remove file already in cluster/mdkc2 cvs branch

1 files changed, 0 insertions, 595 deletions

diff --git a/rescue/tree/ka/install.sh b/rescue/tree/ka/install.sh
deleted file mode 100755
index efc8169b8..000000000
--- a/rescue/tree/ka/install.sh
+++ /dev/null
@@ -1,595 +0,0 @@
-#!/bin/bash
-
-# this script is run by at startup on the nfs_root system, and runs the ka-deploy client 
-# it also updates the 'step file' on the tftp server
-
-# $Revision$
-# $Author$
-# $Date$
-# $Header$
-# $Id$
-# $Log$
-# Revision 1.2  2004/04/02 14:03:41  aginies
-# first relsease
-#
-# Revision 1.6  2001/12/03 16:28:02  sderr
-# Completely new install script
-#
-# Revision 1.5  2001/10/10 13:55:04  sderr
-# Updates in documentation
-#
-# Revision 1.4  2001/06/29 09:31:45  sderr
-# *** empty log message ***
-#
-# Revision 1.3  2001/05/31 08:51:43  sderr
-# scripts/doc update to match new command-line syntax
-#
-# Revision 1.2  2001/05/03 12:34:41  sderr
-# Added CVS Keywords to most files. Mostly useless.
-#
-# $State$
-
-# This script is provided as an exmaple and should probably not be run as is
-
-
-unset LANG
-unset LANGUAGE
-
-# needed for some for i in foo* loops
-shopt -s nullglob
-
-bash < /dev/tty2 >/dev/tty2 2>&1 &
-
-# IDEA : maybe this option could be overriden by a kaopt= in the kernel command line ?
-KA_SESSION_BASE="-s kainstall"
-
-ka_call_num=0
-
-inc_ka_session()
-{
-	(( ka_call_num++ ))
-	cur_ka_session=$KA_SESSION_BASE$ka_call_num
-}
-
-
-# testing ? -- NOT FULLY IMPLEMENTED !!!!!!!!!!!!!!!!!!!!
-#DONTWRITE=yes
-DONTWRITE=no
-
-# Let's find out what our IP is
-ip=`/sbin/ifconfig | grep -v 127.0.0.1 | grep "inet addr" | sed 's/^.*inet addr:\([^ ]*\) .*$/\1/g' | head -n 1`
-
-# the file tftpserver should contain the name of the .. tftpserver
-server=`cat tftpserver`
-
-
-# reverse a file
-tac()
-{
-	awk '{ x[NR] = $0 } END { for (i = NR; i >= 1; i--) print x[i] }'
-}
-
-# run a command, hide its output and print OK if it suceeds, print FAILED and show the output otherwise.
-runcom()
-{
-		echo -n "$1..." 1>&2
-		shift;
-		out=`"$@" 2>&1` 
-		ret=$?
-		if [ $ret -eq 0 ]; then
-				echo $C_S"OK"$C_N 1>&2
-		else
-				echo $C_F"Failed"$C_N 1>&2
-				echo $C_W"$out"$C_N 1>&2
-		fi
-		return $ret
-
-}
-
-# 5 4 3 2 1 zero ignition
-countdown()
-{
-        t=$1
-        while [ "$t" -ne 0 ]; do
-                echo -n "$t "
-                sleep 1
-		# move the cursor back
-		# I use now tr instead of sed because busybox's sed adds a non-wanted carriage return
-		# busybox's tr does not seem to know about the [: :] stuff (?)
-                echo -n "$t " | tr " 0-9" $'\x08'
-		(( t-- ))
-        done
-	# backspace only moves the cursor back, so at this point there's still a "1" to erase
-	if [ "$1" -ne 0 ] ;then
-        	echo -n "  "$'\x08\x08'
-	fi
-}
-
-
-int_shell()
-{
-	echo $C_H"starting an interactive shell"$C_N
-	exec /bin/bash
-}
-
-fail()
-{
-		echo $*
-		echo $C_F"--- The installation program FAILED ---"$C_N
-		echo "Check your configuration -- try to read previous error messages"
-		echo "This machine is going to reboot (Ctrl-S to block it) (Ctrl-C for an interactive shell)"
-		trap int_shell SIGINT
-		countdown 30
-		do_reboot
-}
-
-do_reboot()
-{
-		reboot
-		sleep 1234567 # do not continue the install script (/sbin/reboot does not block)
-}
-
-
-	
-# ahem this LILO function should be fixed someday
-# right now this function assumes there is a properly configured lilo on the duplicated linux system
-do_lilo()
-{		
-
-	
-chroot /disk << EOF
-lilo
-EOF
-
-
-}		
-
-
-run_chroot_command()
-{		
-
-	chroot /disk $*
-
-}		
-
-
-log()
-{
-	echo $* 1>&2
-	echo $* >> /tmp/ginstlog
-}
-
-# version for the standard tftp client
-std_tftp_put_file()
-{
-	remotef=$2
-	localf=$1
-	err=`echo put $localf $remotef | tftp $server 2>&1`
-	err=`echo $err | grep Sent`
-	if [ -z "$err" ]; then
-		log tftp error: could not get/put file 
-		return 1
-	fi
-	return 0
-}
-
-# version for the tftp client built in busybox
-busybox_tftp_put_file()
-{
-	remotef=$2
-	localf=$1
-	err=`tftp -p -l $localf -r $remotef $server 2>&1`
-	if [ $? -ne 0 ]; then
-		log tftp error: could not get/put file $err
-		return 1
-	fi
-	return 0
-}
-
-
-busybox_tftp_get_file()
-{
-	remotef=$1
-	localf=$2
-	err=`tftp -g -l $localf -r $remotef $server 2>&1`
-	if [ $? -ne 0 ]; then
-		log tftp error: could not get/put file $err
-		return 1
-	fi
-	return 0
-}
-
-
-std_tftp_get_file()
-{
-	remotef=$1
-	localf=$2
-	err=`echo get $remotef $localf | tftp $server 2>&1`
-	err=`echo $err | grep Received`
-	if [ -z "$err" ]; then
-		echo tftp error: could not get/put file 
-		return 1
-	fi
-	return 0
-}
-
-tftp_get_file()
-{
-		busybox_tftp_get_file "$@"
-}
-
-tftp_put_file()
-{
-		busybox_tftp_put_file "$@"
-}
-
-# write a string ($2) in a remote file ($1)
-tftp_put_in()
-{
-	echo "$2" > $temp
-	err=`echo put $temp "$1" | tftp $server 2>&1`
-	rm -f $temp
-	err=`echo $err | grep Sent`
-	if [ -z "$err" ]; then
-		log tftp error: could not get/put file 
-		return 1
-	fi
-	return 0
-}
-
-get_var_bis()
-{
-		while read a; do
-			echo "$a" | grep -s -q "^ *#.*"
-			if [ $? -eq 0 ]; then 
-					continue 
-			fi
-			val=`echo "$a" | sed 's/[^"]*"\(.*[^\\]\)".*/\1/'`
-			var=`echo "$a" | sed 's/[^"]*".*[^\\]" *\$\([^ ]*\)/\1/'`
-			if [ "$var" = "$1" ]; then
-					echo $val
-					return 0
-			fi
-		done
-		return 1
-}
-
-# fetch variable $2 from file $1
-get_var()
-{
-		(cat $1; echo) | get_var_bis $2
-}
-
-# find the current step in the kernel command line
-get_step()
-{
-	step=install
-#	step=`cat /proc/cmdline | sed 's/.*kastep=\([^ ]*\).*/\1/'`
-	if [ "$step" ]; then
-		echo $step > /tmp/step
-		return 0
-	fi
-	return 1
-}
-
-
-# write a new file on the tftp server
-# this file is a pxelinux config file
-# do this by getting the 'template file' and adding a DEFAULT at the beginning
-set_step()
-{
-	step=$1
-	
-	
-	runcom "Getting template file" tftp_get_file "ka/pxelinux.cfg/template" /tmp/template || return 1
-	
-	echo DEFAULT $step > /tmp/newcfg
-	cat /tmp/template >> /tmp/newcfg
-	
-	runcom "Sending back new pxelinux config file" tftp_put_file /tmp/newcfg "ka/pxelinux.cfg/IP/$ip" || return 1
-	
-	return 0
-}
-
-
-
-# the mount_partition calls must be done in the same shell (NOT a subshell) because the global variable below has to be updated
-# idea : maybe use a file instead of this variable (and since the tac function now exists, why not ?)
-mounted_fs=""
-
-# mount a partition UNDER /disk !!! (/disk is prepended to $2)
-mount_partition()
-{
-	dev=$1
-	point=$2
-	
-	echo -n "Mounting $C_H$1$C_N as /disk$C_H$point$C_N" 
-	mkdir -p /disk$point
-	test -d /disk$point || return 1
-	runcom "..." mount $dev /disk/$point || return 1
-	mounted_fs="$dev $mounted_fs"
-	return 0
-}
-
-# umount all mounted partitions under /disk, in the reverse order
-umount_partitions()
-{
-	for dev in $mounted_fs; do
-		retries=0
-		while ! runcom "Umounting $dev" umount $dev ; do
-			sleep 3
-			(( retries++ ))
-			if [ $retries -gt 3 ]; then
-				echo Failed too many times. giving up.
-				break
-			fi
-		done
-	done
-}
-
-
-# recreate excluded directories
-# read stdin like this : u=rwx g=rwx o=rwx uid gid filename
-recreate_dirs()
-{
-	while read line; do
-		declare -a fields
-		fields=( $line )
-		file=/disk/${fields[5]}
-#		echo $file
-# note : it is possible that the directory exists already, if it was a mount point
-# we need to set the permissions/users anyway
-		mkdir -p $file
-#		echo chmod ${fields[0]},${fields[1]},${fields[2]}  $file
-		chmod ${fields[0]},${fields[1]},${fields[2]}  $file
-		# argl !! chmod o+t does not work with busybox's chmod !
-		# we have to handle it alone
-		if echo ${fields[2]} | grep -q t; then
-			chmod +t $file
-		fi
-		chown ${fields[3]}.${fields[4]} $file
-	done
-}
-
-make_partitions()
-{
-	# we must be in the partfiles directory
-	for file in partition_tab*; do
-		drive=`echo $file | sed 's/partition_tab//'`
-		cat $file | runcom "Writing partition table for $drive using sfdisk" /sbin/sfdisk /dev/$drive -uS --force || fail "error with sfdisk"
-	done
-
-	for file in fdisk_commands*; do
-		drive=`echo $file | sed 's/fdisk_commands//'`
-		cat $file | runcom "Writing partition table for $drive using fdisk" fdisk /dev/$drive || fail "error with fdisk"
-	done
-
-}
-checkDevEntries()
-{ 
-	if ! test -r /disk/dev/hda ; then
-  		(cd /dev && tar c *) | (cd /disk/dev && tar x)
-	fi
-}
-
-write_MBRs()
-{
-# we must be in the partfiles directory also
-	for file in MBR*; do
-		drive=`echo $file | sed 's/MBR//'`
-		runcom "Writing new MBR for $drive" dd if=$file of=/dev/$drive bs=1 count=446
-	done
-}
-
-
-# Colors
-# Success
-C_S=$'\033[1;32m'
-# Failure
-C_F=$'\033[1;31m'
-# Warning
-C_W=$'\033[1;33m'
-# Normal
-C_N=$'\033[0;39m'
-# Hilight
-C_H=$'\033[1;39m'
-
-
-# Clear screen, fancy startup message.
-echo $'\033'[2J$'\033'[H
-echo "------| $C_H"Ka"$C_N |---- Install starting..."
-
-temp=/tmp/ginst
-
-# activate dma ? -- obsolete stuff I think		
-# runcom "Setting HD optimizations" hdparm -c1 -d1 -K1 $HD	
-		
-delay=0
-
-if ! runcom "Getting step name" get_step; then
-		echo "Error: Could not get current step "
-		fail
-else
-		step=`cat /tmp/step`
-fi
-
-echo Next Server is `cat /ka/tftpserver`
-
-echo Current step for $ip is : \"$C_H$step$C_N\"
-
-echo -n "Finding install type :  "
-case $step in
-	shell)
-		echo No install, but interactive shell
-		## drop the user to an interactive shell 
-		exec /bin/bash
-		;;
-	install) 
-		install_type=install
-		nextstep=ready
-		echo Install Linux
-		;;
-	test_install) 
-		install_type=test_install
-		nextstep=ready
-		echo TEST TEST TEST
-		countdown 10
-		echo Install Linux TEST
-		;;
-esac
-
-
-if [ -z "$install_type" ]; then
-		echo FATAL : Could not recognize this step name
-		echo "Aborting... "
-		fail
-fi
-
-
-
-# receive the partition table, fstab, etc from the source node
-mkdir /tmp/partfiles
-inc_ka_session
-echo Current session is $cur_ka_session
-runcom "Receiving partitions information" /ka/ka-d-client -w $cur_ka_session -e "( cd /tmp/partfiles && tar xvf - )"	|| fail
-
-
-
-
-cd /tmp/partfiles 
-make_partitions
-
-
-test -f /tmp/partfiles/streams || fail "Missing streams file"
-first_stream=`cat /tmp/partfiles/streams | head -n 1`
-
-if [ "$first_stream" = linux ]; then
-	rcv_linux=yes
-else
-	rcv_linux=no
-fi
-
-
-
-#if we must receive a linux system, we need to format and mount the partitions
-if [ $rcv_linux = yes ]; then	
-	# format partitions
-	format_partitions()
-	{
-		while read line; do
-			declare -a fields
-			fields=( $line )
-
-			case ${fields[2]} in
-				
-				ext3 )
-					runcom "Formatting ${fields[0]} as ext3" mke2fs -j ${fields[0]} || fail
-					;;
-				ext2 )
-					runcom "Formatting ${fields[0]} as ext2" mke2fs ${fields[0]} || fail
-					;;
-				swap ) 
-					runcom "Formatting ${fields[0]} as swap" mkswap ${fields[0]} || fail
-					;;
-			esac
-		done
-	}
-
-	format_partitions < /tmp/partfiles/pfstab	
-		
-
-	# mount the partitions
-
-	mount_partitions()
-	{
-		while read line; do
-			declare -a fields
-			fields=( $line )
-
-			case ${fields[2]} in
-				ext3 )
-					insmod /modules/jbd.o
-					insmod /modules/ext3.o
-					mount_partition ${fields[0]} ${fields[1]} || fail
-					;;
-				ext2 )
-					mount_partition ${fields[0]} ${fields[1]} || fail
-					;;
-			esac
-		done
-	}
-
-	# NOTE
-	# I replaced cat truc | mount_partitions by mount_partitions < truc
-	# because in the former case mount_partitions runs in a subshell and the $mounted_fs value is lost
-	mount_partitions < /tmp/partfiles/pfstab
-
-	echo ++++++++++++++++++++++++++
-	mount
-	echo ++++++++++++++++++++++++++
-
-	delay=0
-else
-	delay=10
-fi
-
-if [ $DONTWRITE != yes ]; then
-	for stream in `cat /tmp/partfiles/streams`; do
-		if [ "$stream" = "linux" ]; then
-			# partitions already formatted/mounted, just copy now
-			# untar data from the master 'on the fly'
-			echo -n "Linux copy is about to start "
-			countdown $delay
-			echo
-			inc_ka_session
-			/ka/ka-d-client -w $cur_ka_session -e "(cd /disk; tar --extract  --read-full-records --same-permissions --numeric-owner --sparse --file - )" || fail
-			echo Linux copy done.
-			echo Creating excluded directories
-			cat /tmp/partfiles/excluded | recreate_dirs
-			echo Setting up networking
-			/ka/setup_network.sh
-			delay=10
-		else
-			# maybe receive some raw partition dumps
-			echo Raw copy of $stream is about to start
-			countdown $delay
-			inc_ka_session
-			/ka/ka-d-client -w $cur_ka_session -e "dd of=$stream bs=65536" || fail
-			delay=10
-		fi
-	done
-
-	cd /tmp/partfiles
-	write_MBRs
-
-	
-	if test -f /tmp/partfiles/command; then
-		checkDevEntries
-		command_to_run=`cat /tmp/partfiles/command`
-		runcom "Running $command_to_run" run_chroot_command "$command_to_run"
-	fi
-
-else
-	echo " I would run ka-deploy(s) and then lilo/mbr  "
-	sleep 1
-fi
-
-
-runcom "Syncing disks" sync 
-
-umount_partitions
-
-# maybe there is a last dummy ka-deploy for synchronization
-if test -f /tmp/partfiles/delay; then
-	sleep 1
-	inc_ka_session
-	runcom "Waiting source node signal to end installation"	/ka/ka-d-client -w $cur_ka_session -e "cat" || fail
-fi
-
-	
-# Update the step file on the tftp server
-#runcom 'Sending back new $step' set_step $nextstep || fail
-
-echo -n Rebooting...
-countdown 3
-do_reboot