; -} - -sub check_network { - - # This routine is called whenever the user tries to configure a remote - # printer. It checks the state of the network functionality to assure - # that the network is up and running so that the remote printer is - # reachable. - - my ($printer, $in, $upNetwork, $dontconfigure) = @_; - - # Any additional dialogs caused by this subroutine should appear as - # extra windows and not embedded in the "Add printer" wizard. - local $::isWizard = 0; - -# $in->set_help('checkNetwork') if $::isInstall; - - # First check: Do configured networks - # (/etc/sysconfig/network-scripts/ifcfg*) exist? - - if (!$dontconfigure && !network_configured()) { - my $go_on = 0; - while (!$go_on) { - my $choice = N("Configure the network now"); - if ($in->ask_from(N("Network functionality not configured"), - N("You are going to configure a remote printer. This needs working network access, but your network is not configured yet. If you go on without network configuration, you will not be able to use the printer which you are configuring now. How do you want to proceed?"), - [ { val => \$choice, type => 'list', - list => [ N("Configure the network now"), - N("Go on without configuring the network") ] } ])) { - if ($choice eq N("Configure the network now")) { - if ($::isInstall) { - require network::netconnect; - network::netconnect::main( - $in->{prefix}, $in->{netcnx} ||= {}, - $in, $in->{netc}, $in->{mouse}, - $in->{intf}); -# my ($prefix, $netcnx, $in, $o_netc, $o_mouse, $o_intf, $o_first_time, $o_noauto) = @_; - } else { - system("/usr/sbin/drakconnect"); - } - $go_on = network_configured(); - } else { - return 1; - } - } else { - return 0; - } - } - } - - # Do not try to start the network if it is not configured - if (!network_configured()) { return 0 } - - # Second check: Is the network running? - - if (printer::detect::network_running()) { return 1 } - - # The network is configured now, start it. - if (!start_network($in, $upNetwork) && - (!$dontconfigure || $::isInstall)) { - $in->ask_warn(N("Warning"), -($::isInstall ? -N("The network configuration done during the installation cannot be started now. Please check whether the network is accessible after booting your system and correct the configuration using the %s Control Center, section \"Network & Internet\"/\"Connection\", and afterwards set up the printer, also using the %s Control Center, section \"Hardware\"/\"Printer\"", $shortdistroname, $shortdistroname) : -N("The network access was not running and could not be started. Please check your configuration and your hardware. Then try to configure your remote printer again."))); - return 0; - } - - # Give a SIGHUP to the daemon and in case of CUPS do also the - # automatic configuration of broadcasting/access permissions - # The daemon is not really restarted but only SIGHUPped to not - # interrupt print jobs. - - my $_w = $in->wait_message(N("Printerdrake"), - N("Restarting printing system...")); - - return printer::main::SIGHUP_daemon($printer->{SPOOLER}); - -} - -sub security_check { - # Check the security mode and when in "high" or "paranoid" mode ask the - # user whether he really wants to configure printing. - my ($_printer, $in, $spooler) = @_; - - # Any additional dialogs caused by this subroutine should appear as - # extra windows and not embedded in the "Add printer" wizard. - local $::isWizard = 0; - -# $in->set_help('securityCheck') if $::isInstall; - - # Get security level - my $security; - if ($::isInstall) { - $security = $in->{security}; - } else { - require security::level; - $security = security::level::get(); - } - - # Exit silently if the spooler is PDQ - if ($spooler eq "pdq") { return 1 } - - # Exit silently in medium or lower security levels - if (!$security || $security < 4) { return 1 } - - # Exit silently if the current spooler is already activated for the current - # security level - if (printer::main::spooler_in_security_level($spooler, $security)) { return 1 } - - # Tell user in which security mode he is and ask him whether he really - # wants to activate the spooler in the given security mode. Stop the - # operation of installing the spooler if he disagrees. - my $securitystr = ($security == 4 ? N("high") : N("paranoid")); - if ($in->ask_yesorno(N("Installing a printing system in the %s security level", $securitystr), - N("You are about to install the printing system %s on a system running in the %s security level. - -This printing system runs a daemon (background process) which waits for print jobs and handles them. This daemon is also accessible by remote machines through the network and so it is a possible point for attacks. Therefore only a few selected daemons are started by default in this security level. - -Do you really want to configure printing on this machine?", - $printer::data::spoolers{$spooler}{short_name}, - $securitystr))) { - printer::main::add_spooler_to_security_level($spooler, $security); - my $service; - if ($spooler eq "lpr" || $spooler eq "lprng") { - $service = "lpd"; - } else { - $service = $spooler; - } - services::start_service_on_boot($service); #TV - return 1; - } else { - return 0; - } -} - -sub start_spooler_on_boot { - # Checks whether the spooler will be started at boot time and if not, - # ask the user whether he wants to start the spooler at boot time. - my ($printer, $in, $service) = @_; - # PDQ has no daemon, so nothing needs to be started : - return unless $service; - - # Any additional dialogs caused by this subroutine should appear as - # extra windows and not embedded in the "Add printer" wizard. - local $::isWizard = 0; - -# $in->set_help('startSpoolerOnBoot') if $::isInstall; - if (!services::starts_on_boot($service)) { - if ($in->ask_yesorno(N("Starting the printing system at boot time"), - N("The printing system (%s) will not be started automatically when the machine is booted. - -It is possible that the automatic starting was turned off by changing to a higher security level, because the printing system is a potential point for attacks. - -Do you want to have the automatic starting of the printing system turned on again?", - $printer::data::spoolers{$printer->{SPOOLER}}{short_name}))) { - services::start_service_on_boot($service); - } - } - 1; -} - -sub install_spooler { - # installs the default spooler and start its daemon - my ($printer, $in, $upNetwork) = @_; - return 1 if $::testing; - my $spooler = $printer->{SPOOLER}; - # If the user refuses to install the spooler in high or paranoid - # security level, exit. - return 0 unless security_check($printer, $in, $spooler); - return 1 if $spooler !~ /^(cups|lpd|lprng|pqd)$/; # should not happen - my $w = $in->wait_message(N("Printerdrake"), N("Checking installed software...")); - - # "lpr" conflicts with "LPRng", remove either "LPRng" or remove "lpr" - my $packages = $spoolers{$spooler}{packages2rm}; - if ($packages && files_exist($packages->[1])) { - undef $w; - $w = $in->wait_message(N("Printerdrake"), N("Removing %s ..."), $spoolers{$packages->[0]}{short_name}); - $in->do_pkgs->remove_nodeps($packages->[0]) - or do { - $in->ask_warn(N("Error"), - N("Could not remove the %s printing system!", - $spoolers{$packages->[0]}{short_name})); - return 0; - }; - } - - $packages = $spoolers{$spooler}{packages2add}; - if ($packages && !files_exist(@{$packages->[1]})) { - undef $w; - $w = $in->wait_message(N("Printerdrake"), N("Installing %s ..."), $spoolers{$spooler}{short_name}); - $in->do_pkgs->install(@{$packages->[0]}) - or do { - $in->ask_warn(N("Error"), - N("Could not install the %s printing system!", - $spoolers{$spooler}{short_name})); - return 0; - }; - } - - undef $w; - - # Start the network (especially during installation), so the - # user can set up queues to remote printers. - - $upNetwork and do { - &$upNetwork(); - undef $upNetwork; - sleep(1); - }; - - # Start daemon - if ($spooler eq "cups") { - # Start daemon - # Avoid unnecessary restarting of CUPS, this blocks the - # startup of printerdrake for several seconds. - printer::services::start_not_running_service("cups"); - } elsif ($spoolers{$spooler}{service}) { - printer::services::restart($spoolers{$spooler}{service}); - } - - # Set the choosen spooler tools as defaults for "lpr", "lpq", "lprm", ... - foreach (@{$spoolers{$spooler}{alternatives}}) { - set_alternative($_->[0], $_->[1]); - } - - # Remove/add PDQ panic buttons from the user's KDE Desktops - printer::main::pdq_panic_button($spooler eq 'pdq' ? "add" : "remove"); - - # Should it be started at boot time? - start_spooler_on_boot($printer, $in, $spoolers{$spooler}{boot_spooler}); - - # Give a SIGHUP to the devfsd daemon to correct the permissions - # for the /dev/... files according to the spooler - printer::main::SIGHUP_daemon("devfs"); - 1; -} - -sub assure_default_printer_is_set { - my ($printer, $in) = @_; - if (defined($printer->{SPOOLER}) && $printer->{SPOOLER} && - (!defined($printer->{DEFAULT}) || !$printer->{DEFAULT})) { - my $_w = $in->wait_message(N("Printerdrake"), - N("Setting Default Printer...")); - $printer->{DEFAULT} = printer::default::get_printer($printer); - if ($printer->{DEFAULT}) { - # If a CUPS system has only remote printers and no default - # printer defined, it defines the first printer whose - # broadcast signal appeared after the start of the CUPS - # daemon, so on every start another printer gets the default - # printer. To avoid this, make sure that the default printer - # is defined. - printer::default::set_printer($printer); - } else { $printer->{DEFAULT} = '' } - } -} - -sub setup_default_spooler { - my ($printer, $in, $upNetwork) = @_; - $printer->{SPOOLER} ||= 'cups'; - my $oldspooler = $printer->{SPOOLER}; - - my $str_spooler = - $in->ask_from_listf_raw({ title => N("Select Printer Spooler"), - messages => N("Which printing system (spooler) do you want to use?"), - interactive_help_id => 'setupDefaultSpooler', - }, - sub { translate($_[0]) }, - [ printer::main::spooler() ], - $spoolers{$printer->{SPOOLER}}{long_name}, - ) or return; - $printer->{SPOOLER} = $spooler_inv{$str_spooler}; - # Install the spooler if not done yet - if (!install_spooler($printer, $in, $upNetwork)) { - $printer->{SPOOLER} = $oldspooler; - return; - } - if ($printer->{SPOOLER} ne $oldspooler) { - # Remove the local printers from Star Office/OpenOffice.org/GIMP - printer::main::removelocalprintersfromapplications($printer); - # Get the queues of this spooler - { - my $_w = $in->wait_message(N("Printerdrake"), - N("Reading printer data...")); - printer::main::read_configured_queues($printer); - } - # Copy queues from former spooler - copy_queues_from($printer, $in, $oldspooler); - # Re-read the printer database (CUPS has additional drivers, PDQ - # has no raw queue) - %printer::main::thedb = (); - assure_default_printer_is_set($printer, $in); - # Configure the current printer queues in applications - my $_w = - $in->wait_message(N("Printerdrake"), - N("Configuring applications...")); - printer::main::configureapplications($printer); - } - # Save spooler choice - printer::default::set_spooler($printer); - return $printer->{SPOOLER}; -} - -sub configure_queue { - my ($printer, $in) = @_; - my $_w = $in->wait_message(N("Printerdrake"), - N("Configuring printer \"%s\"...", - $printer->{currentqueue}{queue})) - if !$printer->{noninteractive}; - $printer->{complete} = 1; - my $retval = printer::main::configure_queue($printer); - $printer->{complete} = 0; - if (!$retval) { - local $::isWizard = 0; - $in->ask_warn(N("Printerdrake"), - N("Failed to configure printer \"%s\"!", - $printer->{currentqueue}{queue})); - } - return $retval; -} - -sub install_foomatic { - my ($in) = @_; - if (!$::testing && - !files_exist(qw(/usr/bin/foomatic-configure - /usr/bin/foomatic-rip - /usr/share/foomatic/db/source/driver/ljet4.xml))) { - my $_w = $in->wait_message(N("Printerdrake"), - N("Installing Foomatic...")); - $in->do_pkgs->install('foomatic-db-engine', - 'foomatic-filters', - 'foomatic-db') - or do { - $in->ask_warn(N("Error"), - N("Could not install %s packages, %s cannot be started!", - "Foomatic", "printerdrake")); - exit 1; - }; - } -} - -sub wizard_close { - my ($in, $mode) = @_; - # Leave wizard mode with congratulations screen if $mode = 1 - $::Wizard_no_previous = 1; - $::Wizard_no_cancel = 1; - $::Wizard_finished = 1; - wizard_congratulations($in) if $mode == 1; - undef $::isWizard; - $::WizardWindow->destroy if defined $::WizardWindow; - undef $::WizardWindow; -}; - -#- Program entry point for configuration of the printing system. -sub main { - my ($printer, $in, $install_step, $upNetwork) = @_; - # $install_step is only made use of during the installation. It is - # 0 when this function is called during the preparation of the "Summary" - # screen and 1 when the user clicks on "Configure" on the "Summary" - # screen - - # Initialization of Printerdrake and queue auto-installation: - # During installation we do this step only once, when we prepare - # the "Summary" screen in case of detected local printers or when - # the "Configure" button in the "Printer" entry of the "Summary" - # screen is clicked. If the button is clicked after an automatic - # installation of local printers or if it is clicked for the - # second time, these steps are not repeated. - if (!$::isInstall || !$::printerdrake_initialized) { - init($printer, $in, $upNetwork) or return; - } - - # Main loop: During installation we only enter it when the user has - # clicked on the "Configure" button in the "Summary" step. We do not - # call it during the preparation of the "Summary" screen. - if (!$::isInstall || $install_step == 1) { - # Ask for a spooler when none is defined yet - $printer->{SPOOLER} ||= - setup_default_spooler($printer, $in, $upNetwork) || return; - - # Save the default spooler - printer::default::set_spooler($printer); - - mainwindow_interactive($printer, $in, $upNetwork); - } - # In the installation we call the clean-up manually when we leave - # the "Summary" step - if (!$::isInstall) { - final_cleanup($printer); - } -} - -sub init { - my ($printer, $in, $upNetwork) = @_; - - # Initialization of Printerdrake and queue auto-installation - - # Save the user mode, so that the same one is used on the next start - # of Printerdrake - printer::main::set_usermode($printer->{expert}); - - # printerdrake does not work without foomatic, and for more - # convenience we install some more stuff - { - my $_w = $in->wait_message(N("Printerdrake"), - N("Checking installed software...")); - if (!$::testing && - !files_exist(qw(/usr/bin/foomatic-configure - /usr/lib/perl5/vendor_perl/5.8.0/Foomatic/DB.pm - /usr/bin/foomatic-rip - /usr/share/foomatic/db/source/driver/ljet4.xml - /usr/bin/escputil - /usr/share/printer-testpages/testprint.ps - /usr/bin/nmap - /usr/bin/scli - ), - if_(files_exist("/usr/bin/gimp"), - "/usr/lib/gimp/1.2/plug-ins/print") - )) { - $in->do_pkgs->install('foomatic-db-engine', 'foomatic-filters', - 'foomatic-db', 'printer-utils', - 'printer-testpages', 'nmap', 'scli', - if_($in->do_pkgs->is_installed('gimp'), - 'gimpprint')) - or do { - $in->ask_warn(N("Error"), - N("Could not install necessary packages, %s cannot be started!", - "printerdrake")); - exit 1; - }; - } - - # only experts should be asked for the spooler - $printer->{SPOOLER} ||= 'cups' if !$printer->{expert}; - - } - - # If we have chosen a spooler, install it and mark it as default - # spooler - if ($printer->{SPOOLER}) { - return 0 unless install_spooler($printer, $in, $upNetwork); - printer::default::set_spooler($printer); - } - - # Get the default printer (Done before non-interactive queue setup, - # so that former default is not lost) - assure_default_printer_is_set($printer, $in); - my $nodefault = !$printer->{DEFAULT}; - - # Non-interactive setup of newly detected printers (This is done - # only when not in expert mode, so we always have a spooler defined - # here) - configure_new_printers($printer, $in, $upNetwork); - - # Make sure that default printer is registered - if ($nodefault && $printer->{DEFAULT}) { - printer::default::set_printer($printer); - } - - # Configure the current printer queues in applications - my $w = - $in->wait_message(N("Printerdrake"), - N("Configuring applications...")); - printer::main::configureapplications($printer); - undef $w; - - # Turn on printer autodetection by default - $printer->{AUTODETECT} = 1; - $printer->{AUTODETECTLOCAL} = 1; - $printer->{AUTODETECTNETWORK} = 1; - $printer->{AUTODETECTSMB} = 1; - - # Mark this part as done, it should not be done a second time. - if ($::isInstall) { - $::printerdrake_initialized = 1; - } - - return 1; -} - -sub mainwindow_interactive { - - my ($printer, $in, $upNetwork) = @_; - - # Control variables for the main loop - my ($menuchoice, $cursorpos) = ('', '::'); - - while (1) { - my ($queue, $newcursorpos) = ('', 0); - # If networking is configured, start it, but don't ask the - # user to configure networking. We want to know whether we - # have a local network to suppress some buttons when there is - # no network - my $havelocalnetworks = - check_network($printer, $in, $upNetwork, 1) && - printer::detect::getIPsInLocalNetworks() != (); - my $havelocalnetworks_or_expert = - $printer->{expert} || $havelocalnetworks; -# $in->set_help('mainMenu') if $::isInstall; - # Initialize the cursor position - if ($cursorpos eq "::" && - $printer->{DEFAULT} && - $printer->{DEFAULT} ne "") { - if (defined($printer->{configured}{$printer->{DEFAULT}})) { - $cursorpos = - $printer->{configured}{$printer->{DEFAULT}}{queuedata}{menuentry} . N(" (Default)"); - } elsif ($printer->{SPOOLER} eq "cups") { - $cursorpos = find { /!$printer->{DEFAULT}:[^!]*$/ } printer::cups::get_formatted_remote_queues($printer); - } - } - # Generate the list of available printers - my @printerlist = - (sort(map { $printer->{configured}{$_}{queuedata}{menuentry} - . ($_ eq $printer->{DEFAULT} ? - N(" (Default)") : "") } - keys(%{$printer->{configured} - || {}})), - ($printer->{SPOOLER} eq "cups" ? - sort(printer::cups::get_formatted_remote_queues($printer)) : - ())); - my $noprinters = $#printerlist < 0; - # Position the cursor where it was before (in case - # a button was pressed). - $menuchoice = $cursorpos; - # Show the main dialog - $in->ask_from_({ - title => N("Printerdrake"), - messages => if_(!$noprinters, N("The following printers are configured. Double-click on a printer to change its settings; to make it the default printer; or to view information about it. ")) . - if_(!$havelocalnetworks, N("\nWARNING: No local network connection active, remote printers can neither be detected nor tested!")), - cancel => (""), - ok => ("") }, - # List the queues - [ if_(!$noprinters, - { val => \$menuchoice, format => \&translate, - sort => 0, separator => "!", tree_expanded => 1, - quit_if_double_click => 1, allow_empty_list => 1, - list => \@printerlist }), - { clicked_may_quit => - sub { - # Save the cursor position - $cursorpos = $menuchoice; - $menuchoice = '@addprinter'; - 1; - }, - val => N("Add a new printer") }, - ($printer->{SPOOLER} eq "cups" && - $havelocalnetworks ? - ({ clicked_may_quit => - sub { - # Save the cursor position - $cursorpos = $menuchoice; - $menuchoice = '@refresh'; - 1; - }, - val => ($noprinters ? - N("Display all available remote CUPS printers") : - N("Refresh printer list (to display all available remote CUPS printers)")) }) : ()), - ($printer->{SPOOLER} eq "cups" && - $havelocalnetworks_or_expert ? - ({ clicked_may_quit => - sub { - # Save the cursor position - $cursorpos = $menuchoice; - $menuchoice = '@cupsconfig'; - 1; - }, - val => N("CUPS configuration") }) : ()), - ($printer->{expert} && - (files_exist(qw(/usr/bin/pdq)) || - files_exist(qw(/usr/lib/filters/lpf - /usr/sbin/lpd))) ? - { clicked_may_quit => - sub { - # Save the cursor position - $cursorpos = $menuchoice; - $menuchoice = '@spooler'; - 1; - }, - val => N("Change the printing system") } : - ()), - { clicked_may_quit => - sub { - # Save the cursor position - $cursorpos = $menuchoice; - $menuchoice = '@usermode'; - 1 - }, - val => ($printer->{expert} ? N("Normal Mode") : - N("Expert Mode")) }, - { clicked_may_quit => - sub { $menuchoice = '@quit'; 1 }, - val => ($::isEmbedded || $::isInstall ? - N("Done") : N("Quit")) }, - ]); - # Toggle expert mode and standard mode - if ($menuchoice eq '@usermode') { - $printer->{expert} = printer::main::set_usermode(!$printer->{expert}); - # Read printer database for the new user mode - %printer::main::thedb = (); - # Modify menu entries to switch the tree - # structure between expert/normal mode. - my $spooler = - $spoolers{$printer->{SPOOLER}}{short_name}; - if ($printer->{expert}) { - foreach (keys(%{$printer->{configured}})) { - $printer->{configured}{$_}{queuedata}{menuentry} =~ - s/^/$spooler!/; - } - $cursorpos =~ s/^/$spooler!/; - } else { - foreach (keys(%{$printer->{configured}})) { - $printer->{configured}{$_}{queuedata}{menuentry} =~ - s/^$spooler!//; - } - $cursorpos =~ s/^$spooler!//; - } - next; - } - # Refresh printer list - next if $menuchoice eq '@refresh'; - # Configure CUPS - if ($menuchoice eq '@cupsconfig') { - config_cups($printer, $in, $upNetwork); - next; - } - # Call function to switch to another spooler - if ($menuchoice eq '@spooler') { - $printer->{SPOOLER} = setup_default_spooler($printer, $in, $upNetwork) || $printer->{SPOOLER}; - next; - } - # Add a new print queue - if ($menuchoice eq '@addprinter') { - $newcursorpos = add_printer($printer, $in, $upNetwork); - } - # Edit an existing print queue - if ($menuchoice =~ /!([^\s!:]+):[^!]*$/) { - # Rip the queue name out of the chosen menu entry - $queue = $1; - # Save the cursor position - $cursorpos = $menuchoice; - # Edit the queue - edit_printer($printer, $in, $upNetwork, $queue); - $newcursorpos = 1; - } - #- Close printerdrake - $menuchoice eq '@quit' and last; - - if ($newcursorpos) { - # Set the cursor onto the current menu entry - $queue = $printer->{QUEUE}; - if ($queue) { - # Make sure that the cursor is still at the same position - # in the main menu when one has modified something on the - # current printer - if (!$printer->{configured}{$printer->{QUEUE}}) { - my $s1 = N(" (Default)"); - my $s2 = $s1; - $s2 =~ s/\(/\\(/; - $s2 =~ s/\)/\\)/; - $cursorpos .= $s1 - if $printer->{QUEUE} eq - $printer->{DEFAULT} && $cursorpos !~ /$s2/; - } else { - $cursorpos = - $printer->{configured}{$queue}{queuedata}{menuentry} . - ($queue eq $printer->{DEFAULT} ? - N(" (Default)") : ''); - } - } else { - $cursorpos = "::"; - } - } else { - delete($printer->{QUEUE}); - } - } -} - -sub add_printer { - - my ($printer, $in, $upNetwork) = @_; - - # The add-printer wizard of printerdrake, adds a queue for a local - # or remote printer interactively - - # Tell subroutines that we add a new printer - $printer->{NEW} = 1; - - # Default printer name, we do not use "lp" so that one can - # switch the default printer under LPD without needing to - # rename another printer. Under LPD the alias "lp" will be - # given to the default printer. - my $defaultprname = N("Printer"); - - # Determine a default name for a new printer queue - my %queues; - @queues{map { split '\|', $_ } keys %{$printer->{configured}}} = (); - my $i = ''; - while ($i < 99999) { - last unless exists $queues{"$defaultprname$i"}; - $i ++; - } - my $queue = "$defaultprname$i"; - - #- Set default values for a new queue - $printer_type_inv{$printer->{TYPE}} or - $printer->{TYPE} = printer::default::printer_type(); - $printer->{currentqueue} = { queue => $queue, - foomatic => 0, - desc => "", - loc => "", - make => "", - model => "", - printer => "", - driver => "", - connect => "", - spooler => $printer->{SPOOLER}, - }; - #- Set OLD_QUEUE field so that the subroutines for the - #- configuration work correctly. - $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue; - #- Do all the configuration steps for a new queue - step_0: - #if (!$::isEmbedded && !$::isInstall && - if ((!$::isInstall) && - $in->isa('interactive::gtk')) { - # Enter wizard mode - $::Wizard_pix_up = "printerdrake.png"; - $::Wizard_title = N("Add a new printer"); - $::isWizard = 1; - # Wizard welcome screen - $::Wizard_no_previous = 1; - undef $::Wizard_no_cancel; undef $::Wizard_finished; - wizard_welcome($printer, $in, $upNetwork) or do { - wizard_close($in, 0); - return 0; - }; - undef $::Wizard_no_previous; - eval { - #do { - # eval to catch wizard cancel. The wizard stuff - # should be in a separate function with steps. see - # drakgw. - $printer->{expert} or $printer->{TYPE} = "LOCAL"; - step_1: - !$printer->{expert} or choose_printer_type($printer, $in, $upNetwork) or - goto step_0; - step_2: - setup_printer_connection($printer, $in, $upNetwork) or - do { - goto step_1 if $printer->{expert}; - goto step_0; - }; - step_3: - if ($printer->{expert} || $printer->{MANUAL} || - $printer->{MORETHANONE}) { - choose_printer_name($printer, $in) or - goto step_2; - } - get_db_entry($printer, $in); - step_3_9: - if (!$printer->{expert} && !$printer->{MANUAL}) { - is_model_correct($printer, $in) or do { - goto step_3 if $printer->{MORETHANONE}; - goto step_2; - } - } - step_4: - # Remember DB entry for "Previous" button in wizard - my $dbentry = $printer->{DBENTRY}; - if ($printer->{expert} || $printer->{MANUAL} || - $printer->{MANUALMODEL}) { - choose_model($printer, $in) or do { - # Restore DB entry - $printer->{DBENTRY} = $dbentry; - goto step_3_9 if $printer->{MANUALMODEL}; - goto step_3; - }; - } - get_printer_info($printer, $in) or return 0; - step_5: - setup_options($printer, $in) or - goto step_4; - configure_queue($printer, $in) or die 'wizcancel'; - undef $printer->{MANUAL} if $printer->{MANUAL}; - $::Wizard_no_previous = 1; - setasdefault($printer, $in); - my $_w = $in->wait_message(N("Printerdrake"), - N("Configuring applications...")); - printer::main::configureapplications($printer); - undef $_w; - my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork); - if ($testpages == 1) { - # User was content with test pages - # Leave wizard mode with congratulations screen - wizard_close($in, 1); - } elsif ($testpages == 2) { - # User was not content with test pages - # Leave wizard mode without congratulations - # screen - wizard_close($in, 0); - $queue = $printer->{QUEUE}; - edit_printer($printer, $in, $upNetwork, $queue); - return 1; - } - }; - wizard_close($in, 0) if $@ =~ /wizcancel/; - } else { - $printer->{expert} or $printer->{TYPE} = "LOCAL"; - wizard_welcome($printer, $in, $upNetwork) or return 0; - !$printer->{expert} or choose_printer_type($printer, $in, $upNetwork) or return 0; - setup_printer_connection($printer, $in, $upNetwork) or return 0; - if ($printer->{expert} || $printer->{MANUAL} || - $printer->{MORETHANONE}) { - choose_printer_name($printer, $in) or return 0; - } - get_db_entry($printer, $in); - if (!$printer->{expert} && !$printer->{MANUAL}) { - is_model_correct($printer, $in) or return 0; - } - if ($printer->{expert} || $printer->{MANUAL} || - $printer->{MANUALMODEL}) { - choose_model($printer, $in) or return 0; - } - get_printer_info($printer, $in) or return 0; - setup_options($printer, $in) or return 0; - configure_queue($printer, $in) or return 0; - undef $printer->{MANUAL} if $printer->{MANUAL}; - setasdefault($printer, $in); - # Configure the current printer queue in applications - my $_w = $in->wait_message(N("Printerdrake"), - N("Configuring applications...")); - printer::main::configureapplications($printer); - undef $_w; - my $testpages = print_testpages($printer, $in, $printer->{TYPE} !~ /LOCAL/ && $upNetwork); - if ($testpages == 2) { - # User was not content with test pages - $queue = $printer->{QUEUE}; - edit_printer($printer, $in, $upNetwork, $queue); - return 1; - } - }; - - # Delete some variables - cleanup($printer); - - return 1; -} - -sub edit_printer { - - my ($printer, $in, $upNetwork, $queue) = @_; - - # The menu for doing modifications on an existing print queue - - # If one, we have to update the application configuration (GIMP, - # StarOffice, ...) - my $configapps = 0; - - # Cursor position in queue modification window - my $modify = N("Printer options"); - - # Tell subroutines that we modify the printer - $printer->{NEW} = 0; - - while (defined($printer->{QUEUE}) || - defined($queue)) { # Do not when current queue - # is deleted - # Modify a queue, ask which part should be modified -# $in->set_help('modifyPrinterMenu') if $::isInstall; - # Get some info to display - my $infoline; - if ($printer->{configured}{$queue}) { - # Here we must regenerate the menu entry, because the - # parameters can be changed. - printer::main::make_menuentry($printer,$queue); - if ($printer->{configured}{$queue}{queuedata}{menuentry} =~ - /!([^!]+)$/) { - $infoline = $1 . - ($queue eq $printer->{DEFAULT} ? N(" (Default)") : '') . - ($printer->{configured}{$queue}{queuedata}{desc} ? - ", Descr.: $printer->{configured}{$queue}{queuedata}{desc}" : '') . - ($printer->{configured}{$queue}{queuedata}{loc} ? - ", Loc.: $printer->{configured}{$queue}{queuedata}{loc}" : '') . - ($printer->{expert} ? - ", Driver: $printer->{configured}{$queue}{queuedata}{driver}" : ''); - } - } else { - # Extract the entry for a remote CUPS queue from the menu entry - # for it. - my $menuentry = find { /!$queue:[^!]*$/ } printer::cups::get_formatted_remote_queues($printer); - $infoline = $1 if $menuentry =~ /!([^!]+)$/; - } - # Mark the printer queue which we edit - $printer->{QUEUE} = $queue; - if ($in->ask_from_( - { title => N("Modify printer configuration"), - messages => - N("Printer %s -What do you want to modify on this printer?", - $infoline), - cancel => N("Close"), - ok => N("Do it!") - }, - [ { val => \$modify, format => \&translate, - type => 'list', - list => [ ($printer->{configured}{$queue} ? - (N("Printer connection type"), - N("Printer name, description, location"), - ($printer->{expert} ? - N("Printer manufacturer, model, driver") : - N("Printer manufacturer, model")), - if_($printer->{configured}{$queue}{queuedata}{make} ne "" && - $printer->{configured}{$queue}{queuedata}{model} ne N("Unknown model") && - $printer->{configured}{$queue}{queuedata}{model} ne N("Raw printer"), - N("Printer options"))) : ()), - if_($queue ne $printer->{DEFAULT}, - N("Set this printer as the default")), - if_(!$printer->{configured}{$queue}, - N("Add this printer to Star Office/OpenOffice.org/GIMP"), - N("Remove this printer from Star Office/OpenOffice.org/GIMP")), - N("Print test pages"), - N("Learn how to use this printer"), - if_($printer->{configured}{$queue}, N("Remove printer")) ] } ])) { - - #- Copy the queue data and work on the copy - $printer->{currentqueue} = {}; - my $driver; - if ($printer->{configured}{$queue}) { - printer::main::copy_printer_params($printer->{configured}{$queue}{queuedata}, $printer->{currentqueue}); - #- Keep in mind the printer driver which was - #- used, so it can be determined whether the - #- driver is only available in expert and so - #- for setting the options for the driver in - #- recommended mode a special treatment has - #- to be applied. - $driver = $printer->{currentqueue}{driver}; - } - #- keep in mind old name of queue (in case of changing) - $printer->{OLD_QUEUE} = $printer->{QUEUE} = $queue; - #- Reset some variables - $printer->{OLD_CHOICE} = undef; - $printer->{DBENTRY} = undef; - #- Which printer type did we have before (check - #- beginning of URI) - if ($printer->{configured}{$queue}) { - if ($printer->{currentqueue}{connect} =~ m!^ptal://?hpjd!) { - $printer->{TYPE} = "socket"; - } else { - foreach my $type (qw(file parallel serial usb ptal - mtink lpd socket smb ncp - postpipe)) { - if ($printer->{currentqueue}{connect} =~ - /^$type:/) { - $printer->{TYPE} = - ($type =~ - /(file|parallel|serial|usb|ptal|mtink)/ ? - 'LOCAL' : uc($type)); - last; - } - } - } - } - - # Do the chosen task - if ($modify eq N("Printer connection type")) { - choose_printer_type($printer, $in, $upNetwork) && - setup_printer_connection($printer, $in, $upNetwork) && - configure_queue($printer, $in); - } elsif ($modify eq N("Printer name, description, location")) { - choose_printer_name($printer, $in) && - configure_queue($printer, $in) && - ($configapps = 1); - # Delete old queue when it was renamed - if (lc($printer->{QUEUE}) ne lc($printer->{OLD_QUEUE})) { - my $_w = $in->wait_message - (N("Printerdrake"), - N("Removing old printer \"%s\"...", - $printer->{OLD_QUEUE})); - printer::main::remove_queue($printer, $printer->{OLD_QUEUE}); - # If the default printer was renamed, correct the - # the default printer setting of the spooler - if ($queue eq $printer->{DEFAULT}) { - $printer->{DEFAULT} = $printer->{QUEUE}; - printer::default::set_printer($printer); - } - $queue = $printer->{QUEUE}; - } - } elsif ($modify eq N("Printer manufacturer, model, driver") || - $modify eq N("Printer manufacturer, model")) { - get_db_entry($printer, $in); - choose_model($printer, $in) && - get_printer_info($printer, $in) && - setup_options($printer, $in) && - configure_queue($printer, $in) && - ($configapps = 1); - } elsif ($modify eq N("Printer options")) { - get_printer_info($printer, $in) && - setup_options($printer, $in) && - configure_queue($printer, $in); - } elsif ($modify eq N("Set this printer as the default")) { - default_printer($printer, $in, $queue); - $configapps = 1; - # The "Set this printer as the default" menu entry will - # disappear if the printer is the default, so go back to the - # default entry - $modify = N("Printer options"); - } elsif ($modify eq N("Add this printer to Star Office/OpenOffice.org/GIMP")) { - $in->ask_warn(N("Adding printer to Star Office/OpenOffice.org/GIMP"), - printer::main::addcupsremotetoapplications($printer, $queue) ? - N("The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP.", $queue) : - N("Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP.", $queue)); - } elsif ($modify eq N("Remove this printer from Star Office/OpenOffice.org/GIMP")) { - $in->ask_warn(N("Removing printer from Star Office/OpenOffice.org/GIMP"), - printer::main::removeprinterfromapplications($printer, $queue) ? - N("The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/GIMP.", $queue) : - N("Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP.", $queue)); - } elsif ($modify eq N("Print test pages")) { - print_testpages($printer, $in, $upNetwork); - } elsif ($modify eq N("Learn how to use this printer")) { - printer_help($printer, $in); - } elsif ($modify eq N("Remove printer")) { - if (remove_printer($printer, $in, $queue)) { - $configapps = 1; - # Let the main menu cursor go to the default - # position - delete $printer->{QUEUE}; - undef $queue; - } - } - - # Configure the current printer queue in applications - if ($configapps) { - my $_w = - $in->wait_message(N("Printerdrake"), - N("Configuring applications...")); - printer::main::configureapplications($printer); - } - # Delete some variables - cleanup($printer); - } else { - # User closed the dialog - - # Delete some variables - cleanup($printer); - - last; - } - } -} - -sub remove_printer { - - my ($printer, $in, $queue) = @_; - - # Asks the user whether he really wants to remove the selected printer - # and, if yes, removes it. The default printer will be reassigned if - # needed. - - if ($in->ask_yesorno - (N("Warning"), N("Do you really want to remove the printer \"%s\"?", $queue), - 1)) { - my $_w = $in->wait_message - (N("Printerdrake"), - N("Removing printer \"%s\"...", $queue)); - if (printer::main::remove_queue($printer, $queue)) { - # Define a new default printer if we have - # removed the default one - if ($queue eq $printer->{DEFAULT}) { - my @k = sort(keys %{$printer->{configured}}); - $printer->{DEFAULT} = $k[0]; - printer::default::set_printer($printer) if @k; - } - return 1; - } - } - return 0; -} - -sub default_printer { - - my ($printer, $in, $queue) = @_; - - # Makes the given queue the default queue and gives an information - # message - - $printer->{DEFAULT} = $queue; - printer::default::set_printer($printer); - $in->ask_warn(N("Default printer"), - N("The printer \"%s\" is set as the default printer now.", - $queue)); - return 1; -} - -sub cleanup { - my ($printer) = @_; - # Clean up the $printer data structure after printer manipulations - foreach (qw(OLD_QUEUE TYPE str_type DBENTRY ARGS - OLD_CHOICE MANUAL)) { - delete($printer->{$_}); - } - $printer->{currentqueue} = {}; - $printer->{complete} = 0; -} - -sub final_cleanup { - my ($printer) = @_; - # Clean up the $printer data structure for auto-install log - foreach my $queue (keys %{$printer->{configured}}) { - foreach my $item (keys %{$printer->{configured}{$queue}}) { - delete($printer->{configured}{$queue}{$item}) if $item ne "queuedata"; - } - delete($printer->{configured}{$queue}{queuedata}{menuentry}); - } - foreach (qw(Old_queue OLD_QUEUE QUEUE TYPE str_type currentqueue DBENTRY ARGS complete OLD_CHOICE NEW MORETHANONE MANUALMODEL AUTODETECT AUTODETECTLOCAL AUTODETECTNETWORK AUTODETECTSMB noninteractive expert)) - { delete $printer->{$_} }; -} - diff --git a/perl-install/printer/services.pm b/perl-install/printer/services.pm deleted file mode 100644 index adb2587fe..000000000 --- a/perl-install/printer/services.pm +++ /dev/null @@ -1,61 +0,0 @@ -package printer::services; - -use strict; -use services; -use run_program; - -sub restart ($) { - my ($service) = @_; - if (services::restart($service)) { - # CUPS needs some time to come up. - wait_for_cups() if $service eq "cups"; - return 1; - } else { return 0 } -} - -sub start ($) { - my ($service) = @_; - if (services::start($service)) { - # CUPS needs some time to come up. - wait_for_cups() if $service eq "cups"; - return 1; - } else { return 0 } -} - -sub start_not_running_service ($) { - my ($service) = @_; - # The exit status is not zero when the service is not running - if (services::start_not_running_service($service)) { - return 0; - } else { - run_program::rooted($::prefix, "/etc/rc.d/init.d/$service", "start"); - if (($? >> 8) != 0) { - return 0; - } else { - # CUPS needs some time to come up. - wait_for_cups() if $service eq "cups"; - return 1; - } - } -} - -sub wait_for_cups() { - # CUPS needs some time to come up. Wait up to 30 seconds, checking - # whether CUPS is ready. - my $cupsready = 0; - my $i; - for ($i = 0; $i < 30; $i++) { - run_program::rooted($::prefix, "/usr/bin/lpstat", "-r"); - if (($? >> 8) != 0) { - # CUPS is not ready, continue - sleep 1; - } else { - # CUPS is ready, quit - $cupsready = 1; - last; - } - } - return $cupsready; -} - -1; |