summaryrefslogtreecommitdiffstats
path: root/perl-install/printer
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/printer')
-rw-r--r--perl-install/printer/main.pm167
-rw-r--r--perl-install/printer/printerdrake.pm287
2 files changed, 347 insertions, 107 deletions
diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
index 796a72e88..fbbdd28c3 100644
--- a/perl-install/printer/main.pm
+++ b/perl-install/printer/main.pm
@@ -39,6 +39,8 @@ our %printer_type_inv = reverse %printer_type;
our %thedb;
+our $hplipdevicesdb;
+
#------------------------------------------------------------------------------
sub spooler() {
@@ -355,6 +357,17 @@ sub make_menuentry {
$connection = N(", USB printer #%s", $number);
} elsif ($connect =~ m!^usb://!) {
$connection = N(", USB printer");
+ } elsif ($connect =~ m!^hp:/(.+?)$!) {
+ my $hplipdevice = $1;
+ if ($hplipdevice =~ m!^par/!) {
+ $connection = N(", HP printer on a parallel port");
+ } elsif ($hplipdevice =~ m!^usb/!) {
+ $connection = N(", HP printer on USB");
+ } elsif ($hplipdevice =~ m!^net/!) {
+ $connection = N(", HP printer on HP JetDirect");
+ } else {
+ $connection = N(", HP printer");
+ }
} elsif ($connect =~ m!^ptal://?(.+?)$!) {
my $ptaldevice = $1;
if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
@@ -412,6 +425,17 @@ sub connectionstr {
$connection = N("USB printer #%s", $number);
} elsif ($connect =~ m!^usb://!) {
$connection = N("USB printer");
+ } elsif ($connect =~ m!^hp:/(.+?)$!) {
+ my $hplipdevice = $1;
+ if ($hplipdevice =~ m!^par/!) {
+ $connection = N("HP printer on a parallel port");
+ } elsif ($hplipdevice =~ m!^usb/!) {
+ $connection = N("HP printer on USB");
+ } elsif ($hplipdevice =~ m!^net/!) {
+ $connection = N("HP printer on HP JetDirect");
+ } else {
+ $connection = N("HP printer");
+ }
} elsif ($connect =~ m!^ptal://?(.+?)$!) {
my $ptaldevice = $1;
if ($ptaldevice =~ /^mlc:par:(\d+)$/) {
@@ -2117,7 +2141,7 @@ sub get_copiable_queues {
if ($entry->{foomatic} && $entry->{spooler} eq $oldspooler) {
# Is the connection type supported by the new
# spooler?
- if ($newspooler eq "cups" && $entry->{connect} =~ /^(file|ptal|lpd|socket|smb|ipp):/ ||
+ if ($newspooler eq "cups" && $entry->{connect} =~ /^(file|hp|ptal|lpd|socket|smb|ipp):/ ||
$newspooler =~ /^(lpd|lprng)$/ && $entry->{connect} =~ /^(file|ptal|lpd|socket|smb|ncp|postpipe):/ ||
$newspooler eq "pdq" && $entry->{connect} =~ /^(file|ptal|lpd|socket):/) {
push(@queuelist, $entry->{name});
@@ -2198,6 +2222,27 @@ sub autodetectionentry_for_uri {
return $p;
}
}
+ } elsif ($uri =~ m!^hp:/(usb|par)/!) {
+ # HP printer (controlled by HPLIP)
+ my $hplipdevice = $uri;
+ $hplipdevice =~ m!^hp:/(usb|par)/(\S+?)(\?serial=(\S+)|)$!;
+ my $model = $2;
+ my $serial = $4;
+ $model =~ s/_/ /g;
+ foreach my $p (@autodetected) {
+ next if !$p->{val}{MODEL};
+ if (uc($p->{val}{MODEL}) ne uc($model)) {
+ my $entry = hplip_device_entry($p->{port}, @autodetected);
+ next if !$entry;
+ my $m = $entry->{model};
+ $m =~ s/_/ /g;
+ next if uc($m) ne uc($model);
+ }
+ next if ($serial && !$p->{val}{SERIALNUMBER}) ||
+ (!$serial && $p->{val}{SERIALNUMBER}) ||
+ (uc($serial) ne uc($p->{val}{SERIALNUMBER}));
+ return $p;
+ }
} elsif ($uri =~ m!^ptal://?mlc:!) {
# HP multi-function device (controlled by HPOJ)
my $ptaldevice = $uri;
@@ -2352,6 +2397,108 @@ sub read_hplip_db {
return \%hplipdevices;
}
+sub hplip_simple_model {
+ my ($model) = @_;
+ my $simplemodel = $model;
+ $simplemodel =~ s/[^A-Za-z0-9]//g;
+ $simplemodel =~ s/(DeskJet\d+C?)([a-z]*?)/$1/gi;
+ $simplemodel =~ s/((LaserJet|OfficeJet|PhotoSmart|PSC)\d+)([a-z]*?)/$1/gi;
+ $simplemodel =~ s/DeskJet/DJ/gi;
+ $simplemodel =~ s/PhotoSmartP/PhotoSmart/gi;
+ $simplemodel =~ s/LaserJet/LJ/gi;
+ $simplemodel =~ s/OfficeJet/OJ/gi;
+ $simplemodel =~ s/Series//gi;
+ $simplemodel = uc($simplemodel);
+ return $simplemodel;
+}
+
+sub hplip_device_entry {
+ my ($device, @autodetected) = @_;
+
+ # Currently, only devices on USB work
+ return undef if $device !~ /usb/i;
+
+ if (!$hplipdevicesdb) {
+ # Read the HPLIP device database if not done already
+ $hplipdevicesdb = read_hplip_db();
+ }
+
+ my $entry;
+ foreach my $a (@autodetected) {
+ $device eq $a->{port} or next;
+ # Only HP devices supported
+ return undef if $a->{val}{MANUFACTURER} !~ /^\s*HP\s*$/i;
+ my $modelstr = $a->{val}{MODEL};
+ $modelstr =~ s/ /_/g;
+ if ($entry = $hplipdevicesdb->{$modelstr}) {
+ # Exact match
+ return $entry;
+ }
+ # More 'fuzzy' matching
+ my $simplemodel = hplip_simple_model($modelstr);
+ foreach my $key (keys %{$hplipdevicesdb}) {
+ my $simplekey = hplip_simple_model($key);
+ return $hplipdevicesdb->{$key} if $simplemodel eq $simplekey;
+ }
+ foreach my $key (keys %{$hplipdevicesdb}) {
+ my $simplekey = hplip_simple_model($key);
+ $simplekey =~ s/(\d\d)00(C?)$/$1\\d\\d$2/;
+ $simplekey =~ s/(\d\d\d)0(C?)$/$1\\d$2/;
+ $simplekey =~ s/(\d\d)0(\dC?)$/$1\\d$2/;
+ return $hplipdevicesdb->{$key} if
+ $simplemodel =~ m/^$simplekey$/;
+ }
+ # Device not supported
+ return undef;
+ }
+ # $device not in @autodetected
+ return undef;
+}
+
+sub start_hplip {
+ my ($device, $hplipentry, @autodetected) = @_;
+
+ # Determine connection type
+ my $bus;
+ if ($device =~ /usb/) {
+ $bus = "usb";
+ } elsif ($device =~ /par/ ||
+ $device =~ m!/dev/lp! ||
+ $device =~ /printers/) {
+ $bus = "par";
+ } else {
+ return undef;
+ }
+
+ # Start HPLIP daemons
+ printer::services::start_not_running_service("hplip");
+
+ # Determine HPLIP device URI for the CUPS queue
+ foreach my $a (@autodetected) {
+ $device eq $a->{port} or next;
+ open(my $F, ($::testing ? $::prefix : "chroot $::prefix/ ") .
+ '/bin/sh -c "export LC_ALL=C; /usr/lib/cups/backend/hp" |') or
+ die 'Could not run "/usr/lib/cups/backend/hp"!';
+ while (my $line = <$F>) {
+ if (($line =~ m!^direct\s+(hp:/$bus/(\S+)\?serial=(\S+))\s+!) ||
+ ($line =~ m!^direct\s+(hp:/$bus/(\S+))\s+!)) {
+ my $uri = $1;
+ my $modelstr = $2;
+ my $serial = $3;
+ if ((uc($modelstr) eq uc($hplipentry->{model})) &&
+ (!$serial ||
+ (uc($serial) eq uc($a->{val}{SERIALNUMBER})))) {
+ close $F;
+ return $uri;
+ }
+ }
+ }
+ close $F;
+ last;
+ }
+ # HPLIP URI not found
+ return undef;
+}
sub configure_hpoj {
my ($device, @autodetected) = @_;
@@ -2787,13 +2934,19 @@ sub usbdevice {
return sprintf("%%%03d%%%03d", $bus, $device);
}
-sub config_sane() {
- # Add HPOJ backend to /etc/sane.d/dll.conf if needed (no individual
- # config file /etc/sane.d/hpoj.conf necessary, the HPOJ driver finds the
- # scanner automatically)
+sub config_sane {
+ my ($backend) = $_;
+
+ # Add HPOJ/HPLIP backend to /etc/sane.d/dll.conf if needed (no
+ # individual config file /etc/sane.d/hplip.conf or
+ # /etc/sane.d/hpoj.conf necessary, the HPLIP and HPOJ drivers find
+ # the scanner automatically)
+
return if (! -f "$::prefix/etc/sane.d/dll.conf");
- return if member("hpoj", chomp_(cat_("$::prefix/etc/sane.d/dll.conf")));
- eval { append_to_file("$::prefix/etc/sane.d/dll.conf", "hpoj\n") } or
+ return if member($backend,
+ chomp_(cat_("$::prefix/etc/sane.d/dll.conf")));
+ eval { append_to_file("$::prefix/etc/sane.d/dll.conf",
+ "$backend\n") } or
die "can not write SANE config in /etc/sane.d/dll.conf: $!";
}
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index 4ab78852f..5e47c4672 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -1912,6 +1912,9 @@ list => [ if_($printer->{currentqueue}{connect},
"socket://",
"ptal:/mlc:",
"ptal:/hpjd:",
+ "hp:/usb/",
+ "hp:/par/",
+ "hp:/net/",
"file:/",
'postpipe:""')),
], not_edit => 0, sort => 0 }, ],
@@ -1925,7 +1928,7 @@ complete => sub {
);
# Non-local printer, check network and abort if no network available
- if ($printer->{currentqueue}{connect} !~ m!^(file|parallel|usb|serial|mtink|ptal://?mlc):/! &&
+ if ($printer->{currentqueue}{connect} !~ m!^(file:|parallel:|usb:|serial:|mtink:|ptal://?mlc|hp:/(usb|par))! &&
!check_network($printer, $in, $upNetwork, 0)) {
return 0;
# If the chosen protocol needs additional software, install it.
@@ -2046,6 +2049,7 @@ sub setup_common {
#- Check whether the printer is an HP multi-function device and
#- configure HPOJ if it is one
+ my $hplipdevice = "";
my $ptaldevice = "";
my $isHPOJ = 0;
my $w;
@@ -2062,77 +2066,57 @@ sub setup_common {
N("Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, LaserJet 1100/1200/1220/3000/3200/3300/4345 with scanner, DeskJet 450, Sony IJP-V100), an HP PhotoSmart or an HP LaserJet 2200?"), 0);
}
}
- if ($makemodel =~ /HP\s+(OfficeJet|PSC|PhotoSmart|LaserJet\s+(1200|1220|2200|30(15|20|30)|3200|33.0|4345)|(DeskJet|dj)\s*450)/i ||
- $makemodel =~ /Sony\s+IJP[\s\-]+V[\s\-]+100/i ||
- $isHPOJ) {
- # Install HPOJ package
- my $hpojinstallfailed = 0;
+ my $hplipentry;
+ if (($printer->{SPOOLER} eq 'cups') &&
+ ($hplipentry =
+ printer::main::hplip_device_entry($device, @autodetected))) {
+ # Device is supported by HPLIP
+
+ # Install HPLIP packages
+ my $hplipinstallfailed = 0;
if (!$::testing &&
- !files_exist(qw(/usr/sbin/ptal-mlcd
- /usr/sbin/ptal-init
- /usr/bin/xojpanel
- /usr/sbin/lsusb))) {
+ !files_exist(qw(/usr/sbin/hpiod))) {
if ($::noX) {
- $hpojinstallfailed = 1;
+ $hplipinstallfailed = 1;
} else {
$w = $in->wait_message(N("Printerdrake"),
- N("Installing HPOJ package..."))
+ N("Installing HPLIP package..."))
if !$printer->{noninteractive};
- $in->do_pkgs->install('hpoj', 'xojpanel', 'usbutils')
+ $in->do_pkgs->install('hplip')
or do {
$in->ask_warn(N("Warning"),
N("Could not install the %s packages!",
- "HPOJ") . " " .
+ "HPLIP") . " " .
N("Only printing will be possible on the %s.",
$makemodel));
- $hpojinstallfailed = 1;
+ $hplipinstallfailed = 1;
};
}
}
- # Configure and start HPOJ
+ # Start HPLIP and get device URI
undef $w;
$w = $in->wait_message(
N("Printerdrake"),
- N("Checking device and configuring HPOJ..."))
+ N("Checking device and configuring HPLIP..."))
if !$printer->{noninteractive};
- eval { $ptaldevice = printer::main::configure_hpoj
- ($device, @autodetected) if !$hpojinstallfailed };
+ $hplipdevice = printer::main::start_hplip
+ ($device, $hplipentry, @autodetected) if
+ !$hplipinstallfailed;
- if (my $err = $@) {
- warn qq(HPOJ conf failure: "$err");
- log::l(qq(HPOJ conf failure: "$err"));
- }
-
- if ($ptaldevice) {
- # HPOJ has determined the device name, make use of it if we
- # did not know it before
- if (!$do_auto_detect ||
- !$makemodel ||
- $makemodel eq $searchunknown ||
- $makemodel =~ /^\s*$/) {
- $makemodel = $ptaldevice;
- $makemodel =~ s/^.*:([^:]+)$/$1/;
- $makemodel =~ s/_/ /g;
- if ($makemodel =~ /^\s*IJP/i) {
- $makemodel = "Sony $makemodel";
- } else {
- $makemodel = "HP $makemodel";
- }
- }
- # Configure scanning with SANE on the MF device
- if ($makemodel !~ /HP\s+PhotoSmart/i &&
- $makemodel !~ /HP\s+LaserJet\s+2200/i &&
- $makemodel !~ /HP\s+(DeskJet|dj)\s*450/i) {
+ if ($hplipdevice) {
+ # Configure scanning with SANE on HP's MF devices
+ if ($hplipentry->{scan}) {
# Install SANE
if (!$::testing &&
(!files_exist(qw(/usr/bin/scanimage
/usr/bin/xscanimage
/etc/sane.d/dll.conf
- /usr/lib/libsane-hpoj.so.1)) ||
+ /usr/lib/libsane-hpaio.so.1)) ||
(!files_exist(qw(/usr/bin/xsane)) &&
!files_exist(qw(/usr/bin/kooka)) &&
- ($::isInstall || !$in->do_pkgs->is_installed('scanner-gui'))))) {
+ ($::isInstall ||
+ !$in->do_pkgs->is_installed('scanner-gui'))))) {
undef $w;
$w = $in->wait_message(
N("Printerdrake"),
@@ -2144,7 +2128,7 @@ sub setup_common {
($::isInstall ?
'xsane' :
'scanner-gui'),
- 'libsane-hpoj1')
+ 'libsane-hpaio1')
or do {
$in->ask_warn(N("Warning"),
N("Could not install the %s packages!",
@@ -2153,77 +2137,180 @@ sub setup_common {
$makemodel));
};
}
- # Configure the HPOJ SANE backend
- printer::main::config_sane();
+ # Configure the HPLIP SANE backend
+ printer::main::config_sane('hpaio');
}
- # Configure photo card access with mtools and MToolsFM
- if (($makemodel =~ /HP\s+PhotoSmart/i ||
- $makemodel =~ /HP\s+PSC\s*9[05]0/i ||
- $makemodel =~ /HP\s+PSC\s*13[15]\d/i ||
- $makemodel =~ /HP\s+PSC\s*161\d/i ||
- $makemodel =~ /HP\s+PSC\s*2\d\d\d/i ||
- $makemodel =~ /HP\s+OfficeJet\s+D\s*1[45]5/i ||
- $makemodel =~ /HP\s+OfficeJet\s+71[34]0/i ||
- $makemodel =~ /HP\s+OfficeJet\s+91\d\d/i ||
- $makemodel =~ /HP\s+(DeskJet|dj)\s*450/i) &&
- $makemodel !~ /HP\s+PhotoSmart\s+7150/i) {
- # Install mtools and MToolsFM
- if (!$::testing &&
- !files_exist(qw(/usr/bin/mdir
- /usr/bin/mcopy
- /usr/bin/MToolsFM
- ))) {
- undef $w;
- $w = $in->wait_message(
- N("Printerdrake"),
- N("Installing mtools packages..."))
+ # Take the DeviceURI from $hplipdevice.
+ $printer->{currentqueue}{connect} = $hplipdevice;
+ }
+ }
+ print "##### 10 |$hplipdevice|\n";
+ if (!$hplipdevice) {
+ if ($makemodel =~ /HP\s+(OfficeJet|PSC|PhotoSmart|LaserJet\s+(1200|1220|2200|30(15|20|30)|3200|33.0|4345)|(DeskJet|dj)\s*450)/i ||
+ $makemodel =~ /Sony\s+IJP[\s\-]+V[\s\-]+100/i ||
+ $isHPOJ) {
+ # Install HPOJ package
+ my $hpojinstallfailed = 0;
+ if (!$::testing &&
+ !files_exist(qw(/usr/sbin/ptal-mlcd
+ /usr/sbin/ptal-init
+ /usr/bin/xojpanel
+ /usr/sbin/lsusb))) {
+ if ($::noX) {
+ $hpojinstallfailed = 1;
+ } else {
+ $w = $in->wait_message(N("Printerdrake"),
+ N("Installing HPOJ package..."))
if !$printer->{noninteractive};
- $::noX
- or $in->do_pkgs->install('mtools', 'mtoolsfm')
+ $in->do_pkgs->install('hpoj', 'xojpanel', 'usbutils')
or do {
$in->ask_warn(N("Warning"),
N("Could not install the %s packages!",
- "Mtools") . " " .
- N("Photo memory card access on the %s will not be possible.",
+ "HPOJ") . " " .
+ N("Only printing will be possible on the %s.",
$makemodel));
+ $hpojinstallfailed = 1;
};
}
- # Configure mtools/MToolsFM for photo card access
- printer::main::config_photocard();
}
+ # Configure and start HPOJ
+ undef $w;
+ $w = $in->wait_message
+ (N("Printerdrake"),
+ N("Checking device and configuring HPOJ..."))
+ if !$printer->{noninteractive};
- if (!$printer->{noninteractive}) {
- my $text = "";
- # Inform user about how to scan with his MF device
- $text = scanner_help($makemodel, "ptal://$ptaldevice");
- if ($text) {
- undef $w;
- $in->ask_warn(
- N("Scanning on your HP multi-function device"),
- $text);
+ eval { $ptaldevice = printer::main::configure_hpoj
+ ($device, @autodetected) if !$hpojinstallfailed };
+
+ if (my $err = $@) {
+ warn qq(HPOJ conf failure: "$err");
+ log::l(qq(HPOJ conf failure: "$err"));
+ }
+
+ if ($ptaldevice) {
+ # HPOJ has determined the device name, make use of
+ # it if we did not know it before
+ if (!$do_auto_detect ||
+ !$makemodel ||
+ $makemodel eq $searchunknown ||
+ $makemodel =~ /^\s*$/) {
+ $makemodel = $ptaldevice;
+ $makemodel =~ s/^.*:([^:]+)$/$1/;
+ $makemodel =~ s/_/ /g;
+ if ($makemodel =~ /^\s*IJP/i) {
+ $makemodel = "Sony $makemodel";
+ } else {
+ $makemodel = "HP $makemodel";
+ }
}
- # Inform user about how to access photo cards with his
- # MF device
- $text = photocard_help($makemodel, "ptal://$ptaldevice");
- if ($text) {
- undef $w;
- $in->ask_warn(N("Photo memory card access on your HP multi-function device"),
- $text);
+ # Configure scanning with SANE on the MF device
+ if ($makemodel !~ /HP\s+PhotoSmart/i &&
+ $makemodel !~ /HP\s+LaserJet\s+2200/i &&
+ $makemodel !~ /HP\s+(DeskJet|dj)\s*450/i) {
+ # Install SANE
+ if (!$::testing &&
+ (!files_exist(qw(/usr/bin/scanimage
+ /usr/bin/xscanimage
+ /etc/sane.d/dll.conf
+ /usr/lib/libsane-hpoj.so.1)) ||
+ (!files_exist(qw(/usr/bin/xsane)) &&
+ !files_exist(qw(/usr/bin/kooka)) &&
+ ($::isInstall ||
+ !$in->do_pkgs->is_installed('scanner-gui'))))) {
+ undef $w;
+ $w = $in->wait_message
+ (N("Printerdrake"),
+ N("Installing SANE packages..."))
+ if !$printer->{noninteractive};
+ $::noX
+ or $in->do_pkgs->install('sane-backends',
+ 'sane-frontends',
+ ($::isInstall ?
+ 'xsane' :
+ 'scanner-gui'),
+ 'libsane-hpoj1')
+ or do {
+ $in->ask_warn(N("Warning"),
+ N("Could not install the %s packages!",
+ "SANE") . " " .
+ N("Scanning on the %s will not be possible.",
+ $makemodel));
+ };
+ }
+ # Configure the HPOJ SANE backend
+ printer::main::config_sane('hpoj');
}
+ # Configure photo card access with mtools and MToolsFM
+ if (($makemodel =~ /HP\s+PhotoSmart/i ||
+ $makemodel =~ /HP\s+PSC\s*9[05]0/i ||
+ $makemodel =~ /HP\s+PSC\s*13[15]\d/i ||
+ $makemodel =~ /HP\s+PSC\s*161\d/i ||
+ $makemodel =~ /HP\s+PSC\s*2\d\d\d/i ||
+ $makemodel =~ /HP\s+OfficeJet\s+D\s*1[45]5/i ||
+ $makemodel =~ /HP\s+OfficeJet\s+71[34]0/i ||
+ $makemodel =~ /HP\s+OfficeJet\s+91\d\d/i ||
+ $makemodel =~ /HP\s+(DeskJet|dj)\s*450/i) &&
+ $makemodel !~ /HP\s+PhotoSmart\s+7150/i) {
+ # Install mtools and MToolsFM
+ if (!$::testing &&
+ !files_exist(qw(/usr/bin/mdir
+ /usr/bin/mcopy
+ /usr/bin/MToolsFM
+ ))) {
+ undef $w;
+ $w = $in->wait_message
+ (N("Printerdrake"),
+ N("Installing mtools packages..."))
+ if !$printer->{noninteractive};
+ $::noX
+ or $in->do_pkgs->install('mtools', 'mtoolsfm')
+ or do {
+ $in->ask_warn(N("Warning"),
+ N("Could not install the %s packages!",
+ "Mtools") . " " .
+ N("Photo memory card access on the %s will not be possible.",
+ $makemodel));
+ };
+ }
+ # Configure mtools/MToolsFM for photo card access
+ printer::main::config_photocard();
+ }
+
+ if (!$printer->{noninteractive}) {
+ my $text = "";
+ # Inform user about how to scan with his MF device
+ $text = scanner_help($makemodel, "ptal://$ptaldevice");
+ if ($text) {
+ undef $w;
+ $in->ask_warn
+ (N("Scanning on your HP multi-function device"),
+ $text);
+ }
+ # Inform user about how to access photo cards with his
+ # MF device
+ $text = photocard_help($makemodel, "ptal://$ptaldevice");
+ if ($text) {
+ undef $w;
+ $in->ask_warn(N("Photo memory card access on your HP multi-function device"),
+ $text);
+ }
+ }
+ # make the DeviceURI from $ptaldevice.
+ $printer->{currentqueue}{connect} =
+ "ptal://" . $ptaldevice;
+ } else {
+ # make the DeviceURI from $device.
+ $printer->{currentqueue}{connect} = $device;
}
- # make the DeviceURI from $ptaldevice.
- $printer->{currentqueue}{connect} = "ptal://" . $ptaldevice;
} else {
# make the DeviceURI from $device.
$printer->{currentqueue}{connect} = $device;
}
$w = $in->wait_message(
N("Printerdrake"),
- N("Checking device and configuring HPOJ..."))
+ N("Configuring device..."))
if !$printer->{noninteractive} && !defined($w);
- } else {
- # make the DeviceURI from $device.
- $printer->{currentqueue}{connect} = $device;
}
} else {
# make the DeviceURI from $device.
@@ -4800,14 +4887,14 @@ What do you want to modify on this printer?",
if ($printer->{currentqueue}{connect} =~ m!^ptal://?hpjd!) {
$printer->{TYPE} = "socket";
} else {
- foreach my $type (qw(file parallel serial usb ptal
+ foreach my $type (qw(file parallel serial usb ptal hp
mtink lpd socket smb ncp
postpipe)) {
if ($printer->{currentqueue}{connect} =~
/^$type:/) {
$printer->{TYPE} =
($type =~
- /(file|parallel|serial|usb|ptal|mtink)/ ?
+ /(file|parallel|serial|usb|ptal|hp|mtink)/ ?
'LOCAL' : uc($type));
last;
}
generated by cgit v1.2.1 (git 2.21.0) at 2024-11-08 02:01:07 +0000