diff options
Diffstat (limited to 'perl-install/help.pm')
| -rw-r--r-- | perl-install/help.pm | 999 |
1 files changed, 490 insertions, 509 deletions
diff --git a/perl-install/help.pm b/perl-install/help.pm index bb3e94eb3..1f12244b4 100644 --- a/perl-install/help.pm +++ b/perl-install/help.pm @@ -5,56 +5,51 @@ use common; # from the manuals !!! # Write a mail to <documentation@mandrakesoft.com> if # you want it changed. - -our %steps = ( - -acceptLicense => -N_("Before continuing, you should carefully read the terms of the license. It +sub acceptLicense { + N("Before continuing, you should carefully read the terms of the license. It covers the entire Mandrake Linux distribution. If you do agree with all the -terms in it, check the \"Accept\" box. If not, simply turn off your -computer."), - -addUser => -N_("GNU/Linux is a multi-user system, meaning each user can have their own +terms in it, check the \"%s\" box. If not, simply turn off your computer.", N("Accept")); +} +sub addUser { + N("GNU/Linux is a multi-user system, meaning each user may have their own preferences, their own files and so on. You can read the ``Starter Guide'' -to learn more about multi-user systems. But unlike \"root\", which is the +to learn more about multi-user systems. But unlike \"root\", who is the system administrator, the users you add at this point will not be authorized to change anything except their own files and their own -configuration, protecting the system from unintentional or malicious -changes that impact the system as a whole. You will have to create at least -one regular user for yourself -- this is the account which you should use -for routine, day-to-day use. Although it is very easy to log in as \"root\" -to do anything and everything, it may also be very dangerous! A mistake -could mean that your system would not work any more. If you make a serious -mistake as a regular user, the worst that will happen is that you will lose -some information, but not affect the entire system. +configurations, protecting the system from unintentional or malicious +changes that impact on the system as a whole. You will have to create at +least one regular user for yourself -- this is the account which you should +use for routine, day-to-day use. Although it is very easy to log in as +\"root\" to do anything and everything, it may also be very dangerous! A +very simple mistake could mean that your system will not work any more. If +you make a serious mistake as a regular user, the worst that will happen is +that you will lose some information, but not affect the entire system. The first field asks you for a real name. Of course, this is not mandatory -- you can actually enter whatever you like. DrakX will use the first word -you typed in and copy it to the \"User name\" field, which is the name this -user will enter to log onto the system. If you like, you may override the -default and change the username. The next step is to enter a password. From -a security point of view, a non-privileged (regular) user password is not -as crucial as the \"root\" password, but that is no reason to neglect it by -making it blank or too simple: after all, your files could be the ones at -risk. - -Once you click on \"Accept user\", you can add other users. Add a user for -each one of your friends: your father or your sister, for example. Click -\"Next ->\" when you have finished adding users. - -Clicking the \"Advanced\" button allows you to change the default \"shell\" -for that user (bash by default). - -When you are finished adding all users, you will be asked to choose a user +you typed in this field and copy it to the \"%s\" field, which is the name +this user will enter to log onto the system. If you like, you may override +the default and change the username. The next step is to enter a password. +From a security point of view, a non-privileged (regular) user password is +not as crucial as the \"root\" password, but that is no reason to neglect +it by making it blank or too simple: after all, your files could be the +ones at risk. + +Once you click on \"%s\", you can add other users. Add a user for each one +of your friends: your father or your sister, for example. Click \"%s\" when +you have finished adding users. + +Clicking the \"%s\" button allows you to change the default \"shell\" for +that user (bash by default). + +When you have finished adding users, you will be asked to choose a user that can automatically log into the system when the computer boots up. If you are interested in that feature (and do not care much about local -security), choose the desired user and window manager, then click \"Next -->\". If you are not interested in this feature, uncheck the \"Do you want -to use this feature?\" box."), - -ask_mntpoint_s => -N_("Here are Listed the existing Linux partitions detected on your hard drive. +security), choose the desired user and window manager, then click \"%s\". +If you are not interested in this feature, uncheck the \"%s\" box.", N("User name"), N("Accept user"), N("Next ->"), N("Advanced"), N("Next ->"), N("Do you want to use this feature?")); +} +sub ask_mntpoint_s { + N("Listed here are the existing Linux partitions detected on your hard drive. You can keep the choices made by the wizard, since they are good for most common installations. If you make any changes, you must at least define a root partition (\"/\"). Do not choose too small a partition or you will not @@ -82,15 +77,15 @@ hard drives: * \"d\" means \"slave hard drive on the secondary IDE controller\". With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means -\"second lowest SCSI ID\", etc."), - -chooseCd => -N_("The Mandrake Linux installation is distributed on several CD-ROMs. DrakX +\"second lowest SCSI ID\", etc."); +} +sub chooseCd { + N("The Mandrake Linux installation is distributed on several CD-ROMs. DrakX knows if a selected package is located on another CD-ROM so it will eject -the current CD and ask you to insert the correct CD as required."), - -choosePackages => -N_("It is now time to specify which programs you wish to install on your +the current CD and ask you to insert the correct CD as required."); +} +sub choosePackages { + N("It is now time to specify which programs you wish to install on your system. There are thousands of packages available for Mandrake Linux, and to make it simpler to manage the packages have been placed into groups of similar applications. @@ -98,51 +93,49 @@ similar applications. Packages are sorted into groups corresponding to a particular use of your machine. Mandrake Linux has four predefined installations available. You can think of these installation classes as containers for various packages. -You can mix and match applications from the various containers, so a +You can mix and match applications from the various groups, so a ``Workstation'' installation can still have applications from the -``Development'' container installed. +``Development'' group installed. - * \"Workstation\": if you plan to use your machine as a workstation, -select one or more of the applications that are in the workstation -container. + * \"%s\": if you plan to use your machine as a workstation, select one or +more of the applications that are in the workstation group. - * \"Development\": if plan on using your machine for programming, choose -the appropriate packages from the container. + * \"%s\": if plan on using your machine for programming, choose the +appropriate packages from that group. - * \"Server\": if your machine is intended to be a server, select which of -the more common services you wish to install on your machine. + * \"%s\": if your machine is intended to be a server, select which of the +more common services you wish to install on your machine. - * \"Graphical Environment\": this is where you will choose your preferred -graphical environment. At least one must be selected if you want to have a -graphical interface available. + * \"%s\": this is where you will choose your preferred graphical +environment. At least one must be selected if you want to have a graphical +interface available. Moving the mouse cursor over a group name will display a short explanatory text about that group. If you unselect all groups when performing a regular installation (as opposed to an upgrade), a dialog will pop up proposing different options for a minimal installation: - * \"With X\": install the minimum number of packages possible to have a + * \"%s\": install the minimum number of packages possible to have a working graphical desktop. - * \"With basic documentation\": installs the base system plus basic -utilities and their documentation. This installation is suitable for -setting up a server. + * \"%s\": installs the base system plus basic utilities and their +documentation. This installation is suitable for setting up a server. - * \"Truly minimal install\": will install the absolute minimum number of -packages necessary to get a working Linux system. With this installation -you will only have a command line interface. The total size of this -installation is 65 megabytes. + * \"%s\": will install the absolute minimum number of packages necessary +to get a working Linux system. With this installation you will only have a +command line interface. The total size of this installation is about 65 +megabytes. -You can check the \"Individual package selection\" box, which is useful if -you are familiar with the packages being offered or if you want to have -total control over what will be installed. +You can check the \"%s\" box, which is useful if you are familiar with the +packages being offered or if you want to have total control over what will +be installed. -If you started the installation in \"Upgrade\" mode, you can unselect all -groups to avoid installing any new package. This is useful for repairing or -updating an existing system."), - -choosePackagesTree => -N_("If you told the installer that you wanted to individually select packages, +If you started the installation in \"%s\" mode, you can unselect all groups +to avoid installing any new package. This is useful for repairing or +updating an existing system.", N("Workstation"), N("Development"), N("Server"), N("Graphical Environment"), N("With X"), N("With basic documentation"), N("Truly minimal install"), N("Individual package selection"), N("Upgrade")); +} +sub choosePackagesTree { + N("If you told the installer that you wanted to individually select packages, it will present a tree containing all packages classified by groups and subgroups. While browsing the tree, you can select entire groups, subgroups, or individual packages. @@ -156,17 +149,17 @@ you will be asked to confirm that you really want those servers to be installed. By default Mandrake Linux will automatically start any installed services at boot time. Even if they are safe and have no known issues at the time the distribution was shipped, it is entirely possible that that -security holes are discovered after this version of Mandrake Linux was +security holes were discovered after this version of Mandrake Linux was finalized. If you do not know what a particular service is supposed to do -or why it is being installed, then click \"No\". Clicking \"Yes \" will +or why it is being installed, then click \"%s\". Clicking \"%s\" will install the listed services and they will be started automatically by default during boot. !! -The \"Automatic dependencies\" option is used to disable the warning dialog -which appears whenever the installer automatically selects a package to -resolve a dependency issue. Some packages have relationships between each -other such that installation of a package requires that some other program -is already installed. The installer can determine which packages are +The \"%s\" option is used to disable the warning dialog which appears +whenever the installer automatically selects a package to resolve a +dependency issue. Some packages have relationships between each other such +that installation of a package requires that some other program is also +rerquired to be installed. The installer can determine which packages are required to satisfy a dependency to successfully complete the installation. The tiny floppy disk icon at the bottom of the list allows you to load a @@ -174,15 +167,15 @@ package list created during a previous installation. This is useful if you have a number of machines that you wish to configure identically. Clicking on this icon will ask you to insert a floppy disk previously created at the end of another installation. See the second tip of last step on how to -create such a floppy."), - -configureNetwork => -N_("You will now set up your Internet/network connection. If you wish to -connect your computer to the Internet or to a local network, click \"Next -->\". Mandrake Linux will attempt to autodetect network devices and modems. -If this detection fails, uncheck the \"Use auto detection\" box. You may -also choose not to configure the network, or to do it later, in which case -clicking the \"Cancel\" button will take you to the next step. +create such a floppy.", N("No"), N("Yes"), N("Automatic dependencies")); +} +sub configureNetwork { + N("You will now set up your Internet/network connection. If you wish to +connect your computer to the Internet or to a local network, click \"%s\". +Mandrake Linux will attempt to autodetect network devices and modems. If +this detection fails, uncheck the \"%s\" box. You may also choose not to +configure the network, or to do it later, in which case clicking the \"%s\" +button will take you to the next step. When configuring your network, the available connections options are: traditional modem, ISDN modem, ADSL connection, cable modem, and finally a @@ -194,21 +187,21 @@ from your Internet Service Provider or system administrator. You can consult the ``Starter Guide'' chapter about Internet connections for details about the configuration, or simply wait until your system is -installed and use the program described there to configure your connection."), - -configurePrinter => -N_("\"Printer\": clicking on the \"Configure\" button will open the printer -configuration wizard. Consult the corresponding chapter of the ``Starter -Guide'' for more information on how to setup a new printer. The interface -presented there is similar to the one used during installation."), - -configureServices => -N_("This dialog is used to choose which services you wish to start at boot +installed and use the program described there to configure your connection.", N("Next ->"), N("Use auto detection"), N("Cancel")); +} +sub configurePrinter { + N("\"%s\": clicking on the \"%s\" button will open the printer configuration +wizard. Consult the corresponding chapter of the ``Starter Guide'' for more +information on how to setup a new printer. The interface presented there is +similar to the one used during installation.", N("Printer"), N("Configure")); +} +sub configureServices { + N("This dialog is used to choose which services you wish to start at boot time. DrakX will list all the services available on the current installation. -Review each one carefully and uncheck those which are not always needed at -boot time. +Review each one carefully and uncheck those which are not needed at boot +time. A short explanatory text will be displayed about a service when it is selected. However, if you are not sure whether a service is useful or not, @@ -218,64 +211,64 @@ it is safer to leave the default behavior. server: you will probably not want to start any services that you do not need. Please remember that several services can be dangerous if they are enabled on a server. In general, select only the services you really need. -!!"), - -configureTimezoneGMT => -N_("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to +!!"); +} +sub configureTimezoneGMT { + N("GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to local time according to the time zone you selected. If the clock on your motherboard is set to local time, you may deactivate this by unselecting -\"Hardware clock set to GMT \", which will let GNU/Linux know that the -system clock and the hardware clock are in the same timezone. This is -useful when the machine also hosts another operating system like Windows. - -The \"Automatic time synchronization \" option will automatically regulate -the clock by connecting to a remote time server on the Internet. For this -feature to work, you must have a working Internet connection. It is best to -choose a time server located near you. This option actually installs a time -server that can used by other machines on your local network."), - -configureX_card_list => -N_("Graphic Card - - The installer can normally automatically detect and configure the +\"%s\", which will let GNU/Linux know that the system clock and the +hardware clock are in the same timezone. This is useful when the machine +also hosts another operating system like Windows. + +The \"%s\" option will automatically regulate the clock by connecting to a +remote time server on the Internet. For this feature to work, you must have +a working Internet connection. It is best to choose a time server located +near you. This option actually installs a time server that can used by +other machines on your local network as well.", N("Hardware clock set to GMT"), N("Automatic time synchronization")); +} +sub configureX_card_list { + N("Graphic Card + + The installer will normally automatically detect and configure the graphic card installed on your machine. If it is not the case, you can -choose in this list the card you actually own. +choose from this list the card you actually have installed. In the case that different servers are available for your card, with or -without 3D acceleration, you are then proposed to choose the server that -best suits your needs."), - -configureX_chooser => -N_("X (for X Window System) is the heart of the GNU/Linux graphical interface +without 3D acceleration, you are then asked to choose the server that best +suits your needs."); +} +sub configureX_chooser { + N("X (for X Window System) is the heart of the GNU/Linux graphical interface on which all the graphical environments (KDE, GNOME, AfterStep, WindowMaker, etc.) bundled with Mandrake Linux rely upon. -You will be presented the list of different parameters to change to get an -optimal graphical display: Graphic Card +You will be presented with a list of different parameters to change to get +an optimal graphical display: Graphic Card - The installer can normally automatically detect and configure the + The installer will normally automatically detect and configure the graphic card installed on your machine. If it is not the case, you can -choose in this list the card you actually own. +choose from this list the card you actually have installed. In the case that different servers are available for your card, with or -without 3D acceleration, you are then proposed to choose the server that -best suits your needs. +without 3D acceleration, you are then asked to choose the server that best +suits your needs. Monitor - The installer can normally automatically detect and configure the -monitor connected to your machine. If it is not the case, you can choose in -this list the monitor you actually own. + The installer will normally automatically detect and configure the +monitor connected to your machine. If it is correct, you can choose from +this list the monitor you actually have connected to your computer. Resolution - You can choose here resolutions and color depth between those available -for your hardware. Choose the one that best suit your needs (you will be -able to change that after installation though). A sample of the chosen + Here you can choose the resolutions and color depths available for your +hardware. Choose the one that best suits your needs (you will be able to +change that after installation though). A sample of the chosen configuration is shown in the monitor. @@ -283,7 +276,7 @@ configuration is shown in the monitor. Test the system will try to open a graphical screen at the desired -resolution. If you can see the message during the test and answer \"Yes\", +resolution. If you can see the message during the test and answer \"%s\", then DrakX will proceed to the next step. If you cannot see the message, it means that some part of the autodetected configuration was incorrect and the test will automatically end after 12 seconds, bringing you back to the @@ -293,40 +286,41 @@ menu. Change settings until you get a correct graphical display. Options - You can here choose whether you want to have your machine automatically + Here you can choose whether you want to have your machine automatically switch to a graphical interface at boot. Obviously, you want to check -\"No\" if your machine is to act as a server, or if you were not successful -in getting the display configured."), - -configureX_monitor => -N_("Monitor - - The installer can normally automatically detect and configure the -monitor connected to your machine. If it is not the case, you can choose in -this list the monitor you actually own."), - -configureX_resolution => -N_("Resolution - - You can choose here resolutions and color depth between those available -for your hardware. Choose the one that best suit your needs (you will be -able to change that after installation though). A sample of the chosen -configuration is shown in the monitor."), - -configureX_xfree_and_glx => -N_("In the case that different servers are available for your card, with or -without 3D acceleration, you are then proposed to choose the server that -best suits your needs."), - -configureXxdm => -N_("Finally, you will be asked whether you want to see the graphical interface -at boot. Note this question will be asked even if you chose not to test the -configuration. Obviously, you want to answer \"No\" if your machine is to -act as a server, or if you were not successful in getting the display -configured."), - -doPartitionDisks => -N_("At this point, you need to decide where you want to install the Mandrake +\"%s\" if your machine is to act as a server, or if you were not successful +in getting the display configured.", N("Yes"), N("No")); +} +sub configureX_monitor { + N("Monitor + + The installer will normally automatically detect and configure the +monitor connected to your machine. If it is correct, you can choose from +this list the monitor you actually have connected to your computer."); +} +sub configureX_resolution { + N("Resolution + + Here you can choose the resolutions and color depths available for your +hardware. Choose the one that best suits your needs (you will be able to +change that after installation though). A sample of the chosen +configuration is shown in the monitor."); +} +sub configureX_xfree_and_glx { + N("In the case that different servers are available for your card, with or +without 3D acceleration, you are then asked to choose the server that best +suits your needs."); +} +sub configureXxdm { + N("Options + + Here you can choose whether you want to have your machine automatically +switch to a graphical interface at boot. Obviously, you want to check +\"%s\" if your machine is to act as a server, or if you were not successful +in getting the display configured.", N("No")); +} +sub doPartitionDisks { + N("At this point, you need to decide where you want to install the Mandrake Linux operating system on your hard drive. If your hard drive is empty or if an existing operating system is using all the available space you will have to partition the drive. Basically, partitioning a hard drive consists @@ -342,86 +336,83 @@ rest of this section and above all, take your time. Depending on your hard drive configuration, several options are available: - * \"Use free space\": this option will perform an automatic partitioning -of your blank drive(s). If you use this option there will be no further -prompts. - - * \"Use existing partition\": the wizard has detected one or more existing -Linux partitions on your hard drive. If you want to use them, choose this -option. You will then be asked to choose the mount points associated with -each of the partitions. The legacy mount points are selected by default, -and for the most part it's a good idea to keep them. - - * \"Use the free space on the Windows partition\": if Microsoft Windows is -installed on your hard drive and takes all the space available on it, you -have to create free space for Linux data. To do so, you can delete your -Microsoft Windows partition and data (see ``Erase entire disk'' solution) -or resize your Microsoft Windows FAT partition. Resizing can be performed -without the loss of any data, provided you previously defragment the -Windows partition and that it uses the FAT format. Backing up your data is -strongly recommended.. Using this option is recommended if you want to use -both Mandrake Linux and Microsoft Windows on the same computer. + * \"%s\": this option will perform an automatic partitioning of your blank +drive(s). If you use this option there will be no further prompts. + + * \"%s\": the wizard has detected one or more existing Linux partitions on +your hard drive. If you want to use them, choose this option. You will then +be asked to choose the mount points associated with each of the partitions. +The legacy mount points are selected by default, and for the most part it's +a good idea to keep them. + + * \"%s\": if Microsoft Windows is installed on your hard drive and takes +all the space available on it, you will have to create free space for +Linux. To do so, you can delete your Microsoft Windows partition and data +(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT +partition. Resizing can be performed without the loss of any data, provided +you have previously defragmented the Windows partition and that it uses the +FAT format. Backing up your data is strongly recommended.. Using this +option is recommended if you want to use both Mandrake Linux and Microsoft +Windows on the same computer. Before choosing this option, please understand that after this procedure, the size of your Microsoft Windows partition will be smaller then when you started. You will have less free space under Microsoft Windows to store your data or to install new software. - * \"Erase entire disk\": if you want to delete all data and all partitions -present on your hard drive and replace them with your new Mandrake Linux -system, choose this option. Be careful, because you will not be able to -undo your choice after you confirm. + * \"%s\": if you want to delete all data and all partitions present on +your hard drive and replace them with your new Mandrake Linux system, +choose this option. Be careful, because you will not be able to undo your +choice after you confirm. !! If you choose this option, all data on your disk will be deleted. !! - * \"Remove Windows\": this will simply erase everything on the drive and -begin fresh, partitioning everything from scratch. All data on your disk -will be lost. + * \"%s\": this will simply erase everything on the drive and begin fresh, +partitioning everything from scratch. All data on your disk will be lost. !! If you choose this option, all data on your disk will be lost. !! - * \"Custom disk partitioning\": choose this option if you want to manually -partition your hard drive. Be careful -- it is a powerful but dangerous -choice and you can very easily lose all your data. That's why this option -is really only recommended if you have done something like this before and -have some experience. For more instructions on how to use the DiskDrake -utility, refer to the ``Managing Your Partitions '' section in the -``Starter Guide''."), - -exitInstall => -N_("There you are. Installation is now complete and your GNU/Linux system is -ready to use. Just click \"Next ->\" to reboot the system. The first thing -you should see after your computer has finished doing its hardware tests is -the bootloader menu, giving you the choice of which operating system to -start. - -The \"Advanced\" button shows two more buttons to: - - * \"generate auto-install floppy\": to create an installation floppy disk -that will automatically perform a whole installation without the help of an -operator, similar to the installation you just configured. + * \"%s\": choose this option if you want to manually partition your hard +drive. Be careful -- it is a powerful but dangerous choice and you can very +easily lose all your data. That's why this option is really only +recommended if you have done something like this before and have some +experience. For more instructions on how to use the DiskDrake utility, +refer to the ``Managing Your Partitions '' section in the ``Starter +Guide''.", N("Use free space"), N("Use existing partition"), N("Use the free space on the Windows partition"), N("Erase entire disk"), N("Remove Windows"), N("Custom disk partitioning")); +} +sub exitInstall { + N("There you are. Installation is now complete and your GNU/Linux system is +ready to use. Just click \"%s\" to reboot the system. The first thing you +should see after your computer has finished doing its hardware tests is the +bootloader menu, giving you the choice of which operating system to start. + +The \"%s\" button shows two more buttons to: + + * \"%s\": to create an installation floppy disk that will automatically +perform a whole installation without the help of an operator, similar to +the installation you just configured. Note that two different options are available after clicking the button: - * \"Replay\". This is a partially automated installation. The -partitioning step is the only interactive procedure. + * \"%s\". This is a partially automated installation. The partitioning +step is the only interactive procedure. - * \"Automated\". Fully automated installation: the hard disk is -completely rewritten, all data is lost. + * \"%s\". Fully automated installation: the hard disk is completely +rewritten, all data is lost. This feature is very handy when installing a number of similar machines. See the Auto install section on our web site for more information. - * \"Save packages selection\"(*): saves a list of the package selected in -this installation. To use this selection with another installation, insert -the floppy and start the installation. At the prompt, press the [F1] key -and type >>linux defcfg=\"floppy\" <<. + * \"%s\"(*): saves a list of the packages selected in this installation. +To use this selection with another installation, insert the floppy and +start the installation. At the prompt, press the [F1] key and type >>linux +defcfg=\"floppy\" <<. (*) You need a FAT-formatted floppy (to create one under GNU/Linux, type -\"mformat a:\")"), - -formatPartitions => -N_("Any partitions that have been newly defined must be formatted for use +\"mformat a:\")", N("Reboot"), N("Advanced"), N("generate auto-install floppy"), N("Replay"), N("Automated"), N("Save packages selection")); +} +sub formatPartitions { + N("Any partitions that have been newly defined must be formatted for use (formatting means creating a file system). At this time, you may wish to reformat some already existing partitions to @@ -438,40 +429,40 @@ Please be careful when selecting partitions. After formatting, all data on the selected partitions will be deleted and you will not be able to recover it. -Click on \"Next ->\" when you are ready to format partitions. - -Click on \"<- Previous\" if you want to choose another partition for your -new Mandrake Linux operating system installation. +Click on \"%s\" when you are ready to format partitions. -Click on \"Advanced\" if you wish to select partitions that will be checked -for bad blocks on the disk."), +Click on \"%s\" if you want to choose another partition for your new +Mandrake Linux operating system installation. -installUpdates => -N_("At the time you are installing Mandrake Linux, it is likely that some +Click on \"%s\" if you wish to select partitions that will be checked for +bad blocks on the disk.", N("Next ->"), N("<- Previous"), N("Advanced")); +} +sub installUpdates { + N("At the time you are installing Mandrake Linux, it is likely that some packages have been updated since the initial release. Bugs may have been fixed, security issues resolved. To allow you to benefit from these -updates, you are now able to download them from the Internet. Check \"Yes\" -if you have a working Internet connection, or \"No\" if you prefer to +updates, you are now able to download them from the Internet. Check \"%s\" +if you have a working Internet connection, or \"%s\" if you prefer to install updated packages later. -Choosing \"Yes\" will display a list of places from which updates can be -retrieved. Choose the one nearest you. A package-selection tree will -appear: review the selection, and press \"Install\" to retrieve and install -the selected package(s), or \"Cancel\" to abort."), - -miscellaneous => -N_("At this point, DrakX will allow you to choose the security level desired +Choosing \"%s\" will display a list of places from which updates can be +retrieved. You should choose one nearer to you. A package-selection tree +will appear: review the selection, and press \"%s\" to retrieve and install +the selected package(s), or \"%s\" to abort.", N("Yes"), N("No"), N("Yes"), N("Install"), N("Cancel")); +} +sub miscellaneous { + N("At this point, DrakX will allow you to choose the security level desired for the machine. As a rule of thumb, the security level should be set higher if the machine will contain crucial data, or if it will be a machine directly exposed to the Internet. The trade-off of a higher security level is generally obtained at the expense of ease of use. -If you do not know what to choose, keep the default option."), - -partition_with_diskdrake => -N_("At this point, you need to choose which partition(s) will be used for the +If you do not know what to choose, stay with the default option."); +} +sub partition_with_diskdrake { + N("At this point, you need to choose which partition(s) will be used for the installation of your Mandrake Linux system. If partitions have already been -defined, either from a previous installation of GNU/Linux or from another +defined, either from a previous installation of GNU/Linux or by another partitioning tool, you can use existing partitions. Otherwise, hard drive partitions must be defined. @@ -481,43 +472,40 @@ the disk for partitioning by clicking on ``hda'' for the first IDE drive, To partition the selected hard drive, you can use these options: - * \"Clear all\": this option deletes all partitions on the selected hard -drive + * \"%s\": this option deletes all partitions on the selected hard drive - * \"Auto allocate\": this option enables you to automatically create ext3 -and swap partitions in free space of your hard drive + * \"%s\": this option enables you to automatically create ext3 and swap +partitions in the free space of your hard drive -\"More\": gives access to additional features: +\"%s\": gives access to additional features: - * \"Save partition table\": saves the partition table to a floppy. Useful -for later partition-table recovery, if necessary. It is strongly -recommended that you perform this step. + * \"%s\": saves the partition table to a floppy. Useful for later +partition-table recovery if necessary. It is strongly recommended that you +perform this step. - * \"Restore partition table\": allows you to restore a previously saved -partition table from a floppy disk. + * \"%s\": allows you to restore a previously saved partition table from a +floppy disk. - * \"Rescue partition table\": if your partition table is damaged, you can -try to recover it using this option. Please be careful and remember that it -doesn't always work. + * \"%s\": if your partition table is damaged, you can try to recover it +using this option. Please be careful and remember that it doesn't always +work. - * \"Reload partition table\": discards all changes and reloads the -partition table that was originally on the hard drive. + * \"%s\": discards all changes and reloads the partition table that was +originally on the hard drive. - * \"Removable media automounting\": unchecking this option will force -users to manually mount and unmount removable medias such as floppies and -CD-ROMs. + * \"%s\": unchecking this option will force users to manually mount and +unmount removable media such as floppies and CD-ROMs. - * \"Wizard\": use this option if you wish to use a wizard to partition -your hard drive. This is recommended if you do not have a good -understanding of partitioning. + * \"%s\": use this option if you wish to use a wizard to partition your +hard drive. This is recommended if you do not have a good understanding of +partitioning. - * \"Undo\": use this option to cancel your changes. + * \"%s\": use this option to cancel your changes. - * \"Toggle to normal/expert mode\": allows additional actions on -partitions (type, options, format) and gives more information about the -hard drive. + * \"%s\": allows additional actions on partitions (type, options, format) +and gives more information about the hard drive. - * \"Done\": when you are finished partitioning your hard drive, this will + * \"%s\": when you are finished partitioning your hard drive, this will save your changes back to disk. When defining the size of a partition, you can finely set the partition @@ -541,11 +529,11 @@ If you are installing on a PPC machine, you will want to create a small HFS ``bootstrap'' partition of at least 1MB which will be used by the yaboot bootloader. If you opt to make the partition a bit larger, say 50MB, you may find it a useful place to store a spare kernel and ramdisk images for -emergency boot situations."), - -resizeFATChoose => -N_("More than one Microsoft partition has been detected on your hard drive. -Please choose the one you want to resize in order to install your new +emergency boot situations.", N("Clear all"), N("Auto allocate"), N("More"), N("Save partition table"), N("Restore partition table"), N("Rescue partition table"), N("Reload partition table"), N("Removable media automounting"), N("Wizard"), N("Undo"), N("Toggle between normal/expert mode"), N("Done")); +} +sub resizeFATChoose { + N("More than one Microsoft partition has been detected on your hard drive. +Please choose which one you want to resize in order to install your new Mandrake Linux operating system. Each partition is listed as follows: \"Linux name\", \"Windows name\" @@ -572,81 +560,79 @@ With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means \"second lowest SCSI ID\", etc. \"Windows name\" is the letter of your hard drive under Windows (the first -disk or partition is called \"C:\")."), - -selectCountry => -N_("\"Country\": check the current country selection. If you are not in this -country, click on the \"Configure\" button and choose another one. If your -country is not in the first list shown, click the \"More\" button to get -the complete country list."), - -selectInstallClass => -N_("This step is activated only if an old GNU/Linux partition has been found on +disk or partition is called \"C:\")."); +} +sub selectCountry { + N("\"%s\": check the current country selection. If you are not in this +country, click on the \"%s\" button and choose another one. If your country +is not in the first list shown, click the \"%s\" button to get the complete +country list.", N("Country"), N("Configure"), N("More")); +} +sub selectInstallClass { + N("This step is activated only if an old GNU/Linux partition has been found on your machine. DrakX now needs to know if you want to perform a new install or an upgrade of an existing Mandrake Linux system: - * \"Install\": For the most part, this completely wipes out the old -system. If you wish to change how your hard drives are partitioned, or -change the file system, you should use this option. However, depending on -your partitioning scheme, you can prevent some of your existing data from -being over- written. + * \"%s\": For the most part, this completely wipes out the old system. If +you wish to change how your hard drives are partitioned, or change the file +system, you should use this option. However, depending on your partitioning +scheme, you can prevent some of your existing data from being over-written. - * \"Upgrade\": this installation class allows you to update the packages + * \"%s\": this installation class allows you to update the packages currently installed on your Mandrake Linux system. Your current partitioning scheme and user data is not altered. Most of other configuration steps remain available, similar to a standard installation. Using the ``Upgrade'' option should work fine on Mandrake Linux systems running version \"8.1\" or later. Performing an Upgrade on versions prior -to Mandrake Linux version \"8.1\" is not recommended."), - -selectKeyboard => -N_("Depending on the default language you chose in Section , DrakX will +to Mandrake Linux version \"8.1\" is not recommended.", N("Install"), N("Upgrade")); +} +sub selectKeyboard { + N("Depending on the default language you chose in Section , DrakX will automatically select a particular type of keyboard configuration. However, -you might not have a keyboard that corresponds exactly to your language: -for example, if you are an English speaking Swiss person, you may have a -Swiss keyboard. Or if you speak English but are located in Quebec, you may -find yourself in the same situation where your native language and keyboard -do not match. In either case, this installation step will allow you to -select an appropriate keyboard from a list. - -Click on the \"More \" button to be presented with the complete list of +you may not have a keyboard that corresponds exactly to your language: for +example, if you are an English speaking Swiss person, you may have a Swiss +keyboard. Or if you speak English but are located in Quebec, you may find +yourself in the same situation where your native language and keyboard do +not match. In either case, this installation step will allow you to select +an appropriate keyboard from a list. + +Click on the \"%s\" button to be presented with the complete list of supported keyboards. If you choose a keyboard layout based on a non-Latin alphabet, the next dialog will allow you to choose the key binding that will switch the -keyboard between the Latin and non-Latin layouts."), - -selectLanguage => -N_("Your choice of preferred language will affect the language of the +keyboard between the Latin and non-Latin layouts.", N("More")); +} +sub selectLanguage { + N("Your choice of preferred language will affect the language of the documentation, the installer and the system in general. Select first the region you are located in, and then the language you speak. -Clicking on the \"Advanced\" button will allow you to select other -languages to be installed on your workstation, thereby installing the -language-specific files for system documentation and applications. For -example, if you will host users from Spain on your machine, select English -as the default language in the tree view and \"Espanol\" in the Advanced -section. +Clicking on the \"%s\" button will allow you to select other languages to +be installed on your workstation, thereby installing the language-specific +files for system documentation and applications. For example, if you will +host users from Spain on your machine, select English as the default +language in the tree view and \"%s\" in the Advanced section. Note that you're not limited to choosing a single additional language. You -may choose several ones, or even install them all by selecting the \"All -languages\" box. Selecting support for a language means translations, -fonts, spell checkers, etc. for that language will be installed. -Additionally, the \"Use Unicode by default\" checkbox allows to force the -system to use unicode (UTF-8). Note however that this is an experimental -feature. If you select different languages requiring different encoding the -unicode support will be installed anyway. +may choose several ones, or even install them all by selecting the \"%s\" +box. Selecting support for a language means translations, fonts, spell +checkers, etc. for that language will be installed. Additionally, the +\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note +however that this is an experimental feature. If you select different +languages requiring different encoding the unicode support will be +installed anyway. To switch between the various languages installed on the system, you can launch the \"/usr/sbin/localedrake\" command as \"root\" to change the language used by the entire system. Running the command as a regular user -will only change the language settings for that particular user."), - -selectMouse => -N_("Usually, DrakX has no problems detecting the number of buttons on your +will only change the language settings for that particular user.", N("Advanced"), N("Espanol"), N("All languages"), N("Use Unicode by default")); +} +sub selectMouse { + N("Usually, DrakX has no problems detecting the number of buttons on your mouse. If it does, it assumes you have a two-button mouse and will configure it for third-button emulation. The third-button mouse button of a two-button mouse can be ``pressed'' by simultaneously clicking the left and @@ -654,7 +640,7 @@ right mouse buttons. DrakX will automatically know whether your mouse uses a PS/2, serial or USB interface. If for some reason you wish to specify a different type of mouse, select it -from the provided list. +from the list provided. If you choose a mouse other than the default, a test screen will be displayed. Use the buttons and wheel to verify that the settings are @@ -665,32 +651,33 @@ go back to the list of choices. Wheel mice are occasionally not detected automatically, so you will need to select your mouse from a list. Be sure to select the one corresponding to the port that your mouse is attached to. After selecting a mouse and -pressing the \"Next ->\" button, a mouse image is displayed on-screen. -Scroll the mouse wheel to ensure that it is activated correctly. Once you -see the on-screen scroll wheel moving as you scroll your mouse wheel, test -the buttons and check that the mouse pointer moves on-screen as you move -your mouse."), - -selectSerialPort => -N_("Please select the correct port. For example, the \"COM1\" port under -Windows is named \"ttyS0\" under GNU/Linux."), - -setRootPassword => -N_("This is the most crucial decision point for the security of your GNU/Linux +pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll +the mouse wheel to ensure that it is activated correctly. Once you see the +on-screen scroll wheel moving as you scroll your mouse wheel, test the +buttons and check that the mouse pointer moves on-screen as you move your +mouse.", N("Next ->")); +} +sub selectSerialPort { + N("Please select the correct port. For example, the \"COM1\" port under +Windows is named \"ttyS0\" under GNU/Linux."); +} +sub setRootPassword { + N("This is the most crucial decision point for the security of your GNU/Linux system: you have to enter the \"root\" password. \"Root\" is the system -administrator and is the only one authorized to make updates, add users, +administrator and is the only user authorized to make updates, add users, change the overall system configuration, and so on. In short, \"root\" can do everything! That is why you must choose a password that is difficult to guess - DrakX will tell you if the password that you chose too easy. As you can see, you are not forced to enter a password, but we strongly advise you -against. GNU/Linux is as prone to operator error as any other operating -system. Since \"root\" can overcome all limitations and unintentionally -erase all data on partitions by carelessly accessing the partitions -themselves, it is important that it be difficult to become \"root\". +against this. GNU/Linux is just as prone to operator error as any other +operating system. Since \"root\" can overcome all limitations and +unintentionally erase all data on partitions by carelessly accessing the +partitions themselves, it is important that it be difficult to become +\"root\". The password should be a mixture of alphanumeric characters and at least 8 -characters long. Never write down the \"root\" password -- it makes it too -easy to compromise a system. +characters long. Never write down the \"root\" password -- it makes it far +too easy to compromise a system. One caveat -- do not make the password too long or complicated because you must be able to remember it! @@ -698,65 +685,65 @@ must be able to remember it! The password will not be displayed on screen as you type it in. To reduce the chance of a blind typing error you will need to enter the password twice. If you do happen to make the same typing error twice, this -``incorrect'' password will have to be used the first time you connect. +``incorrect'' password will be the one you will have use the first time you +connect. If you wish access to this computer to be controlled by an authentication -server, click the \"Advanced\" button. +server, click the \"%s\" button. If your network uses either LDAP, NIS, or PDC Windows Domain authentication -services, select the appropriate one as \"authentication\". If you do not -know which to use, ask your network administrator. +services, select the appropriate one for \"%s\". If you do not know which +one to use, you should ask your network administrator. -If you happen to have problems with reminding passwords, you can choose to -have \"No password\", if your computer won't be connected to the Internet, -and if you trust anybody having access to it."), +If you happen to have problems with remembering passwords, if your computer +will never be connected to the internet or that you absolutely trust +everybody who uses your computer, you can choose to have \"%s\".", N("Advanced"), N("authentication"), N("No password")); +} +sub setupBootloader { + N("This dialog allows you to fine tune your bootloader: -setupBootloader => -N_("This dialog allows to finely tune your bootloader: + * \"%s\": there are three choices for your bootloader: - * \"Bootloader to use\": there are three choices for your bootloader: + * \"%s\": if you prefer grub (text menu). - * \"GRUB\": if you prefer grub (text menu). + * \"%s\": if you prefer LILO with its text menu interface. - * \"LILO with text menu\": if you prefer LILO with its text menu -interface. + * \"%s\": if you prefer LILO with its graphical interface. - * \"LILO with graphical menu\": if you prefer LILO with its graphical -interface. + * \"%s\": in most cases, you will not change the default (\"%s\"), but if +you prefer, the bootloader can be installed on the second hard drive +(\"%s\"), or even on a floppy disk (\"%s\"); - * \"Boot device\": in most cases, you will not change the default -(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the -second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\"); - - * \"Delay before booting the default image\": after a boot or a reboot of -the computer, this is the delay given to the user at the console to select -a boot entry other than the default. + * \"%s\": after a boot or a reboot of the computer, this is the delay +given to the user at the console to select a boot entry other than the +default. !! Beware that if you choose not to install a bootloader (by selecting -\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux -system! Be sure you know what you do before changing any of the options. !! - -Clicking the \"Advanced\" button in this dialog will offer advanced options -that are reserved for the expert user."), - -setupBootloaderAddEntry => -N_("After you have configured the general bootloader parameters, the list of +\"%s\"), you must ensure that you have a way to boot your Mandrake Linux +system! Be sure you know what you are doing before changing any of the +options. !! + +Clicking the \"%s\" button in this dialog will offer advanced options which +are normally reserved for the expert user.", N("Bootloader to use"), N("GRUB"), N("LILO with text menu"), N("LILO with graphical menu"), N("Boot device"), N("/dev/hda"), N("/dev/hdb"), N("/dev/fd0"), N("Delay before booting the default image"), N("Skip"), N("Advanced")); +} +sub setupBootloaderAddEntry { + N("After you have configured the general bootloader parameters, the list of boot options that will be available at boot time will be displayed. If there are other operating systems installed on your machine they will automatically be added to the boot menu. You can fine-tune the existing -options by clicking \"Add\" to create a new entry; selecting an entry and -clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates -your changes. +options by clicking \"%s\" to create a new entry; selecting an entry and +clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your +changes. You may also not want to give access to these other operating systems to anyone who goes to the console and reboots the machine. You can delete the corresponding entries for the operating systems to remove them from the bootloader menu, but you will need a boot disk in order to boot those other -operating systems!"), - -setupBootloaderBeginner => -N_("LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally +operating systems!", N("Add"), N("Modify"), N("Remove"), N("OK")); +} +sub setupBootloaderBeginner { + N("LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally automated. DrakX will analyze the disk boot sector and act according to what it finds there: @@ -768,46 +755,41 @@ OS. one. If it cannot make a determination, DrakX will ask you where to place the -bootloader. - -\"Boot device\": in most cases, you will not change the default (\"First -sector of drive (MBR)\"), but if you prefer, the bootloader can be -installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk -(\"On Floppy\")."), - -setupDefaultSpooler => -N_("Now, it's time to select a printing system for your computer. Other OSs may -offer you one, but Mandrake Linux offers two. Each of the printing systems -is best for a particular type of configuration. - - * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice +bootloader."); +} +sub setupDefaultSpooler { + N("Now, it's time to select a printing system for your computer. Other OSs may +offer you one, but Mandrake Linux offers two. Each of the printing system +is best suited to particular types of configuration. + + * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice if you have a direct connection to your printer, you want to be able to -panic out of printer jams, and you do not have networked printers. (\"pdq -\" will handle only very simple network cases and is somewhat slow when -used with networks.) It's recommended that you use \"pdq\" if this is your -first experience with GNU/Linux. +panic out of printer jams, and you do not have networked printers. (\"%s\" +will handle only very simple network cases and is somewhat slow when used +with networks.) It's recommended that you use \"pdq\" if this is your first +experience with GNU/Linux. - * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for + * \"%s\" - `` Common Unix Printing System'', is an excellent choice for printing to your local printer or to one halfway around the planet. It is simple to configure and can act as a server or a client for the ancient \"lpd \" printing system, so it compatible with older operating systems -that may still need print services. While quite powerful, the basic setup +which may still need print services. While quite powerful, the basic setup is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make -sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical +sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical front-ends for printing or choosing printer options and for managing the printer. If you make a choice now, and later find that you don't like your printing system you may change it by running PrinterDrake from the Mandrake Control -Center and clicking the expert button."), - -setupSCSI => -N_("DrakX will first detect any IDE devices present in your computer. It will +Center and clicking the expert button.", N("pdq"), N("pdq"), N("CUPS"), N("CUPS")); +} +sub setupSCSI { + N("DrakX will first detect any IDE devices present in your computer. It will also scan for one or more PCI SCSI cards on your system. If a SCSI card is found, DrakX will automatically install the appropriate driver. Because hardware detection is not foolproof, DrakX may fail in detecting -your hard drives. If so, You'll have to specify your hardware by hand. +your hard drives. If so, you'll have to specify your hardware by hand. If you had to manually specify your PCI SCSI adapter, DrakX will ask if you want to configure options for it. You should allow DrakX to probe the @@ -817,10 +799,10 @@ issues. If DrakX is not able to probe for the options to automatically determine which parameters need to be passed to the hardware, you'll need to manually -configure the driver."), - -setupYabootAddEntry => -N_("You can add additional entries in yaboot for other operating systems, +configure the driver."); +} +sub setupYabootAddEntry { + N("You can add additional entries in yaboot for other operating systems, alternate kernels, or for an emergency boot image. For other OSs, the entry consists only of a label and the \"root\" @@ -831,8 +813,8 @@ For Linux, there are a few possible options: * Label: this is the name you will have to type at the yaboot prompt to select this boot option. - * Image: this would be the name of the kernel to boot. Typically, vmlinux -or a variation of vmlinux with an extension. + * Image: this is the name of the kernel to boot. Typically, vmlinux or a +variation of vmlinux with an extension. * Root: the \"root\" device or ``/'' for your Linux installation. @@ -864,10 +846,10 @@ native frame buffer support. * Default: selects this entry as being the default Linux selection, selectable by pressing ENTER at the yaboot prompt. This entry will also be -highlighted with a ``*'' if you press [Tab] to see the boot selections."), - -setupYabootGeneral => -N_("Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to +highlighted with a ``*'' if you press [Tab] to see the boot selections."); +} +sub setupYabootGeneral { + N("Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly detected and installed in the bootloader menu. If this is not the case, you can add an entry by hand in this screen. Be careful to choose the correct @@ -886,8 +868,8 @@ yaboot. The first delay is measured in seconds and at this point, you can choose between CD, OF boot, MacOS or Linux; * Kernel Boot Timeout: this timeout is similar to the LILO boot delay. -After selecting Linux, you will have this delay in 0.1 second before your -default kernel description is selected; +After selecting Linux, you will have this delay in 0.1 second increments +before your default kernel description is selected; * Enable CD Boot?: checking this option allows you to choose ``C'' for CD at the first boot prompt. @@ -896,88 +878,87 @@ at the first boot prompt. Open Firmware at the first boot prompt. * Default OS: you can select which OS will boot by default when the Open -Firmware Delay expires."), - -sound_config => -N_("\"Sound card\": if a sound card is detected on your system, it is displayed -here. If you notice the sound card displayed is not the one that is -actually present on your system, you can click on the button and choose -another driver."), - -summary => -N_("As a review, DrakX will present a summary of various information it has -about your system. Depending on your installed hardware, you may have some -or all of the following entries. Each entry is made up of the configuration -item to be configured, followed by a quick summary of the current -configuration. Click on the corresponding \"Configure\" button to change -that. - - * \"Keyboard\": check the current keyboard map configuration and change -that if necessary. - - * \"Country\": check the current country selection. If you are not in this -country, click on the \"Configure\" button and choose another one. If your -country is not in the first list shown, click the \"More\" button to get -the complete country list. - - * \"Timezone\": By default, DrakX deduces your time zone based on the -country you have chosen. You can click on the \"Configure\" button here if -this is not correct. - - * \"Mouse\": check the current mouse configuration and click on the button -to change it if necessary. - - * \"Printer\": clicking on the \"Configure\" button will open the printer +Firmware Delay expires."); +} +sub sound_config { + N("\"%s\": if a sound card is detected on your system, it is displayed here. +If you notice the sound card displayed is not the one that is actually +present on your system, you can click on the button and choose another +driver.", N("Sound card")); +} +sub summary { + N("As a review, DrakX will present a summary of information it has about your +system. Depending on your installed hardware, you may have some or all of +the following entries. Each entry is made up of the configuration item to +be configured, followed by a quick summary of the current configuration. +Click on the corresponding \"%s\" button to change that. + + * \"%s\": check the current keyboard map configuration and change that if +necessary. + + * \"%s\": check the current country selection. If you are not in this +country, click on the \"%s\" button and choose another one. If your country +is not in the first list shown, click the \"%s\" button to get the complete +country list. + + * \"%s\": By default, DrakX deduces your time zone based on the country +you have chosen. You can click on the \"%s\" button here if this is not +correct. + + * \"%s\": check the current mouse configuration and click on the button to +change it if necessary. + + * \"%s\": clicking on the \"%s\" button will open the printer configuration wizard. Consult the corresponding chapter of the ``Starter Guide'' for more information on how to setup a new printer. The interface presented there is similar to the one used during installation. - * \"Sound card\": if a sound card is detected on your system, it is -displayed here. If you notice the sound card displayed is not the one that -is actually present on your system, you can click on the button and choose + * \"%s\": if a sound card is detected on your system, it is displayed +here. If you notice the sound card displayed is not the one that is +actually present on your system, you can click on the button and choose another driver. - * \"Graphical Interface\": by default, DrakX configures your graphical -interface in \"800x600\" or \"1024x768\" resolution. If that does not suits -you, click on \"Configure\" to reconfigure your graphical interface. - - * \"TV card\": if a TV card is detected on your system, it is displayed -here. If you have a TV card and it is not detected, click on \"Configure\" -to try to configure it manually. - - * \"ISDN card\": if an ISDN card is detected on your system, it will be -displayed here. You can click on \"Configure\" to change the parameters -associated with the card. - - * \"Network\": If you want to configure your Internet or local network -access now. - - * \"Security Level\": this entry offers you to redefine the security level -as set in a previous step (). - - * \"Firewall\": if you plan to connect your machine to the Internet, it's -a good idea to protect you from intrusions by setting up a firewall. -Consult the corresponding section of the ``Starter Guide'' for details -about firewall settings. - - * \"Bootloader\": if you wish to change your bootloader configuration, -click that button. This should be reserved to advanced users. - - * \"Services\": you'll be able here to control finely which services will -be run on your machine. If you plan to use this machine as a server it's a -good idea to review this setup."), - -takeOverHdChoose => -N_("Choose the hard drive you want to erase in order to install your new -Mandrake Linux partition. Be careful, all data present on it will be lost -and will not be recoverable!"), - -takeOverHdConfirm => -N_("Click on \"Next ->\" if you want to delete all data and partitions present -on this hard drive. Be careful, after clicking on \"Next ->\", you will not -be able to recover any data and partitions present on this hard drive, -including any Windows data. - -Click on \"<- Previous\" to stop this operation without losing any data and -partitions present on this hard drive."), -); + * \"%s\": by default, DrakX configures your graphical interface in +\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on +\"%s\" to reconfigure your graphical interface. + + * \"%s\": if a TV card is detected on your system, it is displayed here. +If you have a TV card and it is not detected, click on \"%s\" to try to +configure it manually. + + * \"%s\": if an ISDN card is detected on your system, it will be displayed +here. You can click on \"%s\" to change the parameters associated with the +card. + + * \"%s\": If you want to configure your Internet or local network access +now. + + * \"%s\": this entry allows you to redefine the security level as set in a +previous step (). + + * \"%s\": if you plan to connect your machine to the Internet, it's a good +idea to protect yourself from intrusions by setting up a firewall. Consult +the corresponding section of the ``Starter Guide'' for details about +firewall settings. + + * \"%s\": if you wish to change your bootloader configuration, click that +button. This should be reserved to advanced users. + + * \"%s\": here you'll be able to fine control which services will be run +on your machine. If you plan to use this machine as a server it's a good +idea to review this setup.", N("Configure"), N("Keyboard"), N("Country"), N("Configure"), N("More"), N("Timezone"), N("Configure"), N("Mouse"), N("Printer"), N("Configure"), N("Sound card"), N("Graphical Interface"), N("Configure"), N("TV card"), N("Configure"), N("ISDN card"), N("Configure"), N("Network"), N("Security Level"), N("Firewall"), N("Bootloader"), N("Services")); +} +sub takeOverHdChoose { + N("Choose the hard drive you want to erase in order to install your new +Mandrake Linux partition. Be careful, all data present on this partition +will be lost and will not be recoverable!"); +} +sub takeOverHdConfirm { + N("Click on \"%s\" if you want to delete all data and partitions present on +this hard drive. Be careful, after clicking on \"%s\", you will not be able +to recover any data and partitions present on this hard drive, including +any Windows data. + +Click on \"%s\" to stop this operation without losing any data and +partitions present on this hard drive.", N("Next ->"), N("Next ->"), N("<- Previous")); +} |