summaryrefslogtreecommitdiffstats
path: root/perl-install/bootloader.pm
diff options
context:
space:
mode:
Diffstat (limited to 'perl-install/bootloader.pm')
-rw-r--r--perl-install/bootloader.pm1079
1 files changed, 0 insertions, 1079 deletions
diff --git a/perl-install/bootloader.pm b/perl-install/bootloader.pm
deleted file mode 100644
index bf055697f..000000000
--- a/perl-install/bootloader.pm
+++ /dev/null
@@ -1,1079 +0,0 @@
-package bootloader; # $Id$
-
-use diagnostics;
-use strict;
-use vars qw(%vga_modes);
-
-#-######################################################################################
-#- misc imports
-#-######################################################################################
-use common;
-use partition_table qw(:types);
-use log;
-use any;
-use fsedit;
-use devices;
-use loopback;
-use detect_devices;
-use partition_table::raw;
-use run_program;
-use modules;
-
-
-%vga_modes = (
-'ask' => "Ask at boot",
-'normal' => "Normal",
-'0x0f01' => "80x50",
-'0x0f02' => "80x43",
-'0x0f03' => "80x28",
-'0x0f05' => "80x30",
-'0x0f06' => "80x34",
-'0x0f07' => "80x60",
-'0x0122' => "100x30",
- 785 => "640x480 in 16 bits (FrameBuffer only)",
- 788 => "800x600 in 16 bits (FrameBuffer only)",
- 791 => "1024x768 in 16 bits (FrameBuffer only)",
- 794 => "1280x1024 in 16 bits (FrameBuffer only)",
-);
-
-#-#####################################################################################
-#- Functions
-#-#####################################################################################
-
-sub get {
- my ($kernel, $bootloader) = @_;
- $_->{kernel_or_dev} && $_->{kernel_or_dev} eq $kernel and return $_ foreach @{$bootloader->{entries}};
- undef;
-}
-sub get_label {
- my ($label, $bootloader) = @_;
- $_->{label} && $_->{label} eq $label and return $_ foreach @{$bootloader->{entries}};
- undef;
-}
-
-sub mkinitrd {
- my ($kernelVersion, $initrdImage) = @_;
-
- $::oem or $::testing || -e "$::prefix/$initrdImage" and return;
-
- my $loop_boot = loopback::prepare_boot();
-
- modules::load('loop');
- if (!run_program::rooted($::prefix, "mkinitrd", "-v", "-f", $initrdImage, "--ifneeded", $kernelVersion)) {
- unlink("$::prefix/$initrdImage");
- die "mkinitrd failed";
- }
- loopback::save_boot($loop_boot);
-
- -e "$::prefix/$initrdImage";
-}
-
-sub mkbootdisk {
- my ($kernelVersion, $dev, $append) = @_;
-
- modules::load(if_(arch() =~ /sparc/, 'romfs'), 'loop', 'vfat');
- my @l = if_($append, '--appendargs', $append);
- run_program::rooted_or_die($::prefix, 'mkbootdisk', '--noprompt', @l, '--device', "/dev/$dev", $kernelVersion);
-}
-
-sub read() {
- my $file = sprintf("/etc/%s.conf", arch() =~ /sparc/ ? 'silo' : arch() =~ /ppc/ ? 'yaboot' : 'lilo');
- my $global = 1;
- my ($e, $v, $f);
- my %b;
- foreach (cat_("$::prefix$file")) {
- ($_, $v) = /^\s*(.*?)\s*(?:=\s*(.*?))?\s*$/;
-
- if (/^(image|other)$/) {
- if (arch() =~ /ppc/) {
- $v =~ s/hd:\d+,//g;
- }
- push @{$b{entries}}, $e = { type => $_, kernel_or_dev => $v };
- $global = 0;
- } elsif ($global) {
- if ($_ eq 'disk' && $v =~ /(\S+)\s+bios\s*=\s*(\S+)/) {
- $b{bios}{$1} = $2;
- } elsif ($_ eq 'bios') {
- $b{bios}{$b{disk}} = $v;
- } elsif ($_ eq 'init-message') {
- $v =~ s/\\n//g;
- $v =~ s/"//g;
- $b{'init-message'} = $v;
- } else {
- $b{$_} = $v || 1;
- }
- } else {
- if ((/map-drive/ .. /to/) && /to/) {
- $e->{mapdrive}{$e->{'map-drive'}} = $v;
- } else {
- if (arch() =~ /ppc/) {
- $v =~ s/hd:\d+,//g;
- $v =~ s/"//g;
- }
- $e->{$_} = $v || 1;
- }
- }
- }
- if (arch() !~ /ppc/) {
- delete $b{timeout} unless $b{prompt};
- $_->{append} =~ s/^\s*"?(.*?)"?\s*$/$1/ foreach \%b, @{$b{entries}};
- $b{timeout} = $b{timeout} / 10 if $b{timeout};
- $b{message} = cat_("$::prefix$b{message}") if $b{message};
- }
- \%b;
-}
-
-sub suggest_onmbr {
- my ($hds) = @_;
-
- my $type = partition_table::raw::typeOfMBR($hds->[0]{device});
- !$type || member($type, qw(dos dummy lilo grub empty)), !$type;
-}
-
-sub compare_entries ($$) {
- my ($a, $b) = @_;
- my %entries;
-
- @entries{keys %$a, keys %$b} = ();
- $a->{$_} eq $b->{$_} and delete $entries{$_} foreach keys %entries;
- scalar keys %entries;
-}
-
-sub add_entry($$) {
- my ($entries, $v) = @_;
- my (%usedold, $freeold);
-
- do { $usedold{$1 || 0} = 1 if $_->{label} =~ /^old([^_]*)_/ } foreach @$entries;
- foreach (0..scalar keys %usedold) { exists $usedold{$_} or $freeold = $_ || '', last }
-
- foreach (@$entries) {
- if ($_->{label} eq $v->{label}) {
- compare_entries($_, $v) or return; #- avoid inserting it twice as another entry already exists !
- $_->{label} = "old${freeold}_$_->{label}";
- }
- }
- push @$entries, $v;
-}
-
-sub add_kernel {
- my ($lilo, $version, $ext, $root, $v) = @_;
-
- #- new versions of yaboot don't handle symlinks
- my $ppcext = $ext;
- if (arch() =~ /ppc/) {
- $ext = "-$version";
- }
-
- log::l("adding vmlinuz$ext as vmlinuz-$version");
- -e "$::prefix/boot/vmlinuz-$version" or log::l("unable to find kernel image $::prefix/boot/vmlinuz-$version"), return;
- my $image = "/boot/vmlinuz" . ($ext ne "-$version" &&
- symlinkf("vmlinuz-$version", "$::prefix/boot/vmlinuz$ext") ? $ext : "-$version");
-
- my $initrd = "/boot/initrd-$version.img";
- mkinitrd($version, $initrd) or undef $initrd;
- if ($initrd && $ext ne "-$version") {
- $initrd = "/boot/initrd$ext.img";
- symlinkf("initrd-$version.img", "$::prefix$initrd") or cp_af("$::prefix/boot/initrd-$version.img", "$::prefix$initrd");
- }
-
- my $label = $ext =~ /-(default)/ ? $1 : "linux$ext";
-
- #- more yaboot concessions - PPC
- if (arch() =~ /ppc/) {
- $label = $ppcext =~ /-(default)/ ? $1 : "linux$ppcext";
- }
-
- add2hash($v,
- {
- type => 'image',
- root => "/dev/$root",
- label => $label,
- kernel_or_dev => $image,
- initrd => $initrd,
- append => $lilo->{perImageAppend},
- });
- add_entry($lilo->{entries}, $v);
- $v;
-}
-
-sub duplicate_kernel_entry {
- my ($bootloader, $new_label) = @_;
-
- get_label($new_label, $bootloader) and return;
-
- my $entry = { %{ get_label('linux', $bootloader) }, label => $new_label };
- add_entry($bootloader->{entries}, $entry);
- $entry;
-}
-
-sub unpack_append {
- my ($s) = @_;
- my @l = split(' ', $s);
- [ grep { !/=/ } @l ], [ map { if_(/(.*?)=(.*)/, [$1, $2]) } @l ];
-}
-sub pack_append {
- my ($simple, $dict) = @_;
- join(' ', @$simple, map { "$_->[0]=$_->[1]" } @$dict);
-}
-
-sub append__mem_is_memsize { $_[0] =~ /^\d+[kM]?$/i }
-
-sub get_append {
- my ($b, $key) = @_;
- my (undef, $dict) = unpack_append($b->{perImageAppend});
- my @l = map { $_->[1] } grep { $_->[0] eq $key } @$dict;
-
- #- suppose we want the memsize
- @l = grep { append__mem_is_memsize($_) } @l if $key eq 'mem';
-
- log::l("more than one $key in $b->{perImageAppend}") if @l > 1;
- $l[0];
-}
-sub add_append {
- my ($b, $key, $val) = @_;
-
- foreach (\$b->{perImageAppend}, map { \$_->{append} } grep { $_->{type} eq 'image' } @{$b->{entries}}) {
- my ($simple, $dict) = unpack_append($$_);
- @$dict = grep { $_->[0] ne $key || $key eq 'mem' && append__mem_is_memsize($_->[1]) != append__mem_is_memsize($val) } @$dict;
- push @$dict, [ $key, $val ] if $val;
- $$_ = pack_append($simple, $dict);
- log::l("add_append: $$_");
- }
-}
-sub may_append {
- my ($b, $key, $val) = @_;
- add_append($b, $key, $val) if !get_append($b, $key);
-}
-
-sub configure_entry {
- my ($entry) = @_;
- if ($entry->{type} eq 'image') {
- my $specific_version;
- $entry->{kernel_or_dev} =~ /vmlinu.-(.*)/ and $specific_version = $1;
- readlink("$::prefix/$entry->{kernel_or_dev}") =~ /vmlinu.-(.*)/ and $specific_version = $1;
-
- if ($specific_version) {
- $entry->{initrd} or $entry->{initrd} = "/boot/initrd-$specific_version.img";
- mkinitrd($specific_version, $entry->{initrd}) or undef $entry->{initrd};
- }
- }
- $entry;
-}
-
-sub dev2prompath { #- SPARC only
- my ($dev) = @_;
- my ($wd, $num) = $dev =~ /^(.*\D)(\d*)$/;
- require c;
- $dev = c::disk2PromPath($wd) and $dev = $dev =~ /^sd\(/ ? "$dev$num" : "$dev;$num";
- $dev;
-}
-
-sub get_kernels_and_labels() {
- my $dir = "$::prefix/boot";
- my @l = grep { /^vmlinuz-/ } all($dir);
- my @kernels = grep { ! -l "$dir/$_" } @l;
-
- my @preferred = ('', 'secure', 'enterprise', 'smp');
- my %weights = map_index { $_ => $::i } @preferred;
-
- require pkgs;
- @kernels =
- sort { c::rpmvercmp($b->[1], $a->[1]) || $weights{$a->[2]} <=> $weights{$b->[2]} }
- grep { -d "$::prefix/lib/modules/$_->[0]" }
- map {
- if (my ($version, $ext) = /vmlinuz-((?:[\-.\d]*(?:mdk)?)*)(.*)/) {
- [ "$version$ext", $version, $ext ];
- } else {
- log::l("non recognised kernel name $_");
- ();
- }
- } @kernels;
-
- my %majors;
- foreach (@kernels) {
- push @{$majors{$1}}, $_ if $_->[1] =~ /^(2\.\d+)/
- }
- while (my ($major, $l) = each %majors) {
- $l->[0][1] = $major if @$l == 1;
- }
-
- my %labels;
- foreach (@kernels) {
- my ($complete_version, $version, $ext) = @$_;
- my $label = '';
- if (exists $labels{$label}) {
- $label = "-$ext";
- if (!$ext || $labels{$label}) {
- $label = "-$version$ext";
- }
- }
- $labels{$label} = $complete_version;
- }
- %labels;
-}
-
-sub suggest {
- my ($lilo, $hds, $fstab, %options) = @_;
- my $root_part = fsedit::get_root($fstab);
- my $root = isLoopback($root_part) ? "loop7" : $root_part->{device};
- my $boot = fsedit::get_root($fstab, 'boot')->{device};
- my $partition = first($boot =~ /\D*(\d*)/);
- #- PPC xfs module requires enlarged initrd
- my $xfsroot = isThisFs("xfs", $root_part);
-
- require c; c::initSilo() if arch() =~ /sparc/;
-
- my ($onmbr, $unsafe) = $lilo->{crushMbr} ? (1, 0) : suggest_onmbr($hds);
- add2hash_($lilo, arch() =~ /sparc/ ?
- {
- entries => [],
- timeout => 10,
- use_partition => 0, #- we should almost always have a whole disk partition.
- root => "/dev/$root",
- partition => $partition || 1,
- boot => $root eq $boot && "/boot", #- this helps for getting default partition for silo.
- } : arch() =~ /ppc/ ?
- {
- defaultos => "linux",
- entries => [],
- 'init-message' => "Welcome to Mandrake Linux!",
- delay => 30, #- OpenFirmware delay
- timeout => 50,
- enableofboot => 1,
- enablecdboot => 1,
- useboot => $boot,
- xfsroot => $xfsroot,
- } :
- {
- bootUnsafe => $unsafe,
- entries => [],
- timeout => $onmbr && 10,
- nowarn => 1,
- if_(arch() !~ /ia64/,
- lba32 => 1,
- boot => "/dev/" . ($onmbr ? $hds->[0]{device} : fsedit::get_root($fstab, 'boot')->{device}),
- map => "/boot/map",
- ),
- });
-
- if (!$lilo->{message} || $lilo->{message} eq "1") {
- $lilo->{message} = join('', cat_("$::prefix/boot/message"));
- if (!$lilo->{message}) {
- my $msg_en =
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-__("Welcome to %s the operating system chooser!
-
-Choose an operating system in the list above or
-wait %d seconds for default boot.
-
-");
- my $msg = translate($msg_en);
- #- use the english version if more than 20% of 8bits chars
- $msg = $msg_en if int(grep { $_ & 0x80 } unpack "c*", $msg) / length($msg) > 0.2;
- $lilo->{message} = sprintf $msg, arch() =~ /sparc/ ? "SILO" : "LILO", $lilo->{timeout};
- }
- }
-
- add2hash_($lilo, { memsize => $1 }) if cat_("/proc/cmdline") =~ /\bmem=(\d+[KkMm]?)(?:\s.*)?$/;
- if (my ($s, $port, $speed) = cat_("/proc/cmdline") =~ /console=(ttyS(\d),(\d+)\S*)/) {
- log::l("serial console $s $port $speed");
- add_append($lilo, 'console' => $s);
- any::set_login_serial_console($port, $speed);
- }
-
- my %labels = get_kernels_and_labels();
- $labels{''} or die "no kernel installed";
-
- while (my ($ext, $version) = each %labels) {
- my $entry = add_kernel($lilo, $version, $ext, $root,
- {
- if_($options{vga_fb} && $ext eq '', vga => $options{vga_fb}), #- using framebuffer
- });
- $entry->{append} .= " quiet" if $options{vga_fb} && $version !~ /smp|enterprise/ && $options{quiet};
-
- if ($options{vga_fb} && $ext eq '') {
- add_kernel($lilo, $version, $ext, $root, { label => 'linux-nonfb' });
- }
- }
- my $failsafe = add_kernel($lilo, $labels{''}, '', $root, { label => 'failsafe' });
- $failsafe->{append} =~ s/devfs=mount/devfs=nomount/;
- $failsafe->{append} .= " failsafe";
-
- if (arch() =~ /sparc/) {
- #- search for SunOS, it could be a really better approach to take into account
- #- partition type for mounting point.
- my $sunos = 0;
- foreach (@$hds) {
- foreach (@{$_->{primary}{normal}}) {
- my $path = $_->{device} =~ m|^/| && $_->{device} !~ m|^/dev/| ? $_->{device} : dev2prompath($_->{device});
- add_entry($lilo->{entries},
- {
- type => 'other',
- kernel_or_dev => $path,
- label => "sunos" . ($sunos++ ? $sunos : ''),
- }) if $path && isSunOS($_) && type2name($_->{type}) =~ /root/i;
- }
- }
- } elsif (arch() =~ /ppc/) {
- #- if we identified a MacOS partition earlier - add it
- if (defined $partition_table::mac::macos_part) {
- add_entry($lilo->{entries},
- {
- label => "macos",
- kernel_or_dev => $partition_table::mac::macos_part
- });
- }
- } elsif (arch() !~ /ia64/) {
- #- search for dos (or windows) boot partition. Don't look in extended partitions!
- my %nbs;
- foreach (@$hds) {
- foreach (@{$_->{primary}{normal}}) {
- my $label = isNT($_) ? 'NT' : isDos($_) ? 'dos' : 'windows';
- add_entry($lilo->{entries},
- {
- type => 'other',
- kernel_or_dev => "/dev/$_->{device}",
- label => $label . ($nbs{$label}++ ? $nbs{$label} : ''),
- if_($_->{device} =~ /[1-4]$/,
- table => "/dev/$_->{rootDevice}"
- ),
- unsafe => 1
- }) if isNT($_) || isFat($_) && isFat({ type => fsedit::typeOfPart($_->{device}) });
- }
- }
- }
- foreach ('secure', 'enterprise', 'smp') {
- if (get_label("linux-$_", $lilo)) {
- $lilo->{default} ||= "linux-$_";
- last;
- }
- }
- $lilo->{default} ||= "linux";
-
- my %l = (
- yaboot => to_bool(arch() =~ /ppc/),
- silo => to_bool(arch() =~ /sparc/),
- lilo => to_bool(arch() !~ /sparc|ppc/) && !isLoopback(fsedit::get_root($fstab)),
- grub => to_bool(arch() !~ /sparc|ppc/ && !isRAID(fsedit::get_root($fstab))),
- loadlin => to_bool(arch() !~ /sparc|ppc/) && -e "/initrd/loopfs/lnx4win",
- );
- unless ($lilo->{methods}) {
- $lilo->{methods} ||= { map { $_ => 1 } grep { $l{$_} } keys %l };
- if ($lilo->{methods}{lilo} && -e "$::prefix/boot/message-graphic") {
- $lilo->{methods}{lilo} = "lilo-graphic";
- exists $lilo->{methods}{grub} and $lilo->{methods}{grub} = undef;
- }
- }
-}
-
-sub suggest_floppy {
- my ($bootloader) = @_;
-
- my $floppy = detect_devices::floppy() or return;
- $floppy eq 'fd0' or log::l("suggest_floppy: not adding $floppy"), return;
-
- add_entry($bootloader->{entries},
- {
- type => 'other',
- kernel_or_dev => '/dev/fd0',
- label => 'floppy',
- unsafe => 1
- });
-}
-
-sub keytable {
- my ($f) = @_;
- $f or return;
-
- if ($f !~ /\.klt$/) {
- my $file = "/boot/$f.klt";
- run_program::rooted($::prefix, "keytab-lilo.pl", ">", $file, $f) or return;
- $f = $file;
- }
- -r "$::prefix/$f" && $f;
-}
-
-sub has_profiles { to_bool(get_label("office", $b)) }
-sub set_profiles {
- my ($b, $want_profiles) = @_;
-
- my $office = get_label("office", $b);
- if ($want_profiles xor $office) {
- my $e = get_label("linux", $b);
- if ($want_profiles) {
- push @{$b->{entries}}, { %$e, label => "office", append => "$e->{append} prof=Office" };
- $e->{append} .= " prof=Home";
- } else {
- # remove profiles
- $e->{append} =~ s/\s*prof=\w+//;
- @{$b->{entries}} = grep { $_ != $office } @{$b->{entries}};
- }
- }
-
-}
-
-sub get_of_dev {
- my ($unix_dev) = @_;
- #- don't care much for this - need to run ofpath rooted, and I need the result
- #- In test mode, just run on "/", otherwise you can't get to the /proc files
- run_program::rooted_or_die($::prefix, "/usr/local/sbin/ofpath $unix_dev", ">", "/tmp/ofpath");
- open(FILE, "$::prefix/tmp/ofpath") || die "Can't open $::prefix/tmp/ofpath";
- my $of_dev = "";
- local $_ = "";
- while (<FILE>){
- $of_dev = $_;
- }
- chop($of_dev);
- my @del_file = ($::prefix . "/tmp/ofpath");
- unlink (@del_file);
- log::l("OF Device: $of_dev");
- $of_dev;
-}
-
-sub install_yaboot {
- my ($lilo, $fstab, $hds) = @_;
- $lilo->{prompt} = $lilo->{timeout};
-
- if ($lilo->{message}) {
- local *F;
- open F, ">$::prefix/boot/message" and print F $lilo->{message} or $lilo->{message} = 0;
- }
- {
- local *F;
- local $\ = "\n";
- my $f = "$::prefix/etc/yaboot.conf";
- open F, ">$f" or die "cannot create yaboot config file: $f";
- log::l("writing yaboot config to $f");
-
- print F "#yaboot.conf - generated by DrakX";
- print F "init-message=\"\\n$lilo->{'init-message'}\\n\"" if $lilo->{'init-message'};
-
- if ($lilo->{boot}) {
- print F "boot=$lilo->{boot}";
- my $of_dev = get_of_dev($lilo->{boot});
- print F "ofboot=$of_dev";
- } else {
- die "no bootstrap partition defined."
- }
-
- $lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(delay timeout);
- print F "install=/usr/local/lib/yaboot/yaboot";
- print F "magicboot=/usr/local/lib/yaboot/ofboot";
- $lilo->{$_} and print F $_ foreach qw(enablecdboot enableofboot);
- $lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(defaultos default);
- #- print F "nonvram";
- my $boot = "/dev/" . $lilo->{useboot} if $lilo->{useboot};
-
- foreach (@{$lilo->{entries}}) {
-
- if ($_->{type} eq "image") {
- my $of_dev = '';
- if (($boot !~ /$_->{root}/) && $boot) {
- $of_dev = get_of_dev($boot);
- print F "$_->{type}=$of_dev," . substr($_->{kernel_or_dev}, 5);
- } else {
- $of_dev = get_of_dev($_->{root});
- print F "$_->{type}=$of_dev,$_->{kernel_or_dev}";
- }
- print F "\tlabel=", substr($_->{label}, 0, 15); #- lilo doesn't handle more than 15 char long labels
- print F "\troot=$_->{root}";
- if (($boot !~ /$_->{root}/) && $boot) {
- print F "\tinitrd=$of_dev," . substr($_->{initrd}, 5) if $_->{initrd};
- } else {
- print F "\tinitrd=$of_dev,$_->{initrd}" if $_->{initrd};
- }
- #- xfs module on PPC requires larger initrd - say 6MB?
- print F "\tinitrd-size=6144" if $lilo->{xfsroot};
- print F "\tappend=\" $_->{append}\"" if $_->{append};
- print F "\tread-write" if $_->{'read-write'};
- print F "\tread-only" if !$_->{'read-write'};
- } else {
- my $of_dev = get_of_dev($_->{kernel_or_dev});
- print F "$_->{label}=$of_dev";
- }
- }
- }
- log::l("Installing boot loader...");
- my $f = "$::prefix/tmp/of_boot_dev";
- my $of_dev = get_of_dev($lilo->{boot});
- output($f, "$of_dev\n");
- $::testing and return;
- if (defined $install_steps_interactive::new_bootstrap) {
- run_program::run("hformat", "$lilo->{boot}") or die "hformat failed";
- }
- run_program::rooted_or_die($::prefix, "/sbin/ybin", "2>", "/tmp/.error");
- unlink "$::prefix/tmp/.error";
-}
-
-sub install_silo {
- my ($silo, $fstab) = @_;
- my $boot = fsedit::get_root($fstab, 'boot')->{device};
- my ($wd, $num) = $boot =~ /^(.*\D)(\d*)$/;
-
- #- setup boot promvars for.
- require c;
- if ($boot =~ /^md/) {
- #- get all mbr devices according to /boot are listed,
- #- then join all zero based partition translated to prom with ';'.
- #- keep bootdev with the first of above.
- log::l("/boot is present on raid partition which is not currently supported for promvars");
- } else {
- if (!$silo->{use_partition}) {
- foreach (@$fstab) {
- if (!$_->{start} && $_->{device} =~ /$wd/) {
- $boot = $_->{device};
- log::l("found a zero based partition in $wd as $boot");
- last;
- }
- }
- }
- $silo->{bootalias} = c::disk2PromPath($boot);
- $silo->{bootdev} = $silo->{bootalias};
- log::l("preparing promvars for device=$boot");
- }
- c::hasAliases() or log::l("clearing promvars alias as non supported"), $silo->{bootalias} = '';
-
- if ($silo->{message}) {
- local *F;
- open F, ">$::prefix/boot/message" and print F $silo->{message} or $silo->{message} = 0;
- }
- {
- local *F;
- local $\ = "\n";
- my $f = "$::prefix/boot/silo.conf"; #- always write the silo.conf file in /boot ...
- symlinkf "../boot/silo.conf", "$::prefix/etc/silo.conf"; #- ... and make a symlink from /etc.
- open F, ">$f" or die "cannot create silo config file: $f";
- log::l("writing silo config to $f");
-
- $silo->{$_} and print F "$_=$silo->{$_}" foreach qw(partition root default append);
- $silo->{$_} and print F $_ foreach qw(restricted);
- print F "password=", $silo->{password} if $silo->{restricted} && $silo->{password}; #- also done by msec
- print F "timeout=", round(10 * $silo->{timeout}) if $silo->{timeout};
- print F "message=$silo->{boot}/message" if $silo->{message};
-
- foreach (@{$silo->{entries}}) { #-my ($v, $e) = each %{$silo->{entries}}) {
- my $type = "$_->{type}=$_->{kernel_or_dev}"; $type =~ s|/boot|$silo->{boot}|;
- print F $type;
- print F "\tlabel=$_->{label}";
-
- if ($_->{type} eq "image") {
- my $initrd = $_->{initrd}; $initrd =~ s|/boot|$silo->{boot}|;
- print F "\tpartition=$_->{partition}" if $_->{partition};
- print F "\troot=$_->{root}" if $_->{root};
- print F "\tinitrd=$initrd" if $_->{initrd};
- print F "\tappend=\"$1\"" if $_->{append} =~ /^\s*"?(.*?)"?\s*$/;
- print F "\tread-write" if $_->{'read-write'};
- print F "\tread-only" if !$_->{'read-write'};
- }
- }
- }
- log::l("Installing boot loader...");
- $::testing and return;
- run_program::rooted($::prefix, "silo", "2>", "/tmp/.error", $silo->{use_partition} ? ("-t") : ()) or
- run_program::rooted_or_die($::prefix, "silo", "2>", "/tmp/.error", "-p", "2", $silo->{use_partition} ? ("-t") : ());
- unlink "$::prefix/tmp/.error";
-
- #- try writing in the prom.
- log::l("setting promvars alias=$silo->{bootalias} bootdev=$silo->{bootdev}");
- require c;
- c::setPromVars($silo->{bootalias}, $silo->{bootdev});
-}
-
-sub make_label_lilo_compatible {
- my ($label) = @_;
- $label = substr($label, 0, 15); #- lilo doesn't handle more than 15 char long labels
- $label =~ s/\s/_/g; #- lilo doesn't like spaces
- $label;
-}
-
-sub write_lilo_conf {
- my ($lilo, $fstab, $hds) = @_;
- $lilo->{prompt} = $lilo->{timeout};
-
- delete $lilo->{linear} if $lilo->{lba32};
-
- my $file2fullname = sub {
- my ($file) = @_;
- if (arch() =~ /ia64/) {
- (my $part, $file) = fsedit::file2part($fstab, $file);
- my %hds = map_index { $_ => "hd$::i" } map { $_->{device} }
- sort { isFat($b) <=> isFat($a) || $a->{device} cmp $b->{device} } fsedit::get_fstab(@$hds);
- $hds->{$part->{device}} . ":" . $file;
- } else {
- $file
- }
- };
-
- my %bios2dev = map_index { $::i => $_ } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot});
- my %dev2bios = reverse %bios2dev;
-
- if (is_empty_hash_ref($lilo->{bios} ||= {})) {
- my $dev = $hds->[0]{device};
- if ($dev2bios{$dev}) {
- log::l("Since we're booting on $bios2dev{0}, make it bios=0x80, whereas $dev is now " . (0x80 + $dev2bios{$dev}));
- $lilo->{bios}{"/dev/$bios2dev{0}"} = '0x80';
- $lilo->{bios}{"/dev/$dev"} = sprintf("0x%x", 0x80 + $dev2bios{$dev});
- }
- foreach (0 .. 3) {
- my ($letter) = $bios2dev{$_} =~ /hd([^ac])/; #- at least hda and hdc are handled correctly :-/
- next if $lilo->{bios}{"/dev/$bios2dev{$_}"} || !$letter;
- next if
- $_ > 0 #- always print if first disk is hdb, hdd, hde...
- && $bios2dev{$_ - 1} eq "hd" . chr(ord($letter) - 1);
- #- no need to help lilo with hdb (resp. hdd, hdf...)
- log::l("Helping lilo: $bios2dev{$_} must be " . (0x80 + $_));
- $lilo->{bios}{"/dev/$bios2dev{$_}"} = sprintf("0x%x", 0x80 + $_);
- }
- }
-
- {
- local *F;
- local $\ = "\n";
- my $f = arch() =~ /ia64/ ? "$::prefix/boot/efi/elilo.conf" : "$::prefix/etc/lilo.conf";
-
- open F, ">$f" or die "cannot create lilo config file: $f";
- log::l("writing lilo config to $f");
-
- chmod 0600, $f if $lilo->{password};
-
- #- normalize: RESTRICTED is only valid if PASSWORD is set
- delete $lilo->{restricted} if !$lilo->{password};
-
- local $lilo->{default} = make_label_lilo_compatible($lilo->{default});
- $lilo->{$_} and print F "$_=$lilo->{$_}" foreach qw(boot map install vga default keytable);
- $lilo->{$_} and print F $_ foreach qw(linear lba32 compact prompt nowarn restricted);
- print F "append=\"$lilo->{append}\"" if $lilo->{append};
- print F "password=", $lilo->{password} if $lilo->{password}; #- also done by msec
- print F "timeout=", round(10 * $lilo->{timeout}) if $lilo->{timeout};
- print F "serial=", $1 if get_append($lilo, 'console') =~ /ttyS(.*)/;
-
- print F "message=/boot/message" if (arch() !~ /ia64/);
- print F "menu-scheme=wb:bw:wb:bw" if (arch() !~ /ia64/);
-
- print F "ignore-table" if grep { $_->{unsafe} && $_->{table} } @{$lilo->{entries}};
-
- while (my ($dev, $bios) = each %{$lilo->{bios}}) {
- print F "disk=$dev bios=$bios";
- }
-
- foreach (@{$lilo->{entries}}) {
- print F "$_->{type}=", $file2fullname->($_->{kernel_or_dev});
- print F "\tlabel=", make_label_lilo_compatible($_->{label});
-
- if ($_->{type} eq "image") {
- print F "\troot=$_->{root}" if $_->{root};
- print F "\tinitrd=", $file2fullname->($_->{initrd}) if $_->{initrd};
- print F "\tappend=\"$_->{append}\"" if $_->{append};
- print F "\tvga=$_->{vga}" if $_->{vga};
- print F "\tread-write" if $_->{'read-write'};
- print F "\tread-only" if !$_->{'read-write'};
- } else {
- print F "\ttable=$_->{table}" if $_->{table};
- print F "\tunsafe" if $_->{unsafe} && !$_->{table};
-
- if (my ($dev) = $_->{table} =~ m|/dev/(.*)|) {
- if ($dev2bios{$dev}) {
- #- boot off the nth drive, so reverse the BIOS maps
- my $nb = sprintf("0x%x", 0x80 + $dev2bios{$dev});
- $_->{mapdrive} ||= { '0x80' => $nb, $nb => '0x80' };
- }
- }
- while (my ($from, $to) = each %{$_->{mapdrive} || {}}) {
- print F "\tmap-drive=$from";
- print F "\t to=$to";
- }
- }
- }
- }
-}
-
-sub install_lilo {
- my ($lilo, $fstab, $hds) = @_;
-
- $lilo->{install} = 'text' if $lilo->{methods}{lilo} eq 'lilo-text';
- output("$::prefix/boot/message-text", $lilo->{message}) if $lilo->{message};
- symlinkf "message-" . ($lilo->{methods}{lilo} eq 'lilo-graphic' ? 'graphic' : 'text'), "$::prefix/boot/message";
-
- write_lilo_conf($lilo, $fstab, $hds);
-
- log::l("Installing boot loader...");
- $::testing and return;
- run_program::rooted_or_die($::prefix, "lilo", "2>", "/tmp/.error") if (arch() !~ /ia64/);
- unlink "$::prefix/tmp/.error";
-}
-
-sub dev2bios {
- my ($hds, $where) = @_;
- $where =~ s|/dev/||;
- my @dev = map { $_->{device} } @$hds;
- member($where, @dev) or ($where) = @dev; #- if not on mbr,
-
- s/h(d[e-g])/x$1/ foreach $where, @dev; #- emulates ultra66 as xd_
-
- my $start = substr($where, 0, 2);
-
- my $translate = sub {
- $_ eq $where ? "aaa" : #- if exact match, value it first
- /^$start(.*)/ ? "ad$1" : #- if same class (ide/scsi/ultra66), value it before other classes
- $_;
- };
- @dev = map { $_->[0] }
- sort { $a->[1] cmp $b->[1] }
- map { [ $_, &$translate ] } @dev;
-
- s/x(d.)/h$1/ foreach @dev; #- switch back;
-
- @dev;
-}
-
-sub dev2grub {
- my ($dev, $dev2bios) = @_;
- $dev =~ m|^(/dev/)?(...)(.*)$| or die "dev2grub (bad device $dev), caller is " . join(":", caller());
- my $grub = $dev2bios->{$2} or die "dev2grub ($2)";
- "($grub" . ($3 && "," . ($3 - 1)) . ")";
-}
-
-sub write_grub_config {
- my ($lilo, $fstab, $hds) = @_;
- my %dev2bios = (
- (map_index { $_ => "fd$::i" } detect_devices::floppies_dev()),
- (map_index { $_ => "hd$::i" } dev2bios($hds, $lilo->{first_hd_device} || $lilo->{boot})),
- );
-
- {
- my %bios2dev = reverse %dev2bios;
- output "$::prefix/boot/grub/device.map",
- join '', map { "($_) /dev/$bios2dev{$_}\n" } sort keys %bios2dev;
- }
- my $bootIsReiser = isThisFs("reiserfs", fsedit::get_root($fstab, 'boot'));
- my $file2grub = sub {
- my ($part, $file) = fsedit::file2part($fstab, $_[0], 'keep_simple_symlinks');
- dev2grub($part->{device}, \%dev2bios) . $file;
- };
- {
- local *F;
- local $\ = "\n";
- my $f = "$::prefix/boot/grub/menu.lst";
- open F, ">$f" or die "cannot create grub config file: $f";
- log::l("writing grub config to $f");
-
- $lilo->{$_} and print F "$_ $lilo->{$_}" foreach qw(timeout);
-
- print F "color black/cyan yellow/cyan";
- print F "i18n ", $file2grub->("/boot/grub/messages");
- print F "keytable ", $file2grub->($lilo->{keytable}) if $lilo->{keytable};
- print F "serial --unit=$1 --speed=$2\nterminal --timeout=" . ($lilo->{timeout} || 0) . " console serial" if get_append($lilo, 'console') =~ /ttyS(\d),(\d+)/;
-
- #- since we use notail in reiserfs, altconfigfile is broken :-(
- unless ($bootIsReiser) {
- print F "altconfigfile ", $file2grub->(my $once = "/boot/grub/menu.once");
- output "$::prefix$once", " " x 100;
- }
-
- map_index {
- print F "default $::i" if $_->{label} eq $lilo->{default};
- } @{$lilo->{entries}};
-
- foreach (@{$lilo->{entries}}) {
- print F "\ntitle $_->{label}";
-
- if ($_->{type} eq "image") {
- my $vga = $_->{vga} || $lilo->{vga};
- printf F "kernel %s root=%s %s%s%s\n",
- $file2grub->($_->{kernel_or_dev}),
- $_->{root} =~ /loop7/ ? "707" : $_->{root}, #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
- $_->{append},
- $_->{'read-write'} && " rw",
- $vga && $vga ne "normal" && " vga=$vga";
- print F "initrd ", $file2grub->($_->{initrd}) if $_->{initrd};
- } else {
- print F "root ", dev2grub($_->{kernel_or_dev}, \%dev2bios);
- if ($_->{kernel_or_dev} !~ /fd/) {
- #- boot off the second drive, so reverse the BIOS maps
- $_->{mapdrive} ||= { '0x80' => '0x81', '0x81' => '0x80' }
- if $_->{table} && ($lilo->{first_hd_device} || $lilo->{boot}) !~ /$_->{table}/;
-
- map_each { print F "map ($::b) ($::a)" } %{$_->{mapdrive} || {}};
-
- print F "makeactive";
- }
- print F "chainloader +1";
- }
- }
- }
- my $hd = fsedit::get_root($fstab, 'boot')->{rootDevice};
-
- my $dev = dev2grub($lilo->{first_hd_device} || $lilo->{boot}, \%dev2bios);
- my ($s1, $s2, $m) = map { $file2grub->("/boot/grub/$_") } qw(stage1 stage2 menu.lst);
- my $f = "/boot/grub/install.sh";
- output "$::prefix$f",
-"grub --device-map=/boot/grub/device.map --batch <<EOF
-install $s1 d $dev $s2 p $m
-quit
-EOF
-";
-
- output "$::prefix/boot/grub/messages", map { substr(translate($_) . "\n", 0, 78) } ( #- ensure the translated messages are not too big the hard way
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Welcome to GRUB the operating system chooser!"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Use the %c and %c keys for selecting which entry is highlighted."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("Press enter to boot the selected OS, \'e\' to edit the"),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("commands before booting, or \'c\' for a command-line."),
-#-PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#-PO: and keep them smaller than 79 chars long
-__("The highlighted entry will be booted automatically in %d seconds."),
-);
-
- my $e = "$::prefix/boot/.enough_space";
- output $e, 1; -s $e or die _("not enough room in /boot");
- unlink $e;
- $f;
-}
-
-sub install_grub {
- my ($lilo, $fstab, $hds) = @_;
-
- my $f = write_grub_config($lilo, $fstab, $hds);
-
- log::l("Installing boot loader...");
- $::testing and return;
- symlink "$::prefix/boot", "/boot";
- run_program::run_or_die("sh", $f);
- unlink "$::prefix/tmp/.error.grub", "/boot";
-}
-
-sub lnx4win_file {
- my $lilo = shift;
- map { local $_ = $_; s,/,\\,g; "$lilo->{boot_drive}:\\lnx4win$_" } @_;
-}
-
-sub loadlin_cmd {
- my ($lilo) = @_;
- my $e = get_label("linux", $lilo) || first(grep { $_->{type} eq "image" } @{$lilo->{entries}});
-
- cp_af("$::prefix$e->{kernel_or_dev}", "$::prefix/boot/vmlinuz") unless -e "$::prefix/boot/vmlinuz";
- cp_af("$::prefix$e->{initrd}", "$::prefix/boot/initrd.img") unless -e "$::prefix/boot/initrd.img";
-
- $e->{label}, sprintf"%s %s initrd=%s root=%s $e->{append}",
- lnx4win_file($lilo, "/loadlin.exe", "/boot/vmlinuz", "/boot/initrd.img"),
- $e->{root} =~ /loop7/ ? "0707" : $e->{root}; #- special to workaround bug in kernel (see #ifdef CONFIG_BLK_DEV_LOOP)
-}
-
-sub install_loadlin {
- my ($lilo, $fstab) = @_;
-
- my $boot;
- ($boot) = grep { $lilo->{boot} eq "/dev/$_->{device}" } @$fstab;
- ($boot) = grep { loopback::carryRootLoopback($_) } @$fstab unless $boot && $boot->{device_windobe};
- ($boot) = grep { isFat($_) } @$fstab unless $boot && $boot->{device_windobe};
- log::l("loadlin device is $boot->{device} (windobe $boot->{device_windobe})");
- $lilo->{boot_drive} = $boot->{device_windobe};
-
- my ($winpart) = grep { $_->{device_windobe} eq 'C' } @$fstab;
- log::l("winpart is $winpart->{device}");
- my $winhandle = any::inspect($winpart, $::prefix, 'rw');
- my $windrive = $winhandle->{dir};
- log::l("windrive is $windrive");
-
- my ($label, $cmd) = loadlin_cmd($lilo);
-
- #install_loadlin_config_sys($lilo, $windrive, $label, $cmd);
- #install_loadlin_desktop($lilo, $windrive);
-
- output "/initrd/loopfs/lnx4win/linux.bat", unix2dos(
-'@echo off
-echo Mandrake Linux
-smartdrv /C
-' . "$cmd\n");
-
-}
-
-sub install_loadlin_config_sys {
- my ($lilo, $windrive, $label, $cmd) = @_;
-
- my $config_sys = "$windrive/config.sys";
- local $_ = cat_($config_sys);
- output "$windrive/config.mdk", $_ if $_;
-
- my $timeout = $lilo->{timeout} || 1;
-
- $_ = "
-[Menu]
-menuitem=Windows
-menudefault=Windows,$timeout
-
-[Windows]
-" . $_ if !/^\Q[Menu]/m;
-
- #- remove existing entry
- s/^menuitem=$label\s*//mi;
- s/\n\[$label\].*?(\n\[|$)/$1/si;
-
- #- add entry
- s/(.*\nmenuitem=[^\n]*)/$1\nmenuitem=$label/s;
-
- $_ .= "
-[$label]
-shell=$cmd
-";
- output $config_sys, unix2dos($_);
-}
-
-sub install_loadlin_desktop {
- my ($lilo, $windrive) = @_;
- my $windir = lc(cat_("$windrive/msdos.sys") =~ /^WinDir=.:\\(\S+)/m ? $1 : "windows");
-
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
-#-PO: so you may need to put them in English or in a different language if MS-windows doesn't exist in your language
- foreach (__("Desktop"),
-#-PO: "Desktop" and "Start Menu" are the name of the directories found in c:\windows
- __("Start Menu")) {
- my $d = "$windrive/$windir/" . translate($_);
- -d $d or $d = "$windrive/$windir/$_";
- -d $d or log::l("can't find windows $d directory"), next;
- output "$d/Linux4Win.url", unix2dos(sprintf
-q([InternetShortcut]
-URL=file:\lnx4win\lnx4win.exe
-WorkingDirectory=%s
-IconFile=%s
-IconIndex=0
-), lnx4win_file($lilo, "/", "/lnx4win.ico"));
- }
-}
-
-
-sub install {
- my ($lilo, $fstab, $hds) = @_;
-
- if (my ($p) = grep { $lilo->{boot} =~ /\Q$_->{device}/ } @$fstab) {
- die _("You can't install the bootloader on a %s partition\n", partition_table::type2fs($p))
- if isThisFs('xfs', $p);
- }
- $lilo->{keytable} = keytable($lilo->{keytable});
-
- if (exists $lilo->{methods}{grub}) {
- #- when lilo is selected, we don't try to install grub.
- #- just create the config file in case it may be useful
- eval { write_grub_config($lilo, $fstab, $hds) };
- }
-
- my %l = grep_each { $::b } %{$lilo->{methods}};
- my @rcs = map {
- c::is_secure_file('/tmp/.error') or die "can't ensure a safe /tmp/.error";
- my $f = $bootloader::{"install_$_"} or die "unknown bootloader method $_";
- eval { $f->(@_) };
- $@;
- } reverse sort keys %l; #- reverse sort for having grub installed after lilo if both are there.
-
- return if grep { !$_ } @rcs; #- at least one worked?
- die first(map { $_ } @rcs);
-}
-
-1;