diff options
Diffstat (limited to 'perl-install/install/help')
72 files changed, 293 insertions, 293 deletions
diff --git a/perl-install/install/help/help.pm b/perl-install/install/help/help.pm index a60aec02f..2182bf63d 100644 --- a/perl-install/install/help/help.pm +++ b/perl-install/install/help/help.pm @@ -67,10 +67,10 @@ Each partition is listed as follows: \"Name\", \"Capacity\". \"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\", \"partition number\" (for example, \"hda1\"). -\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and +\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and \"sd\" if it is a SCSI hard disk drive. -\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE +\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE hard disk drives: * \"a\" means \"master hard disk drive on the primary IDE controller\"; @@ -536,10 +536,10 @@ Each partition is listed as follows: \"Linux name\", \"Windows name\" \"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\", \"partition number\" (for example, \"hda1\"). -\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and +\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and \"sd\" if it is a SCSI hard disk drive. -\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE +\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE hard disk drives: * \"a\" means \"master hard disk drive on the primary IDE controller\"; diff --git a/perl-install/install/help/po/DrakX-help.pot b/perl-install/install/help/po/DrakX-help.pot index 81f958daa..a6ed2b546 100644 --- a/perl-install/install/help/po/DrakX-help.pot +++ b/perl-install/install/help/po/DrakX-help.pot @@ -97,10 +97,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -731,10 +731,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/af.po b/perl-install/install/help/po/af.po index 2daeb34ab..b497979c8 100644 --- a/perl-install/install/help/po/af.po +++ b/perl-install/install/help/po/af.po @@ -152,10 +152,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1190,10 +1190,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/am.po b/perl-install/install/help/po/am.po index 2f4109a61..337ee9d3c 100644 --- a/perl-install/install/help/po/am.po +++ b/perl-install/install/help/po/am.po @@ -95,10 +95,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -727,10 +727,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ar.po b/perl-install/install/help/po/ar.po index a5275911a..53dd78910 100644 --- a/perl-install/install/help/po/ar.po +++ b/perl-install/install/help/po/ar.po @@ -144,10 +144,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1215,10 +1215,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/az.po b/perl-install/install/help/po/az.po index 06e5f3ba0..68e7a1c61 100644 --- a/perl-install/install/help/po/az.po +++ b/perl-install/install/help/po/az.po @@ -153,10 +153,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1260,10 +1260,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/be.po b/perl-install/install/help/po/be.po index 8e8e18c45..bb0cdb594 100644 --- a/perl-install/install/help/po/be.po +++ b/perl-install/install/help/po/be.po @@ -95,10 +95,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -727,10 +727,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/bg.po b/perl-install/install/help/po/bg.po index d503d120c..7dbff4499 100644 --- a/perl-install/install/help/po/bg.po +++ b/perl-install/install/help/po/bg.po @@ -150,10 +150,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1131,10 +1131,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/bn.po b/perl-install/install/help/po/bn.po index 4f4a57921..0322733c7 100644 --- a/perl-install/install/help/po/bn.po +++ b/perl-install/install/help/po/bn.po @@ -148,10 +148,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1037,10 +1037,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/br.po b/perl-install/install/help/po/br.po index bb90f6ca5..489c655df 100644 --- a/perl-install/install/help/po/br.po +++ b/perl-install/install/help/po/br.po @@ -97,10 +97,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -737,10 +737,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/bs.po b/perl-install/install/help/po/bs.po index 0ed9bd845..20f6339fd 100644 --- a/perl-install/install/help/po/bs.po +++ b/perl-install/install/help/po/bs.po @@ -151,10 +151,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1239,10 +1239,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ca.po b/perl-install/install/help/po/ca.po index e9b1cb8f8..a2e3d12fd 100644 --- a/perl-install/install/help/po/ca.po +++ b/perl-install/install/help/po/ca.po @@ -158,10 +158,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1260,10 +1260,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/cs.po b/perl-install/install/help/po/cs.po index 201707577..a7070ca8b 100644 --- a/perl-install/install/help/po/cs.po +++ b/perl-install/install/help/po/cs.po @@ -142,10 +142,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1231,10 +1231,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/cy.po b/perl-install/install/help/po/cy.po index 06e8f7f1e..3c5296b15 100644 --- a/perl-install/install/help/po/cy.po +++ b/perl-install/install/help/po/cy.po @@ -148,10 +148,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1188,10 +1188,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/da.po b/perl-install/install/help/po/da.po index 656b3cd21..865e30874 100644 --- a/perl-install/install/help/po/da.po +++ b/perl-install/install/help/po/da.po @@ -145,10 +145,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1214,10 +1214,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/de.po b/perl-install/install/help/po/de.po index 99f809a5d..28388283e 100644 --- a/perl-install/install/help/po/de.po +++ b/perl-install/install/help/po/de.po @@ -153,10 +153,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1276,10 +1276,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/el.po b/perl-install/install/help/po/el.po index c8bdd993d..d3f6566d5 100644 --- a/perl-install/install/help/po/el.po +++ b/perl-install/install/help/po/el.po @@ -140,10 +140,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1200,10 +1200,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/eo.po b/perl-install/install/help/po/eo.po index 6a929c56a..5e1e4e5b8 100644 --- a/perl-install/install/help/po/eo.po +++ b/perl-install/install/help/po/eo.po @@ -148,10 +148,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1263,10 +1263,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/es.po b/perl-install/install/help/po/es.po index f2b8a92a0..4bf27acee 100644 --- a/perl-install/install/help/po/es.po +++ b/perl-install/install/help/po/es.po @@ -153,10 +153,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1290,10 +1290,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/et.po b/perl-install/install/help/po/et.po index 979459604..bbf9e3cac 100644 --- a/perl-install/install/help/po/et.po +++ b/perl-install/install/help/po/et.po @@ -143,10 +143,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1243,10 +1243,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/eu.po b/perl-install/install/help/po/eu.po index ea34a69b4..0b1dc798b 100644 --- a/perl-install/install/help/po/eu.po +++ b/perl-install/install/help/po/eu.po @@ -146,10 +146,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1266,10 +1266,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/fa.po b/perl-install/install/help/po/fa.po index a1825092e..0ca028505 100644 --- a/perl-install/install/help/po/fa.po +++ b/perl-install/install/help/po/fa.po @@ -145,10 +145,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1226,10 +1226,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/fi.po b/perl-install/install/help/po/fi.po index 5ad859ce0..0cbd4f197 100644 --- a/perl-install/install/help/po/fi.po +++ b/perl-install/install/help/po/fi.po @@ -143,10 +143,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1219,10 +1219,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/fr.po b/perl-install/install/help/po/fr.po index ab9c8046e..5eb50848f 100644 --- a/perl-install/install/help/po/fr.po +++ b/perl-install/install/help/po/fr.po @@ -208,10 +208,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1323,10 +1323,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/fur.po b/perl-install/install/help/po/fur.po index 1ac5a3d6c..f199dceec 100644 --- a/perl-install/install/help/po/fur.po +++ b/perl-install/install/help/po/fur.po @@ -97,10 +97,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -729,10 +729,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ga.po b/perl-install/install/help/po/ga.po index cf6fa9d88..75d769a72 100644 --- a/perl-install/install/help/po/ga.po +++ b/perl-install/install/help/po/ga.po @@ -94,10 +94,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -726,10 +726,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/gl.po b/perl-install/install/help/po/gl.po index 5e39caf0f..1dd690d63 100644 --- a/perl-install/install/help/po/gl.po +++ b/perl-install/install/help/po/gl.po @@ -140,10 +140,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1230,10 +1230,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/he.po b/perl-install/install/help/po/he.po index d8090b97b..7b492c2a4 100644 --- a/perl-install/install/help/po/he.po +++ b/perl-install/install/help/po/he.po @@ -146,10 +146,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1212,10 +1212,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/hi.po b/perl-install/install/help/po/hi.po index 064469ef9..7f68c3f4a 100644 --- a/perl-install/install/help/po/hi.po +++ b/perl-install/install/help/po/hi.po @@ -145,10 +145,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1015,10 +1015,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/hr.po b/perl-install/install/help/po/hr.po index 0455c242f..206b62942 100644 --- a/perl-install/install/help/po/hr.po +++ b/perl-install/install/help/po/hr.po @@ -136,10 +136,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1190,10 +1190,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/hu.po b/perl-install/install/help/po/hu.po index b12826d15..76c5c5721 100644 --- a/perl-install/install/help/po/hu.po +++ b/perl-install/install/help/po/hu.po @@ -144,10 +144,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1246,10 +1246,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/id.po b/perl-install/install/help/po/id.po index d32206e6d..9ce92e824 100644 --- a/perl-install/install/help/po/id.po +++ b/perl-install/install/help/po/id.po @@ -153,10 +153,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1282,10 +1282,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/is.po b/perl-install/install/help/po/is.po index b6a06c2b6..210b0f517 100644 --- a/perl-install/install/help/po/is.po +++ b/perl-install/install/help/po/is.po @@ -147,10 +147,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1227,10 +1227,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/it.po b/perl-install/install/help/po/it.po index 224d80632..790bbce75 100644 --- a/perl-install/install/help/po/it.po +++ b/perl-install/install/help/po/it.po @@ -149,10 +149,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1307,10 +1307,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ja.po b/perl-install/install/help/po/ja.po index 64836aea3..15656ed6a 100644 --- a/perl-install/install/help/po/ja.po +++ b/perl-install/install/help/po/ja.po @@ -136,10 +136,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1176,10 +1176,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ko.po b/perl-install/install/help/po/ko.po index 1a89f07a8..5c50d5892 100644 --- a/perl-install/install/help/po/ko.po +++ b/perl-install/install/help/po/ko.po @@ -102,10 +102,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1021,10 +1021,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ky.po b/perl-install/install/help/po/ky.po index d5b61ccf6..a7a555631 100644 --- a/perl-install/install/help/po/ky.po +++ b/perl-install/install/help/po/ky.po @@ -141,10 +141,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1148,10 +1148,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/lt.po b/perl-install/install/help/po/lt.po index c2be6bb72..434c94cca 100644 --- a/perl-install/install/help/po/lt.po +++ b/perl-install/install/help/po/lt.po @@ -96,10 +96,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -942,10 +942,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ltg.po b/perl-install/install/help/po/ltg.po index 81512fceb..cf57d4bd6 100644 --- a/perl-install/install/help/po/ltg.po +++ b/perl-install/install/help/po/ltg.po @@ -101,10 +101,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -942,10 +942,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/lv.po b/perl-install/install/help/po/lv.po index 111af33d9..fed5ce4ef 100644 --- a/perl-install/install/help/po/lv.po +++ b/perl-install/install/help/po/lv.po @@ -103,10 +103,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -941,10 +941,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/mk.po b/perl-install/install/help/po/mk.po index ee58e5f1e..2acdde2d9 100644 --- a/perl-install/install/help/po/mk.po +++ b/perl-install/install/help/po/mk.po @@ -151,10 +151,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1291,10 +1291,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/mn.po b/perl-install/install/help/po/mn.po index bb6a1c0a9..4fcbd4227 100644 --- a/perl-install/install/help/po/mn.po +++ b/perl-install/install/help/po/mn.po @@ -99,10 +99,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -772,10 +772,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ms.po b/perl-install/install/help/po/ms.po index d55a1c374..17b9ed9e2 100644 --- a/perl-install/install/help/po/ms.po +++ b/perl-install/install/help/po/ms.po @@ -99,10 +99,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -794,10 +794,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/mt.po b/perl-install/install/help/po/mt.po index b62e189a8..42e7067d1 100644 --- a/perl-install/install/help/po/mt.po +++ b/perl-install/install/help/po/mt.po @@ -136,10 +136,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1208,10 +1208,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/nb.po b/perl-install/install/help/po/nb.po index 7fe2b9dc9..8d8dd6ccd 100644 --- a/perl-install/install/help/po/nb.po +++ b/perl-install/install/help/po/nb.po @@ -159,10 +159,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1293,10 +1293,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/nl.po b/perl-install/install/help/po/nl.po index 8d2ba4a3c..e8e2bd403 100644 --- a/perl-install/install/help/po/nl.po +++ b/perl-install/install/help/po/nl.po @@ -149,10 +149,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1276,10 +1276,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/nn.po b/perl-install/install/help/po/nn.po index 6642318e0..8b7b7c81f 100644 --- a/perl-install/install/help/po/nn.po +++ b/perl-install/install/help/po/nn.po @@ -153,10 +153,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1207,10 +1207,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/pa_IN.po b/perl-install/install/help/po/pa_IN.po index 198badb64..5036fb640 100644 --- a/perl-install/install/help/po/pa_IN.po +++ b/perl-install/install/help/po/pa_IN.po @@ -103,10 +103,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -760,10 +760,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/pl.po b/perl-install/install/help/po/pl.po index d118f0eb4..000c6ebc4 100644 --- a/perl-install/install/help/po/pl.po +++ b/perl-install/install/help/po/pl.po @@ -149,10 +149,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1251,10 +1251,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/pt.po b/perl-install/install/help/po/pt.po index db198a229..267f62ee1 100644 --- a/perl-install/install/help/po/pt.po +++ b/perl-install/install/help/po/pt.po @@ -152,10 +152,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1238,10 +1238,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/pt_BR.po b/perl-install/install/help/po/pt_BR.po index 63f6f364c..92861c236 100644 --- a/perl-install/install/help/po/pt_BR.po +++ b/perl-install/install/help/po/pt_BR.po @@ -160,10 +160,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1282,10 +1282,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ro.po b/perl-install/install/help/po/ro.po index 0a6b5c99f..9a48dc4dd 100644 --- a/perl-install/install/help/po/ro.po +++ b/perl-install/install/help/po/ro.po @@ -101,10 +101,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -733,10 +733,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ru.po b/perl-install/install/help/po/ru.po index 67aba145b..770e3faaa 100644 --- a/perl-install/install/help/po/ru.po +++ b/perl-install/install/help/po/ru.po @@ -143,10 +143,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -174,7 +174,7 @@ msgstr "" "\"Название\" разделяется на: \"тип жесткого диска\", \"номер жесткого\n" "диска\", \"номер раздела\" (например, \"hda1\").\n" "\n" -"\"Hard drive type\" это \"hd\", если ваш жесткий диск IDE и \"sd\", если он\n" +"\"Hard disk drive type\" это \"hd\", если ваш жесткий диск IDE и \"sd\", если он\n" "SCSI.\n" "\n" "\"Номер жесткого диска\" всегда является буквой после \"hd\" или \"sd\".\n" @@ -1240,10 +1240,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/sc.po b/perl-install/install/help/po/sc.po index 9be661ec6..24059e258 100644 --- a/perl-install/install/help/po/sc.po +++ b/perl-install/install/help/po/sc.po @@ -97,10 +97,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -729,10 +729,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/sk.po b/perl-install/install/help/po/sk.po index 0144c4318..177fcc2dd 100644 --- a/perl-install/install/help/po/sk.po +++ b/perl-install/install/help/po/sk.po @@ -143,10 +143,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1273,10 +1273,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/sl.po b/perl-install/install/help/po/sl.po index e25ba3aae..c5090e97e 100644 --- a/perl-install/install/help/po/sl.po +++ b/perl-install/install/help/po/sl.po @@ -150,10 +150,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1224,10 +1224,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/sq.po b/perl-install/install/help/po/sq.po index 51772db19..92a0455b1 100644 --- a/perl-install/install/help/po/sq.po +++ b/perl-install/install/help/po/sq.po @@ -145,10 +145,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1242,10 +1242,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/sr.po b/perl-install/install/help/po/sr.po index daa320f62..c0a8a192e 100644 --- a/perl-install/install/help/po/sr.po +++ b/perl-install/install/help/po/sr.po @@ -149,10 +149,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1279,10 +1279,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/sr@Latn.po b/perl-install/install/help/po/sr@Latn.po index 94bf1c5b7..147fa9245 100644 --- a/perl-install/install/help/po/sr@Latn.po +++ b/perl-install/install/help/po/sr@Latn.po @@ -151,10 +151,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1284,10 +1284,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/sv.po b/perl-install/install/help/po/sv.po index 328440b41..b69e3ea27 100644 --- a/perl-install/install/help/po/sv.po +++ b/perl-install/install/help/po/sv.po @@ -148,10 +148,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1235,10 +1235,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/ta.po b/perl-install/install/help/po/ta.po index 609b696ad..60f031e31 100644 --- a/perl-install/install/help/po/ta.po +++ b/perl-install/install/help/po/ta.po @@ -133,10 +133,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -164,10 +164,10 @@ msgstr "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1067,10 +1067,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1098,10 +1098,10 @@ msgstr "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/tg.po b/perl-install/install/help/po/tg.po index d0a283436..415cba967 100644 --- a/perl-install/install/help/po/tg.po +++ b/perl-install/install/help/po/tg.po @@ -156,10 +156,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1295,10 +1295,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/th.po b/perl-install/install/help/po/th.po index 4d546b0ff..e2f4a4384 100644 --- a/perl-install/install/help/po/th.po +++ b/perl-install/install/help/po/th.po @@ -97,10 +97,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -729,10 +729,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/tl.po b/perl-install/install/help/po/tl.po index c1602ea14..b17744a07 100644 --- a/perl-install/install/help/po/tl.po +++ b/perl-install/install/help/po/tl.po @@ -154,10 +154,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1313,10 +1313,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/tr.po b/perl-install/install/help/po/tr.po index ebf9a6772..90138caff 100644 --- a/perl-install/install/help/po/tr.po +++ b/perl-install/install/help/po/tr.po @@ -143,10 +143,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1168,10 +1168,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/uk.po b/perl-install/install/help/po/uk.po index 08ff66fcb..042c2ace7 100644 --- a/perl-install/install/help/po/uk.po +++ b/perl-install/install/help/po/uk.po @@ -146,10 +146,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1236,10 +1236,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/uz.po b/perl-install/install/help/po/uz.po index 03ff0d14e..c15043d7b 100644 --- a/perl-install/install/help/po/uz.po +++ b/perl-install/install/help/po/uz.po @@ -101,10 +101,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -749,10 +749,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/uz@cyrillic.po b/perl-install/install/help/po/uz@cyrillic.po index 38a7af057..17ca71694 100644 --- a/perl-install/install/help/po/uz@cyrillic.po +++ b/perl-install/install/help/po/uz@cyrillic.po @@ -101,10 +101,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -748,10 +748,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/vi.po b/perl-install/install/help/po/vi.po index bc530d27b..17ca0f116 100644 --- a/perl-install/install/help/po/vi.po +++ b/perl-install/install/help/po/vi.po @@ -134,10 +134,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1196,10 +1196,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/wa.po b/perl-install/install/help/po/wa.po index abc7c5aa4..338c84c25 100644 --- a/perl-install/install/help/po/wa.po +++ b/perl-install/install/help/po/wa.po @@ -146,10 +146,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1267,10 +1267,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/zh_CN.po b/perl-install/install/help/po/zh_CN.po index 14cdc89d6..a98830d47 100644 --- a/perl-install/install/help/po/zh_CN.po +++ b/perl-install/install/help/po/zh_CN.po @@ -129,10 +129,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1136,10 +1136,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" diff --git a/perl-install/install/help/po/zh_TW.po b/perl-install/install/help/po/zh_TW.po index 16c1b495b..8f3015920 100644 --- a/perl-install/install/help/po/zh_TW.po +++ b/perl-install/install/help/po/zh_TW.po @@ -142,10 +142,10 @@ msgid "" "\"Name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard disk drive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" @@ -1045,10 +1045,10 @@ msgid "" "\"Linux name\" is structured: \"hard disk drive type\", \"hard disk drive number\",\n" "\"partition number\" (for example, \"hda1\").\n" "\n" -"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" +"\"Hard disk drive type\" is \"hd\" if your hard dive is an IDE hard disk drive and\n" "\"sd\" if it is a SCSI hard disk drive.\n" "\n" -"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" +"\"Hard disk drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n" "hard disk drives:\n" "\n" " * \"a\" means \"master hard disk drive on the primary IDE controller\";\n" |