2 files changed, 113 insertions, 4 deletions

diff --git a/perl-install/printer/main.pm b/perl-install/printer/main.pm
index 73537f25e..78085b39e 100644
--- a/perl-install/printer/main.pm
+++ b/perl-install/printer/main.pm
@@ -689,8 +689,6 @@ sub read_ppd_options ($) {
     return $COMBODATA->{args};
 }
 
-my %sysconfig = getVarsFromSh("$::prefix/etc/sysconfig/printing");
-
 sub set_cups_special_options {
     my ($queue) = @_;
     # Set some special CUPS options
@@ -714,6 +712,8 @@ sub set_cups_special_options {
     return 1;
 }
 
+my %sysconfig = getVarsFromSh("$::prefix/etc/sysconfig/printing");
+
 sub set_cups_autoconf {
     my ($autoconf) = @_;
     $sysconfig{CUPS_CONFIG} = $autoconf ? "automatic" : "manual";
@@ -734,6 +734,52 @@ sub set_usermode {
 
 sub get_usermode() { $sysconfig{USER_MODE} eq 'expert' ? 1 : 0 }
 
+sub set_auto_admin {
+    my ($printer) = @_;
+    $sysconfig{ENABLE_QUEUES_ON_PRINTER_CONNECTED} = 
+	$printer->{enablequeuesonnewprinter} ? "yes" : "no";
+    $sysconfig{AUTO_SETUP_QUEUES_ON_PRINTER_CONNECTED} = 
+	$printer->{autoqueuesetuponnewprinter} ? "yes" : "no";
+    $sysconfig{ENABLE_QUEUES_ON_SPOOLER_START} = 
+	$printer->{enablequeuesonspoolerstart} ? "yes" : "no";
+    $sysconfig{AUTO_SETUP_QUEUES_ON_SPOOLER_START} = 
+	$printer->{autoqueuesetuponspoolerstart} ? "yes" : "no";
+    $sysconfig{AUTO_SETUP_QUEUES_ON_PRINTERDRAKE_START} = 
+	$printer->{autoqueuesetuponstart} ? "yes" : "no";
+    $sysconfig{AUTO_SETUP_QUEUES_MODE} = 
+	$printer->{autoqueuesetupgui} ? "waitforgui" : "nogui";
+    setVarsInSh("$::prefix/etc/sysconfig/printing", \%sysconfig);
+    return 1;
+}
+
+sub get_auto_admin {
+    my ($printer) = @_;
+    $printer->{enablequeuesonnewprinter} = 
+	(!defined($sysconfig{ENABLE_QUEUES_ON_PRINTER_CONNECTED}) ||
+	 ($sysconfig{ENABLE_QUEUES_ON_PRINTER_CONNECTED} =~ /yes/i) ?
+	 1 : 0);
+    $printer->{autoqueuesetuponnewprinter} = 
+	(!defined($sysconfig{AUTO_SETUP_QUEUES_ON_PRINTER_CONNECTED}) ||
+	 ($sysconfig{AUTO_SETUP_QUEUES_ON_PRINTER_CONNECTED} =~ /yes/i) ?
+	 1 : 0);
+    $printer->{enablequeuesonspoolerstart} = 
+	(!defined($sysconfig{ENABLE_QUEUES_ON_SPOOLER_START}) ||
+	 ($sysconfig{ENABLE_QUEUES_ON_SPOOLER_START} =~ /yes/i) ?
+	 1 : 0);
+    $printer->{autoqueuesetuponspoolerstart} = 
+	(!defined($sysconfig{AUTO_SETUP_QUEUES_ON_SPOOLER_START}) ||
+	 ($sysconfig{AUTO_SETUP_QUEUES_ON_SPOOLER_START} =~ /yes/i) ?
+	 1 : 0);
+    $printer->{autoqueuesetuponstart} = 
+	(!defined($sysconfig{AUTO_SETUP_QUEUES_ON_PRINTERDRAKE_START}) ||
+	 ($sysconfig{AUTO_SETUP_QUEUES_ON_PRINTERDRAKE_START} =~ /yes/i) ?
+	 1 : 0);
+    $printer->{autoqueuesetupgui} = 
+	(!defined($sysconfig{AUTO_SETUP_QUEUES_MODE}) ||
+	 ($sysconfig{AUTO_SETUP_QUEUES_MODE} =~ /waitforgui/i) ?
+	 1 : 0);
+}
+
 sub set_jap_textmode {
     my $textmode = ($_[0] ? 'cjk' : '');
     # Do not write mime.convs if the file does not exist, as then
diff --git a/perl-install/printer/printerdrake.pm b/perl-install/printer/printerdrake.pm
index ab1cc4510..f7f22598e 100644
--- a/perl-install/printer/printerdrake.pm
+++ b/perl-install/printer/printerdrake.pm
@@ -600,6 +600,66 @@ N("Examples for correct IPs:\n") .
     return $retvalue;
 }
 
+sub config_auto_admin {
+    my ($printer, $in) = @_;
+
+    local $::isWizard = 0;
+    local $::isEmbedded = 0;
+
+    # Read current configuration
+    printer::main::get_auto_admin($printer);
+
+    # Configuration dialog
+    my $waitforgui =
+	N("Allow pop-up windows, package installation possible");
+    my $nogui =
+	N("No pop-up windows, package installation not possible");
+    my $autoqueuesetupmode =
+	$printer->{autoqueuesetupgui} ? $waitforgui : $nogui;
+    if ($in->ask_from_
+	({ 
+	    title => N("Printer auto administration"),
+	    messages => N("Here you can configure printer administration tasks which should be done automatically."),
+	     },
+	     [
+	      { val => N("Do automatic configuration of new printers") },
+	      { text => N("when a USB printer is connected and turned on"), 
+		type => 'bool',
+		val => \$printer->{autoqueuesetuponnewprinter} },
+	      { text => N("when the printing system is started"), 
+		type => 'bool',
+		val => \$printer->{autoqueuesetuponspoolerstart} },
+	      { text => N("when Printerdrake is started"), 
+		type => 'bool',
+		val => \$printer->{autoqueuesetuponstart} },
+	      { val => N("Mode for automatic printer setup:") },
+	      { val => \$autoqueuesetupmode,
+		list => [ $waitforgui, $nogui ], 
+		not_edit => 1, sort => 0,
+		type => 'list' },
+	      { val => N("Re-enable disabled printers") },
+	      { text => N("when a USB printer is connected and turned on"), 
+		type => 'bool',
+		val => \$printer->{enablequeuesonnewprinter} },
+	      { text => N("when the printing system is started"), 
+		type => 'bool',
+		val => \$printer->{enablequeuesonspoolerstart} },
+	      ]
+	     )
+	    ) {
+	# Auto queue setup mode
+	$printer->{autoqueuesetupgui} =
+	    ($autoqueuesetupmode eq $waitforgui ? 1 : 0);
+	# Save new settings
+	printer::main::set_auto_admin($printer);
+	return 1;
+    } else {
+	# Reset original settings
+	printer::main::get_auto_admin($printer);
+	return 0;
+    }
+}
+
 sub choose_printer_type {
     my ($printer, $in, $upNetwork) = @_;
     my $havelocalnetworks = check_network($printer, $in, $upNetwork, 1) &&
@@ -4683,13 +4743,16 @@ sub init {
     # Save the user mode, so that the same one is used on the next start
     # of Printerdrake
     printer::main::set_usermode($printer->{expert});
-    
+
+    # Get the settings for printer auto administration
+    printer::main::get_auto_admin($printer);
+
     # only experts should be asked for the spooler also for background
     # installation of print it should not be asked for the spooler,
     # as this feature is only supported for CUPS.
     $printer->{SPOOLER} ||= 'cups'
 	if (!$printer->{expert} || $::noX || $::autoqueue) && !$::isInstall;
-    
+
     # If we have chosen a spooler, install it and mark it as default 
     # spooler. Spooler installation is ommitted on background queue
     # installation, because this only works when CUPS is already running