1 files changed, 133 insertions, 0 deletions
diff --git a/perl-install/partition_table_bsd.pm b/perl-install/partition_table_bsd.pm
new file mode 100644
index 000000000..0b03249c1
--- /dev/null
+++ b/perl-install/partition_table_bsd.pm
@@ -0,0 +1,133 @@
+package partition_table_bsd;
+
+use diagnostics;
+use strict;
+use vars qw(@ISA);
+
+@ISA = qw(partition_table_raw);
+
+use common qw(:common :system :file :functional);
+use partition_table_raw;
+use partition_table;
+use c;
+
+#- very bad and rough handling :(
+my %typeToDos = (
+  8 => 0x83,
+  1 => 0x82,
+);
+my %typeFromDos = reverse %typeToDos;
+
+my ($main_format, $main_fields) = list2kv(
+  I   => 'magic',
+  S   => 'type',
+  S   => 'subtype',
+  a16 => 'typename',
+  a16 => 'packname',
+  I   => 'secsize',
+  I   => 'nsectors',
+  I   => 'ntracks',
+  I   => 'ncylinders',
+  I   => 'secpercyl',
+  I   => 'secprtunit',
+  S   => 'sparespertrack',
+  S   => 'sparespercyl',
+  I   => 'acylinders',
+  S   => 'rpm',
+  S   => 'interleave',
+  S   => 'trackskew',
+  S   => 'cylskew',
+  I   => 'headswitch',
+  I   => 'trkseek',
+  I   => 'flags',
+  a20 => 'drivedata',
+  a20 => 'spare',
+  I   => 'magic2',
+  S   => 'checksum',
+  S   => 'npartitions',
+  I   => 'bbsize',
+  I   => 'sbsize',
+);
+$main_format = join '', @$main_format;
+
+my @fields = qw(size start fsize type frag cpg);
+my $format = "I I I C C S";
+my $magic = 0x82564557;
+my $nb_primary = 8;
+my $offset = 0x40;
+
+sub read($$) {
+    my ($hd, $sector) = @_;
+    my $tmp;
+
+    local *F; partition_table_raw::openit($hd, *F) or die "failed to open device";
+    c::lseek_sector(fileno(F), $sector, $offset) or die "reading of partition in sector $sector failed";
+
+    sysread F, $tmp, psizeof($main_format) or die "error while reading partition table in sector $sector";
+    my %info; @info{@$main_fields} = unpack $main_format, $tmp;
+
+    my @pt = map {
+	sysread F, $tmp, psizeof($format) or die "error while reading partition table in sector $sector";
+	my %h; @h{@fields} = unpack $format, $tmp;
+	$h{type} = $typeToDos{$h{type}} || $h{type};
+	\%h;
+    } (1..$nb_primary);
+
+    #- check magic number
+    $info{magic}  == $magic or die "bad magic number";
+    $info{magic2} == $magic or die "bad magic number";
+
+    [ @pt ], \%info;
+}
+
+# write the partition table (and extended ones)
+# for each entry, it uses fields: start, size, type, active
+sub write($$$;$) {
+    my ($hd, $sector, $pt, $info) = @_;
+
+    print "Her\n";
+    local *F; partition_table_raw::openit($hd, *F, 2) or die "error opening device $hd->{device} for writing";
+    c::lseek_sector(fileno(F), $sector, $offset) or return 0;
+
+    $info->{npartitions} = $nb_primary; #- is it ok?
+
+    syswrite F, pack($main_format, @$info{@$main_fields}), psizeof($main_format) or return 0;
+
+    @$pt == $nb_primary or die "partition table does not have $nb_primary entries";
+    foreach (@$pt) {
+	local $_->{type} = $typeFromDos{$_->{type}} || $_->{type};
+	syswrite F, pack($format, @$_{@fields}), psizeof($format) or return 0;
+    }
+    1;
+}
+
+sub info {
+    my ($hd) = @_;
+    my $dtype_scsi  = 4; #- taken from fdisk, removed unused one,
+    my $dtype_ST506 = 6; #- see fdisk for more
+
+    {
+      magic => $magic,
+      magic2 => $magic,
+      dtype => $hd->{device} =~ /^sd/ ? $dtype_scsi : $dtype_ST506,
+      secsize => $common::SECTORSIZE,
+      ncylinders => $hd->{geom}{cylinders},
+      secpercyl => partition_table::cylinder_size($hd),
+      secprtunit => $hd->{geom}{totalsectors},
+      rpm => 3600,
+      interleave => 1,
+      trackskew => 0,
+      cylskew => 0,
+      headswitch => 0,
+      trkseek => 0,
+      bbsize => 8192, #- size of boot area, with label
+      sbsize => 8192, #- max size of fs superblock
+    };
+}
+
+sub clear_raw {
+    my ($hd) = @_;
+    { raw => [ ({}) x $nb_primary ], info => info($hd) };
+}
+
+1;