metter arch

1 files changed, 157 insertions, 121 deletions

diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
index 4fc947206..f76e0733c 100644
--- a/perl-install/share/po/no.po
+++ b/perl-install/share/po/no.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: panoramix VERSION\n"
-"POT-Creation-Date: 1999-09-04 16:55+0200\n"
+"POT-Creation-Date: 1999-09-04 19:36+0200\n"
 "PO-Revision-Date: 1999-08-25 11:07+0200\n"
 "Last-Translator: Terje Bjerkelia <terje@bjerkelia.com>\n"
 "Language-Team: norwegian\n"
@@ -64,8 +64,8 @@ msgstr "En feil oppsto, prøv å endre noen parametere"
 msgid "Automatic resolutions"
 msgstr "Automatiske oppløsninger"
 
-#: ../Xconfigurator.pm_.c:333 ../install_steps_interactive.pm_.c:281
-#: ../install_steps_interactive.pm_.c:282
+#: ../Xconfigurator.pm_.c:333 ../install_steps_interactive.pm_.c:295
+#: ../install_steps_interactive.pm_.c:296
 msgid "Resolution"
 msgstr "Oppløsning"
 
@@ -515,8 +515,8 @@ msgstr "Les nøye!"
 msgid "all data on this partition will be lost"
 msgstr "alle data på denne partisjonen vil gå tapt"
 
-#: ../diskdrake.pm_.c:136 ../install2.pm_.c:377 ../install_steps.pm_.c:72
-#: ../install_steps_interactive.pm_.c:26
+#: ../diskdrake.pm_.c:136 ../install2.pm_.c:383 ../install_steps.pm_.c:76
+#: ../install_steps_interactive.pm_.c:32
 msgid "Error"
 msgstr "Feil"
 
@@ -756,15 +756,15 @@ msgstr "Det finnes allerede en partisjon med monteringspunkt %s"
 msgid "Error opening %s for writing: %s"
 msgstr "Feil ved åpning av %s for skriving: %s"
 
-#: ../install2.pm_.c:37
+#: ../install2.pm_.c:35
 msgid "Choose preferred language for install and system usage."
 msgstr ""
 
-#: ../install2.pm_.c:40
+#: ../install2.pm_.c:38
 msgid "Choose on the list of keyboards, the one corresponding to yours"
 msgstr ""
 
-#: ../install2.pm_.c:43
+#: ../install2.pm_.c:41
 #, fuzzy
 msgid ""
 "Choose \"Installation\" if there are no previous versions of Linux\n"
@@ -781,7 +781,7 @@ msgstr ""
 "(Venice), 5.2 (Leeloo), 5.3 (Festen) eller\n"
 " 6.0 (Venus)."
 
-#: ../install2.pm_.c:50
+#: ../install2.pm_.c:48
 msgid ""
 "Select:\n"
 "  - Beginner: If you have not installed Linux before, or wish to install\n"
@@ -808,7 +808,7 @@ msgstr ""
 "opprettholde\n"
 "kontrollen over installasjonen så er dette valget for deg."
 
-#: ../install2.pm_.c:63
+#: ../install2.pm_.c:61
 #, fuzzy
 msgid ""
 "The system did not detect a SCSI card. If you have one (or several)\n"
@@ -831,7 +831,7 @@ msgstr ""
 "under \"System\"\n"
 " i \"Kontrollpanelet\"."
 
-#: ../install2.pm_.c:73
+#: ../install2.pm_.c:71
 msgid ""
 "At this point, hard drive partitions must be defined. (Unless you\n"
 "are overwriting a previous install of Linux and have already defined\n"
@@ -846,7 +846,7 @@ msgid ""
 "be. Consult the documentation and take your time before proceeding."
 msgstr ""
 
-#: ../install2.pm_.c:86
+#: ../install2.pm_.c:84
 msgid ""
 "Any partitions that have been newly defined must be formatted for\n"
 "use. At this time, you may wish to re-format some pre-existing\n"
@@ -861,7 +861,7 @@ msgstr ""
 "hvis de inneholder data som\n"
 "du ønsker å beholde (typiske tilfeller: / home and / usr/local)."
 
-#: ../install2.pm_.c:93
+#: ../install2.pm_.c:91
 msgid ""
 "You may now select the packages you wish to install.\n"
 "\n"
@@ -888,7 +888,7 @@ msgstr ""
 "sone \"Infos\"\n"
 "funnet over knappene til bekreftelse/valg/fjern valg."
 
-#: ../install2.pm_.c:106
+#: ../install2.pm_.c:104
 msgid ""
 "The packages selected are now being installed. This operation\n"
 "should only take a few minutes."
@@ -896,13 +896,13 @@ msgstr ""
 "Pakkene som er valgt blir nå installert på systemet ditt. Dette tar bare "
 "noen få minutter."
 
-#: ../install2.pm_.c:110 ../install2.pm_.c:113 ../install2.pm_.c:116
-#: ../install2.pm_.c:119 ../install2.pm_.c:122 ../install2.pm_.c:154
-#: ../install2.pm_.c:169 ../install2.pm_.c:201
+#: ../install2.pm_.c:108 ../install2.pm_.c:111 ../install2.pm_.c:114
+#: ../install2.pm_.c:117 ../install2.pm_.c:120 ../install2.pm_.c:152
+#: ../install2.pm_.c:167 ../install2.pm_.c:199
 msgid "Help"
 msgstr "Hjelp"
 
-#: ../install2.pm_.c:125
+#: ../install2.pm_.c:123
 msgid ""
 "An administrator password for your Linux system must now be\n"
 "assigned. The password must be entered twice to verify that both\n"
@@ -921,7 +921,7 @@ msgid ""
 "\"password\", type the password that was created here."
 msgstr ""
 
-#: ../install2.pm_.c:142
+#: ../install2.pm_.c:140
 msgid ""
 "You can now authorize one or more people to use your Linux\n"
 "system. Each user account will have their own customizable environment.\n"
@@ -935,7 +935,7 @@ msgid ""
 "accomplished from a regular user account."
 msgstr ""
 
-#: ../install2.pm_.c:157
+#: ../install2.pm_.c:155
 #, fuzzy
 msgid ""
 "You need to indicate where you wish\n"
@@ -949,7 +949,7 @@ msgstr ""
 "Med mindre du vet akkurat hva du gjør, velg alltid \"Første sektor av "
 "disken\"."
 
-#: ../install2.pm_.c:164
+#: ../install2.pm_.c:162
 msgid ""
 "It is now time to configure the video card and monitor\n"
 "configuration for the X windows Graphic User Interface (GUI). First\n"
@@ -957,103 +957,103 @@ msgid ""
 "your selections if necessary."
 msgstr ""
 
-#: ../install2.pm_.c:175
+#: ../install2.pm_.c:173
 msgid "Choose your language"
 msgstr "Velg språk"
 
-#: ../install2.pm_.c:176
+#: ../install2.pm_.c:174
 msgid "Choose install or upgrade"
 msgstr "Velg installering eller oppgradering"
 
-#: ../install2.pm_.c:177
+#: ../install2.pm_.c:175
 msgid "Select installation class"
 msgstr "Velg installasjonsklasse"
 
-#: ../install2.pm_.c:178
+#: ../install2.pm_.c:176
 #, fuzzy
 msgid "Choose your keyboard"
 msgstr "Velg språk"
 
-#: ../install2.pm_.c:179
+#: ../install2.pm_.c:177
 msgid "Setup SCSI"
 msgstr "Oppsett SCSI"
 
-#: ../install2.pm_.c:180
+#: ../install2.pm_.c:178
 msgid "Setup filesystems"
 msgstr "Oppsett filsystemer"
 
-#: ../install2.pm_.c:181
+#: ../install2.pm_.c:179
 msgid "Format partitions"
 msgstr "Formater partisjoner"
 
-#: ../install2.pm_.c:182
+#: ../install2.pm_.c:180
 msgid "Choose packages to install"
 msgstr "Velg pakker for installering"
 
-#: ../install2.pm_.c:183
+#: ../install2.pm_.c:181
 msgid "Install system"
 msgstr "Installer systemet"
 
-#: ../install2.pm_.c:184
+#: ../install2.pm_.c:182
 #, fuzzy
 msgid "Configure mouse"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:185
+#: ../install2.pm_.c:183
 msgid "Configure networking"
 msgstr "Konfigurer nettverk"
 
-#: ../install2.pm_.c:186
+#: ../install2.pm_.c:184
 #, fuzzy
 msgid "Configure timezone"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:188
+#: ../install2.pm_.c:186
 #, fuzzy
 msgid "Configure printer"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:189 ../install_steps_graphical.pm_.c:444
+#: ../install2.pm_.c:187 ../install_steps_graphical.pm_.c:444
 msgid "Set root password"
 msgstr "Sett root passord"
 
-#: ../install2.pm_.c:190
+#: ../install2.pm_.c:188
 msgid "Add a user"
 msgstr "Legg til en bruker"
 
-#: ../install2.pm_.c:191
+#: ../install2.pm_.c:189
 msgid "Create bootdisk"
 msgstr "Opprett oppstartdiskett"
 
-#: ../install2.pm_.c:192
+#: ../install2.pm_.c:190
 msgid "Install bootloader"
 msgstr "Installer oppstartslaster"
 
-#: ../install2.pm_.c:193
+#: ../install2.pm_.c:191
 msgid "Configure X"
 msgstr "Konfigurer X"
 
-#: ../install2.pm_.c:194
+#: ../install2.pm_.c:192
 msgid "Exit install"
 msgstr "Gå ut av installering"
 
-#: ../install2.pm_.c:226
+#: ../install2.pm_.c:224
 msgid "beginner"
 msgstr "nybegynner"
 
-#: ../install2.pm_.c:226
+#: ../install2.pm_.c:224
 msgid "developer"
 msgstr "utvikler"
 
-#: ../install2.pm_.c:226
+#: ../install2.pm_.c:224
 msgid "expert"
 msgstr "ekspert"
 
-#: ../install2.pm_.c:226
+#: ../install2.pm_.c:224
 msgid "server"
 msgstr "tjener"
 
-#: ../install2.pm_.c:387
+#: ../install2.pm_.c:393
 msgid ""
 "An error has occurred - no valid devices were found on which to create new "
 "filesystems. Please check your hardware for the cause of this problem"
@@ -1061,11 +1061,11 @@ msgstr ""
 "En feil har oppstått - ingen gyldige enheter ble funnet for å opprette nye "
 "filsystemer. Vennligst sjekk maskinvaren din for årsaken til dette problemet"
 
-#: ../install2.pm_.c:402
+#: ../install2.pm_.c:408
 msgid "partitioning failed: no root filesystem"
 msgstr "partisjonering feilet: intet root filsystem"
 
-#: ../install_steps.pm_.c:257
+#: ../install_steps.pm_.c:273
 msgid "no floppy available"
 msgstr ""
 
@@ -1212,157 +1212,157 @@ msgid ""
 "The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "Brukernavnet kan kun inneholde bokstaver, tall, `-' og `_'"
 
-#: ../install_steps_interactive.pm_.c:26
+#: ../install_steps_interactive.pm_.c:32
 msgid "An error occurred"
 msgstr "En feil oppsto"
 
-#: ../install_steps_interactive.pm_.c:33
+#: ../install_steps_interactive.pm_.c:44
 msgid "Which language do you want?"
 msgstr "Hvilket språk ønsker du?"
 
-#: ../install_steps_interactive.pm_.c:41
+#: ../install_steps_interactive.pm_.c:55
 #, fuzzy
 msgid "Which keyboard do you have?"
 msgstr "Hvilken sektor vil du flytte til?"
 
-#: ../install_steps_interactive.pm_.c:48
+#: ../install_steps_interactive.pm_.c:64
 msgid "Install/Upgrade"
 msgstr "Installer/Oppgrader"
 
-#: ../install_steps_interactive.pm_.c:49
+#: ../install_steps_interactive.pm_.c:65
 #, fuzzy
 msgid "Is this an install or an upgrade?"
 msgstr "Er det en installasjon eller en oppgradering?"
 
-#: ../install_steps_interactive.pm_.c:50
+#: ../install_steps_interactive.pm_.c:66
 msgid "Install"
 msgstr "Installer"
 
-#: ../install_steps_interactive.pm_.c:50
+#: ../install_steps_interactive.pm_.c:66
 msgid "Upgrade"
 msgstr "Oppgrader"
 
-#: ../install_steps_interactive.pm_.c:56
+#: ../install_steps_interactive.pm_.c:74
 msgid "Install Class"
 msgstr "Installeringsklasse"
 
-#: ../install_steps_interactive.pm_.c:57
+#: ../install_steps_interactive.pm_.c:75
 msgid "What type of user will you have?"
 msgstr "Hva slags brukertype vil du ha?"
 
-#: ../install_steps_interactive.pm_.c:65
+#: ../install_steps_interactive.pm_.c:85
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr ""
 "Du må starte maskinen på nytt for at modifiseringene av partisjonstabellen "
 "skal tre i kraft"
 
-#: ../install_steps_interactive.pm_.c:75
+#: ../install_steps_interactive.pm_.c:97
 msgid "Choose the partitions you want to format"
 msgstr "Velg de partisjonene du ønsker å formatere"
 
-#: ../install_steps_interactive.pm_.c:86
+#: ../install_steps_interactive.pm_.c:108
 #, c-format
 msgid "Formatting partition %s"
 msgstr "Formaterer partisjon %s"
 
-#: ../install_steps_interactive.pm_.c:99
+#: ../install_steps_interactive.pm_.c:121
 msgid "Keep the current IP configuration"
 msgstr "Behold nåværende IP-konfigurasjon"
 
-#: ../install_steps_interactive.pm_.c:100
+#: ../install_steps_interactive.pm_.c:122
 msgid "Reconfigure network now"
 msgstr "Rekonfigurer nettverket nå"
 
-#: ../install_steps_interactive.pm_.c:101
+#: ../install_steps_interactive.pm_.c:123
 msgid "Don't set up networking"
 msgstr "Ikke sett opp nettverk"
 
-#: ../install_steps_interactive.pm_.c:103
-#: ../install_steps_interactive.pm_.c:109
+#: ../install_steps_interactive.pm_.c:125
+#: ../install_steps_interactive.pm_.c:131
 msgid "Network Configuration"
 msgstr "Nettverks-konfigurasjon"
 
-#: ../install_steps_interactive.pm_.c:104
+#: ../install_steps_interactive.pm_.c:126
 msgid "LAN networking has already been configured. Do you want to:"
 msgstr "LAN nettverket har allerede blitt konfigurert. Vil du:"
 
-#: ../install_steps_interactive.pm_.c:110
+#: ../install_steps_interactive.pm_.c:132
 msgid ""
 "Do you want to configure LAN (not dialup) networking for your installed "
 "system?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:163
+#: ../install_steps_interactive.pm_.c:177
 msgid "Standard Printer Options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:164
+#: ../install_steps_interactive.pm_.c:178
 msgid ""
 "Every print queue (which print jobs are directed to) needs a \n"
 "\t\t\t   name (often lp) and a spool directory associated with it. What \n"
 "\t\t\t   name and directory should be used for this queue?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:167
+#: ../install_steps_interactive.pm_.c:181
 msgid "Name of queue:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:167
+#: ../install_steps_interactive.pm_.c:181
 msgid "Spool directory:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:178
+#: ../install_steps_interactive.pm_.c:192
 msgid "Select Printer Connection"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:179
+#: ../install_steps_interactive.pm_.c:193
 msgid "How is the printer connected?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:194
+#: ../install_steps_interactive.pm_.c:208
 msgid ""
 "What device is your printer connected to \n"
 "(note that /dev/lp0 is equivalent to LPT1:)?\n"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:196
+#: ../install_steps_interactive.pm_.c:210
 msgid "I detect :"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:202
+#: ../install_steps_interactive.pm_.c:214
 msgid "Local Printer Device"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:204
+#: ../install_steps_interactive.pm_.c:216
 #, fuzzy
 msgid "Printer Device:"
 msgstr "Enhet: "
 
-#: ../install_steps_interactive.pm_.c:210
+#: ../install_steps_interactive.pm_.c:222
 msgid "Remote lpd Printer Options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:211
+#: ../install_steps_interactive.pm_.c:223
 msgid ""
 "To use a remote lpd print queue, you need to supply \n"
 "the hostname of the printer server and the queue name \n"
 "on that server which jobs should be placed in."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:214
+#: ../install_steps_interactive.pm_.c:226
 #, fuzzy
 msgid "Remote hostname:"
 msgstr "Brukernavn"
 
-#: ../install_steps_interactive.pm_.c:214
+#: ../install_steps_interactive.pm_.c:226
 msgid "Remote queue:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:219
+#: ../install_steps_interactive.pm_.c:231
 msgid "SMB/Windows 95/NT Printer Options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:220
+#: ../install_steps_interactive.pm_.c:232
 msgid ""
 "To print to a SMB printer, you need to provide the \n"
 "SMB host name (this is not always the same as the machines \n"
@@ -1371,42 +1371,42 @@ msgid ""
 "applicable user name, password, and workgroup information."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:225
+#: ../install_steps_interactive.pm_.c:237
 #, fuzzy
 msgid "SMB server IP:"
 msgstr "tjener"
 
-#: ../install_steps_interactive.pm_.c:225
+#: ../install_steps_interactive.pm_.c:237
 #, fuzzy
 msgid "SMB server host:"
 msgstr "tjener"
 
-#: ../install_steps_interactive.pm_.c:226
-#: ../install_steps_interactive.pm_.c:240
+#: ../install_steps_interactive.pm_.c:238
+#: ../install_steps_interactive.pm_.c:252
 #, fuzzy
 msgid "Password:"
 msgstr "Passord"
 
-#: ../install_steps_interactive.pm_.c:226
+#: ../install_steps_interactive.pm_.c:238
 #, fuzzy
 msgid "Share name:"
 msgstr "Brukernavn"
 
-#: ../install_steps_interactive.pm_.c:226
-#: ../install_steps_interactive.pm_.c:240
+#: ../install_steps_interactive.pm_.c:238
+#: ../install_steps_interactive.pm_.c:252
 #, fuzzy
 msgid "User name:"
 msgstr "Brukernavn"
 
-#: ../install_steps_interactive.pm_.c:227
+#: ../install_steps_interactive.pm_.c:239
 msgid "Workgroup:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:234
+#: ../install_steps_interactive.pm_.c:246
 msgid "NetWare Printer Options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:235
+#: ../install_steps_interactive.pm_.c:247
 msgid ""
 "To print to a NetWare printer, you need to provide the \n"
 "NetWare print server name (this is not always the same as the machines \n"
@@ -1414,56 +1414,56 @@ msgid ""
 "wish to access and any applicable user name and password."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:239
+#: ../install_steps_interactive.pm_.c:251
 msgid "Print Queue Name:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:239
+#: ../install_steps_interactive.pm_.c:251
 msgid "Printer Server:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:259
+#: ../install_steps_interactive.pm_.c:273
 #, fuzzy
 msgid "Configure Printer"
 msgstr "Konfigurer X"
 
-#: ../install_steps_interactive.pm_.c:260
+#: ../install_steps_interactive.pm_.c:274
 #, fuzzy
 msgid "What type of printer do you have?"
 msgstr "Hva slags brukertype vil du ha?"
 
-#: ../install_steps_interactive.pm_.c:271
-#: ../install_steps_interactive.pm_.c:272
+#: ../install_steps_interactive.pm_.c:285
+#: ../install_steps_interactive.pm_.c:286
 msgid "Paper Size"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:295
+#: ../install_steps_interactive.pm_.c:305
 msgid "CRLF"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:296
+#: ../install_steps_interactive.pm_.c:306
 msgid "Fix stair-stepping of text?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:310
+#: ../install_steps_interactive.pm_.c:321
 #, fuzzy
 msgid "Configure Uniprint Driver"
 msgstr "Konfigurer X"
 
-#: ../install_steps_interactive.pm_.c:311
+#: ../install_steps_interactive.pm_.c:322
 msgid "You may now configure the uniprint options for this printer."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:319
+#: ../install_steps_interactive.pm_.c:330
 #, fuzzy
 msgid "Configure Color Depth"
 msgstr "Konfigurer X"
 
-#: ../install_steps_interactive.pm_.c:320
+#: ../install_steps_interactive.pm_.c:331
 msgid "You may now configure the color options for this printer."
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:339
+#: ../install_steps_interactive.pm_.c:351
 msgid ""
 "A custom bootdisk provides a way of booting into your Linux system without\n"
 "depending on the normal bootloader. This is useful if you don't want to "
@@ -1477,75 +1477,111 @@ msgid ""
 "failures. Would you like to create a bootdisk for your system?"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:348
+#: ../install_steps_interactive.pm_.c:359
 msgid "Sorry, no floppy drive available"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:355
+#: ../install_steps_interactive.pm_.c:362
+#, fuzzy
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "Velg de partisjonene du ønsker å formatere"
+
+#: ../install_steps_interactive.pm_.c:366
 #, c-format
 msgid "Insert a floppy in drive %s"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:356
+#: ../install_steps_interactive.pm_.c:367
 #, fuzzy
 msgid "Creating bootdisk"
 msgstr "Opprett oppstartdiskett"
 
-#: ../install_steps_interactive.pm_.c:362
+#: ../install_steps_interactive.pm_.c:373
 msgid "First sector of boot partition"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:362
+#: ../install_steps_interactive.pm_.c:373
 msgid "First sector of drive"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:365
+#: ../install_steps_interactive.pm_.c:376
 #, fuzzy
 msgid "Lilo Installation"
 msgstr "Installerer"
 
-#: ../install_steps_interactive.pm_.c:366
+#: ../install_steps_interactive.pm_.c:377
 #, fuzzy
 msgid "Where do you want to install the bootloader?"
 msgstr "Hvor vil du montere %s enheten?"
 
-#: ../install_steps_interactive.pm_.c:389
+#: ../install_steps_interactive.pm_.c:387
+msgid ""
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"For information on fixes which are available for this release of Linux "
+"Mandrake,\n"
+"consult the Errata available from http://www.linux-mandrake.com/.\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Linux Mandrake User's Guide."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:400
 #, fuzzy, c-format
 msgid "What %s card have you?"
 msgstr "Hva slags scsi-kort har du?"
 
-#: ../install_steps_interactive.pm_.c:398
+#: ../install_steps_interactive.pm_.c:404
+#, c-format
+msgid ""
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:409
 msgid "Autoprobe"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:398
+#: ../install_steps_interactive.pm_.c:409
 msgid "Specify options"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:404
+#: ../install_steps_interactive.pm_.c:412
+#, c-format
+msgid ""
+"Here must give the different options for the module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For example you can have ``io=0x300 irq=7''"
+msgstr ""
+
+#: ../install_steps_interactive.pm_.c:415
 msgid "Module options:"
 msgstr ""
 
-#: ../install_steps_interactive.pm_.c:416
+#: ../install_steps_interactive.pm_.c:427
 #, fuzzy, c-format
 msgid "Installing driver for %s card %s"
 msgstr "Installerer driver for scsi-kort %s"
 
-#: ../install_steps_interactive.pm_.c:417
+#: ../install_steps_interactive.pm_.c:428
 #, c-format
 msgid "(module %s)"
 msgstr "(modul %s)"
 
-#: ../install_steps_interactive.pm_.c:430
+#: ../install_steps_interactive.pm_.c:441
 #, fuzzy, c-format
 msgid "Found %s %s interfaces"
 msgstr " scsi grensesnitt"
 
-#: ../install_steps_interactive.pm_.c:431
+#: ../install_steps_interactive.pm_.c:442
 msgid "Do you have another one?"
 msgstr "Har du enda ett?"
 
-#: ../install_steps_interactive.pm_.c:432
+#: ../install_steps_interactive.pm_.c:443
 #, fuzzy, c-format
 msgid "Do you have an %s interface?"
 msgstr "Har du et scsi grensesnitt"