Updated POT file

1 files changed, 339 insertions, 334 deletions

diff --git a/perl-install/share/po/zh_TW.po b/perl-install/share/po/zh_TW.po
index 39fdcdb35..dfe871150 100644
--- a/perl-install/share/po/zh_TW.po
+++ b/perl-install/share/po/zh_TW.po
@@ -18,7 +18,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2007-03-21 12:10+0100\n"
+"POT-Creation-Date: 2007-07-01 08:35+0200\n"
 "PO-Revision-Date: 2006-09-23 12:29+0800\n"
 "Last-Translator: Shiva Huang <shivahuang@gmail.com>\n"
 "Language-Team: Traditional Chinese <zh@li.org>\n"
@@ -29,20 +29,20 @@ msgstr ""
 "X-Poedit-Language: Chinese\n"
 "X-Poedit-Country: TAIWAN\n"
 
-#: any.pm:157 diskdrake/interactive.pm:422 diskdrake/interactive.pm:617
-#: diskdrake/interactive.pm:798 diskdrake/interactive.pm:842
-#: diskdrake/interactive.pm:904 diskdrake/interactive.pm:1188 do_pkgs.pm:209
-#: do_pkgs.pm:255 harddrake/sound.pm:195 interactive.pm:576
+#: any.pm:240 diskdrake/interactive.pm:422 diskdrake/interactive.pm:621
+#: diskdrake/interactive.pm:811 diskdrake/interactive.pm:855
+#: diskdrake/interactive.pm:917 diskdrake/interactive.pm:1201 do_pkgs.pm:209
+#: do_pkgs.pm:255 harddrake/sound.pm:201 interactive.pm:576
 #, c-format
 msgid "Please wait"
 msgstr "請稍候"
 
-#: any.pm:157
+#: any.pm:240
 #, c-format
 msgid "Bootloader installation in progress"
 msgstr "開機載入程式安裝中"
 
-#: any.pm:168
+#: any.pm:251
 #, c-format
 msgid ""
 "LILO wants to assign a new Volume ID to drive %s.  However, changing\n"
@@ -58,12 +58,12 @@ msgstr ""
 "\n"
 "要分配一個新的磁區標籤？"
 
-#: any.pm:179
+#: any.pm:262
 #, c-format
 msgid "Installation of bootloader failed. The following error occurred:"
 msgstr "開機程式安裝失敗，發生如下之錯誤："
 
-#: any.pm:185
+#: any.pm:268
 #, c-format
 msgid ""
 "You may need to change your Open Firmware boot-device to\n"
@@ -80,7 +80,7 @@ msgstr ""
 "然後再輸入：shut-down\n"
 "然後您下一次開機時應該就可以看到開機啟動程式的訊息了。"
 
-#: any.pm:223
+#: any.pm:306
 #, c-format
 msgid ""
 "You decided to install the bootloader on a partition.\n"
@@ -95,268 +95,268 @@ msgstr ""
 "\n"
 "您目前是用那顆硬碟開機呢？"
 
-#: any.pm:246
+#: any.pm:329
 #, c-format
 msgid "First sector of drive (MBR)"
 msgstr "硬碟的第一個扇區 (MBR)"
 
-#: any.pm:247
+#: any.pm:330
 #, c-format
 msgid "First sector of the root partition"
 msgstr "根分割區的第一扇區"
 
-#: any.pm:249
+#: any.pm:332
 #, c-format
 msgid "On Floppy"
 msgstr "在軟碟機"
 
-#: any.pm:251
+#: any.pm:334
 #, c-format
 msgid "Skip"
 msgstr "略過"
 
-#: any.pm:255
+#: any.pm:338
 #, c-format
 msgid "LILO/grub Installation"
 msgstr "LILO/GRUB 安裝"
 
-#: any.pm:257
+#: any.pm:340
 #, c-format
 msgid "Where do you want to install the bootloader?"
 msgstr "您要將開機載入程式安裝在那裡？"
 
-#: any.pm:284
+#: any.pm:367
 #, c-format
 msgid "Boot Style Configuration"
 msgstr "開機樣式組態設定"
 
-#: any.pm:294 any.pm:326 any.pm:327
+#: any.pm:377 any.pm:409 any.pm:410
 #, c-format
 msgid "Bootloader main options"
 msgstr "開機載入程式主要選項"
 
-#: any.pm:299
+#: any.pm:382
 #, c-format
 msgid "Bootloader"
 msgstr "開機載入器"
 
-#: any.pm:300 any.pm:331
+#: any.pm:383 any.pm:414
 #, c-format
 msgid "Bootloader to use"
 msgstr "要用的開機載入程式"
 
-#: any.pm:302 any.pm:333
+#: any.pm:385 any.pm:416
 #, c-format
 msgid "Boot device"
 msgstr "開機裝置"
 
-#: any.pm:304
+#: any.pm:387
 #, c-format
 msgid "Main options"
 msgstr "主要選項"
 
-#: any.pm:305
+#: any.pm:388
 #, c-format
 msgid "Delay before booting default image"
 msgstr "以預設的核心影像開機之前等待的時間"
 
-#: any.pm:306
+#: any.pm:389
 #, c-format
 msgid "Enable ACPI"
 msgstr "啟用 ACPI"
 
-#: any.pm:307
+#: any.pm:390
 #, c-format
 msgid "Enable APIC"
 msgstr "啟用 APIC"
 
-#: any.pm:308
+#: any.pm:391
 #, c-format
 msgid "Enable Local APIC"
 msgstr "啟用本地 APIC"
 
-#: any.pm:310 any.pm:686 authentication.pm:196 diskdrake/smbnfs_gtk.pm:181
+#: any.pm:393 any.pm:773 authentication.pm:196 diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
 msgstr "密碼"
 
-#: any.pm:312 authentication.pm:207
+#: any.pm:395 authentication.pm:207
 #, c-format
 msgid "The passwords do not match"
 msgstr "密碼不符合"
 
-#: any.pm:312 authentication.pm:207 diskdrake/interactive.pm:1348
+#: any.pm:395 authentication.pm:207 diskdrake/interactive.pm:1361
 #, c-format
 msgid "Please try again"
 msgstr "請再試一次"
 
-#: any.pm:313
+#: any.pm:396
 #, fuzzy, c-format
 msgid "You can not use a password with %s"
 msgstr "您不能使用加密過的檔案系統來作為 %s 的掛載點"
 
-#: any.pm:316 any.pm:687 authentication.pm:197
+#: any.pm:399 any.pm:774 authentication.pm:197
 #, c-format
 msgid "Password (again)"
 msgstr "密碼 (再一次)"
 
-#: any.pm:317
+#: any.pm:400
 #, c-format
 msgid "Restrict command line options"
 msgstr "限制命令列選項"
 
-#: any.pm:317
+#: any.pm:400
 #, c-format
 msgid "restrict"
 msgstr "限制"
 
-#: any.pm:318
+#: any.pm:401
 #, c-format
 msgid ""
 "Option ``Restrict command line options'' is of no use without a password"
 msgstr "選項 ``限制命令列選項'' 在沒有設定密碼的情況下會無法使用"
 
-#: any.pm:320
+#: any.pm:403
 #, c-format
 msgid "Clean /tmp at each boot"
 msgstr "每次開機時清理 /tmp"
 
-#: any.pm:321
+#: any.pm:404
 #, c-format
 msgid "Precise RAM size if needed (found %d MB)"
 msgstr "若有需要的話，請輸入正確的記憶體大小 (找到 %d MB)"
 
-#: any.pm:322
+#: any.pm:405
 #, c-format
 msgid "Give the ram size in MB"
 msgstr "輸入記憶體大小 (以 MB 為單位)"
 
-#: any.pm:332
+#: any.pm:415
 #, c-format
 msgid "Init Message"
 msgstr "啟動訊息"
 
-#: any.pm:334
+#: any.pm:417
 #, c-format
 msgid "Open Firmware Delay"
 msgstr "Open Firmware 延遲"
 
-#: any.pm:335
+#: any.pm:418
 #, c-format
 msgid "Kernel Boot Timeout"
 msgstr "核心啟動時間逾時"
 
-#: any.pm:336
+#: any.pm:419
 #, c-format
 msgid "Enable CD Boot?"
 msgstr "允許光碟開機？"
 
-#: any.pm:337
+#: any.pm:420
 #, c-format
 msgid "Enable OF Boot?"
 msgstr "允許 Open Firmware 開機？"
 
-#: any.pm:338
+#: any.pm:421
 #, c-format
 msgid "Default OS?"
 msgstr "預設的作業系統？"
 
-#: any.pm:404
+#: any.pm:487
 #, c-format
 msgid "Image"
 msgstr "核心影像"
 
-#: any.pm:405 any.pm:418
+#: any.pm:488 any.pm:501
 #, c-format
 msgid "Root"
 msgstr "根目錄"
 
-#: any.pm:406 any.pm:431
+#: any.pm:489 any.pm:514
 #, c-format
 msgid "Append"
 msgstr "附加參數"
 
-#: any.pm:408
+#: any.pm:491
 #, c-format
 msgid "Xen append"
 msgstr "Xen 附加參數"
 
-#: any.pm:411
+#: any.pm:494
 #, c-format
 msgid "Video mode"
 msgstr "顯示模式"
 
-#: any.pm:413
+#: any.pm:496
 #, c-format
 msgid "Initrd"
 msgstr "Initrd"
 
-#: any.pm:414
+#: any.pm:497
 #, c-format
 msgid "Network profile"
 msgstr "網路 profile"
 
-#: any.pm:423 any.pm:428 any.pm:430 diskdrake/interactive.pm:443
+#: any.pm:506 any.pm:511 any.pm:513 diskdrake/interactive.pm:443
 #, c-format
 msgid "Label"
 msgstr "標籤"
 
-#: any.pm:425 any.pm:433 harddrake/v4l.pm:438
+#: any.pm:508 any.pm:516 harddrake/v4l.pm:438
 #, c-format
 msgid "Default"
 msgstr "預設"
 
-#: any.pm:432
+#: any.pm:515
 #, c-format
 msgid "NoVideo"
 msgstr "沒有 Video 參數"
 
-#: any.pm:443
+#: any.pm:526
 #, c-format
 msgid "Empty label not allowed"
 msgstr "不允許空白標籤"
 
-#: any.pm:444
+#: any.pm:527
 #, c-format
 msgid "You must specify a kernel image"
 msgstr "您需要指定一個核心影像"
 
-#: any.pm:444
+#: any.pm:527
 #, c-format
 msgid "You must specify a root partition"
 msgstr "您需要指定一個 root 分割區"
 
-#: any.pm:445
+#: any.pm:528
 #, c-format
 msgid "This label is already used"
 msgstr "這個標籤已經被用過了"
 
-#: any.pm:459
+#: any.pm:546
 #, c-format
 msgid "Which type of entry do you want to add?"
 msgstr "您要新增哪一類的項目？"
 
-#: any.pm:460
+#: any.pm:547
 #, c-format
 msgid "Linux"
 msgstr "Linux"
 
-#: any.pm:460
+#: any.pm:547
 #, c-format
 msgid "Other OS (SunOS...)"
 msgstr "其他作業系統 (SunOS...)"
 
-#: any.pm:461
+#: any.pm:548
 #, c-format
 msgid "Other OS (MacOS...)"
 msgstr "其他作業系統 (MacOS...)"
 
-#: any.pm:461
+#: any.pm:548
 #, c-format
 msgid "Other OS (Windows...)"
 msgstr "其他作業系統 (Windows...)"
 
-#: any.pm:489
+#: any.pm:576
 #, c-format
 msgid ""
 "Here are the entries on your boot menu so far.\n"
@@ -365,88 +365,88 @@ msgstr ""
 "目前有這些選項在您的開機選單中。\n"
 "您可以建立更多的選項或修改既有的選項。"
 
-#: any.pm:640
+#: any.pm:727
 #, c-format
 msgid "access to X programs"
 msgstr "存取 X 程式"
 
-#: any.pm:641
+#: any.pm:728
 #, c-format
 msgid "access to rpm tools"
 msgstr "存取 RPM 套件工具程式"
 
-#: any.pm:642
+#: any.pm:729
 #, c-format
 msgid "allow \"su\""
 msgstr "允許 \"su\""
 
-#: any.pm:643
+#: any.pm:730
 #, c-format
 msgid "access to administrative files"
 msgstr "存取系統管理者權限的檔案"
 
-#: any.pm:644
+#: any.pm:731
 #, c-format
 msgid "access to network tools"
 msgstr "存取網路工具"
 
-#: any.pm:645
+#: any.pm:732
 #, c-format
 msgid "access to compilation tools"
 msgstr "存取編譯工具"
 
-#: any.pm:650
+#: any.pm:737
 #, c-format
 msgid "(already added %s)"
 msgstr "( %s 已經加入)"
 
-#: any.pm:657
+#: any.pm:744
 #, c-format
 msgid "Please give a user name"
 msgstr "請輸入使用者名稱"
 
-#: any.pm:658
+#: any.pm:745
 #, c-format
 msgid ""
 "The user name must contain only lower cased letters, numbers, `-' and `_'"
 msgstr "使用者名稱只能含有小寫英文字母、數字、`-' 與 `_'"
 
-#: any.pm:659
+#: any.pm:746
 #, c-format
 msgid "The user name is too long"
 msgstr "這個使用者名稱太長了"
 
-#: any.pm:660
+#: any.pm:747
 #, c-format
 msgid "This user name has already been added"
 msgstr "這個使用者已經加入過了"
 
-#: any.pm:661 any.pm:689
+#: any.pm:748 any.pm:776
 #, c-format
 msgid "User ID"
 msgstr "使用者 ID"
 
-#: any.pm:662 any.pm:690
+#: any.pm:749 any.pm:777
 #, c-format
 msgid "Group ID"
 msgstr "群組 ID"
 
-#: any.pm:665
+#: any.pm:752
 #, c-format
 msgid "%s must be a number"
 msgstr "%s 必須是數字"
 
-#: any.pm:666
+#: any.pm:753
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s 必須大於 500。還是要接受嗎？"
 
-#: any.pm:671
+#: any.pm:758
 #, c-format
 msgid "Add user"
 msgstr "新增使用者"
 
-#: any.pm:673
+#: any.pm:760
 #, c-format
 msgid ""
 "Enter a user\n"
@@ -455,94 +455,94 @@ msgstr ""
 "輸入一位使用者\n"
 "%s"
 
-#: any.pm:676 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:166
+#: any.pm:763 diskdrake/dav.pm:66 diskdrake/hd_gtk.pm:166
 #: diskdrake/removable.pm:26 diskdrake/smbnfs_gtk.pm:82
 #: interactive/http.pm:151
 #, c-format
 msgid "Done"
 msgstr "完成"
 
-#: any.pm:677
+#: any.pm:764
 #, c-format
 msgid "Accept user"
 msgstr "接受使用者"
 
-#: any.pm:682
+#: any.pm:769
 #, c-format
 msgid "Real name"
 msgstr "真實名稱"
 
-#: any.pm:685
+#: any.pm:772
 #, c-format
 msgid "Login name"
 msgstr "登入名稱"
 
-#: any.pm:688
+#: any.pm:775
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:735 security/l10n.pm:14
+#: any.pm:822 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自動登入"
 
-#: any.pm:736
+#: any.pm:823
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "我能夠設定您的電腦自動以某個使用者身份登入系統。"
 
-#: any.pm:737
+#: any.pm:824
 #, c-format
 msgid "Use this feature"
 msgstr "使用此功能"
 
-#: any.pm:738
+#: any.pm:825
 #, c-format
 msgid "Choose the default user:"
 msgstr "選取預設的使用者："
 
-#: any.pm:739
+#: any.pm:826
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "選取您想使用的視窗管理程式："
 
-#: any.pm:767
+#: any.pm:854
 #, c-format
 msgid "License agreement"
 msgstr "版權協議"
 
-#: any.pm:770 diskdrake/dav.pm:26
+#: any.pm:857 diskdrake/dav.pm:26
 #, c-format
 msgid "Quit"
 msgstr "離開"
 
-#: any.pm:773
+#: any.pm:860
 #, c-format
 msgid "Release Notes"
 msgstr "發行紀錄"
 
-#: any.pm:776
+#: any.pm:863
 #, c-format
 msgid "Accept"
 msgstr "接受"
 
-#: any.pm:776
+#: any.pm:863
 #, c-format
 msgid "Refuse"
 msgstr "拒絕"
 
-#: any.pm:795 any.pm:863
+#: any.pm:882 any.pm:950
 #, c-format
 msgid "Please choose a language to use."
 msgstr "請選擇要使用那個語言。"
 
-#: any.pm:796 any.pm:864
+#: any.pm:883 any.pm:951
 #, c-format
 msgid "Language choice"
 msgstr "語言選擇"
 
-#: any.pm:826
+#: any.pm:913
 #, c-format
 msgid ""
 "Mandriva Linux can support multiple languages. Select\n"
@@ -552,72 +552,72 @@ msgstr ""
 "Mandriva Linux 能支援多種語言，請選擇您想安裝的語言。\n"
 "它們將可供您完成安裝並重新啟動系統之後使用。"
 
-#: any.pm:829
+#: any.pm:916
 #, c-format
 msgid "Multi languages"
 msgstr "多語系"
 
-#: any.pm:841 any.pm:872
+#: any.pm:928 any.pm:959
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr "舊式相容 (非 UTF-8) 編碼"
 
-#: any.pm:843
+#: any.pm:930
 #, c-format
 msgid "All languages"
 msgstr "所有語言"
 
-#: any.pm:918
+#: any.pm:1005
 #, c-format
 msgid "Country / Region"
 msgstr "國家/地區"
 
-#: any.pm:920
+#: any.pm:1007
 #, c-format
 msgid "Please choose your country."
 msgstr "請選擇您的國家。"
 
-#: any.pm:922
+#: any.pm:1009
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "以下是全部可用的所有的國家清單"
 
-#: any.pm:923
+#: any.pm:1010
 #, c-format
 msgid "Other Countries"
 msgstr "其他國家"
 
-#: any.pm:923 interactive.pm:477
+#: any.pm:1010 interactive.pm:477
 #, c-format
 msgid "Advanced"
 msgstr "進階"
 
-#: any.pm:929
+#: any.pm:1016
 #, c-format
 msgid "Input method:"
 msgstr "輸入法："
 
-#: any.pm:932
+#: any.pm:1019
 #, c-format
 msgid "None"
 msgstr "無"
 
-#: any.pm:1012
+#: any.pm:1099
 #, c-format
 msgid "No sharing"
 msgstr "不分享"
 
-#: any.pm:1012
+#: any.pm:1099
 #, c-format
 msgid "Allow all users"
 msgstr "允許所有使用者"
 
-#: any.pm:1012
+#: any.pm:1099
 #, c-format
 msgid "Custom"
 msgstr "自訂"
 
-#: any.pm:1016
+#: any.pm:1103
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -632,37 +632,37 @@ msgstr ""
 "\n"
 "\"自訂\" 允許每一個使用者自行設定。\n"
 
-#: any.pm:1028
+#: any.pm:1115
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS：傳統的 Unix 檔案分享系統，但 Mac 與 Windows 的支援較不足。"
 
-#: any.pm:1031
+#: any.pm:1118
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB：一個 Windows、Mac OS X 與許多先進的 Linux 系統用的檔案分享系統。"
 
-#: any.pm:1039
+#: any.pm:1126
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您能夠用 NFS 或者是 SMB 匯出。請選擇您想要用那一個。"
 
-#: any.pm:1064
+#: any.pm:1151
 #, c-format
 msgid "Launch userdrake"
 msgstr "啟動 userdrake"
 
-#: any.pm:1064 interactive/gtk.pm:747
+#: any.pm:1151 interactive/gtk.pm:747
 #, c-format
 msgid "Close"
 msgstr "關閉"
 
-#: any.pm:1066
+#: any.pm:1153
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -671,52 +671,52 @@ msgstr ""
 "每個使用者的分享都是使用 \"fileshare\" 群組。\n"
 "您可以執行 userdrake 在該群組內加入使用者。"
 
-#: any.pm:1158
+#: any.pm:1245
 #, c-format
 msgid "Please log out and then use Ctrl-Alt-BackSpace"
 msgstr "請登出, 然後用 Ctrl-Alt-BackSpace 重新啟動 X"
 
-#: any.pm:1162
+#: any.pm:1249
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "您必須登出之後重新登入才能讓變動生效"
 
-#: any.pm:1212
+#: any.pm:1284
 #, c-format
 msgid "Timezone"
 msgstr "時區"
 
-#: any.pm:1212
+#: any.pm:1284
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您的時區為何？"
 
-#: any.pm:1224 any.pm:1226
+#: any.pm:1296 any.pm:1298
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr "日期、時間與時區設定"
 
-#: any.pm:1227
+#: any.pm:1299
 #, c-format
 msgid "What is the best time?"
 msgstr "最佳的時間是哪一個？"
 
-#: any.pm:1231
+#: any.pm:1303
 #, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "%s (硬體時鐘設定為 UTC 時間)"
 
-#: any.pm:1232
+#: any.pm:1304
 #, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "%s (硬體時鐘設定為本地時間)"
 
-#: any.pm:1234
+#: any.pm:1306
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 伺服器"
 
-#: any.pm:1235
+#: any.pm:1307
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自動時間同步 (使用 NTP 服務)"
@@ -988,7 +988,7 @@ msgid "Can not use broadcast with no NIS domain"
 msgstr "沒有 NIS 網域無法使用廣播 (broadcast)"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:880
+#: bootloader.pm:882
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1003,101 +1003,101 @@ msgstr ""
 "wait for default boot.\n"
 "\n"
 
-#: bootloader.pm:1028
+#: bootloader.pm:1030
 #, c-format
 msgid "LILO with text menu"
 msgstr "LILO 文字介面選單"
 
-#: bootloader.pm:1029
+#: bootloader.pm:1031
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr "GRUB 圖形介面選單"
 
-#: bootloader.pm:1030
+#: bootloader.pm:1032
 #, c-format
 msgid "GRUB with text menu"
 msgstr "GRUB 文字介面選單"
 
-#: bootloader.pm:1031
+#: bootloader.pm:1033
 #, c-format
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: bootloader.pm:1032
+#: bootloader.pm:1034
 #, c-format
 msgid "SILO"
 msgstr ""
 
-#: bootloader.pm:1112
+#: bootloader.pm:1114
 #, c-format
 msgid "not enough room in /boot"
 msgstr "/boot 沒有足夠的空間"
 
-#: bootloader.pm:1679
+#: bootloader.pm:1681
 #, c-format
 msgid "You can not install the bootloader on a %s partition\n"
 msgstr "您無法把開機載入程式安裝在 %s 分割區上\n"
 
-#: bootloader.pm:1732
+#: bootloader.pm:1734
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "因為您的分割區被重新編號過，所以開機載入程式的設定必須更新"
 
-#: bootloader.pm:1745
+#: bootloader.pm:1747
 #, c-format
 msgid ""
 "The bootloader can not be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "開機載入程式無法正確安裝。您必須以 rescue 開機並選擇 \"%s\""
 
-#: bootloader.pm:1746
+#: bootloader.pm:1748
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安裝開機載入程式"
 
-#: common.pm:129
+#: common.pm:132
 #, c-format
 msgid "B"
 msgstr "B"
 
-#: common.pm:129
+#: common.pm:132
 #, c-format
 msgid "KB"
 msgstr "KB"
 
-#: common.pm:129
+#: common.pm:132
 #, c-format
 msgid "MB"
 msgstr "MB"
 
-#: common.pm:129
+#: common.pm:132
 #, c-format
 msgid "GB"
 msgstr "GB"
 
-#: common.pm:137
+#: common.pm:132 common.pm:141
 #, c-format
 msgid "TB"
 msgstr "TB"
 
-#: common.pm:145
+#: common.pm:149
 #, c-format
 msgid "%d minutes"
 msgstr "%d 分鐘"
 
-#: common.pm:147
+#: common.pm:151
 #, c-format
 msgid "1 minute"
 msgstr "1 分鐘"
 
-#: common.pm:149
+#: common.pm:153
 #, c-format
 msgid "%d seconds"
 msgstr "%d 秒"
 
-#: common.pm:298
+#: common.pm:306
 #, c-format
 msgid "command %s missing"
 msgstr "指令 %s 遺失"
@@ -1130,15 +1130,15 @@ msgid "Mount"
 msgstr "掛載"
 
 #: diskdrake/dav.pm:64 diskdrake/interactive.pm:440
-#: diskdrake/interactive.pm:670 diskdrake/interactive.pm:688
-#: diskdrake/interactive.pm:692 diskdrake/removable.pm:23
+#: diskdrake/interactive.pm:680 diskdrake/interactive.pm:698
+#: diskdrake/interactive.pm:702 diskdrake/removable.pm:23
 #: diskdrake/smbnfs_gtk.pm:79
 #, c-format
 msgid "Mount point"
 msgstr "掛載點"
 
 #: diskdrake/dav.pm:65 diskdrake/interactive.pm:442
-#: diskdrake/interactive.pm:1047 diskdrake/removable.pm:24
+#: diskdrake/interactive.pm:1060 diskdrake/removable.pm:24
 #: diskdrake/smbnfs_gtk.pm:80
 #, c-format
 msgid "Options"
@@ -1147,10 +1147,10 @@ msgstr "選項"
 #: diskdrake/dav.pm:75 diskdrake/hd_gtk.pm:115 diskdrake/interactive.pm:229
 #: diskdrake/interactive.pm:242 diskdrake/interactive.pm:398
 #: diskdrake/interactive.pm:416 diskdrake/interactive.pm:547
-#: diskdrake/interactive.pm:552 diskdrake/interactive.pm:660
-#: diskdrake/interactive.pm:922 diskdrake/interactive.pm:1092
-#: diskdrake/interactive.pm:1105 diskdrake/interactive.pm:1108
-#: diskdrake/interactive.pm:1348 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:19
+#: diskdrake/interactive.pm:552 diskdrake/interactive.pm:670
+#: diskdrake/interactive.pm:935 diskdrake/interactive.pm:1105
+#: diskdrake/interactive.pm:1118 diskdrake/interactive.pm:1121
+#: diskdrake/interactive.pm:1361 diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:19
 #: do_pkgs.pm:24 do_pkgs.pm:40 do_pkgs.pm:56 do_pkgs.pm:61 fsedit.pm:229
 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
 #: scanner.pm:94 scanner.pm:105 scanner.pm:112 scanner.pm:119 wizards.pm:95
@@ -1175,12 +1175,12 @@ msgid "Server: "
 msgstr "伺服器："
 
 #: diskdrake/dav.pm:110 diskdrake/interactive.pm:520
-#: diskdrake/interactive.pm:1230 diskdrake/interactive.pm:1308
+#: diskdrake/interactive.pm:1243 diskdrake/interactive.pm:1321
 #, c-format
 msgid "Mount point: "
 msgstr "掛載點："
 
-#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1315
+#: diskdrake/dav.pm:111 diskdrake/interactive.pm:1328
 #, c-format
 msgid "Options: %s"
 msgstr "選項： %s"
@@ -1194,8 +1194,8 @@ msgstr "選項： %s"
 msgid "Partitioning"
 msgstr "分割磁區"
 
-#: diskdrake/hd_gtk.pm:93 diskdrake/interactive.pm:1067
-#: diskdrake/interactive.pm:1077 diskdrake/interactive.pm:1130
+#: diskdrake/hd_gtk.pm:93 diskdrake/interactive.pm:1080
+#: diskdrake/interactive.pm:1090 diskdrake/interactive.pm:1143
 #, c-format
 msgid "Read carefully!"
 msgstr "仔細閱讀！"
@@ -1226,7 +1226,7 @@ msgstr ""
 "間 (2048 扇區就足夠了)"
 
 #: diskdrake/hd_gtk.pm:162 interactive.pm:640 interactive/gtk.pm:719
-#: interactive/gtk.pm:740 interactive/gtk.pm:760 ugtk2.pm:923 ugtk2.pm:924
+#: interactive/gtk.pm:740 interactive/gtk.pm:760 ugtk2.pm:926 ugtk2.pm:927
 #, c-format
 msgid "Help"
 msgstr "輔助說明"
@@ -1302,7 +1302,7 @@ msgstr "Windows"
 msgid "Other"
 msgstr "其他"
 
-#: diskdrake/hd_gtk.pm:352 diskdrake/interactive.pm:1244
+#: diskdrake/hd_gtk.pm:352 diskdrake/interactive.pm:1257
 #, c-format
 msgid "Empty"
 msgstr "空白"
@@ -1314,12 +1314,12 @@ msgstr "檔案系統格式："
 
 #: diskdrake/hd_gtk.pm:380 diskdrake/interactive.pm:291
 #: diskdrake/interactive.pm:392 diskdrake/interactive.pm:428
-#: diskdrake/interactive.pm:577 diskdrake/interactive.pm:751
-#: diskdrake/interactive.pm:809 diskdrake/interactive.pm:902
-#: diskdrake/interactive.pm:944 diskdrake/interactive.pm:945
-#: diskdrake/interactive.pm:1173 diskdrake/interactive.pm:1211
-#: diskdrake/interactive.pm:1347 do_pkgs.pm:16 do_pkgs.pm:35 do_pkgs.pm:53
-#: harddrake/sound.pm:279
+#: diskdrake/interactive.pm:577 diskdrake/interactive.pm:761
+#: diskdrake/interactive.pm:822 diskdrake/interactive.pm:915
+#: diskdrake/interactive.pm:957 diskdrake/interactive.pm:958
+#: diskdrake/interactive.pm:1186 diskdrake/interactive.pm:1224
+#: diskdrake/interactive.pm:1360 do_pkgs.pm:16 do_pkgs.pm:35 do_pkgs.pm:53
+#: harddrake/sound.pm:285
 #, c-format
 msgid "Warning"
 msgstr "警告"
@@ -1340,7 +1340,7 @@ msgid "Use ``%s'' instead"
 msgstr "用 ``%s'' 代替"
 
 #: diskdrake/hd_gtk.pm:389 diskdrake/interactive.pm:441
-#: diskdrake/interactive.pm:611 diskdrake/interactive.pm:1083
+#: diskdrake/interactive.pm:615 diskdrake/interactive.pm:1096
 #: diskdrake/removable.pm:25 diskdrake/removable.pm:48
 #, c-format
 msgid "Type"
@@ -1372,7 +1372,7 @@ msgid "Toggle to expert mode"
 msgstr "切換到專家模式"
 
 #: diskdrake/interactive.pm:269 diskdrake/interactive.pm:279
-#: diskdrake/interactive.pm:1158
+#: diskdrake/interactive.pm:1171
 #, c-format
 msgid "Confirmation"
 msgstr "確認"
@@ -1424,7 +1424,7 @@ msgid "Auto allocate"
 msgstr "自動分配"
 
 #: diskdrake/interactive.pm:306 diskdrake/interactive.pm:360
-#: interactive/curses.pm:457
+#: interactive/curses.pm:512
 #, c-format
 msgid "More"
 msgstr "更多"
@@ -1515,7 +1515,7 @@ msgstr "正在試圖救回硬碟分割表"
 msgid "Detailed information"
 msgstr "詳細資訊"
 
-#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:764
+#: diskdrake/interactive.pm:444 diskdrake/interactive.pm:774
 #, c-format
 msgid "Resize"
 msgstr "重新變更大小"
@@ -1525,12 +1525,12 @@ msgstr "重新變更大小"
 msgid "Format"
 msgstr "格式化"
 
-#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:850
+#: diskdrake/interactive.pm:447 diskdrake/interactive.pm:863
 #, c-format
 msgid "Add to RAID"
 msgstr "加入到磁碟陣列"
 
-#: diskdrake/interactive.pm:448 diskdrake/interactive.pm:867
+#: diskdrake/interactive.pm:448 diskdrake/interactive.pm:880
 #, c-format
 msgid "Add to LVM"
 msgstr "加入到 LVM"
@@ -1575,12 +1575,12 @@ msgstr "建立新的分割區"
 msgid "Start sector: "
 msgstr "開始的磁區："
 
-#: diskdrake/interactive.pm:516 diskdrake/interactive.pm:937
+#: diskdrake/interactive.pm:516 diskdrake/interactive.pm:950
 #, c-format
 msgid "Size in MB: "
 msgstr "大小 (MB)："
 
-#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:938
+#: diskdrake/interactive.pm:518 diskdrake/interactive.pm:951
 #, c-format
 msgid "Filesystem type: "
 msgstr "檔案系統格式："
@@ -1611,48 +1611,48 @@ msgstr ""
 msgid "Remove the loopback file?"
 msgstr "移除 loopback 檔案？"
 
-#: diskdrake/interactive.pm:596
+#: diskdrake/interactive.pm:599
 #, c-format
 msgid ""
 "After changing type of partition %s, all data on this partition will be lost"
 msgstr "改變分割區 %s 的格式以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:608
+#: diskdrake/interactive.pm:612
 #, c-format
 msgid "Change partition type"
 msgstr "改變分割區格式"
 
-#: diskdrake/interactive.pm:610 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:614 diskdrake/removable.pm:47
 #, c-format
 msgid "Which filesystem do you want?"
 msgstr "您要用那一種檔案系統？"
 
-#: diskdrake/interactive.pm:617
+#: diskdrake/interactive.pm:621
 #, c-format
 msgid "Switching from ext2 to ext3"
 msgstr "由 ext2 正在切換到 ext3"
 
-#: diskdrake/interactive.pm:637 diskdrake/interactive.pm:640
+#: diskdrake/interactive.pm:647 diskdrake/interactive.pm:650
 #, c-format
 msgid "Which volume label?"
 msgstr "哪一個磁區標籤？"
 
-#: diskdrake/interactive.pm:641
+#: diskdrake/interactive.pm:651
 #, c-format
 msgid "Label:"
 msgstr "標籤："
 
-#: diskdrake/interactive.pm:655
+#: diskdrake/interactive.pm:665
 #, c-format
 msgid "Where do you want to mount the loopback file %s?"
 msgstr "您要把 loopback 檔案 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:656
+#: diskdrake/interactive.pm:666
 #, c-format
 msgid "Where do you want to mount device %s?"
 msgstr "您要把這個裝置 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:661
+#: diskdrake/interactive.pm:671
 #, c-format
 msgid ""
 "Can not unset mount point as this partition is used for loop back.\n"
@@ -1661,58 +1661,58 @@ msgstr ""
 "因為這個分割區被用作 loop back 使用，所以無法解除\n"
 "這個掛載點。請先取消 loopback 的設定"
 
-#: diskdrake/interactive.pm:691
+#: diskdrake/interactive.pm:701
 #, c-format
 msgid "Where do you want to mount %s?"
 msgstr "您要將 %s 掛載在那裡？"
 
-#: diskdrake/interactive.pm:715 diskdrake/interactive.pm:798
+#: diskdrake/interactive.pm:725 diskdrake/interactive.pm:811
 #: fs/partitioning_wizard.pm:141 fs/partitioning_wizard.pm:173
 #, c-format
 msgid "Resizing"
 msgstr "正在重設大小"
 
-#: diskdrake/interactive.pm:715
+#: diskdrake/interactive.pm:725
 #, c-format
 msgid "Computing FAT filesystem bounds"
 msgstr "正在計算 FAT 分割區的邊界"
 
-#: diskdrake/interactive.pm:751
+#: diskdrake/interactive.pm:761
 #, c-format
 msgid "This partition is not resizeable"
 msgstr "這個分割區無法重新調整大小"
 
-#: diskdrake/interactive.pm:756
+#: diskdrake/interactive.pm:766
 #, c-format
 msgid "All data on this partition should be backed-up"
 msgstr "所有在這個分割區上的資料都應該先經過備份"
 
-#: diskdrake/interactive.pm:758
+#: diskdrake/interactive.pm:768
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr "在改變分割區 %s 的大小以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:765
+#: diskdrake/interactive.pm:775
 #, c-format
 msgid "Choose the new size"
 msgstr "選取新的大小"
 
-#: diskdrake/interactive.pm:766
+#: diskdrake/interactive.pm:776
 #, c-format
 msgid "New size in MB: "
 msgstr "新大小 (MB)："
 
-#: diskdrake/interactive.pm:767
+#: diskdrake/interactive.pm:777
 #, c-format
 msgid "Minimum size: %s MB"
 msgstr "最小容量：%s MB"
 
-#: diskdrake/interactive.pm:768
+#: diskdrake/interactive.pm:778
 #, c-format
 msgid "Maximum size: %s MB"
 msgstr "最大容量：%s MB"
 
-#: diskdrake/interactive.pm:809 fs/partitioning_wizard.pm:181
+#: diskdrake/interactive.pm:822 fs/partitioning_wizard.pm:181
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s), \n"
@@ -1721,27 +1721,27 @@ msgstr ""
 "為確保重新調整分割區大小後的資料正確性，當您下次從 Windows(TM)\n"
 "開機時便會執行檔案系統檢查。"
 
-#: diskdrake/interactive.pm:850
+#: diskdrake/interactive.pm:863
 #, c-format
 msgid "Choose an existing RAID to add to"
 msgstr "選取一存在的磁碟陣列加入到"
 
-#: diskdrake/interactive.pm:852 diskdrake/interactive.pm:869
+#: diskdrake/interactive.pm:865 diskdrake/interactive.pm:882
 #, c-format
 msgid "new"
 msgstr "新增"
 
-#: diskdrake/interactive.pm:867
+#: diskdrake/interactive.pm:880
 #, c-format
 msgid "Choose an existing LVM to add to"
 msgstr "選取一個已經存在的 LVM 以加入"
 
-#: diskdrake/interactive.pm:874
+#: diskdrake/interactive.pm:887
 #, c-format
 msgid "LVM name?"
 msgstr "LVM 名稱？"
 
-#: diskdrake/interactive.pm:902
+#: diskdrake/interactive.pm:915
 #, c-format
 msgid ""
 "Physical volume %s is still in use.\n"
@@ -1750,107 +1750,107 @@ msgstr ""
 "實體磁區 %s 仍然在使用中。\n"
 "您要把位於這個磁區的實體延伸移到另一個磁區嗎？"
 
-#: diskdrake/interactive.pm:904
+#: diskdrake/interactive.pm:917
 #, c-format
 msgid "Moving physical extents"
 msgstr "移動實體延伸"
 
-#: diskdrake/interactive.pm:922
+#: diskdrake/interactive.pm:935
 #, c-format
 msgid "This partition can not be used for loopback"
 msgstr "這個分割區不能用來作為 loopback"
 
-#: diskdrake/interactive.pm:935
+#: diskdrake/interactive.pm:948
 #, c-format
 msgid "Loopback"
 msgstr "Loopback"
 
-#: diskdrake/interactive.pm:936
+#: diskdrake/interactive.pm:949
 #, c-format
 msgid "Loopback file name: "
 msgstr "Loopback 檔案名稱："
 
-#: diskdrake/interactive.pm:941
+#: diskdrake/interactive.pm:954
 #, c-format
 msgid "Give a file name"
 msgstr "輸入一個檔案名稱"
 
-#: diskdrake/interactive.pm:944
+#: diskdrake/interactive.pm:957
 #, c-format
 msgid "File is already used by another loopback, choose another one"
 msgstr "檔案已被用來作為其他的 loopback，請選擇其他檔案"
 
-#: diskdrake/interactive.pm:945
+#: diskdrake/interactive.pm:958
 #, c-format
 msgid "File already exists. Use it?"
 msgstr "檔案已經存在了。要使用它嗎？"
 
-#: diskdrake/interactive.pm:974 diskdrake/interactive.pm:977
+#: diskdrake/interactive.pm:987 diskdrake/interactive.pm:990
 #, c-format
 msgid "Mount options"
 msgstr "掛載參數"
 
-#: diskdrake/interactive.pm:984
+#: diskdrake/interactive.pm:997
 #, c-format
 msgid "Various"
 msgstr "各種的"
 
-#: diskdrake/interactive.pm:1049
+#: diskdrake/interactive.pm:1062
 #, c-format
 msgid "device"
 msgstr "裝置"
 
-#: diskdrake/interactive.pm:1050
+#: diskdrake/interactive.pm:1063
 #, c-format
 msgid "level"
 msgstr "階層"
 
-#: diskdrake/interactive.pm:1051
+#: diskdrake/interactive.pm:1064
 #, c-format
 msgid "chunk size in KiB"
 msgstr "組塊大小以 KiB 計量"
 
-#: diskdrake/interactive.pm:1068
+#: diskdrake/interactive.pm:1081
 #, c-format
 msgid "Be careful: this operation is dangerous."
 msgstr "請小心：這個動作很危險。"
 
-#: diskdrake/interactive.pm:1083
+#: diskdrake/interactive.pm:1096
 #, c-format
 msgid "What type of partitioning?"
 msgstr "以那種形式分割？"
 
-#: diskdrake/interactive.pm:1121
+#: diskdrake/interactive.pm:1134
 #, c-format
 msgid "You'll need to reboot before the modification can take place"
 msgstr "您需要重新開機以便於讓異動的設定生效"
 
-#: diskdrake/interactive.pm:1130
+#: diskdrake/interactive.pm:1143
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk!"
 msgstr "正在準備將要寫入磁碟 %s 的硬碟分割表！"
 
-#: diskdrake/interactive.pm:1153
+#: diskdrake/interactive.pm:1166
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr "在對分割區 %s 進行格式化的動作以後，所有在這個分割區上的資料都會遺失"
 
-#: diskdrake/interactive.pm:1158 fs/partitioning.pm:49
+#: diskdrake/interactive.pm:1171 fs/partitioning.pm:49
 #, c-format
 msgid "Check bad blocks?"
 msgstr "檢查壞掉的區塊？"
 
-#: diskdrake/interactive.pm:1172
+#: diskdrake/interactive.pm:1185
 #, c-format
 msgid "Move files to the new partition"
 msgstr "將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1172
+#: diskdrake/interactive.pm:1185
 #, c-format
 msgid "Hide files"
 msgstr "隱藏檔案"
 
-#: diskdrake/interactive.pm:1173
+#: diskdrake/interactive.pm:1186
 #, c-format
 msgid ""
 "Directory %s already contains data\n"
@@ -1866,103 +1866,103 @@ msgstr ""
 "您可以選擇把檔案移入要掛載到此的磁區中，或者把它們留在原地 (這會讓它們隱藏起"
 "來，而目錄中顯示出來的會是掛載上的磁區內容)"
 
-#: diskdrake/interactive.pm:1188
+#: diskdrake/interactive.pm:1201
 #, c-format
 msgid "Moving files to the new partition"
 msgstr "正在將檔案搬移到新的分割區"
 
-#: diskdrake/interactive.pm:1192
+#: diskdrake/interactive.pm:1205
 #, c-format
 msgid "Copying %s"
 msgstr "正在複製 %s"
 
-#: diskdrake/interactive.pm:1196
+#: diskdrake/interactive.pm:1209
 #, c-format
 msgid "Removing %s"
 msgstr "正在移除 %s"
 
-#: diskdrake/interactive.pm:1210
+#: diskdrake/interactive.pm:1223
 #, c-format
 msgid "partition %s is now known as %s"
 msgstr "分割區 %s 現在被命名為 %s 了"
 
-#: diskdrake/interactive.pm:1211
+#: diskdrake/interactive.pm:1224
 #, c-format
 msgid "Partitions have been renumbered: "
 msgstr "分割區已經重新編號："
 
-#: diskdrake/interactive.pm:1231 diskdrake/interactive.pm:1293
+#: diskdrake/interactive.pm:1244 diskdrake/interactive.pm:1306
 #, c-format
 msgid "Device: "
 msgstr "裝置："
 
-#: diskdrake/interactive.pm:1232
+#: diskdrake/interactive.pm:1245
 #, c-format
 msgid "Volume label: "
 msgstr "磁區標籤："
 
-#: diskdrake/interactive.pm:1233
+#: diskdrake/interactive.pm:1246
 #, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 磁碟代號：%s (猜測值)\n"
 
-#: diskdrake/interactive.pm:1237 diskdrake/interactive.pm:1246
-#: diskdrake/interactive.pm:1311
+#: diskdrake/interactive.pm:1250 diskdrake/interactive.pm:1259
+#: diskdrake/interactive.pm:1324
 #, c-format
 msgid "Type: "
 msgstr "格式："
 
-#: diskdrake/interactive.pm:1241
+#: diskdrake/interactive.pm:1254
 #, c-format
 msgid "Name: "
 msgstr "名稱："
 
-#: diskdrake/interactive.pm:1248
+#: diskdrake/interactive.pm:1261
 #, c-format
 msgid "Start: sector %s\n"
 msgstr "始於：第 %s 扇區\n"
 
-#: diskdrake/interactive.pm:1249
+#: diskdrake/interactive.pm:1262
 #, c-format
 msgid "Size: %s"
 msgstr "大小：%s"
 
-#: diskdrake/interactive.pm:1251
+#: diskdrake/interactive.pm:1264
 #, c-format
 msgid ", %s sectors"
 msgstr "，%s 扇區"
 
-#: diskdrake/interactive.pm:1253
+#: diskdrake/interactive.pm:1266
 #, c-format
 msgid "Cylinder %d to %d\n"
 msgstr "%d 磁柱到第 %d 磁柱\n"
 
-#: diskdrake/interactive.pm:1254
+#: diskdrake/interactive.pm:1267
 #, c-format
 msgid "Number of logical extents: %d\n"
 msgstr "邏輯延伸的數目：%d\n"
 
-#: diskdrake/interactive.pm:1255
+#: diskdrake/interactive.pm:1268
 #, c-format
 msgid "Formatted\n"
 msgstr "已格式化\n"
 
-#: diskdrake/interactive.pm:1256
+#: diskdrake/interactive.pm:1269
 #, c-format
 msgid "Not formatted\n"
 msgstr "未格式化\n"
 
-#: diskdrake/interactive.pm:1257
+#: diskdrake/interactive.pm:1270
 #, c-format
 msgid "Mounted\n"
 msgstr "已掛載\n"
 
-#: diskdrake/interactive.pm:1258
+#: diskdrake/interactive.pm:1271
 #, c-format
 msgid "RAID %s\n"
 msgstr "磁碟陣列 %s\n"
 
-#: diskdrake/interactive.pm:1263
+#: diskdrake/interactive.pm:1276
 #, c-format
 msgid ""
 "Loopback file(s):\n"
@@ -1971,7 +1971,7 @@ msgstr ""
 "loopback 檔案：\n"
 "   %s\n"
 
-#: diskdrake/interactive.pm:1264
+#: diskdrake/interactive.pm:1277
 #, c-format
 msgid ""
 "Partition booted by default\n"
@@ -1980,27 +1980,27 @@ msgstr ""
 "預設開機的分割區\n"
 "    (給 MS-DOS 開機程式用的，跟 lilo 無關)\n"
 
-#: diskdrake/interactive.pm:1266
+#: diskdrake/interactive.pm:1279
 #, c-format
 msgid "Level %s\n"
 msgstr "階層 %s\n"
 
-#: diskdrake/interactive.pm:1267
+#: diskdrake/interactive.pm:1280
 #, c-format
 msgid "Chunk size %d KiB\n"
 msgstr "組塊大小 %d KiB\n"
 
-#: diskdrake/interactive.pm:1268
+#: diskdrake/interactive.pm:1281
 #, c-format
 msgid "RAID-disks %s\n"
 msgstr "磁碟陣列-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1270
+#: diskdrake/interactive.pm:1283
 #, c-format
 msgid "Loopback file name: %s"
 msgstr "Loopback 檔案名稱： %s"
 
-#: diskdrake/interactive.pm:1273
+#: diskdrake/interactive.pm:1286
 #, c-format
 msgid ""
 "\n"
@@ -2013,7 +2013,7 @@ msgstr ""
 "是透過驅動程式產生出來的\n"
 "您應該不要去異動這個分割區資料。\n"
 
-#: diskdrake/interactive.pm:1276
+#: diskdrake/interactive.pm:1289
 #, c-format
 msgid ""
 "\n"
@@ -2025,77 +2025,77 @@ msgstr ""
 "這個特殊分割區是用來作為\n"
 "雙重開機使用的。\n"
 
-#: diskdrake/interactive.pm:1285
+#: diskdrake/interactive.pm:1298
 #, c-format
-msgid "Empty space on %s (%s)"
+msgid "Free space on %s (%s)"
 msgstr ""
 
-#: diskdrake/interactive.pm:1294
+#: diskdrake/interactive.pm:1307
 #, c-format
 msgid "Read-only"
 msgstr "唯讀"
 
-#: diskdrake/interactive.pm:1295
+#: diskdrake/interactive.pm:1308
 #, c-format
 msgid "Size: %s\n"
 msgstr "大小：%s\n"
 
-#: diskdrake/interactive.pm:1296
+#: diskdrake/interactive.pm:1309
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "幾何：%s 磁柱，%s 讀寫頭，%s 扇區\n"
 
-#: diskdrake/interactive.pm:1297
+#: diskdrake/interactive.pm:1310
 #, c-format
 msgid "Info: "
 msgstr "資訊："
 
-#: diskdrake/interactive.pm:1298
+#: diskdrake/interactive.pm:1311
 #, c-format
 msgid "LVM-disks %s\n"
 msgstr "LVM-磁碟 %s\n"
 
-#: diskdrake/interactive.pm:1299
+#: diskdrake/interactive.pm:1312
 #, c-format
 msgid "Partition table type: %s\n"
 msgstr "硬碟分割表形式：%s\n"
 
-#: diskdrake/interactive.pm:1300
+#: diskdrake/interactive.pm:1313
 #, c-format
 msgid "on channel %d id %d\n"
 msgstr "位在通道 %d id %d\n"
 
-#: diskdrake/interactive.pm:1343
+#: diskdrake/interactive.pm:1356
 #, c-format
 msgid "Filesystem encryption key"
 msgstr "檔案系統加密金鑰"
 
-#: diskdrake/interactive.pm:1344
+#: diskdrake/interactive.pm:1357
 #, c-format
 msgid "Choose your filesystem encryption key"
 msgstr "選擇您檔案系統所使用的加密金鑰"
 
-#: diskdrake/interactive.pm:1347
+#: diskdrake/interactive.pm:1360
 #, c-format
 msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr "這個加密金鑰太簡單了 (至少要有 %d 個字元才行)"
 
-#: diskdrake/interactive.pm:1348
+#: diskdrake/interactive.pm:1361
 #, c-format
 msgid "The encryption keys do not match"
 msgstr "輸入的加密金鑰不符合"
 
-#: diskdrake/interactive.pm:1351
+#: diskdrake/interactive.pm:1364
 #, c-format
 msgid "Encryption key"
 msgstr "加密金鑰"
 
-#: diskdrake/interactive.pm:1352
+#: diskdrake/interactive.pm:1365
 #, c-format
 msgid "Encryption key (again)"
 msgstr "再次輸入加密金鑰"
 
-#: diskdrake/interactive.pm:1354
+#: diskdrake/interactive.pm:1367
 #, c-format
 msgid "Encryption algorithm"
 msgstr "加密演算法"
@@ -2106,9 +2106,9 @@ msgid "Change type"
 msgstr "改變分割區格式"
 
 #: diskdrake/smbnfs_gtk.pm:81 interactive.pm:126 interactive.pm:539
-#: interactive/curses.pm:214 interactive/http.pm:104 interactive/http.pm:160
-#: interactive/stdio.pm:39 interactive/stdio.pm:142 ugtk2.pm:404 ugtk2.pm:506
-#: ugtk2.pm:515 ugtk2.pm:788
+#: interactive/curses.pm:260 interactive/http.pm:104 interactive/http.pm:160
+#: interactive/stdio.pm:39 interactive/stdio.pm:142 ugtk2.pm:407 ugtk2.pm:509
+#: ugtk2.pm:518 ugtk2.pm:791
 #, c-format
 msgid "Cancel"
 msgstr "取消"
@@ -2198,22 +2198,22 @@ msgstr ""
 msgid "You must have a FAT partition mounted in /boot/efi"
 msgstr "您必須有一個掛載於 /boot/efi 的 FAT 分割區"
 
-#: fs/format.pm:59 fs/format.pm:66
+#: fs/format.pm:60 fs/format.pm:67
 #, c-format
 msgid "Formatting partition %s"
 msgstr "正在格式化分割區 %s"
 
-#: fs/format.pm:63
+#: fs/format.pm:64
 #, c-format
 msgid "Creating and formatting file %s"
 msgstr "建立並格式化檔案 %s"
 
-#: fs/format.pm:116
+#: fs/format.pm:117
 #, c-format
 msgid "I do not know how to format %s in type %s"
 msgstr "不知道要如何將 %s 格式化為 %s 格式"
 
-#: fs/format.pm:121 fs/format.pm:123
+#: fs/format.pm:122 fs/format.pm:124
 #, c-format
 msgid "%s formatting of %s failed"
 msgstr "以 %s 格式化 %s 失敗"
@@ -2514,8 +2514,8 @@ msgstr ""
 "當您確定之後，請按下%s。"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: fs/partitioning_wizard.pm:160 interactive.pm:538 interactive/curses.pm:217
-#: ugtk2.pm:508
+#: fs/partitioning_wizard.pm:160 interactive.pm:538 interactive/curses.pm:263
+#: ugtk2.pm:511
 #, c-format
 msgid "Next"
 msgstr "下一步"
@@ -2599,12 +2599,12 @@ msgstr "DrakX 分割精靈找到了下列方案："
 msgid "Partitioning failed: %s"
 msgstr "硬碟分割失敗：%s"
 
-#: fs/type.pm:366
+#: fs/type.pm:367
 #, c-format
 msgid "You can not use JFS for partitions smaller than 16MB"
 msgstr "小於 16MB 的分割區不能使用 JFS 格式"
 
-#: fs/type.pm:367
+#: fs/type.pm:368
 #, c-format
 msgid "You can not use ReiserFS for partitions smaller than 32MB"
 msgstr "小於 32MB 的分割區不能使用 ReiserFS 格式"
@@ -2760,12 +2760,12 @@ msgstr "AGP 控制器"
 msgid "Videocard"
 msgstr "顯示卡"
 
-#: harddrake/data.pm:157
+#: harddrake/data.pm:156
 #, c-format
 msgid "DVB card"
 msgstr "數位電視卡"
 
-#: harddrake/data.pm:165
+#: harddrake/data.pm:164
 #, c-format
 msgid "Tvcard"
 msgstr "電視卡"
@@ -2933,35 +2933,40 @@ msgstr "滑鼠"
 
 #: harddrake/data.pm:505
 #, c-format
+msgid "Biometry"
+msgstr ""
+
+#: harddrake/data.pm:513
+#, c-format
 msgid "UPS"
 msgstr "UPS 不斷電系統"
 
-#: harddrake/data.pm:514
+#: harddrake/data.pm:522
 #, c-format
 msgid "Scanner"
 msgstr "掃描器"
 
-#: harddrake/data.pm:524
+#: harddrake/data.pm:533
 #, c-format
 msgid "Unknown/Others"
 msgstr "未知/其他"
 
-#: harddrake/data.pm:552
+#: harddrake/data.pm:561
 #, c-format
 msgid "cpu # "
 msgstr "CPU 編號"
 
-#: harddrake/sound.pm:195
+#: harddrake/sound.pm:201
 #, c-format
 msgid "Please Wait... Applying the configuration"
 msgstr "請稍待... 正在套用該設定"
 
-#: harddrake/sound.pm:232
+#: harddrake/sound.pm:238
 #, c-format
 msgid "No alternative driver"
 msgstr "沒有其他可供選擇的驅動程式"
 
-#: harddrake/sound.pm:233
+#: harddrake/sound.pm:239
 #, c-format
 msgid ""
 "There's no known OSS/ALSA alternative driver for your sound card (%s) which "
@@ -2970,12 +2975,12 @@ msgstr ""
 "您的音效卡 (%s) 正在使用 \"%s\" 驅動程式，目前沒有其他可供選擇的 OSS/ALSA 驅"
 "動程式支援它"
 
-#: harddrake/sound.pm:239
+#: harddrake/sound.pm:245
 #, c-format
 msgid "Sound configuration"
 msgstr "音效設定"
 
-#: harddrake/sound.pm:241
+#: harddrake/sound.pm:247
 #, c-format
 msgid ""
 "Here you can select an alternative driver (either OSS or ALSA) for your "
@@ -2985,7 +2990,7 @@ msgstr "您可以選擇使用其他的 (OSS 或者 ALSA) 的驅動程式給您�
 #. -PO: here the first %s is either "OSS" or "ALSA", 
 #. -PO: the second %s is the name of the current driver
 #. -PO: and the third %s is the name of the default driver
-#: harddrake/sound.pm:246
+#: harddrake/sound.pm:252
 #, c-format
 msgid ""
 "\n"
@@ -2997,7 +3002,7 @@ msgstr ""
 "\n"
 "您的音效卡現在正在使用 %s\"%s\" 驅動程式 (您的音效卡預設的驅動程式為 \"%s\")"
 
-#: harddrake/sound.pm:248
+#: harddrake/sound.pm:254
 #, c-format
 msgid ""
 "OSS (Open Sound System) was the first sound API. It's an OS independent "
@@ -3029,17 +3034,17 @@ msgstr ""
 "- 相容於 OSS 的舊 API\n"
 "- 提供許多強化的功能但需要使用 ALSA 函式庫的新 ALSA API。\n"
 
-#: harddrake/sound.pm:262 harddrake/sound.pm:351
+#: harddrake/sound.pm:268 harddrake/sound.pm:357
 #, c-format
 msgid "Driver:"
 msgstr "驅動程式："
 
-#: harddrake/sound.pm:271
+#: harddrake/sound.pm:277
 #, c-format
 msgid "Trouble shooting"
 msgstr "疑難排解"
 
-#: harddrake/sound.pm:279
+#: harddrake/sound.pm:285
 #, c-format
 msgid ""
 "The old \"%s\" driver is blacklisted.\n"
@@ -3054,45 +3059,45 @@ msgstr ""
 "\n"
 "於下一次開機時將只會使用新的 \"%s\" 驅動程式。"
 
-#: harddrake/sound.pm:287
+#: harddrake/sound.pm:293
 #, c-format
 msgid "No open source driver"
 msgstr "無開放原始碼的驅動程式可用"
 
-#: harddrake/sound.pm:288
+#: harddrake/sound.pm:294
 #, c-format
 msgid ""
 "There's no free driver for your sound card (%s), but there's a proprietary "
 "driver at \"%s\"."
 msgstr "您的音效卡 (%s) 沒有自由的驅動程式，但是有私有的驅動程式於 \"%s\"."
 
-#: harddrake/sound.pm:291
+#: harddrake/sound.pm:297
 #, c-format
 msgid "No known driver"
 msgstr "無已知的驅動程式"
 
-#: harddrake/sound.pm:292
+#: harddrake/sound.pm:298
 #, c-format
 msgid "There's no known driver for your sound card (%s)"
 msgstr "您使用的音效卡尚未有已知的驅動程式 (%s)"
 
-#: harddrake/sound.pm:296
+#: harddrake/sound.pm:302
 #, c-format
 msgid "Unknown driver"
 msgstr "未知的驅動程式"
 
-#: harddrake/sound.pm:297
+#: harddrake/sound.pm:303
 #, c-format
 msgid "Error: The \"%s\" driver for your sound card is unlisted"
 msgstr "錯誤：您的音效卡驅動程式 \"%s\" 不在列表中"
 
-#: harddrake/sound.pm:311
+#: harddrake/sound.pm:317
 #, c-format
 msgid "Sound trouble shooting"
 msgstr "音效問題排除"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:314
+#: harddrake/sound.pm:320
 #, c-format
 msgid ""
 "The classic bug sound tester is to run the following commands:\n"
@@ -3131,18 +3136,18 @@ msgstr ""
 "\n"
 "- \"/sbin/fuser -v /dev/dsp\" 將指出哪個程式在使用音效卡。\n"
 
-#: harddrake/sound.pm:340
+#: harddrake/sound.pm:346
 #, c-format
 msgid "Let me pick any driver"
 msgstr "讓我選擇任何驅動程式"
 
-#: harddrake/sound.pm:343
+#: harddrake/sound.pm:349
 #, c-format
 msgid "Choosing an arbitrary driver"
 msgstr "正在選擇任意的驅動程式"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: harddrake/sound.pm:346
+#: harddrake/sound.pm:352
 #, c-format
 msgid ""
 "If you really think that you know which driver is the right one for your "
@@ -3199,20 +3204,20 @@ msgstr "介面卡型號："
 msgid "Tuner type:"
 msgstr "調頻類型："
 
-#: interactive.pm:125 interactive.pm:538 interactive/curses.pm:217
+#: interactive.pm:125 interactive.pm:538 interactive/curses.pm:263
 #: interactive/http.pm:103 interactive/http.pm:156 interactive/stdio.pm:39
-#: interactive/stdio.pm:142 interactive/stdio.pm:143 ugtk2.pm:410 ugtk2.pm:508
-#: ugtk2.pm:788 ugtk2.pm:811
+#: interactive/stdio.pm:142 interactive/stdio.pm:143 ugtk2.pm:413 ugtk2.pm:511
+#: ugtk2.pm:791 ugtk2.pm:814
 #, c-format
 msgid "Ok"
 msgstr "確定"
 
-#: interactive.pm:224 modules/interactive.pm:71 ugtk2.pm:787 wizards.pm:156
+#: interactive.pm:224 modules/interactive.pm:71 ugtk2.pm:790 wizards.pm:156
 #, c-format
 msgid "Yes"
 msgstr "是的"
 
-#: interactive.pm:224 modules/interactive.pm:71 ugtk2.pm:787 wizards.pm:156
+#: interactive.pm:224 modules/interactive.pm:71 ugtk2.pm:790 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
@@ -3237,12 +3242,12 @@ msgstr "修改"
 msgid "Remove"
 msgstr "移除"
 
-#: interactive.pm:538 interactive/curses.pm:217 ugtk2.pm:508
+#: interactive.pm:538 interactive/curses.pm:263 ugtk2.pm:511
 #, c-format
 msgid "Finish"
 msgstr "完成"
 
-#: interactive.pm:539 interactive/curses.pm:214 ugtk2.pm:506
+#: interactive.pm:539 interactive/curses.pm:260 ugtk2.pm:509
 #, c-format
 msgid "Previous"
 msgstr "上一步"
@@ -4518,7 +4523,7 @@ msgstr "尚比亞"
 msgid "Zimbabwe"
 msgstr "辛巴威"
 
-#: lang.pm:1153
+#: lang.pm:1154
 #, c-format
 msgid "Welcome to %s"
 msgstr "歡迎使用 %s"
@@ -6090,7 +6095,7 @@ msgstr ""
 "抱歉 ! 這個服務項目並沒有\n"
 "額外的相關資訊。"
 
-#: services.pm:212 ugtk2.pm:898
+#: services.pm:212 ugtk2.pm:901
 #, c-format
 msgid "Info"
 msgstr "資訊"
@@ -6115,7 +6120,7 @@ msgstr "啟動"
 msgid "Stop"
 msgstr "停止"
 
-#: standalone.pm:24
+#: standalone.pm:23
 #, c-format
 msgid ""
 "This program is free software; you can redistribute it and/or modify\n"
@@ -6147,7 +6152,7 @@ msgstr ""
 " 51 Franklin Street, Fifth Floor,\n"
 " Boston, MA 02110-1301, USA.\n"
 
-#: standalone.pm:43
+#: standalone.pm:42
 #, c-format
 msgid ""
 "[--config-info] [--daemon] [--debug] [--default] [--show-conf]\n"
@@ -6163,7 +6168,7 @@ msgid ""
 "--version             : show version number.\n"
 msgstr ""
 
-#: standalone.pm:55
+#: standalone.pm:54
 #, c-format
 msgid ""
 "[--boot] [--splash]\n"
@@ -6173,7 +6178,7 @@ msgid ""
 "default mode: offer to configure autologin feature"
 msgstr ""
 
-#: standalone.pm:60
+#: standalone.pm:59
 #, c-format
 msgid ""
 "[OPTIONS] [PROGRAM_NAME]\n"
@@ -6184,7 +6189,7 @@ msgid ""
 "  --incident        - program should be one of Mandriva Linux tools"
 msgstr ""
 
-#: standalone.pm:66
+#: standalone.pm:65
 #, c-format
 msgid ""
 "[--add]\n"
@@ -6195,7 +6200,7 @@ msgid ""
 "  --wizard          - like --add"
 msgstr ""
 
-#: standalone.pm:72
+#: standalone.pm:71
 #, c-format
 msgid ""
 "\n"
@@ -6213,7 +6218,7 @@ msgid ""
 "                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: standalone.pm:87
+#: standalone.pm:86
 #, c-format
 msgid ""
 "[OPTIONS]...\n"
@@ -6231,17 +6236,17 @@ msgid ""
 "IP, nbi image name)"
 msgstr ""
 
-#: standalone.pm:99
+#: standalone.pm:98
 #, c-format
 msgid "[keyboard]"
 msgstr "[鍵盤]"
 
-#: standalone.pm:100
+#: standalone.pm:99
 #, c-format
 msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr ""
 
-#: standalone.pm:101
+#: standalone.pm:100
 #, c-format
 msgid ""
 "[OPTIONS]\n"
@@ -6255,7 +6260,7 @@ msgid ""
 "--quiet : do not be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: standalone.pm:111
+#: standalone.pm:110
 #, c-format
 msgid ""
 "[OPTION]...\n"
@@ -6267,14 +6272,14 @@ msgid ""
 "  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
 msgstr ""
 
-#: standalone.pm:116
+#: standalone.pm:115
 #, c-format
 msgid ""
 "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
 "usbtable] [--dynamic=dev]"
 msgstr ""
 
-#: standalone.pm:117
+#: standalone.pm:116
 #, c-format
 msgid ""
 " [everything]\n"
@@ -6282,7 +6287,7 @@ msgid ""
 "       XFdrake resolution"
 msgstr ""
 
-#: standalone.pm:150
+#: standalone.pm:149
 #, c-format
 msgid ""
 "\n"
@@ -6345,47 +6350,47 @@ msgstr "俄羅斯聯邦"
 msgid "Yugoslavia"
 msgstr "南斯拉夫"
 
-#: ugtk2.pm:788
+#: ugtk2.pm:791
 #, c-format
 msgid "Is this correct?"
 msgstr "這樣子正確嗎？"
 
-#: ugtk2.pm:848
+#: ugtk2.pm:851
 #, c-format
 msgid "No file chosen"
 msgstr "未選擇檔案"
 
-#: ugtk2.pm:850
+#: ugtk2.pm:853
 #, c-format
 msgid "You have chosen a file, not a directory"
 msgstr "您選擇了檔案而非目錄"
 
-#: ugtk2.pm:852
+#: ugtk2.pm:855
 #, c-format
 msgid "You have chosen a directory, not a file"
 msgstr "您選擇了目錄而非檔案"
 
-#: ugtk2.pm:854
+#: ugtk2.pm:857
 #, c-format
 msgid "No such directory"
 msgstr "無此目錄"
 
-#: ugtk2.pm:854
+#: ugtk2.pm:857
 #, c-format
 msgid "No such file"
 msgstr "無此檔案"
 
-#: ugtk2.pm:933
+#: ugtk2.pm:936
 #, c-format
 msgid "Expand Tree"
 msgstr "展開樹狀結構"
 
-#: ugtk2.pm:934
+#: ugtk2.pm:937
 #, c-format
 msgid "Collapse Tree"
 msgstr "縮疊樹狀結構"
 
-#: ugtk2.pm:935
+#: ugtk2.pm:938
 #, c-format
 msgid "Toggle between flat and group sorted"
 msgstr "切換是否依照群組來加以排序"