diff options
Diffstat (limited to 'perl-install/Xconfig/card.pm')
| -rw-r--r-- | perl-install/Xconfig/card.pm | 635 |
1 files changed, 0 insertions, 635 deletions
diff --git a/perl-install/Xconfig/card.pm b/perl-install/Xconfig/card.pm deleted file mode 100644 index 686957ddb..000000000 --- a/perl-install/Xconfig/card.pm +++ /dev/null @@ -1,635 +0,0 @@ -package Xconfig::card; # $Id$ - -use diagnostics; -use strict; - -use detect_devices; -use modules; -use common; -use log; - - -my %VideoRams = ( - 256 => N_("256 kB"), - 512 => N_("512 kB"), - 1024 => N_("1 MB"), - 2048 => N_("2 MB"), - 4096 => N_("4 MB"), - 8192 => N_("8 MB"), - 16384 => N_("16 MB"), - 32768 => N_("32 MB"), - 65536 => N_("64 MB or more"), -); - -my $lib = arch() =~ /x86_64/ ? "lib64" : "lib"; - -my @xfree4_Drivers = ((arch() =~ /^sparc/ ? qw(sunbw2 suncg14 suncg3 suncg6 sunffb sunleo suntcx) : - qw(apm ark chips cirrus cyrix glide i128 i740 i810 imstt - mga neomagic newport nv rendition r128 radeon vesa - s3 s3virge savage siliconmotion sis tdfx tga trident tseng vmware)), - qw(ati glint vga fbdev)); - -sub from_raw_X { - my ($raw_X) = @_; - - my $device = $raw_X->get_device or die "no card configured"; - - my $card = { - use_DRI_GLX => eval { any { /dri/ } $raw_X->get_modules }, - %$device, - }; - add_to_card__using_Cards($card, $card->{BoardName}); - $card; -} - -sub to_raw_X { - my ($card, $raw_X) = @_; - - my @cards = ($card, @{$card->{cards} || []}); - - foreach (@cards) { - #- Specific ATI fglrx driver default options - if ($_->{Driver} eq 'fglrx') { - # $default_ATI_fglrx_config need to be move in proprietary ? - $_->{raw_LINES} ||= default_ATI_fglrx_config(); - } - if (arch() =~ /ppc/ && ($_->{Driver} eq 'r128' || $_->{Driver} eq 'radeon')) { - $_->{UseFBDev} = 1; - } - } - - $raw_X->set_devices(@cards); - - $raw_X->get_ServerLayout->{Xinerama} = { commented => !$card->{Xinerama}, Option => 1 } - if defined $card->{Xinerama}; - - # cleanup previous special nvidia libglx - $raw_X->remove_load_module($_) foreach @{$card->{REMOVE_GLX} || []}; - - if ($card->{DRI_GLX_SPECIAL}) { - $raw_X->remove_load_module('glx'); # this doesn't duplicate the above glx line - # This loads the NVIDIA GLX extension module. - # IT IS IMPORTANT TO KEEP NAME AS FULL PATH TO libglx.so ELSE - # IT WILL LOAD XFree86 glx module and the server will crash. - $raw_X->add_load_module($card->{DRI_GLX_SPECIAL}); - } else { - $raw_X->set_load_module('glx', $card->{Driver} ne 'fbdev'); #- glx for everyone, except proprietary nvidia and fbdev - $raw_X->set_load_module('dri', $card->{use_DRI_GLX}); - } - - $raw_X->remove_Section('DRI'); - - $raw_X->remove_load_module('v4l') if $card->{use_DRI_GLX} && $card->{Driver} eq 'r128'; -} - -sub default_ATI_fglrx_config() { our $default_ATI_fglrx_config } - -sub probe() { -#-for Pixel tests -#- my @c = { driver => 'Card:Matrox Millennium G400 DualHead', description => 'Matrox|Millennium G400 Dual HeadCard' }; - my @c = detect_devices::matching_driver__regexp('^(Card|Server|Driver):'); - - my @cards = map { - my @l = $_->{description} =~ /(.*?)\|(.*)/; - my $card = { - description => $_->{description}, - VendorName => $l[0], BoardName => $l[1], - BusID => "PCI:$_->{pci_bus}:$_->{pci_device}:$_->{pci_function}", - }; - if ($_->{driver} =~ /Card:(.*)/) { $card->{BoardName} = $1; add_to_card__using_Cards($card, $1) } - elsif ($_->{driver} =~ /Driver:(.*)/) { $card->{Driver} = $1 } - else { internal_error() } - - $card; - } @c; - - if (@cards >= 2 && $cards[0]{card_name} eq $cards[1]{card_name} && $cards[0]{card_name} eq 'Intel 830') { - shift @cards; - } - #- take a default on sparc if nothing has been found. - if (arch() =~ /^sparc/ && !@cards) { - log::l("Using probe with /proc/fb as nothing has been found!"); - my $s = cat_("/proc/fb"); - @cards = { server => $s =~ /Mach64/ ? "Mach64" : $s =~ /Permedia2/ ? "3DLabs" : "Sun24" }; - } - - #- disabling MULTI_HEAD when not available - foreach (@cards) { - $_->{MULTI_HEAD} && $_->{card_name} =~ /G[24]00/ or next; - if ($ENV{MATROX_HAL}) { - $_->{need_MATROX_HAL} = 1; - } else { - delete $_->{MULTI_HEAD}; - } - } - - #- in case of only one cards, remove all BusID reference, this will avoid - #- need of change of it if the card is moved. - #- on many PPC machines, card is on-board, BusID is important, leave? - if (@cards == 1 && !$cards[0]{MULTI_HEAD} && arch() !~ /ppc/) { - delete $cards[0]{BusID}; - } - - @cards; -} - -sub card_config__not_listed { - my ($in, $card, $options) = @_; - - my $vendors_regexp = join '|', map { quotemeta } ( - '3Dlabs', - 'AOpen', 'ASUS', 'ATI', 'Ark Logic', 'Avance Logic', - 'Cardex', 'Chaintech', 'Chips & Technologies', 'Cirrus Logic', 'Compaq', 'Creative Labs', - 'Dell', 'Diamond', 'Digital', - 'ET', 'Elsa', - 'Genoa', 'Guillemot', 'Hercules', 'Intel', 'Leadtek', - 'Matrox', 'Miro', 'NVIDIA', 'NeoMagic', 'Number Nine', - 'Oak', 'Orchid', - 'RIVA', 'Rendition Verite', - 'S3', 'Silicon Motion', 'STB', 'SiS', 'Sun', - 'Toshiba', 'Trident', - 'VideoLogic', - ); - my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+"); - - my @xf4 = grep { $options->{allowFB} || $::isStandalone || $_ ne 'fbdev' } @xfree4_Drivers; - my @list = ( - (map { 'Vendor|' . $_ } keys %$cards), - (map { 'Xorg|' . $_ } @xf4), - ); - - my $r = exists $cards->{$card->{BoardName}} ? "Vendor|$card->{BoardName}" : 'Xorg|vesa'; - $in->ask_from_({ title => N("X server"), - messages => N("Choose an X server"), - interactive_help_id => 'configureX_card_list', - }, - [ { val => \$r, separator => '|', list => \@list, sort => 1, - format => sub { $_[0] =~ /^Vendor\|($vendors_regexp)\s*-?(.*)/ ? "Vendor|$1|$2" : - $_[0] =~ /^Vendor\|(.*)/ ? "Vendor|Other|$1" : $_[0] } } ]) or return; - - log::explanations("Xconfig::card: $r manually chosen"); - - $r eq "Vendor|$card->{BoardName}" and return 1; #- it is unchanged, do not modify $card - - my ($kind, $s) = $r =~ /(.*?)\|(.*)/; - - %$card = (); - if ($kind eq 'Vendor') { - add_to_card__using_Cards($card, $s); - } else { - $card->{Driver} = $s; - } - $card->{manually_chosen} = 1; - 1; -} - -sub multi_head_choose { - my ($in, $auto, @cards) = @_; - - my @choices = multi_head_choices('', @cards); - - my $tc = $choices[0]; - if ($auto) { - @choices == 1 or return; - } else { - $tc = $in->ask_from_listf(N("Multi-head configuration"), - N("Your system supports multiple head configuration. -What do you want to do?"), sub { $_[0]{text} }, \@choices) or return; - } - $tc->{code} or die internal_error(); - return $tc->{code}(); -} - -sub configure_auto_install { - my ($raw_X, $do_pkgs, $old_X, $options) = @_; - - my $card = $old_X->{card} || {}; - - if ($card->{card_name}) { - #- try to get info from given card_name - add_to_card__using_Cards($card, $card->{card_name}); - if (!$card->{Driver}) { - log::l("bad card_name $card->{card_name}, using probe"); - undef $card->{card_name}; - } - } - - if (!$card->{Driver}) { - my @cards = probe(); - my ($choice) = multi_head_choices($old_X->{Xinerama}, @cards); - $card = $choice ? $choice->{code}() : do { - log::explanations('no graphic card probed, try providing one using $o->{card}{Driver} or $o->{card}{card_name}. Defaulting...'); - { Driver => $options->{allowFB} ? 'fbdev' : 'vesa' }; - }; - } - - my ($glx_choice) = xfree_and_glx_choices($card); - log::explanations("Using $glx_choice->{text}"); - $glx_choice->{code}(); - set_glx_restrictions($card); - - install_server($card, $options, $do_pkgs); - if ($card->{needVideoRam} && !$card->{VideoRam}) { - $card->{VideoRam} = $options->{VideoRam_probed} || 4096; - log::explanations("argh, I need to know VideoRam! Taking " . ($options->{probed_VideoRam} ? "the probed" : "a default") . " value: VideoRam = $card->{VideoRam}"); - } - to_raw_X($card, $raw_X); - $card; -} - -sub configure { - my ($in, $raw_X, $do_pkgs, $auto, $options) = @_; - - my @cards = probe(); - @cards or @cards = {}; - - if (!$cards[0]{Driver}) { - if ($options->{allowFB}) { - $cards[0]{Driver} = 'fbdev'; - } elsif ($auto) { - log::explanations("Xconfig::card: auto failed (unknown card and no allowFB)"); - return 0; - } - } - if (!$auto) { - card_config__not_listed: - card_config__not_listed($in, $cards[0], $options) or return; - } - - my $card = multi_head_choose($in, $auto, @cards) or return; - - xfree_and_glx_choose($in, $card, $auto) or return; - - eval { install_server($card, $options, $do_pkgs) }; - if ($@) { - $in->ask_warn('', N("Can not install Xorg package: %s", $@)); - goto card_config__not_listed; - } - - if ($card->{needVideoRam} && !$card->{VideoRam}) { - if ($auto) { - log::explanations("Xconfig::card: auto failed (needVideoRam)"); - return; - } - $card->{VideoRam} = (find { $_ <= $options->{VideoRam_probed} } reverse ikeys %VideoRams) || 4096; - $in->ask_from('', N("Select the memory size of your graphics card"), - [ { val => \$card->{VideoRam}, - type => 'list', - list => [ ikeys %VideoRams ], - format => sub { translate($VideoRams{$_[0]}) }, - not_edit => !$::expert } ]) or return; - } - - to_raw_X($card, $raw_X); - $card; -} - -sub install_server { - my ($card, $options, $do_pkgs) = @_; - - my $prog = "$::prefix/usr/X11R6/bin/Xorg"; - - my @packages; - push @packages, 'xorg-x11-server' if ! -x $prog; - - #- additional packages to install according available card. - #- add XFree86-libs-DRI here if using DRI (future split of XFree86 TODO) - if ($card->{use_DRI_GLX}) { - push @packages, 'Glide_V5' if $card->{card_name} eq 'Voodoo5 (generic)'; - push @packages, 'Glide_V3-DRI' if member($card->{card_name}, 'Voodoo3 (generic)', 'Voodoo Banshee (generic)'); - push @packages, 'xorg-x11-glide-module' if $card->{card_name} =~ /Voodoo/; - } - - if ($options->{freedriver}) { - delete $card->{Driver2}; - } - - my %nvidia_packages = ( - #- using NVIDIA Legacy driver for old NVIDIA cards (TNT, TNT2, Vanta, Quadro, Quadro2, GeForce and GeForce2): - legacy => [ qw(nvidia_legacy-kernel nvidia_legacy) ], - #- using current NVIDIA driver for recent NVIDIA cards (Geforce/Quadro 3/4/FX/6x00/NVS): - new => [ qw(nvidia-kernel nvidia) ], - ); - - my %proprietary_Driver2 = ( - nvidia => $nvidia_packages{ $card->{NVIDIA_LEGACY} ? 'legacy' : 'new' }, - fglrx => [ 'ati-kernel', 'ati' ], #- using ATI fglrx driver (Radeon, Fire GL cards only). - ); - if (my $rpms_needed = $proprietary_Driver2{$card->{Driver2}}) { - if (my $proprietary_packages = $do_pkgs->check_kernel_module_packages($rpms_needed->[0], $rpms_needed->[1])) { - push @packages, @$proprietary_packages; - # prevent having both nvidia & nvidia_legacy driver installed due to incompatibility: - if ($card->{Driver2} eq 'nvidia') { - $do_pkgs->remove($_) foreach @{$do_pkgs->check_kernel_module_packages(@{$nvidia_packages{ $card->{NVIDIA_LEGACY} ? 'new' : 'legacy' }})}; - } - } - } - - $do_pkgs->install(@packages) if @packages; - -x $prog or die "server not available (should be in $prog)"; - - my $modules_dir = "/usr/X11R6/$lib/modules"; - my $new_nvidia_libglx = "$modules_dir/extensions/nvidia/libglx.so"; - my $old_nvidia_libglx = "$modules_dir/extensions/libglx.so"; - #- make sure everything is correct at this point, packages have really been installed - #- and driver and GLX extension is present. - if ($card->{Driver2} eq 'nvidia' && - (-e "$::prefix$modules_dir/drivers/nvidia_drv.o" || -e "$::prefix$modules_dir/drivers/nvidia_drv.so")) { - #- when there is extensions/libglx.a, it means extensions/libglx.so is not xorg's libglx, so it may be nvidia's - #- new nvidia packages have libglx.so in extensions/nvidia instead of simply extensions/ - my $libglx_a = -e "$::prefix$modules_dir/extensions/libglx.a"; - my $libglx = find { -l "$::prefix$_" } $new_nvidia_libglx, if_($libglx_a, $old_nvidia_libglx); - if ($libglx) { - log::explanations("Using specific NVIDIA driver and GLX extensions"); - $card->{Driver} = 'nvidia'; - $card->{DRI_GLX_SPECIAL} = $libglx; - } - } - if ($card->{Driver2} eq 'fglrx' && - -e "$::prefix$modules_dir/dri/fglrx_dri.so" && - (-e "$::prefix$modules_dir/drivers/fglrx_drv.o" || -e "$::prefix$modules_dir/drivers/fglrx_drv.so")) { - log::explanations("Using specific ATI fglrx and DRI drivers"); - $card->{Driver} = 'fglrx'; - } - $card->{REMOVE_GLX} = [ $old_nvidia_libglx, $new_nvidia_libglx ]; - - libgl_config($card); - - if ($card->{need_MATROX_HAL}) { - require Xconfig::proprietary; - Xconfig::proprietary::install_matrox_hal($::prefix); - } -} - -sub xfree_and_glx_choose { - my ($in, $card, $auto) = @_; - - my @choices = xfree_and_glx_choices($card); - - my $tc = - $auto ? $choices[0] : - $in->ask_from_listf_raw({ title => N("Xorg configuration"), - messages => formatAlaTeX(join("\n\n\n", (grep { $_ } map { $_->{more_messages} } @choices), - N("Which configuration of Xorg do you want to have?"))), - interactive_help_id => 'configureX_xfree_and_glx', - }, - sub { $_[0]{text} }, \@choices) or return; - log::explanations("Using $tc->{text}"); - $tc->{code}(); - set_glx_restrictions($card); - 1; -} - -sub multi_head_choices { - my ($want_Xinerama, @cards) = @_; - my @choices; - - my $has_multi_head = @cards > 1 || @cards && $cards[0]{MULTI_HEAD} > 1; - my $disable_multi_head = any { - $_->{Driver} or log::explanations("found card $_->{description} not supported by XF4, disabling multi-head support"); - !$_->{Driver}; - } @cards; - - if ($has_multi_head && !$disable_multi_head) { - my $configure_multi_head = sub { - - #- special case for multi head card using only one BusID. - @cards = map { - map_index { { Screen => $::i, %$_ } } ($_) x ($_->{MULTI_HEAD} || 1); - } @cards; - - my $card = shift @cards; #- assume good default. - $card->{cards} = \@cards; - $card->{Xinerama} = $_[0]; - $card; - }; - my $independent = { text => N("Configure all heads independently"), code => sub { $configure_multi_head->('') } }; - my $xinerama = { text => N("Use Xinerama extension"), code => sub { $configure_multi_head->(1) } }; - push @choices, $want_Xinerama ? ($xinerama, $independent) : ($independent, $xinerama); - } - - foreach my $c (@cards) { - push @choices, { text => N("Configure only card \"%s\"%s", $c->{description}, $c->{BusID} && " ($c->{BusID})"), - code => sub { $c } }; - } - @choices; -} - -#- Xorg version available, it would be better to parse available package and get version from it. -sub xorg_version() { '6.9' } - -sub xfree_and_glx_choices { - my ($card) = @_; - - my @choices = if_($card->{Driver}, { text => N("Xorg %s", xorg_version()), code => sub {} }); - - #- no GLX with Xinerama - return @choices if $card->{Xinerama}; - - #- ask the expert or any user on second pass user to enable or not hardware acceleration support. - if ($card->{DRI_GLX}) { - unshift @choices, { text => N("Xorg %s with 3D hardware acceleration", xorg_version()), - code => sub { $card->{use_DRI_GLX} = 1 }, - more_messages => N("Your card can have 3D hardware acceleration support with Xorg %s.", xorg_version()), - }; - } - - #- an expert user may want to try to use an EXPERIMENTAL 3D acceleration. - if ($card->{DRI_GLX_EXPERIMENTAL} && $::expert) { - push @choices, { text => N("Xorg %s with EXPERIMENTAL 3D hardware acceleration", xorg_version()), - code => sub { $card->{use_DRI_GLX} = 1 }, - more_messages => N("Your card can have 3D hardware acceleration support with Xorg %s, -NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.", xorg_version()), - }; - } - @choices; -} - -sub set_glx_restrictions { - my ($card) = @_; - - #- 3D acceleration configuration for XFree 4 using DRI, this is enabled by default - #- but for some there is a need to specify VideoRam (else it will not run). - if ($card->{use_DRI_GLX}) { - $card->{needVideoRam} = 1 if $card->{description} =~ /Matrox.* G[245][05]0/; - ($card->{needVideoRam}, $card->{VideoRam}) = (1, 16384) - if member($card->{card_name}, 'Intel 810', 'Intel 815'); - - #- hack for ATI Rage 128 card using a bttv or peripheral with PCI bus mastering exchange - #- AND using DRI at the same time. - if (member($card->{card_name}, 'ATI Rage 128', 'ATI Rage 128 TVout', 'ATI Rage 128 Mobility')) { - $card->{Options}{UseCCEFor2D} = bool2text(modules::probe_category('multimedia/tv')); - } - } - - #- check for Matrox G200 PCI cards, disable AGP in such cases, causes black screen else. - if (member($card->{card_name}, 'Matrox Millennium 200', 'Matrox Millennium 200', 'Matrox Mystique') && $card->{description} !~ /AGP/) { - log::explanations("disabling AGP mode for Matrox card, as it seems to be a PCI card"); - log::explanations("this is only used for XFree 3.3.6, see /etc/X11/glx.conf"); - substInFile { s/^\s*#*\s*mga_dma\s*=\s*\d+\s*$/mga_dma = 0\n/ } "$::prefix/etc/X11/glx.conf"; - } -} - -sub libgl_config { - my ($card) = @_; - - my $dir = "$::prefix/etc/ld.so.conf.d"; - my $comment = '# commented-by-DrakX '; - - my %driver_to_libgl_config = ( - nvidia => $card->{NVIDIA_LEGACY} ? 'nvidia_legacy.conf' : 'nvidia.conf', - nvidia_other => !$card->{NVIDIA_LEGACY} ? 'nvidia_legacy.conf' : 'nvidia.conf', - fglrx => 'ati.conf', - ); - my $need_to_run_ldconfig; - my $wanted = $driver_to_libgl_config{$card->{Driver}}; - foreach my $file (values %driver_to_libgl_config) { - substInFile { - my ($commented, $s) = /^(\Q$comment\E)?(.*)/; - if ($file eq $wanted) { - $_ = "$s\n"; - $need_to_run_ldconfig ||= $commented; - } else { - $_ = "$comment$s\n"; - $need_to_run_ldconfig ||= !$commented; - } - } "$dir/$file" if -e "$dir/$file"; - } - if ($::isStandalone && $need_to_run_ldconfig) { - log::explanations("ldconfig will be run because the GL library was " . ($wanted ? 'enabled' : 'disabled')); - system("/sbin/ldconfig"); - } -} - -sub add_to_card__using_Cards { - my ($card, $name) = @_; - my $cards = readCardsDB("$ENV{SHARE_PATH}/ldetect-lst/Cards+"); - add2hash($card, $cards->{$name}); - $card->{BoardName} = $card->{card_name}; - - $card; -} - -#- needed for bad cards not restoring cleanly framebuffer, according to which version of Xorg are used. -sub check_bad_card { - my ($card) = @_; - my $bad_card = $card->{BAD_FB_RESTORE}; - $bad_card ||= $card->{Driver} eq 'i810' || $card->{Driver} eq 'fbdev'; - $bad_card ||= member($card->{Driver}, 'nvidia', 'vmware') if !$::isStandalone; #- avoid testing during install at any price. - - log::explanations("the graphics card does not like X in framebuffer") if $bad_card; - - !$bad_card; -} - -sub readCardsDB { - my ($file) = @_; - my ($card, %cards); - - my $F = openFileMaybeCompressed($file); - - my $lineno = 0; - my ($cmd, $val); - my $fs = { - NAME => sub { - $cards{$card->{card_name}} = $card if $card; - $card = { card_name => $val }; - }, - SEE => sub { - my $c = $cards{$val} or die "Error in database, invalid reference $val at line $lineno"; - add2hash($card, $c); - }, - LINE => sub { $val =~ s/^\s*//; $card->{raw_LINES} .= "$val\n" }, - CHIPSET => sub { $card->{Chipset} = $val }, - DRIVER => sub { $card->{Driver} = $val }, - DRIVER2 => sub { $card->{Driver2} = $val }, - NEEDVIDEORAM => sub { $card->{needVideoRam} = 1 }, - DRI_GLX => sub { $card->{DRI_GLX} = 1 if $card->{Driver} }, - DRI_GLX_EXPERIMENTAL => sub { $card->{DRI_GLX_EXPERIMENTAL} = 1 if $card->{Driver} }, - MULTI_HEAD => sub { $card->{MULTI_HEAD} = $val if $card->{Driver} }, - BAD_FB_RESTORE => sub { $card->{BAD_FB_RESTORE} = 1 }, - FB_TVOUT => sub { $card->{FB_TVOUT} = 1 }, - UNSUPPORTED => sub { delete $card->{Driver} }, - NVIDIA_LEGACY => sub { $card->{NVIDIA_LEGACY} = 1 }, - - COMMENT => sub {}, - }; - - local $_; - while (<$F>) { $lineno++; - s/\s+$//; - /^#/ and next; - /^$/ and next; - /^END/ and do { $cards{$card->{card_name}} = $card if $card; last }; - - ($cmd, $val) = /(\S+)\s*(.*)/ or next; - - my $f = $fs->{$cmd}; - - $f ? $f->() : log::l("unknown line $lineno ($_)"); - } - \%cards; -} - -our $default_ATI_fglrx_config = <<'END'; -# === disable PnP Monitor === -#Option "NoDDC" -# === disable/enable XAA/DRI === -Option "no_accel" "no" -Option "no_dri" "no" -# === FireGL DDX driver module specific settings === -# === Screen Management === -Option "DesktopSetup" "0x00000000" -Option "MonitorLayout" "AUTO, AUTO" -Option "IgnoreEDID" "off" -Option "HSync2" "unspecified" -Option "VRefresh2" "unspecified" -Option "ScreenOverlap" "0" -# === TV-out Management === -Option "NoTV" "yes" -Option "TVStandard" "NTSC-M" -Option "TVHSizeAdj" "0" -Option "TVVSizeAdj" "0" -Option "TVHPosAdj" "0" -Option "TVVPosAdj" "0" -Option "TVHStartAdj" "0" -Option "TVColorAdj" "0" -Option "GammaCorrectionI" "0x00000000" -Option "GammaCorrectionII" "0x00000000" -# === OpenGL specific profiles/settings === -Option "Capabilities" "0x00000000" -# === Video Overlay for the Xv extension === -Option "VideoOverlay" "on" -# === OpenGL Overlay === -# Note: When OpenGL Overlay is enabled, Video Overlay -# will be disabled automatically -Option "OpenGLOverlay" "off" -Option "CenterMode" "off" -# === QBS Support === -Option "Stereo" "off" -Option "StereoSyncEnable" "1" -# === Misc Options === -Option "UseFastTLS" "0" -Option "BlockSignalsOnLock" "on" -Option "UseInternalAGPGART" "no" -Option "ForceGenericCPU" "no" -# === FSAA === -Option "FSAAScale" "1" -Option "FSAADisableGamma" "no" -Option "FSAACustomizeMSPos" "no" -Option "FSAAMSPosX0" "0.000000" -Option "FSAAMSPosY0" "0.000000" -Option "FSAAMSPosX1" "0.000000" -Option "FSAAMSPosY1" "0.000000" -Option "FSAAMSPosX2" "0.000000" -Option "FSAAMSPosY2" "0.000000" -Option "FSAAMSPosX3" "0.000000" -Option "FSAAMSPosY3" "0.000000" -Option "FSAAMSPosX4" "0.000000" -Option "FSAAMSPosY4" "0.000000" -Option "FSAAMSPosX5" "0.000000" -Option "FSAAMSPosY5" "0.000000" -END - -1; - |