diff options
Diffstat (limited to 'perl-install/install_interactive.pm')
| -rw-r--r-- | perl-install/install_interactive.pm | 297 |
1 files changed, 0 insertions, 297 deletions
diff --git a/perl-install/install_interactive.pm b/perl-install/install_interactive.pm deleted file mode 100644 index 186397e37..000000000 --- a/perl-install/install_interactive.pm +++ /dev/null @@ -1,297 +0,0 @@ -package install_interactive; # $Id$ - -use diagnostics; -use strict; - -use common; -use partition_table qw(:types); -use partition_table::raw; -use detect_devices; -use install_steps; -use install_any; -use devices; -use fsedit; -use log; -use fs; - - -sub tellAboutProprietaryModules { - my ($o) = @_; - my @l = grep { $_ } map { $_->{driver} =~ /^Bad:(.*)/ && $1 } detect_devices::probeall(); - $o->ask_warn('', formatAlaTeX( -N("Some hardware on your computer needs ``proprietary'' drivers to work. -You can find some information about them at: %s", join(", ", @l)))) if @l; -} - -#- unit of $mb is mega bytes, min and max are in sectors, this -#- function is used to convert back to sectors count the size of -#- a partition ($mb) given from the interface (on Resize or Create). -#- modified to take into account a true bounding with min and max. -sub from_Mb { - my ($mb, $min, $max) = @_; - $mb <= $min >> 11 and return $min; - $mb >= $max >> 11 and return $max; - $mb * 2048; -} - -sub partition_with_diskdrake { - my ($o, $all_hds, $nowizard) = @_; - my $ok; - - do { - $ok = 1; - my $do_force_reload = sub { - $o->{all_hds} = fsedit::empty_all_hds(); - install_any::getHds($o, $o); - $all_hds = $o->{all_hds}; - $o->{all_hds}; - }; - require diskdrake::interactive; - { - local $::expert = $::expert; - diskdrake::interactive::main($o, $all_hds, $nowizard, $do_force_reload, $o->interactive_help_sub_display_id('partition_with_diskdrake')); - } - if (delete $o->{wizard}) { - partitionWizard($o, 'nodiskdrake') or redo; - return 1; - } - my @fstab = fsedit::get_all_fstab($all_hds); - - unless (fsedit::get_root_(\@fstab)) { - $ok = 0; - $o->ask_okcancel('', N("You must have a root partition. -For this, create a partition (or click on an existing one). -Then choose action ``Mount point'' and set it to `/'"), 1) or return; - } - if (!any { isSwap($_) } @fstab) { - $ok &&= $o->ask_okcancel('', N("You don't have a swap partition.\n\nContinue anyway?")); - } - if (arch() =~ /ia64/ && !fsedit::has_mntpoint("/boot/efi", $all_hds)) { - $o->ask_warn('', N("You must have a FAT partition mounted in /boot/efi")); - $ok = ''; - } - } until $ok; - 1; -} - -sub partitionWizardSolutions { - my ($o, $all_hds) = @_; - my $hds = $all_hds->{hds}; - my $fstab = [ fsedit::get_all_fstab($all_hds) ]; - my @wizlog; - my (%solutions); - - my $min_linux = 400 << 11; - my $max_linux = 2000 << 11; - my $min_swap = 50 << 11; - my $max_swap = 300 << 11; - my $min_freewin = 100 << 11; - - # each solution is a [ score, text, function ], where the function retunrs true if succeeded - - my @hds_rw = grep { !$_->{readonly} } @$hds; - my @hds_can_add = grep { $_->can_raw_add } @hds_rw; - if (fsedit::free_space(@hds_can_add) > $min_linux) { - $solutions{free_space} = [ 20, N("Use free space"), sub { fsedit::auto_allocate($all_hds); 1 } ] - } else { - push @wizlog, N("Not enough free space to allocate new partitions") . ": " . - (@hds_can_add ? - fsedit::free_space(@hds_can_add) . " < $min_linux" : - "no harddrive on which partitions can be added"); - } - - if (my @truefs = grep { isTrueLocalFS($_) } @$fstab) { - #- value twice the ext2 partitions - $solutions{existing_part} = [ 6 + @truefs + @$fstab, N("Use existing partitions"), sub { $o->ask_mntpoint_s($fstab) } ] - } else { - push @wizlog, N("There is no existing partition to use"); - } - - my @fats = grep { isFat($_) } @$fstab; - fs::df($_) foreach @fats; - if (my @ok_forloopback = sort { $b->{free} <=> $a->{free} } grep { $_->{free} > $min_linux + $min_swap + $min_freewin } @fats) { - $solutions{loopback} = - [ -10 - @fats, N("Use the Windows partition for loopback"), - sub { - my ($s_root, $s_swap); - my $part = $o->ask_from_listf('', N("Which partition do you want to use for Linux4Win?"), \&partition_table::description, \@ok_forloopback) or return; - $max_swap = $min_swap + 1 if $part->{free} - $max_swap < $min_linux; - $o->ask_from('', N("Choose the sizes"), [ - { label => N("Root partition size in MB: "), val => \$s_root, min => $min_linux >> 11, max => min($part->{free} - $max_swap, $max_linux) >> 11, type => 'range' }, - { label => N("Swap partition size in MB: "), val => \$s_swap, min => $min_swap >> 11, max => $max_swap >> 11, type => 'range' }, - ]) or return; - push @{$part->{loopback}}, - { type =>0x483, loopback_file => '/lnx4win/linuxsys.img', mntpoint => '/', size => $s_root << 11, loopback_device => $part, notFormatted => 1 }, - { type => 0x82, loopback_file => '/lnx4win/swapfile', mntpoint => 'swap', size => $s_swap << 11, loopback_device => $part, notFormatted => 1 }; - fsedit::recompute_loopbacks($all_hds); - 1; - } ]; - } else { - push @wizlog, N("There is no FAT partition to use as loopback (or not enough space left)") . - (@fats ? "\nFAT partitions:" . join('', map { "\n $_->{device} $_->{free} (" . ($min_linux + $min_swap + $min_freewin) . ")" } @fats) : ''); - } - - - if (my @ok_for_resize_fat = grep { isFat_or_NTFS($_) && !fsedit::part2hd($_, $all_hds)->{readonly} } @$fstab) { - $solutions{resize_fat} = - [ 6 - @ok_for_resize_fat, N("Use the free space on the Windows partition"), - sub { - my $part = $o->ask_from_listf_raw({ messages => N("Which partition do you want to resize?"), - interactive_help_id => 'resizeFATChoose', - }, \&partition_table::description, \@ok_for_resize_fat) or return; - my $hd = fsedit::part2hd($part, $all_hds); - my $resize_fat = eval { - my $pkg = isFat($part) ? do { - require resize_fat::main; - 'resize_fat::main'; - } : do { - require diskdrake::resize_ntfs; - 'diskdrake::resize_ntfs'; - }; - $pkg->new($part->{device}, devices::make($part->{device})); - }; - $@ and die N("The FAT resizer is unable to handle your partition, -the following error occured: %s", formatError($@)); - my $min_win = do { - my $_w = $o->wait_message(N("Resizing"), N("Computing the size of the Windows partition")); - $resize_fat->min_size; - }; - #- make sure that even after normalizing the size to cylinder boundaries, the minimun will be saved, - #- this save at least a cylinder (less than 8Mb). - $min_win += partition_table::raw::cylinder_size($hd); - - $part->{size} > $min_linux + $min_swap + $min_freewin + $min_win or die N("Your Windows partition is too fragmented. Please reboot your computer under Windows, run the ``defrag'' utility, then restart the Mandrakelinux installation."); - $o->ask_okcancel('', formatAlaTeX(N("WARNING! - -DrakX will now resize your Windows partition. Be careful: this -operation is dangerous. If you have not already done so, you -first need to exit the installation, run \"chkdsk c:\" from a -Command Prompt under Windows (beware, running graphical program -\"scandisk\" is not enough, be sure to use \"chkdsk\" in a -Command Prompt!), optionally run defrag, then restart the -installation. You should also backup your data. -When sure, press Ok."))) or return; - - my $mb_size = $part->{size} >> 11; - $o->ask_from('', N("Which size do you want to keep for Windows on"), [ - { label => N("partition %s", partition_table::description($part)), val => \$mb_size, min => $min_win >> 11, max => ($part->{size} - $min_linux - $min_swap) >> 11, type => 'range' }, - ]) or return; - - my $oldsize = $part->{size}; - $part->{size} = from_Mb($mb_size, $min_win, $part->{size}); - - $hd->adjustEnd($part); - - eval { - my $_w = $o->wait_message(N("Resizing"), N("Resizing Windows partition")); - $resize_fat->resize($part->{size}); - }; - if (my $err = $@) { - $part->{size} = $oldsize; - die N("FAT resizing failed: %s", formatError($err)); - } - - $o->ask_warn('', N("To ensure data integrity after resizing the partition(s), -filesystem checks will be run on your next boot into Windows(TM)")) if !isFat($part); - - $part->{isFormatted} = 1; - partition_table::will_tell_kernel($hd, resize => $part); #- down-sizing, write_partitions is not needed - partition_table::adjust_local_extended($hd, $part); - partition_table::adjust_main_extended($hd); - - fsedit::auto_allocate($all_hds); - 1; - } ]; - } else { - push @wizlog, N("There is no FAT partition to resize (or not enough space left)"); - } - - if (@$fstab && @hds_rw) { - $solutions{wipe_drive} = - [ 10, fsedit::is_one_big_fat_or_NT($hds) ? N("Remove Windows(TM)") : N("Erase entire disk"), - sub { - my $hd = $o->ask_from_listf_raw({ messages => N("You have more than one hard drive, which one do you install linux on?"), - interactive_help_id => 'takeOverHdChoose', - }, - \&partition_table::description, \@hds_rw) or return; - $o->ask_okcancel_({ messages => N("ALL existing partitions and their data will be lost on drive %s", partition_table::description($hd)), - interactive_help_id => 'takeOverHdConfirm' }) or return; - partition_table::raw::zero_MBR($hd); - fsedit::auto_allocate($all_hds); - 1; - } ]; - } - - if (@hds_rw) { - $solutions{diskdrake} = [ 0, N("Custom disk partitioning"), sub { partition_with_diskdrake($o, $all_hds, 'nowizard') } ]; - } - - $solutions{fdisk} = - [ -10, N("Use fdisk"), sub { - $o->enter_console; - foreach (@$hds) { - print "\n" x 10, N("You can now partition %s. -When you are done, don't forget to save using `w'", partition_table::description($_)); - print "\n\n"; - my $pid = 0; - if (arch() =~ /ppc/) { - $pid = fork() or exec "pdisk", devices::make($_->{device}); - } else { - $pid = fork() or exec "fdisk", devices::make($_->{device}); - } - waitpid($pid, 0); - } - $o->leave_console; - 0; - } ] if $o->{partitioning}{fdisk}; - - log::l("partitioning wizard log:\n", (map { ">>wizlog>>$_\n" } @wizlog)); - %solutions; -} - -sub partitionWizard { - my ($o, $b_nodiskdrake) = @_; - - my %solutions = partitionWizardSolutions($o, $o->{all_hds}); - - delete $solutions{diskdrake} if $b_nodiskdrake; - - my @solutions = sort { $b->[0] <=> $a->[0] } values %solutions; - - my $level = $::expert ? -9999 : 0; - my @sol = grep { $_->[0] >= $level } @solutions; - - log::l('' . "solutions found: " . join('', map { $_->[1] } @sol) . - " (all solutions found: " . join('', map { $_->[1] } @solutions) . ")"); - - @solutions = @sol if @sol > 1; - log::l("solutions: ", int @solutions); - @solutions or $o->ask_warn('', N("I can't find any room for installing")), die 'already displayed'; - - log::l('HERE: ', join(',', map { $_->[1] } @solutions)); - my $sol; - $o->ask_from_({ messages => N("The DrakX Partitioning wizard found the following solutions:"), - interactive_help_id => 'doPartitionDisks', - }, - [ { val => \$sol, list => \@solutions, format => sub { $_[0][1] }, type => 'list' } ]); - log::l("partitionWizard calling solution $sol->[1]"); - my $ok = eval { $sol->[2]->() }; - $@ and $o->ask_warn('', N("Partitioning failed: %s", formatError($@))); - $ok or goto &partitionWizard; - 1; -} - -sub upNetwork { - my ($o, $b_pppAvoided) = @_; - my $_w = $o->wait_message('', N("Bringing up the network")); - install_steps::upNetwork($o, $b_pppAvoided); -} -sub downNetwork { - my ($o, $b_pppOnly) = @_; - my $_w = $o->wait_message('', N("Bringing down the network")); - install_steps::downNetwork($o, $b_pppOnly); -} - - - -1; |