kill "used by only one" harddrake::ui module,

move its content to standalone/harddrake2

3 files changed, 281 insertions, 310 deletions

diff --git a/perl-install/harddrake/data.pm b/perl-install/harddrake/data.pm
index 610db6426..04589fdba 100644
--- a/perl-install/harddrake/data.pm
+++ b/perl-install/harddrake/data.pm
@@ -6,7 +6,7 @@ use common;
 
 our @ISA = qw(Exporter);
 our @EXPORT_OK = qw(version tree);
-our ($version, $sbindir, $bindir) = ("1.1.8", "/usr/sbin", "/usr/bin");
+our ($version, $sbindir, $bindir) = ("9.0.1", "/usr/sbin", "/usr/bin");
 
 my @devices = detect_devices::probeall(1);
 
diff --git a/perl-install/harddrake/ui.pm b/perl-install/harddrake/ui.pm
deleted file mode 100644
index da89bf111..000000000
--- a/perl-install/harddrake/ui.pm
+++ /dev/null
@@ -1,307 +0,0 @@
-package harddrake::ui;
-
-use strict;
-use diagnostics;
-
-require harddrake::data;
-use common;
-use ugtk2 qw(:create :helpers :wrappers);
-use interactive;
-
-
-# { field => [ short_translation, full_description] }
-my %fields = 
-    (
-     "alternative_drivers" => [ N("Alternative drivers"),
-                                N("the list of alternative drivers for this sound card") ],
-     "bus" => 
-     [ N("Bus"), 
-       N("this is the physical bus on which the device is plugged (eg: PCI, USB, ...)") ],
-     "channel" => [N("Channel"), N("EIDE/SCSI channel")],
-	 "bogomips" => [N("Bogomips"), N("The GNU/Linux kernel needs to do run a calculation loop at boot time
-	 to initialize a timer counter.  Its result is stored as bogomips as a way to \"benchmark\" the cpu.")],
-     "bus_id" => 
-     [ N("Bus identification"), 
-       N("- PCI and USB devices: this list the vendor, device, subvendor and subdevice PCI/USB ids") ],
-     "bus_location" => 
-     [ N("Location on the bus"), 
-       N("- pci devices: this gives the PCI slot, device and function of this card
-- eide devices: the device is either a slave or a master device
-- scsi devices: the scsi bus and the scsi device ids") ],
-     "cache size" => [ N("Cache size"), N("Size of the (second level) cpu cache") ],
-     "coma_bug" => [ N("Coma bug:"), N("Does this cpu has Cyrix 6x86 Coma bug ?") ],
-     "cpu family" => [ N("Cpuid family"), N("Family of the cpu (eg: 6 for i686 class)") ],
-     "cpuid level" => [ N("Cpuid level"), N("Information level that one can obtain through the cpuid instruction") ],
-     "cpu MHz" => [ N("Frequency (MHz)"), N("The cpu frequency in Mhz (Mega herz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)") ],
-     "description" => [ N("Description"), N("This field describe the device") ],
-     "device" => [ N("Old device file"),
-                   N("old static device name used in dev package") ],
-     "devfs_device" => [ N("New devfs device"),  
-                         N("new dinamic device name generated by incore kernel devfs") ],
-     "driver" => [ N("Module"), N("the module of the GNU/Linux kernel that handle that device") ],
-     "flags" => [ N("Flags"), N("CPU flags reported by the kernel") ],
-     "fdiv_bug" => [ N("Fdiv bug"), 
-                     N("Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the attended precision when performing a Floating point DIVision (FDIV)") ],
-
-
-     "fpu" => [ N("Is FPU present"), N("yes means the processor has an arithmetic coprocessor") ],
-     "fpu_exception" => [ N("Does FPU have an irq vector"), N("yes means the arithmetic coprocessor has an exception vector attached") ],
-     "f00f_bug" => [N("F00f bug"), N("Early pentium were buggy and freezed when decoding the F00F bytecode")],
-     "hlt_bug" => [ N("Halt bug"), 
-                    N("Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used") ],
-
-     "info" => [N("Floppy format"), N("Format of floppies the drive accept")],
-     "level" => [N("Level"), N("Sub generation of the cpu")],
-     "media_type" => [ N("Media class"), N("class of hardware device") ],
-     "Model" => [N("Model"), N("hard disk model")],
-     "model" => [N("Model"), N("Generation of the cpu (eg: 8 for PentiumIII, ...)")],
-     "model name" => [N("Model name"), N("Official vendor name of the cpu")],
-     "nbuttons" => [ N("Number of buttons"), "the number of buttons the mouse have" ],
-     "name" => [ N("Name"), "the name of the cpu" ],
-     "port" => [N("Port"), N("network printer port")],
-     "processor" => [ N("Processor ID"), N("the number of the processor") ],
-     "stepping" => [ N("Model stepping"), N("Stepping of the cpu (sub model (generation) number)") ],
-     "type" => [ N("Type"), N("The type of bus on which the mouse is connected") ],
-     "Vendor" => [ N("Vendor"), N("the vendor name of the device") ],
-     "vendor_id" => [ N("Vendor"), N("the vendor name of the processor") ]
-     );
-
-
-my ($in, %IDs, $pid, $w);
-
-my (%options, %check_boxes);
-my $conffile = "/etc/sysconfig/harddrake2/ui.conf";
-
-my ($modem_check_box, $printer_check_box, $current_device, $current_configurator);
-
-my @menu_items = 
-    (
-     {   path => N("/_File"), type => '<Branch>' },
-     {   path => N("/_File").N("/_Quit"), accelerator => N("<control>Q"), callback => \&quit_global    },
-     {   path => N("/_Options").N("/Autodetect _printers"), type => '<CheckItem>',
-         callback => sub { $options{PRINTERS_DETECTION} = $check_boxes{PRINTERS_DETECTION}->active } },
-     {   path => N("/_Options").N("/Autodetect _modems"), type => '<CheckItem>',
-         callback => sub { $options{MODEMS_DETECTION} = $check_boxes{MODEMS_DETECTION}->active } },
-     {   path => N("/_Help"), type => '<Branch>' },
-     {
-         path => N("/_Help").N("/_Help..."), 
-         callback => sub {
-             if ($current_device) {
-                 $in->ask_warn(N("Harddrake help"), 
-                               N("Description of the fields:\n\n")
-                               . join("\n\n", map { if_($fields{$_}[0], "$fields{$_}[0]: $fields{$_}[1]") } sort keys %$current_device))
-                 } else {
-                     $in->ask_warn(N("Select a device !"), N("Once you've selected a device, you'll be able to see explanations on fields displayed on the right frame (\"Information\")"))
-                 }
-             }
-     },
-     {   path => N("/_Help").N("/_Report Bug"),
-         callback => sub { unless (fork()) { exec("drakbug --report harddrake2 &") } } },
-     {   path => N("/_Help").N("/_About..."), 
-         callback => sub {
-             $in->ask_warn(N("About Harddrake"), 
-                           join("", N("This is HardDrake, a Mandrake hardware configuration tool.\nVersion:"), " $harddrake::data::version\n", 
-                                 N("Author:"), " Thierry Vignaud <tvignaud\@mandrakesoft.com> \n\n",
-                                 formatAlaTeX($::license)));
-         }
-     }
-     );
-
-# fill the devices tree
-sub detect {
-    my @class_tree;
-    foreach (@harddrake::data::tree) {
-        my ($Ident, $title, $icon, $configurator, $detector) = @$_;
-        next if ref($detector) ne "CODE"; #skip class witouth detector
-        next if $Ident =~ /(MODEM|PRINTER)/ && $::testing;
-        next if $Ident =~ /MODEM/ && !$options{MODEMS_DETECTION};
-        next if $Ident =~ /PRINTER/ && !$options{PRINTERS_DETECTION};
-#    print N("Probing %s class\n", $Ident);
-#    standalone::explanations("Probing %s class\n", $Ident);
-
-        my @devices = &$detector;
-        next if !listlength(@devices); # Skip empty class (no devices)
-        my $devices_list;
-        foreach (@devices) {
-            $_->{custom_id} = harddrake::data::custom_id($_, $title);
-            if (exists $_->{bus} && $_->{bus} eq "PCI") {
-                my $i = $_;
-                $_->{bus_id} = join ':', map { if_($i->{$_} ne "65535",  sprintf("%lx", $i->{$_})) } qw(vendor id subvendor subid);
-                $_->{bus_location} = join ':', map { sprintf("%lx", $i->{$_}) } qw(pci_bus pci_device pci_function);
-            }
-	    # we really should test for $title there:
-            # split description into manufacturer/description
-            ($_->{Vendor}, $_->{description}) = split(/\|/, $_->{description}) if exists $_->{description};
-
-            if (exists $_->{val}) { # Scanner ?
-                my $val = $_->{val};
-                ($_->{Vendor}, $_->{description}) = split(/\|/, $val->{DESCRIPTION});
-            }
-            # EIDE detection incoherency:
-            if (exists $_->{bus} && $_->{bus} eq 'ide') {
-                $_->{channel} = $_->{channel} ? N("secondary") : N("primary");
-                delete $_->{info};
-            } elsif ((exists $_->{id}) && $_->{bus} !~ /USB|PCI/) {
-                # SCSI detection incoherency:
-                my $i = $_;
-                $_->{bus_location} = join ':', map { sprintf("%lx", $i->{$_}) } qw(bus id);
-            }
-            if ($Ident eq "AUDIO") {
-                require harddrake::sound;
-                my $alter = harddrake::sound::get_alternative($_->{driver});
-                $_->{alternative_drivers} = join(':', @$alter) if $alter->[0] ne 'unknown';
-            }
-            foreach my $i (qw(vendor id subvendor subid pci_bus pci_device pci_function MOUSETYPE XMOUSETYPE unsafe val devfs_prefix wacom auxmouse)) { delete $_->{$i} };
-            $_->{device} = '/dev/'.$_->{device} if exists $_->{device};
-            push @$devices_list, $_;
-        }
-        push @class_tree, [ $devices_list, $title, $icon, $configurator ];
-    }
-    @class_tree;
-}
-
-sub new {
-    my ($sig_id, $wait);
-    $in = 'interactive'->vnew('su', 'default');
-    $wait = $in->wait_message(N("Please wait"), N("Detection in progress"));
-    gtkflush();
-    %options = getVarsFromSh($conffile);
-    my @class_tree = &detect;
-
-    # Build the gui
-    add_icon_path('/usr/share/pixmaps/harddrake2/');
-    $w = ugtk2->new(N("Harddrake2 version ") . $harddrake::data::version);
-    $w->{window}->set_size_request(760, 550) unless $::isEmbedded;
-    my ($menubar, $factory) = create_factory_menu($w->{rwindow}, @menu_items);
-    my $tree_model = Gtk2::TreeStore->new(Gtk2::GType->OBJECT, Gtk2::GType->STRING);
-    my $statusbar;
-    $w->{window}->add(gtkpack_(0, Gtk2::VBox->new(0, 0),
-                               if_(!$::isEmbedded, 0, $menubar),
-                               1, create_hpaned(gtkadd(new Gtk2::Frame(N("Detected hardware")), 
-                                                       create_scrolled_window(my $tree = Gtk2::TreeView->new_with_model($tree_model))),
-                                                gtkpack_(0, Gtk2::VBox->new(0, 0),
-                                                         1, gtkadd(gtkset_size_request(new Gtk2::Frame(N("Information")), 300, 450),
-                                                                   create_scrolled_window(my $text = Gtk2::TextView->new)), 
-                                                         0, my $module_cfg_button = gtksignal_connect(new Gtk2::Button(N("Configure module")),
-                                                                                                      clicked => sub {
-                                                                                                        require modules::interactive;
-                                                                                                        modules::interactive::config_window($in, $current_device);
-                                                                                                        gtkset_mousecursor_normal();
-                                                                                                      }),
-                                                         0, my $config_button = gtksignal_connect(new Gtk2::Button(N("Run config tool")),
-                                                                                                  # we've a configurator, let's add a button for it and show it
-                                                                                                  clicked => sub {
-                                                                                                    return 1 if defined $pid;
-                                                                                                    if ($pid = fork()) {
-                                                                                                      $sig_id = $statusbar->push($statusbar->get_context_id("id"),
-                                                                                                                                 N("Running \"%s\" ...", $current_configurator));
-                                                                                                    } else {
-                                                                                                      exec($current_configurator) or die "$current_configurator missing\n";
-                                                                                                    }
-                                                                                                  })
-                                                        ),
-                                                'resize2' => 1
-                                               ),
-                               0, $statusbar = new Gtk2::Statusbar,
-                               if_($::isEmbedded, 0, gtksignal_connect(my $but = new Gtk2::Button(N("Quit")),
-                                                                       'clicked' => \&quit_global))
-                              )
-                      );
-
-    my $color = gtkcolor(0x3100, 0x6400, 0xbc00);
-    my $wcolor = gtkcolor(0xFFFF, 0x6400, 0x6400);
-#    $tree->set_column_auto_resize(0, 1);
-    my (%data, %configurators);
-    gtktext_append($text, [ [ N_("Click on a device in the left tree in order to get its information displayed here.") ] ]);
-    $tree->append_column(my $pixcolumn  = Gtk2::TreeViewColumn->new_with_attributes(undef, Gtk2::CellRendererPixbuf->new, 'pixbuf' => 0));
-    $tree->append_column(my $textcolumn = Gtk2::TreeViewColumn->new_with_attributes(undef, Gtk2::CellRendererText->new, 'text' => 1));
-#    $textcolumn->set_min_width(350);
-    $tree->set_headers_visible(0);
-    my $select_count;
-    my $selection = gtksignal_connect($tree->get_selection(), 'changed' => sub {
-					my ($select) = @_;
-					# gtk+ send us a dummy signal on realization
-					unless ($select_count) {
-					  $select_count = 1;
-					  return 1;
-					}
-					my ($model, $iter) = $select->get_selected();
-					if ($model) {
-                             my $id = $model->get($iter, 1);
-                             $current_device = $data{$id};
-                             
-                             if ($current_device) {
-                                 gtktext_insert($text, [ map  {
-                                     if ($fields{$_}[0]) {
-                                         [  $fields{$_}[0] . ": ", { 'foreground' => 'royalblue3' } ],
-                                           [ "$current_device->{$_}\n\n", { 'foreground' => ($_ eq 'driver' && $current_device->{$_} eq 'unknown' ? 'indian red' : 'black') } ]
-                                       } else {
-                                           print "Warning: skip \"$_\" field => \"$current_device->{$_}\"\n\n";
-                                           ();
-                                       }
-                                 } sort keys %$current_device ]);
-                                 
-                                 # we've valid driver, let's offer to configure it
-                                 show_hide(exists $current_device->{driver} &&  $current_device->{driver} !~ /(unknown|.*\|.*)/ &&  $current_device->{driver} !~ /^Card:/, $module_cfg_button);
-                                 
-                                 $current_configurator = $configurators{$id};
-                                 show_hide(-x $current_configurator, $config_button);
-                                 return 1;
-                             }
-					}
-					# hide buttons if needed
-					$text->get_buffer->set_text('', -1); # erase all previous text
-					$config_button->hide;
-					$module_cfg_button->hide;
-                     });
-
-    # Fill the graphic tree with a "tree branch" widget per device category
-    foreach (@class_tree) {
-        my ($devices_list, $title, $icon, $configurator) = @$_;
-        my $parent_iter = Gtk2::TreeIter->new;
-        $tree_model->append($parent_iter, undef);
-        $tree_model->set($parent_iter, [ 0 => gtkcreate_pixbuf($icon), 1 => $title ]);
-
-        # Fill the graphic tree with a "tree leaf" widget per device
-        foreach (@$devices_list) {
-            my $custom_id = $_->{custom_id};
-            delete $_->{custom_id};
-            $custom_id .= ' ' while exists($data{$custom_id}); # get a unique id for eg bt8xx audio/video funtions
-            $tree_model->append_set($parent_iter, [ 1 => $custom_id ]);
-            $data{$custom_id} = $_;
-            $configurators{$custom_id} = $configurator;
-        }
-        $tree->expand_row($tree_model->get_path($parent_iter), 1) unless $title eq "Unknown/Others";
-    }
-
-    $SIG{CHLD} = sub { undef $pid; $statusbar->pop($sig_id) };
-    $w->{rwindow}->signal_connect(delete_event => \&quit_global);
-    $w->{rwindow}->set_position('center') unless $::isEmbedded;
-
-    foreach (['PRINTERS_DETECTION', N("/Autodetect printers")], ['MODEMS_DETECTION', N("/Autodetect modems")]) {
-        $check_boxes{$_->[0]} = $factory->get_widget("<main>".N("/Options").$_->[1]);
-        $options{$_->[0]} = 0 unless defined($options{$_->[0]}); # force detection by default
-        $check_boxes{$_->[0]}->set_active($options{$_->[0]});    # restore saved values
-    }
-
-    $w->{rwindow}->show_all();
-    undef $wait;
-    gtkset_mousecursor_normal();
-    $_->hide foreach $module_cfg_button, $config_button; # hide buttons while no device
-    $w->main;
-}
-
-
-sub quit_global {
-    kill(15, $pid) if $pid;
-    setVarsInSh($conffile, \%options);
-    ugtk2->exit(0);
-}
-
-sub show_hide {
-    my ($bool, $button) = @_;
-    if ($bool) { $button->show() } else { $button->hide() }
-}
-
-
-1;
diff --git a/perl-install/standalone/harddrake2 b/perl-install/standalone/harddrake2
index 3a798b021..00fd7e4bd 100755
--- a/perl-install/standalone/harddrake2
+++ b/perl-install/standalone/harddrake2
@@ -1,8 +1,286 @@
 #!/usr/bin/perl
 
+use strict;
+use diagnostics;
 use lib qw(/usr/lib/libDrakX);
 use standalone;
 use common;
-use harddrake::ui;
 
-harddrake::ui->new;
+require harddrake::data;
+use ugtk2 qw(:create :helpers :wrappers);
+use interactive;
+
+
+# { field => [ short_translation, full_description] }
+my %fields = 
+    (
+     "alternative_drivers" => [ N("Alternative drivers"),
+                                N("the list of alternative drivers for this sound card") ],
+     "bus" => 
+     [ N("Bus"), 
+       N("this is the physical bus on which the device is plugged (eg: PCI, USB, ...)") ],
+     "channel" => [N("Channel"), N("EIDE/SCSI channel")],
+	 "bogomips" => [N("Bogomips"), N("The GNU/Linux kernel needs to do run a calculation loop at boot time
+	 to initialize a timer counter.  Its result is stored as bogomips as a way to \"benchmark\" the cpu.")],
+     "bus_id" => 
+     [ N("Bus identification"), 
+       N("- PCI and USB devices: this list the vendor, device, subvendor and subdevice PCI/USB ids") ],
+     "bus_location" => 
+     [ N("Location on the bus"), 
+       N("- pci devices: this gives the PCI slot, device and function of this card
+- eide devices: the device is either a slave or a master device
+- scsi devices: the scsi bus and the scsi device ids") ],
+     "cache size" => [ N("Cache size"), N("Size of the (second level) cpu cache") ],
+     "coma_bug" => [ N("Coma bug:"), N("Does this cpu has Cyrix 6x86 Coma bug ?") ],
+     "cpu family" => [ N("Cpuid family"), N("Family of the cpu (eg: 6 for i686 class)") ],
+     "cpuid level" => [ N("Cpuid level"), N("Information level that one can obtain through the cpuid instruction") ],
+     "cpu MHz" => [ N("Frequency (MHz)"), N("The cpu frequency in Mhz (Mega herz which in first approximation may be coarsely assimilated to number of instructions the cpu is able to execute per second)") ],
+     "description" => [ N("Description"), N("This field describe the device") ],
+     "device" => [ N("Old device file"),
+                   N("old static device name used in dev package") ],
+     "devfs_device" => [ N("New devfs device"),  
+                         N("new dinamic device name generated by incore kernel devfs") ],
+     "driver" => [ N("Module"), N("the module of the GNU/Linux kernel that handle that device") ],
+     "flags" => [ N("Flags"), N("CPU flags reported by the kernel") ],
+     "fdiv_bug" => [ N("Fdiv bug"), 
+                     N("Early Intel Pentium chips manufactured have a bug in their floating point processor which did not achieve the attended precision when performing a Floating point DIVision (FDIV)") ],
+
+
+     "fpu" => [ N("Is FPU present"), N("yes means the processor has an arithmetic coprocessor") ],
+     "fpu_exception" => [ N("Does FPU have an irq vector"), N("yes means the arithmetic coprocessor has an exception vector attached") ],
+     "f00f_bug" => [N("F00f bug"), N("Early pentium were buggy and freezed when decoding the F00F bytecode")],
+     "hlt_bug" => [ N("Halt bug"), 
+                    N("Some of the early i486DX-100 chips cannot reliably return to operating mode after the \"halt\" instruction is used") ],
+
+     "info" => [N("Floppy format"), N("Format of floppies the drive accept")],
+     "level" => [N("Level"), N("Sub generation of the cpu")],
+     "media_type" => [ N("Media class"), N("class of hardware device") ],
+     "Model" => [N("Model"), N("hard disk model")],
+     "model" => [N("Model"), N("Generation of the cpu (eg: 8 for PentiumIII, ...)")],
+     "model name" => [N("Model name"), N("Official vendor name of the cpu")],
+     "nbuttons" => [ N("Number of buttons"), "the number of buttons the mouse have" ],
+     "name" => [ N("Name"), "the name of the cpu" ],
+     "port" => [N("Port"), N("network printer port")],
+     "processor" => [ N("Processor ID"), N("the number of the processor") ],
+     "stepping" => [ N("Model stepping"), N("Stepping of the cpu (sub model (generation) number)") ],
+     "type" => [ N("Type"), N("The type of bus on which the mouse is connected") ],
+     "Vendor" => [ N("Vendor"), N("the vendor name of the device") ],
+     "vendor_id" => [ N("Vendor"), N("the vendor name of the processor") ]
+     );
+
+
+my ($in, %IDs, $pid, $w);
+
+my (%options, %check_boxes);
+my $conffile = "/etc/sysconfig/harddrake2/ui.conf";
+
+my ($modem_check_box, $printer_check_box, $current_device, $current_configurator);
+
+my @menu_items = 
+    (
+     {   path => N("/_File"), type => '<Branch>' },
+     {   path => N("/_File").N("/_Quit"), accelerator => N("<control>Q"), callback => \&quit_global    },
+     {   path => N("/_Options").N("/Autodetect _printers"), type => '<CheckItem>',
+         callback => sub { $options{PRINTERS_DETECTION} = $check_boxes{PRINTERS_DETECTION}->active } },
+     {   path => N("/_Options").N("/Autodetect _modems"), type => '<CheckItem>',
+         callback => sub { $options{MODEMS_DETECTION} = $check_boxes{MODEMS_DETECTION}->active } },
+     {   path => N("/_Help"), type => '<Branch>' },
+     {
+         path => N("/_Help").N("/_Help..."), 
+         callback => sub {
+             if ($current_device) {
+                 $in->ask_warn(N("Harddrake help"), 
+                               N("Description of the fields:\n\n")
+                               . join("\n\n", map { if_($fields{$_}[0], "$fields{$_}[0]: $fields{$_}[1]") } sort keys %$current_device))
+                 } else {
+                     $in->ask_warn(N("Select a device !"), N("Once you've selected a device, you'll be able to see explanations on fields displayed on the right frame (\"Information\")"))
+                 }
+             }
+     },
+     {   path => N("/_Help").N("/_Report Bug"),
+         callback => sub { unless (fork()) { exec("drakbug --report harddrake2 &") } } },
+     {   path => N("/_Help").N("/_About..."), 
+         callback => sub {
+             $in->ask_warn(N("About Harddrake"), 
+                           join("", N("This is HardDrake, a Mandrake hardware configuration tool.\nVersion:"), " $harddrake::data::version\n", 
+                                 N("Author:"), " Thierry Vignaud <tvignaud\@mandrakesoft.com> \n\n",
+                                 formatAlaTeX($::license)));
+         }
+     }
+     );
+my ($sig_id, $wait);
+$in = 'interactive'->vnew('su', 'default');
+$wait = $in->wait_message(N("Please wait"), N("Detection in progress"));
+gtkflush();
+%options = getVarsFromSh($conffile);
+
+# Build the gui
+add_icon_path('/usr/share/pixmaps/harddrake2/');
+$w = ugtk2->new(N("Harddrake2 version ") . $harddrake::data::version);
+$w->{window}->set_size_request(760, 550) unless $::isEmbedded;
+my ($menubar, $factory) = create_factory_menu($w->{rwindow}, @menu_items);
+my $tree_model = Gtk2::TreeStore->new(Gtk2::GType->OBJECT, Gtk2::GType->STRING);
+my $statusbar;
+$w->{window}->add(gtkpack_(0, Gtk2::VBox->new(0, 0),
+                           if_(!$::isEmbedded, 0, $menubar),
+                           1, create_hpaned(gtkadd(new Gtk2::Frame(N("Detected hardware")), 
+                                                   create_scrolled_window(my $tree = Gtk2::TreeView->new_with_model($tree_model))),
+                                            gtkpack_(0, Gtk2::VBox->new(0, 0),
+                                                     1, gtkadd(gtkset_size_request(new Gtk2::Frame(N("Information")), 300, 450),
+                                                               create_scrolled_window(my $text = Gtk2::TextView->new)), 
+                                                     0, my $module_cfg_button = gtksignal_connect(new Gtk2::Button(N("Configure module")),
+                                                                                                  clicked => sub {
+                                                                                                      require modules::interactive;
+                                                                                                      modules::interactive::config_window($in, $current_device);
+                                                                                                      gtkset_mousecursor_normal();
+                                                                                                  }),
+                                                     0, my $config_button = gtksignal_connect(new Gtk2::Button(N("Run config tool")),
+                                                                                              # we've a configurator, let's add a button for it and show it
+                                                                                              clicked => sub {
+                                                                                                  return 1 if defined $pid;
+                                                                                                  if ($pid = fork()) {
+                                                                                                      $sig_id = $statusbar->push($statusbar->get_context_id("id"),
+                                                                                                                                 N("Running \"%s\" ...", $current_configurator));
+                                                                                                  } else {
+                                                                                                      exec($current_configurator) or die "$current_configurator missing\n";
+                                                                                                  }
+                                                                                              })
+                                                     ),
+                                            'resize2' => 1
+                                            ),
+                           0, $statusbar = new Gtk2::Statusbar,
+                           if_($::isEmbedded, 0, gtksignal_connect(my $but = new Gtk2::Button(N("Quit")),
+                                                                   'clicked' => \&quit_global))
+                           )
+                  );
+
+#    $tree->set_column_auto_resize(0, 1);
+my (%data, %configurators);
+gtktext_append($text, [ [ N_("Click on a device in the left tree in order to get its information displayed here.") ] ]);
+$tree->append_column(my $pixcolumn  = Gtk2::TreeViewColumn->new_with_attributes(undef, Gtk2::CellRendererPixbuf->new, 'pixbuf' => 0));
+$tree->append_column(my $textcolumn = Gtk2::TreeViewColumn->new_with_attributes(undef, Gtk2::CellRendererText->new, 'text' => 1));
+#    $textcolumn->set_min_width(350);
+$tree->set_headers_visible(0);
+my $select_count;
+my $selection = gtksignal_connect($tree->get_selection(), 'changed' => sub {
+    my ($select) = @_;
+    # gtk+ send us a dummy signal on realization
+    unless ($select_count) {
+        $select_count = 1;
+        return 1;
+    }
+    my ($model, $iter) = $select->get_selected();
+    if ($model) {
+        my $id = $model->get($iter, 1);
+        $current_device = $data{$id};
+        
+        if ($current_device) {
+            gtktext_insert($text, [ map  {
+                if ($fields{$_}[0]) {
+                    [  $fields{$_}[0] . ": ", { 'foreground' => 'royalblue3' } ],
+                    [ "$current_device->{$_}\n\n", { 'foreground' => ($_ eq 'driver' && $current_device->{$_} eq 'unknown' ? 'indian red' : 'black') } ]
+                    } else {
+                        print "Warning: skip \"$_\" field => \"$current_device->{$_}\"\n\n";
+                        ();
+                    }
+            } sort keys %$current_device ]);
+            
+            # we've valid driver, let's offer to configure it
+            show_hide(exists $current_device->{driver} &&  $current_device->{driver} !~ /(unknown|.*\|.*)/ &&  $current_device->{driver} !~ /^Card:/, $module_cfg_button);
+            
+            $current_configurator = $configurators{$id};
+            show_hide(-x $current_configurator, $config_button);
+            return 1;
+        }
+    }
+    # hide buttons if needed
+    $text->get_buffer->set_text('', -1); # erase all previous text
+    $config_button->hide;
+    $module_cfg_button->hide;
+});
+
+# Fill the graphic devices tree with a "tree branch" widget per device category
+foreach (@harddrake::data::tree) {
+    my ($Ident, $title, $icon, $configurator, $detector) = @$_;
+    next if ref($detector) ne "CODE"; #skip class witouth detector
+    next if $Ident =~ /(MODEM|PRINTER)/ && $::testing;
+    next if $Ident =~ /MODEM/ && !$options{MODEMS_DETECTION};
+    next if $Ident =~ /PRINTER/ && !$options{PRINTERS_DETECTION};
+#    print N("Probing %s class\n", $Ident);
+#    standalone::explanations("Probing %s class\n", $Ident);
+
+    my @devices = &$detector;
+    next unless listlength(@devices); # Skip empty class (no devices)
+
+    my $parent_iter = Gtk2::TreeIter->new;
+    $tree_model->append($parent_iter, undef);
+    $tree_model->set($parent_iter, [ 0 => gtkcreate_pixbuf($icon), 1 => $title ]);
+
+    # Fill the graphic tree with a "tree leaf" widget per device
+    foreach (@devices) {
+        my $custom_id = harddrake::data::custom_id($_, $title);
+        if (exists $_->{bus} && $_->{bus} eq "PCI") {
+            my $i = $_;
+            $_->{bus_id} = join ':', map { if_($i->{$_} ne "65535",  sprintf("%lx", $i->{$_})) } qw(vendor id subvendor subid);
+            $_->{bus_location} = join ':', map { sprintf("%lx", $i->{$_}) } qw(pci_bus pci_device pci_function);
+        }
+        # we really should test for $title there:
+        # split description into manufacturer/description
+        ($_->{Vendor}, $_->{description}) = split(/\|/, $_->{description}) if exists $_->{description};
+
+        if (exists $_->{val}) { # Scanner ?
+            my $val = $_->{val};
+            ($_->{Vendor}, $_->{description}) = split(/\|/, $val->{DESCRIPTION});
+        }
+        # EIDE detection incoherency:
+        if (exists $_->{bus} && $_->{bus} eq 'ide') {
+            $_->{channel} = $_->{channel} ? N("secondary") : N("primary");
+            delete $_->{info};
+        } elsif ((exists $_->{id}) && $_->{bus} !~ /USB|PCI/) {
+            # SCSI detection incoherency:
+            my $i = $_;
+            $_->{bus_location} = join ':', map { sprintf("%lx", $i->{$_}) } qw(bus id);
+        }
+        if ($Ident eq "AUDIO") {
+            require harddrake::sound;
+            my $alter = harddrake::sound::get_alternative($_->{driver});
+            $_->{alternative_drivers} = join(':', @$alter) if $alter->[0] ne 'unknown';
+        }
+        foreach my $i (qw(vendor id subvendor subid pci_bus pci_device pci_function MOUSETYPE XMOUSETYPE unsafe val devfs_prefix wacom auxmouse)) { delete $_->{$i} };
+        $_->{device} = '/dev/'.$_->{device} if exists $_->{device};
+
+        $custom_id .= ' ' while exists($data{$custom_id}); # get a unique id for eg bt8xx audio/video funtions
+        $tree_model->append_set($parent_iter, [ 1 => $custom_id ]);
+        $data{$custom_id} = $_;
+        $configurators{$custom_id} = $configurator;
+    }
+    $tree->expand_row($tree_model->get_path($parent_iter), 1) unless $title eq "Unknown/Others";
+}
+
+$SIG{CHLD} = sub { undef $pid; $statusbar->pop($sig_id) };
+$w->{rwindow}->signal_connect(delete_event => \&quit_global);
+$w->{rwindow}->set_position('center') unless $::isEmbedded;
+
+foreach (['PRINTERS_DETECTION', N("/Autodetect printers")], ['MODEMS_DETECTION', N("/Autodetect modems")]) {
+    $check_boxes{$_->[0]} = $factory->get_widget("<main>".N("/Options").$_->[1]);
+    $options{$_->[0]} = 0 unless defined($options{$_->[0]}); # force detection by default
+    $check_boxes{$_->[0]}->set_active($options{$_->[0]});    # restore saved values
+}
+
+$w->{rwindow}->show_all();
+undef $wait;
+gtkset_mousecursor_normal();
+$_->hide foreach $module_cfg_button, $config_button; # hide buttons while no device
+$w->main;
+
+
+sub quit_global {
+    kill(15, $pid) if $pid;
+    setVarsInSh($conffile, \%options);
+    ugtk2->exit(0);
+}
+
+sub show_hide {
+    my ($bool, $button) = @_;
+    if ($bool) { $button->show() } else { $button->hide() }
+}