Update POT file

1 files changed, 344 insertions, 335 deletions

diff --git a/perl-install/share/po/zh_CN.po b/perl-install/share/po/zh_CN.po
index 210d419b2..37d59aaed 100644
--- a/perl-install/share/po/zh_CN.po
+++ b/perl-install/share/po/zh_CN.po
@@ -7,7 +7,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: zh_CN\n"
-"POT-Creation-Date: 2009-10-07 13:57+0200\n"
+"POT-Creation-Date: 2010-01-27 17:55+0100\n"
 "PO-Revision-Date: 2009-04-09 11:48+0800\n"
 "Last-Translator: Funda Wang <fundawang@linux.net.cn>\n"
 "Language-Team: Mandriva Linux i18n Team <cooker-i18n@mandrivalinux.org>\n"
@@ -15,10 +15,10 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 
-#: any.pm:252 any.pm:910 diskdrake/interactive.pm:594
-#: diskdrake/interactive.pm:794 diskdrake/interactive.pm:838
-#: diskdrake/interactive.pm:942 diskdrake/interactive.pm:1196
-#: diskdrake/interactive.pm:1248 do_pkgs.pm:241 do_pkgs.pm:287
+#: any.pm:252 any.pm:929 diskdrake/interactive.pm:597
+#: diskdrake/interactive.pm:802 diskdrake/interactive.pm:846
+#: diskdrake/interactive.pm:950 diskdrake/interactive.pm:1204
+#: diskdrake/interactive.pm:1256 do_pkgs.pm:241 do_pkgs.pm:287
 #: harddrake/sound.pm:303 interactive.pm:587 pkgs.pm:281
 #, c-format
 msgid "Please wait"
@@ -171,7 +171,7 @@ msgstr "启用 APIC"
 msgid "Enable Local APIC"
 msgstr "启用本地 APIC"
 
-#: any.pm:415 any.pm:855 any.pm:871 authentication.pm:250
+#: any.pm:415 any.pm:867 any.pm:883 authentication.pm:250
 #: diskdrake/smbnfs_gtk.pm:181
 #, c-format
 msgid "Password"
@@ -182,7 +182,7 @@ msgstr "密码"
 msgid "The passwords do not match"
 msgstr "两次密码不符"
 
-#: any.pm:417 authentication.pm:261 diskdrake/interactive.pm:1420
+#: any.pm:417 authentication.pm:261 diskdrake/interactive.pm:1428
 #, c-format
 msgid "Please try again"
 msgstr "请再试一次"
@@ -192,7 +192,7 @@ msgstr "请再试一次"
 msgid "You can not use a password with %s"
 msgstr "您在 %s 时不能使用密码"
 
-#: any.pm:421 any.pm:857 any.pm:873 authentication.pm:251
+#: any.pm:421 any.pm:869 any.pm:885 authentication.pm:251
 #, c-format
 msgid "Password (again)"
 msgstr "密码(请再输一次)"
@@ -283,7 +283,7 @@ msgstr "Initrd"
 msgid "Network profile"
 msgstr "网络配置文件"
 
-#: any.pm:532 any.pm:537 any.pm:539 diskdrake/interactive.pm:404
+#: any.pm:532 any.pm:537 any.pm:539 diskdrake/interactive.pm:407
 #, c-format
 msgid "Label"
 msgstr "标签"
@@ -357,189 +357,194 @@ msgstr ""
 "引导菜单中现有下列条目。\n"
 "您可以创建额外的条目或是更改已存在的条目。"
 
-#: any.pm:816
+#: any.pm:827
 #, c-format
 msgid "access to X programs"
 msgstr "允许使用 X 应用程序"
 
-#: any.pm:817
+#: any.pm:828
 #, c-format
 msgid "access to rpm tools"
 msgstr "允许使用 rpm 工具"
 
-#: any.pm:818
+#: any.pm:829
 #, c-format
 msgid "allow \"su\""
 msgstr "允许使用“su”指令"
 
-#: any.pm:819
+#: any.pm:830
 #, c-format
 msgid "access to administrative files"
 msgstr "允许访问系统设置文件"
 
-#: any.pm:820
+#: any.pm:831
 #, c-format
 msgid "access to network tools"
 msgstr "允许使用网络工具"
 
-#: any.pm:821
+#: any.pm:832
 #, c-format
 msgid "access to compilation tools"
 msgstr "允许使用编译工具"
 
-#: any.pm:827
+#: any.pm:838
 #, c-format
 msgid "(already added %s)"
 msgstr "(已经添加了 %s)"
 
-#: any.pm:833
+#: any.pm:844
 #, c-format
 msgid "Please give a user name"
 msgstr "请给出用户名"
 
-#: any.pm:834
+#: any.pm:845
 #, c-format
 msgid ""
 "The user name must start with a lower case letter followed by only lower "
 "cased letters, numbers, `-' and `_'"
 msgstr "用户名只能包含小写字母、数字、“-”和“_”"
 
-#: any.pm:835
+#: any.pm:846
 #, c-format
 msgid "The user name is too long"
 msgstr "该用户名太长"
 
-#: any.pm:836
+#: any.pm:847
 #, c-format
 msgid "This user name has already been added"
 msgstr "该用户名已经存在"
 
-#: any.pm:842 any.pm:875
+#: any.pm:853 any.pm:887
 #, c-format
 msgid "User ID"
 msgstr "用户 ID"
 
-#: any.pm:842 any.pm:876
+#: any.pm:853 any.pm:888
 #, c-format
 msgid "Group ID"
 msgstr "组 ID"
 
-#: any.pm:843
+#: any.pm:854
 #, c-format
 msgid "%s must be a number"
 msgstr "%s 必须是数字"
 
-#: any.pm:844
+#: any.pm:855
 #, c-format
 msgid "%s should be above 500. Accept anyway?"
 msgstr "%s 应该大于 500。仍然接受吗？"
 
-#: any.pm:848
+#: any.pm:859
 #, c-format
 msgid "User management"
 msgstr "用户管理"
 
-#: any.pm:854 authentication.pm:237
+#: any.pm:865
+#, c-format
+msgid "Enable guest account"
+msgstr ""
+
+#: any.pm:866 authentication.pm:237
 #, c-format
 msgid "Set administrator (root) password"
 msgstr "设定管理员(root)密码"
 
-#: any.pm:859
+#: any.pm:871
 #, c-format
 msgid "Enter a user"
 msgstr "输入一个用户"
 
-#: any.pm:861
+#: any.pm:873
 #, c-format
 msgid "Icon"
 msgstr "图标"
 
-#: any.pm:864
+#: any.pm:876
 #, c-format
 msgid "Real name"
 msgstr "真实姓名"
 
-#: any.pm:869
+#: any.pm:881
 #, c-format
 msgid "Login name"
 msgstr "登录名"
 
-#: any.pm:874
+#: any.pm:886
 #, c-format
 msgid "Shell"
 msgstr "Shell"
 
-#: any.pm:910
+#: any.pm:929
 #, c-format
 msgid "Please wait, adding media..."
 msgstr "正在添加介质，请稍候..."
 
-#: any.pm:940 security/l10n.pm:14
+#: any.pm:959 security/l10n.pm:14
 #, c-format
 msgid "Autologin"
 msgstr "自动登录"
 
-#: any.pm:941
+#: any.pm:960
 #, c-format
 msgid "I can set up your computer to automatically log on one user."
 msgstr "您可在此设定启动时自动以某用户的身份登入系统。"
 
-#: any.pm:942
+#: any.pm:961
 #, c-format
 msgid "Use this feature"
 msgstr "使用此特性"
 
-#: any.pm:943
+#: any.pm:962
 #, c-format
 msgid "Choose the default user:"
 msgstr "选择默认的用户:"
 
-#: any.pm:944
+#: any.pm:963
 #, c-format
 msgid "Choose the window manager to run:"
 msgstr "选择要运行的窗口管理程序:"
 
-#: any.pm:955 any.pm:975 any.pm:1048
+#: any.pm:974 any.pm:994 any.pm:1067
 #, c-format
 msgid "Release Notes"
 msgstr "版本通告"
 
-#: any.pm:982 any.pm:1340 interactive/gtk.pm:819
+#: any.pm:1001 any.pm:1355 interactive/gtk.pm:819
 #, c-format
 msgid "Close"
 msgstr "关闭"
 
-#: any.pm:1034
+#: any.pm:1053
 #, c-format
 msgid "License agreement"
 msgstr "许可协议"
 
-#: any.pm:1036 diskdrake/dav.pm:26
+#: any.pm:1055 diskdrake/dav.pm:26
 #, c-format
 msgid "Quit"
 msgstr "退出"
 
-#: any.pm:1043
+#: any.pm:1062
 #, c-format
 msgid "Do you accept this license ?"
 msgstr "您接受此许可协议吗?"
 
-#: any.pm:1044
+#: any.pm:1063
 #, c-format
 msgid "Accept"
 msgstr "接受"
 
-#: any.pm:1044
+#: any.pm:1063
 #, c-format
 msgid "Refuse"
 msgstr "拒绝"
 
-#: any.pm:1070 any.pm:1136
+#: any.pm:1089 any.pm:1151
 #, c-format
 msgid "Please choose a language to use"
 msgstr "请选择要使用的语言。"
 
-#: any.pm:1099
+#: any.pm:1117
 #, c-format
 msgid ""
 "Mandriva Linux can support multiple languages. Select\n"
@@ -549,77 +554,77 @@ msgstr ""
 "Mandriva Linux 可以支持多种语言。请选择您想要安装的语言。\n"
 "安装完成并重新启动系统后它们就可以使用。"
 
-#: any.pm:1102
+#: any.pm:1120
 #, c-format
 msgid "Multi languages"
 msgstr "多语言"
 
-#: any.pm:1113 any.pm:1145
+#: any.pm:1129 any.pm:1160
 #, c-format
 msgid "Old compatibility (non UTF-8) encoding"
 msgstr "使用旧的编码方式(非 UTF-8)"
 
-#: any.pm:1115
+#: any.pm:1130
 #, c-format
 msgid "All languages"
 msgstr "全部语言"
 
-#: any.pm:1137
+#: any.pm:1152
 #, c-format
 msgid "Language choice"
 msgstr "语言选择"
 
-#: any.pm:1191
+#: any.pm:1206
 #, c-format
 msgid "Country / Region"
 msgstr "国家/地区"
 
-#: any.pm:1192
+#: any.pm:1207
 #, c-format
 msgid "Please choose your country"
 msgstr "请选择您的国家/地区。"
 
-#: any.pm:1194
+#: any.pm:1209
 #, c-format
 msgid "Here is the full list of available countries"
 msgstr "在此列出了可用的全部国家/地区"
 
-#: any.pm:1195
+#: any.pm:1210
 #, c-format
 msgid "Other Countries"
 msgstr "其它国家"
 
-#: any.pm:1195 interactive.pm:488 interactive/gtk.pm:445
+#: any.pm:1210 interactive.pm:488 interactive/gtk.pm:445
 #, c-format
 msgid "Advanced"
 msgstr "高级"
 
-#: any.pm:1201
+#: any.pm:1216
 #, c-format
 msgid "Input method:"
 msgstr "输入法:"
 
-#: any.pm:1204
+#: any.pm:1219
 #, c-format
 msgid "None"
 msgstr "无"
 
-#: any.pm:1285
+#: any.pm:1300
 #, c-format
 msgid "No sharing"
 msgstr "禁止共享"
 
-#: any.pm:1285
+#: any.pm:1300
 #, c-format
 msgid "Allow all users"
 msgstr "允许所有用户使用"
 
-#: any.pm:1285
+#: any.pm:1300
 #, c-format
 msgid "Custom"
 msgstr "自定义"
 
-#: any.pm:1289
+#: any.pm:1304
 #, c-format
 msgid ""
 "Would you like to allow users to share some of their directories?\n"
@@ -632,32 +637,32 @@ msgstr ""
 "选择允许, 用户将只需在 Konqueror 和 Nautilus 中单击“共享”即可开放共享。\n"
 "“自定义”允许按照不同用户细分设置。\n"
 
-#: any.pm:1301
+#: any.pm:1316
 #, c-format
 msgid ""
 "NFS: the traditional Unix file sharing system, with less support on Mac and "
 "Windows."
 msgstr "NFS: 传统的 Unix 文件共享系统, Mac 和 Windows 上支持较少。"
 
-#: any.pm:1304
+#: any.pm:1319
 #, c-format
 msgid ""
 "SMB: a file sharing system used by Windows, Mac OS X and many modern Linux "
 "systems."
 msgstr "SMB: Windows、MacOS X 和其它现代 Linux 系统所用的文件共享系统。"
 
-#: any.pm:1312
+#: any.pm:1327
 #, c-format
 msgid ""
 "You can export using NFS or SMB. Please select which you would like to use."
 msgstr "您可以使用 NFS 或 Samba 导出。请选择您想要使用的协议。"
 
-#: any.pm:1340
+#: any.pm:1355
 #, c-format
 msgid "Launch userdrake"
 msgstr "运行“Drak 用户管理”"
 
-#: any.pm:1342
+#: any.pm:1357
 #, c-format
 msgid ""
 "The per-user sharing uses the group \"fileshare\". \n"
@@ -666,54 +671,54 @@ msgstr ""
 "按用户设置的共享, 使用组“fileshare”。\n"
 "您可以使用“Drak 用户管理”将用户添加到此组中。"
 
-#: any.pm:1448
+#: any.pm:1463
 #, c-format
 msgid ""
 "You need to logout and back in again for changes to take effect. Press OK to "
 "logout now."
 msgstr "您需要注销后重新登录才能让更改生效。单击确定立即注销。"
 
-#: any.pm:1452
+#: any.pm:1467
 #, c-format
 msgid "You need to log out and back in again for changes to take effect"
 msgstr "您需要注销后重新登录才能让更改生效"
 
-#: any.pm:1487
+#: any.pm:1502
 #, c-format
 msgid "Timezone"
 msgstr "时区"
 
-#: any.pm:1487
+#: any.pm:1502
 #, c-format
 msgid "Which is your timezone?"
 msgstr "您所在的时区?"
 
-#: any.pm:1510 any.pm:1512
+#: any.pm:1525 any.pm:1527
 #, c-format
 msgid "Date, Clock & Time Zone Settings"
 msgstr "日期、时钟和时区设置"
 
-#: any.pm:1513
+#: any.pm:1528
 #, c-format
 msgid "What is the best time?"
 msgstr "最适合的时间是几点?"
 
-#: any.pm:1517
+#: any.pm:1532
 #, c-format
 msgid "%s (hardware clock set to UTC)"
 msgstr "%s (硬件时钟设定为 GMT)"
 
-#: any.pm:1518
+#: any.pm:1533
 #, c-format
 msgid "%s (hardware clock set to local time)"
 msgstr "%s (硬件时钟设定为本地时间)"
 
-#: any.pm:1520
+#: any.pm:1535
 #, c-format
 msgid "NTP Server"
 msgstr "NTP 服务器"
 
-#: any.pm:1521
+#: any.pm:1536
 #, c-format
 msgid "Automatic time synchronization (using NTP)"
 msgstr "自动时间同步(使用 NTP)"
@@ -1039,7 +1044,7 @@ msgid "Domain Admin Password"
 msgstr "域管理员密码"
 
 #. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: bootloader.pm:960
+#: bootloader.pm:964
 #, c-format
 msgid ""
 "Welcome to the operating system chooser!\n"
@@ -1054,56 +1059,56 @@ msgstr ""
 "wait for default boot.\n"
 "\n"
 
-#: bootloader.pm:1132
+#: bootloader.pm:1141
 #, c-format
 msgid "LILO with text menu"
 msgstr "文本菜单 LILO"
 
-#: bootloader.pm:1133
+#: bootloader.pm:1142
 #, c-format
 msgid "GRUB with graphical menu"
 msgstr "图形菜单 GRUB"
 
-#: bootloader.pm:1134
+#: bootloader.pm:1143
 #, c-format
 msgid "GRUB with text menu"
 msgstr "文本菜单 GRUB"
 
-#: bootloader.pm:1135
+#: bootloader.pm:1144
 #, c-format
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: bootloader.pm:1136
+#: bootloader.pm:1145
 #, c-format
 msgid "SILO"
 msgstr "SILO"
 
-#: bootloader.pm:1218
+#: bootloader.pm:1227
 #, c-format
 msgid "not enough room in /boot"
 msgstr "/boot 中没有足够空间"
 
-#: bootloader.pm:1874
+#: bootloader.pm:1883
 #, c-format
 msgid "You can not install the bootloader on a %s partition\n"
 msgstr "%s 分区不能安装启动引导程序\n"
 
-#: bootloader.pm:1995
+#: bootloader.pm:2004
 #, c-format
 msgid ""
 "Your bootloader configuration must be updated because partition has been "
 "renumbered"
 msgstr "必须更新您的启动引导程序配置, 因为分区已经重新编号"
 
-#: bootloader.pm:2008
+#: bootloader.pm:2017
 #, c-format
 msgid ""
 "The bootloader can not be installed correctly. You have to boot rescue and "
 "choose \"%s\""
 msgstr "无法正确安装启动引导程序。您需要以抢救方式启动并选择“%s”"
 
-#: bootloader.pm:2009
+#: bootloader.pm:2018
 #, c-format
 msgid "Re-install Boot Loader"
 msgstr "重新安装启动引导程序"
@@ -1170,12 +1175,12 @@ msgstr ""
 msgid "New"
 msgstr "新建"
 
-#: diskdrake/dav.pm:63 diskdrake/interactive.pm:411 diskdrake/smbnfs_gtk.pm:75
+#: diskdrake/dav.pm:63 diskdrake/interactive.pm:414 diskdrake/smbnfs_gtk.pm:75
 #, c-format
 msgid "Unmount"
 msgstr "卸载"
 
-#: diskdrake/dav.pm:64 diskdrake/interactive.pm:407 diskdrake/smbnfs_gtk.pm:76
+#: diskdrake/dav.pm:64 diskdrake/interactive.pm:410 diskdrake/smbnfs_gtk.pm:76
 #, c-format
 msgid "Mount"
 msgstr "挂载"
@@ -1185,16 +1190,16 @@ msgstr "挂载"
 msgid "Server"
 msgstr "服务器"
 
-#: diskdrake/dav.pm:66 diskdrake/interactive.pm:401
-#: diskdrake/interactive.pm:666 diskdrake/interactive.pm:684
-#: diskdrake/interactive.pm:688 diskdrake/removable.pm:23
+#: diskdrake/dav.pm:66 diskdrake/interactive.pm:404
+#: diskdrake/interactive.pm:674 diskdrake/interactive.pm:692
+#: diskdrake/interactive.pm:696 diskdrake/removable.pm:23
 #: diskdrake/smbnfs_gtk.pm:79
 #, c-format
 msgid "Mount point"
 msgstr "挂载点"
 
-#: diskdrake/dav.pm:67 diskdrake/interactive.pm:403
-#: diskdrake/interactive.pm:1090 diskdrake/removable.pm:24
+#: diskdrake/dav.pm:67 diskdrake/interactive.pm:406
+#: diskdrake/interactive.pm:1098 diskdrake/removable.pm:24
 #: diskdrake/smbnfs_gtk.pm:80
 #, c-format
 msgid "Options"
@@ -1213,11 +1218,11 @@ msgstr "完成"
 
 #: diskdrake/dav.pm:78 diskdrake/hd_gtk.pm:128 diskdrake/hd_gtk.pm:294
 #: diskdrake/interactive.pm:247 diskdrake/interactive.pm:260
-#: diskdrake/interactive.pm:450 diskdrake/interactive.pm:520
-#: diskdrake/interactive.pm:525 diskdrake/interactive.pm:656
-#: diskdrake/interactive.pm:909 diskdrake/interactive.pm:960
-#: diskdrake/interactive.pm:1136 diskdrake/interactive.pm:1149
-#: diskdrake/interactive.pm:1152 diskdrake/interactive.pm:1420
+#: diskdrake/interactive.pm:453 diskdrake/interactive.pm:523
+#: diskdrake/interactive.pm:528 diskdrake/interactive.pm:664
+#: diskdrake/interactive.pm:917 diskdrake/interactive.pm:968
+#: diskdrake/interactive.pm:1144 diskdrake/interactive.pm:1157
+#: diskdrake/interactive.pm:1160 diskdrake/interactive.pm:1428
 #: diskdrake/smbnfs_gtk.pm:42 do_pkgs.pm:23 do_pkgs.pm:28 do_pkgs.pm:44
 #: do_pkgs.pm:60 do_pkgs.pm:65 do_pkgs.pm:82 fsedit.pm:246
 #: interactive/http.pm:117 interactive/http.pm:118 modules/interactive.pm:19
@@ -1237,12 +1242,12 @@ msgstr "请输入 WebDAV 服务器的 URL"
 msgid "The URL must begin with http:// or https://"
 msgstr "URL 应该是以 http:// 或 https:// 开头"
 
-#: diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:412 diskdrake/interactive.pm:303
-#: diskdrake/interactive.pm:388 diskdrake/interactive.pm:550
-#: diskdrake/interactive.pm:747 diskdrake/interactive.pm:805
-#: diskdrake/interactive.pm:940 diskdrake/interactive.pm:982
-#: diskdrake/interactive.pm:983 diskdrake/interactive.pm:1233
-#: diskdrake/interactive.pm:1271 diskdrake/interactive.pm:1419 do_pkgs.pm:19
+#: diskdrake/dav.pm:106 diskdrake/hd_gtk.pm:412 diskdrake/interactive.pm:306
+#: diskdrake/interactive.pm:391 diskdrake/interactive.pm:553
+#: diskdrake/interactive.pm:755 diskdrake/interactive.pm:813
+#: diskdrake/interactive.pm:948 diskdrake/interactive.pm:990
+#: diskdrake/interactive.pm:991 diskdrake/interactive.pm:1241
+#: diskdrake/interactive.pm:1279 diskdrake/interactive.pm:1427 do_pkgs.pm:19
 #: do_pkgs.pm:39 do_pkgs.pm:57 do_pkgs.pm:77 harddrake/sound.pm:442
 #, c-format
 msgid "Warning"
@@ -1258,23 +1263,23 @@ msgstr "您确定想要删除此挂载点吗?"
 msgid "Server: "
 msgstr "服务器: "
 
-#: diskdrake/dav.pm:125 diskdrake/interactive.pm:493
-#: diskdrake/interactive.pm:1295 diskdrake/interactive.pm:1380
+#: diskdrake/dav.pm:125 diskdrake/interactive.pm:496
+#: diskdrake/interactive.pm:1303 diskdrake/interactive.pm:1388
 #, c-format
 msgid "Mount point: "
 msgstr "挂载点: "
 
-#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1387
+#: diskdrake/dav.pm:126 diskdrake/interactive.pm:1395
 #, c-format
 msgid "Options: %s"
 msgstr "选项: %s"
 
-#: diskdrake/hd_gtk.pm:61 diskdrake/interactive.pm:298
+#: diskdrake/hd_gtk.pm:61 diskdrake/interactive.pm:301
 #: diskdrake/smbnfs_gtk.pm:22 fs/mount_point.pm:106
-#: fs/partitioning_wizard.pm:52 fs/partitioning_wizard.pm:222
-#: fs/partitioning_wizard.pm:230 fs/partitioning_wizard.pm:269
-#: fs/partitioning_wizard.pm:388 fs/partitioning_wizard.pm:445
-#: fs/partitioning_wizard.pm:518 fs/partitioning_wizard.pm:521
+#: fs/partitioning_wizard.pm:53 fs/partitioning_wizard.pm:235
+#: fs/partitioning_wizard.pm:243 fs/partitioning_wizard.pm:282
+#: fs/partitioning_wizard.pm:431 fs/partitioning_wizard.pm:495
+#: fs/partitioning_wizard.pm:568 fs/partitioning_wizard.pm:571
 #, c-format
 msgid "Partitioning"
 msgstr "分区"
@@ -1284,8 +1289,8 @@ msgstr "分区"
 msgid "Click on a partition, choose a filesystem type then choose an action"
 msgstr "点击分区，选择文件系统类型，然后选择操作"
 
-#: diskdrake/hd_gtk.pm:110 diskdrake/interactive.pm:1111
-#: diskdrake/interactive.pm:1121 diskdrake/interactive.pm:1174
+#: diskdrake/hd_gtk.pm:110 diskdrake/interactive.pm:1119
+#: diskdrake/interactive.pm:1129 diskdrake/interactive.pm:1182
 #, c-format
 msgid "Read carefully"
 msgstr "请仔细阅读！"
@@ -1305,7 +1310,7 @@ msgstr "退出"
 msgid "Continue"
 msgstr "继续"
 
-#: diskdrake/hd_gtk.pm:182 fs/partitioning_wizard.pm:493 interactive.pm:653
+#: diskdrake/hd_gtk.pm:182 fs/partitioning_wizard.pm:544 interactive.pm:653
 #: interactive/gtk.pm:811 interactive/gtk.pm:829 interactive/gtk.pm:850
 #: ugtk2.pm:936
 #, c-format
@@ -1344,41 +1349,42 @@ msgid "Unknown"
 msgstr "未知"
 
 #: diskdrake/hd_gtk.pm:383
-#, c-format
-msgid "Ext3"
-msgstr "Ext3"
+#, fuzzy, c-format
+msgid "Ext4"
+msgstr "退出"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "XFS"
 msgstr "XFS"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "Swap"
 msgstr "交换"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "SunOS"
 msgstr "SunOS"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "HFS"
 msgstr "HFS"
 
-#: diskdrake/hd_gtk.pm:383
+#: diskdrake/hd_gtk.pm:383 fs/partitioning_wizard.pm:401
 #, c-format
 msgid "Windows"
 msgstr "Windows"
 
-#: diskdrake/hd_gtk.pm:384 services.pm:158
+#: diskdrake/hd_gtk.pm:384 fs/partitioning_wizard.pm:402 services.pm:158
 #, c-format
 msgid "Other"
 msgstr "其它"
 
-#: diskdrake/hd_gtk.pm:384 diskdrake/interactive.pm:1310
+#: diskdrake/hd_gtk.pm:384 diskdrake/interactive.pm:1318
+#: fs/partitioning_wizard.pm:402
 #, c-format
 msgid "Empty"
 msgstr "空"
@@ -1403,8 +1409,8 @@ msgstr "请先“Unmount”"
 msgid "Use ``%s'' instead (in expert mode)"
 msgstr "用“%s”代替(在专家模式中)"
 
-#: diskdrake/hd_gtk.pm:421 diskdrake/interactive.pm:402
-#: diskdrake/interactive.pm:588 diskdrake/removable.pm:25
+#: diskdrake/hd_gtk.pm:421 diskdrake/interactive.pm:405
+#: diskdrake/interactive.pm:591 diskdrake/removable.pm:25
 #: diskdrake/removable.pm:48
 #, c-format
 msgid "Type"
@@ -1420,14 +1426,14 @@ msgstr "选择其它分区"
 msgid "Choose a partition"
 msgstr "选择分区"
 
-#: diskdrake/interactive.pm:273 diskdrake/interactive.pm:379
+#: diskdrake/interactive.pm:273 diskdrake/interactive.pm:382
 #: interactive/curses.pm:512
 #, c-format
 msgid "More"
 msgstr "更多"
 
-#: diskdrake/interactive.pm:281 diskdrake/interactive.pm:291
-#: diskdrake/interactive.pm:1218
+#: diskdrake/interactive.pm:281 diskdrake/interactive.pm:294
+#: diskdrake/interactive.pm:1226
 #, c-format
 msgid "Confirmation"
 msgstr "确认"
@@ -1447,17 +1453,17 @@ msgstr "退出而不保存更改"
 msgid "Quit without writing the partition table?"
 msgstr "退出而不保存分区表吗?"
 
-#: diskdrake/interactive.pm:291
+#: diskdrake/interactive.pm:294
 #, c-format
 msgid "Do you want to save /etc/fstab modifications"
 msgstr "您想要保存 /etc/fstab 修改吗?"
 
-#: diskdrake/interactive.pm:298 fs/partitioning_wizard.pm:269
+#: diskdrake/interactive.pm:301 fs/partitioning_wizard.pm:282
 #, c-format
 msgid "You need to reboot for the partition table modifications to take place"
 msgstr "对分区表的更改要等到重新启动后才能生效"
 
-#: diskdrake/interactive.pm:303
+#: diskdrake/interactive.pm:306
 #, c-format
 msgid ""
 "You should format partition %s.\n"
@@ -1468,159 +1474,159 @@ msgstr ""
 "否则, 将无法在 fstab 中写入挂载点 %s 的任何信息。\n"
 "仍然退出吗?"
 
-#: diskdrake/interactive.pm:316
+#: diskdrake/interactive.pm:319
 #, c-format
 msgid "Clear all"
 msgstr "全部清除"
 
-#: diskdrake/interactive.pm:317
+#: diskdrake/interactive.pm:320
 #, c-format
 msgid "Auto allocate"
 msgstr "自动分配"
 
-#: diskdrake/interactive.pm:323
+#: diskdrake/interactive.pm:326
 #, c-format
 msgid "Toggle to normal mode"
 msgstr "切换到正常模式"
 
-#: diskdrake/interactive.pm:323
+#: diskdrake/interactive.pm:326
 #, c-format
 msgid "Toggle to expert mode"
 msgstr "切换到专家模式"
 
-#: diskdrake/interactive.pm:335
+#: diskdrake/interactive.pm:338
 #, c-format
 msgid "Hard drive information"
 msgstr "硬盘信息"
 
-#: diskdrake/interactive.pm:368
+#: diskdrake/interactive.pm:371
 #, c-format
 msgid "All primary partitions are used"
 msgstr "主分区数目已经满了"
 
-#: diskdrake/interactive.pm:369
+#: diskdrake/interactive.pm:372
 #, c-format
 msgid "I can not add any more partitions"
 msgstr "我无法再添加任何分区了"
 
-#: diskdrake/interactive.pm:370
+#: diskdrake/interactive.pm:373
 #, c-format
 msgid ""
 "To have more partitions, please delete one to be able to create an extended "
 "partition"
 msgstr "如果需要更多的分区, 请删除一个主分区以创建扩展分区"
 
-#: diskdrake/interactive.pm:381
+#: diskdrake/interactive.pm:384
 #, c-format
 msgid "Reload partition table"
 msgstr "重新读取分区表"
 
-#: diskdrake/interactive.pm:388
+#: diskdrake/interactive.pm:391
 #, c-format
 msgid "Detailed information"
 msgstr "详细信息"
 
-#: diskdrake/interactive.pm:400
+#: diskdrake/interactive.pm:403
 #, c-format
 msgid "View"
 msgstr "查看"
 
-#: diskdrake/interactive.pm:405 diskdrake/interactive.pm:760
+#: diskdrake/interactive.pm:408 diskdrake/interactive.pm:768
 #, c-format
 msgid "Resize"
 msgstr "改变大小"
 
-#: diskdrake/interactive.pm:406
+#: diskdrake/interactive.pm:409
 #, c-format
 msgid "Format"
 msgstr "格式化"
 
-#: diskdrake/interactive.pm:408 diskdrake/interactive.pm:870
+#: diskdrake/interactive.pm:411 diskdrake/interactive.pm:878
 #, c-format
 msgid "Add to RAID"
 msgstr "加入 RAID"
 
-#: diskdrake/interactive.pm:409 diskdrake/interactive.pm:891
+#: diskdrake/interactive.pm:412 diskdrake/interactive.pm:899
 #, c-format
 msgid "Add to LVM"
 msgstr "加入 LVM"
 
-#: diskdrake/interactive.pm:410
+#: diskdrake/interactive.pm:413
 #, c-format
 msgid "Use"
 msgstr "使用"
 
-#: diskdrake/interactive.pm:412
+#: diskdrake/interactive.pm:415
 #, c-format
 msgid "Delete"
 msgstr "删除"
 
-#: diskdrake/interactive.pm:413
+#: diskdrake/interactive.pm:416
 #, c-format
 msgid "Remove from RAID"
 msgstr "从 RAID 中移除"
 
-#: diskdrake/interactive.pm:414
+#: diskdrake/interactive.pm:417
 #, c-format
 msgid "Remove from LVM"
 msgstr "从 LVM 中移除"
 
-#: diskdrake/interactive.pm:415
+#: diskdrake/interactive.pm:418
 #, c-format
 msgid "Remove from dm"
 msgstr "从 dm 中移除"
 
-#: diskdrake/interactive.pm:416
+#: diskdrake/interactive.pm:419
 #, c-format
 msgid "Modify RAID"
 msgstr "修改 RAID"
 
-#: diskdrake/interactive.pm:417
+#: diskdrake/interactive.pm:420
 #, c-format
 msgid "Use for loopback"
 msgstr "用于回环"
 
-#: diskdrake/interactive.pm:428
+#: diskdrake/interactive.pm:431
 #, c-format
 msgid "Create"
 msgstr "新建"
 
-#: diskdrake/interactive.pm:450
+#: diskdrake/interactive.pm:453
 #, c-format
 msgid "Failed to mount partition"
 msgstr "挂载分区失败"
 
-#: diskdrake/interactive.pm:482 diskdrake/interactive.pm:484
+#: diskdrake/interactive.pm:485 diskdrake/interactive.pm:487
 #, c-format
 msgid "Create a new partition"
 msgstr "创建一个新分区"
 
-#: diskdrake/interactive.pm:486
+#: diskdrake/interactive.pm:489
 #, c-format
 msgid "Start sector: "
 msgstr "开始扇区: "
 
-#: diskdrake/interactive.pm:489 diskdrake/interactive.pm:975
+#: diskdrake/interactive.pm:492 diskdrake/interactive.pm:983
 #, c-format
 msgid "Size in MB: "
 msgstr "大小(MB): "
 
-#: diskdrake/interactive.pm:491 diskdrake/interactive.pm:976
+#: diskdrake/interactive.pm:494 diskdrake/interactive.pm:984
 #, c-format
 msgid "Filesystem type: "
 msgstr "文件系统类型: "
 
-#: diskdrake/interactive.pm:497
+#: diskdrake/interactive.pm:500
 #, c-format
 msgid "Preference: "
 msgstr "首选项: "
 
-#: diskdrake/interactive.pm:500
+#: diskdrake/interactive.pm:503
 #, c-format
 msgid "Logical volume name "
 msgstr "逻辑卷标"
 
-#: diskdrake/interactive.pm:520
+#: diskdrake/interactive.pm:523
 #, c-format
 msgid ""
 "You can not create a new partition\n"
@@ -1631,68 +1637,68 @@ msgstr ""
 "(您超过了允许的主分区数量)。\n"
 "请先删除一个主分区, 然后创建一个扩展分区。"
 
-#: diskdrake/interactive.pm:550
+#: diskdrake/interactive.pm:553
 #, c-format
 msgid "Remove the loopback file?"
 msgstr "删除回环(loopback)文件?"
 
-#: diskdrake/interactive.pm:572
+#: diskdrake/interactive.pm:575
 #, c-format
 msgid ""
 "After changing type of partition %s, all data on this partition will be lost"
 msgstr "在改变分区表 %s 的类型之后, 在这个分区上的所有资料将要被清除"
 
-#: diskdrake/interactive.pm:585
+#: diskdrake/interactive.pm:588
 #, c-format
 msgid "Change partition type"
 msgstr "更改分区类型"
 
-#: diskdrake/interactive.pm:587 diskdrake/removable.pm:47
+#: diskdrake/interactive.pm:590 diskdrake/removable.pm:47
 #, c-format
 msgid "Which filesystem do you want?"
 msgstr "您希望使用哪种文件系统?"
 
-#: diskdrake/interactive.pm:594
+#: diskdrake/interactive.pm:597
 #, c-format
 msgid "Switching from %s to %s"
 msgstr "从 %s 切换到 %s"
 
-#: diskdrake/interactive.pm:624
+#: diskdrake/interactive.pm:632
 #, c-format
 msgid "Set volume label"
 msgstr "设定卷标"
 
-#: diskdrake/interactive.pm:626
+#: diskdrake/interactive.pm:634
 #, c-format
 msgid "Beware, this will be written to disk as soon as you validate!"
 msgstr "小心，当您确定之后，这一内容将会立即写入磁盘！"
 
-#: diskdrake/interactive.pm:627
+#: diskdrake/interactive.pm:635
 #, c-format
 msgid "Beware, this will be written to disk only after formatting!"
 msgstr "小心，格式化之后这一内容将会立即写入磁盘！"
 
-#: diskdrake/interactive.pm:629
+#: diskdrake/interactive.pm:637
 #, c-format
 msgid "Which volume label?"
 msgstr "哪个卷标？"
 
-#: diskdrake/interactive.pm:630
+#: diskdrake/interactive.pm:638
 #, c-format
 msgid "Label:"
 msgstr "标签:"
 
-#: diskdrake/interactive.pm:651
+#: diskdrake/interactive.pm:659
 #, c-format
 msgid "Where do you want to mount the loopback file %s?"
 msgstr "您想把回环(loopback)文件 %s 挂载到哪里?"
 
-#: diskdrake/interactive.pm:652
+#: diskdrake/interactive.pm:660
 #, c-format
 msgid "Where do you want to mount device %s?"
 msgstr "您想把设备 %s 挂载到哪里?"
 
-#: diskdrake/interactive.pm:657
+#: diskdrake/interactive.pm:665
 #, c-format
 msgid ""
 "Can not unset mount point as this partition is used for loop back.\n"
@@ -1701,58 +1707,58 @@ msgstr ""
 "无法取消设定的挂载点, 因为该分区正用于回环。\n"
 "请先删除回环"
 
-#: diskdrake/interactive.pm:687
+#: diskdrake/interactive.pm:695
 #, c-format
 msgid "Where do you want to mount %s?"
 msgstr "您想把 %s 挂载到哪里?"
 
-#: diskdrake/interactive.pm:711 diskdrake/interactive.pm:794
-#: fs/partitioning_wizard.pm:129 fs/partitioning_wizard.pm:191
+#: diskdrake/interactive.pm:719 diskdrake/interactive.pm:802
+#: fs/partitioning_wizard.pm:128 fs/partitioning_wizard.pm:204
 #, c-format
 msgid "Resizing"
 msgstr "改变大小"
 
-#: diskdrake/interactive.pm:711
+#: diskdrake/interactive.pm:719
 #, c-format
 msgid "Computing FAT filesystem bounds"
 msgstr "计算 FAT 文件系统的边界"
 
-#: diskdrake/interactive.pm:747
+#: diskdrake/interactive.pm:755
 #, c-format
 msgid "This partition is not resizeable"
 msgstr "无法更改此分区的大小"
 
-#: diskdrake/interactive.pm:752
+#: diskdrake/interactive.pm:760
 #, c-format
 msgid "All data on this partition should be backed-up"
 msgstr "应该先备份在这个分区上的所有数据"
 
-#: diskdrake/interactive.pm:754
+#: diskdrake/interactive.pm:762
 #, c-format
 msgid "After resizing partition %s, all data on this partition will be lost"
 msgstr "改变分区 %s 的大小之后, 这个分区上现有的所有资料将被清除"
 
-#: diskdrake/interactive.pm:761
+#: diskdrake/interactive.pm:769
 #, c-format
 msgid "Choose the new size"
 msgstr "选择新的大小"
 
-#: diskdrake/interactive.pm:762
+#: diskdrake/interactive.pm:770
 #, c-format
 msgid "New size in MB: "
 msgstr "新大小(MB): "
 
-#: diskdrake/interactive.pm:763
+#: diskdrake/interactive.pm:771
 #, c-format
 msgid "Minimum size: %s MB"
 msgstr "最小大小：%s MB"
 
-#: diskdrake/interactive.pm:764
+#: diskdrake/interactive.pm:772
 #, c-format
 msgid "Maximum size: %s MB"
 msgstr "最大大小：%s MB"
 
-#: diskdrake/interactive.pm:805
+#: diskdrake/interactive.pm:813 fs/partitioning_wizard.pm:212
 #, c-format
 msgid ""
 "To ensure data integrity after resizing the partition(s),\n"
@@ -1761,57 +1767,57 @@ msgstr ""
 "为了保证更改分区大小之后的数据完整性, 在您下次启动进入 Microsoft Windows® 时"
 "可能会自动运行文件系统检查"
 
-#: diskdrake/interactive.pm:853 diskdrake/interactive.pm:1415
+#: diskdrake/interactive.pm:861 diskdrake/interactive.pm:1423
 #, c-format
 msgid "Filesystem encryption key"
 msgstr "文件系统加密密钥"
 
-#: diskdrake/interactive.pm:854
+#: diskdrake/interactive.pm:862
 #, c-format
 msgid "Enter your filesystem encryption key"
 msgstr "输入您的文件系统加密密钥"
 
-#: diskdrake/interactive.pm:855 diskdrake/interactive.pm:1423
+#: diskdrake/interactive.pm:863 diskdrake/interactive.pm:1431
 #, c-format
 msgid "Encryption key"
 msgstr "加密密钥"
 
-#: diskdrake/interactive.pm:862
+#: diskdrake/interactive.pm:870
 #, c-format
 msgid "Invalid key"
 msgstr "无效的密钥"
 
-#: diskdrake/interactive.pm:870
+#: diskdrake/interactive.pm:878
 #, c-format
 msgid "Choose an existing RAID to add to"
 msgstr "选择加入一个已存在的 RAID"
 
-#: diskdrake/interactive.pm:872 diskdrake/interactive.pm:893
+#: diskdrake/interactive.pm:880 diskdrake/interactive.pm:901
 #, c-format
 msgid "new"
 msgstr "新建"
 
-#: diskdrake/interactive.pm:891
+#: diskdrake/interactive.pm:899
 #, c-format
 msgid "Choose an existing LVM to add to"
 msgstr "选择加入一个已存在的 LVM"
 
-#: diskdrake/interactive.pm:903 diskdrake/interactive.pm:912
+#: diskdrake/interactive.pm:911 diskdrake/interactive.pm:920
 #, c-format
 msgid "LVM name"
 msgstr "LVM 名称"
 
-#: diskdrake/interactive.pm:904
+#: diskdrake/interactive.pm:912
 #, c-format
 msgid "Enter a name for the new LVM volume group"
 msgstr "输入新 LVM 卷组的名称"
 
-#: diskdrake/interactive.pm:909
+#: diskdrake/interactive.pm:917
 #, c-format
 msgid "\"%s\" already exists"
 msgstr "“%s”已经存在"
 
-#: diskdrake/interactive.pm:940
+#: diskdrake/interactive.pm:948
 #, c-format
 msgid ""
 "Physical volume %s is still in use.\n"
@@ -1820,117 +1826,117 @@ msgstr ""
 "物理卷 %s 仍在使用中。\n"
 "您是否想要将此卷上已用的物理扩展分区移动到其它卷上？"
 
-#: diskdrake/interactive.pm:942
+#: diskdrake/interactive.pm:950
 #, c-format
 msgid "Moving physical extents"
 msgstr "移动物理扩展分区"
 
-#: diskdrake/interactive.pm:960
+#: diskdrake/interactive.pm:968
 #, c-format
 msgid "This partition can not be used for loopback"
 msgstr "这个分区不能被用于回环"
 
-#: diskdrake/interactive.pm:973
+#: diskdrake/interactive.pm:981
 #, c-format
 msgid "Loopback"
 msgstr "回环"
 
-#: diskdrake/interactive.pm:974
+#: diskdrake/interactive.pm:982
 #, c-format
 msgid "Loopback file name: "
 msgstr "回环文件名: "
 
-#: diskdrake/interactive.pm:979
+#: diskdrake/interactive.pm:987
 #, c-format
 msgid "Give a file name"
 msgstr "给一个文件名"
 
-#: diskdrake/interactive.pm:982
+#: diskdrake/interactive.pm:990
 #, c-format
 msgid "File is already used by another loopback, choose another one"
 msgstr "文件已经被另一个回环使用, 请另外选择一个"
 
-#: diskdrake/interactive.pm:983
+#: diskdrake/interactive.pm:991
 #, c-format
 msgid "File already exists. Use it?"
 msgstr "文件已经存在。使用现有的文件吗?"
 
-#: diskdrake/interactive.pm:1015 diskdrake/interactive.pm:1018
+#: diskdrake/interactive.pm:1023 diskdrake/interactive.pm:1026
 #, c-format
 msgid "Mount options"
 msgstr "挂载选项"
 
-#: diskdrake/interactive.pm:1025
+#: diskdrake/interactive.pm:1033
 #, c-format
 msgid "Various"
 msgstr "杂项"
 
-#: diskdrake/interactive.pm:1092
+#: diskdrake/interactive.pm:1100
 #, c-format
 msgid "device"
 msgstr "设备"
 
-#: diskdrake/interactive.pm:1093
+#: diskdrake/interactive.pm:1101
 #, c-format
 msgid "level"
 msgstr "级别"
 
-#: diskdrake/interactive.pm:1094
+#: diskdrake/interactive.pm:1102
 #, c-format
 msgid "chunk size in KiB"
 msgstr "组块大小(KB)"
 
-#: diskdrake/interactive.pm:1112
+#: diskdrake/interactive.pm:1120
 #, c-format
 msgid "Be careful: this operation is dangerous."
 msgstr "小心: 该操作有危险。"
 
-#: diskdrake/interactive.pm:1127
+#: diskdrake/interactive.pm:1135
 #, c-format
 msgid "Partitioning Type"
 msgstr "分区类型"
 
-#: diskdrake/interactive.pm:1127
+#: diskdrake/interactive.pm:1135
 #, c-format
 msgid "What type of partitioning?"
 msgstr "何种分区类型?"
 
-#: diskdrake/interactive.pm:1165
+#: diskdrake/interactive.pm:1173
 #, c-format
 msgid "You'll need to reboot before the modification can take place"
 msgstr "修改要等到重新启动后才能生效"
 
-#: diskdrake/interactive.pm:1174
+#: diskdrake/interactive.pm:1182
 #, c-format
 msgid "Partition table of drive %s is going to be written to disk"
 msgstr "驱动器 %s 的分区表将会写入磁盘中！"
 
-#: diskdrake/interactive.pm:1196 fs/format.pm:96 fs/format.pm:103
+#: diskdrake/interactive.pm:1204 fs/format.pm:99 fs/format.pm:106
 #, c-format
 msgid "Formatting partition %s"
 msgstr "正在格式化分区 %s"
 
-#: diskdrake/interactive.pm:1209
+#: diskdrake/interactive.pm:1217
 #, c-format
 msgid "After formatting partition %s, all data on this partition will be lost"
 msgstr "格式化分区 %s 之后, 该分区上的所有数据都将丢失"
 
-#: diskdrake/interactive.pm:1218 fs/partitioning.pm:48
+#: diskdrake/interactive.pm:1226 fs/partitioning.pm:48
 #, c-format
 msgid "Check bad blocks?"
 msgstr "是否检查坏磁块?"
 
-#: diskdrake/interactive.pm:1232
+#: diskdrake/interactive.pm:1240
 #, c-format
 msgid "Move files to the new partition"
 msgstr "移动文件到新分区"
 
-#: diskdrake/interactive.pm:1232
+#: diskdrake/interactive.pm:1240
 #, c-format
 msgid "Hide files"
 msgstr "隐藏文件"
 
-#: diskdrake/interactive.pm:1233
+#: diskdrake/interactive.pm:1241
 #, c-format
 msgid ""
 "Directory %s already contains data\n"
@@ -1946,128 +1952,128 @@ msgstr ""
 "您可以选择将文件移动到即将挂载到该目录的分区，或者将其保留在原地(这将导致这些"
 "文件因为其它分区被挂载被隐藏)"
 
-#: diskdrake/interactive.pm:1248
+#: diskdrake/interactive.pm:1256
 #, c-format
 msgid "Moving files to the new partition"
 msgstr "移动文件到新分区"
 
-#: diskdrake/interactive.pm:1252
+#: diskdrake/interactive.pm:1260
 #, c-format
 msgid "Copying %s"
 msgstr "复制 %s"
 
-#: diskdrake/interactive.pm:1256
+#: diskdrake/interactive.pm:1264
 #, c-format
 msgid "Removing %s"
 msgstr "删除 %s"
 
-#: diskdrake/interactive.pm:1270
+#: diskdrake/interactive.pm:1278
 #, c-format
 msgid "partition %s is now known as %s"
 msgstr "分区 %s 现在被识别为 %s"
 
-#: diskdrake/interactive.pm:1271
+#: diskdrake/interactive.pm:1279
 #, c-format
 msgid "Partitions have been renumbered: "
 msgstr "分区已被重新编号: "
 
-#: diskdrake/interactive.pm:1296 diskdrake/interactive.pm:1364
+#: diskdrake/interactive.pm:1304 diskdrake/interactive.pm:1372
 #, c-format
 msgid "Device: "
 msgstr "设备: "
 
-#: diskdrake/interactive.pm:1297
+#: diskdrake/interactive.pm:1305
 #, c-format
 msgid "Volume label: "
 msgstr "卷标: "
 
-#: diskdrake/interactive.pm:1298
+#: diskdrake/interactive.pm:1306
 #, c-format
 msgid "UUID: "
 msgstr "UUDI: "
 
-#: diskdrake/interactive.pm:1299
+#: diskdrake/interactive.pm:1307
 #, c-format
 msgid "DOS drive letter: %s (just a guess)\n"
 msgstr "DOS 下的盘符: %s(只是猜测)\n"
 
-#: diskdrake/interactive.pm:1303 diskdrake/interactive.pm:1312
-#: diskdrake/interactive.pm:1383
+#: diskdrake/interactive.pm:1311 diskdrake/interactive.pm:1320
+#: diskdrake/interactive.pm:1391
 #, c-format
 msgid "Type: "
 msgstr "类型: "
 
-#: diskdrake/interactive.pm:1307 diskdrake/interactive.pm:1368
+#: diskdrake/interactive.pm:1315 diskdrake/interactive.pm:1376
 #, c-format
 msgid "Name: "
 msgstr "名称: "
 
-#: diskdrake/interactive.pm:1314
+#: diskdrake/interactive.pm:1322
 #, c-format
 msgid "Start: sector %s\n"
 msgstr "开始: 第 %s 扇区\n"
 
-#: diskdrake/interactive.pm:1315
+#: diskdrake/interactive.pm:1323
 #, c-format
 msgid "Size: %s"
 msgstr "大小: %s"
 
-#: diskdrake/interactive.pm:1317
+#: diskdrake/interactive.pm:1325
 #, c-format
 msgid ", %s sectors"
 msgstr ", %s 扇区"
 
-#: diskdrake/interactive.pm:1319
+#: diskdrake/interactive.pm:1327
 #, c-format
 msgid "Cylinder %d to %d\n"
 msgstr "柱面 %d 到 %d\n"
 
-#: diskdrake/interactive.pm:1320
+#: diskdrake/interactive.pm:1328
 #, c-format
 msgid "Number of logical extents: %d\n"
 msgstr "逻辑分区数：%d\n"
 
-#: diskdrake/interactive.pm:1321
+#: diskdrake/interactive.pm:1329
 #, c-format
 msgid "Formatted\n"
 msgstr "已格式化\n"
 
-#: diskdrake/interactive.pm:1322
+#: diskdrake/interactive.pm:1330
 #, c-format
 msgid "Not formatted\n"
 msgstr "未格式化\n"
 
-#: diskdrake/interactive.pm:1323
+#: diskdrake/interactive.pm:1331
 #, c-format
 msgid "Mounted\n"
 msgstr "已挂载\n"
 
-#: diskdrake/interactive.pm:1324
+#: diskdrake/interactive.pm:1332
 #, c-format
 msgid "RAID %s\n"
 msgstr "RAID %s\n"
 
-#: diskdrake/interactive.pm:1326
+#: diskdrake/interactive.pm:1334
 #, c-format
 msgid "Encrypted"
 msgstr "已加密"
 
-#: diskdrake/interactive.pm:1326
+#: diskdrake/interactive.pm:1334
 #, c-format
 msgid " (mapped on %s)"
 msgstr " (已映射为 %s)"
 
-#: diskdrake/interactive.pm:1327
+#: diskdrake/interactive.pm:1335
 #, c-format
 msgid " (to map on %s)"
 msgstr "  (应映射为 %s)"
 
-#: diskdrake/interactive.pm:1328
+#: diskdrake/interactive.pm:1336
 #, c-format
 msgid " (inactive)"
 msgstr " (交互)"
 
-#: diskdrake/interactive.pm:1334
+#: diskdrake/interactive.pm:1342
 #, c-format
 msgid ""
 "Loopback file(s):\n"
@@ -2076,7 +2082,7 @@ msgstr ""
 "回环文件: \n"
 "   %s\n"
 
-#: diskdrake/interactive.pm:1335
+#: diskdrake/interactive.pm:1343
 #, c-format
 msgid ""
 "Partition booted by default\n"
@@ -2085,27 +2091,27 @@ msgstr ""
 "预设的启动分区\n"
 "    (给 MS-DOS 启动用的, 跟 lilo 无关)\n"
 
-#: diskdrake/interactive.pm:1337
+#: diskdrake/interactive.pm:1345
 #, c-format
 msgid "Level %s\n"
 msgstr "级别 %s\n"
 
-#: diskdrake/interactive.pm:1338
+#: diskdrake/interactive.pm:1346
 #, c-format
 msgid "Chunk size %d KiB\n"
 msgstr "组块大小 %d KB\n"
 
-#: diskdrake/interactive.pm:1339
+#: diskdrake/interactive.pm:1347
 #, c-format
 msgid "RAID-disks %s\n"
 msgstr "RAID 磁盘 %s\n"
 
-#: diskdrake/interactive.pm:1341
+#: diskdrake/interactive.pm:1349
 #, c-format
 msgid "Loopback file name: %s"
 msgstr "回环文件名称: %s"
 
-#: diskdrake/interactive.pm:1344
+#: diskdrake/interactive.pm:1352
 #, c-format
 msgid ""
 "\n"
@@ -2117,7 +2123,7 @@ msgstr ""
 "此分区很可能是驱动器分区。\n"
 "您最好请不要更改它。\n"
 
-#: diskdrake/interactive.pm:1347
+#: diskdrake/interactive.pm:1355
 #, c-format
 msgid ""
 "\n"
@@ -2129,67 +2135,67 @@ msgstr ""
 "该 Bootstrap 分区特别\n"
 "是保留给双重启动系统。\n"
 
-#: diskdrake/interactive.pm:1356
+#: diskdrake/interactive.pm:1364
 #, c-format
 msgid "Free space on %s (%s)"
 msgstr "%s (%s) 上的空闲空间"
 
-#: diskdrake/interactive.pm:1365
+#: diskdrake/interactive.pm:1373
 #, c-format
 msgid "Read-only"
 msgstr "只读"
 
-#: diskdrake/interactive.pm:1366
+#: diskdrake/interactive.pm:1374
 #, c-format
 msgid "Size: %s\n"
 msgstr "大小: %s\n"
 
-#: diskdrake/interactive.pm:1367
+#: diskdrake/interactive.pm:1375
 #, c-format
 msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
 msgstr "硬盘参数: %s 柱面, %s 磁头, %s 扇区\n"
 
-#: diskdrake/interactive.pm:1369
+#: diskdrake/interactive.pm:1377
 #, c-format
 msgid "Medium type: "
 msgstr "介质类型: "
 
-#: diskdrake/interactive.pm:1370
+#: diskdrake/interactive.pm:1378
 #, c-format
 msgid "LVM-disks %s\n"
 msgstr "LVM 磁盘 %s\n"
 
-#: diskdrake/interactive.pm:1371
+#: diskdrake/interactive.pm:1379
 #, c-format
 msgid "Partition table type: %s\n"
 msgstr "分区表类型: %s\n"
 
-#: diskdrake/interactive.pm:1372
+#: diskdrake/interactive.pm:1380
 #, c-format
 msgid "on channel %d id %d\n"
 msgstr "通道 %d id %d\n"
 
-#: diskdrake/interactive.pm:1416
+#: diskdrake/interactive.pm:1424
 #, c-format
 msgid "Choose your filesystem encryption key"
 msgstr "选择该文件系统的加密密钥"
 
-#: diskdrake/interactive.pm:1419
+#: diskdrake/interactive.pm:1427
 #, c-format
 msgid "This encryption key is too simple (must be at least %d characters long)"
 msgstr "这个加密密钥太简单了(至少要有 %d 个字符)"
 
-#: diskdrake/interactive.pm:1420
+#: diskdrake/interactive.pm:1428
 #, c-format
 msgid "The encryption keys do not match"
 msgstr "两次加密密钥不符"
 
-#: diskdrake/interactive.pm:1424
+#: diskdrake/interactive.pm:1432
 #, c-format
 msgid "Encryption key (again)"
 msgstr "加密密钥(再输入一次)"
 
-#: diskdrake/interactive.pm:1426
+#: diskdrake/interactive.pm:1434
 #, c-format
 msgid "Encryption algorithm"
 msgstr "加密算法"
@@ -2201,7 +2207,7 @@ msgstr "更改类型"
 
 #: diskdrake/smbnfs_gtk.pm:81 interactive.pm:129 interactive.pm:550
 #: interactive/curses.pm:260 interactive/http.pm:104 interactive/http.pm:160
-#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:846 ugtk2.pm:415
+#: interactive/stdio.pm:39 interactive/stdio.pm:148 mygtk2.pm:847 ugtk2.pm:415
 #: ugtk2.pm:517 ugtk2.pm:526 ugtk2.pm:812
 #, c-format
 msgid "Cancel"
@@ -2291,32 +2297,32 @@ msgid ""
 msgstr ""
 "发生错误！新建文件系统时找不到可用的设备。请检查您的硬件以确定问题的原因"
 
-#: fs/any.pm:75 fs/partitioning_wizard.pm:60
+#: fs/any.pm:75 fs/partitioning_wizard.pm:61
 #, c-format
 msgid "You must have a FAT partition mounted in /boot/efi"
 msgstr "您必须有一个FAT分区载入 /boot/efi"
 
-#: fs/format.pm:100
+#: fs/format.pm:103
 #, c-format
 msgid "Creating and formatting file %s"
 msgstr "正在创建和格式化文件 %s"
 
-#: fs/format.pm:119
+#: fs/format.pm:122
 #, c-format
 msgid "I do not know how to set label on %s with type %s"
 msgstr "不知道如何设定 %2$s 类型的 %1$s 卷标"
 
-#: fs/format.pm:126
+#: fs/format.pm:131
 #, c-format
 msgid "setting label on %s failed, is it formatted?"
 msgstr "设定 %s 的卷标失败，该卷是否已格式化？"
 
-#: fs/format.pm:167
+#: fs/format.pm:172
 #, c-format
 msgid "I do not know how to format %s in type %s"
 msgstr "不知道如何将 %s 格式化成 %s 类型"
 
-#: fs/format.pm:172 fs/format.pm:174
+#: fs/format.pm:177 fs/format.pm:179
 #, c-format
 msgid "%s formatting of %s failed"
 msgstr "%s 格式化 %s 失败"
@@ -2496,7 +2502,7 @@ msgstr "检查文件系统 %s 失败。您想修复错误吗?(注意, 有可能�
 msgid "Not enough swap space to fulfill installation, please add some"
 msgstr "交换空间太少, 无法完成安装, 请扩大交换分区。"
 
-#: fs/partitioning_wizard.pm:52
+#: fs/partitioning_wizard.pm:53
 #, c-format
 msgid ""
 "You must have a root partition.\n"
@@ -2507,7 +2513,7 @@ msgstr ""
 "请先创建一个 Linux 分区(或在图中单击现有的一个)。\n"
 "然后在列表里选择“挂载点”, 设为“/”。"
 
-#: fs/partitioning_wizard.pm:57
+#: fs/partitioning_wizard.pm:58
 #, c-format
 msgid ""
 "You do not have a swap partition.\n"
@@ -2518,42 +2524,42 @@ msgstr ""
 "\n"
 "要继续吗?"
 
-#: fs/partitioning_wizard.pm:93
+#: fs/partitioning_wizard.pm:92
 #, c-format
 msgid "Use free space"
 msgstr "使用空闲空间"
 
-#: fs/partitioning_wizard.pm:95
+#: fs/partitioning_wizard.pm:94
 #, c-format
 msgid "Not enough free space to allocate new partitions"
 msgstr "没有足够空闲空间分配给新分区"
 
-#: fs/partitioning_wizard.pm:103
+#: fs/partitioning_wizard.pm:102
 #, c-format
 msgid "Use existing partitions"
 msgstr "使用现存的分区"
 
-#: fs/partitioning_wizard.pm:105
+#: fs/partitioning_wizard.pm:104
 #, c-format
 msgid "There is no existing partition to use"
 msgstr "没有可使用的现存分区"
 
-#: fs/partitioning_wizard.pm:129
+#: fs/partitioning_wizard.pm:128
 #, c-format
 msgid "Computing the size of the Microsoft Windows® partition"
 msgstr "正在计算 Microsoft Windows® 分区的大小"
 
-#: fs/partitioning_wizard.pm:148
+#: fs/partitioning_wizard.pm:164
 #, c-format
 msgid "Use the free space on a Microsoft Windows® partition"
 msgstr "使用在 Microsoft Windows® 分区上的空闲空间"
 
-#: fs/partitioning_wizard.pm:152
+#: fs/partitioning_wizard.pm:168
 #, c-format
 msgid "Which partition do you want to resize?"
 msgstr "您需要改变哪个分区的大小?"
 
-#: fs/partitioning_wizard.pm:162
+#: fs/partitioning_wizard.pm:171
 #, c-format
 msgid ""
 "Your Microsoft Windows® partition is too fragmented. Please reboot your "
@@ -2563,7 +2569,7 @@ msgstr ""
 "您的 Microsoft Windows® 分区有太多碎片, 请重新启动, 进入 Microsoft Windows®, "
 "运行磁盘碎片整理程序, 然后重新开始安装 Mandriva Linux"
 
-#: fs/partitioning_wizard.pm:166
+#: fs/partitioning_wizard.pm:179
 #, c-format
 msgid ""
 "WARNING!\n"
@@ -2597,82 +2603,73 @@ msgstr ""
 "一切就绪后, 请按“%s”。"
 
 #. -PO: keep the double empty lines between sections, this is formatted a la LaTeX
-#: fs/partitioning_wizard.pm:175 fs/partitioning_wizard.pm:498
+#: fs/partitioning_wizard.pm:188 fs/partitioning_wizard.pm:548
 #: interactive.pm:549 interactive/curses.pm:263 ugtk2.pm:519
 #, c-format
 msgid "Next"
 msgstr "下一步"
 
-#: fs/partitioning_wizard.pm:180
+#: fs/partitioning_wizard.pm:194
 #, c-format
 msgid "Partitionning"
 msgstr "分区"
 
-#: fs/partitioning_wizard.pm:180
+#: fs/partitioning_wizard.pm:194
 #, c-format
 msgid "Which size do you want to keep for Microsoft Windows® on partition %s?"
 msgstr "您将保留多少空间给 Microsoft Windows® 分区 %s?"
 
-#: fs/partitioning_wizard.pm:181
+#: fs/partitioning_wizard.pm:195
 #, c-format
 msgid "Size"
 msgstr "大小"
 
-#: fs/partitioning_wizard.pm:191
+#: fs/partitioning_wizard.pm:204
 #, c-format
 msgid "Resizing Microsoft Windows® partition"
 msgstr "改变 Microsoft Windows® 分区大小"
 
-#: fs/partitioning_wizard.pm:196
+#: fs/partitioning_wizard.pm:209
 #, c-format
 msgid "FAT resizing failed: %s"
 msgstr "FAT 调整大小失败: %s"
 
-#: fs/partitioning_wizard.pm:199
-#, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Microsoft Windows®"
-msgstr ""
-"为了保证更改分区大小之后的数据完整性, 在您下次启动进入 Microsoft Windows® 时"
-"可能会自动运行文件系统检查。"
-
-#: fs/partitioning_wizard.pm:212
+#: fs/partitioning_wizard.pm:225
 #, c-format
 msgid "There is no FAT partition to resize (or not enough space left)"
 msgstr "没有 FAT 分区用来调整大小(或者没有足够剩余空间)"
 
-#: fs/partitioning_wizard.pm:217
+#: fs/partitioning_wizard.pm:230
 #, c-format
 msgid "Remove Microsoft Windows®"
 msgstr "删除 Microsoft Windows®"
 
-#: fs/partitioning_wizard.pm:217
+#: fs/partitioning_wizard.pm:230
 #, c-format
 msgid "Erase and use entire disk"
 msgstr "清除并使用整个磁盘"
 
-#: fs/partitioning_wizard.pm:221
+#: fs/partitioning_wizard.pm:234
 #, c-format
 msgid "You have more than one hard drive, which one do you install linux on?"
 msgstr "您有不只一个硬盘, 您要在哪个上面安装 Linux?"
 
-#: fs/partitioning_wizard.pm:229 fsedit.pm:600
+#: fs/partitioning_wizard.pm:242 fsedit.pm:600
 #, c-format
 msgid "ALL existing partitions and their data will be lost on drive %s"
 msgstr "磁盘 %s 上现存的所有分区及其资料将被清除"
 
-#: fs/partitioning_wizard.pm:239
+#: fs/partitioning_wizard.pm:252
 #, c-format
 msgid "Custom disk partitioning"
 msgstr "自定义磁盘分区"
 
-#: fs/partitioning_wizard.pm:245
+#: fs/partitioning_wizard.pm:258
 #, c-format
 msgid "Use fdisk"
 msgstr "使用 fdisk"
 
-#: fs/partitioning_wizard.pm:248
+#: fs/partitioning_wizard.pm:261
 #, c-format
 msgid ""
 "You can now partition %s.\n"
@@ -2681,22 +2678,27 @@ msgstr ""
 "您现在可以在 %s 上分区。\n"
 "做完之后, 不要忘记用“w”命令保存您的修改"
 
-#: fs/partitioning_wizard.pm:388 fs/partitioning_wizard.pm:518
+#: fs/partitioning_wizard.pm:401
+#, fuzzy, c-format
+msgid "Ext2/3/4"
+msgstr "Ext3"
+
+#: fs/partitioning_wizard.pm:431 fs/partitioning_wizard.pm:568
 #, c-format
 msgid "I can not find any room for installing"
 msgstr "我无法找到安装需要的空间"
 
-#: fs/partitioning_wizard.pm:397 fs/partitioning_wizard.pm:525
+#: fs/partitioning_wizard.pm:440 fs/partitioning_wizard.pm:575
 #, c-format
 msgid "The DrakX Partitioning wizard found the following solutions:"
 msgstr "DrakX 分区向导找到下列解决办法:"
 
-#: fs/partitioning_wizard.pm:459
+#: fs/partitioning_wizard.pm:509
 #, c-format
 msgid "Here is the content of your disk drive "
 msgstr "这是您硬盘驱动器的内容 "
 
-#: fs/partitioning_wizard.pm:535
+#: fs/partitioning_wizard.pm:585
 #, c-format
 msgid "Partitioning failed: %s"
 msgstr "分区失败: %s"
@@ -3328,7 +3330,7 @@ msgstr "调谐器类型: "
 
 #: interactive.pm:128 interactive.pm:549 interactive/curses.pm:263
 #: interactive/http.pm:103 interactive/http.pm:156 interactive/stdio.pm:39
-#: interactive/stdio.pm:148 interactive/stdio.pm:149 mygtk2.pm:846
+#: interactive/stdio.pm:148 interactive/stdio.pm:149 mygtk2.pm:847
 #: ugtk2.pm:421 ugtk2.pm:519 ugtk2.pm:812 ugtk2.pm:835
 #, c-format
 msgid "Ok"
@@ -4666,27 +4668,27 @@ msgstr "赞比亚"
 msgid "Zimbabwe"
 msgstr "津巴布韦"
 
-#: lang.pm:1223
+#: lang.pm:1206
 #, c-format
 msgid "Welcome to %s"
 msgstr "欢迎使用 %s"
 
-#: lvm.pm:84
+#: lvm.pm:86
 #, c-format
 msgid "Moving used physical extents to other physical volumes failed"
 msgstr "将已用的物理卷扩展分区移动到其它物理卷失败"
 
-#: lvm.pm:141
+#: lvm.pm:143
 #, c-format
 msgid "Physical volume %s is still in use"
 msgstr "物理卷 %s 仍在使用中"
 
-#: lvm.pm:151
+#: lvm.pm:153
 #, c-format
 msgid "Remove the logical volumes first\n"
 msgstr "请先删除逻辑卷\n"
 
-#: lvm.pm:184
+#: lvm.pm:186
 #, c-format
 msgid "The bootloader can't handle /boot on multiple physical volumes"
 msgstr "引导程序无法识别多个物理卷上的 /boot"
@@ -5157,17 +5159,17 @@ msgstr ""
 "模块 %s 加载失败。\n"
 "您要尝试其它的参数吗?"
 
-#: mygtk2.pm:1540 mygtk2.pm:1541
+#: mygtk2.pm:1541 mygtk2.pm:1542
 #, c-format
 msgid "Password is trivial to guess"
 msgstr "密码很容易猜到"
 
-#: mygtk2.pm:1542
+#: mygtk2.pm:1543
 #, c-format
 msgid "Password should resist to basic attacks"
 msgstr "密码可抵御常见攻击"
 
-#: mygtk2.pm:1543 mygtk2.pm:1544
+#: mygtk2.pm:1544 mygtk2.pm:1545
 #, c-format
 msgid "Password seems secure"
 msgstr "密码好像安全"
@@ -6513,7 +6515,7 @@ msgstr ""
 "  --boot            - 启用配置引导程序\n"
 "默认模式: 可配置自动登录特性"
 
-#: standalone.pm:61
+#: standalone.pm:60
 #, c-format
 msgid ""
 "[OPTIONS] [PROGRAM_NAME]\n"
@@ -6530,7 +6532,7 @@ msgstr ""
 "  --report          - 程序应该是 Mandriva Linux 工具之一\n"
 "  --incident        - 程序应该是 Mandriva Linux 工具之一"
 
-#: standalone.pm:67
+#: standalone.pm:66
 #, c-format
 msgid ""
 "[--add]\n"
@@ -6547,7 +6549,7 @@ msgstr ""
 "  --internet        - 配置 Internet\n"
 "  --wizard          - 同 --add"
 
-#: standalone.pm:73
+#: standalone.pm:72
 #, c-format
 msgid ""
 "\n"
@@ -6578,7 +6580,7 @@ msgstr ""
 "                 :应用程序名, 如 so 代表 staroffice \n"
 "                 :gs 代表 ghostscript, 仅在此处可用。"
 
-#: standalone.pm:88
+#: standalone.pm:87
 #, c-format
 msgid ""
 "[OPTIONS]...\n"
@@ -6606,17 +6608,17 @@ msgstr ""
 "--addclient      :将客户机添加到 MTS(需要 MAC 地址、IP、nbi 映像名称)\n"
 "--delclient      :将客户机从 MTS 中删除(需要 MAC 地址、IP、nbi 映像名称)"
 
-#: standalone.pm:100
+#: standalone.pm:99
 #, c-format
 msgid "[keyboard]"
 msgstr "[键盘]"
 
-#: standalone.pm:101
+#: standalone.pm:100
 #, c-format
 msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 
-#: standalone.pm:102
+#: standalone.pm:101
 #, c-format
 msgid ""
 "[OPTIONS]\n"
@@ -6639,7 +6641,7 @@ msgstr ""
 "--status: 如果连接则返回 1 否则返回 0, 然后退出。\n"
 "--quiet: 不进行交互。用于断开连接。"
 
-#: standalone.pm:112
+#: standalone.pm:111
 #, c-format
 msgid ""
 "[OPTION]...\n"
@@ -6656,7 +6658,7 @@ msgstr ""
 "  --changelog-first      在描述窗口中的文件列表前显示更改日志\n"
 "  --merge-all-rpmnew     计划合并找到的所有 .rpmnew/.rpmsave 文件"
 
-#: standalone.pm:117
+#: standalone.pm:116
 #, c-format
 msgid ""
 "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
@@ -6665,7 +6667,7 @@ msgstr ""
 "[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
 "usbtable] [--dynamic=dev]"
 
-#: standalone.pm:118
+#: standalone.pm:117
 #, c-format
 msgid ""
 " [everything]\n"
@@ -6676,7 +6678,7 @@ msgstr ""
 "       XFdrake [--noauto] 显示器\n"
 "       XFdrake 分辨率"
 
-#: standalone.pm:154
+#: standalone.pm:153
 #, c-format
 msgid ""
 "\n"
@@ -6765,3 +6767,10 @@ msgstr ""
 #, c-format
 msgid "Installation failed"
 msgstr "安装失败"
+
+#~ msgid ""
+#~ "To ensure data integrity after resizing the partition(s), \n"
+#~ "filesystem checks will be run on your next boot into Microsoft Windows®"
+#~ msgstr ""
+#~ "为了保证更改分区大小之后的数据完整性, 在您下次启动进入 Microsoft Windows® "
+#~ "时可能会自动运行文件系统检查。"