updated pot file

1 files changed, 451 insertions, 334 deletions

diff --git a/perl-install/share/po/no.po b/perl-install/share/po/no.po
index 6c2abe867..c1ca54caa 100644
--- a/perl-install/share/po/no.po
+++ b/perl-install/share/po/no.po
@@ -10,7 +10,7 @@
 msgid ""
 msgstr ""
 "Project-Id-Version: DrakX-no\n"
-"POT-Creation-Date: 2003-06-16 15:42+0200\n"
+"POT-Creation-Date: 2003-06-26 22:24+0200\n"
 "PO-Revision-Date: 2003-03-13 06:52+0100\n"
 "Last-Translator: Per Øyvind Karlsen <peroyvind@sintrax.net>\n"
 "Language-Team: Norwegian Bokmål <cooker-i18n@linux-mandrake.com>\n"
@@ -29,6 +29,18 @@ msgstr "Skanner partisjoner for å finne monteringspunkter"
 msgid "if set to yes, check additions/removals of suid root files."
 msgstr "Sjekker tillegg/fjerning av suid root filer dersom satt til ja."
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid ""
+"%s: %s requires hostname, MAC address, IP, nbi-image, 0/1 for THIN_CLIENT, "
+"0/1 for Local Config...\n"
+msgstr ""
+
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Configuration changed - restart clusternfs/dhcpd?"
+msgstr ""
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "\t\tErase=%s"
@@ -991,6 +1003,11 @@ msgstr "Ikke skriv ut noen testside"
 msgid "Gurmukhi"
 msgstr "Gurmukhi"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "%s already in use\n"
+msgstr ""
+
 #: ../../any.pm:1
 #, c-format
 msgid "Force No APIC"
@@ -1193,6 +1210,11 @@ msgstr "rensesnitt"
 
 #: ../../standalone/drakbackup:1
 #, fuzzy, c-format
+msgid "Multisession CD"
+msgstr " (multisesjon)"
+
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
 msgid ""
 "Options Description:\n"
 "\n"
@@ -1343,6 +1365,11 @@ msgstr "Sveits"
 msgid "Brunei Darussalam"
 msgstr "Brunei Darussalam"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "You must be root to read configuration file. \n"
+msgstr "Ta sikkerhetskopi nå fra konfigurasjonsfil"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid "Remote lpd Printer Options"
@@ -1626,6 +1653,11 @@ msgstr "Bruk Unicode som standard"
 msgid "the module of the GNU/Linux kernel that handles the device"
 msgstr "modulen til GNU/Linux kjernen som håndterer den enheten"
 
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "DVDR device"
+msgstr "enhet"
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Trying to rescue partition table"
@@ -1831,6 +1863,11 @@ msgstr ""
 msgid "Harddrake2 version %s"
 msgstr "Harddrake2 versjon %s"
 
+#: ../../lang.pm:1
+#, c-format
+msgid "Swaziland"
+msgstr "Swaziland"
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Copying %s"
@@ -1846,21 +1883,11 @@ msgstr "Velg farge"
 msgid "Dominican Republic"
 msgstr "Dominikanske republikk"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "Swaziland"
-msgstr "Swaziland"
-
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "Set-UID"
 msgstr "Set-UID"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please check if you are using CDRW media"
-msgstr "Vennligst sjekk om du bruker et CDRW-medium"
-
 #: ../../help.pm:1
 #, fuzzy, c-format
 msgid ""
@@ -3144,6 +3171,13 @@ msgstr ""
 msgid "Package Group Selection"
 msgstr "Valg pakkegruppe"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"Allow local hardware\n"
+"configuration."
+msgstr "Automatisk omkonfigurasjon"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid "Restore Via Network Protocol: %s"
@@ -3433,6 +3467,11 @@ msgstr "Intet passord"
 msgid "Nigeria"
 msgstr "Nigeria"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "%s: %s requires hostname...\n"
+msgstr ""
+
 #: ../../install_interactive.pm:1
 #, c-format
 msgid "There is no existing partition to use"
@@ -5348,6 +5387,11 @@ msgstr ""
 msgid "Automatically find available printers on remote machines"
 msgstr "Finn tilgjengelige skrivere på andre maskiner automatisk"
 
+#: ../../lang.pm:1
+#, c-format
+msgid "East Timor"
+msgstr "Øst Timor"
+
 #: ../../standalone/drakbackup:1
 #, c-format
 msgid ""
@@ -5357,11 +5401,6 @@ msgstr ""
 "\n"
 "- Lagre til Tape på enhet: %s"
 
-#: ../../lang.pm:1
-#, c-format
-msgid "East Timor"
-msgstr "Øst Timor"
-
 #: ../../standalone/drakconnect:1
 #, c-format
 msgid "Del profile..."
@@ -5440,6 +5479,11 @@ msgstr "Alle språk"
 msgid "Removing %s"
 msgstr "Fjerner %s"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "%s not found...\n"
+msgstr "%s svarer ikke"
+
 #: ../../network/tools.pm:1 ../../standalone/drakconnect:1
 #, c-format
 msgid "Testing your connection..."
@@ -5822,6 +5866,300 @@ msgstr ""
 "s IP-adresse(r) og evt. portnummeret for å få skriver-informasjon fra "
 "tjeneren(e)."
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid ""
+"drakTermServ Overview\n"
+"\t\t\t   \n"
+"        - Create Etherboot Enabled Boot Images:\n"
+"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
+"must be created.\n"
+"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
+"graphical interface\n"
+"        \t\tto help manage/customize these images. To create the file \n"
+"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
+"include in \n"
+"        \t\tdhcpd.conf, you should create the etherboot images for at least "
+"one full kernel.\n"
+"\n"
+"        - Maintain /etc/dhcpd.conf:\n"
+"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
+"assigning an IP address\n"
+"        \t\tand net boot images to the machine. drakTermServ helps create/"
+"remove these entries.\n"
+"\t\t\t\n"
+"        \t\t(PCI cards may omit the image - etherboot will request the "
+"correct image. You should\n"
+"        \t\talso consider that when etherboot looks for the images, it "
+"expects names like\n"
+"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
+"like:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t\t#hdw_config                true;\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
+"entry for\n"
+"\t\t\ta client machine, using a fixed address scheme facilitates using the "
+"functionality\n"
+"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
+"either be 'thin'\n"
+"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
+"while fat clients run \n"
+"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
+"\\$IP=client_ip\\$\\$ is\n"
+"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
+"gdm.conf are \n"
+"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
+"security issues in \n"
+"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
+"to the local\n"
+"\t\t\tsubnet.\n"
+"\t\t\t\n"
+"\t\t\tNote: The \"#hdw_config\" entry is also only used by drakTermServ.  "
+"Clients can either \n"
+"\t\t\tbe 'true' or 'false'.  'true' enables root login at the client machine "
+"and allows local \n"
+"\t\t\thardware configuration of sound, mouse, and X, using the 'drak' tools. "
+"This is enabled \n"
+"\t\t\tby creating seperate config files associated with the client's IP "
+"address and creating \n"
+"\t\t\tread/write mount points to allow the client to alter the file. Once "
+"you are satisfied \n"
+"\t\t\twith the configuration, you can remove root login priviledges from the "
+"client.\n"
+"\t\t\t\n"
+"\t\t\tNote: You must stop/start the server after adding or changing "
+"clients.\n"
+"\t\t\t\n"
+"        - Maintain /etc/exports:\n"
+"        \t\tClusternfs allows export of the root filesystem to diskless "
+"clients. drakTermServ\n"
+"        \t\tsets up the correct entry to allow anonymous access to the root "
+"filesystem from\n"
+"        \t\tdiskless clients.\n"
+"\n"
+"        \t\tA typical exports entry for clusternfs is:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tWith SUBNET/MASK being defined for your network.\n"
+"        \t\t\n"
+"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor users to be able to log into the system from a diskless "
+"client, their entry in\n"
+"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
+"\\$. drakTermServ helps\n"
+"        \t\tin this respect by adding or removing system users from this "
+"file.\n"
+"\n"
+"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"        \t\tdrakTermServ will help create these files.\n"
+"\n"
+"        - Per client system configuration files:\n"
+"        \t\tThrough clusternfs, each diskless client can have it's own "
+"unique configuration files\n"
+"        \t\ton the root filesystem of the server. By allowing local client "
+"hardware configuration, \n"
+"\t\t\t\tclients can customize files such as /etc/modules.conf, /etc/"
+"sysconfig/mouse, \n"
+"        \t\t/etc/sysconfig/keyboard on a per-client basis.\n"
+"\n"
+"        Note: Enabling local client hardware configuration does enable root "
+"login to the terminal \n"
+"        server on each client machine that has this feature enabled.  Local "
+"configuration can be turned\n"
+"        back off, retaining the configuration files, once the client machine "
+"is configured.\n"
+"\t\t\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ will configure this file to work in conjunction "
+"with the images created by\n"
+"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
+"the boot image to each\n"
+"        \t\tdiskless client.\n"
+"\n"
+"        \t\tA typical tftp configuration file looks like:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tThe changes here from the default installation are changing the "
+"disable flag to\n"
+"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
+"mkinitrd-net\n"
+"        \t\tputs it's images.\n"
+"\n"
+"        - Create etherboot floppies/CDs:\n"
+"        \t\tThe diskless client machines need either ROM images on the NIC, "
+"or a boot floppy\n"
+"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
+"generate these images,\n"
+"        \t\tbased on the NIC in the client machine.\n"
+"        \t\t\n"
+"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
+"manually:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+msgstr ""
+"drakTermServ oversikt\n"
+"\t\t\t   \n"
+"        - Lag Etheroppstartsaktiverte oppstartsimagefiler:\n"
+"        \t\tFor å starte med en kjerne via etheroppstart, må en spesiell "
+"kjerne/initrd imagefil opprettes.\n"
+"        \t\tmkinitrd-net gjør mye av dette arbeidet og drakTermServ er bare "
+"et grafisk grensesnitt\n"
+"        \t\tfor å hjelpe til med å håndtere/endre på disse imagefilene.\n"
+"\n"
+"        - Vedlikehold /etc/dhcpd.conf:\n"
+"        \t\tFor å starte klientene over nettverk, hver klient trenger en "
+"entré i dhcpd.conf, som gir ut en IP-adresse\n"
+"        \t\tog nettverksoppstart imagefiler til maskinen. drakTermServ "
+"hjelper til med å lage//fjerne disse entréene.\n"
+"\t\t\t\n"
+"        \t\t(PCI-kort kan unnlate imagefilen - etherboot vil forespørre "
+"denriktige imagefilen. Du burde\n"
+"        \t\togså vurdere det når etherboot ser etter bildefilene, den "
+"forventer navn som\n"
+"        \t\tboot-3c59x.nbi, framfor boot-3c59x.2.4.19-16mdk.nbi).\n"
+"\t\t\t \n"
+"        \t\tEn typisk dhcpd.conf strofe for å støtte diskløse klienter "
+"serslik ut:\n"
+"        \t\t\n"
+"\t\t\t\thost curly {\n"
+"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
+"\t\t\t\t\tfixed-address              192.168.192.3;\n"
+"\t\t\t\t\t#type                          fat;\n"
+"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
+"nbi\";\n"
+"\t\t\t\t}\n"
+"\t\t\t\n"
+"\t\t\tMens du kan bruke en brønn av IP-adresse, framfor å sette opp en "
+"spesifikoppsettsentré for\n"
+"\t\t\ten klient maskin, ved bruk av faste adresseskjema som letter\n"
+"bruken\n"
+"\t\t\tav klientspesifike konfigurasjonsfiler som ClusterNFS tilbyr.\n"
+"\t\t\t\n"
+"\t\t\tMerk: \"#type\" entréen er bare brukt av drakTermServ.  Klienter "
+"kanenten være \"tynne\"\n"
+"\t\t\teller 'fete'.  Tynne klienter kjører mesteparten av programvaren via "
+"xdmcp, mens tykke klienter kjører mesteparten\n"
+"av programvaren på klientmaskinen. En spesiell inttab, /etc/inittab\\$\\"
+"$IP=client_ip\\$\\$ blir\n"
+"\t\t\tskrevet for tynne klienter. Systemkonfigurasjonsfilene xdm-config, "
+"kdmrc, og gdm.conf blir modifiserte\n"
+"\t\t\thvis tynne klienter blir brukt, for å aktivere xdmcp. Siden det er "
+"sikkerhetsproblematikkrundt bruken av xdmcp,\n"
+"\t\t\tså blir hosts.deny og hosts.allow endret for å begrense tilgangen til "
+"det lokale subnettet.\n"
+"\t\t\t\n"
+"\t\t\tMerk: Du må stoppe/starte tjeneren etter å ha lagt til eller "
+"endretklienter.\n"
+"\t\t\t\n"
+"        - Vedlikehold /etc/exports:\n"
+"        \t\tClusternfs lar deg eksportere rot-filsystemet til diskløse "
+"klienter, drakTermServ\n"
+"        \t\tsetter opp de riktige entréene for å tillate anonym tilgang "
+"tilrot-filsystemet fra\n"
+"        \t\tdiskløse klienter.\n"
+"\n"
+"        \t\tEn typisk eksportering-entré for clusternfs er:\n"
+"        \t\t\n"
+"        \t\t/                  (ro,all_squash)\n"
+"        \t\t/home              SUBNETT/MASKE(rw,root_squash)\n"
+"\t\t\t\n"
+"\t\t\tHvor SUBNETT/MASKE blir defintert for ditt nettverk.\n"
+"        \t\t\n"
+"        - Vedlikehold /etc/shadow\\$\\$CLIENT\\$\\$:\n"
+"        \t\tFor at brukere skal kunne logge inn på systemet fra en "
+"diskløsklient, så må deres entré i\n"
+"        \t\t/etc/shadow kopieres inn i /etc/shadow\\$\\$CLIENTS\\$\\$. "
+"drakTermServ hjelper til\n"
+"        \t\tved å legge til og slette brukere fra denne filen.\n"
+"\n"
+"        - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
+"        \t\tGjennom clusternfs så kan hver diskløse klient ha deres "
+"egneunike konfigurasjonsfil\n"
+"        \t\tpå rot filsystemet på tjeneren. I fremtiden vil drakTermServ "
+"kunne hjelpe til med å lage disse\n"
+"        \t\tfilene.\n"
+"\n"
+"        - Per klient systemkonfigurasjonsfiler:\n"
+"        \t\tGhennomclusternfs så hver diskløse klient ha deres egne unike "
+"konfigurasjonsfiler\n"
+"        \t\tpå rot-filesystemet på tjeneren. I fremtiden vil drakTermServ "
+"kunne hjelpe til med å opprette disse filene\n"
+"        \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
+"sysconfig/keyboard på per klient\n"
+"        \t\tbasis.\n"
+"\n"
+"        - /etc/xinetd.d/tftp:\n"
+"        \t\tdrakTermServ vil configure denne filen til å virke sammenmed "
+"imagefilene som blir opprettet av\n"
+"        \t\tmkinitrd-net, og entréene i /etc/dhcpd.conf, for å gi "
+"utnettverks oppstartsimagefilene til hver \n"
+"        \t\tdiskløse klient.\n"
+"\n"
+"        \t\tEn typisk tftp konfigurasjonsfil ser slik ut:\n"
+"        \t\t\n"
+"        \t\tservice tftp\n"
+"        \t\t(\n"
+"                        disable         = no\n"
+"                        socket_type  = dgram\n"
+"                        protocol        = udp\n"
+"                        wait             = yes\n"
+"                        user             = root\n"
+"                        server          = /usr/sbin/in.tftpd\n"
+"                        server_args  = -s /var/lib/tftpboot\n"
+"        \t\t}\n"
+"        \t\t\n"
+"        \t\tForandringen her fra den vanlige installasjonen er forandringen "
+"av disable flagget til\n"
+"        \t\t'no' og endring av filbanen til /var/lib/tftpboot, hvor mkinitrd-"
+"net\n"
+"        \t\tplassere sine imagefiler.\n"
+"\n"
+"        - Opprett etherboot disketter/CD'er:\n"
+"        \t\tDe diskløse klientmaskinene trenger enten ROM imagefiler på "
+"nettverkskortet, en oppstartsdiskket\n"
+"        \t\teller en CD for å initiere oppstartssekvensen.  drakTermServ vil "
+"hjelpe til med generere disse imagefilene,\n"
+"        \t\tbasert på nettverkskortet i klientmaskinen.\n"
+"        \t\t\n"
+"        \t\tEt basis eksempel på opprrettelse av en oppstartsdiskett for "
+"3Com 3c509 manuelt:\n"
+"        \t\t\n"
+"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
+"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
+" \n"
+"\n"
+
 #: ../../standalone/scannerdrake:1
 #, c-format
 msgid "%s is not in the scanner database, configure it manually?"
@@ -5888,16 +6226,16 @@ msgstr "Fullfør"
 msgid "Show automatically selected packages"
 msgstr "Vis automatisk valgte pakker"
 
-#: ../../standalone/harddrake2:1
-#, c-format
-msgid "CPU flags reported by the kernel"
-msgstr "Prosessorflagg rapportert av kjernen"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Togo"
 msgstr "Togo"
 
+#: ../../standalone/harddrake2:1
+#, c-format
+msgid "CPU flags reported by the kernel"
+msgstr "Prosessorflagg rapportert av kjernen"
+
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "Something went wrong! - Is mkisofs installed?"
@@ -6314,6 +6652,11 @@ msgstr ""
 msgid "Cd-Rom labeled \"%s\""
 msgstr "CD-ROMen ved navnet \"%s\""
 
+#: ../../standalone/drakbackup:1
+#, c-format
+msgid "CDRW media"
+msgstr ""
+
 #: ../../services.pm:1
 #, c-format
 msgid ""
@@ -7050,11 +7393,6 @@ msgstr "listen over alternative drivere for dette lydkortet"
 msgid "Gateway"
 msgstr "Gateway"
 
-#: ../../standalone/scannerdrake:1
-#, c-format
-msgid "Scanner sharing"
-msgstr "Scannerdeling"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Tonga"
@@ -7065,6 +7403,11 @@ msgstr "Tonga"
 msgid "Tunisia"
 msgstr "Tunisia"
 
+#: ../../standalone/scannerdrake:1
+#, c-format
+msgid "Scanner sharing"
+msgstr "Scannerdeling"
+
 #: ../../standalone/drakconnect:1
 #, c-format
 msgid "Profile: "
@@ -7303,11 +7646,6 @@ msgstr "Grafikk-kort: %s\n"
 msgid "Yaboot"
 msgstr "Yaboot"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please check if you are using a DVDRAM device"
-msgstr "Vennligst sjekk om du bruker en DVDRAM-enhet"
-
 #: ../../standalone/drakboot:1
 #, c-format
 msgid "Splash selection"
@@ -7805,16 +8143,16 @@ msgstr ", vert \"%s\", port %s"
 msgid "Monaco"
 msgstr "Monaco"
 
-#: ../../fs.pm:1
-#, c-format
-msgid "%s formatting of %s failed"
-msgstr "%s formatering av %s mislykket"
-
 #: ../../install_interactive.pm:1
 #, c-format
 msgid "Partitioning failed: %s"
 msgstr "Partisjonering feilet: %s"
 
+#: ../../fs.pm:1 ../../swap.pm:1
+#, c-format
+msgid "%s formatting of %s failed"
+msgstr "%s formatering av %s mislykket"
+
 #: ../../standalone/drakxtv:1
 #, c-format
 msgid "Canada (cable)"
@@ -7991,6 +8329,11 @@ msgstr "Tøm /tmp ved hver oppstart"
 msgid "Malawi"
 msgstr "Malawi"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "local config: false"
+msgstr "Lokale filer"
+
 #: ../../install_steps_interactive.pm:1
 #, c-format
 msgid "Please choose your type of mouse."
@@ -8865,6 +9208,11 @@ msgstr "Port: %s"
 msgid "Spain"
 msgstr "Spania"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "local config: %s"
+msgstr ""
+
 #: ../../any.pm:1
 #, c-format
 msgid "This user name has already been added"
@@ -8930,16 +9278,16 @@ msgstr ""
 "pen måte.\n"
 "Fortsett på eget ansvar."
 
-#: ../../standalone/logdrake:1
-#, c-format
-msgid "please wait, parsing file: %s"
-msgstr "vennligst vent, gjennomgår %s"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Taiwan"
 msgstr "Taiwan"
 
+#: ../../standalone/logdrake:1
+#, c-format
+msgid "please wait, parsing file: %s"
+msgstr "vennligst vent, gjennomgår %s"
+
 #: ../../lang.pm:1
 #, c-format
 msgid "Pakistan"
@@ -9014,6 +9362,11 @@ msgstr "Oppkoblingstype:"
 msgid "Graphical interface"
 msgstr "Grafisk grensesnitt"
 
+#: ../../lang.pm:1
+#, c-format
+msgid "Chad"
+msgstr "Chad"
+
 #: ../../Xconfig/card.pm:1 ../../Xconfig/various.pm:1
 #, c-format
 msgid "XFree %s with 3D hardware acceleration"
@@ -9026,11 +9379,6 @@ msgstr "India"
 
 #: ../../lang.pm:1
 #, c-format
-msgid "Chad"
-msgstr "Chad"
-
-#: ../../lang.pm:1
-#, c-format
 msgid "Slovakia"
 msgstr "Slovakia"
 
@@ -9913,6 +10261,11 @@ msgstr "Prosessorid-familie"
 msgid "32 MB"
 msgstr "32 MB"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "type: thin"
+msgstr "type: %s"
+
 #: ../../keyboard.pm:1
 #, c-format
 msgid "Lithuanian AZERTY (new)"
@@ -12383,6 +12736,11 @@ msgstr "Konfigurerer PCMCIA kort..."
 msgid "kdesu missing"
 msgstr "kdesu mangler"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "%s: %s requires a username...\n"
+msgstr ""
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "Encryption key"
@@ -14613,6 +14971,11 @@ msgstr "Rå skriver"
 msgid "official vendor name of the cpu"
 msgstr "Leverandørnavnet til prosessoren"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Useless without Terminal Server"
+msgstr ""
+
 #: ../../Xconfig/monitor.pm:1 ../../standalone/harddrake2:1
 #, c-format
 msgid "Vendor"
@@ -15341,11 +15704,6 @@ msgstr "TB"
 
 #: ../../standalone/drakbackup:1
 #, c-format
-msgid "Please check if you are using a DVDR device"
-msgstr "Vennligst sjekk om du bruker en DVDR-enhet"
-
-#: ../../standalone/drakbackup:1
-#, c-format
 msgid "FATAL"
 msgstr "FATALT"
 
@@ -15723,6 +16081,11 @@ msgstr "kompakt"
 msgid "1 minute"
 msgstr "1 minutt"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "type: fat"
+msgstr "type: %s"
+
 #: ../../diskdrake/interactive.pm:1
 #, c-format
 msgid "on channel %d id %d\n"
@@ -15958,6 +16321,11 @@ msgstr "Root passord"
 msgid "Build All Kernels -->"
 msgstr "Bygge alle kjerner -->"
 
+#: ../../standalone/drakbackup:1
+#, fuzzy, c-format
+msgid "DVDRAM device"
+msgstr "enhet"
+
 #: ../../security/help.pm:1
 #, c-format
 msgid "if set to yes, report unowned files."
@@ -16474,21 +16842,26 @@ msgstr "Deling av Internett tilkobling er slått på"
 msgid "Card IO_0"
 msgstr "Kort IO_0"
 
+#: ../../standalone/drakTermServ:1
+#, c-format
+msgid "Disable Local Config"
+msgstr ""
+
 #: ../../lang.pm:1
 #, c-format
 msgid "United Arab Emirates"
 msgstr "United Arab Emirates"
 
-#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
-#, c-format
-msgid "Card IO_1"
-msgstr "Kort IO_1"
-
 #: ../../lang.pm:1
 #, c-format
 msgid "Thailand"
 msgstr "Thailand"
 
+#: ../../network/tools.pm:1 ../../standalone/drakconnect:1
+#, c-format
+msgid "Card IO_1"
+msgstr "Kort IO_1"
+
 #: ../../standalone/drakTermServ:1
 #, c-format
 msgid "Routers:"
@@ -17864,6 +18237,11 @@ msgstr "kanskje"
 msgid "Panama"
 msgstr "Panama"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "Can't open %s!"
+msgstr "Klarer ikke å finne %s på %s"
+
 #: ../../Xconfig/various.pm:1
 #, c-format
 msgid ""
@@ -17990,6 +18368,11 @@ msgstr "Diskettformater diskettstasjonen tar"
 msgid "Not enough partitions for RAID level %d\n"
 msgstr "Ikke nok partisjoner for RAID nivå %d\n"
 
+#: ../../standalone/drakTermServ:1
+#, fuzzy, c-format
+msgid "local config: true"
+msgstr "ikke konfigurert"
+
 #: ../../printer/printerdrake.pm:1
 #, c-format
 msgid ""
@@ -18775,279 +19158,6 @@ msgstr "Du kan ikke bruke LVM logisk volum som monteringspunkt %s"
 msgid "Get Windows Fonts"
 msgstr "Få tak i Windows skrifttyper"
 
-#: ../../standalone/drakTermServ:1
-#, fuzzy, c-format
-msgid ""
-"drakTermServ Overview\n"
-"\t\t\t   \n"
-"        - Create Etherboot Enabled Boot Images:\n"
-"        \t\tTo boot a kernel via etherboot, a special kernel/initrd image "
-"must be created.\n"
-"        \t\tmkinitrd-net does much of this work and drakTermServ is just a "
-"graphical interface\n"
-"        \t\tto help manage/customize these images. To create the file \n"
-"        \t\t/etc/dhcpd.conf.etherboot-pcimap.include that is pulled in as an "
-"include in \n"
-"        \t\tdhcpd.conf, you should create the etherboot images for at least "
-"one full kernel.\n"
-"\n"
-"        - Maintain /etc/dhcpd.conf:\n"
-"        \t\tTo net boot clients, each client needs a dhcpd.conf entry, "
-"assigning an IP address\n"
-"        \t\tand net boot images to the machine. drakTermServ helps create/"
-"remove these entries.\n"
-"\t\t\t\n"
-"        \t\t(PCI cards may omit the image - etherboot will request the "
-"correct image. You should\n"
-"        \t\talso consider that when etherboot looks for the images, it "
-"expects names like\n"
-"        \t\tboot-3c59x.nbi, rather than boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tA typical dhcpd.conf stanza to support a diskless client looks "
-"like:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tWhile you can use a pool of IP addresses, rather than setup a specific "
-"entry for\n"
-"\t\t\ta client machine, using a fixed address scheme facilitates using the "
-"functionality\n"
-"\t\t\tof client-specific configuration files that ClusterNFS provides.\n"
-"\t\t\t\n"
-"\t\t\tNote: The \"#type\" entry is only used by drakTermServ.  Clients can "
-"either be \"thin\"\n"
-"\t\t\tor 'fat'.  Thin clients run most software on the server via xdmcp, "
-"while fat clients run \n"
-"\t\t\tmost software on the client machine. A special inittab, /etc/inittab\\$"
-"\\$IP=client_ip\\$\\$ is\n"
-"\t\t\twritten for thin clients. System config files xdm-config, kdmrc, and "
-"gdm.conf are \n"
-"\t\t\tmodified if thin clients are used, to enable xdmcp. Since there are "
-"security issues in \n"
-"\t\t\tusing xdmcp, hosts.deny and hosts.allow are modified to limit access "
-"to the local\n"
-"\t\t\tsubnet.\n"
-"\t\t\t\n"
-"\t\t\tNote: You must stop/start the server after adding or changing "
-"clients.\n"
-"\t\t\t\n"
-"        - Maintain /etc/exports:\n"
-"        \t\tClusternfs allows export of the root filesystem to diskless "
-"clients. drakTermServ\n"
-"        \t\tsets up the correct entry to allow anonymous access to the root "
-"filesystem from\n"
-"        \t\tdiskless clients.\n"
-"\n"
-"        \t\tA typical exports entry for clusternfs is:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNET/MASK(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tWith SUBNET/MASK being defined for your network.\n"
-"        \t\t\n"
-"        - Maintain /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor users to be able to log into the system from a diskless "
-"client, their entry in\n"
-"        \t\t/etc/shadow needs to be duplicated in /etc/shadow\\$\\$CLIENTS\\$"
-"\\$. drakTermServ helps\n"
-"        \t\tin this respect by adding or removing system users from this "
-"file.\n"
-"\n"
-"        - Per client /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future drakTermServ "
-"will help create these\n"
-"        \t\tfiles.\n"
-"\n"
-"        - Per client system configuration files:\n"
-"        \t\tThrough clusternfs, each diskless client can have it's own "
-"unique configuration files\n"
-"        \t\ton the root filesystem of the server. In the future, "
-"drakTermServ can help create files\n"
-"        \t\tsuch as /etc/modules.conf, /etc/sysconfig/mouse, /etc/sysconfig/"
-"keyboard on a\n"
-"        \t\tper-client basis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ will configure this file to work in conjunction "
-"with the images created by\n"
-"        \t\tmkinitrd-net, and the entries in /etc/dhcpd.conf, to serve up "
-"the boot image to each\n"
-"        \t\tdiskless client.\n"
-"\n"
-"        \t\tA typical tftp configuration file looks like:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tThe changes here from the default installation are changing the "
-"disable flag to\n"
-"        \t\t'no' and changing the directory path to /var/lib/tftpboot, where "
-"mkinitrd-net\n"
-"        \t\tputs it's images.\n"
-"\n"
-"        - Create etherboot floppies/CDs:\n"
-"        \t\tThe diskless client machines need either ROM images on the NIC, "
-"or a boot floppy\n"
-"        \t\tor CD to initate the boot sequence.  drakTermServ will help "
-"generate these images,\n"
-"        \t\tbased on the NIC in the client machine.\n"
-"        \t\t\n"
-"        \t\tA basic example of creating a boot floppy for a 3Com 3c509 "
-"manually:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-msgstr ""
-"drakTermServ oversikt\n"
-"\t\t\t   \n"
-"        - Lag Etheroppstartsaktiverte oppstartsimagefiler:\n"
-"        \t\tFor å starte med en kjerne via etheroppstart, må en spesiell "
-"kjerne/initrd imagefil opprettes.\n"
-"        \t\tmkinitrd-net gjør mye av dette arbeidet og drakTermServ er bare "
-"et grafisk grensesnitt\n"
-"        \t\tfor å hjelpe til med å håndtere/endre på disse imagefilene.\n"
-"\n"
-"        - Vedlikehold /etc/dhcpd.conf:\n"
-"        \t\tFor å starte klientene over nettverk, hver klient trenger en "
-"entré i dhcpd.conf, som gir ut en IP-adresse\n"
-"        \t\tog nettverksoppstart imagefiler til maskinen. drakTermServ "
-"hjelper til med å lage//fjerne disse entréene.\n"
-"\t\t\t\n"
-"        \t\t(PCI-kort kan unnlate imagefilen - etherboot vil forespørre "
-"denriktige imagefilen. Du burde\n"
-"        \t\togså vurdere det når etherboot ser etter bildefilene, den "
-"forventer navn som\n"
-"        \t\tboot-3c59x.nbi, framfor boot-3c59x.2.4.19-16mdk.nbi).\n"
-"\t\t\t \n"
-"        \t\tEn typisk dhcpd.conf strofe for å støtte diskløse klienter "
-"serslik ut:\n"
-"        \t\t\n"
-"\t\t\t\thost curly {\n"
-"\t\t\t\t\thardware ethernet        00:20:af:2f:f7:9d;\n"
-"\t\t\t\t\tfixed-address              192.168.192.3;\n"
-"\t\t\t\t\t#type                          fat;\n"
-"\t\t\t\t\tfilename                      \"i386/boot/boot-3c509.2.4.18-6mdk."
-"nbi\";\n"
-"\t\t\t\t}\n"
-"\t\t\t\n"
-"\t\t\tMens du kan bruke en brønn av IP-adresse, framfor å sette opp en "
-"spesifikoppsettsentré for\n"
-"\t\t\ten klient maskin, ved bruk av faste adresseskjema som letter\n"
-"bruken\n"
-"\t\t\tav klientspesifike konfigurasjonsfiler som ClusterNFS tilbyr.\n"
-"\t\t\t\n"
-"\t\t\tMerk: \"#type\" entréen er bare brukt av drakTermServ.  Klienter "
-"kanenten være \"tynne\"\n"
-"\t\t\teller 'fete'.  Tynne klienter kjører mesteparten av programvaren via "
-"xdmcp, mens tykke klienter kjører mesteparten\n"
-"av programvaren på klientmaskinen. En spesiell inttab, /etc/inittab\\$\\"
-"$IP=client_ip\\$\\$ blir\n"
-"\t\t\tskrevet for tynne klienter. Systemkonfigurasjonsfilene xdm-config, "
-"kdmrc, og gdm.conf blir modifiserte\n"
-"\t\t\thvis tynne klienter blir brukt, for å aktivere xdmcp. Siden det er "
-"sikkerhetsproblematikkrundt bruken av xdmcp,\n"
-"\t\t\tså blir hosts.deny og hosts.allow endret for å begrense tilgangen til "
-"det lokale subnettet.\n"
-"\t\t\t\n"
-"\t\t\tMerk: Du må stoppe/starte tjeneren etter å ha lagt til eller "
-"endretklienter.\n"
-"\t\t\t\n"
-"        - Vedlikehold /etc/exports:\n"
-"        \t\tClusternfs lar deg eksportere rot-filsystemet til diskløse "
-"klienter, drakTermServ\n"
-"        \t\tsetter opp de riktige entréene for å tillate anonym tilgang "
-"tilrot-filsystemet fra\n"
-"        \t\tdiskløse klienter.\n"
-"\n"
-"        \t\tEn typisk eksportering-entré for clusternfs er:\n"
-"        \t\t\n"
-"        \t\t/                  (ro,all_squash)\n"
-"        \t\t/home              SUBNETT/MASKE(rw,root_squash)\n"
-"\t\t\t\n"
-"\t\t\tHvor SUBNETT/MASKE blir defintert for ditt nettverk.\n"
-"        \t\t\n"
-"        - Vedlikehold /etc/shadow\\$\\$CLIENT\\$\\$:\n"
-"        \t\tFor at brukere skal kunne logge inn på systemet fra en "
-"diskløsklient, så må deres entré i\n"
-"        \t\t/etc/shadow kopieres inn i /etc/shadow\\$\\$CLIENTS\\$\\$. "
-"drakTermServ hjelper til\n"
-"        \t\tved å legge til og slette brukere fra denne filen.\n"
-"\n"
-"        - Per klient /etc/X11/XF86Config-4\\$\\$IP-ADDRESS\\$\\$:\n"
-"        \t\tGjennom clusternfs så kan hver diskløse klient ha deres "
-"egneunike konfigurasjonsfil\n"
-"        \t\tpå rot filsystemet på tjeneren. I fremtiden vil drakTermServ "
-"kunne hjelpe til med å lage disse\n"
-"        \t\tfilene.\n"
-"\n"
-"        - Per klient systemkonfigurasjonsfiler:\n"
-"        \t\tGhennomclusternfs så hver diskløse klient ha deres egne unike "
-"konfigurasjonsfiler\n"
-"        \t\tpå rot-filesystemet på tjeneren. I fremtiden vil drakTermServ "
-"kunne hjelpe til med å opprette disse filene\n"
-"        \t\tsom feks. /etc/modules.conf, /etc/sysconfig/mouse, /etc/"
-"sysconfig/keyboard på per klient\n"
-"        \t\tbasis.\n"
-"\n"
-"        - /etc/xinetd.d/tftp:\n"
-"        \t\tdrakTermServ vil configure denne filen til å virke sammenmed "
-"imagefilene som blir opprettet av\n"
-"        \t\tmkinitrd-net, og entréene i /etc/dhcpd.conf, for å gi "
-"utnettverks oppstartsimagefilene til hver \n"
-"        \t\tdiskløse klient.\n"
-"\n"
-"        \t\tEn typisk tftp konfigurasjonsfil ser slik ut:\n"
-"        \t\t\n"
-"        \t\tservice tftp\n"
-"        \t\t(\n"
-"                        disable         = no\n"
-"                        socket_type  = dgram\n"
-"                        protocol        = udp\n"
-"                        wait             = yes\n"
-"                        user             = root\n"
-"                        server          = /usr/sbin/in.tftpd\n"
-"                        server_args  = -s /var/lib/tftpboot\n"
-"        \t\t}\n"
-"        \t\t\n"
-"        \t\tForandringen her fra den vanlige installasjonen er forandringen "
-"av disable flagget til\n"
-"        \t\t'no' og endring av filbanen til /var/lib/tftpboot, hvor mkinitrd-"
-"net\n"
-"        \t\tplassere sine imagefiler.\n"
-"\n"
-"        - Opprett etherboot disketter/CD'er:\n"
-"        \t\tDe diskløse klientmaskinene trenger enten ROM imagefiler på "
-"nettverkskortet, en oppstartsdiskket\n"
-"        \t\teller en CD for å initiere oppstartssekvensen.  drakTermServ vil "
-"hjelpe til med generere disse imagefilene,\n"
-"        \t\tbasert på nettverkskortet i klientmaskinen.\n"
-"        \t\t\n"
-"        \t\tEt basis eksempel på opprrettelse av en oppstartsdiskett for "
-"3Com 3c509 manuelt:\n"
-"        \t\t\n"
-"        \t\tcat /usr/lib/etherboot/boot1a.bin \\\n"
-"        \t\t\t/usr/lib/etherboot/lzrom/3c509.lzrom > /dev/fd0\n"
-" \n"
-"\n"
-
 #: ../../mouse.pm:1
 #, c-format
 msgid "Mouse Systems"
@@ -19669,11 +19779,6 @@ msgstr ""
 "\t  av Andrew Weeks, Frank Siegert, Thomas Henlich, Sergey Babkin  \n"
 "             Konverter ttf skrifttypefiler til afm og pfb skrifttyper\n"
 
-#: ../../standalone/drakbackup:1
-#, c-format
-msgid "Please check for multisession CD"
-msgstr "Vennlligst sjekk etter multisesjons CD"
-
 #: ../../standalone/drakperm:1
 #, c-format
 msgid "user"
@@ -19999,6 +20104,18 @@ msgid "Set of tools to read and send mail and news and to browse the Web"
 msgstr ""
 "Sett med verktøy for å lese og sende e-post og nyheter for åsurfe på nett"
 
+#~ msgid "Please check if you are using CDRW media"
+#~ msgstr "Vennligst sjekk om du bruker et CDRW-medium"
+
+#~ msgid "Please check if you are using a DVDRAM device"
+#~ msgstr "Vennligst sjekk om du bruker en DVDRAM-enhet"
+
+#~ msgid "Please check if you are using a DVDR device"
+#~ msgstr "Vennligst sjekk om du bruker en DVDR-enhet"
+
+#~ msgid "Please check for multisession CD"
+#~ msgstr "Vennlligst sjekk etter multisesjons CD"
+
 #~ msgid "We are now going to configure the %s connection."
 #~ msgstr "Vi skal nå konfigurere din  %s tilkobling."