updated pot file

1 files changed, 11244 insertions, 11185 deletions

diff --git a/perl-install/share/po/th.po b/perl-install/share/po/th.po
index 1a1e107f3..2d4ae6595 100644
--- a/perl-install/share/po/th.po
+++ b/perl-install/share/po/th.po
@@ -5,7 +5,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX\n"
-"POT-Creation-Date: 2003-03-24 22:30+0100\n"
+"POT-Creation-Date: 2003-05-16 14:13+0200\n"
 "PO-Revision-Date: 2001-09-10 14:24GMT+7\n"
 "Last-Translator: Wachara Chinsettawong <wachara@yahoo.com>\n"
 "Language-Team: Thai <th@li.org>\n"
@@ -14,2554 +14,604 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "X-Generator: KBabel 0.9.5\n"
 
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"The per-user sharing uses the group \"fileshare\". \n"
-"You can use userdrake to add a user to this group."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_steps_gtk.pm:1
-#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
-#: ../../interactive/stdio.pm:1 ../../network/netconnect.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakautoinst:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
-#: ../../standalone/drakfont:1 ../../standalone/drakgw:1
-#: ../../standalone/draksec:1 ../../standalone/logdrake:1
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Cancel"
-msgstr "ยกเลิก"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Launch userdrake"
-msgstr ""
-
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Would you like to allow users to share some of their directories?\n"
-"Allowing this will permit users to simply click on \"Share\" in konqueror "
-"and nautilus.\n"
-"\n"
-"\"Custom\" permit a per-user granularity.\n"
-msgstr ""
+msgid "Scanning partitions to find mount points"
+msgstr "Scanning partitions to find mount points"
 
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Mandatory package %s is missing"
+msgid "if set to yes, check additions/removals of suid root files."
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You can export using NFS or Samba. Please select which you'd like to use."
-msgstr ""
-
-#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
-#, fuzzy, c-format
-msgid "The package %s needs to be installed. Do you want to install it?"
+msgid "\t\tErase=%s"
 msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-
-#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Custom"
-msgstr "แบบปรับแก้ได้ (Customized) "
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Allow all users"
-msgstr "เพิ่มผู้ใช้"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "No sharing"
-msgstr "ไม่มีเครื่องพิมพ์"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "More"
-msgstr "More"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Here is the full list of available countries"
-msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "Please choose your country."
-msgstr "คุณมีเม้าส์ชนิดใด"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid " / Region"
-msgstr "ขนาดจอภาพ"
 
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Country"
-msgstr "เม้าท์"
+msgid "network printer port"
+msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
 
-#: ../../any.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "All languages"
-msgstr "เลือกภาษาที่คุณใช้"
+msgid "Please insert floppy disk:"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Use Unicode by default"
-msgstr ""
+msgid "PCMCIA"
+msgstr "PCMCIA"
 
-#: ../../any.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Mandrake Linux can support multiple languages. Select\n"
-"the languages you would like to install. They will be available\n"
-"when your installation is complete and you restart your system."
-msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
+"The backup partition table has not the same size\n"
+"Still continue?"
+msgstr ""
+"พาร์ติชั่นแบ็คอัพไม่มีขนาดเท่ากัน\n"
+"ต้องการทำต่อหรือไม่?"
 
-#: ../../any.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid "Please choose a language to use."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the window manager to run:"
-msgstr "เลือก window manager:"
+msgid "Which username"
+msgstr "ชื่อผู้ใช้"
 
 #: ../../any.pm:1
 #, c-format
-msgid "Choose the default user:"
-msgstr "เลือกผู้ใช้ default"
+msgid "Which type of entry do you want to add?"
+msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"
 
-#: ../../any.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Do you want to use this feature?"
-msgstr "คุณต้องการใช้ aboot หรือไม่"
+msgid "Restore partition table"
+msgstr "กู้ตารางพาร์ติชั่น"
 
-#: ../../any.pm:1
+#: ../../printer/cups.pm:1
 #, fuzzy, c-format
-msgid "I can set up your computer to automatically log on one user."
-msgstr ""
-"ผมไม่สามารถทำให้ท่านเข้าทำงานโดยใช้ชื่อคนคนหนึ่งแบบอัตโนมัติ\n"
-"ถ้าคุณไม่ต้องการใช้งานรูปแบบนี้กรุณากดปุ่มยกเลิก"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Autologin"
-msgstr "Autologin"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Icon"
-msgstr "Icon"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Shell"
-msgstr "เชลล์ที่ใช้"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Password (again)"
-msgstr "รหัสผ่าน (ใส่อีกครั้ง)"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Password"
-msgstr "รหัสผ่าน"
-
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
-#, c-format
-msgid "User name"
-msgstr "ชื่อผู้ใช้"
+msgid "On CUPS server \"%s\""
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
 
-#: ../../any.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Real name"
-msgstr "ชื่อเต็ม"
+msgid "Post-install configuration"
+msgstr "การคอนฟิกหลังการติดตั้ง"
 
-#: ../../any.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Accept user"
-msgstr "ยอมรับผู้ใช้"
+msgid "Use ``%s'' instead"
+msgstr "ใช้ ``%s'' แทน"
 
-#: ../../any.pm:1 ../../diskdrake/dav.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
-#: ../../interactive/http.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/scannerdrake:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "Done"
-msgstr "ทำเรียบร้อยแล้ว"
+msgid "Type"
+msgstr "ประเภท"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Enter a user\n"
-"%s"
+"\n"
+"Also printers configured with the PPD files provided by their manufacturers "
+"or with native CUPS drivers cannot be transferred."
 msgstr ""
-"ให้ใส่ผู้ใช้\n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Add user"
-msgstr "เพิ่มผู้ใช้"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "This user name has already been added"
-msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
+msgid "Sri Lanka"
+msgstr ""
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "The user name is too long"
-msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
-
-#: ../../any.pm:1
-#, c-format
 msgid ""
-"The user name must contain only lower cased letters, numbers, `-' and `_'"
-msgstr "ชื่อผู้ใช้จะสามารถมีได้เฉพาะตัวอักษรตัวเล็ก ตัวเลข '-' และ '_'"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Please give a user name"
-msgstr "โปรดป้อนชื่อผู้ใช้"
-
-#: ../../any.pm:1
-#, c-format
-msgid "This password is too simple"
-msgstr "รหัสผ่านนี้ง่ายต่อการเดา"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Please try again"
-msgstr "โปรดลองอีกครั้ง"
-
-#: ../../any.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "The passwords do not match"
-msgstr "รหัสผ่านไม่เหมือนกัน"
-
-#: ../../any.pm:1
-#, c-format
-msgid "(already added %s)"
-msgstr "(เพิ่ม %s เรียบร้อยแล้ว)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to compilation tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to network tools"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "access to administrative files"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "allow \"su\""
-msgstr ""
+"The following printer\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
 
-#: ../../any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "access to rpm tools"
+msgid "Central African Republic"
 msgstr ""
 
-#: ../../any.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "access to X programs"
-msgstr ""
+msgid "Gateway device"
+msgstr "อุปกรณ์เกตเวย์"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Here are the entries on your boot menu so far.\n"
-"You can create additional entries or change the existing ones."
+msgid "Net Method:"
 msgstr ""
-"ต่อไปนี้เป็นข้อมูลต่างๆ\n"
-"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (windows...)"
-msgstr "ระบบปฏิบัติการอื่นๆ (วินโดวส์...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (MacOS...)"
-msgstr "ระบบปฏิบัติการอื่นๆ (Mac OS...)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Other OS (SunOS...)"
-msgstr "ระบบปฏิบัติการอื่นๆ (SunOS...)"
-
-#: ../../any.pm:1 ../../standalone/drakbackup:1
-#, c-format
-msgid "Linux"
-msgstr "ลีนุกซ์"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Which type of entry do you want to add?"
-msgstr "ข้อมูลประเภทใดที่คุณต้องการเพิ่ม"
 
-#: ../../any.pm:1
-#, c-format
-msgid "This label is already used"
-msgstr "หัวข้อนี้ถูกใช้ไปเรียบร้อยแล้ว"
-
-#: ../../any.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "You must specify a root partition"
-msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
-
-#: ../../any.pm:1
-#, c-format
-msgid "You must specify a kernel image"
-msgstr ""
-
-#: ../../any.pm:1
-#, c-format
-msgid "Empty label not allowed"
-msgstr "ไม่อนุญาตให้มีหัวข้อว่าง"
-
-#: ../../any.pm:1 ../../harddrake/v4l.pm:1
-#, c-format
-msgid "Default"
-msgstr "Default"
-
-#: ../../any.pm:1
-#, c-format
-msgid "NoVideo"
-msgstr "NoVideo"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd-size"
-msgstr "Initrd-size"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Append"
-msgstr "Append"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Label"
-msgstr "Label"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Unsafe"
-msgstr "Unsafe"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Table"
-msgstr "Table"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Root"
-msgstr "Root"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Read-write"
-msgstr "Read-write"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Initrd"
-msgstr "Initrd"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Video mode"
-msgstr "โหมดของการแสดงผล"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Image"
-msgstr "Image"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Default OS?"
-msgstr "Default OS?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable OF Boot?"
-msgstr "Enable OF Boot?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable CD Boot?"
-msgstr "Enable CD Boot?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Kernel Boot Timeout"
-msgstr "Kernel Boot Timeout"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Open Firmware Delay"
-msgstr "Open Firmware Delay"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Boot device"
-msgstr "อุปกรณ์บูต"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Init Message"
-msgstr "ข้อความ init"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader to use"
-msgstr "Bootloader ที่จะใช้"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader main options"
-msgstr "อ๊อปชั่นหลักของ Bootloader"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"Option ``Restrict command line options'' is of no use without a password"
-msgstr "อ็อปชั่น ``อ๊อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์'' จะต้องใส่รหัสผ่านด้วย"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Give the ram size in MB"
-msgstr "ให้ป้อนข้อมูลของขนาดหน่วยความจำเป็น Mb"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Enable multiple profiles"
-msgstr "Enable multiple profiles"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Precise RAM size if needed (found %d MB)"
-msgstr "กำหนดค่าหน่วยความจำ (RAM) ให้ถูกต้องถ้าต้องการ (ระบบพบ %d MB)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Clean /tmp at each boot"
-msgstr "ลบ /tmp ตอน boot ทุกครั้ง"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Create a bootdisk"
-msgstr "สร้างแผ่นบูต"
-
-#: ../../any.pm:1
-#, c-format
-msgid "restrict"
-msgstr "จำเพาะ"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Restrict command line options"
-msgstr "อ็อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์"
+msgid "Ethernetcard"
+msgstr "Ethernet Card"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Force No APIC"
-msgstr ""
+msgid "Parameters"
+msgstr "Parameters"
 
-#: ../../any.pm:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "Enable ACPI"
-msgstr "Enable CD Boot?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Delay before booting default image"
-msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"
-
-#: ../../any.pm:1
-#, c-format
-msgid "compact"
-msgstr "แบบอัด (compact)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Compact"
-msgstr "แบบอัด (Compact)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Bootloader installation"
-msgstr "การติดตั้ง Bootloader"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of boot partition"
-msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First sector of drive (MBR)"
-msgstr "เซ็กเตอร์แรกของไดรว์ (MBR)"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Where do you want to install the bootloader?"
-msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
-
-#: ../../any.pm:1
-#, c-format
-msgid "LILO/grub Installation"
-msgstr "การติดตั้ง LILO/grub"
+msgid "Auto-detect"
+msgstr "ใช้ auto detection"
 
-#: ../../any.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "SILO Installation"
-msgstr "การติดตั้ง SILO"
+msgid "Interface:"
+msgstr "Interface:"
 
-#: ../../any.pm:1 ../../printer/printerdrake.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Skip"
-msgstr "ข้ามไป"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "On Floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
-
-#: ../../any.pm:1
-#, fuzzy, c-format
-msgid "First sector of the root partition"
-msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
+msgid "Select installation class"
+msgstr "เลือกชุดการติดตั้ง"
 
-#: ../../any.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"You decided to install the bootloader on a partition.\n"
-"This implies you already have a bootloader on the hard drive you boot (eg: "
-"System Commander).\n"
-"\n"
-"On which drive are you booting?"
+msgid "on CDROM"
 msgstr ""
 
-#: ../../any.pm:1
-#, c-format
-msgid "Creating bootdisk..."
-msgstr "กำลังสร้างแผ่นบูต"
-
-#: ../../any.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "Insert a floppy in %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Choose the floppy drive you want to use to make the bootdisk"
-msgstr "ให้เลือกฟล้อปปี้ไดรว์ที่คุณต้องการทำเป็นแผ่นบูต"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Second floppy drive"
-msgstr "Floppy Drive เครื่องที่สอง"
-
-#: ../../any.pm:1
-#, c-format
-msgid "First floppy drive"
-msgstr "Floppy Drive เครื่องแรก"
-
-#: ../../any.pm:1
-#, c-format
-msgid "Sorry, no floppy drive available"
-msgstr "ขออภัย ไม่มีฟล้อปปี้ไดรว์เลย"
-
-#: ../../any.pm:1
-#, c-format
-msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"LILO (or grub) on your system, or another operating system removes LILO, or "
-"LILO doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures. Would you like to create a bootdisk for your system?\n"
-"%s"
-msgstr ""
-"บูตดิสก์แบบแก้ไขได้ตามความต้องการของผู้ใช้ จะช่วยให้คุณสามารถบูตระบบลีนุกซ์\n"
-"ไม่ต้องเข้าสู่กระบวนการของบูตโหลดเดอร์ตามปกติ ซึ่งจะเป็นประโยชน์มากหากคุณ\n"
-"ไม่ได้ติดตั้ง LILO ลงในระบบของคุณ หรือหาก LILO ถูกลบออกไปเนื่องจากมีการ\n"
-"ระบบปฏิบัติการแบบอื่นๆ หรือ LILO ไม่ทำงานกับการคอนฟิกฮาร์ดแวร์ แผ่นบูตดิสก์\n"
-"จะสามารถใช้กับอิมเมจกู้คืนระบบของแมนเดร็ก ซึ่งจะช่วยให้คุณสามารถทำการกู้\n"
-"คืนระบบจากความผิดพลาดได้ด้วย คุณต้องการจะสร้างแผ่นบูตหรือไม่? \n"
-"%s"
-
-#: ../../any.pm:1
-#, c-format
 msgid ""
-"\n"
-"\n"
-"(WARNING! You're using XFS for your root partition,\n"
-"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
-"because XFS needs a very large driver)."
+"The system doesn't seem to be connected to the Internet.\n"
+"Try to reconfigure your connection."
 msgstr ""
+"ไม่สามารถต่อเข้า Internet \n"
+"ลองทำการคอนฟิกใหม่อีกครั้ง"
 
-#: ../../any.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"A custom bootdisk provides a way of booting into your Linux system without\n"
-"depending on the normal bootloader. This is useful if you don't want to "
-"install\n"
-"SILO on your system, or another operating system removes SILO, or SILO "
-"doesn't\n"
-"work with your hardware configuration. A custom bootdisk can also be used "
-"with\n"
-"the Mandrake rescue image, making it much easier to recover from severe "
-"system\n"
-"failures.\n"
+"Connect your printer to a Linux server and let your Windows machine(s) "
+"connect to it as a client.\n"
 "\n"
-"If you want to create a bootdisk for your system, insert a floppy in the "
-"first\n"
-"drive and press \"Ok\"."
+"Do you really want to continue setting up this printer as you are doing now?"
 msgstr ""
-"บูตดิสก์แบบแก้ไขได้ตามความต้องการของผู้ใช้ จะช่วยให้คุณสามารถบูตระบบลีนุกซ์\n"
-"ไม่ต้องเข้าสู่กระบวนการของบูตโหลดเดอร์ตามปกติ ซึ่งจะเป็นประโยชน์มากหากคุณ\n"
-"ไม่ได้ติดตั้ง LILO ลงในระบบของคุณ หรือหาก LILO ถูกลบออกไปเนื่องจากมีการ\n"
-"ระบบปฏิบัติการแบบอื่นๆ หรือ LILO ไม่ทำงานกับการคอนฟิกฮาร์ดแวร์ แผ่นบูตดิสก์\n"
-"จะสามารถใช้กับอิมเมจกู้คืนระบบของแมนเดร็ก ซึ่งจะช่วยให้คุณสามารถทำการกู้\n"
-"คืนระบบจากความผิดพลาดได้ด้วย คุณต้องการจะสร้างแผ่นบูตหรือไม่?\n"
-"ถ้าใช่ กรุณาใส่แผ่น Diskette และกด \"OK\""
 
-#: ../../bootloader.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "You can't install the bootloader on a %s partition\n"
-msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "not enough room in /boot"
-msgstr "ไม่มีที่พอใน /boot"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "The highlighted entry will be booted automatically in %d seconds."
-msgstr "OS ที่ถูกเลือกจะทำการ boot ใน %d วินาที"
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "commands before booting, or 'c' for a command-line."
-msgstr "คำสั่งก่อน boot, หรือ 'c' ถ้าต้องการ command-line."
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Press enter to boot the selected OS, 'e' to edit the"
-msgstr "กรุณากด enter ระบบที่ต้องการ 'e' เพื่อเปลี่ยนแปลง "
-
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Use the %c and %c keys for selecting which entry is highlighted."
-msgstr "ใช้ %c และ %c เพื่อเลือก."
-
-# NOTE: this message will be displayed by grub at boot time; that is
-# using the BIOS font; that means cp437 charset on 99.99% of PC computers
-# out there. It is the nsuggested that for non latin languages an ascii
-# transliteration be used; or maybe the english text be used; as it is best
-#
-# The lines must fit on screen, aka length < 80
-# and only one line per string for the GRUB messages
-#
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#. -PO: and keep them smaller than 79 chars long
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Welcome to GRUB the operating system chooser!"
-msgstr "ยินดีต้อนรับสู่ GRUB the operating system chooser!"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Yaboot"
-msgstr "Yaboot"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "Grub"
-msgstr "Grub"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with text menu"
-msgstr "LILO แบบ text menu"
-
-#: ../../bootloader.pm:1
-#, c-format
-msgid "LILO with graphical menu"
-msgstr "LILO แบบ graphical menu"
+msgid "Belarus"
+msgstr "Belarusian"
 
-#: ../../bootloader.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "SILO"
-msgstr "SILO"
+msgid "Error writing to file %s"
+msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
 
-# NOTE: this message will be displayed at boot time; that is
-# only the ascii charset will be available on most machines
-# so use only 7bit for this message (and do transliteration or
-# leave it in English, as it is the best for your language)
-#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
-#: ../../bootloader.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Welcome to %s the operating system chooser!\n"
-"\n"
-"Choose an operating system from the list above or\n"
-"wait %d seconds for default boot.\n"
-"\n"
-msgstr ""
-"ยินดีต้อนรับสู่ %s โปรแกรมเลือกใช้ระบบปฏิบัติการ!\n"
-"\n"
-"เลือกระบบปฏิบัติการหรือ\n"
-"รอ %d วินาทีเพื่อใช้การบูตจากตัวเลือกตั้งต้น\n"
-"\n"
-
-#: ../../common.pm:1
-#, c-format
-msgid "consolehelper missing"
+"apmd is used for monitoring battery status and logging it via syslog.\n"
+"It can also be used for shutting down the machine when the battery is low."
 msgstr ""
+"apmd คือโปรแกรมดูแลสถานะของ battery \n"
+"มันสามารถจะปิดเครื่องเมื่อเวลา battery มีไฟน้อย"
 
-#: ../../common.pm:1
-#, c-format
-msgid "kdesu missing"
-msgstr "ไม่มี kdesu "
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Screenshots will be available after install in %s"
-msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
-
-#: ../../common.pm:1
-#, fuzzy, c-format
-msgid "Can't make screenshots before partitioning"
-msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d seconds"
-msgstr "%d วินาที"
-
-#: ../../common.pm:1
-#, c-format
-msgid "1 minute"
-msgstr "1 นาที"
-
-#: ../../common.pm:1
-#, c-format
-msgid "%d minutes"
-msgstr "%d นาที"
-
-#: ../../common.pm:1
-#, c-format
-msgid "TB"
-msgstr "TB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "GB"
-msgstr "GB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "MB"
-msgstr "MB"
-
-#: ../../common.pm:1
-#, c-format
-msgid "KB"
-msgstr "KB"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "United States"
-msgstr "สหรัฐอเมริกา"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Austria"
-msgstr "พอร์ตอนุกรม"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "Italy"
-msgstr "อิตาลี"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Netherlands"
-msgstr "เนเธอร์แลนด์"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Sweden"
-msgstr "สวีเดน"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Norway"
-msgstr "นอร์เวย์"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Greece"
-msgstr "กรีก"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Germany"
-msgstr "เยอรมัน"
+msgid "Use tape to backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
 
-#: ../../crypto.pm:1 ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Czech Republic"
-msgstr "สาธารณรัฐเช็ค"
-
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Belgium"
-msgstr "เบลเยี่ยม"
+msgid "The following packages are going to be installed"
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
 
-#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "France"
-msgstr "ฝรั่งเศษ"
-
-#: ../../crypto.pm:1 ../../lang.pm:1
-#, c-format
-msgid "Costa Rica"
-msgstr "คอสตาริกา"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Error opening %s for writing: %s"
-msgstr "เกิดข้อผิดพลาดในการเปิด %s สำหรับการเขียน: %s"
+msgid "CUPS configuration"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../fsedit.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Nothing to do"
+msgid "Hong Kong"
 msgstr ""
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "Not enough free space for auto-allocating"
-msgstr "ไม่มีพื้นที่เพียงพอสำหรับการแบ่งสัดส่วนพาร์ติชั่นแบบออโต้"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid "You can't use an encrypted file system for mount point %s"
-msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
-msgid ""
-"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
-"point\n"
-msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"
-
-#: ../../fsedit.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "This directory should remain within the root filesystem"
-msgstr "This directory should remain within the root filesystem"
+msgid "Not enough free space to allocate new partitions"
+msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
 
-#: ../../fsedit.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "You can't use a LVM Logical Volume for mount point %s"
-msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
+msgid "Moving"
+msgstr "ย้าย"
 
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
+#: ../../standalone/drakbackup:1
+#, c-format
 msgid ""
-"You've selected a software RAID partition as root (/).\n"
-"No bootloader is able to handle this without a /boot partition.\n"
-"Please be sure to add a /boot partition"
+"\n"
+"Drakbackup activities via %s:\n"
+"\n"
 msgstr ""
-"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
-"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
-"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "There is already a partition with mount point %s\n"
-msgstr "มีพาร์ติชั่นที่เป็นจุดเม้าท์ที่ %s เรียบร้อยแล้ว\n"
-
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mount points should contain only alphanumerical characters"
+msgid "("
 msgstr ""
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "Mount points must begin with a leading /"
-msgstr "จุดเม้าท์จะต้องเริ่มด้วย /"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "You can't use ReiserFS for partitions smaller than 32MB"
-msgstr "คุณไม่สามารถใช้ ReiserFS สำหรับพาร์ติชั่นที่น้อยกว่า 32MB ได้"
-
-#: ../../fsedit.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "You can't use JFS for partitions smaller than 16MB"
-msgstr "คุณไม่สามารถใช้ JFS สำหรับพาร์ติชั่นที่น้อยกว่า 16MB ได้"
-
-#: ../../fsedit.pm:1
-#, fuzzy, c-format
 msgid ""
-"I can't read the partition table of device %s, it's too corrupted for me :(\n"
-"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
-"The other solution is to not allow DrakX to modify the partition table.\n"
-"(the error is %s)\n"
+"Welcome to The Network Configuration Wizard.\n"
 "\n"
-"Do you agree to loose all the partitions?\n"
+"We are about to configure your internet/network connection.\n"
+"If you don't want to use the auto detection, deselect the checkbox.\n"
 msgstr ""
-"ผมไม่สามารถอ่านตารางพาร์ติชั่นได้ มันเสียหายมากเกินไป \n"
-"ผมสามารถพยายามลบข้อมูลข้อมูลในพาร์ติชั่นที่เสียหาย\n"
-"อีกทางเลือกคือไม่ให้ DrakX ทำการเปลี่ยนแปลงตาราง\n"
-"ข้อความผิดพลาดคือ %s\n"
+"ยินดีต้อนรับสู่ Network Configuration Wizard\n"
 "\n"
-"คุณแน่ใจว่าจะยอมให้พาร์ติชั่นทั้งหมดถูกลบไป\n"
-
-#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
-#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
-#, c-format
-msgid "Error"
-msgstr "ผิดพลาด"
-
-#: ../../fsedit.pm:1
-#, c-format
-msgid "server"
-msgstr "เซิร์ฟเวอร์"
+"เรากำลังจะปรับแต่ง internet/network \n"
+"ถ้าคุณไม่ต้องการ auto detection กรุณายกเลิก checkbox.\n"
 
-#: ../../fsedit.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, c-format
-msgid "with /usr"
+msgid ")"
 msgstr ""
 
-#: ../../fsedit.pm:1
-#, c-format
-msgid "simple"
-msgstr "ง่าย"
-
-#: ../../fs.pm:1
-#, fuzzy, c-format
-msgid "Enabling swap partition %s"
-msgstr "ฟอร์แมตพาร์ติชั่น %s"
-
-#: ../../fs.pm:1 ../../partition_table.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "error unmounting %s: %s"
-msgstr "ผิดพลาดยกเลิกการเม้าท์ %s: %s"
+msgid "Lebanon"
+msgstr ""
 
-#: ../../fs.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "mounting partition %s in directory %s failed"
-msgstr ""
+msgid "MM HitTablet"
+msgstr "MM HitTablet"
 
-#: ../../fs.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Mounting partition %s"
-msgstr "ฟอร์แมตพาร์ติชั่น %s"
+msgid "Stop"
+msgstr "เซ็กเตอร์"
 
-#: ../../fs.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Checking %s"
-msgstr "ความละเอียดของภาพ %s\n"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Formatting partition %s"
-msgstr "ฟอร์แมตพาร์ติชั่น %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "Creating and formatting file %s"
-msgstr "กำลังสร้างและ format ไฟล์ %s"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "I don't know how to format %s in type %s"
-msgstr "ไม่ทราบว่าจะฟอร์แมต %s เป็นชนิด %s ได้อย่างไร"
-
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "กำลังฟอร์แมต %s ของ %s ที่มีปัญหา"
+msgid "Edit selected host"
+msgstr "ค้นพบ %s"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"Click on \"Next ->\" if you want to delete all data and partitions present\n"
-"on this hard drive. Be careful, after clicking on \"Next ->\", you will not\n"
-"be able to recover any data and partitions present on this hard drive,\n"
-"including any Windows data.\n"
-"\n"
-"Click on \"<- Previous\" to stop this operation without losing any data and\n"
-"partitions present on this hard drive."
-msgstr ""
-"กด \"OK\" ถ้าคุณต้องการลบข้อมูลทั้งหมดบน harddisk นี้\n"
-"นี่รวมถึง partitions ทั้งหมดซึ่งรวมถึง Windows ด้วย\n"
-"\n"
-"\n"
-"กด \"ยกเลิก\" เพื่อยกเสิกการทำงานนี้"
+msgid "No CD device defined!"
+msgstr "เลือกไฟล์"
 
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid ""
-"Choose the hard drive you want to erase in order to install your new\n"
-"Mandrake Linux partition. Be careful, all data present on it will be lost\n"
-"and will not be recoverable!"
-msgstr ""
-"เลือก harddisk ที่ต้องการลบและลง Mandrake Linux\n"
-"ควรระวังเป็นอย่างมากดพราะว่าข้อมูลทุกอย่างจะถูกลบ\n"
-"และจะไม่สามารถกู้คืนได้"
+msgid "Bulgarian (phonetic)"
+msgstr "อาร์เมเนียน (โฟเนติค)"
 
-#: ../../help.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"As a review, DrakX will present a summary of various information it has\n"
-"about your system. Depending on your installed hardware, you may have some\n"
-"or all of the following entries. Each entry is made up of the configuration\n"
-"item to be configured, followed by a quick summary of the current\n"
-"configuration. Click on the corresponding \"Configure\" button to change\n"
-"that.\n"
-"\n"
-" * \"Keyboard\": check the current keyboard map configuration and change\n"
-"that if necessary.\n"
-"\n"
-" * \"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list.\n"
-"\n"
-" * \"Timezone\": By default, DrakX deduces your time zone based on the\n"
-"country you have chosen. You can click on the \"Configure\" button here if\n"
-"this is not correct.\n"
-"\n"
-" * \"Mouse\": check the current mouse configuration and click on the button\n"
-"to change it if necessary.\n"
-"\n"
-" * \"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation.\n"
-"\n"
-" * \"Sound card\": if a sound card is detected on your system, it is\n"
-"displayed here. If you notice the sound card displayed is not the one that\n"
-"is actually present on your system, you can click on the button and choose\n"
-"another driver.\n"
-"\n"
-" * \"Graphical Interface\": by default, DrakX configures your graphical\n"
-"interface in \"800x600\" or \"1024x768\" resolution. If that does not suits\n"
-"you, click on \"Configure\" to reconfigure your graphical interface.\n"
-"\n"
-" * \"TV card\": if a TV card is detected on your system, it is displayed\n"
-"here. If you have a TV card and it is not detected, click on \"Configure\"\n"
-"to try to configure it manually.\n"
-"\n"
-" * \"ISDN card\": if an ISDN card is detected on your system, it will be\n"
-"displayed here. You can click on \"Configure\" to change the parameters\n"
-"associated with the card.\n"
-"\n"
-" * \"Network\": If you want to configure your Internet or local network\n"
-"access now.\n"
-"\n"
-" * \"Security Level\": this entry offers you to redefine the security level\n"
-"as set in a previous step ().\n"
-"\n"
-" * \"Firewall\": if you plan to connect your machine to the Internet, it's\n"
-"a good idea to protect you from intrusions by setting up a firewall.\n"
-"Consult the corresponding section of the ``Starter Guide'' for details\n"
-"about firewall settings.\n"
-"\n"
-" * \"Bootloader\": if you wish to change your bootloader configuration,\n"
-"click that button. This should be reserved to advanced users.\n"
-"\n"
-" * \"Services\": you'll be able here to control finely which services will\n"
-"be run on your machine. If you plan to use this machine as a server it's a\n"
-"good idea to review this setup."
+msgid "The DHCP start ip"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\"Sound card\": if a sound card is detected on your system, it is displayed\n"
-"here. If you notice the sound card displayed is not the one that is\n"
-"actually present on your system, you can click on the button and choose\n"
-"another driver."
-msgstr ""
+msgid "256 kB"
+msgstr "256 kB"
 
-#: ../../help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
-"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
-"detected and installed in the bootloader menu. If this is not the case, you\n"
-"can add an entry by hand in this screen. Be careful to choose the correct\n"
-"parameters.\n"
-"\n"
-"Yaboot's main options are:\n"
-"\n"
-" * Init Message: a simple text message displayed before the boot prompt.\n"
-"\n"
-" * Boot Device: indicates where you want to place the information required\n"
-"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
-"to hold this information.\n"
-"\n"
-" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
-"yaboot. The first delay is measured in seconds and at this point, you can\n"
-"choose between CD, OF boot, MacOS or Linux;\n"
-"\n"
-" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
-"After selecting Linux, you will have this delay in 0.1 second before your\n"
-"default kernel description is selected;\n"
-"\n"
-" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
-"at the first boot prompt.\n"
-"\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
-"Open Firmware at the first boot prompt.\n"
-"\n"
-" * Default OS: you can select which OS will boot by default when the Open\n"
-"Firmware Delay expires."
-msgstr ""
+msgid "Bootloader main options"
+msgstr "อ๊อปชั่นหลักของ Bootloader"
 
-#: ../../help.pm:1
+#: ../../standalone.pm:1
 #, c-format
 msgid ""
-"You can add additional entries in yaboot for other operating systems,\n"
-"alternate kernels, or for an emergency boot image.\n"
-"\n"
-"For other OSs, the entry consists only of a label and the \"root\"\n"
-"partition.\n"
-"\n"
-"For Linux, there are a few possible options:\n"
-"\n"
-" * Label: this is the name you will have to type at the yaboot prompt to\n"
-"select this boot option.\n"
-"\n"
-" * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
-"or a variation of vmlinux with an extension.\n"
-"\n"
-" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
-"\n"
-" * Append: on Apple hardware, the kernel append option is often used to\n"
-"assist in initializing video hardware, or to enable keyboard mouse button\n"
-"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
-"The following are some examples:\n"
-"\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
-"hda=autotune\n"
-"\n"
-"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
-"\n"
-" * Initrd: this option can be used either to load initial modules before\n"
-"the boot device is available, or to load a ramdisk image for an emergency\n"
-"boot situation.\n"
-"\n"
-" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
-"need to allocate a large ramdisk, this option can be used to specify a\n"
-"ramdisk larger than the default.\n"
-"\n"
-" * Read-write: normally the \"root\" partition is initially mounted as\n"
-"read-only, to allow a file system check before the system becomes ``live''.\n"
-"You can override the default with this option.\n"
-"\n"
-" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
-"problematic, you can select this option to boot in ``novideo'' mode, with\n"
-"native frame buffer support.\n"
-"\n"
-" * Default: selects this entry as being the default Linux selection,\n"
-"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
-"highlighted with a ``*'' if you press [Tab] to see the boot selections."
+"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
+"usbtable] [--dynamic=dev]"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"DrakX will first detect any IDE devices present in your computer. It will\n"
-"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
-"found, DrakX will automatically install the appropriate driver.\n"
-"\n"
-"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
-"your hard drives. If so, You'll have to specify your hardware by hand.\n"
-"\n"
-"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
-"want to configure options for it. You should allow DrakX to probe the\n"
-"hardware for the card-specific options which are needed to initialize the\n"
-"adapter. Most of the time, DrakX will get through this step without any\n"
-"issues.\n"
-"\n"
-"If DrakX is not able to probe for the options to automatically determine\n"
-"which parameters need to be passed to the hardware, you'll need to manually\n"
-"configure the driver."
-msgstr ""
-"DrakX จะพยายามหา PCI SCSI adapter(s)  ถ้า DrakX\n"
-"หาเจอ SCSI adapter และรู้ว่าควรใช้ไดร์เวอร์อะไร มันก็จะ\n"
-"ถูกติดตั้งโดยออโตเมติก\n"
-"\n"
-"\n"
-"ถ้าคุณมี SCSI adapter ISA adapter หรือ PCI SCSI adapter ที่ DrakX\n"
-"ไม่สามารถหาเจอ  คุณจะโดนถามว่ามี  SCSI adapter ในเครื่องของคุณ\n"
-"หรือไม่  ถ้าไม่มีกรุณากดที่ \"ไม่\"  แต่ถ้าคุณกดลงที่  \"ไช่\" คุณจะต้องเลือก\n"
-"ชนิดของ adapter ที่คุณมีอยู่\n"
-"\n"
-"\n"
-"ถ้าคุณเป็นคนเลือก Adapter เอง DrakX จะถามว่าคุณจะป้อนข้อมูล\n"
-"Option หรือไม่  ถึงตรงนี้คุณควรจะให้ DrakX ค้นหา option ที่เหมาะสม\n"
-"ซึ่งโดยทั่วไปมันจะสามารถหาได้เองอย่างถูกต้อง\n"
-"\n"
-"\n"
-"แต่ถ้าไม่สำเร็จคุณจำเป็นที่จะต้องให้ข้อมูล Option เอง  คุณควรหาข้อมูลเพิ่ม\n"
-"เติมได้จากคู่มือ (บทที่ 3 ตอน Collective informations on your hardware ) หรือ \n"
-"จาก Web Site ของผู้ผลิต หรือ จาก Microsoft Windows ถ้าคุณมีติดตั้ง"
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Now, it's time to select a printing system for your computer. Other OSs may\n"
-"offer you one, but Mandrake Linux offers two. Each of the printing systems\n"
-"is best for a particular type of configuration.\n"
-"\n"
-" * \"pdq\" -- which is an acronym for ``print, don't queue'', is the choice\n"
-"if you have a direct connection to your printer, you want to be able to\n"
-"panic out of printer jams, and you do not have networked printers. (\"pdq\n"
-"\" will handle only very simple network cases and is somewhat slow when\n"
-"used with networks.) It's recommended that you use \"pdq\" if this is your\n"
-"first experience with GNU/Linux.\n"
-"\n"
-" * \"CUPS\" - `` Common Unix Printing System'', is an excellent choice for\n"
-"printing to your local printer or to one halfway around the planet. It is\n"
-"simple to configure and can act as a server or a client for the ancient\n"
-"\"lpd \" printing system, so it compatible with older operating systems\n"
-"that may still need print services. While quite powerful, the basic setup\n"
-"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
-"sure to turn on the \"cups-lpd \" daemon. \"CUPS\" includes graphical\n"
-"front-ends for printing or choosing printer options and for managing the\n"
-"printer.\n"
-"\n"
-"If you make a choice now, and later find that you don't like your printing\n"
-"system you may change it by running PrinterDrake from the Mandrake Control\n"
-"Center and clicking the expert button."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
-"automated. DrakX will analyze the disk boot sector and act according to\n"
-"what it finds there:\n"
-"\n"
-" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
-"boot sector. This way you will be able to load either GNU/Linux or another\n"
-"OS.\n"
-"\n"
-" * if a grub or LILO boot sector is found, it will replace it with a new\n"
-"one.\n"
-"\n"
-"If it cannot make a determination, DrakX will ask you where to place the\n"
-"bootloader.\n"
-"\n"
-"\"Boot device\": in most cases, you will not change the default (\"First\n"
-"sector of drive (MBR)\"), but if you prefer, the bootloader can be\n"
-"installed on the second hard drive (\"/dev/hdb\"), or even on a floppy disk\n"
-"(\"On Floppy\")."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"After you have configured the general bootloader parameters, the list of\n"
-"boot options that will be available at boot time will be displayed.\n"
-"\n"
-"If there are other operating systems installed on your machine they will\n"
-"automatically be added to the boot menu. You can fine-tune the existing\n"
-"options by clicking \"Add\" to create a new entry; selecting an entry and\n"
-"clicking \"Modify\" or \"Remove\" to modify or remove it. \"OK\" validates\n"
-"your changes.\n"
-"\n"
-"You may also not want to give access to these other operating systems to\n"
-"anyone who goes to the console and reboots the machine. You can delete the\n"
-"corresponding entries for the operating systems to remove them from the\n"
-"bootloader menu, but you will need a boot disk in order to boot those other\n"
-"operating systems!"
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This dialog allows to finely tune your bootloader:\n"
-"\n"
-" * \"Bootloader to use\": there are three choices for your bootloader:\n"
-"\n"
-"    * \"GRUB\": if you prefer grub (text menu).\n"
-"\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
-"interface.\n"
-"\n"
-"    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
-"interface.\n"
-"\n"
-" * \"Boot device\": in most cases, you will not change the default\n"
-"(\"/dev/hda\"), but if you prefer, the bootloader can be installed on the\n"
-"second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
-"\n"
-" * \"Delay before booting the default image\": after a boot or a reboot of\n"
-"the computer, this is the delay given to the user at the console to select\n"
-"a boot entry other than the default.\n"
-"\n"
-"!! Beware that if you choose not to install a bootloader (by selecting\n"
-"\"Skip\"), you must ensure that you have a way to boot your Mandrake Linux\n"
-"system! Be sure you know what you do before changing any of the options. !!\n"
-"\n"
-"Clicking the \"Advanced\" button in this dialog will offer advanced options\n"
-"that are reserved for the expert user."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"This is the most crucial decision point for the security of your GNU/Linux\n"
-"system: you have to enter the \"root\" password. \"Root\" is the system\n"
-"administrator and is the only one authorized to make updates, add users,\n"
-"change the overall system configuration, and so on. In short, \"root\" can\n"
-"do everything! That is why you must choose a password that is difficult to\n"
-"guess - DrakX will tell you if the password that you chose too easy. As you\n"
-"can see, you are not forced to enter a password, but we strongly advise you\n"
-"against. GNU/Linux is as prone to operator error as any other operating\n"
-"system. Since \"root\" can overcome all limitations and unintentionally\n"
-"erase all data on partitions by carelessly accessing the partitions\n"
-"themselves, it is important that it be difficult to become \"root\".\n"
-"\n"
-"The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password -- it makes it too\n"
-"easy to compromise a system.\n"
-"\n"
-"One caveat -- do not make the password too long or complicated because you\n"
-"must be able to remember it!\n"
-"\n"
-"The password will not be displayed on screen as you type it in. To reduce\n"
-"the chance of a blind typing error you will need to enter the password\n"
-"twice. If you do happen to make the same typing error twice, this\n"
-"``incorrect'' password will have to be used the first time you connect.\n"
-"\n"
-"If you wish access to this computer to be controlled by an authentication\n"
-"server, click the \"Advanced\" button.\n"
-"\n"
-"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
-"services, select the appropriate one as \"authentication\". If you do not\n"
-"know which to use, ask your network administrator.\n"
-"\n"
-"If you happen to have problems with reminding passwords, you can choose to\n"
-"have \"No password\", if your computer won't be connected to the Internet,\n"
-"and if you trust anybody having access to it."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Please select the correct port. For example, the \"COM1\" port under\n"
-"Windows is named \"ttyS0\" under GNU/Linux."
-msgstr ""
+msgid "Tape"
+msgstr "ประเภท"
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Usually, DrakX has no problems detecting the number of buttons on your\n"
-"mouse. If it does, it assumes you have a two-button mouse and will\n"
-"configure it for third-button emulation. The third-button mouse button of a\n"
-"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
-"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
-"a PS/2, serial or USB interface.\n"
-"\n"
-"If for some reason you wish to specify a different type of mouse, select it\n"
-"from the provided list.\n"
-"\n"
-"If you choose a mouse other than the default, a test screen will be\n"
-"displayed. Use the buttons and wheel to verify that the settings are\n"
-"correct and that the mouse is working correctly. If the mouse is not\n"
-"working well, press the space bar or [Return] key to cancel the test and to\n"
-"go back to the list of choices.\n"
-"\n"
-"Wheel mice are occasionally not detected automatically, so you will need to\n"
-"select your mouse from a list. Be sure to select the one corresponding to\n"
-"the port that your mouse is attached to. After selecting a mouse and\n"
-"pressing the \"Next ->\" button, a mouse image is displayed on-screen.\n"
-"Scroll the mouse wheel to ensure that it is activated correctly. Once you\n"
-"see the on-screen scroll wheel moving as you scroll your mouse wheel, test\n"
-"the buttons and check that the mouse pointer moves on-screen as you move\n"
-"your mouse."
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Scanning network..."
+msgstr "ทดสอบ connection..."
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Your choice of preferred language will affect the language of the\n"
-"documentation, the installer and the system in general. Select first the\n"
-"region you are located in, and then the language you speak.\n"
-"\n"
-"Clicking on the \"Advanced\" button will allow you to select other\n"
-"languages to be installed on your workstation, thereby installing the\n"
-"language-specific files for system documentation and applications. For\n"
-"example, if you will host users from Spain on your machine, select English\n"
-"as the default language in the tree view and \"Espanol\" in the Advanced\n"
-"section.\n"
-"\n"
-"Note that you're not limited to choosing a single additional language. You\n"
-"may choose several ones, or even install them all by selecting the \"All\n"
-"languages\" box. Selecting support for a language means translations,\n"
-"fonts, spell checkers, etc. for that language will be installed.\n"
-"Additionally, the \"Use Unicode by default\" checkbox allows to force the\n"
-"system to use unicode (UTF-8). Note however that this is an experimental\n"
-"feature. If you select different languages requiring different encoding the\n"
-"unicode support will be installed anyway.\n"
-"\n"
-"To switch between the various languages installed on the system, you can\n"
-"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
-"language used by the entire system. Running the command as a regular user\n"
-"will only change the language settings for that particular user."
+"With this option you will be able to restore any version\n"
+" of your /etc directory."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Depending on the default language you chose in Section , DrakX will\n"
-"automatically select a particular type of keyboard configuration. However,\n"
-"you might not have a keyboard that corresponds exactly to your language:\n"
-"for example, if you are an English speaking Swiss person, you may have a\n"
-"Swiss keyboard. Or if you speak English but are located in Quebec, you may\n"
-"find yourself in the same situation where your native language and keyboard\n"
-"do not match. In either case, this installation step will allow you to\n"
-"select an appropriate keyboard from a list.\n"
-"\n"
-"Click on the \"More \" button to be presented with the complete list of\n"
-"supported keyboards.\n"
-"\n"
-"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
-"dialog will allow you to choose the key binding that will switch the\n"
-"keyboard between the Latin and non-Latin layouts."
+msgid "Malaysia"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"This step is activated only if an old GNU/Linux partition has been found on\n"
-"your machine.\n"
-"\n"
-"DrakX now needs to know if you want to perform a new install or an upgrade\n"
-"of an existing Mandrake Linux system:\n"
-"\n"
-" * \"Install\": For the most part, this completely wipes out the old\n"
-"system. If you wish to change how your hard drives are partitioned, or\n"
-"change the file system, you should use this option. However, depending on\n"
-"your partitioning scheme, you can prevent some of your existing data from\n"
-"being over- written.\n"
-"\n"
-" * \"Upgrade\": this installation class allows you to update the packages\n"
-"currently installed on your Mandrake Linux system. Your current\n"
-"partitioning scheme and user data is not altered. Most of other\n"
-"configuration steps remain available, similar to a standard installation.\n"
-"\n"
-"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
-"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
-"to Mandrake Linux version \"8.1\" is not recommended."
-msgstr ""
+msgid "Swiss (French layout)"
+msgstr "สวิส (เลย์เอ้าท์ตามฝรั่งเศษ)"
 
-#: ../../help.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid ""
-"\"Country\": check the current country selection. If you are not in this\n"
-"country, click on the \"Configure\" button and choose another one. If your\n"
-"country is not in the first list shown, click the \"More\" button to get\n"
-"the complete country list."
-msgstr ""
+msgid "mkraid failed (maybe raidtools are missing?)"
+msgstr "mkraid failed (maybe raidtools are missing?)"
 
-#: ../../help.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"More than one Microsoft partition has been detected on your hard drive.\n"
-"Please choose the one you want to resize in order to install your new\n"
-"Mandrake Linux operating system.\n"
-"\n"
-"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
-"\"Capacity\".\n"
-"\n"
-"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
-"\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc.\n"
-"\n"
-"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
-"disk or partition is called \"C:\")."
+msgid "Webcam"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"At this point, you need to choose which partition(s) will be used for the\n"
-"installation of your Mandrake Linux system. If partitions have already been\n"
-"defined, either from a previous installation of GNU/Linux or from another\n"
-"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
-"partitions must be defined.\n"
-"\n"
-"To create partitions, you must first select a hard drive. You can select\n"
-"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
-"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
-"\n"
-"To partition the selected hard drive, you can use these options:\n"
-"\n"
-" * \"Clear all\": this option deletes all partitions on the selected hard\n"
-"drive\n"
-"\n"
-" * \"Auto allocate\": this option enables you to automatically create ext3\n"
-"and swap partitions in free space of your hard drive\n"
-"\n"
-"\"More\": gives access to additional features:\n"
-"\n"
-" * \"Save partition table\": saves the partition table to a floppy. Useful\n"
-"for later partition-table recovery, if necessary. It is strongly\n"
-"recommended that you perform this step.\n"
-"\n"
-" * \"Restore partition table\": allows you to restore a previously saved\n"
-"partition table from a floppy disk.\n"
-"\n"
-" * \"Rescue partition table\": if your partition table is damaged, you can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"doesn't always work.\n"
-"\n"
-" * \"Reload partition table\": discards all changes and reloads the\n"
-"partition table that was originally on the hard drive.\n"
-"\n"
-" * \"Removable media automounting\": unchecking this option will force\n"
-"users to manually mount and unmount removable medias such as floppies and\n"
-"CD-ROMs.\n"
-"\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
-"your hard drive. This is recommended if you do not have a good\n"
-"understanding of partitioning.\n"
-"\n"
-" * \"Undo\": use this option to cancel your changes.\n"
-"\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on\n"
-"partitions (type, options, format) and gives more information about the\n"
-"hard drive.\n"
-"\n"
-" * \"Done\": when you are finished partitioning your hard drive, this will\n"
-"save your changes back to disk.\n"
-"\n"
-"When defining the size of a partition, you can finely set the partition\n"
-"size by using the Arrow keys of your keyboard.\n"
-"\n"
-"Note: you can reach any option using the keyboard. Navigate through the\n"
-"partitions using [Tab] and the [Up/Down] arrows.\n"
-"\n"
-"When a partition is selected, you can use:\n"
-"\n"
-" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
-"\n"
-" * Ctrl-d to delete a partition\n"
-"\n"
-" * Ctrl-m to set the mount point\n"
-"\n"
-"To get information about the different file system types available, please\n"
-"read the ext2FS chapter from the ``Reference Manual''.\n"
-"\n"
-"If you are installing on a PPC machine, you will want to create a small HFS\n"
-"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
-"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
-"may find it a useful place to store a spare kernel and ramdisk images for\n"
-"emergency boot situations."
+msgid "size of the (second level) cpu cache"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"At this point, DrakX will allow you to choose the security level desired\n"
-"for the machine. As a rule of thumb, the security level should be set\n"
-"higher if the machine will contain crucial data, or if it will be a machine\n"
-"directly exposed to the Internet. The trade-off of a higher security level\n"
-"is generally obtained at the expense of ease of use.\n"
-"\n"
-"If you do not know what to choose, keep the default option."
-msgstr ""
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Soundcard"
+msgstr "Sound card"
 
-#: ../../help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"At the time you are installing Mandrake Linux, it is likely that some\n"
-"packages have been updated since the initial release. Bugs may have been\n"
-"fixed, security issues resolved. To allow you to benefit from these\n"
-"updates, you are now able to download them from the Internet. Check \"Yes\"\n"
-"if you have a working Internet connection, or \"No\" if you prefer to\n"
-"install updated packages later.\n"
-"\n"
-"Choosing \"Yes\" will display a list of places from which updates can be\n"
-"retrieved. Choose the one nearest you. A package-selection tree will\n"
-"appear: review the selection, and press \"Install\" to retrieve and install\n"
-"the selected package(s), or \"Cancel\" to abort."
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\".\n"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Any partitions that have been newly defined must be formatted for use\n"
-"(formatting means creating a file system).\n"
-"\n"
-"At this time, you may wish to reformat some already existing partitions to\n"
-"erase any data they contain. If you wish to do that, please select those\n"
-"partitions as well.\n"
-"\n"
-"Please note that it is not necessary to reformat all pre-existing\n"
-"partitions. You must reformat the partitions containing the operating\n"
-"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
-"reformat partitions containing data that you wish to keep (typically\n"
-"\"/home\").\n"
-"\n"
-"Please be careful when selecting partitions. After formatting, all data on\n"
-"the selected partitions will be deleted and you will not be able to recover\n"
-"it.\n"
-"\n"
-"Click on \"Next ->\" when you are ready to format partitions.\n"
-"\n"
-"Click on \"<- Previous\" if you want to choose another partition for your\n"
-"new Mandrake Linux operating system installation.\n"
-"\n"
-"Click on \"Advanced\" if you wish to select partitions that will be checked\n"
-"for bad blocks on the disk."
-msgstr ""
+msgid "Level %s\n"
+msgstr "ระดับ %s\n"
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"There you are. Installation is now complete and your GNU/Linux system is\n"
-"ready to use. Just click \"Next ->\" to reboot the system. The first thing\n"
-"you should see after your computer has finished doing its hardware tests is\n"
-"the bootloader menu, giving you the choice of which operating system to\n"
-"start.\n"
-"\n"
-"The \"Advanced\" button shows two more buttons to:\n"
-"\n"
-" * \"generate auto-install floppy\": to create an installation floppy disk\n"
-"that will automatically perform a whole installation without the help of an\n"
-"operator, similar to the installation you just configured.\n"
-"\n"
-"   Note that two different options are available after clicking the button:\n"
-"\n"
-"    * \"Replay\". This is a partially automated installation. The\n"
-"partitioning step is the only interactive procedure.\n"
-"\n"
-"    * \"Automated\". Fully automated installation: the hard disk is\n"
-"completely rewritten, all data is lost.\n"
-"\n"
-"   This feature is very handy when installing a number of similar machines.\n"
-"See the Auto install section on our web site for more information.\n"
-"\n"
-" * \"Save packages selection\"(*): saves a list of the package selected in\n"
-"this installation. To use this selection with another installation, insert\n"
-"the floppy and start the installation. At the prompt, press the [F1] key\n"
-"and type >>linux defcfg=\"floppy\" <<.\n"
-"\n"
-"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
-"\"mformat a:\")"
+msgid "Luxembourg"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"At this point, you need to decide where you want to install the Mandrake\n"
-"Linux operating system on your hard drive. If your hard drive is empty or\n"
-"if an existing operating system is using all the available space you will\n"
-"have to partition the drive. Basically, partitioning a hard drive consists\n"
-"of logically dividing it to create the space needed to install your new\n"
-"Mandrake Linux system.\n"
-"\n"
-"Because the process of partitioning a hard drive is usually irreversible\n"
-"and can lead to lost data if there is an existing operating system already\n"
-"installed on the drive, partitioning can be intimidating and stressful if\n"
-"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
-"simplifies this process. Before continuing with this step, read through the\n"
-"rest of this section and above all, take your time.\n"
-"\n"
-"Depending on your hard drive configuration, several options are available:\n"
-"\n"
-" * \"Use free space\": this option will perform an automatic partitioning\n"
-"of your blank drive(s). If you use this option there will be no further\n"
-"prompts.\n"
-"\n"
-" * \"Use existing partition\": the wizard has detected one or more existing\n"
-"Linux partitions on your hard drive. If you want to use them, choose this\n"
-"option. You will then be asked to choose the mount points associated with\n"
-"each of the partitions. The legacy mount points are selected by default,\n"
-"and for the most part it's a good idea to keep them.\n"
-"\n"
-" * \"Use the free space on the Windows partition\": if Microsoft Windows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"Microsoft Windows partition and data (see ``Erase entire disk'' solution)\n"
-"or resize your Microsoft Windows FAT partition. Resizing can be performed\n"
-"without the loss of any data, provided you previously defragment the\n"
-"Windows partition and that it uses the FAT format. Backing up your data is\n"
-"strongly recommended.. Using this option is recommended if you want to use\n"
-"both Mandrake Linux and Microsoft Windows on the same computer.\n"
-"\n"
-"   Before choosing this option, please understand that after this\n"
-"procedure, the size of your Microsoft Windows partition will be smaller\n"
-"then when you started. You will have less free space under Microsoft\n"
-"Windows to store your data or to install new software.\n"
-"\n"
-" * \"Erase entire disk\": if you want to delete all data and all partitions\n"
-"present on your hard drive and replace them with your new Mandrake Linux\n"
-"system, choose this option. Be careful, because you will not be able to\n"
-"undo your choice after you confirm.\n"
 "\n"
-"   !! If you choose this option, all data on your disk will be deleted. !!\n"
+"                      DrakBackup Daemon Report\n"
 "\n"
-" * \"Remove Windows\": this will simply erase everything on the drive and\n"
-"begin fresh, partitioning everything from scratch. All data on your disk\n"
-"will be lost.\n"
 "\n"
-"   !! If you choose this option, all data on your disk will be lost. !!\n"
-"\n"
-" * \"Custom disk partitioning\": choose this option if you want to manually\n"
-"partition your hard drive. Be careful -- it is a powerful but dangerous\n"
-"choice and you can very easily lose all your data. That's why this option\n"
-"is really only recommended if you have done something like this before and\n"
-"have some experience. For more instructions on how to use the DiskDrake\n"
-"utility, refer to the ``Managing Your Partitions '' section in the\n"
-"``Starter Guide''."
-msgstr ""
-
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Finally, you will be asked whether you want to see the graphical interface\n"
-"at boot. Note this question will be asked even if you chose not to test the\n"
-"configuration. Obviously, you want to answer \"No\" if your machine is to\n"
-"act as a server, or if you were not successful in getting the display\n"
-"configured."
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Iran"
+msgstr "Iranian"
 
-#: ../../help.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor."
+msgid "Bus"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own."
+msgid "Iraq"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
-"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
-"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
-"\n"
-"You will be presented the list of different parameters to change to get an\n"
-"optimal graphical display: Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs.\n"
-"\n"
-"\n"
-"\n"
-"Monitor\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"monitor connected to your machine. If it is not the case, you can choose in\n"
-"this list the monitor you actually own.\n"
-"\n"
-"\n"
-"\n"
-"Resolution\n"
-"\n"
-"   You can choose here resolutions and color depth between those available\n"
-"for your hardware. Choose the one that best suit your needs (you will be\n"
-"able to change that after installation though). A sample of the chosen\n"
-"configuration is shown in the monitor.\n"
-"\n"
-"\n"
-"\n"
-"Test\n"
-"\n"
-"   the system will try to open a graphical screen at the desired\n"
-"resolution. If you can see the message during the test and answer \"Yes\",\n"
-"then DrakX will proceed to the next step. If you cannot see the message, it\n"
-"means that some part of the autodetected configuration was incorrect and\n"
-"the test will automatically end after 12 seconds, bringing you back to the\n"
-"menu. Change settings until you get a correct graphical display.\n"
-"\n"
-"\n"
-"\n"
-"Options\n"
-"\n"
-"   You can here choose whether you want to have your machine automatically\n"
-"switch to a graphical interface at boot. Obviously, you want to check\n"
-"\"No\" if your machine is to act as a server, or if you were not successful\n"
-"in getting the display configured."
-msgstr ""
+msgid "Potential LAN address conflict found in current config of %s!\n"
+msgstr "มีความขัดแย้งของ LAN address ซึ่งเจอในคอนฟิกปัจจุบันใน %s!\n"
 
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"Graphic Card\n"
-"\n"
-"   The installer can normally automatically detect and configure the\n"
-"graphic card installed on your machine. If it is not the case, you can\n"
-"choose in this list the card you actually own.\n"
-"\n"
-"   In the case that different servers are available for your card, with or\n"
-"without 3D acceleration, you are then proposed to choose the server that\n"
-"best suits your needs."
-msgstr ""
+msgid "Configuring..."
+msgstr "กำลังทำการคอนฟิก"
 
-#: ../../help.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
-"local time according to the time zone you selected. If the clock on your\n"
-"motherboard is set to local time, you may deactivate this by unselecting\n"
-"\"Hardware clock set to GMT \", which will let GNU/Linux know that the\n"
-"system clock and the hardware clock are in the same timezone. This is\n"
-"useful when the machine also hosts another operating system like Windows.\n"
-"\n"
-"The \"Automatic time synchronization \" option will automatically regulate\n"
-"the clock by connecting to a remote time server on the Internet. For this\n"
-"feature to work, you must have a working Internet connection. It is best to\n"
-"choose a time server located near you. This option actually installs a time\n"
-"server that can used by other machines on your local network."
-msgstr ""
+msgid "The setup has already been done, and it's currently enabled."
+msgstr "การปรับแต่งเรียบร้อยแล้วและตอนนี้ก็ได้ทำงานแล้ว"
 
-#: ../../help.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
 msgid ""
-"This dialog is used to choose which services you wish to start at boot\n"
-"time.\n"
-"\n"
-"DrakX will list all the services available on the current installation.\n"
-"Review each one carefully and uncheck those which are not always needed at\n"
-"boot time.\n"
-"\n"
-"A short explanatory text will be displayed about a service when it is\n"
-"selected. However, if you are not sure whether a service is useful or not,\n"
-"it is safer to leave the default behavior.\n"
-"\n"
-"!! At this stage, be very careful if you intend to use your machine as a\n"
-"server: you will probably not want to start any services that you do not\n"
-"need. Please remember that several services can be dangerous if they are\n"
-"enabled on a server. In general, select only the services you really need.\n"
-"!!"
+"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
+"detect the rights parameters.\n"
+"If your card is misdetected, you can force the right tuner and card types "
+"here. Just select your tv card parameters if needed."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\"Printer\": clicking on the \"Configure\" button will open the printer\n"
-"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
-"Guide'' for more information on how to setup a new printer. The interface\n"
-"presented there is similar to the one used during installation."
-msgstr ""
+msgid "Password (again)"
+msgstr "รหัสผ่าน (ใส่อีกครั้ง)"
 
-#: ../../help.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"You will now set up your Internet/network connection. If you wish to\n"
-"connect your computer to the Internet or to a local network, click \"Next\n"
-"->\". Mandrake Linux will attempt to autodetect network devices and modems.\n"
-"If this detection fails, uncheck the \"Use auto detection\" box. You may\n"
-"also choose not to configure the network, or to do it later, in which case\n"
-"clicking the \"Cancel\" button will take you to the next step.\n"
-"\n"
-"When configuring your network, the available connections options are:\n"
-"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
-"simple LAN connection (Ethernet).\n"
-"\n"
-"We will not detail each configuration option - just make sure that you have\n"
-"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
-"from your Internet Service Provider or system administrator.\n"
-"\n"
-"You can consult the ``Starter Guide'' chapter about Internet connections\n"
-"for details about the configuration, or simply wait until your system is\n"
-"installed and use the program described there to configure your connection."
+msgid "Search installed fonts"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"If you told the installer that you wanted to individually select packages,\n"
-"it will present a tree containing all packages classified by groups and\n"
-"subgroups. While browsing the tree, you can select entire groups,\n"
-"subgroups, or individual packages.\n"
-"\n"
-"Whenever you select a package on the tree, a description appears on the\n"
-"right to let you know the purpose of the package.\n"
-"\n"
-"!! If a server package has been selected, either because you specifically\n"
-"chose the individual package or because it was part of a group of packages,\n"
-"you will be asked to confirm that you really want those servers to be\n"
-"installed. By default Mandrake Linux will automatically start any installed\n"
-"services at boot time. Even if they are safe and have no known issues at\n"
-"the time the distribution was shipped, it is entirely possible that that\n"
-"security holes are discovered after this version of Mandrake Linux was\n"
-"finalized. If you do not know what a particular service is supposed to do\n"
-"or why it is being installed, then click \"No\". Clicking \"Yes \" will\n"
-"install the listed services and they will be started automatically by\n"
-"default during boot. !!\n"
-"\n"
-"The \"Automatic dependencies\" option is used to disable the warning dialog\n"
-"which appears whenever the installer automatically selects a package to\n"
-"resolve a dependency issue. Some packages have relationships between each\n"
-"other such that installation of a package requires that some other program\n"
-"is already installed. The installer can determine which packages are\n"
-"required to satisfy a dependency to successfully complete the installation.\n"
-"\n"
-"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
-"package list created during a previous installation. This is useful if you\n"
-"have a number of machines that you wish to configure identically. Clicking\n"
-"on this icon will ask you to insert a floppy disk previously created at the\n"
-"end of another installation. See the second tip of last step on how to\n"
-"create such a floppy."
+msgid "Venezuela"
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"It is now time to specify which programs you wish to install on your\n"
-"system. There are thousands of packages available for Mandrake Linux, and\n"
-"to make it simpler to manage the packages have been placed into groups of\n"
-"similar applications.\n"
-"\n"
-"Packages are sorted into groups corresponding to a particular use of your\n"
-"machine. Mandrake Linux has four predefined installations available. You\n"
-"can think of these installation classes as containers for various packages.\n"
-"You can mix and match applications from the various containers, so a\n"
-"``Workstation'' installation can still have applications from the\n"
-"``Development'' container installed.\n"
-"\n"
-" * \"Workstation\": if you plan to use your machine as a workstation,\n"
-"select one or more of the applications that are in the workstation\n"
-"container.\n"
-"\n"
-" * \"Development\": if plan on using your machine for programming, choose\n"
-"the appropriate packages from the container.\n"
-"\n"
-" * \"Server\": if your machine is intended to be a server, select which of\n"
-"the more common services you wish to install on your machine.\n"
-"\n"
-" * \"Graphical Environment\": this is where you will choose your preferred\n"
-"graphical environment. At least one must be selected if you want to have a\n"
-"graphical interface available.\n"
-"\n"
-"Moving the mouse cursor over a group name will display a short explanatory\n"
-"text about that group. If you unselect all groups when performing a regular\n"
-"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
-"different options for a minimal installation:\n"
-"\n"
-" * \"With X\": install the minimum number of packages possible to have a\n"
-"working graphical desktop.\n"
-"\n"
-" * \"With basic documentation\": installs the base system plus basic\n"
-"utilities and their documentation. This installation is suitable for\n"
-"setting up a server.\n"
-"\n"
-" * \"Truly minimal install\": will install the absolute minimum number of\n"
-"packages necessary to get a working Linux system. With this installation\n"
-"you will only have a command line interface. The total size of this\n"
-"installation is 65 megabytes.\n"
-"\n"
-"You can check the \"Individual package selection\" box, which is useful if\n"
-"you are familiar with the packages being offered or if you want to have\n"
-"total control over what will be installed.\n"
-"\n"
-"If you started the installation in \"Upgrade\" mode, you can unselect all\n"
-"groups to avoid installing any new package. This is useful for repairing or\n"
-"updating an existing system."
-msgstr ""
+msgid "IP address"
+msgstr "ค่า IP"
 
-#: ../../help.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid ""
-"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
-"knows if a selected package is located on another CD-ROM so it will eject\n"
-"the current CD and ask you to insert the correct CD as required."
-msgstr ""
+msgid "Choose the sizes"
+msgstr "เลือกขนาด"
 
-#: ../../help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Here are Listed the existing Linux partitions detected on your hard drive.\n"
-"You can keep the choices made by the wizard, since they are good for most\n"
-"common installations. If you make any changes, you must at least define a\n"
-"root partition (\"/\"). Do not choose too small a partition or you will not\n"
-"be able to install enough software. If you want to store your data on a\n"
-"separate partition, you will also need to create a \"/home\" partition\n"
-"(only possible if you have more than one Linux partition available).\n"
-"\n"
-"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
-"\n"
-"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
-"\"partition number\" (for example, \"hda1\").\n"
-"\n"
-"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
-"\"sd\" if it is a SCSI hard drive.\n"
-"\n"
-"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
-"hard drives:\n"
-"\n"
-" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
-"\n"
-" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
-"\n"
-" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"List of data corrupted:\n"
 "\n"
-"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
-"\"second lowest SCSI ID\", etc."
 msgstr ""
 
-#: ../../help.pm:1
+#: ../../network/modem.pm:1
 #, c-format
 msgid ""
-"GNU/Linux is a multi-user system, meaning each user can have their own\n"
-"preferences, their own files and so on. You can read the ``Starter Guide''\n"
-"to learn more about multi-user systems. But unlike \"root\", which is the\n"
-"system administrator, the users you add at this point will not be\n"
-"authorized to change anything except their own files and their own\n"
-"configuration, protecting the system from unintentional or malicious\n"
-"changes that impact the system as a whole. You will have to create at least\n"
-"one regular user for yourself -- this is the account which you should use\n"
-"for routine, day-to-day use. Although it is very easy to log in as \"root\"\n"
-"to do anything and everything, it may also be very dangerous! A mistake\n"
-"could mean that your system would not work any more. If you make a serious\n"
-"mistake as a regular user, the worst that will happen is that you will lose\n"
-"some information, but not affect the entire system.\n"
-"\n"
-"The first field asks you for a real name. Of course, this is not mandatory\n"
-"-- you can actually enter whatever you like. DrakX will use the first word\n"
-"you typed in and copy it to the \"User name\" field, which is the name this\n"
-"user will enter to log onto the system. If you like, you may override the\n"
-"default and change the username. The next step is to enter a password. From\n"
-"a security point of view, a non-privileged (regular) user password is not\n"
-"as crucial as the \"root\" password, but that is no reason to neglect it by\n"
-"making it blank or too simple: after all, your files could be the ones at\n"
-"risk.\n"
-"\n"
-"Once you click on \"Accept user\", you can add other users. Add a user for\n"
-"each one of your friends: your father or your sister, for example. Click\n"
-"\"Next ->\" when you have finished adding users.\n"
-"\n"
-"Clicking the \"Advanced\" button allows you to change the default \"shell\"\n"
-"for that user (bash by default).\n"
-"\n"
-"When you are finished adding all users, you will be asked to choose a user\n"
-"that can automatically log into the system when the computer boots up. If\n"
-"you are interested in that feature (and do not care much about local\n"
-"security), choose the desired user and window manager, then click \"Next\n"
-"->\". If you are not interested in this feature, uncheck the \"Do you want\n"
-"to use this feature?\" box."
+"Your modem isn't supported by the system.\n"
+"Take a look at http://www.linmodems.org"
 msgstr ""
 
-#: ../../help.pm:1
-#, c-format
-msgid ""
-"Before continuing, you should carefully read the terms of the license. It\n"
-"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
-"terms in it, check the \"Accept\" box. If not, simply turn off your\n"
-"computer."
-msgstr ""
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose another partition"
+msgstr "สร้างพาร์ติชั่นใหม่"
 
-#: ../../install2.pm:1
-#, c-format
-msgid "You must also format %s"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Current user"
+msgstr "ยอมรับผู้ใช้"
 
-#: ../../install2.pm:1
-#, c-format
-msgid ""
-"Can't access kernel modules corresponding to your kernel (file %s is "
-"missing), this generally means your boot floppy in not in sync with the "
-"Installation medium (please create a newer boot floppy)"
-msgstr ""
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username"
+msgstr "ชื่อผู้ใช้"
 
-#: ../../install_any.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"An error occurred - no valid devices were found on which to create new "
-"filesystems. Please check your hardware for the cause of this problem"
+msgid "Left \"Windows\" key"
 msgstr ""
-"เกิดข้อผิดพลาดขึ้น - ไม่พบอุปกรณ์ที่ถูกต้องเพื่อจะสร้างระบบไฟล์ใหม่ "
-"โปรดตรวจสอบฮาร์ดแวร์ของท่านเพื่อแก้ไขปัญหานี้"
 
-#: ../../install_any.pm:1 ../../partition_table.pm:1
-#, c-format
-msgid "Error reading file %s"
-msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "dhcpd Server Configuration"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../install_any.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
+"Used for directory:\n"
+" only owner of directory or file in this directory can delete it"
 msgstr ""
-"To use this saved packages selection, boot installation with ``linux "
-"defcfg=floppy''"
 
-#: ../../install_any.pm:1
-#, c-format
-msgid "This floppy is not FAT formatted"
-msgstr "่แผ่นฟล้อปปี้นี้ ไม่ใช่ แบบFAT"
-
-#: ../../install_any.pm:1
-#, c-format
-msgid "Insert a FAT formatted floppy in drive %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"
-
-#: ../../install_any.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Can't use broadcast with no NIS domain"
+msgid "Guyana"
 msgstr ""
 
-#: ../../install_any.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"The following packages will be removed to allow upgrading your system: %s\n"
-"\n"
-"\n"
-"Do you really want to remove these packages?\n"
+msgid " on Novell server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "No"
-msgstr "ไม่ต้อง"
+msgid "Remove a module"
+msgstr "ลบทิ้ง 1 module"
 
-#: ../../install_any.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../modules/interactive.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Yes"
-msgstr "ใช่"
+msgid "Password"
+msgstr "รหัสผ่าน"
 
-#: ../../install_any.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You have selected the following server(s): %s\n"
-"\n"
-"\n"
-"These servers are activated by default. They don't have any known security\n"
-"issues, but some new ones could be found. In that case, you must make sure\n"
-"to upgrade as soon as possible.\n"
-"\n"
+"Arguments: (max, inactive=-1)\n"
 "\n"
-"Do you really want to install these servers?\n"
-msgstr ""
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System configuration"
-msgstr "การคอนฟิก"
-
-#: ../../install_gtk.pm:1
-#, fuzzy, c-format
-msgid "System installation"
-msgstr "การติดตั้ง SILO"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing down the network"
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Bringing up the network"
-msgstr "ระบบเน็ตเวิร์กกำลังจะทำงาน"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Partitioning failed: %s"
-msgstr "การทำพาร์ติชั่นล้มเหลว: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "The DrakX Partitioning wizard found the following solutions:"
-msgstr "The DrakX Partitioning wizard เจอทางเลือกดังต่อไปนี้"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "I can't find any room for installing"
-msgstr "ผมไม่สามารถหาพื้นที่ว่างเพื่อทำการติดตั้ง"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You can now partition %s.\n"
-"When you are done, don't forget to save using `w'"
+"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
+"\\fP."
 msgstr ""
-"คุณสามารถพาร์ติชั่น %s เดี๋ยวนี้\n"
-"เมื่อเสร็จแล้วอย่าลืมบันทึกโดยใช้ `w'"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use fdisk"
-msgstr "ใช้ fdisk"
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Custom disk partitioning"
-msgstr "กำลังพาร์ติชั่น Custom disk"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "ALL existing partitions and their data will be lost on drive %s"
-msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นทั้งหมดจะสูญหายไป %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "You have more than one hard drive, which one do you install linux on?"
-msgstr "คุณมี harddisk มากกว่า  1 ตัว  คุณต้องการลง linux บน harddisk ตัวใหน"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Erase entire disk"
-msgstr "ลบ disk ทั้งหมด"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Remove Windows(TM)"
-msgstr "ลบ Windows(TM)"
-
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to resize (or not enough space left)"
-msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
+msgid "Advanced Configuration"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"To ensure data integrity after resizing the partition(s), \n"
-"filesystem checks will be run on your next boot into Windows(TM)"
+msgid "Scanning on your HP multi-function device"
 msgstr ""
 
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "FAT resizing failed: %s"
-msgstr "การกำหนดขนาด FAT เกิดการผิดพลาด: %s"
-
-#: ../../install_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Resizing Windows partition"
-msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"
+msgid "Root"
+msgstr "Root"
 
-#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Resizing"
-msgstr "ปรับขนาด"
+msgid "Choose an existing RAID to add to"
+msgstr "เลือก RAID เพื่อเพิ่มเข้าไป"
 
-#: ../../install_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "partition %s"
-msgstr "พาร์ติชั่น %s"
+msgid "Turkish (modern \"Q\" model)"
+msgstr "ตุรกี (โมเดลสมัยใหม่ \"Q\")"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Which size do you want to keep for Windows on"
-msgstr "คุณต้องการเก็บ Windows ไว้ในขนาดใหน"
-
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"WARNING!\n"
-"\n"
-"DrakX will now resize your Windows partition. Be careful:\n"
-"this operation is dangerous. If you have not already done\n"
-"so, you should first exit the installation, run scandisk\n"
-"under Windows (and optionally run defrag), then restart the\n"
-"installation. You should also backup your data.\n"
-"When sure, press Ok."
+msgid "Lilo message not found"
 msgstr ""
-"ระวัง!\n"
-"DrakX กำลังจะลดขนาดพาร์ติชั่นของ windows การทำงานนี้อันตลายมาก\n"
-"ถ้าคุณยังไม่เคยทำมาก่อนคุณควรออกจากการทำงานนี้และรัน Scandisk บน\n"
-"Windows (และ defrag) แล้วค่อยเริ่มทำงานนี้ใหม่  และคุณสมควรที่จะทำการ\n"
-"Backup ข้อมูลสำคัญขึ้นมาก่อน\n"
-"เมื่อคุณแน่ใจแล้ว กด OK"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Your Windows partition is too fragmented. Please reboot your computer under "
-"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
-"installation."
-msgstr "Windows partition ของคุณกระจัดกระจายมากเกินไป กรุณา Defrag ก่อน"
 
-#: ../../install_interactive.pm:1
-#, fuzzy, c-format
-msgid "Computing the size of the Windows partition"
-msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
-
-#: ../../install_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The FAT resizer is unable to handle your partition, \n"
-"the following error occured: %s"
+"Automatic regeneration of kernel header in /boot for\n"
+"/usr/include/linux/{autoconf,version}.h"
 msgstr ""
-"ตัวเปลี่ยนขนาดไม่สามารถทำงานกับ partition ของคุณ\n"
-"มีข้อผิดพลาดนี้เกิดขึ้น: %s"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to resize?"
-msgstr "พาร์ติชั่นไหนที่คุณต้องการเปลี่ยนขนาด"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Use the free space on the Windows partition"
-msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
+msgid "if needed"
+msgstr "ถ้าต้องการ"
 
-#: ../../install_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "There is no FAT partition to use as loopback (or not enough space left)"
-msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Swap partition size in MB: "
-msgstr "ขนาดพาร์ติชั่น Swapเป็น MB: "
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Root partition size in MB: "
-msgstr "ขนาดของพาร์ติชั่นรูท MB:"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Choose the sizes"
-msgstr "เลือกขนาด"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Which partition do you want to use for Linux4Win?"
-msgstr "พาร์ติชั่นใหนที่ท่านต้องการใช้กับ Linux4Win"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use the Windows partition for loopback"
-msgstr "ใช้ windows partion สำหรับการ Loopback"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "There is no existing partition to use"
-msgstr "ไม่มีพาร์ติชั่นที่มีอยู่ที่ใช้งานได้"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use existing partitions"
-msgstr "ใช้พาร์ติชั่นที่มีอยู่"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Not enough free space to allocate new partitions"
-msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid "Use free space"
-msgstr "ใช้พื้นที่ที่ว่าง"
+msgid "Restore Failed..."
+msgstr "เรียกคืนจากไฟล์"
 
-#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "You must have a FAT partition mounted in /boot/efi"
-msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You don't have a swap partition.\n"
-"\n"
-"Continue anyway?"
-msgstr ""
-"คุณไม่มีสวอปพาร์ติชั่นเลย\n"
-"\n"
-"ต้องการจะทำต่อหรือไม่?"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"You must have a root partition.\n"
-"For this, create a partition (or click on an existing one).\n"
-"Then choose action ``Mount point'' and set it to `/'"
-msgstr ""
-"คุณต้องมี root พาร์ติชั่น\n"
-"เพราะฉนั้นคุณต้องสร้าง พาร์ติชั่น (หรือกดเลือกอันที่มีอยู่)\n"
-"หลังจากนั้นเลือก ``Mount Point'' และจัดให้มันเป็น `/'"
-
-#: ../../install_interactive.pm:1
-#, c-format
-msgid ""
-"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
-"You can find some information about them at: %s"
-msgstr ""
-"hardware บางชนิดต้องการ driver พิเศษ\n"
-"คุณสามารถหาข้อมูลได้จาก: %s"
+msgid "/Autodetect _jazz drives"
+msgstr "ใช้ auto detection"
 
-#: ../../install_messages.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Congratulations, installation is complete.\n"
-"Remove the boot media and press return to reboot.\n"
-"\n"
-"\n"
-"For information on fixes which are available for this release of Mandrake "
-"Linux,\n"
-"consult the Errata available from:\n"
-"\n"
-"\n"
-"%s\n"
-"\n"
-"\n"
-"Information on configuring your system is available in the post\n"
-"install chapter of the Official Mandrake Linux User's Guide."
-msgstr ""
-"ขอแสดงความยินดี การติดตั้งเสร็จเรียบร้อย\n"
-"ให้เอาสื่อที่ใช้บูตออกจากไดรว์ (แผ่นฟล้อปปี้หรือซีดี) กดปุ่มรีเทิร์นเพื่อรีบูต\n"
-"\n"
-"\n"
-"สำหรับท่านที่ต้องการข้อมูลสำหรับการแก้ไขกับ ลีนุกซ์-แมนเดรก\n"
-"โปรดอ่าน Errata ได้ที่ \n"
-"\n"
-"\n"
-"%s\n"
+"Description:\n"
 "\n"
+"  Drakbackup is used to backup your system.\n"
+"  During the configuration you can select: \n"
+"\t- System files, \n"
+"\t- Users files, \n"
+"\t- Other files.\n"
+"\tor All your system ...  and Other (like Windows Partitions)\n"
 "\n"
-"ข้อมูลสำหรับการคอนฟิกระบบของคุณ สามารถหาได้จากช่วง\n"
-"บทหลังจากการติดตั้งของคู่มือแนะนำผู้ใช้งานลีนุกซ์-แมนเดรกฉบับเป็นทางการ"
-
-#: ../../install_messages.pm:1
-#, c-format
-msgid "http://www.mandrakelinux.com/en/91errata.php3"
-msgstr ""
-
-#: ../../install_messages.pm:1
-#, c-format
-msgid ""
+"  Drakbackup allows you to backup your system on:\n"
+"\t- Harddrive.\n"
+"\t- NFS.\n"
+"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
+"\t- FTP.\n"
+"\t- Rsync.\n"
+"\t- Webdav.\n"
+"\t- Tape.\n"
 "\n"
-"Warning\n"
+"  Drakbackup allows you to restore your system to\n"
+"  a user selected directory.\n"
 "\n"
-"Please read carefully the terms below. If you disagree with any\n"
-"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
-"to continue the installation without using these media.\n"
+"  Per default all backups will be stored on your\n"
+"  /var/lib/drakbackup directory\n"
 "\n"
+"  Configuration file:\n"
+"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
 "\n"
-"Some components contained in the next CD media are not governed\n"
-"by the GPL License or similar agreements. Each such component is then\n"
-"governed by the terms and conditions of its own specific license. \n"
-"Please read carefully and comply with such specific licenses before \n"
-"you use or redistribute the said components. \n"
-"Such licenses will in general prevent the transfer,  duplication \n"
-"(except for backup purposes), redistribution, reverse engineering, \n"
-"de-assembly, de-compilation or modification of the component. \n"
-"Any breach of agreement will immediately terminate your rights under \n"
-"the specific license. Unless the specific license terms grant you such\n"
-"rights, you usually cannot install the programs on more than one\n"
-"system, or adapt it to be used on a network. In doubt, please contact \n"
-"directly the distributor or editor of the component. \n"
-"Transfer to third parties or copying of such components including the \n"
-"documentation is usually forbidden.\n"
+"Restore Step:\n"
+"  \n"
+"  During the restore step, DrakBackup will remove \n"
+"  your original directory and verify that all \n"
+"  backup files are not corrupted. It is recommended \n"
+"  you do a last backup before restoring.\n"
 "\n"
 "\n"
-"All rights to the components of the next CD media belong to their \n"
-"respective authors and are protected by intellectual property and \n"
-"copyright laws applicable to software programs.\n"
 msgstr ""
 
 #: ../../install_messages.pm:1
@@ -2803,2270 +853,3350 @@ msgstr ""
 "Paris - France.\n"
 "For any question on this document, please contact MandrakeSoft S.A.  \n"
 
-#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
-#, c-format
-msgid "Entering step `%s'\n"
-msgstr "เข้าสู่ขั้นตอน `%s'\n"
-
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Help"
-msgstr "ความช่วยเหลือ"
+msgid ""
+"the progress bar x coordinate\n"
+"of its upper left corner"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "not configured"
-msgstr "คอนฟิกใหม่"
-
-#: ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
-#, c-format
-msgid "Configure"
-msgstr "การปรับแต่ง"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Go on anyway?"
-msgstr "ทำงานต่อหรือไม่?"
-
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "There was an error installing packages:"
-msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"
+msgid "Current interface configuration"
+msgstr "การคอนฟิก Internet"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "There was an error ordering packages:"
-msgstr "มีปัญหาการลำดับของแพ็คเก็จ:"
+msgid "LPD - Line Printer Daemon"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"Change your Cd-Rom!\n"
 "\n"
-"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
-"done.\n"
-"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
+"If you have an ISA card, the values on the next screen should be right.\n"
+"\n"
+"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
+"card.\n"
 msgstr ""
-"เปลี่ยน  CD-ROM\n"
 "\n"
-"กรุณาใส่ CD-ROM \"%s\" และกด OK\n"
-"ถ้่าคุณไม่มี กรุณากด ยกเลิก (cancel) เพื่อหลีกเลี่ยงการติดตั้งจาก CD-ROM นี้"
+"ถ้าคุณมี การ์ด ISA ตัวเลขในหน้าต่อไปควรจะถูกต้องอยู่แล้ว\n"
+"\n"
+"ถ้าคุณมีการ์ด PCMCIA คุณต้องรู้ irq และ io ของการ์ดของคุณ\n"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Refuse"
-msgstr "ไม่ยอมรับ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Do not print any test page"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakautoinst:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Accept"
-msgstr "ยอมรับ"
+msgid "Gurmukhi"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Installing package %s"
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+msgid "Force No APIC"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "%d packages"
-msgstr "แพ็คเก็จ %d ชุด"
+msgid "This password is too short (it must be at least %d characters long)"
+msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone.pm:1
 #, fuzzy, c-format
-msgid "No details"
-msgstr "รายละเอียด"
+msgid "[keyboard]"
+msgstr "คีย์บอร์ด"
 
-#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Details"
-msgstr "รายละเอียด"
+msgid "FTP proxy"
+msgstr "FTP proxy"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Please wait, preparing installation..."
-msgstr "กำลังเตรียมการติดตั้ง"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Install List"
+msgstr "ติดตั้งระบบ"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Time remaining "
-msgstr "เวลาที่เหลือ "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Change\n"
+"Restore Path"
+msgstr "เรียกคืนจากไฟล์"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Estimating"
-msgstr "การประเมิน"
+msgid "Show only for the selected day"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Installing"
-msgstr "กำลังติดตั้ง"
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be \"thin\"\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run most\n"
+"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are modified\n"
+"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
+"issues in using xdmcp,\n"
+"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
+"subnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future drakTermServ "
+"will help create these\n"
+"        \t\tfiles.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. In the future, "
+"drakTermServ can help create files\n"
+"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
+"keyboard on a per-client\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Choose the packages you want to install"
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง"
-
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Minimal install"
-msgstr "ออกจากการติดตั้ง"
+msgid "512 kB"
+msgstr "512 kB"
 
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Updating package selection"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+#: ../../standalone/net_monitor:1
+#, c-format
+msgid "Logs"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
-#, fuzzy, c-format
-msgid "Load/Save on floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "(Note: Parallel ports cannot be auto-detected)"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "<- Previous"
-msgstr "<- ก่อน"
+msgid "<control>N"
+msgstr "<control>N"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
-#: ../../standalone/drakbackup:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Install"
-msgstr "ติดตั้ง"
+msgid "What kind of card do you have?"
+msgstr "คุณมีการ์ดชนิดใด?"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Show automatically selected packages"
-msgstr ""
+msgid "<control>O"
+msgstr "<control>O"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid "You can't unselect this package. It must be upgraded"
-msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้  มันจำเป็นที่จะต้องถูก upgrade"
+msgid "Security"
+msgstr "ระบบความป้องกัน"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"This package must be upgraded.\n"
-"Are you sure you want to deselect it?"
+"You can also use the graphical interface \"xpdq\" for setting options and "
+"handling printing jobs.\n"
+"If you are using KDE as desktop environment you have a \"panic button\", an "
+"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
+"jobs immediately when you click it. This is for example useful for paper "
+"jams.\n"
 msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "You can't unselect this package. It is already installed"
-msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"
+msgid "<control>Q"
+msgstr "<control>Q"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "This is a mandatory package, it can't be unselected"
-msgstr "นี่คือแพกเกจที่ต้องติดตั้ง ไม่สามารถไม่เลือก"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Unknown"
+msgstr "Generic"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "You can't select/unselect this package"
-msgstr "คุณไม่สามารถเลือก/ไม่เลือกแพกเกจนี้"
+msgid "This server is already in the list, it cannot be added again.\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "The following packages are going to be removed"
-msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
+msgid "Network Configuration"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "The following packages are going to be installed"
-msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
+msgid "<control>S"
+msgstr "<control>S"
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
 msgid ""
-"You can't select this package as there is not enough space left to install it"
-msgstr "คุณไม่สามารถเลือก package นี้เนื่องจากคุณมีพื้นที่ไม่เพียงพอ"
+"Protocol for the rest of the world\n"
+"No D-Channel (leased lines)"
+msgstr ""
+"Rest of the world \n"
+"No D-Channel (leased lines)"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Importance: %s\n"
-msgstr "ความสำคัญ: %s\n"
+msgid "Option %s must be a number!"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
-#, c-format
-msgid "Size: %d KB\n"
-msgstr "ขนาด: %d KB\n"
+#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Notice"
+msgstr "NoVideo"
 
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Version: %s\n"
-msgstr "เวอร์ชั่น: %s\n"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Activate/Disable daily security check."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Name: %s\n"
-msgstr "ชื่อ: %s\n"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
+"allow and /etc/at.allow\n"
+"(see man at(1) and crontab(1))."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Bad package"
-msgstr "แพ็คเก็จชำรุด"
+msgid "You have not configured X. Are you sure you really want this?"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
-#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Other"
-msgstr "อื่นๆ"
+msgid ""
+"The configuration of the printer will work fully automatically. If your "
+"printer was not correctly detected or if you prefer a customized printer "
+"configuration, turn on \"Manual configuration\"."
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Total size: %d / %d MB"
-msgstr "ขนาดรวม: %d / %d MB "
+msgid "What type of partitioning?"
+msgstr "การทำ partitioning ชนิดใด?"
 
-#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../my_gtk.pm:1
-#: ../../ugtk2.pm:1 ../../interactive/newt.pm:1
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Next ->"
-msgstr "Next ->"
+msgid ""
+"file list sent by FTP: %s\n"
+" "
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Individual package selection"
-msgstr "Individual package selection"
+msgid "Interface"
+msgstr "Interface"
 
-#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Package Group Selection"
-msgstr "เลือกกลุ่มแพ็คเก็จ"
+msgid ""
+"Options Description:\n"
+"\n"
+" - Backup System Files:\n"
+"       \n"
+"\tThis option allows you to backup your /etc directory,\n"
+"\twhich contains all configuration files. Please be\n"
+"\tcareful during the restore step to not overwrite:\n"
+"\t\t/etc/passwd \n"
+"\t\t/etc/group \n"
+"\t\t/etc/fstab\n"
+"\n"
+" - Backup User Files: \n"
+"\n"
+"\tThis option allows you select all users that you want to \n"
+"\tbackup. To preserve disk space, it is recommended that\n"
+"\tyou do not include the web browser's cache.\n"
+"\n"
+" - Backup Other Files: \n"
+"\n"
+"\tThis option allows you to include additional data to save.\n"
+"\tIf you want to add individual files, select them from the\n"
+"\trighthand 'Files' list pane.  To add directories, enter the \n"
+"\tdirectory by clicking on it in the lefthand 'Folders' pane, \n"
+"\tand at that point click 'OK' without selecting any files.\n"
+" \n"
+" - Incremental Backups:\n"
+"\n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
+"\n"
+" - Differential Backups:\n"
+" \n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_gtk.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"Your system is low on resources. You may have some problem installing\n"
-"Mandrake Linux. If that occurs, you can try a text install instead. For "
-"this,\n"
-"press `F1' when booting on CDROM, then enter `text'."
+"Arguments: (arg, expr='*.*', dev='tty12')\n"
+"\n"
+"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
+"expression describing what to log (see syslog.conf(5) for more details) and\n"
+"dev the device to report the log."
 msgstr ""
-"เครื่องของคุณมีทรัพยากรค่อนข้างต่ำคุณอาจมีปัญหาติดตั้ง \n"
-"Mandrake Linux  ถ้าเป็นเช่นนั้น กรุณาทดลองติดตั้งแบบ text \n"
-"กรุณากด F1 ขณะ boot จาก cdrom แล้วพิมพ์ text"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Save packages selection"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "comma separated strings"
+msgstr "ฟอร์แมตพาร์ติชั่น"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Automated"
-msgstr "อัตโนมัติ"
+msgid "These are the machines from which the scanners should be used:"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Replay"
-msgstr "เรียกอีกครั้ง"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Messages"
+msgstr "ข้อความ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid ""
-"The auto install can be fully automated if wanted,\n"
-"in that case it will take over the hard drive!!\n"
-"(this is meant for installing on another box).\n"
-"\n"
-"You may prefer to replay the installation.\n"
+msgid "Unknown|CPH06X (bt878) [many vendors]"
 msgstr ""
-"การติดตั้งแบบออโตเมติกสามารถทำงานแบบเต็มรูปแบบหากต้องการ\n"
-"ในกรณีนั้นมันจะใช้ harddisk  ทั้งหมด\n"
-"(มันเหมาะกับการติดตั้งบนเครื่องอื่น)\n"
-"คุณอาจอยากกลับไปเริ่มต้นติดตั้งใหม่\n"
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Generate auto install floppy"
-msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "POP and IMAP Server"
+msgstr "เซิร์ฟเวอร์ NIS"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Reboot"
-msgstr "Root"
+msgid "Mexico"
+msgstr "Mouse"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Model stepping"
+msgstr "ฟอร์แมต"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Some steps are not completed.\n"
-"\n"
-"Do you really want to quit now?"
+msgid "Rwanda"
 msgstr ""
-"ขั้นตอนบางขั้นตอนไม่สมบูรณ์\n"
-"\n"
-"คุณต้องการออกจากการติดตั้งจริงๆหรือไม่?"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Creating auto install floppy..."
-msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
+msgid "Do you have any %s interfaces?"
+msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Insert a blank floppy in drive %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "
+msgid "Switzerland"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Brunei Darussalam"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Remote lpd Printer Options"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You may need to change your Open Firmware boot-device to\n"
-" enable the bootloader.  If you don't see the bootloader prompt at\n"
-" reboot, hold down Command-Option-O-F at reboot and enter:\n"
-" setenv boot-device %s,\\\\:tbxi\n"
-" Then type: shut-down\n"
-"At your next boot you should see the bootloader prompt."
+"GNU/Linux is a multi-user system, meaning each user may have their own\n"
+"preferences, their own files and so on. You can read the ``Starter Guide''\n"
+"to learn more about multi-user systems. But unlike \"root\", who is the\n"
+"system administrator, the users you add at this point will not be\n"
+"authorized to change anything except their own files and their own\n"
+"configurations, protecting the system from unintentional or malicious\n"
+"changes that impact on the system as a whole. You will have to create at\n"
+"least one regular user for yourself -- this is the account which you should\n"
+"use for routine, day-to-day use. Although it is very easy to log in as\n"
+"\"root\" to do anything and everything, it may also be very dangerous! A\n"
+"very simple mistake could mean that your system will not work any more. If\n"
+"you make a serious mistake as a regular user, the worst that will happen is\n"
+"that you will lose some information, but not affect the entire system.\n"
+"\n"
+"The first field asks you for a real name. Of course, this is not mandatory\n"
+"-- you can actually enter whatever you like. DrakX will use the first word\n"
+"you typed in this field and copy it to the \"%s\" field, which is the name\n"
+"this user will enter to log onto the system. If you like, you may override\n"
+"the default and change the username. The next step is to enter a password.\n"
+"From a security point of view, a non-privileged (regular) user password is\n"
+"not as crucial as the \"root\" password, but that is no reason to neglect\n"
+"it by making it blank or too simple: after all, your files could be the\n"
+"ones at risk.\n"
+"\n"
+"Once you click on \"%s\", you can add other users. Add a user for each one\n"
+"of your friends: your father or your sister, for example. Click \"%s\" when\n"
+"you have finished adding users.\n"
+"\n"
+"Clicking the \"%s\" button allows you to change the default \"shell\" for\n"
+"that user (bash by default).\n"
+"\n"
+"When you have finished adding users, you will be asked to choose a user\n"
+"that can automatically log into the system when the computer boots up. If\n"
+"you are interested in that feature (and do not care much about local\n"
+"security), choose the desired user and window manager, then click \"%s\".\n"
+"If you are not interested in this feature, uncheck the \"%s\" box."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Installation of bootloader failed. The following error occured:"
-msgstr "การติดตั้ง bootloader ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
+msgid "Configure Internet Access..."
+msgstr "ปรับแต่งการติดต่อเข้า internet"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Installing bootloader"
-msgstr "ติดตั้งบูตโหลดเดอร์"
+msgid "Norway"
+msgstr "นอร์เวย์"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Error installing aboot, \n"
-"try to force installation even if that destroys the first partition?"
-msgstr ""
-"การติดตั้ง aboot ล้มเหลว\n"
-"พยายามติดตั้งถึงแม้พาติชั่นแรกอาจจะเสียหาย?"
+msgid "Danish"
+msgstr "เดนมาร์ก"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Do you want to use aboot?"
-msgstr "คุณต้องการใช้ aboot หรือไม่"
+msgid ""
+"Automatically switch on numlock key locker under console\n"
+"and XFree at boot."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"You appear to have an OldWorld or Unknown\n"
-" machine, the yaboot bootloader will not work for you.\n"
-"The install will continue, but you'll\n"
-" need to use BootX or some other means to boot your machine"
+"Please enter the IP configuration for this machine.\n"
+"Each item should be entered as an IP address in dotted-decimal\n"
+"notation (for example, 1.2.3.4)."
 msgstr ""
+"โปรดกรอกข้อมูลการคอนฟิกค่า IP สำหรับเครื่องนี้\n"
+"ข้อมูลแต่ละอย่างสามารถใส่เข้าไปได้โดยใช้ค่า IP ในรูปแบบตัวเลขคั่นด้วยจุด\n"
+"(dotted-decimal notation) ตัวอย่างเช่น 1.2.3.4"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Preparing bootloader..."
-msgstr "กำลังเตรียมบูตโหลดเดอร์"
+msgid ""
+"The Mandrake Linux installation is distributed on several CD-ROMs. DrakX\n"
+"knows if a selected package is located on another CD-ROM so it will eject\n"
+"the current CD and ask you to insert the correct CD as required."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Domain Admin Password"
+msgid "Processors"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Domain Admin User Name"
-msgstr "ชื่อโดเมน"
+msgid "Bulgaria"
+msgstr "อังการี"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Windows Domain"
-msgstr "โดเมน NIS"
+msgid "No NIC selected!"
+msgstr "ไม่เชื่อมต่อ"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication Windows Domain"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+#: ../../lang.pm:1
+#, c-format
+msgid "Svalbard and Jan Mayen Islands"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"For this to work for a W2K PDC, you will probably need to have the admin "
-"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
-"add and reboot the server.\n"
-"You will also need the username/password of a Domain Admin to join the "
-"machine to the Windows(TM) domain.\n"
-"If networking is not yet enabled, Drakx will attempt to join the domain "
-"after the network setup step.\n"
-"Should this setup fail for some reason and domain authentication is not "
-"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
-"Domain, and Admin Username/Password, after system boot.\n"
-"The command 'wbinfo -t' will test whether your authentication secrets are "
-"good."
+"Problems occured during configuration.\n"
+"Test your connection via net_monitor or mcc. If your connection doesn't "
+"work, you might want to relaunch the configuration."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "NIS Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "partition %s is now known as %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup Other files..."
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "NIS Domain"
-msgstr "โดเมน NIS"
+msgid "SMB server IP"
+msgstr "ค่า IP ของ SMB เซิร์ฟเวอร์"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Authentication NIS"
-msgstr "การตรวจสอบสิทธิ์การใช้งานของ NIS"
+#: ../../lang.pm:1
+#, c-format
+msgid "Congo (Kinshasa)"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "NIS"
-msgstr "ใช้ NIS"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Partition table of drive %s is going to be written to disk!"
+msgstr "ตารางพาร์ติชั่นของไดรฟ์ %s จะถูกบันทึกลงไปในดิสก์"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "LDAP Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "Installing HPOJ package..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "LDAP Base dn"
+msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"LILO (or grub) on your system, or another operating system removes LILO, or "
+"LILO doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures. Would you like to create a bootdisk for your system?\n"
+"%s"
 msgstr ""
+"บูตดิสก์แบบแก้ไขได้ตามความต้องการของผู้ใช้ จะช่วยให้คุณสามารถบูตระบบลีนุกซ์\n"
+"ไม่ต้องเข้าสู่กระบวนการของบูตโหลดเดอร์ตามปกติ ซึ่งจะเป็นประโยชน์มากหากคุณ\n"
+"ไม่ได้ติดตั้ง LILO ลงในระบบของคุณ หรือหาก LILO ถูกลบออกไปเนื่องจากมีการ\n"
+"ระบบปฏิบัติการแบบอื่นๆ หรือ LILO ไม่ทำงานกับการคอนฟิกฮาร์ดแวร์ แผ่นบูตดิสก์\n"
+"จะสามารถใช้กับอิมเมจกู้คืนระบบของแมนเดร็ก ซึ่งจะช่วยให้คุณสามารถทำการกู้\n"
+"คืนระบบจากความผิดพลาดได้ด้วย คุณต้องการจะสร้างแผ่นบูตหรือไม่? \n"
+"%s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid ", USB printer \\#%s"
+msgstr ""
+
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Authentication LDAP"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+msgid "Latvian"
+msgstr "ตำแหน่ง"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LDAP"
+msgid "monthly"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Module name"
+msgstr "ชี่อ module"
+
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Local files"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Start at boot"
+msgstr "เริ่มทำงานตอน boot"
 
-#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Authentication"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+msgid "Use Incremental Backups"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "This password is too short (it must be at least %d characters long)"
-msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
+msgid "First sector of drive (MBR)"
+msgstr "เซ็กเตอร์แรกของไดรว์ (MBR)"
 
-#. -PO: keep this short or else the buttons will not fit in the window
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "No password"
-msgstr "ไม่มีรหัสผ่าน"
+msgid "Joystick"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set root password"
-msgstr "เซ็ตรหัสผ่านรูท"
+msgid "El Salvador"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "You have not configured X. Are you sure you really want this?"
+msgid "Use Unicode by default"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Services: %d activated for %d registered"
+msgid "the module of the GNU/Linux kernel that handles the device"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#, fuzzy, c-format
-msgid "Services"
-msgstr "อุปกรณ์"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Trying to rescue partition table"
+msgstr "กำลังพยายามกู้ตารางพาร์ติชั่นคืน"
 
-#: ../../install_steps_interactive.pm:1 ../../services.pm:1
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "System"
-msgstr "System mode"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Option %s must be an integer number!"
+msgstr ""
 
-#. -PO: example: lilo-graphic on /dev/hda1
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "%s on %s"
-msgstr "Port"
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid ""
+"Entries you'll have to fill:\n"
+"%s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Bootloader"
-msgstr "Bootloader ที่จะใช้"
+#: ../../standalone/livedrake:1
+#, c-format
+msgid "Unable to start live upgrade !!!\n"
+msgstr "ไม่สามารถเริ่ม live upgrade !!!\n"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Boot"
-msgstr "Root"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Name: "
+msgstr "ชื่อ: "
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "disabled"
-msgstr "disable"
+#: ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "16 million colors (24 bits)"
+msgstr "สิบหกล้านสี (24 บิต)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "activated"
-msgstr "แอ็คทีฟ"
+msgid "Allow all users"
+msgstr "เพิ่มผู้ใช้"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "Firewall"
+msgid "The official MandrakeSoft Store"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Security"
-msgstr "ระบบความป้องกัน"
+msgid "Resizing"
+msgstr "ปรับขนาด"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Cable connection"
+msgstr "cable connection"
+
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Security Level"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+msgid "User"
+msgstr "ชื่อผู้ใช้"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Network"
-msgstr "Network interface"
+msgid ""
+"I can't read the partition table of device %s, it's too corrupted for me :(\n"
+"I can try to go on, erasing over bad partitions (ALL DATA will be lost!).\n"
+"The other solution is to not allow DrakX to modify the partition table.\n"
+"(the error is %s)\n"
+"\n"
+"Do you agree to loose all the partitions?\n"
+msgstr ""
+"ผมไม่สามารถอ่านตารางพาร์ติชั่นได้ มันเสียหายมากเกินไป \n"
+"ผมสามารถพยายามลบข้อมูลข้อมูลในพาร์ติชั่นที่เสียหาย\n"
+"อีกทางเลือกคือไม่ให้ DrakX ทำการเปลี่ยนแปลงตาราง\n"
+"ข้อความผิดพลาดคือ %s\n"
+"\n"
+"คุณแน่ใจว่าจะยอมให้พาร์ติชั่นทั้งหมดถูกลบไป\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Do new backup before restore (only for incremental backups.)"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Network & Internet"
-msgstr "Network interface"
+msgid "Printer on parallel port \\#%s"
+msgstr "ชื่อของเครื่องพิมพ์"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Graphical interface"
-msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
+msgid "Name"
+msgstr "ชื่อ: "
+
+#: ../../raid.pm:1
+#, c-format
+msgid "mkraid failed"
+msgstr "mkraid failed"
 
 #: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Hardware"
+msgid "Button 3 Emulation"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files..."
+msgstr "บันทึกลงไฟล์"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "TV card"
-msgstr "TV card"
+msgid "Israeli (Phonetic)"
+msgstr "อิลราเอล (โฟเนติค)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "No sound card detected. Try \"harddrake\" after installation"
+msgid "access to rpm tools"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Run \"sndconfig\" after installation to configure your sound card"
+msgid "edit"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Do you have an ISA sound card?"
-msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
+msgid "You must choose/enter a printer/device!"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Sound card"
-msgstr "Sound card"
+msgid "Permission problem accessing CD."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Remote CUPS server"
-msgstr "Remote CUPS server"
+msgid "Phone number"
+msgstr "หมายเลขโทรศัพท์"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "No printer"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer"
-msgstr "เครื่องพิมพ์"
+#, fuzzy, c-format
+msgid "Printer name, description, location"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
 
-#: ../../install_steps_interactive.pm:1 ../../harddrake/data.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Mouse"
-msgstr "Mouse"
+msgid "USA (broadcast)"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid ""
+"Please choose the\n"
+"media for backup."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Timezone"
-msgstr "โซนเวลา"
+msgid "Use Xinerama extension"
+msgstr "Use Xinerama extension"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/keyboarddrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Keyboard"
-msgstr "คีย์บอร์ด"
+msgid "Loopback"
+msgstr "Loopback"
 
-#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Summary"
-msgstr "รวมความ"
+msgid ""
+"Unable to properly close mkbootdisk: \n"
+" %s \n"
+" %s"
+msgstr ""
+"ไม่สามารถปิด mkbootdisk ได้อย่างสมบูรณ์: \n"
+"%s \n"
+"%s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "NTP Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "West Europe"
+msgstr "ยุโรป"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Automatic time synchronization (using NTP)"
+msgid ""
+"[OPTIONS] [PROGRAM_NAME]\n"
+"\n"
+"OPTIONS:\n"
+"  --help            - print this help message.\n"
+"  --report          - program should be one of mandrake tools\n"
+"  --incident        - program should be one of mandrake tools"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Hardware clock set to GMT"
-msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"
+msgid "Harddrake2 version %s"
+msgstr "การตรวจหาฮาร์ดไดรว์"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Which is your timezone?"
-msgstr "คุณใช้ย่านเวลาใด? "
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Would you like to try again?"
-msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"
+msgid "Copying %s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Unable to contact mirror %s"
-msgstr "ไม่สามารถ forkได้.%s"
+msgid "Choose color"
+msgstr "เลือกจอภาพ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Contacting the mirror to get the list of available packages..."
-msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"
+msgid "Dominican Republic"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a mirror from which to get the packages"
-msgstr "เลือกมิลเรอร์ไซต์ที่จะใช้ในการดาวน์โหลดแพ็คเก็จ"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid ""
-"Contacting Mandrake Linux web site to get the list of available mirrors..."
-msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"
+msgid "Swaziland"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ""
-"You now have the opportunity to download updated packages. These packages\n"
-"have been updated after the distribution was released. They may\n"
-"contain security or bug fixes.\n"
-"\n"
-"To download these packages, you will need to have a working Internet \n"
-"connection.\n"
-"\n"
-"Do you want to install the updates ?"
+msgid "Set-UID"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please insert the Update Modules floppy in drive %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "
+msgid "Please check if you are using CDRW media"
+msgstr "โปรดเลือกพาร์ติชั่น"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Please insert the Boot floppy used in drive %s"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+msgid ""
+"Choose the hard drive you want to erase in order to install your new\n"
+"Mandrake Linux partition. Be careful, all data present on this partition\n"
+"will be lost and will not be recoverable!"
+msgstr ""
+"เลือก harddisk ที่ต้องการลบและลง Mandrake Linux\n"
+"ควรระวังเป็นอย่างมากดพราะว่าข้อมูลทุกอย่างจะถูกลบ\n"
+"และจะไม่สามารถกู้คืนได้"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Post-install configuration"
-msgstr "การคอนฟิกหลังการติดตั้ง"
+msgid " on parallel port \\#%s"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Installing package %s\n"
-"%d%%"
-msgstr ""
-"กำลังติดตั้งแพ็คเก็จ %s\n"
-"%d%%"
+msgid "Use the %c and %c keys for selecting which entry is highlighted."
+msgstr "ใช้ %c และ %c เพื่อเลือก."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Preparing installation"
-msgstr "กำลังเตรียมการติดตั้ง"
+msgid "Generic 2 Button Mouse"
+msgstr "Generic 2 Button Mouse"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lvm.pm:1
 #, c-format
-msgid "Cd-Rom labeled \"%s\""
-msgstr "Cd-Rom labeled \"%s\""
+msgid "Remove the logical volumes first\n"
+msgstr "ลบ logical volume ก่อน\n"
 
-#: ../../install_steps_interactive.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
+#, c-format
+msgid "The highlighted entry will be booted automatically in %d seconds."
+msgstr "OS ที่ถูกเลือกจะทำการ boot ใน %d วินาที"
+
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-"If you have all the CDs in the list below, click Ok.\n"
-"If you have none of those CDs, click Cancel.\n"
-"If only some CDs are missing, unselect them, then click Ok."
+"Can't write /etc/sysconfig/bootsplash\n"
+"File not found."
 msgstr ""
-"ถ้าคุณมี CD ทุกอย่าง กด OK\n"
-"ถ้าไม่มีเลย กด ยกเลิก (cancel)\n"
-"ถ้ามีแค่บางแผ่น เลือกเท่าที่มีแล้วกด OK"
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "All"
-msgstr "ทั้งหมด"
+msgid "Internet access"
+msgstr "การติดต่อ internet"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Truly minimal install (especially no urpmi)"
+msgid ""
+"y coordinate of text box\n"
+"in number of characters"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "With basic documentation (recommended!)"
+msgid ""
+"To get a list of the options available for the current printer click on the "
+"\"Print option list\" button."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "With X"
-msgstr ""
+msgid "Enabling servers..."
+msgstr "เริ่มทำงาน server"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You haven't selected any group of packages.\n"
-"Please choose the minimal installation you want:"
-msgstr ""
+msgid "Printing test page(s)..."
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Type of install"
-msgstr ""
+msgid "There is already a partition with mount point %s\n"
+msgstr "มีพาร์ติชั่นที่เป็นจุดเม้าท์ที่ %s เรียบร้อยแล้ว\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Selected size is larger than available space"
+msgid ""
+"At this point, you need to decide where you want to install the Mandrake\n"
+"Linux operating system on your hard drive. If your hard drive is empty or\n"
+"if an existing operating system is using all the available space you will\n"
+"have to partition the drive. Basically, partitioning a hard drive consists\n"
+"of logically dividing it to create the space needed to install your new\n"
+"Mandrake Linux system.\n"
+"\n"
+"Because the process of partitioning a hard drive is usually irreversible\n"
+"and can lead to lost data if there is an existing operating system already\n"
+"installed on the drive, partitioning can be intimidating and stressful if\n"
+"you are an inexperienced user. Fortunately, DrakX includes a wizard which\n"
+"simplifies this process. Before continuing with this step, read through the\n"
+"rest of this section and above all, take your time.\n"
+"\n"
+"Depending on your hard drive configuration, several options are available:\n"
+"\n"
+" * \"%s\": this option will perform an automatic partitioning of your blank\n"
+"drive(s). If you use this option there will be no further prompts.\n"
+"\n"
+" * \"%s\": the wizard has detected one or more existing Linux partitions on\n"
+"your hard drive. If you want to use them, choose this option. You will then\n"
+"be asked to choose the mount points associated with each of the partitions.\n"
+"The legacy mount points are selected by default, and for the most part it's\n"
+"a good idea to keep them.\n"
+"\n"
+" * \"%s\": if Microsoft Windows is installed on your hard drive and takes\n"
+"all the space available on it, you will have to create free space for\n"
+"Linux. To do so, you can delete your Microsoft Windows partition and data\n"
+"(see ``Erase entire disk'' solution) or resize your Microsoft Windows FAT\n"
+"partition. Resizing can be performed without the loss of any data, provided\n"
+"you have previously defragmented the Windows partition and that it uses the\n"
+"FAT format. Backing up your data is strongly recommended.. Using this\n"
+"option is recommended if you want to use both Mandrake Linux and Microsoft\n"
+"Windows on the same computer.\n"
+"\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"then when you started. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software.\n"
+"\n"
+" * \"%s\": if you want to delete all data and all partitions present on\n"
+"your hard drive and replace them with your new Mandrake Linux system,\n"
+"choose this option. Be careful, because you will not be able to undo your\n"
+"choice after you confirm.\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be deleted. !!\n"
+"\n"
+" * \"%s\": this will simply erase everything on the drive and begin fresh,\n"
+"partitioning everything from scratch. All data on your disk will be lost.\n"
+"\n"
+"   !! If you choose this option, all data on your disk will be lost. !!\n"
+"\n"
+" * \"%s\": choose this option if you want to manually partition your hard\n"
+"drive. Be careful -- it is a powerful but dangerous choice and you can very\n"
+"easily lose all your data. That's why this option is really only\n"
+"recommended if you have done something like this before and have some\n"
+"experience. For more instructions on how to use the DiskDrake utility,\n"
+"refer to the ``Managing Your Partitions '' section in the ``Starter\n"
+"Guide''."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Insert a floppy containing package selection"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+msgid "Ukraine"
+msgstr "ยูเครน"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Loading from floppy"
-msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+msgid "Application:"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Package selection"
-msgstr "เลือกกลุ่มแพ็คเก็จ"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "External ISDN modem"
+msgstr "External ISDN modem"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Save on floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
+msgid "if set to yes, report check result by mail."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Load from floppy"
-msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+#: ../../interactive/stdio.pm:1
+#, c-format
+msgid "Your choice? (default %s) "
+msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid ""
-"Please choose load or save package selection on floppy.\n"
-"The format is the same as auto_install generated floppies."
+msgid "Trouble shooting"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid " / Region"
+msgstr "ขนาดจอภาพ"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"Your system does not have enough space left for installation or upgrade (%d "
-"> %d)"
-msgstr "เครื่องของคุณไม่มีเนื้อที่เพียงพอในการติดตั้งหรือ upgrade (%d > %d)"
+"The classic bug sound tester is to run the following commands:\n"
+"\n"
+"\n"
+"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
+"by default\n"
+"\n"
+"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
+"currently uses\n"
+"\n"
+"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
+"loaded or not\n"
+"\n"
+"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
+"tell you if sound and alsa services're configured to be run on\n"
+"initlevel 3\n"
+"\n"
+"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"\n"
+"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Looking for available packages..."
-msgstr "กำลังหาแพ็คเก็จที่มีอยู่"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
+"Printing status:\n"
+"%s\n"
+"\n"
+msgstr ""
+"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
+"กรุณารอสักครู่\n"
+"สถานะการพิมพ์:\n"
+"%s\n"
+"\n"
+"มันทำงานถูกต้องใหมครับ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Finding packages to upgrade..."
-msgstr "กำลังหาแพ็คเก็จที่จะทำการอัพเกรด"
+msgid "daily"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Looking at packages already installed..."
-msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"
+msgid "and one unknown printer"
+msgstr "ไม่มีเครื่องพิมพ์"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Looking for available packages and rebuilding rpm database..."
-msgstr "กำลังหาแพ็คเก็จที่มีอยู่"
+msgid "Ireland"
+msgstr "ไอซ์แลนด์"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Not enough swap space to fulfill installation, please add some"
-msgstr "ไม่มีพื้นที่สวอปเพียงพอกับการติดตั้ง โปรดเพิ่มเนื้อที่"
+msgid "kernel version"
+msgstr "kernel version"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "         Restore Configuration       "
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+
+#: ../../Xconfig/test.pm:1
+#, fuzzy, c-format
+msgid "Is this the correct setting?"
+msgstr "ถูกต้องหรือไม่?"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
-"you can loose data)"
+"You will now set up your Internet/network connection. If you wish to\n"
+"connect your computer to the Internet or to a local network, click \"%s\".\n"
+"Mandrake Linux will attempt to autodetect network devices and modems. If\n"
+"this detection fails, uncheck the \"%s\" box. You may also choose not to\n"
+"configure the network, or to do it later, in which case clicking the \"%s\"\n"
+"button will take you to the next step.\n"
+"\n"
+"When configuring your network, the available connections options are:\n"
+"traditional modem, ISDN modem, ADSL connection, cable modem, and finally a\n"
+"simple LAN connection (Ethernet).\n"
+"\n"
+"We will not detail each configuration option - just make sure that you have\n"
+"all the parameters, such as IP address, default gateway, DNS servers, etc.\n"
+"from your Internet Service Provider or system administrator.\n"
+"\n"
+"You can consult the ``Starter Guide'' chapter about Internet connections\n"
+"for details about the configuration, or simply wait until your system is\n"
+"installed and use the program described there to configure your connection."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Check bad blocks?"
-msgstr "ตรวจสอบ bad blocks"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Wizard Configuration"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Choose the partitions you want to format"
-msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"
+msgid "Autoprobe"
+msgstr "ตรวจหาอัตโนมัติ"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "You need to reboot for the partition table modifications to take place"
-msgstr "คุณต้องทำการรีบูตระบบให้เครื่องรับทราบการเปลี่ยนแปลงตารางพาร์ติชั่น"
+msgid "Backup system files..."
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid ""
-"No free space for 1MB bootstrap! Install will continue, but to boot your "
-"system, you'll need to create the bootstrap partition in DiskDrake"
+msgid "Can't use broadcast with no NIS domain"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Choose the mount points"
-msgstr "เลือกจุดเม้าท์"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing printer \"%s\"..."
+msgstr "อ่าน CUPS drivers database..."
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Scanning partitions to find mount points"
-msgstr "Scanning partitions to find mount points"
+msgid "drakfloppy"
+msgstr "drakfloppy"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "No partition available"
-msgstr "ไม่มีพาร์ติชั่นเหลือ"
+msgid ""
+"Please indicate where the auto_install.cfg file is located.\n"
+"\n"
+"Leave it blank if you do not want to set up automatic installation mode.\n"
+"\n"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Configuring IDE"
-msgstr "คอนฟิก IDE"
+msgid "information level that can be obtained through the cpuid instruction"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "IDE"
-msgstr "IDE"
+msgid "Peru"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
-#, c-format
-msgid "Configuring PCMCIA cards..."
-msgstr "กำลังคอนฟิกการ์ด PCMCIA..."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid " on device: %s"
+msgstr "ดีไวซ์ของเม้าส์: %s\n"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "PCMCIA"
-msgstr "PCMCIA"
+msgid "Remove Windows(TM)"
+msgstr "ลบ Windows(TM)"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Starts the X Font Server (this is mandatory for XFree to run)."
+msgstr "เริ่มและหยุด X Font Server ตอน boot และ เลิก"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Button 3 Emulation"
+msgid ""
+"Most of these values were extracted\n"
+"from your running system.\n"
+"You can modify as needed."
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Button 2 Emulation"
+msgid "Select the font file or directory and click on 'Add'"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Buttons emulation"
+msgid "Madagascar"
 msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Please choose which serial port your mouse is connected to."
-msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
+msgid "Urpmi"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Mouse Port"
-msgstr "พอร์ตของเม้าส์"
+msgid "Cron not available yet as non-root"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please choose your type of mouse."
-msgstr "คุณมีเม้าส์ชนิดใด"
+msgid "System"
+msgstr "System mode"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, fuzzy, c-format
-msgid "Encryption key for %s"
-msgstr "รหัสผ่านไม่เหมือนกัน"
+msgid "Do you want to use this feature?"
+msgstr "คุณต้องการใช้ aboot หรือไม่"
 
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Upgrade %s"
-msgstr "Update"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Arabic"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Is this an install or an upgrade?"
-msgstr "นี่เป็นการติดตั้งหรือการอัพเกรด"
+msgid ""
+"\n"
+"- Options:\n"
+msgstr "/Options/ทดลอง"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Install/Upgrade"
-msgstr "ติดตั้ง/อัพเกรด "
+msgid "Password required"
+msgstr "รหัสผ่าน"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid "Here is the full list of keyboards available"
-msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
-
-#: ../../install_steps_interactive.pm:1
-#, fuzzy, c-format
-msgid "Please choose your keyboard layout."
-msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
+msgid "%d minutes"
+msgstr "%d นาที"
 
-#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
-#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Quit"
-msgstr "ออก"
+msgid "Graphics card: %s"
+msgstr "กราฟฟิคการ์ด: %s"
 
-#: ../../install_steps_interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "License agreement"
-msgstr "License agreement"
+msgid "WebDAV transfer failed!"
+msgstr ""
 
-#: ../../install_steps_interactive.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "An error occurred"
-msgstr "มีปัญหาเกิดขึ้น"
+msgid "XFree configuration"
+msgstr "การคอนฟิก XFree"
 
-#: ../../install_steps_newt.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
-msgstr "  <Tab>/<Alt-Tab> ระหว่างตัวเลือก | <Space> เลือก | <F12> หน้าถัดไป "
+msgid "Choose action"
+msgstr "เลือกกิจกรรม"
 
-#: ../../install_steps_newt.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mandrake Linux Installation %s"
-msgstr "การติดตั้งลีนุกซ์-แมนเดรก %s"
+msgid "French Polynesia"
+msgstr ""
 
-#: ../../install_steps.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "No floppy drive available"
-msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"
+msgid ""
+"Usually, DrakX has no problems detecting the number of buttons on your\n"
+"mouse. If it does, it assumes you have a two-button mouse and will\n"
+"configure it for third-button emulation. The third-button mouse button of a\n"
+"two-button mouse can be ``pressed'' by simultaneously clicking the left and\n"
+"right mouse buttons. DrakX will automatically know whether your mouse uses\n"
+"a PS/2, serial or USB interface.\n"
+"\n"
+"If for some reason you wish to specify a different type of mouse, select it\n"
+"from the list provided.\n"
+"\n"
+"If you choose a mouse other than the default, a test screen will be\n"
+"displayed. Use the buttons and wheel to verify that the settings are\n"
+"correct and that the mouse is working correctly. If the mouse is not\n"
+"working well, press the space bar or [Return] key to cancel the test and to\n"
+"go back to the list of choices.\n"
+"\n"
+"Wheel mice are occasionally not detected automatically, so you will need to\n"
+"select your mouse from a list. Be sure to select the one corresponding to\n"
+"the port that your mouse is attached to. After selecting a mouse and\n"
+"pressing the \"%s\" button, a mouse image is displayed on-screen. Scroll\n"
+"the mouse wheel to ensure that it is activated correctly. Once you see the\n"
+"on-screen scroll wheel moving as you scroll your mouse wheel, test the\n"
+"buttons and check that the mouse pointer moves on-screen as you move your\n"
+"mouse."
+msgstr ""
 
-#: ../../install_steps.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Welcome to %s"
-msgstr "ยินดีต้อนรับสู่ %s"
+msgid "Support the OKI 4w and compatible winprinters."
+msgstr ""
 
-#: ../../install_steps.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid ""
-"Some important packages didn't get installed properly.\n"
-"Either your cdrom drive or your cdrom is defective.\n"
-"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
-"\"\n"
+msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
 msgstr ""
-"แพ็กเกจสำคัญบางอย่างไม่ได้ถูกติดตั้งอย่างเรียบร้อย\n"
-"cdrom หรือ cdrom drive ของคุณอาจมีการเสียหาย\n"
-"กรุณาตรวจสอบ cdrom ในเครื่องคอมพิวเตอร์ที่มีการติดตั้งแล้ว\n"
-"โดยใช้ \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
 
-#: ../../install_steps.pm:1
+#. -PO: the first %s is the card type (scsi, network, sound,...)
+#. -PO: the second is the vendor+model name
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Duplicate mount point %s"
-msgstr "ทำซ้ำจุดเม้าท์ %s"
+msgid "Installing driver for %s card %s"
+msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"
 
-#: ../../install_steps.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"An error occurred, but I don't know how to handle it nicely.\n"
-"Continue at your own risk."
+"You have transferred your former default printer (\"%s\"), Should it be also "
+"the default printer under the new printing system %s?"
 msgstr ""
-"มีความผิดพลาดเกิดขึ้น แต่โปรแกรมไม่สามารถแก้ไขได้\n"
-"หากทำงานต่ออาจเกิดความเสียหายได้"
 
-#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
-#: ../../standalone/service_harddrake:1
-#, c-format
-msgid "Please wait"
-msgstr "โปรดรอสักครู่"
-
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
-#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
-#, c-format
-msgid "Ok"
-msgstr "ตกลง"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Enable Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
 
-#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
-#: ../../interactive/newt.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Finish"
-msgstr "เสร็จแล้ว"
+msgid "Ukrainian"
+msgstr "ยูเครน"
 
-#: ../../interactive.pm:1 ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Basic"
+msgid ""
+"The network access was not running and could not be started. Please check "
+"your configuration and your hardware. Then try to configure your remote "
+"printer again."
 msgstr ""
 
-#: ../../interactive.pm:1
-#, c-format
-msgid "Advanced"
-msgstr "Advanced"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Remove"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Please insert the Boot floppy used in drive %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
 
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Modify"
-msgstr "แก้ไข RAID"
-
-#: ../../interactive.pm:1 ../../interactive/gtk.pm:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
-#, c-format
-msgid "Add"
-msgstr "เพิ่ม"
+msgid "Local network(s)"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
 
-#: ../../interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Choose a file"
-msgstr "เลือกกิจกรรม"
+msgid "Remove Windows"
+msgstr "ลบ Windows(TM)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"Here you can choose the key or key combination that will \n"
-"allow switching between the different keyboard layouts\n"
-"(eg: latin and non latin)"
+"Your %s has been configured.\n"
+"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
+"applications menu."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Right \"Windows\" key"
+msgid "Firewire controllers"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Left \"Windows\" key"
+msgid ""
+"After you have configured the general bootloader parameters, the list of\n"
+"boot options that will be available at boot time will be displayed.\n"
+"\n"
+"If there are other operating systems installed on your machine they will\n"
+"automatically be added to the boot menu. You can fine-tune the existing\n"
+"options by clicking \"%s\" to create a new entry; selecting an entry and\n"
+"clicking \"%s\" or \"%s\" to modify or remove it. \"%s\" validates your\n"
+"changes.\n"
+"\n"
+"You may also not want to give access to these other operating systems to\n"
+"anyone who goes to the console and reboots the machine. You can delete the\n"
+"corresponding entries for the operating systems to remove them from the\n"
+"bootloader menu, but you will need a boot disk in order to boot those other\n"
+"operating systems!"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "\"Menu\" key"
-msgstr ""
+msgid "System mode"
+msgstr "System mode"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Alt and Shift keys simultaneously"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid ""
+"To print on a NetWare printer, you need to provide the NetWare print server "
+"name (Note! it may be different from its TCP/IP hostname!) as well as the "
+"print queue name for the printer you wish to access and any applicable user "
+"name and password."
 msgstr ""
+"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ในระบบเน็ตแวร์ คุณจะต้องป้อนข้อมูล\n"
+"ของชื่อพรินต์เซิร์ฟเวอร์ในระบบเน็ตแวร์ (ชื่อที่ป้อนเข้าไปอาจไม่ใช่ชื่อของ\n"
+"โฮสต์แบบ TCP/IP) และข้อมูลชื่อคิวของเครื่องพิมพ์ที่ต้องการใช้\n"
+"รวมทั้งชื่อผู้ใช้และรหัสผ่านด้วย"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Netmask:"
+msgstr "เน็ตมาสก์"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Ctrl and Alt keys simultaneously"
-msgstr ""
+msgid "Append"
+msgstr "Append"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "CapsLock key"
+msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Control and Shift keys simultaneously"
+msgid ""
+"When this option is turned on, on every startup of CUPS it is automatically "
+"made sure that\n"
+"\n"
+"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
+"\n"
+"- if /etc/cups/cupsd.conf is missing, it will be created\n"
+"\n"
+"- when printer information is broadcasted, it does not contain \"localhost\" "
+"as the server name.\n"
+"\n"
+"If some of these measures lead to problems for you, turn this option off, "
+"but then you have to take care of these points."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Both Shift keys simultaneously"
+msgid ""
+"OSS (Open Sound System) was the first sound API. It's an OS independant "
+"sound API (it's available on most unices systems) but it's a very basic and "
+"limited API.\n"
+"What's more, OSS drivers all reinvent the wheel.\n"
+"\n"
+"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
+"which\n"
+"supports quite a large range of ISA, USB and PCI cards.\n"
+"\n"
+"It also provides a much higher API than OSS.\n"
+"\n"
+"To use alsa, one can either use:\n"
+"- the old compatibility OSS api\n"
+"- the new ALSA api that provides many enhanced features but requires using "
+"the ALSA library.\n"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Right Alt key"
+msgid ""
+"The auto install can be fully automated if wanted,\n"
+"in that case it will take over the hard drive!!\n"
+"(this is meant for installing on another box).\n"
+"\n"
+"You may prefer to replay the installation.\n"
 msgstr ""
+"การติดตั้งแบบออโตเมติกสามารถทำงานแบบเต็มรูปแบบหากต้องการ\n"
+"ในกรณีนั้นมันจะใช้ harddisk  ทั้งหมด\n"
+"(มันเหมาะกับการติดตั้งบนเครื่องอื่น)\n"
+"คุณอาจอยากกลับไปเริ่มต้นติดตั้งใหม่\n"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Yugoslavian (latin)"
-msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"
+msgid "Network printer \"%s\", port %s"
+msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Vietnamese \"numeric row\" QWERTY"
-msgstr "Vietnamese \"numeric row\" QWERTY"
+msgid ""
+"Please choose what network adapter will be connected to your Local Area "
+"Network."
+msgstr "กรุณาเลือก network adapter ที่จะใช้กับระบบ LAN"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "US keyboard (international)"
-msgstr "คีย์บอร์ดอเมริกัน (นานาชาติ)"
+msgid "OK to restore the other files."
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "US keyboard"
-msgstr "อเมริกา"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Please choose your keyboard layout."
+msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "UK keyboard"
-msgstr "อังกฤษ"
+msgid "Printer Device URI"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Ukrainian"
-msgstr "ยูเครน"
+msgid "Not erasable media!"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Turkish (modern \"Q\" model)"
-msgstr "ตุรกี (โมเดลสมัยใหม่ \"Q\")"
+msgid "Terminal-based"
+msgstr "รูปแบบเทอร์มินอล"
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Turkish (traditional \"F\" model)"
-msgstr "ตุรกี (โมเดลแบบแผน \"F\")"
+msgid "Installing a printing system in the %s security level"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Tajik keyboard"
-msgstr "ไทย"
+msgid "The user name is too long"
+msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Thai keyboard"
-msgstr "ไทย"
-
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Tamil (Typewriter-layout)"
-msgstr "อาร์เมเนียน (พิมพ์ดีด)"
+msgid "Other OS (windows...)"
+msgstr "ระบบปฏิบัติการอื่นๆ (วินโดวส์...)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Tamil (ISCII-layout)"
+msgid "WebDAV remote site already in sync!"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Serbian (cyrillic)"
-msgstr "Azerbaidjani (cyrillic)"
+msgid "Reading printer database..."
+msgstr "อ่าน CUPS drivers database..."
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Slovakian (QWERTY)"
-msgstr "สโลวาเกีย (QWERTY)"
+msgid "Generate auto install floppy"
+msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Slovakian (QWERTZ)"
-msgstr "สโลวาเกีย (QWERTZ)"
+msgid ""
+"\t\t user name: %s\n"
+"\t\t on path: %s \n"
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Slovenian"
-msgstr "สโลวาเนีย"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Somalia"
+msgstr "โดเมน NIS"
 
-#: ../../keyboard.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Swedish"
-msgstr "สวีเดน"
+msgid "No open source driver"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Russian (Yawerty)"
-msgstr "รัสเซีย (Yawerty)"
+msgid ""
+"This is similar to the previous level, but the system is entirely closed and "
+"security features are at their maximum."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Russian"
-msgstr "รัสเซีย"
+msgid "Nicaragua"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Romanian (qwerty)"
-msgstr "รัสเซีย (Yawerty)"
+msgid "New Caledonia"
+msgstr "Macedonian"
 
-#: ../../keyboard.pm:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "Romanian (qwertz)"
-msgstr "รัสเซีย (Yawerty)"
+msgid "European protocol (EDSS1)"
+msgstr "ยุโรป (EDS11)"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Canadian (Quebec)"
-msgstr "คานาดา (ควิเบค)"
+msgid "Video mode"
+msgstr "โหมดของการแสดงผล"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Please enter your email address below "
+msgstr "โปรดลองอีกครั้ง"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Oman"
+msgstr "โดเมน NIS"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Network Monitoring"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Portuguese"
-msgstr "โปรตุเกส"
+msgid "SunOS"
+msgstr "SunOS"
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "New size in MB: "
+msgstr "ขนาดเป็น MB: "
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Polish (qwertz layout)"
-msgstr "Polish (qwertz layout)"
+msgid "Partition table type: %s\n"
+msgstr "ชนิดตารางพาร์ติชั่น: %s\n"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication Windows Domain"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Polish (qwerty layout)"
-msgstr "Polish (qwerty layout)"
+msgid "US keyboard"
+msgstr "อเมริกา"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Norwegian"
-msgstr "นอร์เวย์"
+msgid "Buttons emulation"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Dutch"
-msgstr "ฮอลแลนด์"
+msgid ", network printer \"%s\", port %s"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Maltese (US)"
+msgid ""
+"\n"
+"Drakbackup activities via tape:\n"
+"\n"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Maltese (UK)"
+msgid ""
+"\n"
+" FTP connection problem: It was not possible to send your backup files by "
+"FTP.\n"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Mongolian (cyrillic)"
-msgstr "Azerbaidjani (cyrillic)"
+msgid "Sending Speed:"
+msgstr "บันทึกลงไฟล์"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Myanmar (Burmese)"
+msgid "Halt bug"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Macedonian"
-msgstr "Macedonian"
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Mail alert configuration"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Malayalam"
+msgid "Tokelau"
 msgstr ""
 
 #: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Latvian"
-msgstr "ตำแหน่ง"
+msgid "Bosnian"
+msgstr "Estonian"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \"phonetic\" QWERTY"
-msgstr "ลิธัวเนีย \"โฟเนติค\" QWERTY"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Release: "
+msgstr "โปรดรอสักครู่"
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Lithuanian \"number row\" QWERTY"
-msgstr "ลิธัวเนีย \"แถวตัวเลข\" QWERTY"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection speed"
+msgstr "ชนิดการเชื่อมต่อ"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lithuanian AZERTY (new)"
-msgstr "Lithuanian AZERTY (new)"
+msgid ""
+"Please enter your CD Writer device name\n"
+" ex: 0,1,0"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Lithuanian AZERTY (old)"
-msgstr "Lithuanian AZERTY (old)"
+msgid "Namibia"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Laotian"
-msgstr "ตำแหน่ง"
+msgid "Database Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Latin American"
-msgstr "ละตินอเมริกา"
+msgid "special capacities of the driver (burning ability and or DVD support)"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../raid.pm:1
 #, c-format
-msgid "Korean keyboard"
-msgstr "Korean keyboard"
+msgid "Can't add a partition to _formatted_ RAID md%d"
+msgstr "ไม่สามารถเพิ่มพาร์ติชั่นเป็น _formatted_ RAID md%d"
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Japanese 106 keys"
-msgstr "Japanese 106 keys"
+msgid ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
+msgstr ""
+"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security options..."
+msgstr "กำลังเตรียมการติดตั้ง"
+
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Inuktitut"
+msgid "Unknown|CPH05X (bt878) [many vendors]"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Italian"
-msgstr "อิตาลี"
+msgid "Launch the graphical environment when your system starts"
+msgstr "รัน X-Window เมื่อเริ่มทำงาน"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Icelandic"
-msgstr "ไอซ์แลนด์"
+msgid "hourly"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Iranian"
-msgstr "Iranian"
+msgid "          Successfuly Restored on %s       "
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Israeli (Phonetic)"
-msgstr "อิลราเอล (โฟเนติค)"
+msgid "Making printer port available for CUPS..."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Israeli"
-msgstr "อิสราเอล"
+msgid "Antigua and Barbuda"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Croatian"
-msgstr "Croatian"
+msgid ""
+"!!! Indicates the password in the system database is different than\n"
+" the one in the Terminal Server database.\n"
+"Delete/re-add the user to the Terminal Server to enable login."
+msgstr ""
 
 #: ../../keyboard.pm:1
 #, c-format
-msgid "Hungarian"
-msgstr "อังการี"
+msgid "Spanish"
+msgstr "สเปน"
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Start"
+msgstr "สถานะ:"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Gurmukhi"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Activate/Disable ethernet cards promiscuity check."
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Configuring applications..."
+msgstr "การคอนฟิกเครื่องพิมพ์"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Gujarati"
-msgstr ""
+msgid "Normal modem connection"
+msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "File Selection"
+msgstr "เลือกกลุ่มแพ็คเก็จ"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Greek"
-msgstr "กรีก"
+msgid ""
+"Which ISDN configuration do you prefer?\n"
+"\n"
+"* The Old configuration uses isdn4net. It contains powerful\n"
+"  tools, but is tricky to configure, and not standard.\n"
+"\n"
+"* The New configuration is easier to understand, more\n"
+"  standard, but with less tools.\n"
+"\n"
+"We recommand the light configuration.\n"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../help.pm:1 ../../printer/cups.pm:1 ../../printer/data.pm:1
 #, c-format
-msgid "Georgian (\"Latin\" layout)"
-msgstr "จอร์เจีย (เลย์เอ้าท์แบบละติน)"
+msgid "CUPS"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Georgian (\"Russian\" layout)"
-msgstr "จอร์เจีย (เลย์เอ้าท์แบบรัสเซีย)"
+msgid "Run config tool"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "French"
-msgstr "ฝรั่งเศษ"
+msgid "Bootloader installation"
+msgstr "การติดตั้ง Bootloader"
 
-#: ../../keyboard.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Finnish"
-msgstr "ฟินแลนด์"
+msgid "Root partition size in MB: "
+msgstr "ขนาดของพาร์ติชั่นรูท MB:"
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Spanish"
-msgstr "สเปน"
+msgid "This is a mandatory package, it can't be unselected"
+msgstr "นี่คือแพกเกจที่ต้องติดตั้ง ไม่สามารถไม่เลือก"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Estonian"
-msgstr "Estonian"
+msgid "Etherboot ISO image is %s"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Dvorak (Swedish)"
-msgstr "Dvorak (US)"
+msgid ""
+"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
+"names to IP addresses."
+msgstr ""
+"named (BIND) คือ Domain Name Server (DNS) ทำหน้าที่แปลงชื่อ\n"
+"host names เป็น IP addresses."
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Dvorak (Norwegian)"
-msgstr "Dvorak (Norwegian)"
+msgid "Disconnect..."
+msgstr "ยกเลิกติดต่อ..."
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Dvorak (US)"
-msgstr "Dvorak (US)"
+msgid "Saint Lucia"
+msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Danish"
-msgstr "เดนมาร์ก"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Report"
+msgstr "Port"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Devanagari"
+msgid "Palau"
 msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "German (no dead keys)"
-msgstr "German (no dead keys)"
+msgid "level"
+msgstr "ระดับ"
 
-#: ../../keyboard.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, c-format
-msgid "German"
-msgstr "เยอรมัน"
+msgid ""
+"All incidents will be followed up by a single qualified MandrakeSoft "
+"technical expert."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Czech (QWERTY)"
-msgstr "เชคโกสโลวาเกีย (QWERTY)"
+msgid "Package Group Selection"
+msgstr "เลือกกลุ่มแพ็คเก็จ"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Czech (QWERTZ)"
-msgstr "เชคโกสโลวาเกีย (QWERTZ)"
+msgid "Restore Via Network Protocol: %s"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Swiss (French layout)"
-msgstr "สวิส (เลย์เอ้าท์ตามฝรั่งเศษ)"
+msgid "You can configure each parameter of the module here."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Swiss (German layout)"
-msgstr "สวิส (เลย์เอ้าท์ตามเยอรมัน)"
+msgid "Choose the resolution and the color depth"
+msgstr "เลือกขนาดจอภาพและความละเอียดสี"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/mousedrake:1
 #, c-format
-msgid "Belarusian"
-msgstr "Belarusian"
+msgid "Emulate third button?"
+msgstr "ต้องการจำลองเม้าส์ปุ่มที่สามด้วยหรือไม่?"
 
-#: ../../keyboard.pm:1
-#, fuzzy, c-format
-msgid "Bosnian"
-msgstr "Estonian"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"You can't create a new partition\n"
+"(since you reached the maximal number of primary partitions).\n"
+"First remove a primary partition and create an extended partition."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Brazilian (ABNT-2)"
-msgstr "บราซิล"
+msgid "Mount"
+msgstr "เม้าท์"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Bulgarian (BDS)"
-msgstr "บัลกาเรีย"
+msgid "Creating auto install floppy"
+msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
 
-#: ../../keyboard.pm:1
+#: ../../steps.pm:1
 #, fuzzy, c-format
-msgid "Bulgarian (phonetic)"
-msgstr "อาร์เมเนียน (โฟเนติค)"
+msgid "Install updates"
+msgstr "ติดตั้งระบบ"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/draksplash:1
+#, c-format
+msgid "text box height"
+msgstr ""
+
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Bengali"
-msgstr "enable"
+msgid "State"
+msgstr "สถานะ:"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Belgian"
-msgstr "เบลเยี่ยม"
+msgid "Be sure a media is present for the device %s"
+msgstr "ตรวจให้แน่ใจว่ามีอุปกรณ์อยู่ใน%s"
 
-#: ../../keyboard.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Azerbaidjani (latin)"
-msgstr "Azerbaidjani (latin)"
+msgid "Enable multiple profiles"
+msgstr "Enable multiple profiles"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Arabic"
+msgid ""
+"These options can backup and restore all files in your /etc directory.\n"
 msgstr ""
 
-#: ../../keyboard.pm:1
-#, c-format
-msgid "Armenian (phonetic)"
-msgstr "อาร์เมเนียน (โฟเนติค)"
-
-#: ../../keyboard.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Armenian (typewriter)"
-msgstr "อาร์เมเนียน (พิมพ์ดีด)"
+msgid "Local printer"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Armenian (old)"
-msgstr "อาร์เมเนียน (เก่า)"
+msgid "Files Restored..."
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Albanian"
-msgstr "Iranian"
+msgid "Package selection"
+msgstr "เลือกกลุ่มแพ็คเก็จ"
 
-#: ../../keyboard.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Polish"
-msgstr "โปแลนด์"
+msgid "Mauritania"
+msgstr ""
 
-#: ../../keyboard.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Dvorak"
-msgstr "Dvorak"
+msgid ""
+"I can keep your current configuration and assume you already set up a DHCP "
+"server; in that case please verify I correctly read the Network that you use "
+"for your local network; I will not reconfigure it and I will not touch your "
+"DHCP server configuration.\n"
+"\n"
+"The default DNS entry is the Caching Nameserver configured on the firewall. "
+"You can replace that with your ISP DNS IP, for example.\n"
+"\t\t      \n"
+"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
+"for you.\n"
+"\n"
+msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Zimbabwe"
-msgstr "อาจจะ"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"No local printer found! To manually install a printer enter a device name/"
+"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
+"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
+"printer: /dev/usb/lp1, ...)."
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Zambia"
+msgid "All primary partitions are used"
+msgstr "พาร์ติชั่นแบบ primary ถูกใช้ทั้งหมดแล้ว"
+
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid ""
+"After this is done, we recommend that you restart your X environment to "
+"avoid any hostname-related problems."
 msgstr ""
+"เมื่อทุกอย่างเสร็จสิ้น ผมแนะนำให้ท่านเริ่มทำงาน X windows ใหม่\n"
+"เพื่อป้องกันปัญหา hostname ที่อาจเกิดขึ้นได้"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../services.pm:1
 #, c-format
-msgid "South Africa"
+msgid "Automatic detection and configuration of hardware at boot."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Serbia"
-msgstr "พอร์ตอนุกรม"
+msgid "Installation Server Configuration"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mayotte"
-msgstr ""
+msgid "Configuring IDE"
+msgstr "คอนฟิก IDE"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Network functionality not configured"
+msgstr "ไม่มีการคอนฟิกจอภาพ"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Configure module"
+msgstr "คอนฟิกเม้าส์"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Yemen"
+msgid "Cocos (Keeling) Islands"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnecting from the Internet "
+msgstr "ต่อเข้า Internet "
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Samoa"
-msgstr ""
+msgid "You'll need to reboot before the modification can take place"
+msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Wallis and Futuna"
-msgstr ""
+msgid "Provider phone number"
+msgstr "หมายเลขโทรศัพท์"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Host %s"
+msgstr "ชื่อโฮสต์:"
 
 #: ../../lang.pm:1
-#, c-format
-msgid "Vanuatu"
-msgstr ""
+#, fuzzy, c-format
+msgid "Armenia"
+msgstr "อาร์เมเนียน (เก่า)"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Fiji"
+msgstr "ฟินแลนด์"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Vietnam"
+msgid ""
+"Arguments: (length, ndigits=0, nupper=0)\n"
+"\n"
+"Set the password minimum length and minimum number of digit and minimum "
+"number of capitalized letters."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Virgin Islands (U.S.)"
+msgid "Second floppy drive"
+msgstr "Floppy Drive เครื่องที่สอง"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "About Harddrake"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Virgin Islands (British)"
+msgid "Drive capacity"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Venezuela"
+msgid ""
+"Insert a floppy in drive\n"
+"All data on this floppy will be lost"
 msgstr ""
+"กรุณาใส่แผ่นฟล้อปปี้ในไดรว์\n"
+"ข้อมูลทั้งหมดบนแผ่นฟล้อปปี้จะถูกลบ"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Saint Vincent and the Grenadines"
+msgid "Size: %s"
+msgstr "ขนาด: %s"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Control and Shift keys simultaneously"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Vatican"
-msgstr "ตำแหน่ง"
+msgid "secondary"
+msgstr "%d วินาที"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "View Backup Configuration."
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Uzbekistan"
+msgid "if set to yes, report check result to syslog."
 msgstr ""
 
-#: ../../lang.pm:1
+#. -PO: keep this short or else the buttons will not fit in the window
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Uruguay"
-msgstr ""
+msgid "No password"
+msgstr "ไม่มีรหัสผ่าน"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Nigeria"
+msgstr "พอร์ตอนุกรม"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "United States Minor Outlying Islands"
-msgstr ""
+msgid "There is no existing partition to use"
+msgstr "ไม่มีพาร์ติชั่นที่มีอยู่ที่ใช้งานได้"
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Uganda"
-msgstr "Update"
+msgid ""
+"The following scanners\n"
+"\n"
+"%s\n"
+"are available on your system.\n"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Ukraine"
-msgstr "ยูเครน"
+msgid ""
+"To print to a TCP or socket printer, you need to provide the host name or IP "
+"of the printer and optionally the port number (default is 9100). On HP "
+"JetDirect servers the port number is usually 9100, on other servers it can "
+"vary. See the manual of your hardware."
+msgstr ""
+"To print to a socket printer, you need to provide the\n"
+"hostname of the printer and optionally the port number."
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hard drive information"
+msgstr "การตรวจหาฮาร์ดไดรว์"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Tanzania"
-msgstr ""
+msgid "Russian"
+msgstr "รัสเซีย"
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Taiwan"
-msgstr "ตำแหน่ง"
+msgid "Jordan"
+msgstr "Iranian"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Hide files"
+msgstr "mkraid failed"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Auto-detect printers connected to this machine"
+msgstr "เครื่องพิมพ์แบบรีโมท"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Tuvalu"
+msgid ""
+"XawTV isn't installed!\n"
+"\n"
+"\n"
+"If you do have a TV card but DrakX has neither detected it (no bttv nor "
+"saa7134\n"
+"module in \"/etc/modules\") nor installed xawtv, please send the\n"
+"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
+"with subject \"undetected TV card\".\n"
+"\n"
+"\n"
+"You can install it by typing \"urpmi xawtv\" as root, in a console."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Trinidad and Tobago"
-msgstr ""
+msgid "Sorry, no floppy drive available"
+msgstr "ขออภัย ไม่มีฟล้อปปี้ไดรว์เลย"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Turkey"
+msgid "Bolivia"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Tonga"
+msgid ""
+"Set up your Windows server to make the printer available under the IPP "
+"protocol and set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Tunisia"
-msgstr ""
+msgid "Bad package"
+msgstr "แพ็คเก็จชำรุด"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Turkmenistan"
+msgid ""
+"Transform your computer into a powerful Linux server: Web server, mail, "
+"firewall, router, file and print server (etc.) are just a few clicks away!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "DrakSec Basic Options"
+msgstr "/Options/ทดลอง"
+
+#: ../../standalone/draksound:1
 #, c-format
-msgid "East Timor"
+msgid ""
+"\n"
+"\n"
+"\n"
+"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
+"program.  Just type \"sndconfig\" in a console."
 msgstr ""
 
 #: ../../lang.pm:1
-#, c-format
-msgid "Tokelau"
-msgstr ""
+#, fuzzy, c-format
+msgid "Romania"
+msgstr "โดเมน NIS"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "choose device"
+msgstr "อุปกรณ์บูต"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Canada"
+msgstr "ปฎิทิน"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Tajikistan"
-msgstr ""
+msgid "Remove from LVM"
+msgstr "ลบออกจาก LVM"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Thailand"
-msgstr ""
+msgid "Timezone"
+msgstr "โซนเวลา"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Togo"
-msgstr ""
+msgid "German"
+msgstr "เยอรมัน"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "French Southern Territories"
-msgstr ""
+msgid "Next ->"
+msgstr "Next ->"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Chad"
+msgid ""
+"Turning on this allows to print plain text files in japanese language. Only "
+"use this function if you really want to print text in japanese, if it is "
+"activated you cannot print accentuated characters in latin fonts any more "
+"and you will not be able to adjust the margins, the character size, etc. "
+"This setting only affects printers defined on this machine. If you want to "
+"print japanese text on a printer set up on a remote machine, you have to "
+"activate this function on that remote machine."
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Turks and Caicos Islands"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"\n"
+"Chances are, this partition is\n"
+"a Driver partition. You should\n"
+"probably leave it alone.\n"
 msgstr ""
+"\n"
+"มีความเป็นไปได้ที่พาร์ติชั่นนี้\n"
+"เป็นพาร์ติชั่นของไดรเวอร์ คุณควรที่จะ\n"
+"ปล่อยมันทิ้งไว้แบบนี้\n"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Swaziland"
+msgid "Guinea-Bissau"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Syria"
+msgid "Horizontal refresh rate"
+msgstr "อัตราการรีเฟรชตามแนวนอน"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
 msgstr ""
+"Can't unset mount point as this partition is used for loop back.\n"
+"Remove the loopback first"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "El Salvador"
+msgid ""
+"The network configuration done during the installation cannot be started "
+"now. Please check whether the network is accessable after booting your "
+"system and correct the configuration using the Mandrake Control Center, "
+"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
+"printer, also using the Mandrake Control Center, section \"Hardware\"/"
+"\"Printer\""
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Sao Tome and Principe"
+msgid "USB controllers"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/various.pm:1
 #, fuzzy, c-format
-msgid "Suriname"
+msgid "What norm is your TV using?"
+msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Type:"
+msgstr "ประเภท: "
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Share name"
 msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "enable"
+msgstr "enable"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Somalia"
-msgstr "โดเมน NIS"
+msgid ""
+"Contacting Mandrake Linux web site to get the list of available mirrors..."
+msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Senegal"
-msgstr "enable"
+msgid ""
+"A problem occured while restarting the network: \n"
+"\n"
+"%s"
+msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Remove the loopback file?"
+msgstr "ฟอร์แมต loopback file %s"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "San Marino"
+msgid "Selected size is larger than available space"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sierra Leone"
+msgid "NCP server name missing!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Slovakia"
-msgstr "สโลวาเนีย"
+msgid "Please choose your country."
+msgstr "คุณมีเม้าส์ชนิดใด"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Svalbard and Jan Mayen Islands"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Hard Disk Backup files..."
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Slovenia"
-msgstr "สโลวาเนีย"
+msgid "Laotian"
+msgstr "ตำแหน่ง"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Saint Helena"
+msgid "Samoa"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Singapore"
+msgid ""
+"The rstat protocol allows users on a network to retrieve\n"
+"performance metrics for any machine on that network."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Re-generating list of configured scanners ..."
+msgstr ""
+
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Sudan"
-msgstr "SunOS"
+msgid "Scanner"
+msgstr "เลือกกราฟฟิคการ์ด"
 
-#: ../../lang.pm:1
+#: ../../Xconfig/test.pm:1
 #, fuzzy, c-format
-msgid "Seychelles"
-msgstr "เชลล์ที่ใช้"
+msgid "Warning: testing this graphic card may freeze your computer"
+msgstr "ระวัง การทดสอบการ์ดแสดงผลอาจทำให้คอมพิวเตอร์หยุดการทำงาน"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Solomon Islands"
-msgstr ""
+msgid ""
+"The user name must contain only lower cased letters, numbers, `-' and `_'"
+msgstr "ชื่อผู้ใช้จะสามารถมีได้เฉพาะตัวอักษรตัวเล็ก ตัวเลข '-' และ '_'"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Menudrake"
+msgstr "แบบผู้เชี่ยวชาญ (Expert)"
+
+#: ../../security/level.pm:1
 #, c-format
-msgid "Saudi Arabia"
-msgstr ""
+msgid "Welcome To Crackers"
+msgstr "Welcome To Crackers"
 
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Rwanda"
+msgid "Module options:"
+msgstr "อ๊อปชั่นของโมดูล:"
+
+#: ../../share/advertising/11-mnf.pl:1
+#, c-format
+msgid "Secure your networks with the Multi Network Firewall"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Russia"
-msgstr "รัสเซีย"
+msgid "Go on without configuring the network"
+msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Romania"
-msgstr "โดเมน NIS"
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Abort"
+msgstr "เลิก"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "No password prompt on %s at port %s"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Reunion"
-msgstr "ขนาดจอภาพ"
+msgid "Please check if you want to use the non-rewinding device."
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Qatar"
-msgstr "สถานะ:"
+msgid "Usage of remote scanners"
+msgstr "ใช้พื้นที่ที่ว่าง"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Palau"
+msgid "\t-CDROM.\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Paraguay"
+msgid ""
+"Your Windows partition is too fragmented. Please reboot your computer under "
+"Windows, run the ``defrag'' utility, then restart the Mandrake Linux "
+"installation."
+msgstr "Windows partition ของคุณกระจัดกระจายมากเกินไป กรุณา Defrag ก่อน"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Dvorak (Norwegian)"
+msgstr "Dvorak (Norwegian)"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Hard Disk Backup Progress..."
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Portugal"
-msgstr "Port"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "Unable to fork: %s"
+msgstr "ไม่สามารถ forkได้.%s"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Palestine"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Type: "
+msgstr "ประเภท: "
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Puerto Rico"
-msgstr "Protocol"
+msgid "<-- Edit Client"
+msgstr "DHCP Client"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Pitcairn"
-msgstr "เครื่องพิมพ์"
+msgid "no fonts found"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Saint Pierre and Miquelon"
-msgstr ""
+msgid "Mouse"
+msgstr "Mouse"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Poland"
-msgstr "ไอซ์แลนด์"
+#: ../../bootloader.pm:1
+#, c-format
+msgid "not enough room in /boot"
+msgstr "ไม่มีที่พอใน /boot"
 
-#: ../../lang.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Pakistan"
+msgid "Choosing an arbitratry driver"
 msgstr ""
 
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Host name"
+msgstr "ชื่อโฮสต์:"
+
 #: ../../lang.pm:1
 #, c-format
-msgid "Philippines"
+msgid "Liechtenstein"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Papua New Guinea"
+msgid "the color of the progress bar"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "French Polynesia"
+msgid "Suppress Fonts Files"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Peru"
+msgid "Add to RAID"
+msgstr "เพิ่มให้ RAID"
+
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"You can add additional entries in yaboot for other operating systems,\n"
+"alternate kernels, or for an emergency boot image.\n"
+"\n"
+"For other OSs, the entry consists only of a label and the \"root\"\n"
+"partition.\n"
+"\n"
+"For Linux, there are a few possible options:\n"
+"\n"
+" * Label: this is the name you will have to type at the yaboot prompt to\n"
+"select this boot option.\n"
+"\n"
+" * Image: this is the name of the kernel to boot. Typically, vmlinux or a\n"
+"variation of vmlinux with an extension.\n"
+"\n"
+" * Root: the \"root\" device or ``/'' for your Linux installation.\n"
+"\n"
+" * Append: on Apple hardware, the kernel append option is often used to\n"
+"assist in initializing video hardware, or to enable keyboard mouse button\n"
+"emulation for the missing 2nd and 3rd mouse buttons on a stock Apple mouse.\n"
+"The following are some examples:\n"
+"\n"
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
+"hda=autotune\n"
+"\n"
+"         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
+"\n"
+" * Initrd: this option can be used either to load initial modules before\n"
+"the boot device is available, or to load a ramdisk image for an emergency\n"
+"boot situation.\n"
+"\n"
+" * Initrd-size: the default ramdisk size is generally 4096 Kbytes. If you\n"
+"need to allocate a large ramdisk, this option can be used to specify a\n"
+"ramdisk larger than the default.\n"
+"\n"
+" * Read-write: normally the \"root\" partition is initially mounted as\n"
+"read-only, to allow a file system check before the system becomes ``live''.\n"
+"You can override the default with this option.\n"
+"\n"
+" * NoVideo: should the Apple video hardware prove to be exceptionally\n"
+"problematic, you can select this option to boot in ``novideo'' mode, with\n"
+"native frame buffer support.\n"
+"\n"
+" * Default: selects this entry as being the default Linux selection,\n"
+"selectable by pressing ENTER at the yaboot prompt. This entry will also be\n"
+"highlighted with a ``*'' if you press [Tab] to see the boot selections."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Panama"
+msgid ""
+"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Oman"
-msgstr "โดเมน NIS"
+msgid "No floppy drive available!"
+msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "New Zealand"
+msgid ""
+"To know about the options available for the current printer read either the "
+"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"\n"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Niue"
-msgstr "NoVideo"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Continue anyway?"
+msgstr "ทำงานต่อหรือไม่?"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Nauru"
+msgid ""
+"If your printer is not listed, choose a compatible (see printer manual) or a "
+"similar one."
 msgstr ""
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../harddrake/data.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer"
+msgstr "เครื่องพิมพ์"
+
 #: ../../lang.pm:1
 #, c-format
-msgid "Nepal"
+msgid "Saudi Arabia"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Nicaragua"
+msgid "Internet"
+msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
+
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Some devices were added:\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
+msgstr "ข้อมูลทางกายภาพ: %s ไซลินเดอร์, %s หัวอ่าน, %s เซ้กเตอร์\n"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Nigeria"
-msgstr "พอร์ตอนุกรม"
+msgid "Printing on the printer \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Norfolk Island"
+msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Niger"
-msgstr "สูง"
+msgid "Restore From Tape"
+msgstr "กู้ตารางพาร์ติชั่น"
 
-#: ../../lang.pm:1
+#: ../../network/netconnect.pm:1
+#, c-format
+msgid "Choose the profile to configure"
+msgstr "เลือก profile ที่จะปรับแต่ง"
+
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid ""
+"\n"
+"\n"
+"Enter a Zeroconf host name without any dot if you don't\n"
+"want to use the default host name."
+msgstr ""
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "New Caledonia"
-msgstr "Macedonian"
+msgid "Backup Now from configuration file"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Namibia"
+msgid "Mount points should contain only alphanumerical characters"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Restarting printing system..."
+msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "Mozambique"
+msgid ""
+"Arguments: (name)\n"
+"\n"
+"Add the name as an exception to the handling of password aging by msec."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Malaysia"
+msgid "See hardware info"
+msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"
+
+#: ../../any.pm:1
+#, c-format
+msgid "First sector of boot partition"
+msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Printer manufacturer, model"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Mexico"
-msgstr "Mouse"
+#: ../../printer/data.pm:1
+#, c-format
+msgid "PDQ - Print, Don't Queue"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Malawi"
+msgid ""
+"[OPTIONS]...\n"
+"Mandrake Terminal Server Configurator\n"
+"--enable         : enable MTS\n"
+"--disable        : disable MTS\n"
+"--start          : start MTS\n"
+"--stop           : stop MTS\n"
+"--adduser        : add an existing system user to MTS (requires username)\n"
+"--deluser        : delete an existing system user from MTS (requires "
+"username)\n"
+"--addclient      : add a client machine to MTS (requires MAC address, IP, "
+"nbi image name)\n"
+"--delclient      : delete a client machine from MTS (requires MAC address, "
+"IP, nbi image name)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Maldives"
+msgid "Subnet Mask:"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Mauritius"
+msgid "LiLo and Bootsplash themes installation successfull"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Malta"
+msgid ""
+"The two critical parameters are the vertical refresh rate, which is the "
+"rate\n"
+"at which the whole screen is refreshed, and most importantly the horizontal\n"
+"sync rate, which is the rate at which scanlines are displayed.\n"
+"\n"
+"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
+"range\n"
+"that is beyond the capabilities of your monitor: you may damage your "
+"monitor.\n"
+" If in doubt, choose a conservative setting."
 msgstr ""
+"ขั้นตอนต่อไปนี้จะต้องใส่พารามิเตอร์ที่มีความสำคัญสองตัว ได้แก่อัตราความถี่\n"
+"ของการสแกนภาพตามแนวตั้ง (vertical refresh rate) ซึ่งเป็นความถี่ที่มีการ\n"
+"รีเฟรชจอภาพทั้งจอ และการอัตราสแกนภาพตามแนวนอน ซึ่งเป็นอัตราของการวาดของ\n"
+"เส้นกวาดสิ่งที่สำคัญมากก็คือ คุณจะต้องระบุชนิดของหน้าจอซึ่งอัตราความถี่ที่\n"
+"ไม่เกินความสามารถของจอภาพ ไม่เช่นนั้นอาจเกิดความเสียหายกับจอภาพได้\n"
+"หากไม่แน่ใจโปรดเลือกเซ็ตอัพแบบมาตรฐาน"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, fuzzy, c-format
-msgid "Montserrat"
-msgstr "พอร์ตของเม้าส์"
+msgid "Modify"
+msgstr "แก้ไข RAID"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mauritania"
+msgid ""
+"\n"
+"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
+"a particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\".\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Martinique"
+msgid "Need hostname, username and password!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
 #, c-format
-msgid "Northern Mariana Islands"
+msgid ""
+"WebDAV is a protocol that allows you to mount a web server's directory\n"
+"locally, and treat it like a local filesystem (provided the web server is\n"
+"configured as a WebDAV server). If you would like to add WebDAV mount\n"
+"points, select \"New\"."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Mongolia"
+msgid "HardDrake"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Myanmar"
-msgstr ""
+msgid "new"
+msgstr "ใหม่"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Would you like to try again?"
+msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"
+
+#: ../../help.pm:1 ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Mali"
-msgstr ""
+msgid "Wizard"
+msgstr "Wizard"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Macedonia"
-msgstr "Macedonian"
+msgid "Edit selected server"
+msgstr "ค้นพบ %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please choose where you want to backup"
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Marshall Islands"
-msgstr ""
+msgid "You need to reboot for the partition table modifications to take place"
+msgstr "คุณต้องทำการรีบูตระบบให้เครื่องรับทราบการเปลี่ยนแปลงตารางพาร์ติชั่น"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Madagascar"
+msgid "Do not include the browser cache"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "Moldova"
-msgstr ""
+msgid "Please, choose your keyboard layout."
+msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
 
-#: ../../lang.pm:1
+#: ../../mouse.pm:1 ../../security/level.pm:1
+#, c-format
+msgid "Standard"
+msgstr "Standard"
+
+#: ../../standalone/mousedrake:1
+#, c-format
+msgid "Please choose your mouse type."
+msgstr "คุณมีเม้าส์ชนิดใด"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Connect..."
+msgstr "ติดต่อ"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Monaco"
-msgstr "จอภาพ"
+msgid "Failed to configure printer \"%s\"!"
+msgstr "การคอนฟิกเครื่องพิมพ์"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "not configured"
+msgstr "คอนฟิกใหม่"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Morocco"
+msgid "ISA / PCMCIA"
+msgstr "ISA / PCMCIA"
+
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "About"
+msgstr "เลิก"
+
+#: ../../network/network.pm:1
+#, c-format
+msgid "Proxies configuration"
+msgstr "การคอนฟิก Proxies"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "GlidePoint"
+msgstr "GlidePoint"
+
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Start: sector %s\n"
+msgstr "เริ่มต้น: เซ็กเตอร์ %s\n"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Network interface already configured"
+msgstr "ไม่มีการคอนฟิกจอภาพ"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Couldn't access the floppy!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Libya"
+msgid "connecting to Bugzilla wizard ..."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Latvia"
-msgstr "ตำแหน่ง"
+msgid "Mail Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Luxembourg"
-msgstr ""
+msgid "Please click on a partition"
+msgstr "โปรดเลือกพาร์ติชั่น"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "Lithuania"
+msgid "Linux"
+msgstr "ลีนุกซ์"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Have a nice day!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Lesotho"
+msgid "across Network"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
+#, c-format
+msgid "/dev/fd0"
+msgstr "/dev/fd0"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Liberia"
-msgstr "พอร์ตอนุกรม"
+msgid "Upgrade %s"
+msgstr "Update"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Sri Lanka"
+msgid "Select Printer Connection"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Scanning for TV channels in progress ..."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Liechtenstein"
+msgid ""
+"Error during sending file via FTP.\n"
+" Please correct your FTP configuration."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Saint Lucia"
+msgid "IP Range Start:"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Lebanon"
+msgid ""
+"The internet superserver daemon (commonly called inetd) starts a\n"
+"variety of other internet services as needed. It is responsible for "
+"starting\n"
+"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
+"disables\n"
+"all of the services it is responsible for."
 msgstr ""
+"Internet superserver daemon (inetd) จะสั่งทำงานโปรแกรมหลายๆอย่าง\n"
+"เมื่อมีความต้องการเกิดขึ้น  ตัวอย่างโปรแกรมที่มันรับผิดชอบคือ telnet\n"
+"ftp rsh และ rlogin  การยกเลิก inetd จะทำให้โปรแกรมทั้งหมดที่มันรับ\n"
+"ผิดชอบอยู่ไม่ทำงาน"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Laos"
+msgid "the height of the progress bar"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Kazakhstan"
+msgid ""
+"\n"
+"- Save via %s on host: %s\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Cayman Islands"
+msgid "Argentina"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse broadcasted icmp echo."
+msgstr ""
+
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Kuwait"
-msgstr "ออก"
+msgid "Domain Name Server"
+msgstr "ชื่อโดเมน"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Korea"
-msgstr "More"
+msgid "Security Level:"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
 
-#: ../../lang.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Korea (North)"
-msgstr ""
+msgid "Mount points must begin with a leading /"
+msgstr "จุดเม้าท์จะต้องเริ่มด้วย /"
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Postfix Mail Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Saint Kitts and Nevis"
-msgstr ""
+msgid "Quit without saving"
+msgstr "ออกโดยไม่ต้องบันทึก"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Comoros"
+msgid "Yemen"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "Kiribati"
+msgid "This product is available on the MandrakeStore Web site."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cambodia"
+msgid ""
+"Please enter the maximum size\n"
+" allowed for Drakbackup"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Kyrgyzstan"
+msgid "=> There are many things to choose from (%s).\n"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Kenya"
-msgstr "คีย์บอร์ด"
+#: ../../steps.pm:1
+#, c-format
+msgid "Hard drive detection"
+msgstr "การตรวจหาฮาร์ดไดรว์"
 
-#: ../../lang.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Japan"
-msgstr "ญี่ปุ่น"
+msgid ""
+"You haven't selected any group of packages.\n"
+"Please choose the minimal installation you want:"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "Jordan"
-msgstr "Iranian"
+msgid "Please enter the WebDAV server URL"
+msgstr "กรุณาทดสอบเม้าส์"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Jamaica"
+msgid "Tajikistan"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Iceland"
-msgstr "ไอซ์แลนด์"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
+#, c-format
+msgid "Accept"
+msgstr "ยอมรับ"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Description"
+msgstr "รายละเอียด"
+
+#: ../../fsedit.pm:1
+#, c-format
+msgid "Error opening %s for writing: %s"
+msgstr "เกิดข้อผิดพลาดในการเปิด %s สำหรับการเขียน: %s"
+
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse type: %s\n"
+msgstr "เลือกชนิดของเม้าส์: %s\n"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Your card can have 3D hardware acceleration support with XFree %s."
+msgstr "Your card can have 3D hardware acceleration support with XFree %s."
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Iran"
-msgstr "Iranian"
+msgid "Please choose your CD/DVD media size (Mb)"
+msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Iraq"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enabling su only from members of the wheel group or allow su from any user."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "British Indian Ocean Territory"
+msgid "Expert Area"
+msgstr "ส่วนของผู้เชี่ยวชาญ"
+
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Choose a monitor"
+msgstr "เลือกจอภาพ"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Empty label not allowed"
+msgstr "ไม่อนุญาตให้มีหัวข้อว่าง"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Maltese (UK)"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "India"
-msgstr "Iranian"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "I can't add any more partition"
+msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Israel"
-msgstr "อิสราเอล"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Size in MB: "
+msgstr "ขนาดเป็น MB: "
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Remote printer"
+msgstr "เครื่องพิมพ์แบบรีโมท"
+
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Ireland"
-msgstr "ไอซ์แลนด์"
+msgid "Please choose a language to use."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
 
-#: ../../lang.pm:1
+#: ../../network/network.pm:1
+#, c-format
+msgid ""
+"WARNING: this device has been previously configured to connect to the "
+"Internet.\n"
+"Simply accept to keep this device configured.\n"
+"Modifying the fields below will override this configuration."
+msgstr ""
+"คำเตือน: อุปกรณ์นี้ได้ถูกปรับแต่งให้ใช้ในการต่อเข้า internet\n"
+"คุณสามารถยอมรับค่าต่างๆหรือทำการแก้ใขค่าต่างๆข้างล่างนี้\n"
+" "
+
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Indonesia"
-msgstr "ไม่มี"
+msgid "I can set up your computer to automatically log on one user."
+msgstr ""
+"ผมไม่สามารถทำให้ท่านเข้าทำงานโดยใช้ชื่อคนคนหนึ่งแบบอัตโนมัติ\n"
+"ถ้าคุณไม่ต้องการใช้งานรูปแบบนี้กรุณากดปุ่มยกเลิก"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Hungary"
-msgstr "อังการี"
+msgid "Floppy format"
+msgstr "ฟอร์แมต"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Haiti"
+msgid ""
+"the WP flag in the CR0 register enforce write proctection at the memory page "
+"level, thus enabling the processor to prevent kernel accesses)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Croatia"
-msgstr "Croatian"
+msgid "Generic Printers"
+msgstr "เครื่องพิมพ์"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Honduras"
+msgid ""
+"Please choose the printer to which the print jobs should go or enter a "
+"device name/file name in the input line"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Heard and McDonald Islands"
+msgid "The scanners on this machine are available to other computers"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "First sector of the root partition"
+msgstr "เซ็กเตอร์แรกของบูตพาร์ติชั่น"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Alternative drivers"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hong Kong"
+msgid ""
+"\n"
+"Please check all options that you need.\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "China"
-msgstr "จีน"
+msgid "Initrd"
+msgstr "Initrd"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Cape Verde"
+msgstr "ยุบ tree"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Guyana"
+msgid "whether this cpu has the Cyrix 6x86 Coma bug"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Guinea-Bissau"
+msgid "early pentiums were buggy and freezed when decoding the F00F bytecode"
 msgstr ""
 
 #: ../../lang.pm:1
@@ -5074,1157 +4204,1614 @@ msgstr ""
 msgid "Guam"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Guatemala"
-msgstr "เกตเวย์"
-
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "South Georgia and the South Sandwich Islands"
+msgid ""
+"Please choose the port that your printer is connected to or enter a device "
+"name/file name in the input line"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Equatorial Guinea"
-msgstr ""
+msgid "/Options/Test"
+msgstr "/Options/ทดลอง"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Guadeloupe"
+msgid ""
+"This level is to be used with care. It makes your system more easy to use,\n"
+"but very sensitive. It must not be used for a machine connected to others\n"
+"or to the Internet. There is no password access."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "Guinea"
-msgstr "ทั่วไป"
+msgid "Mounting partition %s"
+msgstr "ฟอร์แมตพาร์ติชั่น %s"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Gambia"
-msgstr ""
+msgid "User name"
+msgstr "ชื่อผู้ใช้"
 
-#: ../../lang.pm:1
+#: ../../network/isdn.pm:1
 #, fuzzy, c-format
-msgid "Greenland"
-msgstr "ไอซ์แลนด์"
+msgid "New configuration (isdn-light)"
+msgstr "ตรวจพบคอนฟิกของ Firewall"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Userdrake"
+msgstr "เครื่องพิมพ์"
+
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Gibraltar"
-msgstr ""
+msgid "Which partition do you want to use for Linux4Win?"
+msgstr "พาร์ติชั่นใหนที่ท่านต้องการใช้กับ Linux4Win"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system"
+msgstr "เซ็ตอัพระบบไฟล์"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Test pages"
+msgstr "กำลังตรวจสอบพอร์ต"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Ghana"
+msgid ""
+"List of data to restore:\n"
+"\n"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "French Guiana"
-msgstr "ฝรั่งเศษ"
+msgid "Checking %s"
+msgstr "ความละเอียดของภาพ %s\n"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Georgia"
-msgstr "นอร์เวย์"
+msgid "TCP/Socket Printer Options"
+msgstr "อ็อปชั่นของเครื่องพิมพ์โลคอล"
 
-#: ../../lang.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Grenada"
-msgstr ""
+msgid "Card mem (DMA)"
+msgstr "Card mem (DMA)"
 
-#: ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "France"
+msgstr "ฝรั่งเศษ"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "United Kingdom"
-msgstr "อังกฤษ"
+msgid "browse"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Gabon"
+msgid "Checking installed software..."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Faroe Islands"
-msgstr "ไอซ์แลนด์"
+msgid "Remote printer name missing!"
+msgstr "ชื่อโฮสต์รีโมท"
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Micronesia"
-msgstr "Macedonian"
+msgid "Do you want to enable printing on printers in the local network?\n"
+msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Falkland Islands (Malvinas)"
+msgid "Turkey"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../network/adsl.pm:1
+#, c-format
+msgid "Alcatel speedtouch usb"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Fiji"
-msgstr "ฟินแลนด์"
+msgid "Number of buttons"
+msgstr "2 buttons"
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Finland"
-msgstr "ฟินแลนด์"
+msgid "Vietnamese \"numeric row\" QWERTY"
+msgstr "Vietnamese \"numeric row\" QWERTY"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Ethiopia"
-msgstr "Estonian"
+msgid "Module"
+msgstr "Mouse"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Spain"
-msgstr "สเปน"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"In addition, queues not created with this program or \"foomatic-configure\" "
+"cannot be transferred."
+msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Eritrea"
-msgstr "ส่วนของผู้เชี่ยวชาญ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Hardware"
+msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Western Sahara"
+msgid "Ctrl and Alt keys simultaneously"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#, c-format
+msgid "United States"
+msgstr "สหรัฐอเมริกา"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Default OS?"
+msgstr "Default OS?"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Swiss (German layout)"
+msgstr "สวิส (เลย์เอ้าท์ตามเยอรมัน)"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "Configure all heads independently"
+msgstr "Configure all heads independently"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Please choose the printer you want to set up. The configuration of the "
+"printer will work fully automatically. If your printer was not correctly "
+"detected or if you prefer a customized printer configuration, turn on "
+"\"Manual configuration\"."
+msgstr ""
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Egypt"
-msgstr "ว่าง"
+msgid "NTP Server"
+msgstr "เซิร์ฟเวอร์ NIS"
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "Estonia"
-msgstr "Estonian"
+msgid "Load/Save on floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
 
-#: ../../lang.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Ecuador"
+msgid "This theme does not yet have a bootsplash in %s !"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../pkgs.pm:1
+#, c-format
+msgid "nice"
+msgstr "ดี"
+
+#: ../../Xconfig/test.pm:1
 #, fuzzy, c-format
-msgid "Algeria"
-msgstr "พอร์ตอนุกรม"
+msgid "Leaving in %d seconds"
+msgstr "%d วินาที"
 
-#: ../../lang.pm:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "Dominican Republic"
-msgstr ""
+msgid "Please choose which serial port your modem is connected to."
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Dominica"
-msgstr "โดเมน NIS"
+msgid "Country"
+msgstr "เม้าท์"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Property"
+msgstr "Port"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Denmark"
+msgid "Ghostscript"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Djibouti"
-msgstr "เลิก"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "LAN Configuration"
+msgstr "การปรับแต่ง LAN"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Cyprus"
+msgid "Ghana"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Christmas Island"
+msgid "Path or Module required"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Cape Verde"
-msgstr "ยุบ tree"
+msgid "Advanced Options"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../lang.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Cuba"
+msgid "Coma bug"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Colombia"
+msgid ""
+"At this point, you need to choose which partition(s) will be used for the\n"
+"installation of your Mandrake Linux system. If partitions have already been\n"
+"defined, either from a previous installation of GNU/Linux or by another\n"
+"partitioning tool, you can use existing partitions. Otherwise, hard drive\n"
+"partitions must be defined.\n"
+"\n"
+"To create partitions, you must first select a hard drive. You can select\n"
+"the disk for partitioning by clicking on ``hda'' for the first IDE drive,\n"
+"``hdb'' for the second, ``sda'' for the first SCSI drive and so on.\n"
+"\n"
+"To partition the selected hard drive, you can use these options:\n"
+"\n"
+" * \"%s\": this option deletes all partitions on the selected hard drive\n"
+"\n"
+" * \"%s\": this option enables you to automatically create ext3 and swap\n"
+"partitions in the free space of your hard drive\n"
+"\n"
+"\"%s\": gives access to additional features:\n"
+"\n"
+" * \"%s\": saves the partition table to a floppy. Useful for later\n"
+"partition-table recovery if necessary. It is strongly recommended that you\n"
+"perform this step.\n"
+"\n"
+" * \"%s\": allows you to restore a previously saved partition table from a\n"
+"floppy disk.\n"
+"\n"
+" * \"%s\": if your partition table is damaged, you can try to recover it\n"
+"using this option. Please be careful and remember that it doesn't always\n"
+"work.\n"
+"\n"
+" * \"%s\": discards all changes and reloads the partition table that was\n"
+"originally on the hard drive.\n"
+"\n"
+" * \"%s\": unchecking this option will force users to manually mount and\n"
+"unmount removable media such as floppies and CD-ROMs.\n"
+"\n"
+" * \"%s\": use this option if you wish to use a wizard to partition your\n"
+"hard drive. This is recommended if you do not have a good understanding of\n"
+"partitioning.\n"
+"\n"
+" * \"%s\": use this option to cancel your changes.\n"
+"\n"
+" * \"%s\": allows additional actions on partitions (type, options, format)\n"
+"and gives more information about the hard drive.\n"
+"\n"
+" * \"%s\": when you are finished partitioning your hard drive, this will\n"
+"save your changes back to disk.\n"
+"\n"
+"When defining the size of a partition, you can finely set the partition\n"
+"size by using the Arrow keys of your keyboard.\n"
+"\n"
+"Note: you can reach any option using the keyboard. Navigate through the\n"
+"partitions using [Tab] and the [Up/Down] arrows.\n"
+"\n"
+"When a partition is selected, you can use:\n"
+"\n"
+" * Ctrl-c to create a new partition (when an empty partition is selected)\n"
+"\n"
+" * Ctrl-d to delete a partition\n"
+"\n"
+" * Ctrl-m to set the mount point\n"
+"\n"
+"To get information about the different file system types available, please\n"
+"read the ext2FS chapter from the ``Reference Manual''.\n"
+"\n"
+"If you are installing on a PPC machine, you will want to create a small HFS\n"
+"``bootstrap'' partition of at least 1MB which will be used by the yaboot\n"
+"bootloader. If you opt to make the partition a bit larger, say 50MB, you\n"
+"may find it a useful place to store a spare kernel and ramdisk images for\n"
+"emergency boot situations."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Cameroon"
+msgid ""
+"Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error installing packages:"
+msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Chile"
-msgstr "เลือก file"
+msgid "Lexmark inkjet configuration"
+msgstr "การคอนฟิก Internet"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cook Islands"
-msgstr ""
+msgid "Undo"
+msgstr "ยกเลิก"
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Save partition table"
+msgstr "บันทึกตารางพาร์ติชั่น"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Cote d'Ivoire"
-msgstr ""
+msgid "Finnish"
+msgstr "ฟินแลนด์"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Macedonia"
+msgstr "Macedonian"
+
+#: ../../any.pm:1
 #, c-format
-msgid "Switzerland"
+msgid ""
+"The per-user sharing uses the group \"fileshare\". \n"
+"You can use userdrake to add a user to this group."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Congo (Brazzaville)"
-msgstr ""
+msgid "Slovenian"
+msgstr "สโลวาเนีย"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Central African Republic"
+msgid "Libya"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Congo (Kinshasa)"
-msgstr ""
+msgid "Configuring scripts, installing software, starting servers..."
+msgstr "กำลังปรับแต่ง scripts ติดตั้งโปรแกรม และเริ่มทำงาน servers..."
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cocos (Keeling) Islands"
+msgid ""
+"\n"
+"- Burn to CD"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Canada"
-msgstr "ปฎิทิน"
+#: ../../any.pm:1
+#, c-format
+msgid "Table"
+msgstr "Table"
 
-#: ../../lang.pm:1
+#: ../../fs.pm:1
+#, c-format
+msgid "I don't know how to format %s in type %s"
+msgstr "ไม่ทราบว่าจะฟอร์แมต %s เป็นชนิด %s ได้อย่างไร"
+
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Belize"
-msgstr "เปลี่ยนขนาด"
+msgid "Model"
+msgstr "Mouse"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable libsafe if libsafe is found on the system."
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Belarus"
-msgstr "Belarusian"
+msgid "Stop Server"
+msgstr "เซิร์ฟเวอร์ NIS"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakboot:1
+#, c-format
+msgid ""
+"\n"
+"Select the theme for\n"
+"lilo and bootsplash,\n"
+"you can choose\n"
+"them separately"
+msgstr ""
+
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Botswana"
-msgstr "Estonian"
+msgid "Modem"
+msgstr "Mouse"
 
-#: ../../lang.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Bouvet Island"
+msgid ""
+"Arguments: (arg, listen_tcp=None)\n"
+"\n"
+"Allow/Forbid X connections. First arg specifies what is done\n"
+"on the client side: ALL (all connections are allowed), LOCAL (only\n"
+"local connection) and NONE (no connection)."
 msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Bhutan"
+msgid "Tuvalu"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../help.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Bahamas"
+msgid "Use auto detection"
+msgstr "ใช้ auto detection"
+
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"GPM adds mouse support to text-based Linux applications such the\n"
+"Midnight Commander. It also allows mouse-based console cut-and-paste "
+"operations,\n"
+"and includes support for pop-up menus on the console."
 msgstr ""
+"GPM ทำให้สามารถใช้ mouse กับโปรแกรมที่รันใน text mode\n"
+"มันยังช่วยทำให้สามารถใช้ cut-and-paste และ popup-menu \n"
+"ด้วย"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Brazil"
-msgstr "บราซิล"
+msgid "Started on boot"
+msgstr "เริ่มทำงานตอน boot"
 
-#: ../../lang.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Bolivia"
+msgid ""
+"Join the MandrakeSoft support teams and the Linux Community online to share "
+"your knowledge and help others by becoming a recognized Expert on the online "
+"technical support website:"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "Brunei Darussalam"
+msgid ""
+"The following options can be set to customize your\n"
+"system security. If you need an explanation, look at the help tooltip.\n"
 msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Bermuda"
-msgstr "เยอรมัน"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Automatically find available printers on remote machines"
+msgstr ""
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Benin"
-msgstr "เบลเยี่ยม"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Save to Tape on device: %s"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Burundi"
+msgid "East Timor"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Bahrain"
+msgid "Del profile..."
+msgstr "ลบ profile..."
+
+#: ../../security/help.pm:1
+#, c-format
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid the list of users on the system on display managers (kdm and "
+"gdm)."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Bulgaria"
-msgstr "อังการี"
+msgid "Installing Foomatic..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
 
-#: ../../lang.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Burkina Faso"
+msgid "Please log out and then use Ctrl-Alt-BackSpace"
+msgstr "กรุณาออกไปและใช้ Ctrl-Alt-BackSpace"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "detected"
+msgstr "ค้นพบ %s"
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "The network needs to be restarted. Do you want to restart it ?"
 msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Package: "
+msgstr "เลือกกลุ่มแพ็คเก็จ"
+
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Bangladesh"
+msgid "Can't write /etc/sysconfig/bootsplash."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Barbados"
+msgid "SECURITY WARNING!"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "StarOffice"
+msgstr "ดี"
+
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Bosnia and Herzegovina"
+msgid "No, I don't want autologin"
+msgstr "ไม่ต้องการ autologin"
+
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Windows Migration tool"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, fuzzy, c-format
-msgid "Azerbaijan"
-msgstr "Iranian"
+msgid "All languages"
+msgstr "เลือกภาษาที่คุณใช้"
 
-#: ../../lang.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Aruba"
-msgstr "Grub"
+msgid "Removing %s"
+msgstr "ความละเอียดของภาพ %s\n"
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Testing your connection..."
+msgstr "ทดสอบ connection..."
+
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Australia"
-msgstr "พอร์ตอนุกรม"
+msgid "Cache size"
+msgstr "ขนาดของ chunk"
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "American Samoa"
+msgid ""
+"Passwords are now enabled, but use as a networked computer is still not "
+"recommended."
 msgstr ""
 
-#: ../../lang.pm:1 ../../standalone/drakxtv:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Argentina"
-msgstr ""
+msgid "Start sector: "
+msgstr "เริ่มเซ็กเตอร์: "
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Antarctica"
+msgid "Congo (Brazzaville)"
 msgstr ""
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Angola"
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
+#, fuzzy, c-format
+msgid "The package %s needs to be installed. Do you want to install it?"
 msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
 
 #: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Seychelles"
+msgstr "เชลล์ที่ใช้"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Netherlands Antilles"
+msgid ""
+"Printerdrake has compared the model name resulting from the printer auto-"
+"detection with the models listed in its printer database to find the best "
+"match. This choice can be wrong, especially when your printer is not listed "
+"at all in the database. So check whether the choice is correct and click "
+"\"The model is correct\" if so and if not, click \"Select model manually\" "
+"so that you can choose your printer model manually on the next screen.\n"
+"\n"
+"For your printer Printerdrake has found:\n"
+"\n"
+"%s"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Armenia"
-msgstr "อาร์เมเนียน (เก่า)"
+msgid "Bad password on %s"
+msgstr "ไม่มีรหัสผ่าน"
 
-#: ../../lang.pm:1
-#, fuzzy, c-format
-msgid "Albania"
-msgstr "Iranian"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"\n"
+"There is one unknown printer directly connected to your system"
+msgstr ""
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Anguilla"
+msgid "Zambia"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "Antigua and Barbuda"
+msgid "Security Administrator (login or email)"
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "United Arab Emirates"
+msgid "Sorry, we support only 2.4 kernels."
 msgstr ""
 
-#: ../../lang.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Andorra"
-msgstr "ยกเลิก"
+msgid "Romanian (qwerty)"
+msgstr "รัสเซีย (Yawerty)"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Under Devel ... please wait."
+msgstr ""
+
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, c-format
+msgid "Czech Republic"
+msgstr "สาธารณรัฐเช็ค"
 
 #: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Afghanistan"
-msgstr "Iranian"
+msgid "Egypt"
+msgstr "ว่าง"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "default:LTR"
-msgstr "default:LTR"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Old configuration (isdn4net)"
+msgstr "ตรวจพบคอนฟิกของ Firewall"
 
-#: ../../loopback.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Circular mounts %s\n"
-msgstr "Circular mounts %s\n"
+msgid "Sound card"
+msgstr "Sound card"
 
-#: ../../lvm.pm:1
-#, c-format
-msgid "Remove the logical volumes first\n"
-msgstr "ลบ logical volume ก่อน\n"
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Import Fonts"
+msgstr "ฟอร์แมตพาร์ติชั่น"
 
-#: ../../modules.pm:1
-#, c-format
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
 msgid ""
-"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
+"You have one big MicroSoft Windows partition.\n"
+"I suggest you first resize that partition\n"
+"(click on it, then click on \"Resize\")"
 msgstr ""
+"ถ้าคุณมี พาร์ติชั่น FAT ที่ใหญ่ พาร์ติชั่น เดียว\n"
+"(ซึ่งโดยปกติ Microsoft Dos/Windows ใข้)\n"
+"ผมแนะนำให้คุณปรับขนาด พาร์ติชั่น เสียก่อน\n"
+"(กดที่มันแล้วกด \"ปรับขนาด\")"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "MOVE YOUR WHEEL!"
-msgstr "เลื่อนล้อของคุณ"
+msgid "Suppress Temporary Files"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "To activate the mouse,"
-msgstr "เพื่อให้เม้าส์ทำงาน"
+msgid "Change partition type"
+msgstr "เปลี่ยนประเภทพาร์ติชั่น"
 
-#: ../../mouse.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Please test the mouse"
-msgstr "กรุณาทดสอบเม้าส์"
+msgid ""
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor."
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "No mouse"
-msgstr "ไม่มีเม้าส์"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Network Options"
+msgstr "อ๊อปชั่นของโมดูล:"
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "none"
-msgstr "ไม่มี"
+msgid ""
+"Display theme\n"
+"under console"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "3 buttons"
-msgstr "3 buttons"
+msgid "Statistics"
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "2 buttons"
-msgstr "2 buttons"
+#: ../../printer/cups.pm:1
+#, fuzzy, c-format
+msgid "(on %s)"
+msgstr "(โมดูล %s)"
 
 #: ../../mouse.pm:1
 #, c-format
-msgid "1 button"
-msgstr "1 ปุ่ม"
+msgid "MM Series"
+msgstr "MM Series"
 
-#: ../../mouse.pm:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "busmouse"
-msgstr "busmouse"
+msgid ""
+"A library which defends against buffer overflow and format string attacks."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Kensington Thinking Mouse"
-msgstr "Kensington Thinking Mouse"
+msgid "average"
+msgstr ""
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Logitech Mouse (serial, old C7 type)"
-msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "New printer name"
+msgstr "ไม่มีเครื่องพิมพ์"
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "MM HitTablet"
-msgstr "MM HitTablet"
+msgid "Equatorial Guinea"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "MM Series"
-msgstr "MM Series"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid autologin."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Build Backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Genius NetMouse"
-msgstr "Genius NetMouse"
+msgid ""
+"To print a file from the command line (terminal window) use the command \"%s "
+"<file>\" or \"%s <file>\".\n"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logitech MouseMan+/FirstMouse+"
-msgstr "Logitech MouseMan+/FirstMouse+"
+msgid "Currently, no alternative possibility is available"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Romanian (qwertz)"
+msgstr "รัสเซีย (Yawerty)"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Write Config"
+msgstr "คอนฟิกใหม่"
+
+#: ../../services.pm:1
 #, c-format
-msgid "Logitech CC Series"
-msgstr "Logitech CC Series"
+msgid ""
+"The routed daemon allows for automatic IP router table updated via\n"
+"the RIP protocol. While RIP is widely used on small networks, more complex\n"
+"routing protocols are needed for complex networks."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Mouse Systems"
-msgstr "Mouse Systems"
+msgid "Kiribati"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Logitech MouseMan"
-msgstr "Logitech MouseMan"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid remote root login."
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Microsoft IntelliMouse"
-msgstr "Microsoft IntelliMouse"
+msgid "Browse"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Generic 3 Button Mouse"
-msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"
+msgid "CDROM"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Generic 2 Button Mouse"
-msgstr "Generic 2 Button Mouse"
+msgid "Do you want to try to connect to the Internet now?"
+msgstr "คุณต้องการทดสอบต่อเข้า Internet เดี๋ยวนี้หรือไม่"
 
-#: ../../mouse.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "serial"
-msgstr "พอร์ตอนุกรม"
+msgid "Belgian"
+msgstr "เบลเยี่ยม"
 
-#: ../../mouse.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Microsoft Explorer"
-msgstr "Microsoft IntelliMouse"
+msgid "Do you have an ISA sound card?"
+msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
 
-#: ../../mouse.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Wheel"
-msgstr "Wheel"
+msgid ""
+"No ethernet network adapter has been detected on your system.\n"
+"I cannot set up this connection type."
+msgstr ""
+"ไม่พบการ์ด ethernet \n"
+"ผมไม่สามารถจัดทำการติดต่อชนิดนี้"
 
-#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
-#, c-format
-msgid "Generic"
-msgstr "Generic"
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "Windows"
+msgstr "โดเมน NIS"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "Genius NetScroll"
-msgstr "Genius NetScroll"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Can't make screenshots before partitioning"
+msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
 
-#: ../../mouse.pm:1
-#, c-format
-msgid "GlidePoint"
-msgstr "GlidePoint"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Host Name"
+msgstr "ชื่อโฮสต์:"
 
-#: ../../mouse.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Generic PS2 Wheel Mouse"
-msgstr "Generic PS2 Wheel Mouse"
+msgid "/File/Save _As"
+msgstr "/ไฟล์/บันทึก_เป็น"
 
-#: ../../mouse.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Logitech MouseMan+"
-msgstr "Logitech MouseMan+"
+msgid ""
+"To get access to printers on remote CUPS servers in your local network you "
+"only need to turn on the \"Automatically find available printers on remote "
+"machines\" option; the CUPS servers inform your machine automatically about "
+"their printers. All printers currently known to your machine are listed in "
+"the \"Remote printers\" section in the main window of Printerdrake. If your "
+"CUPS server(s) is/are not in your local network, you have to enter the IP "
+"address(es) and optionally the port number(s) here to get the printer "
+"information from the server(s)."
+msgstr ""
 
-#: ../../mouse.pm:1 ../../security/level.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Standard"
-msgstr "Standard"
+msgid "%s is not in the scanner database, configure it manually?"
+msgstr ""
 
-#: ../../mouse.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Sun - Mouse"
-msgstr "Sun - Mouse"
+msgid "Delay before booting default image"
+msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Toggle between flat and group sorted"
-msgstr "เปลี่ยนไปมาระหว่างการจัดเรียงแบบ flat หรือ group"
+msgid "Restrict command line options"
+msgstr "อ็อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "East Europe"
+msgstr "ยุโรป"
+
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Collapse Tree"
-msgstr "ยุบ tree"
+msgid "Use free space"
+msgstr "ใช้พื้นที่ที่ว่าง"
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Expand Tree"
-msgstr "ขยาย tree"
+msgid "use dhcp"
+msgstr "ใช้ dhcp"
 
-#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Info"
-msgstr "ข้อมูล"
+msgid "Mail alert"
+msgstr ""
 
-#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../network/tools.pm:1
 #, c-format
-msgid "Is this correct?"
-msgstr "ถูกต้องหรือไม่?"
+msgid "Internet configuration"
+msgstr "การคอนฟิก Internet"
 
-#: ../../my_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgid "Uzbekistan"
 msgstr ""
 
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Error writing to file %s"
-msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Detected %s"
+msgstr "ค้นพบ %s"
 
-#: ../../partition_table.pm:1
-#, c-format
-msgid "Bad backup file"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _printers"
+msgstr "ใช้ auto detection"
 
-#: ../../partition_table.pm:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../interactive/newt.pm:1
 #, c-format
-msgid "Restoring from file %s failed: %s"
-msgstr "การกู้คืนจากไฟล์ %s ล้มเหลว: %s"
+msgid "Finish"
+msgstr "เสร็จแล้ว"
 
-#: ../../partition_table.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"You have a hole in your partition table but I can't use it.\n"
-"The only solution is to move your primary partitions to have the hole next "
-"to the extended partitions."
+msgid "Show automatically selected packages"
 msgstr ""
-"คุณมีช่องว่างในตารางพาร์ติชั่น  แต่โปรแกรมจะไม่ใช้งานช่องว่างนั้น\n"
-"การแก้ไขปัญหาสามารถทำได้โดยย้ายไพรมารีพาร์ติชั่น เพื่อให้ช่องว่าไปต่อท้ายพาร์ติชั่นแบบ extended"
 
-#: ../../partition_table.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Extended partition not supported on this platform"
-msgstr "Extended partition not supported on this platform"
+msgid "CPU flags reported by the kernel"
+msgstr ""
 
-#: ../../partition_table.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "mount failed: "
-msgstr "การเม้าท์ล้มเหลว: "
+msgid "Togo"
+msgstr ""
 
-#: ../../pkgs.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "maybe"
-msgstr "อาจจะ"
+msgid "Something went wrong! - Is mkisofs installed?"
+msgstr ""
 
-#: ../../pkgs.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "nice"
-msgstr "ดี"
+msgid "16 MB"
+msgstr "16 MB"
 
-#: ../../pkgs.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "very nice"
-msgstr "ดีมาก"
+msgid "Please try again"
+msgstr "โปรดลองอีกครั้ง"
 
-#: ../../pkgs.pm:1
-#, c-format
-msgid "important"
-msgstr "สำคัญ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The model is correct"
+msgstr "ถูกต้องหรือไม่?"
 
-#: ../../pkgs.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "must have"
-msgstr "ต้องมี"
+msgid "FAT resizing failed: %s"
+msgstr "การกำหนดขนาด FAT เกิดการผิดพลาด: %s"
 
-#: ../../raid.pm:1
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Not enough partitions for RAID level %d\n"
-msgstr "ไม่มีพาร์ติชั่นพอสำหรับ RAID ระดับ %d\n"
+msgid "Individual package selection"
+msgstr "Individual package selection"
 
-#: ../../raid.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "mkraid failed"
-msgstr "mkraid failed"
+msgid "This partition is not resizeable"
+msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"
 
-#: ../../raid.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "mkraid failed (maybe raidtools are missing?)"
-msgstr "mkraid failed (maybe raidtools are missing?)"
+msgid "Location"
+msgstr "ตำแหน่ง"
 
-#: ../../raid.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Can't add a partition to _formatted_ RAID md%d"
-msgstr "ไม่สามารถเพิ่มพาร์ติชั่นเป็น _formatted_ RAID md%d"
+msgid "USA (cable-hrc)"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, fuzzy, c-format
-msgid "Stop"
-msgstr "เซ็กเตอร์"
+msgid "Journalised FS"
+msgstr "การเม้าท์ล้มเหลว"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Start"
-msgstr "สถานะ:"
+msgid "Guatemala"
+msgstr "เกตเวย์"
 
-#: ../../services.pm:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "This machine"
+msgstr "matching"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "On boot"
-msgstr "ขณะ boot"
+msgid "DOS drive letter: %s (just a guess)\n"
+msgstr "อักษรไดรว์แบบดอส: %s (เป็นการคาดเดา)\n"
 
-#: ../../services.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"No additional information\n"
-"about this service, sorry."
+msgid "Select the files or directories and click on 'OK'"
 msgstr ""
-"ไม่มีข้อมูลเพิ่มเติม\n"
-"สำหรับการบริการนี้ ขอโทษครับ"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Services and deamons"
+msgid "Bahrain"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "stopped"
-msgstr "หยุด"
+msgid "omit scsi modules"
+msgstr "ยกเว้น scsi modules"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "running"
-msgstr "กำลังทำงาน"
+msgid "family of the cpu (eg: 6 for i686 class)"
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Choose which services should be automatically started at boot time"
-msgstr "เลือกการบริการที่ต้องการให้เริ่มตั้งแต่การเริ่มทำงานของเครื่อง"
+msgid ""
+"Because you are doing a network installation, your network is already "
+"configured.\n"
+"Click on Ok to keep your configuration, or cancel to reconfigure your "
+"Internet & Network connection.\n"
+msgstr ""
+"เนื่องจากคุณใช้การติดตั้งแบบ network ระบบ network จึงใช้ได้อยู่แล้ว\n"
+"กด OK เพื่อรักษาค่าคอนฟิกเดิมไว้ หรือเลือก ยกเลิกเพื่อปรับแต่งใหม่\n"
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Database Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Keyboard layout: %s\n"
+msgstr "เลือกชนิดของคีย์บอร์ด: %s\n"
 
-#: ../../services.pm:1
-#, fuzzy, c-format
-msgid "Remote Administration"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Here you can choose whether the printers connected to this machine should be "
+"accessable by remote machines and by which remote machines."
+msgstr ""
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "File sharing"
+msgid "Maltese (US)"
 msgstr ""
 
 #: ../../services.pm:1
 #, c-format
-msgid "Internet"
-msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
+msgid ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
+msgstr ""
+"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
+"Manager/Windows), and NCP (NetWare) mount points."
 
-#: ../../services.pm:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Printing"
-msgstr "เครื่องพิมพ์"
+msgid "Tvcard"
+msgstr "TV card"
 
-#: ../../services.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Starts the X Font Server (this is mandatory for XFree to run)."
-msgstr "เริ่มและหยุด X Font Server ตอน boot และ เลิก"
+msgid "Toggle between normal/expert mode"
+msgstr "สำหรับผู้ชำนาญ > ปกติ"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Load the drivers for your usb devices."
+msgid "Size"
+msgstr "ขนาด"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "GRUB"
+msgstr "GB"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Greenland"
+msgstr "ไอซ์แลนด์"
+
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan+/FirstMouse+"
+msgstr "Logitech MouseMan+/FirstMouse+"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Not the correct tape label. Tape is labelled %s."
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Syslog is the facility by which many daemons use to log messages\n"
-"to various system log files.  It is a good idea to always run syslog."
+"The setup of Internet Connection Sharing has already been done.\n"
+"It's currently enabled.\n"
+"\n"
+"What would you like to do?"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Launch the sound system on your machine"
-msgstr "รัน X-Window เมื่อเริ่มทำงาน"
+msgid "Delete All NBIs"
+msgstr "เลือกไฟล์"
 
-#: ../../services.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The rwho protocol lets remote users get a list of all of the users\n"
-"logged into a machine running the rwho daemon (similiar to finger)."
+"This dialog allows you to fine tune your bootloader:\n"
+"\n"
+" * \"%s\": there are three choices for your bootloader:\n"
+"\n"
+"    * \"%s\": if you prefer grub (text menu).\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its text menu interface.\n"
+"\n"
+"    * \"%s\": if you prefer LILO with its graphical interface.\n"
+"\n"
+" * \"%s\": in most cases, you will not change the default (\"%s\"), but if\n"
+"you prefer, the bootloader can be installed on the second hard drive\n"
+"(\"%s\"), or even on a floppy disk (\"%s\");\n"
+"\n"
+" * \"%s\": after a boot or a reboot of the computer, this is the delay\n"
+"given to the user at the console to select a boot entry other than the\n"
+"default.\n"
+"\n"
+"!! Beware that if you choose not to install a bootloader (by selecting\n"
+"\"%s\"), you must ensure that you have a way to boot your Mandrake Linux\n"
+"system! Be sure you know what you are doing before changing any of the\n"
+"options. !!\n"
+"\n"
+"Clicking the \"%s\" button in this dialog will offer advanced options which\n"
+"are normally reserved for the expert user."
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The rusers protocol allows users on a network to identify who is\n"
-"logged in on other responding machines."
+"if set, send the mail report to this email address else send it to root."
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"The rstat protocol allows users on a network to retrieve\n"
-"performance metrics for any machine on that network."
-msgstr ""
+msgid "Which configuration of XFree do you want to have?"
+msgstr "XFree ชนิดใหนที่คุณต้องการมี"
 
-#: ../../services.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The routed daemon allows for automatic IP router table updated via\n"
-"the RIP protocol. While RIP is widely used on small networks, more complex\n"
-"routing protocols are needed for complex networks."
-msgstr ""
+msgid "More"
+msgstr "More"
 
-#: ../../services.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"Assign raw devices to block devices (such as hard drive\n"
-"partitions), for the use of applications such as Oracle or DVD players"
+"With this security level, the use of this system as a server becomes "
+"possible.\n"
+"The security is now high enough to use the system as a server which can "
+"accept\n"
+"connections from many clients. Note: if your machine is only a client on the "
+"Internet, you should choose a lower level."
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Account Password"
+msgstr "รหัสผ่าน"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"Saves and restores system entropy pool for higher quality random\n"
-"number generation."
+"You decided to install the bootloader on a partition.\n"
+"This implies you already have a bootloader on the hard drive you boot (eg: "
+"System Commander).\n"
+"\n"
+"On which drive are you booting?"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid ""
-"Postfix is a Mail Transport Agent, which is the program that moves mail from "
-"one machine to another."
-msgstr ""
-"Postfix เป็นโปรแกรมทำหน้าที่ส่งจดหมายจากเครื่องหนึ่ง\n"
-"ไปอีกเครื่องหนึ่ง"
+msgid "Tajik keyboard"
+msgstr "ไทย"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The portmapper manages RPC connections, which are used by\n"
-"protocols such as NFS and NIS. The portmap server must be running on "
-"machines\n"
-"which act as servers for protocols which make use of the RPC mechanism."
+"You can copy the printer configuration which you have done for the spooler %"
+"s to %s, your current spooler. All the configuration data (printer name, "
+"description, location, connection type, and default option settings) is "
+"overtaken, but jobs will not be transferred.\n"
+"Not all queues can be transferred due to the following reasons:\n"
 msgstr ""
-"Portmapper บริหารการติดต่อของ RPC ซึ่งใช้กับ\n"
-"protocols เช่น NFS และ NIS Portmap server ต้องทำงานบนเครื่อง\n"
-"ที่ทำหน้าที่เป็น server ของ protocal ซึ่งเรียกใช้การทำงานแบบ RPC"
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Font List"
+msgstr "กำหนดจุดเม้าท์"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"PCMCIA support is usually to support things like ethernet and\n"
-"modems in laptops.  It won't get started unless configured so it is safe to "
-"have\n"
-"it installed on machines that don't need it."
+"You may need to change your Open Firmware boot-device to\n"
+" enable the bootloader.  If you don't see the bootloader prompt at\n"
+" reboot, hold down Command-Option-O-F at reboot and enter:\n"
+" setenv boot-device %s,\\\\:tbxi\n"
+" Then type: shut-down\n"
+"At your next boot you should see the bootloader prompt."
 msgstr ""
-"PCMCIA สนับสนุนการทำงานของอุปกรณ์หลายๆอย่างเช่น\n"
-"ethernet หรือ modem ในคอมพิวเตอร์แบบพกพา"
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Support the OKI 4w and compatible winprinters."
+msgid ""
+"You appear to have an OldWorld or Unknown\n"
+" machine, the yaboot bootloader will not work for you.\n"
+"The install will continue, but you'll\n"
+" need to use BootX or some other means to boot your machine"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Automatically switch on numlock key locker under console\n"
-"and XFree at boot."
-msgstr ""
+msgid "Select file"
+msgstr "เลือกไฟล์"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP\n"
-"networks. This service provides NFS file locking functionality."
+"Choose the network or host on which the local printers should be made "
+"available:"
 msgstr ""
-"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
-"มันให้การทำงานของNFS server "
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
-"This service provides NFS server functionality, which is configured via the\n"
-"/etc/exports file."
+"These commands you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications, but here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
-"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
-"มันให้การทำงานของNFS server ที่ระบุในไฟล์ /etc/exports"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Activates/Deactivates all network interfaces configured to start\n"
-"at boot time."
-msgstr ""
-"Activates/Deactivates network interfaces ทั้งหมด ที่ถูกตั้งให้\n"
-"เริ่มทำงานตอน boot"
+msgid "Japan"
+msgstr "ญี่ปุ่น"
 
-#: ../../services.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print option list"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์"
+
+#: ../../standalone/localedrake:1
 #, c-format
-msgid ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
+msgid "The change is done, but to be effective you must logout"
 msgstr ""
-"Mounts and unmounts all Network File System (NFS), SMB (Lan\n"
-"Manager/Windows), and NCP (NetWare) mount points."
 
-#: ../../services.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid ""
-"named (BIND) is a Domain Name Server (DNS) that is used to resolve host "
-"names to IP addresses."
+msgid "Search servers"
+msgstr "เซิร์ฟเวอร์ DNS"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NCP queue name missing!"
 msgstr ""
-"named (BIND) คือ Domain Name Server (DNS) ทำหน้าที่แปลงชื่อ\n"
-"host names เป็น IP addresses."
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
 msgid ""
-"Linux Virtual Server, used to build a high-performance and highly\n"
-"available server."
+"Warning, another internet connection has been detected, maybe using your "
+"network"
 msgstr ""
 
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Cd-Rom labeled \"%s\""
+msgstr "Cd-Rom labeled \"%s\""
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
-"lpd is the print daemon required for lpr to work properly. It is\n"
-"basically a server that arbitrates print jobs to printer(s)."
+"Saves and restores system entropy pool for higher quality random\n"
+"number generation."
 msgstr ""
-"lpd คือ print daemon ที่จำเป็นต้องมีถ้าต้องการให้ lpr ทำงานถูกต้อง\n"
-"ที่จริงแล้วมันคือ server ที่จัดการส่งงานพิมพ์ไปเครื่องพิมพ์"
 
-#: ../../services.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Linuxconf will sometimes arrange to perform various tasks\n"
-"at boot-time to maintain the system configuration."
+"Failed to check filesystem %s. Do you want to repair the errors? (beware, "
+"you can loose data)"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../share/advertising/07-server.pl:1
 #, c-format
-msgid "Automatic detection and configuration of hardware at boot."
+msgid "Turn your computer into a reliable server"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../network/network.pm:1
 #, c-format
+msgid " (driver %s)"
+msgstr " (driver %s)"
+
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
 msgid ""
-"Automatic regeneration of kernel header in /boot for\n"
-"/usr/include/linux/{autoconf,version}.h"
+"Loopback file(s):\n"
+"   %s\n"
+msgstr "Loopback file(s): %s\n"
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "I don't know"
+msgstr "ผมไม่ทราบ"
+
+#: ../../printer/main.pm:1
+#, c-format
+msgid ", TCP/IP host \"%s\", port %s"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"This package loads the selected keyboard map as set in\n"
-"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
-"You should leave this enabled for most machines."
+"You are about to configure an Auto Install floppy. This feature is somewhat "
+"dangerous and must be used circumspectly.\n"
+"\n"
+"With that feature, you will be able to replay the installation you've "
+"performed on this computer, being interactively prompted for some steps, in "
+"order to change their values.\n"
+"\n"
+"For maximum safety, the partitioning and formatting will never be performed "
+"automatically, whatever you chose during the install of this computer.\n"
+"\n"
+"Do you want to continue?"
 msgstr ""
-"แพกเกจนี้จะเรียกใช้ keyboard map ตามที่ระบุอยู่ใน \n"
-"/etc/sysconfig/keyboard  ซึ่งสามรถเลือกได้โดยใช้ kbdconfig\n"
-"คุณควรปล่อยให้มันทำงานในเครื่องทั่วไป"
 
-#: ../../services.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"Launch packet filtering for Linux kernel 2.2 series, to set\n"
-"up a firewall to protect your machine from network attacks."
+"\n"
+"\n"
+"Your card currently use the %s\"%s\" driver (default driver for your card is "
+"\"%s\")"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Uninstall"
+msgstr "ออกจากการติดตั้ง"
+
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"The internet superserver daemon (commonly called inetd) starts a\n"
-"variety of other internet services as needed. It is responsible for "
-"starting\n"
-"many services, including telnet, ftp, rsh, and rlogin. Disabling inetd "
-"disables\n"
-"all of the services it is responsible for."
+msgid " ("
 msgstr ""
-"Internet superserver daemon (inetd) จะสั่งทำงานโปรแกรมหลายๆอย่าง\n"
-"เมื่อมีความต้องการเกิดขึ้น  ตัวอย่างโปรแกรมที่มันรับผิดชอบคือ telnet\n"
-"ftp rsh และ rlogin  การยกเลิก inetd จะทำให้โปรแกรมทั้งหมดที่มันรับ\n"
-"ผิดชอบอยู่ไม่ทำงาน"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Cpuid level"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Mongolian (cyrillic)"
+msgstr "Azerbaidjani (cyrillic)"
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
-msgstr "Apache คือ World Wide Web server"
+msgid "Add a module"
+msgstr "เพิ่ม 1 module"
 
-#: ../../services.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"HardDrake runs a hardware probe, and optionally configures\n"
-"new/changed hardware."
-msgstr ""
+msgid "Profile to delete:"
+msgstr "profile ที่ต้องการลบ:"
 
-#: ../../services.pm:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Local measure"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"GPM adds mouse support to text-based Linux applications such the\n"
-"Midnight Commander. It also allows mouse-based console cut-and-paste "
-"operations,\n"
-"and includes support for pop-up menus on the console."
-msgstr ""
-"GPM ทำให้สามารถใช้ mouse กับโปรแกรมที่รันใน text mode\n"
-"มันยังช่วยทำให้สามารถใช้ cut-and-paste และ popup-menu \n"
-"ด้วย"
+msgid "busmouse"
+msgstr "busmouse"
 
-#: ../../services.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"cron is a standard UNIX program that runs user-specified programs\n"
-"at periodic scheduled times. vixie cron adds a number of features to the "
-"basic\n"
-"UNIX cron, including better security and more powerful configuration options."
-msgstr ""
-"cron คือโปรแกรมมาตรฐานของ Unix ที่สั่งทำงานโปรแกรมในเวลาที่กำหนด\n"
-"vixie cron เพิ่มความสามารถให้กับ UNIX cron ซึ่งรวมถึงเพิ่ม\n"
-"ระบบความปลอดภัยและ option การปรับแต่งอื่นๆ"
+msgid "Account Login (user name)"
+msgstr "Account Login (user name)"
 
-#: ../../services.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Runs commands scheduled by the at command at the time specified when\n"
-"at was run, and runs batch commands when the load average is low enough."
+msgid "Fdiv bug"
 msgstr ""
 
-#: ../../services.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
-"apmd is used for monitoring battery status and logging it via syslog.\n"
-"It can also be used for shutting down the machine when the battery is low."
+"drakfirewall configurator\n"
+"\n"
+"Make sure you have configured your Network/Internet access with\n"
+"drakconnect before going any further."
 msgstr ""
-"apmd คือโปรแกรมดูแลสถานะของ battery \n"
-"มันสามารถจะปิดเครื่องเมื่อเวลา battery มีไฟน้อย"
 
-#: ../../services.pm:1
-#, c-format
-msgid "Anacron is a periodic command scheduler."
-msgstr "Anacron คือโปรแกรมสำหรับตั้งเวลาทำงาน"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Benin"
+msgstr "เบลเยี่ยม"
 
-#: ../../services.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
+msgid "Uruguay"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Installing packages..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+msgid "Path selection"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
 
-#: ../../standalone.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"\n"
-"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
-"testing] [-v|--version] "
+msgid "Name/IP address of host:"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
+msgid "Monitor: %s\n"
+msgstr "จอภาพ: %s\n"
+
+#: ../../partition_table/raw.pm:1
+#, fuzzy, c-format
 msgid ""
-" [everything]\n"
-"       XFdrake [--noauto] monitor\n"
-"       XFdrake resolution"
+"Something bad is happening on your drive. \n"
+"A test to check the integrity of data has failed. \n"
+"It means writing anything on the disk will end up with random, corrupted "
+"data."
 msgstr ""
+"มีสิ่งไม่ดีเกิดขึ้นกับ disk ของคุณซึ่งเราไม่สามารถตรวจ\n"
+"สอบความถูกต้องของข้อมูลได้\n"
+"นั่นหมายความว่าการเขียนข้อมูลลงไปอาจกลายเป็นขยะ"
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer host name or IP missing!"
+msgstr "ชื่อของเครื่องพิมพ์"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check all users that you want to include in your backup."
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+
+#: ../../standalone/scannerdrake:1
 #, c-format
 msgid ""
-"[--manual] [--device=dev] [--update-sane=sane_source_dir] [--update-"
-"usbtable] [--dynamic=dev]"
+"The %s must be configured by printerdrake.\n"
+"You can launch printerdrake from the Mandrake Control Center in Hardware "
+"section."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"[OPTION]...\n"
-"  --no-confirmation      don't ask first confirmation question in "
-"MandrakeUpdate mode\n"
-"  --no-verify-rpm        don't verify packages signatures\n"
-"  --changelog-first      display changelog before filelist in the "
-"description window\n"
-"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgid "Bangladesh"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
+msgid "Japan (cable)"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"[OPTIONS]\n"
-"Network & Internet connection and monitoring application\n"
 "\n"
-"--defaultintf interface : show this interface by default\n"
-"--connect : connect to internet if not already connected\n"
-"--disconnect : disconnect to internet if already connected\n"
-"--force : used with (dis)connect : force (dis)connection.\n"
-"--status : returns 1 if connected 0 otherwise, then exit.\n"
-"--quiet : don't be interactive. To be used with (dis)connect."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer, connected directly to the network or to a remote Windows machine.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) and your Windows machines must be connected and "
+"turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network and/or Windows-hosted printers when you don't need "
+"it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Initial tests"
+msgstr "ข้อความ init"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
-msgstr ""
+msgid "Continue"
+msgstr "ทำงานต่อหรือไม่?"
 
-#: ../../standalone.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "[keyboard]"
-msgstr "คีย์บอร์ด"
+msgid "Custom Restore"
+msgstr "แบบปรับแก้ได้ (Customized) "
 
-#: ../../standalone.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"[OPTIONS]...\n"
-"Mandrake Terminal Server Configurator\n"
-"--enable         : enable MTS\n"
-"--disable        : disable MTS\n"
-"--start          : start MTS\n"
-"--stop           : stop MTS\n"
-"--adduser        : add an existing system user to MTS (requires username)\n"
-"--deluser        : delete an existing system user from MTS (requires "
-"username)\n"
-"--addclient      : add a client machine to MTS (requires MAC address, IP, "
-"nbi image name)\n"
-"--delclient      : delete a client machine from MTS (requires MAC address, "
-"IP, nbi image name)"
+"\"%s\": if a sound card is detected on your system, it is displayed here.\n"
+"If you notice the sound card displayed is not the one that is actually\n"
+"present on your system, you can click on the button and choose another\n"
+"driver."
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Font Importation and monitoring "
-"application                                     \n"
-"--windows_import : import from all available windows partitions.\n"
-"--xls_fonts      : show all fonts that already exist from xls\n"
-"--strong         : strong verification of font.\n"
-"--install        : accept any font file and any directry.\n"
-"--uninstall      : uninstall any font or any directory of font.\n"
-"--replace        : replace all font if already exist\n"
-"--application    : 0 none application.\n"
-"                 : 1 all application available supported.\n"
-"                 : name_of_application like  so for staroffice \n"
-"                 : and gs for ghostscript for only this one."
+msgid "Script-based"
+msgstr "รูปแบบสคริปต์"
+
+#: ../../install_any.pm:1 ../../partition_table.pm:1
+#, c-format
+msgid "Error reading file %s"
+msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
+
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "PLL setting:"
+msgstr "ฟอร์แมต"
+
+#: ../../install_interactive.pm:1 ../../install_steps.pm:1
+#, fuzzy, c-format
+msgid "You must have a FAT partition mounted in /boot/efi"
+msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid " on "
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/dav.pm:1
+#, c-format
+msgid "The URL must begin with http:// or https://"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"[OPTIONS] [PROGRAM_NAME]\n"
-"\n"
-"OPTIONS:\n"
-"  --help            - print this help message.\n"
-"  --report          - program should be one of mandrake tools\n"
-"  --incident        - program should be one of mandrake tools"
+"You can specify directly the URI to access the printer. The URI must fulfill "
+"either the CUPS or the Foomatic specifications. Note that not all URI types "
+"are supported by all the spoolers."
 msgstr ""
 
+#: ../../any.pm:1
+#, c-format
+msgid "Other OS (SunOS...)"
+msgstr "ระบบปฏิบัติการอื่นๆ (SunOS...)"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Install/Upgrade"
+msgstr "ติดตั้ง/อัพเกรด "
+
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "%d packages"
+msgstr "แพ็คเก็จ %d ชุด"
+
 #: ../../standalone.pm:1
 #, c-format
 msgid ""
@@ -6241,3920 +5828,4155 @@ msgid ""
 "--version             : show version number.\n"
 msgstr ""
 
-#: ../../standalone.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain Authentication Required"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"This program is free software; you can redistribute it and/or modify\n"
-"it under the terms of the GNU General Public License as published by\n"
-"the Free Software Foundation; either version 2, or (at your option)\n"
-"any later version.\n"
 "\n"
-"This program is distributed in the hope that it will be useful,\n"
-"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-"GNU General Public License for more details.\n"
 "\n"
-"You should have received a copy of the GNU General Public License\n"
-"along with this program; if not, write to the Free Software\n"
-"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+" Thanks:\n"
+"\t- LTSP Project http://www.ltsp.org\n"
+"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
+"\n"
 msgstr ""
 
-#: ../../steps.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, c-format
-msgid "Exit install"
-msgstr "ออกจากการติดตั้ง"
+msgid "Costa Rica"
+msgstr "คอสตาริกา"
 
-#: ../../steps.pm:1
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "Install updates"
-msgstr "ติดตั้งระบบ"
-
-#: ../../steps.pm:1
-#, c-format
-msgid "Configure services"
-msgstr "ปรับแต่งการบริการต่างๆ"
+msgid "Use libsafe for servers"
+msgstr "เลือกออปชั่นเพิ่มเติมสำหรับเซิร์ฟเวอร์"
 
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Configure X"
-msgstr "คอนฟิกระบบ X"
+msgid "Icelandic"
+msgstr "ไอซ์แลนด์"
 
-#: ../../steps.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Install bootloader"
-msgstr "ติดตั้งบูตโหลดเดอร์"
+msgid ""
+"\n"
+"Usage: %s  [--auto] [--beginner] [--expert] [-h|--help] [--noauto] [--"
+"testing] [-v|--version] "
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../standalone/XFdrake:1
 #, c-format
-msgid "Configure networking"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+msgid "Please relog into %s to activate the changes"
+msgstr "กรุณาเข้าไปที่ %s อีกครั้งเพื่อเริ่มการเปลี่ยนแปลง"
 
-#: ../../steps.pm:1
+#: ../../my_gtk.pm:1
 #, c-format
-msgid "Add a user"
-msgstr "เพิ่มผู้ใช้"
+msgid "-adobe-utopia-regular-r-*-*-25-*-*-*-p-*-iso8859-*,*-r-*"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "Root password"
-msgstr "ไม่มีรหัสผ่าน"
+msgid "Lilo/grub mode"
+msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"
 
-#: ../../steps.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Install system"
-msgstr "ติดตั้งระบบ"
+msgid "Output"
+msgstr "Output"
 
-#: ../../steps.pm:1
+#: ../../loopback.pm:1
 #, c-format
-msgid "Choose packages to install"
-msgstr "เลือกแพ็คเก็จ"
+msgid "Circular mounts %s\n"
+msgstr "Circular mounts %s\n"
 
-#: ../../steps.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Format partitions"
-msgstr "ฟอร์แมตพาร์ติชั่น"
-
-#: ../../steps.pm:1
-#, fuzzy, c-format
-msgid "Partitioning"
-msgstr "เครื่องพิมพ์"
+msgid "Martinique"
+msgstr ""
 
-#: ../../steps.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Choose your keyboard"
-msgstr "เลือกคีย์บอร์ด"
+msgid "HardDrive / NFS"
+msgstr ""
 
-#: ../../steps.pm:1
-#, c-format
-msgid "Select installation class"
-msgstr "เลือกชุดการติดตั้ง"
+#: ../../modules/parameters.pm:1
+#, fuzzy, c-format
+msgid "a number"
+msgstr "หมายเลขโทรศัพท์"
 
-#: ../../steps.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Hard drive detection"
-msgstr "การตรวจหาฮาร์ดไดรว์"
+msgid "Swedish"
+msgstr "สวีเดน"
 
-#: ../../steps.pm:1
+#. -PO: the %s is the driver type (scsi, network, sound,...)
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Configure mouse"
-msgstr "คอนฟิกเม้าส์"
+msgid "Which %s driver should I try?"
+msgstr "ต้องการให้โปรแกรมทดลองใช้ไดรเวอร์ %s ชนิดใด?"
 
-#: ../../steps.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "License"
+msgid ""
+"You will receive an alert if one of the selected services is no longer "
+"running"
 msgstr ""
 
-#: ../../steps.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Language"
-msgstr "เลือกภาษาที่คุณใช้"
+msgid "Filesystem types:"
+msgstr "ประเภทของระบบไฟล์:"
 
-#: ../../ugtk2.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "utopia 25"
+msgid ", multi-function device on HP JetDirect"
 msgstr ""
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../network/netconnect.pm:1
-#: ../../standalone/drakTermServ:1 ../../standalone/drakbackup:1
-#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "OK"
-msgstr "OK"
+msgid "Northern Mariana Islands"
+msgstr ""
 
-#: ../../ugtk2.pm:1 ../../ugtk.pm:1 ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "logdrake"
-msgstr "logdrake"
+msgid "none"
+msgstr "ไม่มี"
 
-#: ../../ugtk.pm:1
-#, c-format
-msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
-msgstr ""
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user :"
+msgstr "ชื่อผู้ใช้"
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Xpmac (installation display driver)"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter your password"
+msgstr "โปรดลองอีกครั้ง"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
+"Name of the profile to create (the new profile is created as a copy of the "
+"current one) :"
 msgstr ""
-"Your card can have 3D hardware acceleration support with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-msgstr "XFree %s with EXPERIMENTAL 3D hardware acceleration"
-
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "Your card can have 3D hardware acceleration support with XFree %s."
-msgstr "Your card can have 3D hardware acceleration support with XFree %s."
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s with 3D hardware acceleration"
-msgstr "XFree %s with 3D hardware acceleration"
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
-msgstr ""
-"Your card can have 3D hardware acceleration support but only with XFree %s,\n"
-"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to erase your RW media (1st Session)"
+msgstr "โปรดเลือกพาร์ติชั่น"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
+msgid "Ghostscript referencing"
 msgstr ""
-"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
-"Your card is supported by XFree %s which may have a better support in 2D."
 
-#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
-#, c-format
-msgid "XFree %s"
-msgstr "XFree %s"
-
-#: ../../Xconfig/card.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Configure only card \"%s\"%s"
-msgstr "คอนฟิกเฉพาะการ์ด \"%s\" (%s)"
+msgid "Bootloader"
+msgstr "Bootloader ที่จะใช้"
 
-#: ../../Xconfig/card.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Use Xinerama extension"
-msgstr "Use Xinerama extension"
+msgid "Move"
+msgstr "ย้าย"
 
-#: ../../Xconfig/card.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Configure all heads independently"
-msgstr "Configure all heads independently"
+msgid "Bootloader to use"
+msgstr "Bootloader ที่จะใช้"
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Which configuration of XFree do you want to have?"
-msgstr "XFree ชนิดใหนที่คุณต้องการมี"
+msgid "SMB server host"
+msgstr "ชื่อโฮสต์ของ SMB server"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Name Servers:"
+msgstr "เซิร์ฟเวอร์ NIS"
+
+#: ../../install_messages.pm:1
 #, c-format
-msgid "XFree configuration"
-msgstr "การคอนฟิก XFree"
+msgid ""
+"\n"
+"Warning\n"
+"\n"
+"Please read carefully the terms below. If you disagree with any\n"
+"portion, you are not allowed to install the next CD media. Press 'Refuse' \n"
+"to continue the installation without using these media.\n"
+"\n"
+"\n"
+"Some components contained in the next CD media are not governed\n"
+"by the GPL License or similar agreements. Each such component is then\n"
+"governed by the terms and conditions of its own specific license. \n"
+"Please read carefully and comply with such specific licenses before \n"
+"you use or redistribute the said components. \n"
+"Such licenses will in general prevent the transfer,  duplication \n"
+"(except for backup purposes), redistribution, reverse engineering, \n"
+"de-assembly, de-compilation or modification of the component. \n"
+"Any breach of agreement will immediately terminate your rights under \n"
+"the specific license. Unless the specific license terms grant you such\n"
+"rights, you usually cannot install the programs on more than one\n"
+"system, or adapt it to be used on a network. In doubt, please contact \n"
+"directly the distributor or editor of the component. \n"
+"Transfer to third parties or copying of such components including the \n"
+"documentation is usually forbidden.\n"
+"\n"
+"\n"
+"All rights to the components of the next CD media belong to their \n"
+"respective authors and are protected by intellectual property and \n"
+"copyright laws applicable to software programs.\n"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Select the memory size of your graphics card"
-msgstr "เลือกขนาดหน่วยความจำของกราฟฟิคการ์ด"
+msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"Your system supports multiple head configuration.\n"
-"What do you want to do?"
+"Linux Virtual Server, used to build a high-performance and highly\n"
+"available server."
 msgstr ""
-"เครื่องของคุณสนับสนุนการคอนฟิกแบบ multihead \n"
-"คุณต้องการทำอะไร?"
 
-#: ../../Xconfig/card.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Multi-head configuration"
-msgstr "Multi-head configuration"
+msgid "4 billion colors (32 bits)"
+msgstr "สี่พันล้านสี (32 บิต)"
 
-#: ../../Xconfig/card.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Choose an X server"
-msgstr "เลือก X เซิร์ฟเวอร์"
+msgid "Micronesia"
+msgstr "Macedonian"
 
-#: ../../Xconfig/card.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "X server"
-msgstr "X เซิร์ฟเวอร์"
+msgid "License"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "64 MB or more"
-msgstr "64 MB หรือมากกว่า"
+msgid "This may take a moment to generate the keys."
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "32 MB"
-msgstr "32 MB"
+msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "16 MB"
-msgstr "16 MB"
+msgid "Sagem (using pppoa) usb"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "8 MB"
-msgstr "8 MB"
+msgid ""
+"An error occurred - no valid devices were found on which to create new "
+"filesystems. Please check your hardware for the cause of this problem"
+msgstr ""
+"เกิดข้อผิดพลาดขึ้น - ไม่พบอุปกรณ์ที่ถูกต้องเพื่อจะสร้างระบบไฟล์ใหม่ "
+"โปรดตรวจสอบฮาร์ดแวร์ของท่านเพื่อแก้ไขปัญหานี้"
 
-#: ../../Xconfig/card.pm:1
-#, c-format
-msgid "4 MB"
-msgstr "4 MB"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting the printing system at boot time"
+msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
 
-#: ../../Xconfig/card.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "2 MB"
-msgstr "2 MB"
+msgid "Do you want to start the connection at boot?"
+msgstr "คุณต้องการต่อตอน boot หรือไม่"
 
-#: ../../Xconfig/card.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "1 MB"
-msgstr "1 MB"
+msgid "Processor ID"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "512 kB"
-msgstr "512 kB"
+msgid "Sound trouble shooting"
+msgstr ""
 
-#: ../../Xconfig/card.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "256 kB"
-msgstr "256 kB"
+msgid "Polish (qwerty layout)"
+msgstr "Polish (qwerty layout)"
 
-#: ../../Xconfig/main.pm:1
+#: ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "activate now"
+msgstr "แอ็คทีฟ"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Keep the changes?\n"
-"The current configuration is:\n"
 "\n"
-"%s"
-msgstr ""
-"เก็บการเปลี่ยนแปลง\n"
-"การปรับแต่งปัจจุบัณคือ:\n"
+"Drakbackup activities via CD:\n"
 "\n"
-"%s"
-
-#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Options"
-msgstr "/Options/ทดลอง"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Test"
+msgid ""
+"You are about to install the printing system %s on a system running in the %"
+"s security level.\n"
+"\n"
+"This printing system runs a daemon (background process) which waits for "
+"print jobs and handles them. This daemon is also accessable by remote "
+"machines through the network and so it is a possible point for attacks. "
+"Therefore only a few selected daemons are started by default in this "
+"security level.\n"
+"\n"
+"Do you really want to configure printing on this machine?"
 msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Resolution"
-msgstr "ขนาดจอภาพ"
+msgid "Host \"%s\", port %s"
+msgstr ""
 
-#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Monitor"
-msgstr "จอภาพ"
-
-#: ../../Xconfig/main.pm:1
-#, fuzzy, c-format
-msgid "Graphic Card"
-msgstr "กราฟฟิคการ์ด"
+msgid "This partition can't be used for loopback"
+msgstr "พาร์ติชั่นนี้ไม่สามารถใช้กับ loopback"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Vertical refresh rate"
-msgstr "อัตราการรีเฟรชตามแนวตั้ง"
+msgid "File already exists. Use it?"
+msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Horizontal refresh rate"
-msgstr "อัตราการรีเฟรชตามแนวนอน"
+msgid "received: "
+msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"The two critical parameters are the vertical refresh rate, which is the "
-"rate\n"
-"at which the whole screen is refreshed, and most importantly the horizontal\n"
-"sync rate, which is the rate at which scanlines are displayed.\n"
-"\n"
-"It is VERY IMPORTANT that you do not specify a monitor type with a sync "
-"range\n"
-"that is beyond the capabilities of your monitor: you may damage your "
-"monitor.\n"
-" If in doubt, choose a conservative setting."
+msgid "Right Alt key"
 msgstr ""
-"ขั้นตอนต่อไปนี้จะต้องใส่พารามิเตอร์ที่มีความสำคัญสองตัว ได้แก่อัตราความถี่\n"
-"ของการสแกนภาพตามแนวตั้ง (vertical refresh rate) ซึ่งเป็นความถี่ที่มีการ\n"
-"รีเฟรชจอภาพทั้งจอ และการอัตราสแกนภาพตามแนวนอน ซึ่งเป็นอัตราของการวาดของ\n"
-"เส้นกวาดสิ่งที่สำคัญมากก็คือ คุณจะต้องระบุชนิดของหน้าจอซึ่งอัตราความถี่ที่\n"
-"ไม่เกินความสามารถของจอภาพ ไม่เช่นนั้นอาจเกิดความเสียหายกับจอภาพได้\n"
-"หากไม่แน่ใจโปรดเลือกเซ็ตอัพแบบมาตรฐาน"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgid "the list of alternative drivers for this sound card"
 msgstr ""
 
-#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Gateway"
+msgstr "เกตเวย์"
+
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Vendor"
-msgstr "ยกเลิก"
+msgid "Scanner sharing"
+msgstr "เครื่องพิมพ์"
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Plug'n Play"
+msgid "Tonga"
 msgstr ""
 
-#: ../../Xconfig/monitor.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose a monitor"
-msgstr "เลือกจอภาพ"
+msgid "Tunisia"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Graphics card: %s"
-msgstr "กราฟฟิคการ์ด: %s"
+msgid "Profile: "
+msgstr "Profile: "
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Choose the resolution and the color depth"
-msgstr "เลือกขนาดจอภาพและความละเอียดสี"
+msgid ""
+"Click on a device in the left tree in order to display its information here."
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Resolutions"
-msgstr "ความละเอียด"
+msgid "XawTV isn't installed!"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "4 billion colors (32 bits)"
-msgstr "สี่พันล้านสี (32 บิต)"
+msgid ""
+"Create/Transfer\n"
+"backup keys for SSH"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "16 million colors (24 bits)"
-msgstr "สิบหกล้านสี (24 บิต)"
+msgid "Do not include critical files (passwd, group, fstab)"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "65 thousand colors (16 bits)"
-msgstr "หกหมื่นห้าพันสี (16 บิต)"
+msgid "old static device name used in dev package"
+msgstr ""
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "32 thousand colors (15 bits)"
-msgstr "สามหมื่นสองพันสี (15 บิต)"
+msgid "This label is already used"
+msgstr "หัวข้อนี้ถูกใช้ไปเรียบร้อยแล้ว"
 
-#: ../../Xconfig/resolution_and_depth.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "256 colors (8 bits)"
-msgstr "256 สี (8 บิต)"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer or connected directly to the network.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected. Also "
+"your network printer(s) must be connected and turned on.\n"
+"\n"
+"Note that auto-detecting printers on the network takes longer than the auto-"
+"detection of only the printers connected to this machine. So turn off the "
+"auto-detection of network printers when you don't need it.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
+msgstr ""
 
-#: ../../Xconfig/test.pm:1
-#, fuzzy, c-format
-msgid "Is this the correct setting?"
-msgstr "ถูกต้องหรือไม่?"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After formatting partition %s, all data on this partition will be lost"
+msgstr "หลังจาก format พาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Leaving in %d seconds"
-msgstr "%d วินาที"
+msgid "Connection Time: "
+msgstr "ชนิดการเชื่อมต่อ"
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "select perm file to see/edit"
+msgstr ""
+
+#: ../../standalone/livedrake:1
 #, c-format
 msgid ""
-"An error occurred:\n"
-"%s\n"
-"Try to change some parameters"
+"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
+"If you don't have it, press Cancel to avoid live upgrade."
 msgstr ""
 
-#: ../../Xconfig/test.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Warning: testing this graphic card may freeze your computer"
-msgstr "ระวัง การทดสอบการ์ดแสดงผลอาจทำให้คอมพิวเตอร์หยุดการทำงาน"
+msgid "Use group id for execution"
+msgstr "ใช้ auto detection"
 
-#: ../../Xconfig/test.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Do you want to test the configuration?"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+msgid "Choose the default user:"
+msgstr "เลือกผู้ใช้ default"
 
-#: ../../Xconfig/test.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Test of the configuration"
-msgstr "ทดสอบการคอนฟิก"
+msgid "Gabon"
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "What norm is your TV using?"
-msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
-
-#: ../../Xconfig/various.pm:1
-#, c-format
 msgid ""
-"Your graphic card seems to have a TV-OUT connector.\n"
-"It can be configured to work using frame-buffer.\n"
 "\n"
-"For this you have to plug your graphic card to your TV before booting your "
-"computer.\n"
-"Then choose the \"TVout\" entry in the bootloader\n"
-"\n"
-"Do you have this feature?"
+"Printers on remote CUPS servers do not need to be configured here; these "
+"printers will be automatically detected."
 msgstr ""
+"เวลาใช้ CUPS SERVER คุณไม่จำเป็นต้องปรับแต่งเครื่องพิมพ์\n"
+"ในตอนนี้  เครื่องพิมพ์จะถูกค้นหาเอง\n"
+"กรณีมีข้อสงสัย กรุณาเลือก \"Remote CUPS server\""
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"I can setup your computer to automatically start the graphical interface "
-"(XFree) upon booting.\n"
-"Would you like XFree to start when you reboot?"
-msgstr ""
-"โปรแกรมจะกำหนดให้คอมพิวเตอร์ของคุณใช้งานแบบกราฟฟิคเมื่อเริ่มบูต\n"
-"คุณต้องการจะให้ทำงานแบบกราฟฟิคเมื่อรีบูตหรือไม่?"
+"Mandrake Linux can support multiple languages. Select\n"
+"the languages you would like to install. They will be available\n"
+"when your installation is complete and you restart your system."
+msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Graphical interface at startup"
-msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, fuzzy, c-format
+msgid "Domain"
+msgstr "โดเมน NIS"
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "XFree86 driver: %s\n"
-msgstr "ไดร์เวอร์ XFree86: %s\n"
+msgid "Precise RAM size if needed (found %d MB)"
+msgstr "กำหนดค่าหน่วยความจำ (RAM) ให้ถูกต้องถ้าต้องการ (ระบบพบ %d MB)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "XFree86 server: %s\n"
-msgstr "เซิร์ฟเวอร์ XFree86: %s\n"
+msgid ""
+"LILO and grub are GNU/Linux bootloaders. Normally, this stage is totally\n"
+"automated. DrakX will analyze the disk boot sector and act according to\n"
+"what it finds there:\n"
+"\n"
+" * if a Windows boot sector is found, it will replace it with a grub/LILO\n"
+"boot sector. This way you will be able to load either GNU/Linux or another\n"
+"OS.\n"
+"\n"
+" * if a grub or LILO boot sector is found, it will replace it with a new\n"
+"one.\n"
+"\n"
+"If it cannot make a determination, DrakX will ask you where to place the\n"
+"bootloader."
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Resolution: %s\n"
-msgstr "ความละเอียดของภาพ %s\n"
+msgid "Provider dns 2 (optional)"
+msgstr "ผู้ให้บริการ dns 2 (optional)"
 
-#: ../../Xconfig/various.pm:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Color depth: %s\n"
-msgstr "อความละเอียดสี: %s\n"
+msgid "Boot device"
+msgstr "อุปกรณ์บูต"
 
-#: ../../Xconfig/various.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Graphics memory: %s kB\n"
-msgstr "ขนาดหน่วยความจำของกราฟฟิคการ์ด: %s kB\n"
+msgid "Which partition do you want to resize?"
+msgstr "พาร์ติชั่นไหนที่คุณต้องการเปลี่ยนขนาด"
 
-#: ../../Xconfig/various.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Graphics card: %s\n"
-msgstr "กราฟฟิคการ์ด: %s\n"
+msgid "United States Minor Outlying Islands"
+msgstr ""
 
-#: ../../Xconfig/various.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Monitor VertRefresh: %s\n"
-msgstr "อัตราความถี่กวาดตามแนวตั้ง: %s\n"
+msgid "A tool to monitor your logs"
+msgstr "อุปกรณ์ตรวจสอบ logs"
 
-#: ../../Xconfig/various.pm:1
-#, c-format
-msgid "Monitor HorizSync: %s\n"
-msgstr "อัตราความถี่กวาดตามแนวนอน: %s\n"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Djibouti"
+msgstr "เลิก"
 
-#: ../../Xconfig/various.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Monitor: %s\n"
-msgstr "จอภาพ: %s\n"
+msgid "detected on port %s"
+msgstr "ค้นหาเจอบน port %s"
 
-#: ../../Xconfig/various.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Mouse device: %s\n"
-msgstr "ดีไวซ์ของเม้าส์: %s\n"
+msgid "LPD"
+msgstr ""
 
 #: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Mouse type: %s\n"
-msgstr "เลือกชนิดของเม้าส์: %s\n"
+msgid "Graphics card: %s\n"
+msgstr "กราฟฟิคการ์ด: %s\n"
 
-#: ../../Xconfig/various.pm:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "Keyboard layout: %s\n"
-msgstr "เลือกชนิดของคีย์บอร์ด: %s\n"
+msgid "Yaboot"
+msgstr "Yaboot"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Options: %s"
-msgstr "พาร์ติชั่น %s"
-
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mount point: "
-msgstr "จุดเม้าท์: "
+msgid "Please check if you are using a DVDRAM device"
+msgstr "โปรดเลือกพาร์ติชั่น"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "Server: "
-msgstr "เซิร์ฟเวอร์"
+msgid "Splash selection"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "The URL must begin with http:// or https://"
-msgstr ""
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "Please enter the WebDAV server URL"
-msgstr "กรุณาทดสอบเม้าส์"
+msgid "Extended partition not supported on this platform"
+msgstr "Extended partition not supported on this platform"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Mount point"
-msgstr "กำหนดจุดเม้าท์"
+msgid "ISDN Configuration"
+msgstr "การคอนฟิก ISDN"
 
-#: ../../diskdrake/dav.pm:1
-#, c-format
-msgid "Server"
-msgstr "เซิร์ฟเวอร์"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "high"
+msgstr "สูง"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Mount"
-msgstr "เม้าท์"
+msgid "Internet Connection Sharing"
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
 
-#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Unmount"
-msgstr "เลิกเม้าท์์ระบบไฟล์"
-
-#: ../../diskdrake/dav.pm:1
-#, fuzzy, c-format
-msgid "New"
-msgstr "ใหม่"
+msgid "Choose file"
+msgstr "เลือก file"
 
-#: ../../diskdrake/dav.pm:1
+#: ../../network/shorewall.pm:1
 #, c-format
 msgid ""
-"WebDAV is a protocol that allows you to mount a web server's directory\n"
-"locally, and treat it like a local filesystem (provided the web server is\n"
-"configured as a WebDAV server). If you would like to add WebDAV mount\n"
-"points, select \"New\"."
+"Warning! An existing firewalling configuration has been detected. You may "
+"need some manual fixes after installation."
 msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Use ``%s'' instead"
-msgstr "ใช้ ``%s'' แทน"
-
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#: ../../diskdrake/removable.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Type"
-msgstr "ประเภท"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Photo Card Access on \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Use ``Unmount'' first"
-msgstr "ใช้ ``Unmount'' ก่อน"
+msgid ""
+"Do you want to enable printing on the printers mentioned above or on "
+"printers in the local network?\n"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Delete"
-msgstr "ลบ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer default settings"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Create"
-msgstr "สร้าง"
+msgid "Generic PS2 Wheel Mouse"
+msgstr "Generic PS2 Wheel Mouse"
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, c-format
-msgid "Filesystem types:"
-msgstr "ประเภทของระบบไฟล์:"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Removing old printer \"%s\"..."
+msgstr "อ่าน CUPS drivers database..."
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Empty"
-msgstr "ว่าง"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Select a device !"
+msgstr "เลือกกราฟฟิคการ์ด"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Windows"
-msgstr "โดเมน NIS"
+msgid "Remove selected server"
+msgstr "ลบคิว"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "HFS"
-msgstr "HFS"
+msgid "French Southern Territories"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "SunOS"
-msgstr "SunOS"
+msgid "the vendor name of the processor"
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Swap"
-msgstr "สวอป"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "Journalised FS"
-msgstr "การเม้าท์ล้มเหลว"
+msgid "All data on this partition should be backed-up"
+msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นนี้ควรจะทำการสำรองไว้"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Ext2"
-msgstr "Ext2"
-
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
-msgid "No hard drives found"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Installing package %s"
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please click on a partition"
-msgstr "โปรดเลือกพาร์ติชั่น"
+msgid "Checking device and configuring HPOJ..."
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
-#, fuzzy, c-format
+#: ../../diskdrake/interactive.pm:1
+#, c-format
 msgid ""
-"You have one big MicroSoft Windows partition.\n"
-"I suggest you first resize that partition\n"
-"(click on it, then click on \"Resize\")"
+"To have more partitions, please delete one to be able to create an extended "
+"partition"
 msgstr ""
-"ถ้าคุณมี พาร์ติชั่น FAT ที่ใหญ่ พาร์ติชั่น เดียว\n"
-"(ซึ่งโดยปกติ Microsoft Dos/Windows ใข้)\n"
-"ผมแนะนำให้คุณปรับขนาด พาร์ติชั่น เสียก่อน\n"
-"(กดที่มันแล้วกด \"ปรับขนาด\")"
+"หากต้องการเพิ่มพาร์ติชั่น โปรดลบพาร์ติชั่นทิ้งหนึ่งพาร์ติชั่นเพื่อสร้าง\n"
+"พาร์ติชั่นแบบ extended ได้"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Choose action"
-msgstr "เลือกกิจกรรม"
+msgid ""
+"Your printer was configured automatically to give you access to the photo "
+"card drives from your PC. Now you can access your photo cards using the "
+"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
+"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
+"\"man mtools\" on the command line for more info). You find the card's file "
+"system under the drive letter \"p:\", or subsequent drive letters when you "
+"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
+"can switch between drive letters with the field at the upper-right corners "
+"of the file lists."
+msgstr ""
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Wizard"
-msgstr "Wizard"
+msgid "Choose packages to install"
+msgstr "เลือกแพ็คเก็จ"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
-"enough)\n"
-"at the beginning of the disk"
+"\n"
+" Some errors during sendmail are caused by \n"
+" a bad configuration of postfix. To solve it you have to\n"
+" set myhostname or mydomain in /etc/postfix/main.cf\n"
+"\n"
 msgstr ""
-"ถ้าคุณต้องการใช้ aboot ควรระวังว่าต้องมีที่ว่าง (2048 sectors) \n"
-"ด้านหน้าของ disk"
 
-#: ../../diskdrake/hd_gtk.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Please make a backup of your data first"
-msgstr "กรุณาทำ backup ก่อน"
+msgid "ALL existing partitions and their data will be lost on drive %s"
+msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นทั้งหมดจะสูญหายไป %s"
 
-#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Read carefully!"
-msgstr "โปรดอ่านอย่างถี่ถ้วน!"
+msgid ""
+"Your system does not have enough space left for installation or upgrade (%d "
+"> %d)"
+msgstr "เครื่องของคุณไม่มีเนื้อที่เพียงพอในการติดตั้งหรือ upgrade (%d > %d)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Encryption key (again)"
+msgid ""
+"Every printer needs a name (for example \"printer\"). The Description and "
+"Location fields do not need to be filled in. They are comments for the users."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Encryption key"
+msgid ""
+"\"%s\": clicking on the \"%s\" button will open the printer configuration\n"
+"wizard. Consult the corresponding chapter of the ``Starter Guide'' for more\n"
+"information on how to setup a new printer. The interface presented there is\n"
+"similar to the one used during installation."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "The encryption keys do not match"
-msgstr "รหัสผ่านไม่เหมือนกัน"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "This encryption key is too simple (must be at least %d characters long)"
-msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose your filesystem encryption key"
+msgid "Bhutan"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Filesystem encryption key"
-msgstr "ประเภทของระบบไฟล์: "
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Type: "
-msgstr "ประเภท: "
+msgid "Network interface"
+msgstr "Network interface"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "on channel %d id %d\n"
-msgstr "บนบัส %d id %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Partition table type: %s\n"
-msgstr "ชนิดตารางพาร์ติชั่น: %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "LVM-disks %s\n"
-msgstr "LVM-disks %s\n"
+msgid "Reading printer data..."
+msgstr "อ่าน CUPS drivers database..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Info: "
-msgstr "ข้อมูล: "
+msgid "Korean keyboard"
+msgstr "Korean keyboard"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Geometry: %s cylinders, %s heads, %s sectors\n"
-msgstr "ข้อมูลทางกายภาพ: %s ไซลินเดอร์, %s หัวอ่าน, %s เซ้กเตอร์\n"
+msgid "Not connected"
+msgstr "ไม่เชื่อมต่อ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Size: %s\n"
-msgstr "ขนาด: %s\n"
+msgid "Greek"
+msgstr "กรีก"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Read-only"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
+"\\fP = NONE no issues are\n"
+"allowed else only /etc/issue is allowed."
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Device: "
-msgstr "อุปกรณ์: "
+msgid "Saint Kitts and Nevis"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"Transfer successful\n"
+"You may want to verify you can login to the server with:\n"
 "\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-msgstr ""
-"\n"
-"This special Bootstrap\n"
-"partition is for\n"
-"dual-booting your system.\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid ""
+"ssh -i %s %s\\@%s\n"
 "\n"
-"Chances are, this partition is\n"
-"a Driver partition. You should\n"
-"probably leave it alone.\n"
+"without being prompted for a password."
 msgstr ""
-"\n"
-"มีความเป็นไปได้ที่พาร์ติชั่นนี้\n"
-"เป็นพาร์ติชั่นของไดรเวอร์ คุณควรที่จะ\n"
-"ปล่อยมันทิ้งไว้แบบนี้\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Loopback file name: %s"
-msgstr "Loopback file name: %s"
+msgid "Enable OF Boot?"
+msgstr "Enable OF Boot?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "RAID-disks %s\n"
-msgstr "ดิสก์แบบ RAID %s\n"
+msgid "You can't use JFS for partitions smaller than 16MB"
+msgstr "คุณไม่สามารถใช้ JFS สำหรับพาร์ติชั่นที่น้อยกว่า 16MB ได้"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Chunk size %s\n"
-msgstr "ขนาดของ Chunk %s\n"
+msgid "Monitor VertRefresh: %s\n"
+msgstr "อัตราความถี่กวาดตามแนวตั้ง: %s\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Level %s\n"
-msgstr "ระดับ %s\n"
+msgid "path"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/removable.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Mount point"
+msgstr "กำหนดจุดเม้าท์"
+
+#: ../../Xconfig/test.pm:1
 #, c-format
 msgid ""
-"Partition booted by default\n"
-"    (for MS-DOS boot, not for lilo)\n"
+"An error occurred:\n"
+"%s\n"
+"Try to change some parameters"
 msgstr ""
-"พาร์ติชั่นที่กำหนดให้บูตซึ่งกำหนดไว้แล้ว\n"
-"    (สำหรับบูตของ MS-DOS ไม่ใช่ lilo)\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"Loopback file(s):\n"
-"   %s\n"
-msgstr "Loopback file(s): %s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "RAID md%s\n"
-msgstr "RAID md%s\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Mounted\n"
-msgstr "เม้าท์\n"
+msgid "Restore system"
+msgstr "ติดตั้งระบบ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Not formatted\n"
-msgstr "ยังไม่ได้ฟอร์แมต\n"
+msgid ""
+"These are the machines on which the locally connected scanner(s) should be "
+"available:"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Formatted\n"
-msgstr "ฟอร์แมต\n"
+msgid "The DHCP end ip"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid "Cylinder %d to %d\n"
-msgstr "ไซลินเดอร์ %d เป็น ไซลินเดอร์ %d\n"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid ", %s sectors"
-msgstr ", %s เซ็กเตอร์"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Size: %s"
-msgstr "ขนาด: %s"
+msgid "Another one"
+msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Start: sector %s\n"
-msgstr "เริ่มต้น: เซ็กเตอร์ %s\n"
+msgid "Drakbackup"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Name: "
-msgstr "ชื่อ: "
+msgid "Colombia"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "DOS drive letter: %s (just a guess)\n"
-msgstr "อักษรไดรว์แบบดอส: %s (เป็นการคาดเดา)\n"
+msgid ""
+"Current configuration of `%s':\n"
+"\n"
+"Network: %s\n"
+"IP address: %s\n"
+"IP attribution: %s\n"
+"Driver: %s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "partition %s is now known as %s"
+msgid "Plug'n Play"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Removing %s"
-msgstr "ความละเอียดของภาพ %s\n"
+msgid "Reunion"
+msgstr "ขนาดจอภาพ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Copying %s"
-msgstr ""
+msgid "Details"
+msgstr "รายละเอียด"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "Moving files to the new partition"
-msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
+msgid "For security reasons, it will be disconnected now."
+msgstr "เพื่อความปลอดภัย มันจะหยุดการติดต่อเดี๋ยวนี้"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"Directory %s already contains data\n"
-"(%s)"
+msgid "Synchronization tool"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Hide files"
-msgstr "mkraid failed"
+msgid "Checking your system..."
+msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Move files to the new partition"
-msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
+msgid "Print"
+msgstr "เครื่องพิมพ์"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "After formatting partition %s, all data on this partition will be lost"
-msgstr "หลังจาก format พาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
+msgid ""
+"Insert the tape with volume label %s\n"
+" in the tape drive device %s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "You'll need to reboot before the modification can take place"
-msgstr "คุณจะต้องทำการรีบูตระบบก่อนที่จะทำการแก้ไข"
+msgid "Mongolia"
+msgstr ""
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Partition table of drive %s is going to be written to disk!"
-msgstr "ตารางพาร์ติชั่นของไดรฟ์ %s จะถูกบันทึกลงไปในดิสก์"
+msgid "Mounted\n"
+msgstr "เม้าท์\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "The package %s is needed. Install it?"
-msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "What type of partitioning?"
-msgstr "การทำ partitioning ชนิดใด?"
+msgid "Graphical Interface"
+msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Be careful: this operation is dangerous."
-msgstr "ระวัง การทำงานนี้อันตราย"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Users"
+msgstr "เรียกคืนจากไฟล์"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "chunk size"
-msgstr "ขนาดของ chunk"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Encryption key for %s"
+msgstr "รหัสผ่านไม่เหมือนกัน"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "level"
-msgstr "ระดับ"
+msgid ""
+"The portmapper manages RPC connections, which are used by\n"
+"protocols such as NFS and NIS. The portmap server must be running on "
+"machines\n"
+"which act as servers for protocols which make use of the RPC mechanism."
+msgstr ""
+"Portmapper บริหารการติดต่อของ RPC ซึ่งใช้กับ\n"
+"protocols เช่น NFS และ NIS Portmap server ต้องทำงานบนเครื่อง\n"
+"ที่ทำหน้าที่เป็น server ของ protocal ซึ่งเรียกใช้การทำงานแบบ RPC"
 
-#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
-#, c-format
-msgid "device"
-msgstr "อุปกรณ์"
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detected hardware"
+msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Various"
+msgid "Mauritius"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Mount options"
-msgstr "อ๊อปชั่นของโมดูล:"
-
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "File already exists. Use it?"
-msgstr "ไฟล์มีอยู่แล้ว ต้องการใช้?"
+msgid "Myanmar (Burmese)"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
 #, fuzzy, c-format
-msgid "File is already used by another loopback, choose another one"
-msgstr "File already used by another loopback, choose another one"
+msgid "Enabling swap partition %s"
+msgstr "ฟอร์แมตพาร์ติชั่น %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Give a file name"
-msgstr "ชื่อเต็ม"
+msgid "There is no FAT partition to use as loopback (or not enough space left)"
+msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Filesystem type: "
-msgstr "ประเภทของระบบไฟล์: "
+msgid "Armenian (old)"
+msgstr "อาร์เมเนียน (เก่า)"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Size in MB: "
-msgstr "ขนาดเป็น MB: "
+msgid ""
+"A printer named \"%s\" already exists under %s. \n"
+"Click \"Transfer\" to overwrite it.\n"
+"You can also type a new name or skip this printer."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, c-format
-msgid "Loopback file name: "
-msgstr "ชื่อ Loopback file: "
+msgid ""
+"Find the solutions of your problems via MandrakeSoft's online support "
+"platform."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Loopback"
-msgstr "Loopback"
+msgid ", host \"%s\", port %s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "This partition can't be used for loopback"
-msgstr "พาร์ติชั่นนี้ไม่สามารถใช้กับ loopback"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Monaco"
+msgstr "จอภาพ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../fs.pm:1
 #, c-format
-msgid "LVM name?"
-msgstr "ชื่อ LVM"
+msgid "%s formatting of %s failed"
+msgstr "กำลังฟอร์แมต %s ของ %s ที่มีปัญหา"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "new"
-msgstr "ใหม่"
+msgid "Partitioning failed: %s"
+msgstr "การทำพาร์ติชั่นล้มเหลว: %s"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "Canada (cable)"
+msgstr "คานาดา (ควิเบค)"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Upgrade"
+msgstr "Update"
+
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Workstation"
+msgstr "Workstation ที่ทำงาน"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Choose an existing LVM to add to"
-msgstr "เลือก LVM ที่มีอยู่เพื่อเพิ่มเข้าไป"
+msgid ""
+"Installing package %s\n"
+"%d%%"
+msgstr ""
+"กำลังติดตั้งแพ็คเก็จ %s\n"
+"%d%%"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Choose an existing RAID to add to"
-msgstr "เลือก RAID เพื่อเพิ่มเข้าไป"
+msgid "Kyrgyzstan"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "With basic documentation"
+msgstr "ตำแหน่ง"
+
+#: ../../services.pm:1
 #, c-format
-msgid "Moving partition..."
-msgstr "ย้ายพาร์ติชั่น..."
+msgid "Anacron is a periodic command scheduler."
+msgstr "Anacron คือโปรแกรมสำหรับตั้งเวลาทำงาน"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Moving"
-msgstr "ย้าย"
+msgid ""
+"You must have a root partition.\n"
+"For this, create a partition (or click on an existing one).\n"
+"Then choose action ``Mount point'' and set it to `/'"
+msgstr ""
+"คุณต้องมี root พาร์ติชั่น\n"
+"เพราะฉนั้นคุณต้องสร้าง พาร์ติชั่น (หรือกดเลือกอันที่มีอยู่)\n"
+"หลังจากนั้นเลือก ``Mount Point'' และจัดให้มันเป็น `/'"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Which sector do you want to move it to?"
-msgstr "คุณต้องการย้ายไปเซ็กเตอร์ไหน"
+msgid "Proxy should be http://..."
+msgstr "ค่าของ Proxy ควรจะเป็น http://..."
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, c-format
-msgid "Sector"
-msgstr "เซ็กเตอร์"
+msgid "South Africa"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which disk do you want to move it to?"
-msgstr "คุณต้องการจะย้ายไปดิสก์ไหน"
+msgid "Western Sahara"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Move"
-msgstr "ย้าย"
+msgid "Etherboot Floppy/ISO"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "New size in MB: "
-msgstr "ขนาดเป็น MB: "
+msgid "Modify printer configuration"
+msgstr "การคอนฟิก Internet"
 
 #: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a partition"
+msgstr "เลือกกิจกรรม"
+
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Choose the new size"
-msgstr "เลือกขนาดใหม่"
+msgid "Edit current rule"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Resize"
-msgstr "เปลี่ยนขนาด"
+msgid "%s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "After resizing partition %s, all data on this partition will be lost"
-msgstr "หลังจากเปลี่ยนขนาดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะหายไป"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable the logging of IPv4 strange packets."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "All data on this partition should be backed-up"
-msgstr "ข้อมูลทั้งหมดในพาร์ติชั่นนี้ควรจะทำการสำรองไว้"
+msgid "Please test the mouse"
+msgstr "กรุณาทดสอบเม้าส์"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Other Media"
+msgstr "อื่นๆ"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup system files"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid "This partition is not resizeable"
-msgstr "พาร์ติชั่นนี้ไม่สามารถเปลี่ยนขนาดได้"
+msgid "Logitech MouseMan+"
+msgstr "Logitech MouseMan+"
 
 #: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Computing FAT filesystem bounds"
-msgstr "คำนวณขอบเขตของระบบไฟล์"
+msgid "Sector"
+msgstr "เซ็กเตอร์"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Where do you want to mount %s?"
-msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
+msgid "Qatar"
+msgstr "สถานะ:"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
+msgid "LDAP Base dn"
 msgstr ""
-"Can't unset mount point as this partition is used for loop back.\n"
-"Remove the loopback first"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Where do you want to mount device %s?"
-msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
+msgid ""
+"You can't select this package as there is not enough space left to install it"
+msgstr "คุณไม่สามารถเลือก package นี้เนื่องจากคุณมีพื้นที่ไม่เพียงพอ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Where do you want to mount the loopback file %s?"
-msgstr "คุณต้องการเม้าท์ loopback file %s ไว้ที่ใด?"
+msgid "generate auto-install floppy"
+msgstr "สร้างfloppyสำหรับการติดตั้งแบบออโตเมติก"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Switching from ext2 to ext3"
-msgstr ""
+msgid "Dialing mode"
+msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"
 
-#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Which filesystem do you want?"
-msgstr "คุณต้องการเลือก filesystem ใด"
+msgid "File sharing"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Change partition type"
-msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+msgid "Clean /tmp at each boot"
+msgstr "ลบ /tmp ตอน boot ทุกครั้ง"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"After changing type of partition %s, all data on this partition will be lost"
-msgstr "การเปลี่ยนชนิดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
+msgid "Malawi"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Remove the loopback file?"
-msgstr "ฟอร์แมต loopback file %s"
+msgid "Please choose your type of mouse."
+msgstr "คุณมีเม้าส์ชนิดใด"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"You can't create a new partition\n"
-"(since you reached the maximal number of primary partitions).\n"
-"First remove a primary partition and create an extended partition."
+msgid "class of hardware device"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Preference: "
-msgstr "ข้อกำหนด: "
+msgid ""
+"These are the machines and networks on which the locally connected printer"
+"(s) should be available:"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid "Start sector: "
-msgstr "เริ่มเซ็กเตอร์: "
+msgid "United Kingdom"
+msgstr "อังกฤษ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Create a new partition"
-msgstr "สร้างพาร์ติชั่นใหม่"
+msgid "running"
+msgstr "กำลังทำงาน"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Use for loopback"
-msgstr "ใช้สำหรับ loopback"
+msgid "default"
+msgstr "default"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Modify RAID"
-msgstr "แก้ไข RAID"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Indonesia"
+msgstr "ไม่มี"
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Remove from LVM"
-msgstr "ลบออกจาก LVM"
+#: ../../standalone/drakxtv:1
+#, fuzzy, c-format
+msgid "France [SECAM]"
+msgstr "ฝรั่งเศษ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Remove from RAID"
-msgstr "ลบออกจาก RAID"
+msgid "restrict"
+msgstr "จำเพาะ"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "Add to LVM"
-msgstr "เพิ่มให้ LVM"
+msgid "must have"
+msgstr "ต้องมี"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Add to RAID"
-msgstr "เพิ่มให้ RAID"
+msgid ""
+"CUPS does not support printers on Novell servers or printers sending the "
+"data into a free-formed command.\n"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Format"
-msgstr "ฟอร์แมต"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Senegal"
+msgstr "enable"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Detailed information"
-msgstr "แสดงข้อมูล"
+msgid "Command line"
+msgstr "ชื่อโดเมน"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/08-store.pl:1
 #, c-format
-msgid "Trying to rescue partition table"
-msgstr "กำลังพยายามกู้ตารางพาร์ติชั่นคืน"
+msgid ""
+"Our full range of Linux solutions, as well as special offers on products and "
+"other \"goodies\", are available on our e-store:"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Insert a floppy in drive\n"
-"All data on this floppy will be lost"
+msgid "access to administrative files"
 msgstr ""
-"กรุณาใส่แผ่นฟล้อปปี้ในไดรว์\n"
-"ข้อมูลทั้งหมดบนแผ่นฟล้อปปี้จะถูกลบ"
 
-#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Warning"
-msgstr "คำเตือน"
+msgid ""
+"Error during sendmail.\n"
+"  Your report mail was not sent.\n"
+"  Please configure sendmail"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Select file"
-msgstr "เลือกไฟล์"
+msgid ", multi-function device on parallel port \\#%s"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"The backup partition table has not the same size\n"
-"Still continue?"
+"Arguments: (val)\n"
+"\n"
+"Set the shell timeout. A value of zero means no timeout."
 msgstr ""
-"พาร์ติชั่นแบ็คอัพไม่มีขนาดเท่ากัน\n"
-"ต้องการทำต่อหรือไม่?"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Montserrat"
+msgstr "พอร์ตของเม้าส์"
+
+#: ../../help.pm:1
 #, c-format
-msgid "Removable media automounting"
+msgid "Automatic dependencies"
 msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Swap"
+msgstr "สวอป"
+
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Reload partition table"
-msgstr "กู้ตารางพาร์ติชั่น"
+msgid "Connecting to the Internet "
+msgstr "ต่อเข้า Internet "
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore Other"
+msgstr "เรียกคืนจากไฟล์"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Rescue partition table"
-msgstr "กู้ตารางพาร์ติชั่น"
+msgid "TV card"
+msgstr "TV card"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Restore partition table"
-msgstr "กู้ตารางพาร์ติชั่น"
+msgid "Printer on SMB/Windows 95/98/NT server"
+msgstr "SMB/วินโดวส์ 95/98/NT"
 
-#: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Save partition table"
-msgstr "บันทึกตารางพาร์ติชั่น"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid ", "
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"To have more partitions, please delete one to be able to create an extended "
-"partition"
+"Arguments: (umask)\n"
+"\n"
+"Set the root umask."
 msgstr ""
-"หากต้องการเพิ่มพาร์ติชั่น โปรดลบพาร์ติชั่นทิ้งหนึ่งพาร์ติชั่นเพื่อสร้าง\n"
-"พาร์ติชั่นแบบ extended ได้"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove selected host/network"
+msgstr "ลบคิว"
+
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid ""
+"Postfix is a Mail Transport Agent, which is the program that moves mail from "
+"one machine to another."
+msgstr ""
+"Postfix เป็นโปรแกรมทำหน้าที่ส่งจดหมายจากเครื่องหนึ่ง\n"
+"ไปอีกเครื่องหนึ่ง"
+
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "I can't add any more partition"
-msgstr "โปรแกรมไม่สามารถเพิ่มพาร์ติชั่นได้อีก"
+msgid "Disconnection from the Internet failed."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "All primary partitions are used"
-msgstr "พาร์ติชั่นแบบ primary ถูกใช้ทั้งหมดแล้ว"
+msgid ""
+"Here you can choose the key or key combination that will \n"
+"allow switching between the different keyboard layouts\n"
+"(eg: latin and non latin)"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Hard drive information"
-msgstr "การตรวจหาฮาร์ดไดรว์"
+msgid "Network Hotplugging"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Auto allocate"
-msgstr "กำหนดแบบอัตโนมัติ"
+msgid "if set to yes, reports check result to tty."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
-#, c-format
-msgid "Clear all"
-msgstr "ล้างทั้งหมด"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore From CD"
+msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Do you want to save /etc/fstab modifications"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+msgid ""
+"You are about to configure your computer to share its Internet connection.\n"
+"With that feature, other computers on your local network will be able to use "
+"this computer's Internet connection.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
+"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
+"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
+"\n"
+"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../network/ethernet.pm:1
 #, c-format
-msgid "Quit without writing the partition table?"
-msgstr "ออกโดยไม่ต้องเขียนตารางพาร์ติชั่น"
+msgid ""
+"Please choose which network adapter you want to use to connect to Internet."
+msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Quit without saving"
-msgstr "ออกโดยไม่ต้องบันทึก"
+msgid "Photo memory card access on your HP multi-function device"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Continue anyway?"
-msgstr "ทำงานต่อหรือไม่?"
+msgid ""
+"Enhance your computer performance with the help of a selection of partners "
+"offering professional solutions compatible with Mandrake Linux"
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Toggle to expert mode"
-msgstr "ปกติ > สำหรับผู้ชำนาญ"
+msgid "Internet Connection Sharing is now disabled."
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Toggle to normal mode"
-msgstr "สำหรับผู้ชำนาญ > ปกติ"
+msgid "if set to yes, verify checksum of the suid/sgid files."
+msgstr ""
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Undo"
-msgstr "ยกเลิก"
+msgid "Latin American"
+msgstr "ละตินอเมริกา"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Exit"
-msgstr "Ext2"
+msgid "Japanese text printing mode"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../diskdrake/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Choose a partition"
-msgstr "เลือกกิจกรรม"
+msgid "Old device file"
+msgstr "เลือกไฟล์"
 
 #: ../../diskdrake/interactive.pm:1
-#, fuzzy, c-format
-msgid "Choose another partition"
-msgstr "สร้างพาร์ติชั่นใหม่"
+#, c-format
+msgid "Info: "
+msgstr "ข้อมูล: "
 
-#: ../../diskdrake/removable.pm:1
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "Change type"
-msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+msgid "Button `%s': %s"
+msgstr "พาร์ติชั่น %s"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Search servers"
-msgstr "เซิร์ฟเวอร์ DNS"
+#: ../../interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../standalone/drakxtv:1 ../../standalone/harddrake2:1
+#: ../../standalone/service_harddrake:1
+#, c-format
+msgid "Please wait"
+msgstr "โปรดรอสักครู่"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetMouse"
+msgstr "Genius NetMouse"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Domain"
-msgstr "โดเมน NIS"
+msgid "None"
+msgstr "ทำเรียบร้อยแล้ว"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Username"
-msgstr "ชื่อผู้ใช้"
+msgid "The entered IP is not correct.\n"
+msgstr "ถูกต้องหรือไม่?"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"Please enter your username, password and domain name to access this host."
-msgstr ""
+msgid "Ethernet Card"
+msgstr "Ethernet Card"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Domain Authentication Required"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+#: ../../my_gtk.pm:1 ../../services.pm:1 ../../ugtk2.pm:1
+#, c-format
+msgid "Info"
+msgstr "ข้อมูล"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
-#, fuzzy, c-format
-msgid "Another one"
-msgstr "เฎ?เฏ?เฎฃเฎฏเฎฎเฎ?"
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakbackup:1
+#, c-format
+msgid "Install"
+msgstr "ติดตั้ง"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Which username"
-msgstr "ชื่อผู้ใช้"
+msgid ""
+"Click on \"%s\" if you want to delete all data and partitions present on\n"
+"this hard drive. Be careful, after clicking on \"%s\", you will not be able\n"
+"to recover any data and partitions present on this hard drive, including\n"
+"any Windows data.\n"
+"\n"
+"Click on \"%s\" to stop this operation without losing any data and\n"
+"partitions present on this hard drive."
+msgstr ""
+"กด \"OK\" ถ้าคุณต้องการลบข้อมูลทั้งหมดบน harddisk นี้\n"
+"นี่รวมถึง partitions ทั้งหมดซึ่งรวมถึง Windows ด้วย\n"
+"\n"
+"\n"
+"กด \"ยกเลิก\" เพื่อยกเสิกการทำงานนี้"
 
-#: ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Can't login using username %s (bad password?)"
-msgstr ""
+msgid "Exit install"
+msgstr "ออกจากการติดตั้ง"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "cpu # "
+msgid ""
+"Everything has been configured.\n"
+"You may now share Internet connection with other computers on your Local "
+"Area Network, using automatic network configuration (DHCP)."
 msgstr ""
+"ทุกอย่างได้ถูกทำการปรับแต่งเรียบร้อยแล้ว\n"
+"คุณสามารถใช้อินเตอร์เนตบนคอมพิวเตอร์อื่นๆใน LAN โดยใช้ (DHCP)"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SMBus controllers"
-msgstr ""
+msgid "Remote CUPS server"
+msgstr "Remote CUPS server"
 
-#: ../../harddrake/data.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "USB controllers"
-msgstr ""
+msgid "Sun - Mouse"
+msgstr "Sun - Mouse"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "SCSI controllers"
+msgid ""
+"There is only one configured network adapter on your system:\n"
+"\n"
+"%s\n"
+"\n"
+"I am about to setup your Local Area Network with that adapter."
 msgstr ""
+"ในเครื่องของคุณมี network adapter อันเดียวที่ได้รับการปรับแต่งแล้ว\n"
+"\n"
+"%s\n"
+"\n"
+"ผมกำลังจะใช้ adapter นี้กับระบบ LAN"
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1
+#, fuzzy, c-format
+msgid "Minimal install"
+msgstr "ออกจากการติดตั้ง"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Ethiopia"
+msgstr "Estonian"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Firewire controllers"
+msgid "Devanagari"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "(E)IDE/ATA controllers"
+msgid ""
+"- pci devices: this gives the PCI slot, device and function of this card\n"
+"- eide devices: the device is either a slave or a master device\n"
+"- scsi devices: the scsi bus and the scsi device ids"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Joystick"
-msgstr ""
+msgid "Total size: %d / %d MB"
+msgstr "ขนาดรวม: %d / %d MB "
 
-#: ../../harddrake/data.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Scanner"
-msgstr "เลือกกราฟฟิคการ์ด"
+msgid "disabled"
+msgstr "disable"
 
-#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Unknown/Others"
-msgstr "Generic"
+msgid "Search for new scanners"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Bridges and system controllers"
-msgstr ""
+msgid "Disabling servers..."
+msgstr "ยกเลิกการทำงานของ server"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Modem"
-msgstr "Mouse"
+msgid ""
+"Please choose the time \n"
+"interval between each backup"
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Ethernetcard"
-msgstr "Ethernet Card"
+#: ../../standalone/drakboot:1
+#, c-format
+msgid "Installation of %s failed. The following error occured:"
+msgstr "การติดตั้ง %s ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Processors"
+msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Webcam"
+msgid ""
+"You have selected the following server(s): %s\n"
+"\n"
+"\n"
+"These servers are activated by default. They don't have any known security\n"
+"issues, but some new ones could be found. In that case, you must make sure\n"
+"to upgrade as soon as possible.\n"
+"\n"
+"\n"
+"Do you really want to install these servers?\n"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Soundcard"
-msgstr "Sound card"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Network printer (TCP/Socket)"
+msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Other MultiMedia devices"
-msgstr "อื่นๆ"
+msgid "Backup User files..."
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Tvcard"
-msgstr "TV card"
+#: ../../steps.pm:1
+#, c-format
+msgid "Install system"
+msgstr "ติดตั้งระบบ"
 
-#: ../../harddrake/data.pm:1
-#, fuzzy, c-format
-msgid "Videocard"
-msgstr "โหมดของการแสดงผล"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "First DNS Server (optional)"
+msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"
 
-#: ../../harddrake/data.pm:1 ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Alternatively, you can specify a device name/file name in the input line"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Tape"
-msgstr "ประเภท"
+msgid "dhcpd Config..."
+msgstr "กำลังทำการคอนฟิก"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "DVD-ROM"
+msgid "The setup has already been done, but it's currently disabled."
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "CD/DVD burners"
-msgstr ""
+msgid "LILO/grub Installation"
+msgstr "การติดตั้ง LILO/grub"
 
-#: ../../harddrake/data.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "CDROM"
-msgstr ""
+msgid "Israeli"
+msgstr "อิสราเอล"
 
-#: ../../harddrake/data.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Disk"
-msgstr "เดนมาร์ก"
+msgid "load setting"
+msgstr "ฟอร์แมต"
 
-#: ../../harddrake/data.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on server \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Zip"
+msgid "Floppy can be removed now"
 msgstr ""
 
-#: ../../harddrake/data.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Floppy"
-msgstr "บันทึกลงแผ่นฟล้อปปี้"
+msgid "Truly minimal install"
+msgstr "ออกจากการติดตั้ง"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Let me pick any driver"
+msgid "Denmark"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Moving partition..."
+msgstr "ย้ายพาร์ติชั่น..."
+
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Driver:"
-msgstr "Driver"
+msgid "(This) DHCP Server IP"
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
 
-#: ../../harddrake/sound.pm:1
+#: ../../Xconfig/test.pm:1
 #, c-format
-msgid ""
-"If you really think that you know which driver is the right one for your "
-"card\n"
-"you can pick one in the above list.\n"
-"\n"
-"The current driver for your \"%s\" sound card is \"%s\" "
-msgstr ""
+msgid "Test of the configuration"
+msgstr "ทดสอบการคอนฟิก"
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Choosing an arbitratry driver"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Installing %s ..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
 
-#: ../../harddrake/sound.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"The classic bug sound tester is to run the following commands:\n"
-"\n"
-"\n"
-"- \"lspcidrake -v | fgrep AUDIO\" will tell you which driver your card use\n"
-"by default\n"
-"\n"
-"- \"grep sound-slot /etc/modules.conf\" will tell you what driver it\n"
-"currently uses\n"
+"If you told the installer that you wanted to individually select packages,\n"
+"it will present a tree containing all packages classified by groups and\n"
+"subgroups. While browsing the tree, you can select entire groups,\n"
+"subgroups, or individual packages.\n"
 "\n"
-"- \"/sbin/lsmod\" will enable you to check if its module (driver) is\n"
-"loaded or not\n"
+"Whenever you select a package on the tree, a description appears on the\n"
+"right to let you know the purpose of the package.\n"
 "\n"
-"- \"/sbin/chkconfig --list sound\" and \"/sbin/chkconfig --list alsa\" will\n"
-"tell you if sound and alsa services're configured to be run on\n"
-"initlevel 3\n"
+"!! If a server package has been selected, either because you specifically\n"
+"chose the individual package or because it was part of a group of packages,\n"
+"you will be asked to confirm that you really want those servers to be\n"
+"installed. By default Mandrake Linux will automatically start any installed\n"
+"services at boot time. Even if they are safe and have no known issues at\n"
+"the time the distribution was shipped, it is entirely possible that that\n"
+"security holes were discovered after this version of Mandrake Linux was\n"
+"finalized. If you do not know what a particular service is supposed to do\n"
+"or why it is being installed, then click \"%s\". Clicking \"%s\" will\n"
+"install the listed services and they will be started automatically by\n"
+"default during boot. !!\n"
 "\n"
-"- \"aumix -q\" will tell you if the sound volume is muted or not\n"
+"The \"%s\" option is used to disable the warning dialog which appears\n"
+"whenever the installer automatically selects a package to resolve a\n"
+"dependency issue. Some packages have relationships between each other such\n"
+"that installation of a package requires that some other program is also\n"
+"rerquired to be installed. The installer can determine which packages are\n"
+"required to satisfy a dependency to successfully complete the installation.\n"
 "\n"
-"- \"/sbin/fuser -v /dev/dsp\" will tell which program uses the sound card.\n"
+"The tiny floppy disk icon at the bottom of the list allows you to load a\n"
+"package list created during a previous installation. This is useful if you\n"
+"have a number of machines that you wish to configure identically. Clicking\n"
+"on this icon will ask you to insert a floppy disk previously created at the\n"
+"end of another installation. See the second tip of last step on how to\n"
+"create such a floppy."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Sound trouble shooting"
+msgid "Choose your filesystem encryption key"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Error: The \"%s\" driver for your sound card is unlisted"
+msgid ""
+"Please choose your CD/DVD device\n"
+"(Press Enter to propogate settings to other fields.\n"
+"This field isn't necessary, only a tool to fill in the form.)"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "Unkown driver"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Andorra"
+msgstr "ยกเลิก"
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "There's no known driver for your sound card (%s)"
+msgid "Sierra Leone"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Botswana"
+msgstr "Estonian"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "(default value: %s)"
+msgstr " (Default)"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "No known driver"
+msgid "Alternative test page (Letter)"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"There's no free driver for your sound card (%s), but there's a proprietary "
-"driver at \"%s\"."
+"DHCP Server Configuration.\n"
+"\n"
+"Here you can select different options for the DHCP server configuration.\n"
+"If you don't know the meaning of an option, simply leave it as it is.\n"
+"\n"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No open source driver"
-msgstr ""
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
+msgid "Choose an X server"
+msgstr "เลือก X เซิร์ฟเวอร์"
 
-#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Please Wait... Applying the configuration"
-msgstr "กรุณารอสักครู่ ..."
+msgid "Swap partition size in MB: "
+msgstr "ขนาดพาร์ติชั่น Swapเป็น MB: "
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"The old \"%s\" driver is blacklisted.\n"
-"\n"
-"It has been reported to oops the kernel on unloading.\n"
-"\n"
-"The new \"%s\" driver'll only be used on next bootstrap."
+"Other (not drakbackup)\n"
+"keys in place already"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "No changes to backup!"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Trouble shooting"
-msgstr ""
+msgid "Formatted\n"
+msgstr "ฟอร์แมต\n"
 
-#: ../../harddrake/sound.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"OSS (Open Sound System) was the first sound API. It's an OS independant "
-"sound API (it's available on most unices systems) but it's a very basic and "
-"limited API.\n"
-"What's more, OSS drivers all reinvent the wheel.\n"
-"\n"
-"ALSA (Advanced Linux Sound Architecture) is a modularized architecture "
-"which\n"
-"supports quite a large range of ISA, USB and PCI cards.\n"
-"\n"
-"It also provides a much higher API than OSS.\n"
-"\n"
-"To use alsa, one can either use:\n"
-"- the old compatibility OSS api\n"
-"- the new ALSA api that provides many enhanced features but requires using "
-"the ALSA library.\n"
+msgid "Type of install"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/วินโดวส์ 95/98/NT"
+
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
 "\n"
-"\n"
-"Your card currently use the %s\"%s\" driver (default driver for your card is "
-"\"%s\")"
+"- Daemon (%s) include:\n"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid ""
-"Here you can select an alternative driver (either OSS or ALSA) for your "
-"sound card (%s)."
+msgid "%d comma separated numbers"
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, fuzzy, c-format
-msgid "Sound configuration"
-msgstr "การปรับแต่ง LAN"
-
-#: ../../harddrake/sound.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
-"currently uses \"%s\""
+"The rusers protocol allows users on a network to identify who is\n"
+"logged in on other responding machines."
 msgstr ""
 
-#: ../../harddrake/sound.pm:1
-#, c-format
-msgid "No alternative driver"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Automatic Steps Configuration"
+msgstr "Boot Style Configuration"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "enable radio support"
+msgid ""
+"Want to know more and to contribute to the Open Source community? Get "
+"involved in the Free Software world!"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Radio support:"
+msgid "Barbados"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "PLL setting:"
-msgstr "ฟอร์แมต"
+msgid "Please select data to backup..."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "number of capture buffers for mmap'ed capture"
+msgid ""
+"Connection failed.\n"
+"Verify your configuration in the Mandrake Control Center."
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Number of capture buffers:"
+msgid "received"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Tuner type:"
-msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "/File/_New"
+msgstr "/ไฟล์/_ใหม่"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Card model:"
-msgstr "Card mem (DMA)"
+msgid "The DNS Server IP"
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"For most modern TV cards, the bttv module of the GNU/Linux kernel just auto-"
-"detect the rights parameters.\n"
-"If your card is misdetected, you can force the right tuner and card types "
-"here. Just select your tv card parameters if needed."
+msgid "IP Range End:"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
-#, fuzzy, c-format
-msgid "Unknown|Generic"
-msgstr "Generic"
+#: ../../security/level.pm:1
+#, c-format
+msgid "High"
+msgstr "สูง"
 
-#: ../../harddrake/v4l.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Unknown|CPH06X (bt878) [many vendors]"
+msgid "NoVideo"
+msgstr "NoVideo"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "this field describes the device"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Unknown|CPH05X (bt878) [many vendors]"
+msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../harddrake/v4l.pm:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect"
-msgstr "ใช้ auto detection"
+msgid "Local Printers"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../interactive/newt.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "Do"
-msgstr "ทำเรียบร้อยแล้ว"
+msgid "Installation image directory"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../interactive/stdio.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Your choice? (default %s) "
-msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
+msgid "NIS Server"
+msgstr "เซิร์ฟเวอร์ NIS"
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Bad choice, try again\n"
-msgstr "ตัวเลือกผิดพลาด โปรดทดลองอีกครั้ง\n"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Port: %s"
+msgstr "Port"
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid "Re-submit"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Spain"
+msgstr "สเปน"
 
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"=> Notice, a label changed:\n"
-"%s"
-msgstr ""
+msgid "This user name has already been added"
+msgstr "ชื่อผู้ใช้นี้ได้ถูกเพิ่มลงไปในระบบเรียบร้อยแล้ว"
 
-#: ../../interactive/stdio.pm:1
-#, c-format
-msgid ""
-"Please choose the first number of the 10-range you wish to edit,\n"
-"or just hit Enter to proceed.\n"
-"Your choice? "
-msgstr ""
+#: ../../interactive.pm:1
+#, fuzzy, c-format
+msgid "Choose a file"
+msgstr "เลือกกิจกรรม"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "=> There are many things to choose from (%s).\n"
-msgstr ""
+msgid "Apply"
+msgstr "มีผลทันที"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Your choice? (default `%s'%s) "
-msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
+msgid "Auto-detect available ports"
+msgstr "ใช้ auto detection"
 
-#: ../../interactive/stdio.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid " enter `void' for void entry"
-msgstr ""
+msgid "Internet Connection Sharing currently disabled"
+msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"
 
-#: ../../interactive/stdio.pm:1
-#, fuzzy, c-format
-msgid "Do you want to click on this button?"
-msgstr "คุณต้องการใช้ aboot หรือไม่"
+#: ../../lang.pm:1
+#, c-format
+msgid "San Marino"
+msgstr ""
 
-#: ../../interactive/stdio.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "Button `%s': %s"
-msgstr "พาร์ติชั่น %s"
+msgid "Belgium"
+msgstr "เบลเยี่ยม"
 
-#: ../../interactive/stdio.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Your choice? (0/1, default `%s') "
-msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
+msgid "Kuwait"
+msgstr "ออก"
 
-#: ../../interactive/stdio.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Entries you'll have to fill:\n"
-"%s"
-msgstr ""
+msgid "Choose the window manager to run:"
+msgstr "เลือก window manager:"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Loading module %s failed.\n"
-"Do you want to try again with other parameters?"
+msgid "sub generation of the cpu"
 msgstr ""
-"การโหลดโมดูล %s ล้มเหลว\n"
-"คุณต้องการให้ทดลองอีกครั้งด้วยพารามิเตอร์อื่นๆอีกหรือไม่?"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Specify options"
-msgstr "ระบุอ๊อปชั่น"
-
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Autoprobe"
-msgstr "ตรวจหาอัตโนมัติ"
+msgid "First Time Wizard"
+msgstr ""
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"In some cases, the %s driver needs to have extra information to work\n"
-"properly, although it normally works fine without them. Would you like to "
-"specify\n"
-"extra options for it or allow the driver to probe your machine for the\n"
-"information it needs? Occasionally, probing will hang a computer, but it "
-"should\n"
-"not cause any damage."
+"An error occurred, but I don't know how to handle it nicely.\n"
+"Continue at your own risk."
 msgstr ""
-"ในบางกรณี สำหรับไดรเวอร์ %s จะจำเป็นต้องใช้ข้อมูลเพิ่มเติมเพื่อ\n"
-"ให้สามารถทำงานได้ถูกต้อง แม้ว่าไดรเวอร์อาจทำงานได้โดยปกติ โดยปราศจาก\n"
-"ข้อมูลดังกล่าว   คุณต้องการจะระบุอ๊อปชั่นเพิ่มเติมพิเศษหรือให้โปรแกรมทำการ\n"
-"ตรวจหาข้อมูลที่จำเป็นต้องใช้? ในบางกรณีการตรวจหาอาจทำให้คอมพิวเตอร์แฮงค์\n"
-"แต่จะไม่เป็นอันตรายกับคอมพิวเตอร์"
+"มีความผิดพลาดเกิดขึ้น แต่โปรแกรมไม่สามารถแก้ไขได้\n"
+"หากทำงานต่ออาจเกิดความเสียหายได้"
 
-#. -PO: the %s is the driver type (scsi, network, sound,...)
-#: ../../modules/interactive.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Which %s driver should I try?"
-msgstr "ต้องการให้โปรแกรมทดลองใช้ไดรเวอร์ %s ชนิดใด?"
+msgid "please wait, parsing file: %s"
+msgstr "โปรดกรุณารอ,parsing file:%s"
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "Module options:"
-msgstr "อ๊อปชั่นของโมดูล:"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Taiwan"
+msgstr "ตำแหน่ง"
 
-#: ../../modules/interactive.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You may now provide options to module %s.\n"
-"Options are in format ``name=value name2=value2 ...''.\n"
-"For instance, ``io=0x300 irq=7''"
+msgid "Pakistan"
 msgstr ""
-"คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว\n"
-"อ๊อปชั่นจะอยู่ในรูปแบบ ``name=value name2=value2 ...''\n"
-"ตัวอย่างเช่น, ``io=0x300 irq=7''"
 
-#: ../../modules/interactive.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You may now provide options to module %s.\n"
-"Note that any address should be entered with the prefix 0x like '0x123'"
+"To be able to print with your Lexmark inkjet and this configuration, you "
+"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
+"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
+"\"Linux\" as operating system. The drivers come as RPM packages or shell "
+"scripts with interactive graphical installation. You do not need to do this "
+"configuration by the graphical frontends. Cancel directly after the license "
+"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
+"adjust the head alignment settings with this program."
 msgstr ""
 
-#: ../../modules/interactive.pm:1
-#, c-format
-msgid "(module %s)"
-msgstr "(โมดูล %s)"
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "Permissions"
+msgstr "เวอร์ชั่น: %s\n"
 
-#. -PO: the first %s is the card type (scsi, network, sound,...)
-#. -PO: the second is the vendor+model name
-#: ../../modules/interactive.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Installing driver for %s card %s"
-msgstr "ติดตั้งไดรเวอร์สำหรับ %s การ์ด %s"
+msgid "Provider name (ex provider.net)"
+msgstr "ชื่อผู้ให้บริการ (ex KSC)"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "See hardware info"
-msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"
+msgid "Version: %s\n"
+msgstr "เวอร์ชั่น: %s\n"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Do you have any %s interfaces?"
-msgstr "คุณมีอินเทอร์เฟส %s จำนวนเท่าไหร่?"
+msgid ""
+"Your system is low on resources. You may have some problem installing\n"
+"Mandrake Linux. If that occurs, you can try a text install instead. For "
+"this,\n"
+"press `F1' when booting on CDROM, then enter `text'."
+msgstr ""
+"เครื่องของคุณมีทรัพยากรค่อนข้างต่ำคุณอาจมีปัญหาติดตั้ง \n"
+"Mandrake Linux  ถ้าเป็นเช่นนั้น กรุณาทดลองติดตั้งแบบ text \n"
+"กรุณากด F1 ขณะ boot จาก cdrom แล้วพิมพ์ text"
 
-#: ../../modules/interactive.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Do you have another one?"
-msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
+msgid "Use the Windows partition for loopback"
+msgstr "ใช้ windows partion สำหรับการ Loopback"
 
-#: ../../modules/interactive.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Found %s %s interfaces"
-msgstr "ตรวจพบ %s อินเทอร์เฟส %s"
+msgid "Armenian (typewriter)"
+msgstr "อาร์เมเนียน (พิมพ์ดีด)"
 
-#: ../../modules/interactive.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "You can configure each parameter of the module here."
-msgstr ""
+msgid "Connection type: "
+msgstr "ชนิดการเชื่อมต่อ"
 
-#: ../../modules/parameters.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "comma separated strings"
-msgstr "ฟอร์แมตพาร์ติชั่น"
+msgid "Graphical interface"
+msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
 
-#: ../../modules/parameters.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
-msgid "comma separated numbers"
-msgstr ""
+msgid "XFree %s with 3D hardware acceleration"
+msgstr "XFree %s with 3D hardware acceleration"
 
-#: ../../modules/parameters.pm:1
-#, c-format
-msgid "%d comma separated strings"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "India"
+msgstr "Iranian"
 
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "%d comma separated numbers"
+msgid "Chad"
 msgstr ""
 
-#: ../../modules/parameters.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "a number"
-msgstr "หมายเลขโทรศัพท์"
+msgid "Slovakia"
+msgstr "สโลวาเนีย"
 
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"You need the alcatel microcode.\n"
-"Download it at\n"
-"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
-"and copy the mgmt.o in /usr/share/speedtouch"
+msgid "Singapore"
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The most common way to connect with adsl is pppoe.\n"
-"Some connections use pptp, a few use dhcp.\n"
-"If you don't know, choose 'use pppoe'"
+msgid "Cambodia"
 msgstr ""
-"การติดต่อโดยทั่วไปของ adsl คือ pppoe.\n"
-"บางครั้งอาจใช้  pptp มีน้อยคนที่ใช้  dhcp.\n"
-"ถ้าคุณไม่ทราบ เลือก 'use pppoe'"
 
-#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Connect to the Internet"
-msgstr "ต่อเข้า Internet "
+msgid "Monitor HorizSync: %s\n"
+msgstr "อัตราความถี่กวาดตามแนวนอน: %s\n"
 
-#: ../../network/adsl.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Sagem (using pppoa) usb"
+msgid "Path"
 msgstr ""
 
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Alcatel speedtouch usb"
+msgid ""
+"Here you can specify any arbitrary command line into which the job should be "
+"piped instead of being sent directly to a printer."
 msgstr ""
 
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use dhcp"
-msgstr "ใช้ dhcp"
-
-#: ../../network/adsl.pm:1
-#, c-format
-msgid "use pptp"
-msgstr "ใช้ pptp"
-
-#: ../../network/adsl.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "use pppoe"
-msgstr "ใช้ pppoe"
+msgid ""
+"The printing system (%s) will not be started automatically when the machine "
+"is booted.\n"
+"\n"
+"It is possible that the automatic starting was turned off by changing to a "
+"higher security level, because the printing system is a potential point for "
+"attacks.\n"
+"\n"
+"Do you want to have the automatic starting of the printing system turned on "
+"again?"
+msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Other ports"
-msgstr "กำลังตรวจสอบพอร์ต"
+msgid ""
+"Printer %s\n"
+"What do you want to modify on this printer?"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
 
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Everything (no firewall)"
-msgstr ""
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Add host"
+msgstr "เพิ่มผู้ใช้"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"Invalid port given: %s.\n"
-"The proper format is \"port/tcp\" or \"port/udp\", \n"
-"where port is between 1 and 65535."
+"If you really think that you know which driver is the right one for your "
+"card\n"
+"you can pick one in the above list.\n"
+"\n"
+"The current driver for your \"%s\" sound card is \"%s\" "
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"You can enter miscellaneous ports. \n"
-"Valid examples are: 139/tcp 139/udp.\n"
-"Have a look at /etc/services for information."
-msgstr ""
-
-#: ../../network/drakfirewall.pm:1
-#, c-format
-msgid "Which services would you like to allow the Internet to connect to?"
+"Would you like to allow users to share some of their directories?\n"
+"Allowing this will permit users to simply click on \"Share\" in konqueror "
+"and nautilus.\n"
+"\n"
+"\"Custom\" permit a per-user granularity.\n"
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"drakfirewall configurator\n"
-"\n"
-"Make sure you have configured your Network/Internet access with\n"
-"drakconnect before going any further."
+"Please choose load or save package selection on floppy.\n"
+"The format is the same as auto_install generated floppies."
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"drakfirewall configurator\n"
-"\n"
-"This configures a personal firewall for this Mandrake Linux machine.\n"
-"For a powerful and dedicated firewall solution, please look to the\n"
-"specialized MandrakeSecurity Firewall distribution."
+msgid "China (broadcast)"
 msgstr ""
 
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "No network card"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
-
-#: ../../network/drakfirewall.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "POP and IMAP Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "Use quota for backup files."
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Mail Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid "Configuring printer \"%s\"..."
+msgstr "การคอนฟิกเครื่องพิมพ์"
 
-#: ../../network/drakfirewall.pm:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Domain Name Server"
-msgstr "ชื่อโดเมน"
+msgid "Internet connection"
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
 
-#: ../../network/drakfirewall.pm:1
-#, fuzzy, c-format
-msgid "Web Server"
-msgstr "เซิร์ฟเวอร์"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid ""
+"Loading module %s failed.\n"
+"Do you want to try again with other parameters?"
+msgstr ""
+"การโหลดโมดูล %s ล้มเหลว\n"
+"คุณต้องการให้ทดลองอีกครั้งด้วยพารามิเตอร์อื่นๆอีกหรือไม่?"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "Zeroconf host name must not contain a ."
+msgid "Welcome to the Open Source world."
 msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Host name"
-msgstr "ชื่อโฮสต์:"
+msgid "Bosnia and Herzegovina"
+msgstr ""
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Zeroconf Host name"
-msgstr "ชื่อโฮสต์:"
-
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
 msgid ""
-"\n"
-"\n"
-"Enter a Zeroconf host name without any dot if you don't\n"
-"want to use the default host name."
-msgstr ""
+"You need a true filesystem (ext2/ext3, reiserfs, xfs, or jfs) for this mount "
+"point\n"
+msgstr "You need a true filesystem (ext2, reiserfs) for this mount point\n"
 
-#: ../../network/ethernet.pm:1 ../../network/network.pm:1
-#, c-format
-msgid "Configuring network"
-msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "You must enter a host name or an IP address.\n"
+msgstr "กรุณาทดสอบเม้าส์"
 
-#: ../../network/ethernet.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
 #, c-format
-msgid ""
-"Please choose which network adapter you want to use to connect to Internet."
-msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"
+msgid "Netherlands"
+msgstr "เนเธอร์แลนด์"
 
-#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Sending files by FTP"
+msgstr "บันทึกลงไฟล์"
+
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "Choose the network interface"
-msgstr "เลือก network interface"
+msgid "Internal ISDN card"
+msgstr "Internal ISDN card"
 
-#: ../../network/ethernet.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
-"No ethernet network adapter has been detected on your system.\n"
-"I cannot set up this connection type."
+"There's no known OSS/ALSA alternative driver for your sound card (%s) which "
+"currently uses \"%s\""
 msgstr ""
-"ไม่พบการ์ด ethernet \n"
-"ผมไม่สามารถจัดทำการติดต่อชนิดนี้"
 
-#: ../../network/ethernet.pm:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Title"
+msgstr "Table"
+
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Which dhcp client do you want to use?\n"
-"Default is dhcp-client."
+msgid "Install & convert Fonts"
 msgstr ""
-"ชนิดของ dhcp client ที่ต้องการใช้คืออะไร\n"
-"การเลือกเบื้องต้นคือ dhcp-client"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No ISDN PCI card found. Please select one on the next screen."
-msgstr "ไม่พบการ์ด ISDN PCI  กรุณาเลือกจากหน้าต่อไป"
+msgid "WARNING"
+msgstr ""
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"I have detected an ISDN PCI card, but I don't know its type. Please select a "
-"PCI card on the next screen."
-msgstr "ผมเจอการ์ด ISDN แบบ PCI แต่ผมไม่ทราบชนิด กรุณาเลือกหนื่งในการ์ด PCI ในหน้าต่อไป"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Installing bootloader"
+msgstr "ติดตั้งบูตโหลดเดอร์"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Which of the following is your ISDN card?"
-msgstr "คุณใช้การ์ด ISDN ใด?"
+msgid "replay"
+msgstr "เรียกอีกครั้ง"
 
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "ISDN Configuration"
-msgstr "การคอนฟิก ISDN"
+msgid "detected %s"
+msgstr "ค้นพบ %s"
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Abort"
-msgstr "เลิก"
+msgid "Virgin Islands (U.S.)"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "Continue"
-msgstr "ทำงานต่อหรือไม่?"
+msgid "Bad backup file"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
+"The setup of Internet connection sharing has already been done.\n"
+"It's currently disabled.\n"
 "\n"
-"If you have an ISA card, the values on the next screen should be right.\n"
-"\n"
-"If you have a PCMCIA card, you have to know the \"irq\" and \"io\" of your "
-"card.\n"
+"What would you like to do?"
 msgstr ""
-"\n"
-"ถ้าคุณมี การ์ด ISA ตัวเลขในหน้าต่อไปควรจะถูกต้องอยู่แล้ว\n"
-"\n"
-"ถ้าคุณมีการ์ด PCMCIA คุณต้องรู้ irq และ io ของการ์ดของคุณ\n"
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "I don't know"
-msgstr "ผมไม่ทราบ"
+msgid "Enter IP address and port of the host whose printers you want to use."
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "PCI"
-msgstr "PCI"
+msgid "Pipe into command"
+msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "ISA / PCMCIA"
-msgstr "ISA / PCMCIA"
+msgid ""
+"Some hardware on your computer needs ``proprietary'' drivers to work.\n"
+"You can find some information about them at: %s"
+msgstr ""
+"hardware บางชนิดต้องการ driver พิเศษ\n"
+"คุณสามารถหาข้อมูลได้จาก: %s"
 
-#: ../../network/isdn.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "What kind of card do you have?"
-msgstr "คุณมีการ์ดชนิดใด?"
+msgid "Detecting devices..."
+msgstr "กำลังตรวจสอบอุปกรณ์..."
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Found \"%s\" interface do you want to use it ?"
+msgid "Click here to launch the wizard ->"
 msgstr ""
 
-#: ../../network/isdn.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Which protocol do you want to use?"
-msgstr "Protocol ไหนที่คุณต้องการ"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "Protocol for the rest of the world"
-msgstr "Rest of the world"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid ""
-"Protocol for the rest of the world\n"
-"No D-Channel (leased lines)"
+msgid "Haiti"
 msgstr ""
-"Rest of the world \n"
-"No D-Channel (leased lines)"
-
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "European protocol"
-msgstr "Boot Protocol"
 
-#: ../../network/isdn.pm:1
-#, fuzzy, c-format
-msgid "European protocol (EDSS1)"
-msgstr "ยุโรป (EDS11)"
-
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Select your provider.\n"
-"If it isn't listed, choose Unlisted."
+"Description of the fields:\n"
+"\n"
 msgstr ""
-"เลือกผู้ให้บริการ\n"
-"ถ้าไม่มีเลือก ไม่มี (unlisted)"
 
-#: ../../network/isdn.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "External ISDN modem"
-msgstr "External ISDN modem"
+msgid "the name of the CPU"
+msgstr ""
 
-#: ../../network/isdn.pm:1
-#, c-format
-msgid "Internal ISDN card"
-msgstr "Internal ISDN card"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Refreshing printer data..."
+msgstr "อ่าน CUPS drivers database..."
 
-#: ../../network/isdn.pm:1
+#: ../../install2.pm:1
 #, c-format
-msgid "What kind is your ISDN connection?"
-msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
+msgid "You must also format %s"
+msgstr ""
 
-#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Network Configuration Wizard"
-msgstr "Network Configuration Wizard"
+msgid "Be careful: this operation is dangerous."
+msgstr "ระวัง การทำงานนี้อันตราย"
 
-#: ../../network/isdn.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Old configuration (isdn4net)"
-msgstr "ตรวจพบคอนฟิกของ Firewall"
+msgid "Insert a floppy containing package selection"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
 
-#: ../../network/isdn.pm:1
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "New configuration (isdn-light)"
-msgstr "ตรวจพบคอนฟิกของ Firewall"
-
-#: ../../network/isdn.pm:1
-#, c-format
-msgid ""
-"Which ISDN configuration do you prefer?\n"
-"\n"
-"* The Old configuration uses isdn4net. It contains powerful\n"
-"  tools, but is tricky to configure, and not standard.\n"
-"\n"
-"* The New configuration is easier to understand, more\n"
-"  standard, but with less tools.\n"
-"\n"
-"We recommand the light configuration.\n"
-msgstr ""
+msgid "Server: "
+msgstr "เซิร์ฟเวอร์"
 
-#: ../../network/modem.pm:1
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Do nothing"
-msgstr "but not matching"
+msgid "Security Alerts:"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
 
-#: ../../network/modem.pm:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Install rpm"
-msgstr "ติดตั้ง"
+msgid "Sweden"
+msgstr "สวีเดน"
 
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"\"%s\" based winmodem detected, do you want to install needed software ?"
+msgid "Use Expect for SSH"
 msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Title"
-msgstr "Table"
+msgid "Poland"
+msgstr "ไอซ์แลนด์"
 
-#: ../../network/modem.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"Your modem isn't supported by the system.\n"
-"Take a look at http://www.linmodems.org"
-msgstr ""
+msgid "Importance: %s\n"
+msgstr "ความสำคัญ: %s\n"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Second DNS Server (optional)"
-msgstr "เซิรฟ์เวอร์ DNS เครื่องที่สอง (optional)"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you want to eject your tape after the backup."
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "First DNS Server (optional)"
-msgstr "เซิรฟ์เวอร์ DNS เครื่องแรก (optional)"
+#: ../../network/drakfirewall.pm:1
+#, fuzzy, c-format
+msgid "Other ports"
+msgstr "กำลังตรวจสอบพอร์ต"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Domain name"
-msgstr "ชื่อโดเมน"
+msgid "number of capture buffers for mmap'ed capture"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "CHAP"
+msgid "SMBus controllers"
 msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Script-based"
-msgstr "รูปแบบสคริปต์"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, fuzzy, c-format
+msgid "Connection timeout (in sec)"
+msgstr "ชนิดการเชื่อมต่อ"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Terminal-based"
-msgstr "รูปแบบเทอร์มินอล"
+msgid ""
+"Some of the early i486DX-100 chips cannot reliably return to operating mode "
+"after the \"halt\" instruction is used"
+msgstr ""
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "PAP"
-msgstr "PAP"
+msgid "Croatian"
+msgstr "Croatian"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Login ID"
-msgstr "หมายเลขประจำตัวการล็อกอิน"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Use existing partition"
+msgstr "ใช้พาร์ติชั่นที่มีอยู่"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Phone number"
-msgstr "หมายเลขโทรศัพท์"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Unable to contact mirror %s"
+msgstr "ไม่สามารถ forkได้.%s"
 
-#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Connection name"
-msgstr "ชื่อการเชื่อมต่อ"
+msgid "/Help/_About..."
+msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."
 
-#: ../../network/modem.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Dialup options"
-msgstr "อ็อปชั่นของการหมุนโทรศัพท์"
+msgid "Remove user directories before restore."
+msgstr ""
 
-#: ../../network/modem.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Please choose which serial port your modem is connected to."
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid ""
+"You are going to configure a remote printer. This needs working network "
+"access, but your network is not configured yet. If you go on without network "
+"configuration, you will not be able to use the printer which you are "
+"configuring now. How do you want to proceed?"
+msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../network/tools.pm:1
-#, c-format
-msgid "Network Configuration"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "CUPS printer configuration"
+msgstr "การคอนฟิก Internet"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Problems occured during configuration.\n"
-"Test your connection via net_monitor or mcc. If your connection doesn't "
-"work, you might want to relaunch the configuration."
+msgid "could not find any font in your mounted partitions"
 msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"After this is done, we recommend that you restart your X environment to "
-"avoid any hostname-related problems."
+msgid "F00f bug"
 msgstr ""
-"เมื่อทุกอย่างเสร็จสิ้น ผมแนะนำให้ท่านเริ่มทำงาน X windows ใหม่\n"
-"เพื่อป้องกันปัญหา hostname ที่อาจเกิดขึ้นได้"
 
-#: ../../network/netconnect.pm:1
+#: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
+#, c-format
+msgid "XFree %s"
+msgstr "XFree %s"
+
+#: ../../network/ethernet.pm:1
 #, c-format
 msgid ""
-"Congratulations, the network and Internet configuration is finished.\n"
-"The configuration will now be applied to your system.\n"
-"\n"
+"Which dhcp client do you want to use?\n"
+"Default is dhcp-client."
 msgstr ""
-"การปรับแต่ง internet/network เรียบร้อยแล้ว\n"
-"\n"
-"ค่าต่างๆจะถูกนำไปใช้เดี๋ยวนี้\n"
+"ชนิดของ dhcp client ที่ต้องการใช้คืออะไร\n"
+"การเลือกเบื้องต้นคือ dhcp-client"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid ""
-"A problem occured while restarting the network: \n"
-"\n"
-"%s"
-msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
+msgid "Domain Name:"
+msgstr "ชื่อโดเมน"
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "The network needs to be restarted. Do you want to restart it ?"
-msgstr ""
-"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
-"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Network configuration"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Do you want to start the connection at boot?"
-msgstr "คุณต้องการต่อตอน boot หรือไม่"
+msgid "On Floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Internet connection"
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+msgid "Restore"
+msgstr "เรียกคืนจากไฟล์"
 
-#: ../../network/netconnect.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"You have configured multiple ways to connect to the Internet.\n"
-"Choose the one you want to use.\n"
-"\n"
+msgid "if set to yes, check if the network devices are in promiscuous mode."
 msgstr ""
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Choose the connection you want to configure"
-msgstr "เลือกเครื่องมือที่คุณต้องการใช้"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Looking for available packages..."
+msgstr "กำลังหาแพ็คเก็จที่มีอยู่"
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "ethernet card(s) detected"
-msgstr "ethernet card(s) ที่พบ"
+msgid "Init Message"
+msgstr "ข้อความ init"
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN connection"
-msgstr "LAN connection"
+msgid "Rescue partition table"
+msgstr "กู้ตารางพาร์ติชั่น"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "cable connection detected"
-msgstr "cable connection"
+msgid "Connection complete."
+msgstr "ชนิดการเชื่อมต่อ"
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Cable connection"
-msgstr "cable connection"
+msgid "Cyprus"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "detected"
-msgstr "ค้นพบ %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Remove from RAID"
+msgstr "ลบออกจาก RAID"
 
-#: ../../network/netconnect.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "ADSL connection"
-msgstr "LAN connection"
+msgid "This encryption key is too simple (must be at least %d characters long)"
+msgstr "รหัสลับง่ายเกินไป (ต้องมีอย่างน้อย %d ตัวอักษร)"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "detected %s"
-msgstr "ค้นพบ %s"
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Configuration Wizards"
+msgstr "Network Configuration Wizard"
 
 #: ../../network/netconnect.pm:1
 #, c-format
 msgid "ISDN connection"
 msgstr "การติดต่อโดยใช้ ISDN"
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Winmodem connection"
-msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
-
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "detected on port %s"
-msgstr "ค้นหาเจอบน port %s"
+msgid "primary"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Normal modem connection"
-msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
+msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Detecting devices..."
-msgstr "กำลังตรวจสอบอุปกรณ์..."
+msgid ""
+"This dialog is used to choose which services you wish to start at boot\n"
+"time.\n"
+"\n"
+"DrakX will list all the services available on the current installation.\n"
+"Review each one carefully and uncheck those which are not needed at boot\n"
+"time.\n"
+"\n"
+"A short explanatory text will be displayed about a service when it is\n"
+"selected. However, if you are not sure whether a service is useful or not,\n"
+"it is safer to leave the default behavior.\n"
+"\n"
+"!! At this stage, be very careful if you intend to use your machine as a\n"
+"server: you will probably not want to start any services that you do not\n"
+"need. Please remember that several services can be dangerous if they are\n"
+"enabled on a server. In general, select only the services you really need.\n"
+"!!"
+msgstr ""
 
-#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
+#: ../../any.pm:1 ../../help.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Expert Mode"
-msgstr "โหมดผู้เชี่ยวชาญ"
+msgid "Skip"
+msgstr "ข้ามไป"
 
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Use auto detection"
-msgstr "ใช้ auto detection"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Niue"
+msgstr "NoVideo"
 
-#: ../../network/netconnect.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Choose the profile to configure"
-msgstr "เลือก profile ที่จะปรับแต่ง"
+msgid ""
+"Activates/Deactivates all network interfaces configured to start\n"
+"at boot time."
+msgstr ""
+"Activates/Deactivates network interfaces ทั้งหมด ที่ถูกตั้งให้\n"
+"เริ่มทำงานตอน boot"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Welcome to The Network Configuration Wizard.\n"
-"\n"
-"We are about to configure your internet/network connection.\n"
-"If you don't want to use the auto detection, deselect the checkbox.\n"
+"the CPU frequency in MHz (Megahertz which in first approximation may be "
+"coarsely assimilated to number of instructions the cpu is able to execute "
+"per second)"
 msgstr ""
-"ยินดีต้อนรับสู่ Network Configuration Wizard\n"
-"\n"
-"เรากำลังจะปรับแต่ง internet/network \n"
-"ถ้าคุณไม่ต้องการ auto detection กรุณายกเลิก checkbox.\n"
 
-#: ../../network/netconnect.pm:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid ""
-"Because you are doing a network installation, your network is already "
-"configured.\n"
-"Click on Ok to keep your configuration, or cancel to reconfigure your "
-"Internet & Network connection.\n"
+msgid "important"
+msgstr "สำคัญ"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Total Progress"
 msgstr ""
-"เนื่องจากคุณใช้การติดตั้งแบบ network ระบบ network จึงใช้ได้อยู่แล้ว\n"
-"กด OK เพื่อรักษาค่าคอนฟิกเดิมไว้ หรือเลือก ยกเลิกเพื่อปรับแต่งใหม่\n"
 
-#: ../../network/netconnect.pm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
+"DrakX will first detect any IDE devices present in your computer. It will\n"
+"also scan for one or more PCI SCSI cards on your system. If a SCSI card is\n"
+"found, DrakX will automatically install the appropriate driver.\n"
 "\n"
+"Because hardware detection is not foolproof, DrakX may fail in detecting\n"
+"your hard drives. If so, you'll have to specify your hardware by hand.\n"
 "\n"
+"If you had to manually specify your PCI SCSI adapter, DrakX will ask if you\n"
+"want to configure options for it. You should allow DrakX to probe the\n"
+"hardware for the card-specific options which are needed to initialize the\n"
+"adapter. Most of the time, DrakX will get through this step without any\n"
+"issues.\n"
 "\n"
-"We are now going to configure the %s connection.\n"
+"If DrakX is not able to probe for the options to automatically determine\n"
+"which parameters need to be passed to the hardware, you'll need to manually\n"
+"configure the driver."
+msgstr ""
+"DrakX จะพยายามหา PCI SCSI adapter(s)  ถ้า DrakX\n"
+"หาเจอ SCSI adapter และรู้ว่าควรใช้ไดร์เวอร์อะไร มันก็จะ\n"
+"ถูกติดตั้งโดยออโตเมติก\n"
 "\n"
 "\n"
-"Press OK to continue."
-msgstr ""
+"ถ้าคุณมี SCSI adapter ISA adapter หรือ PCI SCSI adapter ที่ DrakX\n"
+"ไม่สามารถหาเจอ  คุณจะโดนถามว่ามี  SCSI adapter ในเครื่องของคุณ\n"
+"หรือไม่  ถ้าไม่มีกรุณากดที่ \"ไม่\"  แต่ถ้าคุณกดลงที่  \"ไช่\" คุณจะต้องเลือก\n"
+"ชนิดของ adapter ที่คุณมีอยู่\n"
 "\n"
-"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
-
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "We are now going to configure the %s connection."
-msgstr ""
 "\n"
-"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
-
-#: ../../network/netconnect.pm:1
-#, c-format
-msgid "Internet connection & configuration"
-msgstr "การเชื่อมต่อ Internet และการปรับแต่ง"
+"ถ้าคุณเป็นคนเลือก Adapter เอง DrakX จะถามว่าคุณจะป้อนข้อมูล\n"
+"Option หรือไม่  ถึงตรงนี้คุณควรจะให้ DrakX ค้นหา option ที่เหมาะสม\n"
+"ซึ่งโดยทั่วไปมันจะสามารถหาได้เองอย่างถูกต้อง\n"
+"\n"
+"\n"
+"แต่ถ้าไม่สำเร็จคุณจำเป็นที่จะต้องให้ข้อมูล Option เอง  คุณควรหาข้อมูลเพิ่ม\n"
+"เติมได้จากคู่มือ (บทที่ 3 ตอน Collective informations on your hardware ) หรือ \n"
+"จาก Web Site ของผู้ผลิต หรือ จาก Microsoft Windows ถ้าคุณมีติดตั้ง"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Configure the connection"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+msgid "Users"
+msgstr "ชื่อผู้ใช้"
 
-#: ../../network/netconnect.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Disconnect"
-msgstr "ยกเลิกติดต่อ..."
+msgid "Aruba"
+msgstr "Grub"
 
-#: ../../network/netconnect.pm:1
-#, fuzzy, c-format
-msgid "Connect"
-msgstr "เชื่อมต่ออยู่"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Preparing bootloader..."
+msgstr "กำลังเตรียมบูตโหลดเดอร์"
 
-#: ../../network/netconnect.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can reconfigure your connection."
+msgid "Gateway (e.g. %s)"
 msgstr ""
-"\n"
-"คุณสามารถคอนฟิกระบบเน็ตเวิร์กใหม่"
 
-#: ../../network/netconnect.pm:1
+#: ../../any.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"You can connect to the Internet or reconfigure your connection."
+msgid "The passwords do not match"
+msgstr "รหัสผ่านไม่เหมือนกัน"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Examples for correct IPs:\n"
 msgstr ""
-"\n"
-"คุณสามารถเชื่อมต่อ Internet หรือทำการแก้ใขการเชื่อมต่อใหม่"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You are not currently connected to the Internet."
-msgstr "คุณยังไม่ได้ต่อกับ Internet อยู่"
+msgid "Frequency (MHz)"
+msgstr ""
 
-#: ../../network/netconnect.pm:1
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"\n"
-"You can disconnect or reconfigure your connection."
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 msgstr ""
-"\n"
-"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
+"To use this saved packages selection, boot installation with ``linux "
+"defcfg=floppy''"
 
-#: ../../network/netconnect.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "You are currently connected to the Internet."
-msgstr "คุณติดต่อกับ Internet อยู่"
+msgid "the number of the processor"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "URL should begin with 'ftp:' or 'http:'"
-msgstr "ค่าของ Proxy ควรจะเป็น http://..."
+msgid "Hardware clock set to GMT"
+msgstr "คุณต้องการให้เซ็ตนาฬิกาฮาร์ดแวร์เป็น GMT?"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Give a file name"
+msgstr "ชื่อเต็ม"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the port that your printer is connected to."
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+
+#: ../../standalone/livedrake:1
 #, c-format
-msgid "Proxy should be http://..."
-msgstr "ค่าของ Proxy ควรจะเป็น http://..."
+msgid "Change Cd-Rom"
+msgstr "เปลี่ยน CD-ROM"
 
-#: ../../network/network.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "FTP proxy"
-msgstr "FTP proxy"
+msgid "Paraguay"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "HTTP proxy"
-msgstr "HTTP proxy"
+msgid "Use Incremental/Differential Backups  (do not replace old backups)"
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Proxies configuration"
-msgstr "การคอนฟิก Proxies"
+msgid "There's no known driver for your sound card (%s)"
+msgstr ""
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Gateway address should be in format 1.2.3.4"
-msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "force"
+msgstr "บังคับ"
 
-#: ../../network/network.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "DNS server address should be in format 1.2.3.4"
-msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
+msgid "Exit"
+msgstr "Ext2"
 
-#: ../../network/network.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Gateway device"
-msgstr "อุปกรณ์เกตเวย์"
+msgid ""
+"NOTE: Depending on the printer model and the printing system up to %d MB of "
+"additional software will be installed."
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Gateway (e.g. %s)"
+msgid ""
+"You don't have any configured interface.\n"
+"Configure them first by clicking on 'Configure'"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "DNS server"
-msgstr "เซิร์ฟเวอร์ DNS"
+msgid "Estonian"
+msgstr "Estonian"
 
-#: ../../network/network.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please enter your host name.\n"
-"Your host name should be a fully-qualified host name,\n"
-"such as ``mybox.mylab.myco.com''.\n"
-"You may also enter the IP address of the gateway if you have one."
-msgstr ""
-"โปรดใส่ชื่อของโฮสต์\n"
-"ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
-"ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
-"คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"
+"Apache is a World Wide Web server. It is used to serve HTML files and CGI."
+msgstr "Apache คือ World Wide Web server"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Add/Del Clients"
+msgstr "DHCP Client"
+
+#: ../../network/ethernet.pm:1 ../../standalone/drakgw:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid ""
-"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
-"enough '0' (zeroes)."
+msgid "Choose the network interface"
+msgstr "เลือก network interface"
+
+#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Unknown Model"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
-"frequency), or add enough '0' (zeroes)."
+msgid "CD/DVD burners"
 msgstr ""
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "IP address should be in format 1.2.3.4"
-msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
+msgid ""
+"Partition booted by default\n"
+"    (for MS-DOS boot, not for lilo)\n"
+msgstr ""
+"พาร์ติชั่นที่กำหนดให้บูตซึ่งกำหนดไว้แล้ว\n"
+"    (สำหรับบูตของ MS-DOS ไม่ใช่ lilo)\n"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Start at boot"
-msgstr "เริ่มทำงานตอน boot"
+msgid "choose image"
+msgstr "เลือกกิจกรรม"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Assign host name from DHCP address"
-msgstr "กรุณาทดสอบเม้าส์"
+#: ../../network/shorewall.pm:1
+#, c-format
+msgid "Firewalling configuration detected!"
+msgstr "ตรวจพบคอนฟิกของ Firewall"
 
-#: ../../network/network.pm:1
-#, fuzzy, c-format
-msgid "Network Hotplugging"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Connection name"
+msgstr "ชื่อการเชื่อมต่อ"
 
-#: ../../network/network.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "Track network card id (useful for laptops)"
+msgid ""
+"x coordinate of text box\n"
+"in number of characters"
 msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "DHCP host name"
-msgstr "ชื่อโฮสต์:"
+msgid "Updating package selection"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
 
-#: ../../network/network.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Netmask"
-msgstr "เน็ตมาสก์"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Where do you want to mount the loopback file %s?"
+msgstr "คุณต้องการเม้าท์ loopback file %s ไว้ที่ใด?"
 
-#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "IP address"
-msgstr "ค่า IP"
+msgid ""
+"The floppy has been successfully generated.\n"
+"You may now replay your installation."
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "(bootp/dhcp/zeroconf)"
-msgstr "(bootp/dhcp)"
+msgid "the number of buttons the mouse has"
+msgstr "2 buttons"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Automatic IP"
-msgstr "กำหนดค่า IP แบบอัตโนมัติ"
+msgid ""
+"Please enter the directory (or module) to\n"
+" put the backup on this host."
+msgstr ""
 
-#: ../../network/network.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid " (driver %s)"
-msgstr " (driver %s)"
+msgid "Replay"
+msgstr "เรียกอีกครั้ง"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup other files"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Configuring network device %s"
-msgstr "กำลังคอนฟิกอุปกรณ์เน็ตเวิร์ก %s"
+msgid "No floppy drive available"
+msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Please enter the IP configuration for this machine.\n"
-"Each item should be entered as an IP address in dotted-decimal\n"
-"notation (for example, 1.2.3.4)."
+msgid "Backup files are corrupted"
 msgstr ""
-"โปรดกรอกข้อมูลการคอนฟิกค่า IP สำหรับเครื่องนี้\n"
-"ข้อมูลแต่ละอย่างสามารถใส่เข้าไปได้โดยใช้ค่า IP ในรูปแบบตัวเลขคั่นด้วยจุด\n"
-"(dotted-decimal notation) ตัวอย่างเช่น 1.2.3.4"
 
-#: ../../network/network.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"WARNING: this device has been previously configured to connect to the "
-"Internet.\n"
-"Simply accept to keep this device configured.\n"
-"Modifying the fields below will override this configuration."
+msgid "TV norm:"
 msgstr ""
-"คำเตือน: อุปกรณ์นี้ได้ถูกปรับแต่งให้ใช้ในการต่อเข้า internet\n"
-"คุณสามารถยอมรับค่าต่างๆหรือทำการแก้ใขค่าต่างๆข้างล่างนี้\n"
-" "
 
-#: ../../network/shorewall.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Warning! An existing firewalling configuration has been detected. You may "
-"need some manual fixes after installation."
+msgid "Cpuid family"
 msgstr ""
 
-#: ../../network/shorewall.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Firewalling configuration detected!"
-msgstr "ตรวจพบคอนฟิกของ Firewall"
+msgid "32 MB"
+msgstr "32 MB"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Account Password"
-msgstr "รหัสผ่าน"
+msgid "Lithuanian AZERTY (new)"
+msgstr "Lithuanian AZERTY (new)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Account Login (user name)"
-msgstr "Account Login (user name)"
+msgid "yes means the arithmetic coprocessor has an exception vector attached"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Connection timeout (in sec)"
-msgstr "ชนิดการเชื่อมต่อ"
+msgid ""
+"You've selected a software RAID partition as root (/).\n"
+"No bootloader is able to handle this without a /boot partition.\n"
+"Please be sure to add a /boot partition"
+msgstr ""
+"คุณได้เลือก Software RAID พาร์ติชั่น เป็น root (/) \n"
+"bootloader ไม่สามารถทำงานโดยไม่มี /boot พาร์ติชั่น \n"
+"เพราะฉนั้นจำเป็นต้องเพิ่ม /boot พาร์ติชั่น"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Connection speed"
-msgstr "ชนิดการเชื่อมต่อ"
+msgid "Previous"
+msgstr "<- ก่อน"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../any.pm:1
 #, c-format
-msgid "Dialing mode"
-msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "Choose your country"
-msgstr "เลือกคีย์บอร์ด"
+msgid "Other OS (MacOS...)"
+msgstr "ระบบปฏิบัติการอื่นๆ (Mac OS...)"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Provider dns 2 (optional)"
-msgstr "ผู้ให้บริการ dns 2 (optional)"
+msgid "To activate the mouse,"
+msgstr "เพื่อให้เม้าส์ทำงาน"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Provider dns 1 (optional)"
-msgstr "ผู้ให้บริการ dns 1 (optional)"
+msgid "Bringing up the network"
+msgstr "ระบบเน็ตเวิร์กกำลังจะทำงาน"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Provider phone number"
-msgstr "หมายเลขโทรศัพท์"
+#: ../../common.pm:1
+#, fuzzy, c-format
+msgid "Screenshots will be available after install in %s"
+msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Provider name (ex provider.net)"
-msgstr "ชื่อผู้ให้บริการ (ex KSC)"
+msgid ""
+"More than one Microsoft partition has been detected on your hard drive.\n"
+"Please choose which one you want to resize in order to install your new\n"
+"Mandrake Linux operating system.\n"
+"\n"
+"Each partition is listed as follows: \"Linux name\", \"Windows name\"\n"
+"\"Capacity\".\n"
+"\n"
+"\"Linux name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard dive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". With IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc.\n"
+"\n"
+"\"Windows name\" is the letter of your hard drive under Windows (the first\n"
+"disk or partition is called \"C:\")."
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Your personal phone number"
-msgstr "เบอร์โทรศัพท์ส่วนตัว"
+msgid "Tanzania"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Card IO_1"
-msgstr "Card IO_1"
+msgid "Computing FAT filesystem bounds"
+msgstr "คำนวณขอบเขตของระบบไฟล์"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Card IO_0"
-msgstr "Card IO_0"
+msgid ""
+"\n"
+"Backup Sources: \n"
+msgstr ""
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Card IO"
-msgstr "Card IO"
+msgid "Content of the file"
+msgstr "ข้อความของ file"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card mem (DMA)"
-msgstr "Card mem (DMA)"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Authentication LDAP"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Card IRQ"
-msgstr "Card IRQ"
+msgid "Let me pick any driver"
+msgstr ""
 
-#: ../../network/tools.pm:1
-#, c-format
-msgid "Please fill or check the field below"
-msgstr "กรุณาเลือกช่องข้างล่างนี้"
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Profile "
+msgstr "Profile: "
 
-#: ../../network/tools.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Connection Configuration"
-msgstr "การคอนฟิก Connection"
-
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid ""
-"The system doesn't seem to be connected to the Internet.\n"
-"Try to reconfigure your connection."
+msgid "transmitted"
 msgstr ""
-"ไม่สามารถต่อเข้า Internet \n"
-"ลองทำการคอนฟิกใหม่อีกครั้ง"
 
-#: ../../network/tools.pm:1
-#, fuzzy, c-format
-msgid "For security reasons, it will be disconnected now."
-msgstr "เพื่อความปลอดภัย มันจะหยุดการติดต่อเดี๋ยวนี้"
-
-#: ../../network/tools.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "The system is now connected to the Internet."
-msgstr "ติดต่อเข้า Internet เรียบร้อย"
+msgid "Palestine"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Testing your connection..."
-msgstr "ทดสอบ connection..."
+msgid "RAID md%s\n"
+msgstr "RAID md%s\n"
 
-#: ../../network/tools.pm:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid "Do you want to try to connect to the Internet now?"
-msgstr "คุณต้องการทดสอบต่อเข้า Internet เดี๋ยวนี้หรือไม่"
+msgid "%d comma separated strings"
+msgstr ""
 
-#: ../../network/tools.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Internet configuration"
-msgstr "การคอนฟิก Internet"
+msgid "Here is the full list of keyboards available"
+msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
 
-#: ../../partition_table/raw.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
+msgid "Theme name"
+msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_Help"
+msgstr "/_ช่วยเหลือ"
+
+#: ../../standalone/scannerdrake:1
+#, c-format
 msgid ""
-"Something bad is happening on your drive. \n"
-"A test to check the integrity of data has failed. \n"
-"It means writing anything on the disk will end up with random, corrupted "
-"data."
+"Here you can choose whether the scanners connected to this machine should be "
+"accessable by remote machines and by which remote machines."
 msgstr ""
-"มีสิ่งไม่ดีเกิดขึ้นกับ disk ของคุณซึ่งเราไม่สามารถตรวจ\n"
-"สอบความถูกต้องของข้อมูลได้\n"
-"นั่นหมายความว่าการเขียนข้อมูลลงไปอาจกลายเป็นขยะ"
 
-#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid " (Default)"
-msgstr " (Default)"
+msgid "the width of the progress bar"
+msgstr ""
 
-#: ../../printer/cups.pm:1
-#, fuzzy, c-format
-msgid "On CUPS server \"%s\""
-msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cook Islands"
+msgstr ""
 
-#: ../../printer/cups.pm:1 ../../printer/main.pm:1
+#: ../../fs.pm:1
+#, c-format
+msgid "Formatting partition %s"
+msgstr "ฟอร์แมตพาร์ติชั่น %s"
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Remote Printers"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Hostname required"
+msgstr "ชื่อโฮสต์:"
 
-#: ../../printer/cups.pm:1 ../../printer/data.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "CUPS"
+msgid "Unselect fonts installed"
 msgstr ""
 
-#: ../../printer/cups.pm:1
+#: ../../any.pm:1 ../../help.pm:1 ../../install_steps_gtk.pm:1
+#: ../../install_steps_interactive.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/smbnfs_gtk.pm:1
+#: ../../interactive/http.pm:1 ../../interactive/newt.pm:1
+#: ../../interactive/stdio.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1 ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/draksec:1
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "(on this machine)"
-msgstr ""
+msgid "Cancel"
+msgstr "ยกเลิก"
 
-#: ../../printer/cups.pm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "(on %s)"
-msgstr "(โมดูล %s)"
+msgid "Searching for configured scanners ..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../printer/data.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "CUPS - Common Unix Printing System"
-msgstr ""
+msgid "Wheel"
+msgstr "Wheel"
 
-#: ../../printer/data.pm:1
+#: ../../harddrake/data.pm:1
+#, fuzzy, c-format
+msgid "Videocard"
+msgstr "โหมดของการแสดงผล"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "LPRng"
+msgid "\tBackups use tar and bzip2\n"
 msgstr ""
 
-#: ../../printer/data.pm:1
-#, c-format
-msgid "LPRng - LPR New Generation"
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove Selected"
+msgstr "ลบคิว"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/Autodetect _modems"
+msgstr "ใช้ auto detection"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Remove printer"
+msgstr "เครื่องพิมพ์แบบรีโมท"
+
+#: ../../install_interactive.pm:1
+#, fuzzy, c-format
+msgid ""
+"WARNING!\n"
+"\n"
+"DrakX will now resize your Windows partition. Be careful:\n"
+"this operation is dangerous. If you have not already done\n"
+"so, you should first exit the installation, run scandisk\n"
+"under Windows (and optionally run defrag), then restart the\n"
+"installation. You should also backup your data.\n"
+"When sure, press Ok."
 msgstr ""
+"ระวัง!\n"
+"DrakX กำลังจะลดขนาดพาร์ติชั่นของ windows การทำงานนี้อันตลายมาก\n"
+"ถ้าคุณยังไม่เคยทำมาก่อนคุณควรออกจากการทำงานนี้และรัน Scandisk บน\n"
+"Windows (และ defrag) แล้วค่อยเริ่มทำงานนี้ใหม่  และคุณสมควรที่จะทำการ\n"
+"Backup ข้อมูลสำคัญขึ้นมาก่อน\n"
+"เมื่อคุณแน่ใจแล้ว กด OK"
 
-#: ../../printer/data.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "LPD"
+msgid "Which services would you like to allow the Internet to connect to?"
 msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "LPD - Line Printer Daemon"
+msgid ""
+"Welcome to the mail configuration utility.\n"
+"\n"
+"Here, you'll be able to set up the alert system.\n"
 msgstr ""
 
-#: ../../printer/data.pm:1
+#: ../../install_steps_gtk.pm:1 ../../mouse.pm:1 ../../services.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../standalone/drakbackup:1
 #, c-format
-msgid "PDQ"
-msgstr ""
+msgid "Other"
+msgstr "อื่นๆ"
 
-#: ../../printer/data.pm:1
+#: ../../any.pm:1 ../../harddrake/v4l.pm:1
 #, c-format
-msgid "PDQ - Print, Don't Queue"
-msgstr ""
+msgid "Default"
+msgstr "Default"
 
-#: ../../printer/detect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Unknown Model"
+msgid "Button 2 Emulation"
 msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Unknown model"
+msgid "type1inst building"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "%s (Port %s)"
-msgstr "Port"
+msgid "Abiword"
+msgstr "เลิก"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Host %s"
-msgstr "ชื่อโฮสต์:"
+msgid "choose image file"
+msgstr "เลือกกิจกรรม"
 
-#: ../../printer/main.pm:1
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "X server"
+msgstr "X เซิร์ฟเวอร์"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Network %s"
-msgstr "Network interface"
+msgid "Domain Admin User Name"
+msgstr "ชื่อโดเมน"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Interface \"%s\""
-msgstr "Interface %s"
+msgid "There was an error while scanning for TV channels"
+msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "US keyboard (international)"
+msgstr "คีย์บอร์ดอเมริกัน (นานาชาติ)"
+
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Local network(s)"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+msgid "Not installed"
+msgstr "ออกจากการติดตั้ง"
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "Raw printer (No driver)"
-msgstr ""
+msgid "LAN connection"
+msgstr "LAN connection"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ", using command %s"
-msgstr ""
+msgid "/File/-"
+msgstr "/ไฟล์/-"
 
-#: ../../printer/main.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid " on Novell server \"%s\", printer \"%s\""
-msgstr ""
+msgid "Italian"
+msgstr "อิตาลี"
 
-#: ../../printer/main.pm:1
+#: ../../interactive.pm:1 ../../standalone/draksec:1
 #, c-format
-msgid " on SMB/Windows server \"%s\", share \"%s\""
+msgid "Basic"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ", TCP/IP host \"%s\", port %s"
+msgid ""
+"\n"
+" Copyright (C) 2002 by MandrakeSoft \n"
+"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
+"\n"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid " on LPD server \"%s\", printer \"%s\""
+msgid "Honduras"
 msgstr ""
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", printing to %s"
-msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
-
-#: ../../printer/main.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ", multi-function device"
+msgid "pdq"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ", multi-function device on HP JetDirect"
-msgstr ""
+msgid "Card IO"
+msgstr "Card IO"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid ", multi-function device on USB"
+msgid "when checked, owner and group won't be changed"
 msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", multi-function device on parallel port \\#%s"
+msgid ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
 msgstr ""
+"\n"
+"This special Bootstrap\n"
+"partition is for\n"
+"dual-booting your system.\n"
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid ", USB printer"
-msgstr "ไม่มีเครื่องพิมพ์"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid ", USB printer \\#%s"
+msgid ""
+"Please choose for each step whether it will replay like your install, or it "
+"will be manual"
 msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid " on parallel port \\#%s"
+msgid ""
+"You can also decide here whether scanners on remote machines should be made "
+"available on this machine."
 msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printers"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-
-#: ../../printer/main.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Pipe job into a command"
+msgid "\t-Network by FTP.\n"
 msgstr ""
 
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Enter a printer device URI"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Russian (Yawerty)"
+msgstr "รัสเซีย (Yawerty)"
 
-#: ../../printer/main.pm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Printer on NetWare server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid "You must enter a device or file name!"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
 
-#: ../../printer/main.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Printer on SMB/Windows 95/98/NT server"
-msgstr "SMB/วินโดวส์ 95/98/NT"
+msgid "/_Quit"
+msgstr "ออก"
 
-#: ../../printer/main.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Network printer (TCP/Socket)"
-msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
-
-#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote lpd server"
-msgstr "รีโมต lpd"
+msgid ""
+"You need the alcatel microcode.\n"
+"Download it at\n"
+"http://www.speedtouchdsl.com/dvrreg_lx.htm\n"
+"and copy the mgmt.o in /usr/share/speedtouch"
+msgstr ""
 
-#: ../../printer/main.pm:1
-#, fuzzy, c-format
-msgid "Printer on remote CUPS server"
-msgstr "Remote CUPS server"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Graphics memory: %s kB\n"
+msgstr "ขนาดหน่วยความจำของกราฟฟิคการ์ด: %s kB\n"
 
-#: ../../printer/main.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Remote printer"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid ""
+"This program is free software; you can redistribute it and/or modify\n"
+"it under the terms of the GNU General Public License as published by\n"
+"the Free Software Foundation; either version 2, or (at your option)\n"
+"any later version.\n"
+"\n"
+"This program is distributed in the hope that it will be useful,\n"
+"but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+"MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+"GNU General Public License for more details.\n"
+"\n"
+"You should have received a copy of the GNU General Public License\n"
+"along with this program; if not, write to the Free Software\n"
+"Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+msgstr ""
 
-#: ../../printer/main.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Local printer"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "access to compilation tools"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Configuring applications..."
-msgstr "การคอนฟิกเครื่องพิมพ์"
+msgid "Please select data to restore..."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
-#, fuzzy, c-format
-msgid "Printerdrake"
-msgstr "เครื่องพิมพ์"
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid ""
+"If you plan to use aboot, be carefull to leave a free space (2048 sectors is "
+"enough)\n"
+"at the beginning of the disk"
+msgstr ""
+"ถ้าคุณต้องการใช้ aboot ควรระวังว่าต้องมีที่ว่าง (2048 sectors) \n"
+"ด้านหน้าของ disk"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Removing printer \"%s\"..."
-msgstr "อ่าน CUPS drivers database..."
+msgid "Standard test page"
+msgstr "เครื่องมีอ Standard"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you really want to remove the printer \"%s\"?"
-msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Create"
+msgstr "สร้าง"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "What"
+msgstr ""
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "There was an error ordering packages:"
+msgstr "มีปัญหาการลำดับของแพ็คเก็จ:"
+
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Remove printer"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Bulgarian (BDS)"
+msgstr "บัลกาเรีย"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Learn how to use this printer"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+msgid "Disable Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Print test pages"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+msgid "Filesystem encryption key"
+msgstr "ประเภทของระบบไฟล์: "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgid "Gujarati"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
 msgid ""
-"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
-"GIMP."
+"Please choose the first number of the 10-range you wish to edit,\n"
+"or just hit Enter to proceed.\n"
+"Your choice? "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "Save theme"
+msgstr "ติดตั้งระบบ"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group"
+msgstr "เวิร์กกรุ๊ป (workgroup)"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Brazil"
+msgstr "บราซิล"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install"
+msgstr "ติดตั้ง"
+
+#: ../../network/isdn.pm:1 ../../network/netconnect.pm:1
 #, c-format
-msgid "Remove this printer from Star Office/OpenOffice.org/GIMP"
+msgid "Network Configuration Wizard"
+msgstr "Network Configuration Wizard"
+
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Removable media automounting"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Printing"
+msgstr "เครื่องพิมพ์"
+
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
+msgid "Unkown driver"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The printer \"%s\" was successfully added to Star Office/OpenOffice.org/GIMP."
+"There are no printers found which are directly connected to your machine"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Adding printer to Star Office/OpenOffice.org/GIMP"
-msgstr ""
+msgid "Create a new partition"
+msgstr "สร้างพาร์ติชั่นใหม่"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
+#, fuzzy, c-format
+msgid "Driver:"
+msgstr "Driver"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgid "unknown"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "The printer \"%s\" is set as the default printer now."
-msgstr ""
+msgid "Use fdisk"
+msgstr "ใช้ fdisk"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Default printer"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+#: ../../mouse.pm:1
+#, c-format
+msgid "MOVE YOUR WHEEL!"
+msgstr "เลื่อนล้อของคุณ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Set this printer as the default"
+msgid "sent: "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Printer options"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์"
+msgid "Automatic IP"
+msgstr "กำหนดค่า IP แบบอัตโนมัติ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "Printer manufacturer, model"
+msgid ""
+"There you are. Installation is now complete and your GNU/Linux system is\n"
+"ready to use. Just click \"%s\" to reboot the system. The first thing you\n"
+"should see after your computer has finished doing its hardware tests is the\n"
+"bootloader menu, giving you the choice of which operating system to start.\n"
+"\n"
+"The \"%s\" button shows two more buttons to:\n"
+"\n"
+" * \"%s\": to create an installation floppy disk that will automatically\n"
+"perform a whole installation without the help of an operator, similar to\n"
+"the installation you just configured.\n"
+"\n"
+"   Note that two different options are available after clicking the button:\n"
+"\n"
+"    * \"%s\". This is a partially automated installation. The partitioning\n"
+"step is the only interactive procedure.\n"
+"\n"
+"    * \"%s\". Fully automated installation: the hard disk is completely\n"
+"rewritten, all data is lost.\n"
+"\n"
+"   This feature is very handy when installing a number of similar machines.\n"
+"See the Auto install section on our web site for more information.\n"
+"\n"
+" * \"%s\"(*): saves a list of the packages selected in this installation.\n"
+"To use this selection with another installation, insert the floppy and\n"
+"start the installation. At the prompt, press the [F1] key and type >>linux\n"
+"defcfg=\"floppy\" <<.\n"
+"\n"
+"(*) You need a FAT-formatted floppy (to create one under GNU/Linux, type\n"
+"\"mformat a:\")"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Printer manufacturer, model, driver"
-msgstr ""
+msgid "Kensington Thinking Mouse"
+msgstr "Kensington Thinking Mouse"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Removing old printer \"%s\"..."
-msgstr "อ่าน CUPS drivers database..."
+msgid "Configuration of a remote printer"
+msgstr "การคอนฟิก"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Moldova"
+msgstr ""
+
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printer name, description, location"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Please check if you want to erase your tape before the backup."
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#, c-format
+msgid "An online platform to respond to enterprise support needs."
+msgstr ""
+
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Printer connection type"
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+msgid "URL should begin with 'ftp:' or 'http:'"
+msgstr "ค่าของ Proxy ควรจะเป็น http://..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Raw printer"
+msgid "Add a new rule at the end"
 msgstr "ไม่มีเครื่องพิมพ์"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Do it!"
+msgid ""
+"You can also decide here whether printers on remote machines should be "
+"automatically made available on this machine."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
-#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
-#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Close"
-msgstr "Mouse"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../modules/interactive.pm:1
+#, c-format
 msgid ""
-"Printer %s\n"
-"What do you want to modify on this printer?"
-msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+"You may now provide options to module %s.\n"
+"Options are in format ``name=value name2=value2 ...''.\n"
+"For instance, ``io=0x300 irq=7''"
+msgstr ""
+"คุณสามารถป้อนข้อมูลอ๊อปชั่นให้กับโมดูล %s ได้แล้ว\n"
+"อ๊อปชั่นจะอยู่ในรูปแบบ ``name=value name2=value2 ...''\n"
+"ตัวอย่างเช่น, ``io=0x300 irq=7''"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Modify printer configuration"
-msgstr "การคอนฟิก Internet"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Quit without writing the partition table?"
+msgstr "ออกโดยไม่ต้องเขียนตารางพาร์ติชั่น"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "Genius NetScroll"
+msgstr "Genius NetScroll"
+
+#: ../../standalone.pm:1
 #, fuzzy, c-format
-msgid "Add a new printer"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Installing packages..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Normal Mode"
-msgstr "โหมดธรรมดา"
+msgid "Dutch"
+msgstr "ฮอลแลนด์"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Change the printing system"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
+msgid "The following packages need to be installed:\n"
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Angola"
+msgstr ""
+
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "CUPS configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "service setting"
+msgstr "อุปกรณ์"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1 ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Refresh printer list (to display all available remote CUPS printers)"
-msgstr ""
+msgid "Custom"
+msgstr "แบบปรับแก้ได้ (Customized) "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "File is already used by another loopback, choose another one"
+msgstr "File already used by another loopback, choose another one"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Display all available remote CUPS printers"
+msgid "Read-only"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid ""
-"The following printers are configured. Double-click on a printer to change "
-"its settings; to make it the default printer; or to view information about "
-"it."
-msgstr ""
-"ต่อไปนี้เป็นข้อมูลรอการพิมพ์\n"
-"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
+msgid "Latvia"
+msgstr "ตำแหน่ง"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Printing system: "
+msgid "No known driver"
 msgstr ""
 
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "1 MB"
+msgstr "1 MB"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Checking installed software..."
+msgid ""
+"If it is not the one you want to configure, enter a device name/file name in "
+"the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing Foomatic..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+#: ../../standalone/draksound:1
+#, c-format
+msgid ""
+"No Sound Card has been detected on your machine. Please verify that a Linux-"
+"supported Sound Card is correctly plugged in.\n"
+"\n"
+"\n"
+"You can visit our hardware database at:\n"
+"\n"
+"\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Failed to configure printer \"%s\"!"
-msgstr "การคอนฟิกเครื่องพิมพ์"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Configure Local Area Network..."
+msgstr "ปรับแต่งระบบเน็ตเวิร์กภายใน..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, fuzzy, c-format
-msgid "Configuring printer \"%s\"..."
-msgstr "การคอนฟิกเครื่องพิมพ์"
+msgid "Launch the sound system on your machine"
+msgstr "รัน X-Window เมื่อเริ่มทำงาน"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Reading printer data..."
+msgid "Preparing printer database..."
 msgstr "อ่าน CUPS drivers database..."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Which printing system (spooler) do you want to use?"
-msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
+msgid "Information"
+msgstr "แสดงข้อมูล"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "Select Printer Spooler"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "No network card"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Setting Default Printer..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#, c-format
+msgid "Which filesystem do you want?"
+msgstr "คุณต้องการเลือก filesystem ใด"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing %s ..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+#: ../../mouse.pm:1
+#, c-format
+msgid "3 buttons"
+msgstr "3 buttons"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Removing %s ..."
-msgstr "ความละเอียดของภาพ %s\n"
+msgid "Detailed information"
+msgstr "แสดงข้อมูล"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The printing system (%s) will not be started automatically when the machine "
-"is booted.\n"
-"\n"
-"It is possible that the automatic starting was turned off by changing to a "
-"higher security level, because the printing system is a potential point for "
-"attacks.\n"
-"\n"
-"Do you want to have the automatic starting of the printing system turned on "
-"again?"
+msgid "Malta"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting the printing system at boot time"
-msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
-
-#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"You are about to install the printing system %s on a system running in the %"
-"s security level.\n"
-"\n"
-"This printing system runs a daemon (background process) which waits for "
-"print jobs and handles them. This daemon is also accessable by remote "
-"machines through the network and so it is a possible point for attacks. "
-"Therefore only a few selected daemons are started by default in this "
-"security level.\n"
+"Printer default settings\n"
 "\n"
-"Do you really want to configure printing on this machine?"
+"You should make sure that the page size and the ink type/printing mode (if "
+"available) and also the hardware configuration of laser printers (memory, "
+"duplex unit, extra trays) are set correctly. Note that with a very high "
+"printout quality/resolution printing can get substantially slower."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "Installing a printing system in the %s security level"
-msgstr ""
+msgid "This floppy is not FAT formatted"
+msgstr "่แผ่นฟล้อปปี้นี้ ไม่ใช่ แบบFAT"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "paranoid"
-msgstr "Paranoid"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Configuring network"
+msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1
 #, fuzzy, c-format
-msgid "high"
-msgstr "สูง"
+msgid "Graphic Card"
+msgstr "กราฟฟิคการ์ด"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Restarting printing system..."
-msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "Resizing Windows partition"
+msgstr "คำนวณขอบเขตของระบบไฟล์ Windows"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configuration of a remote printer"
-msgstr "การคอนฟิก"
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Provider dns 1 (optional)"
+msgstr "ผู้ให้บริการ dns 1 (optional)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The network access was not running and could not be started. Please check "
-"your configuration and your hardware. Then try to configure your remote "
-"printer again."
+msgid "Cameroon"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
 msgid ""
-"The network configuration done during the installation cannot be started "
-"now. Please check whether the network is accessable after booting your "
-"system and correct the configuration using the Mandrake Control Center, "
-"section \"Network & Internet\"/\"Connection\", and afterwards set up the "
-"printer, also using the Mandrake Control Center, section \"Hardware\"/"
-"\"Printer\""
+"You can now partition %s.\n"
+"When you are done, don't forget to save using `w'"
 msgstr ""
+"คุณสามารถพาร์ติชั่น %s เดี๋ยวนี้\n"
+"เมื่อเสร็จแล้วอย่าลืมบันทึกโดยใช้ `w'"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Configure the network now"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1 ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Go on without configuring the network"
-msgstr "กำลังคอนฟิกระบบเน็ตเวิร์ก"
+msgid "Close"
+msgstr "Mouse"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"You are going to configure a remote printer. This needs working network "
-"access, but your network is not configured yet. If you go on without network "
-"configuration, you will not be able to use the printer which you are "
-"configuring now. How do you want to proceed?"
+"\"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network functionality not configured"
-msgstr "ไม่มีการคอนฟิกจอภาพ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Starting network..."
-msgstr "ทดสอบ connection..."
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Refreshing printer data..."
-msgstr "อ่าน CUPS drivers database..."
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "Calendar"
+msgstr "ปฎิทิน"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You have transferred your former default printer (\"%s\"), Should it be also "
-"the default printer under the new printing system %s?"
+"Restore Selected\n"
+"Catalog Entry"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Transfer printer configuration"
-msgstr "การคอนฟิก Internet"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Transferring %s..."
+msgid ""
+"To use a remote lpd printer, you need to supply the hostname of the printer "
+"server and the printer name on that server."
 msgstr ""
+"หากคุณต้องการใช้คิวเครื่องพิมพ์แบบรีโมท คุณจะต้องป้อนข้อมูล\n"
+"ของชื่อโฮสต์ที่ให้บริการเครื่องพิมพ์นั้น และชื่อคิวของเซิร์ฟเวอร์นั้น\n"
+"ซึ่งเป็นที่ๆงานพิมพ์จะถูกเก็บไว้"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "New printer name"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "Iceland"
+msgstr "ไอซ์แลนด์"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"The printer \"%s\" already exists,\n"
-"do you really want to overwrite its configuration?"
+msgid "consolehelper missing"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Name of printer should contain only letters, numbers and the underscore"
-msgstr ""
+msgid "stopped"
+msgstr "หยุด"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Transfer"
+msgid "Whether the FPU has an irq vector"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid ""
-"A printer named \"%s\" already exists under %s. \n"
-"Click \"Transfer\" to overwrite it.\n"
-"You can also type a new name or skip this printer."
-msgstr ""
+msgid "Ext2"
+msgstr "Ext2"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Do not transfer printers"
-msgstr ""
+msgid "Expand Tree"
+msgstr "ขยาย tree"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
 msgid ""
+"The old \"%s\" driver is blacklisted.\n"
 "\n"
-"Mark the printers which you want to transfer and click \n"
-"\"Transfer\"."
-msgstr ""
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
+"It has been reported to oops the kernel on unloading.\n"
 "\n"
-"Also printers configured with the PPD files provided by their manufacturers "
-"or with native CUPS drivers cannot be transferred."
+"The new \"%s\" driver'll only be used on next bootstrap."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/netconnect.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"In addition, queues not created with this program or \"foomatic-configure\" "
-"cannot be transferred."
-msgstr ""
+msgid "Expert Mode"
+msgstr "โหมดผู้เชี่ยวชาญ"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "LPD and LPRng do not support IPP printers.\n"
-msgstr ""
+msgid "Printer options"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
-"printers.\n"
-msgstr ""
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Local Network adress"
+msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup your System files. (/etc directory)"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"CUPS does not support printers on Novell servers or printers sending the "
-"data into a free-formed command.\n"
+"You now have the opportunity to download updated packages. These packages\n"
+"have been updated after the distribution was released. They may\n"
+"contain security or bug fixes.\n"
+"\n"
+"To download these packages, you will need to have a working Internet \n"
+"connection.\n"
+"\n"
+"Do you want to install the updates ?"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Samba Server"
+msgstr "เซิร์ฟเวอร์ NIS"
+
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You can copy the printer configuration which you have done for the spooler %"
-"s to %s, your current spooler. All the configuration data (printer name, "
-"description, location, connection type, and default option settings) is "
-"overtaken, but jobs will not be transferred.\n"
-"Not all queues can be transferred due to the following reasons:\n"
+"Arguments: (arg, alert=1)\n"
+"\n"
+"Enable/Disable IP spoofing protection."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Your printer was configured automatically to give you access to the photo "
-"card drives from your PC. Now you can access your photo cards using the "
-"graphical program \"MtoolsFM\" (Menu: \"Applications\" -> \"File tools\" -> "
-"\"MTools File Manager\") or the command line utilities \"mtools\" (enter "
-"\"man mtools\" on the command line for more info). You find the card's file "
-"system under the drive letter \"p:\", or subsequent drive letters when you "
-"have more than one HP printer with photo card drives. In \"MtoolsFM\" you "
-"can switch between drive letters with the field at the upper-right corners "
-"of the file lists."
+msgid "Australian Optus cable TV"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_newt.pm:1
 #, c-format
 msgid ""
-"Your multi-function device was configured automatically to be able to scan. "
-"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
-"scanner when you have more than one) from the command line or with the "
-"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
-"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
-"\" menu. Call also \"man scanimage\" on the command line to get more "
-"information.\n"
-"\n"
-"Do not use \"scannerdrake\" for this device!"
-msgstr ""
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgstr "  <Tab>/<Alt-Tab> ระหว่างตัวเลือก | <Space> เลือก | <F12> หน้าถัดไป "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Printing test page(s)..."
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+msgid "Subnet:"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Print option list"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์"
+msgid "Zimbabwe"
+msgstr "อาจจะ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printing on the printer \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+msgid "Please enter the host name or IP."
+msgstr "กรุณาทดสอบเม้าส์"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Printing/Photo Card Access on \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+msgid "When"
+msgstr "Wheel"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning on \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Second DNS Server (optional)"
+msgstr "เซิรฟ์เวอร์ DNS เครื่องที่สอง (optional)"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printing/Scanning/Photo Cards on \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+#: ../../lang.pm:1
+#, c-format
+msgid "Finland"
+msgstr "ฟินแลนด์"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"To know about the options available for the current printer read either the "
-"list shown below or click on the \"Print option list\" button.%s%s%s\n"
+"Arguments: (arg)\n"
 "\n"
+"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
+"\\fIarg\\fP = ALL. Only local ones\n"
+"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
+"services you need, use /etc/hosts.allow\n"
+"(see hosts.allow(5))."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid ""
-"\n"
-"The \"%s\" and \"%s\" commands also allow to modify the option settings for "
-"a particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\".\n"
-msgstr ""
+msgid "Color depth: %s\n"
+msgstr "อความละเอียดสี: %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid ""
-"You can also use the graphical interface \"xpdq\" for setting options and "
-"handling printing jobs.\n"
-"If you are using KDE as desktop environment you have a \"panic button\", an "
-"icon on the desktop, labeled with \"STOP Printer!\", which stops all print "
-"jobs immediately when you click it. This is for example useful for paper "
-"jams.\n"
-msgstr ""
+msgid "You can't unselect this package. It must be upgraded"
+msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้  มันจำเป็นที่จะต้องถูก upgrade"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Loading from floppy"
+msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+
+#: ../../standalone/drakperm:1
 #, c-format
 msgid ""
-"This command you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications. But here do not supply the file name "
-"because the file to print is provided by the application.\n"
+"Drakperm is used to see files to use in order to fix permissions, owners, "
+"and groups via msec.\n"
+"You can also edit your own rules which will owerwrite the default rules."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../ugtk.pm:1
 #, c-format
-msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\" or \"%s <file>\".\n"
+msgid "-adobe-times-bold-r-normal--17-*-100-100-p-*-iso8859-*,*-r-*"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Slovenia"
+msgstr "สโลวาเนีย"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"To get a list of the options available for the current printer click on the "
-"\"Print option list\" button."
+"Enter a user\n"
+"%s"
 msgstr ""
+"ให้ใส่ผู้ใช้\n"
+"%s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"\n"
-"The \"%s\" command also allows to modify the option settings for a "
-"particular printing job. Simply add the desired settings to the command "
-"line, e. g. \"%s <file>\". "
+"- PCI and USB devices: this lists the vendor, device, subvendor and "
+"subdevice PCI/USB ids"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "ProgressBar color selection"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+
+#: ../../any.pm:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) use the command \"%s "
-"<file>\".\n"
+"Here are the entries on your boot menu so far.\n"
+"You can create additional entries or change the existing ones."
 msgstr ""
+"ต่อไปนี้เป็นข้อมูลต่างๆ\n"
+"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"Here is a list of the available printing options for the current printer:\n"
-"\n"
-msgstr ""
+msgid "/dev/hda"
+msgstr "/dev/hda"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"These commands you can also use in the \"Printing command\" field of the "
-"printing dialogs of many applications, but here do not supply the file name "
-"because the file to print is provided by the application.\n"
-msgstr ""
+msgid "/dev/hdb"
+msgstr "/dev/hdb"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"To print a file from the command line (terminal window) you can either use "
-"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
-"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
-"to modify the option settings easily.\n"
+"Runs commands scheduled by the at command at the time specified when\n"
+"at was run, and runs batch commands when the load average is low enough."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "Did it work properly?"
+msgid "Radio support:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
+msgid "Installing SANE packages..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "boot disk creation"
+msgstr "สร้าง boot disk"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "LDAP"
 msgstr ""
-"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
-"กรุณารอสักครู่\n"
-"มันทำงานถูกต้องใหมครับ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../bootloader.pm:1
+#, c-format
+msgid "SILO"
+msgstr "SILO"
+
+#: ../../diskdrake/removable.pm:1
 #, fuzzy, c-format
+msgid "Change type"
+msgstr "เปลี่ยนประเภทพาร์ติชั่น"
+
+#: ../../any.pm:1
+#, c-format
+msgid "SILO Installation"
+msgstr "การติดตั้ง SILO"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use CD/DVDROM to backup"
+msgstr ""
+
+#: ../../install_messages.pm:1
+#, c-format
 msgid ""
-"Test page(s) have been sent to the printer.\n"
-"It may take some time before the printer starts.\n"
-"Printing status:\n"
+"Congratulations, installation is complete.\n"
+"Remove the boot media and press return to reboot.\n"
+"\n"
+"\n"
+"For information on fixes which are available for this release of Mandrake "
+"Linux,\n"
+"consult the Errata available from:\n"
+"\n"
+"\n"
 "%s\n"
 "\n"
+"\n"
+"Information on configuring your system is available in the post\n"
+"install chapter of the Official Mandrake Linux User's Guide."
 msgstr ""
-"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
-"กรุณารอสักครู่\n"
-"สถานะการพิมพ์:\n"
+"ขอแสดงความยินดี การติดตั้งเสร็จเรียบร้อย\n"
+"ให้เอาสื่อที่ใช้บูตออกจากไดรว์ (แผ่นฟล้อปปี้หรือซีดี) กดปุ่ม reboot เพื่อรีบูต\n"
+"\n"
+"\n"
+"สำหรับท่านที่ต้องการข้อมูลสำหรับการแก้ไขกับ ลีนุกซ์-แมนเดรก\n"
+"โปรดอ่าน Errata ได้ที่ \n"
+"\n"
+"\n"
 "%s\n"
 "\n"
-"มันทำงานถูกต้องใหมครับ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do not print any test page"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Photo test page"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+"\n"
+"ข้อมูลสำหรับการคอนฟิกระบบของคุณ สามารถหาได้จากช่วง\n"
+"บทหลังจากการติดตั้งของคู่มือแนะนำผู้ใช้งานลีนุกซ์-แมนเดรกฉบับเป็นทางการ"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Alternative test page (A4)"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+msgid "paranoid"
+msgstr "Paranoid"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Alternative test page (Letter)"
+msgid "Send mail report after each backup to:"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Standard test page"
-msgstr "เครื่องมีอ Standard"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Print"
-msgstr "เครื่องพิมพ์"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No test pages"
-msgstr "ใช้ ให้พิมพ์กระดาษทดสอบทั้งสองแบบ"
-
-#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please select the test pages you want to print.\n"
-"Note: the photo test page can take a rather long time to get printed and on "
-"laser printers with too low memory it can even not come out. In most cases "
-"it is enough to print the standard test page."
+"This command you can also use in the \"Printing command\" field of the "
+"printing dialogs of many applications. But here do not supply the file name "
+"because the file to print is provided by the application.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Test pages"
-msgstr "กำลังตรวจสอบพอร์ต"
+#: ../../Xconfig/main.pm:1 ../../Xconfig/resolution_and_depth.pm:1
+#, c-format
+msgid "Resolution"
+msgstr "ขนาดจอภาพ"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
 msgid ""
-"Do you want to set this printer (\"%s\")\n"
-"as the default printer?"
-msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
+"To print to a SMB printer, you need to provide the SMB host name (Note! It "
+"may be different from its TCP/IP hostname!) and possibly the IP address of "
+"the print server, as well as the share name for the printer you wish to "
+"access and any applicable user name, password, and workgroup information."
+msgstr ""
+"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ SMB ได้ คุณจะต้องใส่ข้อมูลของชื่อโฮสต์ที่\n"
+"เป็น SMB (โปรดสังเกตุว่า ชื่อโฮสต์แบบ SMB อาจแตกต่างจากชื่อโฮสต์\n"
+"แบบ TCP/IP) และข้อมูลค่า IP แอดเดรสของพรินต์เซิร์ฟเวอร์ รวมทั้ง\n"
+"ชื่อของเครื่องพิมพ์ที่ต้องการใช้ (share name) และชื่อของผู้ใช้ (username)\n"
+"รหัสผ่าน (password) และข้อมูลของเวิร์คกรุ๊ป (workgroup) ด้วย"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Option %s out of range!"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Accept/Refuse icmp echo."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Option %s must be a number!"
-msgstr ""
+msgid "reconfigure"
+msgstr "คอนฟิกใหม่"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Option %s must be an integer number!"
+msgid ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 msgstr ""
+"Your card can have 3D hardware acceleration support with XFree %s,\n"
+"NOTE THIS IS EXPERIMENTAL SUPPORT AND MAY FREEZE YOUR COMPUTER."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Printer default settings"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Xinetd Service"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Printer default settings\n"
-"\n"
-"You should make sure that the page size and the ink type/printing mode (if "
-"available) and also the hardware configuration of laser printers (memory, "
-"duplex unit, extra trays) are set correctly. Note that with a very high "
-"printout quality/resolution printing can get substantially slower."
+msgid "access to network tools"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10162,556 +9984,548 @@ msgstr ""
 msgid "Firmware-Upload for HP LaserJet 1000"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
 msgid ""
-"To be able to print with your Lexmark inkjet and this configuration, you "
-"need the inkjet printer drivers provided by Lexmark (http://www.lexmark."
-"com/). Click on the \"Drivers\" link. Then choose your model and afterwards "
-"\"Linux\" as operating system. The drivers come as RPM packages or shell "
-"scripts with interactive graphical installation. You do not need to do this "
-"configuration by the graphical frontends. Cancel directly after the license "
-"agreement. Then print printhead alignment pages with \"lexmarkmaintain\" and "
-"adjust the head alignment settings with this program."
+"And, of course, push multimedia to its limits with the very latest software "
+"to play videos, audio files and to handle your images or photos."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Lexmark inkjet configuration"
-msgstr "การคอนฟิก Internet"
+#, c-format
+msgid "Here is a list of all auto-detected printers. "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The inkjet printer drivers provided by Lexmark only support local printers, "
-"no printers on remote machines or print server boxes. Please connect your "
-"printer to a local port or configure it on the machine where it is connected "
-"to."
+"Error installing aboot, \n"
+"try to force installation even if that destroys the first partition?"
 msgstr ""
+"การติดตั้ง aboot ล้มเหลว\n"
+"พยายามติดตั้งถึงแม้พาติชั่นแรกอาจจะเสียหาย?"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You are configuring an OKI laser winprinter. These printers\n"
-"use a very special communication protocol and therefore they work only when "
-"connected to the first parallel port. When your printer is connected to "
-"another port or to a print server box please connect the printer to the "
-"first parallel port before you print a test page. Otherwise the printer will "
-"not work. Your connection type setting will be ignored by the driver."
+"Options Description:\n"
+"\n"
+" In this step Drakbackup allow you to change:\n"
+"\n"
+" - The compression mode:\n"
+"    \n"
+"      If you check bzip2 compression, you will compress\n"
+"      your data better than gzip (about 2-10 %%).\n"
+"      This option is not checked by default because\n"
+"      this compression mode needs more time (about 1000%% more).\n"
+" \n"
+" - The update mode:\n"
+"\n"
+"      This option will update your backup, but this\n"
+"      option is not really useful because you need to\n"
+"      decompress your backup before you can update it.\n"
+"      \n"
+" - the .backupignore mode:\n"
+"\n"
+"      Like with cvs, Drakbackup will ignore all references\n"
+"      included in .backupignore files in each directories.\n"
+"      ex: \n"
+"         #> cat .backupignore\n"
+"         *.o\n"
+"         *~\n"
+"         ...\n"
+"      \n"
+"\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "OKI winprinter configuration"
-msgstr "การคอนฟิก Internet"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
 msgid ""
-"If your printer is not listed, choose a compatible (see printer manual) or a "
-"similar one."
-msgstr ""
+"Restore Selected\n"
+"Files"
+msgstr "ลบคิว"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
+"%s exists, delete?\n"
 "\n"
-"\n"
-"Please check whether Printerdrake did the auto-detection of your printer "
-"model correctly. Find the correct model in the list when a wrong model or "
-"\"Raw printer\" is highlighted."
+"Warning: If you've already done this process you'll probably\n"
+" need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Which printer model do you have?"
-msgstr "คุณมีเครื่องพิมพ์ชนิดใด?"
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Please fill or check the field below"
+msgstr "กรุณาเลือกช่องข้างล่างนี้"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Printer model selection"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Do you want to save /etc/fstab modifications"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Reading printer database..."
-msgstr "อ่าน CUPS drivers database..."
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Boot Protocol"
+msgstr "Boot Protocol"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Select model manually"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "LVM-disks %s\n"
+msgstr "LVM-disks %s\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "The model is correct"
-msgstr "ถูกต้องหรือไม่?"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Printerdrake has compared the model name resulting from the printer auto-"
-"detection with the models listed in its printer database to find the best "
-"match. This choice can be wrong, especially when your printer is not listed "
-"at all in the database. So check whether the choice is correct and click "
-"\"The model is correct\" if so and if not, click \"Select model manually\" "
-"so that you can choose your printer model manually on the next screen.\n"
-"\n"
-"For your printer Printerdrake has found:\n"
-"\n"
-"%s"
+msgid "The package %s is needed. Install it?"
 msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Your printer model"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+#: ../../services.pm:1
+#, c-format
+msgid "On boot"
+msgstr "ขณะ boot"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Preparing printer database..."
-msgstr "อ่าน CUPS drivers database..."
+msgid "Bus identification"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
 #, c-format
-msgid "Location"
-msgstr "ตำแหน่ง"
+msgid "Please make a backup of your data first"
+msgstr "กรุณาทำ backup ก่อน"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
-#, c-format
-msgid "Description"
-msgstr "รายละเอียด"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Vatican"
+msgstr "ตำแหน่ง"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Name of printer"
-msgstr "ชื่อเครื่องพิมพ์"
+msgid "You have more than one hard drive, which one do you install linux on?"
+msgstr "คุณมี harddisk มากกว่า  1 ตัว  คุณต้องการลง linux บน harddisk ตัวใหน"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Every printer needs a name (for example \"printer\"). The Description and "
-"Location fields do not need to be filled in. They are comments for the users."
+msgid "Boot ISO"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Enter Printer Name and Comments"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Eritrea"
+msgstr "ส่วนของผู้เชี่ยวชาญ"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Making printer port available for CUPS..."
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove List"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../share/advertising/05-desktop.pl:1
 #, c-format
-msgid "Checking device and configuring HPOJ..."
+msgid "A customizable environment"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Photo memory card access on your HP multi-function device"
+msgid "Inuktitut"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Scanning on your HP multi-function device"
+msgid "Morocco"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Installing mtools packages..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Installing SANE packages..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
+msgid "Which printer model do you have?"
+msgstr "คุณมีเครื่องพิมพ์ชนิดใด?"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Installing HPOJ package..."
-msgstr "กำลังติดตั้งแพ็คเก็จ %s"
-
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
-"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
-"PhotoSmart or an HP LaserJet 2200?"
-msgstr ""
+msgid "Add a new printer"
+msgstr "ไม่มีเครื่องพิมพ์"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "A command line must be entered!"
+msgid "          All of your selected data have been          "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Command line"
-msgstr "ชื่อโดเมน"
+msgid "<-- Delete"
+msgstr "ลบ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Here you can specify any arbitrary command line into which the job should be "
-"piped instead of being sent directly to a printer."
+msgid "Nepal"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Pipe into command"
+msgid "cpu # "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected model: %s %s"
-msgstr "ค้นพบ %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "chunk size"
+msgstr "ขนาดของ chunk"
 
-#: ../../printer/printerdrake.pm:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "A valid URI must be entered!"
-msgstr ""
+msgid "commands before booting, or 'c' for a command-line."
+msgstr "คำสั่งก่อน boot, หรือ 'c' ถ้าต้องการ command-line."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Printer Device URI"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+msgid "Problems installing package %s"
+msgstr "ปัญหาการติดตั้งแพ็คเก็จ %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"You can specify directly the URI to access the printer. The URI must fulfill "
-"either the CUPS or the Foomatic specifications. Note that not all URI types "
-"are supported by all the spoolers."
+msgid "You will receive an alert if the load is higher than this value"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Port"
-msgstr "Port"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP"
-msgstr "ชื่อของเครื่องพิมพ์"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The port number should be an integer!"
-msgstr "Port number ควรเป็นตัวเลข"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer host name or IP missing!"
-msgstr "ชื่อของเครื่องพิมพ์"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
 msgid ""
-"To print to a TCP or socket printer, you need to provide the host name or IP "
-"of the printer and optionally the port number (default is 9100). On HP "
-"JetDirect servers the port number is usually 9100, on other servers it can "
-"vary. See the manual of your hardware."
+"\n"
+"\n"
+"To submit a bug report, click on the button report.\n"
+"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
+" where you'll find a form to fill in.The information displayed above will "
+"be \n"
+"transferred to that server\n"
+"\n"
 msgstr ""
-"To print to a socket printer, you need to provide the\n"
-"hostname of the printer and optionally the port number."
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"Choose one of the auto-detected printers from the list or enter the hostname "
-"or IP and the optional port number (default is 9100) in the input fields."
+msgid "Add a scanner manually"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "TCP/Socket Printer Options"
-msgstr "อ็อปชั่นของเครื่องพิมพ์โลคอล"
+msgid "Reload partition table"
+msgstr "กู้ตารางพาร์ติชั่น"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Host \"%s\", port %s"
+msgid "Yes, I want autologin with this (user, desktop)"
+msgstr "ใช่แล้ว ผมต้องการ autologin สำหรับผู้ใช้รายนี้"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Search for fonts in installed list"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ", host \"%s\", port %s"
+msgid "The Local Network did not finish with `.0', bailing out."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Scanning network..."
-msgstr "ทดสอบ connection..."
+msgid "Boot"
+msgstr "Root"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "Printer auto-detection"
-msgstr "ใช้ auto detection"
+msgid "Tuner type:"
+msgstr "เปลี่ยนประเภทพาร์ติชั่น"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1
 #, c-format
-msgid "NCP queue name missing!"
+msgid ""
+"Now, it's time to select a printing system for your computer. Other OSs may\n"
+"offer you one, but Mandrake Linux offers two. Each of the printing system\n"
+"is best suited to particular types of configuration.\n"
+"\n"
+" * \"%s\" -- which is an acronym for ``print, don't queue'', is the choice\n"
+"if you have a direct connection to your printer, you want to be able to\n"
+"panic out of printer jams, and you do not have networked printers. (\"%s\"\n"
+"will handle only very simple network cases and is somewhat slow when used\n"
+"with networks.) It's recommended that you use \"pdq\" if this is your first\n"
+"experience with GNU/Linux.\n"
+"\n"
+" * \"%s\" - `` Common Unix Printing System'', is an excellent choice for\n"
+"printing to your local printer or to one halfway around the planet. It is\n"
+"simple to configure and can act as a server or a client for the ancient\n"
+"\"lpd \" printing system, so it compatible with older operating systems\n"
+"which may still need print services. While quite powerful, the basic setup\n"
+"is almost as easy as \"pdq\". If you need to emulate a \"lpd\" server, make\n"
+"sure you turn on the \"cups-lpd \" daemon. \"%s\" includes graphical\n"
+"front-ends for printing or choosing printer options and for managing the\n"
+"printer.\n"
+"\n"
+"If you make a choice now, and later find that you don't like your printing\n"
+"system you may change it by running PrinterDrake from the Mandrake Control\n"
+"Center and clicking the expert button."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "NCP server name missing!"
+msgid "\"Menu\" key"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Print Queue Name"
-msgstr "ชื่อพรินต์คิว"
+msgid ""
+"\n"
+"\n"
+"Please check whether Printerdrake did the auto-detection of your printer "
+"model correctly. Find the correct model in the list when a wrong model or "
+"\"Raw printer\" is highlighted."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "Printer Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Security Administrator:"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid ""
-"To print on a NetWare printer, you need to provide the NetWare print server "
-"name (Note! it may be different from its TCP/IP hostname!) as well as the "
-"print queue name for the printer you wish to access and any applicable user "
-"name and password."
-msgstr ""
-"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ในระบบเน็ตแวร์ คุณจะต้องป้อนข้อมูล\n"
-"ของชื่อพรินต์เซิร์ฟเวอร์ในระบบเน็ตแวร์ (ชื่อที่ป้อนเข้าไปอาจไม่ใช่ชื่อของ\n"
-"โฮสต์แบบ TCP/IP) และข้อมูลชื่อคิวของเครื่องพิมพ์ที่ต้องการใช้\n"
-"รวมทั้งชื่อผู้ใช้และรหัสผ่านด้วย"
+msgid "Please enter your login"
+msgstr "โปรดลองอีกครั้ง"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "NetWare Printer Options"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์ในระบบเน็ตแวร์"
+msgid "if set to yes, check permissions of files in the users' home."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Connect your printer to a Linux server and let your Windows machine(s) "
-"connect to it as a client.\n"
-"\n"
-"Do you really want to continue setting up this printer as you are doing now?"
+"You don't have an Internet connection.\n"
+"Create one first by clicking on 'Configure'"
 msgstr ""
 
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Fonts copy"
+msgstr "ฟอร์แมต Floppy"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Automated"
+msgstr "อัตโนมัติ"
+
+#: ../../Xconfig/test.pm:1
+#, c-format
+msgid "Do you want to test the configuration?"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Set up your Windows server to make the printer available under the IPP "
-"protocol and set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
-"\n"
+"The printer \"%s\" was successfully removed from Star Office/OpenOffice.org/"
+"GIMP."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/draksec:1
 #, c-format
 msgid ""
-"You are about to set up printing to a Windows account with password. Due to "
-"a fault in the architecture of the Samba client software the password is put "
-"in clear text into the command line of the Samba client used to transmit the "
-"print job to the Windows server. So it is possible for every user on this "
-"machine to display the password on the screen by issuing commands as \"ps "
-"auxwww\".\n"
+"Standard: This is the standard security recommended for a computer that will "
+"be used to connect\n"
+"               to the Internet as a client.\n"
 "\n"
-"We recommend to make use of one of the following alternatives (in all cases "
-"you have to make sure that only machines from your local network have access "
-"to your Windows server, for example by means of a firewall):\n"
+"High:       There are already some restrictions, and more automatic checks "
+"are run every night.\n"
 "\n"
-"Use a password-less account on your Windows server, as the \"GUEST\" account "
-"or a special account dedicated for printing. Do not remove the password "
-"protection from a personal account or the administrator account.\n"
+"Higher:    The security is now high enough to use the system as a server "
+"which can accept\n"
+"              connections from many clients. If your machine is only a "
+"client on the Internet, you\n"
+"           should choose a lower level.\n"
 "\n"
-"Set up your Windows server to make the printer available under the LPD "
-"protocol. Then set up printing from this machine with the \"%s\" connection "
-"type in Printerdrake.\n"
+"Paranoid:  This is similar to the previous level, but the system is entirely "
+"closed and security\n"
+"                features are at their maximum\n"
 "\n"
+"Security Administrator:\n"
+"               If the 'Security Alerts' option is set, security alerts will "
+"be sent to this user (username or\n"
+"            email)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "SECURITY WARNING!"
-msgstr ""
+msgid "Save packages selection"
+msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Remove the last item"
+msgstr "ฟอร์แมต loopback file %s"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Samba share name missing!"
+msgid "User list to restore (only the most recent date per user is important)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Either the server name or the server's IP must be given!"
+msgid "No net boot images created!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Auto-detected"
-msgstr "ใช้ auto detection"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "Workgroup"
-msgstr "เวิร์กกรุ๊ป (workgroup)"
+msgid "use pptp"
+msgstr "ใช้ pptp"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
-msgid "Share name"
-msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+msgid "Choose which services should be automatically started at boot time"
+msgstr "เลือกการบริการที่ต้องการให้เริ่มตั้งแต่การเริ่มทำงานของเครื่อง"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server IP"
-msgstr "ค่า IP ของ SMB เซิร์ฟเวอร์"
+#, fuzzy, c-format
+msgid "Learn how to use this printer"
+msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "SMB server host"
-msgstr "ชื่อโฮสต์ของ SMB server"
+#, fuzzy, c-format
+msgid "Configure the network now"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-" If the desired printer was auto-detected, simply choose it from the list "
-"and then add user name, password, and/or workgroup if needed."
-msgstr ""
+msgid "Choose a mirror from which to get the packages"
+msgstr "เลือกมิลเรอร์ไซต์ที่จะใช้ในการดาวน์โหลดแพ็คเก็จ"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../install_interactive.pm:1
+#, c-format
 msgid ""
-"To print to a SMB printer, you need to provide the SMB host name (Note! It "
-"may be different from its TCP/IP hostname!) and possibly the IP address of "
-"the print server, as well as the share name for the printer you wish to "
-"access and any applicable user name, password, and workgroup information."
+"The FAT resizer is unable to handle your partition, \n"
+"the following error occured: %s"
 msgstr ""
-"เพื่อให้คุณสามารถใช้เครื่องพิมพ์ SMB ได้ คุณจะต้องใส่ข้อมูลของชื่อโฮสต์ที่\n"
-"เป็น SMB (โปรดสังเกตุว่า ชื่อโฮสต์แบบ SMB อาจแตกต่างจากชื่อโฮสต์\n"
-"แบบ TCP/IP) และข้อมูลค่า IP แอดเดรสของพรินต์เซิร์ฟเวอร์ รวมทั้ง\n"
-"ชื่อของเครื่องพิมพ์ที่ต้องการใช้ (share name) และชื่อของผู้ใช้ (username)\n"
-"รหัสผ่าน (password) และข้อมูลของเวิร์คกรุ๊ป (workgroup) ด้วย"
+"ตัวเปลี่ยนขนาดไม่สามารถทำงานกับ partition ของคุณ\n"
+"มีข้อผิดพลาดนี้เกิดขึ้น: %s"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "SMB (Windows 9x/NT) Printer Options"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบ SMB (เครื่องพิมพ์ในระบบวินโดวส์ 9x/NT)"
+msgid "Which sector do you want to move it to?"
+msgstr "คุณต้องการย้ายไปเซ็กเตอร์ไหน"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "Printer \"%s\" on server \"%s\""
-msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+msgid "Do you want to click on this button?"
+msgstr "คุณต้องการใช้ aboot หรือไม่"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ", printer \"%s\" on server \"%s\""
+msgid "Bahamas"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remote printer name missing!"
-msgstr "ชื่อโฮสต์รีโมท"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name missing!"
-msgstr "ชื่อโฮสต์รีโมท"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote printer name"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Manual configuration"
+msgstr "การคอนฟิก"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remote host name"
-msgstr "ชื่อโฮสต์รีโมท"
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "search"
+msgstr "ค้นหา"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"To use a remote lpd printer, you need to supply the hostname of the printer "
-"server and the printer name on that server."
+"This package loads the selected keyboard map as set in\n"
+"/etc/sysconfig/keyboard.  This can be selected using the kbdconfig utility.\n"
+"You should leave this enabled for most machines."
 msgstr ""
-"หากคุณต้องการใช้คิวเครื่องพิมพ์แบบรีโมท คุณจะต้องป้อนข้อมูล\n"
-"ของชื่อโฮสต์ที่ให้บริการเครื่องพิมพ์นั้น และชื่อคิวของเซิร์ฟเวอร์นั้น\n"
-"ซึ่งเป็นที่ๆงานพิมพ์จะถูกเก็บไว้"
+"แพกเกจนี้จะเรียกใช้ keyboard map ตามที่ระบุอยู่ใน \n"
+"/etc/sysconfig/keyboard  ซึ่งสามรถเลือกได้โดยใช้ kbdconfig\n"
+"คุณควรปล่อยให้มันทำงานในเครื่องทั่วไป"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Remote lpd Printer Options"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Manual configuration"
-msgstr "การคอนฟิก"
+msgid "Xpmac (installation display driver)"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must choose/enter a printer/device!"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
+#, c-format
+msgid "Zeroconf host name must not contain a ."
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
-"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
+"Syslog is the facility by which many daemons use to log messages\n"
+"to various system log files.  It is a good idea to always run syslog."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/data.pm:1 ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Please choose the port that your printer is connected to."
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid "Unknown/Others"
+msgstr "Generic"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Please choose the port that your printer is connected to or enter a device "
-"name/file name in the input line"
+msgid "No TV Card detected!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/main.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/interactive.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, fuzzy, c-format
-msgid "Please choose the printer to which the print jobs should go."
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid "Options"
+msgstr "/Options/ทดลอง"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Please choose the printer you want to set up. The configuration of the "
-"printer will work fully automatically. If your printer was not correctly "
-"detected or if you prefer a customized printer configuration, turn on "
-"\"Manual configuration\"."
+msgid "The printer \"%s\" is set as the default printer now."
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Here is a list of all auto-detected printers. "
+msgid ""
+"You are configuring an OKI laser winprinter. These printers\n"
+"use a very special communication protocol and therefore they work only when "
+"connected to the first parallel port. When your printer is connected to "
+"another port or to a print server box please connect the printer to the "
+"first parallel port before you print a test page. Otherwise the printer will "
+"not work. Your connection type setting will be ignored by the driver."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Currently, no alternative possibility is available"
+msgid "generation of the cpu (eg: 8 for PentiumIII, ...)"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"The configuration of the printer will work fully automatically. If your "
-"printer was not correctly detected or if you prefer a customized printer "
-"configuration, turn on \"Manual configuration\"."
-msgstr ""
+#, fuzzy, c-format
+msgid "Auto-detected"
+msgstr "ใช้ auto detection"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakpxe:1
 #, fuzzy, c-format
-msgid "The following printer was auto-detected. "
-msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
+msgid ""
+"You are about to configure your computer to install a PXE server as a DHCP "
+"server\n"
+"and a TFTP server to build an installation server.\n"
+"With that feature, other computers on your local network will be installable "
+"using this computer as source.\n"
+"\n"
+"Make sure you have configured your Network/Internet access using drakconnect "
+"before going any further.\n"
+"\n"
+"Note: you need a dedicated Network Adapter to set up a Local Area Network "
+"(LAN)."
+msgstr ""
+"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
+"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
+"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
+"\n"
+"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"Please choose the printer to which the print jobs should go or enter a "
-"device name/file name in the input line"
+"No free space for 1MB bootstrap! Install will continue, but to boot your "
+"system, you'll need to create the bootstrap partition in DiskDrake"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
@@ -10721,944 +10535,872 @@ msgid ""
 "name in the input line"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Alternatively, you can specify a device name/file name in the input line"
-msgstr ""
+msgid "Refuse"
+msgstr "ไม่ยอมรับ"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "HFS"
+msgstr "HFS"
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"If it is not the one you want to configure, enter a device name/file name in "
-"the input line"
+"HardDrake runs a hardware probe, and optionally configures\n"
+"new/changed hardware."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Available printers"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Remote Printers"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "No printer found!"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+#: ../../fs.pm:1
+#, c-format
+msgid "Creating and formatting file %s"
+msgstr "กำลังสร้างและ format ไฟล์ %s"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "You must enter a device or file name!"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, check additions/removals of sgid files."
+msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"No local printer found! To manually install a printer enter a device name/"
-"file name in the input line (Parallel Ports: /dev/lp0, /dev/lp1, ..., "
-"equivalent to LPT1:, LPT2:, ..., 1st USB printer: /dev/usb/lp0, 2nd USB "
-"printer: /dev/usb/lp1, ...)."
+"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
+"on. Download the Windows driver package from the HP web site (the firmware "
+"on the printer's CD does not work) and extract the firmware file from it by "
+"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
+"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
+"printer' directory. There it will be found by the automatic uploader script "
+"and uploaded whenever the printer is connected and turned on.\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Local Printer"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Choose an existing LVM to add to"
+msgstr "เลือก LVM ที่มีอยู่เพื่อเพิ่มเข้าไป"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "USB printer \\#%s"
-msgstr "ไม่มีเครื่องพิมพ์"
+msgid "xfs restart"
+msgstr "จำเพาะ"
 
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer on parallel port \\#%s"
-msgstr "ชื่อของเครื่องพิมพ์"
+#, c-format
+msgid ""
+"The printer \"%s\" already exists,\n"
+"do you really want to overwrite its configuration?"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/วินโดวส์ 95/98/NT"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "No partition available"
+msgstr "ไม่มีพาร์ติชั่นเหลือ"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Network printer \"%s\", port %s"
-msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Use the scanners on hosts: "
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Detected %s"
-msgstr "ค้นพบ %s"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Unselected All"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid ", printer \"%s\" on SMB/Windows server \"%s\""
-msgstr "SMB/วินโดวส์ 95/98/NT"
+msgid "Domain Name Resolver"
+msgstr "ชื่อโดเมน"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ", network printer \"%s\", port %s"
+msgid "Encryption key (again)"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"\n"
-"Congratulations, your printer is now installed and configured!\n"
-"\n"
-"You can print using the \"Print\" command of your application (usually in "
-"the \"File\" menu).\n"
-"\n"
-"If you want to add, remove, or rename a printer, or if you want to change "
-"the default option settings (paper input tray, printout quality, ...), "
-"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
-"Center."
+msgid "Samba share name missing!"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Auto-detect printers connected to machines running Microsoft Windows"
+msgid "True Type install done"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Detection in progress"
+msgstr "ค้นหาเจอบน port %s"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Auto-detect printers connected directly to the local network"
+msgid "Build Whole Kernel -->"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps.pm:1
+#, c-format
+msgid "Welcome to %s"
+msgstr "ยินดีต้อนรับสู่ %s"
+
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Auto-detect printers connected to this machine"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Please insert the Update Modules floppy in drive %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
+msgid "Bootsplash"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
+#, fuzzy, c-format
 msgid ""
+"The following printer\n"
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer or connected directly to the network.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) must be connected and turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network printers when you don't need it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+"%s%s\n"
+"is directly connected to your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
 
 #: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard will help you to install your printer(s) connected to this "
-"computer, connected directly to the network or to a remote Windows machine.\n"
-"\n"
-"If you have printer(s) connected to this machine, Please plug it/them in on "
-"this computer and turn it/them on so that it/they can be auto-detected. Also "
-"your network printer(s) and your Windows machines must be connected and "
-"turned on.\n"
-"\n"
-"Note that auto-detecting printers on the network takes longer than the auto-"
-"detection of only the printers connected to this machine. So turn off the "
-"auto-detection of network and/or Windows-hosted printers when you don't need "
-"it.\n"
-"\n"
-" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
-"to set up your printer(s) now."
-msgstr ""
+#, fuzzy, c-format
+msgid "Printer sharing on hosts/networks: "
+msgstr "เครื่องพิมพ์"
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"Welcome to the Printer Setup Wizard\n"
-"\n"
-"This wizard allows you to install local or remote printers to be used from "
-"this machine and also from other machines in the network.\n"
-"\n"
-"It asks you for all necessary information to set up the printer and gives "
-"you access to all available printer drivers, driver options, and printer "
-"connection types."
+"The \"%s\" command also allows to modify the option settings for a "
+"particular printing job. Simply add the desired settings to the command "
+"line, e. g. \"%s <file>\". "
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
 msgid ""
-"\n"
-"\n"
-"Printerdrake could not determine which model your printer %s is. Please "
-"choose the correct model from the list."
+"In some cases, the %s driver needs to have extra information to work\n"
+"properly, although it normally works fine without them. Would you like to "
+"specify\n"
+"extra options for it or allow the driver to probe your machine for the\n"
+"information it needs? Occasionally, probing will hang a computer, but it "
+"should\n"
+"not cause any damage."
 msgstr ""
+"ในบางกรณี สำหรับไดรเวอร์ %s จะจำเป็นต้องใช้ข้อมูลเพิ่มเติมเพื่อ\n"
+"ให้สามารถทำงานได้ถูกต้อง แม้ว่าไดรเวอร์อาจทำงานได้โดยปกติ โดยปราศจาก\n"
+"ข้อมูลดังกล่าว   คุณต้องการจะระบุอ๊อปชั่นเพิ่มเติมพิเศษหรือให้โปรแกรมทำการ\n"
+"ตรวจหาข้อมูลที่จำเป็นต้องใช้? ในบางกรณีการตรวจหาอาจทำให้คอมพิวเตอร์แฮงค์\n"
+"แต่จะไม่เป็นอันตรายกับคอมพิวเตอร์"
 
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ")"
+msgid "Not the correct CD label. Disk is labelled %s."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid " on "
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid ""
+"Welcome to the Internet Connection Sharing utility!\n"
+"\n"
+"%s\n"
+"\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"ยินดีต้อนรับสู่เครื่องมือในการติดต่อ internet แบบ share\n"
+"\n"
+"%s\n"
+"\n"
+"กด ``Ok'' ถ้าคุณต้องการเริ่มการทำงานของ setup wizard"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "("
+msgid "Cuba"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Configuring printer ..."
-msgstr "การคอนฟิกเครื่องพิมพ์"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
 msgid "Searching for new printers..."
 msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"NOTE: Depending on the printer model and the printing system up to %d MB of "
-"additional software will be installed."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Belize"
+msgstr "เปลี่ยนขนาด"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Are you sure that you want to set up printing on this machine?\n"
+msgid " (multi-session)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on the printers mentioned above?\n"
-msgstr "คุณต้องการต่อตอน boot หรือไม่"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Do you want to enable printing on printers in the local network?\n"
-msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
+#: ../../any.pm:1
+#, c-format
+msgid "Kernel Boot Timeout"
+msgstr "Kernel Boot Timeout"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
 msgid ""
-"Do you want to enable printing on the printers mentioned above or on "
-"printers in the local network?\n"
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 msgstr ""
+"Your card can have 3D hardware acceleration support but only with XFree %s.\n"
+"Your card is supported by XFree %s which may have a better support in 2D."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid " (Make sure that all your printers are connected and turned on).\n"
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "The DrakX Partitioning wizard found the following solutions:"
+msgstr "The DrakX Partitioning wizard เจอทางเลือกดังต่อไปนี้"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"There are no printers found which are directly connected to your machine"
-msgstr ""
+msgid "Hungarian"
+msgstr "อังการี"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"\n"
-"There are %d unknown printers directly connected to your system"
+"Select your provider.\n"
+"If it isn't listed, choose Unlisted."
 msgstr ""
+"เลือกผู้ให้บริการ\n"
+"ถ้าไม่มีเลือก ไม่มี (unlisted)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"There is one unknown printer directly connected to your system"
+msgid "Automatic time synchronization (using NTP)"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"is directly connected to your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "8 MB"
+msgstr "8 MB"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid ""
-"The following printer\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+msgid "LDAP Server"
+msgstr "เซิร์ฟเวอร์ NIS"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
+#: ../../services.pm:1
+#, c-format
 msgid ""
-"The following printers\n"
-"\n"
-"%s%s\n"
-"are directly connected to your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and %d unknown printers"
-msgstr "ไม่มีเครื่องพิมพ์"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "and one unknown printer"
-msgstr "ไม่มีเครื่องพิมพ์"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Checking your system..."
-msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
+"PCMCIA support is usually to support things like ethernet and\n"
+"modems in laptops.  It won't get started unless configured so it is safe to "
+"have\n"
+"it installed on machines that don't need it."
+msgstr ""
+"PCMCIA สนับสนุนการทำงานของอุปกรณ์หลายๆอย่างเช่น\n"
+"ethernet หรือ modem ในคอมพิวเตอร์แบบพกพา"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../network/tools.pm:1
 #, fuzzy, c-format
-msgid "Restarting CUPS..."
-msgstr "จำเพาะ"
+msgid "Choose your country"
+msgstr "เลือกคีย์บอร์ด"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This server is already in the list, it cannot be added again.\n"
+msgid ""
+"\n"
+"- System Files:\n"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid "Examples for correct IPs:\n"
+msgid "Standalone Tools"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "The entered IP is not correct.\n"
-msgstr "ถูกต้องหรือไม่?"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Server IP missing!"
-msgstr "ชื่อของเครื่องพิมพ์"
+msgid "Where"
+msgstr "Wheel"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "If no port is given, 631 will be taken as default."
-msgstr ""
+msgid "but not matching"
+msgstr "but not matching"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Enter IP address and port of the host whose printers you want to use."
+msgid ""
+"Here you can select an alternative driver (either OSS or ALSA) for your "
+"sound card (%s)."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Accessing printers on remote CUPS servers"
-msgstr "Remote CUPS server"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Configuring PCMCIA cards..."
+msgstr "กำลังคอนฟิกการ์ด PCMCIA..."
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected server"
-msgstr "ลบคิว"
+#: ../../common.pm:1
+#, c-format
+msgid "kdesu missing"
+msgstr "ไม่มี kdesu "
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Edit selected server"
-msgstr "ค้นพบ %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Encryption key"
+msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Add server"
-msgstr "เพิ่มผู้ใช้"
+#: ../../mouse.pm:1
+#, c-format
+msgid "Microsoft IntelliMouse"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Add here the CUPS servers whose printers you want to use. You only need to "
-"do this if the servers do not broadcast their printer information into the "
-"local network."
+msgid "Christmas Island"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "IP address of host/network:"
-msgstr ""
+msgid "Installation of bootloader failed. The following error occured:"
+msgstr "การติดตั้ง bootloader ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "This host/network is already in the list, it cannot be added again.\n"
+msgid "EIDE/SCSI channel"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The entered host/network IP is not correct.\n"
+msgid "Set this printer as the default"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Host/network IP address missing."
+msgid "partition %s"
+msgstr "พาร์ติชั่น %s"
+
+#: ../../security/level.pm:1
+#, c-format
+msgid "Paranoid"
+msgstr "Paranoid"
+
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "NIS"
+msgstr "ใช้ NIS"
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "<-- Del User"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Choose the network or host on which the local printers should be made "
-"available:"
+msgid "Location on the bus"
 msgstr ""
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Sharing of local printers"
+msgid "No printer found!"
 msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Remove selected host/network"
-msgstr "ลบคิว"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Edit selected host/network"
+msgid "the vendor name of the device"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Add host/network"
-msgstr ""
+msgid "Erase entire disk"
+msgstr "ลบ disk ทั้งหมด"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../printer/cups.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These are the machines and networks on which the locally connected printer"
-"(s) should be available:"
-msgstr ""
+msgid " (Default)"
+msgstr " (Default)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"When this option is turned on, on every startup of CUPS it is automatically "
-"made sure that\n"
-"\n"
-"- if LPD/LPRng is installed, /etc/printcap will not be overwritten by CUPS\n"
-"\n"
-"- if /etc/cups/cupsd.conf is missing, it will be created\n"
-"\n"
-"- when printer information is broadcasted, it does not contain \"localhost\" "
-"as the server name.\n"
+"Arguments: ()\n"
 "\n"
-"If some of these measures lead to problems for you, turn this option off, "
-"but then you have to take care of these points."
+"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
+"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
+"server\n"
+"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
+"server\n"
+"is used by chkconfig --add to decide to add a service if it is present in "
+"the file\n"
+"during the installation of packages."
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Automatic correction of CUPS configuration"
+msgid "Automatic reconfiguration"
 msgstr "Boot Style Configuration"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid ""
-"Turning on this allows to print plain text files in japanese language. Only "
-"use this function if you really want to print text in japanese, if it is "
-"activated you cannot print accentuated characters in latin fonts any more "
-"and you will not be able to adjust the margins, the character size, etc. "
-"This setting only affects printers defined on this machine. If you want to "
-"print japanese text on a printer set up on a remote machine, you have to "
-"activate this function on that remote machine."
+msgid "Receiving Speed:"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Japanese text printing mode"
-msgstr "คอนฟิกระบบเน็ตเวิร์ก"
-
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"To get access to printers on remote CUPS servers in your local network you "
-"only need to turn on the \"Automatically find available printers on remote "
-"machines\" option; the CUPS servers inform your machine automatically about "
-"their printers. All printers currently known to your machine are listed in "
-"the \"Remote printers\" section in the main window of Printerdrake. If your "
-"CUPS server(s) is/are not in your local network, you have to enter the IP "
-"address(es) and optionally the port number(s) here to get the printer "
-"information from the server(s)."
+msgid "Turks and Caicos Islands"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "None"
-msgstr "ทำเรียบร้อยแล้ว"
-
-#: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Additional CUPS servers: "
-msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
-
-#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "No remote machines"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "permissions"
+msgstr "พาร์ติชั่น %s"
 
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../interactive/newt.pm:1
 #: ../../printer/printerdrake.pm:1
-#, fuzzy, c-format
-msgid "Custom configuration"
-msgstr "การคอนฟิก"
+#, c-format
+msgid "<- Previous"
+msgstr "<- ก่อน"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Printer sharing on hosts/networks: "
-msgstr "เครื่องพิมพ์"
+msgid "Internet Connection Sharing configuration"
+msgstr "การเชื่อมต่อ Internet และการปรับแต่ง"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Automatically find available printers on remote machines"
-msgstr ""
+msgid "Toggle between flat and group sorted"
+msgstr "เปลี่ยนไปมาระหว่างการจัดเรียงแบบ flat หรือ group"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "The printers on this machine are available to other computers"
+msgid "Themes"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid ""
-"You can also decide here whether printers on remote machines should be "
-"automatically made available on this machine."
-msgstr ""
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Options: %s"
+msgstr "พาร์ติชั่น %s"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
 msgid ""
-"Here you can choose whether the printers connected to this machine should be "
-"accessable by remote machines and by which remote machines."
+"You are currently using %s as your boot manager.\n"
+"Click on Configure to launch the setup wizard."
 msgstr ""
+"ยินดีต้อนรับสู่เครื่องมือในการติดต่อ internet แบบ share\n"
+"\n"
+"%s\n"
+"\n"
+"กด ``Ok'' ถ้าคุณต้องการเริ่มการทำงานของ setup wizard"
 
 #: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "CUPS printer configuration"
+msgid "OKI winprinter configuration"
 msgstr "การคอนฟิก Internet"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Printer auto-detection (Local, TCP/Socket, and SMB printers)"
+msgid "Saint Helena"
 msgstr ""
 
-#: ../../printer/printerdrake.pm:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
+msgid "Security Level"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
 msgid ""
+"Some steps are not completed.\n"
 "\n"
-"Printers on remote CUPS servers do not need to be configured here; these "
-"printers will be automatically detected."
+"Do you really want to quit now?"
 msgstr ""
-"เวลาใช้ CUPS SERVER คุณไม่จำเป็นต้องปรับแต่งเครื่องพิมพ์\n"
-"ในตอนนี้  เครื่องพิมพ์จะถูกค้นหาเอง\n"
-"กรณีมีข้อสงสัย กรุณาเลือก \"Remote CUPS server\""
+"ขั้นตอนบางขั้นตอนไม่สมบูรณ์\n"
+"\n"
+"คุณต้องการออกจากการติดตั้งจริงๆหรือไม่?"
 
-#: ../../printer/printerdrake.pm:1
-#, c-format
-msgid "How is the printer connected?"
-msgstr "เครื่องพิมพ์เชื่อมต่ออย่างไร?"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Sudan"
+msgstr "SunOS"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Select Printer Connection"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Polish (qwertz layout)"
+msgstr "Polish (qwertz layout)"
 
-#: ../../printer/printerdrake.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"The HP LaserJet 1000 needs its firmware to be uploaded after being turned "
-"on. Download the Windows driver package from the HP web site (the firmware "
-"on the printer's CD does not work) and extract the firmware file from it by "
-"uncompresing the self-extracting '.exe' file with the 'unzip' utility and "
-"searching for the 'sihp1000.img' file. Copy this file into the '/etc/"
-"printer' directory. There it will be found by the automatic uploader script "
-"and uploaded whenever the printer is connected and turned on.\n"
+msgid "Syria"
 msgstr ""
 
-#: ../../security/help.pm:1
+# NOTE: this message will be displayed at boot time; that is
+# only the ascii charset will be available on most machines
+# so use only 7bit for this message (and do transliteration or
+# leave it in English, as it is the best for your language)
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#: ../../bootloader.pm:1
 #, c-format
 msgid ""
-"Arguments: (umask)\n"
+"Welcome to %s the operating system chooser!\n"
+"\n"
+"Choose an operating system from the list above or\n"
+"wait %d seconds for default boot.\n"
 "\n"
-"Set the user umask."
 msgstr ""
+"ยินดีต้อนรับสู่ %s โปรแกรมเลือกใช้ระบบปฏิบัติการ!\n"
+"\n"
+"เลือกระบบปฏิบัติการหรือ\n"
+"รอ %d วินาทีเพื่อใช้การบูตจากตัวเลือกตั้งต้น\n"
+"\n"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (val)\n"
-"\n"
-"Set the shell timeout. A value of zero means no timeout."
-msgstr ""
+msgid "Portuguese"
+msgstr "โปรตุเกส"
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (size)\n"
-"\n"
-"Set shell commands history size. A value of -1 means unlimited."
-msgstr ""
+msgid "Loopback file name: "
+msgstr "ชื่อ Loopback file: "
 
-#: ../../security/help.pm:1
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "DNS server address should be in format 1.2.3.4"
+msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Serbia"
+msgstr "พอร์ตอนุกรม"
+
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "if set to yes, check additions/removals of sgid files."
+msgid "Newzealand"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "if set to yes, check open ports."
-msgstr ""
+msgid "This directory should remain within the root filesystem"
+msgstr "This directory should remain within the root filesystem"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"if set, send the mail report to this email address else send it to root."
+msgid "CapsLock key"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../steps.pm:1
 #, c-format
-msgid "if set to yes, report check result by mail."
-msgstr ""
+msgid "Install bootloader"
+msgstr "ติดตั้งบูตโหลดเดอร์"
 
-#: ../../security/help.pm:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "if set to yes, check files/directories writable by everybody."
-msgstr ""
+msgid "Select the memory size of your graphics card"
+msgstr "เลือกขนาดหน่วยความจำของกราฟฟิคการ์ด"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, reports check result to tty."
+msgid ""
+"[OPTIONS]\n"
+"Network & Internet connection and monitoring application\n"
+"\n"
+"--defaultintf interface : show this interface by default\n"
+"--connect : connect to internet if not already connected\n"
+"--disconnect : disconnect to internet if already connected\n"
+"--force : used with (dis)connect : force (dis)connection.\n"
+"--status : returns 1 if connected 0 otherwise, then exit.\n"
+"--quiet : don't be interactive. To be used with (dis)connect."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "if set to yes, run some checks against the rpm database."
+msgid "Dynamic IP Address Pool:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "if set to yes, check if the network devices are in promiscuous mode."
-msgstr ""
+msgid "LVM name?"
+msgstr "ชื่อ LVM"
 
-#: ../../security/help.pm:1
+#: ../../standalone/service_harddrake:1
 #, c-format
-msgid "if set to yes, run chkrootkit checks."
+msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "if set to yes, check permissions of files in the users' home."
-msgstr ""
+msgid "Found %s %s interfaces"
+msgstr "ตรวจพบ %s อินเทอร์เฟส %s"
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "if set to yes, check additions/removals of suid root files."
+msgid "sticky-bit"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Post Install"
+msgstr "ติดตั้ง"
+
+#: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "The internal domain name"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "if set to yes, report check result to syslog."
-msgstr ""
+msgid "Card IRQ"
+msgstr "Card IRQ"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
-"if set to yes, check for empty passwords, for no password in /etc/shadow and "
-"for users with the 0 id other than root."
+"Arguments: (umask)\n"
+"\n"
+"Set the user umask."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../ugtk.pm:1 ../../standalone/logdrake:1
 #, c-format
-msgid "if set to yes, run the daily security checks."
-msgstr ""
+msgid "logdrake"
+msgstr "logdrake"
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, verify checksum of the suid/sgid files."
+msgid ""
+"Font Importation and monitoring "
+"application                                     \n"
+"--windows_import : import from all available windows partitions.\n"
+"--xls_fonts      : show all fonts that already exist from xls\n"
+"--strong         : strong verification of font.\n"
+"--install        : accept any font file and any directry.\n"
+"--uninstall      : uninstall any font or any directory of font.\n"
+"--replace        : replace all font if already exist\n"
+"--application    : 0 none application.\n"
+"                 : 1 all application available supported.\n"
+"                 : name_of_application like  so for staroffice \n"
+"                 : and gs for ghostscript for only this one."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "if set to yes, check empty password in /etc/shadow."
+msgid " [--skiptest] [--cups] [--lprng] [--lpd] [--pdq]"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "if set to yes, report unowned files."
-msgstr ""
+msgid "Choose the floppy drive you want to use to make the bootdisk"
+msgstr "ให้เลือกฟล้อปปี้ไดรว์ที่คุณต้องการทำเป็นแผ่นบูต"
 
-#: ../../security/help.pm:1
+#: ../../bootloader.pm:1 ../../help.pm:1
 #, c-format
-msgid ""
-"Arguments: (umask)\n"
-"\n"
-"Set the root umask."
-msgstr ""
+msgid "LILO with text menu"
+msgstr "LILO แบบ text menu"
 
-#: ../../security/help.pm:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid ""
-"Arguments: (length, ndigits=0, nupper=0)\n"
-"\n"
-"Set the password minimum length and minimum number of digit and minimum "
-"number of capitalized letters."
+msgid "Everything (no firewall)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Set the password history length to prevent password reuse."
+msgid "You must specify a kernel image"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"Arguments: (max, inactive=-1)\n"
-"\n"
-"Set password aging to \\fImax\\fP days and delay to change to \\fIinactive"
-"\\fP."
+msgid ", multi-function device on USB"
 msgstr ""
 
-#: ../../security/help.pm:1
-#, c-format
-msgid ""
-"Arguments: (name)\n"
-"\n"
-"Add the name as an exception to the handling of password aging by msec."
-msgstr ""
+#: ../../interactive/newt.pm:1
+#, fuzzy, c-format
+msgid "Do"
+msgstr "ทำเรียบร้อยแล้ว"
 
-#: ../../security/help.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enable/Disable sulogin(8) in single user level."
-msgstr ""
+msgid "Contacting the mirror to get the list of available packages..."
+msgstr "กำลังติดต่อกับมิลเรอร์ไซต์เพื่อหารายการของแพ็คเก็จที่มีให้"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Activate/Disable daily security check."
-msgstr ""
+msgid "Lithuanian AZERTY (old)"
+msgstr "Lithuanian AZERTY (old)"
 
-#: ../../security/help.pm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Activate/Disable ethernet cards promiscuity check."
-msgstr ""
+msgid "Brazilian (ABNT-2)"
+msgstr "บราซิล"
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Use password to authenticate users."
+msgid "IP address of host/network:"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Enabling su only from members of the wheel group or allow su from any user."
+"the progress bar y coordinate\n"
+"of its upper left corner"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../install_gtk.pm:1
+#, fuzzy, c-format
+msgid "System installation"
+msgstr "การติดตั้ง SILO"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable msec hourly security check."
+msgid "Saint Vincent and the Grenadines"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable the logging of IPv4 strange packets."
-msgstr ""
+msgid "/File/_Open"
+msgstr "/ไฟล์/_เปิด"
 
 #: ../../security/help.pm:1
 #, c-format
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Enable/Disable libsafe if libsafe is found on the system."
+"The argument specifies if clients are authorized to connect\n"
+"to the X server on the tcp port 6000 or not."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Location of auto_install.cfg file"
+msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
+
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable IP spoofing protection."
-msgstr ""
+msgid "Open Firmware Delay"
+msgstr "Open Firmware Delay"
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Hungary"
+msgstr "อังการี"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Total progess"
+msgstr "กำลังตรวจสอบพอร์ต"
+
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Color configuration"
+msgstr "การคอนฟิก"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg, alert=1)\n"
-"\n"
-"Enable/Disable name resolution spoofing protection.  If\n"
-"\\fIalert\\fP is true, also reports to syslog."
+msgid "New Zealand"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../security/level.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg, expr='*.*', dev='tty12')\n"
-"\n"
-"Enable/Disable syslog reports to console 12. \\fIexpr\\fP is the\n"
-"expression describing what to log (see syslog.conf(5) for more details) and\n"
-"dev the device to report the log."
+"There are already some restrictions, and more automatic checks are run every "
+"night."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "please choose the date to restore"
+msgstr "คุณมีเม้าส์ชนิดใด"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Enable/Disable crontab and at for users. Put allowed users in /etc/cron."
-"allow and /etc/at.allow\n"
-"(see man at(1) and crontab(1))."
+msgid "Switching from ext2 to ext3"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Arguments: ()\n"
-"\n"
-"If SERVER_LEVEL (or SECURE_LEVEL if absent) is greater than 3\n"
-"in /etc/security/msec/security.conf, creates the symlink /etc/security/msec/"
-"server\n"
-"to point to /etc/security/msec/server.<SERVER_LEVEL>. The /etc/security/msec/"
-"server\n"
-"is used by chkconfig --add to decide to add a service if it is present in "
-"the file\n"
-"during the installation of packages."
+msgid "LPRng"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Authorize all services controlled by tcp_wrappers (see hosts.deny(5)) if "
-"\\fIarg\\fP = ALL. Only local ones\n"
-"if \\fIarg\\fP = LOCAL and none if \\fIarg\\fP = NONE. To authorize the "
-"services you need, use /etc/hosts.allow\n"
-"(see hosts.allow(5))."
+msgid "Netherlands Antilles"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"The argument specifies if clients are authorized to connect\n"
-"to the X server on the tcp port 6000 or not."
+msgid "Browse to new restore repository."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg, listen_tcp=None)\n"
 "\n"
-"Allow/Forbid X connections. First arg specifies what is done\n"
-"on the client side: ALL (all connections are allowed), LOCAL (only\n"
-"local connection) and NONE (no connection)."
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard allows you to install local or remote printers to be used from "
+"this machine and also from other machines in the network.\n"
+"\n"
+"It asks you for all necessary information to set up the printer and gives "
+"you access to all available printer drivers, driver options, and printer "
+"connection types."
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "and %d unknown printers"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid the list of users on the system on display managers (kdm and "
-"gdm)."
+"Early Intel Pentium chips manufactured have a bug in their floating point "
+"processor which did not achieve the required precision when performing a "
+"Floating point DIVision (FDIV)"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid direct root login."
-msgstr ""
+msgid "No ISDN PCI card found. Please select one on the next screen."
+msgstr "ไม่พบการ์ด ISDN PCI  กรุณาเลือกจากหน้าต่อไป"
 
-#: ../../security/help.pm:1
+#: ../../common.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid remote root login."
-msgstr ""
+msgid "GB"
+msgstr "GB"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid reboot by the console user."
-msgstr ""
+msgid "Please give a user name"
+msgstr "โปรดป้อนชื่อผู้ใช้"
 
-#: ../../security/help.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"If \\fIarg\\fP = ALL allow /etc/issue and /etc/issue.net to exist. If \\fIarg"
-"\\fP = NONE no issues are\n"
-"allowed else only /etc/issue is allowed."
-msgstr ""
+msgid "Enable CD Boot?"
+msgstr "Enable CD Boot?"
 
-#: ../../security/help.pm:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-"Allow/Forbid autologin."
+msgid " enter `void' for void entry"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Arguments: (arg)\n"
-"\n"
-" Accept/Refuse icmp echo."
+msgid "on Hard Drive"
 msgstr ""
 
-#: ../../security/help.pm:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Winmodem connection"
+msgstr "การติดต่อโดยใช้ Modem ธรรมดา"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Arguments: (arg)\n"
 "\n"
-" Accept/Refuse broadcasted icmp echo."
+"Congratulations, your printer is now installed and configured!\n"
+"\n"
+"You can print using the \"Print\" command of your application (usually in "
+"the \"File\" menu).\n"
+"\n"
+"If you want to add, remove, or rename a printer, or if you want to change "
+"the default option settings (paper input tray, printout quality, ...), "
+"select \"Printer\" in the \"Hardware\" section of the Mandrake Control "
+"Center."
 msgstr ""
 
 #: ../../security/help.pm:1
@@ -11666,725 +11408,535 @@ msgstr ""
 msgid ""
 "Arguments: (arg)\n"
 "\n"
-"Accept/Refuse bogus IPv4 error messages."
+"Set the password history length to prevent password reuse."
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Security Administrator (login or email)"
+msgid "Now, you can run xawtv (under X Window!) !\n"
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"A library which defends against buffer overflow and format string attacks."
-msgstr ""
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Use libsafe for servers"
-msgstr "เลือกออปชั่นเพิ่มเติมสำหรับเซิร์ฟเวอร์"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Security level"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
-
-#: ../../security/level.pm:1
-#, fuzzy, c-format
-msgid "Please choose the desired security level"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+msgid "Not enough swap space to fulfill installation, please add some"
+msgstr "ไม่มีพื้นที่สวอปเพียงพอกับการติดตั้ง โปรดเพิ่มเนื้อที่"
 
-#: ../../security/level.pm:1
+#. -PO: example: lilo-graphic on /dev/hda1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "DrakSec Basic Options"
-msgstr "/Options/ทดลอง"
+msgid "%s on %s"
+msgstr "Port"
 
-#: ../../security/level.pm:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"This is similar to the previous level, but the system is entirely closed and "
-"security features are at their maximum."
+"GNU/Linux manages time in GMT (Greenwich Mean Time) and translates it to\n"
+"local time according to the time zone you selected. If the clock on your\n"
+"motherboard is set to local time, you may deactivate this by unselecting\n"
+"\"%s\", which will let GNU/Linux know that the system clock and the\n"
+"hardware clock are in the same timezone. This is useful when the machine\n"
+"also hosts another operating system like Windows.\n"
+"\n"
+"The \"%s\" option will automatically regulate the clock by connecting to a\n"
+"remote time server on the Internet. For this feature to work, you must have\n"
+"a working Internet connection. It is best to choose a time server located\n"
+"near you. This option actually installs a time server that can used by\n"
+"other machines on your local network as well."
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"With this security level, the use of this system as a server becomes "
-"possible.\n"
-"The security is now high enough to use the system as a server which can "
-"accept\n"
-"connections from many clients. Note: if your machine is only a client on the "
-"Internet, you should choose a lower level."
-msgstr ""
+msgid "Which is your timezone?"
+msgstr "คุณใช้ย่านเวลาใด? "
 
-#: ../../security/level.pm:1
-#, c-format
-msgid ""
-"There are already some restrictions, and more automatic checks are run every "
-"night."
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Guinea"
+msgstr "ทั่วไป"
 
-#: ../../security/level.pm:1
+#: ../../network/tools.pm:1
+#, fuzzy, c-format
+msgid "The system is now connected to the Internet."
+msgstr "ติดต่อเข้า Internet เรียบร้อย"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This is the standard security recommended for a computer that will be used "
-"to connect to the Internet as a client."
+msgid "South Georgia and the South Sandwich Islands"
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid ""
-"Passwords are now enabled, but use as a networked computer is still not "
-"recommended."
+msgid "Japan (broadcast)"
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"This level is to be used with care. It makes your system more easy to use,\n"
-"but very sensitive. It must not be used for a machine connected to others\n"
-"or to the Internet. There is no password access."
+msgid "Mozambique"
 msgstr ""
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Paranoid"
-msgstr "Paranoid"
+msgid "Icon"
+msgstr "Icon"
 
-#: ../../security/level.pm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Higher"
-msgstr "สูง"
+msgid "Please choose what you want to backup"
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
 
-#: ../../security/level.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "High"
-msgstr "สูง"
+msgid "256 colors (8 bits)"
+msgstr "256 สี (8 บิต)"
 
-#: ../../security/level.pm:1
+#: ../../any.pm:1
 #, c-format
-msgid "Poor"
-msgstr "ต่ำกว่ามาตรฐาน"
+msgid "Read-write"
+msgstr "Read-write"
 
-#: ../../security/level.pm:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Welcome To Crackers"
-msgstr "Welcome To Crackers"
+msgid "Size: %s\n"
+msgstr "ขนาด: %s\n"
 
-#: ../../standalone/XFdrake:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Please relog into %s to activate the changes"
-msgstr "กรุณาเข้าไปที่ %s อีกครั้งเพื่อเริ่มการเปลี่ยนแปลง"
+msgid "Hostname: "
+msgstr "ชื่อโฮสต์:"
 
-#: ../../standalone/XFdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Please log out and then use Ctrl-Alt-BackSpace"
-msgstr "กรุณาออกไปและใช้ Ctrl-Alt-BackSpace"
+msgid "Chunk size %s\n"
+msgstr "ขนาดของ Chunk %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "/etc/hosts.allow and /etc/hosts.deny already configured - not changed"
+msgid "Build the future of Linux!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Need to create /etc/dhcpd.conf first!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Local Printer"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Something went wrong! - Is mkisofs installed?"
+msgid ""
+" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
+"fr>"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "Etherboot ISO image is %s"
+msgid "[--file=myfile] [--word=myword] [--explain=regexp] [--alert]"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "No floppy drive available!"
-msgstr "ไม่มีไดรว์ฟล้อปปี็เหลืออยู่"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Floppy can be removed now"
-msgstr ""
+msgid "ADSL connection"
+msgstr "LAN connection"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Couldn't access the floppy!"
+msgid "No configuration, please click Wizard or Advanced.\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakautoinst:1
 #, fuzzy, c-format
-msgid "Please insert floppy disk:"
-msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
+msgid "Error!"
+msgstr "ผิดพลาด"
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Write Config"
-msgstr "คอนฟิกใหม่"
-
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Dynamic IP Address Pool:"
-msgstr ""
+msgid "cable connection detected"
+msgstr "cable connection"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Most of these values were extracted\n"
-"from your running system.\n"
-"You can modify as needed."
+msgid "Permission denied transferring %s to %s"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Server Configuration"
-msgstr "การปรับแต่ง LAN"
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "IP Range End:"
-msgstr ""
+msgid "/_Report Bug"
+msgstr "/_แจ้ง Bug"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "IP Range Start:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Name Servers:"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "Resize"
+msgstr "เปลี่ยนขนาด"
 
-#: ../../standalone/drakTermServ:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Domain Name:"
-msgstr "ชื่อโดเมน"
+msgid "Dominica"
+msgstr "โดเมน NIS"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Broadcast Address:"
+msgid "Please enter the device name to use for backup"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Subnet Mask:"
-msgstr ""
+msgid "Resolution: %s\n"
+msgstr "ความละเอียดของภาพ %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Routers:"
-msgstr ""
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Netmask:"
-msgstr "เน็ตมาสก์"
+msgid "matching"
+msgstr "matching"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install2.pm:1
 #, c-format
-msgid "Subnet:"
+msgid ""
+"Can't access kernel modules corresponding to your kernel (file %s is "
+"missing), this generally means your boot floppy in not in sync with the "
+"Installation medium (please create a newer boot floppy)"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Need to restart the Display Manager for full changes to take effect. \n"
-"(service dm restart - at the console)"
+"Please select the correct port. For example, the \"COM1\" port under\n"
+"Windows is named \"ttyS0\" under GNU/Linux."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "dhcpd Config..."
-msgstr "กำลังทำการคอนฟิก"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Delete Client"
-msgstr "DHCP Client"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "The following packages are going to be removed"
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "<-- Edit Client"
-msgstr "DHCP Client"
+#: ../../network/adsl.pm:1 ../../network/ethernet.pm:1
+#, c-format
+msgid "Connect to the Internet"
+msgstr "ต่อเข้า Internet "
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Add Client -->"
-msgstr ""
+msgid "Use existing partitions"
+msgstr "ใช้พาร์ติชั่นที่มีอยู่"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Allow Thin Clients"
-msgstr "DHCP Client"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Canadian (Quebec)"
+msgstr "คานาดา (ควิเบค)"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Thin Client"
-msgstr "DHCP Client"
+#: ../../Xconfig/various.pm:1
+#, c-format
+msgid "Mouse device: %s\n"
+msgstr "ดีไวซ์ของเม้าส์: %s\n"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "No net boot images created!"
+msgid "Reselect correct fonts"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "type: %s"
-msgstr "ประเภท: "
-
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "<-- Del User"
+msgid ""
+"Options Description:\n"
+"\n"
+"Please be careful when you are using ftp backup, because only \n"
+"backups that are already built are sent to the server.\n"
+"So at the moment, you need to build the backup on your hard \n"
+"drive before sending it to the server.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Add User -->"
-msgstr "เพิ่มผู้ใช้"
-
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"!!! Indicates the password in the system database is different than\n"
-" the one in the Terminal Server database.\n"
-"Delete/re-add the user to the Terminal Server to enable login."
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/netconnect.pm:1
 #, fuzzy, c-format
-msgid "Delete All NBIs"
-msgstr "เลือกไฟล์"
+msgid "We are now going to configure the %s connection."
+msgstr ""
+"\n"
+"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
 
-#: ../../standalone/drakTermServ:1
+#: ../../share/advertising/13-mdkexpert_corporate.pl:1
 #, fuzzy, c-format
-msgid "<-- Delete"
-msgstr "ลบ"
+msgid "MandrakeExpert Corporate"
+msgstr "แบบผู้เชี่ยวชาญ (Expert)"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone.pm:1
 #, c-format
-msgid "This will take a few minutes."
+msgid ""
+" [everything]\n"
+"       XFdrake [--noauto] monitor\n"
+"       XFdrake resolution"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "Build All Kernels -->"
-msgstr ""
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Write protection"
+msgstr "ใช้ auto detection"
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "No NIC selected!"
-msgstr "ไม่เชื่อมต่อ"
+msgid "You've not selected any font"
+msgstr "ลบคิว"
 
-#: ../../standalone/drakTermServ:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Build Single NIC -->"
-msgstr ""
+msgid "Language"
+msgstr "เลือกภาษาที่คุณใช้"
 
-#: ../../standalone/drakTermServ:1
-#, c-format
-msgid "No kernel selected!"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer model selection"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
 
-#: ../../standalone/drakTermServ:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Build Whole Kernel -->"
-msgstr ""
+msgid ""
+"After changing type of partition %s, all data on this partition will be lost"
+msgstr "การเปลี่ยนชนิดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะถูกลบทิ้ง"
 
-#: ../../standalone/drakTermServ:1
+#: ../../common.pm:1
 #, c-format
-msgid "Boot ISO"
-msgstr ""
+msgid "%d seconds"
+msgstr "%d วินาที"
 
-#: ../../standalone/drakTermServ:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakautoinst:1
 #, c-format
-msgid "Boot Floppy"
-msgstr ""
+msgid "Insert a blank floppy in drive %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s "
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrdrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run most\n"
-"\t\t\tsoftware on the client machine. A special inittab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are modified\n"
-"\t\t\tif thin clients are used, to enable xdmcp. Since there are security "
-"issues in using xdmcp,\n"
-"\t\t\thosts.deny and hosts.allow are modified to limit access to the local "
-"subnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a per-client\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
+msgid "A valid URI must be entered!"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid ""
-"\n"
-"\n"
-" Thanks:\n"
-"\t- LTSP Project http://www.ltsp.org\n"
-"\t- Michael Brown <mbrown\\@fensystems.co.uk>\n"
-"\n"
+msgid "Found \"%s\" interface do you want to use it ?"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-" Copyright (C) 2002 by MandrakeSoft \n"
-"\tStew Benedict sbenedict\\@mandrakesoft.com\n"
-"\n"
+msgid "Re-configure interface and DHCP server"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
+#: ../../harddrake/sound.pm:1
 #, fuzzy, c-format
-msgid "Add/Del Clients"
-msgstr "DHCP Client"
+msgid "Sound configuration"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Add/Del Users"
-msgstr "เพิ่มผู้ใช้"
+msgid "Photo test page"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
 
-#: ../../standalone/drakTermServ:1
+#: ../../help.pm:1 ../../install_interactive.pm:1
 #, c-format
-msgid "Net Boot Images"
-msgstr ""
+msgid "Custom disk partitioning"
+msgstr "กำลังพาร์ติชั่น Custom disk"
 
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Etherboot Floppy/ISO"
+msgid "Enter Printer Name and Comments"
 msgstr ""
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Stop Server"
-msgstr "เซิร์ฟเวอร์ NIS"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Start Server"
-msgstr "เซิร์ฟเวอร์ NIS"
-
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid "Disable Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-
-#: ../../standalone/drakTermServ:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Enable Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid ""
+"The following printers\n"
+"\n"
+"%s%s\n"
+"are directly connected to your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
 
 #: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Mandrake Terminal Server Configuration"
-msgstr "การคอนฟิก Internet"
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Remove the last item"
-msgstr "ฟอร์แมต loopback file %s"
+msgid "type: %s"
+msgstr "ประเภท: "
 
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Add an item"
-msgstr "เพิ่มผู้ใช้"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTY)"
+msgstr "สโลวาเกีย (QWERTY)"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/draksound:1
 #, fuzzy, c-format
-msgid "Auto Install"
-msgstr "ติดตั้ง"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid ""
-"The floppy has been successfully generated.\n"
-"You may now replay your installation."
-msgstr ""
+msgid "No Sound Card detected!"
+msgstr "ไม่เชื่อมต่อ"
 
-#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "Congratulations!"
-msgstr "ขอแสดงความยินดี"
+msgid "Mouse Port"
+msgstr "พอร์ตของเม้าส์"
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakTermServ:1
 #, c-format
 msgid ""
-"\n"
-"Welcome.\n"
-"\n"
-"The parameters of the auto-install are available in the sections on the left"
+"Need to restart the Display Manager for full changes to take effect. \n"
+"(service dm restart - at the console)"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Creating auto install floppy"
-msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
+msgid "Ftp Server"
+msgstr "เซิร์ฟเวอร์ NIS"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "manual"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Enable/Disable msec hourly security check."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid ""
-"Please choose for each step whether it will replay like your install, or it "
-"will be manual"
+msgid "%s fonts conversion"
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Automatic Steps Configuration"
-msgstr "Boot Style Configuration"
+msgid "the type of bus on which the mouse is connected"
+msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
 
-#: ../../standalone/drakautoinst:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "replay"
-msgstr "เรียกอีกครั้ง"
+msgid "Uganda"
+msgstr "Update"
 
-#: ../../standalone/drakautoinst:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
-"You are about to configure an Auto Install floppy. This feature is somewhat "
-"dangerous and must be used circumspectly.\n"
-"\n"
-"With that feature, you will be able to replay the installation you've "
-"performed on this computer, being interactively prompted for some steps, in "
-"order to change their values.\n"
-"\n"
-"For maximum safety, the partitioning and formatting will never be performed "
-"automatically, whatever you chose during the install of this computer.\n"
+"Arguments: (size)\n"
 "\n"
-"Do you want to continue?"
-msgstr ""
-
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Auto Install Configurator"
-msgstr "การคอนฟิกหลังการติดตั้ง"
-
-#: ../../standalone/drakautoinst:1
-#, c-format
-msgid "I can't find needed image file `%s'."
+"Set shell commands history size. A value of -1 means unlimited."
 msgstr ""
 
-#: ../../standalone/drakautoinst:1
-#, fuzzy, c-format
-msgid "Error!"
-msgstr "ผิดพลาด"
-
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"As a review, DrakX will present a summary of information it has about your\n"
+"system. Depending on your installed hardware, you may have some or all of\n"
+"the following entries. Each entry is made up of the configuration item to\n"
+"be configured, followed by a quick summary of the current configuration.\n"
+"Click on the corresponding \"%s\" button to change that.\n"
 "\n"
-"Restore Backup Problems:\n"
+" * \"%s\": check the current keyboard map configuration and change that if\n"
+"necessary.\n"
 "\n"
-"During the restore step, Drakbackup will verify all your\n"
-"backup files before restoring them.\n"
-"Before the restore, Drakbackup will remove \n"
-"your original directory, and you will loose all your \n"
-"data. It is important to be careful and not modify the \n"
-"backup data files by hand.\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
+" * \"%s\": check the current country selection. If you are not in this\n"
+"country, click on the \"%s\" button and choose another one. If your country\n"
+"is not in the first list shown, click the \"%s\" button to get the complete\n"
+"country list.\n"
 "\n"
-"Please be careful when you are using ftp backup, because only \n"
-"backups that are already built are sent to the server.\n"
-"So at the moment, you need to build the backup on your hard \n"
-"drive before sending it to the server.\n"
+" * \"%s\": By default, DrakX deduces your time zone based on the country\n"
+"you have chosen. You can click on the \"%s\" button here if this is not\n"
+"correct.\n"
 "\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"Description:\n"
+" * \"%s\": check the current mouse configuration and click on the button to\n"
+"change it if necessary.\n"
 "\n"
-"  Drakbackup is used to backup your system.\n"
-"  During the configuration you can select: \n"
-"\t- System files, \n"
-"\t- Users files, \n"
-"\t- Other files.\n"
-"\tor All your system ...  and Other (like Windows Partitions)\n"
+" * \"%s\": clicking on the \"%s\" button will open the printer\n"
+"configuration wizard. Consult the corresponding chapter of the ``Starter\n"
+"Guide'' for more information on how to setup a new printer. The interface\n"
+"presented there is similar to the one used during installation.\n"
 "\n"
-"  Drakbackup allows you to backup your system on:\n"
-"\t- Harddrive.\n"
-"\t- NFS.\n"
-"\t- CDROM (CDRW), DVDROM (with autoboot, rescue and autoinstall.).\n"
-"\t- FTP.\n"
-"\t- Rsync.\n"
-"\t- Webdav.\n"
-"\t- Tape.\n"
+" * \"%s\": if a sound card is detected on your system, it is displayed\n"
+"here. If you notice the sound card displayed is not the one that is\n"
+"actually present on your system, you can click on the button and choose\n"
+"another driver.\n"
 "\n"
-"  Drakbackup allows you to restore your system to\n"
-"  a user selected directory.\n"
+" * \"%s\": by default, DrakX configures your graphical interface in\n"
+"\"800x600\" or \"1024x768\" resolution. If that does not suit you, click on\n"
+"\"%s\" to reconfigure your graphical interface.\n"
 "\n"
-"  Per default all backups will be stored on your\n"
-"  /var/lib/drakbackup directory\n"
+" * \"%s\": if a TV card is detected on your system, it is displayed here.\n"
+"If you have a TV card and it is not detected, click on \"%s\" to try to\n"
+"configure it manually.\n"
 "\n"
-"  Configuration file:\n"
-"\t/etc/drakconf/drakbackup/drakbackup.conf\n"
+" * \"%s\": if an ISDN card is detected on your system, it will be displayed\n"
+"here. You can click on \"%s\" to change the parameters associated with the\n"
+"card.\n"
 "\n"
-"Restore Step:\n"
-"  \n"
-"  During the restore step, DrakBackup will remove \n"
-"  your original directory and verify that all \n"
-"  backup files are not corrupted. It is recommended \n"
-"  you do a last backup before restoring.\n"
+" * \"%s\": If you want to configure your Internet or local network access\n"
+"now.\n"
+"\n"
+" * \"%s\": this entry allows you to redefine the security level as set in a\n"
+"previous step ().\n"
 "\n"
+" * \"%s\": if you plan to connect your machine to the Internet, it's a good\n"
+"idea to protect yourself from intrusions by setting up a firewall. Consult\n"
+"the corresponding section of the ``Starter Guide'' for details about\n"
+"firewall settings.\n"
 "\n"
+" * \"%s\": if you wish to change your bootloader configuration, click that\n"
+"button. This should be reserved to advanced users.\n"
+"\n"
+" * \"%s\": here you'll be able to fine control which services will be run\n"
+"on your machine. If you plan to use this machine as a server it's a good\n"
+"idea to review this setup."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
+msgid "Comoros"
+msgstr ""
+
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
 msgid ""
-" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
+"\n"
+"\n"
+"\n"
+"We are now going to configure the %s connection.\n"
+"\n"
+"\n"
+"Press OK to continue."
+msgstr ""
+"\n"
+"คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Yaboot mode"
+msgstr "Boot mode"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "USA (cable)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
 msgid ""
-" Copyright (C) 2001-2002 MandrakeSoft by DUPONT Sebastien <dupont_s\\@epita."
-"fr>"
+"Can't relaunch LiLo!\n"
+"Launch \"lilo\" as root in command line to complete LiLo theme installation."
 msgstr ""
 
+#: ../../mouse.pm:1
+#, c-format
+msgid "Generic 3 Button Mouse"
+msgstr "เม้าส์แบบปกติที่ใช้งานสามปุ่ม"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Select another media to restore from"
+msgstr "คุณมีเม้าส์ชนิดใด"
+
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Software Manager"
+msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"restore description:\n"
+"Restore Description:\n"
 " \n"
 "Only the most recent date will be used, because with incremental \n"
 "backups it is necessary to restore one by one each older backup.\n"
@@ -12396,4578 +11948,5064 @@ msgid ""
 "\n"
 " - Incremental Backups:\n"
 "\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption to use. This option allows you to \n"
-"\tbackup all of your data the first time, and \n"
-"\tonly the changed data after.\n"
-"\tSo you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
-"\n"
-"\n"
-msgstr ""
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"options description:\n"
-"\n"
-" - Backup system files:\n"
-"       \n"
-"\tThis option allows you to backup your /etc directory,\n"
-"\twhich contains all configuration files. Please be\n"
-"\tcareful during the restore step to not overwrite:\n"
-"\t\t/etc/passwd \n"
-"\t\t/etc/group \n"
-"\t\t/etc/fstab\n"
-"\n"
-" - Backup User files: \n"
-"\n"
-"\tThis option allows you select all users that you want \n"
-"\tto backup.\n"
-"\tTo preserve disk space, it is recommended that you \n"
-"\tdo not include the web browser's cache.\n"
-"\n"
-" - Backup Other files: \n"
+"\tThe incremental backup is the most powerful option for \n"
+"\tbackup. This option allows you to backup all your data \n"
+"\tthe first time, and only the changed data afterward.\n"
+"\tThen you will be able, during the restore step, to restore \n"
+"\tyour data from a specified date. If you have not selected \n"
+"\tthis option all old backups are deleted before each backup.    \n"
 "\n"
-"\tThis option allows you to add more data to save.\n"
-"\tWith the other backup it's not possible at the \n"
-"\tmoment to select incremental backup.\t\t\n"
+" - Differential Backups:\n"
 " \n"
-" - Incremental Backups:\n"
-"\n"
-"\tThe incremental backup is the most powerful \n"
-"\toption for backup. This option allows you \n"
-"\tto backup all your data the first time, and \n"
-"\tonly the changed data afterward.\n"
-"\tThen you will be able, during the restore\n"
-"\tstep, to restore your data from a specified\n"
-"\tdate.\n"
-"\tIf you have not selected this option all\n"
-"\told backups are deleted before each backup.    \n"
-"\n"
+"\tThe differential backup, rather than comparing changes in the\n"
+"\tdata to the previous incremental backup, always compares the\n"
+"\tdata to the initial base backup. This method allows one to\n"
+"\trestore the base and then the differential from a certain date.\n"
 "\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid ""
-"\n"
-" Some errors during sendmail are caused by \n"
-" a bad configuration of postfix. To solve it you have to\n"
-" set myhostname or mydomain in /etc/postfix/main.cf\n"
-"\n"
+msgid "Re-submit"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"options description:\n"
-"\n"
-" In this step Drakbackup allow you to change:\n"
-"\n"
-" - The compression mode:\n"
-"    \n"
-"      If you check bzip2 compression, you will compress\n"
-"      your data better than gzip (about 2-10 %%).\n"
-"      This option is not checked by default because\n"
-"      this compression mode needs more time (about 1000%% more).\n"
-" \n"
-" - The update mode:\n"
-"\n"
-"      This option will update your backup, but this\n"
-"      option is not really useful because you need to\n"
-"      decompress your backup before you can update it.\n"
-"      \n"
-" - the .backupignore mode:\n"
-"\n"
-"      Like with cvs, Drakbackup will ignore all references\n"
-"      included in .backupignore files in each directories.\n"
-"      ex: \n"
-"         #> cat .backupignore\n"
-"         *.o\n"
-"         *~\n"
-"         ...\n"
-"      \n"
-"\n"
+msgid "CD in place - continue."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Drakbackup"
-msgstr ""
+msgid "KB"
+msgstr "KB"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Restore"
-msgstr "เรียกคืนจากไฟล์"
+msgid "Network & Internet"
+msgstr "Network interface"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now"
-msgstr "เซ็ตอัพระบบไฟล์"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"phonetic\" QWERTY"
+msgstr "ลิธัวเนีย \"โฟเนติค\" QWERTY"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Advanced Configuration"
-msgstr "การปรับแต่ง LAN"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Net Boot Images"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Wizard Configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "Sharing of local scanners"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "View Backup Configuration."
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+#: ../../Xconfig/monitor.pm:1
+#, c-format
+msgid "Plug'n Play probing failed. Please select the correct monitor"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup Now from configuration file"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+#: ../../services.pm:1
+#, c-format
+msgid "Services and deamons"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Drakbackup Configuration"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+msgid "Remote host name missing!"
+msgstr "ชื่อโฮสต์รีโมท"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Total Progress"
+msgid "with /usr"
 msgstr ""
 
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Sending files..."
-msgstr "บันทึกลงไฟล์"
+msgid "Network"
+msgstr "Network interface"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "files sending by FTP"
+msgid "Auto-detect printers connected to machines running Microsoft Windows"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup other files"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: ../../any.pm:1
+#, c-format
+msgid "This password is too simple"
+msgstr "รหัสผ่านนี้ง่ายต่อการเดา"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup user files"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Slovakian (QWERTZ)"
+msgstr "สโลวาเกีย (QWERTZ)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup system files"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: ../../share/advertising/06-development.pl:1
+#, c-format
+msgid ""
+"To modify and to create in different languages such as Perl, Python, C and C+"
+"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
+"development environments."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Under Devel ... please wait."
+msgid "Truly minimal install (especially no urpmi)"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"No configuration file found \n"
-"please click Wizard or Advanced."
+"  Transfer  \n"
+"Now"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please select data to backup..."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+msgid "Use daemon"
+msgstr "ชื่อผู้ใช้"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../network/modem.pm:1
+#: ../../standalone/drakconnect:1 ../../standalone/logdrake:1
+#, c-format
+msgid "Authentication"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add this printer to Star Office/OpenOffice.org/GIMP"
+msgstr ""
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Please select media for backup..."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+msgid "Additional CUPS servers: "
+msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Choose one of the auto-detected printers from the list or enter the hostname "
+"or IP and the optional port number (default is 9100) in the input fields."
+msgstr ""
+
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Please select data to restore..."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+msgid "Where do you want to mount %s?"
+msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "The following packages need to be installed:\n"
-msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกติดตั้ง"
+msgid "Restore Via Network"
+msgstr "เรียกคืนจากไฟล์"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Algeria"
+msgstr "พอร์ตอนุกรม"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Initrd-size"
+msgstr "Initrd-size"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Error during sending file via FTP.\n"
-" Please correct your FTP configuration."
+"In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Error during sendmail.\n"
-"  Your report mail was not sent.\n"
-"  Please configure sendmail"
+msgid "\tBackups use tar and gzip\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Next"
-msgstr "Next ->"
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "2 MB"
+msgstr "2 MB"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Previous"
-msgstr "<- ก่อน"
+#: ../../standalone.pm:1
+#, c-format
+msgid ""
+"[OPTION]...\n"
+"  --no-confirmation      don't ask first confirmation question in "
+"MandrakeUpdate mode\n"
+"  --no-verify-rpm        don't verify packages signatures\n"
+"  --changelog-first      display changelog before filelist in the "
+"description window\n"
+"  --merge-all-rpmnew     propose to merge all .rpmnew/.rpmsave files found"
+msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Save"
-msgstr "สถานะ:"
+msgid "Setting Default Printer..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Build Backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Interface %s (using module %s)"
+msgstr "Interface %s (using module %s)"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Progress"
-msgstr "เรียกคืนจากไฟล์"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Name: %s\n"
+msgstr "ชื่อ: %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "Restore From Catalog"
-msgstr "กู้ตารางพาร์ติชั่น"
+msgid "Generating preview ..."
+msgstr "กำลังตรวจสอบอุปกรณ์..."
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Browse to new restore repository."
+msgid ""
+"Freq should have the suffix k, M or G (for example, \"2.46G\" for 2.46 GHz "
+"frequency), or add enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "CD in place - continue."
+msgid "serial"
+msgstr "พอร์ตอนุกรม"
+
+#: ../../harddrake/data.pm:1
+#, c-format
+msgid "DVD-ROM"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Custom Restore"
-msgstr "แบบปรับแก้ได้ (Customized) "
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Georgian (\"Latin\" layout)"
+msgstr "จอร์เจีย (เลย์เอ้าท์แบบละติน)"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/09-mdksecure.pl:1
 #, c-format
-msgid "Restore all backups"
+msgid "Get the best items with Mandrake Linux Strategic partners"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Failed..."
-msgstr "เรียกคืนจากไฟล์"
-
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Files Restored..."
+msgid ""
+"You may now provide options to module %s.\n"
+"Note that any address should be entered with the prefix 0x like '0x123'"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/04-configuration.pl:1
 #, c-format
-msgid "Path or Module required"
+msgid ""
+"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
+"tool to fully adapt your computer to the use you make of it. Configure and "
+"customize elements such as the security level, the peripherals (screen, "
+"mouse, keyboard...), the Internet connection and much more!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Hostname required"
-msgstr "ชื่อโฮสต์:"
+msgid "Kenya"
+msgstr "คีย์บอร์ด"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, c-format
+msgid "Use ``Unmount'' first"
+msgstr "ใช้ ``Unmount'' ก่อน"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Username required"
-msgstr "ชื่อผู้ใช้"
+msgid "Installing mtools packages..."
+msgstr "กำลังติดตั้งแพ็คเก็จ %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Password required"
-msgstr "รหัสผ่าน"
+msgid "You must specify a root partition"
+msgstr "คุณจะต้องมีพาร์ติชั่นสวอป"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "first step creation"
+msgstr "สร้าง boot disk"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Host Path or Module"
+msgid "Both Shift keys simultaneously"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Host Name"
-msgstr "ชื่อโฮสต์:"
+msgid "Select a scanner model"
+msgstr "เลือกกราฟฟิคการ์ด"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Restore Via Network Protocol: %s"
+msgid "LPRng - LPR New Generation"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Restore Via Network"
-msgstr "เรียกคืนจากไฟล์"
+msgid "Drakbackup Configuration"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Not the correct tape label. Tape is labelled %s."
-msgstr ""
+msgid "Save as.."
+msgstr "บันทึกแฟ้มเป็น"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakconnect:1
 #, c-format
 msgid ""
-"Insert the tape with volume label %s\n"
-" in the tape drive device %s"
+"This interface has not been configured yet.\n"
+"Launch the configuration wizard in the main window"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore From Tape"
-msgstr "กู้ตารางพาร์ติชั่น"
-
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Not the correct CD label. Disk is labelled %s."
+msgid "Korea (North)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Insert the CD with volume label %s\n"
-" in the CD drive under mount point /mnt/cdrom"
-msgstr ""
+msgid "Autologin"
+msgstr "Autologin"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_gtk.pm:1
 #, fuzzy, c-format
-msgid "Restore From CD"
-msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+msgid "System configuration"
+msgstr "การคอนฟิก"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Backup files not found at %s."
+msgid "Domain Admin Password"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
+#: ../../share/advertising/05-desktop.pl:1
+#, c-format
 msgid ""
-"Change\n"
-"Restore Path"
-msgstr "เรียกคืนจากไฟล์"
+"Perfectly adapt your computer to your needs thanks to the 11 available "
+"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
+"2.2, Window Maker, ..."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"Restore Selected\n"
-"Files"
-msgstr "ลบคิว"
+msgid "Configuring printer ..."
+msgstr "การคอนฟิกเครื่องพิมพ์"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_interactive.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
 msgid ""
-"Restore Selected\n"
-"Catalog Entry"
+"To ensure data integrity after resizing the partition(s), \n"
+"filesystem checks will be run on your next boot into Windows(TM)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../common.pm:1
 #, c-format
-msgid "Remove user directories before restore."
-msgstr ""
+msgid "MB"
+msgstr "MB"
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Do new backup before restore (only for incremental backups.)"
+msgid "if set to yes, run some checks against the rpm database."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "select path to restore (instead of /)"
-msgstr "คุณมีเม้าส์ชนิดใด"
+#: ../../lang.pm:1
+#, c-format
+msgid "Virgin Islands (British)"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Restore Other"
-msgstr "เรียกคืนจากไฟล์"
+msgid "Bermuda"
+msgstr "เยอรมัน"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore Users"
-msgstr "เรียกคืนจากไฟล์"
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "click here if you are sure."
+msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore system"
-msgstr "ติดตั้งระบบ"
+#, c-format
+msgid ""
+"No configuration file found \n"
+"please click Wizard or Advanced."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Other Media"
-msgstr "อื่นๆ"
+#: ../../help.pm:1
+#, c-format
+msgid ""
+"Listed here are the existing Linux partitions detected on your hard drive.\n"
+"You can keep the choices made by the wizard, since they are good for most\n"
+"common installations. If you make any changes, you must at least define a\n"
+"root partition (\"/\"). Do not choose too small a partition or you will not\n"
+"be able to install enough software. If you want to store your data on a\n"
+"separate partition, you will also need to create a \"/home\" partition\n"
+"(only possible if you have more than one Linux partition available).\n"
+"\n"
+"Each partition is listed as follows: \"Name\", \"Capacity\".\n"
+"\n"
+"\"Name\" is structured: \"hard drive type\", \"hard drive number\",\n"
+"\"partition number\" (for example, \"hda1\").\n"
+"\n"
+"\"Hard drive type\" is \"hd\" if your hard drive is an IDE hard drive and\n"
+"\"sd\" if it is a SCSI hard drive.\n"
+"\n"
+"\"Hard drive number\" is always a letter after \"hd\" or \"sd\". For IDE\n"
+"hard drives:\n"
+"\n"
+" * \"a\" means \"master hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"b\" means \"slave hard drive on the primary IDE controller\";\n"
+"\n"
+" * \"c\" means \"master hard drive on the secondary IDE controller\";\n"
+"\n"
+" * \"d\" means \"slave hard drive on the secondary IDE controller\".\n"
+"\n"
+"With SCSI hard drives, an \"a\" means \"lowest SCSI ID\", a \"b\" means\n"
+"\"second lowest SCSI ID\", etc."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
 #, fuzzy, c-format
-msgid "Select another media to restore from"
-msgstr "คุณมีเม้าส์ชนิดใด"
+msgid "Remove"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Please enter the directory where backups are stored"
+msgid "Lesotho"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Restore from Hard Disk."
-msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
+#: ../../ugtk2.pm:1
+#, c-format
+msgid "utopia 25"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use quota for backup files."
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: ../../printer/main.pm:1
+#, c-format
+msgid "Pipe job into a command"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"Please enter the maximum size\n"
-" allowed for Drakbackup"
+msgid "new dynamic device name generated by core kernel devfs"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save:"
-msgstr "กรุณาทดสอบเม้าส์"
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/drakgw:1 ../../standalone/harddrake2:1
+#, c-format
+msgid "Yes"
+msgstr "ใช่"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use Hard Disk to backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+#: ../../lang.pm:1
+#, c-format
+msgid "Cote d'Ivoire"
+msgstr ""
+
+#: ../../network/isdn.pm:1
+#, c-format
+msgid "Which protocol do you want to use?"
+msgstr "Protocol ไหนที่คุณต้องการ"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "please choose the date to restore"
-msgstr "คุณมีเม้าส์ชนิดใด"
+msgid "Restore Progress"
+msgstr "เรียกคืนจากไฟล์"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Backup the system files before:"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Estonia"
+msgstr "Estonian"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "User list to restore (only the most recent date per user is important)"
+msgid "Choose the host on which the local scanners should be made available:"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "OK to restore the other files."
+msgid ""
+"You have a hole in your partition table but I can't use it.\n"
+"The only solution is to move your primary partitions to have the hole next "
+"to the extended partitions."
 msgstr ""
+"คุณมีช่องว่างในตารางพาร์ติชั่น  แต่โปรแกรมจะไม่ใช้งานช่องว่างนั้น\n"
+"การแก้ไขปัญหาสามารถทำได้โดยย้ายไพรมารีพาร์ติชั่น เพื่อให้ช่องว่าไปต่อท้ายพาร์ติชั่นแบบ extended"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "         Restore Configuration       "
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
-
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "          Successfuly Restored on %s       "
-msgstr ""
+msgid "Channel"
+msgstr "ยกเลิก"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1 ../../interactive/gtk.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
 #, c-format
-msgid "          All of your selected data have been          "
-msgstr ""
+msgid "Add"
+msgstr "เพิ่ม"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Backup files are corrupted"
-msgstr ""
+msgid "No Internet Connection Sharing has ever been configured."
+msgstr "ไม่มีการเชื่อมต่อกับ Internet แบบ sharing"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Please uncheck or remove it on next time."
-msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+msgid " Error while sending mail. \n"
+msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid ""
-"List of data corrupted:\n"
-"\n"
-msgstr ""
+msgid "Keyboard"
+msgstr "คีย์บอร์ด"
 
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"List of data to restore:\n"
-"\n"
+"Insert the CD with volume label %s\n"
+" in the CD drive under mount point /mnt/cdrom"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "No configuration, please click Wizard or Advanced.\n"
+msgid ""
+"Rate should have the suffix k, M or G (for example, \"11M\" for 11M), or add "
+"enough '0' (zeroes)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
+#, fuzzy, c-format
+msgid "Choose the connection you want to configure"
+msgstr "เลือกเครื่องมือที่คุณต้องการใช้"
+
+#: ../../standalone/draksec:1
+#, fuzzy, c-format
+msgid "Please wait, setting security level..."
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+
+#: ../../share/advertising/06-development.pl:1
 #, c-format
-msgid "\t-Network by webdav.\n"
+msgid "Mandrake Linux 9.1: the ultimate development platform"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "\t-Network by rsync.\n"
-msgstr ""
+msgid "Configuring network device %s"
+msgstr "กำลังคอนฟิกอุปกรณ์เน็ตเวิร์ก %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "activated"
+msgstr "แอ็คทีฟ"
+
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Please choose which network interface will be used for the dhcp server."
+msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-Network by SSH.\n"
-msgstr ""
+msgid "Finding packages to upgrade..."
+msgstr "กำลังหาแพ็คเก็จที่จะทำการอัพเกรด"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "\t-Network by FTP.\n"
-msgstr ""
+msgid "Mount point: "
+msgstr "จุดเม้าท์: "
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "\t-Tape \n"
+msgid "parse all fonts"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "\t-CDROM.\n"
+msgid "With X"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "\t-Hard drive.\n"
-msgstr ""
+msgid "Multi-head configuration"
+msgstr "Multi-head configuration"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "No browser available! Please install one"
+msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
+
+#: ../../Xconfig/main.pm:1
 #, c-format
 msgid ""
+"Keep the changes?\n"
+"The current configuration is:\n"
 "\n"
-"- Daemon (%s) include:\n"
+"%s"
 msgstr ""
+"เก็บการเปลี่ยนแปลง\n"
+"การปรับแต่งปัจจุบัณคือ:\n"
+"\n"
+"%s"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "\tBackups use tar and gzip\n"
-msgstr ""
+msgid "You can't use ReiserFS for partitions smaller than 32MB"
+msgstr "คุณไม่สามารถใช้ ReiserFS สำหรับพาร์ติชั่นที่น้อยกว่า 32MB ได้"
 
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "\tBackups use tar and bzip2\n"
+msgid ""
+"The rwho protocol lets remote users get a list of all of the users\n"
+"logged into a machine running the rwho daemon (similiar to finger)."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "\tDo not include System Files\n"
-msgstr ""
+msgid "Domain name"
+msgstr "ชื่อโดเมน"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid ""
-"\n"
-"- Options:\n"
-msgstr "/Options/ทดลอง"
+msgid "Sharing of local printers"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_messages.pm:1
 #, c-format
-msgid ""
-"\t\t user name: %s\n"
-"\t\t on path: %s \n"
+msgid "http://www.mandrakelinux.com/en/91errata.php3"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Available printers"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Empty"
+msgstr "ว่าง"
+
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"X (for X Window System) is the heart of the GNU/Linux graphical interface\n"
+"on which all the graphical environments (KDE, GNOME, AfterStep,\n"
+"WindowMaker, etc.) bundled with Mandrake Linux rely upon.\n"
 "\n"
-"- Save via %s on host: %s\n"
+"You will be presented with a list of different parameters to change to get\n"
+"an optimal graphical display: Graphic Card\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"graphic card installed on your machine. If it is not the case, you can\n"
+"choose from this list the card you actually have installed.\n"
+"\n"
+"   In the case that different servers are available for your card, with or\n"
+"without 3D acceleration, you are then asked to choose the server that best\n"
+"suits your needs.\n"
+"\n"
+"\n"
+"\n"
+"Monitor\n"
+"\n"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer.\n"
+"\n"
+"\n"
+"\n"
+"Resolution\n"
+"\n"
+"   Here you can choose the resolutions and color depths available for your\n"
+"hardware. Choose the one that best suits your needs (you will be able to\n"
+"change that after installation though). A sample of the chosen\n"
+"configuration is shown in the monitor.\n"
+"\n"
+"\n"
+"\n"
+"Test\n"
+"\n"
+"   the system will try to open a graphical screen at the desired\n"
+"resolution. If you can see the message during the test and answer \"%s\",\n"
+"then DrakX will proceed to the next step. If you cannot see the message, it\n"
+"means that some part of the autodetected configuration was incorrect and\n"
+"the test will automatically end after 12 seconds, bringing you back to the\n"
+"menu. Change settings until you get a correct graphical display.\n"
+"\n"
+"\n"
+"\n"
+"Options\n"
+"\n"
+"   Here you can choose whether you want to have your machine automatically\n"
+"switch to a graphical interface at boot. Obviously, you want to check\n"
+"\"%s\" if your machine is to act as a server, or if you were not successful\n"
+"in getting the display configured."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid "\t\tErase=%s"
+msgid "text width"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save to Tape on device: %s"
-msgstr ""
+msgid "Where do you want to mount device %s?"
+msgstr "คุณต้องการเม้าท์อุปกรณ์ %s ไว้ที่ใด?"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid " (multi-session)"
+msgid "The default lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid " on device: %s"
-msgstr "ดีไวซ์ของเม้าส์: %s\n"
+msgid "Interface \"%s\""
+msgstr "Interface %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "RW"
+msgid "With basic documentation (recommended!)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../mouse.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Burn to CD"
-msgstr ""
+msgid "1 button"
+msgstr "1 ปุ่ม"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
 "\n"
-"- Delete hard drive tar files after backup.\n"
+"There are %d unknown printers directly connected to your system"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/main.pm:1
 #, c-format
-msgid ""
-"\n"
-"- Save on Hard drive on path: %s\n"
+msgid "Test"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
 msgid ""
+"Arguments: (arg)\n"
 "\n"
-"- Other Files:\n"
+"Allow/Forbid direct root login."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Korea"
+msgstr "More"
+
+#: ../../interactive/stdio.pm:1
+#, fuzzy, c-format
+msgid "Your choice? (default `%s'%s) "
+msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Raw printer"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"\n"
-"- User Files:\n"
+msgid "official vendor name of the cpu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Vendor"
+msgstr "ยกเลิก"
+
+#: ../../standalone/drakgw:1
 #, c-format
-msgid ""
-"\n"
-"- System Files:\n"
-msgstr ""
+msgid "Interface %s"
+msgstr "Interface %s"
 
-#: ../../standalone/drakbackup:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"\n"
-"Backup Sources: \n"
-msgstr ""
+msgid "Configure mouse"
+msgstr "คอนฟิกเม้าส์"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Select user manually"
-msgstr ""
+msgid "Choose the mount points"
+msgstr "เลือกจุดเม้าท์"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../ugtk2.pm:1 ../../ugtk.pm:1
+#: ../../network/netconnect.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakboot:1
+#: ../../standalone/drakconnect:1 ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Backup Users"
+msgid "OK"
+msgstr "OK"
+
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Yugoslavian (latin)"
+msgstr "ยูโกสลาเวีย (เลย์เอ้าท์แบบละติน)"
+
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Installing"
+msgstr "กำลังติดตั้ง"
+
+#: ../../any.pm:1
+#, c-format
+msgid "Launch userdrake"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Backup system"
-msgstr "เซ็ตอัพระบบไฟล์"
+msgid "Is this an install or an upgrade?"
+msgstr "นี่เป็นการติดตั้งหรือการอัพเกรด"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "Please choose what you want to backup"
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "ISDN card"
+msgstr "Internal ISDN card"
 
-#: ../../standalone/drakbackup:1
+#: ../../share/advertising/02-community.pl:1
 #, c-format
-msgid "on Tape Device"
+msgid ""
+"To share your own knowledge and help build Linux software, join our "
+"discussion forums on our \"Community\" webpages."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "on CDROM"
+msgid ""
+"Congratulations, the network and Internet configuration is finished.\n"
+"The configuration will now be applied to your system.\n"
+"\n"
 msgstr ""
+"การปรับแต่ง internet/network เรียบร้อยแล้ว\n"
+"\n"
+"ค่าต่างๆจะถูกนำไปใช้เดี๋ยวนี้\n"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "across Network"
+msgid "\t-Hard drive.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "on Hard Drive"
+msgid ""
+"This step is activated only if an old GNU/Linux partition has been found on\n"
+"your machine.\n"
+"\n"
+"DrakX now needs to know if you want to perform a new install or an upgrade\n"
+"of an existing Mandrake Linux system:\n"
+"\n"
+" * \"%s\": For the most part, this completely wipes out the old system. If\n"
+"you wish to change how your hard drives are partitioned, or change the file\n"
+"system, you should use this option. However, depending on your partitioning\n"
+"scheme, you can prevent some of your existing data from being over-written.\n"
+"\n"
+" * \"%s\": this installation class allows you to update the packages\n"
+"currently installed on your Mandrake Linux system. Your current\n"
+"partitioning scheme and user data is not altered. Most of other\n"
+"configuration steps remain available, similar to a standard installation.\n"
+"\n"
+"Using the ``Upgrade'' option should work fine on Mandrake Linux systems\n"
+"running version \"8.1\" or later. Performing an Upgrade on versions prior\n"
+"to Mandrake Linux version \"8.1\" is not recommended."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Please choose where you want to backup"
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "Printer on remote CUPS server"
+msgstr "Remote CUPS server"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "More Options"
-msgstr "อ๊อปชั่นของโมดูล:"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid ""
+"Failed to remove the printer \"%s\" from Star Office/OpenOffice.org/GIMP."
+msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "When"
-msgstr "Wheel"
+msgid "delete"
+msgstr "ลบ"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "here if no."
+msgstr ""
+
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Where"
-msgstr "Wheel"
+msgid "DHCP host name"
+msgstr "ชื่อโฮสต์:"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "What"
+msgid "The maximum lease (in seconds)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1 ../../standalone/mousedrake:1
 #, c-format
-msgid "Delete Hard Drive tar files after backup to other media."
-msgstr ""
+msgid "Please choose which serial port your mouse is connected to."
+msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Send mail report after each backup to:"
+msgid "Did it work properly?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/level.pm:1
 #, c-format
-msgid ""
-"Please be sure that the cron daemon is included in your services. \n"
-"\n"
-"Note that currently all 'net' medias also use the hard drive."
+msgid "Poor"
+msgstr "ต่ำกว่ามาตรฐาน"
+
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "The DHCP start range"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the\n"
-"media for backup."
-msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
+#: ../../lang.pm:1
+#, c-format
+msgid "Grenada"
+msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid ""
-"Please choose the time \n"
-"interval between each backup"
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+#: ../../any.pm:1
+#, c-format
+msgid "Unsafe"
+msgstr "Unsafe"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use daemon"
-msgstr "ชื่อผู้ใช้"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid ", %s sectors"
+msgstr ", %s เซ็กเตอร์"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../install_any.pm:1 ../../interactive.pm:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1 ../../modules/interactive.pm:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "monthly"
-msgstr ""
+msgid "No"
+msgstr "ไม่ต้อง"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "weekly"
+msgid ""
+"Is your printer a multi-function device from HP or Sony (OfficeJet, PSC, "
+"LaserJet 1100/1200/1220/3200/3300 with scanner, Sony IJP-V100), an HP "
+"PhotoSmart or an HP LaserJet 2200?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "daily"
+msgid "Guadeloupe"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "hourly"
+msgid "could not find any font.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/keyboarddrake:1
 #, c-format
-msgid "HardDrive / NFS"
+msgid "Do you want the BackSpace to return Delete in console?"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "CDROM / DVDROM"
-msgstr ""
+msgid "Vertical refresh rate"
+msgstr "อัตราการรีเฟรชตามแนวตั้ง"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter the directory to save to:"
-msgstr "กรุณาทดสอบเม้าส์"
+#: ../../install_steps_auto_install.pm:1 ../../install_steps_stdio.pm:1
+#, c-format
+msgid "Entering step `%s'\n"
+msgstr "เข้าสู่ขั้นตอน `%s'\n"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to eject your tape after the backup."
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+#: ../../mouse.pm:1
+#, c-format
+msgid "Logitech MouseMan"
+msgstr "Logitech MouseMan"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Please check if you want to erase your tape before the backup."
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "Removing %s ..."
+msgstr "ความละเอียดของภาพ %s\n"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Please check if you want to use the non-rewinding device."
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "Niger"
+msgstr "สูง"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Please enter the device name to use for backup"
-msgstr ""
+msgid "No printer"
+msgstr "ไม่มีเครื่องพิมพ์"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Use tape to backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "alert configuration"
+msgstr "การคอนฟิก"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "No CD device defined!"
-msgstr "เลือกไฟล์"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "NetWare Printer Options"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์ในระบบเน็ตแวร์"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"Please enter your CD Writer device name\n"
-" ex: 0,1,0"
+msgid "%s BootSplash (%s) preview"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "โปรดเลือกพาร์ติชั่น"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "โปรดเลือกพาร์ติชั่น"
+#: ../../standalone/drakfloppy:1
+#, c-format
+msgid "General"
+msgstr "ทั่วไป"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid " Erase Now "
+msgid "Printing system: "
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you want to erase your RW media (1st Session)"
-msgstr "โปรดเลือกพาร์ติชั่น"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "โปรดเลือกพาร์ติชั่น"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please check for multisession CD"
-msgstr "โปรดเลือกพาร์ติชั่น"
+#: ../../steps.pm:1
+#, c-format
+msgid "Add a user"
+msgstr "เพิ่มผู้ใช้"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please choose your CD/DVD media size (Mb)"
-msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Network configuration (%d adapters)"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก (%d adapters)"
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1 ../../install_any.pm:1 ../../standalone.pm:1
 #, c-format
-msgid ""
-"Please choose your CD/DVD device\n"
-"(Press Enter to propogate settings to other fields.\n"
-"This field isn't necessary, only a tool to fill in the form.)"
+msgid "Mandatory package %s is missing"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use CD/DVDROM to backup"
+msgid "Philippines"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../interactive.pm:1 ../../my_gtk.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../interactive/http.pm:1
+#: ../../interactive/newt.pm:1 ../../interactive/stdio.pm:1
+#: ../../standalone/drakbackup:1 ../../standalone/draksec:1
 #, c-format
-msgid "Need hostname, username and password!"
-msgstr ""
+msgid "Ok"
+msgstr "ตกลง"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Remember this password"
-msgstr "ไม่มีรหัสผ่าน"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Print Queue Name"
+msgstr "ชื่อพรินต์คิว"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your password"
-msgstr "โปรดลองอีกครั้ง"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Do you want to use aboot?"
+msgstr "คุณต้องการใช้ aboot หรือไม่"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Please enter your login"
-msgstr "โปรดลองอีกครั้ง"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Belarusian"
+msgstr "Belarusian"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please enter the directory (or module) to\n"
-" put the backup on this host."
+"PDQ only supports local printers, remote LPD printers, and Socket/TCP "
+"printers.\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Please enter the host name or IP."
-msgstr "กรุณาทดสอบเม้าส์"
+msgid "Move files to the new partition"
+msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Other (not drakbackup)\n"
-"keys in place already"
+"Add here the CUPS servers whose printers you want to use. You only need to "
+"do this if the servers do not broadcast their printer information into the "
+"local network."
 msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, c-format
-msgid ""
-"  Transfer  \n"
-"Now"
-msgstr ""
+#, fuzzy, c-format
+msgid "Restore From Catalog"
+msgstr "กู้ตารางพาร์ติชั่น"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Pitcairn"
+msgstr "เครื่องพิมพ์"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid ""
-"Create/Transfer\n"
-"backup keys for SSH"
-msgstr ""
+msgid "IDE"
+msgstr "IDE"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "group :"
+msgstr "เวิร์กกรุ๊ป (workgroup)"
+
+#: ../../fs.pm:1
 #, c-format
-msgid "Use Expect for SSH"
+msgid "mounting partition %s in directory %s failed"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "Net Method:"
+msgid "Lilo screen"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Use network connection to backup"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
-
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Users"
-msgstr "ชื่อผู้ใช้"
+#: ../../bootloader.pm:1 ../../help.pm:1
+#, c-format
+msgid "LILO with graphical menu"
+msgstr "LILO แบบ graphical menu"
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Windows (FAT32)"
-msgstr "ลบ Windows(TM)"
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "Estimating"
+msgstr "การประเมิน"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Use Incremental Backups  (do not replace old backups)"
-msgstr ""
+msgid "You can't unselect this package. It is already installed"
+msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remove Selected"
-msgstr "ลบคิว"
+msgid ", printer \"%s\" on SMB/Windows server \"%s\""
+msgstr "SMB/วินโดวส์ 95/98/NT"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Do not include the browser cache"
-msgstr ""
+msgid "Go on anyway?"
+msgstr "ทำงานต่อหรือไม่?"
 
-#: ../../standalone/drakbackup:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Please check all users that you want to include in your backup."
-msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง "
+msgid "Looking for available packages and rebuilding rpm database..."
+msgstr "กำลังหาแพ็คเก็จที่มีอยู่"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"With this option you will be able to restore any version\n"
-" of your /etc directory."
+msgid "Does not appear to be recordable media!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../modules/interactive.pm:1
 #, c-format
-msgid "Do not include critical files (passwd, group, fstab)"
-msgstr ""
+msgid "Specify options"
+msgstr "ระบุอ๊อปชั่น"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Use incremental backup  (do not replace old backups)"
+msgid "Vanuatu"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup your System files. (/etc directory)"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
-
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"These options can backup and restore all files in your /etc directory.\n"
+msgid "Either the server name or the server's IP must be given!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../any.pm:1
 #, c-format
 msgid ""
+"A custom bootdisk provides a way of booting into your Linux system without\n"
+"depending on the normal bootloader. This is useful if you don't want to "
+"install\n"
+"SILO on your system, or another operating system removes SILO, or SILO "
+"doesn't\n"
+"work with your hardware configuration. A custom bootdisk can also be used "
+"with\n"
+"the Mandrake rescue image, making it much easier to recover from severe "
+"system\n"
+"failures.\n"
 "\n"
-"Please check all options that you need.\n"
+"If you want to create a bootdisk for your system, insert a floppy in the "
+"first\n"
+"drive and press \"Ok\"."
 msgstr ""
+"บูตดิสก์แบบแก้ไขได้ตามความต้องการของผู้ใช้ จะช่วยให้คุณสามารถบูตระบบลีนุกซ์\n"
+"ไม่ต้องเข้าสู่กระบวนการของบูตโหลดเดอร์ตามปกติ ซึ่งจะเป็นประโยชน์มากหากคุณ\n"
+"ไม่ได้ติดตั้ง LILO ลงในระบบของคุณ หรือหาก LILO ถูกลบออกไปเนื่องจากมีการ\n"
+"ระบบปฏิบัติการแบบอื่นๆ หรือ LILO ไม่ทำงานกับการคอนฟิกฮาร์ดแวร์ แผ่นบูตดิสก์\n"
+"จะสามารถใช้กับอิมเมจกู้คืนระบบของแมนเดร็ก ซึ่งจะช่วยให้คุณสามารถทำการกู้\n"
+"คืนระบบจากความผิดพลาดได้ด้วย คุณต้องการจะสร้างแผ่นบูตหรือไม่?\n"
+"ถ้าใช่ กรุณาใส่แผ่น Diskette และกด \"OK\""
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
+#, fuzzy, c-format
+msgid "You can't use an encrypted file system for mount point %s"
+msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
+
+#: ../../lang.pm:1
 #, c-format
-msgid "Select the files or directories and click on 'Add'"
+msgid "Norfolk Island"
 msgstr ""
 
-#: ../../standalone/drakbackup:1 ../../standalone/drakfont:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "File Selection"
-msgstr "เลือกกลุ่มแพ็คเก็จ"
+msgid "Theme installation failed!"
+msgstr "เลือกชุดการติดตั้ง"
 
-#: ../../standalone/drakbackup:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Can't create catalog!"
+msgid "Nothing to do"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid " Error while sending mail. \n"
-msgstr "มีปัญหากับการอ่านข้อมูลในไฟล์ %s"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Use for loopback"
+msgstr "ใช้สำหรับ loopback"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakbug:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via tape:\n"
-"\n"
+msgid "Mandrake Bug Report Tool"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via CD:\n"
-"\n"
-msgstr ""
+msgid "use pppoe"
+msgstr "ใช้ pppoe"
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Moving files to the new partition"
+msgstr "ไม่มีพื้นที่เพียงพอสำหรับ พาร์ติชั่น ใหม่"
+
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid ""
-"\n"
-"Drakbackup activities via %s:\n"
-"\n"
-msgstr ""
+msgid "XFree %s with EXPERIMENTAL 3D hardware acceleration"
+msgstr "XFree %s with EXPERIMENTAL 3D hardware acceleration"
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1 ../../interactive.pm:1
 #, c-format
-msgid ""
-"\n"
-" FTP connection problem: It was not possible to send your backup files by "
-"FTP.\n"
-msgstr ""
+msgid "Advanced"
+msgstr "Advanced"
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"file list sent by FTP: %s\n"
-" "
+msgid "Transfer"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "No changes to backup!"
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Dvorak (Swedish)"
+msgstr "Dvorak (US)"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Hard Disk Backup files..."
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "More Options"
+msgstr "อ๊อปชั่นของโมดูล:"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Backup Other files..."
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
+msgid "Afghanistan"
+msgstr "Iranian"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Hard Disk Backup Progress..."
+msgid "Delete Hard Drive tar files after backup to other media."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Backup User files..."
-msgstr "ไฟล์แบ็คอัพมีปัญหา"
-
-#: ../../standalone/drakbackup:1
+#: ../../services.pm:1
 #, c-format
-msgid "Backup system files..."
+msgid ""
+"cron is a standard UNIX program that runs user-specified programs\n"
+"at periodic scheduled times. vixie cron adds a number of features to the "
+"basic\n"
+"UNIX cron, including better security and more powerful configuration options."
 msgstr ""
+"cron คือโปรแกรมมาตรฐานของ Unix ที่สั่งทำงานโปรแกรมในเวลาที่กำหนด\n"
+"vixie cron เพิ่มความสามารถให้กับ UNIX cron ซึ่งรวมถึงเพิ่ม\n"
+"ระบบความปลอดภัยและ option การปรับแต่งอื่นๆ"
 
-#: ../../standalone/drakbackup:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No tape in %s!"
+msgid "Burundi"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Permission problem accessing CD."
+msgid "Add Client -->"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "This may take a moment to erase the media."
-msgstr ""
+msgid "Read carefully!"
+msgstr "โปรดอ่านอย่างถี่ถ้วน!"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not erasable media!"
+msgid "RW"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Does not appear to be recordable media!"
+msgid ""
+"Please,\n"
+"type in your tv norm and country"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/harddrake2:1
 #, c-format
-msgid "No CDR/DVDR in drive!"
-msgstr ""
+msgid "Port"
+msgstr "Port"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "WebDAV transfer failed!"
+msgid "No (experts only)"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "WebDAV remote site already in sync!"
+msgid "No kernel selected!"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Total progess"
-msgstr "กำลังตรวจสอบพอร์ต"
-
-#: ../../standalone/drakbackup:1
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid ""
-"Transfer successful\n"
-"You may want to verify you can login to the server with:\n"
-"\n"
-"ssh -i %s %s\\@%s\n"
-"\n"
-"without being prompted for a password."
-msgstr ""
+msgid "Press enter to boot the selected OS, 'e' to edit the"
+msgstr "กรุณากด enter ระบบที่ต้องการ 'e' เพื่อเปลี่ยนแปลง "
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "%s not responding"
+msgid "Set-GID"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Can't find %s on %s"
-msgstr "Adapter %s: %s"
+msgid "The encryption keys do not match"
+msgstr "รหัสผ่านไม่เหมือนกัน"
 
-#: ../../standalone/drakbackup:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Permission denied transferring %s to %s"
+msgid "Right \"Windows\" key"
 msgstr ""
 
 #: ../../standalone/drakbackup:1
-#, fuzzy, c-format
-msgid "Bad password on %s"
-msgstr "ไม่มีรหัสผ่าน"
-
-#: ../../standalone/drakbackup:1
 #, c-format
-msgid "No password prompt on %s at port %s"
+msgid "CDROM / DVDROM"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "ERROR: Cannot spawn %s."
+msgid "if set to yes, check empty password in /etc/shadow."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../help.pm:1
 #, c-format
-msgid "This may take a moment to generate the keys."
+msgid ""
+"Before continuing, you should carefully read the terms of the license. It\n"
+"covers the entire Mandrake Linux distribution. If you do agree with all the\n"
+"terms in it, check the \"%s\" box. If not, simply turn off your computer."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"%s exists, delete?\n"
+"Here is a list of the available printing options for the current printer:\n"
 "\n"
-"Warning: If you've already done this process you'll probably\n"
-" need to purge the entry from authorized_keys on the server."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"\n"
-"                    DrakBackup Report Details\n"
-"\n"
-"\n"
-msgstr ""
+msgid "Resolutions"
+msgstr "ความละเอียด"
 
-#: ../../standalone/drakbackup:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
 msgid ""
+"drakfirewall configurator\n"
 "\n"
-"                      DrakBackup Daemon Report\n"
-"\n"
-"\n"
+"This configures a personal firewall for this Mandrake Linux machine.\n"
+"For a powerful and dedicated firewall solution, please look to the\n"
+"specialized MandrakeSecurity Firewall distribution."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
 msgid ""
-"\n"
-"                      DrakBackup Report \n"
-"\n"
+"Please enter your username, password and domain name to access this host."
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Remove selected host"
+msgstr "ลบคิว"
+
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "INFO"
+msgid "Network configuration"
+msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "No sharing"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: ../../standalone/drakperm:1
+#, c-format
+msgid "Move selected rule down one level"
 msgstr ""
 
+#: ../../common.pm:1
+#, c-format
+msgid "TB"
+msgstr "TB"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check if you are using a DVDR device"
+msgstr "โปรดเลือกพาร์ติชั่น"
+
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
 msgid "FATAL"
 msgstr "FAT"
 
-#: ../../standalone/drakbackup:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "WARNING"
+msgid ""
+"The DHCP server will allow other computer to boot using PXE in the given "
+"range of address.\n"
+"\n"
+"The network address is %s using a netmask of %s.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/drakbackup:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Cron not available yet as non-root"
-msgstr ""
+msgid "Delete"
+msgstr "ลบ"
 
-#: ../../standalone/drakboot:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Installation of %s failed. The following error occured:"
-msgstr "การติดตั้ง %s ล้มเหลว ต่อไปนี้เป็นข้อผิดพลาดที่เกิดขึ้น"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Allow/Forbid reboot by the console user."
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "No, I don't want autologin"
-msgstr "ไม่ต้องการ autologin"
+msgid ""
+"I can setup your computer to automatically start the graphical interface "
+"(XFree) upon booting.\n"
+"Would you like XFree to start when you reboot?"
+msgstr ""
+"โปรแกรมจะกำหนดให้คอมพิวเตอร์ของคุณใช้งานแบบกราฟฟิคเมื่อเริ่มบูต\n"
+"คุณต้องการจะให้ทำงานแบบกราฟฟิคเมื่อรีบูตหรือไม่?"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Yes, I want autologin with this (user, desktop)"
-msgstr "ใช่แล้ว ผมต้องการ autologin สำหรับผู้ใช้รายนี้"
+msgid "Build the disk"
+msgstr "สร้างแผ่น"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/net_monitor:1
+#, fuzzy, c-format
+msgid "Disconnect %s"
+msgstr "ยกเลิกติดต่อ..."
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Launch the graphical environment when your system starts"
-msgstr "รัน X-Window เมื่อเริ่มทำงาน"
+msgid "Status:"
+msgstr "สถานะ:"
 
-#: ../../standalone/drakboot:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "System mode"
-msgstr "System mode"
+msgid "HTTP proxy"
+msgstr "HTTP proxy"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "SSH Server"
+msgstr "เซิร์ฟเวอร์ NIS"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bootsplash"
+msgid "\t-Network by rsync.\n"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "European protocol"
+msgstr "Boot Protocol"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Lilo screen"
+msgid ", printer \"%s\" on server \"%s\""
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../fsedit.pm:1 ../../install_steps_interactive.pm:1
+#: ../../install_steps.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/drakfont:1 ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"\n"
-"Select the theme for\n"
-"lilo and bootsplash,\n"
-"you can choose\n"
-"them separately"
-msgstr ""
+msgid "Error"
+msgstr "ผิดพลาด"
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Themes"
+msgid "allow \"su\""
 msgstr ""
 
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Splash selection"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
-
-#: ../../standalone/drakboot:1
+#: ../../lang.pm:1 ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid ""
-"You are currently using %s as your boot manager.\n"
-"Click on Configure to launch the setup wizard."
-msgstr ""
-"ยินดีต้อนรับสู่เครื่องมือในการติดต่อ internet แบบ share\n"
-"\n"
-"%s\n"
-"\n"
-"กด ``Ok'' ถ้าคุณต้องการเริ่มการทำงานของ setup wizard"
+msgid "Australia"
+msgstr "พอร์ตอนุกรม"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "LiLo and Bootsplash themes installation successfull"
+msgid "please wait during ttmkfdir..."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../Xconfig/card.pm:1
 #, fuzzy, c-format
-msgid "Theme installation failed!"
-msgstr "เลือกชุดการติดตั้ง"
+msgid "Configure only card \"%s\"%s"
+msgstr "คอนฟิกเฉพาะการ์ด \"%s\" (%s)"
 
-#: ../../standalone/drakboot:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Notice"
-msgstr "NoVideo"
+msgid "Level"
+msgstr "ระดับ"
 
-#: ../../standalone/drakboot:1
-#, c-format
-msgid "Relaunch 'lilo'"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Change the printing system"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../standalone/drakboot:1
-#, c-format
+#: ../../Xconfig/card.pm:1
+#, fuzzy, c-format
 msgid ""
-"Can't relaunch LiLo!\n"
-"Launch \"lilo\" as root in command line to complete LiLo theme installation."
+"Your system supports multiple head configuration.\n"
+"What do you want to do?"
 msgstr ""
+"เครื่องของคุณสนับสนุนการคอนฟิกแบบ multihead \n"
+"คุณต้องการทำอะไร?"
 
-#: ../../standalone/drakboot:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Make initrd 'mkinitrd -f /boot/initrd-%s.img %s'."
-msgstr ""
+msgid "Configure services"
+msgstr "ปรับแต่งการบริการต่างๆ"
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Can't launch mkinitrd -f /boot/initrd-%s.img %s."
+msgid "Broadcast Address:"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid ""
-"Can't write /etc/sysconfig/bootsplash\n"
-"File not found."
-msgstr ""
-
-#: ../../standalone/drakboot:1
-#, fuzzy, c-format
-msgid "Write %s"
-msgstr "XFree %s"
+msgid "mount failed: "
+msgstr "การเม้าท์ล้มเหลว: "
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Can't write /etc/sysconfig/bootsplash."
+msgid ""
+"the GNU/Linux kernel needs to run a calculation loop at boot time to "
+"initialize a timer counter.  Its result is stored as bogomips as a way to "
+"\"benchmark\" the cpu."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../any.pm:1
 #, c-format
-msgid "Lilo message not found"
-msgstr ""
+msgid "Image"
+msgstr "Image"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Copy %s to %s"
+msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org/GIMP."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../services.pm:1
+#, fuzzy, c-format
+msgid "Remote Administration"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
+
+#: ../../modules.pm:1
 #, c-format
-msgid "Backup %s to %s.old"
+msgid ""
+"PCMCIA support no longer exists for 2.2 kernels. Please use a 2.4 kernel."
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Create new theme"
-msgstr "สร้างพาร์ติชั่นใหม่"
+msgid "Selected All"
+msgstr "เลือกไฟล์"
 
-#: ../../standalone/drakboot:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid ""
-"Display theme\n"
-"under console"
+msgid "CUPS - Common Unix Printing System"
 msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../standalone/logdrake:1
 #, fuzzy, c-format
-msgid "Install themes"
-msgstr "ติดตั้งระบบ"
+msgid "Webmin Service"
+msgstr "อุปกรณ์"
 
-#: ../../standalone/drakboot:1
+#: ../../diskdrake/interactive.pm:1 ../../standalone/drakfloppy:1
+#, c-format
+msgid "device"
+msgstr "อุปกรณ์"
+
+#: ../../install_steps_interactive.pm:1 ../../standalone/drakxtv:1
+#, c-format
+msgid "All"
+msgstr "ทั้งหมด"
+
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Lilo/grub mode"
-msgstr "การหมุนโทรศัพท์ด้วยโมเด็ม"
+msgid "Which printing system (spooler) do you want to use?"
+msgstr "ประเภทของการพิมพ์ชนิดไหนที่คุณต้องการ"
 
-#: ../../standalone/drakboot:1
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Yaboot mode"
-msgstr "Boot mode"
+msgid "Greece"
+msgstr "กรีก"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "<control>Q"
-msgstr "<control>Q"
+msgid "An error occurred"
+msgstr "มีปัญหาเกิดขึ้น"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/logdrake:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "/File/_Quit"
-msgstr "/ไฟล์/_เลิก"
+msgid ""
+"This package must be upgraded.\n"
+"Are you sure you want to deselect it?"
+msgstr ""
+"แพกเกจนี้จำเป็นต้องถูก upgrade\n"
+"คุณแน่ใจว่าจะไม่เลือกมันหรือ"
 
-#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Tamil (Typewriter-layout)"
+msgstr "อาร์เมเนียน (พิมพ์ดีด)"
+
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "/_File"
-msgstr "/_ไฟล์"
+msgid "manual"
+msgstr ""
 
-#: ../../standalone/drakboot:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Boot Style Configuration"
-msgstr "Boot Style Configuration"
+msgid "Printer manufacturer, model, driver"
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfloppy:1
 #, fuzzy, c-format
-msgid "No browser available! Please install one"
-msgstr "คุณสามารถเลือกภาษาอื่นซึ่งจะสามารถใช้ได้หลังติดตั้ง"
+msgid ""
+"There is no medium or it is write-protected for device %s.\n"
+"Please insert one."
+msgstr ""
+"ยังไม่มีอุปกรณ์ใน %s \n"
+"กรุณาใส่อุปกรณ์ด้วย"
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "connecting to Bugzilla wizard ..."
+msgid ""
+"Directory %s already contains data\n"
+"(%s)"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Package not installed"
-msgstr "ออกจากการติดตั้ง"
+msgid "Printer on NetWare server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Not installed"
-msgstr "ออกจากการติดตั้ง"
+#: ../../any.pm:1
+#, c-format
+msgid "Give the ram size in MB"
+msgstr "ให้ป้อนข้อมูลของขนาดหน่วยความจำเป็น Mb"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, c-format
-msgid "Standalone Tools"
-msgstr ""
+msgid "Real name"
+msgstr "ชื่อเต็ม"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Report"
-msgstr "Port"
+msgid "done"
+msgstr "ทำเรียบร้อยแล้ว"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please uncheck or remove it on next time."
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Higher"
+msgstr "สูง"
+
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the partitions you want to format"
+msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"
+
+#: ../../standalone/drakxtv:1
 #, c-format
 msgid ""
+"No TV Card has been detected on your machine. Please verify that a Linux-"
+"supported Video/TV Card is correctly plugged in.\n"
 "\n"
 "\n"
-"To submit a bug report, click on the button report.\n"
-"This will open  a web browser window  on https://drakbug.mandrakesoft.com\n"
-" where you'll find a form to fill in.The information displayed above will "
-"be \n"
-"transferred to that server\n"
+"You can visit our hardware database at:\n"
+"\n"
 "\n"
+"http://www.linux-mandrake.com/en/hardware.php3"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Release: "
-msgstr "โปรดรอสักครู่"
+msgid "Can't find %s on %s"
+msgstr "Adapter %s: %s"
 
-#: ../../standalone/drakbug:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Kernel:"
-msgstr ""
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Package: "
-msgstr "เลือกกลุ่มแพ็คเก็จ"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Application:"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
-
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Configuration Wizards"
-msgstr "Network Configuration Wizard"
+msgid "Japanese 106 keys"
+msgstr "Japanese 106 keys"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Userdrake"
-msgstr "เครื่องพิมพ์"
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "This will take a few minutes."
+msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Windows Migration tool"
+msgid "Burkina Faso"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Urpmi"
+msgid "Use scanners on remote computers"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Software Manager"
-msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
+msgid "Delete selected rule"
+msgstr "ลบคิว"
 
-#: ../../standalone/drakbug:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Remote Control"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Accessing printers on remote CUPS servers"
+msgstr "Remote CUPS server"
 
-#: ../../standalone/drakbug:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "Msec"
-msgstr "Mouse"
+msgid "Insert a floppy in %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ลงในไดรว์ %s"
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Menudrake"
-msgstr "แบบผู้เชี่ยวชาญ (Expert)"
+#: ../../lang.pm:1
+#, c-format
+msgid "Maldives"
+msgstr ""
 
-#: ../../standalone/drakbug:1
-#, fuzzy, c-format
-msgid "Mandrake Online"
-msgstr "Control Center"
+#: ../../any.pm:1
+#, c-format
+msgid "compact"
+msgstr "แบบอัด (compact)"
 
-#: ../../standalone/drakbug:1
+#: ../../common.pm:1
 #, c-format
-msgid "HardDrake"
-msgstr ""
+msgid "1 minute"
+msgstr "1 นาที"
 
-#: ../../standalone/drakbug:1
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "on channel %d id %d\n"
+msgstr "บนบัส %d id %d\n"
+
+#: ../../printer/main.pm:1
 #, c-format
-msgid "Synchronization tool"
+msgid ", multi-function device"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../lang.pm:1
 #, c-format
-msgid "First Time Wizard"
+msgid "Laos"
 msgstr ""
 
-#: ../../standalone/drakbug:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Mandrake Control Center"
-msgstr "Control Center"
+msgid "There is no FAT partition to resize (or not enough space left)"
+msgstr "ไม่มี พาร์ติชั่น FAT เพื่อทำการเปี่ยนขนาดหรือให้ใช้เป็น loopback (พื้นที่ไม่พอ)"
 
-#: ../../standalone/drakbug:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "Mandrake Bug Report Tool"
+msgid "Up"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Parameters"
-msgstr "Parameters"
+msgid "Firewall"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakxtv:1
 #, c-format
-msgid "Internet Connection Configuration"
-msgstr "การปรับแต่งการติดต่อเข้า internet"
+msgid "Area:"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "DHCP Client"
-msgstr "DHCP Client"
+msgid "(E)IDE/ATA controllers"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Ethernet Card"
-msgstr "Ethernet Card"
+msgid "Printer Server"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/net_monitor:1
 #, c-format
-msgid "Gateway"
-msgstr "เกตเวย์"
+msgid "Disconnection from the Internet complete."
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
-#, c-format
-msgid "Connection type: "
-msgstr "ชนิดการเชื่อมต่อ"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Custom configuration"
+msgstr "การคอนฟิก"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Profile: "
-msgstr "Profile: "
+msgid ""
+"Please indicate where the installation image will be available.\n"
+"\n"
+"If you do not have an existing directory, please copy the CD or DVD "
+"contents.\n"
+"\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet connection configuration"
-msgstr "การปรับแต่งการติดต่อเข้า internet"
+msgid "Saint Pierre and Miquelon"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"You don't have an Internet connection.\n"
-"Create one first by clicking on 'Configure'"
+"\n"
+"Restore Backup Problems:\n"
+"\n"
+"During the restore step, Drakbackup will verify all your\n"
+"backup files before restoring them.\n"
+"Before the restore, Drakbackup will remove \n"
+"your original directory, and you will loose all your \n"
+"data. It is important to be careful and not modify the \n"
+"backup data files by hand.\n"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"This interface has not been configured yet.\n"
-"Launch the configuration wizard in the main window"
+msgid "saving Bootsplash theme..."
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "activate now"
-msgstr "แอ็คทีฟ"
+msgid "Portugal"
+msgstr "Port"
 
-#: ../../standalone/drakconnect:1
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "Do you have another one?"
+msgstr "คุณมีอันอื่นๆอีกหรือไม่?"
+
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "deactivate now"
-msgstr "แอ็คทีฟ"
+msgid ", printing to %s"
+msgstr "ข้อผิดพลาดถูกบันทึกในไฟล์ %s"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "DHCP client"
-msgstr "DHCP client"
+#: ../../network/network.pm:1
+#, fuzzy, c-format
+msgid "Assign host name from DHCP address"
+msgstr "กรุณาทดสอบเม้าส์"
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Started on boot"
-msgstr "เริ่มทำงานตอน boot"
+msgid "Toggle to normal mode"
+msgstr "สำหรับผู้ชำนาญ > ปกติ"
 
-#: ../../standalone/drakconnect:1
+#: ../../mouse.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Boot Protocol"
-msgstr "Boot Protocol"
+msgid "Generic"
+msgstr "Generic"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Adapter %s: %s"
-msgstr "Adapter %s: %s"
+#: ../../diskdrake/interactive.pm:1
+#, fuzzy, c-format
+msgid "Cylinder %d to %d\n"
+msgstr "ไซลินเดอร์ %d เป็น ไซลินเดอร์ %d\n"
 
 #: ../../standalone/drakconnect:1
 #, c-format
-msgid "LAN Configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "New profile..."
+msgstr "profile ใหม่..."
 
-#: ../../standalone/drakconnect:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "LAN configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "Which disk do you want to move it to?"
+msgstr "คุณต้องการจะย้ายไปดิสก์ไหน"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid ""
-"You don't have any configured interface.\n"
-"Configure them first by clicking on 'Configure'"
+msgid "Display logo on Console"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Connect..."
-msgstr "ติดต่อ"
+#: ../../install_steps_interactive.pm:1
+#, fuzzy, c-format
+msgid "Windows Domain"
+msgstr "โดเมน NIS"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Disconnect..."
-msgstr "ยกเลิกติดต่อ..."
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "Interface %s (on network %s)"
+msgstr "Interface %s (using module %s)"
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Not connected"
-msgstr "ไม่เชื่อมต่อ"
+msgid "INFO"
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Connected"
-msgstr "เชื่อมต่ออยู่"
+msgid "Wallis and Futuna"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid ""
-"Warning, another Internet connection has been detected, maybe using your "
-"network"
+msgid "Need to create /etc/dhcpd.conf first!"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Interface:"
-msgstr "Interface:"
+msgid "Is FPU present"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Gateway:"
-msgstr "เกตเวย์:"
+msgid "There are no scanners found which are available on your system.\n"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../services.pm:1
 #, c-format
-msgid "Apply"
-msgstr "มีผลทันที"
+msgid ""
+"No additional information\n"
+"about this service, sorry."
+msgstr ""
+"ไม่มีข้อมูลเพิ่มเติม\n"
+"สำหรับการบริการนี้ ขอโทษครับ"
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Click here to launch the wizard ->"
+msgid "Build Single NIC -->"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "Wizard..."
-msgstr "Wizard..."
+msgid "Is this correct?"
+msgstr "ถูกต้องหรือไม่?"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Status:"
-msgstr "สถานะ:"
+msgid "Marshall Islands"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Type:"
-msgstr "ประเภท: "
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Windows (FAT32)"
+msgstr "ลบ Windows(TM)"
 
-#: ../../standalone/drakconnect:1
+#: ../../steps.pm:1
+#, fuzzy, c-format
+msgid "Root password"
+msgstr "ไม่มีรหัสผ่าน"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "Internet access"
-msgstr "การติดต่อ internet"
+msgid "Build All Kernels -->"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Hostname: "
-msgstr "ชื่อโฮสต์:"
+msgid "if set to yes, report unowned files."
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Configure Local Area Network..."
-msgstr "ปรับแต่งระบบเน็ตเวิร์กภายใน..."
+msgid ""
+"You don't have a swap partition.\n"
+"\n"
+"Continue anyway?"
+msgstr ""
+"คุณไม่มีสวอปพาร์ติชั่นเลย\n"
+"\n"
+"ต้องการจะทำต่อหรือไม่?"
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "State"
-msgstr "สถานะ:"
+msgid "Server IP missing!"
+msgstr "ชื่อของเครื่องพิมพ์"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Driver"
-msgstr "Driver"
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Suriname"
+msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
 
-#: ../../standalone/drakconnect:1
-#, c-format
-msgid "Protocol"
-msgstr "Protocol"
+#: ../../any.pm:1
+#, fuzzy, c-format
+msgid "Enable ACPI"
+msgstr "Enable CD Boot?"
 
-#: ../../standalone/drakconnect:1
+#: ../../help.pm:1
 #, c-format
-msgid "Interface"
-msgstr "Interface"
+msgid "Graphical Environment"
+msgstr "การทำงานแบบกราฟฟิก"
 
-#: ../../standalone/drakconnect:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Configure Internet Access..."
-msgstr "ปรับแต่งการติดต่อเข้า internet"
+msgid "Gibraltar"
+msgstr ""
 
-#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Wait please"
+msgid "on Tape Device"
 msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../network/modem.pm:1
+#, fuzzy, c-format
+msgid "Do nothing"
+msgstr "but not matching"
+
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Delete Client"
+msgstr "DHCP Client"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Name of the profile to create (the new profile is created as a copy of the "
-"current one) :"
-msgstr ""
+msgid "Filesystem type: "
+msgstr "ประเภทของระบบไฟล์: "
 
-#: ../../standalone/drakconnect:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Starting network..."
+msgstr "ทดสอบ connection..."
+
+#: ../../lang.pm:1
 #, c-format
-msgid "New profile..."
-msgstr "profile ใหม่..."
+msgid "Vietnam"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "/_Fields description"
+msgstr "รายละเอียด"
+
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "Profile to delete:"
-msgstr "profile ที่ต้องการลบ:"
+msgid "Optimize your security by using Mandrake Linux"
+msgstr ""
 
-#: ../../standalone/drakconnect:1
+#: ../../install_steps_gtk.pm:1 ../../interactive.pm:1 ../../ugtk2.pm:1
+#: ../../Xconfig/resolution_and_depth.pm:1 ../../diskdrake/hd_gtk.pm:1
+#: ../../interactive/gtk.pm:1 ../../standalone/drakTermServ:1
+#: ../../standalone/drakbackup:1 ../../standalone/drakbug:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Del profile..."
-msgstr "ลบ profile..."
+msgid "Help"
+msgstr "ความช่วยเหลือ"
 
-#: ../../standalone/drakconnect:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Network configuration (%d adapters)"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก (%d adapters)"
+msgid "Your personal phone number"
+msgstr "เบอร์โทรศัพท์ส่วนตัว"
 
-#: ../../standalone/drakedm:1
+#: ../../install_interactive.pm:1
 #, c-format
+msgid "Which size do you want to keep for Windows on"
+msgstr "คุณต้องการเก็บ Windows ไว้ในขนาดใหน"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"X11 Display Manager allows you to graphically log\n"
-"into your system with the X Window System running and supports running\n"
-"several different X sessions on your local machine at the same time."
+"Test page(s) have been sent to the printer.\n"
+"It may take some time before the printer starts.\n"
 msgstr ""
+"แผ่นทดสอบการพิมพ์ได้ถูกส่งไปที่เครื่องพิมพ์แล้ว\n"
+"กรุณารอสักครู่\n"
+"มันทำงานถูกต้องใหมครับ"
 
-#: ../../standalone/drakedm:1
-#, c-format
-msgid "Choosing a display manager"
-msgstr ""
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Username required"
+msgstr "ชื่อผู้ใช้"
 
-#: ../../standalone/drakfloppy:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Unable to properly close mkbootdisk: \n"
-" %s \n"
-" %s"
+"Depending on the default language you chose in Section , DrakX will\n"
+"automatically select a particular type of keyboard configuration. However,\n"
+"you may not have a keyboard that corresponds exactly to your language: for\n"
+"example, if you are an English speaking Swiss person, you may have a Swiss\n"
+"keyboard. Or if you speak English but are located in Quebec, you may find\n"
+"yourself in the same situation where your native language and keyboard do\n"
+"not match. In either case, this installation step will allow you to select\n"
+"an appropriate keyboard from a list.\n"
+"\n"
+"Click on the \"%s\" button to be presented with the complete list of\n"
+"supported keyboards.\n"
+"\n"
+"If you choose a keyboard layout based on a non-Latin alphabet, the next\n"
+"dialog will allow you to choose the key binding that will switch the\n"
+"keyboard between the Latin and non-Latin layouts."
 msgstr ""
-"ไม่สามารถปิด mkbootdisk ได้อย่างสมบูรณ์: \n"
-"%s \n"
-"%s"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Unable to fork: %s"
-msgstr "ไม่สามารถ forkได้.%s"
+msgid "SMB (Windows 9x/NT) Printer Options"
+msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบ SMB (เครื่องพิมพ์ในระบบวินโดวส์ 9x/NT)"
 
-#: ../../standalone/drakfloppy:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
 msgid ""
-"There is no medium or it is write-protected for device %s.\n"
-"Please insert one."
+"Arguments: (arg)\n"
+"\n"
+"Accept/Refuse bogus IPv4 error messages."
 msgstr ""
-"ยังไม่มีอุปกรณ์ใน %s \n"
-"กรุณาใส่อุปกรณ์ด้วย"
 
 #: ../../standalone/drakfloppy:1
 #, c-format
-msgid "Be sure a media is present for the device %s"
-msgstr "ตรวจให้แน่ใจว่ามีอุปกรณ์อยู่ใน%s"
+msgid "mkinitrd optional arguments"
+msgstr "mkinitrd optional arguments"
 
-#: ../../standalone/drakfloppy:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Build the disk"
-msgstr "สร้างแผ่น"
+msgid ""
+"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
+"Kmail, create your documents with OpenOffice.org."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Output"
-msgstr "Output"
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Protocol for the rest of the world"
+msgstr "Rest of the world"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Remove a module"
-msgstr "ลบทิ้ง 1 module"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Print test pages"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
 
-#: ../../standalone/drakfloppy:1
+#: ../../Xconfig/card.pm:1
 #, c-format
-msgid "Add a module"
-msgstr "เพิ่ม 1 module"
+msgid "64 MB or more"
+msgstr "64 MB หรือมากกว่า"
 
-#: ../../standalone/drakfloppy:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "omit scsi modules"
-msgstr "ยกเว้น scsi modules"
+msgid ""
+"Please select the test pages you want to print.\n"
+"Note: the photo test page can take a rather long time to get printed and on "
+"laser printers with too low memory it can even not come out. In most cases "
+"it is enough to print the standard test page."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "if needed"
-msgstr "ถ้าต้องการ"
+msgid "Please select the device where your %s is attached"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "omit raid modules"
-msgstr "ยกเว้น raid modules"
+msgid "Not formatted\n"
+msgstr "ยังไม่ได้ฟอร์แมต\n"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/draksec:1
 #, c-format
-msgid "force"
-msgstr "บังคับ"
+msgid "Periodic Checks"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "mkinitrd optional arguments"
-msgstr "mkinitrd optional arguments"
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "PXE Server Configuration"
+msgstr "การปรับแต่ง LAN"
 
-#: ../../standalone/drakfloppy:1
-#, c-format
-msgid "Expert Area"
-msgstr "ส่วนของผู้เชี่ยวชาญ"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Backup the system files before:"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
 
-#: ../../standalone/drakfloppy:1
+#: ../../security/level.pm:1
 #, c-format
-msgid "kernel version"
-msgstr "kernel version"
+msgid ""
+"This is the standard security recommended for a computer that will be used "
+"to connect to the Internet as a client."
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../any.pm:1
 #, c-format
-msgid "default"
-msgstr "default"
+msgid "First floppy drive"
+msgstr "Floppy Drive เครื่องแรก"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "General"
-msgstr "ทั่วไป"
+msgid "/File/_Quit"
+msgstr "/ไฟล์/_เลิก"
 
-#: ../../standalone/drakfloppy:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "boot disk creation"
-msgstr "สร้าง boot disk"
+msgid "Dvorak"
+msgstr "Dvorak"
 
-#: ../../standalone/drakfloppy:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "drakfloppy"
-msgstr "drakfloppy"
+msgid "Choose the new size"
+msgstr "เลือกขนาดใหม่"
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Size"
-msgstr "ขนาด"
+msgid "Media class"
+msgstr ""
 
-#: ../../standalone/drakfloppy:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Module name"
-msgstr "ชี่อ module"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Uninstall"
-msgstr "ออกจากการติดตั้ง"
+msgid "The %s is not known by this version of Scannerdrake."
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Remove fonts on your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+msgid "Faroe Islands"
+msgstr "ไอซ์แลนด์"
 
 #: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Initial tests"
-msgstr "ข้อความ init"
+msgid "Restart XFS"
+msgstr "จำเพาะ"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Post Install"
-msgstr "ติดตั้ง"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Add host/network"
+msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Install & convert Fonts"
+msgid ""
+"if set to yes, check for empty passwords, for no password in /etc/shadow and "
+"for users with the 0 id other than root."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Copy fonts on your system"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+msgid "Please enter the directory to save to:"
+msgstr "กรุณาทดสอบเม้าส์"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Remove List"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Model name"
+msgstr "ชี่อ module"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Selected All"
-msgstr "เลือกไฟล์"
+msgid "Albania"
+msgstr "Iranian"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Unselected All"
+msgid "No CDR/DVDR in drive!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "here if no."
+msgid "British Indian Ocean Territory"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakconnect:1
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid "click here if you are sure."
+msgid "Normal Mode"
+msgstr "โหมดธรรมดา"
+
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"Please be sure that the cron daemon is included in your services. \n"
+"\n"
+"Note that currently all 'net' medias also use the hard drive."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Install List"
-msgstr "ติดตั้งระบบ"
+msgid "Printer connection type"
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Select the font file or directory and click on 'Add'"
+msgid "No network adapter on your system!"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "Network %s"
+msgstr "Network interface"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Malayalam"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Before installing any fonts, be sure that you have the right to use and "
-"install them on your system.\n"
-"\n"
-"-You can install the fonts the normal way. In rare cases, bogus fonts may "
-"hang up your X Server."
+msgid "Option %s out of range!"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Generic Printers"
-msgstr "เครื่องพิมพ์"
+msgid "Connect %s"
+msgstr "เชื่อมต่ออยู่"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Abiword"
-msgstr "เลิก"
+msgid "Restarting CUPS..."
+msgstr "จำเพาะ"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "StarOffice"
-msgstr "ดี"
+msgid "Printing/Scanning/Photo Cards on \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps.pm:1
 #, c-format
-msgid "Ghostscript"
+msgid "Duplicate mount point %s"
+msgstr "ทำซ้ำจุดเม้าท์ %s"
+
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run chkrootkit checks."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1
+#, c-format
+msgid "Connection Configuration"
+msgstr "การคอนฟิก Connection"
+
+#: ../../harddrake/v4l.pm:1
 #, fuzzy, c-format
-msgid "Choose the applications that will support the fonts:"
-msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"
+msgid "Unknown|Generic"
+msgstr "Generic"
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
+"At the time you are installing Mandrake Linux, it is likely that some\n"
+"packages have been updated since the initial release. Bugs may have been\n"
+"fixed, security issues resolved. To allow you to benefit from these\n"
+"updates, you are now able to download them from the Internet. Check \"%s\"\n"
+"if you have a working Internet connection, or \"%s\" if you prefer to\n"
+"install updated packages later.\n"
 "\n"
-" Copyright (C) 2001-2002 by MandrakeSoft \n"
-"\tDUPONT Sebastien (original version)\n"
-"        CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
-"\n"
-" This program is free software; you can redistribute it and/or modify\n"
-" it under the terms of the GNU General Public License as published by\n"
-" the Free Software Foundation; either version 2, or (at your option)\n"
-" any later version.\n"
-"\n"
-" This program is distributed in the hope that it will be useful,\n"
-" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
-" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
-" GNU General Public License for more details.\n"
-"\n"
-" You should have received a copy of the GNU General Public License\n"
-" along with this program; if not, write to the Free Software\n"
-" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
-"\n"
-" Thanks:\n"
-"    -  pfm2afm:   \n"
-"\t by Ken Borgendale:\n"
-"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
-"    -  type1inst:\n"
-"\t by James Macnicol: \n"
-"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
-"    -  ttf2pt1:   \n"
-"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
-"             Convert ttf font files to afm and pfb fonts\n"
+"Choosing \"%s\" will display a list of places from which updates can be\n"
+"retrieved. You should choose one nearer to you. A package-selection tree\n"
+"will appear: review the selection, and press \"%s\" to retrieve and install\n"
+"the selected package(s), or \"%s\" to abort."
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "About"
-msgstr "เลิก"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Font List"
-msgstr "กำหนดจุดเม้าท์"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Advanced Options"
-msgstr "การปรับแต่ง LAN"
+#: ../../install_steps_interactive.pm:1 ../../Xconfig/main.pm:1
+#: ../../diskdrake/dav.pm:1 ../../printer/printerdrake.pm:1
+#: ../../standalone/drakperm:1 ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Quit"
+msgstr "ออก"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Uninstall Fonts"
+msgid "Myanmar"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Get Windows Fonts"
-msgstr ""
+msgid "Auto allocate"
+msgstr "กำหนดแบบอัตโนมัติ"
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Import Fonts"
-msgstr "ฟอร์แมตพาร์ติชั่น"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Check bad blocks?"
+msgstr "ตรวจสอบ bad blocks"
 
-#: ../../standalone/drakfont:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "done"
-msgstr "ทำเรียบร้อยแล้ว"
+msgid "Other MultiMedia devices"
+msgstr "อื่นๆ"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "xfs restart"
-msgstr "จำเพาะ"
+msgid "No remote machines"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Suppress Fonts Files"
+msgid ""
+"\n"
+"Welcome to the Printer Setup Wizard\n"
+"\n"
+"This wizard will help you to install your printer(s) connected to this "
+"computer.\n"
+"\n"
+"If you have printer(s) connected to this machine, Please plug it/them in on "
+"this computer and turn it/them on so that it/they can be auto-detected.\n"
+"\n"
+" Click on \"Next\" when you are ready, and on \"Cancel\" if you do not want "
+"to set up your printer(s) now."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Restart XFS"
-msgstr "จำเพาะ"
+msgid "Authentication NIS"
+msgstr "การตรวจสอบสิทธิ์การใช้งานของ NIS"
 
-#: ../../standalone/drakfont:1
+#: ../../any.pm:1
 #, c-format
-msgid "Suppress Temporary Files"
-msgstr ""
+msgid ""
+"Option ``Restrict command line options'' is of no use without a password"
+msgstr "อ็อปชั่น ``อ๊อปชั่นจำเพาะที่ใช้กับคอมมานด์ไลน์'' จะต้องใส่รหัสผ่านด้วย"
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "type1inst building"
-msgstr ""
+msgid "Internet Connection Sharing currently enabled"
+msgstr "การเชื่อมต่อ internet แบบ share ได้ทำงานแล้ว"
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "pfm fonts conversion"
-msgstr ""
+msgid "Card IO_0"
+msgstr "Card IO_0"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "ttf fonts conversion"
+msgid "United Arab Emirates"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Ghostscript referencing"
-msgstr ""
+msgid "Card IO_1"
+msgstr "Card IO_1"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Fonts conversion"
+msgid "Thailand"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "True Type install done"
+msgid "Routers:"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "please wait during ttmkfdir..."
+msgid "Kazakhstan"
 msgstr ""
 
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "True Type fonts installation"
-msgstr "กำลังเตรียมการติดตั้ง"
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "Fonts copy"
-msgstr "ฟอร์แมต Floppy"
-
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Search for fonts in installed list"
+msgid "Display all available remote CUPS printers"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_newt.pm:1
 #, c-format
-msgid "could not find any font.\n"
-msgstr ""
+msgid "Mandrake Linux Installation %s"
+msgstr "การติดตั้งลีนุกซ์-แมนเดรก %s"
 
-#: ../../standalone/drakfont:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Reselect correct fonts"
-msgstr ""
+msgid "Thai keyboard"
+msgstr "ไทย"
 
-#: ../../standalone/drakfont:1
+#: ../../network/modem.pm:1
 #, c-format
-msgid "could not find any font in your mounted partitions"
-msgstr ""
-
-#: ../../standalone/drakfont:1
-#, fuzzy, c-format
-msgid "no fonts found"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+msgid "Dialup options"
+msgstr "อ็อปชั่นของการหมุนโทรศัพท์"
 
-#: ../../standalone/drakfont:1
+#: ../../lang.pm:1
 #, c-format
-msgid "parse all fonts"
+msgid "Bouvet Island"
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Unselect fonts installed"
+msgid "If no port is given, 631 will be taken as default."
 msgstr ""
 
-#: ../../standalone/drakfont:1
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Search installed fonts"
-msgstr ""
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
 msgid ""
-"Welcome to the Internet Connection Sharing utility!\n"
-"\n"
-"%s\n"
+"Change your Cd-Rom!\n"
 "\n"
-"Click on Configure to launch the setup wizard."
+"Please insert the Cd-Rom labelled \"%s\" in your drive and press Ok when "
+"done.\n"
+"If you don't have it, press Cancel to avoid installation from this Cd-Rom."
 msgstr ""
-"ยินดีต้อนรับสู่เครื่องมือในการติดต่อ internet แบบ share\n"
-"\n"
-"%s\n"
+"เปลี่ยน  CD-ROM\n"
 "\n"
-"กด ``Ok'' ถ้าคุณต้องการเริ่มการทำงานของ setup wizard"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "Internet Connection Sharing configuration"
-msgstr "การเชื่อมต่อ Internet และการปรับแต่ง"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "No Internet Connection Sharing has ever been configured."
-msgstr "ไม่มีการเชื่อมต่อกับ Internet แบบ sharing"
+"กรุณาใส่ CD-ROM \"%s\" และกด OK\n"
+"ถ้่าคุณไม่มี กรุณากด ยกเลิก (cancel) เพื่อหลีกเลี่ยงการติดตั้งจาก CD-ROM นี้"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "The setup has already been done, and it's currently enabled."
-msgstr "การปรับแต่งเรียบร้อยแล้วและตอนนี้ก็ได้ทำงานแล้ว"
+msgid "Polish"
+msgstr "โปแลนด์"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "The setup has already been done, but it's currently disabled."
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Mandrake Online"
+msgstr "Control Center"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Everything has been configured.\n"
-"You may now share Internet connection with other computers on your Local "
-"Area Network, using automatic network configuration (DHCP)."
+msgid "\t-Network by webdav.\n"
 msgstr ""
-"ทุกอย่างได้ถูกทำการปรับแต่งเรียบร้อยแล้ว\n"
-"คุณสามารถใช้อินเตอร์เนตบนคอมพิวเตอร์อื่นๆใน LAN โดยใช้ (DHCP)"
 
 #: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
 #, c-format
-msgid "Problems installing package %s"
-msgstr "ปัญหาการติดตั้งแพ็คเก็จ %s"
+msgid ""
+"No ethernet network adapter has been detected on your system. Please run the "
+"hardware configuration tool."
+msgstr "ไม่สามารถตรวจพบ network adapter บนเครื่องนี้ กรุณารันโปรแกรมปรับแต่ง hardware"
 
+#: ../../network/network.pm:1 ../../standalone/drakconnect:1
 #: ../../standalone/drakgw:1
 #, c-format
-msgid "Configuring scripts, installing software, starting servers..."
-msgstr "กำลังปรับแต่ง scripts ติดตั้งโปรแกรม และเริ่มทำงาน servers..."
+msgid "Netmask"
+msgstr "เน็ตมาสก์"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/hd_gtk.pm:1
+#, fuzzy, c-format
+msgid "No hard drives found"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+
+#: ../../mouse.pm:1
 #, c-format
-msgid "Configuring..."
-msgstr "กำลังทำการคอนฟิก"
+msgid "Logitech CC Series"
+msgstr "Logitech CC Series"
 
-#: ../../standalone/drakgw:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "Potential LAN address conflict found in current config of %s!\n"
-msgstr "มีความขัดแย้งของ LAN address ซึ่งเจอในคอนฟิกปัจจุบันใน %s!\n"
+msgid "2 buttons"
+msgstr "2 buttons"
 
-#: ../../standalone/drakgw:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "The Local Network did not finish with `.0', bailing out."
-msgstr ""
+msgid "What kind is your ISDN connection?"
+msgstr "การติดต่อแบบ ISDN ของคุณเป็นแบบใด"
 
-#: ../../standalone/drakgw:1
+#: ../../any.pm:1
 #, c-format
-msgid "Re-configure interface and DHCP server"
-msgstr ""
+msgid "Label"
+msgstr "Label"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "The maximum lease (in seconds)"
-msgstr ""
+msgid "Save on floppy"
+msgstr "บันทึกลงแผ่นฟล้อปปี้"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printer auto-detection"
+msgstr "ใช้ auto detection"
+
+#: ../../network/isdn.pm:1
+#, fuzzy, c-format
+msgid "Which of the following is your ISDN card?"
+msgstr "คุณใช้การ์ด ISDN ใด?"
+
+#: ../../services.pm:1
 #, c-format
-msgid "The default lease (in seconds)"
+msgid ""
+"NFS is a popular protocol for file sharing across TCP/IP networks.\n"
+"This service provides NFS server functionality, which is configured via the\n"
+"/etc/exports file."
 msgstr ""
+"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
+"มันให้การทำงานของNFS server ที่ระบุในไฟล์ /etc/exports"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Msec"
+msgstr "Mouse"
+
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "The DHCP end range"
+msgid ""
+"=> Notice, a label changed:\n"
+"%s"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "The DHCP start range"
+msgid "Number of capture buffers:"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The internal domain name"
-msgstr "ไม่มีเครื่องพิมพ์"
-
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
-msgid "The DNS Server IP"
-msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
-
-#: ../../standalone/drakgw:1
+#: ../../interactive/stdio.pm:1
 #, fuzzy, c-format
-msgid "(This) DHCP Server IP"
-msgstr "ค่า IP ของ CUPS เซิร์ฟเวอร์"
+msgid "Your choice? (0/1, default `%s') "
+msgstr "ตัวเลือกของคุณ? (ค่าตั้งต้น %s)"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"DHCP Server Configuration.\n"
+"Any partitions that have been newly defined must be formatted for use\n"
+"(formatting means creating a file system).\n"
 "\n"
-"Here you can select different options for the DHCP server configuration.\n"
-"If you don't know the meaning of an option, simply leave it as it is.\n"
+"At this time, you may wish to reformat some already existing partitions to\n"
+"erase any data they contain. If you wish to do that, please select those\n"
+"partitions as well.\n"
+"\n"
+"Please note that it is not necessary to reformat all pre-existing\n"
+"partitions. You must reformat the partitions containing the operating\n"
+"system (such as \"/\", \"/usr\" or \"/var\") but you do not have to\n"
+"reformat partitions containing data that you wish to keep (typically\n"
+"\"/home\").\n"
+"\n"
+"Please be careful when selecting partitions. After formatting, all data on\n"
+"the selected partitions will be deleted and you will not be able to recover\n"
+"it.\n"
 "\n"
+"Click on \"%s\" when you are ready to format partitions.\n"
+"\n"
+"Click on \"%s\" if you want to choose another partition for your new\n"
+"Mandrake Linux operating system installation.\n"
+"\n"
+"Click on \"%s\" if you wish to select partitions that will be checked for\n"
+"bad blocks on the disk."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "French"
+msgstr "ฝรั่งเศษ"
+
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Czech (QWERTY)"
+msgstr "เชคโกสโลวาเกีย (QWERTY)"
+
+#: ../../standalone/service_harddrake:1
 #, fuzzy, c-format
-msgid "Local Network adress"
-msgstr "ไม่พบการ์ดเน็ตเวิร์ก"
+msgid "Hardware probing in progress"
+msgstr "ค้นหาเจอบน port %s"
 
 #: ../../standalone/drakgw:1
+#, fuzzy, c-format
+msgid "Net Device"
+msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+
+#: ../../install_steps_interactive.pm:1 ../../steps.pm:1
 #, c-format
-msgid ""
-"I can keep your current configuration and assume you already set up a DHCP "
-"server; in that case please verify I correctly read the Network that you use "
-"for your local network; I will not reconfigure it and I will not touch your "
-"DHCP server configuration.\n"
-"\n"
-"The default DNS entry is the Caching Nameserver configured on the firewall. "
-"You can replace that with your ISP DNS IP, for example.\n"
-"\t\t      \n"
-"Otherwise, I can reconfigure your interface and (re)configure a DHCP server "
-"for you.\n"
-"\n"
-msgstr ""
+msgid "Summary"
+msgstr "รวมความ"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Current configuration of `%s':\n"
-"\n"
-"Network: %s\n"
-"IP address: %s\n"
-"IP attribution: %s\n"
-"Driver: %s"
+" (Parallel Ports: /dev/lp0, /dev/lp1, ..., equivalent to LPT1:, LPT2:, ..., "
+"1st USB printer: /dev/usb/lp0, 2nd USB printer: /dev/usb/lp1, ...)."
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Current interface configuration"
-msgstr "การคอนฟิก Internet"
+msgid "Next"
+msgstr "Next ->"
 
-#: ../../standalone/drakgw:1
+#: ../../bootloader.pm:1
 #, fuzzy, c-format
-msgid "Show current interface configuration"
-msgstr "การคอนฟิก Internet"
+msgid "You can't install the bootloader on a %s partition\n"
+msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
 
-#: ../../standalone/drakgw:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "No (experts only)"
+msgid "CHAP"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "Automatic reconfiguration"
-msgstr "Boot Style Configuration"
+msgid "(bootp/dhcp/zeroconf)"
+msgstr "(bootp/dhcp)"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakautoinst:1
 #, c-format
 msgid ""
-"Warning, the network adapter (%s) is already configured.\n"
 "\n"
-"Do you want an automatic re-configuration?\n"
+"Welcome.\n"
 "\n"
-"You can do it manually but you need to know what you're doing."
+"The parameters of the auto-install are available in the sections on the left"
 msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Network interface already configured"
-msgstr "ไม่มีการคอนฟิกจอภาพ"
+msgid "Puerto Rico"
+msgstr "Protocol"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/draksplash:1
 #, c-format
 msgid ""
-"Please choose what network adapter will be connected to your Local Area "
-"Network."
-msgstr "กรุณาเลือก network adapter ที่จะใช้กับระบบ LAN"
+"package 'ImageMagick' is required to be able to complete configuration.\n"
+"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Lithuanian \"number row\" QWERTY"
+msgstr "ลิธัวเนีย \"แถวตัวเลข\" QWERTY"
+
+#: ../../install_any.pm:1
 #, c-format
 msgid ""
-"There is only one configured network adapter on your system:\n"
+"The following packages will be removed to allow upgrading your system: %s\n"
 "\n"
-"%s\n"
 "\n"
-"I am about to setup your Local Area Network with that adapter."
+"Do you really want to remove these packages?\n"
 msgstr ""
-"ในเครื่องของคุณมี network adapter อันเดียวที่ได้รับการปรับแต่งแล้ว\n"
-"\n"
-"%s\n"
-"\n"
-"ผมกำลังจะใช้ adapter นี้กับระบบ LAN"
-
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "Network interface"
-msgstr "Network interface"
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"No ethernet network adapter has been detected on your system. Please run the "
-"hardware configuration tool."
-msgstr "ไม่สามารถตรวจพบ network adapter บนเครื่องนี้ กรุณารันโปรแกรมปรับแต่ง hardware"
+msgid "Anguilla"
+msgstr ""
 
-#: ../../standalone/drakgw:1 ../../standalone/drakpxe:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "No network adapter on your system!"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+msgid "NIS Domain"
+msgstr "โดเมน NIS"
 
-#: ../../standalone/drakgw:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Interface %s"
-msgstr "Interface %s"
+msgid ""
+"\n"
+"- User Files:\n"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Interface %s (using module %s)"
-msgstr "Interface %s (using module %s)"
+msgid "Antarctica"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, fuzzy, c-format
-msgid "Net Device"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+msgid "Mount options"
+msgstr "อ๊อปชั่นของโมดูล:"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
+#, c-format
+msgid "Jamaica"
+msgstr ""
+
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Please enter the name of the interface connected to the internet.\n"
-"\n"
-"Examples:\n"
-"\t\tppp+ for modem or DSL connections, \n"
-"\t\teth0, or eth1 for cable connection, \n"
-"\t\tippp+ for a isdn connection.\n"
+"Assign raw devices to block devices (such as hard drive\n"
+"partitions), for the use of applications such as Oracle or DVD players"
 msgstr ""
 
-#: ../../standalone/drakgw:1
-#, fuzzy, c-format
+#: ../../security/help.pm:1
+#, c-format
 msgid ""
-"You are about to configure your computer to share its Internet connection.\n"
-"With that feature, other computers on your local network will be able to use "
-"this computer's Internet connection.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
+"Arguments: (arg, alert=1)\n"
 "\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+"Enable/Disable name resolution spoofing protection.  If\n"
+"\\fIalert\\fP is true, also reports to syslog."
 msgstr ""
-"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
-"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
-"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
-"\n"
-"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"
 
-#: ../../standalone/drakgw:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Internet Connection Sharing"
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing"
+msgid "Please wait, preparing installation..."
+msgstr "กำลังเตรียมการติดตั้ง"
 
-#: ../../standalone/drakgw:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now enabled."
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"
+msgid "Czech (QWERTZ)"
+msgstr "เชคโกสโลวาเกีย (QWERTZ)"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Enabling servers..."
-msgstr "เริ่มทำงาน server"
+msgid "Track network card id (useful for laptops)"
+msgstr ""
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "dismiss"
-msgstr "เลิก"
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The port number should be an integer!"
+msgstr "Port number ควรเป็นตัวเลข"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "reconfigure"
-msgstr "คอนฟิกใหม่"
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "You must choose an image file first!"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
 
-#: ../../standalone/drakgw:1
-#, c-format
-msgid "enable"
-msgstr "enable"
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Restore from Hard Disk."
+msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
 
-#: ../../standalone/drakgw:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The setup of Internet connection sharing has already been done.\n"
-"It's currently disabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
+msgid "Add to LVM"
+msgstr "เพิ่มให้ LVM"
 
-#: ../../standalone/drakgw:1
+#: ../../network/network.pm:1
 #, c-format
-msgid "Internet Connection Sharing currently disabled"
-msgstr "การติดต่อ internet แบบ share ถูกยกเลิกแล้ว"
+msgid "DNS server"
+msgstr "เซิร์ฟเวอร์ DNS"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Internet Connection Sharing is now disabled."
-msgstr "การเชื่อมต่อกับ Internet แบบ sharing ถูกยกเลิกแล้ว"
+msgid "Trinidad and Tobago"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Disabling servers..."
-msgstr "ยกเลิกการทำงานของ server"
+msgid "LPD and LPRng do not support IPP printers.\n"
+msgstr ""
 
-#: ../../standalone/drakgw:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "disable"
-msgstr "disable"
+msgid "simple"
+msgstr "ง่าย"
 
-#: ../../standalone/drakgw:1
+#: ../../help.pm:1 ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"The setup of Internet Connection Sharing has already been done.\n"
-"It's currently enabled.\n"
-"\n"
-"What would you like to do?"
-msgstr ""
+msgid "Clear all"
+msgstr "ล้างทั้งหมด"
 
-#: ../../standalone/drakgw:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "No test pages"
+msgstr "ใช้ ให้พิมพ์กระดาษทดสอบทั้งสองแบบ"
+
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Internet Connection Sharing currently enabled"
-msgstr "การเชื่อมต่อ internet แบบ share ได้ทำงานแล้ว"
+msgid "Adapter %s: %s"
+msgstr "Adapter %s: %s"
 
-#: ../../standalone/drakgw:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Sorry, we support only 2.4 kernels."
+msgid "Falkland Islands (Malvinas)"
 msgstr ""
 
-#: ../../standalone/drakhelp:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"No browser is installed on your system, Please install one if you want to "
-"browse the help system"
+msgid "Unknown model"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Path"
+msgid "if set to yes, check files/directories writable by everybody."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../help.pm:1
 #, fuzzy, c-format
-msgid "group :"
-msgstr "เวิร์กกรุ๊ป (workgroup)"
+msgid "authentication"
+msgstr "การตรวจสอบสิทธิ์การใช้งาน"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "user :"
-msgstr "ชื่อผู้ใช้"
+msgid "Backup Now"
+msgstr "เซ็ตอัพระบบไฟล์"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Path selection"
-msgstr "บันทึกกลุ่มแพ็คเก็จที่เลือก"
+#: ../../standalone/drakboot:1 ../../standalone/drakfloppy:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#, c-format
+msgid "/_File"
+msgstr "/_ไฟล์"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "when checked, owner and group won't be changed"
+msgid "Removing printer from Star Office/OpenOffice.org/GIMP"
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use group id for execution"
-msgstr "ใช้ auto detection"
-
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Use owner id for execution"
-msgstr "ใช้ auto detection"
-
-#: ../../standalone/drakperm:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Used for directory:\n"
-" only owner of directory or file in this directory can delete it"
+"Launch packet filtering for Linux kernel 2.2 series, to set\n"
+"up a firewall to protect your machine from network attacks."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Set-GID"
+msgid "Tamil (ISCII-layout)"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Set-UID"
+msgid "Mayotte"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "sticky-bit"
-msgstr ""
+msgid "Creating auto install floppy..."
+msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Property"
-msgstr "Port"
+msgid "Searching for scanners ..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../standalone/drakperm:1
+#: ../../steps.pm:1
 #, fuzzy, c-format
-msgid "Permissions"
-msgstr "เวอร์ชั่น: %s\n"
+msgid "Partitioning"
+msgstr "เครื่องพิมพ์"
 
-#: ../../standalone/drakperm:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Current user"
-msgstr "ยอมรับผู้ใช้"
+msgid "Russia"
+msgstr "รัสเซีย"
 
-#: ../../standalone/drakperm:1
+#: ../../network/netconnect.pm:1
 #, c-format
-msgid "browse"
-msgstr ""
+msgid "ethernet card(s) detected"
+msgstr "ethernet card(s) ที่พบ"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Syslog"
+msgstr "syslog"
+
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Edit current rule"
+msgid "Can't create catalog!"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../share/advertising/11-mnf.pl:1
 #, c-format
-msgid "edit"
+msgid ""
+"Complete your security setup with this very easy-to-use software which "
+"combines high performance components such as a firewall, a virtual private "
+"network (VPN) server and client, an intrusion detection system and a traffic "
+"manager."
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../fsedit.pm:1
 #, fuzzy, c-format
-msgid "Delete selected rule"
-msgstr "ลบคิว"
+msgid "Not enough free space for auto-allocating"
+msgstr "ไม่มีพื้นที่เพียงพอสำหรับการแบ่งสัดส่วนพาร์ติชั่นแบบออโต้"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "delete"
-msgstr "ลบ"
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Set root password"
+msgstr "เซ็ตรหัสผ่านรูท"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "Add a new rule at the end"
-msgstr "ไม่มีเครื่องพิมพ์"
+#: ../../harddrake/sound.pm:1
+#, c-format
+msgid ""
+"There's no free driver for your sound card (%s), but there's a proprietary "
+"driver at \"%s\"."
+msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "add a rule"
-msgstr "เพิ่ม 1 module"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "After resizing partition %s, all data on this partition will be lost"
+msgstr "หลังจากเปลี่ยนขนาดพาร์ติชั่น %s ข้อมูลทั้งหมดในพาร์ติชั่นนี้จะหายไป"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Move selected rule down one level"
+msgid "Internet connection configuration"
+msgstr "การปรับแต่งการติดต่อเข้า internet"
+
+#: ../../standalone/drakxtv:1
+#, c-format
+msgid "Scanning for TV channels"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbug:1
+#, c-format
+msgid "Kernel:"
+msgstr ""
+
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Down"
-msgstr "ทำเรียบร้อยแล้ว"
+msgid "/_About..."
+msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."
 
-#: ../../standalone/drakperm:1
+#: ../../keyboard.pm:1
+#, fuzzy, c-format
+msgid "Bengali"
+msgstr "enable"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "Move selected rule up one level"
-msgstr ""
+msgid "Preference: "
+msgstr "ข้อกำหนด: "
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Up"
-msgstr ""
+msgid "Wizard..."
+msgstr "Wizard..."
 
-#: ../../standalone/drakperm:1
+#: ../../install_steps_interactive.pm:1 ../../services.pm:1
 #, c-format
-msgid "select perm file to see/edit"
+msgid "Services: %d activated for %d registered"
 msgstr ""
 
-#: ../../standalone/drakperm:1
+#: ../../any.pm:1
 #, c-format
-msgid ""
-"Drakperm is used to see files to use in order to fix permissions, owners, "
-"and groups via msec.\n"
-"You can also edit your own rules which will owerwrite the default rules."
+msgid "Create a bootdisk"
+msgstr "สร้างแผ่นบูต"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Solomon Islands"
 msgstr ""
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "permissions"
-msgstr "พาร์ติชั่น %s"
+#: ../../modules/interactive.pm:1
+#, c-format
+msgid "(module %s)"
+msgstr "(โมดูล %s)"
 
-#: ../../standalone/drakperm:1
-#, fuzzy, c-format
-msgid "group"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Workgroup"
 msgstr "เวิร์กกรุ๊ป (workgroup)"
 
-#: ../../standalone/drakperm:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "user"
-msgstr "ชื่อผู้ใช้"
+msgid "Printer host name or IP"
+msgstr "ชื่อของเครื่องพิมพ์"
 
-#: ../../standalone/drakperm:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "path"
+msgid "Host Path or Module"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Name of printer should contain only letters, numbers and the underscore"
+msgstr ""
+
+#: ../../standalone/drakgw:1
 #, fuzzy, c-format
-msgid "Location of auto_install.cfg file"
-msgstr "กำลังเตรียมการติดตั้งลงบน floppy"
+msgid "Show current interface configuration"
+msgstr "การคอนฟิก Internet"
 
-#: ../../standalone/drakpxe:1
+#: ../../help.pm:1
 #, c-format
-msgid ""
-"Please indicate where the auto_install.cfg file is located.\n"
-"\n"
-"Leave it blank if you do not want to set up automatic installation mode.\n"
-"\n"
-msgstr ""
+msgid "Development"
+msgstr "พัฒนาซอฟท์แวร์ (Development)"
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1 ../../help.pm:1 ../../diskdrake/dav.pm:1
+#: ../../diskdrake/hd_gtk.pm:1 ../../diskdrake/removable.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1 ../../interactive/http.pm:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid ""
-"No CD or DVD image found, please copy the installation program and rpm files."
-msgstr ""
+msgid "Done"
+msgstr "ทำเรียบร้อยแล้ว"
 
-#: ../../standalone/drakpxe:1
+#: ../../network/drakfirewall.pm:1
 #, fuzzy, c-format
-msgid "No image found"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Web Server"
+msgstr "เซิร์ฟเวอร์"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "\tDo not include System Files\n"
+msgstr ""
+
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Installation image directory"
-msgstr "การปรับแต่ง LAN"
+msgid "Chile"
+msgstr "เลือก file"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Please indicate where the installation image will be available.\n"
-"\n"
-"If you do not have an existing directory, please copy the CD or DVD "
-"contents.\n"
-"\n"
+"The inkjet printer drivers provided by Lexmark only support local printers, "
+"no printers on remote machines or print server boxes. Please connect your "
+"printer to a local port or configure it on the machine where it is connected "
+"to."
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "The DHCP end ip"
+msgid ""
+"Your multi-function device was configured automatically to be able to scan. "
+"Now you can scan with \"scanimage\" (\"scanimage -d hp:%s\" to specify the "
+"scanner when you have more than one) from the command line or with the "
+"graphical interfaces \"xscanimage\" or \"xsane\". If you are using the GIMP, "
+"you can also scan by choosing the appropriate point in the \"File\"/\"Acquire"
+"\" menu. Call also \"man scanimage\" on the command line to get more "
+"information.\n"
+"\n"
+"Do not use \"scannerdrake\" for this device!"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
+#: ../../any.pm:1
 #, c-format
-msgid "The DHCP start ip"
-msgstr ""
+msgid "(already added %s)"
+msgstr "(เพิ่ม %s เรียบร้อยแล้ว)"
 
-#: ../../standalone/drakpxe:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"The DHCP server will allow other computer to boot using PXE in the given "
-"range of address.\n"
-"\n"
-"The network address is %s using a netmask of %s.\n"
-"\n"
+msgid ", using command %s"
 msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Interface %s (on network %s)"
-msgstr "Interface %s (using module %s)"
-
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "Please choose which network interface will be used for the dhcp server."
-msgstr "กรุณาเลือก Network Adaptor สำหรับการต่อเข้า Internet"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Alt and Shift keys simultaneously"
+msgstr ""
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid ""
-"You are about to configure your computer to install a PXE server as a DHCP "
-"server\n"
-"and a TFTP server to build an installation server.\n"
-"With that feature, other computers on your local network will be installable "
-"using this computer as source.\n"
-"\n"
-"Make sure you have configured your Network/Internet access using drakconnect "
-"before going any further.\n"
-"\n"
-"Note: you need a dedicated Network Adapter to set up a Local Area Network "
-"(LAN)."
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "Flags"
 msgstr ""
-"ขณะนี้การต่อเข้า internet ได้ทำการปรับแต่งเรียบร้อยแล้ว\n"
-"คุณสามารถทำให้ผู้ใช้อื่นๆไช้ internet ร่วมกับคุณได้\n"
-"(แต่คุณจำเป็นต้องมี Network Adapter เพื่อการต่อระบบ LAN )\n"
-"\n"
-"คุณต้องการให้ผู้อื่นใช้ internet ร่วมด้วยหรือไม่\n"
 
-#: ../../standalone/drakpxe:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Installation Server Configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "Add/Del Users"
+msgstr "เพิ่มผู้ใช้"
 
-#: ../../standalone/drakpxe:1
-#, fuzzy, c-format
-msgid "PXE Server Configuration"
-msgstr "การปรับแต่ง LAN"
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "Host/network IP address missing."
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security options..."
-msgstr "กำลังเตรียมการติดตั้ง"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "weekly"
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Please wait, setting security level..."
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Settings"
+msgstr "ค่าติดตั้ง"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Periodic Checks"
+msgid "The entered host/network IP is not correct.\n"
 msgstr ""
 
-#: ../../standalone/draksec:1
+#: ../../any.pm:1
 #, fuzzy, c-format
-msgid "System Options"
-msgstr "อ๊อปชั่นของโมดูล:"
+msgid "Here is the full list of available countries"
+msgstr "ต่อไปนี้คือ keyboard ที่ใช้ได้"
 
-#: ../../standalone/draksec:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Network Options"
-msgstr "อ๊อปชั่นของโมดูล:"
+msgid "Alternative test page (A4)"
+msgstr "กำลังพิมพ์กระดาษทดสอบ"
 
-#: ../../standalone/draksec:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"The following options can be set to customize your\n"
-"system security. If you need an explanation, look at the help tooltip.\n"
+"If you have all the CDs in the list below, click Ok.\n"
+"If you have none of those CDs, click Cancel.\n"
+"If only some CDs are missing, unselect them, then click Ok."
 msgstr ""
+"ถ้าคุณมี CD ทุกอย่าง กด OK\n"
+"ถ้าไม่มีเลย กด ยกเลิก (cancel)\n"
+"ถ้ามีแค่บางแผ่น เลือกเท่าที่มีแล้วกด OK"
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Administrator:"
-msgstr "อ๊อปชั่นของเครื่องพิมพ์แบบรีโมท"
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
+#, c-format
+msgid "Wait please"
+msgstr ""
 
-#: ../../standalone/draksec:1
-#, fuzzy, c-format
-msgid "Security Alerts:"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "PAP"
+msgstr "PAP"
 
-#: ../../standalone/draksec:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Security Level:"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+msgid "Backup user files"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
 
-#: ../../standalone/draksec:1
+#: ../../diskdrake/dav.pm:1
 #, fuzzy, c-format
-msgid "(default value: %s)"
-msgstr " (Default)"
+msgid "New"
+msgstr "ใหม่"
 
-#: ../../standalone/draksec:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Standard: This is the standard security recommended for a computer that will "
-"be used to connect\n"
-"               to the Internet as a client.\n"
-"\n"
-"High:       There are already some restrictions, and more automatic checks "
-"are run every night.\n"
+"This is the most crucial decision point for the security of your GNU/Linux\n"
+"system: you have to enter the \"root\" password. \"Root\" is the system\n"
+"administrator and is the only user authorized to make updates, add users,\n"
+"change the overall system configuration, and so on. In short, \"root\" can\n"
+"do everything! That is why you must choose a password that is difficult to\n"
+"guess - DrakX will tell you if the password that you chose too easy. As you\n"
+"can see, you are not forced to enter a password, but we strongly advise you\n"
+"against this. GNU/Linux is just as prone to operator error as any other\n"
+"operating system. Since \"root\" can overcome all limitations and\n"
+"unintentionally erase all data on partitions by carelessly accessing the\n"
+"partitions themselves, it is important that it be difficult to become\n"
+"\"root\".\n"
 "\n"
-"Higher:    The security is now high enough to use the system as a server "
-"which can accept\n"
-"              connections from many clients. If your machine is only a "
-"client on the Internet, you\n"
-"           should choose a lower level.\n"
+"The password should be a mixture of alphanumeric characters and at least 8\n"
+"characters long. Never write down the \"root\" password -- it makes it far\n"
+"too easy to compromise a system.\n"
 "\n"
-"Paranoid:  This is similar to the previous level, but the system is entirely "
-"closed and security\n"
-"                features are at their maximum\n"
+"One caveat -- do not make the password too long or complicated because you\n"
+"must be able to remember it!\n"
 "\n"
-"Security Administrator:\n"
-"               If the 'Security Alerts' option is set, security alerts will "
-"be sent to this user (username or\n"
-"            email)"
-msgstr ""
-
-#: ../../standalone/draksound:1
-#, c-format
-msgid ""
+"The password will not be displayed on screen as you type it in. To reduce\n"
+"the chance of a blind typing error you will need to enter the password\n"
+"twice. If you do happen to make the same typing error twice, this\n"
+"``incorrect'' password will be the one you will have use the first time you\n"
+"connect.\n"
 "\n"
+"If you wish access to this computer to be controlled by an authentication\n"
+"server, click the \"%s\" button.\n"
 "\n"
+"If your network uses either LDAP, NIS, or PDC Windows Domain authentication\n"
+"services, select the appropriate one for \"%s\". If you do not know which\n"
+"one to use, you should ask your network administrator.\n"
 "\n"
-"Note: if you've an ISA PnP sound card, you'll have to use the sndconfig "
-"program.  Just type \"sndconfig\" in a console."
+"If you happen to have problems with remembering passwords, if your computer\n"
+"will never be connected to the internet or that you absolutely trust\n"
+"everybody who uses your computer, you can choose to have \"%s\"."
 msgstr ""
 
-#: ../../standalone/draksound:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"No Sound Card has been detected on your machine. Please verify that a Linux-"
-"supported Sound Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
+"At this point, DrakX will allow you to choose the security level desired\n"
+"for the machine. As a rule of thumb, the security level should be set\n"
+"higher if the machine will contain crucial data, or if it will be a machine\n"
+"directly exposed to the Internet. The trade-off of a higher security level\n"
+"is generally obtained at the expense of ease of use.\n"
 "\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
+"If you do not know what to choose, stay with the default option."
 msgstr ""
 
-#: ../../standalone/draksound:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "No Sound Card detected!"
-msgstr "ไม่เชื่อมต่อ"
+msgid "Load from floppy"
+msgstr "เรียกคืนจากแผ่นฟล้อปปี้"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "The following printer was auto-detected. "
+msgstr "แพ็คเก็จเหล่านี้กำลังจะถูกลบ"
+
+#: ../../standalone/drakTermServ:1
 #, c-format
-msgid "%s BootSplash (%s) preview"
+msgid "Boot Floppy"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Generating preview ..."
-msgstr "กำลังตรวจสอบอุปกรณ์..."
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "You must choose an image file first!"
-msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Norwegian"
+msgstr "นอร์เวย์"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "ProgressBar color selection"
-msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+msgid "Searching for new scanners ..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "This theme does not yet have a bootsplash in %s !"
+msgid "Apache World Wide Web Server"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "saving Bootsplash theme..."
+msgid "stepping of the cpu (sub model (generation) number)"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "choose image file"
-msgstr "เลือกกิจกรรม"
-
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "choose image"
-msgstr "เลือกกิจกรรม"
+msgid "select path to restore (instead of /)"
+msgstr "คุณมีเม้าส์ชนิดใด"
 
 #: ../../standalone/draksplash:1
 #, fuzzy, c-format
 msgid "Configure bootsplash picture"
 msgstr "ปรับแต่งการบริการต่างๆ"
 
-#: ../../standalone/draksplash:1
-#, c-format
-msgid "Make kernel message quiet by default"
-msgstr ""
-
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Display logo on Console"
-msgstr ""
+msgid "China"
+msgstr "จีน"
 
-#: ../../standalone/draksplash:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Choose color"
-msgstr "เลือกจอภาพ"
+msgid " (Make sure that all your printers are connected and turned on).\n"
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
 
-#: ../../standalone/draksplash:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Save theme"
-msgstr "ติดตั้งระบบ"
+msgid "Georgia"
+msgstr "นอร์เวย์"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Preview"
-msgstr "อุปกรณ์"
+msgid "Reading data of installed printers..."
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "the color of the progress bar"
+msgid " Erase Now "
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "the height of the progress bar"
-msgstr ""
+msgid "server"
+msgstr "เซิร์ฟเวอร์"
 
-#: ../../standalone/draksplash:1
+#: ../../install_any.pm:1
 #, c-format
-msgid "the width of the progress bar"
-msgstr ""
+msgid "Insert a FAT formatted floppy in drive %s"
+msgstr "ให้ใส่แผ่นฟล้อปปี้ที่ format แบบ FAT ลงในไดรว์ %s"
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid ""
-"the progress bar y coordinate\n"
-"of its upper left corner"
+msgid "yes means the processor has an arithmetic coprocessor"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/sound.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid ""
-"the progress bar x coordinate\n"
-"of its upper left corner"
-msgstr ""
+msgid "Please Wait... Applying the configuration"
+msgstr "กรุณารอสักครู่ ..."
 
-#: ../../standalone/draksplash:1
+# NOTE: this message will be displayed by grub at boot time; that is
+# using the BIOS font; that means cp437 charset on 99.99% of PC computers
+# out there. It is the nsuggested that for non latin languages an ascii
+# transliteration be used; or maybe the english text be used; as it is best
+#
+# The lines must fit on screen, aka length < 80
+# and only one line per string for the GRUB messages
+#
+#. -PO: these messages will be displayed at boot time in the BIOS, use only ASCII (7bit)
+#. -PO: and keep them smaller than 79 chars long
+#: ../../bootloader.pm:1
 #, c-format
-msgid "text box height"
-msgstr ""
+msgid "Welcome to GRUB the operating system chooser!"
+msgstr "ยินดีต้อนรับสู่ GRUB the operating system chooser!"
 
-#: ../../standalone/draksplash:1
+#: ../../bootloader.pm:1
 #, c-format
-msgid "text width"
-msgstr ""
+msgid "Grub"
+msgstr "Grub"
 
-#: ../../standalone/draksplash:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid ""
-"y coordinate of text box\n"
-"in number of characters"
+msgid "SCSI controllers"
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../printer/main.pm:1
 #, c-format
-msgid ""
-"x coordinate of text box\n"
-"in number of characters"
+msgid " on LPD server \"%s\", printer \"%s\""
 msgstr ""
 
-#: ../../standalone/draksplash:1
+#: ../../standalone/drakedm:1
 #, c-format
-msgid "Browse"
+msgid "Choosing a display manager"
 msgstr ""
 
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "Theme name"
-msgstr "ชื่อที่ใช้ในกรุ๊ป (sharename)"
-
-#: ../../standalone/draksplash:1
-#, fuzzy, c-format
-msgid "final resolution"
-msgstr "ขนาดจอภาพ"
-
-#: ../../standalone/draksplash:1
+#: ../../network/ethernet.pm:1 ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "first step creation"
-msgstr "สร้าง boot disk"
-
-#: ../../standalone/draksplash:1
-#, c-format
-msgid ""
-"package 'ImageMagick' is required to be able to complete configuration.\n"
-"Click \"Ok\" to install 'ImageMagick' or \"Cancel\" to quit"
-msgstr ""
+msgid "Zeroconf Host name"
+msgstr "ชื่อโฮสต์:"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/network.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"No TV Card has been detected on your machine. Please verify that a Linux-"
-"supported Video/TV Card is correctly plugged in.\n"
-"\n"
-"\n"
-"You can visit our hardware database at:\n"
-"\n"
-"\n"
-"http://www.linux-mandrake.com/en/hardware.php3"
-msgstr ""
+msgid "IP address should be in format 1.2.3.4"
+msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "No TV Card detected!"
+msgid "Ecuador"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "Now, you can run xawtv (under X Window!) !\n"
-msgstr ""
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Add an item"
+msgstr "เพิ่มผู้ใช้"
 
-#: ../../standalone/drakxtv:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Have a nice day!"
+msgid "The printers on this machine are available to other computers"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakautoinst:1
 #, c-format
-msgid "XawTV isn't installed!"
+msgid "I can't find needed image file `%s'."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "There was an error while scanning for TV channels"
-msgstr "มีปัญหาการติดตั้งของแพ็คเก็จ:"
-
-#: ../../standalone/drakxtv:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Scanning for TV channels"
+msgid "No sound card detected. Try \"harddrake\" after installation"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "Scanning for TV channels in progress ..."
+msgid ""
+"Invalid port given: %s.\n"
+"The proper format is \"port/tcp\" or \"port/udp\", \n"
+"where port is between 1 and 65535."
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../any.pm:1
 #, c-format
-msgid "Area:"
-msgstr ""
+msgid "Shell"
+msgstr "เชลล์ที่ใช้"
 
-#: ../../standalone/drakxtv:1
+#: ../../network/isdn.pm:1
 #, c-format
-msgid "TV norm:"
-msgstr ""
+msgid "PCI"
+msgstr "PCI"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Please,\n"
-"type in your tv norm and country"
+msgid "Sao Tome and Principe"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
 #, c-format
-msgid "Australian Optus cable TV"
+msgid "Can't login using username %s (bad password?)"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Newzealand"
-msgstr ""
-
-#: ../../standalone/drakxtv:1
-#, fuzzy, c-format
-msgid "France [SECAM]"
-msgstr "ฝรั่งเศษ"
+msgid "Azerbaidjani (latin)"
+msgstr "Azerbaidjani (latin)"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "East Europe"
-msgstr "ยุโรป"
+msgid "Package not installed"
+msgstr "ออกจากการติดตั้ง"
 
-#: ../../standalone/drakxtv:1
+#: ../../share/advertising/12-mdkexpert.pl:1
 #, fuzzy, c-format
-msgid "West Europe"
-msgstr "ยุโรป"
-
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "China (broadcast)"
-msgstr ""
+msgid "Become a MandrakeExpert"
+msgstr "แบบผู้เชี่ยวชาญ (Expert)"
 
-#: ../../standalone/drakxtv:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Japan (cable)"
+msgid "American Samoa"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Japan (broadcast)"
-msgstr ""
+msgid "Protocol"
+msgstr "Protocol"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Canada (cable)"
-msgstr "คานาดา (ควิเบค)"
+msgid "Copy fonts on your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "USA (cable-hrc)"
+msgid "Harddrake help"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/harddrake2:1
 #, c-format
-msgid "USA (cable)"
+msgid "Bogomips"
 msgstr ""
 
-#: ../../standalone/drakxtv:1
-#, c-format
-msgid "USA (broadcast)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Mandrake Terminal Server Configuration"
+msgstr "การคอนฟิก Internet"
 
-#: ../../standalone/drakxtv:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"XawTV isn't installed!\n"
 "\n"
-"\n"
-"If you do have a TV card but DrakX has neither detected it (no bttv nor "
-"saa7134\n"
-"module in \"/etc/modules\") nor installed xawtv, please send the\n"
-"results of \"lspcidrake -v -f\" to \"install\\@mandrakesoft.com\"\n"
-"with subject \"undetected TV card\".\n"
+"                    DrakBackup Report Details\n"
 "\n"
 "\n"
-"You can install it by typing \"urpmi xawtv\" as root, in a console."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "primary"
+msgid "Restore all backups"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "secondary"
-msgstr "%d วินาที"
-
-#: ../../standalone/harddrake2:1
+#: ../../security/help.pm:1
 #, c-format
-msgid ""
-"Click on a device in the left tree in order to display its information here."
+msgid "if set to yes, check open ports."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Unknown"
-msgstr "Generic"
-
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "unknown"
+msgid "This may take a moment to erase the media."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Running \"%s\" ..."
-msgstr "อ่าน CUPS drivers database..."
+#: ../../install_steps_gtk.pm:1
+#, c-format
+msgid "You can't select/unselect this package"
+msgstr "คุณไม่สามารถเลือก/ไม่เลือกแพกเกจนี้"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1 ../../harddrake/sound.pm:1
+#: ../../network/modem.pm:1 ../../standalone/drakfloppy:1
 #, c-format
-msgid "Run config tool"
-msgstr ""
+msgid "Warning"
+msgstr "คำเตือน"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Configure module"
-msgstr "คอนฟิกเม้าส์"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid ""
+"\n"
+"- Other Files:\n"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Information"
-msgstr "แสดงข้อมูล"
+msgid "Remote host name"
+msgstr "ชื่อโฮสต์รีโมท"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1
 #, fuzzy, c-format
-msgid "Detected hardware"
-msgstr "อ่านต่อข้อมูลของฮาร์ดแวร์"
+msgid "deactivate now"
+msgstr "แอ็คทีฟ"
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Harddrake2 version "
-msgstr "การตรวจหาฮาร์ดไดรว์"
+#: ../../any.pm:1
+#, c-format
+msgid "access to X programs"
+msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_interactive.pm:1
 #, fuzzy, c-format
-msgid "Detection in progress"
-msgstr "ค้นหาเจอบน port %s"
+msgid "Computing the size of the Windows partition"
+msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
 
-#: ../../standalone/harddrake2:1
+#: ../../crypto.pm:1 ../../lang.pm:1 ../../network/tools.pm:1
+#: ../../standalone/drakxtv:1
 #, fuzzy, c-format
-msgid "Author:"
-msgstr "ตรวจหาอัตโนมัติ"
+msgid "Italy"
+msgstr "อิตาลี"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"This is HardDrake, a Mandrake hardware configuration tool.\n"
-"Version:"
-msgstr ""
+msgid "Name of printer"
+msgstr "ชื่อเครื่องพิมพ์"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "About Harddrake"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_About..."
-msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."
+msgid "disable"
+msgstr "disable"
 
-#: ../../standalone/harddrake2:1
+#: ../../fs.pm:1 ../../partition_table.pm:1
 #, c-format
-msgid "/_Report Bug"
-msgstr "/_แจ้ง Bug"
+msgid "error unmounting %s: %s"
+msgstr "ผิดพลาดยกเลิกการเม้าท์ %s: %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Once you've selected a device, you'll be able to see the device information "
-"in fields displayed on the right frame (\"Information\")"
+msgid "Do it!"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Select a device !"
-msgstr "เลือกกราฟฟิคการ์ด"
-
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"Description of the fields:\n"
-"\n"
+msgid "Cayman Islands"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Harddrake help"
+msgid "%s not responding"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "/_Fields description"
-msgstr "รายละเอียด"
+msgid "Select model manually"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "/_Help"
-msgstr "/_ช่วยเหลือ"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/_Quit"
-msgstr "ออก"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _jazz drives"
-msgstr "ใช้ auto detection"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _modems"
-msgstr "ใช้ auto detection"
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "/Autodetect _printers"
-msgstr "ใช้ auto detection"
+msgid "Format"
+msgstr "ฟอร์แมต"
 
-#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
+#: ../../network/adsl.pm:1
 #, c-format
-msgid "/_Options"
-msgstr "/_Options"
+msgid ""
+"The most common way to connect with adsl is pppoe.\n"
+"Some connections use pptp, a few use dhcp.\n"
+"If you don't know, choose 'use pppoe'"
+msgstr ""
+"การติดต่อโดยทั่วไปของ adsl คือ pppoe.\n"
+"บางครั้งอาจใช้  pptp มีน้อยคนที่ใช้  dhcp.\n"
+"ถ้าคุณไม่ทราบ เลือก 'use pppoe'"
 
-#: ../../standalone/harddrake2:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "the vendor name of the processor"
+msgid "Various"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "the vendor name of the device"
+msgid "Zip"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "The type of bus on which the mouse is connected"
-msgstr "เม้าส์ของคุณต่อเข้ากับพอร์ตอนุกรมใด"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Stepping of the cpu (sub model (generation) number)"
+msgid ""
+"\n"
+"\n"
+"Printerdrake could not determine which model your printer %s is. Please "
+"choose the correct model from the list."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model stepping"
-msgstr "ฟอร์แมต"
-
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "the number of the processor"
+msgid ""
+"\n"
+"Mark the printers which you want to transfer and click \n"
+"\"Transfer\"."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/data.pm:1
 #, c-format
-msgid "Processor ID"
+msgid "PDQ"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "network printer port"
-msgstr "เครื่องพิมพ์ในระบบ Network (TCP/Socket)"
+msgid "Albanian"
+msgstr "Iranian"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "the name of the CPU"
+msgid "Lithuania"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Name"
-msgstr "ชื่อ: "
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "the number of buttons the mouse has"
-msgstr "2 buttons"
+#: ../../any.pm:1
+#, c-format
+msgid "Compact"
+msgstr "แบบอัด (Compact)"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Number of buttons"
-msgstr "2 buttons"
+msgid "Detected model: %s %s"
+msgstr "ค้นพบ %s"
 
-#: ../../standalone/harddrake2:1
+#: ../../share/advertising/03-software.pl:1
 #, c-format
-msgid "Official vendor name of the cpu"
+msgid "MandrakeSoft has selected the best software for you"
 msgstr ""
 
 #: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model name"
-msgstr "ชี่อ module"
-
-#: ../../standalone/harddrake2:1
 #, c-format
-msgid "Generation of the cpu (eg: 8 for PentiumIII, ...)"
+msgid ""
+"This is HardDrake, a Mandrake hardware configuration tool.\n"
+"Version: %s\n"
+"Author: Thierry Vignaud <tvignaud\\@mandrakesoft.com>\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Model"
-msgstr "Mouse"
-
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "hard disk model"
-msgstr "Card mem (DMA)"
+msgid "Local files"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "class of hardware device"
-msgstr ""
+msgid "maybe"
+msgstr "อาจจะ"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Media class"
+msgid "Panama"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "Sub generation of the cpu"
+msgid ""
+"Your graphic card seems to have a TV-OUT connector.\n"
+"It can be configured to work using frame-buffer.\n"
+"\n"
+"For this you have to plug your graphic card to your TV before booting your "
+"computer.\n"
+"Then choose the \"TVout\" entry in the bootloader\n"
+"\n"
+"Do you have this feature?"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Level"
-msgstr "ระดับ"
-
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/main.pm:1 ../../Xconfig/monitor.pm:1
 #, c-format
-msgid "Format of floppies supported by the drive"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, fuzzy, c-format
-msgid "Floppy format"
-msgstr "ฟอร์แมต"
+msgid "Monitor"
+msgstr "จอภาพ"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"Some of the early i486DX-100 chips cannot reliably return to operating mode "
-"after the \"halt\" instruction is used"
+"You are about to set up printing to a Windows account with password. Due to "
+"a fault in the architecture of the Samba client software the password is put "
+"in clear text into the command line of the Samba client used to transmit the "
+"print job to the Windows server. So it is possible for every user on this "
+"machine to display the password on the screen by issuing commands as \"ps "
+"auxwww\".\n"
+"\n"
+"We recommend to make use of one of the following alternatives (in all cases "
+"you have to make sure that only machines from your local network have access "
+"to your Windows server, for example by means of a firewall):\n"
+"\n"
+"Use a password-less account on your Windows server, as the \"GUEST\" account "
+"or a special account dedicated for printing. Do not remove the password "
+"protection from a personal account or the administrator account.\n"
+"\n"
+"Set up your Windows server to make the printer available under the LPD "
+"protocol. Then set up printing from this machine with the \"%s\" connection "
+"type in Printerdrake.\n"
+"\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid "Halt bug"
-msgstr ""
+msgid "65 thousand colors (16 bits)"
+msgstr "หกหมื่นห้าพันสี (16 บิต)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Early pentiums were buggy and freezed when decoding the F00F bytecode"
+msgid ""
+"\n"
+"- Save on Hard drive on path: %s\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "F00f bug"
-msgstr ""
+msgid "Size: %d KB\n"
+msgstr "ขนาด: %d KB\n"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "yes means the arithmetic coprocessor has an exception vector attached"
-msgstr ""
+#: ../../standalone/drakfont:1
+#, fuzzy, c-format
+msgid "Remove fonts on your system"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Whether the FPU has an irq vector"
+msgid ""
+"Warning, the network adapter (%s) is already configured.\n"
+"\n"
+"Do you want an automatic re-configuration?\n"
+"\n"
+"You can do it manually but you need to know what you're doing."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "yes means the processor has an arithmetic coprocessor"
-msgstr ""
+msgid "Graphical interface at startup"
+msgstr "ให้เป็นกราฟฟิคเมื่อเริ่มต้น"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please enter the directory to save:"
+msgstr "กรุณาทดสอบเม้าส์"
 
 #: ../../standalone/harddrake2:1
 #, c-format
-msgid "Is FPU present"
+msgid "format of floppies supported by the drive"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../raid.pm:1
 #, c-format
+msgid "Not enough partitions for RAID level %d\n"
+msgstr "ไม่มีพาร์ติชั่นพอสำหรับ RAID ระดับ %d\n"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
 msgid ""
-"Early Intel Pentium chips manufactured have a bug in their floating point "
-"processor which did not achieve the required precision when performing a "
-"Floating point DIVision (FDIV)"
+"The following printers are configured. Double-click on a printer to change "
+"its settings; to make it the default printer; or to view information about "
+"it."
 msgstr ""
+"ต่อไปนี้เป็นข้อมูลรอการพิมพ์\n"
+"คุณสามารถเพิ่มข้อมูลหรือแก้ไขข้อมูลที่มีได้"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakconnect:1 ../../standalone/net_monitor:1
 #, c-format
-msgid "Fdiv bug"
-msgstr ""
+msgid "Connected"
+msgstr "เชื่อมต่ออยู่"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "USB printer \\#%s"
+msgstr "ไม่มีเครื่องพิมพ์"
+
+#: ../../keyboard.pm:1
 #, c-format
-msgid "CPU flags reported by the kernel"
-msgstr ""
+msgid "Macedonian"
+msgstr "Macedonian"
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, c-format
-msgid "Flags"
+msgid "Bridges and system controllers"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "the module of the GNU/Linux kernel that handles the device"
+msgid "/File/_Save"
+msgstr "/ไฟล์/_บันทึก"
+
+#: ../../lang.pm:1
+#, c-format
+msgid "Mali"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_gtk.pm:1
 #, fuzzy, c-format
-msgid "Module"
-msgstr "Mouse"
+msgid "No details"
+msgstr "รายละเอียด"
 
-#: ../../standalone/harddrake2:1
+#: ../../pkgs.pm:1
 #, c-format
-msgid "new dynamic device name generated by core kernel devfs"
-msgstr ""
+msgid "very nice"
+msgstr "ดีมาก"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/draksplash:1
 #, fuzzy, c-format
-msgid "New devfs device"
-msgstr "อุปกรณ์เกตเวย์"
+msgid "Preview"
+msgstr "อุปกรณ์"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "old static device name used in dev package"
-msgstr ""
+#: ../../standalone/drakbug:1
+#, fuzzy, c-format
+msgid "Remote Control"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Old device file"
-msgstr "เลือกไฟล์"
+msgid "Please select media for backup..."
+msgstr "กรุณาเลือกภาษาที่ต้องการใช้"
 
-#: ../../standalone/harddrake2:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "This field describes the device"
-msgstr ""
+msgid "XFree86 server: %s\n"
+msgstr "เซิร์ฟเวอร์ XFree86: %s\n"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid ""
-"The CPU frequency in MHz (Megahertz which in first approximation may be "
-"coarsely assimilated to number of instructions the cpu is able to execute "
-"per second)"
-msgstr ""
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Allow Thin Clients"
+msgstr "DHCP Client"
 
-#: ../../standalone/harddrake2:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Frequency (MHz)"
-msgstr ""
+msgid "Georgian (\"Russian\" layout)"
+msgstr "จอร์เจีย (เลย์เอ้าท์แบบรัสเซีย)"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/harddrake2:1 ../../standalone/logdrake:1
 #, c-format
-msgid "Information level that can be obtained through the cpuid instruction"
-msgstr ""
+msgid "/_Options"
+msgstr "/_Options"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Cpuid level"
-msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+msgid "Your printer model"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../standalone/harddrake2:1
+#: ../../any.pm:1
 #, c-format
-msgid "Family of the cpu (eg: 6 for i686 class)"
+msgid ""
+"\n"
+"\n"
+"(WARNING! You're using XFS for your root partition,\n"
+"creating a bootdisk on a 1.44 Mb floppy will probably fail,\n"
+"because XFS needs a very large driver)."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Cpuid family"
+msgid ""
+"\n"
+"- Delete hard drive tar files after backup.\n"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakpxe:1
 #, c-format
-msgid "Whether this cpu has the Cyrix 6x86 Coma bug"
+msgid ""
+"No CD or DVD image found, please copy the installation program and rpm files."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Coma bug"
-msgstr ""
+#: ../../share/advertising/04-configuration.pl:1
+#, fuzzy, c-format
+msgid "Mandrake's multipurpose configuration tool"
+msgstr "การคอนฟิก Internet"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "special capacities of the driver (burning ability and or DVD support)"
-msgstr ""
+#: ../../standalone/drakbackup:1 ../../standalone/drakperm:1
+#: ../../standalone/logdrake:1
+#, fuzzy, c-format
+msgid "Save"
+msgstr "สถานะ:"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "Drive capacity"
+msgid "The %s is unsupported"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../services.pm:1
 #, c-format
-msgid "Size of the (second level) cpu cache"
+msgid "Load the drivers for your usb devices."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../harddrake/data.pm:1
 #, fuzzy, c-format
-msgid "Cache size"
-msgstr "ขนาดของ chunk"
+msgid "Disk"
+msgstr "เดนมาร์ก"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Enter a printer device URI"
+msgstr "อุปกรณ์เครื่องพิมพ์ URI"
+
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
 msgid ""
-"- pci devices: this gives the PCI slot, device and function of this card\n"
-"- eide devices: the device is either a slave or a master device\n"
-"- scsi devices: the scsi bus and the scsi device ids"
+"The success of MandrakeSoft is based upon the principle of Free Software. "
+"Your new operating system is the result of collaborative work of the "
+"worldwide Linux Community."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Location on the bus"
-msgstr ""
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Israel"
+msgstr "อิสราเอล"
 
-#: ../../standalone/harddrake2:1
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "French Guiana"
+msgstr "ฝรั่งเศษ"
+
+#: ../../lang.pm:1
 #, c-format
-msgid ""
-"- PCI and USB devices: this lists the vendor, device, subvendor and "
-"subdevice PCI/USB ids"
-msgstr ""
+msgid "default:LTR"
+msgstr "default:LTR"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Bus identification"
-msgstr "การตรวจสอบสิทธิ์การใช้งาน"
+msgid "add a rule"
+msgstr "เพิ่ม 1 module"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"The GNU/Linux kernel needs to run a calculation loop at boot time to "
-"initialize a timer counter.  Its result is stored as bogomips as a way to "
-"\"benchmark\" the cpu."
+msgid "A command line must be entered!"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Bogomips"
+msgid "Select user manually"
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "EIDE/SCSI channel"
-msgstr ""
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Transfer printer configuration"
+msgstr "การคอนฟิก Internet"
 
-#: ../../standalone/harddrake2:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Channel"
-msgstr "ยกเลิก"
+msgid "Do you want to enable printing on the printers mentioned above?\n"
+msgstr "คุณต้องการต่อตอน boot หรือไม่"
 
-#: ../../standalone/harddrake2:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
 msgid ""
-"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
-msgstr ""
-
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "Bus"
+"For this to work for a W2K PDC, you will probably need to have the admin "
+"run: C:\\>net localgroup \"Pre-Windows 2000 Compatible Access\" everyone /"
+"add and reboot the server.\n"
+"You will also need the username/password of a Domain Admin to join the "
+"machine to the Windows(TM) domain.\n"
+"If networking is not yet enabled, Drakx will attempt to join the domain "
+"after the network setup step.\n"
+"Should this setup fail for some reason and domain authentication is not "
+"working, run 'smbpasswd -j DOMAIN -U USER%%PASSWORD' using your Windows(tm) "
+"Domain, and Admin Username/Password, after system boot.\n"
+"The command 'wbinfo -t' will test whether your authentication secrets are "
+"good."
 msgstr ""
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "the list of alternative drivers for this sound card"
-msgstr ""
+#: ../../printer/main.pm:1
+#, fuzzy, c-format
+msgid "%s (Port %s)"
+msgstr "Port"
 
-#: ../../standalone/harddrake2:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Alternative drivers"
-msgstr "กำลังพิมพ์กระดาษทดสอบ"
+msgid "Use network connection to backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
 
-#: ../../standalone/keyboarddrake:1
+#: ../../security/help.pm:1
 #, c-format
-msgid "Do you want the BackSpace to return Delete in console?"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+" Enable/Disable sulogin(8) in single user level."
 msgstr ""
 
-#: ../../standalone/keyboarddrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "Please, choose your keyboard layout."
-msgstr "คุณต้องการเลือกคีย์บอร์ดเลย์เอ้าท์แบบใด "
+msgid ""
+"It is now time to specify which programs you wish to install on your\n"
+"system. There are thousands of packages available for Mandrake Linux, and\n"
+"to make it simpler to manage the packages have been placed into groups of\n"
+"similar applications.\n"
+"\n"
+"Packages are sorted into groups corresponding to a particular use of your\n"
+"machine. Mandrake Linux has four predefined installations available. You\n"
+"can think of these installation classes as containers for various packages.\n"
+"You can mix and match applications from the various groups, so a\n"
+"``Workstation'' installation can still have applications from the\n"
+"``Development'' group installed.\n"
+"\n"
+" * \"%s\": if you plan to use your machine as a workstation, select one or\n"
+"more of the applications that are in the workstation group.\n"
+"\n"
+" * \"%s\": if plan on using your machine for programming, choose the\n"
+"appropriate packages from that group.\n"
+"\n"
+" * \"%s\": if your machine is intended to be a server, select which of the\n"
+"more common services you wish to install on your machine.\n"
+"\n"
+" * \"%s\": this is where you will choose your preferred graphical\n"
+"environment. At least one must be selected if you want to have a graphical\n"
+"interface available.\n"
+"\n"
+"Moving the mouse cursor over a group name will display a short explanatory\n"
+"text about that group. If you unselect all groups when performing a regular\n"
+"installation (as opposed to an upgrade), a dialog will pop up proposing\n"
+"different options for a minimal installation:\n"
+"\n"
+" * \"%s\": install the minimum number of packages possible to have a\n"
+"working graphical desktop.\n"
+"\n"
+" * \"%s\": installs the base system plus basic utilities and their\n"
+"documentation. This installation is suitable for setting up a server.\n"
+"\n"
+" * \"%s\": will install the absolute minimum number of packages necessary\n"
+"to get a working Linux system. With this installation you will only have a\n"
+"command line interface. The total size of this installation is about 65\n"
+"megabytes.\n"
+"\n"
+"You can check the \"%s\" box, which is useful if you are familiar with the\n"
+"packages being offered or if you want to have total control over what will\n"
+"be installed.\n"
+"\n"
+"If you started the installation in \"%s\" mode, you can unselect all groups\n"
+"to avoid installing any new package. This is useful for repairing or\n"
+"updating an existing system."
+msgstr ""
 
-#: ../../standalone/livedrake:1
+#: ../../any.pm:1 ../../help.pm:1
 #, c-format
-msgid "Unable to start live upgrade !!!\n"
-msgstr "ไม่สามารถเริ่ม live upgrade !!!\n"
+msgid "Accept user"
+msgstr "ยอมรับผู้ใช้"
 
-#: ../../standalone/livedrake:1
+#: ../../help.pm:1 ../../diskdrake/dav.pm:1
 #, c-format
-msgid ""
-"Please insert the Installation Cd-Rom in your drive and press Ok when done.\n"
-"If you don't have it, press Cancel to avoid live upgrade."
-msgstr ""
+msgid "Server"
+msgstr "เซิร์ฟเวอร์"
 
-#: ../../standalone/livedrake:1
+#: ../../interactive/stdio.pm:1
 #, c-format
-msgid "Change Cd-Rom"
-msgstr "เปลี่ยน CD-ROM"
+msgid "Bad choice, try again\n"
+msgstr "ตัวเลือกผิดพลาด โปรดทดลองอีกครั้ง\n"
 
-#: ../../standalone/localedrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "The change is done, but to be effective you must logout"
+msgid "Heard and McDonald Islands"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../harddrake/sound.pm:1
 #, c-format
-msgid "Save as.."
-msgstr "บันทึกแฟ้มเป็น"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Please enter your email address below "
-msgstr "โปรดลองอีกครั้ง"
+msgid "No alternative driver"
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "alert configuration"
-msgstr "การคอนฟิก"
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Toggle to expert mode"
+msgstr "ปกติ > สำหรับผู้ชำนาญ"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/cups.pm:1
 #, c-format
-msgid "You will receive an alert if the load is higher than this value"
+msgid "(on this machine)"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../network/network.pm:1
 #, fuzzy, c-format
-msgid "load setting"
-msgstr "ฟอร์แมต"
+msgid "Gateway address should be in format 1.2.3.4"
+msgstr "ค่าของ IP ควรอยู่ในรูปแบบ 1.2.3.4"
 
-#: ../../standalone/logdrake:1
+#: ../../network/modem.pm:1
 #, c-format
 msgid ""
-"You will receive an alert if one of the selected services is no longer "
-"running"
+"\"%s\" based winmodem detected, do you want to install needed software ?"
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "service setting"
-msgstr "อุปกรณ์"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Xinetd Service"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Webmin Service"
-msgstr "อุปกรณ์"
-
-#: ../../standalone/logdrake:1
+#: ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "SSH Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+msgid "Looking at packages already installed..."
+msgstr "คุณไม่สามารถไม่เลือกแพกเกจนี้เพราะมันได้ถูกติดตั้งไปแล้ว"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Samba Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "Use Differential Backups"
+msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Postfix Mail Server"
-msgstr "ชื่อเซิร์ฟเวอร์ของพรินเตอร์"
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "Driver"
+msgstr "Driver"
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Ftp Server"
-msgstr "เซิร์ฟเวอร์ NIS"
+#: ../../services.pm:1
+#, c-format
+msgid ""
+"Linuxconf will sometimes arrange to perform various tasks\n"
+"at boot-time to maintain the system configuration."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Domain Name Resolver"
-msgstr "ชื่อโดเมน"
+msgid "Printer on remote lpd server"
+msgstr "รีโมต lpd"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Apache World Wide Web Server"
+msgid ""
+"Before installing any fonts, be sure that you have the right to use and "
+"install them on your system.\n"
+"\n"
+"-You can install the fonts the normal way. In rare cases, bogus fonts may "
+"hang up your X Server."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
 msgid ""
-"Welcome to the mail configuration utility.\n"
+"Yaboot is a bootloader for NewWorld Macintosh hardware and can be used to\n"
+"boot GNU/Linux, MacOS or MacOSX. Normally, MacOS and MacOSX are correctly\n"
+"detected and installed in the bootloader menu. If this is not the case, you\n"
+"can add an entry by hand in this screen. Be careful to choose the correct\n"
+"parameters.\n"
 "\n"
-"Here, you'll be able to set up the alert system.\n"
+"Yaboot's main options are:\n"
+"\n"
+" * Init Message: a simple text message displayed before the boot prompt.\n"
+"\n"
+" * Boot Device: indicates where you want to place the information required\n"
+"to boot to GNU/Linux. Generally, you set up a bootstrap partition earlier\n"
+"to hold this information.\n"
+"\n"
+" * Open Firmware Delay: unlike LILO, there are two delays available with\n"
+"yaboot. The first delay is measured in seconds and at this point, you can\n"
+"choose between CD, OF boot, MacOS or Linux;\n"
+"\n"
+" * Kernel Boot Timeout: this timeout is similar to the LILO boot delay.\n"
+"After selecting Linux, you will have this delay in 0.1 second increments\n"
+"before your default kernel description is selected;\n"
+"\n"
+" * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
+"at the first boot prompt.\n"
+"\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt.\n"
+"\n"
+" * Default OS: you can select which OS will boot by default when the Open\n"
+"Firmware Delay expires."
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
+#, c-format
+msgid "No mouse"
+msgstr "ไม่มีเม้าส์"
+
+#: ../../crypto.pm:1 ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Mail alert configuration"
-msgstr "การปรับแต่ง LAN"
+msgid "Germany"
+msgstr "เยอรมัน"
 
-#: ../../standalone/logdrake:1
+#: ../../crypto.pm:1 ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Austria"
+msgstr "พอร์ตอนุกรม"
+
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "Mail alert"
+msgid "Run \"sndconfig\" after installation to configure your sound card"
 msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../my_gtk.pm:1 ../../ugtk2.pm:1
 #, c-format
-msgid "please wait, parsing file: %s"
-msgstr "โปรดกรุณารอ,parsing file:%s"
+msgid "Collapse Tree"
+msgstr "ยุบ tree"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "Content of the file"
-msgstr "ข้อความของ file"
+#: ../../standalone/drakautoinst:1
+#, fuzzy, c-format
+msgid "Auto Install Configurator"
+msgstr "การคอนฟิกหลังการติดตั้ง"
 
-#: ../../standalone/logdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Calendar"
-msgstr "ปฎิทิน"
+msgid "Configure networking"
+msgstr "คอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../standalone/logdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Choose file"
-msgstr "เลือก file"
+msgid "Where do you want to install the bootloader?"
+msgstr "คุณจะติดตั้งบูตโหลดเดอร์ไว้ที่ไหน?"
 
-#: ../../standalone/logdrake:1
+#: ../../help.pm:1
 #, c-format
-msgid "but not matching"
-msgstr "but not matching"
+msgid ""
+"Your choice of preferred language will affect the language of the\n"
+"documentation, the installer and the system in general. Select first the\n"
+"region you are located in, and then the language you speak.\n"
+"\n"
+"Clicking on the \"%s\" button will allow you to select other languages to\n"
+"be installed on your workstation, thereby installing the language-specific\n"
+"files for system documentation and applications. For example, if you will\n"
+"host users from Spain on your machine, select English as the default\n"
+"language in the tree view and \"%s\" in the Advanced section.\n"
+"\n"
+"Note that you're not limited to choosing a single additional language. You\n"
+"may choose several ones, or even install them all by selecting the \"%s\"\n"
+"box. Selecting support for a language means translations, fonts, spell\n"
+"checkers, etc. for that language will be installed. Additionally, the\n"
+"\"%s\" checkbox allows you to force the system to use unicode (UTF-8). Note\n"
+"however that this is an experimental feature. If you select different\n"
+"languages requiring different encoding the unicode support will be\n"
+"installed anyway.\n"
+"\n"
+"To switch between the various languages installed on the system, you can\n"
+"launch the \"/usr/sbin/localedrake\" command as \"root\" to change the\n"
+"language used by the entire system. Running the command as a regular user\n"
+"will only change the language settings for that particular user."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/scannerdrake:1
 #, c-format
-msgid "matching"
-msgstr "matching"
+msgid "The %s is not supported by this version of Mandrake Linux."
+msgstr ""
 
-#: ../../standalone/logdrake:1 ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Settings"
-msgstr "ค่าติดตั้ง"
+msgid "DHCP client"
+msgstr "DHCP client"
 
-#: ../../standalone/logdrake:1
+#: ../../partition_table.pm:1
 #, c-format
-msgid "A tool to monitor your logs"
-msgstr "อุปกรณ์ตรวจสอบ logs"
+msgid "Restoring from file %s failed: %s"
+msgstr "การกู้คืนจากไฟล์ %s ล้มเหลว: %s"
 
-#: ../../standalone/logdrake:1
+#: ../../mouse.pm:1
 #, c-format
-msgid "search"
-msgstr "ค้นหา"
+msgid "Logitech Mouse (serial, old C7 type)"
+msgstr "Logitech Mouse (พอร์ตอนุกรม, แบบเก่า C7)"
 
-#: ../../standalone/logdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Mandrake Tools Explanation"
+msgid "Are you sure that you want to set up printing on this machine?\n"
 msgstr ""
 
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Syslog"
-msgstr "syslog"
-
-#: ../../standalone/logdrake:1
-#, fuzzy, c-format
-msgid "Messages"
-msgstr "ข้อความ"
-
-#: ../../standalone/logdrake:1
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "User"
-msgstr "ชื่อผู้ใช้"
-
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/Help/_About..."
-msgstr "/ช่วยเหลือ/_เกี่ยวกับ..."
+msgid "New devfs device"
+msgstr "อุปกรณ์เกตเวย์"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "/Options/Test"
-msgstr "/Options/ทดลอง"
+msgid "ERROR: Cannot spawn %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakboot:1
 #, c-format
-msgid "/File/-"
-msgstr "/ไฟล์/-"
+msgid "Boot Style Configuration"
+msgstr "Boot Style Configuration"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/Save _As"
-msgstr "/ไฟล์/บันทึก_เป็น"
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Automatic time synchronization"
+msgstr "Boot Style Configuration"
 
-#: ../../standalone/logdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "<control>S"
-msgstr "<control>S"
+msgid "Backup files not found at %s."
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../share/advertising/01-thanks.pl:1
 #, c-format
-msgid "/File/_Save"
-msgstr "/ไฟล์/_บันทึก"
+msgid "Thank you for choosing Mandrake Linux 9.1"
+msgstr ""
 
-#: ../../standalone/logdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "<control>O"
-msgstr "<control>O"
+msgid "Armenian (phonetic)"
+msgstr "อาร์เมเนียน (โฟเนติค)"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/_Open"
-msgstr "/ไฟล์/_เปิด"
+#: ../../harddrake/v4l.pm:1
+#, fuzzy, c-format
+msgid "Card model:"
+msgstr "Card mem (DMA)"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "<control>N"
-msgstr "<control>N"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Thin Client"
+msgstr "DHCP Client"
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "/File/_New"
-msgstr "/ไฟล์/_ใหม่"
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Start Server"
+msgstr "เซิร์ฟเวอร์ NIS"
 
-#: ../../standalone/logdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Show only for the selected day"
+msgid "Turkmenistan"
 msgstr ""
 
-#: ../../standalone/mousedrake:1
-#, c-format
-msgid "Emulate third button?"
-msgstr "ต้องการจำลองเม้าส์ปุ่มที่สามด้วยหรือไม่?"
-
-#: ../../standalone/mousedrake:1
-#, c-format
-msgid "Please choose your mouse type."
-msgstr "คุณมีเม้าส์ชนิดใด"
-
-#: ../../standalone/net_monitor:1
+#: ../../standalone/scannerdrake:1
 #, fuzzy, c-format
-msgid "Connect %s"
-msgstr "เชื่อมต่ออยู่"
+msgid "All remote machines"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakboot:1
 #, fuzzy, c-format
-msgid "Disconnect %s"
-msgstr "ยกเลิกติดต่อ..."
+msgid "Install themes"
+msgstr "ติดตั้งระบบ"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
-"Warning, another internet connection has been detected, maybe using your "
-"network"
-msgstr ""
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "received"
+" updates 2002 MandrakeSoft by Stew Benedict <sbenedict\\@mandrakesoft.com>"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../help.pm:1
 #, c-format
-msgid "transmitted"
+msgid "Espanol"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../install_steps_interactive.pm:1
 #, c-format
-msgid "received: "
-msgstr ""
+msgid "Preparing installation"
+msgstr "กำลังเตรียมการติดตั้ง"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "sent: "
+msgid "Edit selected host/network"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakTermServ:1
 #, fuzzy, c-format
-msgid "Local measure"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Add User -->"
+msgstr "เพิ่มผู้ใช้"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, c-format
-msgid "average"
+msgid "Nauru"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "Color configuration"
-msgstr "การคอนฟิก"
+msgid "True Type fonts installation"
+msgstr "กำลังเตรียมการติดตั้ง"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"Connection failed.\n"
-"Verify your configuration in the Mandrake Control Center."
+msgid "Auto-detect printers connected directly to the local network"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid "LAN configuration"
+msgstr "การปรับแต่ง LAN"
+
+#: ../../standalone/harddrake2:1
 #, fuzzy, c-format
-msgid "Connection complete."
-msgstr "ชนิดการเชื่อมต่อ"
+msgid "hard disk model"
+msgstr "Card mem (DMA)"
 
-#: ../../standalone/net_monitor:1
+#: ../../fsedit.pm:1
 #, c-format
-msgid "Disconnection from the Internet complete."
-msgstr ""
+msgid "You can't use a LVM Logical Volume for mount point %s"
+msgstr "คุณไม่สามารถใช้ LVM Logical Volume สำหรับ %s"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakfont:1
 #, c-format
-msgid "Disconnection from the Internet failed."
+msgid "Get Windows Fonts"
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Connecting to the Internet "
-msgstr "ต่อเข้า Internet "
+#: ../../mouse.pm:1
+#, c-format
+msgid "Mouse Systems"
+msgstr "Mouse Systems"
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Disconnecting from the Internet "
-msgstr "ต่อเข้า Internet "
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Iranian"
+msgstr "Iranian"
 
-#: ../../standalone/net_monitor:1
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Wait please, testing your connection..."
-msgstr "ทดสอบ connection..."
+msgid "Croatia"
+msgstr "Croatian"
 
-#: ../../standalone/net_monitor:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Logs"
-msgstr ""
+msgid "Gateway:"
+msgstr "เกตเวย์:"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Connection Time: "
-msgstr "ชนิดการเชื่อมต่อ"
-
-#: ../../standalone/net_monitor:1
-#, c-format
-msgid "Receiving Speed:"
-msgstr ""
+msgid "Add server"
+msgstr "เพิ่มผู้ใช้"
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Sending Speed:"
-msgstr "บันทึกลงไฟล์"
+msgid "Remote printer name"
+msgstr "เครื่องพิมพ์แบบรีโมท"
 
-#: ../../standalone/net_monitor:1
+#: ../../share/advertising/10-security.pl:1
 #, c-format
-msgid "Statistics"
+msgid ""
+"MandrakeSoft has designed exclusive tools to create the most secured Linux "
+"version ever: Draksec, a system security management tool, and a strong "
+"firewall are teamed up together  in order to highly reduce hacking risks."
 msgstr ""
 
-#: ../../standalone/net_monitor:1
-#, fuzzy, c-format
-msgid "Profile "
-msgstr "Profile: "
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "Device: "
+msgstr "อุปกรณ์: "
 
-#: ../../standalone/net_monitor:1
+#: ../../printer/printerdrake.pm:1 ../../standalone/printerdrake:1
 #, fuzzy, c-format
-msgid "Network Monitoring"
-msgstr "การคอนฟิกระบบเน็ตเวิร์ก"
+msgid "Printerdrake"
+msgstr "เครื่องพิมพ์"
 
-#: ../../standalone/printerdrake:1
+#: ../../install_steps_interactive.pm:1
+#, c-format
+msgid "License agreement"
+msgstr "License agreement"
+
+#: ../../standalone/draksec:1
 #, fuzzy, c-format
-msgid "Reading data of installed printers..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "System Options"
+msgstr "อ๊อปชั่นของโมดูล:"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "Name/IP address of host:"
+msgid "Please enter the directory where backups are stored"
 msgstr ""
 
+#: ../../security/level.pm:1
+#, fuzzy, c-format
+msgid "Please choose the desired security level"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "This host is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/main.pm:1
 #, fuzzy, c-format
-msgid "Scannerdrake"
-msgstr "เลือกกราฟฟิคการ์ด"
+msgid ", USB printer"
+msgstr "ไม่มีเครื่องพิมพ์"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakfont:1
 #, fuzzy, c-format
-msgid "You must enter a host name or an IP address.\n"
-msgstr "กรุณาทดสอบเม้าส์"
+msgid "Choose the applications that will support the fonts:"
+msgstr "เลือกพาร์ติชั่นที่คุณต้องการฟอร์แมต"
 
-#: ../../standalone/scannerdrake:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Choose the host on which the local scanners should be made available:"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Sharing of local scanners"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Configure X"
+msgstr "คอนฟิกระบบ X"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "This machine"
-msgstr "matching"
+#: ../../keyboard.pm:1
+#, c-format
+msgid "Turkish (traditional \"F\" model)"
+msgstr "ตุรกี (โมเดลแบบแผน \"F\")"
 
+#: ../../standalone/drakautoinst:1 ../../standalone/drakgw:1
 #: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Remove selected host"
-msgstr "ลบคิว"
+#, c-format
+msgid "Congratulations!"
+msgstr "ขอแสดงความยินดี"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Edit selected host"
-msgstr "ค้นพบ %s"
+msgid "Use owner id for execution"
+msgstr "ใช้ auto detection"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakperm:1
 #, fuzzy, c-format
-msgid "Add host"
-msgstr "เพิ่มผู้ใช้"
+msgid "Down"
+msgstr "ทำเรียบร้อยแล้ว"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/main.pm:1 ../../printer/printerdrake.pm:1
 #, c-format
-msgid "These are the machines from which the scanners should be used:"
+msgid "Raw printer (No driver)"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Usage of remote scanners"
-msgstr "ใช้พื้นที่ที่ว่าง"
-
-#: ../../standalone/scannerdrake:1
+#: ../../network/modem.pm:1
 #, fuzzy, c-format
-msgid "All remote machines"
-msgstr "เครื่องพิมพ์แบบรีโมท"
+msgid "Install rpm"
+msgstr "ติดตั้ง"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"These are the machines on which the locally connected scanner(s) should be "
-"available:"
+"To print a file from the command line (terminal window) you can either use "
+"the command \"%s <file>\" or a graphical printing tool: \"xpp <file>\" or "
+"\"kprinter <file>\". The graphical tools allow you to choose the printer and "
+"to modify the option settings easily.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../install_steps_gtk.pm:1
 #, c-format
-msgid "Use the scanners on hosts: "
-msgstr ""
+msgid "Time remaining "
+msgstr "เวลาที่เหลือ "
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "Use scanners on remote computers"
+msgid "UK keyboard"
+msgstr "อังกฤษ"
+
+#: ../../diskdrake/dav.pm:1 ../../diskdrake/interactive.pm:1
+#: ../../diskdrake/smbnfs_gtk.pm:1
+#, c-format
+msgid "Unmount"
+msgstr "เลิกเม้าท์์ระบบไฟล์"
+
+#: ../../standalone/drakfont:1
+#, c-format
+msgid "Uninstall Fonts"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../mouse.pm:1
 #, fuzzy, c-format
-msgid "Scanner sharing to hosts: "
-msgstr "เครื่องพิมพ์"
+msgid "Microsoft Explorer"
+msgstr "Microsoft IntelliMouse"
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "The scanners on this machine are available to other computers"
-msgstr ""
+msgid "German (no dead keys)"
+msgstr "German (no dead keys)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid ""
-"You can also decide here whether scanners on remote machines should be made "
-"available on this machine."
+msgid "Transferring %s..."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/resolution_and_depth.pm:1
 #, c-format
-msgid ""
-"Here you can choose whether the scanners connected to this machine should be "
-"accessable by remote machines and by which remote machines."
-msgstr ""
+msgid "32 thousand colors (15 bits)"
+msgstr "สามหมื่นสองพันสี (15 บิต)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../any.pm:1
 #, c-format
-msgid "Re-generating list of configured scanners ..."
+msgid ""
+"You can export using NFS or Samba. Please select which you'd like to use."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for new scanners ..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Searching for configured scanners ..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
-
-#: ../../standalone/scannerdrake:1
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1
 #, fuzzy, c-format
-msgid "Scanner sharing"
-msgstr "เครื่องพิมพ์"
+msgid "Reboot"
+msgstr "Root"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid "Add a scanner manually"
+msgid "Gambia"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbug:1
 #, fuzzy, c-format
-msgid "Search for new scanners"
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Mandrake Control Center"
+msgstr "Control Center"
 
-#: ../../standalone/scannerdrake:1
+#: ../../network/drakfirewall.pm:1
 #, c-format
-msgid "There are no scanners found which are available on your system.\n"
-msgstr ""
-
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
 msgid ""
-"The following scanner\n"
-"\n"
-"%s\n"
-"is available on your system.\n"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+"You can enter miscellaneous ports. \n"
+"Valid examples are: 139/tcp 139/udp.\n"
+"Have a look at /etc/services for information."
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
+#: ../../help.pm:1
+#, c-format
 msgid ""
-"The following scanners\n"
+"Monitor\n"
 "\n"
-"%s\n"
-"are available on your system.\n"
-msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
+"   The installer will normally automatically detect and configure the\n"
+"monitor connected to your machine. If it is correct, you can choose from\n"
+"this list the monitor you actually have connected to your computer."
+msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"Your %s has been configured.\n"
-"You may now scan documents using \"XSane\" from Multimedia/Graphics in the "
-"applications menu."
+msgid "\t-Tape \n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "choose device"
-msgstr "อุปกรณ์บูต"
-
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakhelp:1
 #, c-format
-msgid "Please select the device where your %s is attached"
+msgid ""
+"No browser is installed on your system, Please install one if you want to "
+"browse the help system"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, fuzzy, c-format
-msgid "Searching for scanners ..."
-msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+msgid "Remember this password"
+msgstr "ไม่มีรหัสผ่าน"
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Auto-detect available ports"
-msgstr "ใช้ auto detection"
+#: ../../standalone/drakgw:1
+#, c-format
+msgid "Internet Connection Sharing is now enabled."
+msgstr "การเชื่อมต่อกับ Internet แบบ sharing เริ่มทำงานแล้ว"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "(Note: Parallel ports cannot be auto-detected)"
+msgid "\t-Network by SSH.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
-"The %s must be configured by printerdrake.\n"
-"You can launch printerdrake from the Mandrake Control Center in Hardware "
-"section."
+" If the desired printer was auto-detected, simply choose it from the list "
+"and then add user name, password, and/or workgroup if needed."
 msgstr ""
 
+#: ../../help.pm:1 ../../install_interactive.pm:1
+#, c-format
+msgid "Use the free space on the Windows partition"
+msgstr "ใช้พื้นที่ที่ว่างใน Windows partition"
+
 #: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "%s found on %s, configure it automatically?"
+msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"
+
+#: ../../security/help.pm:1
 #, c-format
-msgid "The %s is unsupported"
+msgid ""
+"Arguments: (arg)\n"
+"\n"
+"Use password to authenticate users."
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../Xconfig/various.pm:1
 #, c-format
-msgid "The %s is not known by this version of Scannerdrake."
+msgid "XFree86 driver: %s\n"
+msgstr "ไดร์เวอร์ XFree86: %s\n"
+
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "This host/network is already in the list, it cannot be added again.\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "The %s is not supported by this version of Mandrake Linux."
+msgid ""
+"\n"
+"                      DrakBackup Report \n"
+"\n"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "Port: %s"
-msgstr "Port"
+#: ../../install_steps_gtk.pm:1 ../../install_steps_interactive.pm:1
+#, c-format
+msgid "Choose the packages you want to install"
+msgstr "เลือกแพ็คเก็จที่คุณต้องการติดตั้ง"
 
-#: ../../standalone/scannerdrake:1
+#: ../../lang.pm:1
 #, c-format
-msgid ", "
+msgid "Papua New Guinea"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../keyboard.pm:1
 #, fuzzy, c-format
-msgid "Detected model: %s"
-msgstr "ค้นพบ %s"
+msgid "Serbian (cyrillic)"
+msgstr "Azerbaidjani (cyrillic)"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/draksplash:1
 #, c-format
-msgid " ("
+msgid "Make kernel message quiet by default"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Select a scanner model"
-msgstr "เลือกกราฟฟิคการ์ด"
+msgid ""
+"Do you want to set this printer (\"%s\")\n"
+"as the default printer?"
+msgstr "คุณต้องการพิมพ์ทดสอบหรือไม่?"
 
-#: ../../standalone/scannerdrake:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "%s is not in the scanner database, configure it manually?"
+msgid "The DHCP end range"
 msgstr ""
 
-#: ../../standalone/scannerdrake:1
-#, fuzzy, c-format
-msgid "%s found on %s, configure it automatically?"
-msgstr "คุณต้องการคอนฟิกเครื่องพิมพ์ด้วยหรือไม่"
+#: ../../any.pm:1
+#, c-format
+msgid "Creating bootdisk..."
+msgstr "กำลังสร้างแผ่นบูต"
 
-#: ../../standalone/service_harddrake:1
+#: ../../standalone/net_monitor:1
 #, fuzzy, c-format
-msgid "Hardware probing in progress"
-msgstr "ค้นหาเจอบน port %s"
+msgid "Wait please, testing your connection..."
+msgstr "ทดสอบ connection..."
 
-#: ../../standalone/service_harddrake:1
+#: ../../install_interactive.pm:1
 #, c-format
-msgid "Some devices were added:\n"
-msgstr ""
+msgid "Bringing down the network"
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
 
-#: ../../standalone/service_harddrake:1
+#: ../../network/modem.pm:1 ../../standalone/drakconnect:1
 #, c-format
-msgid "Some devices in the \"%s\" hardware class were removed:\n"
-msgstr ""
+msgid "Login ID"
+msgstr "หมายเลขประจำตัวการล็อกอิน"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"The success of MandrakeSoft is based upon the principle of Free Software. "
-"Your new operating system is the result of collaborative work of the "
-"worldwide Linux Community."
+"NFS is a popular protocol for file sharing across TCP/IP\n"
+"networks. This service provides NFS file locking functionality."
 msgstr ""
+"NFS คือ protocol ที่ใช้กันอย่างแหร่หลายสำหรับการแชร์ไฟล์บนTCP/IP networks.\n"
+"มันให้การทำงานของNFS server "
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Welcome to the Open Source world."
-msgstr ""
+msgid "DHCP Client"
+msgstr "DHCP Client"
 
-#: ../../share/advertising/01-thanks.pl:1
+#: ../../standalone/drakgw:1
 #, c-format
-msgid "Thank you for choosing Mandrake Linux 9.1"
-msgstr ""
+msgid "dismiss"
+msgstr "เลิก"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Printing/Scanning on \"%s\""
+msgstr "ระบบเน็ตเวิร์กกำลังจะหยุดทำงาน"
+
+#: ../../standalone/drakfloppy:1
 #, c-format
-msgid ""
-"To share your own knowledge and help build Linux software, join our "
-"discussion forums on our \"Community\" webpages."
-msgstr ""
+msgid "omit raid modules"
+msgstr "ยกเว้น raid modules"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../services.pm:1
 #, c-format
 msgid ""
-"Want to know more and to contribute to the Open Source community? Get "
-"involved in the Free Software world!"
+"lpd is the print daemon required for lpr to work properly. It is\n"
+"basically a server that arbitrates print jobs to printer(s)."
 msgstr ""
+"lpd คือ print daemon ที่จำเป็นต้องมีถ้าต้องการให้ lpr ทำงานถูกต้อง\n"
+"ที่จริงแล้วมันคือ server ที่จัดการส่งงานพิมพ์ไปเครื่องพิมพ์"
 
-#: ../../share/advertising/02-community.pl:1
+#: ../../standalone/drakconnect:1
 #, c-format
-msgid "Build the future of Linux!"
-msgstr ""
+msgid "Internet Connection Configuration"
+msgstr "การปรับแต่งการติดต่อเข้า internet"
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../modules/parameters.pm:1
 #, c-format
-msgid ""
-"And, of course, push multimedia to its limits with the very latest software "
-"to play videos, audio files and to handle your images or photos."
+msgid "comma separated numbers"
 msgstr ""
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/harddrake2:1
 #, c-format
 msgid ""
-"Surf the Web with Mozilla or Konqueror, read your mail with Evolution or "
-"Kmail, create your documents with OpenOffice.org."
+"Once you've selected a device, you'll be able to see the device information "
+"in fields displayed on the right frame (\"Information\")"
 msgstr ""
 
-#: ../../share/advertising/03-software.pl:1
+#: ../../standalone/drakperm:1
 #, c-format
-msgid "MandrakeSoft has selected the best software for you"
+msgid "Move selected rule up one level"
 msgstr ""
 
-#: ../../share/advertising/04-configuration.pl:1
-#, c-format
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
 msgid ""
-"Mandrake Linux 9.1 provides you with the Mandrake Control Center, a powerful "
-"tool to fully adapt your computer to the use you make of it. Configure and "
-"customize elements such as the security level, the peripherals (screen, "
-"mouse, keyboard...), the Internet connection and much more!"
-msgstr ""
+"The following scanner\n"
+"\n"
+"%s\n"
+"is available on your system.\n"
+msgstr "ไม่มีอุปกรณ์ Network บนเครื่องคุณ"
 
-#: ../../share/advertising/04-configuration.pl:1
+#: ../../printer/printerdrake.pm:1
 #, fuzzy, c-format
-msgid "Mandrake's multipurpose configuration tool"
-msgstr "การคอนฟิก Internet"
+msgid "Do you really want to remove the printer \"%s\"?"
+msgstr "คุณต้องการเริ่มทำงาน Network ใหม่หรือไม่"
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../install_interactive.pm:1
+#, c-format
+msgid "I can't find any room for installing"
+msgstr "ผมไม่สามารถหาพื้นที่ว่างเพื่อทำการติดตั้ง"
+
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Default printer"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+
+#: ../../network/netconnect.pm:1
 #, c-format
 msgid ""
-"Perfectly adapt your computer to your needs thanks to the 11 available "
-"Mandrake Linux user interfaces which can be fully modified: KDE 3.1, GNOME "
-"2.2, Window Maker, ..."
+"You have configured multiple ways to connect to the Internet.\n"
+"Choose the one you want to use.\n"
+"\n"
 msgstr ""
 
-#: ../../share/advertising/05-desktop.pl:1
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid "A customizable environment"
-msgstr ""
+msgid "Modify RAID"
+msgstr "แก้ไข RAID"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../network/isdn.pm:1
 #, c-format
 msgid ""
-"To modify and to create in different languages such as Perl, Python, C and C+"
-"+ has never been so easy thanks to GNU gcc 3 and the best Open Source "
-"development environments."
-msgstr ""
+"I have detected an ISDN PCI card, but I don't know its type. Please select a "
+"PCI card on the next screen."
+msgstr "ผมเจอการ์ด ISDN แบบ PCI แต่ผมไม่ทราบชนิด กรุณาเลือกหนื่งในการ์ด PCI ในหน้าต่อไป"
 
-#: ../../share/advertising/06-development.pl:1
+#: ../../any.pm:1
 #, c-format
-msgid "Mandrake Linux 9.1: the ultimate development platform"
-msgstr ""
+msgid "Add user"
+msgstr "เพิ่มผู้ใช้"
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../diskdrake/interactive.pm:1
+#, c-format
+msgid "RAID-disks %s\n"
+msgstr "ดิสก์แบบ RAID %s\n"
+
+#: ../../lang.pm:1
+#, fuzzy, c-format
+msgid "Liberia"
+msgstr "พอร์ตอนุกรม"
+
+#: ../../standalone/drakgw:1
 #, c-format
 msgid ""
-"Transform your computer into a powerful Linux server: Web server, mail, "
-"firewall, router, file and print server (etc.) are just a few clicks away!"
+"Please enter the name of the interface connected to the internet.\n"
+"\n"
+"Examples:\n"
+"\t\tppp+ for modem or DSL connections, \n"
+"\t\teth0, or eth1 for cable connection, \n"
+"\t\tippp+ for a isdn connection.\n"
 msgstr ""
 
-#: ../../share/advertising/07-server.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid "Turn your computer into a reliable server"
-msgstr ""
+msgid "Choose your keyboard"
+msgstr "เลือกคีย์บอร์ด"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../steps.pm:1
 #, c-format
-msgid ""
-"Our full range of Linux solutions, as well as special offers on products and "
-"other \"goodies\", are available on our e-store:"
-msgstr ""
+msgid "Format partitions"
+msgstr "ฟอร์แมตพาร์ติชั่น"
 
-#: ../../share/advertising/08-store.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Automatic correction of CUPS configuration"
+msgstr "Boot Style Configuration"
+
+#: ../../standalone/harddrake2:1
+#, fuzzy, c-format
+msgid "Running \"%s\" ..."
+msgstr "อ่าน CUPS drivers database..."
+
+#: ../../harddrake/v4l.pm:1
 #, c-format
-msgid "The official MandrakeSoft Store"
+msgid "enable radio support"
 msgstr ""
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scanner sharing to hosts: "
+msgstr "เครื่องพิมพ์"
+
+#: ../../diskdrake/interactive.pm:1
 #, c-format
-msgid ""
-"Enhance your computer performance with the help of a selection of partners "
-"offering professional solutions compatible with Mandrake Linux"
-msgstr ""
+msgid "Loopback file name: %s"
+msgstr "Loopback file name: %s"
 
-#: ../../share/advertising/09-mdksecure.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Please choose the printer to which the print jobs should go."
+msgstr "คุณต้องการให้โมเด็มของคุณต่อกับพอร์ตอนุกรมใด?"
+
+#: ../../printer/printerdrake.pm:1
 #, c-format
-msgid "Get the best items with Mandrake Linux Strategic partners"
+msgid "Do not transfer printers"
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../help.pm:1
+#, fuzzy, c-format
+msgid "Delay before booting the default image"
+msgstr "หน่วงเวลาก่อนทำการบูตอิมเมจที่ใช้"
+
+#: ../../standalone/drakfont:1
 #, c-format
 msgid ""
-"MandrakeSoft has designed exclusive tools to create the most secured Linux "
-"version ever: Draksec, a system security management tool, and a strong "
-"firewall are teamed up together  in order to highly reduce hacking risks."
+"\n"
+" Copyright (C) 2001-2002 by MandrakeSoft \n"
+"     DUPONT Sebastien (original version)\n"
+"     CHAUMETTE Damien <dchaumette\\@mandrakesoft.com>\n"
+"\n"
+" This program is free software; you can redistribute it and/or modify\n"
+" it under the terms of the GNU General Public License as published by\n"
+" the Free Software Foundation; either version 2, or (at your option)\n"
+" any later version.\n"
+"\n"
+" This program is distributed in the hope that it will be useful,\n"
+" but WITHOUT ANY WARRANTY; without even the implied warranty of\n"
+" MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the\n"
+" GNU General Public License for more details.\n"
+"\n"
+" You should have received a copy of the GNU General Public License\n"
+" along with this program; if not, write to the Free Software\n"
+" Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.\n"
+"\n"
+" Thanks:\n"
+"    -  pfm2afm:   \n"
+"\t by Ken Borgendale:\n"
+"\t    Convert a Windows .pfm  file to a .afm (Adobe Font Metrics)\n"
+"    -  type1inst:\n"
+"\t by James Macnicol: \n"
+"\t    type1inst generates files fonts.dir fonts.scale & Fontmap.\n"
+"    -  ttf2pt1:   \n"
+"\t  by Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
+"             Convert ttf font files to afm and pfb fonts\n"
 msgstr ""
 
-#: ../../share/advertising/10-security.pl:1
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Please check for multisession CD"
+msgstr "โปรดเลือกพาร์ติชั่น"
+
+#: ../../standalone/drakperm:1
+#, fuzzy, c-format
+msgid "user"
+msgstr "ชื่อผู้ใช้"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "Use Hard Disk to backup"
+msgstr "ไฟล์แบ็คอัพมีปัญหา"
+
+#: ../../help.pm:1 ../../install_steps_gtk.pm:1 ../../standalone/drakbackup:1
+#: ../../standalone/drakboot:1 ../../standalone/drakgw:1
 #, c-format
-msgid "Optimize your security by using Mandrake Linux"
+msgid "Configure"
+msgstr "การปรับแต่ง"
+
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Scannerdrake"
+msgstr "เลือกกราฟฟิคการ์ด"
+
+#: ../../standalone/drakconnect:1
+#, c-format
+msgid ""
+"Warning, another Internet connection has been detected, maybe using your "
+"network"
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid "This product is available on the MandrakeStore Web site."
+msgid "Backup Users"
 msgstr ""
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../network/network.pm:1
 #, c-format
 msgid ""
-"Complete your security setup with this very easy-to-use software which "
-"combines high performance components such as a firewall, a virtual private "
-"network (VPN) server and client, an intrusion detection system and a traffic "
-"manager."
+"Please enter your host name.\n"
+"Your host name should be a fully-qualified host name,\n"
+"such as ``mybox.mylab.myco.com''.\n"
+"You may also enter the IP address of the gateway if you have one."
 msgstr ""
+"โปรดใส่ชื่อของโฮสต์\n"
+"ชื่อของโฮสต์ควรใส่เต็มรูปแบบ (รวมชื่อโดเมนด้วย)\n"
+"ตัวอย่างเช่น ``mybox.mylab.yco.com''\n"
+"คุณอาจจะใส่ค่า IP ของเกตเวย์ด้วยถ้าคุณมีเครื่องที่ทำหน้าที่เป็นเกตเวย์อยู่"
 
-#: ../../share/advertising/11-mnf.pl:1
+#: ../../printer/printerdrake.pm:1
+#, fuzzy, c-format
+msgid "Select Printer Spooler"
+msgstr "เลือกการเชื่อมต่อกับเครื่องพิมพ์"
+
+#: ../../standalone/drakboot:1
+#, fuzzy, c-format
+msgid "Create new theme"
+msgstr "สร้างพาร์ติชั่นใหม่"
+
+#: ../../standalone/logdrake:1
 #, c-format
-msgid "Secure your networks with the Multi Network Firewall"
+msgid "Mandrake Tools Explanation"
 msgstr ""
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/drakpxe:1
+#, fuzzy, c-format
+msgid "No image found"
+msgstr "เครื่องพิมพ์โลคอล (ต่อติดกับตัวเครื่อง)"
+
+#: ../../install_steps.pm:1
 #, c-format
 msgid ""
-"Join the MandrakeSoft support teams and the Linux Community online to share "
-"your knowledge and help others by becoming a recognized Expert on the online "
-"technical support website:"
+"Some important packages didn't get installed properly.\n"
+"Either your cdrom drive or your cdrom is defective.\n"
+"Check the cdrom on an installed computer using \"rpm -qpl Mandrake/RPMS/*.rpm"
+"\"\n"
 msgstr ""
+"แพ็กเกจสำคัญบางอย่างไม่ได้ถูกติดตั้งอย่างเรียบร้อย\n"
+"cdrom หรือ cdrom drive ของคุณอาจมีการเสียหาย\n"
+"กรุณาตรวจสอบ cdrom ในเครื่องคอมพิวเตอร์ที่มีการติดตั้งแล้ว\n"
+"โดยใช้ \"rpm -qpl Mandrake/RPMS/*.rpm\"\n"
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../standalone/scannerdrake:1
+#, fuzzy, c-format
+msgid "Detected model: %s"
+msgstr "ค้นพบ %s"
+
+#: ../../standalone/drakedm:1
 #, c-format
 msgid ""
-"Find the solutions of your problems via MandrakeSoft's online support "
-"platform."
+"X11 Display Manager allows you to graphically log\n"
+"into your system with the X Window System running and supports running\n"
+"several different X sessions on your local machine at the same time."
 msgstr ""
 
-#: ../../share/advertising/12-mdkexpert.pl:1
+#: ../../security/help.pm:1
+#, c-format
+msgid "if set to yes, run the daily security checks."
+msgstr ""
+
+#: ../../lang.pm:1
 #, fuzzy, c-format
-msgid "Become a MandrakeExpert"
-msgstr "แบบผู้เชี่ยวชาญ (Expert)"
+msgid "Azerbaijan"
+msgstr "Iranian"
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../standalone/drakbackup:1
 #, c-format
-msgid ""
-"All incidents will be followed up by a single qualified MandrakeSoft "
-"technical expert."
+msgid "No tape in %s!"
 msgstr ""
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../keyboard.pm:1
 #, c-format
-msgid "An online platform to respond to enterprise support needs."
+msgid "Dvorak (US)"
+msgstr "Dvorak (US)"
+
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid ""
+"this is the physical bus on which the device is plugged (eg: PCI, USB, ...)"
 msgstr ""
 
-#: ../../share/advertising/13-mdkexpert_corporate.pl:1
+#: ../../printer/printerdrake.pm:1
+#, c-format
+msgid "How is the printer connected?"
+msgstr "เครื่องพิมพ์เชื่อมต่ออย่างไร?"
+
+#: ../../security/level.pm:1
 #, fuzzy, c-format
-msgid "MandrakeExpert Corporate"
-msgstr "แบบผู้เชี่ยวชาญ (Expert)"
+msgid "Security level"
+msgstr "เลือกระดับระบบรักษาความปลอดภัย"
+
+#: ../../standalone/draksplash:1
+#, fuzzy, c-format
+msgid "final resolution"
+msgstr "ขนาดจอภาพ"
+
+#: ../../help.pm:1 ../../install_steps_interactive.pm:1 ../../services.pm:1
+#, fuzzy, c-format
+msgid "Services"
+msgstr "อุปกรณ์"
+
+#: ../../Xconfig/card.pm:1
+#, c-format
+msgid "4 MB"
+msgstr "4 MB"
 
 #: ../../share/compssUsers:999
 msgid "Office Workstation"
@@ -16981,11 +17019,6 @@ msgstr ""
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Workstation"
-msgstr "Workstation ที่ทำงาน"
-
-#: ../../share/compssUsers:999
-#, fuzzy
 msgid "Game station"
 msgstr "Workstation ที่ทำงาน"
 
@@ -17059,10 +17092,6 @@ msgid ""
 msgstr ""
 
 #: ../../share/compssUsers:999
-msgid "Graphical Environment"
-msgstr "การทำงานแบบกราฟฟิก"
-
-#: ../../share/compssUsers:999
 #, fuzzy
 msgid "Gnome Workstation"
 msgstr "Workstation ที่ทำงาน"
@@ -17082,10 +17111,6 @@ msgid "Icewm, Window Maker, Enlightenment, Fvwm, etc"
 msgstr ""
 
 #: ../../share/compssUsers:999
-msgid "Development"
-msgstr "พัฒนาซอฟท์แวร์ (Development)"
-
-#: ../../share/compssUsers:999
 msgid "C and C++ development libraries, programs and include files"
 msgstr ""
 
@@ -17159,36 +17184,74 @@ msgstr ""
 
 #: ../../share/compssUsers:999
 #, fuzzy
-msgid "Audio station"
-msgstr "Multimedia - เขียน CD "
+msgid "Set of tools to read and send mail and news and to browse the Web"
+msgstr "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"
 
-#: ../../share/compssUsers:999
-msgid "Sound playing/editing programs"
-msgstr ""
+#~ msgid "Internet connection & configuration"
+#~ msgstr "การเชื่อมต่อ Internet และการปรับแต่ง"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Video station"
-msgstr "Workstation ที่ทำงาน"
+#~ msgid "Configure the connection"
+#~ msgstr "คอนฟิกระบบเน็ตเวิร์ก"
 
-#: ../../share/compssUsers:999
-msgid "Video playing programs"
-msgstr ""
+#, fuzzy
+#~ msgid "Disconnect"
+#~ msgstr "ยกเลิกติดต่อ..."
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphic station"
-msgstr "Workstation ที่ทำงาน"
+#~ msgid "Connect"
+#~ msgstr "เชื่อมต่ออยู่"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "คุณสามารถคอนฟิกระบบเน็ตเวิร์กใหม่"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can connect to the Internet or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "คุณสามารถเชื่อมต่อ Internet หรือทำการแก้ใขการเชื่อมต่อใหม่"
+
+#~ msgid "You are not currently connected to the Internet."
+#~ msgstr "คุณยังไม่ได้ต่อกับ Internet อยู่"
+
+#~ msgid ""
+#~ "\n"
+#~ "You can disconnect or reconfigure your connection."
+#~ msgstr ""
+#~ "\n"
+#~ "คุณสามารถเลิกติดต่อหรือทำการปรับแต่งการติดต่อของคุณใหม่"
+
+#~ msgid "You are currently connected to the Internet."
+#~ msgstr "คุณติดต่อกับ Internet อยู่"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Graphics programs"
-msgstr "กราฟฟิคการ์ด: %s"
+#~ msgid "Write %s"
+#~ msgstr "XFree %s"
 
-#: ../../share/compssUsers:999
 #, fuzzy
-msgid "Set of tools to read and send mail and news and to browse the Web"
-msgstr "เครื่องมือในการอ่านและส่ง mail และ news (pine, mutt, tin..) และท่องอินเตอร์เน็ต"
+#~ msgid "Author:"
+#~ msgstr "ตรวจหาอัตโนมัติ"
+
+#, fuzzy
+#~ msgid "Audio station"
+#~ msgstr "Multimedia - เขียน CD "
+
+#, fuzzy
+#~ msgid "Video station"
+#~ msgstr "Workstation ที่ทำงาน"
+
+#, fuzzy
+#~ msgid "Graphic station"
+#~ msgstr "Workstation ที่ทำงาน"
+
+#, fuzzy
+#~ msgid "Graphics programs"
+#~ msgstr "กราฟฟิคการ์ด: %s"
 
 #, fuzzy
 #~ msgid "Printer sharing"
@@ -17334,10 +17397,6 @@ msgstr "เครื่องมือในการอ่านและส่
 #~ "หรือคุณใช้ LILO และโปรแกรมไม่ทำงาน หรือคุณไม่ได้ใช้ LILO และคุณไม่ต้องการ /boot"
 
 #, fuzzy
-#~ msgid "Upgrade"
-#~ msgstr "Update"
-
-#, fuzzy
 #~ msgid "Do you want to configure another printer?"
 #~ msgstr "คุณต้องการทดสอบการคอนฟิกหรือไม่"