updated pot file

1 files changed, 274 insertions, 266 deletions

diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
index 264da1d33..a38f2bfbe 100644
--- a/perl-install/share/po/zh_CN.po
+++ b/perl-install/share/po/zh_CN.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX 2006\n"
-"POT-Creation-Date: 2005-09-14 19:41+0800\n"
+"POT-Creation-Date: 2005-09-16 17:08+0200\n"
 "PO-Revision-Date: 2005-09-13 00:50+0800\n"
 "Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
 "Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
@@ -167,15 +167,15 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: install_any.pm:1822 install_steps.pm:81 install_steps_interactive.pm:37
 #: interactive/http.pm:117 interactive/http.pm:118 network/ndiswrapper.pm:27
 #: network/ndiswrapper.pm:42 network/ndiswrapper.pm:89
-#: network/ndiswrapper.pm:101 network/netconnect.pm:834
-#: network/netconnect.pm:933 network/netconnect.pm:937
-#: network/netconnect.pm:941 network/netconnect.pm:946
-#: network/netconnect.pm:1091 network/netconnect.pm:1095
-#: network/netconnect.pm:1214 network/netconnect.pm:1219
-#: network/netconnect.pm:1239 network/netconnect.pm:1393
-#: network/thirdparty.pm:306 network/thirdparty.pm:313
-#: network/thirdparty.pm:357 network/thirdparty.pm:359
-#: network/thirdparty.pm:380 network/thirdparty.pm:404
+#: network/ndiswrapper.pm:101 network/netconnect.pm:835
+#: network/netconnect.pm:934 network/netconnect.pm:938
+#: network/netconnect.pm:942 network/netconnect.pm:947
+#: network/netconnect.pm:1092 network/netconnect.pm:1096
+#: network/netconnect.pm:1215 network/netconnect.pm:1220
+#: network/netconnect.pm:1240 network/netconnect.pm:1394
+#: network/thirdparty.pm:319 network/thirdparty.pm:326
+#: network/thirdparty.pm:370 network/thirdparty.pm:372
+#: network/thirdparty.pm:393 network/thirdparty.pm:417
 #: printer/printerdrake.pm:244 printer/printerdrake.pm:251
 #: printer/printerdrake.pm:276 printer/printerdrake.pm:422
 #: printer/printerdrake.pm:427 printer/printerdrake.pm:440
@@ -218,7 +218,7 @@ msgstr "请稍候, 正在检测并配置设备..."
 #: standalone/drakgw:50 standalone/drakgw:188 standalone/drakhosts:98
 #: standalone/drakhosts:246 standalone/drakhosts:253 standalone/drakhosts:260
 #: standalone/draknfs:306 standalone/draknfs:609 standalone/draknfs:616
-#: standalone/draknfs:623 standalone/drakroam:29 standalone/draksambashare:379
+#: standalone/draknfs:623 standalone/drakroam:33 standalone/draksambashare:379
 #: standalone/draksambashare:383 standalone/draksambashare:386
 #: standalone/draksambashare:389 standalone/draksambashare:449
 #: standalone/draksambashare:473 standalone/draksambashare:547
@@ -412,52 +412,52 @@ msgstr "无法安装 Xorg 软件包: %s"
 msgid "Select the memory size of your graphics card"
 msgstr "请选择您显示卡上内存的大小"
 
-#: Xconfig/card.pm:351
+#: Xconfig/card.pm:357
 #, c-format
 msgid "Xorg configuration"
 msgstr "Xorg 配置"
 
-#: Xconfig/card.pm:353
+#: Xconfig/card.pm:359
 #, c-format
 msgid "Which configuration of Xorg do you want to have?"
 msgstr "您希望拥有哪个 Xorg 配置?"
 
-#: Xconfig/card.pm:386
+#: Xconfig/card.pm:392
 #, c-format
 msgid "Configure all heads independently"
 msgstr "独立配置所有头"
 
-#: Xconfig/card.pm:387
+#: Xconfig/card.pm:393
 #, c-format
 msgid "Use Xinerama extension"
 msgstr "使用 Xinerama 扩展"
 
-#: Xconfig/card.pm:392
+#: Xconfig/card.pm:398
 #, c-format
 msgid "Configure only card \"%s\"%s"
 msgstr "只配置“%s”%s 卡"
 
-#: Xconfig/card.pm:404 Xconfig/various.pm:23
+#: Xconfig/card.pm:410 Xconfig/various.pm:23
 #, c-format
 msgid "Xorg %s"
 msgstr "Xorg %s"
 
-#: Xconfig/card.pm:411 Xconfig/various.pm:22
+#: Xconfig/card.pm:417 Xconfig/various.pm:22
 #, c-format
 msgid "Xorg %s with 3D hardware acceleration"
 msgstr "Xorg %s 带有硬件 3D 加速的支持"
 
-#: Xconfig/card.pm:413
+#: Xconfig/card.pm:419
 #, c-format
 msgid "Your card can have 3D hardware acceleration support with Xorg %s."
 msgstr "使用 Xorg %s, 您的显示卡可以得到 3D 硬件加速支持。"
 
-#: Xconfig/card.pm:419
+#: Xconfig/card.pm:425
 #, c-format
 msgid "Xorg %s with EXPERIMENTAL 3D hardware acceleration"
 msgstr "Xorg %s 带有试验阶段的 3D 硬件加速支持"
 
-#: Xconfig/card.pm:421
+#: Xconfig/card.pm:427
 #, c-format
 msgid ""
 "Your card can have 3D hardware acceleration support with Xorg %s,\n"
@@ -475,8 +475,8 @@ msgstr "自定义"
 #: install_steps_interactive.pm:86 install_steps_interactive.pm:1326
 #: printer/printerdrake.pm:882 printer/printerdrake.pm:899
 #: printer/printerdrake.pm:4701 printer/printerdrake.pm:5165
-#: standalone/drakhosts:263 standalone/drakroam:168 standalone/draksplash:93
-#: standalone/logdrake:176 standalone/net_applet:82
+#: standalone/drakhosts:263 standalone/drakroam:230 standalone/draksplash:93
+#: standalone/logdrake:176 standalone/net_applet:102
 #: standalone/scannerdrake:477
 #, c-format
 msgid "Quit"
@@ -649,7 +649,7 @@ msgid "Ok"
 msgstr "确定"
 
 #: Xconfig/resolution_and_depth.pm:373 diskdrake/smbnfs_gtk.pm:80 help.pm:89
-#: help.pm:444 install_steps_gtk.pm:458 install_steps_interactive.pm:429
+#: help.pm:444 install_steps_gtk.pm:455 install_steps_interactive.pm:429
 #: install_steps_interactive.pm:834 interactive.pm:120 interactive.pm:437
 #: interactive/http.pm:104 interactive/http.pm:160 interactive/newt.pm:318
 #: interactive/stdio.pm:39 interactive/stdio.pm:142
@@ -666,7 +666,7 @@ msgid "Cancel"
 msgstr "取消"
 
 #: Xconfig/resolution_and_depth.pm:373 diskdrake/hd_gtk.pm:150
-#: install_steps_gtk.pm:232 install_steps_gtk.pm:620 interactive.pm:567
+#: install_steps_gtk.pm:232 install_steps_gtk.pm:617 interactive.pm:567
 #: interactive/gtk.pm:681 interactive/gtk.pm:683 standalone/drakTermServ:284
 #: standalone/drakbackup:3897 standalone/drakbug:105
 #: standalone/drakconnect:153 standalone/drakconnect:236
@@ -817,8 +817,8 @@ msgstr "其它"
 
 #: any.pm:142 harddrake/sound.pm:192 interactive.pm:474 pkgs.pm:473
 #: standalone/drakconnect:160 standalone/drakconnect:635 standalone/draksec:68
-#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:246
-#: standalone/service_harddrake:207
+#: standalone/drakups:101 standalone/drakxtv:92 standalone/harddrake2:356
+#: standalone/service_harddrake:206
 #, c-format
 msgid "Please wait"
 msgstr "请稍候"
@@ -1360,7 +1360,7 @@ msgid "Input method:"
 msgstr "输入法:"
 
 #: any.pm:856 install_any.pm:417 network/netconnect.pm:306
-#: network/netconnect.pm:311 network/netconnect.pm:1205 network/wireless.pm:7
+#: network/netconnect.pm:311 network/netconnect.pm:1206 network/wireless.pm:7
 #: printer/printerdrake.pm:105 printer/printerdrake.pm:2430
 #, c-format
 msgid "None"
@@ -1751,31 +1751,31 @@ msgstr "文本菜单 GRUB"
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: bootloader.pm:986
+#: bootloader.pm:985
 #, c-format
 msgid "not enough room in /boot"
 msgstr "/boot 中没有足够空间"
 
-#: bootloader.pm:1476
+#: bootloader.pm:1475
 #, c-format
 msgid "You can not install the bootloader on a %s partition\n"
 msgstr "%s 分区不能安装启动引导程序\n"
 
-#: bootloader.pm:1516
+#: bootloader.pm:1515
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "必须更新您的启动引导程序配置, 因为分区已经重新编号"
 
-#: bootloader.pm:1529
+#: bootloader.pm:1528
 #, c-format
 msgid ""
 "The bootloader can not be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "无法正确安装启动引导程序。您需要以抢救方式启动并选择“%s”"
 
-#: bootloader.pm:1530
+#: bootloader.pm:1529
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安装启动引导程序"
@@ -2113,7 +2113,7 @@ msgstr ""
 msgid "Please click on a partition"
 msgstr "请单击一个分区"
 
-#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:460
+#: diskdrake/hd_gtk.pm:205 diskdrake/smbnfs_gtk.pm:62 install_steps_gtk.pm:457
 #: standalone/drakbackup:2952 standalone/drakbackup:3012
 #, c-format
 msgid "Details"
@@ -2850,7 +2850,7 @@ msgstr "大小: %s\n"
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "硬盘参数: %s 柱面, %s 磁头, %s 扇区\n"
 
-#: diskdrake/interactive.pm:1275 network/thirdparty.pm:316
+#: diskdrake/interactive.pm:1275 network/thirdparty.pm:329
 #, c-format
 msgid "Info: "
 msgstr "信息: "
@@ -2890,8 +2890,8 @@ msgstr "这个加密密钥太简单了(至少要有 %d 个字符)"
 msgid "The encryption keys do not match"
 msgstr "两次加密密钥不符"
 
-#: diskdrake/interactive.pm:1329 network/netconnect.pm:1041
-#: standalone/drakconnect:419 standalone/drakroam:112
+#: diskdrake/interactive.pm:1329 network/netconnect.pm:1042
+#: standalone/drakconnect:419 standalone/drakroam:120
 #, c-format
 msgid "Encryption key"
 msgstr "加密密钥"
@@ -2980,14 +2980,14 @@ msgstr "无法找到必需的软件包 %s"
 #: standalone/drakTermServ:1266 standalone/drakTermServ:1931
 #: standalone/drakbackup:497 standalone/drakbackup:596 standalone/drakboot:133
 #: standalone/drakclock:224 standalone/drakconnect:973 standalone/drakperm:380
-#: standalone/drakperm:390 standalone/drakups:27 standalone/harddrake2:479
+#: standalone/drakperm:390 standalone/drakups:27 standalone/harddrake2:489
 #: standalone/localedrake:43 standalone/scannerdrake:51
 #: standalone/scannerdrake:940
 #, c-format
 msgid "Warning"
 msgstr "警告"
 
-#: do_pkgs.pm:35 standalone/drakbackup:4109 standalone/harddrake2:479
+#: do_pkgs.pm:35 standalone/drakbackup:4109 standalone/harddrake2:489
 #, c-format
 msgid "The following packages need to be installed:\n"
 msgstr "下列软件包需要安装: \n"
@@ -3473,7 +3473,7 @@ msgstr "UPS"
 msgid "Scanner"
 msgstr "扫描仪"
 
-#: harddrake/data.pm:502 standalone/harddrake2:442
+#: harddrake/data.pm:502 standalone/harddrake2:454
 #, c-format
 msgid "Unknown/Others"
 msgstr "未知/其它"
@@ -3770,7 +3770,7 @@ msgstr ""
 "版。如果您同意其中的全部条款, 请选中\"%s\"框。如果不同意, 单击\"%s\"按钮将重"
 "新启动您的计算机。"
 
-#: help.pm:14 install_steps_gtk.pm:542 install_steps_interactive.pm:92
+#: help.pm:14 install_steps_gtk.pm:539 install_steps_interactive.pm:92
 #: install_steps_interactive.pm:738 standalone/drakautoinst:214
 #, c-format
 msgid "Accept"
@@ -3851,8 +3851,8 @@ msgid "User name"
 msgstr "用户名"
 
 #: help.pm:51 help.pm:431 help.pm:681 install_steps_gtk.pm:237
-#: install_steps_gtk.pm:685 interactive.pm:436 interactive/newt.pm:321
-#: network/thirdparty.pm:370 printer/printerdrake.pm:3973
+#: install_steps_gtk.pm:682 interactive.pm:436 interactive/newt.pm:321
+#: network/thirdparty.pm:383 printer/printerdrake.pm:3973
 #: standalone/drakTermServ:384 standalone/drakbackup:3954
 #: standalone/drakbackup:4048 standalone/drakbackup:4065
 #: standalone/drakbackup:4083 ugtk2.pm:490
@@ -4154,7 +4154,7 @@ msgstr ""
 
 #: help.pm:180 help.pm:285 help.pm:313 help.pm:444 install_any.pm:939
 #: interactive.pm:161 modules/interactive.pm:71 standalone/drakbackup:2517
-#: standalone/draksec:54 standalone/harddrake2:309 ugtk2.pm:898 wizards.pm:156
+#: standalone/draksec:54 standalone/harddrake2:312 ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "No"
 msgstr "否"
@@ -4162,7 +4162,7 @@ msgstr "否"
 #: help.pm:180 help.pm:285 help.pm:444 install_any.pm:939 interactive.pm:161
 #: modules/interactive.pm:71 printer/printerdrake.pm:883
 #: printer/printerdrake.pm:898 standalone/drakbackup:2517
-#: standalone/draksec:55 standalone/harddrake2:308 ugtk2.pm:898 wizards.pm:156
+#: standalone/draksec:55 standalone/harddrake2:311 ugtk2.pm:898 wizards.pm:156
 #, c-format
 msgid "Yes"
 msgstr "是"
@@ -4185,10 +4185,10 @@ msgstr ""
 "节, 其中详细描述了如何设置新打印机。那里给出的界面与安装时所用的界面大体相"
 "同。"
 
-#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:598
+#: help.pm:186 help.pm:566 help.pm:855 install_steps_gtk.pm:595
 #: standalone/drakbackup:2341 standalone/drakbackup:2345
 #: standalone/drakbackup:2349 standalone/drakbackup:2353
-#: standalone/drakroam:165
+#: standalone/drakroam:227
 #, c-format
 msgid "Configure"
 msgstr "配置"
@@ -5716,7 +5716,7 @@ msgstr ""
 "无法读取与您的内核配套的内核模块(缺少文件 %s), 通常是因为启动软盘与安装介质不"
 "配套(请制作新的启动盘)"
 
-#: install2.pm:168
+#: install2.pm:169
 #, c-format
 msgid "You must also format %s"
 msgstr "您还必须格式化 %s"
@@ -5768,7 +5768,7 @@ msgstr "网络 (NFS)"
 msgid "Insert the CD 1 again"
 msgstr "再次插入第一张光盘"
 
-#: install_any.pm:473 network/netconnect.pm:834 standalone/drakbackup:112
+#: install_any.pm:473 network/netconnect.pm:835 standalone/drakbackup:112
 #, c-format
 msgid "No device found"
 msgstr "没有发现设备"
@@ -6466,7 +6466,7 @@ msgstr ""
 msgid "Duplicate mount point %s"
 msgstr "重复的挂载点 %s"
 
-#: install_steps.pm:475
+#: install_steps.pm:481
 #, c-format
 msgid ""
 "Some important packages did not get installed properly.\n"
@@ -6535,7 +6535,7 @@ msgstr "重要程度: "
 msgid "You can not select/unselect this package"
 msgstr "您不能改变这个软件包的选定"
 
-#: install_steps_gtk.pm:340 network/thirdparty.pm:316
+#: install_steps_gtk.pm:340 network/thirdparty.pm:329
 #, c-format
 msgid "due to missing %s"
 msgstr "由于缺少 %s"
@@ -6626,33 +6626,33 @@ msgstr "选择您想要安装的软件包"
 msgid "Installing"
 msgstr "正在安装"
 
-#: install_steps_gtk.pm:460
+#: install_steps_gtk.pm:457
 #, c-format
 msgid "No details"
 msgstr "无细节"
 
-#: install_steps_gtk.pm:475
+#: install_steps_gtk.pm:472
 #, c-format
 msgid "Time remaining "
 msgstr "剩余时间"
 
-#: install_steps_gtk.pm:476
+#: install_steps_gtk.pm:473
 #, c-format
 msgid "Estimating"
 msgstr "正在估计"
 
-#: install_steps_gtk.pm:503
+#: install_steps_gtk.pm:500
 #, c-format
 msgid "%d packages"
 msgstr "%d 个软件包"
 
-#: install_steps_gtk.pm:542 install_steps_interactive.pm:92
+#: install_steps_gtk.pm:539 install_steps_interactive.pm:92
 #: install_steps_interactive.pm:738
 #, c-format
 msgid "Refuse"
 msgstr "拒绝"
 
-#: install_steps_gtk.pm:546 install_steps_interactive.pm:742
+#: install_steps_gtk.pm:543 install_steps_interactive.pm:742
 #, c-format
 msgid ""
 "Change your Cd-Rom!\n"
@@ -6665,34 +6665,34 @@ msgstr ""
 "请在驱动器中插入标有“%s”的光盘, 然后单击“确定”。\n"
 "如果您没有这张光盘, 请单击“取消”, 放弃安装这张光盘上的软件。"
 
-#: install_steps_gtk.pm:559 install_steps_interactive.pm:753
+#: install_steps_gtk.pm:556 install_steps_interactive.pm:753
 #, c-format
 msgid "There was an error ordering packages:"
 msgstr "排列软件包时出错: "
 
-#: install_steps_gtk.pm:561 install_steps_interactive.pm:757
+#: install_steps_gtk.pm:558 install_steps_interactive.pm:757
 #, c-format
 msgid "There was an error installing packages:"
 msgstr "安装软件包时出错: "
 
-#: install_steps_gtk.pm:563 install_steps_interactive.pm:753
+#: install_steps_gtk.pm:560 install_steps_interactive.pm:753
 #: install_steps_interactive.pm:757
 #, c-format
 msgid "Go on anyway?"
 msgstr "真的要继续?"
 
-#: install_steps_gtk.pm:585 install_steps_interactive.pm:933 steps.pm:30
+#: install_steps_gtk.pm:582 install_steps_interactive.pm:933 steps.pm:30
 #, c-format
 msgid "Summary"
 msgstr "概要"
 
-#: install_steps_gtk.pm:608 install_steps_interactive.pm:929
+#: install_steps_gtk.pm:605 install_steps_interactive.pm:929
 #: install_steps_interactive.pm:1078
 #, c-format
 msgid "not configured"
 msgstr "未配置"
 
-#: install_steps_gtk.pm:671
+#: install_steps_gtk.pm:668
 #, c-format
 msgid ""
 "The following installation media have been found.\n"
@@ -6701,7 +6701,7 @@ msgstr ""
 "找到了下列安装介质。\n"
 "如果您想要跳过其中一些, 请不要选中。"
 
-#: install_steps_gtk.pm:680
+#: install_steps_gtk.pm:677
 #, c-format
 msgid ""
 "You have the option to copy the contents of the CDs onto the hard drive "
@@ -6713,7 +6713,7 @@ msgstr ""
 "然后，安装将会从硬盘继续进行。当系统安装完成后，软件包仍然保留，以供日后添加"
 "软件使用。"
 
-#: install_steps_gtk.pm:682
+#: install_steps_gtk.pm:679
 #, c-format
 msgid "Copy whole CDs"
 msgstr "复制整张光盘"
@@ -9817,8 +9817,8 @@ msgstr "其它端口"
 #: network/drakfirewall.pm:251 network/drakfirewall.pm:254
 #: standalone/drakids:33 standalone/drakids:136 standalone/drakids:145
 #: standalone/drakids:170 standalone/drakids:179 standalone/drakids:189
-#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:180
-#: standalone/net_applet:354 standalone/net_applet:391
+#: standalone/drakids:265 standalone/net_applet:59 standalone/net_applet:201
+#: standalone/net_applet:379 standalone/net_applet:416
 #, c-format
 msgid "Interactive Firewall"
 msgstr "交互式防火墙"
@@ -9962,7 +9962,7 @@ msgstr "内置 ISDN 卡"
 msgid "Manual configuration"
 msgstr "手工配置"
 
-#: network/netconnect.pm:81 standalone/drakroam:113
+#: network/netconnect.pm:81 standalone/drakroam:121
 #, c-format
 msgid "Automatic IP (BOOTP/DHCP)"
 msgstr "自动 IP(BOOTP/DHCP)"
@@ -9991,14 +9991,14 @@ msgstr ""
 "世界其它地区的协议\n"
 "没有 D-信道(专线)"
 
-#: network/netconnect.pm:103 standalone/harddrake2:306
+#: network/netconnect.pm:103 standalone/harddrake2:309
 #: standalone/net_monitor:102 standalone/net_monitor:103
 #: standalone/net_monitor:108
 #, c-format
 msgid "unknown"
 msgstr "未知"
 
-#: network/netconnect.pm:120 network/thirdparty.pm:206
+#: network/netconnect.pm:120 network/thirdparty.pm:219
 #, c-format
 msgid "Alcatel speedtouch USB modem"
 msgstr "阿尔卡特 Speedtouch USB 调制解调器"
@@ -10113,8 +10113,8 @@ msgstr "网络和 Internet 配置"
 msgid "LAN connection"
 msgstr "局域网连接"
 
-#: network/netconnect.pm:246 network/netconnect.pm:265 standalone/drakroam:140
-#: standalone/drakroam:158 standalone/drakroam:161
+#: network/netconnect.pm:246 network/netconnect.pm:265 standalone/drakroam:182
+#: standalone/drakroam:220 standalone/drakroam:223
 #, c-format
 msgid "Wireless connection"
 msgstr "无线连接"
@@ -10248,13 +10248,13 @@ msgid "Use BPALogin (needed for Telstra)"
 msgstr "使用 BPALogin (Telstra 需要)"
 
 #: network/netconnect.pm:337 network/netconnect.pm:654
-#: network/netconnect.pm:804 network/netconnect.pm:1138
+#: network/netconnect.pm:805 network/netconnect.pm:1139
 #, c-format
 msgid "Select the network interface to configure:"
 msgstr "选择要配置的网卡: "
 
 #: network/netconnect.pm:339 network/netconnect.pm:374
-#: network/netconnect.pm:655 network/netconnect.pm:806 network/shorewall.pm:65
+#: network/netconnect.pm:655 network/netconnect.pm:807 network/shorewall.pm:70
 #: standalone/drakconnect:713
 #, c-format
 msgid "Net Device"
@@ -10408,10 +10408,10 @@ msgstr "拨号: IP 参数"
 msgid "IP parameters"
 msgstr "IP 参数"
 
-#: network/netconnect.pm:586 network/netconnect.pm:909
+#: network/netconnect.pm:586 network/netconnect.pm:910
 #: printer/printerdrake.pm:460 standalone/drakconnect:109
 #: standalone/drakconnect:316 standalone/drakconnect:882
-#: standalone/drakhosts:197 standalone/drakroam:114 standalone/drakups:286
+#: standalone/drakhosts:197 standalone/drakroam:122 standalone/drakups:286
 #, c-format
 msgid "IP address"
 msgstr "IP 地址"
@@ -10458,7 +10458,7 @@ msgstr "由 IP 设置主机名"
 msgid "Gateway"
 msgstr "网关"
 
-#: network/netconnect.pm:619 standalone/drakroam:116
+#: network/netconnect.pm:619 standalone/drakroam:124
 #, c-format
 msgid "Gateway IP address"
 msgstr "网关 IP 地址"
@@ -10502,34 +10502,34 @@ msgstr "虚拟电路 ID (VCI):"
 msgid "Encapsulation:"
 msgstr "封装: "
 
-#: network/netconnect.pm:808
+#: network/netconnect.pm:809
 #, c-format
 msgid "Manually load a driver"
 msgstr "手动装入驱动程序"
 
-#: network/netconnect.pm:809
+#: network/netconnect.pm:810
 #, c-format
 msgid "Use a Windows driver (with ndiswrapper)"
 msgstr "使用 Windows 驱动程序(通过 ndiswrapper)"
 
-#: network/netconnect.pm:865
+#: network/netconnect.pm:866
 #, c-format
 msgid "Zeroconf hostname resolution"
 msgstr "Zeroconf 主机名解析"
 
-#: network/netconnect.pm:866 network/netconnect.pm:896
+#: network/netconnect.pm:867 network/netconnect.pm:897
 #, c-format
 msgid "Configuring network device %s (driver %s)"
 msgstr "配置网络设备 %s(驱动程序 %s)"
 
-#: network/netconnect.pm:867
+#: network/netconnect.pm:868
 #, c-format
 msgid ""
 "The following protocols can be used to configure a LAN connection. Please "
 "choose the one you want to use"
 msgstr "您可使用下列协议配置局域网连接。请选择您想要使用的协议"
 
-#: network/netconnect.pm:897
+#: network/netconnect.pm:898
 #, c-format
 msgid ""
 "Please enter the IP configuration for this machine.\n"
@@ -10540,197 +10540,198 @@ msgstr ""
 "下列项目要求以句点分隔十进制格式输入的 IP 地址。\n"
 "(例如, 1.2.3.4)"
 
-#: network/netconnect.pm:904 standalone/drakconnect:373
+#: network/netconnect.pm:905 standalone/drakconnect:373
 #, c-format
 msgid "Assign host name from DHCP address"
 msgstr "从 DHCP 地址指定主机名"
 
-#: network/netconnect.pm:905 standalone/drakconnect:375
+#: network/netconnect.pm:906 standalone/drakconnect:375
 #, c-format
 msgid "DHCP host name"
 msgstr "DHCP 主机名"
 
-#: network/netconnect.pm:910 standalone/drakconnect:321
+#: network/netconnect.pm:911 standalone/drakconnect:321
 #: standalone/drakconnect:883 standalone/drakgw:181
 #, c-format
 msgid "Netmask"
 msgstr "子网掩码"
 
-#: network/netconnect.pm:912 standalone/drakconnect:437
+#: network/netconnect.pm:913 standalone/drakconnect:437
 #, c-format
 msgid "Track network card id (useful for laptops)"
 msgstr "跟踪网卡标志(用于笔记本电脑)"
 
-#: network/netconnect.pm:913 standalone/drakconnect:438
+#: network/netconnect.pm:914 standalone/drakconnect:438
 #, c-format
 msgid "Network Hotplugging"
 msgstr "网络热插拔"
 
-#: network/netconnect.pm:915 standalone/drakconnect:432
+#: network/netconnect.pm:916 standalone/drakconnect:432
 #, c-format
 msgid "Start at boot"
 msgstr "开机时启动"
 
-#: network/netconnect.pm:917 standalone/drakconnect:460
+#: network/netconnect.pm:918 standalone/drakconnect:460
 #, c-format
 msgid "Metric"
 msgstr "度量衡"
 
-#: network/netconnect.pm:918
+#: network/netconnect.pm:919
 #, c-format
 msgid "Enable IPv6 to IPv4 tunnel"
 msgstr "启用 IPv6 到 IPv4 的隧道"
 
-#: network/netconnect.pm:920 standalone/drakconnect:369
+#: network/netconnect.pm:921 standalone/drakconnect:369
 #: standalone/drakconnect:886
 #, c-format
 msgid "DHCP client"
 msgstr "DHCP 客户端"
 
-#: network/netconnect.pm:922 standalone/drakconnect:379
+#: network/netconnect.pm:923 standalone/drakconnect:379
 #, c-format
 msgid "DHCP timeout (in seconds)"
 msgstr "DHCP 超时(秒)"
 
-#: network/netconnect.pm:923 standalone/drakconnect:382
+#: network/netconnect.pm:924 standalone/drakconnect:382
 #, c-format
 msgid "Get DNS servers from DHCP"
 msgstr "从 DHCP 获取 DNS 服务器"
 
-#: network/netconnect.pm:924 standalone/drakconnect:383
+#: network/netconnect.pm:925 standalone/drakconnect:383
 #, c-format
 msgid "Get YP servers from DHCP"
 msgstr "从 DHCP 获取 YP 服务器"
 
-#: network/netconnect.pm:925 standalone/drakconnect:384
+#: network/netconnect.pm:926 standalone/drakconnect:384
 #, c-format
 msgid "Get NTPD servers from DHCP"
 msgstr "从 DHCP 获取 NTPD 服务器"
 
-#: network/netconnect.pm:933 printer/printerdrake.pm:1897
+#: network/netconnect.pm:934 printer/printerdrake.pm:1897
 #: standalone/drakconnect:676
 #, c-format
 msgid "IP address should be in format 1.2.3.4"
 msgstr "IP 地址的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:937 standalone/drakconnect:680
+#: network/netconnect.pm:938 standalone/drakconnect:680
 #, c-format
 msgid "Netmask should be in format 255.255.224.0"
 msgstr "子网掩码的格式应该是 255.255.224.0"
 
-#: network/netconnect.pm:941
+#: network/netconnect.pm:942
 #, c-format
 msgid "Warning: IP address %s is usually reserved!"
 msgstr "警告: IP 地址 %s 通常是被保留的！"
 
-#: network/netconnect.pm:946 standalone/drakTermServ:1852
+#: network/netconnect.pm:947 standalone/drakTermServ:1852
 #: standalone/drakTermServ:1853 standalone/drakTermServ:1854
 #, c-format
 msgid "%s already in use\n"
 msgstr "%s 已经被使用了\n"
 
-#: network/netconnect.pm:986
+#: network/netconnect.pm:987
 #, c-format
 msgid "Choose an ndiswrapper driver"
 msgstr "选择 ndiswrapper 驱动程序"
 
-#: network/netconnect.pm:988
+#: network/netconnect.pm:989
 #, c-format
 msgid "Use the ndiswrapper driver %s"
 msgstr "使用 ndiswrapper 驱动程序 %s"
 
-#: network/netconnect.pm:988
+#: network/netconnect.pm:989
 #, c-format
 msgid "Install a new driver"
 msgstr "安装新驱动程序"
 
-#: network/netconnect.pm:1000
+#: network/netconnect.pm:1001
 #, c-format
 msgid "Select a device:"
 msgstr "选择设备:"
 
-#: network/netconnect.pm:1029
+#: network/netconnect.pm:1030
 #, c-format
 msgid "Please enter the wireless parameters for this card:"
 msgstr "请选择此网卡的无线参数:"
 
-#: network/netconnect.pm:1032 standalone/drakconnect:404
+#: network/netconnect.pm:1033 standalone/drakconnect:404
+#: standalone/drakroam:52
 #, c-format
 msgid "Operating Mode"
 msgstr "操作模式"
 
-#: network/netconnect.pm:1033
+#: network/netconnect.pm:1034
 #, c-format
 msgid "Ad-hoc"
 msgstr "Ad-hoc"
 
-#: network/netconnect.pm:1033
+#: network/netconnect.pm:1034
 #, c-format
 msgid "Managed"
 msgstr "受控的"
 
-#: network/netconnect.pm:1033
+#: network/netconnect.pm:1034
 #, c-format
 msgid "Master"
 msgstr "主要的"
 
-#: network/netconnect.pm:1033
+#: network/netconnect.pm:1034
 #, c-format
 msgid "Repeater"
 msgstr "转发器"
 
-#: network/netconnect.pm:1033
+#: network/netconnect.pm:1034
 #, c-format
 msgid "Secondary"
 msgstr "次要的"
 
-#: network/netconnect.pm:1033
+#: network/netconnect.pm:1034
 #, c-format
 msgid "Auto"
 msgstr "自动"
 
-#: network/netconnect.pm:1036 standalone/drakconnect:405
-#: standalone/drakroam:107
+#: network/netconnect.pm:1037 standalone/drakconnect:405
+#: standalone/drakroam:115
 #, c-format
 msgid "Network name (ESSID)"
 msgstr "网络名称(ESSID)"
 
-#: network/netconnect.pm:1037 standalone/drakroam:108
+#: network/netconnect.pm:1038 standalone/drakroam:116
 #, c-format
 msgid "Encryption mode"
 msgstr "加密模式"
 
-#: network/netconnect.pm:1042
+#: network/netconnect.pm:1043
 #, c-format
 msgid "Allow access point roaming"
 msgstr "允许访问点漫游"
 
-#: network/netconnect.pm:1044 standalone/drakconnect:406
+#: network/netconnect.pm:1045 standalone/drakconnect:406
 #, c-format
 msgid "Network ID"
 msgstr "网络 ID"
 
-#: network/netconnect.pm:1045 standalone/drakconnect:407
+#: network/netconnect.pm:1046 standalone/drakconnect:407
 #, c-format
 msgid "Operating frequency"
 msgstr "运行频率"
 
-#: network/netconnect.pm:1046 standalone/drakconnect:408
+#: network/netconnect.pm:1047 standalone/drakconnect:408
 #, c-format
 msgid "Sensitivity threshold"
 msgstr "灵敏度阀值"
 
-#: network/netconnect.pm:1047 standalone/drakconnect:409
+#: network/netconnect.pm:1048 standalone/drakconnect:409
 #, c-format
 msgid "Bitrate (in b/s)"
 msgstr "比特率(每秒比特数, b/s)"
 
-#: network/netconnect.pm:1048 standalone/drakconnect:420
+#: network/netconnect.pm:1049 standalone/drakconnect:420
 #, c-format
 msgid "RTS/CTS"
 msgstr "RTS/CTS"
 
-#: network/netconnect.pm:1049
+#: network/netconnect.pm:1050
 #, c-format
 msgid ""
 "RTS/CTS adds a handshake before each packet transmission to make sure that "
@@ -10749,17 +10750,17 @@ msgstr ""
 "包\n"
 "的大小, 一个等于中止计划的值的大小。您也可以设置这个值为自动、固定或者关闭。"
 
-#: network/netconnect.pm:1056 standalone/drakconnect:421
+#: network/netconnect.pm:1057 standalone/drakconnect:421
 #, c-format
 msgid "Fragmentation"
 msgstr "块"
 
-#: network/netconnect.pm:1057 standalone/drakconnect:422
+#: network/netconnect.pm:1058 standalone/drakconnect:422
 #, c-format
 msgid "iwconfig command extra arguments"
 msgstr "iwconfig 命令的额外参数"
 
-#: network/netconnect.pm:1058
+#: network/netconnect.pm:1059
 #, c-format
 msgid ""
 "Here, one can configure some extra wireless parameters such as:\n"
@@ -10775,12 +10776,12 @@ msgstr ""
 "请参看 iwconfig(8) man page 中的更多信息。"
 
 #. -PO: split the "xyz command extra argument" translated string into two lines if it's bigger than the english one
-#: network/netconnect.pm:1065 standalone/drakconnect:423
+#: network/netconnect.pm:1066 standalone/drakconnect:423
 #, c-format
 msgid "iwspy command extra arguments"
 msgstr "iwspy 命令的额外参数"
 
-#: network/netconnect.pm:1066
+#: network/netconnect.pm:1067
 #, c-format
 msgid ""
 "iwspy is used to set a list of addresses in a wireless network\n"
@@ -10798,12 +10799,12 @@ msgstr ""
 "\n"
 "请参看 iwpspy(8) man page 中的更多信息。"
 
-#: network/netconnect.pm:1075 standalone/drakconnect:424
+#: network/netconnect.pm:1076 standalone/drakconnect:424
 #, c-format
 msgid "iwpriv command extra arguments"
 msgstr "iwpriv 命令的额外参数"
 
-#: network/netconnect.pm:1076
+#: network/netconnect.pm:1077
 #, c-format
 msgid ""
 "iwpriv enable to set up optionals (private) parameters of a wireless "
@@ -10832,7 +10833,7 @@ msgstr ""
 "\n"
 "请参看 iwpriv(8) man page 中的更多信息。"
 
-#: network/netconnect.pm:1091
+#: network/netconnect.pm:1092
 #, c-format
 msgid ""
 "Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
@@ -10841,44 +10842,44 @@ msgstr ""
 "频率应该有后缀 k, M 或 G(如“2.46G”代表 2.46 GHz 频率), 或者后带足够"
 "的“0”(零)。"
 
-#: network/netconnect.pm:1095
+#: network/netconnect.pm:1096
 #, c-format
 msgid ""
 "Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
 "enough '0' (zeroes)."
 msgstr "速度应该有后缀 k, M 或 G(如“11M”代表 11M), 或者后带足够的“0”(零)。"
 
-#: network/netconnect.pm:1138
+#: network/netconnect.pm:1139
 #, c-format
 msgid "DVB configuration"
 msgstr "DVB 配置"
 
-#: network/netconnect.pm:1139
+#: network/netconnect.pm:1140
 #, c-format
 msgid "DVB Adapter"
 msgstr "DVB 适配器"
 
-#: network/netconnect.pm:1156
+#: network/netconnect.pm:1157
 #, c-format
 msgid "DVB adapter settings"
 msgstr "DVB 适配器设置"
 
-#: network/netconnect.pm:1159
+#: network/netconnect.pm:1160
 #, c-format
 msgid "Adapter card"
 msgstr "适配卡"
 
-#: network/netconnect.pm:1160
+#: network/netconnect.pm:1161
 #, c-format
 msgid "Net demux"
 msgstr "网络互斥"
 
-#: network/netconnect.pm:1161
+#: network/netconnect.pm:1162
 #, c-format
 msgid "PID"
 msgstr "PID"
 
-#: network/netconnect.pm:1189
+#: network/netconnect.pm:1190
 #, c-format
 msgid ""
 "Please enter your host name.\n"
@@ -10890,67 +10891,67 @@ msgstr ""
 "您的主机名称必需是个完全限定的名称, 例如“mybox.mylab.myco.com”。\n"
 "如果您有网关的话, 也请输入其 IP 地址。"
 
-#: network/netconnect.pm:1194
+#: network/netconnect.pm:1195
 #, c-format
 msgid "Last but not least you can also type in your DNS server IP addresses."
 msgstr "最后, 您还应该至少输入您 DNS 服务器的 IP 地址。"
 
-#: network/netconnect.pm:1196 standalone/drakconnect:991
+#: network/netconnect.pm:1197 standalone/drakconnect:991
 #, c-format
 msgid "Host name (optional)"
 msgstr "主机名(可选)"
 
-#: network/netconnect.pm:1196 standalone/drakhosts:197
+#: network/netconnect.pm:1197 standalone/drakhosts:197
 #, c-format
 msgid "Host name"
 msgstr "主机名"
 
-#: network/netconnect.pm:1198
+#: network/netconnect.pm:1199
 #, c-format
 msgid "DNS server 1"
 msgstr "DNS 服务器 1"
 
-#: network/netconnect.pm:1199
+#: network/netconnect.pm:1200
 #, c-format
 msgid "DNS server 2"
 msgstr "DNS 服务器 2"
 
-#: network/netconnect.pm:1200
+#: network/netconnect.pm:1201
 #, c-format
 msgid "DNS server 3"
 msgstr "DNS 服务器 3"
 
-#: network/netconnect.pm:1201
+#: network/netconnect.pm:1202
 #, c-format
 msgid "Search domain"
 msgstr "搜索网域"
 
-#: network/netconnect.pm:1202
+#: network/netconnect.pm:1203
 #, c-format
 msgid "By default search domain will be set from the fully-qualified host name"
 msgstr "默认情况下, 搜索域名将会根据完全限定的主机名进行设定"
 
-#: network/netconnect.pm:1203
+#: network/netconnect.pm:1204
 #, c-format
 msgid "Gateway (e.g. %s)"
 msgstr "网关(如 %s)"
 
-#: network/netconnect.pm:1205
+#: network/netconnect.pm:1206
 #, c-format
 msgid "Gateway device"
 msgstr "网关设备"
 
-#: network/netconnect.pm:1214
+#: network/netconnect.pm:1215
 #, c-format
 msgid "DNS server address should be in format 1.2.3.4"
 msgstr "DNS 服务器的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:1219 standalone/drakconnect:685
+#: network/netconnect.pm:1220 standalone/drakconnect:685
 #, c-format
 msgid "Gateway address should be in format 1.2.3.4"
 msgstr "网关地址的格式应该是 1.2.3.4"
 
-#: network/netconnect.pm:1232
+#: network/netconnect.pm:1233
 #, c-format
 msgid ""
 "If desired, enter a Zeroconf hostname.\n"
@@ -10962,67 +10963,67 @@ msgstr ""
 "这将被您的计算机用于通知其未被网络管理的共享资源。\n"
 "大多数网络中不需要此设置。"
 
-#: network/netconnect.pm:1236
+#: network/netconnect.pm:1237
 #, c-format
 msgid "Zeroconf Host name"
 msgstr "Zeroconf 主机名"
 
-#: network/netconnect.pm:1239
+#: network/netconnect.pm:1240
 #, c-format
 msgid "Zeroconf host name must not contain a ."
 msgstr "Zeroconf 主机名不能包含“.”"
 
-#: network/netconnect.pm:1249
+#: network/netconnect.pm:1250
 #, c-format
 msgid "Do you want to allow users to start the connection?"
 msgstr "您是否希望允许用户启动连接?"
 
-#: network/netconnect.pm:1262
+#: network/netconnect.pm:1263
 #, c-format
 msgid "Do you want to start the connection at boot?"
 msgstr "您是否希望一开机就启动连接?"
 
-#: network/netconnect.pm:1278
+#: network/netconnect.pm:1279
 #, c-format
 msgid "Automatically at boot"
 msgstr "开机时自动启动"
 
-#: network/netconnect.pm:1280
+#: network/netconnect.pm:1281
 #, c-format
 msgid "By using Net Applet in the system tray"
 msgstr "使用系统脱盘中的网络小程序"
 
-#: network/netconnect.pm:1282
+#: network/netconnect.pm:1283
 #, c-format
 msgid "Manually (the interface would still be activated at boot)"
 msgstr "手动(启动时仍会激活网卡)"
 
-#: network/netconnect.pm:1291
+#: network/netconnect.pm:1292
 #, c-format
 msgid "How do you want to dial this connection?"
 msgstr "您想要如何拨打此连接?"
 
-#: network/netconnect.pm:1304
+#: network/netconnect.pm:1305
 #, c-format
 msgid "Do you want to try to connect to the Internet now?"
 msgstr "您想要测试连接到 Internet 吗?"
 
-#: network/netconnect.pm:1312 standalone/drakconnect:1023
+#: network/netconnect.pm:1313 standalone/drakconnect:1023
 #, c-format
 msgid "Testing your connection..."
 msgstr "正在测试您的连接..."
 
-#: network/netconnect.pm:1332
+#: network/netconnect.pm:1333
 #, c-format
 msgid "The system is now connected to the Internet."
 msgstr "您的系统现在正连接到 Internet。"
 
-#: network/netconnect.pm:1333
+#: network/netconnect.pm:1334
 #, c-format
 msgid "For security reasons, it will be disconnected now."
 msgstr "由于安全原因, 现在将断开连接。"
 
-#: network/netconnect.pm:1334
+#: network/netconnect.pm:1335
 #, c-format
 msgid ""
 "The system does not seem to be connected to the Internet.\n"
@@ -11031,7 +11032,7 @@ msgstr ""
 "看来系统没有连接到 Internet。\n"
 "请重新尝试配置您的连接。"
 
-#: network/netconnect.pm:1349
+#: network/netconnect.pm:1350
 #, c-format
 msgid ""
 "Congratulations, the network and Internet configuration is finished.\n"
@@ -11040,14 +11041,14 @@ msgstr ""
 "恭喜, 网络和 Internet 配置完成。\n"
 "\n"
 
-#: network/netconnect.pm:1352
+#: network/netconnect.pm:1353
 #, c-format
 msgid ""
 "After this is done, we recommend that you restart your X environment to "
 "avoid any hostname-related problems."
 msgstr "建议重启动 X 环境以避免任何与主机名有关的问题。"
 
-#: network/netconnect.pm:1353
+#: network/netconnect.pm:1354
 #, c-format
 msgid ""
 "Problems occurred during configuration.\n"
@@ -11058,28 +11059,28 @@ msgstr ""
 "请从网络监视器或者控制中心测试您的连接。如果您的连接不工作, 您可能想要重新配"
 "置。"
 
-#: network/netconnect.pm:1364
+#: network/netconnect.pm:1365
 #, c-format
 msgid "(detected on port %s)"
 msgstr "(在端口 %s 检测到)"
 
 #. -PO: here, "(detected)" string will be appended to eg "ADSL connection"
-#: network/netconnect.pm:1366
+#: network/netconnect.pm:1367
 #, c-format
 msgid "(detected %s)"
 msgstr "(检测到 %s)"
 
-#: network/netconnect.pm:1366
+#: network/netconnect.pm:1367
 #, c-format
 msgid "(detected)"
 msgstr "(检测到)"
 
-#: network/netconnect.pm:1367
+#: network/netconnect.pm:1368
 #, c-format
 msgid "Network Configuration"
 msgstr "网络配置"
 
-#: network/netconnect.pm:1368
+#: network/netconnect.pm:1369
 #, c-format
 msgid ""
 "Because you are doing a network installation, your network is already "
@@ -11090,12 +11091,12 @@ msgstr ""
 "由于您正在执行网络安装, 您的网络已经配置好了。\n"
 "单击“确定”保存配置, 或“取消”重新配置网络。\n"
 
-#: network/netconnect.pm:1371
+#: network/netconnect.pm:1372
 #, c-format
 msgid "The network needs to be restarted. Do you want to restart it?"
 msgstr "网络需要重新启动。您要重新启动吗?"
 
-#: network/netconnect.pm:1372
+#: network/netconnect.pm:1373
 #, c-format
 msgid ""
 "A problem occurred while restarting the network: \n"
@@ -11106,7 +11107,7 @@ msgstr ""
 "\n"
 "%s"
 
-#: network/netconnect.pm:1373
+#: network/netconnect.pm:1374
 #, c-format
 msgid ""
 "We are now going to configure the %s connection.\n"
@@ -11119,12 +11120,12 @@ msgstr ""
 "\n"
 "按“%s”继续。"
 
-#: network/netconnect.pm:1374
+#: network/netconnect.pm:1375
 #, c-format
 msgid "Configuration is complete, do you want to apply settings?"
 msgstr "配置完成, 您想要应用设置吗?"
 
-#: network/netconnect.pm:1375
+#: network/netconnect.pm:1376
 #, c-format
 msgid ""
 "You have configured multiple ways to connect to the Internet.\n"
@@ -11135,12 +11136,12 @@ msgstr ""
 "选择您要使用的一种。\n"
 "\n"
 
-#: network/netconnect.pm:1376
+#: network/netconnect.pm:1377
 #, c-format
 msgid "Internet connection"
 msgstr "Internet 连接"
 
-#: network/netconnect.pm:1393
+#: network/netconnect.pm:1394
 #, c-format
 msgid ""
 "An unexpected error has happened:\n"
@@ -11149,32 +11150,32 @@ msgstr ""
 "发生了意外错误: \n"
 "%s"
 
-#: network/network.pm:403 network/network.pm:404
+#: network/network.pm:409 network/network.pm:410
 #, c-format
 msgid "Proxies configuration"
 msgstr "代理服务器配置"
 
-#: network/network.pm:405
+#: network/network.pm:411
 #, c-format
 msgid "HTTP proxy"
 msgstr "HTTP 代理服务器"
 
-#: network/network.pm:406
+#: network/network.pm:412
 #, c-format
 msgid "FTP proxy"
 msgstr "FTP 代理服务器"
 
-#: network/network.pm:409
+#: network/network.pm:415
 #, c-format
 msgid "Proxy should be http://..."
 msgstr "代理服务器应该是 http://..."
 
-#: network/network.pm:410
+#: network/network.pm:416
 #, c-format
 msgid "URL should begin with 'ftp:' or 'http:'"
 msgstr "URL 应该是以“ftp:”或“http:”开头"
 
-#: network/shorewall.pm:50
+#: network/shorewall.pm:55
 #, c-format
 msgid ""
 "Please enter the name of the interface connected to the internet.\n"
@@ -11191,12 +11192,12 @@ msgstr ""
 "\t\teth0 或 eth1 代表有线电视连接, \n"
 "\t\tippp+ 代表 ISDN 连接。\n"
 
-#: network/thirdparty.pm:218
+#: network/thirdparty.pm:231
 #, c-format
 msgid "Copy the Alcatel microcode as mgmt.o in /usr/share/speedtouch/"
 msgstr "将阿尔卡特微码复制到 /usr/share/speedtouch 并保存为 mgmt.o"
 
-#: network/thirdparty.pm:227
+#: network/thirdparty.pm:240
 #, c-format
 msgid ""
 "The ECI Hi-Focus modem cannot be supported due to binary driver distribution "
@@ -11208,24 +11209,24 @@ msgstr ""
 "\n"
 "您可以在此网站: http://eciadsl.flashtux.org/ 找到驱动程序。"
 
-#: network/thirdparty.pm:306
+#: network/thirdparty.pm:319
 #, c-format
 msgid "Could not install the packages (%s)!"
 msgstr "无法安装软件包(%s)!"
 
-#: network/thirdparty.pm:314
+#: network/thirdparty.pm:327
 #, c-format
 msgid "Some packages (%s) are required but aren't available."
 msgstr "需要某些软件包(%s)，这些软件包不可用。"
 
-#: network/thirdparty.pm:315
+#: network/thirdparty.pm:328
 #, c-format
 msgid ""
 "These packages can be found in Mandriva Club or in Mandriva commercial "
 "releases."
 msgstr "这些软件包可以在 Mandriva Club 或 Mandriva Linux 零售产品中找到。"
 
-#: network/thirdparty.pm:317
+#: network/thirdparty.pm:330
 #, c-format
 msgid ""
 "The required files can also be installed from this URL:\n"
@@ -11234,22 +11235,22 @@ msgstr ""
 "所需的文件也可从以下 URL 安装:\n"
 "%s"
 
-#: network/thirdparty.pm:357
+#: network/thirdparty.pm:370
 #, c-format
 msgid "Unable to find \"%s\" on your Windows system!"
 msgstr "在 Windows 系统中找不到“%s”!"
 
-#: network/thirdparty.pm:359
+#: network/thirdparty.pm:372
 #, c-format
 msgid "No Windows system has been detected!"
 msgstr "未检测到 Windows 系统!"
 
-#: network/thirdparty.pm:369
+#: network/thirdparty.pm:382
 #, c-format
 msgid "Insert floppy"
 msgstr "插入软盘"
 
-#: network/thirdparty.pm:370
+#: network/thirdparty.pm:383
 #, c-format
 msgid ""
 "Insert a FAT formatted floppy in drive %s with %s in root directory and "
@@ -11258,12 +11259,12 @@ msgstr ""
 "请在驱动器 %s 中插入一张 FAT 格式的软盘, 该软盘要求在根目录有 %s。然后, 请按 "
 "%s"
 
-#: network/thirdparty.pm:380
+#: network/thirdparty.pm:393
 #, c-format
 msgid "Floppy access error, unable to mount device %s"
 msgstr "软驱访问错误, 无法挂载 %s"
 
-#: network/thirdparty.pm:390
+#: network/thirdparty.pm:403
 #, c-format
 msgid ""
 "You need the Alcatel microcode.\n"
@@ -11274,38 +11275,38 @@ msgstr ""
 "您可以通过软盘或您的 Windows 分区提供该微代码,\n"
 "或者现在跳过稍后再做。"
 
-#: network/thirdparty.pm:394 network/thirdparty.pm:396
+#: network/thirdparty.pm:407 network/thirdparty.pm:409
 #, c-format
 msgid "Use a floppy"
 msgstr "使用软盘"
 
-#: network/thirdparty.pm:394
+#: network/thirdparty.pm:407
 #, c-format
 msgid "Use my Windows partition"
 msgstr "使用我的 Windows 分区"
 
-#: network/thirdparty.pm:404
+#: network/thirdparty.pm:417
 #, c-format
 msgid "Firmware copy failed, file %s not found"
 msgstr "固件复制失败, 文件 %s 未找到"
 
-#: network/thirdparty.pm:409 standalone/drakautoinst:250
+#: network/thirdparty.pm:422 standalone/drakautoinst:250
 #: standalone/drakvpn:888 standalone/scannerdrake:405
 #, c-format
 msgid "Congratulations!"
 msgstr "恭喜！"
 
-#: network/thirdparty.pm:409
+#: network/thirdparty.pm:422
 #, c-format
 msgid "Firmware copy succeeded"
 msgstr "固件复制成功"
 
-#: network/thirdparty.pm:477
+#: network/thirdparty.pm:490
 #, c-format
 msgid "Looking for required software and drivers..."
 msgstr "正在查找所需的软件或驱动程序..."
 
-#: network/thirdparty.pm:482
+#: network/thirdparty.pm:495
 #, c-format
 msgid "Please wait, running device configuration commands..."
 msgstr "请稍候, 正在运行设备配置命令..."
@@ -12953,7 +12954,7 @@ msgstr "没有找到远程打印机！"
 #: standalone/drakbackup:605 standalone/drakbackup:640
 #: standalone/drakbackup:741 standalone/draknfs:203
 #: standalone/draksambashare:623 standalone/draksambashare:790
-#: standalone/harddrake2:259
+#: standalone/harddrake2:256
 #, c-format
 msgid "Information"
 msgstr "信息"
@@ -15972,6 +15973,11 @@ msgstr "如何加入 Mandriva Linux 社区？"
 msgid "How to maintain your system up-to-date?"
 msgstr "如何维护您的系统？"
 
+#: share/advertising/skype.pl:3
+#, c-format
+msgid "Skype lets you make calls through the Internet for free."
+msgstr ""
+
 #: share/compssUsers.pl:26
 #, c-format
 msgid "Office Workstation"
@@ -19719,7 +19725,7 @@ msgstr ""
 "请从 Mandriva Linux 控制中心运行“%s”助手"
 
 #. -PO: here "Add Connection" should be translated the same was as in control-center
-#: standalone/drakconnect:976 standalone/drakroam:30 standalone/net_applet:52
+#: standalone/drakconnect:976 standalone/drakroam:34 standalone/net_applet:52
 #, c-format
 msgid "Set up a new network interface (LAN, ISDN, ADSL, ...)"
 msgstr "设置新的网络连接(局域网、ISDN、ADSL……)"
@@ -20522,12 +20528,12 @@ msgstr "日志"
 msgid "Clear logs"
 msgstr "清除日志"
 
-#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:439
+#: standalone/drakids:62 standalone/drakids:67 standalone/net_applet:464
 #, c-format
 msgid "Blacklist"
 msgstr "黑名单"
 
-#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:444
+#: standalone/drakids:63 standalone/drakids:80 standalone/net_applet:469
 #, c-format
 msgid "Whitelist"
 msgstr "白名单"
@@ -20549,7 +20555,7 @@ msgstr "从白名单中移除"
 
 #: standalone/drakids:136 standalone/drakids:145 standalone/drakids:170
 #: standalone/drakids:179 standalone/drakids:189 standalone/drakids:265
-#: standalone/drakroam:140 standalone/net_applet:180 standalone/net_applet:354
+#: standalone/drakroam:182 standalone/net_applet:201 standalone/net_applet:379
 #, c-format
 msgid "Unable to contact daemon"
 msgstr "无法连接守护程序"
@@ -20574,7 +20580,7 @@ msgstr "攻击类型"
 msgid "Service"
 msgstr "服务"
 
-#: standalone/drakids:206
+#: standalone/drakids:206 standalone/net_applet:72
 #, c-format
 msgid "Network interface"
 msgstr "网卡"
@@ -21140,7 +21146,7 @@ msgstr "用户: %s"
 msgid "Group: %s"
 msgstr "组: %s"
 
-#: standalone/drakroam:29
+#: standalone/drakroam:33
 #, c-format
 msgid ""
 "You do not have any wireless interface.\n"
@@ -21149,38 +21155,38 @@ msgstr ""
 "您没有任何无线网卡。\n"
 "请从 Mandriva Linux 控制中心运行“%s”助手"
 
-#: standalone/drakroam:44
+#: standalone/drakroam:48
 #, c-format
 msgid "SSID"
 msgstr "SSID"
 
-#: standalone/drakroam:46
-#, c-format
-msgid "Encryption"
-msgstr "加密"
-
-#: standalone/drakroam:47
+#: standalone/drakroam:49
 #, c-format
 msgid "Signal strength"
 msgstr "信号强度"
 
-#: standalone/drakroam:104
+#: standalone/drakroam:51
+#, c-format
+msgid "Encryption"
+msgstr "加密"
+
+#: standalone/drakroam:112
 #, c-format
 msgid "Please enter settings for wireless network \"%s\""
 msgstr "请输入无线网络“%s”的设置"
 
-#: standalone/drakroam:115
+#: standalone/drakroam:123
 #, c-format
 msgid "DNS server"
 msgstr "DNS 服务器"
 
-#: standalone/drakroam:166
+#: standalone/drakroam:228
 #, c-format
 msgid "Connect"
 msgstr "连接"
 
 #. -PO: "Refresh" is a button text and the translation has to be AS SHORT AS POSSIBLE
-#: standalone/drakroam:167 standalone/printerdrake:251
+#: standalone/drakroam:229 standalone/printerdrake:251
 #, c-format
 msgid "Refresh"
 msgstr "刷新"
@@ -21585,7 +21591,7 @@ msgstr "用户信息"
 msgid "User name:"
 msgstr "用户名:"
 
-#: standalone/draksambashare:929 standalone/harddrake2:551
+#: standalone/draksambashare:929 standalone/harddrake2:563
 #, c-format
 msgid "Password:"
 msgstr "密码："
@@ -21680,7 +21686,7 @@ msgstr "所有"
 msgid "LOCAL"
 msgstr "本地"
 
-#: standalone/draksec:53 standalone/net_applet:449
+#: standalone/draksec:53 standalone/net_applet:474
 #, c-format
 msgid "Ignore"
 msgstr "忽略"
@@ -22077,7 +22083,7 @@ msgstr ""
 msgid "Autodetection"
 msgstr "自动检测"
 
-#: standalone/drakups:101 standalone/harddrake2:246
+#: standalone/drakups:101 standalone/harddrake2:356
 #, c-format
 msgid "Detection in progress"
 msgstr "检测进行中"
@@ -24227,7 +24233,7 @@ msgstr "图形桌面使用鼠标的协议"
 
 #: standalone/harddrake2:128 standalone/harddrake2:137
 #: standalone/harddrake2:144 standalone/harddrake2:152
-#: standalone/harddrake2:319
+#: standalone/harddrake2:322
 #, c-format
 msgid "Identification"
 msgstr "标识"
@@ -24365,69 +24371,69 @@ msgstr ""
 msgid "Harddrake2"
 msgstr "Drak 硬件配置"
 
-#: standalone/harddrake2:256
+#: standalone/harddrake2:253
 #, c-format
 msgid "Detected hardware"
 msgstr "检测到的硬件"
 
-#: standalone/harddrake2:261
+#: standalone/harddrake2:258
 #, c-format
 msgid "Configure module"
 msgstr "配置模块"
 
-#: standalone/harddrake2:268
+#: standalone/harddrake2:265
 #, c-format
 msgid "Run config tool"
 msgstr "运行配置工具"
 
-#: standalone/harddrake2:307 standalone/printerdrake:306
+#: standalone/harddrake2:289
+#, c-format
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr "单击左侧树中的设备, 就可在此显示其信息。"
+
+#: standalone/harddrake2:310 standalone/printerdrake:306
 #: standalone/printerdrake:320
 #, c-format
 msgid "Unknown"
 msgstr "未知"
 
-#: standalone/harddrake2:327
+#: standalone/harddrake2:330
 #, c-format
 msgid "Misc"
 msgstr "杂项"
 
-#: standalone/harddrake2:342
-#, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
-msgstr "单击左侧树中的设备, 就可在此显示其信息。"
-
-#: standalone/harddrake2:394
+#: standalone/harddrake2:406
 #, c-format
 msgid "secondary"
 msgstr "次要"
 
-#: standalone/harddrake2:394
+#: standalone/harddrake2:406
 #, c-format
 msgid "primary"
 msgstr "主"
 
-#: standalone/harddrake2:398
+#: standalone/harddrake2:410
 #, c-format
 msgid "burner"
 msgstr "刻录机"
 
-#: standalone/harddrake2:398
+#: standalone/harddrake2:410
 #, c-format
 msgid "DVD"
 msgstr "DVD"
 
-#: standalone/harddrake2:545 standalone/harddrake2:548
+#: standalone/harddrake2:557 standalone/harddrake2:560
 #, c-format
 msgid "Upload the hardware list"
 msgstr "上传硬件列表"
 
-#: standalone/harddrake2:550
+#: standalone/harddrake2:562
 #, c-format
 msgid "Account:"
 msgstr "账户："
 
-#: standalone/harddrake2:552
+#: standalone/harddrake2:564
 #, c-format
 msgid "Hostname:"
 msgstr "主机名："
@@ -24566,7 +24572,7 @@ msgstr "搜索"
 msgid "A tool to monitor your logs"
 msgstr "日志监视工具"
 
-#: standalone/logdrake:128 standalone/net_applet:316 standalone/net_monitor:93
+#: standalone/logdrake:128 standalone/net_applet:341 standalone/net_monitor:93
 #, c-format
 msgid "Settings"
 msgstr "设置"
@@ -24767,12 +24773,14 @@ msgstr "已通过网卡 %s 联网"
 msgid "Network is down on interface %s. Click on \"Configure Network\""
 msgstr "网卡 %s 的网络已断。请单击“配置网络”"
 
-#: standalone/net_applet:56 standalone/net_monitor:468
+#: standalone/net_applet:56 standalone/net_applet:76
+#: standalone/net_monitor:468
 #, c-format
 msgid "Connect %s"
 msgstr "连接 %s"
 
-#: standalone/net_applet:57 standalone/net_monitor:468
+#: standalone/net_applet:57 standalone/net_applet:76
+#: standalone/net_monitor:468
 #, c-format
 msgid "Disconnect %s"
 msgstr "断开 %s"
@@ -24797,92 +24805,92 @@ msgstr "配置网络"
 msgid "Watched interface"
 msgstr "监视的接口"
 
-#: standalone/net_applet:72
+#: standalone/net_applet:92
 #, c-format
 msgid "Profiles"
 msgstr "配置文件"
 
-#: standalone/net_applet:81
+#: standalone/net_applet:101
 #, c-format
 msgid "Get Online Help"
 msgstr "获得在线帮助"
 
-#: standalone/net_applet:305
+#: standalone/net_applet:329
 #, c-format
 msgid "Interactive Firewall automatic mode"
 msgstr "交互式防火墙自动模式"
 
-#: standalone/net_applet:310
+#: standalone/net_applet:334
 #, c-format
 msgid "Always launch on startup"
 msgstr "启动时自动调用"
 
-#: standalone/net_applet:314
+#: standalone/net_applet:338
 #, c-format
 msgid "Wireless networks"
 msgstr "无线网络"
 
-#: standalone/net_applet:398
+#: standalone/net_applet:423
 #, c-format
 msgid "Interactive Firewall: intrusion detected"
 msgstr "交互式防火墙: 检测到了入侵"
 
-#: standalone/net_applet:411
+#: standalone/net_applet:436
 #, c-format
 msgid "What do you want to do with this attacker?"
 msgstr "您想要对入侵者进行什么操作?"
 
-#: standalone/net_applet:414
+#: standalone/net_applet:439
 #, c-format
 msgid "Attack details"
 msgstr "攻击细节"
 
-#: standalone/net_applet:418
+#: standalone/net_applet:443
 #, c-format
 msgid "Attack time: %s"
 msgstr "攻击时间: %s"
 
-#: standalone/net_applet:419
+#: standalone/net_applet:444
 #, c-format
 msgid "Network interface: %s"
 msgstr "网卡: %s"
 
-#: standalone/net_applet:420
+#: standalone/net_applet:445
 #, c-format
 msgid "Attack type: %s"
 msgstr "攻击类型: %s"
 
-#: standalone/net_applet:421
+#: standalone/net_applet:446
 #, c-format
 msgid "Protocol: %s"
 msgstr "协议: %s"
 
-#: standalone/net_applet:422
+#: standalone/net_applet:447
 #, c-format
 msgid "Attacker IP address: %s"
 msgstr "攻击者 IP 地址: %s"
 
-#: standalone/net_applet:423
+#: standalone/net_applet:448
 #, c-format
 msgid "Attacker hostname: %s"
 msgstr "攻击者主机名: %s"
 
-#: standalone/net_applet:426
+#: standalone/net_applet:451
 #, c-format
 msgid "Service attacked: %s"
 msgstr "攻击的服务: %s"
 
-#: standalone/net_applet:427
+#: standalone/net_applet:452
 #, c-format
 msgid "Port attacked: %s"
 msgstr "攻击的端口: %s"
 
-#: standalone/net_applet:429
+#: standalone/net_applet:454
 #, c-format
 msgid "Type of ICMP attack: %s"
 msgstr "ICMP 攻击的类型: %s"
 
-#: standalone/net_applet:434
+#: standalone/net_applet:459
 #, c-format
 msgid "Always blacklist (do not ask again)"
 msgstr "总是黑名单(以后不再询问)"
@@ -25654,7 +25662,7 @@ msgstr "添加了一些设备: %s\n"
 msgid "- %s was added\n"
 msgstr "- %s 已添加\n"
 
-#: standalone/service_harddrake:207
+#: standalone/service_harddrake:206
 #, c-format
 msgid "Hardware probing in progress"
 msgstr "硬件检测进行中"