updated pot file

2 files changed, 536 insertions, 435 deletions

diff --git a/perl-install/share/po/DrakX.pot b/perl-install/share/po/DrakX.pot
index 54d573de8..77d168c4a 100644
--- a/perl-install/share/po/DrakX.pot
+++ b/perl-install/share/po/DrakX.pot
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
-"POT-Creation-Date: 2003-08-15 11:33+0200\n"
+"POT-Creation-Date: 2003-08-18 17:35+0200\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -83,6 +83,11 @@ msgstr ""
 msgid "Restore partition table"
 msgstr ""
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure hostname..."
+msgstr ""
+
 #: ../../printer/cups.pm:1
 #, c-format
 msgid "On CUPS server \"%s\""
@@ -243,6 +248,11 @@ msgstr ""
 msgid "CUPS configuration"
 msgstr ""
 
+#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Total progress"
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Hong Kong"
@@ -1410,14 +1420,6 @@ msgstr ""
 msgid "Loopback"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-
 #: ../../standalone/drakxtv:1
 #, c-format
 msgid "West Europe"
@@ -1449,6 +1451,11 @@ msgstr ""
 msgid "Swaziland"
 msgstr ""
 
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Copying %s"
@@ -1459,11 +1466,6 @@ msgstr ""
 msgid "Choose color"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr ""
-
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Syriac"
@@ -2693,12 +2695,12 @@ msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Armenia"
+msgid "Fiji"
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Fiji"
+msgid "Armenia"
 msgstr ""
 
 #: ../../any.pm:1
@@ -3045,11 +3047,6 @@ msgstr ""
 msgid "Warning: testing this graphic card may freeze your computer"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Bad Ip"
-msgstr ""
-
 #: ../../any.pm:1
 #, c-format
 msgid "The user name must contain only lower cased letters, numbers, `-' and `_'"
@@ -3519,6 +3516,11 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "No Mask"
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Network interface already configured"
@@ -3719,11 +3721,6 @@ msgstr ""
 msgid "Choose a monitor"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Bad Mask"
-msgstr ""
-
 #: ../../any.pm:1
 #, c-format
 msgid "Empty label not allowed"
@@ -4522,14 +4519,14 @@ msgstr ""
 msgid "Under Devel ... please wait."
 msgstr ""
 
-#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Czech Republic"
+msgid "Egypt"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Egypt"
+msgid "Czech Republic"
 msgstr ""
 
 #: ../../help.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../install_steps_interactive.pm:1
@@ -4743,125 +4740,6 @@ msgstr ""
 msgid "To get access to printers on remote CUPS servers in your local network you only need to turn on the \"Automatically find available printers on remote machines\" option; the CUPS servers inform your machine automatically about their printers. All printers currently known to your machine are listed in the \"Remote printers\" section in the main window of Printerdrake. If your CUPS server(s) is/are not in your local network, you have to enter the IP address(es) and optionally the port number(s) here to get the printer information from the server(s)."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a graphical interface\n"
-"        \t\tto help manage/customize these images. To create the file \n"
-"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n"
-"        \t\tdhcpd.conf, you should create the etherboot images for at least one full kernel.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk.nbi\";\n"
-"\t\t\t\t\t#hdw_config                true;\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can either be 'thin'\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, while fat clients run \n"
-"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n"
-"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are security issues in \n"
-"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access to the local\n"
-"\t\t\tsubnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  Clients can either \n"
-"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine and allows local \n"
-"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n"
-"\t\t\tby creating seperate config files associated with the client's IP address and creating \n"
-"\t\t\tread/write mount points to allow the client to alter the file. Once you are satisfied \n"
-"\t\t\twith the configuration, you can remove root login priviledges from the client.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client hardware configuration, \n"
-"        \t\tdrakTermServ will help create these files.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client hardware configuration, \n"
-"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n"
-"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local configuration can be turned\n"
-"        back off, retaining the configuration files, once the client machine is configured.\n"
-"\t\t\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-""
-msgstr ""
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "%s is not in the scanner database, configure it manually?"
@@ -5059,6 +4937,13 @@ msgstr ""
 msgid "Maltese (US)"
 msgstr ""
 
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"The creation of the boot floppy has been successfully completed \n"
+""
+msgstr ""
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -5590,6 +5475,11 @@ msgstr ""
 msgid "Other OS (SunOS...)"
 msgstr ""
 
+#: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Hostname configuration"
+msgstr ""
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Install/Upgrade"
@@ -5672,11 +5562,6 @@ msgstr ""
 msgid "Lilo/grub mode"
 msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Output"
-msgstr ""
-
 #: ../../loopback.pm:1
 #, c-format
 msgid ""
@@ -5762,6 +5647,22 @@ msgstr ""
 msgid "Floppy"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network."
+msgstr ""
+
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Ghostscript referencing"
@@ -5848,14 +5749,14 @@ msgid ""
 "available server."
 msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "4 billion colors (32 bits)"
+msgid "Micronesia"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Micronesia"
+msgid "4 billion colors (32 bits)"
 msgstr ""
 
 #: ../../steps.pm:1
@@ -5908,11 +5809,6 @@ msgstr ""
 msgid "Polish (qwerty layout)"
 msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "activate now"
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -6261,6 +6157,32 @@ msgstr ""
 msgid "Remove selected server"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where mkinitrd-net\n"
+"        \t\tputs it's images."
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "French Southern Territories"
@@ -6607,6 +6529,11 @@ msgstr ""
 msgid "Canada (cable)"
 msgstr ""
 
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Floppy creation completed"
+msgstr ""
+
 #: ../../help.pm:1 ../../help.pm:1
 #, c-format
 msgid "Upgrade"
@@ -6647,6 +6574,11 @@ msgid ""
 "Then choose action ``Mount point'' and set it to `/'"
 msgstr ""
 
+#: ../../lang.pm:1
+#, c-format
+msgid "Western Sahara"
+msgstr ""
+
 #: ../../network/network.pm:1
 #, c-format
 msgid "Proxy should be http://..."
@@ -6657,11 +6589,6 @@ msgstr ""
 msgid "South Africa"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Western Sahara"
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Eject tape after the backup"
@@ -6704,6 +6631,20 @@ msgid ""
 "(e.g, for faster access on the news spool to speed up news servers)."
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
+"        \t\ton the root filesystem of the server. By allowing local client hardware configuration, \n"
+"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/sysconfig/mouse, \n"
+"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+"        Note: Enabling local client hardware configuration does enable root login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local configuration can be turned\n"
+"        back off, retaining the configuration files, once the client machine is configured."
+msgstr ""
+
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "Sticky-bit"
@@ -7351,6 +7292,15 @@ msgstr ""
 msgid "Alternative test page (Letter)"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own unique configuration files\n"
+"        \t\ton the root filesystem of the server. By allowing local client hardware configuration, \n"
+"        \t\tdrakTermServ will help create these files."
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid ""
@@ -8192,6 +8142,15 @@ msgstr ""
 msgid "Total Progress"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this file."
+msgstr ""
+
 #: ../../help.pm:1
 #, c-format
 msgid ""
@@ -8663,7 +8622,7 @@ msgstr ""
 msgid "Unselect fonts installed"
 msgstr ""
 
-#: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 ../../my_gtk.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../interactive/newt.pm:1 ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/drakgw:1 ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/logdrake:1 ../../standalone/mousedrake:1 ../../standalone/net_monitor:1
+#: ../../any.pm:1 ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 ../../my_gtk.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../interactive/newt.pm:1 ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakfont:1 ../../standalone/drakgw:1 ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/logdrake:1 ../../standalone/mousedrake:1 ../../standalone/net_monitor:1
 #, c-format
 msgid "Cancel"
 msgstr ""
@@ -9433,7 +9392,7 @@ msgid ""
 "The new \"%s\" driver'll only be used on next bootstrap."
 msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakfloppy:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Expert Mode"
 msgstr ""
@@ -9594,6 +9553,20 @@ msgstr ""
 msgid "/dev/hdb"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks like:"
+msgstr ""
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -9808,14 +9781,14 @@ msgstr ""
 msgid "You have more than one hard drive, which one do you install linux on?"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Boot ISO"
+msgid "Eritrea"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Eritrea"
+msgid "Boot ISO"
 msgstr ""
 
 #: ../../standalone/drakfont:1
@@ -9923,6 +9896,11 @@ msgid ""
 ""
 msgstr ""
 
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Error while parsing \"MODULES\" line from %s"
+msgstr ""
+
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Add a scanner manually"
@@ -9948,6 +9926,11 @@ msgstr ""
 msgid "Search for fonts in installed list"
 msgstr ""
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Hostname"
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "The Local Network did not finish with `.0', bailing out."
@@ -10627,6 +10610,11 @@ msgstr ""
 msgid "Turks and Caicos Islands"
 msgstr ""
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "No Ip"
+msgstr ""
+
 #: ../../help.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1 ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1
 #, c-format
 msgid "<- Previous"
@@ -10947,11 +10935,6 @@ msgstr ""
 msgid "Hungary"
 msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Total progess"
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "New Zealand"
@@ -11690,14 +11673,14 @@ msgstr ""
 msgid "Where do you want to mount %s?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Restore Via Network"
+msgid "Algeria"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Algeria"
+msgid "Restore Via Network"
 msgstr ""
 
 #: ../../any.pm:1
@@ -11844,6 +11827,20 @@ msgstr ""
 msgid "Both Shift keys simultaneously"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
+msgstr ""
+
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Select a scanner model"
@@ -12281,6 +12278,17 @@ msgid ""
 "Press \"%s\" to continue."
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a graphical interface\n"
+"        \t\tto help manage/customize these images. To create the file \n"
+"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an include in \n"
+"        \t\tdhcpd.conf, you should create the etherboot images for at least one full kernel."
+msgstr ""
+
 #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Interface \"%s\""
@@ -12603,6 +12611,11 @@ msgstr ""
 msgid "April"
 msgstr ""
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Deactivate now"
+msgstr ""
+
 #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
 msgid "Mandatory package %s is missing"
@@ -12613,11 +12626,16 @@ msgstr ""
 msgid "Philippines"
 msgstr ""
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../my_gtk.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../interactive/newt.pm:1 ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/mousedrake:1 ../../standalone/net_monitor:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../my_gtk.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../ugtk2.pm:1 ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/gtk.pm:1 ../../interactive/http.pm:1 ../../interactive/http.pm:1 ../../interactive/newt.pm:1 ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../interactive/stdio.pm:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakbackup:1 ../../standalone/drakboot:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1 ../../standalone/drakfloppy:1 ../../standalone/drakperm:1 ../../standalone/drakperm:1 ../../standalone/draksec:1 ../../standalone/mousedrake:1 ../../standalone/net_monitor:1
 #, c-format
 msgid "Ok"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "drakTermServ Overview"
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Print Queue Name"
@@ -13783,6 +13801,11 @@ msgstr ""
 msgid "Print test pages"
 msgstr ""
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Activate now"
+msgstr ""
+
 #: ../../Xconfig/card.pm:1
 #, c-format
 msgid "64 MB or more"
@@ -14500,14 +14523,14 @@ msgstr ""
 msgid "No test pages"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Adapter %s: %s"
+msgid "Falkland Islands (Malvinas)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
+msgid "Adapter %s: %s"
 msgstr ""
 
 #: ../../standalone/drakfloppy:1
@@ -15229,11 +15252,6 @@ msgstr ""
 msgid "Remote host name"
 msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "deactivate now"
-msgstr ""
-
 #: ../../any.pm:1
 #, c-format
 msgid "access to X programs"
@@ -15509,6 +15527,31 @@ msgstr ""
 msgid "Preview"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can either be 'thin'\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, while fat clients run \n"
+"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$\\$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and gdm.conf are \n"
+"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are security issues in \n"
+"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access to the local\n"
+"\t\t\tsubnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  Clients can either \n"
+"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine and allows local \n"
+"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. This is enabled \n"
+"\t\t\tby creating seperate config files associated with the client's IP address and creating \n"
+"\t\t\tread/write mount points to allow the client to alter the file. Once you are satisfied \n"
+"\t\t\twith the configuration, you can remove root login priviledges from the client.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing clients."
+msgstr ""
+
 #: ../../standalone/drakbug:1
 #, c-format
 msgid "Remote Control"
@@ -16198,6 +16241,14 @@ msgstr ""
 msgid ", USB printer"
 msgstr ""
 
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk:\n"
+"\n"
+"<span foreground=\"Red\"><tt>%s</tt></span>"
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Incremental backups only save files that have changed or are new since the last backup."
diff --git a/perl-install/share/po/uz@Cyrl.po b/perl-install/share/po/uz@Cyrl.po
index 8f3b7153e..cd23a7258 100644
--- a/perl-install/share/po/uz@Cyrl.po
+++ b/perl-install/share/po/uz@Cyrl.po
@@ -8,7 +8,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-uz@Cyrl\n"
-"POT-Creation-Date: 2003-08-15 11:33+0200\n"
+"POT-Creation-Date: 2003-08-18 17:35+0200\n"
 "PO-Revision-Date: 2003-08-18 01:08+0200\n"
 "Last-Translator: Mashrab Kuvatov <kmashrab@uni-bremen.de>\n"
 "Language-Team: Uzbek <uz-li@yahoogroups.com>\n"
@@ -88,6 +88,11 @@ msgstr "Банднинг қайси турини қўшмоқчисиз?"
 msgid "Restore partition table"
 msgstr "Дискнинг қисмлар жадвалини қайтадан тиклаш"
 
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Configure hostname..."
+msgstr "Сичқончани мослаш"
+
 #: ../../printer/cups.pm:1
 #, c-format
 msgid "On CUPS server \"%s\""
@@ -257,6 +262,11 @@ msgstr "Қуйидаги пакетлар ўрнатилади"
 msgid "CUPS configuration"
 msgstr "CUPS'ни мослаш"
 
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progress"
+msgstr "Синов бетлари"
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Hong Kong"
@@ -1619,14 +1629,6 @@ msgstr "Xinerama кенгайтмасидан фойдаланиш"
 msgid "Loopback"
 msgstr "Loopback"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
-msgstr ""
-
 #: ../../standalone/drakxtv:1
 #, c-format
 msgid "West Europe"
@@ -1658,6 +1660,11 @@ msgstr "Мослаш"
 msgid "Swaziland"
 msgstr "Свазиленд"
 
+#: ../../lang.pm:1
+#, c-format
+msgid "Dominican Republic"
+msgstr "Доминикана Республикаси"
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Copying %s"
@@ -1668,11 +1675,6 @@ msgstr "%s'дан нусха кўчирилмоқда"
 msgid "Choose color"
 msgstr "Рангни танлаш"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Dominican Republic"
-msgstr "Доминикана Республикаси"
-
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Syriac"
@@ -2983,13 +2985,13 @@ msgstr "Хостнинг номи %s"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Armenia"
-msgstr "Арманистон"
+msgid "Fiji"
+msgstr "Фижи"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Fiji"
-msgstr "Фижи"
+msgid "Armenia"
+msgstr "Арманистон"
 
 #: ../../any.pm:1
 #, c-format
@@ -3383,11 +3385,6 @@ msgstr ""
 "Диққат: бу график картани синаб кўриш компютерни қотиб қолишига олиб келиши "
 "мумкин"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Bad Ip"
-msgstr "Нотўғри IP"
-
 #: ../../any.pm:1
 #, c-format
 msgid ""
@@ -3886,6 +3883,11 @@ msgstr "GlidePoint"
 msgid "Start: sector %s\n"
 msgstr "Боши: сектор %s\n"
 
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "No Mask"
+msgstr "Нотўғри маска"
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "Network interface already configured"
@@ -4090,11 +4092,6 @@ msgstr ""
 msgid "Choose a monitor"
 msgstr "Мониторни танлаш"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Bad Mask"
-msgstr "Нотўғри маска"
-
 #: ../../any.pm:1
 #, c-format
 msgid "Empty label not allowed"
@@ -4935,16 +4932,16 @@ msgstr "Руминча (qwerty)"
 msgid "Under Devel ... please wait."
 msgstr ""
 
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Czech Republic"
-msgstr "Чех Республикаси"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Egypt"
 msgstr "Миср"
 
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Czech Republic"
+msgstr "Чех Республикаси"
+
 #: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Sound card"
@@ -5174,169 +5171,6 @@ msgid ""
 "information from the server(s)."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images. To create the file \n"
-"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \t\tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t\t#hdw_config                true;\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be 'thin'\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run \n"
-"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
-"\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
-"security issues in \n"
-"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"\t\t\tsubnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  "
-"Clients can either \n"
-"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine "
-"and allows local \n"
-"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
-"This is enabled \n"
-"\t\t\tby creating seperate config files associated with the client's IP "
-"address and creating \n"
-"\t\t\tread/write mount points to allow the client to alter the file. Once "
-"you are satisfied \n"
-"\t\t\twith the configuration, you can remove root login priviledges from the "
-"client.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"        \t\tdrakTermServ will help create these files.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. By allowing local client "
-"hardware configuration, \n"
-"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
-"sysconfig/mouse, \n"
-"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
-"\n"
-"        Note: Enabling local client hardware configuration does enable root "
-"login to the terminal \n"
-"        server on each client machine that has this feature enabled.  Local "
-"configuration can be turned\n"
-"        back off, retaining the configuration files, once the client machine "
-"is configured.\n"
-"\t\t\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
-
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "%s is not in the scanner database, configure it manually?"
@@ -5539,6 +5373,11 @@ msgstr ""
 msgid "Maltese (US)"
 msgstr "Малта (АҚШ)"
 
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "The creation of the boot floppy has been successfully completed \n"
+msgstr ""
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -6114,6 +5953,11 @@ msgstr ""
 msgid "Other OS (SunOS...)"
 msgstr "Бошқа ОС (SunOS...)"
 
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Hostname configuration"
+msgstr "Системани мослаш"
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Install/Upgrade"
@@ -6207,11 +6051,6 @@ msgstr "-adobe-utopia-regular-r-*-*-33-*-*-*-p-*-iso8859-*,*-r-*"
 msgid "Lilo/grub mode"
 msgstr "Lilo/grub усули"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Output"
-msgstr ""
-
 #: ../../loopback.pm:1
 #, c-format
 msgid "Circular mounts %s\n"
@@ -6299,6 +6138,24 @@ msgstr ""
 msgid "Floppy"
 msgstr "Дискет"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network."
+msgstr ""
+
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Ghostscript referencing"
@@ -6384,16 +6241,16 @@ msgid ""
 "available server."
 msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
-#, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "4 миллиардта ранг (32 бит)"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Micronesia"
 msgstr "Микронезия"
 
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "4 billion colors (32 bits)"
+msgstr "4 миллиардта ранг (32 бит)"
+
 #: ../../steps.pm:1
 #, c-format
 msgid "License"
@@ -6446,11 +6303,6 @@ msgstr "Товуш носозликларини топиш ва бартараф
 msgid "Polish (qwerty layout)"
 msgstr "Полякча (qwerty)"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "activate now"
-msgstr ""
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -6837,6 +6689,36 @@ msgstr "Ускунани танланг!"
 msgid "Remove selected server"
 msgstr "Танланган серверни олиб ташлаш"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images."
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "French Southern Territories"
@@ -7213,6 +7095,11 @@ msgstr "%s турида %s'ни формат қилиш муваффақиятс
 msgid "Canada (cable)"
 msgstr "Канада (кабел)"
 
+#: ../../standalone/drakfloppy:1
+#, fuzzy, c-format
+msgid "Floppy creation completed"
+msgstr "Алоқа ўрнатилди."
+
 #: ../../help.pm:1
 #, c-format
 msgid "Upgrade"
@@ -7258,6 +7145,11 @@ msgstr ""
 "Бунинг учун, дискда янги қисм яратинг (ёки борини танланг).\n"
 "Кегин, \"Улаш ниқтаси\" амалини танланг ва уни \"/\"га ўрнатинг"
 
+#: ../../lang.pm:1
+#, c-format
+msgid "Western Sahara"
+msgstr "Ғарбий Сахара"
+
 #: ../../network/network.pm:1
 #, c-format
 msgid "Proxy should be http://..."
@@ -7268,11 +7160,6 @@ msgstr "Прокси \"http://...\" бўлиши керак"
 msgid "South Africa"
 msgstr "Жанубий Африка"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Western Sahara"
-msgstr "Ғарбий Сахара"
-
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Eject tape after the backup"
@@ -7315,6 +7202,26 @@ msgid ""
 "(e.g, for faster access on the news spool to speed up news servers)."
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+"        Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local "
+"configuration can be turned\n"
+"        back off, retaining the configuration files, once the client machine "
+"is configured."
+msgstr ""
+
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "Sticky-bit"
@@ -7998,6 +7905,17 @@ msgstr ""
 msgid "Alternative test page (Letter)"
 msgstr "Бошқа синов бети (Хат)"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \t\tdrakTermServ will help create these files."
+msgstr ""
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid ""
@@ -8893,6 +8811,18 @@ msgstr "муҳим"
 msgid "Total Progress"
 msgstr ""
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file."
+msgstr ""
+
 #: ../../help.pm:1
 #, c-format
 msgid ""
@@ -10191,7 +10121,6 @@ msgid ""
 msgstr ""
 
 #: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakfloppy:1
 #, c-format
 msgid "Expert Mode"
 msgstr "Эксперт усули"
@@ -10360,6 +10289,25 @@ msgstr "/dev/hda"
 msgid "/dev/hdb"
 msgstr "/dev/hdb"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:"
+msgstr ""
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -10587,16 +10535,16 @@ msgid "You have more than one hard drive, which one do you install linux on?"
 msgstr ""
 "Сизда биттадан кўп қаттиқ диск мавжуд. Уларни қайсига Linux'ни ўрнатасиз?"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Boot ISO"
-msgstr ""
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Eritrea"
 msgstr "Эритрия"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Boot ISO"
+msgstr ""
+
 #: ../../standalone/drakfont:1
 #, c-format
 msgid "Remove List"
@@ -10705,6 +10653,11 @@ msgid ""
 "\n"
 msgstr ""
 
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Error while parsing \"MODULES\" line from %s"
+msgstr ""
+
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Add a scanner manually"
@@ -10730,6 +10683,11 @@ msgstr "Танланганни тиклаш"
 msgid "Search for fonts in installed list"
 msgstr "Ўрнатилган рўйхатда шрифтларни қидириш"
 
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Hostname"
+msgstr "Компютернинг номи"
+
 #: ../../standalone/drakgw:1
 #, c-format
 msgid "The Local Network did not finish with `.0', bailing out."
@@ -11452,6 +11410,11 @@ msgstr "Қабул қилиш тезлиги:"
 msgid "Turks and Caicos Islands"
 msgstr "Туркс ва Каикос Ороллари"
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "No Ip"
+msgstr ""
+
 #: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
 #: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
@@ -11786,11 +11749,6 @@ msgstr ""
 msgid "Hungary"
 msgstr "Венгрия"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "Синов бетлари"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "New Zealand"
@@ -12563,16 +12521,16 @@ msgstr ""
 msgid "Where do you want to mount %s?"
 msgstr "Дискнинг %s қисмини қаерга уламоқчисиз?"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Restore Via Network"
-msgstr "Тармоқ орқали тиклаш"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Algeria"
 msgstr "Жазоир"
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Restore Via Network"
+msgstr "Тармоқ орқали тиклаш"
+
 #: ../../any.pm:1
 #, c-format
 msgid "Initrd-size"
@@ -12727,6 +12685,23 @@ msgstr "яратишнинг биринчи босқичи"
 msgid "Both Shift keys simultaneously"
 msgstr "Бир вақтда иккала Shift тугмалари"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0"
+msgstr ""
+
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "Select a scanner model"
@@ -13185,6 +13160,21 @@ msgstr ""
 "\n"
 "Давом этиш учун \"%s\" тугмасини босинг."
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images. To create the file \n"
+"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \t\tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel."
+msgstr ""
+
 #: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Interface \"%s\""
@@ -13517,6 +13507,11 @@ msgstr "Тармоқнинг мосламаси (%d адаптер)"
 msgid "April"
 msgstr "Апрель"
 
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Deactivate now"
+msgstr "ишлаяпти"
+
 #: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
 msgid "Mandatory package %s is missing"
@@ -13539,6 +13534,11 @@ msgstr "Филиппин"
 msgid "Ok"
 msgstr "Ок"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "drakTermServ Overview"
+msgstr ""
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Print Queue Name"
@@ -14777,6 +14777,11 @@ msgstr ""
 msgid "Print test pages"
 msgstr "Синов бетини босиб чиқариш"
 
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Activate now"
+msgstr "ишлаяпти"
+
 #: ../../Xconfig/card.pm:1
 #, c-format
 msgid "64 MB or more"
@@ -15554,16 +15559,16 @@ msgstr "Ҳаммасини тозалаш"
 msgid "No test pages"
 msgstr "Синов бети йўқ"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Адаптер %s: %s"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Falkland Islands (Malvinas)"
 msgstr "Фолкленд (Малвин) Ороллари"
 
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Adapter %s: %s"
+msgstr "Адаптер %s: %s"
+
 #: ../../standalone/drakfloppy:1
 #, c-format
 msgid "Boot disk creation"
@@ -16323,11 +16328,6 @@ msgstr ""
 msgid "Remote host name"
 msgstr "Узоқдаги хостнинг номи"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "deactivate now"
-msgstr ""
-
 #: ../../any.pm:1
 #, c-format
 msgid "access to X programs"
@@ -16626,6 +16626,45 @@ msgstr "жуда яхши"
 msgid "Preview"
 msgstr "Кўриб чиқиш"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be 'thin'\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
+"\\$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+"\t\t\tsubnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  "
+"Clients can either \n"
+"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine "
+"and allows local \n"
+"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
+"This is enabled \n"
+"\t\t\tby creating seperate config files associated with the client's IP "
+"address and creating \n"
+"\t\t\tread/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+"\t\t\twith the configuration, you can remove root login priviledges from the "
+"client.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing clients."
+msgstr ""
+
 #: ../../standalone/drakbug:1
 #, c-format
 msgid "Remote Control"
@@ -17327,6 +17366,14 @@ msgstr "Бу компютернинг номи рўйхатда аллақачо
 msgid ", USB printer"
 msgstr ", USB принтер"
 
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid ""
+"Unable to properly close mkbootdisk:\n"
+"\n"
+"<span foreground=\"Red\"><tt>%s</tt></span>"
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -18142,6 +18189,9 @@ msgstr "NFS сервери, SMB сервери, Прокси сервери, SSH
 msgid "Set of tools to read and send mail and news and to browse the Web"
 msgstr ""
 
+#~ msgid "Bad Ip"
+#~ msgstr "Нотўғри IP"
+
 #~ msgid "LiLo and Bootsplash themes installation successfull"
 #~ msgstr "LiLo ва Bootsplash мавзуларини ўрнатиш муваффақиятли тугади"