summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--mdk-stage1/pcmcia/pcmcia_probe.c396
1 files changed, 0 insertions, 396 deletions
diff --git a/mdk-stage1/pcmcia/pcmcia_probe.c b/mdk-stage1/pcmcia/pcmcia_probe.c
deleted file mode 100644
index 57651d75f..000000000
--- a/mdk-stage1/pcmcia/pcmcia_probe.c
+++ /dev/null
@@ -1,396 +0,0 @@
-/*
- * Guillaume Cottenceau (gc@mandrakesoft.com)
- *
- * Copyright 2000 MandrakeSoft
- *
- * This software may be freely redistributed under the terms of the GNU
- * public license.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- */
-
-/* Code comes from /anonymous@projects.sourceforge.net:/pub/pcmcia-cs/pcmcia-cs-3.1.23.tar.bz2
- *
- * Licence of this code follows:
-
- PCMCIA controller probe
-
- probe.c 1.52 2000/06/12 21:33:02
-
- The contents of this file are subject to the Mozilla Public
- License Version 1.1 (the "License"); you may not use this file
- except in compliance with the License. You may obtain a copy of
- the License at http://www.mozilla.org/MPL/
-
- Software distributed under the License is distributed on an "AS
- IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
- implied. See the License for the specific language governing
- rights and limitations under the License.
-
- The initial developer of the original code is David A. Hinds
- <dahinds@users.sourceforge.net>. Portions created by David A. Hinds
- are Copyright (C) 1999 David A. Hinds. All Rights Reserved.
-
- Alternatively, the contents of this file may be used under the
- terms of the GNU Public License version 2 (the "GPL"), in which
- case the provisions of the GPL are applicable instead of the
- above. If you wish to allow the use of your version of this file
- only under the terms of the GPL and not to allow others to use
- your version of this file under the MPL, indicate your decision
- by deleting the provisions above and replace them with the notice
- and other provisions required by the GPL. If you do not delete
- the provisions above, a recipient may use your version of this
- file under either the MPL or the GPL.
-
-======================================================================*/
-
-#include <sys/types.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <unistd.h>
-#include <string.h>
-#include <errno.h>
-#include <fcntl.h>
-
-#include <pcmcia/config.h>
-
-#include "../log.h"
-#include "pcmcia.h"
-
-/*====================================================================*/
-
-typedef struct {
- u_short vendor, device;
- char *tag;
- char *name;
-} pci_id_t;
-
-pci_id_t pci_id[] = {
- { 0x1013, 0x1100, "Cirrus Logic CL 6729", "Cirrus PD6729" },
- { 0x1013, 0x1110, "Cirrus Logic PD 6832", "Cirrus PD6832" },
- { 0x10b3, 0xb106, "SMC 34C90", "SMC 34C90" },
- { 0x1180, 0x0465, "Ricoh RL5C465", "Ricoh RL5C465" },
- { 0x1180, 0x0466, "Ricoh RL5C466", "Ricoh RL5C466" },
- { 0x1180, 0x0475, "Ricoh RL5C475", "Ricoh RL5C475" },
- { 0x1180, 0x0476, "Ricoh RL5C476", "Ricoh RL5C476" },
- { 0x1180, 0x0478, "Ricoh RL5C478", "Ricoh RL5C478" },
- { 0x104c, 0xac12, "Texas Instruments PCI1130", "TI 1130" },
- { 0x104c, 0xac13, "Texas Instruments PCI1031", "TI 1031" },
- { 0x104c, 0xac15, "Texas Instruments PCI1131", "TI 1131" },
- { 0x104c, 0xac16, "Texas Instruments PCI1250", "TI 1250A" },
- { 0x104c, 0xac17, "Texas Instruments PCI1220", "TI 1220" },
- { 0x104c, 0xac19, "Texas Instruments PCI1221", "TI 1221" },
- { 0x104c, 0xac1a, "Texas Instruments PCI1210", "TI 1210" },
- { 0x104c, 0xac1d, "Texas Instruments PCI1251A", "TI 1251A" },
- { 0x104c, 0xac1f, "Texas Instruments PCI1251B", "TI 1251B" },
- { 0x104c, 0xac1b, "Texas Instruments PCI1450", "TI 1450" },
- { 0x104c, 0xac1c, "Texas Instruments PCI1225", "TI 1225" },
- { 0x104c, 0xac1e, "Texas Instruments PCI1211", "TI 1211" },
- { 0x104c, 0xac50, "Texas Instruments PCI1410", "TI 1410" },
- { 0x104c, 0xac51, "Texas Instruments PCI1420", "TI 1420" },
- { 0x1217, 0x6729, "O2 Micro 6729", "O2Micro OZ6729" },
- { 0x1217, 0x673a, "O2 Micro 6730", "O2Micro OZ6730" },
- { 0x1217, 0x6832, "O2 Micro 6832/6833", "O2Micro OZ6832/OZ6833" },
- { 0x1217, 0x6836, "O2 Micro 6836/6860", "O2Micro OZ6836/OZ6860" },
- { 0x1217, 0x6872, "O2 Micro 6812", "O2Micro OZ6812" },
- { 0x1179, 0x0603, "Toshiba ToPIC95-A", "Toshiba ToPIC95-A" },
- { 0x1179, 0x060a, "Toshiba ToPIC95-B", "Toshiba ToPIC95-B" },
- { 0x1179, 0x060f, "Toshiba ToPIC97", "Toshiba ToPIC97" },
- { 0x1179, 0x0617, "Toshiba ToPIC100", "Toshiba ToPIC100" },
- { 0x119b, 0x1221, "Omega Micro 82C092G", "Omega Micro 82C092G" },
- { 0x8086, 0x1221, "Intel 82092AA", "Intel 82092AA" }
-};
-#define PCI_COUNT (sizeof(pci_id)/sizeof(pci_id_t))
-
-static int pci_probe(void)
-{
- char s[256], *name = NULL;
- u_int device, vendor, i;
- FILE *f;
-
- log_message("PCMCIA: probing PCI bus..");
-
- f = fopen("/proc/bus/pci/devices", "r");
-
- if (!f) {
- log_message("where are you going without /proc/bus/pci/devices ??");
- return -1;
- }
-
- while (fgets(s, 256, f) != NULL) {
- u_int n = strtoul(s+5, NULL, 16);
- vendor = (n >> 16); device = (n & 0xffff);
- for (i = 0; i < PCI_COUNT; i++)
- if ((vendor == pci_id[i].vendor) &&
- (device == pci_id[i].device)) break;
- if (i < PCI_COUNT) {
- name = pci_id[i].name;
- break;
- }
- }
-
- fclose(f);
-
- if (name) {
- log_message("\t%s found, 2 sockets.", name);
- return 0;
- } else {
- log_message("\tnot found.");
- return -ENODEV;
- }
-}
-
-/*====================================================================*/
-
-#include <sys/io.h>
-typedef u_short ioaddr_t;
-
-#include "i82365.h"
-#include "cirrus.h"
-#include "vg468.h"
-
-static ioaddr_t i365_base = 0x03e0;
-
-static u_char i365_get(u_short sock, u_short reg)
-{
- u_char val = I365_REG(sock, reg);
- outb(val, i365_base); val = inb(i365_base+1);
- return val;
-}
-
-static void i365_set(u_short sock, u_short reg, u_char data)
-{
- u_char val = I365_REG(sock, reg);
- outb(val, i365_base); outb(data, i365_base+1);
-}
-
-static void i365_bset(u_short sock, u_short reg, u_char mask)
-{
- u_char d = i365_get(sock, reg);
- d |= mask;
- i365_set(sock, reg, d);
-}
-
-static void i365_bclr(u_short sock, u_short reg, u_char mask)
-{
- u_char d = i365_get(sock, reg);
- d &= ~mask;
- i365_set(sock, reg, d);
-}
-
-static int i365_probe(void)
-{
- int val, sock, done;
- char *name = "i82365sl";
-
- log_message("PCMCIA: probing for Intel PCIC (ISA)..");
-
- sock = done = 0;
- ioperm(i365_base, 4, 1);
- ioperm(0x80, 1, 1);
- for (; sock < 2; sock++) {
- val = i365_get(sock, I365_IDENT);
- switch (val) {
- case 0x82:
- name = "i82365sl A step";
- break;
- case 0x83:
- name = "i82365sl B step";
- break;
- case 0x84:
- name = "VLSI 82C146";
- break;
- case 0x88: case 0x89: case 0x8a:
- name = "IBM Clone";
- break;
- case 0x8b: case 0x8c:
- break;
- default:
- done = 1;
- }
- if (done) break;
- }
-
- if (sock == 0) {
- log_message("\tnot found.");
- return -ENODEV;
- }
-
- if ((sock == 2) && (strcmp(name, "VLSI 82C146") == 0))
- name = "i82365sl DF";
-
- /* Check for Vadem chips */
- outb(0x0e, i365_base);
- outb(0x37, i365_base);
- i365_bset(0, VG468_MISC, VG468_MISC_VADEMREV);
- val = i365_get(0, I365_IDENT);
- if (val & I365_IDENT_VADEM) {
- if ((val & 7) < 4)
- name = "Vadem VG-468";
- else
- name = "Vadem VG-469";
- i365_bclr(0, VG468_MISC, VG468_MISC_VADEMREV);
- }
-
- /* Check for Cirrus CL-PD67xx chips */
- i365_set(0, PD67_CHIP_INFO, 0);
- val = i365_get(0, PD67_CHIP_INFO);
- if ((val & PD67_INFO_CHIP_ID) == PD67_INFO_CHIP_ID) {
- val = i365_get(0, PD67_CHIP_INFO);
- if ((val & PD67_INFO_CHIP_ID) == 0) {
- if (val & PD67_INFO_SLOTS)
- name = "Cirrus CL-PD672x";
- else {
- name = "Cirrus CL-PD6710";
- sock = 1;
- }
- i365_set(0, PD67_EXT_INDEX, 0xe5);
- if (i365_get(0, PD67_EXT_INDEX) != 0xe5)
- name = "VIA VT83C469";
- }
- }
-
- log_message("\t%s found, %d sockets.", name, sock);
- return 0;
-
-} /* i365_probe */
-
-
-/*====================================================================*/
-
-#include "tcic.h"
-
-static u_char tcic_getb(ioaddr_t base, u_char reg)
-{
- u_char val = inb(base+reg);
- return val;
-}
-
-static void tcic_setb(ioaddr_t base, u_char reg, u_char data)
-{
- outb(data, base+reg);
-}
-
-static u_short tcic_getw(ioaddr_t base, u_char reg)
-{
- u_short val = inw(base+reg);
- return val;
-}
-
-static void tcic_setw(ioaddr_t base, u_char reg, u_short data)
-{
- outw(data, base+reg);
-}
-
-static u_short tcic_aux_getw(ioaddr_t base, u_short reg)
-{
- u_char mode = (tcic_getb(base, TCIC_MODE) & TCIC_MODE_PGMMASK) | reg;
- tcic_setb(base, TCIC_MODE, mode);
- return tcic_getw(base, TCIC_AUX);
-}
-
-static void tcic_aux_setw(ioaddr_t base, u_short reg, u_short data)
-{
- u_char mode = (tcic_getb(base, TCIC_MODE) & TCIC_MODE_PGMMASK) | reg;
- tcic_setb(base, TCIC_MODE, mode);
- tcic_setw(base, TCIC_AUX, data);
-}
-
-static int get_tcic_id(ioaddr_t base)
-{
- u_short id;
- tcic_aux_setw(base, TCIC_AUX_TEST, TCIC_TEST_DIAG);
- id = tcic_aux_getw(base, TCIC_AUX_ILOCK);
- id = (id & TCIC_ILOCKTEST_ID_MASK) >> TCIC_ILOCKTEST_ID_SH;
- tcic_aux_setw(base, TCIC_AUX_TEST, 0);
- return id;
-}
-
-static int tcic_probe_at(ioaddr_t base)
-{
- int i;
- u_short old;
-
- /* Anything there?? */
- for (i = 0; i < 0x10; i += 2)
- if (tcic_getw(base, i) == 0xffff)
- return -1;
-
- log_message("\tat %#3.3x: ", base);
-
- /* Try to reset the chip */
- tcic_setw(base, TCIC_SCTRL, TCIC_SCTRL_RESET);
- tcic_setw(base, TCIC_SCTRL, 0);
-
- /* Can we set the addr register? */
- old = tcic_getw(base, TCIC_ADDR);
- tcic_setw(base, TCIC_ADDR, 0);
- if (tcic_getw(base, TCIC_ADDR) != 0) {
- tcic_setw(base, TCIC_ADDR, old);
- return -2;
- }
-
- tcic_setw(base, TCIC_ADDR, 0xc3a5);
- if (tcic_getw(base, TCIC_ADDR) != 0xc3a5)
- return -3;
-
- return 2;
-}
-
-static int tcic_probe(void)
-{
- int sock, id;
-
- log_message("PCMCIA: probing for Databook TCIC-2 (ISA)..");
-
- ioperm(TCIC_BASE, 16, 1);
- ioperm(0x80, 1, 1);
- sock = tcic_probe_at(TCIC_BASE);
-
- if (sock <= 0) {
- log_message("\tnot found.");
- return -ENODEV;
- }
-
- id = get_tcic_id(TCIC_BASE);
- switch (id) {
- case TCIC_ID_DB86082:
- log_message("DB86082"); break;
- case TCIC_ID_DB86082A:
- log_message("DB86082A"); break;
- case TCIC_ID_DB86084:
- log_message("DB86084"); break;
- case TCIC_ID_DB86084A:
- log_message("DB86084A"); break;
- case TCIC_ID_DB86072:
- log_message("DB86072"); break;
- case TCIC_ID_DB86184:
- log_message("DB86184"); break;
- case TCIC_ID_DB86082B:
- log_message("DB86082B"); break;
- default:
- log_message("Unknown TCIC-2 ID 0x%02x", id);
- }
- log_message("\tfound at %#6x, %d sockets.\n", TCIC_BASE, sock);
-
- return 0;
-
-} /* tcic_probe */
-
-
-/*====================================================================*/
-
-char * pcmcia_probe(void)
-{
- if (!pci_probe())
- return "i82365";
- else if (!i365_probe())
- return "i82365";
- else if (!tcic_probe())
- return "tcic";
- else
- return NULL;
-}