updated po files

1 files changed, 217 insertions, 254 deletions

diff --git a/perl-install/share/po/sp.po b/perl-install/share/po/sp.po
index 882f9cbcf..179289368 100644
--- a/perl-install/share/po/sp.po
+++ b/perl-install/share/po/sp.po
@@ -6,7 +6,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: drakfloppy 0.43\n"
-"POT-Creation-Date: 2002-07-22 13:03+0200\n"
+"POT-Creation-Date: 2002-07-23 19:48+0200\n"
 "PO-Revision-Date: 2001-08-25 08:36GMT+1\n"
 "Last-Translator: Toma Jankovic <tomaja@net.yu>\n"
 "Language-Team: SERBIAN <office@mandrake.co.yu>\n"
@@ -303,13 +303,12 @@ msgstr "XFree86 сервер: %s"
 msgid "More"
 msgstr "Jош"
 
-#: ../../Xconfigurator.pm_.c:818 ../../harddrake/ui.pm_.c:263
-#: ../../harddrake/ui.pm_.c:289 ../../install_gtk.pm_.c:84
+#: ../../Xconfigurator.pm_.c:818 ../../install_gtk.pm_.c:84
 #: ../../install_steps_gtk.pm_.c:279 ../../interactive.pm_.c:127
 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:318
-#: ../../interactive.pm_.c:350 ../../interactive_http.pm_.c:104
-#: ../../interactive_newt.pm_.c:170 ../../interactive_stdio.pm_.c:141
-#: ../../interactive_stdio.pm_.c:142 ../../my_gtk.pm_.c:722
+#: ../../interactive.pm_.c:350 ../../interactive/http.pm_.c:104
+#: ../../interactive/newt.pm_.c:170 ../../interactive/stdio.pm_.c:141
+#: ../../interactive/stdio.pm_.c:142 ../../my_gtk.pm_.c:722
 #: ../../my_gtk.pm_.c:1055 ../../my_gtk.pm_.c:1077
 #: ../../standalone/drakbackup_.c:3592 ../../standalone/drakbackup_.c:3753
 #: ../../standalone/drakbackup_.c:3785
@@ -317,7 +316,7 @@ msgid "Ok"
 msgstr "У реду"
 
 #: ../../Xconfigurator.pm_.c:820 ../../network/netconnect.pm_.c:173
-#: ../../printerdrake.pm_.c:2469 ../../standalone/drakconnect_.c:275
+#: ../../printerdrake.pm_.c:2492 ../../standalone/drakconnect_.c:275
 #: ../../standalone/drakconnect_.c:278 ../../standalone/drakfloppy_.c:146
 msgid "Expert Mode"
 msgstr "Eксперт мод"
@@ -362,7 +361,7 @@ msgstr "Прикажи информације"
 msgid "Test again"
 msgstr "Тестирај поново"
 
-#: ../../Xconfigurator.pm_.c:1350 ../../printerdrake.pm_.c:2472
+#: ../../Xconfigurator.pm_.c:1350 ../../printerdrake.pm_.c:2495
 #: ../../standalone/logdrake_.c:225
 msgid "Quit"
 msgstr "Крај"
@@ -642,7 +641,7 @@ msgstr "Додај"
 
 #: ../../any.pm_.c:266 ../../any.pm_.c:787 ../../diskdrake/hd_gtk.pm_.c:153
 #: ../../diskdrake/removable.pm_.c:27 ../../diskdrake/smbnfs_gtk.pm_.c:88
-#: ../../interactive_http.pm_.c:153
+#: ../../interactive/http.pm_.c:153
 msgid "Done"
 msgstr "Урађено"
 
@@ -984,7 +983,7 @@ msgstr ""
 #: ../../diskdrake/smbnfs_gtk.pm_.c:87 ../../install_steps_gtk.pm_.c:410
 #: ../../install_steps_gtk.pm_.c:468 ../../install_steps_interactive.pm_.c:569
 #: ../../interactive.pm_.c:142 ../../interactive.pm_.c:318
-#: ../../interactive.pm_.c:350 ../../interactive_stdio.pm_.c:141
+#: ../../interactive.pm_.c:350 ../../interactive/stdio.pm_.c:141
 #: ../../my_gtk.pm_.c:723 ../../my_gtk.pm_.c:726 ../../my_gtk.pm_.c:1055
 #: ../../network/netconnect.pm_.c:47 ../../printerdrake.pm_.c:1584
 #: ../../standalone/drakautoinst_.c:204 ../../standalone/drakbackup_.c:3515
@@ -1429,8 +1428,8 @@ msgstr ""
 #: ../../diskdrake/hd_gtk.pm_.c:116 ../../diskdrake/interactive.pm_.c:335
 #: ../../diskdrake/interactive.pm_.c:350 ../../diskdrake/smbnfs_gtk.pm_.c:45
 #: ../../install_steps.pm_.c:75 ../../install_steps_interactive.pm_.c:67
-#: ../../install_steps_interactive.pm_.c:364 ../../interactive_http.pm_.c:119
-#: ../../interactive_http.pm_.c:120 ../../standalone/diskdrake_.c:84
+#: ../../install_steps_interactive.pm_.c:364 ../../interactive/http.pm_.c:119
+#: ../../interactive/http.pm_.c:120 ../../standalone/diskdrake_.c:84
 msgid "Error"
 msgstr "Грешка"
 
@@ -2422,64 +2421,64 @@ msgstr "Аутентификација"
 msgid "Location on the bus"
 msgstr ""
 
-#: ../../harddrake/ui.pm_.c:79
+#: ../../harddrake/ui.pm_.c:76
 #, fuzzy
 msgid "Harddrake2 version "
 msgstr "Детекција хард дискa"
 
-#: ../../harddrake/ui.pm_.c:109
+#: ../../harddrake/ui.pm_.c:106
 #, fuzzy
 msgid "Detected hardware"
 msgstr "Погледај информације о хардверу"
 
-#: ../../harddrake/ui.pm_.c:123
+#: ../../harddrake/ui.pm_.c:120
 #, fuzzy
 msgid "Informations"
 msgstr "Прикажи информације"
 
-#: ../../harddrake/ui.pm_.c:140
+#: ../../harddrake/ui.pm_.c:137
 msgid "Run config tool"
 msgstr ""
 
-#: ../../harddrake/ui.pm_.c:146
+#: ../../harddrake/ui.pm_.c:143
 #, fuzzy
 msgid "Configure module"
 msgstr "Подешавање миша"
 
-#: ../../harddrake/ui.pm_.c:158
+#: ../../harddrake/ui.pm_.c:155
 #, fuzzy
 msgid "Detection in progress"
 msgstr "Детектовано на порту %s"
 
-#: ../../harddrake/ui.pm_.c:158 ../../interactive.pm_.c:387
+#: ../../harddrake/ui.pm_.c:155 ../../interactive.pm_.c:387
 msgid "Please wait"
 msgstr "Само моменат..."
 
-#: ../../harddrake/ui.pm_.c:202
+#: ../../harddrake/ui.pm_.c:203
 msgid "primary"
 msgstr ""
 
-#: ../../harddrake/ui.pm_.c:202
+#: ../../harddrake/ui.pm_.c:203
 #, fuzzy
 msgid "secondary"
 msgstr "%d секунди"
 
-#: ../../harddrake/ui.pm_.c:239
+#: ../../harddrake/ui.pm_.c:240
 #, fuzzy, c-format
 msgid "Running \"%s\" ..."
 msgstr "Уклањам штампач \"%s\" ..."
 
-#: ../../harddrake/ui.pm_.c:259
+#: ../../harddrake/ui.pm_.c:260
 msgid "About Harddrake"
 msgstr ""
 
-#: ../../harddrake/ui.pm_.c:260
+#: ../../harddrake/ui.pm_.c:261
 msgid ""
 "This is HardDrake, a Mandrake hardware configuration tool.\n"
 "Version:"
 msgstr ""
 
-#: ../../harddrake/ui.pm_.c:261
+#: ../../harddrake/ui.pm_.c:262
 #, fuzzy
 msgid "Author:"
 msgstr "Аутоматска проба"
@@ -2526,7 +2525,7 @@ msgid ""
 "system would not work any more. If you make a serious mistake as a regular\n"
 "user, you may only lose some information, but not the entire system.\n"
 "\n"
-"First, you have to enter your real name. This is not mandatory, of course\n"
+"First, you have to enter your real name. This is not mandatory, of course -\n"
 "as you can actually enter whatever you want. DrakX will then take the first\n"
 "word you have entered in the box and will bring it over to the \"User\n"
 "name\". This is the name this particular user will use to log onto the\n"
@@ -2677,9 +2676,8 @@ msgid ""
 "Packages are sorted in groups corresponding to a particular use of your\n"
 "machine. The groups themselves are sorted into four sections:\n"
 "\n"
-" * \"Workstation\": if you plan to use your machine as a workstation, "
-"select\n"
-"one or more of the corresponding groups;\n"
+" * \"Workstation\": if you plan to use your machine as a workstation,\n"
+"select one or more of the corresponding groups;\n"
 "\n"
 " * \"Development\": if your machine is to be used for programming, choose\n"
 "the desired group(s);\n"
@@ -3033,7 +3031,7 @@ msgstr ""
 
 #: ../../help.pm_.c:256
 msgid ""
-"The Mandrake LinuxCD-ROM has a built-in rescue mode. You can access it by\n"
+"The Mandrake Linux CD-ROM has a built-in rescue mode. You can access it by\n"
 "booting from the CD-ROM, press the >>F1<< key at boot and type >>rescue<<\n"
 "at the prompt. But in case your computer cannot boot from the CD-ROM, you\n"
 "should come back to this step for help in at least two situations:\n"
@@ -3045,9 +3043,8 @@ msgid ""
 "process will rewrite the boot sector, and then you will not be able to\n"
 "start GNU/Linux!\n"
 "\n"
-" * if a problem arises and you cannot start up GNU/Linux from the hard "
-"disk,\n"
-"this floppy disk will be the only means of starting up GNU/Linux. It\n"
+" * if a problem arises and you cannot start up GNU/Linux from the hard\n"
+"disk, this floppy disk will be the only means of starting up GNU/Linux. It\n"
 "contains a fair number of system tools for restoring a system, which has\n"
 "crashed due to a power failure, an unfortunate typing error, a typo in a\n"
 "password, or any other reason.\n"
@@ -3087,6 +3084,7 @@ msgstr ""
 "целу дискету."
 
 #: ../../help.pm_.c:280
+#, fuzzy
 msgid ""
 "At this point, you need to choose where you want to install the Mandrake\n"
 "Linux operating system on your hard drive. If your hard drive is empty or\n"
@@ -3121,21 +3119,20 @@ msgid ""
 "Linux partitions on your hard drive. If you want to use them, choose this\n"
 "option;\n"
 "\n"
-" * \"Use the free space on the Windows; partition\": if MicrosoftWindows is\n"
-"installed on your hard drive and takes all the space available on it, you\n"
-"have to create free space for Linux data. To do so, you can delete your\n"
-"MicrosoftWindows partition and data (see ``Erase entire disk'' or ``Expert\n"
-"mode'' solutions) or resize your MicrosoftWindows partition. Resizing can\n"
+" * \"Use the free space on the Windows; partition\": if Microsoft Windows\n"
+"is installed on your hard drive and takes all the space available on it,\n"
+"you have to create free space for Linux data. To do so, you can delete your\n"
+"Microsoft Windows partition and data (see ``Erase entire disk'' or ``Expert\n"
+"mode'' solutions) or resize your Microsoft Windows partition. Resizing can\n"
 "be performed without the loss of any data, provided you previously\n"
 "defragment the Windows partition. Backing up your data won't hurt either..\n"
 "This solution is recommended if you want to use both Mandrake Linux and\n"
-"MicrosoftWindows on the same computer.\n"
+"Microsoft Windows on the same computer.\n"
 "\n"
-"   Before choosing this option, please understand that after this "
-"procedure,\n"
-"the size of your MicrosoftWindows partition will be smaller than at the\n"
-"present time. You will have less free space under MicrosoftWindows to store\n"
-"your data or to install new software;\n"
+"   Before choosing this option, please understand that after this\n"
+"procedure, the size of your Microsoft Windows partition will be smaller\n"
+"than at the present time. You will have less free space under Microsoft\n"
+"Windows to store your data or to install new software;\n"
 "\n"
 " * \"Erase entire disk\": if you want to delete all data and all partitions\n"
 "present on your hard drive and replace them with your new Mandrake Linux\n"
@@ -3151,9 +3148,9 @@ msgid ""
 "   !! If you choose this option, all data on your disk will be lost. !!\n"
 "\n"
 " * \"Expert mode\": choose this option if you want to manually partition\n"
-"your hard drive. Be careful it is a powerful but dangerous choice. You can\n"
-"very easily lose all your data. Hence, do not choose this unless you know\n"
-"what you are doing."
+"your hard drive. Be careful - it is a powerful but dangerous choice. You\n"
+"can very easily lose all your data. Hence, do not choose this unless you\n"
+"know what you are doing."
 msgstr ""
 "У овом тренутку, морате да изаберете где ћете инсталирати\n"
 "Mandrake Linux оперативни систем на вaш хард диск. Уколико jе празан или\n"
@@ -3240,9 +3237,8 @@ msgid ""
 "    * \"Replay\". This is a partially automated installation as the\n"
 "partitioning step (and only this one) remains interactive;\n"
 "\n"
-"    * \"Automated\". Fully automated installation: the hard disk is "
-"completely\n"
-"rewritten, all data is lost.\n"
+"    * \"Automated\". Fully automated installation: the hard disk is\n"
+"completely rewritten, all data is lost.\n"
 "\n"
 "   This feature is very handy when installing a great number of similar\n"
 "machines. See the Auto install section on our web site;\n"
@@ -3441,38 +3437,32 @@ msgid ""
 "\n"
 " * \"More\": gives access to additional features:\n"
 "\n"
-"    * \"Save partition table\": saves the partition table to a floppy. "
-"Useful\n"
-"for later partition-table recovery if necessary. It is strongly recommended\n"
-"to perform this step;\n"
+"    * \"Save partition table\": saves the partition table to a floppy.\n"
+"Useful for later partition-table recovery if necessary. It is strongly\n"
+"recommended to perform this step;\n"
 "\n"
 "    * \"Restore partition table\": allows to restore a previously saved\n"
 "partition table from floppy disk;\n"
 "\n"
-"    * \"Rescue partition table\": if your partition table is damaged, you "
-"can\n"
-"try to recover it using this option. Please be careful and remember that it\n"
-"can fail;\n"
+"    * \"Rescue partition table\": if your partition table is damaged, you\n"
+"can try to recover it using this option. Please be careful and remember\n"
+"that it can fail;\n"
 "\n"
-"    * \"Reload partition table\": discards all changes and loads your "
-"initial\n"
-"partition table;\n"
+"    * \"Reload partition table\": discards all changes and loads your\n"
+"initial partition table;\n"
 "\n"
-"    * \"Removable media automounting\": unchecking this option will force "
-"users\n"
-"to manually mount and unmount removable medias such as floppies and\n"
+"    * \"Removable media automounting\": unchecking this option will force\n"
+"users to manually mount and unmount removable medias such as floppies and\n"
 "CD-ROMs.\n"
 "\n"
-" * \"Wizard\": use this option if you wish to use a wizard to partition "
-"your\n"
-"hard drive. This is recommended if you do not have a good knowledge of\n"
+" * \"Wizard\": use this option if you wish to use a wizard to partition\n"
+"your hard drive. This is recommended if you do not have a good knowledge of\n"
 "partitioning;\n"
 "\n"
 " * \"Undo\": use this option to cancel your changes;\n"
 "\n"
-" * \"Toggle to normal/expert mode\": allows additional actions on "
-"partitions\n"
-"(type, options, format) and gives more information;\n"
+" * \"Toggle to normal/expert mode\": allows additional actions on\n"
+"partitions (type, options, format) and gives more information;\n"
 "\n"
 " * \"Done\": when you are finished partitioning your hard drive, this will\n"
 "save your changes back to disk.\n"
@@ -3640,11 +3630,11 @@ msgid ""
 "what currently holds your machine, you will be able to keep some old (Linux\n"
 "or other) partitions unchanged;\n"
 "\n"
-" * \"Upgrade\": this installation class allows to simply update the "
-"packages\n"
-"currently installed on your Mandrake Linux system. It keeps the current\n"
-"partitions of your hard drives as well as user configurations. All other\n"
-"configuration steps remain available with respect to plain installation;\n"
+" * \"Upgrade\": this installation class allows to simply update the\n"
+"packages currently installed on your Mandrake Linux system. It keeps the\n"
+"current partitions of your hard drives as well as user configurations. All\n"
+"other configuration steps remain available with respect to plain\n"
+"installation;\n"
 "\n"
 " * \"Upgrade Packages Only\": this brand new class allows to upgrade an\n"
 "existing Mandrake Linux system while keeping all system configurations\n"
@@ -3707,7 +3697,7 @@ msgstr ""
 "GNU/Linux-у. Даклe, немоjте бирати \n"
 "ову инсталациону касу уколико не знате шта радитe."
 
-#: ../../help.pm_.c:583
+#: ../../help.pm_.c:584
 msgid ""
 "Normally, DrakX selects the right keyboard for you (depending on the\n"
 "language you have chosen) and you won't even see this step. However, you\n"
@@ -3733,7 +3723,7 @@ msgstr ""
 "Кликните на тастер \"Још\" да би добили комплетну листу\n"
 "подржаних тастатура."
 
-#: ../../help.pm_.c:596
+#: ../../help.pm_.c:597
 msgid ""
 "Please choose your preferred language for installation and system usage.\n"
 "\n"
@@ -3762,7 +3752,7 @@ msgstr ""
 "Запамтите да можете инсталирати више језика. Када изаберете све жељене\n"
 "додатне локализације кликните на тастер \"У реду\" да би наставили."
 
-#: ../../help.pm_.c:609
+#: ../../help.pm_.c:610
 #, fuzzy
 msgid ""
 "DrakX generally detects the number of buttons your mouse has. If not, it\n"
@@ -3791,7 +3781,7 @@ msgstr ""
 "bar) или\n"
 "тастер RETURN за \"Поништи\" и изаберите поново."
 
-#: ../../help.pm_.c:623
+#: ../../help.pm_.c:624
 msgid ""
 "Please select the correct port. For example, the \"COM1\" port under\n"
 "Windows is named \"ttyS0\" under GNU/Linux."
@@ -3799,23 +3789,24 @@ msgstr ""
 "Молим, изаберите одговарајући порт. На пример, COM1 порт под MS Windows-ом\n"
 " у Linux-у има ознаку ttyS0."
 
-#: ../../help.pm_.c:627
+#: ../../help.pm_.c:628
+#, fuzzy
 msgid ""
 "This is the most crucial decision point for the security of your GNU/Linux\n"
 "system: you have to enter the \"root\" password. \"root\" is the system\n"
 "administrator and is the only one authorized to make updates, add users,\n"
 "change the overall system configuration, and so on. In short, \"root\" can\n"
 "do everything! That is why you must choose a password that is difficult to\n"
-"guess DrakX will tell you if it is too easy. As you can see, you can choose\n"
-"not to enter a password, but we strongly advise you against this if only\n"
-"for one reason: do not think that because you booted GNU/Linux that your\n"
-"other operating systems are safe from mistakes. Since \"root\" can overcome\n"
-"all limitations and unintentionally erase all data on partitions by\n"
-"carelessly accessing the partitions themselves, it is important for it to\n"
-"be difficult to become \"root\".\n"
+"guess - DrakX will tell you if it is too easy. As you can see, you can\n"
+"choose not to enter a password, but we strongly advise you against this if\n"
+"only for one reason: do not think that because you booted GNU/Linux that\n"
+"your other operating systems are safe from mistakes. Since \"root\" can\n"
+"overcome all limitations and unintentionally erase all data on partitions\n"
+"by carelessly accessing the partitions themselves, it is important for it\n"
+"to be difficult to become \"root\".\n"
 "\n"
 "The password should be a mixture of alphanumeric characters and at least 8\n"
-"characters long. Never write down the \"root\" password it makes it too\n"
+"characters long. Never write down the \"root\" password - it makes it too\n"
 "easy to compromise a system.\n"
 "\n"
 "However, please do not make the password too long or complicated because\n"
@@ -3873,7 +3864,7 @@ msgstr ""
 "If your computer is not connected to any administrated network, you will\n"
 "want to choose \"Local files\" for authentication."
 
-#: ../../help.pm_.c:663
+#: ../../help.pm_.c:664
 #, fuzzy
 msgid ""
 "LILO and grub are GNU/Linux bootloaders. This stage, normally, is totally\n"
@@ -3896,7 +3887,7 @@ msgid ""
 "    * \"LILO with graphical menu\": if you prefer LILO with its graphical\n"
 "interface.\n"
 "\n"
-"    * \"LILO with text menu\": if you prefer LILO with its text menu "
+"    * \"LILO with text menu\": if you prefer LILO with its text menu\n"
 "interface.\n"
 "\n"
 " * \"Boot device\": in most cases, you will not change the default\n"
@@ -3904,7 +3895,7 @@ msgid ""
 "second hard drive (\"/dev/hdb\"), or even on a floppy disk (\"/dev/fd0\");\n"
 "\n"
 " * \"Delay before booting the default image\": when rebooting the computer,\n"
-"this is the delay granted to the user to choose in the bootloader menu,\n"
+"this is the delay granted to the user to choose - in the bootloader menu,\n"
 "another boot entry than the default one.\n"
 "\n"
 "!! Beware that if you choose not to install a bootloader (by selecting\n"
@@ -3973,7 +3964,7 @@ msgstr ""
 "its parameters or remove it; \"Add\" creates a new entry; and \"Done\" goes\n"
 "on to the next installation step."
 
-#: ../../help.pm_.c:711
+#: ../../help.pm_.c:713
 #, fuzzy
 msgid ""
 "LILO (the LInux LOader) and grub are bootloaders: they are able to boot\n"
@@ -3998,7 +3989,7 @@ msgstr ""
 "У том случаjу, треба да избришете одговараjућe линиje за те системe. Али\n"
 "ондa морате имати boot дискету да би их ви могли покренути!"
 
-#: ../../help.pm_.c:722
+#: ../../help.pm_.c:724
 msgid ""
 "You must indicate where you wish to place the information required to boot\n"
 "to GNU/Linux.\n"
@@ -4012,29 +4003,29 @@ msgstr ""
 "Уколико незнате тачно шта радите,изаберите \"Први сектор\n"
 "диска (MBR)\"."
 
-#: ../../help.pm_.c:729
+#: ../../help.pm_.c:731
+#, fuzzy
 msgid ""
 "Here, we select a printing system for your computer. Other OSs may offer\n"
 "you one, but Mandrake Linux offers three.\n"
 "\n"
-" * \"pdq\" which means ``print, don't queue'', is the choice if you have a\n"
-"direct connection to your printer and you want to be able to panic out of\n"
+" * \"pdq\" - which means ``print, don't queue'', is the choice if you have\n"
+"a direct connection to your printer and you want to be able to panic out of\n"
 "printer jams, and you do not have networked printers. It will handle only\n"
 "very simple network cases and is somewhat slow for networks. Pick \"pdq\"\n"
 "if this is your maiden voyage to GNU/Linux. You can change your choices\n"
 "after installation by running PrinterDrake from the Mandrake Control Center\n"
 "and clicking the expert button.\n"
 "\n"
-" * \"CUPS\"``Common Unix Printing System'', is excellent at printing to "
-"your\n"
-"local printer and also halfway-around the planet. It is simple and can act\n"
-"as a server or a client for the ancient \"lpd\" printing system. Hence, it\n"
-"is compatible with the systems that went before. It can do many tricks, but\n"
-"the basic setup is almost as easy as \"pdq\". If you need this to emulate\n"
-"an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
+" * \"CUPS\" - ``Common Unix Printing System'', is excellent at printing to\n"
+"your local printer and also halfway-around the planet. It is simple and can\n"
+"act as a server or a client for the ancient \"lpd\" printing system. Hence,\n"
+"it is compatible with the systems that went before. It can do many tricks,\n"
+"but the basic setup is almost as easy as \"pdq\". If you need this to\n"
+"emulate an \"lpd\" server, you must turn on the \"cups-lpd\" daemon. It has\n"
 "graphical front-ends for printing or choosing printer options.\n"
 "\n"
-" * \"lprNG\"``line printer daemon New Generation''. This system can do\n"
+" * \"lprNG\" - ``line printer daemon New Generation''. This system can do\n"
 "approximately the same things the others can do, but it will print to\n"
 "printers mounted on a Novell Network, because it supports the IPX protocol,\n"
 "and it can print directly to shell commands. If you have need of Novell or\n"
@@ -4070,7 +4061,8 @@ msgstr ""
 "Otherwise, CUPS is preferable as it is simpler and better at working over\n"
 "networks."
 
-#: ../../help.pm_.c:757
+#: ../../help.pm_.c:759
+#, fuzzy
 msgid ""
 "DrakX now detects any IDE device present in your computer. It will also\n"
 "scan for one or more PCI SCSI card(s) on your system. If a SCSI card is\n"
@@ -4095,7 +4087,7 @@ msgid ""
 "``User Guide'' (chapter 3, in the ``Collecting Information on Your\n"
 "Hardware'' section) for hints on retrieving the parameters required from\n"
 "hardware documentation, from the manufacturer's web site (if you have\n"
-"Internet access) or from MicrosoftWindows (if you used this hardware with\n"
+"Internet access) or from Microsoft Windows (if you used this hardware with\n"
 "Windows on your system)."
 msgstr ""
 "DrakX сада треба да детектује IDE уређаје присутне у вешем рачунару.DrakX ће "
@@ -4127,7 +4119,8 @@ msgstr ""
 "докуменатциjу о хардверу, или са произвођaчевог \n"
 "веб саjтa (уколико имате приступ интернету)."
 
-#: ../../help.pm_.c:784
+#: ../../help.pm_.c:786
+#, fuzzy
 msgid ""
 "You can add additional entries for yaboot, either for other operating\n"
 "systems, alternate kernels, or for an emergency boot image.\n"
@@ -4137,9 +4130,8 @@ msgid ""
 "\n"
 "For Linux, there are a few possible options:\n"
 "\n"
-" * Label: this is simply the name you will have to type at the yaboot "
-"prompt\n"
-"to select this boot option;\n"
+" * Label: this is simply the name you will have to type at the yaboot\n"
+"prompt to select this boot option;\n"
 "\n"
 " * Image: this would be the name of the kernel to boot. Typically, vmlinux\n"
 "or a variation of vmlinux with an extension;\n"
@@ -4151,7 +4143,7 @@ msgid ""
 "button emulation for the often lacking 2nd and 3rd mouse buttons on a stock\n"
 "Apple mouse. The following are some examples:\n"
 "\n"
-"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111 "
+"         video=aty128fb:vmode:17,cmode:32,mclk:71 adb_buttons=103,111\n"
 "hda=autotune\n"
 "\n"
 "         video=atyfb:vmode:12,cmode:24 adb_buttons=103,111\n"
@@ -4229,7 +4221,8 @@ msgstr ""
 "ознaчен сa \"*\", уколико\n"
 "притиснетe TAB да би видели стартну селекциjу."
 
-#: ../../help.pm_.c:830
+#: ../../help.pm_.c:833
+#, fuzzy
 msgid ""
 "Yaboot is a bootloader for NewWorld MacIntosh hardware. It is able to boot\n"
 "either GNU/Linux, MacOS or MacOSX if present on your computer. Normally,\n"
@@ -4256,9 +4249,8 @@ msgid ""
 " * Enable CD Boot?: checking this option allows you to choose ``C'' for CD\n"
 "at the first boot prompt;\n"
 "\n"
-" * Enable OF Boot?: checking this option allows you to choose ``N'' for "
-"Open\n"
-"Firmware at the first boot prompt;\n"
+" * Enable OF Boot?: checking this option allows you to choose ``N'' for\n"
+"Open Firmware at the first boot prompt;\n"
 "\n"
 " * Default OS: you can select which OS will boot by default when the Open\n"
 "Firmware Delay expires."
@@ -4301,10 +4293,11 @@ msgstr ""
 "као default када Open Firmware \n"
 "пауза заврши."
 
-#: ../../help.pm_.c:862
+#: ../../help.pm_.c:865
+#, fuzzy
 msgid ""
 "Here are presented various parameters concerning your machine. Depending on\n"
-"your installed hardware, you may or not, see the following entries:\n"
+"your installed hardware, you may - or not, see the following entries:\n"
 "\n"
 " * \"Mouse\": check the current mouse configuration and click on the button\n"
 "to change it if necessary;\n"
@@ -4312,12 +4305,11 @@ msgid ""
 " * \"Keyboard\": check the current keyboard map configuration and click on\n"
 "the button to change that if necessary;\n"
 "\n"
-" * \"Timezone\": DrakX, by default, guesses your time zone from the "
-"language\n"
-"you have chosen. But here again, as for the choice of a keyboard, you may\n"
-"not be in the country for which the chosen language should correspond.\n"
-"Hence, you may need to click on the \"Timezone\" button in order to\n"
-"configure the clock according to the time zone you are in;\n"
+" * \"Timezone\": DrakX, by default, guesses your time zone from the\n"
+"language you have chosen. But here again, as for the choice of a keyboard,\n"
+"you may not be in the country for which the chosen language should\n"
+"correspond. Hence, you may need to click on the \"Timezone\" button in\n"
+"order to configure the clock according to the time zone you are in;\n"
 "\n"
 " * \"Printer\": clicking on the \"No Printer\" button will open the printer\n"
 "configuration wizard;\n"
@@ -4362,7 +4354,7 @@ msgstr ""
 "приказана овде. Можете кликнути на тестер да би променили параметре\n"
 "који су везани за њу."
 
-#: ../../help.pm_.c:891
+#: ../../help.pm_.c:894
 msgid ""
 "Choose the hard drive you want to erase in order to install your new\n"
 "Mandrake Linux partition. Be careful, all data present on it will be lost\n"
@@ -4373,7 +4365,7 @@ msgstr ""
 "партициjу. Будите пaжљиви, сви подаци на њему ће бити изгубљени\n"
 "и нeће се моћи повратити!"
 
-#: ../../help.pm_.c:896
+#: ../../help.pm_.c:899
 msgid ""
 "Click on \"OK\" if you want to delete all data and partitions present on\n"
 "this hard drive. Be careful, after clicking on \"OK\", you will not be able\n"
@@ -5636,8 +5628,8 @@ msgstr "Миш"
 msgid "Timezone"
 msgstr "Временска зонa"
 
-#: ../../install_steps_interactive.pm_.c:1031 ../../printerdrake.pm_.c:2275
-#: ../../printerdrake.pm_.c:2353
+#: ../../install_steps_interactive.pm_.c:1031 ../../printerdrake.pm_.c:2298
+#: ../../printerdrake.pm_.c:2376
 msgid "Printer"
 msgstr "Штампач"
 
@@ -6001,16 +5993,16 @@ msgstr "Напредно"
 msgid "Basic"
 msgstr "Основно"
 
-#: ../../interactive_stdio.pm_.c:29 ../../interactive_stdio.pm_.c:147
+#: ../../interactive/stdio.pm_.c:29 ../../interactive/stdio.pm_.c:147
 msgid "Bad choice, try again\n"
 msgstr "Лош избор, пробајте поново\n"
 
-#: ../../interactive_stdio.pm_.c:30 ../../interactive_stdio.pm_.c:148
+#: ../../interactive/stdio.pm_.c:30 ../../interactive/stdio.pm_.c:148
 #, c-format
 msgid "Your choice? (default %s) "
 msgstr "Ваш избор ? (по default-у %s) "
 
-#: ../../interactive_stdio.pm_.c:52
+#: ../../interactive/stdio.pm_.c:52
 #, c-format
 msgid ""
 "Entries you'll have to fill:\n"
@@ -6019,35 +6011,35 @@ msgstr ""
 "Уноси које треба да попуните:\n"
 "%s"
 
-#: ../../interactive_stdio.pm_.c:68
+#: ../../interactive/stdio.pm_.c:68
 #, c-format
 msgid "Your choice? (0/1, default `%s') "
 msgstr "Ваш избор? (0/1, default `%s') "
 
-#: ../../interactive_stdio.pm_.c:93
+#: ../../interactive/stdio.pm_.c:93
 #, c-format
 msgid "Button `%s': %s"
 msgstr "Тастер `%s': %s"
 
-#: ../../interactive_stdio.pm_.c:94
+#: ../../interactive/stdio.pm_.c:94
 msgid "Do you want to click on this button?"
 msgstr "Да ли желите да кликнете на овај тастер? "
 
-#: ../../interactive_stdio.pm_.c:103
+#: ../../interactive/stdio.pm_.c:103
 msgid " enter `void' for void entry"
 msgstr ""
 
-#: ../../interactive_stdio.pm_.c:103
+#: ../../interactive/stdio.pm_.c:103
 #, c-format
 msgid "Your choice? (default `%s'%s) "
 msgstr "Ваш избор? (default `%s'%s) "
 
-#: ../../interactive_stdio.pm_.c:121
+#: ../../interactive/stdio.pm_.c:121
 #, c-format
 msgid "=> There are many things to choose from (%s).\n"
 msgstr "=> Постоји много ствари за избор из (%s).\n"
 
-#: ../../interactive_stdio.pm_.c:124
+#: ../../interactive/stdio.pm_.c:124
 msgid ""
 "Please choose the first number of the 10-range you wish to edit,\n"
 "or just hit Enter to proceed.\n"
@@ -6057,7 +6049,7 @@ msgstr ""
 "или само кликните на Enter да би наставили.\n"
 "Ваш избор? "
 
-#: ../../interactive_stdio.pm_.c:137
+#: ../../interactive/stdio.pm_.c:137
 #, c-format
 msgid ""
 "=> Notice, a label changed:\n"
@@ -6066,7 +6058,7 @@ msgstr ""
 "=> Напомена, промењено име:\n"
 "%s"
 
-#: ../../interactive_stdio.pm_.c:144
+#: ../../interactive/stdio.pm_.c:144
 msgid "Re-submit"
 msgstr "Re-submit"
 
@@ -7314,7 +7306,7 @@ msgstr "Лоше backup-ованa датотекa"
 msgid "Error writing to file %s"
 msgstr "Грешка код уноса у датотекa %s"
 
-#: ../../partition_table_raw.pm_.c:186
+#: ../../partition_table/raw.pm_.c:186
 msgid ""
 "Something bad is happening on your drive. \n"
 "A test to check the integrity of data has failed. \n"
@@ -7360,7 +7352,7 @@ msgstr "LPD - Line Printer Демон"
 msgid "PDQ - Print, Don't Queue"
 msgstr "PDQ - Штампај, немој да памтиш"
 
-#: ../../printer.pm_.c:32 ../../printer.pm_.c:846
+#: ../../printer.pm_.c:32 ../../printer.pm_.c:871
 msgid "CUPS"
 msgstr "CUPS"
 
@@ -7412,98 +7404,98 @@ msgstr "Унесите URI за штампач"
 msgid "Pipe job into a command"
 msgstr "Убаци наредбу у команду"
 
-#: ../../printer.pm_.c:479 ../../printer.pm_.c:670 ../../printer.pm_.c:992
-#: ../../printerdrake.pm_.c:1663 ../../printerdrake.pm_.c:2728
+#: ../../printer.pm_.c:504 ../../printer.pm_.c:695 ../../printer.pm_.c:1017
+#: ../../printerdrake.pm_.c:1663 ../../printerdrake.pm_.c:2752
 msgid "Unknown model"
 msgstr "Непознати модел"
 
-#: ../../printer.pm_.c:507
+#: ../../printer.pm_.c:532
 msgid "Local Printers"
 msgstr "Локални штампачи"
 
-#: ../../printer.pm_.c:509 ../../printer.pm_.c:847
+#: ../../printer.pm_.c:534 ../../printer.pm_.c:872
 msgid "Remote Printers"
 msgstr "Удаљени штампaчи"
 
-#: ../../printer.pm_.c:516 ../../printerdrake.pm_.c:244
+#: ../../printer.pm_.c:541 ../../printerdrake.pm_.c:244
 #, c-format
 msgid " on parallel port \\/*%s"
 msgstr " на парелелном порту \\/*%s"
 
-#: ../../printer.pm_.c:519 ../../printerdrake.pm_.c:246
+#: ../../printer.pm_.c:544 ../../printerdrake.pm_.c:246
 #, c-format
 msgid ", USB printer \\/*%s"
 msgstr ", USB штампач \\/*%s"
 
-#: ../../printer.pm_.c:524
+#: ../../printer.pm_.c:549
 #, c-format
 msgid ", multi-function device on parallel port \\/*%s"
 msgstr ", мулти-функционални уређај на паралелном порту \\/*%s"
 
-#: ../../printer.pm_.c:527
+#: ../../printer.pm_.c:552
 msgid ", multi-function device on USB"
 msgstr ", мулти-функционални уређај на USB"
 
-#: ../../printer.pm_.c:529
+#: ../../printer.pm_.c:554
 msgid ", multi-function device on HP JetDirect"
 msgstr ", мулти-фуункционални уређај на HP JetDirect"
 
-#: ../../printer.pm_.c:531
+#: ../../printer.pm_.c:556
 msgid ", multi-function device"
 msgstr ", мулти-функционални уређај"
 
-#: ../../printer.pm_.c:534
+#: ../../printer.pm_.c:559
 #, c-format
 msgid ", printing to %s"
 msgstr ", штампај на %s"
 
-#: ../../printer.pm_.c:536
+#: ../../printer.pm_.c:561
 #, c-format
 msgid "on LPD server \"%s\", printer \"%s\""
 msgstr "на LPD серверr \"%s\", штампач \"%s\""
 
-#: ../../printer.pm_.c:538
+#: ../../printer.pm_.c:563
 #, c-format
 msgid ", TCP/IP host \"%s\", port %s"
 msgstr ", TCP/IP хост \"%s\", порт %s"
 
-#: ../../printer.pm_.c:542
+#: ../../printer.pm_.c:567
 #, c-format
 msgid "on Windows server \"%s\", share \"%s\""
 msgstr "на Windows сервер \"%s\", share \"%s\""
 
-#: ../../printer.pm_.c:546
+#: ../../printer.pm_.c:571
 #, c-format
 msgid "on Novell server \"%s\", printer \"%s\""
 msgstr "на Novell сервер \"%s\", штампач \"%s\""
 
-#: ../../printer.pm_.c:548
+#: ../../printer.pm_.c:573
 #, c-format
 msgid ", using command %s"
 msgstr ", користим команду %s"
 
-#: ../../printer.pm_.c:667 ../../printerdrake.pm_.c:1134
+#: ../../printer.pm_.c:692 ../../printerdrake.pm_.c:1134
 msgid "Raw printer (No driver)"
 msgstr "Raw штампач (без драјвера)"
 
-#: ../../printer.pm_.c:816
+#: ../../printer.pm_.c:841
 #, c-format
 msgid "(on %s)"
 msgstr "(на %s)"
 
-#: ../../printer.pm_.c:818
+#: ../../printer.pm_.c:843
 msgid "(on this machine)"
 msgstr "(на овој машини)"
 
-#: ../../printer.pm_.c:843
+#: ../../printer.pm_.c:868
 #, c-format
 msgid "On CUPS server \"%s\""
 msgstr "На CUPS сервер \"%s\""
 
-#: ../../printer.pm_.c:849 ../../printerdrake.pm_.c:2390
-#: ../../printerdrake.pm_.c:2401 ../../printerdrake.pm_.c:2616
-#: ../../printerdrake.pm_.c:2668 ../../printerdrake.pm_.c:2695
-#: ../../printerdrake.pm_.c:2865 ../../printerdrake.pm_.c:2867
+#: ../../printer.pm_.c:874 ../../printerdrake.pm_.c:2413
+#: ../../printerdrake.pm_.c:2424 ../../printerdrake.pm_.c:2640
+#: ../../printerdrake.pm_.c:2692 ../../printerdrake.pm_.c:2719
+#: ../../printerdrake.pm_.c:2889 ../../printerdrake.pm_.c:2891
 msgid " (Default)"
 msgstr " (Подразумевано)"
 
@@ -7525,11 +7517,11 @@ msgstr ""
 "Штампаче на удаљеном CUPS серверу немате да би их овде подесили; ови "
 "штампачи ће бити аутоматски детектовани."
 
-#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2453
+#: ../../printerdrake.pm_.c:69 ../../printerdrake.pm_.c:2476
 msgid "CUPS configuration"
 msgstr "CUPS конфигурација"
 
-#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2454
+#: ../../printerdrake.pm_.c:70 ../../printerdrake.pm_.c:2477
 msgid "Specify CUPS server"
 msgstr "Одредите CUPS сервер"
 
@@ -7591,8 +7583,8 @@ msgstr "Аутоматска CUPS конфигурација"
 msgid "Test ports"
 msgstr "Тестирање портова"
 
-#: ../../printerdrake.pm_.c:163 ../../printerdrake.pm_.c:2436
-#: ../../printerdrake.pm_.c:2555
+#: ../../printerdrake.pm_.c:163 ../../printerdrake.pm_.c:2459
+#: ../../printerdrake.pm_.c:2579
 msgid "Add a new printer"
 msgstr "Додајте нови штампач"
 
@@ -8321,7 +8313,7 @@ msgstr ""
 msgid "Did it work properly?"
 msgstr "Да ли ради исправно?"
 
-#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2730
+#: ../../printerdrake.pm_.c:1665 ../../printerdrake.pm_.c:2754
 msgid "Raw printer"
 msgstr "Raw штампач"
 
@@ -8449,7 +8441,7 @@ msgstr ""
 
 #: ../../printerdrake.pm_.c:1736 ../../printerdrake.pm_.c:1742
 #: ../../printerdrake.pm_.c:1743 ../../printerdrake.pm_.c:1744
-#: ../../printerdrake.pm_.c:2714 ../../standalone/drakTermServ_.c:235
+#: ../../printerdrake.pm_.c:2738 ../../standalone/drakTermServ_.c:235
 #: ../../standalone/drakbackup_.c:895 ../../standalone/drakbackup_.c:3943
 #: ../../standalone/drakbug_.c:106 ../../standalone/drakfont_.c:706
 #: ../../standalone/drakfont_.c:1015
@@ -8515,8 +8507,8 @@ msgstr ""
 "\n"
 "Не користи \"scannerdrake\" за овај уређај!"
 
-#: ../../printerdrake.pm_.c:1793 ../../printerdrake.pm_.c:2220
-#: ../../printerdrake.pm_.c:2484
+#: ../../printerdrake.pm_.c:1793 ../../printerdrake.pm_.c:2243
+#: ../../printerdrake.pm_.c:2507
 msgid "Reading printer data..."
 msgstr "Учитавам податке за штампач ..."
 
@@ -8766,64 +8758,64 @@ msgstr ""
 "\n"
 "Да ли поново желите да аутоматски стартујете систем за штампање ?"
 
-#: ../../printerdrake.pm_.c:2074 ../../printerdrake.pm_.c:2112
-#: ../../printerdrake.pm_.c:2142 ../../printerdrake.pm_.c:2175
-#: ../../printerdrake.pm_.c:2280
+#: ../../printerdrake.pm_.c:2074 ../../printerdrake.pm_.c:2114
+#: ../../printerdrake.pm_.c:2151 ../../printerdrake.pm_.c:2191
+#: ../../printerdrake.pm_.c:2303
 msgid "Checking installed software..."
 msgstr "Проверавам инсталирани софтвер..."
 
-#: ../../printerdrake.pm_.c:2116
+#: ../../printerdrake.pm_.c:2118
 msgid "Removing LPRng..."
 msgstr "Уклањам LPRng..."
 
-#: ../../printerdrake.pm_.c:2146
+#: ../../printerdrake.pm_.c:2155
 msgid "Removing LPD..."
 msgstr "Уклањам LPD..."
 
-#: ../../printerdrake.pm_.c:2204
+#: ../../printerdrake.pm_.c:2227
 msgid "Select Printer Spooler"
 msgstr "Изаберите Spooler за штампач"
 
-#: ../../printerdrake.pm_.c:2205
+#: ../../printerdrake.pm_.c:2228
 msgid "Which printing system (spooler) do you want to use?"
 msgstr "Који систем за штампaње (spooler) желите да користитe ?"
 
-#: ../../printerdrake.pm_.c:2238
+#: ../../printerdrake.pm_.c:2261
 #, fuzzy, c-format
 msgid "Configuring printer \"%s\"..."
 msgstr "Подешавам штампач \"%s\" ..."
 
-#: ../../printerdrake.pm_.c:2251
+#: ../../printerdrake.pm_.c:2274
 msgid "Installing Foomatic..."
 msgstr "Инсталирам Foomatic ..."
 
-#: ../../printerdrake.pm_.c:2308 ../../printerdrake.pm_.c:2347
-#: ../../printerdrake.pm_.c:2731 ../../printerdrake.pm_.c:2801
+#: ../../printerdrake.pm_.c:2331 ../../printerdrake.pm_.c:2370
+#: ../../printerdrake.pm_.c:2755 ../../printerdrake.pm_.c:2825
 msgid "Printer options"
 msgstr "Опције штампача"
 
-#: ../../printerdrake.pm_.c:2317
+#: ../../printerdrake.pm_.c:2340
 msgid "Preparing PrinterDrake..."
 msgstr "Припремам PrinterDrake ..."
 
-#: ../../printerdrake.pm_.c:2334 ../../printerdrake.pm_.c:2888
+#: ../../printerdrake.pm_.c:2357 ../../printerdrake.pm_.c:2912
 #, fuzzy
 msgid "Configuring applications..."
 msgstr "Подешавам штампач \"%s\" ..."
 
-#: ../../printerdrake.pm_.c:2354
+#: ../../printerdrake.pm_.c:2377
 msgid "Would you like to configure printing?"
 msgstr "Да ли бисте да подесите штампач?"
 
-#: ../../printerdrake.pm_.c:2366
+#: ../../printerdrake.pm_.c:2389
 msgid "Printing system: "
 msgstr "Систем за штампање: "
 
-#: ../../printerdrake.pm_.c:2414
+#: ../../printerdrake.pm_.c:2437
 msgid "Printerdrake"
 msgstr "Printerdrake"
 
-#: ../../printerdrake.pm_.c:2418
+#: ../../printerdrake.pm_.c:2441
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
 "its settings; to make it the default printer; to view information about it; "
@@ -8835,7 +8827,7 @@ msgstr ""
 "њему; или да би омогућили штампач на удаљеном CUPS серверу доступним за Star/"
 "Open Office."
 
-#: ../../printerdrake.pm_.c:2419
+#: ../../printerdrake.pm_.c:2442
 msgid ""
 "The following printers are configured. Double-click on a printer to change "
 "its settings; to make it the default printer; or to view information about "
@@ -8845,29 +8837,29 @@ msgstr ""
 "to change its settings; to make it the default printer; or to view "
 "information about it."
 
-#: ../../printerdrake.pm_.c:2445
+#: ../../printerdrake.pm_.c:2468
 msgid "Refresh printer list (to display all available remote CUPS printers)"
 msgstr ""
 "Освежи листу штампача (да би приказао све доступне удаљене CUPS штампаче)"
 
-#: ../../printerdrake.pm_.c:2463
+#: ../../printerdrake.pm_.c:2486
 msgid "Change the printing system"
 msgstr "Промените систем за штампање"
 
-#: ../../printerdrake.pm_.c:2468 ../../standalone/drakconnect_.c:278
+#: ../../printerdrake.pm_.c:2491 ../../standalone/drakconnect_.c:278
 msgid "Normal Mode"
 msgstr "Нормални Мод"
 
-#: ../../printerdrake.pm_.c:2623 ../../printerdrake.pm_.c:2673
-#: ../../printerdrake.pm_.c:2882
+#: ../../printerdrake.pm_.c:2647 ../../printerdrake.pm_.c:2697
+#: ../../printerdrake.pm_.c:2906
 msgid "Do you want to configure another printer?"
 msgstr "Да ли хоћете да подесите још један штампач?"
 
-#: ../../printerdrake.pm_.c:2709
+#: ../../printerdrake.pm_.c:2733
 msgid "Modify printer configuration"
 msgstr "Измена конфигурације штампача"
 
-#: ../../printerdrake.pm_.c:2711
+#: ../../printerdrake.pm_.c:2735
 #, c-format
 msgid ""
 "Printer %s\n"
@@ -8876,101 +8868,101 @@ msgstr ""
 "Штампач %s\n"
 "Да ли хоћете да измените опције за овај штампач?"
 
-#: ../../printerdrake.pm_.c:2715
+#: ../../printerdrake.pm_.c:2739
 msgid "Do it!"
 msgstr "Уради то!"
 
-#: ../../printerdrake.pm_.c:2720 ../../printerdrake.pm_.c:2775
+#: ../../printerdrake.pm_.c:2744 ../../printerdrake.pm_.c:2799
 msgid "Printer connection type"
 msgstr "Тип конекције штампача"
 
-#: ../../printerdrake.pm_.c:2721 ../../printerdrake.pm_.c:2779
+#: ../../printerdrake.pm_.c:2745 ../../printerdrake.pm_.c:2803
 msgid "Printer name, description, location"
 msgstr "Име, опис и локација штампача"
 
-#: ../../printerdrake.pm_.c:2723 ../../printerdrake.pm_.c:2794
+#: ../../printerdrake.pm_.c:2747 ../../printerdrake.pm_.c:2818
 msgid "Printer manufacturer, model, driver"
 msgstr "Произвођач, модел и драјвер штампача"
 
-#: ../../printerdrake.pm_.c:2724 ../../printerdrake.pm_.c:2795
+#: ../../printerdrake.pm_.c:2748 ../../printerdrake.pm_.c:2819
 msgid "Printer manufacturer, model"
 msgstr "Произођач и модел штампача"
 
-#: ../../printerdrake.pm_.c:2733 ../../printerdrake.pm_.c:2805
+#: ../../printerdrake.pm_.c:2757 ../../printerdrake.pm_.c:2829
 msgid "Set this printer as the default"
 msgstr "Подеси овај штампач као default"
 
-#: ../../printerdrake.pm_.c:2735 ../../printerdrake.pm_.c:2810
+#: ../../printerdrake.pm_.c:2759 ../../printerdrake.pm_.c:2834
 msgid "Add this printer to Star Office/OpenOffice.org"
 msgstr "Додај овај штампач у Star Office/OpenOffice.org"
 
-#: ../../printerdrake.pm_.c:2736 ../../printerdrake.pm_.c:2819
+#: ../../printerdrake.pm_.c:2760 ../../printerdrake.pm_.c:2843
 msgid "Remove this printer from Star Office/OpenOffice.org"
 msgstr "Уклони овај штампач из Star Office/OpenOffice.org"
 
-#: ../../printerdrake.pm_.c:2737 ../../printerdrake.pm_.c:2828
+#: ../../printerdrake.pm_.c:2761 ../../printerdrake.pm_.c:2852
 msgid "Print test pages"
 msgstr "Иштампај тест странице"
 
-#: ../../printerdrake.pm_.c:2738 ../../printerdrake.pm_.c:2830
+#: ../../printerdrake.pm_.c:2762 ../../printerdrake.pm_.c:2854
 msgid "Know how to use this printer"
 msgstr "Да ли знате како да користите овај штампач"
 
-#: ../../printerdrake.pm_.c:2740 ../../printerdrake.pm_.c:2832
+#: ../../printerdrake.pm_.c:2764 ../../printerdrake.pm_.c:2856
 msgid "Remove printer"
 msgstr "Уклони штампaч"
 
-#: ../../printerdrake.pm_.c:2784
+#: ../../printerdrake.pm_.c:2808
 #, fuzzy, c-format
 msgid "Removing old printer \"%s\"..."
 msgstr "Уклањам стари штампач \"%s\" ..."
 
-#: ../../printerdrake.pm_.c:2808
+#: ../../printerdrake.pm_.c:2832
 msgid "Default printer"
 msgstr "Default штампач"
 
-#: ../../printerdrake.pm_.c:2809
+#: ../../printerdrake.pm_.c:2833
 #, c-format
 msgid "The printer \"%s\" is set as the default printer now."
 msgstr "Штампач  \"%s\" је сада постављен као default штампач."
 
-#: ../../printerdrake.pm_.c:2813 ../../printerdrake.pm_.c:2816
+#: ../../printerdrake.pm_.c:2837 ../../printerdrake.pm_.c:2840
 msgid "Adding printer to Star Office/OpenOffice.org"
 msgstr "Додајем штампач у Star Office/OpenOffice.org"
 
-#: ../../printerdrake.pm_.c:2814
+#: ../../printerdrake.pm_.c:2838
 #, c-format
 msgid ""
 "The printer \"%s\" was successfully added to Star Office/OpenOffice.org."
 msgstr "Штампач \"%s\" је успешно додан у Star Office/OpenOffice.org"
 
-#: ../../printerdrake.pm_.c:2817
+#: ../../printerdrake.pm_.c:2841
 #, c-format
 msgid "Failed to add the printer \"%s\" to Star Office/OpenOffice.org."
 msgstr "Неуспело додавање штампача \"%s\" у Star Office/OpenOffice.org"
 
-#: ../../printerdrake.pm_.c:2822 ../../printerdrake.pm_.c:2825
+#: ../../printerdrake.pm_.c:2846 ../../printerdrake.pm_.c:2849
 msgid "Removing printer from Star Office/OpenOffice.org"
 msgstr "Уклањање штампача из Star Office/OpenOffice.org"
 
-#: ../../printerdrake.pm_.c:2823
+#: ../../printerdrake.pm_.c:2847
 #, c-format
 msgid ""
 "The printer \"%s\" was successfully removed from Star Office/OpenOffice.org."
 msgstr "Штампач \"%s\" је успешно уклоњен из Star Office/OpenOffice.org-а"
 
-#: ../../printerdrake.pm_.c:2826
+#: ../../printerdrake.pm_.c:2850
 #, c-format
 msgid "Failed to remove the printer \"%s\" from Star Office/OpenOffice.org."
 msgstr ""
 "Неоспео покушај уклањања штампача \"%s\" из Star Office/OpenOffice.org-а"
 
-#: ../../printerdrake.pm_.c:2834
+#: ../../printerdrake.pm_.c:2858
 #, c-format
 msgid "Do you really want to remove the printer \"%s\"?"
 msgstr "Да ли хоћете да уклоните штампач \"%s\"?"
 
-#: ../../printerdrake.pm_.c:2836
+#: ../../printerdrake.pm_.c:2860
 #, fuzzy, c-format
 msgid "Removing printer \"%s\"..."
 msgstr "Уклањам штампач \"%s\" ..."
@@ -9075,10 +9067,6 @@ msgstr "mkraid неуспело (можда недостаjе raidtools ?)"
 msgid "Not enough partitions for RAID level %d\n"
 msgstr "Нема довољно партиција за RAID ниво %d\n"
 
-#: ../../security.pm_.c:30
-msgid "Setting security level"
-msgstr "Подешавање сигурносног нивоа"
-
 #: ../../services.pm_.c:14
 msgid "Launch the ALSA (Advanced Linux Sound Architecture) sound system"
 msgstr "Стартам ALSA (Advanced Linux Sound Architecture) систем за звук"
@@ -12344,12 +12332,12 @@ msgid ""
 "applications menu."
 msgstr ""
 
-#: ../../standalone/service_harddrake_.c:63
+#: ../../standalone/service_harddrake_.c:61
 #, c-format
 msgid "Some devices in the \"%s\" hardware class were removed:\n"
 msgstr ""
 
-#: ../../standalone/service_harddrake_.c:67
+#: ../../standalone/service_harddrake_.c:65
 #, c-format
 msgid ""
 "\n"
@@ -12912,20 +12900,15 @@ msgstr "Мултимедиja - CD пржeње"
 msgid "Scientific Workstation"
 msgstr "Научнa радна станицa"
 
+#~ msgid "Setting security level"
+#~ msgstr "Подешавање сигурносног нивоа"
+
 #~ msgid "Graphics card"
 #~ msgstr "Графичка картица"
 
 #~ msgid "Select a graphics card"
 #~ msgstr "Изаберите картицу"
 
-#, fuzzy
-#~ msgid "Choose a X driver"
-#~ msgstr "Изаберите X сервер"
-
-#, fuzzy
-#~ msgid "X driver"
-#~ msgstr "X сервер"
-
 #~ msgid "Warning: testing this graphics card may freeze your computer"
 #~ msgstr ""
 #~ "Упозорење: тестирање ове графичке картице може замрзнути вaш компjутер"
@@ -12966,18 +12949,6 @@ msgstr "Научнa радна станицa"
 #~ msgid "Monitor that can do 1600x1200 at 76 Hz"
 #~ msgstr "Монитор који ради са 1600x1200 на 76 Hz"
 
-#, fuzzy
-#~ msgid "DrakSec - Network Advanced Options"
-#~ msgstr "Напредне опције"
-
-#, fuzzy
-#~ msgid "DrakSec - User Advanced Options"
-#~ msgstr "Напредне опције"
-
-#, fuzzy
-#~ msgid "DrakSec - Server Advanced Options"
-#~ msgstr "Напредне опције"
-
 #~ msgid ""
 #~ "The total size for the groups you have selected is approximately %d MB.\n"
 #~ msgstr "Укупна величинa група коjе стe изабрали износи  %d MB.\n"
@@ -13016,13 +12987,5 @@ msgstr "Научнa радна станицa"
 #~ msgid "Percentage of packages to install"
 #~ msgstr "Проценат пакетa за инсталацију"
 
-#, fuzzy
-#~ msgid "Setting security user"
-#~ msgstr "Подешавање сигурносног нивоа"
-
-#, fuzzy
-#~ msgid "Setting security options"
-#~ msgstr "Подешавање сигурносног нивоа"
-
 #~ msgid "Please choose the desired security level."
 #~ msgstr "Изаберите сигурносни ниво"